Keep only production ready translations, move the WIP ones to godot-editor-l10n

- Remove WIP translation templates, moved to godot-editor-l10n which
  will be the source and target for Weblate contributions.
  * https://github.com/godotengine/godot-editor-l10n
- Re-add translations with a high completion ratio, stripped of the
  untranslated and fuzzy strings, and of the location and translator
  comments, to keep the size lower.
  * Threshold editor interface: 20% complete.
  * Threshold properties: 20% complete.
  * Threshold classes: 10% complete.

1 files changed, 0 insertions, 80397 deletions

diff --git a/doc/translations/de.po b/doc/translations/de.po
deleted file mode 100644
index 14d2291f8c..0000000000
--- a/doc/translations/de.po
+++ /dev/null
@@ -1,80397 +0,0 @@
-# German translation of the Godot Engine class reference.
-# Copyright (c) 2007-2022 Juan Linietsky, Ariel Manzur.
-# Copyright (c) 2014-2022 Godot Engine contributors (cf. AUTHORS.md).
-# This file is distributed under the same license as the Godot source code.
-#
-# Jaigskim <filzstift112@gmail.com>, 2020.
-# So Wieso <sowieso@dukun.de>, 2020, 2022.
-# artism90 <artism90@googlemail.com>, 2020.
-# HugeGameArt <hugegameartgd@gmail.com>, 2020.
-# Günther Bohn <ciscouser@gmx.de>, 2020, 2021.
-# Rémi Verschelde <akien@godotengine.org>, 2020.
-# Julian Pritzi <julian.pritzi@gmail.com>, 2020.
-# Markus Lechner <marcus.lechner@gmail.com>, 2020.
-# lmarz <leon.marz@kabelmail.de>, 2020.
-# Helmut Hirtes <helmut.h@gmx.de>, 2020.
-# Michal695 <michalek.jedrzejak@gmail.com>, 2020.
-# Dusk <marvin.a.fuerus@gmail.com>, 2020, 2021.
-# Aaron H <aago2001@web.de>, 2020.
-# Gehteuchimmer Nochnichtsan <31415card@web.de>, 2020, 2021.
-# GrauBlitZ <steffen-kremer@outlook.com>, 2020.
-# Geometror <hendrik.brucker@mail.de>, 2020, 2021.
-# Phil Ipp <philk.7438@gmail.com>, 2020.
-# Bjarne Hiller <bjarne.hiller@gmail.com>, 2020.
-# Martin <martinreininger@gmx.net>, 2021.
-# The Origin <fifeimcity@gmail.com>, 2021.
-# Daniel Plaster <danimineiromc@googlemail.com>, 2021.
-# RoniPerson <online141@gmx.de>, 2021.
-# Badewu <neumanntobias3@t-online.de>, 2021.
-# Linux User <no-ads@mail.de>, 2021.
-# Independent-Eye <michalek.jedrzejak@gmail.com>, 2021.
-# Leon Wehrwein <wel@outlook.de>, 2021.
-# Ron Eric Hackländer <mail@roneric.net>, 2021.
-# Stephan Kerbl <stephankerbl@gmail.com>, 2021.
-# jmih03 <joerni@mail.de>, 2021.
-# spoadr <spoadr@gmx.ch>, 2021.
-# Tim <tim14speckenwirth@gmail.com>, 2021.
-# user <online141@gmx.de>, 2021.
-# Jummit <jummit@web.de>, 2021, 2022.
-# Bastian <bastian.ike@gmail.com>, 2021.
-# KuhnChris <kuhnchris@kuhnchris.eu>, 2021.
-# Rémi Verschelde <remi@godotengine.org>, 2021.
-# Antonio Noack <corperateraider@gmail.com>, 2022.
-# ‎ <artism90@googlemail.com>, 2022.
-# Coxcopi70f00b67b61542fe <hn_vogel@gmx.net>, 2022.
-# Leon Marz <main@lmarz.org>, 2022.
-# Robin <robin.janzen@gmx.net>, 2022.
-# Andreas <self@andreasbresser.de>, 2022.
-# Christian Packenius <christian@packenius.com>, 2022.
-# Hannes Petersen <01zustrom.baklava@icloud.com>, 2022.
-# Hans Peter <figefi6308@runqx.com>, 2022.
-# Tim <sakul8826@gmail.com>, 2022.
-# Anonynonymouse <tom.spaine60388@gmail.com>, 2022.
-# Felix Bitsch <felix.a.bitsch@gmail.com>, 2022.
-# Coxcopi <master.vogel2015@gmail.com>, 2022.
-# Harusakii <spieleok@gmail.com>, 2022.
-# GadMas <c.vavra@web.de>, 2022.
-# JodliDev <jodlidev@gmail.com>, 2022.
-msgid ""
-msgstr ""
-"Project-Id-Version: Godot Engine class reference\n"
-"Report-Msgid-Bugs-To: https://github.com/godotengine/godot\n"
-"PO-Revision-Date: 2022-11-10 23:27+0000\n"
-"Last-Translator: JodliDev <jodlidev@gmail.com>\n"
-"Language-Team: German <https://hosted.weblate.org/projects/godot-engine/"
-"godot-class-reference/de/>\n"
-"Language: de\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8-bit\n"
-"Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.15-dev\n"
-
-#: doc/tools/make_rst.py
-msgid "Description"
-msgstr "Beschreibung"
-
-#: doc/tools/make_rst.py
-msgid "Tutorials"
-msgstr "Anleitungen"
-
-#: doc/tools/make_rst.py
-msgid "Properties"
-msgstr "Eigenschaften"
-
-#: doc/tools/make_rst.py
-msgid "Methods"
-msgstr "Methoden"
-
-#: doc/tools/make_rst.py
-msgid "Theme Properties"
-msgstr "Theme-Eigenschaften"
-
-#: doc/tools/make_rst.py
-msgid "Signals"
-msgstr "Signale"
-
-#: doc/tools/make_rst.py
-msgid "Enumerations"
-msgstr "Aufzählungen"
-
-#: doc/tools/make_rst.py
-msgid "Constants"
-msgstr "Konstanten"
-
-#: doc/tools/make_rst.py
-msgid "Property Descriptions"
-msgstr "Eigenschaften-Beschreibung"
-
-#: doc/tools/make_rst.py
-msgid "Method Descriptions"
-msgstr "Methoden-Beschreibung"
-
-#: doc/tools/make_rst.py
-msgid "Theme Property Descriptions"
-msgstr "Theme-Eigenschaften Beschreibungen"
-
-#: doc/tools/make_rst.py
-msgid "Inherits:"
-msgstr "Erbt von:"
-
-#: doc/tools/make_rst.py
-msgid "Inherited By:"
-msgstr "Geerbt von:"
-
-#: doc/tools/make_rst.py
-msgid "(overrides %s)"
-msgstr "(überschreibt %s)"
-
-#: doc/tools/make_rst.py
-msgid "Default"
-msgstr "Standard"
-
-#: doc/tools/make_rst.py
-msgid "Setter"
-msgstr "Wert-Zuweiser"
-
-#: doc/tools/make_rst.py
-msgid "value"
-msgstr "Wert"
-
-#: doc/tools/make_rst.py
-msgid "Getter"
-msgstr "Wert-Abrufer"
-
-#: doc/tools/make_rst.py
-msgid ""
-"This method should typically be overridden by the user to have any effect."
-msgstr "Diese Methode sollte bei Gebrauch überschrieben werden."
-
-#: doc/tools/make_rst.py
-msgid ""
-"This method has no side effects. It doesn't modify any of the instance's "
-"member variables."
-msgstr ""
-"Diese Methode löst keine Seiteneffekte aus. Variablen der betroffenen "
-"Instanz bleiben unverändert."
-
-#: doc/tools/make_rst.py
-msgid ""
-"This method accepts any number of arguments after the ones described here."
-msgstr ""
-"Diese Methode nimmt eine beliebige Anzahl an Argumenten nach Ende der hier "
-"beschriebenen Argumente auf."
-
-#: doc/tools/make_rst.py
-msgid "This method is used to construct a type."
-msgstr "Diese Methode wird dazu verwendet, einen Typen zu konstruieren."
-
-#: doc/tools/make_rst.py
-msgid ""
-"This method doesn't need an instance to be called, so it can be called "
-"directly using the class name."
-msgstr ""
-"Diese Methode benötigt keine Instanz zum Aufruf, sie kann direkt über den "
-"Klassennamen aufgerufen werden."
-
-#: doc/tools/make_rst.py
-msgid ""
-"This method describes a valid operator to use with this type as left-hand "
-"operand."
-msgstr ""
-"Diese Methode beschreibt einen gültigen Operator für diesen Typ zur "
-"Verwendung als linksseitigen Operanden."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid "Built-in GDScript functions."
-msgstr "Native GDScript-Funktionen."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"List of core built-in GDScript functions. Math functions and other "
-"utilities. Everything else is provided by objects. (Keywords: builtin, built "
-"in, global functions.)"
-msgstr ""
-"Auflistung der grundlegenden nativen GDScript-Funktionen. Hauptsächlich "
-"mathematische Funktionen und Hilfsfunktionen. Alle anderen grundlegenden "
-"Funktionen werden über Objekte bereitgestellt. (Schlüsselwörter: builtin, "
-"built in, nativ, grundlegend, globale Funktionen.)"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a color constructed from integer red, green, blue, and alpha "
-"channels. Each channel should have 8 bits of information ranging from 0 to "
-"255.\n"
-"[code]r8[/code] red channel\n"
-"[code]g8[/code] green channel\n"
-"[code]b8[/code] blue channel\n"
-"[code]a8[/code] alpha channel\n"
-"[codeblock]\n"
-"red = Color8(255, 0, 0)\n"
-"[/codeblock]"
-msgstr ""
-"Gibt eine Farbe zurück die aus den Integer-Werten der Kanäle Rot, Grün, "
-"Blau, und Alpha erzeugt wird. Jeder Kanal sollte einen 8-Bit-Wert im "
-"Zahlenbereich von 0 bis 255 enthalten.\n"
-"[code]r8[/code] roter Kanal\n"
-"[code]g8[/code] grüner Kanal\n"
-"[code]b8[/code] blauer Kanal\n"
-"[code]a8[/code] Alpha-Kanal\n"
-"[codeblock]\n"
-"red = Color8(255, 0, 0)\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a color according to the standardized [code]name[/code] with "
-"[code]alpha[/code] ranging from 0 to 1.\n"
-"[codeblock]\n"
-"red = ColorN(\"red\", 1)\n"
-"[/codeblock]\n"
-"Supported color names are the same as the constants defined in [Color]."
-msgstr ""
-"Gibt eine Farbe gemäß dem standardisierten [code]name[/code] zurück, wobei "
-"[code]alpha[/code] im Bereich von 0 bis 1 liegt.\n"
-"[codeblock]\n"
-"rot = ColorN(\"red\", 1)\n"
-"[/codeblock]\n"
-"Die unterstützten Farbnamen sind die gleichen wie die in [Color] definierten "
-"Konstanten."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the absolute value of parameter [code]s[/code] (i.e. positive "
-"value).\n"
-"[codeblock]\n"
-"a = abs(-1) # a is 1\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den absoluten Wert des Parameters [code]s[/code] zurück (positiver "
-"Wert).\n"
-"[codeblock]\n"
-"a = abs(-1) # a ist 1\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the arc cosine of [code]s[/code] in radians. Use to get the angle of "
-"cosine [code]s[/code]. [code]s[/code] must be between [code]-1.0[/code] and "
-"[code]1.0[/code] (inclusive), otherwise, [method acos] will return [constant "
-"NAN].\n"
-"[codeblock]\n"
-"# c is 0.523599 or 30 degrees if converted with rad2deg(s)\n"
-"c = acos(0.866025)\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Arkuskosinus von [code]s[/code] in Bogenmaß zurück. Verwenden Sie "
-"diese Funktion, um den Winkel des Kosinus [code]s[/code] zu erhalten. "
-"[code]s[/code] muss zwischen [code]-1.0[/code] und [code]1.0[/code] "
-"(inklusiv) liegen, sonst wird [method acos] [constant NAN] zurückgeben.\n"
-"[codeblock]\n"
-"# c ist 0,523599 oder 30 Grad, wenn mit rad2deg(s) umgerechnet\n"
-"c = acos(0,866025)\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the arc sine of [code]s[/code] in radians. Use to get the angle of "
-"sine [code]s[/code]. [code]s[/code] must be between [code]-1.0[/code] and "
-"[code]1.0[/code] (inclusive), otherwise, [method asin] will return [constant "
-"NAN].\n"
-"[codeblock]\n"
-"# s is 0.523599 or 30 degrees if converted with rad2deg(s)\n"
-"s = asin(0.5)\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Arkussinus von [code]s[/code] in Bogenmaß zurück. Verwenden Sie "
-"diese Funktion, um den Sinuswinkel [code]s[/code] zu erhalten. [code]s[/"
-"code] muss zwischen [code]-1.0[/code] und [code]1.0[/code] (inklusiv) "
-"liegen, sonst wird [method asin] [constant NAN] zurückgeben.\n"
-"[codeblock]\n"
-"# s ist 0,523599 oder 30 Grad, wenn mit rad2deg(s) umgerechnet\n"
-"s = asin(0,5)\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Asserts that the [code]condition[/code] is [code]true[/code]. If the "
-"[code]condition[/code] is [code]false[/code], an error is generated. When "
-"running from the editor, the running project will also be paused until you "
-"resume it. This can be used as a stronger form of [method push_error] for "
-"reporting errors to project developers or add-on users.\n"
-"[b]Note:[/b] For performance reasons, the code inside [method assert] is "
-"only executed in debug builds or when running the project from the editor. "
-"Don't include code that has side effects in an [method assert] call. "
-"Otherwise, the project will behave differently when exported in release "
-"mode.\n"
-"The optional [code]message[/code] argument, if given, is shown in addition "
-"to the generic \"Assertion failed\" message. You can use this to provide "
-"additional details about why the assertion failed.\n"
-"[codeblock]\n"
-"# Imagine we always want speed to be between 0 and 20.\n"
-"var speed = -10\n"
-"assert(speed < 20) # True, the program will continue\n"
-"assert(speed >= 0) # False, the program will stop\n"
-"assert(speed >= 0 and speed < 20) # You can also combine the two conditional "
-"statements in one check\n"
-"assert(speed < 20, \"speed = %f, but the speed limit is 20\" % speed) # Show "
-"a message with clarifying details\n"
-"[/codeblock]"
-msgstr ""
-"Stellt sicher, dass [code]condition[/code] [code]true[/code] ist. Wenn "
-"[code]condition[/code] [code]false[/code] ist wird ein Fehler erzeugt. Wenn "
-"das Spiel vom Editor aus gestartet wurde wird es außerdem pausiert. Zum "
-"Fortfahren muss es vom Editor aus fortgesetzt werden.\n"
-"[b]Hinweis:[/b] Der Code innerhalb von [method assert] wird nur in Debug-"
-"Builds oder beim Ausführen des Spiels vom Editor ausgeführt. Desswegen "
-"sollte kein Code mit Nebeneffekten (z.B.: ändern von Variablen) innerhalb "
-"der Argumente von [method assert] genutzt werden. Sonst wird sich das Spiel "
-"in exportierten Versionen anders verhalten als im Editor.\n"
-"Das optionale Argument [code]message[/code] wird, zusätzlich zu der "
-"allgemeinen Fehlermeldung angezeigt. Das kann verwendet werden um genauere "
-"Informationen zum Grund des Fehlers zu geben.\n"
-"[codeblock]\n"
-"# Angenommen, wir wollen immer eine Geschwindigkeit zwischen 0 und 20\n"
-"var geschwindigkeit = -10\n"
-"assert(geschwindigkeit < 20) # Wahr, das Programm wird fortgesetzt\n"
-"assert(geschwindigkeit >= 0) # Falsch, das Programm wird gestoppt\n"
-"assert(geschwindigkeit >= 0 and geschwindigkeit < 20) # Zwei Aussagen können "
-"in einer Prüfung zusammengefasst werden\n"
-"assert(geschwindigkeit < 20, \"Geschwindigkeit = %f, aber die "
-"Geschwindigkeitsbegrenzung beträgt 20\" % geschwindigkeit) # Zeigt eine "
-"Nachricht mit klärenden Details\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the arc tangent of [code]s[/code] in radians. Use it to get the "
-"angle from an angle's tangent in trigonometry: [code]atan(tan(angle)) == "
-"angle[/code].\n"
-"The method cannot know in which quadrant the angle should fall. See [method "
-"atan2] if you have both [code]y[/code] and [code]x[/code].\n"
-"[codeblock]\n"
-"a = atan(0.5) # a is 0.463648\n"
-"[/codeblock]"
-msgstr ""
-"Gibt die Bogentangente von [code]s[/code] in Bogenmaßen zurück. Verwende es, "
-"um den Winkel aus der Tangente eines Winkels in der Trigonometrie zu "
-"erhalten: [code]atan(tan(angle)) == angle[/code].\n"
-"Die Methode kann nicht wissen, in welchen Quadranten der Winkel fallen soll. "
-"Siehe [method atan2], wenn sowohl [code]y[/code] als auch [code]x[/code] "
-"vorhanden ist.\n"
-"[codeblock]\n"
-"a = atan(0.5) # a ist 0.463648\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the arc tangent of [code]y/x[/code] in radians. Use to get the angle "
-"of tangent [code]y/x[/code]. To compute the value, the method takes into "
-"account the sign of both arguments in order to determine the quadrant.\n"
-"Important note: The Y coordinate comes first, by convention.\n"
-"[codeblock]\n"
-"a = atan2(0, -1) # a is 3.141593\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Arkustangens von [code]y/x[/code] im Bogenmaß zurück. Verwenden Sie "
-"diese Funktion, um den Winkel der Tangente [code]y/x[/code] zu erhalten. Um "
-"den Wert zu berechnen, berücksichtigt die Methode das Vorzeichen beider "
-"Argumente, um den Quadranten zu bestimmen.\n"
-"Wichtiger Hinweis: Der Y Wert kommt zuerst, gemäß Konvention.\n"
-"[codeblock]\n"
-"a = atan2(0, -1) # a ist 3,141593\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Decodes a byte array back to a value. When [code]allow_objects[/code] is "
-"[code]true[/code] decoding objects is allowed.\n"
-"[b]WARNING:[/b] Deserialized object can contain code which gets executed. Do "
-"not use this option if the serialized object comes from untrusted sources to "
-"avoid potential security threats (remote code execution)."
-msgstr ""
-"Dekodiert ein Byte-Array zurück zu einem Wert. Wenn [code]allow_objects[/"
-"code] gleich [code]wahr[/code], ist die Dekodierung von Objekten erlaubt.\n"
-"[b]WARNUNG:[/b] Deserialisierte Objekte können Code enthalten, der "
-"ausgeführt wird. Verwenden Sie diese Option nicht, wenn das serialisierte "
-"Objekt aus nicht vertrauenswürdigen Quellen stammt, um potenzielle "
-"Sicherheitsbedrohungen zu vermeiden (entfernte Codeausführung)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Converts a 2D point expressed in the cartesian coordinate system (X and Y "
-"axis) to the polar coordinate system (a distance from the origin and an "
-"angle)."
-msgstr ""
-"Konvertiert einen 2D Punkt in einem kartesischen Koordinatensystem (X- und Y-"
-"Achse) in ein Polarkoordinatensystem (die Distanz vom Ursprung und der "
-"Winkel)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Rounds [code]s[/code] upward (towards positive infinity), returning the "
-"smallest whole number that is not less than [code]s[/code].\n"
-"[codeblock]\n"
-"a = ceil(1.45)  # a is 2.0\n"
-"a = ceil(1.001) # a is 2.0\n"
-"[/codeblock]\n"
-"See also [method floor], [method round], [method stepify], and [int]."
-msgstr ""
-"Rundet [code]s[/code] nach oben auf und gibt die kleinste ganze Zahl zurück, "
-"die nicht geringer ist als [code]s[/code].\n"
-"[codeblock]\n"
-"a = ceil(1.45)  # a ist 2.0\n"
-"a = ceil(1.001) # a ist 2.0\n"
-"[/codeblock]\n"
-"Siehe auch [method floor], [method round], [method stepify] und [int]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a character as a String of the given Unicode code point (which is "
-"compatible with ASCII code).\n"
-"[codeblock]\n"
-"a = char(65)      # a is \"A\"\n"
-"a = char(65 + 32) # a is \"a\"\n"
-"a = char(8364)    # a is \"€\"\n"
-"[/codeblock]\n"
-"This is the inverse of [method ord]."
-msgstr ""
-"Gibt ein Zeichen als Zeichenkette mit dem angegebenen Unicode-Codepunkt (der "
-"mit dem ASCII-Code kompatibel ist) zurück.\n"
-"[codeblock]\n"
-"a = char(65)      # a ist \"A\"\n"
-"a = char(65 + 32) # a ist \"a\"\n"
-"a = char(8364)    # a ist \"€\"\n"
-"[/codeblock]\n"
-"Dies ist die Umkehrung von [method ord]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Clamps [code]value[/code] and returns a value not less than [code]min[/code] "
-"and not more than [code]max[/code].\n"
-"[codeblock]\n"
-"a = clamp(1000, 1, 20) # a is 20\n"
-"a = clamp(-10, 1, 20)  # a is 1\n"
-"a = clamp(15, 1, 20)   # a is 15\n"
-"[/codeblock]"
-msgstr ""
-"Klammert [code]Wert[/code] und gibt einen Wert von nicht weniger als "
-"[code]min[/code] und nicht mehr als [code]max[/code] zurück.\n"
-"[codeblock]\n"
-"a = clamp(1000, 1, 20) # a ist 20\n"
-"a = clamp(-10, 1, 20)  # a ist 1\n"
-"a = clamp(15, 1, 20)   # a ist 15\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts from a type to another in the best way possible. The [code]type[/"
-"code] parameter uses the [enum Variant.Type] values.\n"
-"[codeblock]\n"
-"a = Vector2(1, 0)\n"
-"# Prints 1\n"
-"print(a.length())\n"
-"a = convert(a, TYPE_STRING)\n"
-"# Prints 6 as \"(1, 0)\" is 6 characters\n"
-"print(a.length())\n"
-"[/codeblock]"
-msgstr ""
-"Konvertiert bestmöglich von einem Typ in einen anderen. Der Parameter [code] "
-"Typ [/code] verwendet die Werte [enum Variant.Type].\n"
-"[codeblock]\n"
-"a = Vector2(1, 0)\n"
-"# Prints 1\n"
-"print(a.length())\n"
-"a = convert(a, TYPE_STRING)\n"
-"# Prints 6 as \"(1, 0)\" is 6 characters\n"
-"print(a.length())\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the cosine of angle [code]s[/code] in radians.\n"
-"[codeblock]\n"
-"a = cos(TAU) # a is 1.0\n"
-"a = cos(PI)  # a is -1.0\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Cosinus des Winkels [code]s[/code] in Radiant zurück.\n"
-"[codeblock]\n"
-"a = cos(TAU) # a ist 1.0\n"
-"a = cos(PI) # a ist -1.0\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the hyperbolic cosine of [code]s[/code] in radians.\n"
-"[codeblock]\n"
-"print(cosh(1)) # Prints 1.543081\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den hyperbolischen Kosinus von [code]s[/code] in Bogenmaß zurück.\n"
-"[codeblock]\n"
-"print(cosh(1)) # Gibt 1.543081 aus\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid "Converts from decibels to linear energy (audio)."
-msgstr "Konvertiert von Dezibel in lineare Energie (Audio)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid "Deprecated alias for [method step_decimals]."
-msgstr "Veralteter Alias für [method step_decimals]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"[b]Note:[/b] [code]dectime[/code] has been deprecated and will be removed in "
-"Godot 4.0, please use [method move_toward] instead.\n"
-"Returns the result of [code]value[/code] decreased by [code]step[/code] * "
-"[code]amount[/code].\n"
-"[codeblock]\n"
-"a = dectime(60, 10, 0.1)) # a is 59.0\n"
-"[/codeblock]"
-msgstr ""
-"[b]Hinweis:[/b] [code]dectime[/code] ist veraltet und wird in Godot 4.0 "
-"entfernt. [method move_toward] kann stattdessen verwendet werden.\n"
-"Gibt das Ergebnis von [code]value[/code] vermindert um [code]step[/code] * "
-"[code]amount[/code] zurück.\n"
-"[codeblock]\n"
-"a = dectime(60, 10, 0.1)) # a ist 59.0\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Compares two values by checking their actual contents, recursing into any "
-"[Array] or [Dictionary] up to its deepest level.\n"
-"This compares to [code]==[/code] in a number of ways:\n"
-"- For [code]null[/code], [code]int[/code], [code]float[/code], [code]String[/"
-"code], [code]Object[/code] and [code]RID[/code] both [code]deep_equal[/code] "
-"and [code]==[/code] work the same.\n"
-"- For [code]Dictionary[/code], [code]==[/code] considers equality if, and "
-"only if, both variables point to the very same [code]Dictionary[/code], with "
-"no recursion or awareness of the contents at all.\n"
-"- For [code]Array[/code], [code]==[/code] considers equality if, and only "
-"if, each item in the first [code]Array[/code] is equal to its counterpart in "
-"the second [code]Array[/code], as told by [code]==[/code] itself. That "
-"implies that [code]==[/code] recurses into [code]Array[/code], but not into "
-"[code]Dictionary[/code].\n"
-"In short, whenever a [code]Dictionary[/code] is potentially involved, if you "
-"want a true content-aware comparison, you have to use [code]deep_equal[/"
-"code]."
-msgstr ""
-"Vergleicht zwei Werte, indem es deren tatsächlichen Inhalt überprüft. Die "
-"Methode geht dabei in jedes `Array` oder `Dictionary` bis zum aller tiefsten "
-"Level.\n"
-"Was ist der Unterschied zu [code]==[/code]?\n"
-"- Für die Typen [code]null[/code], [code]int[/code], [code]float[/code], "
-"[code]String[/code], [code]Object[/code] und [code]RID[/code] sind "
-"[code]deep_equal[/code] und [code]==[/code] identisch.\n"
-"- Für [code]Dictionary[/code]s, prüft [code]==[/code] nur, ob es dasselbe "
-"Objekt ist .\n"
-"- Für [code]Array[/code]s, [code]==[/code] werden die Arrays elementweise "
-"mit [code]==[/code] verglichen. Der Elemente-Vergleich ist also wieder "
-"einfach, nicht tief.\n"
-"Zusammengefasst, immer wenn ein [code]Dictionary[/code] potentiell "
-"involviert ist, und du einen wahren Inhaltsvergleich brauchst, musst du "
-"[code]deep_equal[/code] verwenden."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts an angle expressed in degrees to radians.\n"
-"[codeblock]\n"
-"r = deg2rad(180) # r is 3.141593\n"
-"[/codeblock]"
-msgstr ""
-"Rechnet einen im Gradmaß vorliegenden Winkel ins Bogenmaß um und gibt das "
-"Ergebnis zurück.\n"
-"[codeblock]\n"
-"r = deg2rad(180) # r ist 3.141593\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts a dictionary (previously created with [method inst2dict]) back to "
-"an instance. Useful for deserializing."
-msgstr ""
-"Konvertiert ein Dictionary (das zuvor mit [method inst2dict] erstellt wurde) "
-"zurück in eine Instanz. Nützlich für die Deserialisierung."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns an \"eased\" value of [code]x[/code] based on an easing function "
-"defined with [code]curve[/code]. This easing function is based on an "
-"exponent. The [code]curve[/code] can be any floating-point number, with "
-"specific values leading to the following behaviors:\n"
-"[codeblock]\n"
-"- Lower than -1.0 (exclusive): Ease in-out\n"
-"- 1.0: Linear\n"
-"- Between -1.0 and 0.0 (exclusive): Ease out-in\n"
-"- 0.0: Constant\n"
-"- Between 0.0 to 1.0 (exclusive): Ease out\n"
-"- 1.0: Linear\n"
-"- Greater than 1.0 (exclusive): Ease in\n"
-"[/codeblock]\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
-"ease_cheatsheet.png]ease() curve values cheatsheet[/url]\n"
-"See also [method smoothstep]. If you need to perform more advanced "
-"transitions, use [Tween] or [AnimationPlayer]."
-msgstr ""
-"Gibt einen interpolierten Wert von [code]x[/code] basierend auf einer "
-"Übergangsfunktion die durch [code]curve[/code] definiert wird. Diese "
-"Übergangsfunktion basiert auf einem Exponenten. Die [code]curve[/code] kann "
-"eine beliebige Fließkommazahl sein, wobei bestimmte Werte zu folgendem "
-"Verhalten führen:\n"
-"[codeblock]\n"
-"- Weniger als -1.0 (exklusiv): Ease in-out\n"
-"- 1.0: Linear\n"
-"- Zwischen -1.0 und 0.0 (exklusiv): Ease out-in\n"
-"- 0.0: Konstant\n"
-"- Zwischen 0.0 und 1.0 (exklusiv): Ease in\n"
-"- 1.0: Linear\n"
-"- Mehr als 1.0 (exklusive): Beschleunige out\n"
-"[/codeblock]\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.4/img/"
-"ease_cheatsheet.png]ease() curve values cheatsheet[/url]\n"
-"Siehe auch [method smoothstep]. Wenn du noch komplexere Übergänge erstellen "
-"möchtest, benutze [Tween] oder [AnimationPlayer]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"The natural exponential function. It raises the mathematical constant [b]e[/"
-"b] to the power of [code]s[/code] and returns it.\n"
-"[b]e[/b] has an approximate value of 2.71828, and can be obtained with "
-"[code]exp(1)[/code].\n"
-"For exponents to other bases use the method [method pow].\n"
-"[codeblock]\n"
-"a = exp(2) # Approximately 7.39\n"
-"[/codeblock]"
-msgstr ""
-"Die natürliche Exponentialfunktion. Sie hebt die mathematische Konstante "
-"[b]e[/b] in die Potenz von [code]s[/code] und gibt sie zurück.\n"
-"[b]e[/b] hat einen ungefähren Wert von 2,71828 und kann mit [code]exp(1)[/"
-"code] erhalten werden.\n"
-"Für Exponenten zu anderen Basen verwenden Sie die Methode [method pow].\n"
-"[codeblock]\n"
-"a = exp(2) # Approximately 7.39\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Rounds [code]s[/code] downward (towards negative infinity), returning the "
-"largest whole number that is not more than [code]s[/code].\n"
-"[codeblock]\n"
-"a = floor(2.45)  # a is 2.0\n"
-"a = floor(2.99)  # a is 2.0\n"
-"a = floor(-2.99) # a is -3.0\n"
-"[/codeblock]\n"
-"See also [method ceil], [method round], [method stepify], and [int].\n"
-"[b]Note:[/b] This method returns a float. If you need an integer and "
-"[code]s[/code] is a non-negative number, you can use [code]int(s)[/code] "
-"directly."
-msgstr ""
-"Rundet [code]s[/code] auf die nächste kleinere ganze Zahl nach unten (in "
-"Richtung negativ unendlich) und gibt die größte ganze Zahl zurück, die nicht "
-"größer als [code]s[/code] ist.\n"
-"[codeblock]\n"
-"a = floor(2.45)  # a ist 2.0\n"
-"a = floor(2.99)  # a ist 2.0\n"
-"a = floor(-2.99) # a ist -3.0\n"
-"[/codeblock]\n"
-"Siehe auch [method ceil], [method round], [method stepify], und [int].\n"
-"[b]Hinweis:[/b] Diese Methode gibt eine Fließkommazahl zurück. Wenn Sie eine "
-"Ganzzahl benötigen und [code]s[/code] nicht negativ ist, können Sie "
-"[code]int(s)[/code] direkt verwenden."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the floating-point remainder of [code]a/b[/code], keeping the sign "
-"of [code]a[/code].\n"
-"[codeblock]\n"
-"r = fmod(7, 5.5) # r is 1.5\n"
-"[/codeblock]\n"
-"For the integer remainder operation, use the % operator."
-msgstr ""
-"Gibt den Divisionsrest von [code]a/b[/code] mit Nachkommastellen zurück und "
-"behält das Vorzeichen von [code]a[/code].\n"
-"[codeblock]\n"
-"var rest = fmod(7, 5.5) # rest ist 1.5\n"
-"[/codeblock]\n"
-"Für den Integer-Divisionsrest, den % Operator benutzen."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the floating-point modulus of [code]a/b[/code] that wraps equally in "
-"positive and negative.\n"
-"[codeblock]\n"
-"for i in 7:\n"
-"    var x = 0.5 * i - 1.5\n"
-"    print(\"%4.1f %4.1f %4.1f\" % [x, fmod(x, 1.5), fposmod(x, 1.5)])\n"
-"[/codeblock]\n"
-"Produces:\n"
-"[codeblock]\n"
-"-1.5 -0.0  0.0\n"
-"-1.0 -1.0  0.5\n"
-"-0.5 -0.5  1.0\n"
-" 0.0  0.0  0.0\n"
-" 0.5  0.5  0.5\n"
-" 1.0  1.0  1.0\n"
-" 1.5  0.0  0.0\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Fließkommamodulo von [code]a/b[/code] zurück, der gleichermaßen in "
-"positiv und negativ umschlägt.\n"
-"[codeblock]\n"
-"for i in 7:\n"
-"    var x = 0.5 * i - 1.5\n"
-"    print(\"%4.1f %4.1f %4.1f\" % [x, fmod(x, 1.5), fposmod(x, 1.5)])\n"
-"[/codeblock]\n"
-"Gibt aus:\n"
-"[codeblock]\n"
-"-1.5 -0.0  0.0\n"
-"-1.0 -1.0  0.5\n"
-"-0.5 -0.5  1.0\n"
-" 0.0  0.0  0.0\n"
-" 0.5  0.5  0.5\n"
-" 1.0  1.0  1.0\n"
-" 1.5  0.0  0.0\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a reference to the specified function [code]funcname[/code] in the "
-"[code]instance[/code] node. As functions aren't first-class objects in "
-"GDscript, use [code]funcref[/code] to store a [FuncRef] in a variable and "
-"call it later.\n"
-"[codeblock]\n"
-"func foo():\n"
-"    return(\"bar\")\n"
-"\n"
-"a = funcref(self, \"foo\")\n"
-"print(a.call_func()) # Prints bar\n"
-"[/codeblock]"
-msgstr ""
-"Liefert eine Reference an die genannte Funktion [code]funcname[/code] in the "
-"[code]instance[/code] node. As functions aren't first-class objects in "
-"GDscript, use [code]funcref[/code] to store a [FuncRef] in a variable and "
-"call it later.\n"
-"[codeblock]\n"
-"func foo():\n"
-"    return(\"bar\")\n"
-"\n"
-"a = funcref(self, \"foo\")\n"
-"print(a.call_func()) # Prints bar\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Returns an array of dictionaries representing the current call stack. See "
-"also [method print_stack].\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    foo()\n"
-"\n"
-"func foo():\n"
-"    bar()\n"
-"\n"
-"func bar():\n"
-"    print(get_stack())\n"
-"[/codeblock]\n"
-"would print\n"
-"[codeblock]\n"
-"[{function:bar, line:12, source:res://script.gd}, {function:foo, line:9, "
-"source:res://script.gd}, {function:_ready, line:6, source:res://script.gd}]\n"
-"[/codeblock]\n"
-"[b]Note:[/b] [method get_stack] only works if the running instance is "
-"connected to a debugging server (i.e. an editor instance). [method "
-"get_stack] will not work in projects exported in release mode, or in "
-"projects exported in debug mode if not connected to a debugging server."
-msgstr ""
-"Gibt ein Array von Wörterbüchern zurück, das den aktuellen Aufrufstapel "
-"darstellt.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    foo()\n"
-"\n"
-"func foo():\n"
-"    bar()\n"
-"\n"
-"func bar():\n"
-"    print(get_stack())\n"
-"[/codeblock]\n"
-"würde ausgeben:\n"
-"[codeblock]\n"
-"[{function:bar, line:12, source:res://script.gd}, {function:foo, line:9, "
-"source:res://script.gd}, {function:_ready, line:6, source:res://script.gd}]\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the integer hash of the variable passed.\n"
-"[codeblock]\n"
-"print(hash(\"a\")) # Prints 177670\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den ganzahligen Hash-Wert einer Variable zurück.\n"
-"[codeblock]\n"
-"print(hash(\"a\")) # Gibt 177670 aus\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the passed instance converted to a dictionary (useful for "
-"serializing).\n"
-"[codeblock]\n"
-"var foo = \"bar\"\n"
-"func _ready():\n"
-"    var d = inst2dict(self)\n"
-"    print(d.keys())\n"
-"    print(d.values())\n"
-"[/codeblock]\n"
-"Prints out:\n"
-"[codeblock]\n"
-"[@subpath, @path, foo]\n"
-"[, res://test.gd, bar]\n"
-"[/codeblock]"
-msgstr ""
-"Gibt eine Instanz als Dictionary zurück (nützlich für die Serialisierung)\n"
-"[codeblock]\n"
-"var foo = \"bar\"\n"
-"func _ready():\n"
-"    var d = inst2dict(self)\n"
-"    print(d.keys())\n"
-"    print(d.values())\n"
-"[/codeblock]\n"
-"Gibt aus:\n"
-"[codeblock]\n"
-"[@subpath, @path, foo]\n"
-"[, res://test.gd, bar]\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the Object that corresponds to [code]instance_id[/code]. All Objects "
-"have a unique instance ID.\n"
-"[codeblock]\n"
-"var foo = \"bar\"\n"
-"func _ready():\n"
-"    var id = get_instance_id()\n"
-"    var inst = instance_from_id(id)\n"
-"    print(inst.foo) # Prints bar\n"
-"[/codeblock]"
-msgstr ""
-"Liefert das zugehörige Object zu [code]instance_id[/code]. Alle Objekte "
-"haben eine eindeutige Instanz ID.\n"
-"[codeblock]\n"
-"var foo = \"bar\"\n"
-"func _ready():\n"
-"    var id = get_instance_id()\n"
-"    var inst = instance_from_id(id)\n"
-"    print(inst.foo) # Prints bar\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns an interpolation or extrapolation factor considering the range "
-"specified in [code]from[/code] and [code]to[/code], and the interpolated "
-"value specified in [code]weight[/code]. The returned value will be between "
-"[code]0.0[/code] and [code]1.0[/code] if [code]weight[/code] is between "
-"[code]from[/code] and [code]to[/code] (inclusive). If [code]weight[/code] is "
-"located outside this range, then an extrapolation factor will be returned "
-"(return value lower than [code]0.0[/code] or greater than [code]1.0[/code]). "
-"Use [method clamp] on the result of [method inverse_lerp] if this is not "
-"desired.\n"
-"[codeblock]\n"
-"# The interpolation ratio in the `lerp()` call below is 0.75.\n"
-"var middle = lerp(20, 30, 0.75)\n"
-"# `middle` is now 27.5.\n"
-"# Now, we pretend to have forgotten the original ratio and want to get it "
-"back.\n"
-"var ratio = inverse_lerp(20, 30, 27.5)\n"
-"# `ratio` is now 0.75.\n"
-"[/codeblock]\n"
-"See also [method lerp] which performs the reverse of this operation, and "
-"[method range_lerp] to map a continuous series of values to another."
-msgstr ""
-"Gibt einen Inter- bzw. Extrapolationsfaktor unter Berücksichtigung des "
-"Zahlenraums von [code]from[/code] bis [code]to[/code], und dem "
-"interpolierten Wert in [code]weight[/code] zurück. Der Rückgabewert liegt "
-"zwischen [code]0.0[/code] und [code]1.0[/code] wenn [code]weight[/code] "
-"zwischen [code]from[/code] und [code]to[/code] (einschließlich). Liegt "
-"[code]weight[/code] außerhalb dieses Bereichs, wird ein Extrapolationsfaktor "
-"zurückgegeben (Rückgabewert kleiner als [code]0.0[/code] oder größer als "
-"[code]1.0[/code]).\n"
-"[codeblock]\n"
-"# Der Interpolationsfaktor im `lerp()`-Aufruf unten beträgt 0.75.\n"
-"var middle = lerp(20, 30, 0.75)\n"
-"# `middle` beträgt nun 27.5.\n"
-"# Angenommen, der ursprüngliche Faktor ist nun nicht mehr bekannt und soll "
-"zurück errechnet werden.\n"
-"var ratio = inverse_lerp(20, 30, 27.5)\n"
-"# `ratio` beträgt nun 0.75.\n"
-"[/codeblock]\n"
-"Siehe auch [method lerp] für die Umkehrung dieser Funktion und [method "
-"range_lerp] um Zahlenbereiche aufeinander abzubilden."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns [code]true[/code] if [code]a[/code] and [code]b[/code] are "
-"approximately equal to each other.\n"
-"Here, approximately equal means that [code]a[/code] and [code]b[/code] are "
-"within a small internal epsilon of each other, which scales with the "
-"magnitude of the numbers.\n"
-"Infinity values of the same sign are considered equal."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn [code]a[/code] und [code]b[/code] "
-"ungefähr gleich sind.\n"
-"Ungefähr gleich bedeutet hier, dass der Betrag der Differenz zwischen "
-"[code]a[/code] und [code]b[/code] kleiner als Epsilon (Bezeichnung einer "
-"beliebig kleinen Zahl größer als Null) ist, welches mit der Größe beider "
-"Zahlenwerte skaliert.\n"
-"Unendliche Zahlenwerte mit gleichem Vorzeichen werden als gleich betrachtet."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns whether [code]s[/code] is an infinity value (either positive "
-"infinity or negative infinity)."
-msgstr ""
-"Liefert als Ergebnis ob [code]s[/code] ein unendlicher Wert ist (entweder "
-"positiv unendlich oder negativ unendlich)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns whether [code]instance[/code] is a valid object (e.g. has not been "
-"deleted from memory)."
-msgstr ""
-"Liefert als Ergebnis ob [code]instance[/code] ein gültiges Objekt ist (z.B. "
-"wurde es noch nicht aus dem Speicher gelöscht)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns whether [code]s[/code] is a NaN (\"Not a Number\" or invalid) value."
-msgstr ""
-"Liefert als Ergebnis ob [code]s[/code] ein NaN (Not-A-Number = keine Nummer "
-"oder nicht gültig) ist."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns [code]true[/code] if [code]s[/code] is zero or almost zero.\n"
-"This method is faster than using [method is_equal_approx] with one value as "
-"zero."
-msgstr ""
-"Gibt [code]true[/code] wenn [code]s[/code] gleich Null oder fast Null ist.\n"
-"Diese Methode ist schneller als das Verwenden von [method is_equal_approx] "
-"mit einem Wert als Null."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns length of Variant [code]var[/code]. Length is the character count of "
-"String, element count of Array, size of Dictionary, etc.\n"
-"[b]Note:[/b] Generates a fatal error if Variant can not provide a length.\n"
-"[codeblock]\n"
-"a = [1, 2, 3, 4]\n"
-"len(a) # Returns 4\n"
-"[/codeblock]"
-msgstr ""
-"Gibt die Länge eines Variants [code]var[/code] zurück. Länge ist die "
-"Buchstabenzahl einer Zeichenkette, Elementzahl eines Arrays, Größe eines "
-"Dictionaries, etc.\n"
-"[b]Note:[/b] Erzeugt einen fatalen Fehler wenn der Variant keine Länge hat.\n"
-"[codeblock]\n"
-"a = [1, 2, 3, 4]\n"
-"len(a) # Gibt 4 zurück\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Linearly interpolates between two values by the factor defined in "
-"[code]weight[/code]. To perform interpolation, [code]weight[/code] should be "
-"between [code]0.0[/code] and [code]1.0[/code] (inclusive). However, values "
-"outside this range are allowed and can be used to perform [i]extrapolation[/"
-"i]. Use [method clamp] on the result of [method lerp] if this is not "
-"desired.\n"
-"If the [code]from[/code] and [code]to[/code] arguments are of type [int] or "
-"[float], the return value is a [float].\n"
-"If both are of the same vector type ([Vector2], [Vector3] or [Color]), the "
-"return value will be of the same type ([code]lerp[/code] then calls the "
-"vector type's [code]linear_interpolate[/code] method).\n"
-"[codeblock]\n"
-"lerp(0, 4, 0.75) # Returns 3.0\n"
-"lerp(Vector2(1, 5), Vector2(3, 2), 0.5) # Returns Vector2(2, 3.5)\n"
-"[/codeblock]\n"
-"See also [method inverse_lerp] which performs the reverse of this operation. "
-"To perform eased interpolation with [method lerp], combine it with [method "
-"ease] or [method smoothstep]. See also [method range_lerp] to map a "
-"continuous series of values to another."
