i18n: Sync classref translations with Weblate

(cherry picked from commit c93ccb5d1da8f4a01646b6f29a5ad0e87381b027)

1 files changed, 282 insertions, 94 deletions

diff --git a/doc/translations/gl.po b/doc/translations/gl.po
index 92ad8f3f22..39d5ab2f2b 100644
--- a/doc/translations/gl.po
+++ b/doc/translations/gl.po
@@ -395,7 +395,7 @@ msgid ""
 "- 1.0: Linear\n"
 "- Greater than 1.0 (exclusive): Ease in\n"
 "[/codeblock]\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.4/img/"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
 "ease_cheatsheet.png]ease() curve values cheatsheet[/url]\n"
 "See also [method smoothstep]. If you need to perform more advanced "
 "transitions, use [Tween] or [AnimationPlayer]."
@@ -1102,7 +1102,7 @@ msgid ""
 "[method smoothstep] returns the smoothest possible curve with no sudden "
 "changes in the derivative. If you need to perform more advanced transitions, "
 "use [Tween] or [AnimationPlayer].\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.4/img/"
+"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
 "smoothstep_ease_comparison.png]Comparison between smoothstep() and ease(x, "
 "-1.6521) return values[/url]"
 msgstr ""
@@ -28262,7 +28262,7 @@ msgid ""
 "    # Note: Don't make simultaneous requests using a single HTTPRequest "
 "node.\n"
 "    # The snippet below is provided for reference only.\n"
-"    var body = {\"name\": \"Godette\"}\n"
+"    var body = to_json({\"name\": \"Godette\"})\n"
 "    error = http_request.request(\"https://httpbin.org/post\", [], true, "
 "HTTPClient.METHOD_POST, body)\n"
 "    if error != OK:\n"
@@ -30884,7 +30884,18 @@ msgid ""
 "[code]\\n[/code]) in the string won't produce a newline. Text wrapping is "
 "enabled in [constant ICON_MODE_TOP] mode, but column's width is adjusted to "
 "fully fit its content by default. You need to set [member "
-"fixed_column_width] greater than zero to wrap the text."
+"fixed_column_width] greater than zero to wrap the text.\n"
+"[b]Incremental search:[/b] Like [PopupMenu] and [Tree], [ItemList] supports "
+"searching within the list while the control is focused. Press a key that "
+"matches the first letter of an item's name to select the first item starting "
+"with the given letter. After that point, there are two ways to perform "
+"incremental search: 1) Press the same key again before the timeout duration "
+"to select the next item starting with the same letter. 2) Press letter keys "
+"that match the rest of the word before the timeout duration to match to "
+"select the item in question directly. Both of these actions will be reset to "
+"the beginning of the list if the timeout duration has passed since the last "
+"keystroke was registered. You can adjust the timeout duration by changing "
+"[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
 msgstr ""
 
 #: doc/classes/ItemList.xml
@@ -34631,11 +34642,16 @@ msgid ""
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
-msgid "Returns the [Material] for a surface of the [Mesh] resource."
+msgid ""
+"Returns the override [Material] for a surface of the [Mesh] resource.\n"
+"[b]Note:[/b] This function only returns [i]override[/i] materials associated "
+"with this [MeshInstance]. Consider using [method get_active_material] or "
+"[method Mesh.surface_get_material] to get materials associated with the "
+"[Mesh] resource."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
-msgid "Returns the number of surface materials."
+msgid "Returns the number of surface override materials."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -34672,7 +34688,10 @@ msgid ""
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
-msgid "Sets the [Material] for a surface of the [Mesh] resource."
+msgid ""
+"Sets the override [Material] for the specified surface of the [Mesh] "
+"resource. This material is associated with this [MeshInstance] rather than "
+"with the [Mesh] resource."
 msgstr ""
 
 #: doc/classes/MeshInstance.xml
@@ -35464,6 +35483,9 @@ msgstr ""
 
