i18n: Sync classref translations with Weblate

(cherry picked from commit 37f6fff7ae7b8b5be2dd23f0e7a730e24490c3a7)

1 files changed, 136 insertions, 66 deletions

diff --git a/doc/translations/sv.po b/doc/translations/sv.po
index f6e68b0231..fb7be00495 100644
--- a/doc/translations/sv.po
+++ b/doc/translations/sv.po
@@ -3324,8 +3324,12 @@ msgstr ""
 #: doc/classes/@GlobalScope.xml
 msgid ""
 "Hints that an integer, float or string property is an enumerated value to "
-"pick in a list specified via a hint string such as [code]\"Hello,Something,"
-"Else\"[/code]."
+"pick in a list specified via a hint string.\n"
+"The hint string is a comma separated list of names such as [code]\"Hello,"
+"Something,Else\"[/code]. For integer and float properties, the first name in "
+"the list has value 0, the next 1, and so on. Explicit values can also be "
+"specified by appending [code]:integer[/code] to the name, e.g. [code]\"Zero,"
+"One,Three:3,Four,Six:6\"[/code]."
 msgstr ""
 
 #: doc/classes/@GlobalScope.xml
@@ -5237,8 +5241,11 @@ msgstr ""
 
 #: doc/classes/AnimationNodeBlendTree.xml
 msgid ""
-"This node may contain a sub-tree of any other blend type nodes, such as mix, "
-"blend2, blend3, one shot, etc. This is one of the most commonly used roots."
+"This node may contain a sub-tree of any other blend type nodes, such as "
+"[AnimationNodeTransition], [AnimationNodeBlend2], [AnimationNodeBlend3], "
+"[AnimationNodeOneShot], etc. This is one of the most commonly used roots.\n"
+"An [AnimationNodeOutput] node named [code]output[/code] is created by "
+"default."
 msgstr ""
 
 #: doc/classes/AnimationNodeBlendTree.xml
@@ -10357,8 +10364,15 @@ msgstr ""
 
 #: doc/classes/BakedLightmap.xml
 msgid ""
-"When enabled, the lightmapper will merge the textures for all meshes into a "
-"single large layered texture. Not supported in GLES2."
+"If [code]true[/code], the lightmapper will merge the textures for all meshes "
+"into one or several large layered textures. If [code]false[/code], every "
+"mesh will get its own lightmap texture, which is less efficient.\n"
+"[b]Note:[/b] Atlas lightmap rendering is only supported in GLES3, [i]not[/i] "
+"GLES2. Non-atlas lightmap rendering is supported by both GLES3 and GLES2. If "
+"[member ProjectSettings.rendering/quality/driver/fallback_to_gles2] is "
+"[code]true[/code], consider baking lightmaps with [member atlas_generate] "
+"set to [code]false[/code] so that the resulting lightmap is visible in both "
+"GLES3 and GLES2."
 msgstr ""
 
 #: doc/classes/BakedLightmap.xml
@@ -12506,14 +12520,15 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"If [code]enable[/code] is [code]true[/code], children will be updated with "
-"local transform data."
+"If [code]enable[/code] is [code]true[/code], this node will receive "
+"[constant NOTIFICATION_LOCAL_TRANSFORM_CHANGED] when its local transform "
+"changes."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"If [code]enable[/code] is [code]true[/code], children will be updated with "
-"global transform data."
+"If [code]enable[/code] is [code]true[/code], this node will receive "
+"[constant NOTIFICATION_TRANSFORM_CHANGED] when its global transform changes."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -12627,9 +12642,14 @@ msgstr ""
 
 #: doc/classes/CanvasItem.xml
 msgid ""
-"The [CanvasItem]'s transform has changed. This notification is only received "
-"if enabled by [method set_notify_transform] or [method "
-"set_notify_local_transform]."
+"The [CanvasItem]'s global transform has changed. This notification is only "
+"received if enabled by [method set_notify_transform]."
+msgstr ""
+
+#: doc/classes/CanvasItem.xml
+msgid ""
+"The [CanvasItem]'s local transform has changed. This notification is only "
+"received if enabled by [method set_notify_local_transform]."
 msgstr ""
 