-msgstr ""
-"Interpoliert linear zwischen zwei Werten mit dem in [code]weight[/code] "
-"definierten Faktor. Um eine Interpolation durchzuführen, sollte [code]weigh[/"
-"code] zwischen [code]0.0[/code] und [code]1.0[/code] (einschließlich) "
-"liegen. Werte außerhalb dieses Bereichs sind jedoch zulässig und können "
-"verwendet werden, um [i]Extrapolation[/i] durchzuführen. Falls dies nicht "
-"gewünscht ist, kann [method clamp] auf dem Ergebnis von [method lerp] "
-"angewendet werden.\n"
-"Wenn die Argumente [code]from[/code] und [code]to[/code] vom Typ [int] oder "
-"[float] sind, ist der Rückgabewert ein [float].\n"
-"Wenn beide vom gleichen Vektortyp sind ([Vector2], [Vector3] oder [Color]), "
-"ist der Rückgabewert vom gleichen Typ ([code]lerp[/code] ruft dann die "
-"Methode [code]linear_interpolate[/code] des Vektortyps auf).\n"
-"[codeblock]\n"
-"lerp(0, 4, 0.75) # Gibt 3.0 zurück\n"
-"lerp(Vector2(1, 5), Vector2(3, 2), 0.5) # Liefert Vector2(2, 3.5)\n"
-"[/codeblock]\n"
-"Siehe auch [method inverse_lerp], welche die Umkehrung dieser Operation "
-"durchführt. Um eine \"eased Interpolation\" mit [method lerp] durchzuführen, "
-"kombiniere sie mit [method ease] oder [method smoothstep]. Siehe auch "
-"[method range_lerp] um eine Serie von Werten ineinander abzubilden."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Linearly interpolates between two angles (in radians) by a normalized "
-"value.\n"
-"Similar to [method lerp], but interpolates correctly when the angles wrap "
-"around [constant @GDScript.TAU]. To perform eased interpolation with [method "
-"lerp_angle], combine it with [method ease] or [method smoothstep].\n"
-"[codeblock]\n"
-"extends Sprite\n"
-"var elapsed = 0.0\n"
-"func _process(delta):\n"
-"    var min_angle = deg2rad(0.0)\n"
-"    var max_angle = deg2rad(90.0)\n"
-"    rotation = lerp_angle(min_angle, max_angle, elapsed)\n"
-"    elapsed += delta\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This method lerps through the shortest path between [code]from[/"
-"code] and [code]to[/code]. However, when these two angles are approximately "
-"[code]PI + k * TAU[/code] apart for any integer [code]k[/code], it's not "
-"obvious which way they lerp due to floating-point precision errors. For "
-"example, [code]lerp_angle(0, PI, weight)[/code] lerps counter-clockwise, "
-"while [code]lerp_angle(0, PI + 5 * TAU, weight)[/code] lerps clockwise."
-msgstr ""
-"Interpoliert einen normalisierten Wert zwischen zwei Winkeln (in Radiant).\n"
-"Vergleichbar mit [method lerp], interpoliert aber korrekt, sobald sich der "
-"Winkel um [constant @GDScript.TAU] herum bewegt.\n"
-"[codeblock]\n"
-"extends Sprite\n"
-"var elapsed = 0.0\n"
-"func _process(delta):\n"
-"    var min_angle = deg2rad(0.0)\n"
-"    var max_angle = deg2rad(90.0)\n"
-"    rotation = lerp_angle(min_angle, max_angle, elapsed)\n"
-"    elapsed += delta\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts from linear energy to decibels (audio). This can be used to "
-"implement volume sliders that behave as expected (since volume isn't "
-"linear). Example:\n"
-"[codeblock]\n"
-"# \"Slider\" refers to a node that inherits Range such as HSlider or "
-"VSlider.\n"
-"# Its range must be configured to go from 0 to 1.\n"
-"# Change the bus name if you'd like to change the volume of a specific bus "
-"only.\n"
-"AudioServer.set_bus_volume_db(AudioServer.get_bus_index(\"Master\"), "
-"linear2db($Slider.value))\n"
-"[/codeblock]"
-msgstr ""
-"Konvertiert einen linearen Wert in das (logarithmische) Dezibel (Audio). "
-"Diese Konvertierung wird verwendet, um (lineare) Lautsärke-Regler (slider) "
-"zu realisieren. Beispiel:\n"
-"[codeblock]\n"
-"# \"Slider\" refers to a node that inherits Range such as HSlider or "
-"VSlider.\n"
-"# Its range must be configured to go from 0 to 1.\n"
-"# Change the bus name if you'd like to change the volume of a specific bus "
-"only.\n"
-"AudioServer.set_bus_volume_db(AudioServer.get_bus_index(\"Master\"), "
-"linear2db($Slider.value))\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Loads a resource from the filesystem located at [code]path[/code]. The "
-"resource is loaded on the method call (unless it's referenced already "
-"elsewhere, e.g. in another script or in the scene), which might cause slight "
-"delay, especially when loading scenes. To avoid unnecessary delays when "
-"loading something multiple times, either store the resource in a variable or "
-"use [method preload].\n"
-"[b]Note:[/b] Resource paths can be obtained by right-clicking on a resource "
-"in the FileSystem dock and choosing \"Copy Path\" or by dragging the file "
-"from the FileSystem dock into the script.\n"
-"[codeblock]\n"
-"# Load a scene called main located in the root of the project directory and "
-"cache it in a variable.\n"
-"var main = load(\"res://main.tscn\") # main will contain a PackedScene "
-"resource.\n"
-"[/codeblock]\n"
-"[b]Important:[/b] The path must be absolute, a local path will just return "
-"[code]null[/code].\n"
-"This method is a simplified version of [method ResourceLoader.load], which "
-"can be used for more advanced scenarios."
-msgstr ""
-"Lädt eine Resource vom Dateisystem im Pfad [code]path[/code]. Diese Resource "
-"wird direkt beim Aufruf der Methode geladen (es sei denn, sie wird bereits "
-"an einer anderen Stelle referenziert, z.B. in einem anderen Skript oder in "
-"einer Szene), wodurch eine kleine Verzögerung entstehen kann. Im Besonderen, "
-"während Szenen geladen werden. Um beim mehrfachen Laden derselben Resource "
-"diese unnötigen Verzögerungen zu vermeiden, speichere die geladene Resource "
-"entweder in einer Variablen oder verwende [method preload].\n"
-"[b]Anmerkung:[/b] Resourcepfade erhält man durch einen Rechtsklick auf eine "
-"Resource im Dateisystem #TODO# und Auswahl von \"Copy Path\" oder indem die "
-"Datei vom Dateisystem #TODO# in das Skript gezogen wird.\n"
-"[codeblock]\n"
-"# Load a scene called main located in the root of the project directory and "
-"cache it in a variable.\n"
-"var main = load(\"res://main.tscn\") # main will contain a PackedScene "
-"resource.\n"
-"[/codeblock]\n"
-"[b]Important:[/b] The path must be absolute, a local path will just return "
-"[code]null[/code]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Natural logarithm. The amount of time needed to reach a certain level of "
-"continuous growth.\n"
-"[b]Note:[/b] This is not the same as the \"log\" function on most "
-"calculators, which uses a base 10 logarithm.\n"
-"[codeblock]\n"
-"log(10) # Returns 2.302585\n"
-"[/codeblock]\n"
-"[b]Note:[/b] The logarithm of [code]0[/code] returns [code]-inf[/code], "
-"while negative values return [code]-nan[/code]."
-msgstr ""
-"Natürlicher Logarithmus. Der benötigte Zeitwert um eine gewisse Stufe eines "
-"fortlaufenden Wachstums zu erreichen.\n"
-"[b]Hinweis:[/b] Dies ist nicht dasselbe wie die \"log\" Funktion eines "
-"Taschenrechners, welche einen Basis 10 Logarithmus nutzt.\n"
-"[codeblock]\n"
-"log(10) # liefert 2.302585\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Der Logarithmus von [code]0[/code] liefert [code]-inf[/"
-"code], während negative Werte [code]-nan[/code] zurückgeben."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the maximum of two values.\n"
-"[codeblock]\n"
-"max(1, 2) # Returns 2\n"
-"max(-3.99, -4) # Returns -3.99\n"
-"[/codeblock]"
-msgstr ""
-"Liefert das Maximum zweier Werte.\n"
-"[codeblock]\n"
-"max(1, 2) # gibt 2 zurück\n"
-"max(-3.99, -4) # gibt -3.99 zurück\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the minimum of two values.\n"
-"[codeblock]\n"
-"min(1, 2) # Returns 1\n"
-"min(-3.99, -4) # Returns -4\n"
-"[/codeblock]"
-msgstr ""
-"Liefert das Minimum zweier Werte.\n"
-"[codeblock]\n"
-"min(1, 2) # gibt 1 zurück\n"
-"min(-3.99, -4) # gibt -4 zurück\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Moves [code]from[/code] toward [code]to[/code] by the [code]delta[/code] "
-"value.\n"
-"Use a negative [code]delta[/code] value to move away.\n"
-"[codeblock]\n"
-"move_toward(5, 10, 4) # Returns 9\n"
-"move_toward(10, 5, 4) # Returns 6\n"
-"move_toward(10, 5, -1.5) # Returns 11.5\n"
-"[/codeblock]"
-msgstr ""
-"Verschiebt [code]von[/code] nach [code]zu[/code] mittels dem [code]delta[/"
-"code] Wert.\n"
-"Nutze einen negativen [code]delta[/code] Wert um wegzubewegen.\n"
-"[codeblock]\n"
-"move_toward(5, 10, 4) # Gibt 9 zurück\n"
-"move_toward(10, 5, 4) # Gibt 6 zurück\n"
-"move_toward(10, 5, -1.5) # Gibt 11.5 zurück\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the nearest equal or larger power of 2 for integer [code]value[/"
-"code].\n"
-"In other words, returns the smallest value [code]a[/code] where [code]a = "
-"pow(2, n)[/code] such that [code]value <= a[/code] for some non-negative "
-"integer [code]n[/code].\n"
-"[codeblock]\n"
-"nearest_po2(3) # Returns 4\n"
-"nearest_po2(4) # Returns 4\n"
-"nearest_po2(5) # Returns 8\n"
-"\n"
-"nearest_po2(0) # Returns 0 (this may not be what you expect)\n"
-"nearest_po2(-1) # Returns 0 (this may not be what you expect)\n"
-"[/codeblock]\n"
-"[b]WARNING:[/b] Due to the way it is implemented, this function returns "
-"[code]0[/code] rather than [code]1[/code] for non-positive values of "
-"[code]value[/code] (in reality, 1 is the smallest integer power of 2)."
-msgstr ""
-"Gibt die nächste gleich große oder größere Potenz von 2 für eine Ganzzahl "
-"[code]value[/code] zurück.\n"
-"Anders gesagt, es gibt der kleinste Wert [code]a[/code] zurückgegeben, wobei "
-"[code]a = pow(2, n)[/code], so dass [code]value <= a[/code] für eine nicht-"
-"negative Ganzzahl [code]n[/code].\n"
-"[codeblock]\n"
-"nearest_po2(3) # Gibt 4 zurück\n"
-"nearest_po2(4) # Gibt 4 zurück\n"
-"nearest_po2(5) # Gibt 8 zurück\n"
-"\n"
-"nearest_po2(0) # Gibt 0 zurück (Das mag unerwartet sein)\n"
-"nearest_po2(-1) # Gibt 0 zurück (Das mag unerwartet sein)\n"
-"[/codeblock]\n"
-"[b]WARNUNG:[/b] Aufgrund der Art und Weise, wie sie implementiert ist, gibt "
-"diese Funktion bei nicht-positiven Werten von [code]value[/code] den Wert "
-"[code]0[/code] anstatt [code]1[/code] zurück (in Wirklichkeit ist 1 die "
-"kleinste ganzzahlige Potenz von 2)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns an integer representing the Unicode code point of the given Unicode "
-"character [code]char[/code].\n"
-"[codeblock]\n"
-"a = ord(\"A\") # a is 65\n"
-"a = ord(\"a\") # a is 97\n"
-"a = ord(\"€\") # a is 8364\n"
-"[/codeblock]\n"
-"This is the inverse of [method char]."
-msgstr ""
-"Gibt den Integerwert zurück, der das übergebene Unicode-Zeichen [code]char[/"
-"code] repräsentiert.\n"
-"[codeblock]\n"
-"a = ord(\"A\") # a ist 65\n"
-"a = ord(\"a\") # a ist 97\n"
-"a = ord(\"€\") # a ist 8364\n"
-"[/codeblock]\n"
-"Dies entspricht der Umkehrfunktion von [method char]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Parse JSON text to a Variant. (Use [method typeof] to check if the Variant's "
-"type is what you expect.)\n"
-"[b]Note:[/b] The JSON specification does not define integer or float types, "
-"but only a [i]number[/i] type. Therefore, parsing a JSON text will convert "
-"all numerical values to [float] types.\n"
-"[b]Note:[/b] JSON objects do not preserve key order like Godot dictionaries, "
-"thus, you should not rely on keys being in a certain order if a dictionary "
-"is constructed from JSON. In contrast, JSON arrays retain the order of their "
-"elements:\n"
-"[codeblock]\n"
-"var p = JSON.parse('[\"hello\", \"world\", \"!\"]')\n"
-"if typeof(p.result) == TYPE_ARRAY:\n"
-"    print(p.result[0]) # Prints \"hello\"\n"
-"else:\n"
-"    push_error(\"Unexpected results.\")\n"
-"[/codeblock]\n"
-"See also [JSON] for an alternative way to parse JSON text."
-msgstr ""
-"Parst einen JSON Text, um damit eine Variante zu füllen. (Verwende [method "
-"typeof], um zu prüfen, ob hier der erwartete Variantentyp vorliegt.)\n"
-"[b]Anmerkung:[/b] Die JSON Spezifikation definiert keine Integer- oder "
-"Fließkommatypen, dafür aber einen allgemeinen numerischen [i]Zahl[/i] Typ. "
-"Aus diesem Grund werden alle numerischen Zahlen in [float] Typen "
-"umgewandelt.\n"
-"[b]Anmerkung:[/b] JSON Objekte sortieren Schlüsselfelder nicht so wie Godot "
-"dies in Dictionaries tut. Deshalb solltest du dich nicht darauf verlassen, "
-"das Schlüsselfelder in einer bestimmten Reihenfolge vorliegen, nachdem ein "
-"Dictionary aus einem JSON Text konstruiert wurde. Im Gegensatz dazu behalten "
-"JSON Arrays die Reihenfolge ihrer Elemente bei:\n"
-"[codeblock]\n"
-"var p = JSON.parse('[\"hello\", \"world\", \"!\"]')\n"
-"if typeof(p.result) == TYPE_ARRAY:\n"
-"    print(p.result[0]) # Gibt \"hello\" aus\n"
-"else:\n"
-"    push_error(\"Unexpected results.\")\n"
-"[/codeblock]\n"
-"Siehe auch [JSON] als Alternative, um einen JSON Text zu parsen."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Converts a 2D point expressed in the polar coordinate system (a distance "
-"from the origin [code]r[/code] and an angle [code]th[/code]) to the "
-"cartesian coordinate system (X and Y axis)."
-msgstr ""
-"Konvertiert eine im Polarkoordinatensystem gegebene 2D-Position (Entfernung "
-"[code]r[/code] zum Ursprung und Winkel [code]th[/code]) in das kartesische "
-"Koordinatensystem (X- und Y-Achse)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Returns the integer modulus of [code]a/b[/code] that wraps equally in "
-"positive and negative.\n"
-"[codeblock]\n"
-"for i in range(-3, 4):\n"
-"    print(\"%2d %2d %2d\" % [i, i % 3, posmod(i, 3)])\n"
-"[/codeblock]\n"
-"Produces:\n"
-"[codeblock]\n"
-"-3  0  0\n"
-"-2 -2  1\n"
-"-1 -1  2\n"
-" 0  0  0\n"
-" 1  1  1\n"
-" 2  2  2\n"
-" 3  0  0\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Integer-Modulo von [code]a/b[/code] zurück, der bei positiven und "
-"negativen Zahlen gleichermaßen auf Null zurückspringt.\n"
-"[codeblock]\n"
-"var i = -6\n"
-"while i < 5:\n"
-"    prints(i, posmod(i, 3))\n"
-"    i += 1\n"
-"[/codeblock]\n"
-"Produziert:\n"
-"[codeblock]\n"
-"-6 0\n"
-"-5 1\n"
-"-4 2\n"
-"-3 0\n"
-"-2 1\n"
-"-1 2\n"
-"0 0\n"
-"1 1\n"
-"2 2\n"
-"3 0\n"
-"4 1\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the result of [code]base[/code] raised to the power of [code]exp[/"
-"code].\n"
-"[codeblock]\n"
-"pow(2, 5) # Returns 32.0\n"
-"[/codeblock]"
-msgstr ""
-"Liefert das Ergebnis von [code]x[/code] hoch [code]y[/code].\n"
-"[codeblock]\n"
-"pow(2, 5) # liefert 32.0\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a [Resource] from the filesystem located at [code]path[/code]. The "
-"resource is loaded during script parsing, i.e. is loaded with the script and "
-"[method preload] effectively acts as a reference to that resource. Note that "
-"the method requires a constant path. If you want to load a resource from a "
-"dynamic/variable path, use [method load].\n"
-"[b]Note:[/b] Resource paths can be obtained by right clicking on a resource "
-"in the Assets Panel and choosing \"Copy Path\" or by dragging the file from "
-"the FileSystem dock into the script.\n"
-"[codeblock]\n"
-"# Instance a scene.\n"
-"var diamond = preload(\"res://diamond.tscn\").instance()\n"
-"[/codeblock]"
-msgstr ""
-"Gibt eine [Resource] aus dem Dateisystem zurück, das sich unter [code]path[/"
-"code] befindet. Die Ressource wird während der Skriptanalyse geladen, d. h. "
-"es wird mit dem Skript geladen, und die [method preload] Methode fungiert "
-"effektiv als Referenz auf diese Ressource. Beachten Sie, dass die Methode "
-"einen konstanten Pfad erfordert. Wenn Sie eine Ressource aus einem "
-"dynamischen / variablen Pfad laden möchten, verwenden Sie die [method load] "
-"Methode.\n"
-"[b]Hinweis:[/b] Ressourcenpfade erhalten Sie, indem Sie im Assets-Bedienfeld "
-"mit der rechten Maustaste auf eine Ressource klicken und \"Pfad kopieren\" "
-"auswählen oder die Datei aus dem Dateisystempanel in das Skript ziehen.\n"
-"[codeblock]\n"
-"# Eine Szene instanziieren.\n"
-"var diamond = preload(\"res://diamond.tscn\").instance()\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts one or more arguments of any type to string in the best way "
-"possible and prints them to the console.\n"
-"[codeblock]\n"
-"a = [1, 2, 3]\n"
-"print(\"a\", \"=\", a) # Prints a=[1, 2, 3]\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Consider using [method push_error] and [method push_warning] to "
-"print error and warning messages instead of [method print]. This "
-"distinguishes them from print messages used for debugging purposes, while "
-"also displaying a stack trace when an error or warning is printed."
-msgstr ""
-"Wandelt ein oder mehrere Argumente aller Typen bestmöglich in Zeichenketten "
-"um und gibt sie in der Konsole aus.\n"
-"[codeblock]\n"
-"var a = [1,2,3]\n"
-"print(\"a\",\"=\",a) # Schreibt \"a=[1,2,3]\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Benutze [method push_error] und [method push_warning] statt "
-"[method print] um Fehlermeldungen und Warnungen auszugeben. Sie "
-"unterscheiden sich von normalen Ausgaben und geben zusätzlich einen Stack-"
-"Trace aus."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Like [method print], but includes the current stack frame when running with "
-"the debugger turned on.\n"
-"Output in the console would look something like this:\n"
-"[codeblock]\n"
-"Test print\n"
-"   At: res://test.gd:15:_process()\n"
-"[/codeblock]"
-msgstr ""
-"Gibt einen Stacktrace zum Quelltextort aus, funktioniert nur wenn das "
-"\"Ausführen mit Debugger\" aktiviert ist.\n"
-"Die Ausgabe in der Konsole würde ungefähr so aussehen:\n"
-"[codeblock]\n"
-"Frame 0 - res://test.gd:16 in function '_process'\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Prints a stack trace at the current code location. See also [method "
-"get_stack].\n"
-"Output in the console would look something like this:\n"
-"[codeblock]\n"
-"Frame 0 - res://test.gd:16 in function '_process'\n"
-"[/codeblock]\n"
-"[b]Note:[/b] [method print_stack] only works if the running instance is "
-"connected to a debugging server (i.e. an editor instance). [method "
-"print_stack] will not work in projects exported in release mode, or in "
-"projects exported in debug mode if not connected to a debugging server."
-msgstr ""
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Prints one or more arguments to strings in the best way possible to standard "
-"error line.\n"
-"[codeblock]\n"
-"printerr(\"prints to stderr\")\n"
-"[/codeblock]"
-msgstr ""
-"Gibt ein oder mehrere Argumente bestmöglich als Zeichenketten zu standard "
-"error line aus.\n"
-"[codeblock]\n"
-"printerr(\"prints to stderr\")\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Prints one or more arguments to strings in the best way possible to console. "
-"No newline is added at the end.\n"
-"[codeblock]\n"
-"printraw(\"A\")\n"
-"printraw(\"B\")\n"
-"# Prints AB\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Due to limitations with Godot's built-in console, this only "
-"prints to the terminal. If you need to print in the editor, use another "
-"method, such as [method print]."
-msgstr ""
-"Gibt ein oder mehrere Argumente bestmöglich als Zeichenketten in der Konsole "
-"aus. Am Ende wird kein Zeilenumbruch hinzugefügt.\n"
-"[codeblock]\n"
-"printraw(\"A\")\n"
-"printraw(\"B\")\n"
-"# Prints AB\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Durch Einschränkungen von Godot's integrierten Konsole, gibt "
-"dies nur Text im Terminal aus. Wenn Sie Text im Editor ausgeben müssen, "
-"benutzen sie eine andere Methode wie [method print]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Prints one or more arguments to the console with a space between each "
-"argument.\n"
-"[codeblock]\n"
-"prints(\"A\", \"B\", \"C\") # Prints A B C\n"
-"[/codeblock]"
-msgstr ""
-"Gibt ein oder mehrere Argumente mit Leerzeichen zwischen jedem Argument in "
-"der Konsole aus.\n"
-"[codeblock]\n"
-"prints(\"A\", \"B\", \"C\") # Prints A B C\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Prints one or more arguments to the console with a tab between each "
-"argument.\n"
-"[codeblock]\n"
-"printt(\"A\", \"B\", \"C\") # Prints A       B       C\n"
-"[/codeblock]"
-msgstr ""
-"Gibt ein oder mehrere Argumente in der Konsole mit Tabulatoren zwischen "
-"jedem Argument in der Konsole aus.\n"
-"[codeblock]\n"
-"printt(\"A\", \"B\", \"C\") # Prints A       B       C\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Pushes an error message to Godot's built-in debugger and to the OS "
-"terminal.\n"
-"[codeblock]\n"
-"push_error(\"test error\") # Prints \"test error\" to debugger and terminal "
-"as error call\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Errors printed this way will not pause project execution. To "
-"print an error message and pause project execution in debug builds, use "
-"[code]assert(false, \"test error\")[/code] instead."
-msgstr ""
-"Gibt eine Fehlermeldung an Godots integrierten Debugger und an das "
-"Betriebssystem-Terminal aus.\n"
-"[codeblock]\n"
-"push_error(\"test error\") # Gibt \"test error\" als Fehleraufruf an "
-"Debugger und Terminal aus\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Fehler, die auf diese Weise ausgegeben werden, halten die "
-"Projektausführung nicht an. Um eine Fehlermeldung auszugeben und die "
-"Projektausführung in Debug-Builds anzuhalten, verwenden Sie stattdessen "
-"[code]assert(false, \"test error\")[/code]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Pushes a warning message to Godot's built-in debugger and to the OS "
-"terminal.\n"
-"[codeblock]\n"
-"push_warning(\"test warning\") # Prints \"test warning\" to debugger and "
-"terminal as warning call\n"
-"[/codeblock]"
-msgstr ""
-"Gibt eine Warnmeldung in Godot's integriertem Debugger und in der OS Konsole "
-"aus.\n"
-"[codeblock]\n"
-"push_warning(\"test warning\") # Gibt \"test warning\" im Debugger und im "
-"Terminal als Warnmeldung aus.\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts an angle expressed in radians to degrees.\n"
-"[codeblock]\n"
-"rad2deg(0.523599) # Returns 30.0\n"
-"[/codeblock]"
-msgstr ""
-"Konvertiert einen Winkel von Radiant nach Grad.\n"
-"[codeblock]\n"
-"rad2deg(0.523599) # Returns 30\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Returns a random floating point value between [code]from[/code] and "
-"[code]to[/code] (both endpoints inclusive).\n"
-"[codeblock]\n"
-"prints(rand_range(0, 1), rand_range(0, 1)) # Prints e.g. 0.135591 0.405263\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This is equivalent to [code]randf() * (to - from) + from[/code]."
-msgstr ""
-"Gibt einen Zufallswert zwischen [code]from[/code] und [code]to[/code] "
-"zurück.\n"
-"[codeblock]\n"
-"prints(rand_range(0, 1), rand_range(0, 1)) # Gibt zum Beispiel \"0.135591 "
-"0.405263\" aus\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Random from seed: pass a [code]seed[/code], and an array with both number "
-"and new seed is returned. \"Seed\" here refers to the internal state of the "
-"pseudo random number generator. The internal state of the current "
-"implementation is 64 bits."
-msgstr ""
-"Zufall durch Seed: Gib einen [code]seed[/code] und ein Array mit einer Zahl "
-"und einem neuen Seed wird wiedergegeben. \"Seed\" bezieht sich hier auf den "
-"internen Stand des pseudo Zufallszahlengenerators. Der interne Zustand der "
-"momentanen Implementation besteht aus 64 bits."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a random floating point value on the interval [code][0, 1][/code].\n"
-"[codeblock]\n"
-"randf() # Returns e.g. 0.375671\n"
-"[/codeblock]"
-msgstr ""
-"Gibt einen zufälligen Fließkommawert im Intervall [code][0, 1][/code] "
-"zurück.\n"
-"[codeblock]\n"
-"randf() # Returns e.g. 0.375671\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a random unsigned 32-bit integer. Use remainder to obtain a random "
-"value in the interval [code][0, N - 1][/code] (where N is smaller than "
-"2^32).\n"
-"[codeblock]\n"
-"randi()           # Returns random integer between 0 and 2^32 - 1\n"
-"randi() % 20      # Returns random integer between 0 and 19\n"
-"randi() % 100     # Returns random integer between 0 and 99\n"
-"randi() % 100 + 1 # Returns random integer between 1 and 100\n"
-"[/codeblock]"
-msgstr ""
-"Gibt einen zufälligen vorzeichenlosen 32-Bit Integerwert zurück. Verwende "
-"Modulo, um einen Zufallswert im Intervall [code][0, N - 1][/code] zu "
-"erhalten (wobei N kleiner als 2^32 ist).\n"
-"[codeblock]\n"
-"randi()           # Gibt Zufallswert zwischen 0 und 2^32 - 1 zurück "
-"(inklusiv)\n"
-"randi() % 20      # Gibt einen Zufallswert zwischen 0 and 19 zurück "
-"(inklusiv)\n"
-"randi() % 100     # Gibt einen Zufallswert zwischen 0 und 99 zurück "
-"(inklusiv)\n"
-"randi() % 100 + 1 # Gibt einen Zufallswert zwischen 1 and 100 zurück "
-"(inklusiv)\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Randomizes the seed (or the internal state) of the random number generator. "
-"Current implementation reseeds using a number based on time.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    randomize()\n"
-"[/codeblock]"
-msgstr ""
-"Wählt einen zufälligen (internen) Startwert für den Zufallszahlengenerator "
-"aus. Die aktuelle Implementation verwendet dazu einen Startwert, der auf der "
-"aktuellen Zeit basiert.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    randomize()\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns an array with the given range. [method range] can be called in three "
-"ways:\n"
-"[code]range(n: int)[/code]: Starts from 0, increases by steps of 1, and "
-"stops [i]before[/i] [code]n[/code]. The argument [code]n[/code] is "
-"[b]exclusive[/b].\n"
-"[code]range(b: int, n: int)[/code]: Starts from [code]b[/code], increases by "
-"steps of 1, and stops [i]before[/i] [code]n[/code]. The arguments [code]b[/"
-"code] and [code]n[/code] are [b]inclusive[/b] and [b]exclusive[/b], "
-"respectively.\n"
-"[code]range(b: int, n: int, s: int)[/code]: Starts from [code]b[/code], "
-"increases/decreases by steps of [code]s[/code], and stops [i]before[/i] "
-"[code]n[/code]. The arguments [code]b[/code] and [code]n[/code] are "
-"[b]inclusive[/b] and [b]exclusive[/b], respectively. The argument [code]s[/"
-"code] [b]can[/b] be negative, but not [code]0[/code]. If [code]s[/code] is "
-"[code]0[/code], an error message is printed.\n"
-"[method range] converts all arguments to [int] before processing.\n"
-"[b]Note:[/b] Returns an empty array if no value meets the value constraint "
-"(e.g. [code]range(2, 5, -1)[/code] or [code]range(5, 5, 1)[/code]).\n"
-"Examples:\n"
-"[codeblock]\n"
-"print(range(4))        # Prints [0, 1, 2, 3]\n"
-"print(range(2, 5))     # Prints [2, 3, 4]\n"
-"print(range(0, 6, 2))  # Prints [0, 2, 4]\n"
-"print(range(4, 1, -1)) # Prints [4, 3, 2]\n"
-"[/codeblock]\n"
-"To iterate over an [Array] backwards, use:\n"
-"[codeblock]\n"
-"var array = [3, 6, 9]\n"
-"for i in range(array.size(), 0, -1):\n"
-"    print(array[i - 1])\n"
-"[/codeblock]\n"
-"Output:\n"
-"[codeblock]\n"
-"9\n"
-"6\n"
-"3\n"
-"[/codeblock]"
-msgstr ""
-"Gibt ein Array mit dem angegebenen Bereich zurück. Die [Methode range] kann "
-"auf drei Arten aufgerufen werden:\n"
-"[code]range(n: int)[/code]: Beginnt bei 0, erhöht sich in Schritten von 1 "
-"und endet [i]vor[/i] [code]n[/code]. Das Argument [code]n[/code] ist "
-"[b]exklusiv[/b].\n"
-"[code]range(b: int, n: int)[/code]: Beginnt bei [code]b[/code], erhöht sich "
-"in Schritten von 1 und endet [i]vor[/i] [code]n[/code]. Die Argumente "
-"[code]b[/code] und [code]n[/code] sind [b]inklusive[/b] bzw. [b]exklusive[/"
-"b].\n"
-"[code]bereich(b: int, n: int, s: int)[/code]: Beginnt bei [code]b[/code], "
-"erhöht/verringert sich um Schritte von [code]s[/code] und endet [i]vor[/i] "
-"[code]n[/code]. Die Argumente [code]b[/code] und [code]n[/code] sind "
-"[b]inklusive[/b] bzw. [b]exklusive[/b]. Das Argument [code]s[/code] [b]kann[/"
-"b] negativ sein, aber nicht [code]0[/code]. Wenn [code]s[/code] [code]0[/"
-"code] ist, wird eine Fehlermeldung ausgegeben.\n"
-"Der [Methodenbereich] wandelt alle Argumente vor der Verarbeitung in [int] "
-"um.\n"
-"[b]Hinweis:[/b] Gibt ein leeres Array zurück, wenn kein Wert die "
-"Werteinschränkung erfüllt (z. B. [code]range(2, 5, -1)[/code] oder "
-"[code]range(5, 5, 1)[/code]).\n"
-"Beispiele:\n"
-"[codeblock]\n"
-"print(bereich(4))        # Gibt [0, 1, 2, 3] aus\n"
-"print(bereich(2, 5))     # Gibt [2, 3, 4] aus\n"
-"print(range(0, 6, 2))  # Gibt [0, 2, 4] aus\n"
-"print(range(4, 1, -1)) # Gibt [4, 3, 2] aus\n"
-"[/codeblock]\n"
-"Um rückwärts über ein [Array] zu iterieren, benutze:\n"
-"[codeblock]\n"
-"var array = [3, 6, 9]\n"
-"for i in range(array.size(), 0, -1):\n"
-"    print(array[i - 1])\n"
-"[/codeblock]\n"
-"Ausgabe:\n"
-"[codeblock]\n"
-"9\n"
-"6\n"
-"3\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Maps a [code]value[/code] from range [code][istart, istop][/code] to [code]"
-"[ostart, ostop][/code]. See also [method lerp] and [method inverse_lerp]. If "
-"[code]value[/code] is outside [code][istart, istop][/code], then the "
-"resulting value will also be outside [code][ostart, ostop][/code]. Use "
-"[method clamp] on the result of [method range_lerp] if this is not desired.\n"
-"[codeblock]\n"
-"range_lerp(75, 0, 100, -1, 1) # Returns 0.5\n"
-"[/codeblock]\n"
-"For complex use cases where you need multiple ranges, consider using [Curve] "
-"or [Gradient] instead."
-msgstr ""
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Rounds [code]s[/code] to the nearest whole number, with halfway cases "
-"rounded away from zero.\n"
-"[codeblock]\n"
-"a = round(2.49) # a is 2.0\n"
-"a = round(2.5)  # a is 3.0\n"
-"a = round(2.51) # a is 3.0\n"
-"[/codeblock]\n"
-"See also [method floor], [method ceil], [method stepify], and [int]."
-msgstr ""
-"Rundet [code]s[/code] auf die nächstliegende ganze Zahl, wobei halbe Werte "
-"aufgerundet werden.\n"
-"[codeblock]\n"
-"a = round(2.49) # a ist 2.0\n"
-"a = round(2.5)  # a ist 3.0\n"
-"a = round(2.51) # a ist 3,0\n"
-"[/codeblock]\n"
-"Siehe auch [method floor], [method ceil], [method stepify], und [int]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Sets seed for the random number generator.\n"
-"[codeblock]\n"
-"my_seed = \"Godot Rocks\"\n"
-"seed(my_seed.hash())\n"
-"[/codeblock]"
-msgstr ""
-"Setzt einen neuen Startwert für den Zufallszahlengenerator.\n"
-"[codeblock]\n"
-"my_seed = \"Godot Rocks\"\n"
-"seed(my_seed.hash())\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the sign of [code]s[/code]: -1 or 1. Returns 0 if [code]s[/code] is "
-"0.\n"
-"[codeblock]\n"
-"sign(-6) # Returns -1\n"
-"sign(0)  # Returns 0\n"
-"sign(6)  # Returns 1\n"
-"[/codeblock]"
-msgstr ""
-"Gibt das Vorzeichen von [code]s[/code] zurück: -1 oder 1. Gibt 0 zurück, "
-"wenn [code]s[/code] Null ist.\n"
-"[codeblock]\n"
-"sign(-6) # Returns -1\n"
-"sign(0)  # Returns 0\n"
-"sign(6)  # Returns 1\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the sine of angle [code]s[/code] in radians.\n"
-"[codeblock]\n"
-"sin(0.523599) # Returns 0.5\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Sinus des Winkels [code]s[/code] in Radiant zurück.\n"
-"[codeblock]\n"
-"sin(0.523599) # Returns 0.5\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the hyperbolic sine of [code]s[/code].\n"
-"[codeblock]\n"
-"a = log(2.0) # Returns 0.693147\n"
-"sinh(a) # Returns 0.75\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den Hyperbelsinus von [code]s[/code] zurück.\n"
-"[codeblock]\n"
-"a = log(2.0) # Returns 0.693147\n"
-"sinh(a) # Returns 0.75\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-#, fuzzy
-msgid ""
-"Returns the result of smoothly interpolating the value of [code]s[/code] "
-"between [code]0[/code] and [code]1[/code], based on the where [code]s[/code] "
-"lies with respect to the edges [code]from[/code] and [code]to[/code].\n"
-"The return value is [code]0[/code] if [code]s <= from[/code], and [code]1[/"
-"code] if [code]s >= to[/code]. If [code]s[/code] lies between [code]from[/"
-"code] and [code]to[/code], the returned value follows an S-shaped curve that "
-"maps [code]s[/code] between [code]0[/code] and [code]1[/code].\n"
-"This S-shaped curve is the cubic Hermite interpolator, given by [code]f(y) = "
-"3*y^2 - 2*y^3[/code] where [code]y = (x-from) / (to-from)[/code].\n"
-"[codeblock]\n"
-"smoothstep(0, 2, -5.0) # Returns 0.0\n"
-"smoothstep(0, 2, 0.5) # Returns 0.15625\n"
-"smoothstep(0, 2, 1.0) # Returns 0.5\n"
-"smoothstep(0, 2, 2.0) # Returns 1.0\n"
-"[/codeblock]\n"
-"Compared to [method ease] with a curve value of [code]-1.6521[/code], "
-"[method smoothstep] returns the smoothest possible curve with no sudden "
-"changes in the derivative. If you need to perform more advanced transitions, "
-"use [Tween] or [AnimationPlayer].\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/3.5/img/"
-"smoothstep_ease_comparison.png]Comparison between smoothstep() and ease(x, "
-"-1.6521) return values[/url]"
-msgstr ""
-"Gibt das Ergebnis einer Interpolation des Wertes [code]s[/code] zwischen "
-"[code]0[/code] und [code]1[/code] wieder, basierend auf der Lage von "
-"[code]s[/code] mit Bezug auf [code]from[/code] und [code]to[/code].\n"
-"Der zurückgegebene Wert ist [code]0[/code] wenn [code]s <= from[/code] und "
-"[code]1[/code] wenn [code]s >= to[/code]. Falls [code]s[/code] zwischen "
-"[code]from[/code] und [code]to[/code] liegt, folgt der zurückgegebene Wert "
-"einer S-Kurve, welche [code]s[/code] zwischen [code]0[/code] und [code]1[/"
-"code] legt.\n"
-"Die S-Kurve entspricht der Kubisch Hermitescher Spline, gegeben durch "
-"[code]f(s) = 3*s^2 - 2*s^3[/code].\n"
-"[codeblock]\n"
-"smoothstep(0, 2, -5.0) # Ergebnis 0.0\n"
-"smoothstep(0, 2, 0.5) # Ergebnis 0.15625\n"
-"smoothstep(0, 2, 1.0) # Ergebnis 0.5\n"
-"smoothstep(0, 2, 2.0) # Ergebnis 1.0\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the square root of [code]s[/code], where [code]s[/code] is a non-"
-"negative number.\n"
-"[codeblock]\n"
-"sqrt(9) # Returns 3\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Negative values of [code]s[/code] return NaN. If you need "
-"negative inputs, use [code]System.Numerics.Complex[/code] in C#."
-msgstr ""
-"Gibt die Quadratwurzel von [code]s[/code] zurück, wobei [code]s[/code] eine "
-"nicht-negative Zahl ist.\n"
-"[codeblock]\n"
-"sqrt(9) # Ergibt 3\n"
-"[/codeblock]\n"
-"[b]Notiz:[/b]Negative Werte von [code]s[/code] ergeben NaN. Falls Sie die "
-"Quadratwurzel negativer Zahlen ziehen müssen, verwenden Sie [code]System."
-"Numerics.Complex[/code] in C#."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the position of the first non-zero digit, after the decimal point. "
-"Note that the maximum return value is 10, which is a design decision in the "
-"implementation.\n"
-"[codeblock]\n"
-"n = step_decimals(5)           # n is 0\n"
-"n = step_decimals(1.0005)      # n is 4\n"
-"n = step_decimals(0.000000005) # n is 9\n"
-"[/codeblock]"
-msgstr ""
-"Gibt die Position der ersten nicht-null Ziffer nach dem Dezimalpunkt zurück. "
-"Merke, dass der höchste Rückgabewert 10 ist, was eine Entwurfsentscheidung "
-"in der Implementation ist.\n"
-"[codeblock]\n"
-"n = step_decimals(5) # n ist 0\n"
-"n = step_decimals(1.0005) # n ist 4\n"
-"n = step_decimals(0.000000005) # n ist 9\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Snaps float value [code]s[/code] to a given [code]step[/code]. This can also "
-"be used to round a floating point number to an arbitrary number of "
-"decimals.\n"
-"[codeblock]\n"
-"stepify(100, 32) # Returns 96.0\n"
-"stepify(3.14159, 0.01) # Returns 3.14\n"
-"[/codeblock]\n"
-"See also [method ceil], [method floor], [method round], and [int]."
-msgstr ""
-"Rastet den Gleitkommazahlwert [code]s[/code] auf einen gegebenen [code]step[/"
-"code]. Dies kann auch zum Runden einer Gleitkommazahl auf eine willkürliche "
-"Anzahl von Dezimalzen genutzt werden.\n"
-"[codeblock]\n"
-"stepify(100, 32) # Gibt 96.0 aus\n"
-"stepify(3.14159, 0.01) # Gibt 3.14 aus\n"
-"[/codeblock]\n"
-"Siehe auch [method ceil], [method floor], [method round], und [int]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts one or more arguments of any type to string in the best way "
-"possible.\n"
-"[codeblock]\n"
-"var a = [10, 20, 30]\n"
-"var b = str(a);\n"
-"len(a) # Returns 3\n"
-"len(b) # Returns 12\n"
-"[/codeblock]"
-msgstr ""
-"Konvertiert ein oder mehrere Argumente bestmöglich zu einer Zeichenkette.\n"
-"[codeblock]\n"
-"var a = [10, 20, 30]\n"
-"var b = str(a);\n"
-"len(a) # Ergibt 3\n"
-"len(b) # Ergibt 12\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts a formatted string that was returned by [method var2str] to the "
-"original value.\n"
-"[codeblock]\n"
-"a = '{ \"a\": 1, \"b\": 2 }'\n"
-"b = str2var(a)\n"
-"print(b[\"a\"]) # Prints 1\n"
-"[/codeblock]"
-msgstr ""
-"Konvertiert eine formatierte Zeichenkette welche von [method var2str] "
-"wiedergegeben wurde zurück zum originalen Wert.\n"
-"[codeblock]\n"
-"a = '{ \"a\": 1, \"b\": 2 }'\n"
-"b = str2var(a)\n"
-"print(b[\"a\"]) # Prints 1\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the tangent of angle [code]s[/code] in radians.\n"
-"[codeblock]\n"
-"tan(deg2rad(45)) # Returns 1\n"
-"[/codeblock]"
-msgstr ""
-"Gibt die Tangente vom Winkel [code]s[/code] im Bogenmaß zurück.\n"
-"[codeblock]\n"
-"tan(deg2rad(45)) # Returns 1\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the hyperbolic tangent of [code]s[/code].\n"
-"[codeblock]\n"
-"a = log(2.0) # a is 0.693147\n"
-"b = tanh(a)  # b is 0.6\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den hyperbolischen Tangens von [code]s[/code] zurück.\n"
-"[codeblock]\n"
-"a = log(2.0) # Returns 0.693147\n"
-"tanh(a)      # Returns 0.6\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts a [Variant] [code]var[/code] to JSON text and return the result. "
-"Useful for serializing data to store or send over the network.\n"
-"[codeblock]\n"
-"# Both numbers below are integers.\n"
-"a = { \"a\": 1, \"b\": 2 }\n"
-"b = to_json(a)\n"
-"print(b) # {\"a\":1, \"b\":2}\n"
-"# Both numbers above are floats, even if they display without any decimal "
-"places.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] The JSON specification does not define integer or float types, "
-"but only a [i]number[/i] type. Therefore, converting a [Variant] to JSON "
-"text will convert all numerical values to [float] types.\n"
-"See also [JSON] for an alternative way to convert a [Variant] to JSON text."