 #: doc/classes/Navigation.xml
 msgid ""
+"[i]Deprecated.[/i] [Navigation] node and [method get_simple_path] are "
+"deprecated and will be removed in a future version. Use [method "
+"NavigationServer.map_get_path] instead.\n"
 "Provides navigation and pathfinding within a collection of "
 "[NavigationMesh]es. By default, these will be automatically collected from "
 "child [NavigationMeshInstance] nodes. In addition to basic pathfinding, this "
@@ -35509,6 +35531,9 @@ msgstr ""
 
 #: doc/classes/Navigation.xml
 msgid ""
+"[i]Deprecated.[/i] [Navigation] node and [method get_simple_path] are "
+"deprecated and will be removed in a future version. Use [method "
+"NavigationServer.map_get_path] instead.\n"
 "Returns the path between two given points. Points are in local coordinate "
 "space. If [code]optimize[/code] is [code]true[/code] (the default), the "
 "agent properties associated with each [NavigationMesh] (radius, height, "
@@ -35552,6 +35577,9 @@ msgstr ""
 
 #: doc/classes/Navigation2D.xml
 msgid ""
+"[i]Deprecated.[/i] [Navigation2D] node and [method get_simple_path] are "
+"deprecated and will be removed in a future version. Use [method "
+"Navigation2DServer.map_get_path] instead.\n"
 "Navigation2D provides navigation and pathfinding within a 2D area, specified "
 "as a collection of [NavigationPolygon] resources. By default, these are "
 "automatically collected from child [NavigationPolygonInstance] nodes."
@@ -35571,6 +35599,9 @@ msgstr ""
 
 #: doc/classes/Navigation2D.xml
 msgid ""
+"[i]Deprecated.[/i] [Navigation2D] node and [method get_simple_path] are "
+"deprecated and will be removed in a future version. Use [method "
+"Navigation2DServer.map_get_path] instead.\n"
 "Returns the path between two given points. Points are in local coordinate "
 "space. If [code]optimize[/code] is [code]true[/code] (the default), the path "
 "is smoothed by merging path segments where possible."
@@ -35700,11 +35731,47 @@ msgid "Destroys the given RID."
 msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
+msgid ""
+"Returns all created navigation map [RID]s on the NavigationServer. This "
+"returns both 2D and 3D created navigation maps as there is technically no "
+"distinction between them."
+msgstr ""
+
+#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Create a new map."
 msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid ""
+"This function immediately forces synchronization of the specified navigation "
+"[code]map[/code] [RID]. By default navigation maps are only synchronized at "
+"the end of each physics frame. This function can be used to immediately "
+"(re)calculate all the navigation meshes and region connections of the "
+"navigation map. This makes it possible to query a navigation path for a "
+"changed map immediately and in the same frame (multiple times if needed).\n"
+"Due to technical restrictions the current NavigationServer command queue "
+"will be flushed. This means all already queued update commands for this "
+"physics frame will be executed, even those intended for other maps, regions "
+"and agents not part of the specified map. The expensive computation of the "
+"navigation meshes and region connections of a map will only be done for the "
+"specified map. Other maps will receive the normal synchronization at the end "
+"of the physics frame. Should the specified map receive changes after the "
+"forced update it will update again as well when the other maps receive their "
+"update.\n"
+"Avoidance processing and dispatch of the [code]safe_velocity[/code] signals "
+"is untouched by this function and continues to happen for all maps and "
+"agents at the end of the physics frame.\n"
+"[b]Note:[/b] With great power comes great responsibility. This function "
+"should only be used by users that really know what they are doing and have a "
+"good reason for it. Forcing an immediate update of a navigation map requires "
+"locking the NavigationServer and flushing the entire NavigationServer "
+"command queue. Not only can this severely impact the performance of a game "
+"but it can also introduce bugs if used inappropriately without much "
+"foresight."
+msgstr ""
+
+#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
+msgid ""
 "Returns all navigation agents [RID]s that are currently assigned to the "
 "requested navigation [code]map[/code]."
 msgstr ""
@@ -35814,6 +35881,23 @@ msgid "Returns the [code]travel_cost[/code] of this [code]region[/code]."
 msgstr ""
 