 #: doc/classes/CanvasItem.xml
@@ -19591,9 +19611,8 @@ msgid ""
 "main font.\n"
 "DynamicFont uses the [url=https://www.freetype.org/]FreeType[/url] library "
 "for rasterization. Supported formats are TrueType ([code].ttf[/code]), "
-"OpenType ([code].otf[/code]) and Web Open Font Format 1 ([code].woff[/"
-"code]). Web Open Font Format 2 ([code].woff2[/code]) is [i]not[/i] "
-"supported.\n"
+"OpenType ([code].otf[/code]), Web Open Font Format 1 ([code].woff[/code]), "
+"and  Web Open Font Format 2 ([code].woff2[/code]).\n"
 "[codeblock]\n"
 "var dynamic_font = DynamicFont.new()\n"
 "dynamic_font.font_data = load(\"res://BarlowCondensed-Bold.ttf\")\n"
@@ -22383,12 +22402,13 @@ msgstr ""
 #: doc/classes/EditorVCSInterface.xml
 msgid ""
 "Helper function to create a commit [Dictionary] item. [code]msg[/code] is "
-"the commit message of the commit. [code]author[/code] is a human-readable "
-"string containing the author's details, e.g. the email and name configured "
-"in the VCS. [code]id[/code] is the identifier of the commit, in whichever "
-"format your VCS may provide an identifier to commits. [code]date[/code] is "
-"directly added to the commit item and displayed in the editor, and hence, it "
-"shall be a well-formatted, human-readable date string."
+"the commit message of the commit. [code]author[/code] is a single human-"
+"readable string containing all the author's details, e.g. the email and name "
+"configured in the VCS. [code]id[/code] is the identifier of the commit, in "
+"whichever format your VCS may provide an identifier to commits. "
+"[code]unix_timestamp[/code] is the UTC Unix timestamp of when the commit was "
+"created. [code]offset_minutes[/code] is the timezone offset in minutes, "
+"recorded from the system timezone where the commit was created."
 msgstr ""
 