-msgstr ""
-"Konvertiert einen [Variant] [code]var[/code] in einen JSON Text und liefert "
-"das Ergebnis zurück. Nützlich, um Daten zu serialisieren und sie über das "
-"Netzwerk zu speichern oder zu versenden.\n"
-"[codeblock]\n"
-"# Beide Zahlen unten sind Ganzzahlwerte.\n"
-"a = { \"a\": 1, \"b\": 2 }\n"
-"b = to_json(a)\n"
-"print(b) # {\"a\":1, \"b\":2}\n"
-"# Beide Zahlen oben sind Fließkommawerte, auch wenn sie ohne Dezimalstellen "
-"dargestellt werden.\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Die JSON Spezifikation gibt weder Ganzzahl- noch "
-"Fließkommawerte, sondern lediglich den [i]number[/i] Typen vor. Deshalb "
-"werden bei der Konvertierung von [Variant] zu JSON alle numerischen Werte in "
-"den [float] Typen umgewandelt.\n"
-"Siehe auch [JSON] für eine Alternative Konvertierung von [Variant] zu JSON "
-"Text."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns whether the given class exists in [ClassDB].\n"
-"[codeblock]\n"
-"type_exists(\"Sprite\") # Returns true\n"
-"type_exists(\"Variant\") # Returns false\n"
-"[/codeblock]"
-msgstr ""
-"Gibt zurück ob die gegebene Klasse in [ClassDB] existiert.\n"
-"[codeblock]\n"
-"type_exists(\"Sprite\") # Ergibt true\n"
-"type_exists(\"Variant\") # Ergibt false\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns the internal type of the given Variant object, using the [enum "
-"Variant.Type] values.\n"
-"[codeblock]\n"
-"p = parse_json('[\"a\", \"b\", \"c\"]')\n"
-"if typeof(p) == TYPE_ARRAY:\n"
-"    print(p[0]) # Prints a\n"
-"else:\n"
-"    print(\"unexpected results\")\n"
-"[/codeblock]"
-msgstr ""
-"Gibt den internen Dateityp von dem gegebenen Variant Objekt zurück. Hierbei "
-"werden die [enum Variant.Type] Werte verwendet.\n"
-"[codeblock]\n"
-"p = parse_json('[\"a\", \"b\", \"c\"]')\n"
-"if typeof(p) == TYPE_ARRAY:\n"
-"    print(p[0]) # Prints a\n"
-"else:\n"
-"    print(\"unexpected results\")\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Checks that [code]json[/code] is valid JSON data. Returns an empty string if "
-"valid, or an error message otherwise.\n"
-"[codeblock]\n"
-"j = to_json([1, 2, 3])\n"
-"v = validate_json(j)\n"
-"if not v:\n"
-"    print(\"Valid JSON.\")\n"
-"else:\n"
-"    push_error(\"Invalid JSON: \" + v)\n"
-"[/codeblock]"
-msgstr ""
-"Überprüft, ob [code]json[/code] valide JSON Daten beinhaltet. In diesem Fall "
-"wird ein leerer String zurückgegeben, ansonsten eine Fehlermeldung.\n"
-"[codeblock]\n"
-"j = to_json([1, 2, 3])\n"
-"v = validate_json(j)\n"
-"if not v:\n"
-"    print(\"Valid JSON.\")\n"
-"else:\n"
-"    push_error(\"Invalid JSON: \" + v)\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Encodes a variable value to a byte array. When [code]full_objects[/code] is "
-"[code]true[/code] encoding objects is allowed (and can potentially include "
-"code)."
-msgstr ""
-"Kodiert eine Variable zu einem Byte Array. Wenn [code]full_objects[/code] "
-"ist [code]true[/code], wird das Kodieren von Objekten erlaubt (und kann "
-"potentiell auch Quelltext enthalten)."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Converts a Variant [code]var[/code] to a formatted string that can later be "
-"parsed using [method str2var].\n"
-"[codeblock]\n"
-"a = { \"a\": 1, \"b\": 2 }\n"
-"print(var2str(a))\n"
-"[/codeblock]\n"
-"prints\n"
-"[codeblock]\n"
-"{\n"
-"\"a\": 1,\n"
-"\"b\": 2\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-"Konvertiert eine Variant [code]var[/code] zu einer formatierten "
-"Zeichenkette, die später durch [method str2var] analysiert werden kann.\n"
-"[codeblock]\n"
-"a = { \"a\": 1, \"b\": 2 }\n"
-"print(var2str(a))\n"
-"[/codeblock]\n"
-"Gibt aus\n"
-"[codeblock]\n"
-"{\n"
-"\"a\": 1,\n"
-"\"b\": 2\n"
-"}\n"
-"[/codeblock]"
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Returns a weak reference to an object.\n"
-"A weak reference to an object is not enough to keep the object alive: when "
-"the only remaining references to a referent are weak references, garbage "
-"collection is free to destroy the referent and reuse its memory for "
-"something else. However, until the object is actually destroyed the weak "
-"reference may return the object even if there are no strong references to it."
-msgstr ""
-"Gibt eine schwache Referenz zu einem Objekt zurück.\n"
-"Eine schwache Referenz zu einem Objekt ist nicht genug um das Objekt zu "
-"erhalten: Wenn die letzten übrigbleibenden Referenzen zu einem referierten "
-"Objekt schwache Referenzen sind, ist das automatisiertes Speichermanagement "
-"(Garbage Collector) in der Lage das referierte Objekt zu zerstören und "
-"Arbeitsspeicher für andere Zwecke wiederzuverwenden. Bis das Objekt "
-"endgültig zerstört wurde, können schwache Referenzen jedoch noch auf das "
-"Objekt zugreifen, selbst wenn es keine starken Referenzen mehr gibt."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Wraps float [code]value[/code] between [code]min[/code] and [code]max[/"
-"code].\n"
-"Usable for creating loop-alike behavior or infinite surfaces.\n"
-"[codeblock]\n"
-"# Infinite loop between 5.0 and 9.9\n"
-"value = wrapf(value + 0.1, 5.0, 10.0)\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# Infinite rotation (in radians)\n"
-"angle = wrapf(angle + 0.1, 0.0, TAU)\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# Infinite rotation (in radians)\n"
-"angle = wrapf(angle + 0.1, -PI, PI)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] If [code]min[/code] is [code]0[/code], this is equivalent to "
-"[method fposmod], so prefer using that instead.\n"
-"[code]wrapf[/code] is more flexible than using the [method fposmod] approach "
-"by giving the user control over the minimum value."
-msgstr ""
-"Fasst float [code]value[/code] zwischen [code]min[/code] und [code]max[/"
-"code] ein.\n"
-"Verwendbar zur Erzeugung von schleifenähnlichem Verhalten oder unendlichen "
-"Oberflächen.\n"
-"[codeblock]\n"
-"# Endlosschleife zwischen 5,0 und 9,9\n"
-"value = wrapf(value + 0.1, 5.0, 10.0)\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# Unendliche Drehung (im Radiant)\n"
-"angle = wrapf(angle + 0.1, 0.0, TAU)\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# Unendliche Drehung (im Bogenmaß)\n"
-"angle = wrapf(angle + 0.1, -PI, PI)\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Wenn [code]min[/code] gleich [code]0[/code], ist das "
-"Ergebnis äquivalent zu [method fposmod], welches bevorzugt verwendet werden "
-"sollte.\n"
-"[code]wrapf[/code] ist flexibler als der [method fposmod]-Ansatz, da es dem "
-"Benutzer die Kontrolle über den Mindestwert gibt."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Wraps integer [code]value[/code] between [code]min[/code] and [code]max[/"
-"code].\n"
-"Usable for creating loop-alike behavior or infinite surfaces.\n"
-"[codeblock]\n"
-"# Infinite loop between 5 and 9\n"
-"frame = wrapi(frame + 1, 5, 10)\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# result is -2\n"
-"var result = wrapi(-6, -5, -1)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] If [code]min[/code] is [code]0[/code], this is equivalent to "
-"[method posmod], so prefer using that instead.\n"
-"[code]wrapi[/code] is more flexible than using the [method posmod] approach "
-"by giving the user control over the minimum value."
-msgstr ""
-"Wickelt Ganzzahl [code]value[/code] zwischen [code]min[/code] und [code]max[/"
-"code] ein.\n"
-"Verwendbar zur Erzeugung von schleifenähnlichem Verhalten oder unendlichen "
-"Oberflächen.\n"
-"[codeblock]\n"
-"# Endlosschleife zwischen 5 und 9\n"
-"frame = wrapi(frame + 1, 5, 10)\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# Ergebnis ist -2\n"
-"var result = wrapi(-6, -5, -1)\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Wenn [code]min[/code] gleich [code]0[/code], ist dies "
-"äquivalent zu [methode posmod], also verwenden Sie lieber das stattdessen.\n"
-"[code]wrapi[/code] ist flexibler als der [method posmod]-Ansatz, da es dem "
-"Benutzer die Kontrolle über den Mindestwert gibt."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Stops the function execution and returns the current suspended state to the "
-"calling function.\n"
-"From the caller, call [method GDScriptFunctionState.resume] on the state to "
-"resume execution. This invalidates the state. Within the resumed function, "
-"[code]yield()[/code] returns whatever was passed to the [code]resume()[/"
-"code] function call.\n"
-"If passed an object and a signal, the execution is resumed when the object "
-"emits the given signal. In this case, [code]yield()[/code] returns the "
-"argument passed to [code]emit_signal()[/code] if the signal takes only one "
-"argument, or an array containing all the arguments passed to "
-"[code]emit_signal()[/code] if the signal takes multiple arguments.\n"
-"You can also use [code]yield[/code] to wait for a function to finish:\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    yield(countdown(), \"completed\") # waiting for the countdown() function "
-"to complete\n"
-"    print('Ready')\n"
-"\n"
-"func countdown():\n"
-"    yield(get_tree(), \"idle_frame\") # returns a GDScriptFunctionState "
-"object to _ready()\n"
-"    print(3)\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"    print(2)\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"    print(1)\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"\n"
-"# prints:\n"
-"# 3\n"
-"# 2\n"
-"# 1\n"
-"# Ready\n"
-"[/codeblock]\n"
-"When yielding on a function, the [code]completed[/code] signal will be "
-"emitted automatically when the function returns. It can, therefore, be used "
-"as the [code]signal[/code] parameter of the [code]yield[/code] method to "
-"resume.\n"
-"In order to yield on a function, the resulting function should also return a "
-"[code]GDScriptFunctionState[/code]. Notice [code]yield(get_tree(), "
-"\"idle_frame\")[/code] from the above example."
-msgstr ""
-"Stoppt die Ausführung der Funktion und gibt den aktuellen angehaltenen "
-"Zustand an die aufrufende Funktion zurück.\n"
-"Rufe vom Aufrufer [Methode GDScriptFunctionState.resume] von dem Zustand "
-"auf, um die Ausführung wieder aufzunehmen. Dadurch wird der Zustand "
-"ungültig. Innerhalb der wiederaufgenommenen Funktion gibt [code]yield()[/"
-"code] das zurück, was an den Funktionsaufruf [code]resume()[/code] übergeben "
-"wurde.\n"
-"Wenn ein Objekt und ein Signal übergeben werden, wird die Ausführung "
-"fortgesetzt, wenn das Objekt das angegebene Signal aussendet. In diesem Fall "
-"gibt [code]yield()[/code] das an [code]emit_signal()[/code] übergebene "
-"Argument zurück, wenn das Signal nur ein Argument benötigt, oder ein Array "
-"mit allen an [code]emit_signal()[/code] übergebenen Argumenten, wenn das "
-"Signal mehrere Argumente benötigt.\n"
-"[code]yield[/code] kann auch verwendet werden um auf das Ende einer Funktion "
-"zu warten:\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    yield(countdown(), \"completed\") # Warten auf die Beendigung der "
-"Funktion countdown()\n"
-"    print('Fertig')\n"
-"\n"
-"func countdown():\n"
-"    yield(get_tree(), \"idle_frame\") # gibt ein GDScriptFunctionState "
-"Objekt an _ready() zurück\n"
-"    print(3)\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"    print(2)\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"    print(1)\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"\n"
-"# gibt aus:\n"
-"# 3\n"
-"# 2\n"
-"# 1\n"
-"# bereit\n"
-"[/codeblock]\n"
-"Beim Yielding einer Funktion wird das Signal [code]completed[/code] "
-"automatisch ausgegeben, wenn die Funktion zurückkehrt. Es kann daher als "
-"[code]signal[/code] Parameter der [code]yield[/code] Methode verwendet "
-"werden, um fortzufahren.\n"
-"Um eine Funktion zu beenden, sollte die resultierende Funktion auch einen "
-"[code]GDScriptFunctionState[/code] zurückgeben. Beachte "
-"[code]yield(get_tree(), \"idle_frame\")[/code] aus dem obigen Beispiel."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Constant that represents how many times the diameter of a circle fits around "
-"its perimeter. This is equivalent to [code]TAU / 2[/code]."
-msgstr ""
-"Konstante, die beschreibt, wie oft der Durchmesser eines Kreises in seinen "
-"Umfang passt. Dies ist äquivalent zu [code]TAU / 2[/code]."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"The circle constant, the circumference of the unit circle in radians. This "
-"is equivalent to [code]PI * 2[/code], or 360 degrees in rotations."
-msgstr ""
-"Die Kreiskonstante, der Umfang des Einheitskreises im Bogenmaß. Sie ist "
-"äquivalent mit [code]PI * 2[/code], oder einer 360°-Drehung."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"Positive floating-point infinity. This is the result of floating-point "
-"division when the divisor is [code]0.0[/code]. For negative infinity, use "
-"[code]-INF[/code]. Dividing by [code]-0.0[/code] will result in negative "
-"infinity if the numerator is positive, so dividing by [code]0.0[/code] is "
-"not the same as dividing by [code]-0.0[/code] (despite [code]0.0 == -0.0[/"
-"code] returning [code]true[/code]).\n"
-"[b]Note:[/b] Numeric infinity is only a concept with floating-point numbers, "
-"and has no equivalent for integers. Dividing an integer number by [code]0[/"
-"code] will not result in [constant INF] and will result in a run-time error "
-"instead."
-msgstr ""
-"Gleitkomma Darstellung von Unendlich. Diese ist das Ergebnis wenn bei einer "
-"Gleitkomma-Division durch [code]0[/code] geteilt wird. Benutze [code]-INF[/"
-"code] um minus Unendlich zu erhalten. Wird eine positive Gleitkommazahl "
-"durch [code]-0.0[/code] geteilt, so entsteht minus Unendlich. Also ist "
-"teilen durch [code]0.0[/code] nicht das gleiche wie teilen durch [code]-0.0[/"
-"code] (obwohl [code]0.0 == -0.0[/code] [code]true[/code] zurückgibt).\n"
-"[b]Bemerkung:[/b] Numerische Unendlichkeit existiert nur für "
-"gleitkommazahlen, es gibt kein Äquivalent für Ganzzahlen. Wird eine Ganzzahl "
-"durch [code]0[/code] geteilt, so resultiert das nicht in [constant INF], "
-"sondern produziert stattdessen einen Laufzeitfehler."
-
-#: modules/gdscript/doc_classes/@GDScript.xml
-msgid ""
-"\"Not a Number\", an invalid floating-point value. [constant NAN] has "
-"special properties, including that it is not equal to itself ([code]NAN == "
-"NAN[/code] returns [code]false[/code]). It is output by some invalid "
-"operations, such as dividing floating-point [code]0.0[/code] by [code]0.0[/"
-"code].\n"
-"[b]Note:[/b] \"Not a Number\" is only a concept with floating-point numbers, "
-"and has no equivalent for integers. Dividing an integer [code]0[/code] by "
-"[code]0[/code] will not result in [constant NAN] and will result in a run-"
-"time error instead."
-msgstr ""
-"Steht für \"Not a Number\" (\"keine Zahl\"). Der Wert stellt eine nicht "
-"zulässige Kommazahl dar. [constant NAN] hat spezielle EIgenschaften, zum "
-"Beispiel ist der Wert sich selbst nicht glich ([code]NAN==NAN[/code] gibt "
-"[code]false[/code] zurück). [constant NAN] ist die Ausgabe einiger "
-"ungültiger Operationen wie zum Beispiel die Division von [code]0.0[/code] "
-"mit [code]0.0[/code].\n"
-"[b]Hinweis:[/b] \"Not a Number\" ist ein Konzept, dass exklusiv für "
-"Kommazahlen gilt, und kein Gegenstück für Ganzzahlen besitzt. Die Ganzzahl "
-"[code]0[/code] durch [code]0[/code] zu teilen wird nicht [constant NAN] "
-"zurückgeben sondern einen Fehler auslösen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Global scope constants and variables."
-msgstr "Konstanten und Variablen im globalen Anwendungsbereich."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid ""
-"Global scope constants and variables. This is all that resides in the "
-"globals, constants regarding error codes, scancodes, property hints, etc.\n"
-"Singletons are also documented here, since they can be accessed from "
-"anywhere."
-msgstr ""
-"Konstanten und Variablen im globalen Anwendungsbereich. Dabei handelt es "
-"sich um alles was in den Globalen existiert, Konstanten die sich auf "
-"Fehlercodes beziehen, Tastencodes, Hinweise für propertys, etc.\n"
-"Auch Singeltons sind hier dokumentiert, da auf sie von überall zugegriffen "
-"werden kann."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [ARVRServer] singleton."
-msgstr "Das [ARVRServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [AudioServer] singleton."
-msgstr "Das [AudioServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [CameraServer] singleton."
-msgstr "Das [CameraServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [ClassDB] singleton."
-msgstr "Das [ClassDB] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Engine] singleton."
-msgstr "Das [Engine] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Geometry] singleton."
-msgstr "Das [Geometry] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [IP] singleton."
-msgstr "Das [IP] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Input] singleton."
-msgstr "Das [Input] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [InputMap] singleton."
-msgstr "Das [InputMap] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [JSON] singleton."
-msgstr "Das [JSON] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"The [JavaClassWrapper] singleton.\n"
-"[b]Note:[/b] Only implemented on Android."
-msgstr ""
-"Das[JavaClassWrapper] Singleton.\n"
-"[b]Note:[/b] Nur in Android implementiert."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"The [JavaScript] singleton.\n"
-"[b]Note:[/b] Only implemented on HTML5."
-msgstr ""
-"Das [JavaScript] Singleton.\n"
-"[b]Note:[/b] Nur in HTML5 implementiert."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Marshalls] singleton."
-msgstr "Das [Marshalls] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "The [Navigation2DServer] singleton."
-msgstr "Das [TranslationServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "The [NavigationMeshGenerator] singleton."
-msgstr "Das [EditorNavigationMeshGenerator] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "The [NavigationServer] singleton."
-msgstr "Das [TranslationServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [OS] singleton."
-msgstr "Das [OS] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Performance] singleton."
-msgstr "Das [Performance] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Physics2DServer] singleton."
-msgstr "Das [Physics2DServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [PhysicsServer] singleton."
-msgstr "Das [PhysicsServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [ProjectSettings] singleton."
-msgstr "Das [ProjectSettings] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [ResourceLoader] singleton."
-msgstr "Das [ResourceLoader] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [ResourceSaver] singleton."
-msgstr "Das [ResourceSaver] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [Time] singleton."
-msgstr "Das [Time] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [TranslationServer] singleton."
-msgstr "Das [TranslationServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [VisualScriptEditor] singleton."
-msgstr "Das [VisualScriptEditor] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The [VisualServer] singleton."
-msgstr "Das [VisualServer] Singleton."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left margin, usually used for [Control] or [StyleBox]-derived classes."
-msgstr ""
-"Linker Abstand, normalerweise benutzt für von [Control] oder [StyleBox]-"
-"abgeleiteten Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Top margin, usually used for [Control] or [StyleBox]-derived classes."
-msgstr ""
-"Oberer Abstand, normalerweise benutzt für von [Control] oder [StyleBox]-"
-"abgeleiteten Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right margin, usually used for [Control] or [StyleBox]-derived classes."
-msgstr ""
-"Rechter Abstand, normalerweise benutzt für von [Control] oder [StyleBox]-"
-"abgeleiteten Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Bottom margin, usually used for [Control] or [StyleBox]-derived classes."
-msgstr ""
-"Unterer Abstand, normalerweise benutzt für von [Control] oder [StyleBox]-"
-"abgeleiteten Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Top-left corner."
-msgstr "Obere linke Ecke."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Top-right corner."
-msgstr "Obere rechte Ecke."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bottom-right corner."
-msgstr "Untere rechte Ecke."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bottom-left corner."
-msgstr "Untere linke Ecke."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"General vertical alignment, usually used for [Separator], [ScrollBar], "
-"[Slider], etc."
-msgstr ""
-"Generelle vertikale Ausrichtung, normalerweise benutzt für [Separator], "
-"[ScrollBar], [Slider], etc."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"General horizontal alignment, usually used for [Separator], [ScrollBar], "
-"[Slider], etc."
-msgstr ""
-"Generelle horizontale Ausrichtung, normalerweise benutzt für [Separator], "
-"[ScrollBar], [Slider], etc."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Horizontal left alignment, usually for text-derived classes."
-msgstr ""
-"Linke horizontale Ausrichtung, normalerweise benutzt für von Text "
-"abgeleitete Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Horizontal center alignment, usually for text-derived classes."
-msgstr ""
-"Zentrierte horizontale Ausrichtung, normalerweise benutzt für von Text "
-"abgeleitete Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Horizontal right alignment, usually for text-derived classes."
-msgstr ""
-"Rechte horizontale Ausrichtung, normalerweise benutzt für von Text "
-"abgeleitete Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Vertical top alignment, usually for text-derived classes."
-msgstr ""
-"Obere vertikale Ausrichtung, normalerweise benutzt für von Text abgeleitete "
-"Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Vertical center alignment, usually for text-derived classes."
-msgstr ""
-"Zentrierte vertikale Ausrichtung, normalerweise benutzt für von Text "
-"abgeleitete Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Vertical bottom alignment, usually for text-derived classes."
-msgstr ""
-"Untere vertikale Ausrichtung, normalerweise benutzt für von Text abgeleitete "
-"Klassen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Scancodes with this bit applied are non-printable."
-msgstr ""
-"Tastencodes, für die dieses Bit gesetzt ist, können nicht in der Konsole "
-"ausgegeben werden."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Escape key."
-msgstr "Escape Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Tab key."
-msgstr "Tabulator Taste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Shift+Tab key."
-msgstr "Shift + Tabulator Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Backspace key."
-msgstr "Backspace Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Return key (on the main keyboard)."
-msgstr "Eingabe Taste (auf dem Hauptblock)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Enter key on the numeric keypad."
-msgstr "Enter Taste (auf dem Ziffernblock)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Insert key."
-msgstr "Einfügen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Delete key."
-msgstr "Löschen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Pause key."
-msgstr "Pause/Unterbrechen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Print Screen key."
-msgstr "Drucken Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "System Request key."
-msgstr "Systemabfrage Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Clear key."
-msgstr "Entfernen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Home key."
-msgstr "Pos1 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "End key."
-msgstr "Ende Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left arrow key."
-msgstr "Linke Pfeiltaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Up arrow key."
-msgstr "obere Pfeiltaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right arrow key."
-msgstr "rechte Pfeiltaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Down arrow key."
-msgstr "untere Pfeiltaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Page Up key."
-msgstr "Bild hoch Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Page Down key."
-msgstr "Bild runter Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Shift key."
-msgstr "Shift Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Control key."
-msgstr "Control Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Meta key."
-msgstr "Meta Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Alt key."
-msgstr "Alt Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Caps Lock key."
-msgstr "Feststelltaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Num Lock key."
-msgstr "Num Lock Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Scroll Lock key."
-msgstr "Rollen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F1 key."
-msgstr "F1 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F2 key."
-msgstr "F2 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F3 key."
-msgstr "F3 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F4 key."
-msgstr "F4 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F5 key."
-msgstr "F5 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F6 key."
-msgstr "F6 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F7 key."
-msgstr "F7 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F8 key."
-msgstr "F8 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F9 key."
-msgstr "F9 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F10 key."
-msgstr "F10 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F11 key."
-msgstr "F11 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F12 key."
-msgstr "F12 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F13 key."
-msgstr "F13 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F14 key."
-msgstr "F14 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F15 key."
-msgstr "F15 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F16 key."
-msgstr "F16 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Multiply (*) key on the numeric keypad."
-msgstr "Multiplikations (*) Taste auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Divide (/) key on the numeric keypad."
-msgstr "Divisions (/) Taste auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Subtract (-) key on the numeric keypad."
-msgstr "Subtraktions (-) Taste auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Period (.) key on the numeric keypad."
-msgstr "Komma (,) Taste auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Add (+) key on the numeric keypad."
-msgstr "Additions (+) Taste auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 0 on the numeric keypad."
-msgstr "Zahl 0 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 1 on the numeric keypad."
-msgstr "Zahl 1 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 2 on the numeric keypad."
-msgstr "Zahl 2 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 3 on the numeric keypad."
-msgstr "Zahl 3 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 4 on the numeric keypad."
-msgstr "Zahl 4 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 5 on the numeric keypad."
-msgstr "Zahl 5 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 6 on the numeric keypad."
-msgstr "Zahl 6 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 7 on the numeric keypad."
-msgstr "Zahl 7 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 8 on the numeric keypad."
-msgstr "Zahl 8 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 9 on the numeric keypad."
-msgstr "Zahl 9 auf dem Ziffernblock."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left Super key (Windows key)."
-msgstr "Linke Super Taste (Windows Taste)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right Super key (Windows key)."
-msgstr "Rechte Super-Taste (Windows Taste)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Context menu key."
-msgstr "Menü Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left Hyper key."
-msgstr "Linke Hyper Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right Hyper key."
-msgstr "Rechte Hyper Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Help key."
-msgstr "Hilfe Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left Direction key."
-msgstr "Linke Richtungs-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right Direction key."
-msgstr "Rechte Richtungs-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Media back key. Not to be confused with the Back button on an Android device."
-msgstr ""
-"Media back Taste. Nicht zu verwechseln mit der Zurück-Taste auf einem "
-"Android-Gerät."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Media forward key."
-msgstr "Medien-Vorwärts-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Media stop key."
-msgstr "Medium stoppen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Media refresh key."
-msgstr "Medien-Neuladen-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Volume down key."
-msgstr "Lautstärke-runter Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Mute volume key."
-msgstr "Stummschalten Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Volume up key."
-msgstr "Lauter-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bass Boost key."
-msgstr "Bass-Verstärker Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bass up key."
-msgstr "Bass-Erhöhen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bass down key."
-msgstr "Bass abwärts Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Treble up key."
-msgstr "Taste für Höhenanhebung."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Treble down key."
-msgstr "Höhe runter Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Media play key."
-msgstr "\"Medium abspielen\"-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Previous song key."
-msgstr "Vorheriger Song Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Next song key."
-msgstr "Nächster Song Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Media record key."
-msgstr "Medium aufnehmen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Home page key."
-msgstr "Hauptseiten Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Favorites key."
-msgstr "Favoriten Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Search key."
-msgstr "Suchen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Standby key."
-msgstr "Standby TAste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Open URL / Launch Browser key."
-msgstr "Öffne URL / Starte Browser Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Mail key."
-msgstr "Starte E-Mail Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Media key."
-msgstr "Starte-Medien Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 0 key."
-msgstr "Starte Verknüpfung 0 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 1 key."
-msgstr "Starte Verknüpfung 1 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 2 key."
-msgstr "Starte Verknüpfung 2 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 3 key."
-msgstr "Starte Verknüpfung 3 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 4 key."
-msgstr "Starte Verknüpfung 4 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 5 key."
-msgstr "Starte Verknüpfung 5 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 6 key."
-msgstr "Starte Verknüpfung 6 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 7 key."
-msgstr "Starte Verknüpfung 7 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 8 key."
-msgstr "Starte Verknüpfung 8 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut 9 key."
-msgstr "Starte Verknüpfung 9 Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut A key."
-msgstr "Starte Verknüpfung A Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut B key."
-msgstr "Starte Verknüpfung B Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut C key."
-msgstr "Starte Verknüpfung C Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut D key."
-msgstr "Starte Verknüpfung D Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut E key."
-msgstr "Starte Verknüpfung E Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Launch Shortcut F key."
-msgstr "Starte Verknüpfung F Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Unknown key."
-msgstr "Unbekannte Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Space key."
-msgstr "Leertaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "! key."
-msgstr "! Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "\" key."
-msgstr "\" Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "# key."
-msgstr "# Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "$ key."
-msgstr "$ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "% key."
-msgstr "% Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "& key."
-msgstr "& Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "' key."
-msgstr "' Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "( key."
-msgstr "( Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid ") key."
-msgstr ") Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "* key."
-msgstr "* Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "+ key."
-msgstr "+ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid ", key."
-msgstr ", Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "- key."
-msgstr "- Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid ". key."
-msgstr ". Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "/ key."
-msgstr "/ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 0."
-msgstr "Nummer 0."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 1."
-msgstr "Nummer 1."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 2."
-msgstr "Nummer 2."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 3."
-msgstr "Nummer 3."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 4."
-msgstr "Nummer 4."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 5."
-msgstr "Nummer 5."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 6."
-msgstr "Nummer 6."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 7."
-msgstr "Nummer 7."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 8."
-msgstr "Nummer 8."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Number 9."
-msgstr "Nummer 9."
-
-#: doc/classes/@GlobalScope.xml
-msgid ": key."
-msgstr ": Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "; key."
-msgstr "; Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "< key."
-msgstr "< Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "= key."
-msgstr "= Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "> key."
-msgstr "> Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "? key."
-msgstr "? Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "@ key."
-msgstr "@ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "A key."
-msgstr "A Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "B key."
-msgstr "B Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "C key."
-msgstr "C Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "D key."
-msgstr "D Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "E key."
-msgstr "E Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "F key."
-msgstr "F Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "G key."
-msgstr "G Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "H key."
-msgstr "H Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "I key."
-msgstr "I Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "J key."
-msgstr "J Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "K key."
-msgstr "K Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "L key."
-msgstr "L Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "M key."
-msgstr "M Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "N key."
-msgstr "N Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "O key."
-msgstr "O Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "P key."
-msgstr "P Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Q key."
-msgstr "Q Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "R key."
-msgstr "R Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "S key."
-msgstr "S Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "T key."
-msgstr "T Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "U key."
-msgstr "U Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "V key."
-msgstr "V Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "W key."
-msgstr "W Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "X key."
-msgstr "X Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Y key."
-msgstr "Y Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Z key."
-msgstr "Z Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "[ key."
-msgstr "[ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "\\ key."
-msgstr "\\ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "] key."
-msgstr "] Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "^ key."
-msgstr "^ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "_ key."
-msgstr "_ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "` key."
-msgstr "` Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "{ key."
-msgstr "{ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "| key."
-msgstr "| Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "} key."
-msgstr "} Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "~ key."
-msgstr "~ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Non-breakable space key."
-msgstr "Geschütztes Leerzeichen Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¡ key."
-msgstr "¡ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¢ key."
-msgstr "¢ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "£ key."
-msgstr "£ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¤ key."
-msgstr "¤ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¥ key."
-msgstr "¥ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¦ key."
-msgstr "¦ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "§ key."
-msgstr "§ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¨ key."
-msgstr "¨ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "© key."
-msgstr "© Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "ª key."
-msgstr "ª Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "« key."
-msgstr "« Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¬ key."
-msgstr "¬ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Soft hyphen key."
-msgstr "Bedingter Trennstrich Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "® key."
-msgstr "® Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¯ key."
-msgstr "¯ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "° key."
-msgstr "° Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "± key."
-msgstr "± Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "² key."
-msgstr "² Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "³ key."
-msgstr "³ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "´ key."
-msgstr "´ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "µ key."
-msgstr "µ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¶ key."
-msgstr "¶ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "· key."
-msgstr "· Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¸ key."
-msgstr "¸ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¹ key."
-msgstr "¹ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "º key."
-msgstr "º Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "» key."
-msgstr "» Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¼ key."
-msgstr "¼ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "½ key."
-msgstr "½ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¾ key."
-msgstr "¾ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "¿ key."
-msgstr "¿ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "À key."
-msgstr "À Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Á key."
-msgstr "Á Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Â key."
-msgstr "Â Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ã key."
-msgstr "Ã Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ä key."
-msgstr "Ä Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Å key."
-msgstr "Å Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Æ key."
-msgstr "Æ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ç key."
-msgstr "Ç Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "È key."
-msgstr "È Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "É key."
-msgstr "É Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ê key."
-msgstr "Ê Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ë key."
-msgstr "Ë Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ì key."
-msgstr "Ì Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Í key."
-msgstr "Í Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Î key."
-msgstr "Î Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ï key."
-msgstr "Ï Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ð key."
-msgstr "Ð Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ñ key."
-msgstr "Ñ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ò key."
-msgstr "Ò Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ó key."
-msgstr "Ó Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ô key."
-msgstr "Ô Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Õ key."
-msgstr "Õ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ö key."
-msgstr "Ö Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "× key."
-msgstr "× Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ø key."
-msgstr "Ø Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ù key."
-msgstr "Ù Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ú key."
-msgstr "Ú Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Û key."
-msgstr "Û Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ü key."
-msgstr "Ü Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ý key."
-msgstr "Ý Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Þ key."
-msgstr "Þ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "ß key."
-msgstr "ß Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "÷ key."
-msgstr "÷ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "ÿ key."
-msgstr "ÿ Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Key Code mask."
-msgstr "Taste Code-Maske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Modifier key mask."
-msgstr "Modifikatorschlüsselmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Shift key mask."
-msgstr "Shift-Tastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Alt key mask."
-msgstr "Alt-Tastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Meta key mask."
-msgstr "Meta-Tastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Ctrl key mask."
-msgstr "Strg-Tastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Command key mask. On macOS, this is equivalent to [constant KEY_MASK_META]. "
-"On other platforms, this is equivalent to [constant KEY_MASK_CTRL]. This "
-"mask should be preferred to [constant KEY_MASK_META] or [constant "
-"KEY_MASK_CTRL] for system shortcuts as it handles all platforms correctly."
-msgstr ""
-"Befehlstastenmaske. Unter macOS entspricht dies [constant KEY_MASK_META]. "
-"Auf anderen Plattformen ist dies äquivalent zu [constant KEY_MASK_CTRL]. "
-"Diese Maske sollte [constant KEY_MASK_META] oder [constant KEY_MASK_CTRL] "
-"für Systemkurzbefehle vorgezogen werden, da sie alle Plattformen korrekt "
-"behandelt."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Keypad key mask."
-msgstr "Tastatur-Tastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Group Switch key mask."
-msgstr "Gruppenschalter-Tastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left mouse button."
-msgstr "Linke Maustaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right mouse button."
-msgstr "Rechte Maustaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Middle mouse button."
-msgstr "Mittlere Maustaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Extra mouse button 1 (only present on some mice)."
-msgstr "Maus Zusatztaste 1 (nur auf einigen Mäusen vorhanden)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Extra mouse button 2 (only present on some mice)."
-msgstr "Maus Zusatztaste 2 (nur auf einigen Mäusen vorhanden)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Mouse wheel up."
-msgstr "Mausrad hoch."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Mouse wheel down."
-msgstr "Mausrad runter."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Mouse wheel left button (only present on some mice)."
-msgstr "Mausrad linke Taste (nur auf einigen Mäusen vorhanden)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Mouse wheel right button (only present on some mice)."
-msgstr "Mausrad rechte Taste (nur auf einigen Mäusen vorhanden)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left mouse button mask."
-msgstr "Linke Maustastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right mouse button mask."
-msgstr "Rechte Maustastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Middle mouse button mask."
-msgstr "Mittlere Maustastenmaske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Extra mouse button 1 mask."
-msgstr "Extra Maustaste 1 Maske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Extra mouse button 2 mask."
-msgstr "Extra Maustaste 2 Maske."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Invalid button or axis."
-msgstr "Ungültiger Knopf oder ungültige Achse."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 0."
-msgstr "Gamepad-Taste 0."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 1."
-msgstr "Gamepad Taste 1."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 2."
-msgstr "Gamepad Taste 2."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 3."
-msgstr "Gamepad-Taste 3."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 4."
-msgstr "Gamepad-Taste 4."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 5."
-msgstr "Gamepad-Taste 5."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 6."
-msgstr "Gamepad-Taste 6."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 7."
-msgstr "Gamepad-Taste 7."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 8."
-msgstr "Gamepad-Taste 8."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 9."
-msgstr "Gamepad-Taste 9."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 10."
-msgstr "Gamepad-Taste 10."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 11."
-msgstr "Gamepad-Taste 11."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 12."
-msgstr "Gamepad-Taste 12."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 13."
-msgstr "Gamepad-Taste 13."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 14."
-msgstr "Gamepad-Taste 14."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 15."
-msgstr "Gamepad-Taste 15."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 16."
-msgstr "Gamepad-Taste 16."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 17."
-msgstr "Gamepad-Taste 17."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 18."
-msgstr "Gamepad-Taste 18."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 19."
-msgstr "Gamepad-Taste 19."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 20."
-msgstr "Gamepad-Taste 20."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 21."
-msgstr "Gamepad-Taste 21."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button 22."
-msgstr "Gamepad-Taste 22."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"The maximum number of game controller buttons supported by the engine. The "
-"actual limit may be lower on specific platforms:\n"
-"- Android: Up to 36 buttons.\n"
-"- Linux: Up to 80 buttons.\n"
-"- Windows and macOS: Up to 128 buttons."
-msgstr ""
-"Die maximale Anzahl an Spielcontroller-Tasten, die unterstützt werden. Das "
-"eigentliche Limit kann bei bestimmten Plattformen geringer sein:\n"
-"- Android: Bis zu 36 Tasten.\n"
-"- Linux: Bis zu 80 Tasten.\n"
-"- Windows und macOS: Bis zu 128 Tasten."
-
-#: doc/classes/@GlobalScope.xml
-msgid "DualShock circle button."
-msgstr "DualShock-Kreis-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "DualShock X button."
-msgstr "DualShock-X-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "DualShock square button."
-msgstr "DualShock-Quadrat-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "DualShock triangle button."
-msgstr "DualShock-Dreieck-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Xbox controller B button."
-msgstr "XBox-Controller B-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Xbox controller A button."
-msgstr "XBox-Controller A-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Xbox controller X button."
-msgstr "XBox-Controller X-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Xbox controller Y button."
-msgstr "XBox-Controller Y-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Nintendo controller A button."
-msgstr "Nintendo-Controller A-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Nintendo controller B button."
-msgstr "Nintendo-Controller B-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Nintendo controller X button."
-msgstr "Nintendo-Controller X-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Nintendo controller Y button."
-msgstr "Nintendo-Controller Y-Taste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Grip (side) buttons on a VR controller."
-msgstr "Grip-Knopf(Seite) an einem VR-Controller"
-
-#: doc/classes/@GlobalScope.xml
-msgid "Push down on the touchpad or main joystick on a VR controller."
-msgstr ""
-"Drücke auf das Touchpad oder den Haupt-Joystick auf einem VR-Controller."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Trigger on a VR controller."
-msgstr "Trigger-Taste eines VR Controllers."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"A button on the right Oculus Touch controller, X button on the left "
-"controller (also when used in OpenVR)."
-msgstr ""
-"A-Taste auf dem rechten Oculus Touch Controller, X-Taste auf dem linken "
-"Controller (auch bei Verwendung in OpenVR)."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"B button on the right Oculus Touch controller, Y button on the left "
-"controller (also when used in OpenVR)."
-msgstr ""
-"B-Taste auf dem rechten Oculus Touch Controller, Y-Taste auf dem linken "
-"Controller (auch bei Verwendung in OpenVR)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Menu button on either Oculus Touch controller."
-msgstr "Menütaste auf einem der beiden Oculus Touch Controller."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Menu button in OpenVR (Except when Oculus Touch controllers are used)."
-msgstr ""
-"Menütaste in OpenVR (außer wenn Oculus Touch Controller verwendet werden)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button Select."
-msgstr "Gamepad-Taste Auswählen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad button Start."
-msgstr "Gamepad-Taste Start."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad DPad up."
-msgstr "Gamepad DPad oben."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad DPad down."
-msgstr "Gamepad DPad unten."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad DPad left."
-msgstr "Gamepad DPad links."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad DPad right."
-msgstr "Gamepad DPad rechts."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad SDL guide button."
-msgstr "Spiel-Controller SDL-Führungstaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad SDL miscellaneous button."
-msgstr "Controller SDL Sonstiges-Taste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad SDL paddle 1 button."
-msgstr "Game Controller SDL D-Pad linke Taste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad SDL paddle 2 button."
-msgstr "Game Controller SDL D-Pad linke Taste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad SDL paddle 3 button."
-msgstr "Game Controller SDL D-Pad linke Taste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad SDL paddle 4 button."
-msgstr "Game Controller SDL D-Pad linke Taste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad SDL touchpad button."
-msgstr "Game-Controller SDL D-Pad Taste nach oben."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad left Shoulder button."
-msgstr "Game-Controller SDL linke Schultertaste."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad left trigger."
-msgstr "Gamecontroller linke Triggerachse."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad left stick click."
-msgstr "Klick auf den linken Analog-Stick auf einem Gamepad."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad right Shoulder button."
-msgstr "Game-Controller SDL rechte Schultertaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad right trigger."
-msgstr "Gamecontroller rechte Trigger-Achse."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad right stick click."
-msgstr "Klick auf den rechten Analog Stick eines Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad left stick horizontal axis."
-msgstr "Horizontale Achse auf dem linken Stick des Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad left stick vertical axis."
-msgstr "Game Controller linker Joystick x-Achse."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad right stick horizontal axis."
-msgstr "Horizontale Achse auf dem rechten Stick des Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad right stick vertical axis."
-msgstr "Game Controller rechter Joystick x-Achse."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Generic gamepad axis 4."
-msgstr "Achse 4 eines gewöhnlichen Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Generic gamepad axis 5."
-msgstr "Achse 5 eines gewöhnlichen Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad left trigger analog axis."
-msgstr "Gamecontroller linke Triggerachse."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Gamepad right trigger analog axis."
-msgstr "Gamecontroller rechte Trigger-Achse."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Generic gamepad axis 8."
-msgstr "Achse 8 eines gewöhnlichen Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Generic gamepad axis 9."
-msgstr "Achse 9 eines gewöhnlichen Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Represents the maximum number of joystick axes supported."
-msgstr "Stellt die maximale Anzahl der unterstützten Joystick-Achsen dar."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad left analog trigger."
