Remove slash delimiter from NavigationMesh properties

Remove slash delimiter from NavigationMesh properties.

2 files changed, 36 insertions, 36 deletions

diff --git a/doc/classes/NavigationMesh.xml b/doc/classes/NavigationMesh.xml
index bee459273b..3c18b56658 100644
--- a/doc/classes/NavigationMesh.xml
+++ b/doc/classes/NavigationMesh.xml
@@ -34,7 +34,7 @@
 			<return type="bool" />
 			<argument index="0" name="layer_number" type="int" />
 			<description>
-				Returns whether or not the specified layer of the [member geometry/collision_mask] is enabled, given a [code]layer_number[/code] between 1 and 32.
+				Returns whether or not the specified layer of the [member geometry_collision_mask] is enabled, given a [code]layer_number[/code] between 1 and 32.
 			</description>
 		</method>
 		<method name="get_polygon">
@@ -61,7 +61,7 @@
 			<argument index="0" name="layer_number" type="int" />
 			<argument index="1" name="value" type="bool" />
 			<description>
-				Based on [code]value[/code], enables or disables the specified layer in the [member geometry/collision_mask], given a [code]layer_number[/code] between 1 and 32.
+				Based on [code]value[/code], enables or disables the specified layer in the [member geometry_collision_mask], given a [code]layer_number[/code] between 1 and 32.
 			</description>
 		</method>
 		<method name="set_vertices">
@@ -73,75 +73,75 @@
 		</method>
 	</methods>
 	<members>
-		<member name="agent/height" type="float" setter="set_agent_height" getter="get_agent_height" default="1.5">
+		<member name="agent_height" type="float" setter="set_agent_height" getter="get_agent_height" default="1.5">
 			The minimum floor to ceiling height that will still allow the floor area to be considered walkable.
-			[b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell/height].
+			[b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell_height].
 		</member>
-		<member name="agent/max_climb" type="float" setter="set_agent_max_climb" getter="get_agent_max_climb" default="0.25">
+		<member name="agent_max_climb" type="float" setter="set_agent_max_climb" getter="get_agent_max_climb" default="0.25">
 			The minimum ledge height that is considered to still be traversable.
-			[b]Note:[/b] While baking, this value will be rounded down to the nearest multiple of [member cell/height].
+			[b]Note:[/b] While baking, this value will be rounded down to the nearest multiple of [member cell_height].
 		</member>
-		<member name="agent/max_slope" type="float" setter="set_agent_max_slope" getter="get_agent_max_slope" default="45.0">
+		<member name="agent_max_slope" type="float" setter="set_agent_max_slope" getter="get_agent_max_slope" default="45.0">
 			The maximum slope that is considered walkable, in degrees.
 		</member>
-		<member name="agent/radius" type="float" setter="set_agent_radius" getter="get_agent_radius" default="0.5">
+		<member name="agent_radius" type="float" setter="set_agent_radius" getter="get_agent_radius" default="0.5">
 			The distance to erode/shrink the walkable area of the heightfield away from obstructions.
-			[b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell/size].
+			[b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell_size].
 		</member>
-		<member name="cell/height" type="float" setter="set_cell_height" getter="get_cell_height" default="0.25">
+		<member name="cell_height" type="float" setter="set_cell_height" getter="get_cell_height" default="0.25">
 			The Y axis cell size to use for fields.
 		</member>
-		<member name="cell/size" type="float" setter="set_cell_size" getter="get_cell_size" default="0.25">
+		<member name="cell_size" type="float" setter="set_cell_size" getter="get_cell_size" default="0.25">
 			The XZ plane cell size to use for fields.
 		</member>
-		<member name="detail/sample_distance" type="float" setter="set_detail_sample_distance" getter="get_detail_sample_distance" default="6.0">
+		<member name="detail_sample_distance" type="float" setter="set_detail_sample_distance" getter="get_detail_sample_distance" default="6.0">
 			The sampling distance to use when generating the detail mesh, in cell unit.
 		</member>
-		<member name="detail/sample_max_error" type="float" setter="set_detail_sample_max_error" getter="get_detail_sample_max_error" default="1.0">
+		<member name="detail_sample_max_error" type="float" setter="set_detail_sample_max_error" getter="get_detail_sample_max_error" default="1.0">
 			The maximum distance the detail mesh surface should deviate from heightfield, in cell unit.
 		</member>
-		<member name="edge/max_error" type="float" setter="set_edge_max_error" getter="get_edge_max_error" default="1.3">
+		<member name="edge_max_error" type="float" setter="set_edge_max_error" getter="get_edge_max_error" default="1.3">
 			The maximum distance a simplfied contour's border edges should deviate the original raw contour.