 #: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
+msgid ""
+"Returns [code]true[/code] if the provided [code]point[/code] in world space "
+"is currently owned by the provided navigation [code]region[/code]. Owned in "
+"this context means that one of the region's navigation mesh polygon faces "
+"has a possible position at the closest distance to this point compared to "
+"all other navigation meshes from other navigation regions that are also "
+"registered on the navigation map of the provided region.\n"
+"If multiple navigation meshes have positions at equal distance the "
+"navigation region whose polygons are processed first wins the ownership. "
+"Polygons are processed in the same order that navigation regions were "
+"registered on the NavigationServer.\n"
+"[b]Note:[/b] If navigation meshes from different navigation regions overlap "
+"(which should be avoided in general) the result might not be what is "
+"expected."
+msgstr ""
+
+#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
 msgid "Sets the [code]enter_cost[/code] for this [code]region[/code]."
 msgstr ""
 
@@ -36020,20 +36104,40 @@ msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
+"The distance threshold before a path point is considered to be reached. This "
+"will allow an agent to not have to hit a path point on the path exactly, but "
+"in the area. If this value is set to high the NavigationAgent will skip "
+"points on the path which can lead to leaving the navigation mesh. If this "
+"value is set to low the NavigationAgent will be stuck in a repath loop cause "
+"it will constantly overshoot or undershoot the distance to the next point on "
+"each physics frame update."
+msgstr ""
+
+#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
+msgid ""
 "The maximum distance the agent is allowed away from the ideal path to the "
 "final location. This can happen due to trying to avoid collisions. When the "
 "maximum distance is exceeded, it recalculates the ideal path."
 msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid "The radius of the agent."
+msgid ""
+"The radius of the avoidance agent. This is the \"body\" of the avoidance "
+"agent and not the avoidance maneuver starting radius (which is controlled by "
+"[member neighbor_dist]).\n"
+"Does not affect normal pathfinding. To change an actor's pathfinding radius "
+"bake [NavigationMesh] resources with a different [member NavigationMesh."
+"agent_radius] property and use different navigation maps for each actor size."
 msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
 msgid ""
-"The distance threshold before a target is considered to be reached. This "
-"will allow an agent to not have to hit a point on the path exactly, but in "
-"the area."
+"The distance threshold before the final target point is considered to be "
+"reached. This will allow an agent to not have to hit the point of the final "
+"target exactly, but only the area. If this value is set to low the "
+"NavigationAgent will be stuck in a repath loop cause it will constantly "
+"overshoot or undershoot the distance to the final target point on each "
+"physics frame update."
 msgstr ""
 
 #: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
@@ -36247,6 +36351,16 @@ msgid ""
 msgstr ""
 
 #: doc/classes/NavigationMesh.xml
+msgid ""
+"If the baking [AABB] has a volume the navigation mesh baking will be "
+"restricted to its enclosing area."
+msgstr ""
+
+#: doc/classes/NavigationMesh.xml
+msgid "The position offset applied to the [member filter_baking_aabb] [AABB]."
+msgstr ""
+
+#: doc/classes/NavigationMesh.xml
 msgid "If [code]true[/code], marks spans that are ledges as non-walkable."
 msgstr ""
 
@@ -36416,7 +36530,15 @@ msgid ""
 "geometry for walkable terrain suitable to [NavigationMesh] agent properties "
 "by creating a voxel world around the meshes bounding area.\n"
 "The finalized navigation mesh is then returned and stored inside the "
-"[NavigationMesh] for use as a resource inside [NavigationMeshInstance] nodes."
+"[NavigationMesh] for use as a resource inside [NavigationMeshInstance] "
+"nodes.\n"
+"[b]Note:[/b] Using meshes to not only define walkable surfaces but also "
+"obstruct navigation baking does not always work. The navigation baking has "
+"no concept of what is a geometry \"inside\" when dealing with mesh source "
+"geometry and this is intentional. Depending on current baking parameters, as "
+"soon as the obstructing mesh is large enough to fit a navigation mesh area "
+"inside, the baking will generate navigation mesh areas that are inside the "
+"obstructing source geometry mesh."
 msgstr ""
 