 #: doc/classes/EditorVCSInterface.xml
@@ -28972,9 +28992,9 @@ msgid ""
 "Returns a value between 0 and 1 representing the raw intensity of the given "
 "action, ignoring the action's deadzone. In most cases, you should use "
 "[method get_action_strength] instead.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers "
-"for [InputEventKey] and [InputEventMouseButton] events, and the direction "
-"for [InputEventJoypadMotion] events."
+"If [code]exact[/code] is [code]false[/code], it ignores additional input "
+"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
+"direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -28984,9 +29004,9 @@ msgid ""
 "or L2, R2 triggers) is from the dead zone, the closer the value will be to "
 "1. If the action is mapped to a control that has no axis as the keyboard, "
 "the value returned will be 0 or 1.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers "
-"for [InputEventKey] and [InputEventMouseButton] events, and the direction "
-"for [InputEventJoypadMotion] events."
+"If [code]exact[/code] is [code]false[/code], it ignores additional input "
+"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
+"direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -29119,9 +29139,9 @@ msgid ""
 "the button.\n"
 "This is useful for code that needs to run only once when an action is "
 "pressed, instead of every frame while it's pressed.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers "
-"for [InputEventKey] and [InputEventMouseButton] events, and the direction "
-"for [InputEventJoypadMotion] events.\n"
+"If [code]exact[/code] is [code]false[/code], it ignores additional input "
+"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
+"direction for [InputEventJoypadMotion] events.\n"
 "[b]Note:[/b] Due to keyboard ghosting, [method is_action_just_pressed] may "
 "return [code]false[/code] even if one of the action's keys is pressed. See "
 "[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
@@ -29133,9 +29153,9 @@ msgid ""
 "Returns [code]true[/code] when the user stops pressing the action event, "
 "meaning it's [code]true[/code] only on the frame that the user released the "
 "button.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers "
-"for [InputEventKey] and [InputEventMouseButton] events, and the direction "
-"for [InputEventJoypadMotion] events."
+"If [code]exact[/code] is [code]false[/code], it ignores additional input "
+"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
+"direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/Input.xml
@@ -29144,9 +29164,9 @@ msgid ""
 "an action has multiple buttons assigned and more than one of them is "
 "pressed, releasing one button will release the action, even if some other "
 "button assigned to this action is still pressed.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores the input modifiers "
-"for [InputEventKey] and [InputEventMouseButton] events, and the direction "
-"for [InputEventJoypadMotion] events.\n"
+"If [code]exact[/code] is [code]false[/code], it ignores additional input "
+"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
+"direction for [InputEventJoypadMotion] events.\n"
 "[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return "
 "[code]false[/code] even if one of the action's keys is pressed. See "
 "[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
@@ -29496,18 +29516,18 @@ msgstr ""
 msgid ""
 "Returns a value between 0.0 and 1.0 depending on the given actions' state. "
 "Useful for getting the value of events of type [InputEventJoypadMotion].\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores the input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
+"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
+"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
+"the direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/InputEvent.xml
 msgid ""
 "Returns [code]true[/code] if this input event matches a pre-defined action "
 "of any type.\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores the input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
+"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
+"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
+"the direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/InputEvent.xml
@@ -29516,9 +29536,9 @@ msgid ""
 "an echo event for [InputEventKey] events, unless [code]allow_echo[/code] is "
 "[code]true[/code]). Not relevant for events of type [InputEventMouseMotion] "
 "or [InputEventScreenDrag].\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores the input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events.\n"
+"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
+"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
+"the direction for [InputEventJoypadMotion] events.\n"
 "[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return "
 "[code]false[/code] even if one of the action's keys is pressed. See "
 "[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
@@ -29530,9 +29550,9 @@ msgid ""
 "Returns [code]true[/code] if the given action is released (i.e. not "
 "pressed). Not relevant for events of type [InputEventMouseMotion] or "
 "[InputEventScreenDrag].\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores the input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
+"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
+"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
+"the direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/InputEvent.xml
@@ -29563,9 +29583,9 @@ msgid ""
 "event. Only valid for action events i.e key ([InputEventKey]), button "
 "([InputEventMouseButton] or [InputEventJoypadButton]), axis "
 "[InputEventJoypadMotion] or action ([InputEventAction]) events.\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores the input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
+"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
+"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
+"the direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/InputEvent.xml
@@ -30095,9 +30115,9 @@ msgid ""
 "This method ignores keyboard modifiers if the given [InputEvent] is not "
 "pressed (for proper release detection). See [method action_has_event] if you "
 "don't want this behavior.\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores the input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
+"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
+"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
+"the direction for [InputEventJoypadMotion] events."
 msgstr ""
 
 #: doc/classes/InputMap.xml
@@ -33933,6 +33953,39 @@ msgid "Returns the number of surface materials."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
+msgid ""
+"Returns [code]true[/code] if this [MeshInstance] can be merged with the "
+"specified [code]other_mesh_instance[/code], using the [method MeshInstance."
+"merge_meshes] function.\n"
+"In order to be mergeable, properties of the [MeshInstance] must match, and "
+"each surface must match, in terms of material, attributes and vertex format."
+msgstr ""
+
+#: doc/classes/MeshInstance.xml
+msgid ""
+"This function can merge together the data from several source "
+"[MeshInstance]s into a single destination [MeshInstance] (the MeshInstance "
+"the function is called from). This is primarily useful for improving "
+"performance by reducing the number of drawcalls and [Node]s.\n"
+"Merging should only be attempted for simple meshes that do not contain "
+"animation.\n"
+"The final vertices can either be returned in global space, or in local space "
+"relative to the destination [MeshInstance] global transform (the destination "
+"Node must be inside the [SceneTree] for local space to work).\n"
+"The function will make a final check for compatibility between the "
+"[MeshInstance]s by default, this should always be used unless you have "
+"previously checked for compatibility using [method MeshInstance."
+"is_mergeable_with]. If the compatibility check is omitted and the meshes are "
+"merged, you may see rendering errors.\n"
+"[b]Note:[/b] The requirements for similarity between meshes are quite "
+"stringent. They can be checked using the [method MeshInstance."
+"is_mergeable_with] function prior to calling [method MeshInstance."
+"merge_meshes].\n"
+"Also note that any initial data in the destination [MeshInstance] data will "
+"be discarded."
+msgstr ""
+
+#: doc/classes/MeshInstance.xml
 msgid "Sets the [Material] for a surface of the [Mesh] resource."
 msgstr ""
 