-msgstr "Linker analoger Trigger des Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Gamepad right analog trigger."
-msgstr "Rechter analoger Trigger des Gamepads."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "VR Controller analog trigger."
-msgstr "Gamecontroller linke Triggerachse."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "VR Controller analog grip (side buttons)."
-msgstr "Spiel-Controller SDL-Führungstaste."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"OpenVR touchpad X axis (Joystick axis on Oculus Touch and Windows MR "
-"controllers)."
-msgstr ""
-"OpenVR-Touchpad X-Achse (Joystick-Achse bei Oculus Touch und Windows MR-"
-"Controllern)."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"OpenVR touchpad Y axis (Joystick axis on Oculus Touch and Windows MR "
-"controllers)."
-msgstr ""
-"OpenVR-Touchpad Y-Achse (Joystick-Achse bei Oculus Touch und Windows MR-"
-"Controllern)."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI note OFF message. See the documentation of [InputEventMIDI] for "
-"information of how to use MIDI inputs."
-msgstr ""
-"MIDI Note AUS Nachricht. Für mehr Informationen, siehe [InputEvendMIDI]."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI note ON message. See the documentation of [InputEventMIDI] for "
-"information of how to use MIDI inputs."
-msgstr ""
-"MIDI Noten ON Mitteilung. Weitere Informationen, wie MIDI Eingaben verwendet "
-"werden, können der Dokumentation von [InputEventMIDI] entnommen werden."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI aftertouch message. This message is most often sent by pressing down on "
-"the key after it \"bottoms out\"."
-msgstr ""
-"MIDI-Aftertouch-Meldung. Diese Meldung wird meistens durch Drücken der Taste "
-"nachdem sie den Tiefpunkt erreicht hat gesendet."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI control change message. This message is sent when a controller value "
-"changes. Controllers include devices such as pedals and levers."
-msgstr ""
-"Änderungsmitteilung für eine MIDI-Steuerungseinheit. Diese Mitteilung wird "
-"gesendet, sollte sich der Wert einer Steuerungseinheit ändern. "
-"Steuerungseinheiten sind zum Beispiel Pedale und Schalter."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI program change message. This message sent when the program patch number "
-"changes."
-msgstr ""
-"MIDI-Programmwechselmeldung. Diese Meldung wird gesendet, wenn sich die "
-"Programm-Patch-Nummer ändert."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI channel pressure message. This message is most often sent by pressing "
-"down on the key after it \"bottoms out\". This message is different from "
-"polyphonic after-touch as it indicates the highest pressure across all keys."
-msgstr ""
-"MIDI-Kanal-Druckmeldung. Diese Meldung wird meistens durch Drücken der Taste "
-"nachdem sie den Tiefpunkt erreicht hat gesendet.Diese Meldung unterscheidet "
-"sich von der polyphonen Aftertouch-Meldung, da sie den höchsten Druck über "
-"alle Tasten hinweg anzeigt."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI pitch bend message. This message is sent to indicate a change in the "
-"pitch bender (wheel or lever, typically)."
-msgstr ""
-"MIDI-Pitch-Bend-Meldung. Diese Meldung wird gesendet, um eine Änderung des "
-"Pitch-Benders (typischerweise Rad oder Hebel) anzuzeigen."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI system exclusive message. This has behavior exclusive to the device "
-"you're receiving input from. Getting this data is not implemented in Godot."
-msgstr ""
-"MIDI-System-exklusive Nachricht. Dieses Verhalten gilt nur für das Gerät, "
-"von dem Sie Eingaben empfangen. Das Abrufen dieser Daten ist in Godot nicht "
-"implementiert."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI quarter frame message. Contains timing information that is used to "
-"synchronize MIDI devices. Getting this data is not implemented in Godot."
-msgstr ""
-"MIDI-Viertel-Frame-Meldung. Enthält Zeitinformationen, die zur "
-"Synchronisierung von MIDI-Geräten verwendet werden. Das Abrufen dieser Daten "
-"ist in Godot nicht implementiert."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI song position pointer message. Gives the number of 16th notes since the "
-"start of the song. Getting this data is not implemented in Godot."
-msgstr ""
-"MIDI-Songpositionszeiger-Meldung. Gibt die Anzahl der 16tel-Noten seit "
-"Beginn des Liedes an. Das Abrufen dieser Daten ist in Godot nicht "
-"implementiert."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI song select message. Specifies which sequence or song is to be played. "
-"Getting this data is not implemented in Godot."
-msgstr ""
-"MIDI Mitteilung für Songauswahl. Legt fest, welche Musik-Sequenz oder "
-"welcher Song abgespielt werden soll. Das Abrufen dieser Daten ist nicht in "
-"Godot implementiert."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI tune request message. Upon receiving a tune request, all analog "
-"synthesizers should tune their oscillators."
-msgstr ""
-"MIDI Tune Request Nachricht. Beim Empfang einer Tune-Anforderung sollten "
-"alle analogen Synthesizer ihre Oszillatoren stimmen."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI timing clock message. Sent 24 times per quarter note when "
-"synchronization is required."
-msgstr ""
-"MIDI Mitteilung zum Uhr-Timing. Diese Mitteilung wird 24 Mal pro Viertelnote "
-"gesendet, sollte eine Synchronisation erforderlich sein."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI start message. Start the current sequence playing. This message will be "
-"followed with Timing Clocks."
-msgstr ""
-"MIDI Start-Mitteilung. Startet die Wiedergabe der aktuellen Sequenz. Dieser "
-"Mitteilung folgen die Uhr-Timings."
-
-#: doc/classes/@GlobalScope.xml
-msgid "MIDI continue message. Continue at the point the sequence was stopped."
-msgstr ""
-"MIDI Wiederaufnahme-Mitteilung. Die Wiedergabe der Sequenz wird an dem Punkt "
-"fortgesetzt, an dem die Wiedergabe gestoppt wurde."
-
-#: doc/classes/@GlobalScope.xml
-msgid "MIDI stop message. Stop the current sequence."
-msgstr "MIDI Stop-Mitteilung. Stoppt die Wiedergabe der aktuellen Sequenz."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI active sensing message. This message is intended to be sent repeatedly "
-"to tell the receiver that a connection is alive."
-msgstr ""
-"MIDI active sensing message. Diese Meldung soll wiederholt gesendet werden, "
-"um dem Empfänger mitzuteilen, dass eine Verbindung besteht."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"MIDI system reset message. Reset all receivers in the system to power-up "
-"status. It should not be sent on power-up itself."
-msgstr ""
-"MIDI System-Reset Mitteilung. Reset aller Empfänger im System in den "
-"Hochfahren-Status. Diese Mitteilung sollte nicht zum Starten der Empfänger "
-"selbst genutzt werden."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Methods that return [enum Error] return [constant OK] when no error "
-"occurred. Note that many functions don't return an error code but will print "
-"error messages to standard output.\n"
-"Since [constant OK] has value 0, and all other failure codes are positive "
-"integers, it can also be used in boolean checks, e.g.:\n"
-"[codeblock]\n"
-"var err = method_that_returns_error()\n"
-"if err != OK:\n"
-"    print(\"Failure!\")\n"
-"# Or, equivalent:\n"
-"if err:\n"
-"    print(\"Still failing!\")\n"
-"[/codeblock]"
-msgstr ""
-"Methoden, die [enum Error] zurückgeben, geben [constant OK] zurück, wenn "
-"kein Fehler aufgetreten ist. Beachten Sie, dass viele Funktionen keinen "
-"Fehlercode zurückgeben, sondern Fehlermeldungen auf der Standardausgabe "
-"ausgeben.\n"
-"Da [constant OK] den Wert 0 hat und alle anderen Fehlercodes positive "
-"Ganzzahlen sind, kann sie auch in booleschen Prüfungen verwendet werden, z. "
-"B.:\n"
-"[codeblock]\n"
-"var err = method_that_returns_error()\n"
-"if err != OK:\n"
-"    print(\"Failure!\")\n"
-"# Oder, äquivalent:\n"
-"if err:\n"
-"    print(\"Immer noch fehlgeschlagen!\")\n"
-"[/codeblock]"
-
-#: doc/classes/@GlobalScope.xml
-msgid "Generic error."
-msgstr "Allgemeiner Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Unavailable error."
-msgstr "nicht vorhanden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Unconfigured error."
-msgstr "nicht konfiguriert Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Unauthorized error."
-msgstr "nicht autorisiert Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Parameter range error."
-msgstr "Parameterbereichsfehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Out of memory (OOM) error."
-msgstr "Out of memory (OOM)-Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Not found error."
-msgstr "Datei: Nicht gefunden - Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Bad drive error."
-msgstr "Datei: Fehlerhaftes Laufwerk - Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Bad path error."
-msgstr "Datei: Fehler im Pfad."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: No permission error."
-msgstr "Datei: Keine Berechtigung - Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Already in use error."
-msgstr "Datei: Bereits in Verwendung Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Can't open error."
-msgstr "Datei: Kann nicht geöffnet werden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Can't write error."
-msgstr "Datei: Kann nicht schreiben Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Can't read error."
-msgstr "Datei: Kann nicht lesen Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Unrecognized error."
-msgstr "Datei: Unbekannter Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Corrupt error."
-msgstr "Datei: Beschädigt Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: Missing dependencies error."
-msgstr "Datei: Fehlende Abhängigkeiten Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "File: End of file (EOF) error."
-msgstr "Datei: Dateiende (EOF) Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Can't open error."
-msgstr "Kann nicht geöffnet werden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Can't create error."
-msgstr "Kann nicht erstellt werden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Query failed error."
-msgstr "Abfrage fehlgeschlagen Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Already in use error."
-msgstr "Bereits in Gebrauch Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Locked error."
-msgstr "geblockt Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Timeout error."
-msgstr "Timeout Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Can't connect error."
-msgstr "Fehler: Kann keine Verbindung herstellen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Can't resolve error."
-msgstr "Kann nicht behoben werden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Connection error."
-msgstr "Verbindungs-Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Can't acquire resource error."
-msgstr "Kann keine Ressource erfassen Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Can't fork process error."
-msgstr "Kann nicht Prozess erben Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Invalid data error."
-msgstr "Fehler aufgrund ungültiger Daten."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Invalid parameter error."
-msgstr "Fehler aufgrund ungültiger Parameter."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Already exists error."
-msgstr "Bereits vorhanden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Does not exist error."
-msgstr "Existiert nicht Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Database: Read error."
-msgstr "Datenbank: Lesefehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Database: Write error."
-msgstr "Datenbank: Schreibfehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Compilation failed error."
-msgstr "Fehler bei der Kompilierung."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Method not found error."
-msgstr "Methode nicht gefunden Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Linking failed error."
-msgstr "Verknüpfen fehlgeschlagen Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Script failed error."
-msgstr "Skript fehlgeschlagen Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Cycling link (import cycle) error."
-msgstr "Cycling Link (Importzyklus) Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Invalid declaration error."
-msgstr "Ungültige Deklaration Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Duplicate symbol error."
-msgstr "Doppeltes Symbol Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Parse error."
-msgstr "Übersetzungs-Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Busy error."
-msgstr "besetzt (busy) Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Skip error."
-msgstr "Fehler überspringen."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Help error."
-msgstr "Hilfe Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bug error."
-msgstr "Bug Fehler."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Printer on fire error. (This is an easter egg, no engine methods return this "
-"error code.)"
-msgstr ""
-"Drucker brennt Fehler. (Dies ist ein Easteregg, keine Enginemethoden geben "
-"diesen Fehlercode zurück.)"
-
-#: doc/classes/@GlobalScope.xml
-msgid "No hint for the edited property."
-msgstr "Kein Hinweis auf die bearbeitete Eigenschaft."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer or float property should be within a range specified "
-"via the hint string [code]\"min,max\"[/code] or [code]\"min,max,step\"[/"
-"code]. The hint string can optionally include [code]\"or_greater\"[/code] "
-"and/or [code]\"or_lesser\"[/code] to allow manual input going respectively "
-"above the max or below the min values. Example: [code]\"-360,360,1,"
-"or_greater,or_lesser\"[/code]."
-msgstr ""
-"Weist darauf hin, dass eine Integer- oder Float-Eigenschaft innerhalb eines "
-"Bereichs liegen sollte, der mit der Hinweiszeichenkette [code]\"min,max\"[/"
-"code] oder [code]\"min,max,step\"[/code] angegeben wird. Die "
-"Hinweiszeichenkette kann optional [code]\"or_greater\"[/code] und/oder "
-"[code]\"or_lesser\"[/code] enthalten, um eine manuelle Eingabe oberhalb der "
-"Höchst- bzw. unterhalb der Mindestwerte zu ermöglichen. Beispiel: "
-"[code]\"-360,360,1,or_greater,or_lesser\"[/code]."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a float property should be within an exponential range specified "
-"via the hint string [code]\"min,max\"[/code] or [code]\"min,max,step\"[/"
-"code]. The hint string can optionally include [code]\"or_greater\"[/code] "
-"and/or [code]\"or_lesser\"[/code] to allow manual input going respectively "
-"above the max or below the min values. Example: [code]\"0.01,100,0.01,"
-"or_greater\"[/code]."
-msgstr ""
-"Weist darauf hin, dass eine Float-Eigenschaft innerhalb eines exponentiellen "
-"Bereichs liegen sollte, der durch die Hinweiszeichenkette [code]\"min,max\"[/"
-"code] oder [code]\"min,max,step\"[/code] festgelegt wird. Die "
-"Hinweiszeichenkettekann optional [code]\"or_greater\"[/code] und/oder "
-"[code]\"or_lesser\"[/code] enthalten, um eine manuelle Eingabe oberhalb der "
-"Maximal- bzw. unterhalb der Minimalwerte zu ermöglichen. Beispiel: "
-"[code]\"0.01,100,0.01,or_greater\"[/code]."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer, float or string property is an enumerated value to "
-"pick in a list specified via a hint string.\n"
-"The hint string is a comma separated list of names such as [code]\"Hello,"
-"Something,Else\"[/code]. For integer and float properties, the first name in "
-"the list has value 0, the next 1, and so on. Explicit values can also be "
-"specified by appending [code]:integer[/code] to the name, e.g. [code]\"Zero,"
-"One,Three:3,Four,Six:6\"[/code]."
-msgstr ""
-"Weist darauf hin, dass eine Integer-, Float- oder String-Eigenschaft ein "
-"Aufzählungswert ist, der in einer über eine Hinweiszeichenfolge angegebenen "
-"Liste auszuwählen ist.\n"
-"Die Hinweiszeichenkette ist eine durch Kommata getrennte Liste von Namen wie "
-"z. B. [code]\"Hallo,Etwas,Sonst\"[/code]. Bei Integer- und Float-"
-"Eigenschaften hat der erste Name in der Liste den Wert 0, der nächste den "
-"Wert 1 und so weiter. Explizite Werte können auch durch Anhängen von [code]:"
-"integer[/code] an den Namen angegeben werden, z. B. [code]\"Null,Eins,Drei:3,"
-"Vier,Sechs:6\"[/code]."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property can be an enumerated value to pick in a list "
-"specified via a hint string such as [code]\"Hello,Something,Else\"[/code].\n"
-"Unlike [constant PROPERTY_HINT_ENUM] a property with this hint still accepts "
-"arbitrary values and can be empty. The list of values serves to suggest "
-"possible values."
-msgstr ""
-"weist darauf hin, dass eine Zeichenketteneigenschaft ein Aufzählungswert "
-"sein kann, der aus einer Liste ausgewählt werden kann, die über eine "
-"Hinweiszeichenfolge wie [code]\"Hallo,Etwas,Sonst\"[/code]\n"
-"m Gegensatz zu [constant PROPERTY_HINT_ENUM] akzeptiert eine Eigenschaft mit "
-"diesem Hinweis weiterhin beliebige Werte und kann leer sein. Die Liste der "
-"Werte dient dazu, mögliche Werte vorzuschlagen."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a float property should be edited via an exponential easing "
-"function. The hint string can include [code]\"attenuation\"[/code] to flip "
-"the curve horizontally and/or [code]\"inout\"[/code] to also include in/out "
-"easing."
-msgstr ""
-"Weist darauf hin, dass eine Float-Eigenschaft über eine exponentielle Easing-"
-"Funktion bearbeitet werden soll. Der Hinweisstring kann "
-"[code]\"attenuation\"[/code] enthalten, um die Kurve horizontal zu spiegeln "
-"und/oder [code]\"inout\"[/code], um auch eine In/Out-Easing-Funktion zu "
-"verwenden."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Deprecated hint, unused."
-msgstr "Veralteter Hinweis, unbenutzt."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer property is a bitmask with named bit flags. For "
-"example, to allow toggling bits 0, 1, 2 and 4, the hint could be something "
-"like [code]\"Bit0,Bit1,Bit2,,Bit4\"[/code]."
-msgstr ""
-"Weist darauf hin, dass eine Integer-Eigenschaft eine Bitmaske mit benannten "
-"Bit-Flags ist. Um z. B. das Umschalten der Bits 0, 1, 2 und 4 zu "
-"ermöglichen, könnte der Hinweis etwa so lauten: [code]\"Bit0,Bit1,Bit2,,"
-"Bit4\"[/code]."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer property is a bitmask using the optionally named 2D "
-"render layers."
-msgstr ""
-"Weist darauf hin, dass eine Integer-Eigenschaft eine Bitmaske ist, welche "
-"die optional benannten 2D-Renderebenen verwendet."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer property is a bitmask using the optionally named 2D "
-"physics layers."
-msgstr ""
-"Weist darauf hin, dass eine Integer-Eigenschaft eine Bitmaske ist, welche "
-"die optional benannten 2D-Physikebenen verwendet."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid ""
-"Hints that an integer property is a bitmask using the optionally named 2D "
-"navigation layers."
-msgstr ""
-"Weist darauf hin, dass eine Integer-Eigenschaft eine Bitmaske ist, welche "
-"die optional benannten 2D-Renderebenen verwendet."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer property is a bitmask using the optionally named 3D "
-"render layers."
-msgstr ""
-"Weist darauf hin, dass es sich bei einer Integer-Eigenschaft um eine "
-"Bitmaske handelt, welche die optional benannten 3D-Renderebenen verwendet."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that an integer property is a bitmask using the optionally named 3D "
-"physics layers."
-msgstr ""
-"Weist darauf hin, dass eine Integer-Eigenschaft eine Bitmaske ist, welche "
-"die optional benannten 3D-Physikebenen verwendet."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid ""
-"Hints that an integer property is a bitmask using the optionally named 3D "
-"navigation layers."
-msgstr ""
-"Weist darauf hin, dass eine Integer-Eigenschaft eine Bitmaske ist, welche "
-"die optional benannten 2D-Renderebenen verwendet."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property is a path to a file. Editing it will show a "
-"file dialog for picking the path. The hint string can be a set of filters "
-"with wildcards like [code]\"*.png,*.jpg\"[/code]."
-msgstr ""
-"Weist darauf hin, dass eine String-Eigenschaft ein Pfad zu einer Datei ist. "
-"Bei der Bearbeitung wird ein Dateidialog angezeigt, in dem Sie den Pfad "
-"auswählen können. Die Hinweiszeichenkette kann ein Satz von Filtern mit "
-"Platzhaltern sein, wie [code]\"*.png,*.jpg\"[/code]."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property is a path to a directory. Editing it will show "
-"a file dialog for picking the path."
-msgstr ""
-"Weist darauf hin, dass eine String-Eigenschaft ein Pfad zu einem Verzeichnis "
-"ist. Beim Bearbeiten wird ein Dateidialog zum Auswählen des Pfades angezeigt."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property is an absolute path to a file outside the "
-"project folder. Editing it will show a file dialog for picking the path. The "
-"hint string can be a set of filters with wildcards like [code]\"*.png,*."
-"jpg\"[/code]."
-msgstr ""
-"Weist darauf hin, dass eine String-Eigenschaft ein absoluter Pfad zu einer "
-"Datei außerhalb des Projektordners ist. Beim Bearbeiten wird ein Dateidialog "
-"zum Auswählen des Pfades angezeigt. Der Hinweisstring kann ein Satz von "
-"Filtern mit Platzhaltern wie [code]\"*.png,*.jpg\"[/code] sein."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property is an absolute path to a directory outside the "
-"project folder. Editing it will show a file dialog for picking the path."
-msgstr ""
-"Weist darauf hin, dass eine String-Eigenschaft ein absoluter Pfad zu einem "
-"Verzeichnis außerhalb des Projektordners ist. Beim Bearbeiten wird ein "
-"Dateidialog zum Auswählen des Pfades angezeigt."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a property is an instance of a [Resource]-derived type, "
-"optionally specified via the hint string (e.g. [code]\"Texture\"[/code]). "
-"Editing it will show a popup menu of valid resource types to instantiate."
-msgstr ""
-"Weist darauf hin, dass es sich bei einer Eigenschaft um eine Instanz eines "
-"von [Resource] abgeleiteten Typs handelt, der optional über die "
-"Hinweiszeichenkette angegeben wird (z. B. [code]\"Textur\"[/code]). Bei der "
-"Bearbeitung wird ein Popup-Menü mit gültigen Ressourcentypen zum "
-"Instanziieren angezeigt."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property is text with line breaks. Editing it will show "
-"a text input field where line breaks can be typed."
-msgstr ""
-"Weist darauf hin, dass eine String-Eigenschaft Text mit Zeilenumbrüchen ist. "
-"Beim Bearbeiten wird ein Texteingabefeld angezeigt, in das Zeilenumbrüche "
-"eingegeben werden können."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a string property should have a placeholder text visible on its "
-"input field, whenever the property is empty. The hint string is the "
-"placeholder text to use."
-msgstr ""
-"Weist darauf hin, dass für eine String-Eigenschaft ein Platzhaltertext in "
-"ihrem Eingabefeld sichtbar sein soll, wenn die Eigenschaft leer ist. Der "
-"Hint-String ist der zu verwendende Platzhaltertext."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hints that a color property should be edited without changing its alpha "
-"component, i.e. only R, G and B channels are edited."
-msgstr ""
-"Weist darauf hin, dass eine Farbeigenschaft bearbeitet werden soll, ohne "
-"ihre Alphakomponente zu ändern, d. h. es werden nur die Kanäle R, G und B "
-"bearbeitet."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Hints that an image is compressed using lossy compression."
-msgstr ""
-"Weist darauf hin, dass ein Bild mit verlustbehafteter Kompression "
-"komprimiert wurde."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Hints that an image is compressed using lossless compression."
-msgstr ""
-"Weist darauf hin, dass ein Bild mit verlustfreier Kompression komprimiert "
-"wurde."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Hint that a property represents a particular type. If a property is "
-"[constant TYPE_STRING], allows to set a type from the create dialog. If you "
-"need to create an [Array] to contain elements of a specific type, the "
-"[code]hint_string[/code] must encode nested types using [code]\":\"[/code] "
-"and [code]\"/\"[/code] for specifying [Resource] types. For instance:\n"
-"[codeblock]\n"
-"hint_string = \"%s:\" % [TYPE_INT] # Array of inteters.\n"
-"hint_string = \"%s:%s:\" % [TYPE_ARRAY, TYPE_REAL] # Two-dimensional array "
-"of floats.\n"
-"hint_string = \"%s/%s:Resource\" % [TYPE_OBJECT, TYPE_OBJECT] # Array of "
-"resources.\n"
-"hint_string = \"%s:%s/%s:Resource\" % [TYPE_ARRAY, TYPE_OBJECT, TYPE_OBJECT] "
-"# Two-dimensional array of resources.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] The final colon is required to specify for properly detecting "
-"built-in types."
-msgstr ""
-
-#: doc/classes/@GlobalScope.xml
-msgid "The property is serialized and saved in the scene file (default)."
-msgstr ""
-"Die Eigenschaft wird serialisiert und in der Szenendatei gespeichert "
-"(Standard)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The property is shown in the editor inspector (default)."
-msgstr "Die Eigenschaft wird im Editor-Inspektor angezeigt (Standard)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Deprecated usage flag, unused."
-msgstr "Veraltete Nutzungsflag, nicht verwendet."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The property can be checked in the editor inspector."
-msgstr "Die Eigenschaft kann im Editor-Inspektor überprüft werden."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The property is checked in the editor inspector."
-msgstr "Die Eigenschaft wird im Editor-Inspektor überprüft."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The property is a translatable string."
-msgstr "Die Eigenschaft ist eine übersetzbare Zeichenkette."
-
-#: doc/classes/@GlobalScope.xml
-#, fuzzy
-msgid "Used to group properties together in the editor. See [EditorInspector]."
-msgstr "Wird verwendet, um Eigenschaften im Editor zu gruppieren."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Used to categorize properties together in the editor."
-msgstr "Dient dazu, Eigenschaften im Editor gemeinsam zu kategorisieren."
-
-#: doc/classes/@GlobalScope.xml
-msgid "The property does not save its state in [PackedScene]."
-msgstr "Die Eigenschaft speichert ihren Zustand nicht in [PackedScene]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Editing the property prompts the user for restarting the editor."
-msgstr ""
-"Durch Bearbeiten der Eigenschaft wird der Benutzer aufgefordert, den Editor "
-"neu zu starten."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"The property is a script variable which should be serialized and saved in "
-"the scene file."
-msgstr ""
-"Die Eigenschaft ist eine Skriptvariable, die serialisiert und in der "
-"Szenendatei gespeichert werden soll."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Default usage (storage, editor and network)."
-msgstr "Standardverwendung (Speicher, Editor und Netzwerk)."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Default usage for translatable strings (storage, editor, network and "
-"internationalized)."
-msgstr ""
-"Standardverwendung für übersetzbare Strings (Speicher, Editor, Netzwerk und "
-"internationalisiert)."
-
-#: doc/classes/@GlobalScope.xml
-msgid ""
-"Default usage but without showing the property in the editor (storage, "
-"network)."
-msgstr ""
-"Standardmäßige Verwendung, aber ohne Anzeige der Eigenschaft im Editor "
-"(Speicher, Netzwerk)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Flag for a normal method."
-msgstr "Flag für eine normale Methode."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Flag for an editor method."
-msgstr "Flag für eine Editor-Methode."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Deprecated method flag, unused."
-msgstr "Veraltete Methoden-Flag, unbenutzt."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Flag for a constant method."
-msgstr "Flag für eine konstante Methode."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Flag for a virtual method."
-msgstr "Flag für eine virtuelle Methode."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Default method flags."
-msgstr "Standard-Methodenflags."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is [code]null[/code]."
-msgstr "Variable ist [code]null[/code]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [bool]."
-msgstr "Variable ist vom Typ [bool]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [int]."
-msgstr "Variable ist vom Typ [int]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [float] (real)."
-msgstr "Die Variable ist vom Typ [float] (real)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [String]."
-msgstr "Variable ist vom Typ [String]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Vector2]."
-msgstr "Variable ist vom Typ [Vector2]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Rect2]."
-msgstr "Variable ist vom Typ [Rect2]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Vector3]."
-msgstr "Variable ist vom Typ [Vector3]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Transform2D]."
-msgstr "Variable ist vom Typ [Transform2D]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Plane]."
-msgstr "Variable ist vom Typ [Plane]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Quat]."
-msgstr "Variable ist vom Typ [Quat]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [AABB]."
-msgstr "Variable ist vom Typ [AABB]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Basis]."
-msgstr "Variable ist vom Typ [Basis]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Transform]."
-msgstr "Variable ist vom Typ [Transform]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Color]."
-msgstr "Variable ist vom Typ [Color]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [NodePath]."
-msgstr "Variable ist vom Typ [NodePath]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [RID]."
-msgstr "Variable ist vom Typ [RID]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Object]."
-msgstr "Variable ist vom Typ [Object]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Dictionary]."
-msgstr "Variable ist vom Typ [Dictionary]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [Array]."
-msgstr "Variable ist vom Typ [Array]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolByteArray]."
-msgstr "Variable ist vom Typ [PoolByteArray]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolIntArray]."
-msgstr "Variable ist vom Typ [PoolIntArray]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolRealArray]."
-msgstr "Variable ist vom Typ [PoolRealArray]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolStringArray]."
-msgstr "Variable ist vom Typ [PoolStringArray]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolVector2Array]."
-msgstr "Variable ist vom Typ [PoolVector2Array]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolVector3Array]."
-msgstr "Variable ist vom Typ [PoolVector3Array]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Variable is of type [PoolColorArray]."
-msgstr "Variable ist vom Typ [PoolColorArray]."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Represents the size of the [enum Variant.Type] enum."
-msgstr "Stellt die Größe dar des [enum Variant.Type] enum."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Equality operator ([code]==[/code])."
-msgstr "Gleichheitsoperator ([code]==[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Inequality operator ([code]!=[/code])."
-msgstr "Ungleichheitsoperator ([code]!=[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Less than operator ([code]<[/code])."
-msgstr "Kleiner als Operator ([code]<[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Less than or equal operator ([code]<=[/code])."
-msgstr "Kleiner-als-oder-gleich-Operator ([code]<=[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Greater than operator ([code]>[/code])."
-msgstr "Größer-als-Operator ([code]>[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Greater than or equal operator ([code]>=[/code])."
-msgstr "Größer als oder Gleich-Operator ([code]>=[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Addition operator ([code]+[/code])."
-msgstr "Additionsoperator ([code]+[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Subtraction operator ([code]-[/code])."
-msgstr "Subtraktionsoperator ([code]-[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Multiplication operator ([code]*[/code])."
-msgstr "Multiplikationsoperator ([code]*[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Division operator ([code]/[/code])."
-msgstr "Divisionsoperator ([code]/[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Unary negation operator ([code]-[/code])."
-msgstr "Unärer Negationsoperator ([code]-[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Unary plus operator ([code]+[/code])."
-msgstr "Unärer Plus-Operator ([code]+[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Remainder/modulo operator ([code]%[/code])."
-msgstr "Rest/Modulo-Operator ([code]%[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "String concatenation operator ([code]+[/code])."
-msgstr "String-Verkettungsoperator ([code]+[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Left shift operator ([code]<<[/code])."
-msgstr "Linksschiebe-Operator ([code]<<[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Right shift operator ([code]>>[/code])."
-msgstr "Rechtsschiebe-Operator ([code]>>[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bitwise AND operator ([code]&[/code])."
-msgstr "Bitweiser UND Operator ([code]&[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bitwise OR operator ([code]|[/code])."
-msgstr "Bitweiser ODER-Operator ([code]|[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bitwise XOR operator ([code]^[/code])."
-msgstr "Bitweiser XOR-Operator ([code]^[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Bitwise NOT operator ([code]~[/code])."
-msgstr "Bitweiser NICHT-Operator ([code]~[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Logical AND operator ([code]and[/code] or [code]&&[/code])."
-msgstr "Logischer UND-Operator ([code]und[/code] oder [code]&&[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Logical OR operator ([code]or[/code] or [code]||[/code])."
-msgstr "Logischer ODER-Operator ([code]oder[/code] oder [code]||[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Logical XOR operator (not implemented in GDScript)."
-msgstr "Logischer XOR-Operator (nicht in GDScript implementiert)."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Logical NOT operator ([code]not[/code] or [code]![/code])."
-msgstr "Logischer NOT-Operator ([code]not[/code] oder [code]![/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Logical IN operator ([code]in[/code])."
-msgstr "Logischer IN-Operator ([code]in[/code])."
-
-#: doc/classes/@GlobalScope.xml
-msgid "Represents the size of the [enum Variant.Operator] enum."
-msgstr "Stellt die Größe dar des [enum Variant.Operator] enum."
-
-#: doc/classes/AABB.xml
-msgid "Axis-Aligned Bounding Box."
-msgstr "Achsen-Ausgerichtete Begrenzungs Box."
-
-#: doc/classes/AABB.xml
-#, fuzzy
-msgid ""
-"[AABB] consists of a position, a size, and several utility functions. It is "
-"typically used for fast overlap tests.\n"
-"It uses floating-point coordinates. The 2D counterpart to [AABB] is "
-"[Rect2].\n"
-"[b]Note:[/b] Unlike [Rect2], [AABB] does not have a variant that uses "
-"integer coordinates."
-msgstr ""
-"[AABB] besteht aus einer Position, einer Größe und mehreren Hilfsfunktionen. "
-"Es wird für schnelle Überlappungstest genutzt.\n"
-"Es benutzt Kommazahlen für die Koordinaten. Das Gegenstück in 2D zu [AABB] "
-"ist [Rect2].\n"
-"[b]Hinweis:[/b] Im Gegensatz zu [Rect2] hat [AABB] keine Variante die "
-"Ganzzahlen statt Kommazahlen nutzt."
-
-#: doc/classes/AABB.xml doc/classes/Basis.xml doc/classes/Rect2.xml
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "Math tutorial index"
-msgstr "Mathematik Anleitungsindex"
-
-#: doc/classes/AABB.xml doc/classes/Rect2.xml doc/classes/Vector2.xml
-#: doc/classes/Vector3.xml
-msgid "Vector math"
-msgstr "Vektor-Mathematik"
-
-#: doc/classes/AABB.xml doc/classes/Rect2.xml doc/classes/Vector2.xml
-#: doc/classes/Vector3.xml
-msgid "Advanced vector math"
-msgstr "Fortgeschrittene Vektor-Mathematik"
-
-#: doc/classes/AABB.xml
-msgid "Constructs an [AABB] from a position and size."
-msgstr "Konstruiert einen [AABB] aus einer Position und einer Größe."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns an AABB with equivalent position and size, modified so that the most-"
-"negative corner is the origin and the size is positive."
-msgstr ""
-"Gibt ein AABB mit entsprechender Position und Größe zurück, das so "
-"modifiziert wurde, dass die negativste Ecke der Ursprung ist und die Größe "
-"positiv ist."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns [code]true[/code] if this [AABB] completely encloses another one."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn dieses [AABB] ein anderes vollständig "
-"umschließt."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns a copy of this [AABB] expanded to include a given point.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"# position (-3, 2, 0), size (1, 1, 1)\n"
-"var box = AABB(Vector3(-3, 2, 0), Vector3(1, 1, 1))\n"
-"# position (-3, -1, 0), size (3, 4, 2), so we fit both the original AABB and "
-"Vector3(0, -1, 2)\n"
-"var box2 = box.expand(Vector3(0, -1, 2))\n"
-"[/codeblock]"
-msgstr ""
-"Gibt eine Kopie dieses [AABB] zurück, erweitert um einen bestimmten Punkt "
-"einzuschließen.\n"
-"[b]Beispiel:[/b]\n"
-"[codeblock]\n"
-"# Position (-3, 2, 0), Größe (1, 1, 1)\n"
-"var box = AABB(Vector3(-3, 2, 0), Vector3(1, 1, 1))\n"
-"# Position (-3, -1, 0), Größe (3, 4, 2), so dass wir sowohl das "
-"ursprüngliche AABB als auch Vector3(0, -1, 2) unterbringen\n"
-"var box2 = box.expand(Vector3(0, -1, 2))\n"
-"[/codeblock]"
-
-#: doc/classes/AABB.xml
-msgid "Returns the volume of the [AABB]."
-msgstr "Gibt die Lautstärke des [AABB] zurück."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns the center of the [AABB], which is equal to [member position] + "
-"([member size] / 2)."
-msgstr ""
-"Gibt den Mittelwert von [AABB] zurück, welcher gleich ist wie [member "
-"position] + ([member size] / 2)."
-
-#: doc/classes/AABB.xml
-msgid "Gets the position of the 8 endpoints of the [AABB] in space."
-msgstr "Liefert die Position der 8 Endpunkte des [AABB] im Raum."
-
-#: doc/classes/AABB.xml
-msgid "Returns the normalized longest axis of the [AABB]."
-msgstr "Liefert die normierte längste Achse des [AABB]."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns the index of the longest axis of the [AABB] (according to "
-"[Vector3]'s [code]AXIS_*[/code] constants)."
-msgstr ""
-"Liefert den Index der längsten Achse des [AABB] (gemäß den [code]AXIS_*[/"
-"code]-Konstanten von [Vector3])."
-
-#: doc/classes/AABB.xml
-msgid "Returns the scalar length of the longest axis of the [AABB]."
-msgstr "Liefert die skalare Länge der längsten Achse des [AABB]."
-
-#: doc/classes/AABB.xml
-msgid "Returns the normalized shortest axis of the [AABB]."
-msgstr "Liefert die normierte kürzeste Achse des [AABB]."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns the index of the shortest axis of the [AABB] (according to "
-"[Vector3]::AXIS* enum)."
-msgstr ""
-"Liefert den Index der kürzesten Achse des [AABB] (gemäß [Vector3]::AXIS* "
-"enum)."
-
-#: doc/classes/AABB.xml
-msgid "Returns the scalar length of the shortest axis of the [AABB]."
-msgstr "Liefert die skalare Länge der kürzesten Achse des [AABB]."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns the support point in a given direction. This is useful for collision "
-"detection algorithms."
-msgstr ""
-"Gibt den Stützpunkt in einer bestimmten Richtung zurück. Dies ist nützlich "
-"für Algorithmen zur Kollisionserkennung."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns a copy of the [AABB] grown a given amount of units towards all the "
-"sides."
-msgstr ""
-"Gibt eine Kopie des [AABB] zurück, die um eine bestimmte Anzahl von "
-"Einheiten nach allen Seiten gewachsen ist."
-
-#: doc/classes/AABB.xml
-msgid "Returns [code]true[/code] if the [AABB] is flat or empty."
-msgstr "Gibt [code]true[/code] zurück, wenn der [AABB] flach oder leer ist."
-
-#: doc/classes/AABB.xml
-msgid "Returns [code]true[/code] if the [AABB] is empty."
-msgstr "Gibt [code]true[/code] zurück, wenn der [AABB] leer ist."
-
-#: doc/classes/AABB.xml
-msgid "Returns [code]true[/code] if the [AABB] contains a point."
-msgstr "Gibt [code]true[/code] zurück, wenn der [AABB] einen Punkt enthält."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns the intersection between two [AABB]. An empty AABB (size 0,0,0) is "
-"returned on failure."
-msgstr ""
-"Liefert die Schnittmenge zwischen zwei [AABB]. Bei einem Fehler wird ein "
-"leerer AABB (Größe 0,0,0) zurückgegeben."
-
-#: doc/classes/AABB.xml
-msgid "Returns [code]true[/code] if the [AABB] overlaps with another."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn sich das [AABB] mit einem anderen "
-"überschneidet."
-
-#: doc/classes/AABB.xml
-msgid "Returns [code]true[/code] if the [AABB] is on both sides of a plane."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der [AABB] auf beiden Seiten einer Ebene "
-"liegt."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns [code]true[/code] if the [AABB] intersects the line segment between "
-"[code]from[/code] and [code]to[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der [AABB] das Liniensegment zwischen "
-"[code]from[/code] und [code]to[/code] schneidet."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns [code]true[/code] if this [AABB] and [code]aabb[/code] are "
-"approximately equal, by calling [method @GDScript.is_equal_approx] on each "
-"component."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn dieses [AABB] und [code]aabb[/code] "
-"annähernd gleich sind, indem die [method @GDScript.is_equal_approx] für jede "
-"Komponente aufgerufen wird."
-
-#: doc/classes/AABB.xml
-msgid ""
-"Returns a larger [AABB] that contains both this [AABB] and [code]with[/code]."
-msgstr ""
-"Gibt ein größeres [AABB] zurück, das sowohl dieses [AABB] als auch "
-"[code]mit[/code] enthält."
-
-#: doc/classes/AABB.xml doc/classes/Rect2.xml
-msgid ""
-"Ending corner. This is calculated as [code]position + size[/code]. Setting "
-"this value will change the size."
-msgstr ""
-"Endende Ecke. Dies wird berechnet als [code]Position + Größe[/code]. Wenn "
-"Sie diesen Wert einstellen, wird die Größe geändert."
-
-#: doc/classes/AABB.xml doc/classes/Rect2.xml
-msgid "Beginning corner. Typically has values lower than [member end]."
-msgstr "Beginnende Ecke. Hat typischerweise niedrigere Werte als [member end]."
-
-#: doc/classes/AABB.xml doc/classes/Rect2.xml
-#, fuzzy
-msgid ""
-"Size from [member position] to [member end]. Typically, all components are "
-"positive.\n"
-"If the size is negative, you can use [method abs] to fix it."
-msgstr ""
-"Größe von [member position] bis [member end]. Normalerweise sind alle "
-"Komponenten positiv.\n"
-"Wenn die Größe negativ ist, können Sie [method abs] verwenden, um sie zu "
-"fixieren."
-
-#: doc/classes/AcceptDialog.xml
-msgid "Base dialog for user notification."
-msgstr "Basisdialog für Benutzerbenachrichtigung."
-
-#: doc/classes/AcceptDialog.xml
-msgid ""
-"This dialog is useful for small notifications to the user about an event. It "
-"can only be accepted or closed, with the same result."
-msgstr ""
-"Dieser Dialog ist nützlich für kleine Benachrichtigungen an den Benutzer "
-"über ein Ereignis. Er kann nur angenommen oder geschlossen werden, mit dem "
-"gleichen Ergebnis."
-
-#: doc/classes/AcceptDialog.xml
-#, fuzzy
-msgid ""
-"Adds a button with label [code]text[/code] and a custom [code]action[/code] "
-"to the dialog and returns the created button. [code]action[/code] will be "
-"passed to the [signal custom_action] signal when pressed.\n"
-"If [code]true[/code], [code]right[/code] will place the button to the right "
-"of any sibling buttons.\n"
-"You can use [method remove_button] method to remove a button created with "
-"this method from the dialog."
-msgstr ""
-"Fügt dem Dialog eine Schaltfläche mit Beschriftung [code]text[/code] und "
-"einer benutzerdefinierten [code]action[/code] hinzu und gibt die erstellte "
-"Schaltfläche zurück. Die [code]action[/code] wird beim Drücken an das Signal "
-"[signal custom_action] übergeben.\n"
-"Wenn [code]true[/code], platziert [code]right[/code] die Schaltfläche rechts "
-"von allen Geschwisterschaltflächen."
-
-#: doc/classes/AcceptDialog.xml
-#, fuzzy
-msgid ""
-"Adds a button with label [code]name[/code] and a cancel action to the dialog "
-"and returns the created button.\n"
-"You can use [method remove_button] method to remove a button created with "
-"this method from the dialog."
-msgstr ""
-"Fügt dem Dialog eine Schaltfläche mit Beschriftung [code]name[/code] und "
-"einer Abbruchaktion hinzu und gibt die erstellte Schaltfläche zurück."
-
-#: doc/classes/AcceptDialog.xml
-msgid ""
-"Returns the label used for built-in text.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-"Gibt die für den eingebauten Text verwendete Bezeichnung zurück.\n"
-"[b]Warnung:[/b] Dies ist ein erforderlicher interner Knoten; das Entfernen "
-"und Freigeben dieses Knotens kann zu einem Absturz führen. Wenn Sie ihn oder "
-"eines seiner Kinder ausblenden möchten, verwenden Sie deren Eigenschaft "
-"[member CanvasItem.visible]."
-
-#: doc/classes/AcceptDialog.xml
-msgid ""
-"Returns the OK [Button] instance.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-"Gibt die OK [Button]-Instanz zurück.\n"
-"[b]Warnung:[/b] Dies ist ein erforderlicher interner Knoten; das Entfernen "
-"und Freigeben dieses Knotens kann zu einem Absturz führen. Wenn Sie ihn oder "
-"eines seiner Kinder ausblenden möchten, verwenden Sie deren Eigenschaft "
-"[member CanvasItem.visible]."
-
-#: doc/classes/AcceptDialog.xml
-msgid ""
-"Registers a [LineEdit] in the dialog. When the enter key is pressed, the "
-"dialog will be accepted."