 		</member>
-		<member name="edge/max_length" type="float" setter="set_edge_max_length" getter="get_edge_max_length" default="12.0">
+		<member name="edge_max_length" type="float" setter="set_edge_max_length" getter="get_edge_max_length" default="12.0">
 			The maximum allowed length for contour edges along the border of the mesh.
-			[b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell/size].
+			[b]Note:[/b] While baking, this value will be rounded up to the nearest multiple of [member cell_size].
 		</member>
-		<member name="filter/filter_walkable_low_height_spans" type="bool" setter="set_filter_walkable_low_height_spans" getter="get_filter_walkable_low_height_spans" default="false">
-			If [code]true[/code], marks walkable spans as not walkable if the clearance above the span is less than [member agent/height].
-		</member>
-		<member name="filter/ledge_spans" type="bool" setter="set_filter_ledge_spans" getter="get_filter_ledge_spans" default="false">
+		<member name="filter_ledge_spans" type="bool" setter="set_filter_ledge_spans" getter="get_filter_ledge_spans" default="false">
 			If [code]true[/code], marks spans that are ledges as non-walkable.
 		</member>
-		<member name="filter/low_hanging_obstacles" type="bool" setter="set_filter_low_hanging_obstacles" getter="get_filter_low_hanging_obstacles" default="false">
-			If [code]true[/code], marks non-walkable spans as walkable if their maximum is within [member agent/max_climb] of a walkable neighbor.
+		<member name="filter_low_hanging_obstacles" type="bool" setter="set_filter_low_hanging_obstacles" getter="get_filter_low_hanging_obstacles" default="false">
+			If [code]true[/code], marks non-walkable spans as walkable if their maximum is within [member agent_max_climb] of a walkable neighbor.
+		</member>
+		<member name="filter_walkable_low_height_spans" type="bool" setter="set_filter_walkable_low_height_spans" getter="get_filter_walkable_low_height_spans" default="false">
+			If [code]true[/code], marks walkable spans as not walkable if the clearance above the span is less than [member agent_height].
 		</member>
-		<member name="geometry/collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask">
+		<member name="geometry_collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask" default="4294967295">
 			The physics layers to scan for static colliders.
-			Only used when [member geometry/parsed_geometry_type] is [constant PARSED_GEOMETRY_STATIC_COLLIDERS] or [constant PARSED_GEOMETRY_BOTH].
+			Only used when [member geometry_parsed_geometry_type] is [constant PARSED_GEOMETRY_STATIC_COLLIDERS] or [constant PARSED_GEOMETRY_BOTH].
 		</member>
-		<member name="geometry/parsed_geometry_type" type="int" setter="set_parsed_geometry_type" getter="get_parsed_geometry_type" enum="NavigationMesh.ParsedGeometryType" default="0">
+		<member name="geometry_parsed_geometry_type" type="int" setter="set_parsed_geometry_type" getter="get_parsed_geometry_type" enum="NavigationMesh.ParsedGeometryType" default="0">
 			Determines which type of nodes will be parsed as geometry. See [enum ParsedGeometryType] for possible values.
 		</member>
-		<member name="geometry/source_geometry_mode" type="int" setter="set_source_geometry_mode" getter="get_source_geometry_mode" enum="NavigationMesh.SourceGeometryMode" default="0">
+		<member name="geometry_source_geometry_mode" type="int" setter="set_source_geometry_mode" getter="get_source_geometry_mode" enum="NavigationMesh.SourceGeometryMode" default="0">
 			The source of the geometry used when baking. See [enum SourceGeometryMode] for possible values.
 		</member>
-		<member name="geometry/source_group_name" type="StringName" setter="set_source_group_name" getter="get_source_group_name">
+		<member name="geometry_source_group_name" type="StringName" setter="set_source_group_name" getter="get_source_group_name" default="&amp;&quot;navmesh&quot;">
 			The name of the group to scan for geometry.
-			Only used when [member geometry/source_geometry_mode] is [constant SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant SOURCE_GEOMETRY_GROUPS_EXPLICIT].
+			Only used when [member geometry_source_geometry_mode] is [constant SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant SOURCE_GEOMETRY_GROUPS_EXPLICIT].
 		</member>
-		<member name="polygon/verts_per_poly" type="float" setter="set_verts_per_poly" getter="get_verts_per_poly" default="6.0">
+		<member name="polygon_verts_per_poly" type="float" setter="set_verts_per_poly" getter="get_verts_per_poly" default="6.0">
 			The maximum number of vertices allowed for polygons generated during the contour to polygon conversion process.