 #: doc/classes/NavigationMeshGenerator.xml
@@ -38291,13 +38413,19 @@ msgstr ""
 #: doc/classes/Node.xml
 msgid ""
 "Emitted when a child node enters the scene tree, either because it entered "
-"on its own or because this node entered with it."
+"on its own or because this node entered with it.\n"
+"This signal is emitted [i]after[/i] the child node's own [constant "
+"NOTIFICATION_ENTER_TREE] and [signal tree_entered]."
 msgstr ""
 
 #: doc/classes/Node.xml
 msgid ""
-"Emitted when a child node exits the scene tree, either because it exited on "
-"its own or because this node exited."
+"Emitted when a child node is about to exit the scene tree, either because it "
+"is being removed or freed directly, or because this node is exiting the "
+"tree.\n"
+"When this signal is received, the child [code]node[/code] is still in the "
+"tree and valid. This signal is emitted [i]after[/i] the child node's own "
+"[signal tree_exiting] and [constant NOTIFICATION_EXIT_TREE]."
 msgstr ""
 
 #: doc/classes/Node.xml
@@ -38309,7 +38437,10 @@ msgid "Emitted when the node is renamed."
 msgstr ""
 
 #: doc/classes/Node.xml
-msgid "Emitted when the node enters the tree."
+msgid ""
+"Emitted when the node enters the tree.\n"
+"This signal is emitted [i]after[/i] the related [constant "
+"NOTIFICATION_ENTER_TREE] notification."
 msgstr ""
 
 #: doc/classes/Node.xml
@@ -38319,15 +38450,21 @@ msgstr ""
 #: doc/classes/Node.xml
 msgid ""
 "Emitted when the node is still active but about to exit the tree. This is "
-"the right place for de-initialization (or a \"destructor\", if you will)."
+"the right place for de-initialization (or a \"destructor\", if you will).\n"
+"This signal is emitted [i]before[/i] the related [constant "
+"NOTIFICATION_EXIT_TREE] notification."
 msgstr ""
 
 #: doc/classes/Node.xml
-msgid "Notification received when the node enters a [SceneTree]."
+msgid ""
+"Notification received when the node enters a [SceneTree].\n"
+"This notification is emitted [i]before[/i] the related [signal tree_entered]."
 msgstr ""
 
 #: doc/classes/Node.xml
-msgid "Notification received when the node is about to exit a [SceneTree]."
+msgid ""
+"Notification received when the node is about to exit a [SceneTree].\n"
+"This notification is emitted [i]after[/i] the related [signal tree_exiting]."
 msgstr ""
 
 #: doc/classes/Node.xml
@@ -40034,6 +40171,10 @@ msgid ""
 "    if argument.find(\"=\") > -1:\n"
 "        var key_value = argument.split(\"=\")\n"
 "        arguments[key_value[0].lstrip(\"--\")] = key_value[1]\n"
+"    else:\n"
+"        # Options without an argument will be present in the dictionary,\n"
+"        # with the value set to an empty string.\n"
+"        arguments[argument.lstrip(\"--\")] = \"\"\n"
 "[/codeblock]"
 msgstr ""
 
@@ -45534,7 +45675,18 @@ msgstr ""
 #: doc/classes/PopupMenu.xml
 msgid ""
 "[PopupMenu] is a [Control] that displays a list of options. They are popular "
-"in toolbars or context menus."
+"in toolbars or context menus.\n"
+"[b]Incremental search:[/b] Like [ItemList] and [Tree], [PopupMenu] supports "
+"searching within the list while the control is focused. Press a key that "
+"matches the first letter of an item's name to select the first item starting "
+"with the given letter. After that point, there are two ways to perform "
+"incremental search: 1) Press the same key again before the timeout duration "
+"to select the next item starting with the same letter. 2) Press letter keys "
+"that match the rest of the word before the timeout duration to match to "
+"select the item in question directly. Both of these actions will be reset to "
+"the beginning of the list if the timeout duration has passed since the last "
+"keystroke was registered. You can adjust the timeout duration by changing "
+"[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
 msgstr ""
 