-msgstr ""
-"Registriert ein [LineEdit] im Dialog. Wenn die Eingabetaste gedrückt ist, "
-"wird der Dialog übernommen."
-
-#: doc/classes/AcceptDialog.xml
-msgid ""
-"Removes the [code]button[/code] from the dialog. Does NOT free the "
-"[code]button[/code]. The [code]button[/code] must be a [Button] added with "
-"[method add_button] or [method add_cancel] method. After removal, pressing "
-"the [code]button[/code] will no longer emit this dialog's [signal "
-"custom_action] signal or cancel this dialog."
-msgstr ""
-"Entfernt den [code]button[/code] aus dem Dialog. Gibt den [code]button[/"
-"code] NICHT frei. Der [code]button[/code] muss ein [Button] sein, der mit "
-"der [method add_button] oder [method add_cancel] Methode hinzugefügt wurde. "
-"Nach dem Entfernen wird das Drücken des [code]button[/code] nicht mehr das "
-"[signal custom_action]-Signal dieses Dialogs auslösen oder diesen Dialog "
-"abbrechen."
-
-#: doc/classes/AcceptDialog.xml
-msgid "Sets autowrapping for the text in the dialog."
-msgstr "Legt den automatischen Umbruch für den Text im Dialog fest."
-
-#: doc/classes/AcceptDialog.xml
-msgid ""
-"If [code]true[/code], the dialog is hidden when the OK button is pressed. "
-"You can set it to [code]false[/code] if you want to do e.g. input validation "
-"when receiving the [signal confirmed] signal, and handle hiding the dialog "
-"in your own logic.\n"
-"[b]Note:[/b] Some nodes derived from this class can have a different default "
-"value, and potentially their own built-in logic overriding this setting. For "
-"example [FileDialog] defaults to [code]false[/code], and has its own input "
-"validation code that is called when you press OK, which eventually hides the "
-"dialog if the input is valid. As such, this property can't be used in "
-"[FileDialog] to disable hiding the dialog when pressing OK."
-msgstr ""
-"Wenn [code]true[/code], wird das Dialogfeld ausgeblendet, wenn die "
-"Schaltfläche OK gedrückt wird. Sie können ihn auf [code]false[/code] setzen, "
-"wenn Sie z. B. eine Eingabevalidierung beim Empfang des Signals [signal "
-"confirmed] durchführen und das Ausblenden des Dialogs in Ihrer eigenen Logik "
-"behandeln wollen.\n"
-"[b]Hinweis:[/b] Einige von dieser Klasse abgeleitete Knoten können einen "
-"anderen Standardwert haben und möglicherweise ihre eigene eingebaute Logik, "
-"die diese Einstellung überschreibt. Zum Beispiel hat [FileDialog] den "
-"Standardwert [code]false[/code] und verfügt über einen eigenen "
-"Eingabeüberprüfungscode, der aufgerufen wird, wenn Sie auf OK drücken, und "
-"der schließlich das Dialogfeld ausblendet, wenn die Eingabe gültig ist. "
-"Daher kann diese Eigenschaft in [FileDialog] nicht verwendet werden, um das "
-"Ausblenden des Dialogs beim Drücken von OK zu deaktivieren."
-
-#: doc/classes/AcceptDialog.xml
-msgid "The text displayed by the dialog."
-msgstr "Der vom Dialog angezeigte Text."
-
-#: doc/classes/AcceptDialog.xml
-msgid "Emitted when the dialog is accepted, i.e. the OK button is pressed."
-msgstr ""
-"Wird ausgegeben, wenn der Dialog akzeptiert wird, d. h. die Schaltfläche OK "
-"gedrückt wird."
-
-#: doc/classes/AcceptDialog.xml
-msgid "Emitted when a custom button is pressed. See [method add_button]."
-msgstr ""
-"Wird ausgegeben, wenn eine benutzerdefinierte Taste gedrückt wird. Siehe "
-"[method add_button]."
-
-#: doc/classes/AESContext.xml
-msgid "Interface to low level AES encryption features."
-msgstr "Schnittstelle zu AES-Verschlüsselungsfunktionen auf niedriger Ebene."
-
-#: doc/classes/AESContext.xml
-msgid ""
-"This class provides access to AES encryption/decryption of raw data. Both "
-"AES-ECB and AES-CBC mode are supported.\n"
-"[codeblock]\n"
-"extends Node\n"
-"\n"
-"var aes = AESContext.new()\n"
-"\n"
-"func _ready():\n"
-"    var key = \"My secret key!!!\" # Key must be either 16 or 32 bytes.\n"
-"    var data = \"My secret text!!\" # Data size must be multiple of 16 "
-"bytes, apply padding if needed.\n"
-"    # Encrypt ECB\n"
-"    aes.start(AESContext.MODE_ECB_ENCRYPT, key.to_utf8())\n"
-"    var encrypted = aes.update(data.to_utf8())\n"
-"    aes.finish()\n"
-"    # Decrypt ECB\n"
-"    aes.start(AESContext.MODE_ECB_DECRYPT, key.to_utf8())\n"
-"    var decrypted = aes.update(encrypted)\n"
-"    aes.finish()\n"
-"    # Check ECB\n"
-"    assert(decrypted == data.to_utf8())\n"
-"\n"
-"    var iv = \"My secret iv!!!!\" # IV must be of exactly 16 bytes.\n"
-"    # Encrypt CBC\n"
-"    aes.start(AESContext.MODE_CBC_ENCRYPT, key.to_utf8(), iv.to_utf8())\n"
-"    encrypted = aes.update(data.to_utf8())\n"
-"    aes.finish()\n"
-"    # Decrypt CBC\n"
-"    aes.start(AESContext.MODE_CBC_DECRYPT, key.to_utf8(), iv.to_utf8())\n"
-"    decrypted = aes.update(encrypted)\n"
-"    aes.finish()\n"
-"    # Check CBC\n"
-"    assert(decrypted == data.to_utf8())\n"
-"[/codeblock]"
-msgstr ""
-"Diese Klasse bietet Zugriff auf die AES-Verschlüsselung/Entschlüsselung von "
-"Rohdaten. Es werden sowohl der AES-ECB- als auch der AES-CBC-Modus "
-"unterstützt.\n"
-"[codeblock]\n"
-"extends Node\n"
-"\n"
-"var aes = AESContext.new()\n"
-"\n"
-"func _ready():\n"
-"    var key = \"My secret key!!!\" # Key must be either 16 or 32 bytes.\n"
-"    var data = \"My secret text!!\" # Data size must be multiple of 16 "
-"bytes, apply padding if needed.\n"
-"    # Encrypt ECB\n"
-"    aes.start(AESContext.MODE_ECB_ENCRYPT, key.to_utf8())\n"
-"    var encrypted = aes.update(data.to_utf8())\n"
-"    aes.finish()\n"
-"    # Decrypt ECB\n"
-"    aes.start(AESContext.MODE_ECB_DECRYPT, key.to_utf8())\n"
-"    var decrypted = aes.update(encrypted)\n"
-"    aes.finish()\n"
-"    # Check ECB\n"
-"    assert(decrypted == data.to_utf8())\n"
-"\n"
-"    var iv = \"My secret iv!!!!\" # IV must be of exactly 16 bytes.\n"
-"    # Encrypt CBC\n"
-"    aes.start(AESContext.MODE_CBC_ENCRYPT, key.to_utf8(), iv.to_utf8())\n"
-"    encrypted = aes.update(data.to_utf8())\n"
-"    aes.finish()\n"
-"    # Decrypt CBC\n"
-"    aes.start(AESContext.MODE_CBC_DECRYPT, key.to_utf8(), iv.to_utf8())\n"
-"    decrypted = aes.update(encrypted)\n"
-"    aes.finish()\n"
-"    # Check CBC\n"
-"    assert(decrypted == data.to_utf8())\n"
-"[/codeblock]"
-
-#: doc/classes/AESContext.xml
-msgid "Close this AES context so it can be started again. See [method start]."
-msgstr ""
-"Schließen Sie diesen AES-Kontext, damit er erneut gestartet werden kann. "
-"Siehe [method start]."
-
-#: doc/classes/AESContext.xml
-#, fuzzy
-msgid ""
-"Get the current IV state for this context (IV gets updated when calling "
-"[method update]). You normally don't need this function.\n"
-"[b]Note:[/b] This function only makes sense when the context is started with "
-"[constant MODE_CBC_ENCRYPT] or [constant MODE_CBC_DECRYPT]."
-msgstr ""
-"Holt den aktuellen IV-Status für diesen Kontext (IV wird beim Aufruf der "
-"[method update] aktualisiert). Normalerweise benötigen Sie diese Funktion "
-"nicht.\n"
-"Hinweis: Diese Funktion ist nur sinnvoll, wenn der Kontext mit der [constant "
-"MODE_CBC_ENCRYPT] oder [constant MODE_CBC_DECRYPT] gestartet wird."
-
-#: doc/classes/AESContext.xml
-msgid ""
-"Start the AES context in the given [code]mode[/code]. A [code]key[/code] of "
-"either 16 or 32 bytes must always be provided, while an [code]iv[/code] "
-"(initialization vector) of exactly 16 bytes, is only needed when [code]mode[/"
-"code] is either [constant MODE_CBC_ENCRYPT] or [constant MODE_CBC_DECRYPT]."
-msgstr ""
-"Startet den AES-Kontext im angegebenen [code]mode[/code]. Ein [code]key[/"
-"code] von entweder 16 oder 32 Byte muss immer angegeben werden, während ein "
-"[code]iv[/code] (Initialisierungsvektor) von genau 16 Byte nur benötigt "
-"wird, wenn [code]mode[/code] entweder [constant MODE_CBC_ENCRYPT] oder "
-"[constant MODE_CBC_DECRYPT] ist."
-
-#: doc/classes/AESContext.xml
-#, fuzzy
-msgid ""
-"Run the desired operation for this AES context. Will return a "
-"[PoolByteArray] containing the result of encrypting (or decrypting) the "
-"given [code]src[/code]. See [method start] for mode of operation.\n"
-"[b]Note:[/b] The size of [code]src[/code] must be a multiple of 16. Apply "
-"some padding if needed."
-msgstr ""
-"Führt die gewünschte Operation für diesen AES-Kontext aus. Gibt ein "
-"[PackedByteArray] zurück, welches das Ergebnis der Verschlüsselung (oder "
-"Entschlüsselung) der angegebenen [code]src[/code] enthält. Siehe [method "
-"start] für die Funktionsweise.\n"
-"Hinweis: Die Größe von [code]src[/code] muss ein Vielfaches von 16 sein. "
-"Wenden Sie bei Bedarf etwas Füllung an."
-
-#: doc/classes/AESContext.xml
-msgid "AES electronic codebook encryption mode."
-msgstr "AES-Verschlüsselungsmodus für elektronisches Codebuch."
-
-#: doc/classes/AESContext.xml
-msgid "AES electronic codebook decryption mode."
-msgstr "Entschlüsselungsmodus für elektronisches AES-Codebuch."
-
-#: doc/classes/AESContext.xml
-msgid "AES cipher blocker chaining encryption mode."
-msgstr "AES Chiffre-Blockerverkettung Verschlüsselungsmodus."
-
-#: doc/classes/AESContext.xml
-msgid "AES cipher blocker chaining decryption mode."
-msgstr "AES-Chiffre-Blocker Verkettung Entschlüsselungsmodus."
-
-#: doc/classes/AESContext.xml
-msgid "Maximum value for the mode enum."
-msgstr "Maximaler Wert für das Modus-Enum."
-
-#: doc/classes/AnimatedSprite.xml
-#, fuzzy
-msgid ""
-"Sprite node that contains multiple textures as frames to play for animation."
-msgstr "Sprite-Knoten, der mehrere Texturen für die Animation verwenden kann."
-
-#: doc/classes/AnimatedSprite.xml
-msgid ""
-"[AnimatedSprite] is similar to the [Sprite] node, except it carries multiple "
-"textures as animation frames. Animations are created using a [SpriteFrames] "
-"resource, which allows you to import image files (or a folder containing "
-"said files) to provide the animation frames for the sprite. The "
-"[SpriteFrames] resource can be configured in the editor via the SpriteFrames "
-"bottom panel.\n"
-"[b]Note:[/b] You can associate a set of normal or specular maps by creating "
-"additional [SpriteFrames] resources with a [code]_normal[/code] or "
-"[code]_specular[/code] suffix. For example, having 3 [SpriteFrames] "
-"resources [code]run[/code], [code]run_normal[/code], and [code]run_specular[/"
-"code] will make it so the [code]run[/code] animation uses normal and "
-"specular maps."
-msgstr ""
-"[AnimatedSprite] ähnelt dem [Sprite]-Knoten, außer dass er mehrere Texturen "
-"als Animationsrahmen enthält. Animationen werden mit einer [SpriteFrames]-"
-"Ressource erstellt, die es Ihnen ermöglicht, Bilddateien (oder einen Ordner "
-"mit diesen Dateien) zu importieren, um die Animationsrahmen für das Sprite "
-"bereitzustellen. Die [SpriteFrames]-Ressource kann im Editor über die untere "
-"Leiste SpriteFrames konfiguriert werden.\n"
-"[b]Hinweis:[/b] Du kannst eine Reihe von Normal- oder Specular-Maps "
-"zuordnen, indem du zusätzliche [SpriteFrames]-Ressourcen mit einem "
-"[code]_normal[/code] oder [code]_specular[/code] Suffix erstellst. Wenn du "
-"zum Beispiel 3 [SpriteFrames]-Ressourcen [code]run[/code], [code]run_normal[/"
-"code] und [code]run_specular[/code] hast, wird die [code]run[/code]-"
-"Animation normale und spekulare Maps verwenden."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/AnimationPlayer.xml
-msgid "2D Sprite animation"
-msgstr "2D Sprite Animation"
-
-#: doc/classes/AnimatedSprite.xml doc/classes/Area2D.xml
-#: doc/classes/AudioStreamPlayer.xml doc/classes/Button.xml
-#: doc/classes/CanvasLayer.xml doc/classes/CollisionShape2D.xml
-#: doc/classes/ColorRect.xml doc/classes/Input.xml doc/classes/InputEvent.xml
-#: doc/classes/InputEventAction.xml doc/classes/Label.xml doc/classes/Timer.xml
-#: doc/classes/VisibilityNotifier2D.xml
-msgid "2D Dodge The Creeps Demo"
-msgstr "2D „Dodge The Creeps“ Demo"
-
-#: doc/classes/AnimatedSprite.xml
-msgid ""
-"Plays the animation named [code]anim[/code]. If no [code]anim[/code] is "
-"provided, the current animation is played. If [code]backwards[/code] is "
-"[code]true[/code], the animation will be played in reverse."
-msgstr ""
-"Spielt die Animation mit dem Namen [code]anim[/code] ab. Wenn keine "
-"[code]anim[/code] angegeben ist, wird die aktuelle Animation abgespielt. "
-"Wenn [code]backwards[/code] dann [code]true[/code] ist, wird die Animation "
-"rückwärts abgespielt."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml
-msgid "Stops the current animation (does not reset the frame counter)."
-msgstr "Hält die aktuelle Animation an (setzt den Bildzähler nicht zurück)."
-
-#: doc/classes/AnimatedSprite.xml
-#, fuzzy
-msgid ""
-"The current animation from the [member frames] resource. If this value "
-"changes, the [code]frame[/code] counter is reset."
-msgstr ""
-"Die aktuelle Animation aus der Ressource [code]frames[/code]. Wenn sich "
-"dieser Wert ändert, wird der [code]frames[/code]-Zähler zurückgesetzt."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/SpriteBase3D.xml
-msgid "If [code]true[/code], texture will be centered."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/Sprite.xml
-#: doc/classes/SpriteBase3D.xml doc/classes/TextureButton.xml
-#: doc/classes/TextureRect.xml
-msgid "If [code]true[/code], texture is flipped horizontally."
-msgstr "Wenn [code]true[/code], wird die Textur horizontal gespiegelt."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/Sprite.xml
-#: doc/classes/SpriteBase3D.xml doc/classes/TextureButton.xml
-#: doc/classes/TextureRect.xml
-msgid "If [code]true[/code], texture is flipped vertically."
-msgstr "Wenn [code]true[/code], wird die Textur vertikal gespiegelt."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml
-msgid "The displayed animation frame's index."
-msgstr "Der Index des angezeigten Animationsrahmens."
-
-#: doc/classes/AnimatedSprite.xml
-msgid ""
-"The [SpriteFrames] resource containing the animation(s). Allows you the "
-"option to load, edit, clear, make unique and save the states of the "
-"[SpriteFrames] resource."
-msgstr ""
-"Die [SpriteFrames]-Ressource, die die Animation(en) enthält. Ermöglicht es "
-"Ihnen, die Zustände der [SpriteFrames]-Ressource zu laden, zu bearbeiten, zu "
-"löschen, eindeutig zu machen und zu speichern."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/Sprite.xml
-#: doc/classes/SpriteBase3D.xml
-msgid "The texture's drawing offset."
-msgstr "Der Zeichen-Offset der Textur."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml
-msgid "If [code]true[/code], the [member animation] is currently playing."
-msgstr "Wenn [code]true[/code], wird gerade [member animation]] abgespielt."
-
-#: doc/classes/AnimatedSprite.xml
-msgid "The animation speed is multiplied by this value."
-msgstr "Die Animationsgeschwindigkeit wird mit diesem Wert multipliziert."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml
-msgid ""
-"Emitted when the animation is finished (when it plays the last frame). If "
-"the animation is looping, this signal is emitted every time the last frame "
-"is drawn."
-msgstr ""
-"Wird ausgegeben, wenn die Animation beendet ist (wenn sie das letzte Bild "
-"abspielt). Wenn die Animation eine Schleife bildet, wird dieses Signal jedes "
-"Mal ausgegeben, wenn das letzte Bild gezeichnet wird."
-
-#: doc/classes/AnimatedSprite.xml doc/classes/AnimatedSprite3D.xml
-msgid "Emitted when [member frame] changed."
-msgstr "Wird ausgegeben, wenn [member frame] geändert wurde."
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid ""
-"2D sprite node in 3D world, that can use multiple 2D textures for animation."
-msgstr ""
-"2D-Sprite-Knoten in der 3D-Welt, der mehrere 2D-Texturen für die Animation "
-"verwenden kann."
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid ""
-"Animations are created using a [SpriteFrames] resource, which can be "
-"configured in the editor via the SpriteFrames panel."
-msgstr ""
-"Animationen werden mit einer [SpriteFrames]-Ressource erstellt, die im "
-"Editor über das Bedienfeld SpriteFrames konfiguriert werden kann."
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid "2D Sprite animation (also applies to 3D)"
-msgstr "2D Sprite Animation (gilt ebenfalls für 3D)"
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid "Returns [code]true[/code] if an animation is currently being played."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn gerade eine Animation abgespielt wird."
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid ""
-"Plays the animation named [code]anim[/code]. If no [code]anim[/code] is "
-"provided, the current animation is played."
-msgstr ""
-"Spielt die Animation mit dem Namen [code]anim[/code] ab. Wenn keine "
-"[code]anim[/code] angegeben ist, wird die aktuelle Animation abgespielt."
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid ""
-"The current animation from the [code]frames[/code] resource. If this value "
-"changes, the [code]frame[/code] counter is reset."
-msgstr ""
-"Die aktuelle Animation aus der Ressource [code]frames[/code]. Wenn sich "
-"dieser Wert ändert, wird der [code]frames[/code]-Zähler zurückgesetzt."
-
-#: doc/classes/AnimatedSprite3D.xml
-msgid "The [SpriteFrames] resource containing the animation(s)."
-msgstr "Die [SpriteFrames]-Ressource, welche die Animation(en) enthält."
-
-#: doc/classes/AnimatedTexture.xml
-msgid "Proxy texture for simple frame-based animations."
-msgstr "Proxy-Textur für einfache framebasierte Animationen."
-
-#: doc/classes/AnimatedTexture.xml
-#, fuzzy
-msgid ""
-"[AnimatedTexture] is a resource format for frame-based animations, where "
-"multiple textures can be chained automatically with a predefined delay for "
-"each frame. Unlike [AnimationPlayer] or [AnimatedSprite], it isn't a [Node], "
-"but has the advantage of being usable anywhere a [Texture] resource can be "
-"used, e.g. in a [TileSet].\n"
-"The playback of the animation is controlled by the [member fps] property as "
-"well as each frame's optional delay (see [method set_frame_delay]). The "
-"animation loops, i.e. it will restart at frame 0 automatically after playing "
-"the last frame.\n"
-"[AnimatedTexture] currently requires all frame textures to have the same "
-"size, otherwise the bigger ones will be cropped to match the smallest one.\n"
-"[b]Note:[/b] AnimatedTexture doesn't support using [AtlasTexture]s. Each "
-"frame needs to be a separate [Texture]."
-msgstr ""
-"[AnimatedTexture] ist ein Ressourcenformat für Frame-basierte Animationen, "
-"bei denen mehrere Texturen automatisch mit einer vordefinierten Verzögerung "
-"für jeden Frame verkettet werden können. Im Gegensatz zu [AnimationPlayer] "
-"oder [AnimatedSprite2D] ist es kein [Node], hat aber den Vorteil, dass es "
-"überall verwendet werden kann, wo eine [Texture2D]-Ressource verwendet "
-"werden kann, z. B. in einem [TileSet].\n"
-"Die Wiedergabe der Animation wird durch die [member fps]-Eigenschaft sowie "
-"die optionale Verzögerung jedes Frames gesteuert (siehe [method "
-"set_frame_delay]). Die Animation wird in einer Schleife abgespielt, d. h. "
-"sie beginnt nach dem Abspielen des letzten Bildes automatisch wieder bei "
-"Bild 0.\n"
-"Die [AnimatedTexture] erfordert derzeit, dass alle Frame-Texturen die "
-"gleiche Größe haben, da sonst die größeren Texturen auf die kleinste "
-"zugeschnitten werden. Außerdem unterstützt es nicht [AtlasTexture]. Jeder "
-"Frame muss ein separates Bild sein."
-
-#: doc/classes/AnimatedTexture.xml
-msgid "Returns the given frame's delay value."
-msgstr "Gibt den Verzögerungswert des angegebenen Frames zurück."
-
-#: doc/classes/AnimatedTexture.xml
-#, fuzzy
-msgid "Returns the given frame's [Texture]."
-msgstr "Gibt die [Texture2D] des angegebenen Rahmens zurück."
-
-#: doc/classes/AnimatedTexture.xml
-msgid ""
-"Sets an additional delay (in seconds) between this frame and the next one, "
-"that will be added to the time interval defined by [member fps]. By default, "
-"frames have no delay defined. If a delay value is defined, the final time "
-"interval between this frame and the next will be [code]1.0 / fps + delay[/"
-"code].\n"
-"For example, for an animation with 3 frames, 2 FPS and a frame delay on the "
-"second frame of 1.2, the resulting playback will be:\n"
-"[codeblock]\n"
-"Frame 0: 0.5 s (1 / fps)\n"
-"Frame 1: 1.7 s (1 / fps + 1.2)\n"
-"Frame 2: 0.5 s (1 / fps)\n"
-"Total duration: 2.7 s\n"
-"[/codeblock]"
-msgstr ""
-"Legt eine zusätzliche Verzögerung (in Sekunden) zwischen diesem und dem "
-"nächsten Frame fest, die zu dem durch [member fps] definierten Zeitintervall "
-"hinzugefügt wird. Standardmäßig ist für Frames keine Verzögerung definiert. "
-"Wenn ein Verzögerungswert definiert ist, beträgt das endgültige "
-"Zeitintervall zwischen diesem und dem nächsten Frame [code]1.0 / fps + "
-"delay[/code].\n"
-"Bei einer Animation mit 3 Frames, 2 FPS und einer Frame-Verzögerung auf dem "
-"zweiten Frame von 1,2 ist die resultierende Wiedergabe z. B:\n"
-"[codeblock]\n"
-"Bild 0: 0,5 s (1 / fps)\n"
-"Bild 1: 1,7 s (1 / fps + 1,2)\n"
-"Bild 2: 0,5 s (1 / fps)\n"
-"Gesamtdauer: 2,7 s\n"
-"[/codeblock]"
-
-#: doc/classes/AnimatedTexture.xml
-#, fuzzy
-msgid ""
-"Assigns a [Texture] to the given frame. Frame IDs start at 0, so the first "
-"frame has ID 0, and the last frame of the animation has ID [member frames] - "
-"1.\n"
-"You can define any number of textures up to [constant MAX_FRAMES], but keep "
-"in mind that only frames from 0 to [member frames] - 1 will be part of the "
-"animation."
-msgstr ""
-"Weist dem angegebenen Frame eine [Texture2D] zu. Frame-IDs beginnen bei 0, "
-"also hat das erste Frame die ID 0 und das letzte Frame der Animation die ID "
-"[member frames] - 1.\n"
-"Sie können eine beliebige Anzahl von Texturen bis zur [constant MAX_FRAMES] "
-"definieren, aber beachten Sie, dass nur die Frames von 0 bis [member frames] "
-"- 1 Teil der Animation sein werden."
-
-#: doc/classes/AnimatedTexture.xml
-msgid "Sets the currently visible frame of the texture."
-msgstr "Legt den aktuell sichtbaren Rahmen der Textur fest."
-
-#: doc/classes/AnimatedTexture.xml
-msgid ""
-"Animation speed in frames per second. This value defines the default time "
-"interval between two frames of the animation, and thus the overall duration "
-"of the animation loop based on the [member frames] property. A value of 0 "
-"means no predefined number of frames per second, the animation will play "
-"according to each frame's frame delay (see [method set_frame_delay]).\n"
-"For example, an animation with 8 frames, no frame delay and a [code]fps[/"
-"code] value of 2 will run for 4 seconds, with each frame lasting 0.5 seconds."
-msgstr ""
-"Animationsgeschwindigkeit in Bildern pro Sekunde. Dieser Wert definiert das "
-"Standard-Zeitintervall zwischen zwei Bildern der Animation und damit die "
-"Gesamtdauer der Animationsschleife basierend auf der Eigenschaft [member "
-"frames]. Ein Wert von 0 bedeutet keine vordefinierte Anzahl von Bildern pro "
-"Sekunde, die Animation wird entsprechend der Bildverzögerung jedes Bildes "
-"abgespielt (siehe [method set_frame_delay]).\n"
-"Eine Animation mit 8 Bildern, keiner Bildverzögerung und einem [code]fps[/"
-"code] Wert von 2 läuft beispielsweise 4 Sekunden lang, wobei jedes Bild 0,5 "
-"Sekunden dauert."
-
-#: doc/classes/AnimatedTexture.xml
-msgid ""
-"Number of frames to use in the animation. While you can create the frames "
-"independently with [method set_frame_texture], you need to set this value "
-"for the animation to take new frames into account. The maximum number of "
-"frames is [constant MAX_FRAMES]."
-msgstr ""
-"Anzahl der Frames, die in der Animation verwendet werden sollen. Während Sie "
-"die Frames mit der [method set_frame_texture] selbständig erstellen können, "
-"müssen Sie diesen Wert setzen, damit die Animation neue Frames "
-"berücksichtigt. Die maximale Anzahl der Frames ist [constant MAX_FRAMES]."
-
-#: doc/classes/AnimatedTexture.xml
-msgid ""
-"If [code]true[/code], the animation will only play once and will not loop "
-"back to the first frame after reaching the end. Note that reaching the end "
-"will not set [member pause] to [code]true[/code]."
-msgstr ""
-"Wenn [code]true[/code], wird die Animation nur einmal abgespielt und kehrt "
-"nach Erreichen des Endes nicht zum ersten Bild zurück. Beachten Sie, dass "
-"das Erreichen des Endes nicht dazu führt, dass [member pause] auf "
-"[code]true[/code] gesetzt wird."
-
-#: doc/classes/AnimatedTexture.xml
-msgid ""
-"If [code]true[/code], the animation will pause where it currently is (i.e. "
-"at [member current_frame]). The animation will continue from where it was "
-"paused when changing this property to [code]false[/code]."
-msgstr ""
-"Wenn [code]true[/code], wird die Animation an der Stelle angehalten, an der "
-"sie sich gerade befindet (d. h. bei [member current_frame]). Die Animation "
-"wird an der Stelle fortgesetzt, an der sie angehalten wurde, wenn Sie diese "
-"Eigenschaft auf [code]false[/code] ändern."
-
-#: doc/classes/AnimatedTexture.xml
-#, fuzzy
-msgid ""
-"The maximum number of frames supported by [AnimatedTexture]. If you need "
-"more frames in your animation, use [AnimationPlayer] or [AnimatedSprite]."
-msgstr ""
-"Die maximale Anzahl von Bildern, die von [AnimatedTexture] unterstützt wird. "
-"Wenn Sie mehr Bilder in Ihrer Animation benötigen, verwenden Sie "
-"[AnimationPlayer] oder [AnimatedSprite2D]."
-
-#: doc/classes/Animation.xml
-msgid "Contains data used to animate everything in the engine."
-msgstr "Enthält Daten, mit denen alles in der Engine animiert wird."
-
-#: doc/classes/Animation.xml
-#, fuzzy
-msgid ""
-"An Animation resource contains data used to animate everything in the "
-"engine. Animations are divided into tracks, and each track must be linked to "
-"a node. The state of that node can be changed through time, by adding timed "
-"keys (events) to the track.\n"
-"[codeblock]\n"
-"# This creates an animation that makes the node \"Enemy\" move to the right "
-"by\n"
-"# 100 pixels in 0.5 seconds.\n"
-"var animation = Animation.new()\n"
-"var track_index = animation.add_track(Animation.TYPE_VALUE)\n"
-"animation.track_set_path(track_index, \"Enemy:position:x\")\n"
-"animation.track_insert_key(track_index, 0.0, 0)\n"
-"animation.track_insert_key(track_index, 0.5, 100)\n"
-"[/codeblock]\n"
-"Animations are just data containers, and must be added to nodes such as an "
-"[AnimationPlayer] or [AnimationTreePlayer] to be played back. Animation "
-"tracks have different types, each with its own set of dedicated methods. "
-"Check [enum TrackType] to see available types."
-msgstr ""
-"Eine Animationsressource enthält Daten, mit denen alles in der Engine "
-"animiert werden kann. Animationen sind in Spuren unterteilt, und jede Spur "
-"muss mit einem Knoten verknüpft sein. Der Zustand dieses Knotens kann über "
-"die Zeit geändert werden, indem zeitgesteuerte Tasten (Ereignisse) zur Spur "
-"hinzugefügt werden.\n"
-"[codeblock]\n"
-"# Dies erzeugt eine Animation, die den Knoten \"Feind\" nach rechts um\n"
-"# 100 Pixel in 0,5 Sekunden bewegt.\n"
-"var animation = Animation.new()\n"
-"var spur_index = animation.add_track(Animation.TYPE_VALUE)\n"
-"animation.track_set_path(track_index, \"Feind:Position:x\")\n"
-"animation.track_insert_key(track_index, 0.0, 0)\n"
-"animation.spur_einfuegen_taste(spur_index, 0.5, 100)\n"
-"[/codeblock]\n"
-"Animationen sind nur Datencontainer und müssen zu Knoten wie z. B. einem "
-"[AnimationPlayer] hinzugefügt werden, um abgespielt werden zu können. "
-"Animationsspuren haben verschiedene Typen, jeder mit seinem eigenen Satz an "
-"dedizierten Methoden. Prüfen Sie [enum TrackType], um die verfügbaren Typen "
-"zu sehen."
-
-#: doc/classes/Animation.xml
-msgid "Adds a track to the Animation."
-msgstr "Fügt der Animation eine Spur hinzu."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the animation name at the key identified by [code]key_idx[/code]. "
-"The [code]track_idx[/code] must be the index of an Animation Track."
-msgstr ""
-"Gibt den Animationsnamen an dem durch [code]key_idx[/code] identifizierten "
-"Schlüssel zurück. Die [code]track_idx[/code] muss der Index einer "
-"Animationsspur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Inserts a key with value [code]animation[/code] at the given [code]time[/"
-"code] (in seconds). The [code]track_idx[/code] must be the index of an "
-"Animation Track."
-msgstr ""
-"Fügt einen Schlüssel mit dem Wert [code]animation[/code] zur angegebenen "
-"[code]time[/code] (in Sekunden) ein. Die [code]track_idx[/code] muss der "
-"Index einer Animationsspur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the key identified by [code]key_idx[/code] to value [code]animation[/"
-"code]. The [code]track_idx[/code] must be the index of an Animation Track."
-msgstr ""
-"Setzt den durch [code]key_idx[/code] identifizierten Schlüssel auf den Wert "
-"[code]animation[/code]. Die [code]track_idx[/code] muss der Index einer "
-"Animationsspur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the end offset of the key identified by [code]key_idx[/code]. The "
-"[code]track_idx[/code] must be the index of an Audio Track.\n"
-"End offset is the number of seconds cut off at the ending of the audio "
-"stream."
-msgstr ""
-"Gibt den Endoffset des durch [code]key_idx[/code] identifizierten Schlüssels "
-"zurück. Die [code]track_idx[/code] muss der Index eines Audio-Tracks sein.\n"
-"End-Offset ist die Anzahl der Sekunden, die am Ende des Audio-Streams "
-"abgeschnitten werden."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the start offset of the key identified by [code]key_idx[/code]. The "
-"[code]track_idx[/code] must be the index of an Audio Track.\n"
-"Start offset is the number of seconds cut off at the beginning of the audio "
-"stream."
-msgstr ""
-"Gibt den Startoffset des durch [code]key_idx[/code] identifizierten "
-"Schlüssels zurück. Die [code]track_idx[/code] muss der Index eines Audio-"
-"Tracks sein.\n"
-"Start-Offset ist die Anzahl der Sekunden, die am Anfang des Audio-Streams "
-"abgeschnitten werden."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the audio stream of the key identified by [code]key_idx[/code]. The "
-"[code]track_idx[/code] must be the index of an Audio Track."
-msgstr ""
-"Gibt den Audio-Stream des durch [code]key_idx[/code] identifizierten "
-"Schlüssels zurück. Die [code]track_idx[/code] muss der Index eines Audio-"
-"Tracks sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Inserts an Audio Track key at the given [code]time[/code] in seconds. The "
-"[code]track_idx[/code] must be the index of an Audio Track.\n"
-"[code]stream[/code] is the [AudioStream] resource to play. "
-"[code]start_offset[/code] is the number of seconds cut off at the beginning "
-"of the audio stream, while [code]end_offset[/code] is at the ending."
-msgstr ""
-"Fügt einen Audio-Track-Schlüssel bei der angegebenen [code]Zeit[/code] in "
-"Sekunden ein. Die [code]track_idx[/code] muss der Index eines Audio-Tracks "
-"sein.\n"
-"[code]stream[/code] ist die [AudioStream]-Ressource, die abgespielt werden "
-"soll. [code]start_offset[/code] ist die Anzahl der Sekunden, die am Anfang "
-"des Audio-Streams abgeschnitten werden, während [code]end_offset[/code] am "
-"Ende steht."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the end offset of the key identified by [code]key_idx[/code] to value "
-"[code]offset[/code]. The [code]track_idx[/code] must be the index of an "
-"Audio Track."
-msgstr ""
-"Setzt den Endoffset des durch [code]key_idx[/code] identifizierten "
-"Schlüssels auf den Wert [code]offset[/code]. Die [code]track_idx[/code] muss "
-"der Index eines Audio-Tracks sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the start offset of the key identified by [code]key_idx[/code] to value "
-"[code]offset[/code]. The [code]track_idx[/code] must be the index of an "
-"Audio Track."
-msgstr ""
-"Setzt den Startoffset des durch [code]key_idx[/code] identifizierten "
-"Schlüssels auf den Wert [code]offset[/code]. Die [code]track_idx[/code] muss "
-"der Index eines Audio-Tracks sein."
-
-#: doc/classes/Animation.xml
-#, fuzzy
-msgid ""
-"Sets the stream of the key identified by [code]key_idx[/code] to value "
-"[code]stream[/code]. The [code]track_idx[/code] must be the index of an "
-"Audio Track."
-msgstr ""
-"Setzt den Stream des durch [code]key_idx[/code] identifizierten Schlüssels "
-"auf den Wert [code]offset[/code]. Die [code]track_idx[/code] muss der Index "
-"eines Audio-Tracks sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the in handle of the key identified by [code]key_idx[/code]. The "
-"[code]track_idx[/code] must be the index of a Bezier Track."
-msgstr ""
-"Gibt das In-Handle des durch [code]key_idx[/code] identifizierten Schlüssels "
-"zurück. Die [code]track_idx[/code] muss der Index einer Bezier-Spur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the out handle of the key identified by [code]key_idx[/code]. The "
-"[code]track_idx[/code] must be the index of a Bezier Track."
-msgstr ""
-"Gibt das Out-Handle des durch [code]key_idx[/code] identifizierten "
-"Schlüssels zurück. Die [code]track_idx[/code] muss der Index einer Bezier-"
-"Spur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the value of the key identified by [code]key_idx[/code]. The "
-"[code]track_idx[/code] must be the index of a Bezier Track."
-msgstr ""
-"Gibt den Wert des durch [code]key_idx[/code] identifizierten Schlüssels "
-"zurück. Die [code]track_idx[/code] muss der Index einer Bezier-Spur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Inserts a Bezier Track key at the given [code]time[/code] in seconds. The "
-"[code]track_idx[/code] must be the index of a Bezier Track.\n"
-"[code]in_handle[/code] is the left-side weight of the added Bezier curve "
-"point, [code]out_handle[/code] is the right-side one, while [code]value[/"
-"code] is the actual value at this point."
-msgstr ""
-"Fügt einen Bezier-Track-Schlüssel zur angegebenen [code]Zeit[/code] in "
-"Sekunden ein. Die [code]track_idx[/code] muss der Index einer Bezier-Spur "
-"sein.\n"
-"[code]in_handle[/code] ist die linksseitige Gewichtung des eingefügten "
-"Bezier-Kurvenpunkts, [code]out_handle[/code] die rechtsseitige, während "
-"[code]value[/code] der aktuelle Wert an diesem Punkt ist."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the interpolated value at the given [code]time[/code] (in seconds). "
-"The [code]track_idx[/code] must be the index of a Bezier Track."
-msgstr ""
-"Gibt den interpolierten Wert zur angegebenen [code]time[/code] (in Sekunden) "
-"zurück. Die [code]track_idx[/code] muss der Index einer Bezier-Spur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the in handle of the key identified by [code]key_idx[/code] to value "
-"[code]in_handle[/code]. The [code]track_idx[/code] must be the index of a "
-"Bezier Track."
-msgstr ""
-"Setzt das In-Handle des durch [code]key_idx[/code] identifizierten "
-"Schlüssels auf den Wert [code]in_handle[/code]. Die [code]track_idx[/code] "
-"muss der Index einer Bezier-Spur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the out handle of the key identified by [code]key_idx[/code] to value "
-"[code]out_handle[/code]. The [code]track_idx[/code] must be the index of a "
-"Bezier Track."
-msgstr ""
-"Setzt das Out-Handle des durch [code]key_idx[/code] identifizierten "
-"Schlüssels auf den Wert [code]out_handle[/code]. Die [code]track_idx[/code] "
-"muss der Index einer Bezier-Spur sein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the value of the key identified by [code]key_idx[/code] to the given "
-"value. The [code]track_idx[/code] must be the index of a Bezier Track."
-msgstr ""
-"Setzt den Wert des durch [code]key_idx[/code] identifizierten Schlüssels auf "
-"den angegebenen Wert. Die [code]track_idx[/code] muss der Index einer Bezier-"
-"Spur sein."
-
-#: doc/classes/Animation.xml
-msgid "Clear the animation (clear all tracks and reset all)."
-msgstr ""
-"Löschen Sie die Animation (löschen Sie alle Spuren und setzen Sie alle "
-"zurück)."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Adds a new track that is a copy of the given track from [code]to_animation[/"
-"code]."
-msgstr ""
-"Fügt eine neue Spur hinzu, die eine Kopie der angegebenen Spur aus "
-"[code]to_animation[/code] ist."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the index of the specified track. If the track is not found, return "
-"-1."
-msgstr ""
-"Gibt den Index der angegebenen Spur zurück. Wenn die Spur nicht gefunden "
-"ist, wird -1 zurückgegeben."
-
-#: doc/classes/Animation.xml
-msgid "Returns the amount of tracks in the animation."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns all the key indices of a method track, given a position and delta "
-"time."
-msgstr ""
-"Liefert alle Schlüsselindizes eines Methoden-Tracks, gegeben eine Position "
-"und eine Delta-Zeit."
-
-#: doc/classes/Animation.xml
-msgid "Returns the method name of a method track."
-msgstr "Gibt den Methodennamen einer Methodenspur zurück."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the arguments values to be called on a method track for a given key "
-"in a given track."
-msgstr ""
-"Gibt die Werte der Argumente zurück, die auf einer Methodenspur für einen "
-"gegebenen Schlüssel in einer gegebenen Spur aufgerufen werden sollen."
-
-#: doc/classes/Animation.xml
-msgid "Removes a track by specifying the track index."
-msgstr "Entfernt eine Spur durch Angabe des Spurindexes."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Finds the key index by time in a given track. Optionally, only find it if "
-"the exact time is given."
-msgstr ""
-"Findet den Tastenindex nach Zeit in einer gegebenen Spur. Findet ihn "
-"optional nur, wenn die genaue Zeit angegeben ist."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns [code]true[/code] if the track at [code]idx[/code] wraps the "
-"interpolation loop. New tracks wrap the interpolation loop by default."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur an [code]idx[/code] die "
-"Interpolationsschleife umschließt. Neue Spuren umschließen die "
-"Interpolationsschleife standardmäßig."
-
-#: doc/classes/Animation.xml
-msgid "Returns the interpolation type of a given track."
-msgstr "Gibt den Interpolationstyp einer gegebenen Spur zurück."
-
-#: doc/classes/Animation.xml
-msgid "Returns the amount of keys in a given track."
-msgstr "Gibt die Anzahl der Tasten in einer bestimmten Spur zurück."
-
-#: doc/classes/Animation.xml
-msgid "Returns the time at which the key is located."
-msgstr "Gibt die Uhrzeit zurück, zu der sich der Schlüssel befindet."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the transition curve (easing) for a specific key (see the built-in "
-"math function [method @GDScript.ease])."
-msgstr ""
-"Liefert die Übergangskurve (Easing) für eine bestimmte Taste (siehe die "
-"eingebaute Mathematikfunktion [method @GDScript.ease])."
-
-#: doc/classes/Animation.xml
-msgid "Returns the value of a given key in a given track."
-msgstr ""
-"Gibt den Wert eines gegebenen Schlüssels in einer gegebenen Spur zurück."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Gets the path of a track. For more information on the path format, see "
-"[method track_set_path]."
-msgstr ""
-"Ruft den Pfad eines Tracks ab. Weitere Informationen zum Pfadformat finden "
-"Sie in [method track_set_path]."
-
-#: doc/classes/Animation.xml
-msgid "Gets the type of a track."
-msgstr "Ruft den Typ einer Spur ab."
-
-#: doc/classes/Animation.xml
-msgid "Insert a generic key in a given track."
-msgstr "Einfügen einer generischen Taste in eine bestimmte Spur."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns [code]true[/code] if the track at index [code]idx[/code] is enabled."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur bei Index [code]idx[/code] "
-"aktiviert ist."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns [code]true[/code] if the given track is imported. Else, return "
-"[code]false[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der angegebene Track importiert ist. "
-"Andernfalls wird [code]false[/code] zurückgegeben."