@@ -36385,12 +36438,12 @@ msgid ""
 "[/codeblock]\n"
 "[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you "
 "must set [member owner] in addition to calling [method add_child]. This is "
-"typically relevant for [url=https://godot.readthedocs.io/en/3.2/tutorials/"
-"misc/running_code_in_the_editor.html]tool scripts[/url] and [url=https://"
-"godot.readthedocs.io/en/latest/tutorials/plugins/editor/index.html]editor "
-"plugins[/url]. If [method add_child] is called without setting [member "
-"owner], the newly added [Node] will not be visible in the scene tree, though "
-"it will be visible in the 2D/3D view."
+"typically relevant for [url=$DOCS_URL/tutorials/misc/"
+"running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/"
+"tutorials/plugins/editor/index.html]editor plugins[/url]. If [method "
+"add_child] is called without setting [member owner], the newly added [Node] "
+"will not be visible in the scene tree, though it will be visible in the "
+"2D/3D view."
 msgstr ""
 
 #: doc/classes/Node.xml
@@ -37097,7 +37150,15 @@ msgid ""
 "valid parent, grandparent, etc. ascending in the tree). When saving a node "
 "(using [PackedScene]), all the nodes it owns will be saved with it. This "
 "allows for the creation of complex [SceneTree]s, with instancing and "
-"subinstancing."
+"subinstancing.\n"
+"[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you "
+"must set [member owner] in addition to calling [method add_child]. This is "
+"typically relevant for [url=$DOCS_URL/tutorials/misc/"
+"running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/"
+"tutorials/plugins/editor/index.html]editor plugins[/url]. If [method "
+"add_child] is called without setting [member owner], the newly added [Node] "
+"will not be visible in the scene tree, though it will be visible in the "
+"2D/3D view."
 msgstr ""
 
 #: doc/classes/Node.xml
@@ -37693,7 +37754,13 @@ msgid ""
 msgstr ""
 
 #: doc/classes/Object.xml
-msgid "Called when the object is initialized."
+msgid ""
+"Called when the object is initialized in memory. Can be defined to take in "
+"parameters, that are passed in when constructing.\n"
+"[b]Note:[/b] If [method _init] is defined with required parameters, then "
+"explicit construction is the only valid means of creating an Object of the "
+"class. If any other means (such as [method PackedScene.instance]) is used, "
+"then initialization will fail."
 msgstr ""
 
 #: doc/classes/Object.xml
@@ -42937,7 +43004,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/PhysicsServer.xml
-msgid "Returns an Info defined by the [enum ProcessInfo] input given."
+msgid ""
+"Returns information about the current state of the 3D physics engine. See "
+"[enum ProcessInfo] for a list of available states. Only implemented for "
+"Godot Physics."
 msgstr ""
 
 #: doc/classes/PhysicsServer.xml
@@ -55861,8 +55931,8 @@ msgid ""
 "var some_string = \"One,Two,Three,Four\"\n"
 "var some_array = some_string.rsplit(\",\", true, 1)\n"
 "print(some_array.size()) # Prints 2\n"
-"print(some_array[0]) # Prints \"Four\"\n"
-"print(some_array[1]) # Prints \"Three,Two,One\"\n"
+"print(some_array[0]) # Prints \"One,Two,Three\"\n"
+"print(some_array[1]) # Prints \"Four\"\n"
 "[/codeblock]"
 msgstr ""