 #: doc/classes/PopupMenu.xml
@@ -49107,20 +49259,28 @@ msgid ""
 "cause.\n"
 "The default value is a conservative one, so you are advised to tweak it "
 "according to the hardware you are targeting.\n"
-"[b]Note:[/b] This setting is only meaningful if [code]rendering/gles3/"
-"shaders/shader_compilation_mode[/code] is [b]not[/b] [code]Synchronous[/"
-"code]."
+"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
+"shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
-"The default is a very conservative override for [code]rendering/gles3/"
-"shaders/max_concurrent_compiles[/code].\n"
+"The default is a very conservative override for [member rendering/gles3/"
+"shaders/max_simultaneous_compiles].\n"
 "Depending on the specific devices you are targeting, you may want to raise "
 "it.\n"
-"[b]Note:[/b] This setting is only meaningful if [code]rendering/gles3/"
-"shaders/shader_compilation_mode[/code] is [b]not[/b] [code]Synchronous[/"
-"code]."
+"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
+"shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
+msgstr ""
+
+#: doc/classes/ProjectSettings.xml
+msgid ""
+"The default is a very conservative override for [member rendering/gles3/"
+"shaders/max_simultaneous_compiles].\n"
+"Depending on the specific browsers you are targeting, you may want to raise "
+"it.\n"
+"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
+"shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49128,19 +49288,28 @@ msgid ""
 "The maximum size, in megabytes, that the ubershader cache can grow up to. On "
 "startup, the least recently used entries will be deleted until the total "
 "size is within bounds.\n"
-"[b]Note:[/b] This setting is only meaningful if [code]rendering/gles3/"
-"shaders/shader_compilation_mode[/code] is set to [code]Asynchronous + Cache[/"
-"code]."
+"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
+"shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
-"An override for [code]rendering/gles3/shaders/ubershader_cache_size_mb[/"
-"code], so a smaller maximum size can be configured for mobile platforms, "
-"where storage space is more limited.\n"
-"[b]Note:[/b] This setting is only meaningful if [code]rendering/gles3/"
-"shaders/shader_compilation_mode[/code] is set to [code]Asynchronous + Cache[/"
-"code]."
+"An override for [member rendering/gles3/shaders/shader_cache_size_mb], so a "
+"smaller maximum size can be configured for mobile platforms, where storage "
+"space is more limited.\n"
+"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
+"shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
+msgstr ""
+
+#: doc/classes/ProjectSettings.xml
+msgid ""
+"An override for [member rendering/gles3/shaders/shader_cache_size_mb], so a "
+"smaller maximum size can be configured for web platforms, where storage "
+"space is more limited.\n"
+"[b]Note:[/b] Currently, shader caching is generally unavailable on web "
+"platforms.\n"
+"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
+"shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
@@ -49172,14 +49341,22 @@ msgstr ""
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
-"An override for [code]rendering/gles3/shaders/shader_compilation_mode[/"
-"code], so asynchronous compilation can be disabled for mobile.\n"
+"An override for [member rendering/gles3/shaders/shader_compilation_mode], so "
+"asynchronous compilation can be disabled on mobile platforms.\n"
 "You may want to do that since mobile GPUs generally won't support "
 "ubershaders due to their complexity."
 msgstr ""
 