-
-#: doc/classes/Animation.xml
-msgid "Moves a track down."
-msgstr "Verschiebt eine Spur nach unten."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Changes the index position of track [code]idx[/code] to the one defined in "
-"[code]to_idx[/code]."
-msgstr ""
-"Ändert die Indexposition der Spur [code]idx[/code] auf die in [code]to_idx[/"
-"code] definierte."
-
-#: doc/classes/Animation.xml
-msgid "Moves a track up."
-msgstr "Verschiebt eine Spur nach oben."
-
-#: doc/classes/Animation.xml
-msgid "Removes a key by index in a given track."
-msgstr "Entfernt einen Schlüssel nach Index in einer bestimmten Spur."
-
-#: doc/classes/Animation.xml
-msgid "Removes a key by position (seconds) in a given track."
-msgstr "Entfernt eine Taste nach Position (Sekunden) in einer bestimmten Spur."
-
-#: doc/classes/Animation.xml
-msgid "Enables/disables the given track. Tracks are enabled by default."
-msgstr ""
-"Aktiviert/deaktiviert die angegebene Spur. Tracks sind standardmäßig "
-"aktiviert."
-
-#: doc/classes/Animation.xml
-msgid "Sets the given track as imported or not."
-msgstr "Legt die angegebene Spur als importiert oder nicht importiert fest."
-
-#: doc/classes/Animation.xml
-msgid ""
-"If [code]true[/code], the track at [code]idx[/code] wraps the interpolation "
-"loop."
-msgstr ""
-"Wenn [code]true[/code], umschließt die Spur an [code]idx[/code] die "
-"Interpolationsschleife."
-
-#: doc/classes/Animation.xml
-msgid "Sets the interpolation type of a given track."
-msgstr "Legt den Interpolationstyp einer bestimmten Spur fest."
-
-#: doc/classes/Animation.xml
-msgid "Sets the time of an existing key."
-msgstr "Setzt die Zeit eines vorhandenen Schlüssels."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Sets the transition curve (easing) for a specific key (see the built-in math "
-"function [method @GDScript.ease])."
-msgstr ""
-"Setzt die Übergangskurve (Easing) für eine bestimmte Taste (siehe die "
-"eingebaute Mathematikfunktion [method @GDScript.ease])."
-
-#: doc/classes/Animation.xml
-msgid "Sets the value of an existing key."
-msgstr "Setzt den Wert eines vorhandenen Schlüssels."
-
-#: doc/classes/Animation.xml
-#, fuzzy
-msgid ""
-"Sets the path of a track. Paths must be valid scene-tree paths to a node and "
-"must be specified starting from the parent node of the node that will "
-"reproduce the animation. Tracks that control properties or bones must append "
-"their name after the path, separated by [code]\":\"[/code].\n"
-"For example, [code]\"character/skeleton:ankle\"[/code] or [code]\"character/"
-"mesh:transform/local\"[/code]."
-msgstr ""
-"Legt den Pfad einer Spur fest. Pfade müssen gültige Szenenbaumpfade zu einem "
-"Knoten sein und müssen ausgehend vom übergeordneten Knoten des Knotens, der "
-"die Animation wiedergeben wird, angegeben werden. Spuren, die Eigenschaften "
-"oder Bones steuern, müssen ihren Namen nach dem Pfad anhängen, getrennt "
-"durch [code]\":\"[/code].\n"
-"Beispiel: [code]\"character/skeleton:ankle\"[/code] oder [code]\"character/"
-"mesh:transform/local\"[/code]."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Swaps the track [code]idx[/code]'s index position with the track "
-"[code]with_idx[/code]."
-msgstr ""
-"Vertauscht die Indexposition der Spur [code]idx[/code] mit der Spur "
-"[code]mit_idx[/code]."
-
-#: doc/classes/Animation.xml
-msgid "Insert a transform key for a transform track."
-msgstr ""
-"Fügen Sie eine Transformations-Taste für eine Transformations-Spur ein."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns the interpolated value of a transform track at a given time (in "
-"seconds). An array consisting of 3 elements: position ([Vector3]), rotation "
-"([Quat]) and scale ([Vector3])."
-msgstr ""
-"Liefert den interpolierten Wert einer Transformations-Spur zu einem "
-"bestimmten Zeitpunkt (in Sekunden). Ein Array bestehend aus 3 Elementen: "
-"Position ([Vector3]), Rotation ([Quat]) und Scale ([Vector3])."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Returns all the key indices of a value track, given a position and delta "
-"time."
-msgstr ""
-"Liefert alle Schlüsselindizes einer Wertespur, gegeben eine Position und "
-"eine Deltazeit."
-
-#: doc/classes/Animation.xml
-msgid "Returns the update mode of a value track."
-msgstr "Gibt den Aktualisierungsmodus einer Wertespur zurück."
-
-#: doc/classes/Animation.xml
-#, fuzzy
-msgid ""
-"Returns the interpolated value at the given time (in seconds). The "
-"[code]track_idx[/code] must be the index of a value track."
-msgstr ""
-"Gibt den interpolierten Wert zur angegebenen [code]time[/code] (in Sekunden) "
-"zurück. Die [code]track_idx[/code] muss der Index einer Bezier-Spur sein."
-
-#: doc/classes/Animation.xml
-msgid "Sets the update mode (see [enum UpdateMode]) of a value track."
-msgstr ""
-"Legt den Aktualisierungsmodus (siehe [enum UpdateMode]) einer Wertespur fest."
-
-#: doc/classes/Animation.xml
-msgid ""
-"The total length of the animation (in seconds).\n"
-"[b]Note:[/b] Length is not delimited by the last key, as this one may be "
-"before or after the end to ensure correct interpolation and looping."
-msgstr ""
-"Die Gesamtlänge der Animation (in Sekunden).\n"
-"[b]Hinweis:[/b] Die Länge wird nicht durch die letzte Taste begrenzt, da "
-"diese vor oder nach dem Ende liegen kann, um eine korrekte Interpolation und "
-"Schleifenbildung zu gewährleisten."
-
-#: doc/classes/Animation.xml
-#, fuzzy
-msgid ""
-"A flag indicating that the animation must loop. This is used for correct "
-"interpolation of animation cycles, and for hinting the player that it must "
-"restart the animation."
-msgstr ""
-"Ein Flag, das anzeigt, dass die Animation in einer Schleife laufen muss. "
-"Dies wird für die korrekte Interpolation von Animationszyklen und für den "
-"Hinweis an den Spieler verwendet, dass er die Animation neu starten muss."
-
-#: doc/classes/Animation.xml
-msgid "The animation step value."
-msgstr "Der Animationsschrittwert."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Emitted when there's a change in the list of tracks, e.g. tracks are added, "
-"moved or have changed paths."
-msgstr ""
-"Wird ausgegeben, wenn es eine Änderung in der Liste der Spuren gibt, z. B. "
-"wenn Spuren hinzugefügt, verschoben oder Pfade geändert wurden."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Value tracks set values in node properties, but only those which can be "
-"Interpolated."
-msgstr ""
-"Value verfolgt eingestellte Werte in Knoteneigenschaften, aber nur solche, "
-"die interpoliert werden können."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Transform tracks are used to change node local transforms or skeleton pose "
-"bones. Transitions are interpolated."
-msgstr ""
-"Transformationsspuren werden verwendet, um lokale Transformationen von "
-"Knoten oder Pose-Bones des Skeletts zu ändern. Übergänge werden interpoliert."
-
-#: doc/classes/Animation.xml
-msgid "Method tracks call functions with given arguments per key."
-msgstr ""
-"Methode verfolgt den Aufruf von Funktionen mit gegebenen Argumenten pro "
-"Taste."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Bezier tracks are used to interpolate a value using custom curves. They can "
-"also be used to animate sub-properties of vectors and colors (e.g. alpha "
-"value of a [Color])."
-msgstr ""
-"Bezier-Spuren werden verwendet, um einen Wert mithilfe von "
-"benutzerdefinierten Kurven zu interpolieren. Sie können auch verwendet "
-"werden, um Untereigenschaften von Vektoren und Farben zu animieren (z. B. "
-"den Alphawert einer [Color])."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Audio tracks are used to play an audio stream with either type of "
-"[AudioStreamPlayer]. The stream can be trimmed and previewed in the "
-"animation."
-msgstr ""
-"Audiospuren werden verwendet, um einen Audiostream mit einem der beiden "
-"Typen von [AudioStreamPlayer] abzuspielen. Der Stream kann in der Animation "
-"getrimmt und als Vorschau angezeigt werden."
-
-#: doc/classes/Animation.xml
-msgid "Animation tracks play animations in other [AnimationPlayer] nodes."
-msgstr ""
-"Animationsspuren spielen Animationen in anderen [AnimationPlayer]-Knoten ab."
-
-#: doc/classes/Animation.xml
-msgid "No interpolation (nearest value)."
-msgstr "Keine Interpolation (nächstgelegener Wert)."
-
-#: doc/classes/Animation.xml doc/classes/Gradient.xml
-msgid "Linear interpolation."
-msgstr "lineare Interpolation."
-
-#: doc/classes/Animation.xml doc/classes/Gradient.xml
-msgid "Cubic interpolation."
-msgstr "Kubische Interpolation."
-
-#: doc/classes/Animation.xml
-msgid "Update between keyframes."
-msgstr "Aktualisierung zwischen Keyframes."
-
-#: doc/classes/Animation.xml
-msgid "Update at the keyframes and hold the value."
-msgstr "Aktualisieren Sie an den Keyframes und halten Sie den Wert."
-
-#: doc/classes/Animation.xml
-msgid "Update at the keyframes."
-msgstr "Aktualisierung an den Keyframes."
-
-#: doc/classes/Animation.xml
-msgid ""
-"Same as linear interpolation, but also interpolates from the current value "
-"(i.e. dynamically at runtime) if the first key isn't at 0 seconds."
-msgstr ""
-"Wie lineare Interpolation, interpoliert aber zusätzlich vom aktuellen Wert "
-"aus (d.h. dynamisch zur Laufzeit), wenn der erste Schlüssel nicht auf 0 "
-"Sekunden steht."
-
-#: doc/classes/AnimationNode.xml
-msgid "Base resource for [AnimationTree] nodes."
-msgstr "Basisressource für [AnimationTree]-Knoten."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Base resource for [AnimationTree] nodes. In general, it's not used directly, "
-"but you can create custom ones with custom blending formulas.\n"
-"Inherit this when creating nodes mainly for use in [AnimationNodeBlendTree], "
-"otherwise [AnimationRootNode] should be used instead."
-msgstr ""
-"Basisressource für [AnimationTree]-Knoten. Im Allgemeinen wird sie nicht "
-"direkt verwendet, aber Sie können benutzerdefinierte mit eigenen "
-"Überblendungsformeln erstellen.\n"
-"Vererben Sie dies, wenn Sie Knoten hauptsächlich für die Verwendung in "
-"[AnimationNodeBlendTree] erstellen, andernfalls sollte stattdessen "
-"[AnimationRootNode] verwendet werden."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Adds an input to the node. This is only useful for nodes created for use in "
-"an [AnimationNodeBlendTree]."
-msgstr ""
-"Fügt dem Knoten einen Eingang hinzu. Dies ist nur für Knoten nützlich, die "
-"zur Verwendung in einem [AnimationNodeBlendTree] erstellt wurden."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Blend an animation by [code]blend[/code] amount (name must be valid in the "
-"linked [AnimationPlayer]). A [code]time[/code] and [code]delta[/code] may be "
-"passed, as well as whether [code]seek[/code] happened."
-msgstr ""
-"Überblendet eine Animation um den Betrag [code]blend[/code] (Name muss im "
-"verknüpften [AnimationPlayer] gültig sein). Es kann eine [code]time[/code] "
-"und [code]delta[/code] übergeben werden, sowie ob [code]seek[/code] passiert "
-"ist."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Blend an input. This is only useful for nodes created for an "
-"[AnimationNodeBlendTree]. The [code]time[/code] parameter is a relative "
-"delta, unless [code]seek[/code] is [code]true[/code], in which case it is "
-"absolute. A filter mode may be optionally passed (see [enum FilterAction] "
-"for options)."
-msgstr ""
-"Überblendet einen Eingang. Dies ist nur für Knoten nützlich, die für einen "
-"[AnimationNodeBlendTree] erstellt wurden. Der Parameter [code]time[/code] "
-"ist ein relatives Delta, es sei denn, [code]seek[/code] ist [code]true[/"
-"code], in diesem Fall ist er absolut. Ein Filtermodus kann optional "
-"übergeben werden (siehe [enum FilterAction] für Optionen)."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Blend another animation node (in case this node contains children animation "
-"nodes). This function is only useful if you inherit from [AnimationRootNode] "
-"instead, else editors will not display your node for addition."
-msgstr ""
-"Verschmelzen Sie einen anderen Animationsknoten (falls dieser Knoten "
-"untergeordnete Animationsknoten enthält). Diese Funktion ist nur nützlich, "
-"wenn Sie stattdessen von [AnimationRootNode] erben, da die Editoren Ihren "
-"Knoten nicht zur Addition anzeigen."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"override the text caption for this node."
-msgstr ""
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"return a child node by its [code]name[/code]."
-msgstr ""
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"return all children nodes in order as a [code]name: node[/code] dictionary."
-msgstr ""
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Amount of inputs in this node, only useful for nodes that go into "
-"[AnimationNodeBlendTree]."
-msgstr ""
-"Anzahl der Eingänge in der Node, nur nützlich für Knoten, die in "
-"[AnimationNodeBlendTree] gehen."
-
-#: doc/classes/AnimationNode.xml
-msgid "Gets the name of an input by index."
-msgstr "Ruft den Namen eines Eingangs nach Index ab."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Gets the value of a parameter. Parameters are custom local memory used for "
-"your nodes, given a resource can be reused in multiple trees."
-msgstr ""
-"Ruft den Wert eines Parameters ab. Parameter sind benutzerdefinierte lokale "
-"Speicher, die für Ihre Nodes verwendet werden, da eine Ressource in mehreren "
-"Bäumen wiederverwendet werden kann."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"return the default value of parameter \"[code]name[/code]\". Parameters are "
-"custom local memory used for your nodes, given a resource can be reused in "
-"multiple trees."
-msgstr ""
-"Ruft den Standardwert eines Parameters ab. Parameter sind benutzerdefinierte "
-"lokale Speicher, die für Ihre Knoten verwendet werden, da eine Ressource in "
-"mehreren Bäumen wiederverwendet werden kann."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"return a list of the properties on this node. Parameters are custom local "
-"memory used for your nodes, given a resource can be reused in multiple "
-"trees. Format is similar to [method Object.get_property_list]."
-msgstr ""
-"Ruft die Eigenschaftsinformationen für Parameter ab. Parameter sind "
-"benutzerdefinierter lokaler Speicher, der für Ihre Nodes verwendet wird, da "
-"eine Ressource in mehreren Bäumen wiederverwendet werden kann. Das Format "
-"ist ähnlich wie bei [method Object.get_property_list]."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"return whether the blend tree editor should display filter editing on this "
-"node."
-msgstr ""
-"Gibt [code]true[/code] zurück, ob der Mischbaum-Editor die Filterbearbeitung "
-"an diesem Node anzeigen soll."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid "Returns whether the given path is filtered."
-msgstr "Gibt [code]true[/code] zurück, ob ein gegebener Pfad gefiltert ist."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid ""
-"When inheriting from [AnimationRootNode], implement this virtual method to "
-"run some code when this node is processed. The [code]time[/code] parameter "
-"is a relative delta, unless [code]seek[/code] is [code]true[/code], in which "
-"case it is absolute.\n"
-"Here, call the [method blend_input], [method blend_node] or [method "
-"blend_animation] functions. You can also use [method get_parameter] and "
-"[method set_parameter] to modify local memory.\n"
-"This function should return the time left for the current animation to "
-"finish (if unsure, pass the value from the main blend being called)."
-msgstr ""
-"Benutzerdefinierter Callback, der aufgerufen wird, wenn ein "
-"benutzerdefinierter Node verarbeitet wird. Der Parameter [code]time[/code] "
-"ist ein relatives Delta, es sei denn, [code]seek[/code] ist [code]true[/"
-"code], in diesem Fall ist es absolut.\n"
-"Rufen Sie hier die Funktionen [method blend_input], [method blend_node] oder "
-"[method blend_animation] auf. Sie können auch [method get_parameter] und "
-"[method set_parameter] verwenden, um den lokalen Speicher zu verändern.\n"
-"Diese Funktion sollte die verbleibende Zeit bis zum Ende der aktuellen "
-"Animation zurückgeben (wenn Sie unsicher sind, übergeben Sie den Wert aus "
-"der aufgerufenen Hauptmischung)."
-
-#: doc/classes/AnimationNode.xml
-msgid "Removes an input, call this only when inactive."
-msgstr "Entfernt einen Eingang, rufen Sie dies nur bei Inaktivität auf."
-
-#: doc/classes/AnimationNode.xml
-msgid "Adds or removes a path for the filter."
-msgstr "Fügt einen Pfad für den Filter hinzu oder entfernt ihn."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid ""
-"Sets a custom parameter. These are used as local memory, because resources "
-"can be reused across the tree or scenes."
-msgstr ""
-"Setzt einen benutzerdefinierten Parameter. Diese werden als lokaler Speicher "
-"verwendet, da Ressourcen über den Baum oder die Szenen hinweg "
-"wiederverwendet werden können."
-
-#: doc/classes/AnimationNode.xml
-msgid "If [code]true[/code], filtering is enabled."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/AnimationNode.xml
-#, fuzzy
-msgid "Emitted when the node was removed from the graph."
-msgstr "Wird aufgerufen, wenn das Node aus dem Graphen entfernt wurde."
-
-#: doc/classes/AnimationNode.xml
-msgid ""
-"Emitted by nodes that inherit from this class and that have an internal tree "
-"when one of their nodes changes. The nodes that emit this signal are "
-"[AnimationNodeBlendSpace1D], [AnimationNodeBlendSpace2D], "
-"[AnimationNodeStateMachine], and [AnimationNodeBlendTree]."
-msgstr ""
-"Wird von Knoten ausgesendet, die von dieser Klasse erben und die einen "
-"internen Baum haben, wenn sich einer ihrer Nodes ändert. Die Nodes, die "
-"dieses Signal aussenden, sind [AnimationNodeBlendSpace1D], "
-"[AnimationNodeBlendSpace2D], [AnimationNodeStateMachine] und "
-"[AnimationNodeBlendTree]."
-
-#: doc/classes/AnimationNode.xml
-msgid "Do not use filtering."
-msgstr "Verwenden Sie keine Filterung."
-
-#: doc/classes/AnimationNode.xml
-msgid "Paths matching the filter will be allowed to pass."
-msgstr "Pfade, die dem Filter entsprechen, werden durchgelassen."
-
-#: doc/classes/AnimationNode.xml
-msgid "Paths matching the filter will be discarded."
-msgstr "Pfade, die dem Filter entsprechen, werden verworfen."
-
-#: doc/classes/AnimationNode.xml
-msgid "Paths matching the filter will be blended (by the blend value)."
-msgstr ""
-"Pfade, die dem Filter entsprechen, werden überblendet (um den "
-"Überblendungswert)."
-
-#: doc/classes/AnimationNodeAdd2.xml
-msgid "Blends two animations additively inside of an [AnimationNodeBlendTree]."
-msgstr ""
-"Blendet zwei Animationen additiv innerhalb eines [AnimationNodeBlendTree] "
-"ein."
-
-#: doc/classes/AnimationNodeAdd2.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree]. Blends two animations "
-"additively based on an amount value in the [code][0.0, 1.0][/code] range."
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree]. Blendet "
-"zwei Animationen additiv basierend auf einem Betragswert im Bereich [code]"
-"[0.0, 1.0][/code]."
-
-#: doc/classes/AnimationNodeAdd2.xml doc/classes/AnimationNodeAdd3.xml
-#: doc/classes/AnimationNodeBlend2.xml doc/classes/AnimationNodeBlend3.xml
-msgid ""
-"If [code]true[/code], sets the [code]optimization[/code] to [code]false[/"
-"code] when calling [method AnimationNode.blend_input], forcing the blended "
-"animations to update every frame."
-msgstr ""
-"Wenn [code]wahr[/code], wird beim Aufruf der [method AnimationNode."
-"blend_input] die [code]Optimierung[/code] auf [code]falsch[/code] gesetzt, "
-"wodurch die überblendeten Animationen gezwungen werden, jeden Frame zu "
-"aktualisieren."
-
-#: doc/classes/AnimationNodeAdd3.xml
-msgid ""
-"Blends two of three animations additively inside of an "
-"[AnimationNodeBlendTree]."
-msgstr ""
-"Blendet zwei von drei Animationen additiv innerhalb eines "
-"[AnimationNodeBlendTree] ein."
-
-#: doc/classes/AnimationNodeAdd3.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree]. Blends two animations "
-"together additively out of three based on a value in the [code][-1.0, 1.0][/"
-"code] range.\n"
-"This node has three inputs:\n"
-"- The base animation to add to\n"
-"- A -add animation to blend with when the blend amount is in the [code]"
-"[-1.0, 0.0][/code] range.\n"
-"- A +add animation to blend with when the blend amount is in the [code][0.0, "
-"1.0][/code] range"
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree]. Blendet "
-"zwei Animationen additiv aus drei basierend auf einem Wert im Bereich [code]"
-"[-1.0, 1.0][/code] zusammen.\n"
-"Dieses Node hat drei Eingänge:\n"
-"- Die Basisanimation, zu der addiert werden soll\n"
-"- Eine -Add-Animation, mit der überblendet wird, wenn der Überblendungswert "
-"im Bereich [code][-1.0, 0.0][/code] liegt.\n"
-"- Eine +Add-Animation, mit der überblendet werden soll, wenn der "
-"Überblendungswert im Bereich [code][0.0, 1.0][/code] liegt"
-
-#: doc/classes/AnimationNodeAdd3.xml doc/classes/AnimationNodeAnimation.xml
-#: doc/classes/AnimationNodeBlend2.xml
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-#: doc/classes/AnimationNodeOneShot.xml doc/classes/AnimationNodeOutput.xml
-#: doc/classes/AnimationNodeTimeScale.xml
-#: doc/classes/AnimationNodeTransition.xml
-msgid "AnimationTree"
-msgstr "AnimationTree"
-
-#: doc/classes/AnimationNodeAdd3.xml doc/classes/AnimationNodeAnimation.xml
-#: doc/classes/AnimationNodeBlend2.xml
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-#: doc/classes/AnimationNodeOneShot.xml doc/classes/AnimationNodeOutput.xml
-#: doc/classes/AnimationNodeTransition.xml doc/classes/AnimationPlayer.xml
-#: doc/classes/AnimationTree.xml doc/classes/AudioEffectReverb.xml
-#: doc/classes/Camera.xml doc/classes/CollisionShape.xml
-#: doc/classes/CylinderShape.xml doc/classes/Environment.xml
-#: doc/classes/GIProbe.xml doc/classes/GIProbeData.xml
-#: doc/classes/KinematicBody.xml doc/classes/Light.xml doc/classes/Material.xml
-#: doc/classes/Mesh.xml doc/classes/MeshInstance.xml doc/classes/Particles.xml
-#: doc/classes/Quat.xml doc/classes/Skeleton.xml doc/classes/SpotLight.xml
-#: doc/classes/StaticBody.xml doc/classes/WorldEnvironment.xml
-msgid "Third Person Shooter Demo"
-msgstr "Third Person Shooter Demo"
-
-#: doc/classes/AnimationNodeAnimation.xml
-msgid "Input animation to use in an [AnimationNodeBlendTree]."
-msgstr "Eingangsanimation zur Verwendung in einem [AnimationNodeBlendTree]."
-
-#: doc/classes/AnimationNodeAnimation.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree]. Only features one output "
-"set using the [member animation] property. Use it as an input for "
-"[AnimationNode] that blend animations together."
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree]. Verfügt nur "
-"über einen Ausgang, der über die Eigenschaft [member animation] festgelegt "
-"wird. Verwenden Sie sie als Eingabe für [AnimationNode], die Animationen "
-"zusammenmischen."
-
-#: doc/classes/AnimationNodeAnimation.xml doc/classes/AnimationNodeBlend2.xml
-#: doc/classes/AnimationNodeOutput.xml doc/classes/AnimationNodeTimeScale.xml
-#: doc/classes/AnimationNodeTransition.xml doc/classes/Area.xml
-#: doc/classes/Basis.xml doc/classes/BoxShape.xml
-#: doc/classes/CollisionShape.xml modules/gridmap/doc_classes/GridMap.xml
-#: doc/classes/KinematicBody.xml doc/classes/Mesh.xml
-#: doc/classes/MeshInstance.xml doc/classes/MeshLibrary.xml
-#: doc/classes/ProjectSettings.xml doc/classes/Transform.xml
-msgid "3D Platformer Demo"
-msgstr "3D Platformer Demo"
-
-#: doc/classes/AnimationNodeAnimation.xml
-msgid ""
-"Animation to use as an output. It is one of the animations provided by "
-"[member AnimationTree.anim_player]."
-msgstr ""
-"Animation, die als Ausgabe verwendet werden soll. Es ist eine der "
-"Animationen, die von [member AnimationTree.anim_player] bereitgestellt "
-"werden."
-
-#: doc/classes/AnimationNodeBlend2.xml
-msgid "Blends two animations linearly inside of an [AnimationNodeBlendTree]."
-msgstr ""
-"Blendet zwei Animationen linear innerhalb eines [AnimationNodeBlendTree] ein."
-
-#: doc/classes/AnimationNodeBlend2.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree]. Blends two animations "
-"linearly based on an amount value in the [code][0.0, 1.0][/code] range."
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree]. Blendet "
-"zwei Animationen linear basierend auf einem Betragswert im Bereich [code]"
-"[0.0, 1.0][/code]."
-
-#: doc/classes/AnimationNodeBlend3.xml
-msgid ""
-"Blends two of three animations linearly inside of an "
-"[AnimationNodeBlendTree]."
-msgstr ""
-"Blendet zwei von drei Animationen linear innerhalb eines "
-"[AnimationNodeBlendTree] ein."
-
-#: doc/classes/AnimationNodeBlend3.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree]. Blends two animations "
-"together linearly out of three based on a value in the [code][-1.0, 1.0][/"
-"code] range.\n"
-"This node has three inputs:\n"
-"- The base animation\n"
-"- A -blend animation to blend with when the blend amount is in the [code]"
-"[-1.0, 0.0][/code] range.\n"
-"- A +blend animation to blend with when the blend amount is in the [code]"
-"[0.0, 1.0][/code] range"
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree]. Blendet "
-"zwei Animationen linear aus drei basierend auf einem Wert im Bereich [code]"
-"[-1.0, 1.0][/code] zusammen.\n"
-"Dieses Node hat drei Eingänge:\n"
-"- Die Basisanimation\n"
-"- Eine -Überblendanimation, mit der überblendet wird, wenn der "
-"Überblendungswert im Bereich [code][-1.0, 0.0][/code] liegt.\n"
-"- Eine +Überblendanimation, mit der überblendet wird, wenn der "
-"Überblendungswert im Bereich [code][0.0, 1.0][/code] liegt"
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid ""
-"Blends linearly between two of any number of [AnimationNode] of any type "
-"placed on a virtual axis."
-msgstr ""
-"Blendet linear zwischen zwei oder einer beliebigen Anzahl von "
-"[AnimationNode] eines beliebigen Typs, die auf einer virtuellen Achse "
-"platziert sind."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree].\n"
-"This is a virtual axis on which you can add any type of [AnimationNode] "
-"using [method add_blend_point].\n"
-"Outputs the linear blend of the two [AnimationNode]s closest to the node's "
-"current value.\n"
-"You can set the extents of the axis using the [member min_space] and [member "
-"max_space]."
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree].\n"
-"Dies ist eine virtuelle Achse, auf der Sie jeden Typ von [AnimationNode] mit "
-"der [method add_blend_point] hinzufügen können.\n"
-"Gibt die lineare Überblendung der beiden [AnimationNode]s aus, die dem "
-"aktuellen Wert des Nodes am nächsten sind.\n"
-"Sie können die Ausmaße der Achse mit dem [member min_space] und [member "
-"max_space] einstellen."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid ""
-"Adds a new point that represents a [code]node[/code] on the virtual axis at "
-"a given position set by [code]pos[/code]. You can insert it at a specific "
-"index using the [code]at_index[/code] argument. If you use the default value "
-"for [code]at_index[/code], the point is inserted at the end of the blend "
-"points array."
-msgstr ""
-"Fügt einen neuen Punkt ein, der einen [code]Node[/code] auf der virtuellen "
-"Achse an einer bestimmten, mit [code]pos[/code] festgelegten Position "
-"darstellt. Sie können ihn mit dem Argument [code]at_index[/code] an einem "
-"bestimmten Index einfügen. Wenn Sie den Standardwert für [code]at_index[/"
-"code] verwenden, wird der Punkt am Ende des Überblendungspunkt-Arrays "
-"eingefügt."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid "Returns the number of points on the blend axis."
-msgstr "Gibt die Anzahl der Punkte auf der Blend-Achse zurück."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid ""
-"Returns the [AnimationNode] referenced by the point at index [code]point[/"
-"code]."
-msgstr ""
-"Gibt den [AnimationNode] zurück, auf den der Punkt am Index [code]point[/"
-"code] verweist."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Returns the position of the point at index [code]point[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid "Removes the point at index [code]point[/code] from the blend axis."
-msgstr ""
-"Entfernt den Punkt bei Index [code]Punkt[/code] von der Überblendachse."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Changes the [AnimationNode] referenced by the point at index [code]point[/"
-"code]."
-msgstr ""
-"Ändert den [AnimationNode], der von dem Punkt bei Index [code]Punkt[/code] "
-"referenziert wird."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Updates the position of the point at index [code]point[/code] on the blend "
-"axis."
-msgstr ""
-"Aktualisiert die Position des Punktes bei Index [code]Punkt[/code] auf der "
-"Blend-Achse."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid ""
-"The blend space's axis's upper limit for the points' position. See [method "
-"add_blend_point]."
-msgstr ""
-"Die obere Grenze der Achse des Blend Space für die Position der Punkte. "
-"Siehe [method add_blend_point]."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid ""
-"The blend space's axis's lower limit for the points' position. See [method "
-"add_blend_point]."
-msgstr ""
-"Die untere Grenze der Achse des Blend Space für die Position der Punkte. "
-"Siehe [method add_blend_point]."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid "Position increment to snap to when moving a point on the axis."
-msgstr ""
-"Positionsinkrement, auf das gefangen werden soll, wenn ein Punkt auf der "
-"Achse bewegt wird."
-
-#: doc/classes/AnimationNodeBlendSpace1D.xml
-msgid "Label of the virtual axis of the blend space."
-msgstr "Beschriftung der virtuellen Achse des Mischraums."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Blends linearly between three [AnimationNode] of any type placed in a 2D "
-"space."
-msgstr ""
-"Blendet linear zwischen drei [AnimationNode] eines beliebigen Typs ein, die "
-"in einem 2D-Raum platziert sind."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree].\n"
-"This node allows you to blend linearly between three animations using a "
-"[Vector2] weight.\n"
-"You can add vertices to the blend space with [method add_blend_point] and "
-"automatically triangulate it by setting [member auto_triangles] to "
-"[code]true[/code]. Otherwise, use [method add_triangle] and [method "
-"remove_triangle] to create up the blend space by hand."
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree].\n"
-"Dieses Node ermöglicht die lineare Überblendung zwischen drei Animationen "
-"unter Verwendung eines [Vector2]-Gewichts.\n"
-"Sie können dem Überblendungsbereich mit [method add_blend_point] "
-"Scheitelpunkte hinzufügen und ihn automatisch triangulieren, indem Sie "
-"[member auto_triangles] auf [code]true[/code] setzen. Andernfalls verwenden "
-"Sie [method add_triangle] und [method remove_triangle], um den Blend Space "
-"von Hand zu erstellen."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Adds a new point that represents a [code]node[/code] at the position set by "
-"[code]pos[/code]. You can insert it at a specific index using the "
-"[code]at_index[/code] argument. If you use the default value for "
-"[code]at_index[/code], the point is inserted at the end of the blend points "
-"array."
-msgstr ""
-"Fügt einen neuen Punkt ein, der einen [code]node[/code] an der mit "
-"[code]pos[/code] festgelegten Position darstellt. Sie können ihn mit dem "
-"Argument [code]at_index[/code] an einem bestimmten Index einfügen. Wenn Sie "
-"den Standardwert für [code]at_index[/code] verwenden, wird der Punkt am Ende "
-"des Überblendungspunkt-Arrays eingefügt."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Creates a new triangle using three points [code]x[/code], [code]y[/code], "
-"and [code]z[/code]. Triangles can overlap. You can insert the triangle at a "
-"specific index using the [code]at_index[/code] argument. If you use the "
-"default value for [code]at_index[/code], the point is inserted at the end of "
-"the blend points array."
-msgstr ""
-"Erzeugt ein neues Dreieck mit drei Punkten [code]x[/code], [code]y[/code] "
-"und [code]z[/code]. Dreiecke können sich überlappen. Sie können das Dreieck "
-"an einem bestimmten Index mit dem Argument [code]at_index[/code] einfügen. "
-"Wenn Sie den Standardwert für [code]at_index[/code] verwenden, wird der "
-"Punkt am Ende des Blendpunkte-Arrays eingefügt."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Returns the number of points in the blend space."
-msgstr "Gibt die Anzahl der Punkte im Überblendungsbereich zurück."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Returns the [AnimationRootNode] referenced by the point at index "
-"[code]point[/code]."
-msgstr ""
-"Gibt den [AnimationRootNode] zurück, auf den der Punkt bei Index "
-"[code]Punkt[/code] verweist."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Returns the number of triangles in the blend space."
-msgstr "Gibt die Anzahl der Dreiecke im Überblendungsbereich zurück."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Returns the position of the point at index [code]point[/code] in the "
-"triangle of index [code]triangle[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Removes the point at index [code]point[/code] from the blend space."
-msgstr ""
-"Entfernt den Punkt bei Index [code]Punkt[/code] aus dem Überblendungsbereich."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Removes the triangle at index [code]triangle[/code] from the blend space."
-msgstr ""
-"Entfernt das Dreieck bei Index [code]Dreieck[/code] aus dem "
-"Überblendungsbereich."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"If [code]true[/code], the blend space is triangulated automatically. The "
-"mesh updates every time you add or remove points with [method "
-"add_blend_point] and [method remove_blend_point]."
-msgstr ""
-"Wenn [code]true[/code], wird der Überblendungsbereich automatisch "
-"trianguliert. Das Mesh wird jedes Mal aktualisiert, wenn Sie mit [method "
-"add_blend_point] und [method remove_blend_point] Punkte hinzufügen oder "
-"entfernen."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Controls the interpolation between animations. See [enum BlendMode] "
-"constants."
-msgstr ""
-"Steuert die Interpolation zwischen den Animationen. Siehe Konstanten [enum "
-"BlendMode]."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"The blend space's X and Y axes' upper limit for the points' position. See "
-"[method add_blend_point]."
-msgstr ""
-"Die obere Grenze der X- und Y-Achse des Blend Space für die Position der "
-"Punkte. Siehe [method add_blend_point]."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"The blend space's X and Y axes' lower limit for the points' position. See "
-"[method add_blend_point]."
-msgstr ""
-"Die untere Grenze der X- und Y-Achse des Blend Space für die Position der "
-"Punkte. Siehe [method add_blend_point]."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Position increment to snap to when moving a point."
-msgstr ""
-"Positionsinkrement, auf das beim Verschieben eines Punktes zurückgesprungen "
-"wird."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Name of the blend space's X axis."
-msgstr "Name der X-Achse des Überblendungsbereichs."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "Name of the blend space's Y axis."
-msgstr "Name der Y-Achse des Überblendungsbereichs."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Emitted every time the blend space's triangles are created, removed, or when "
-"one of their vertices changes position."
-msgstr ""
-"Wird jedes Mal ausgegeben, wenn die Dreiecke des Überblendungsbereichs "
-"erstellt oder entfernt werden oder wenn einer ihrer Scheitelpunkte seine "
-"Position ändert."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid "The interpolation between animations is linear."
-msgstr "Die Interpolation zwischen den Animationen ist linear."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"The blend space plays the animation of the node the blending position is "
-"closest to. Useful for frame-by-frame 2D animations."
-msgstr ""
-"Der Überblendungsbereich spielt die Animation des Knotens ab, dem die "
-"Überblendungsposition am nächsten ist. Nützlich für Frame-by-Frame 2D-"
-"Animationen."
-
-#: doc/classes/AnimationNodeBlendSpace2D.xml
-msgid ""
-"Similar to [constant BLEND_MODE_DISCRETE], but starts the new animation at "
-"the last animation's playback position."
-msgstr ""
-"Ähnlich wie [constant BLEND_MODE_DISCRETE], startet aber die neue Animation "
-"an der Abspielposition der letzten Animation."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "[AnimationTree] node resource that contains many blend type nodes."
-msgstr ""
-"Node Ressource [AnimationTree], die viele Knoten vom Typ \"Blend\" enthält."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-#, fuzzy
-msgid ""
-"This node may contain a sub-tree of any other blend type nodes, such as "
-"[AnimationNodeTransition], [AnimationNodeBlend2], [AnimationNodeBlend3], "
-"[AnimationNodeOneShot], etc. This is one of the most commonly used roots.\n"
-"An [AnimationNodeOutput] node named [code]output[/code] is created by "
-"default."
-msgstr ""
-"Dieses Node kann einen Unterbaum beliebiger anderer Nodes vom Typ Mischung "
-"enthalten, z. B. mix, blend2, blend3, one shot usw. Dies ist eine der am "
-"häufigsten verwendeten Wurzeln."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid ""
-"Adds an [AnimationNode] at the given [code]position[/code]. The [code]name[/"
-"code] is used to identify the created sub-node later."
-msgstr ""
-"Fügt einen [AnimationNode] an der angegebenen [code]position[/code] hinzu. "
-"Der [code]name[/code] wird verwendet, um den erstellten Unterknoten später "
-"zu identifizieren."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid ""
-"Connects the output of an [AnimationNode] as input for another "
-"[AnimationNode], at the input port specified by [code]input_index[/code]."
-msgstr ""
-"Verbindet den Ausgang eines [AnimationNode] als Eingang für einen anderen "
-"[AnimationNode], an dem durch [code]input_index[/code] angegebenen "
-"Eingangsschnittstelle."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "Disconnects the node connected to the specified input."
-msgstr "Trennt das Node, der mit dem angegebenen Eingang verbunden ist."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "Returns the sub-node with the specified [code]name[/code]."
-msgstr "Gibt das Unternodemit dem angegebenen [code]Namen[/code] zurück."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid ""
-"Returns the position of the sub-node with the specified [code]name[/code]."
-msgstr ""
-"Gibt die Position des Unternodes mit dem angegebenen [code]Namen[/code] "
-"zurück."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid ""
-"Returns [code]true[/code] if a sub-node with specified [code]name[/code] "
-"exists."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Unternode mit dem angegebenen "
-"[code]name[/code] existiert."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "Removes a sub-node."
-msgstr "Entfernt ein Unternode."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "Changes the name of a sub-node."
-msgstr "Ändert den Namen eines Unternodes."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "Modifies the position of a sub-node."
-msgstr "Ändert die Position eines Unternodes."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "The global offset of all sub-nodes."
-msgstr "Der globale Offset aller Unternodes."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "The connection was successful."
-msgstr "Die Verbindung war erfolgreich."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "The input node is [code]null[/code]."
-msgstr "Das Eingangsnode ist [code]null[/code]."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "The specified input port is out of range."
-msgstr "Der angegebene Eingangsschnittstelle liegt außerhalb des Bereichs."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "The output node is [code]null[/code]."
-msgstr "Das Ausgangsnode ist [code]null[/code]."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "Input and output nodes are the same."
-msgstr "Eingangs- und Ausgangsnodes sind identisch."
-
-#: doc/classes/AnimationNodeBlendTree.xml
-msgid "The specified connection already exists."
-msgstr "Die angegebene Verbindung existiert bereits."
-
-#: doc/classes/AnimationNodeOneShot.xml
-msgid "Plays an animation once in [AnimationNodeBlendTree]."
-msgstr "Spielt eine Animation einmal in [AnimationNodeBlendTree] ab."
-
-#: doc/classes/AnimationNodeOneShot.xml
-msgid ""
-"A resource to add to an [AnimationNodeBlendTree]. This node will execute a "
-"sub-animation and return once it finishes. Blend times for fading in and out "
-"can be customized, as well as filters."
-msgstr ""
-"Eine Ressource zum Hinzufügen zu einem [AnimationNodeBlendTree]. Dieses Node "
-"führt eine Sub-Animation aus und kehrt zurück, sobald sie beendet ist. Die "
-"Überblendungszeiten für das Ein- und Ausblenden sowie die Filter können "
-"angepasst werden."
-
-#: doc/classes/AnimationNodeOneShot.xml
-msgid ""
-"If [code]true[/code], the sub-animation will restart automatically after "
-"finishing."
-msgstr ""
-"Wenn [code]true[/code], wird die Sub-Animation nach Beendigung automatisch "
-"neu gestartet."
-
-#: doc/classes/AnimationNodeOneShot.xml
-msgid "The delay after which the automatic restart is triggered, in seconds."
-msgstr ""
-"Die Verzögerung, nach welcher der automatische Neustart ausgelöst wird, in "
-"Sekunden."
-
-#: doc/classes/AnimationNodeOneShot.xml
-msgid ""
-"If [member autorestart] is [code]true[/code], a random additional delay (in "
-"seconds) between 0 and this value will be added to [member "
-"autorestart_delay]."
-msgstr ""
-"Wenn [member autorestart] [code]true[/code] ist, wird eine zufällige "
-"zusätzliche Verzögerung (in Sekunden) zwischen 0 und diesem Wert zu [member "
-"autorestart_delay] hinzugefügt."
-
-#: doc/classes/AnimationNodeOutput.xml
-msgid "Generic output node to be added to [AnimationNodeBlendTree]."
-msgstr ""
-"Generisches Ausgangsnode, welches zu [AnimationNodeBlendTree] hinzugefügt "
-"wird."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "State machine for control of animations."
-msgstr "Zustandsautomat zur Steuerung von Animationen."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid ""
-"Contains multiple nodes representing animation states, connected in a graph. "
-"Node transitions can be configured to happen automatically or via code, "
-"using a shortest-path algorithm. Retrieve the "
-"[AnimationNodeStateMachinePlayback] object from the [AnimationTree] node to "
-"control it programmatically.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"var state_machine = $AnimationTree.get(\"parameters/playback\")\n"
-"state_machine.travel(\"some_state\")\n"
-"[/codeblock]"
-msgstr ""
-"Enthält mehrere Knoten, die Animationszustände darstellen und in einem "
-"Graphen verbunden sind. Die Knotenübergänge können so konfiguriert werden, "
-"dass sie automatisch oder über Code unter Verwendung eines Algorithmus mit "
-"dem kürzesten Weg erfolgen. Rufen Sie das Objekt "
-"[AnimationNodeStateMachinePlayback] vom Knoten [AnimationTree] ab, um es "
-"programmatisch zu steuern.\n"
-"[b]Beispiel:[/b]\n"
-"[codeblock]\n"
-"var state_machine = $AnimationTree.get(\"parameter/playback\")\n"
-"state_machine.travel(\"some_state\")\n"
-"[/codeblock]"
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid ""
-"Adds a new node to the graph. The [code]position[/code] is used for display "
-"in the editor."