 		</member>
-		<member name="region/merge_size" type="float" setter="set_region_merge_size" getter="get_region_merge_size" default="20.0">
+		<member name="region_merge_size" type="float" setter="set_region_merge_size" getter="get_region_merge_size" default="20.0">
 			Any regions with a size smaller than this will be merged with larger regions if possible.
 			[b]Note:[/b] This value will be squared to calculate the number of cells. For example, a value of 20 will set the number of cells to 400.
 		</member>
-		<member name="region/min_size" type="float" setter="set_region_min_size" getter="get_region_min_size" default="2.0">
+		<member name="region_min_size" type="float" setter="set_region_min_size" getter="get_region_min_size" default="2.0">
 			The minimum size of a region for it to be created.
 			[b]Note:[/b] This value will be squared to calculate the minimum number of cells allowed to form isolated island areas. For example, a value of 8 will set the number of cells to 64.
 		</member>
-		<member name="sample_partition_type/sample_partition_type" type="int" setter="set_sample_partition_type" getter="get_sample_partition_type" enum="NavigationMesh.SamplePartitionType" default="0">
+		<member name="sample_partition_type" type="int" setter="set_sample_partition_type" getter="get_sample_partition_type" enum="NavigationMesh.SamplePartitionType" default="0">
 			Partitioning algorithm for creating the navigation mesh polys. See [enum SamplePartitionType] for possible values.
 		</member>
 	</members>
@@ -162,7 +162,7 @@
 			Parses mesh instances as geometry. This includes [MeshInstance3D], [CSGShape3D], and [GridMap] nodes.
 		</constant>
 		<constant name="PARSED_GEOMETRY_STATIC_COLLIDERS" value="1" enum="ParsedGeometryType">
-			Parses [StaticBody3D] colliders as geometry. The collider should be in any of the layers specified by [member geometry/collision_mask].
+			Parses [StaticBody3D] colliders as geometry. The collider should be in any of the layers specified by [member geometry_collision_mask].
 		</constant>
 		<constant name="PARSED_GEOMETRY_BOTH" value="2" enum="ParsedGeometryType">
 			Both [constant PARSED_GEOMETRY_MESH_INSTANCES] and [constant PARSED_GEOMETRY_STATIC_COLLIDERS].
@@ -174,10 +174,10 @@
 			Scans the child nodes of [NavigationRegion3D] recursively for geometry.
 		</constant>
 		<constant name="SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN" value="1" enum="SourceGeometryMode">
-			Scans nodes in a group and their child nodes recursively for geometry. The group is specified by [member geometry/source_group_name].
+			Scans nodes in a group and their child nodes recursively for geometry. The group is specified by [member geometry_source_group_name].
 		</constant>
 		<constant name="SOURCE_GEOMETRY_GROUPS_EXPLICIT" value="2" enum="SourceGeometryMode">
-			Uses nodes in a group for geometry. The group is specified by [member geometry/source_group_name].
+			Uses nodes in a group for geometry. The group is specified by [member geometry_source_group_name].
 		</constant>
 		<constant name="SOURCE_GEOMETRY_MAX" value="3" enum="SourceGeometryMode">
 			Represents the size of the [enum SourceGeometryMode] enum.
diff --git a/doc/classes/NavigationMeshGenerator.xml b/doc/classes/NavigationMeshGenerator.xml
index 36588ce2f5..b92183fda0 100644
--- a/doc/classes/NavigationMeshGenerator.xml
+++ b/doc/classes/NavigationMeshGenerator.xml
@@ -17,7 +17,7 @@
 			<argument index="0" name="nav_mesh" type="NavigationMesh" />
 			<argument index="1" name="root_node" type="Node" />
 			<description>
-				Bakes navigation data to the provided [code]nav_mesh[/code] by parsing child nodes under the provided [code]root_node[/code] or a specific group of nodes for potential source geometry. The parse behavior can be controlled with the [member NavigationMesh.geometry/parsed_geometry_type] and [member NavigationMesh.geometry/source_geometry_mode] properties on the [NavigationMesh] resource.
+				Bakes navigation data to the provided [code]nav_mesh[/code] by parsing child nodes under the provided [code]root_node[/code] or a specific group of nodes for potential source geometry. The parse behavior can be controlled with the [member NavigationMesh.geometry_parsed_geometry_type] and [member NavigationMesh.geometry_source_geometry_mode] properties on the [NavigationMesh] resource.
 			</description>
 		</method>
 		<method name="clear">