 #: doc/classes/ProjectSettings.xml
 msgid ""
+"An override for [member rendering/gles3/shaders/shader_compilation_mode], so "
+"asynchronous compilation can be disabled on web platforms.\n"
+"You may want to do that since certain browsers (especially on mobile "
+"platforms) generally won't support ubershaders due to their complexity."
+msgstr ""
+
+#: doc/classes/ProjectSettings.xml
+msgid ""
 "Max buffer size for blend shapes. Any blend shape bigger than this will not "
 "work."
 msgstr ""
@@ -53868,24 +54045,23 @@ msgid ""
 "manually (i.e. by using [code]Tween.new()[/code]) are invalid. They can't be "
 "used for tweening values, but you can do manual interpolation with [method "
 "interpolate_value].\n"
-"A [SceneTreeTween] animation is composed of a sequence of [Tweener]s, which "
-"by default are executed one after another. You can create a sequence by "
-"appending [Tweener]s to the [SceneTreeTween]. Animating something with a "
-"[Tweener] is called tweening. Example tweening sequence looks like this:\n"
+"A tween animation is created by adding [Tweener]s to the [SceneTreeTween] "
+"object, using [method tween_property], [method tween_interval], [method "
+"tween_callback] or [method tween_method]:\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween()\n"
 "tween.tween_property($Sprite, \"modulate\", Color.red, 1)\n"
 "tween.tween_property($Sprite, \"scale\", Vector2(), 1)\n"
 "tween.tween_callback($Sprite, \"queue_free\")\n"
 "[/codeblock]\n"
-"This sequence will make the [code]$Sprite[/code] node turn red, then shrink "
-"and finally the [method Node.queue_free] is called to remove the sprite. See "
-"methods [method tween_property], [method tween_interval], [method "
-"tween_callback] and [method tween_method] for more usage information.\n"
+"This sequence will make the [code]$Sprite[/code] node turn red, then shrink, "
+"before finally calling [method Node.queue_free] to free the sprite. "
+"[Tweener]s are executed one after another by default. This behavior can be "
+"changed using [method parallel] and [method set_parallel].\n"
 "When a [Tweener] is created with one of the [code]tween_*[/code] methods, a "
 "chained method call can be used to tweak the properties of this [Tweener]. "
-"For example, if you want to set different transition type in the above "
-"example, you can do:\n"
+"For example, if you want to set a different transition type in the above "
+"example, you can use [method set_trans]:\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween()\n"
 "tween.tween_property($Sprite, \"modulate\", Color.red, 1).set_trans(Tween."
@@ -53894,8 +54070,9 @@ msgid ""
 "TRANS_BOUNCE)\n"
 "tween.tween_callback($Sprite, \"queue_free\")\n"
 "[/codeblock]\n"
-"Most of the [SceneTreeTween] methods can be chained this way too. In this "
-"example the [SceneTreeTween] is bound and have set a default transition:\n"
+"Most of the [SceneTreeTween] methods can be chained this way too. In the "
+"following example the [SceneTreeTween] is bound to the running script's node "
+"and a default transition is set for its [Tweener]s:\n"
 "[codeblock]\n"
 "var tween = get_tree().create_tween().bind_node(self).set_trans(Tween."
 "TRANS_ELASTIC)\n"
@@ -53903,16 +54080,16 @@ msgid ""
 "tween.tween_property($Sprite, \"scale\", Vector2(), 1)\n"
 "tween.tween_callback($Sprite, \"queue_free\")\n"
 "[/codeblock]\n"
-"Another interesting use for [SceneTreeTween]s is animating arbitrary set of "
+"Another interesting use for [SceneTreeTween]s is animating arbitrary sets of "
 "objects:\n"
 "[codeblock]\n"
 "var tween = create_tween()\n"
 "for sprite in get_children():\n"
-"    tween.tween_property(sprite, \"position\", Vector2(), 1)\n"
+"    tween.tween_property(sprite, \"position\", Vector2(0, 0), 1)\n"
 "[/codeblock]\n"
 "In the example above, all children of a node are moved one after another to "
 "position (0, 0).\n"
-"Some [Tweener]s use transitions and eases. The first accepts an [enum Tween."
+"Some [Tweener]s use transitions and eases. The first accepts a [enum Tween."
 "TransitionType] constant, and refers to the way the timing of the animation "
 "is handled (see [url=https://easings.net/]easings.net[/url] for some "
 "examples). The second accepts an [enum Tween.EaseType] constant, and "
@@ -53924,7 +54101,7 @@ msgid ""
 "tween_cheatsheet.png]Tween easing and transition types cheatsheet[/url]\n"
 "[b]Note:[/b] All [SceneTreeTween]s will automatically start by default. To "
 "prevent a [SceneTreeTween] from autostarting, you can call [method stop] "
-"immediately after it was created."
+"immediately after it is created."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -53954,21 +54131,24 @@ msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
 msgid ""
-"Processes the [SceneTreeTween] by given [code]delta[/code] value, in "
-"seconds. Mostly useful when the [SceneTreeTween] is paused, for controlling "
-"it manually. Can also be used to end the [SceneTreeTween] animation "
-"immediately, by using [code]delta[/code] longer than the whole duration.\n"
+"Processes the [SceneTreeTween] by the given [code]delta[/code] value, in "
+"seconds. This is mostly useful for manual control when the [SceneTreeTween] "
+"is paused. It can also be used to end the [SceneTreeTween] animation "
+"immediately, by setting [code]delta[/code] longer than the whole duration of "
+"the [SceneTreeTween] animation.\n"
 "Returns [code]true[/code] if the [SceneTreeTween] still has [Tweener]s that "
 "haven't finished.\n"
-"[b]Note:[/b] The [SceneTreeTween] will become invalid after finished, but "