-msgstr ""
-"Fügt ein neues Node in den Graphen ein. Die [code]Position[/code] wird für "
-"die Anzeige im Editor verwendet."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Adds a transition between the given nodes."
-msgstr "Fügt einen Übergang zwischen den gegebenen Nodes hinzu."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the graph's end node."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the draw offset of the graph. Used for display in the editor."
-msgstr ""
-"Gibt den Versatz des Graphen zurück. Wird zur Darstellung im Editor genutzt."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the animation node with the given name."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the given animation node's name."
-msgstr "Gibt den Namen des übergebenen AnimationNode zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the given node's coordinates. Used for display in the editor."
-msgstr ""
-"Gibt die Koordinaten des übergebenen Nodes zurück. Wird zur Anzeige im "
-"Editor genutzt."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the given transition."
-msgstr "Gibt den gegebenen Übergang zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the number of connections in the graph."
-msgstr "Gibt die Anzahl der Verbindungen im Graphen zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the given transition's start node."
-msgstr "Gibt das Anfangsnode des übergebenen Übergangs zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns the given transition's end node."
-msgstr "Gibt das Endnode des übergebenen Übergangs zurück."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Returns [code]true[/code] if the graph contains the given node."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Graph das übergebene Node enthält."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid ""
-"Returns [code]true[/code] if there is a transition between the given nodes."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Übergang zwischen den übergebenen "
-"Nodes existiert."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Deletes the given node from the graph."
-msgstr "Löscht das übergebene Node aus dem Graphen."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Deletes the transition between the two specified nodes."
-msgstr "Löscht den Übergang zwischen den zwei spezifizierten Nodes."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Deletes the given transition by index."
-msgstr "Löscht den Übergang mit dem übergebenen Index."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Renames the given node."
-msgstr "Benennt das übergebene Node um."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Replaces the node and keeps its transitions unchanged."
-msgstr "Ersetzt den Knotenpunkt und erhält seine Übergänge unverändert."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Sets the given node as the graph end point."
-msgstr "Legt das übergebene Node als das Ende des Graphen fest."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Sets the draw offset of the graph. Used for display in the editor."
-msgstr ""
-"Legt den Versatz des Graphen fest. Wird zur Darstellung im Editor genutzt."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Sets the node's coordinates. Used for display in the editor."
-msgstr ""
-"Legt die Koordinaten des Nodes fest. Wird zur Darstellung im Editor genutzt."
-
-#: doc/classes/AnimationNodeStateMachine.xml
-msgid "Sets the given node as the graph start point."
-msgstr "Setzt das übergebene Node als Startpunkt des Graphen."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid "Playback control for [AnimationNodeStateMachine]."
-msgstr "Wiedergabesteuerung für [AnimationNodeStateMachine]."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid ""
-"Allows control of [AnimationTree] state machines created with "
-"[AnimationNodeStateMachine]. Retrieve with [code]$AnimationTree."
-"get(\"parameters/playback\")[/code].\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"var state_machine = $AnimationTree.get(\"parameters/playback\")\n"
-"state_machine.travel(\"some_state\")\n"
-"[/codeblock]"
-msgstr ""
-"Erlaubt die Steuerung von [AnimationTree] Zustandsmaschinen, die mit "
-"[AnimationNodeStateMachine] erstellt wurden. Abfrage mit "
-"[code]$AnimationTree.get(\"parameters/playback\")[/code].\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"var state_machine = $AnimationTree.get(\"parameters/playback\")\n"
-"state_machine.travel(\"some_state\")\n"
-"[/codeblock]"
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid "Returns the currently playing animation state."
-msgstr "Gibt den aktuell wiedergegebenen Animationszustand zurück."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-#, fuzzy
-msgid "Returns the playback position within the current animation state."
-msgstr "Gibt den aktuell wiedergegebenen Animationszustand zurück."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid ""
-"Returns the current travel path as computed internally by the A* algorithm."
-msgstr ""
-"Gibt den aktuellen Reisepfad zurück, der intern vom A*-Algorithmus berechnet "
-"wurde."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid "Returns [code]true[/code] if an animation is playing."
-msgstr "Gibt [code]true[/code] zurück, wenn eine Animation abgespielt wird."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid "Starts playing the given animation."
-msgstr "Startet die Wiedergabe der angegebenen Animation."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid "Stops the currently playing animation."
-msgstr "Hält die aktuell laufende Animation an."
-
-#: doc/classes/AnimationNodeStateMachinePlayback.xml
-msgid ""
-"Transitions from the current state to another one, following the shortest "
-"path."
-msgstr ""
-"Geht vom aktuellen Zustand in einen anderen über und folgt dabei dem "
-"kürzesten Weg."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-#, fuzzy
-msgid ""
-"Turn on auto advance when this condition is set. The provided name will "
-"become a boolean parameter on the [AnimationTree] that can be controlled "
-"from code (see [url=$DOCS_URL/tutorials/animation/animation_tree."
-"html#controlling-from-code]Using AnimationTree[/url]). For example, if "
-"[member AnimationTree.tree_root] is an [AnimationNodeStateMachine] and "
-"[member advance_condition] is set to [code]\"idle\"[/code]:\n"
-"[codeblock]\n"
-"$animation_tree[\"parameters/conditions/idle\"] = is_on_floor and "
-"(linear_velocity.x == 0)\n"
-"[/codeblock]"
-msgstr ""
-"Schaltet die automatische Weiterschaltung ein, wenn diese Bedingung gesetzt "
-"ist. Der angegebene Name wird zu einem booleschen Parameter für den "
-"[AnimationTree], der über den Code gesteuert werden kann (siehe [url=https://"
-"docs.godotengine.org/en/latest/tutorials/animation/animation_tree."
-"html#controlling-from-code][/url]). Zum Beispiel, wenn [member AnimationTree."
-"tree_root] eine [AnimationNodeStateMachine] ist und [member "
-"advance_condition] auf [code]\"idle\"[/code] gesetzt ist:\n"
-"[codeblock]\n"
-"$animation_tree[\"parameters/conditions/idle\"] = is_on_floor und "
-"(linear_velocity.x == 0)\n"
-"[/codeblock]"
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid ""
-"Turn on the transition automatically when this state is reached. This works "
-"best with [constant SWITCH_MODE_AT_END]."
-msgstr ""
-"Aktiviere den Übergang automatisch wenn dieser Zustand erreicht wird. Dies "
-"funktioniert am besten mit [constant SWITCH_MODE_AT_END]."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid ""
-"Don't use this transition during [method AnimationNodeStateMachinePlayback."
-"travel] or [member auto_advance]."
-msgstr ""
-"Verwenden Sie diesen Übergang nicht während [method "
-"AnimationNodeStateMachinePlayback.travel] oder [member auto_advance]."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid ""
-"Lower priority transitions are preferred when travelling through the tree "
-"via [method AnimationNodeStateMachinePlayback.travel] or [member "
-"auto_advance]."
-msgstr ""
-"Übergänge mit geringerer Priorität werden bevorzugt, wenn der Baum mit "
-"[method AnimationNodeStateMachinePlayback.travel] oder [member auto_advance] "
-"durchlaufen wird."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid "The transition type."
-msgstr "Der Übergangstyp."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid "The time to cross-fade between this state and the next."
-msgstr "Die Überblendzeit zwischen diesem Zustand und dem nächsten."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid "Emitted when [member advance_condition] is changed."
-msgstr "Ausgesendet wenn [member advance_condition] verändert wird."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid ""
-"Switch to the next state immediately. The current state will end and blend "
-"into the beginning of the new one."
-msgstr ""
-"Wechsle unmittelbar in den nächsten Zustand. Der aktuelle Zustand wird "
-"beendet und geht in den Anfang des neuen über."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid ""
-"Switch to the next state immediately, but will seek the new state to the "
-"playback position of the old state."
-msgstr ""
-"Wechselt sofort in den nächsten Zustand, sucht aber den neuen Zustand an der "
-"Abspielposition des alten Zustands."
-
-#: doc/classes/AnimationNodeStateMachineTransition.xml
-msgid ""
-"Wait for the current state playback to end, then switch to the beginning of "
-"the next state animation."
-msgstr ""
-"Wartet, bis die Wiedergabe des aktuellen Zustands beendet ist, und schaltet "
-"dann zum Beginn der nächsten Zustandsanimation um."
-
-#: doc/classes/AnimationNodeTimeScale.xml
-msgid "A time-scaling animation node to be used with [AnimationTree]."
-msgstr ""
-"Ein zeitlich skalierender Animationsknoten, der mit [AnimationTree] "
-"verwendet wird."
-
-#: doc/classes/AnimationNodeTimeScale.xml
-msgid ""
-"Allows scaling the speed of the animation (or reversing it) in any children "
-"nodes. Setting it to 0 will pause the animation."
-msgstr ""
-"Ermöglicht die Skalierung der Geschwindigkeit der Animation (oder deren "
-"Umkehrung) in beliebigen Kindknoten. Wenn Sie den Wert 0 einstellen, wird "
-"die Animation angehalten."
-
-#: doc/classes/AnimationNodeTimeSeek.xml
-msgid "A time-seeking animation node to be used with [AnimationTree]."
-msgstr ""
-"Ein zeitabhängiger Animationsknoten, der mit [AnimationTree] verwendet wird."
-
-#: doc/classes/AnimationNodeTimeSeek.xml
-msgid ""
-"This node can be used to cause a seek command to happen to any sub-children "
-"of the animation graph. Use this node type to play an [Animation] from the "
-"start or a certain playback position inside the [AnimationNodeBlendTree]. "
-"After setting the time and changing the animation playback, the seek node "
-"automatically goes into sleep mode on the next process frame by setting its "
-"[code]seek_position[/code] value to [code]-1.0[/code].\n"
-"[codeblock]\n"
-"# Play child animation from the start.\n"
-"animation_tree.set(\"parameters/Seek/seek_position\", 0.0)\n"
-"# Alternative syntax (same result as above).\n"
-"animation_tree[\"parameters/Seek/seek_position\"] = 0.0\n"
-"\n"
-"# Play child animation from 12 second timestamp.\n"
-"animation_tree.set(\"parameters/Seek/seek_position\", 12.0)\n"
-"# Alternative syntax (same result as above).\n"
-"animation_tree[\"parameters/Seek/seek_position\"] = 12.0\n"
-"[/codeblock]"
-msgstr ""
-"Dieser Knoten kann verwendet werden, um einen Suchbefehl für alle "
-"Unterkinder des Animationsgraphen auszuführen. Verwenden Sie diesen "
-"Knotentyp, um eine [Animation] ab dem Start oder einer bestimmten "
-"Abspielposition innerhalb des [AnimationNodeBlendTree] abzuspielen. Nach dem "
-"Einstellen der Zeit und dem Ändern der Animationswiedergabe geht der "
-"Suchknoten beim nächsten Prozessbild automatisch in den Schlafmodus, indem "
-"er seinen Wert [code]seek_position[/code] auf [code]-1.0[/code] setzt.\n"
-"[codeblock]\n"
-"# Kind-Animation von Anfang an abspielen.\n"
-"animation_tree.set(\"parameters/Seek/seek_position\", 0.0)\n"
-"# Alternativer Syntax (gleiches Ergebnis wie oben).\n"
-"animation_tree[\"parameters/Seek/seek_position\"] = 0.0\n"
-"\n"
-"# Kind-Animation ab dem 12 Sekunden Zeitstempel abspielen.\n"
-"animation_tree.set(\"parameters/Seek/seek_position\", 12.0)\n"
-"# Alternativer Syntax (gleiches Ergebnis wie oben).\n"
-"animation_tree[\"parameters/Seek/seek_position\"] = 12.0\n"
-"[/codeblock]"
-
-#: doc/classes/AnimationNodeTransition.xml
-msgid "A generic animation transition node for [AnimationTree]."
-msgstr "Ein generischer Animationsübergangsknoten für [AnimationTree]."
-
-#: doc/classes/AnimationNodeTransition.xml
-msgid ""
-"Simple state machine for cases which don't require a more advanced "
-"[AnimationNodeStateMachine]. Animations can be connected to the inputs and "
-"transition times can be specified."
-msgstr ""
-"Einfacher Zustandsautomat für Fälle, die keine erweiterte "
-"[AnimationNodeStateMachine] benötigen. An den Eingängen können Animationen "
-"angeschlossen und Übergangszeiten festgelegt werden."
-
-#: doc/classes/AnimationNodeTransition.xml
-msgid "The number of available input ports for this node."
-msgstr "Die Anzahl der verfügbaren Eingangsanschlüsse für diesen Knoten."
-
-#: doc/classes/AnimationNodeTransition.xml
-msgid ""
-"Cross-fading time (in seconds) between each animation connected to the "
-"inputs."
-msgstr ""
-"Überblendzeit (in Sekunden) zwischen jeder an den Eingängen angeschlossenen "
-"Animation."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Container and player of [Animation] resources."
-msgstr "Container und Player von [Animation]-Ressourcen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"An animation player is used for general-purpose playback of [Animation] "
-"resources. It contains a dictionary of animations (referenced by name) and "
-"custom blend times between their transitions. Additionally, animations can "
-"be played and blended in different channels.\n"
-"[AnimationPlayer] is more suited than [Tween] for animations where you know "
-"the final values in advance. For example, fading a screen in and out is more "
-"easily done with an [AnimationPlayer] node thanks to the animation tools "
-"provided by the editor. That particular example can also be implemented with "
-"a [Tween] node, but it requires doing everything by code.\n"
-"Updating the target properties of animations occurs at process time."
-msgstr ""
-"Ein Animations-Player wird für die allgemeine Wiedergabe von [Animation]-"
-"Ressourcen verwendet. Er enthält ein Wörterbuch mit Animationen (die über "
-"ihren Namen referenziert werden) und benutzerdefinierte Überblendzeiten "
-"zwischen ihren Übergängen. Außerdem können Animationen in verschiedenen "
-"Kanälen abgespielt und überblendet werden.\n"
-"Der [AnimationPlayer] ist besser als das [Tween] für Animationen geeignet, "
-"bei denen Sie die Endwerte im Voraus kennen. Das Ein- und Ausblenden eines "
-"Bildschirms beispielsweise lässt sich dank der vom Editor bereitgestellten "
-"Animationswerkzeuge leichter mit einem [AnimationPlayer]-Knoten realisieren. "
-"Dieses spezielle Beispiel kann auch mit einem [Tween]-Knoten implementiert "
-"werden, aber es erfordert, dass alles per Code ausgeführt wird.\n"
-"Das Aktualisieren der Zieleigenschaften von Animationen erfolgt zur "
-"Prozesszeit."
-
-#: doc/classes/AnimationPlayer.xml
-#, fuzzy
-msgid "Animation tutorial index"
-msgstr "unbekanntes Node."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Adds [code]animation[/code] to the player accessible with the key "
-"[code]name[/code]."
-msgstr ""
-"Fügt [code]animation[/code] zu dem mit der Taste [code]name[/code] "
-"erreichbaren Player hinzu."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Shifts position in the animation timeline and immediately updates the "
-"animation. [code]delta[/code] is the time in seconds to shift. Events "
-"between the current frame and [code]delta[/code] are handled."
-msgstr ""
-"Verschiebt die Position in der Animationszeitleiste und aktualisiert die "
-"Animation sofort. [code]delta[/code] ist die Zeit in Sekunden für die "
-"Verschiebung. Ereignisse zwischen dem aktuellen Frame und [code]delta[/code] "
-"werden behandelt."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Returns the name of the next animation in the queue."
-msgstr "Gibt den Namen der nächsten Animation in der Warteschlange zurück."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Triggers the [code]anim_to[/code] animation when the [code]anim_from[/code] "
-"animation completes."
-msgstr ""
-"Löst die Animation [code]anim_to[/code] aus, wenn die Animation "
-"[code]anim_from[/code] abgeschlossen ist."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"[AnimationPlayer] caches animated nodes. It may not notice if a node "
-"disappears; [method clear_caches] forces it to update the cache again."
-msgstr ""
-"Der [AnimationPlayer] speichert animierte Knoten im Cache. Er bemerkt "
-"möglicherweise nicht, wenn ein Knoten verschwindet; [method clear_caches] "
-"zwingt ihn, den Cache erneut zu aktualisieren."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Clears all queued, unplayed animations."
-msgstr ""
-"Löscht alle in der Warteschlange stehenden, nicht abgespielten Animationen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Returns the name of [code]animation[/code] or an empty string if not found."
-msgstr ""
-"Gibt den Namen von [code]animation[/code] zurück oder eine leere "
-"Zeichenkette, wenn nicht gefunden."
-
-#: doc/classes/AnimationPlayer.xml
-#, fuzzy
-msgid ""
-"Returns the [Animation] with the key [code]name[/code]. If the animation "
-"does not exist, [code]null[/code] is returned and an error is logged."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Returns the list of stored animation names."
-msgstr "Gibt die Liste der gespeicherten Animationsnamen zurück."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Gets the blend time (in seconds) between two animations, referenced by their "
-"names."
-msgstr ""
-"Ruft die Überblendzeit (in Sekunden) zwischen zwei Animationen ab, die durch "
-"ihre Namen referenziert werden."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Gets the actual playing speed of current animation or 0 if not playing. This "
-"speed is the [member playback_speed] property multiplied by "
-"[code]custom_speed[/code] argument specified when calling the [method play] "
-"method."
-msgstr ""
-"Ruft die aktuelle Abspielgeschwindigkeit der aktuellen Animation ab oder 0, "
-"wenn nicht abgespielt wird. Diese Geschwindigkeit ist die Eigenschaft "
-"[member playback_speed] multipliziert mit dem Argument [code]custom_speed[/"
-"code], das beim Aufruf der [method play]-Methode angegeben wurde."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Returns a list of the animation names that are currently queued to play."
-msgstr ""
-"Gibt eine Liste der Namen der Animationen zurück, die derzeit in der "
-"Warteschlange für die Wiedergabe stehen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Returns [code]true[/code] if the [AnimationPlayer] stores an [Animation] "
-"with key [code]name[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der [AnimationPlayer] eine [Animation] "
-"mit Schlüssel [code]name[/code] speichert."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Returns [code]true[/code] if playing an animation."
-msgstr "Gibt [code]true[/code] zurück, wenn eine Animation abgespielt wird."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Plays the animation with key [code]name[/code]. Custom blend times and speed "
-"can be set. If [code]custom_speed[/code] is negative and [code]from_end[/"
-"code] is [code]true[/code], the animation will play backwards (which is "
-"equivalent to calling [method play_backwards]).\n"
-"The [AnimationPlayer] keeps track of its current or last played animation "
-"with [member assigned_animation]. If this method is called with that same "
-"animation [code]name[/code], or with no [code]name[/code] parameter, the "
-"assigned animation will resume playing if it was paused, or restart if it "
-"was stopped (see [method stop] for both pause and stop). If the animation "
-"was already playing, it will keep playing.\n"
-"[b]Note:[/b] The animation will be updated the next time the "
-"[AnimationPlayer] is processed. If other variables are updated at the same "
-"time this is called, they may be updated too early. To perform the update "
-"immediately, call [code]advance(0)[/code]."
-msgstr ""
-"Spielt die Animation mit der Taste [code]name[/code] wieder. "
-"Benutzerdefinierte Mischzeiten und Geschwindigkeit können eingestellt "
-"werden. Wenn [code]custom_speed[/code] negativ ist und [code]from_end [/"
-"code] ist [code]true[/code] ist, wird die Animation rückwärts wiedergegeben "
-"(was dem Aufruf von [method play_backwards] entspricht).\n"
-"Der [AnimationPlayer] verfolgt seine aktuelle oder zuletzt wiedergegebene "
-"Animation mit [member assigned_animation]. Wenn diese Methode mit derselben "
-"Animation [code]name[/code] oder ohne [code]name[/code] Parameter aufgerufen "
-"wird, dann wird die zugewiesene Animation wiedergegeben, wenn sie angehalten "
-"wurde, oder neu gestartet, wenn sie beendet wurde (siehe [method stop] für "
-"Pause und Stopp). Wenn die Animation bereits abgespielt wurde, wird sie "
-"weiterhin abgespielt.\n"
-"[b] Hinweis:[/b] Die Animation wird aktualisiert, wenn der [AnimationPlayer] "
-"das nächste Mal verarbeitet wird. Wenn andere Variablen gleichzeitig "
-"aktualisiert werden, wird dies aufgerufen, sie können zu früh aktualisiert "
-"werden. Um die Aktualisierung sofort durchzuführen, rufen Sie "
-"[code]advance(0)[/code] an."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Plays the animation with key [code]name[/code] in reverse.\n"
-"This method is a shorthand for [method play] with [code]custom_speed = -1.0[/"
-"code] and [code]from_end = true[/code], so see its description for more "
-"information."
-msgstr ""
-"Spielt die Animation mit der Taste [code]name[/code] in umgekehrter "
-"Reihenfolge ab.\n"
-"Diese Methode ist ein Kürzel für [method play] mit [code]custom_speed = "
-"-1.0[/code] und [code]from_end = true[/code], daher finden Sie weitere "
-"Informationen in der Beschreibung."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Queues an animation for playback once the current one is done.\n"
-"[b]Note:[/b] If a looped animation is currently playing, the queued "
-"animation will never play unless the looped animation is stopped somehow."
-msgstr ""
-"Stellt eine Animation in die Warteschlange, die abgespielt werden soll, "
-"sobald die aktuelle fertig ist.\n"
-"[b]Hinweis:[/b] Wenn gerade eine Animation in einer Schleife abgespielt "
-"wird, dann wird diese in der Warteschlange nicht abgespielt, es sei denn, "
-"die Animation in der Schleife wird irgendwie gestoppt."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Removes the animation with key [code]name[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Renames an existing animation with key [code]name[/code] to [code]newname[/"
-"code]."
-msgstr ""
-"Benennt eine vorhandene Animation mit der Taste [code]name[/code] in "
-"[code]newname[/code] um."
-
-#: doc/classes/AnimationPlayer.xml
-#, fuzzy
-msgid ""
-"Seeks the animation to the [code]seconds[/code] point in time (in seconds). "
-"If [code]update[/code] is [code]true[/code], the animation updates too, "
-"otherwise it updates at process time. Events between the current frame and "
-"[code]seconds[/code] are skipped.\n"
-"[b]Note:[/b] Seeking to the end of the animation doesn't emit [signal "
-"animation_finished]. If you want to skip animation and emit the signal, use "
-"[method advance]."
-msgstr ""
-"Sucht die Animation bis zum Zeitpunkt [code]Sekunden[/code] (in Sekunden). "
-"Wenn [code]update[/code] ist [code]true[/code], wird auch die Animation "
-"aktualisiert, ansonsten wird sie zur Prozesszeit aktualisiert. Ereignisse "
-"zwischen dem aktuellen Frame und [code]Sekunden[/code] werden übersprungen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Specifies a blend time (in seconds) between two animations, referenced by "
-"their names."
-msgstr ""
-"Gibt eine Überblendzeit (in Sekunden) zwischen zwei Animationen an, auf die "
-"durch ihre Namen verwiesen wird."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Stops or pauses the currently playing animation. If [code]reset[/code] is "
-"[code]true[/code], the animation position is reset to [code]0[/code] and the "
-"playback speed is reset to [code]1.0[/code].\n"
-"If [code]reset[/code] is [code]false[/code], the [member "
-"current_animation_position] will be kept and calling [method play] or "
-"[method play_backwards] without arguments or with the same animation name as "
-"[member assigned_animation] will resume the animation."
-msgstr ""
-"Stoppt oder pausiert die aktuell wiedergegebene Animation. Wenn [code]reset[/"
-"code] gleich [code]true[/code] ist, wird die Animationsposition auf [code]0[/"
-"code] und die Abspielgeschwindigkeit auf [code]1.0[/code] zurückgesetzt.\n"
-"Wenn [code]reset[/code] gleich [code]false[/code] ist, wird die [member "
-"current_animation_position] beibehalten und der Aufruf von [method play] "
-"oder [method play_backwards] ohne Argumente oder mit demselben "
-"Animationsnamen wie [member assigned_animation] setzt die Animation fort."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"If playing, the current animation; otherwise, the animation last played. "
-"When set, would change the animation, but would not play it unless currently "
-"playing. See also [member current_animation]."
-msgstr ""
-"Wenn sie abgespielt wird, die aktuelle Animation, sonst die zuletzt "
-"abgespielte Animation. Wenn gesetzt, wird die Animation geändert, aber nicht "
-"abgespielt, es sei denn, sie wird gerade abgespielt. Siehe auch [member "
-"current_animation]."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "The name of the animation to play when the scene loads."
-msgstr ""
-"Der Name der Animation, die beim Laden der Szene abgespielt werden soll."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"The name of the currently playing animation. If no animation is playing, the "
-"property's value is an empty string. Changing this value does not restart "
-"the animation. See [method play] for more information on playing "
-"animations.\n"
-"[b]Note:[/b] While this property appears in the inspector, it's not meant to "
-"be edited, and it's not saved in the scene. This property is mainly used to "
-"get the currently playing animation, and internally for animation playback "
-"tracks. For more information, see [Animation]."
-msgstr ""
-"Der Name der aktuell abgespielten Animation. Wenn keine Animation abgespielt "
-"wird, ist der Wert der Eigenschaft eine leere Zeichenkette. Eine Änderung "
-"dieses Wertes führt nicht zum Neustart der Animation. Weitere Informationen "
-"über das Abspielen von Animationen finden Sie unter [method play].\n"
-"[b]Hinweis:[/b] Diese Eigenschaft wird zwar im Inspektor angezeigt, ist aber "
-"nicht zum Bearbeiten gedacht und wird nicht in der Szene gespeichert. Diese "
-"Eigenschaft wird hauptsächlich verwendet, um die aktuell abgespielte "
-"Animation zu erhalten, und intern für Animationswiedergabespuren. Für "
-"weitere Informationen, siehe [Animation]."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "The length (in seconds) of the currently being played animation."
-msgstr "Die Länge (in Sekunden) der aktuell wiedergegebenen Animation."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "The position (in seconds) of the currently playing animation."
-msgstr "Die Position (in Sekunden) der aktuell spielenden Animation."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "The call mode to use for Call Method tracks."
-msgstr "Der Anrufmodus, der für Spuren der Anrufmethode verwendet werden soll."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"If [code]true[/code], updates animations in response to process-related "
-"notifications."
-msgstr ""
-"Wenn [code]true[/code], aktualisiert Animationen als Reaktion auf "
-"prozessbezogene Benachrichtigungen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"The default time in which to blend animations. Ranges from 0 to 4096 with "
-"0.01 precision."
-msgstr ""
-"Die Standardzeit, in der Animationen überblendet werden sollen. Der Bereich "
-"reicht von 0 bis 4096 mit einer Genauigkeit von 0,01."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "The process notification in which to update animations."
-msgstr "Die Prozessmeldung, in der die Animationen aktualisiert werden sollen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"The speed scaling ratio. For instance, if this value is 1, then the "
-"animation plays at normal speed. If it's 0.5, then it plays at half speed. "
-"If it's 2, then it plays at double speed."
-msgstr ""
-"Das Skalierungsverhältnis der Geschwindigkeit. Wenn dieser Wert z. B. 1 ist, "
-"wird die Animation mit normaler Geschwindigkeit abgespielt. Bei einem Wert "
-"von 0,5 wird sie mit halber Geschwindigkeit abgespielt. Wenn der Wert 2 ist, "
-"wird die Animation mit doppelter Geschwindigkeit abgespielt."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"This is used by the editor. If set to [code]true[/code], the scene will be "
-"saved with the effects of the reset animation applied (as if it had been "
-"seeked to time 0), then reverted after saving.\n"
-"In other words, the saved scene file will contain the \"default pose\", as "
-"defined by the reset animation, if any, with the editor keeping the values "
-"that the nodes had before saving."
-msgstr ""
-"Dies wird vom Editor verwendet. Wenn es auf [code]true[/code] gesetzt wird, "
-"wird die Szene mit den Effekten der Reset-Animation gespeichert (als ob sie "
-"auf Zeit 0 gesucht worden wäre), und nach dem Speichern wieder "
-"zurückgesetzt.\n"
-"Mit anderen Worten, die gespeicherte Szenendatei enthält die \"Standard-"
-"Pose\", wie sie durch die Rücksetz-Animation definiert ist, und der Editor "
-"behält die Werte bei, die die Knoten vor dem Speichern hatten."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "The node from which node path references will travel."
-msgstr "Das Node, von dem aus Nodepfadreferenzen erfolgen."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Emitted when a queued animation plays after the previous animation was "
-"finished. See [method queue].\n"
-"[b]Note:[/b] The signal is not emitted when the animation is changed via "
-"[method play] or from [AnimationTree]."
-msgstr ""
-"Wird ausgelöst, wenn eine zurückgestellte Animation abgespielt wird nachdem "
-"eine vorherige Animation beendet wurde. Siehe auch [method queue].\n"
-"[b]Anmerkung:[/b] Das Signal wird nicht ausgelöst, wenn die Animation mit "
-"[method play] oder von [AnimationTree] geändert wird."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Notifies when an animation finished playing."
-msgstr "Benachrichtigt, wenn die Wiedergabe einer Animation beendet ist."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Notifies when an animation starts playing."
-msgstr "Benachrichtigt, wenn eine Animation abgespielt wird."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Notifies when the caches have been cleared, either automatically, or "
-"manually via [method clear_caches]."
-msgstr ""
-"Benachrichtigt, wenn die Caches geleert wurden, entweder automatisch oder "
-"manuell über [method clear_caches]."
-
-#: doc/classes/AnimationPlayer.xml doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Process animation during the physics process. This is especially useful when "
-"animating physics bodies."
-msgstr ""
-"Animation während des Physikprozesses verarbeiten. Dies ist besonders bei "
-"der Animation von Physikkörpern nützlich."
-
-#: doc/classes/AnimationPlayer.xml doc/classes/AnimationTreePlayer.xml
-msgid "Process animation during the idle process."
-msgstr "Prozessanimation während des Leerlaufs."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Do not process animation. Use [method advance] to process the animation "
-"manually."
-msgstr ""
-"Animation nicht bearbeiten. Verwenden Sie [method advance], um die Animation "
-"manuell zu bearbeiten."
-
-#: doc/classes/AnimationPlayer.xml
-msgid ""
-"Batch method calls during the animation process, then do the calls after "
-"events are processed. This avoids bugs involving deleting nodes or modifying "
-"the AnimationPlayer while playing."
-msgstr ""
-"Stapeln Sie Methodenaufrufe während des Animationsprozesses und führen Sie "
-"die Aufrufe dann nach der Verarbeitung der Ereignisse aus. Dadurch werden "
-"Fehler beim Löschen von Nodes oder beim Ändern des AnimationPlayers während "
-"der Wiedergabe vermieden."
-
-#: doc/classes/AnimationPlayer.xml
-msgid "Make method calls immediately when reached in the animation."
-msgstr "Methodenaufrufe sofort bei Erreichen in der Animation durchführen."
-
-#: doc/classes/AnimationTree.xml
-msgid ""
-"A node to be used for advanced animation transitions in an [AnimationPlayer]."
-msgstr ""
-"Ein Node, das für erweiterte Animationsübergänge in einem [AnimationPlayer] "
-"verwendet wird."
-
-#: doc/classes/AnimationTree.xml
-#, fuzzy
-msgid ""
-"A node to be used for advanced animation transitions in an "
-"[AnimationPlayer].\n"
-"[b]Note:[/b] When linked with an [AnimationPlayer], several properties and "
-"methods of the corresponding [AnimationPlayer] will not function as "
-"expected. Playback and transitions should be handled using only the "
-"[AnimationTree] and its constituent [AnimationNode](s). The "
-"[AnimationPlayer] node should be used solely for adding, deleting, and "
-"editing animations."
-msgstr ""
-"Hinweis: Wenn mit einem [AnimationPlayer] verknüpft, funktionieren mehrere "
-"Eigenschaften und Methoden des entsprechenden [AnimationPlayer] nicht wie "
-"erwartet. Wiedergabe und Übergänge sollten nur mit dem [AnimationTree] und "
-"den zugehörigen [AnimationNode](s) gehandhabt werden. Der [AnimationPlayer]-"
-"Knoten sollte ausschließlich zum Hinzufügen, Löschen und Bearbeiten von "
-"Animationen verwendet werden."
-
-#: doc/classes/AnimationTree.xml
-msgid "Using AnimationTree"
-msgstr "Verwendung des AnimationTree"
-
-#: doc/classes/AnimationTree.xml
-msgid "Manually advance the animations by the specified time (in seconds)."
-msgstr ""
-"Bewegt die Animationen manuell um die angegebene Zeit (in Sekunden) weiter."
-
-#: doc/classes/AnimationTree.xml
-#, fuzzy
-msgid ""
-"Retrieve the motion of the [member root_motion_track] as a [Transform] that "
-"can be used elsewhere. If [member root_motion_track] is not a path to a "
-"track of type [constant Animation.TYPE_TRANSFORM], returns an identity "
-"transformation. See also [member root_motion_track] and [RootMotionView]."
-msgstr ""
-"Ruft die Bewegung der [member root_motion_track] als [Transform] ab, die an "
-"anderer Stelle verwendet werden kann. Wenn [member root_motion_track] kein "
-"Pfad zu einer Spur des Typs [constant Animation.TYPE_TRANSFORM] ist, wird "
-"eine Identitätstransformation zurückgegeben."
-
-#: doc/classes/AnimationTree.xml
-msgid "If [code]true[/code], the [AnimationTree] will be processing."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/AnimationTree.xml
-msgid "The path to the [AnimationPlayer] used for animating."
-msgstr "Der Pfad zum [AnimationPlayer], der zum Animieren verwendet wird."
-
-#: doc/classes/AnimationTree.xml
-msgid ""
-"The process mode of this [AnimationTree]. See [enum AnimationProcessMode] "
-"for available modes."
-msgstr ""
-"Der Prozessmodus dieses [AnimationTree]. Siehe [enum AnimationProcessMode] "
-"für verfügbare Modi."
-
-#: doc/classes/AnimationTree.xml
-#, fuzzy
-msgid ""
-"The path to the Animation track used for root motion. Paths must be valid "
-"scene-tree paths to a node, and must be specified starting from the parent "
-"node of the node that will reproduce the animation. To specify a track that "
-"controls properties or bones, append its name after the path, separated by "
-"[code]\":\"[/code]. For example, [code]\"character/skeleton:ankle\"[/code] "
-"or [code]\"character/mesh:transform/local\"[/code].\n"
-"If the track has type [constant Animation.TYPE_TRANSFORM], the "
-"transformation will be cancelled visually, and the animation will appear to "
-"stay in place. See also [method get_root_motion_transform] and "
-"[RootMotionView]."
-msgstr ""
-"Der Pfad zur Animationsspur, die für die Wurzelbewegung verwendet wird. "
-"Pfade müssen gültige Szenenbaumpfade zu einem Knoten sein und müssen "
-"ausgehend vom übergeordneten Knoten des Knotens angegeben werden, der die "
-"Animation wiedergeben wird. Um eine Spur anzugeben, die Eigenschaften oder "
-"Bones steuert, fügen Sie ihren Namen nach dem Pfad an, getrennt durch "
-"[code]\":\"[/code]. Zum Beispiel: [code]\"character/skeleton:ankle\"[/code] "
-"oder [code]\"character/mesh:transform/local\"[/code].\n"
-"Wenn die Spur den Typ [constant Animation.TYPE_TRANSFORM] hat, wird die "
-"Transformation visuell aufgehoben, und die Animation scheint an ihrem Platz "
-"zu bleiben."
-
-#: doc/classes/AnimationTree.xml
-msgid "The root animation node of this [AnimationTree]. See [AnimationNode]."
-msgstr ""
-"Der Wurzel-Animationsknoten dieses [AnimationTree]. Siehe [AnimationNode]."
-
-#: doc/classes/AnimationTree.xml
-msgid ""
-"The animations will progress during the physics frame (i.e. [method Node."
-"_physics_process])."
-msgstr ""
-"Die Animationen werden während des Physikframes (d. h. [method Node."
-"_physics_process]) fortgesetzt."
-
-#: doc/classes/AnimationTree.xml
-msgid ""
-"The animations will progress during the idle frame (i.e. [method Node."
-"_process])."
-msgstr ""
-"Die Animationen werden während des Leerlaufs fortgesetzt (d. h. [method Node."
-"_process])."
-
-#: doc/classes/AnimationTree.xml
-msgid "The animations will only progress manually (see [method advance])."
-msgstr ""
-"Die Animationen werden nur manuell fortgesetzt (siehe [method advance])."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"[i]Deprecated.[/i] Animation player that uses a node graph for blending "
-"animations. Superseded by [AnimationTree]."
-msgstr ""
-"[i]Veraltet.[/i] Animations-Wiedergabekomponente die einen Knoten-basierten "
-"Graphen zur Überblendung von Animationen nutzt. Wurde ersetzt durch "
-"[AnimationTree]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"[i]Deprecated.[/i] A node graph tool for blending multiple animations bound "
-"to an [AnimationPlayer]. Especially useful for animating characters or other "
-"skeleton-based rigs. It can combine several animations to form a desired "
-"pose.\n"
-"It takes [Animation]s from an [AnimationPlayer] node and mixes them "
-"depending on the graph.\n"
-"See [AnimationTree] for a more full-featured replacement of this node."
-msgstr ""
-"[i]Veraltet.[/i] Ein knoten-basiertes Graphen-Tool zum Überblenden von "
-"mehreren Animationen die an einen [AnimationPlayer] gebunden sind. Das ist "
-"besonders hilfreich beim Animieren von Spieler-Charakteren oder anderen "
-"Objekten auf Skelett-Basis. Es kann mehrere Animationen nutzen um eine "
-"erwünschte Pose zu formen.\n"
-"Es nimmt [Animation]s von einem [AnimationPlayer] Knoten und vermischt sie "
-"wie benötigt auf dem Graphen.\n"
-"Siehe auch [AnimationTree] für einen vollumfänglichen Austausch dieses "
-"Knotenpunkts."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Adds a [code]type[/code] node to the graph with name [code]id[/code]."
-msgstr ""
-"Fügt [code]animation[/code] zu dem mit der Taste [code]name[/code] "
-"erreichbaren Player hinzu."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Shifts position in the animation timeline. [code]delta[/code] is the time in "
-"seconds to shift. Events between the current frame and [code]delta[/code] "
-"are handled."
-msgstr ""
-"Verschiebt die Position in der Animationszeitleiste und aktualisiert die "
-"Animation sofort. [code]delta[/code] ist die Zeit in Sekunden für die "
-"Verschiebung. Ereignisse zwischen dem aktuellen Frame und [code]delta[/code] "
-"werden behandelt."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns the [AnimationPlayer]'s [Animation] bound to the "
-"[AnimationTreePlayer]'s animation node with name [code]id[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der [AnimationPlayer] eine [Animation] "
-"mit Schlüssel [code]name[/code] speichert."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns the name of the [member master_player]'s [Animation] bound to this "
-"animation node."
-msgstr "Gibt den Namen der nächsten Animation in der Warteschlange zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns the absolute playback timestamp of the animation node with name "
-"[code]id[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Binds a new [Animation] from the [member master_player] to the "
-"[AnimationTreePlayer]'s animation node with name [code]id[/code]."
-msgstr ""
-"Bindet eine neue [Animation] aus dem [member master_player] an den "
-"Animationsknoten des [AnimationTreePlayer] mit dem Namen [code]id[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], the animation node with ID "
-"[code]id[/code] turns off the track modifying the property at [code]path[/"
-"code]. The modified node's children continue to animate."
-msgstr ""
-"Wenn [code]enable[/code] [code]true[/code] ist, schaltet der "
-"Animationsknoten mit der ID [code]id[/code] die Spur aus, die die "
-"Eigenschaft bei [code]path[/code] ändert. Die Kinder des geänderten Knotens "
-"werden weiterhin animiert."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Binds the [Animation] named [code]source[/code] from [member master_player] "
-"to the animation node [code]id[/code]. Recalculates caches."
-msgstr ""
-"Bindet die [Animation] namens [code]source[/code] vom [member master_player] "
-"an den Animationsknoten [code]id[/code]. Berechnet die Caches neu."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns whether node [code]id[/code] and [code]dst_id[/code] are connected "
-"at the specified slot."
-msgstr ""
-"Liefert [code]wahr[/code] als Ergebnis wenn [code]a[/code] und [code]b[/"
-"code] ungefähr gleich sind."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the blend amount of a Blend2 node given its name."
-msgstr "Gibt die Anzahl der Tasten in einer bestimmten Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the blend amount of a Blend2 node given its name and value.\n"
-"A Blend2 node blends two animations (A and B) with the amount between 0 and "
-"1.\n"
-"At 0, output is input A. Towards 1, the influence of A gets lessened, the "
-"influence of B gets raised. At 1, output is input B."
-msgstr ""
-"Legt den Überblendungswert eines Blend2-Knotens mit seinem Namen und Wert "
-"fest.\n"
-"Ein Blend2-Knoten überblendet zwei Animationen (A und B) mit einem Wert "
-"zwischen 0 und 1.\n"
-"Bei 0 ist die Ausgabe die Eingabe A. In Richtung 1 wird der Einfluss von A "
-"verringert, der Einfluss von B erhöht. Bei 1 ist die Ausgabe die Eingabe B."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], the Blend2 node with name "
-"[code]id[/code] turns off the track modifying the property at [code]path[/"
-"code]. The modified node's children continue to animate."
-msgstr ""
-"Wenn [code]enable[/code] [code]true[/code] ist, schaltet der Blend2-Knoten "
-"mit dem Namen [code]id[/code] die Spur aus, die die Eigenschaft bei "
-"[code]path[/code] ändert. Die Kinder des geänderten Knotens werden weiterhin "
-"animiert."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the blend amount of a Blend3 node given its name."
-msgstr "Gibt die Anzahl der Tasten in einer bestimmten Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the blend amount of a Blend3 node given its name and value.\n"
-"A Blend3 Node blends three animations (A, B-, B+) with the amount between -1 "
-"and 1.\n"
-"At -1, output is input B-. From -1 to 0, the influence of B- gets lessened, "
-"the influence of A gets raised and the influence of B+ is 0. At 0, output is "
-"input A. From 0 to 1, the influence of A gets lessened, the influence of B+ "
-"gets raised and the influence of B+ is 0. At 1, output is input B+."
-msgstr ""
-"Legt den Überblendungsgrad eines Blend3-Knotens mit seinem Namen und Wert "
-"fest.\n"
-"Ein Blend3-Knoten überblendet drei Animationen (A, B-, B+) mit einem Wert "
-"zwischen -1 und 1.\n"
-"Bei -1 ist die Ausgabe die Eingabe B-. Von -1 bis 0 wird der Einfluss von B- "
-"verringert, der Einfluss von A wird erhöht und der Einfluss von B+ ist 0. "
-"Bei 0 ist die Ausgabe die Eingabe A. Von 0 bis 1 wird der Einfluss von A "
-"verringert, der Einfluss von B+ wird erhöht und der Einfluss von B+ ist 0. "
-"Bei 1 ist die Ausgabe die Eingabe B+."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the blend amount of a Blend4 node given its name."
-msgstr "Gibt die Anzahl der Tasten in einer bestimmten Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the blend amount of a Blend4 node given its name and value.\n"
-"A Blend4 Node blends two pairs of animations.\n"
-"The two pairs are blended like Blend2 and then added together."