-"you can call [method stop] after the step, to keep it and reset."
+"[b]Note:[/b] The [SceneTreeTween] will become invalid in the next processing "
+"frame after its animation finishes. Calling [method stop] after performing "
+"[method custom_step] instead keeps and resets the [SceneTreeTween]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
 msgid ""
 "Returns the total time in seconds the [SceneTreeTween] has been animating (i."
-"e. time since it started, not counting pauses etc.). The time is affected by "
-"[method set_speed_scale] and [method stop] will reset it to [code]0[/code].\n"
+"e. the time since it started, not counting pauses etc.). The time is "
+"affected by [method set_speed_scale], and [method stop] will reset it to "
+"[code]0[/code].\n"
 "[b]Note:[/b] As it results from accumulating frame deltas, the time returned "
 "after the [SceneTreeTween] has finished animating will be slightly greater "
 "than the actual [SceneTreeTween] duration."
@@ -54004,11 +54184,10 @@ msgstr ""
 msgid ""
 "Returns whether the [SceneTreeTween] is valid. A valid [SceneTreeTween] is a "
 "[SceneTreeTween] contained by the scene tree (i.e. the array from [method "
-"SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). "
-"[SceneTreeTween] might become invalid when it has finished tweening or was "
-"killed, also when created with [code]Tween.new()[/code]. Invalid "
-"[SceneTreeTween] can't have [Tweener]s appended, because it can't animate "
-"them. You can however still use [method interpolate_value]."
+"SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
+"[SceneTreeTween] might become invalid when it has finished tweening, is "
+"killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
+"[SceneTreeTween]s can't have [Tweener]s appended."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54048,16 +54227,15 @@ msgstr ""
 msgid ""
 "Sets the number of times the tweening sequence will be repeated, i.e. "
 "[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [SceneTreeTween] run "
-"infinitely, until it is either killed by [method kill] or by freeing bound "
-"node, or all the animated objects have been freed (which makes further "
+"Calling this method without arguments will make the [Tween] run infinitely, "
+"until either it is killed with [method kill], the [Tween]'s bound node is "
+"freed, or all the animated objects have been freed (which makes further "
 "animation impossible).\n"
 "[b]Warning:[/b] Make sure to always add some duration/delay when using "
-"infinite loops. 0-duration looped animations (e.g. single [CallbackTweener] "
-"with no delay or [PropertyTweener] with invalid node) are equivalent to "
-"infinite [code]while[/code] loops and will freeze your game. If a "
-"[SceneTreeTween]'s lifetime depends on some node, always use [method "
-"bind_node]."
+"infinite loops. To prevent the game freezing, 0-duration looped animations "
+"(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
+"number of loops, which may produce unexpected results. If a [Tween]'s "
+"lifetime depends on some node, always use [method bind_node]."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -54119,10 +54297,10 @@ msgstr ""
 #: doc/classes/SceneTreeTween.xml
 msgid ""
 "Creates and appends an [IntervalTweener]. This method can be used to create "
-"delays in the tween animation, as an alternative for using the delay in "
-"other [Tweener]s or when there's no animation (in which case the "
-"[SceneTreeTween] acts as a timer). [code]time[/code] is the length of the "
-"interval, in seconds.\n"
+"delays in the tween animation, as an alternative to using the delay in other "
+"[Tweener]s, or when there's no animation (in which case the [SceneTreeTween] "
+"acts as a timer). [code]time[/code] is the length of the interval, in "
+"seconds.\n"
 "Example: creating an interval in code execution.\n"
 "[codeblock]\n"
 "# ... some code\n"
@@ -54176,8 +54354,8 @@ msgid ""
 "Creates and appends a [PropertyTweener]. This method tweens a "
 "[code]property[/code] of an [code]object[/code] between an initial value and "
 "[code]final_val[/code] in a span of time equal to [code]duration[/code], in "
-"seconds. The initial value by default is a value at the time the tweening of "
-"the [PropertyTweener] start. For example:\n"
+"seconds. The initial value by default is the property's value at the time "
+"the tweening of the [PropertyTweener] starts. For example:\n"
 "[codeblock]\n"
 "var tween = create_tween()\n"
 "tween.tween_property($Sprite, \"position\", Vector2(100, 200), 1)\n"
@@ -54208,16 +54386,15 @@ msgid ""
 "Emitted when the [SceneTreeTween] has finished all tweening. Never emitted "
 "when the [SceneTreeTween] is set to infinite looping (see [method "
 "set_loops]).\n"
-"[b]Note:[/b] The [SceneTreeTween] is removed (invalidated) after this signal "
-"is emitted, but it doesn't happen immediately, but on the next processing "
-"frame. Calling [method stop] inside the signal callback will preserve the "
-"[SceneTreeTween]."
+"[b]Note:[/b] The [SceneTreeTween] is removed (invalidated) in the next "
+"processing frame after this signal is emitted. Calling [method stop] inside "
+"the signal callback will prevent the [SceneTreeTween] from being removed."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
 msgid ""
 "Emitted when a full loop is complete (see [method set_loops]), providing the "
-"loop index. This signal is not emitted after final loop, use [signal "
+"loop index. This signal is not emitted after the final loop, use [signal "
 "finished] instead for this case."
 msgstr ""
 
@@ -54225,7 +54402,7 @@ msgstr ""
 msgid ""
 "Emitted when one step of the [SceneTreeTween] is complete, providing the "
 "step index. One step is either a single [Tweener] or a group of [Tweener]s "
-"running parallelly."
+"running in parallel."
 msgstr ""
 
 #: doc/classes/SceneTreeTween.xml
@@ -58193,11 +58370,11 @@ msgstr ""
 msgid ""
 "Returns [code]true[/code] if this string contains a valid integer.\n"
 "[codeblock]\n"
-"print(\"7\".is_valid_int()) # Prints \"True\"\n"
-"print(\"14.6\".is_valid_int()) # Prints \"False\"\n"
-"print(\"L\".is_valid_int()) # Prints \"False\"\n"
-"print(\"+3\".is_valid_int()) # Prints \"True\"\n"
-"print(\"-12\".is_valid_int()) # Prints \"True\"\n"
+"print(\"7\".is_valid_integer()) # Prints \"True\"\n"
+"print(\"14.6\".is_valid_integer()) # Prints \"False\"\n"
+"print(\"L\".is_valid_integer()) # Prints \"False\"\n"
+"print(\"+3\".is_valid_integer()) # Prints \"True\"\n"
+"print(\"-12\".is_valid_integer()) # Prints \"True\"\n"
 "[/codeblock]"
 msgstr ""
 
@@ -63068,7 +63245,18 @@ msgid ""
 "To iterate over all the [TreeItem] objects in a [Tree] object, use [method "
 "TreeItem.get_next] and [method TreeItem.get_children] after getting the root "
 "through [method get_root]. You can use [method Object.free] on a [TreeItem] "
-"to remove it from the [Tree]."
+"to remove it from the [Tree].\n"
+"[b]Incremental search:[/b] Like [ItemList] and [PopupMenu], [Tree] supports "
+"searching within the list while the control is focused. Press a key that "
+"matches the first letter of an item's name to select the first item starting "
+"with the given letter. After that point, there are two ways to perform "
+"incremental search: 1) Press the same key again before the timeout duration "
+"to select the next item starting with the same letter. 2) Press letter keys "
+"that match the rest of the word before the timeout duration to match to "
+"select the item in question directly. Both of these actions will be reset to "
+"the beginning of the list if the timeout duration has passed since the last "
+"keystroke was registered. You can adjust the timeout duration by changing "
+"[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
 msgstr ""
 
 #: doc/classes/Tree.xml