-msgstr ""
-"Legt den Überblendungsgrad eines Blend4-Knotens mit seinem Namen und Wert "
-"fest.\n"
-"Ein Blend4-Knoten blendet zwei Paare von Animationen.\n"
-"Die beiden Paare werden wie Blend2 überblendet und dann addiert."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Connects node [code]id[/code] to [code]dst_id[/code] at the specified input "
-"slot."
-msgstr "Trennt das Node, der mit dem angegebenen Eingang verbunden ist."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Disconnects nodes connected to [code]id[/code] at the specified input slot."
-msgstr "Trennt das Node, der mit dem angegebenen Eingang verbunden ist."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Returns a [PoolStringArray] containing the name of all nodes."
-msgstr "Gibt ein [PoolStringArray] zurück, das die Namen aller Knoten enthält."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the mix amount of a Mix node given its name."
-msgstr "Gibt die Anzahl der Tasten in einer bestimmten Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the mix amount of a Mix node given its name and value.\n"
-"A Mix node adds input b to input a by the amount given by ratio."
-msgstr ""
-"Legt die Mischmenge eines Mix-Knotens fest, dessen Name und Wert angegeben "
-"ist.\n"
-"Ein Mix-Knoten fügt Eingang B zu Eingang A um den durch ratio angegebenen "
-"Betrag hinzu."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Check if a node exists (by name)."
-msgstr "Prüfen, ob ein Knoten existiert (nach Name)."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Returns the input count for a given node. Different types of nodes have "
-"different amount of inputs."
-msgstr ""
-"Gibt die Anzahl der Eingaben für einen bestimmten Knoten zurück. "
-"Verschiedene Knotentypen haben eine unterschiedliche Anzahl von Eingängen."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the input source for a given node input."
-msgstr "Gibt den Interpolationstyp einer gegebenen Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns position of a node in the graph given its name."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Gets the node type, will return from [enum NodeType] enum."
-msgstr ""
-"Ruft den Knotentyp ab, wird von der Aufzählung [enum NodeType] zurückgegeben."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Renames a node in the graph."
-msgstr "Löscht das übergebene Node aus dem Graphen."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Sets the position of a node in the graph given its name and position."
-msgstr "Legt das übergebene Node als das Ende des Graphen fest."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the autostart delay of a OneShot node given its name."
-msgstr ""
-"Gibt den Wert eines gegebenen Schlüssels in einer gegebenen Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the autostart random delay of a OneShot node given its name."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the fade in time of a OneShot node given its name."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns the fade out time of a OneShot node given its name."
-msgstr ""
-"Gibt den Wert eines gegebenen Schlüssels in einer gegebenen Spur zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns whether a OneShot node will auto restart given its name."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Returns whether a OneShot node is active given its name."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the autorestart property of a OneShot node given its name and value."
-msgstr ""
-"Legt die Autorestart-Eigenschaft eines OneShot-Knotens mit dessen Namen und "
-"Wert fest."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the autorestart delay of a OneShot node given its name and value in "
-"seconds."
-msgstr ""
-"Legt die Autostart-Verzögerung eines OneShot-Knotens fest, wobei der Name "
-"und der Wert in Sekunden angegeben werden."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the autorestart random delay of a OneShot node given its name and value "
-"in seconds."
-msgstr ""
-"Legt die Zufallsverzögerung für den Autorestart eines OneShot-Knotens fest, "
-"wobei der Name und der Wert in Sekunden angegeben werden."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the fade in time of a OneShot node given its name and value in seconds."
-msgstr ""
-"Legt die Einblendzeit eines OneShot-Knotens mit seinem Namen und einem Wert "
-"in Sekunden fest."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the fade out time of a OneShot node given its name and value in seconds."
-msgstr ""
-"Legt die Ausblendzeit eines OneShot-Knotens fest, wobei der Name und der "
-"Wert in Sekunden angegeben werden."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], the OneShot node with ID "
-"[code]id[/code] turns off the track modifying the property at [code]path[/"
-"code]. The modified node's children continue to animate."
-msgstr ""
-"Wenn [code]enable[/code] [code]true[/code] ist, schaltet der OneShot-Knoten "
-"mit der ID [code]id[/code] die Spur aus, die die Eigenschaft bei [code]path[/"
-"code] ändert. Die Kinder des geänderten Knotens werden weiterhin animiert"
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Starts a OneShot node given its name."
-msgstr "Startet die Wiedergabe der angegebenen Animation."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Stops the OneShot node with name [code]id[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Manually recalculates the cache of track information generated from "
-"animation nodes. Needed when external sources modify the animation nodes' "
-"state."
-msgstr ""
-"Berechnet den Cache der von Animationsknoten erzeugten Spurinformationen "
-"manuell neu. Wird benötigt, wenn externe Quellen den Zustand der "
-"Animationsknoten ändern."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Removes the animation node with name [code]id[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Resets this [AnimationTreePlayer]."
-msgstr "Setzt diesen [AnimationTreePlayer] zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns the time scale value of the TimeScale node with name [code]id[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the time scale of the TimeScale node with name [code]id[/code] to "
-"[code]scale[/code].\n"
-"The TimeScale node is used to speed [Animation]s up if the scale is above 1 "
-"or slow them down if it is below 1.\n"
-"If applied after a blend or mix, affects all input animations to that blend "
-"or mix."
-msgstr ""
-"Setzt die Zeitskala des TimeScale-Knotens mit dem Namen [code]id[/code] auf "
-"[code]scale[/code].\n"
-"Der TimeScale-Knoten wird verwendet, um [Animationen] zu beschleunigen, wenn "
-"die Skala über 1 liegt, oder sie zu verlangsamen, wenn sie unter 1 liegt.\n"
-"Wenn er nach einer Überblendung oder Mischung angewendet wird, wirkt er sich "
-"auf alle Eingangsanimationen für diese Überblendung oder Mischung aus."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Sets the time seek value of the TimeSeek node with name [code]id[/code] to "
-"[code]seconds[/code].\n"
-"This functions as a seek in the [Animation] or the blend or mix of "
-"[Animation]s input in it."
-msgstr ""
-"Setzt den Zeitsuchwert des TimeSeek-Knotens mit dem Namen [code]id[/code] "
-"auf [code]seconds[/code].\n"
-"Dies funktioniert wie ein Suchlauf in der [Animation] oder der Mischung oder "
-"dem Mix von [Animation]en, die darin eingegeben werden."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Deletes the input at [code]input_idx[/code] for the transition node with "
-"name [code]id[/code]."
-msgstr ""
-"Ändert die Indexposition der Spur [code]idx[/code] auf die in [code]to_idx[/"
-"code] definierte."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns the index of the currently evaluated input for the transition node "
-"with name [code]id[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Returns the number of inputs for the transition node with name [code]id[/"
-"code]. You can add inputs by right-clicking on the transition node."
-msgstr ""
-"Gibt die Anzahl der Eingänge für den Übergangsknoten mit dem Namen [code]id[/"
-"code] zurück. Sie können Eingaben hinzufügen, indem Sie mit der rechten "
-"Maustaste auf den Übergangsknoten klicken."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"Returns the cross fade time for the transition node with name [code]id[/"
-"code]."
-msgstr "Gibt das Kreuzprodukt aus diesem Vektor und [code]mit[/code] zurück."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Returns [code]true[/code] if the input at [code]input_idx[/code] on the "
-"transition node with name [code]id[/code] is set to automatically advance to "
-"the next input upon completion."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Eingabe an [code]input_idx[/code] "
-"auf dem Übergangsknoten mit dem Namen [code]id[/code] so eingestellt ist, "
-"dass sie nach Abschluss automatisch zur nächsten Eingabe übergeht."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"The transition node with name [code]id[/code] sets its current input at "
-"[code]input_idx[/code]."
-msgstr ""
-"Ändert die Indexposition der Spur [code]idx[/code] auf die in [code]to_idx[/"
-"code] definierte."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"The transition node with name [code]id[/code] advances to its next input "
-"automatically when the input at [code]input_idx[/code] completes."
-msgstr ""
-"Der Übergangsknoten mit dem Namen [code]id[/code] geht automatisch zu seiner "
-"nächsten Eingabe über, wenn die Eingabe an [code]input_idx[/code] "
-"abgeschlossen ist."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"Resizes the number of inputs available for the transition node with name "
-"[code]id[/code]."
-msgstr ""
-"Verändert die Anzahl der verfügbaren Eingänge für den Übergangsknoten mit "
-"dem Namen [code]id[/code]."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"The transition node with name [code]id[/code] sets its cross fade time to "
-"[code]time_sec[/code]."
-msgstr ""
-"Ändert die Indexposition der Spur [code]idx[/code] auf die in [code]to_idx[/"
-"code] definierte."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the [AnimationTreePlayer] is able to play animations."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"The node from which to relatively access other nodes.\n"
-"It accesses the bones, so it should point to the same node the "
-"[AnimationPlayer] would point its Root Node at."
-msgstr ""
-"Der Knoten, von dem aus relativ auf andere Knoten zugegriffen werden kann.\n"
-"Er greift auf die Bones zu, sollte also auf denselben Knoten zeigen, auf den "
-"der [AnimationPlayer] seinen Root Knoten zeigen würde."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid ""
-"The path to the [AnimationPlayer] from which this [AnimationTreePlayer] "
-"binds animations to animation nodes.\n"
-"Once set, [Animation] nodes can be added to the [AnimationTreePlayer]."
-msgstr ""
-"Der Pfad zum [AnimationPlayer], von dem dieser [AnimationTreePlayer] "
-"Animationen an Animationsknoten bindet.\n"
-"Einmal festgelegt, können [Animation]-Knoten zum [AnimationTreePlayer] "
-"hinzugefügt werden."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "The thread in which to update animations."
-msgstr "Die Prozessmeldung, in der die Animationen aktualisiert werden sollen."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Output node."
-msgstr "Ausgangsknoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Animation node."
-msgstr "unbekanntes Node."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "OneShot node."
-msgstr "Einmaliger Timer."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Mix node."
-msgstr "Mischknoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Blend2 node."
-msgstr "Blend2 Knoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Blend3 node."
-msgstr "Blend3 Knoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "Blend4 node."
-msgstr "Blend4 Knoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "TimeScale node."
-msgstr "TimeScale Knoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-msgid "TimeSeek node."
-msgstr "TimeSeek Knoten."
-
-#: doc/classes/AnimationTreePlayer.xml
-#, fuzzy
-msgid "Transition node."
-msgstr "Der Übergangstyp."
-
-#: doc/classes/Area.xml
-#, fuzzy
-msgid "3D area for detection and physics and audio influence."
-msgstr "2D-Bereich zur Erkennung und 2D-Physik-Einfluss."
-
-#: doc/classes/Area.xml
-msgid ""
-"3D area that detects [CollisionObject] nodes overlapping, entering, or "
-"exiting. Can also alter or override local physics parameters (gravity, "
-"damping) and route audio to a custom audio bus.\n"
-"To give the area its shape, add a [CollisionShape] or a [CollisionPolygon] "
-"node as a [i]direct[/i] child (or add multiple such nodes as direct "
-"children) of the area.\n"
-"[b]Warning:[/b] See [ConcavePolygonShape] (also called \"trimesh\") for a "
-"warning about possibly unexpected behavior when using that shape for an area."
-msgstr ""
-
-#: doc/classes/Area.xml doc/classes/QuadMesh.xml doc/classes/Viewport.xml
-#: doc/classes/ViewportTexture.xml
-msgid "GUI in 3D Demo"
-msgstr "Benutzeroberfläche in 3D-Demo"
-
-#: doc/classes/Area.xml
-msgid ""
-"Returns a list of intersecting [Area]s. The overlapping area's [member "
-"CollisionObject.collision_layer] must be part of this area's [member "
-"CollisionObject.collision_mask] in order to be detected.\n"
-"For performance reasons (collisions are all processed at the same time) this "
-"list is modified once during the physics step, not immediately after objects "
-"are moved. Consider using signals instead."
-msgstr ""
-"Gibt zurück eine Liste der sich überschneidenden [Area]s. Das [member "
-"CollisionObject.collision_layer] des überlappenden Areas muss mit der "
-"[member CollisionObject.collision_mask] dieser Area übereinstimmen, um "
-"erkannt zu werden.\n"
-"Aus Leistungsgründen (Kollisionen werden alle gleichzeitig verarbeitet) wird "
-"diese Liste nur einmal während des Physikschritts geändert, nicht sofort "
-"nach dem Verschieben von Objekten. Dafür sollte die Verwendung von Signalen "
-"erwogen werden."
-
-#: doc/classes/Area.xml
-msgid ""
-"Returns a list of intersecting [PhysicsBody]s. The overlapping body's "
-"[member CollisionObject.collision_layer] must be part of this area's [member "
-"CollisionObject.collision_mask] in order to be detected.\n"
-"For performance reasons (collisions are all processed at the same time) this "
-"list is modified once during the physics step, not immediately after objects "
-"are moved. Consider using signals instead."
-msgstr ""
-"Gibt zurück eine Liste der sich überschneidenden [PhysicsBody2D]s. Das "
-"[member CollisionObject.collision_layer] des überlappenden Bodys muss mit "
-"der [member CollisionObject.collision_mask] dieser Area übereinstimmen, um "
-"erkannt zu werden.\n"
-"Aus Leistungsgründen (Kollisionen werden alle gleichzeitig verarbeitet) wird "
-"diese Liste nur einmal während des Physikschritts geändert, nicht sofort "
-"nach dem Verschieben von Objekten. Dafür sollte die Verwendung von Signalen "
-"erwogen werden."
-
-#: doc/classes/Area.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the given area overlaps the Area.\n"
-"[b]Note:[/b] The result of this test is not immediate after moving objects. "
-"For performance, list of overlaps is updated once per frame and before the "
-"physics step. Consider using signals instead."
-msgstr ""
-"Wenn [code]true[/code], überlappt der angegebene Bereich den Area2D.\n"
-"[b]Hinweis:[/b] Das Ergebnis dieses Tests ist nach dem Bewegen von Objekten "
-"nicht sofort sichtbar. Aus Performancegründen wird die Liste der "
-"Überlappungen einmal pro Frame und vor dem Physikschritt aktualisiert. "
-"Erwägen Sie stattdessen die Verwendung von Signalen."
-
-#: doc/classes/Area.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the given physics body overlaps the Area.\n"
-"[b]Note:[/b] The result of this test is not immediate after moving objects. "
-"For performance, list of overlaps is updated once per frame and before the "
-"physics step. Consider using signals instead.\n"
-"The [code]body[/code] argument can either be a [PhysicsBody] or a [GridMap] "
-"instance (while GridMaps are not physics body themselves, they register "
-"their tiles with collision shapes as a virtual physics body)."
-msgstr ""
-"Wenn [code]true[/code], überlappt der angegebene Physikkörper die Area2D.\n"
-"[b]Hinweis:[/b] Das Ergebnis dieses Tests ist nicht unmittelbar nach dem "
-"Bewegen von Objekten. Aus Performancegründen wird die Liste der "
-"Überlappungen einmal pro Frame und vor dem Physikschritt aktualisiert. "
-"Erwägen Sie stattdessen die Verwendung von Signalen.\n"
-"Das Argument [code]body[/code] kann entweder ein [PhysicsBody2D] oder eine "
-"[TileMap]-Instanz sein (während TileMaps selbst keine Physikkörper sind, "
-"registrieren sie ihre Kacheln mit Kollisionsformen als virtuellen "
-"Physikkörper)."
-
-#: doc/classes/Area.xml
-#, fuzzy
-msgid ""
-"The rate at which objects stop spinning in this area. Represents the angular "
-"velocity lost per second.\n"
-"See [member ProjectSettings.physics/3d/default_angular_damp] for more "
-"details about damping."
-msgstr ""
-"Die Rate, mit der Objekte in diesem Bereich aufhören, sich zu drehen. Stellt "
-"den Winkelgeschwindigkeitsverlust pro Sekunde dar. Die Werte reichen von "
-"[code]0[/code] (keine Dämpfung) bis [code]1[/code] (volle Dämpfung)."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid "The name of the area's audio bus."
-msgstr "Der Name des zugewiesenen Audio-Bus für diese Area."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"If [code]true[/code], the area's audio bus overrides the default audio bus."
-msgstr ""
-"Wenn [code]true[/code], hat der Audiobus der Area Vorrang gegenüber dem "
-"Standard-Audiobus."
-
-#: doc/classes/Area.xml
-msgid ""
-"The area's gravity intensity (in meters per second squared). This value "
-"multiplies the gravity vector. This is useful to alter the force of gravity "
-"without altering its direction."
-msgstr ""
-"Die Gravitationsintensität des Area (in m/s²). Dieser Wert multipliziert den "
-"Gravitationsvektor. Dies ist nützlich, um die Schwerkraft zu beeinflussen, "
-"ohne ihre Richtung zu ändern."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"The falloff factor for point gravity. The greater the value, the faster "
-"gravity decreases with distance."
-msgstr ""
-"Der Falloff-Faktor für die Punktgravitation. Je größer der Wert, desto "
-"schneller nimmt die Schwerkraft mit der Entfernung ab."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"If [code]true[/code], gravity is calculated from a point (set via [member "
-"gravity_vec]). See also [member space_override]."
-msgstr ""
-"Wenn [code]true[/code], wird die Schwerkraft von einem Punkt aus berechnet "
-"(eingestellt über [member gravity_vec]). Siehe auch [member space_override]."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"The area's gravity vector (not normalized). If gravity is a point (see "
-"[member gravity_point]), this will be the point of attraction."
-msgstr ""
-"Der Gravitationsvektor der Area (nicht normalisiert). Ist Gravitation als "
-"Punkt festgelegt (siehe [member gravity_point]), wird dies der "
-"Anziehungspunkt sein."
-
-#: doc/classes/Area.xml
-#, fuzzy
-msgid ""
-"The rate at which objects stop moving in this area. Represents the linear "
-"velocity lost per second.\n"
-"See [member ProjectSettings.physics/3d/default_linear_damp] for more details "
-"about damping."
-msgstr ""
-"Die Rate, mit der sich Objekte in diesem Bereich nicht mehr bewegen. Stellt "
-"den linearen Geschwindigkeitsverlust pro Sekunde dar. Die Werte reichen von "
-"[code]0[/code] (keine Dämpfung) bis [code]1[/code] (volle Dämpfung)."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid "If [code]true[/code], other monitoring areas can detect this area."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"If [code]true[/code], the area detects bodies or areas entering and exiting "
-"it."
-msgstr ""
-"If [code]true[/code], erkennt die Area, ob Bodys oder andere Areas ihn "
-"betreten oder verlassen."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid "The area's priority. Higher priority areas are processed first."
-msgstr ""
-"Die Priorität der Area. Areas mit höherer Priorität werden zuerst bearbeitet."
-
-#: doc/classes/Area.xml
-msgid ""
-"The degree to which this area applies reverb to its associated audio. Ranges "
-"from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision."
-msgstr ""
-"Der Grad, in dem dieser Bereich Hall auf das zugehörige Audiomaterial "
-"anwendet. Der Bereich reicht von [code]0[/code] bis [code]1[/code] mit einer "
-"Genauigkeit von [code]0.1[/code]."
-
-#: doc/classes/Area.xml
-msgid "If [code]true[/code], the area applies reverb to its associated audio."
-msgstr ""
-"Wenn [code]true[/code], wendet der Bereich Hall auf das zugehörige "
-"Audiomaterial an."
-
-#: doc/classes/Area.xml
-msgid "The reverb bus name to use for this area's associated audio."
-msgstr "Der Name des zugewiesenen Reverb-Bus für diese Area."
-
-#: doc/classes/Area.xml
-msgid ""
-"The degree to which this area's reverb is a uniform effect. Ranges from "
-"[code]0[/code] to [code]1[/code] with [code]0.1[/code] precision."
-msgstr ""
-"Der Grad, bis zu dem der Reverb der Area gleichmäßig wirkt. Reicht von "
-"[code]0[/code] bis [code]1[/code], mit einer Schrittgenauigkeit von "
-"[code]0.1[/code]."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"Override mode for gravity and damping calculations within this area. See "
-"[enum SpaceOverride] for possible values."
-msgstr ""
-"Überschreibungsmodus für Schwerkraft- und Dämpfungsberechnungen innerhalb "
-"dieses Bereichs. Siehe [enum SpaceOverride] für mögliche Werte."
-
-#: doc/classes/Area.xml
-msgid ""
-"Emitted when another Area enters this Area. Requires [member monitoring] to "
-"be set to [code]true[/code].\n"
-"[code]area[/code] the other Area."
-msgstr ""
-"Wird ausgesendet, wenn ein anderer Bereich diesen Bereich betritt. "
-"Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
-"[code]area[/code] der andere Bereich."
-
-#: doc/classes/Area.xml
-msgid ""
-"Emitted when another Area exits this Area. Requires [member monitoring] to "
-"be set to [code]true[/code].\n"
-"[code]area[/code] the other Area."
-msgstr ""
-"Wird ausgesendet, wenn ein anderer Bereich diesen Bereich verlässt. "
-"Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
-"[code]area[/code] der andere Bereich."
-
-#: doc/classes/Area.xml
-msgid ""
-"Emitted when one of another Area's [Shape]s enters one of this Area's "
-"[Shape]s. Requires [member monitoring] to be set to [code]true[/code].\n"
-"[code]area_rid[/code] the [RID] of the other Area's [CollisionObject] used "
-"by the [PhysicsServer].\n"
-"[code]area[/code] the other Area.\n"
-"[code]area_shape_index[/code] the index of the [Shape] of the other Area "
-"used by the [PhysicsServer]. Get the [CollisionShape] node with [code]area."
-"shape_owner_get_owner(area_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape] of this Area used by "
-"the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
-"shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-"Wird ausgesendet, wenn [Shape]s eines anderen Bereichs in [Shape]s dieses "
-"Bereichs eintreten. Erfordert, dass [member monitoring] auf [code]true[/"
-"code] gesetzt ist.\n"
-"[code]area_rid[/code] die [RID] des vom [PhysicsServer] verwendeten "
-"[CollisionObject] des anderen Bereichs.\n"
-"[code]area[/code] die andere Area.\n"
-"[code]area_shape_index[/code] der Index des [Shape] des anderen Bereichs, "
-"der vom [PhysicsServer] verwendet wird. Holen Sie den [CollisionShape] "
-"Knoten mit [code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
-"[code]local_shape_index[/code] der Index des [Shape] dieses Bereichs, der "
-"vom [PhysicsServer] verwendet wird. Holen Sie den [CollisionShape] Knoten "
-"mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-
-#: doc/classes/Area.xml
-msgid ""
-"Emitted when a [PhysicsBody] or [GridMap] enters this Area. Requires [member "
-"monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the "
-"[MeshLibrary] has Collision [Shape]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody] or [GridMap]."
-msgstr ""
-"Wird ausgesendet, wenn ein [PhysicsBody] oder eine [GridMap] diesen Bereich "
-"betritt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
-"ist. [GridMap]s werden erkannt, wenn die [MeshLibrary] Kollisions-[Shape]s "
-"hat.\n"
-"[code]body[/code] die [Node] des anderen [PhysicsBody] oder der [GridMap], "
-"wenn er im Baum existiert."
-
-#: doc/classes/Area.xml
-msgid ""
-"Emitted when a [PhysicsBody] or [GridMap] exits this Area. Requires [member "
-"monitoring] to be set to [code]true[/code]. [GridMap]s are detected if the "
-"[MeshLibrary] has Collision [Shape]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody] or [GridMap]."
-msgstr ""
-"Wird ausgesendet, wenn ein [PhysicsBody] oder eine [GridMap] diesen Bereich "
-"verlässt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
-"ist. [GridMap]s werden erkannt, wenn die [MeshLibrary] Kollisions-[Shape]s "
-"hat.\n"
-"[code]body[/code] der [Node], falls im Baum vorhanden, des anderen "
-"[PhysicsBody] oder der [GridMap]."
-
-#: doc/classes/Area.xml
-msgid ""
-"Emitted when one of a [PhysicsBody] or [GridMap]'s [Shape]s enters one of "
-"this Area's [Shape]s. Requires [member monitoring] to be set to [code]true[/"
-"code]. [GridMap]s are detected if the [MeshLibrary] has Collision [Shape]s.\n"
-"[code]body_rid[/code] the [RID] of the [PhysicsBody] or [MeshLibrary]'s "
-"[CollisionObject] used by the [PhysicsServer].\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the [PhysicsBody] "
-"or [GridMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape] of the [PhysicsBody] "
-"or [GridMap] used by the [PhysicsServer]. Get the [CollisionShape] node with "
-"[code]body.shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape] of this Area used by "
-"the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
-"shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-"Wird ausgesendet, wenn eine [Shape] eines [PhysicsBody] oder einer [GridMap] "
-"in eine [Shape] dieses Bereichs eintritt. Erfordert, dass [member "
-"monitoring] auf [code]true[/code] gesetzt ist. [GridMap]s werden erkannt, "
-"wenn die [MeshLibrary] Kollisions-[Shape]s hat.\n"
-"[code]body_rid[/code] die [RID] des [PhysicsBody]s oder [MeshLibrary]s "
-"[CollisionObject], das vom [PhysicsServer] verwendet wird.\n"
-"[code]body[/code] der [Node] des [PhysicsBody] oder der [GridMap], wenn er "
-"im Baum existiert.\n"
-"[code]body_shape_index[/code] der Index des [Shape]s des [PhysicsBody] oder "
-"der [GridMap], der vom [PhysicsServer] verwendet wird. Holen Sie den "
-"[CollisionShape] Knoten mit [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] der Index des [Shape]s dieses Bereichs, der "
-"vom [PhysicsServer] verwendet wird. Holen Sie den [CollisionShape] Knoten "
-"mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid "This area does not affect gravity/damping."
-msgstr "Diese Area hat keinen Einfluss auf die Gravitation/Dämpfung."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"This area adds its gravity/damping values to whatever has been calculated so "
-"far (in [member priority] order)."
-msgstr ""
-"Dieser Bereich addiert seine Schwerkraft-/Dämpfungswerte zu den bisher "
-"berechneten Werten (in der Reihenfolge der [member priority])."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"This area adds its gravity/damping values to whatever has been calculated so "
-"far (in [member priority] order), ignoring any lower priority areas."
-msgstr ""
-"Dieser Bereich addiert seine Schwere-/Dämpfungswerte zu den bisher "
-"berechneten Werten (in der Reihenfolge der [member priority]) und ignoriert "
-"alle Bereiche mit niedrigerer Priorität."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"This area replaces any gravity/damping, even the defaults, ignoring any "
-"lower priority areas."
-msgstr ""
-"Dieser Bereich ersetzt jede Schwerkraft/Dämpfung, auch die Standardwerte, "
-"und ignoriert alle Bereiche mit niedrigerer Priorität."
-
-#: doc/classes/Area.xml doc/classes/Area2D.xml
-msgid ""
-"This area replaces any gravity/damping calculated so far (in [member "
-"priority] order), but keeps calculating the rest of the areas."
-msgstr ""
-"Dieser Bereich ersetzt alle bisher berechneten Schwerkraft-/Dämpfungswerte "
-"(in der Reihenfolge der [member priority]), berechnet aber weiterhin die "
-"übrigen Bereiche."
-
-#: doc/classes/Area2D.xml
-#, fuzzy
-msgid "2D area for detection and physics and audio influence."
-msgstr "2D-Bereich zur Erkennung und 2D-Physik-Einfluss."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"2D area that detects [CollisionObject2D] nodes overlapping, entering, or "
-"exiting. Can also alter or override local physics parameters (gravity, "
-"damping) and route audio to a custom audio bus.\n"
-"To give the area its shape, add a [CollisionShape2D] or a "
-"[CollisionPolygon2D] node as a [i]direct[/i] child (or add multiple such "
-"nodes as direct children) of the area.\n"
-"[b]Warning:[/b] See [ConcavePolygonShape2D] for a warning about possibly "
-"unexpected behavior when using that shape for an area."
-msgstr ""
-
-#: doc/classes/Area2D.xml
-msgid "Using Area2D"
-msgstr "Verwendung von Area2D"
-
-#: doc/classes/Area2D.xml doc/classes/CollisionShape2D.xml
-#: doc/classes/RectangleShape2D.xml
-msgid "2D Pong Demo"
-msgstr "2D Pong Demo"
-
-#: doc/classes/Area2D.xml doc/classes/Camera2D.xml
-#: doc/classes/KinematicBody2D.xml doc/classes/TileMap.xml
-#: doc/classes/TileSet.xml
-msgid "2D Platformer Demo"
-msgstr "2D Platformer Demo"
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Returns a list of intersecting [Area2D]s. The overlapping area's [member "
-"CollisionObject2D.collision_layer] must be part of this area's [member "
-"CollisionObject2D.collision_mask] in order to be detected.\n"
-"For performance reasons (collisions are all processed at the same time) this "
-"list is modified once during the physics step, not immediately after objects "
-"are moved. Consider using signals instead."
-msgstr ""
-"Gibt zurück eine Liste der sich überschneidenden [Area2D]s. Das [member "
-"CollisionObject2D.collision_layer] des überlappenden Areas muss mit der "
-"[member CollisionObject2D.collision_mask] dieser Area übereinstimmen, um "
-"erkannt zu werden.\n"
-"Aus Leistungsgründen (Kollisionen werden alle gleichzeitig verarbeitet) wird "
-"diese Liste nur einmal während des Physikschritts geändert, nicht sofort "
-"nach dem Verschieben von Objekten. Dafür sollte die Verwendung von Signalen "
-"erwogen werden."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Returns a list of intersecting [PhysicsBody2D]s. The overlapping body's "
-"[member CollisionObject2D.collision_layer] must be part of this area's "
-"[member CollisionObject2D.collision_mask] in order to be detected.\n"
-"For performance reasons (collisions are all processed at the same time) this "
-"list is modified once during the physics step, not immediately after objects "
-"are moved. Consider using signals instead."
-msgstr ""
-"Gibt zurück eine Liste der sich überschneidenden [PhysicsBody2D]s. Das "
-"[member CollisionObject2D.collision_layer] des überlappenden Areas muss mit "
-"der [member CollisionObject2D.collision_mask] dieser Area übereinstimmen, um "
-"erkannt zu werden.\n"
-"Aus Leistungsgründen (Kollisionen werden alle gleichzeitig verarbeitet) wird "
-"diese Liste nur einmal während des Physikschritts geändert, nicht sofort "
-"nach dem Verschieben von Objekten. Dafür sollte die Verwendung von Signalen "
-"erwogen werden."
-
-#: doc/classes/Area2D.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the given area overlaps the Area2D.\n"
-"[b]Note:[/b] The result of this test is not immediate after moving objects. "
-"For performance, the list of overlaps is updated once per frame and before "
-"the physics step. Consider using signals instead."
-msgstr ""
-"Wenn [code]true[/code], überlappt der angegebene Bereich den Area2D.\n"
-"[b]Hinweis:[/b] Das Ergebnis dieses Tests ist nach dem Bewegen von Objekten "
-"nicht sofort sichtbar. Aus Performancegründen wird die Liste der "
-"Überlappungen einmal pro Frame und vor dem Physikschritt aktualisiert. "
-"Erwägen Sie stattdessen die Verwendung von Signalen."
-
-#: doc/classes/Area2D.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the given physics body overlaps the Area2D.\n"
-"[b]Note:[/b] The result of this test is not immediate after moving objects. "
-"For performance, list of overlaps is updated once per frame and before the "
-"physics step. Consider using signals instead.\n"
-"The [code]body[/code] argument can either be a [PhysicsBody2D] or a "
-"[TileMap] instance (while TileMaps are not physics bodies themselves, they "
-"register their tiles with collision shapes as a virtual physics body)."
-msgstr ""
-"Wenn [code]true[/code], überlappt der angegebene Physikkörper die Area2D.\n"
-"[b]Hinweis:[/b] Das Ergebnis dieses Tests ist nicht unmittelbar nach dem "
-"Bewegen von Objekten. Aus Performancegründen wird die Liste der "
-"Überlappungen einmal pro Frame und vor dem Physikschritt aktualisiert. "
-"Erwägen Sie stattdessen die Verwendung von Signalen.\n"
-"Das Argument [code]body[/code] kann entweder ein [PhysicsBody2D] oder eine "
-"[TileMap]-Instanz sein (während TileMaps selbst keine Physikkörper sind, "
-"registrieren sie ihre Kacheln mit Kollisionsformen als virtuellen "
-"Physikkörper)."
-
-#: doc/classes/Area2D.xml
-#, fuzzy
-msgid ""
-"The rate at which objects stop spinning in this area. Represents the angular "
-"velocity lost per second.\n"
-"See [member ProjectSettings.physics/2d/default_angular_damp] for more "
-"details about damping."
-msgstr ""
-"Die Rate, mit der Objekte in diesem Bereich aufhören, sich zu drehen. Stellt "
-"den Winkelgeschwindigkeitsverlust pro Sekunde dar. Die Werte reichen von "
-"[code]0[/code] (keine Dämpfung) bis [code]1[/code] (volle Dämpfung)."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"The area's gravity intensity (in pixels per second squared). This value "
-"multiplies the gravity vector. This is useful to alter the force of gravity "
-"without altering its direction."
-msgstr ""
-"Die Gravitationsintensität des Area (in px/s²). Dieser Wert multipliziert "
-"den Gravitationsvektor. Dies ist nützlich, um die Schwerkraft zu "
-"beeinflussen, ohne ihre Richtung zu ändern."
-
-#: doc/classes/Area2D.xml
-#, fuzzy
-msgid ""
-"The rate at which objects stop moving in this area. Represents the linear "
-"velocity lost per second.\n"
-"See [member ProjectSettings.physics/2d/default_linear_damp] for more details "
-"about damping."
-msgstr ""
-"Die Rate, mit der sich Objekte in diesem Bereich nicht mehr bewegen. Stellt "
-"den linearen Geschwindigkeitsverlust pro Sekunde dar. Die Werte reichen von "
-"[code]0[/code] (keine Dämpfung) bis [code]1[/code] (volle Dämpfung)."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when another Area2D enters this Area2D. Requires [member monitoring] "
-"to be set to [code]true[/code].\n"
-"[code]area[/code] the other Area2D."
-msgstr ""
-"Wird ausgesendet, wenn ein anderes Area2D dieses Area2D betritt. Erfordert, "
-"dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
-"[code]area[/code] die andere Area2D."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when another Area2D exits this Area2D. Requires [member monitoring] "
-"to be set to [code]true[/code].\n"
-"[code]area[/code] the other Area2D."
-msgstr ""
-"Wird ausgesendet, wenn ein anderes Area2D dieses Area2D verlässt. Erfordert, "
-"dass [member monitoring] auf [code]true[/code] gesetzt ist.\n"
-"[code]area[/code] die andere Area2D."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when one of another Area2D's [Shape2D]s enters one of this Area2D's "
-"[Shape2D]s. Requires [member monitoring] to be set to [code]true[/code].\n"
-"[code]area_rid[/code] the [RID] of the other Area2D's [CollisionObject2D] "
-"used by the [Physics2DServer].\n"
-"[code]area[/code] the other Area2D.\n"
-"[code]area_shape_index[/code] the index of the [Shape2D] of the other Area2D "
-"used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
-"[code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape2D] of this Area2D "
-"used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
-"[code]self.shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-"Wird ausgesendet, wenn [Shape2D]s eines anderen Area2Ds in [Shape2D]s dieses "
-"Area2Ds verlassen. Erfordert, dass [member monitoring] auf [code]true[/code] "
-"gesetzt ist.\n"
-"[code]area_rid[/code] die [RID] des anderen Area2D's [CollisionObject2D], "
-"das vom [Physics2DServer] verwendet wird.\n"
-"[code]area[/code] die andere Area2D.\n"
-"[code]area_shape_index[/code] der Index des [Shape2D]s des anderen Area2Ds, "
-"das vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
-"Knoten mit [code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
-"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
-"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
-"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when one of another Area2D's [Shape2D]s exits one of this Area2D's "
-"[Shape2D]s. Requires [member monitoring] to be set to [code]true[/code].\n"
-"[code]area_rid[/code] the [RID] of the other Area2D's [CollisionObject2D] "
-"used by the [Physics2DServer].\n"
-"[code]area[/code] the other Area2D.\n"
-"[code]area_shape_index[/code] the index of the [Shape2D] of the other Area2D "
-"used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
-"[code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape2D] of this Area2D "
-"used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
-"[code]self.shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-"Wird ausgesendet, wenn [Shape2D]s eines anderen Area2Ds [Shape2D]s dieses "
-"Area2D verlassen. Erfordert, dass [member monitoring] auf [code]true[/code] "
-"gesetzt ist.\n"
-"[code]area_rid[/code] die [RID] des anderen Area2D's [CollisionObject2D], "
-"das vom [Physics2DServer] verwendet wird.\n"
-"[code]area[/code] die andere Area2D.\n"
-"[code]area_shape_index[/code] der Index des [Shape2D]s des anderen Area2Ds, "
-"das vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
-"Knoten mit [code]area.shape_owner_get_owner(area_shape_index)[/code].\n"
-"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
-"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
-"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when a [PhysicsBody2D] or [TileMap] enters this Area2D. Requires "
-"[member monitoring] to be set to [code]true[/code]. [TileMap]s are detected "
-"if the [TileSet] has Collision [Shape2D]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody2D] or [TileMap]."
-msgstr ""
-"Wird ausgesendet, wenn ein [PhysicsBody2D] oder eine [TileMap] diesen Area2D "
-"betritt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
-"ist. [TileMap]s werden erkannt, wenn das [TileSet] Kollisions-[Shape2D]s "
-"hat.\n"
-"[code]body[/code] der [Node], falls im Baum vorhanden, des anderen "
-"[PhysicsBody2D] oder [TileMap]."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when a [PhysicsBody2D] or [TileMap] exits this Area2D. Requires "
-"[member monitoring] to be set to [code]true[/code]. [TileMap]s are detected "
-"if the [TileSet] has Collision [Shape2D]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody2D] or [TileMap]."
-msgstr ""
-"Wird ausgesendet, wenn ein [PhysicsBody2D] oder eine [TileMap] diesen Area2D "
-"verlässt. Erfordert, dass [member monitoring] auf [code]true[/code] gesetzt "
-"ist. [TileMap]s werden erkannt, wenn das [TileSet] Kollisions-[Shape2D]s "
-"hat.\n"
-"[code]body[/code] der [Node], falls im Baum vorhanden, des anderen "
-"[PhysicsBody2D] oder [TileMap]."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when one of a [PhysicsBody2D] or [TileMap]'s [Shape2D]s enters one "
-"of this Area2D's [Shape2D]s. Requires [member monitoring] to be set to "
-"[code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision "
-"[Shape2D]s.\n"
-"[code]body_rid[/code] the [RID] of the [PhysicsBody2D] or [TileSet]'s "
-"[CollisionObject2D] used by the [Physics2DServer].\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the "
-"[PhysicsBody2D] or [TileMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape2D] of the "
-"[PhysicsBody2D] or [TileMap] used by the [Physics2DServer]. Get the "
-"[CollisionShape2D] node with [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape2D] of this Area2D "
-"used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
-"[code]self.shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-"Wird ausgesendet, wenn eine der [Shape2D]s eines [PhysicsBody2D] oder einer "
-"[TileMap] in eine der [Shape2D]s dieser Area2D eintritt. Erfordert, dass "
-"[member monitoring] auf [code]true[/code] gesetzt ist. [TileMap]s werden "
-"erkannt, wenn das [TileSet] Kollisions-[Shape2D]s hat.\n"
-"[code]body_rid[/code] die [RID] des [PhysicsBody2D] oder [TileSet]'s "
-"[CollisionObject2D], das vom [Physics2DServer] verwendet wird.\n"
-"[code]body[/code] der [Node] des [PhysicsBody2D] oder der [TileMap], wenn er "
-"im Baum existiert.\n"
-"[code]body_shape_index[/code] der Index des [Shape2D]s des [PhysicsBody2D]s "
-"oder der [TileMap], der vom [Physics2DServer] verwendet wird. Holen Sie sich "
-"den [CollisionShape2D] Knoten mit [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
-"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
-"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-
-#: doc/classes/Area2D.xml
-msgid ""
-"Emitted when one of a [PhysicsBody2D] or [TileMap]'s [Shape2D]s exits one of "
-"this Area2D's [Shape2D]s. Requires [member monitoring] to be set to "
-"[code]true[/code]. [TileMap]s are detected if the [TileSet] has Collision "
-"[Shape2D]s.\n"
-"[code]body_rid[/code] the [RID] of the [PhysicsBody2D] or [TileSet]'s "
-"[CollisionObject2D] used by the [Physics2DServer].\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the "
-"[PhysicsBody2D] or [TileMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape2D] of the "
-"[PhysicsBody2D] or [TileMap] used by the [Physics2DServer]. Get the "
-"[CollisionShape2D] node with [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape2D] of this Area2D "
-"used by the [Physics2DServer]. Get the [CollisionShape2D] node with "
-"[code]self.shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-"Wird ausgesendet, wenn eine der [Shape2D]s eines [PhysicsBody2D] oder einer "
-"[TileMap] eine der [Shape2D]s dieser Area2D verlässt. Erfordert, dass "
-"[member monitoring] auf [code]true[/code] gesetzt ist. [TileMap]s werden "
-"erkannt, wenn das [TileSet] Kollisions-[Shape2D]s hat.\n"
-"[code]body_rid[/code] die [RID] des [PhysicsBody2D] oder [TileSet]'s "
-"[CollisionObject2D], das vom [Physics2DServer] verwendet wird.\n"
-"[code]body[/code] der [Node] des [PhysicsBody2D] oder der [TileMap], wenn er "
-"im Baum existiert.\n"
-"[code]body_shape_index[/code] der Index des [Shape2D]s des [PhysicsBody2D]s "
-"oder der [TileMap], der vom [Physics2DServer] verwendet wird. Holen Sie sich "
-"den [CollisionShape2D] Knoten mit [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] der Index des [Shape2D]s dieses Area2Ds, der "
-"vom [Physics2DServer] verwendet wird. Holen Sie den [CollisionShape2D] "
-"Knoten mit [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-
-#: doc/classes/Array.xml
-msgid "A generic array datatype."
-msgstr "Ein generischer Array Datentyp."
-
-#: doc/classes/Array.xml
-msgid ""
-"A generic array that can contain several elements of any type, accessible by "
-"a numerical index starting at 0. Negative indices can be used to count from "
-"the back, like in Python (-1 is the last element, -2 is the second to last, "
-"etc.).\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"var array = [\"One\", 2, 3, \"Four\"]\n"
-"print(array[0]) # One.\n"
-"print(array[2]) # 3.\n"
-"print(array[-1]) # Four.\n"
-"array[2] = \"Three\"\n"
-"print(array[-2]) # Three.\n"
-"[/codeblock]\n"
-"Arrays can be concatenated using the [code]+[/code] operator:\n"
-"[codeblock]\n"
-"var array1 = [\"One\", 2]\n"
-"var array2 = [3, \"Four\"]\n"
-"print(array1 + array2) # [\"One\", 2, 3, \"Four\"]\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Concatenating with the [code]+=[/code] operator will create a "
-"new array, which has a cost. If you want to append another array to an "
-"existing array, [method append_array] is more efficient.\n"
-"[b]Note:[/b] Arrays are always passed by reference. To get a copy of an "
-"array that can be modified independently of the original array, use [method "
-"duplicate].\n"
-"[b]Note:[/b] When declaring an array with [code]const[/code], the array "
-"itself can still be mutated by defining the values at individual indices or "
-"pushing/removing elements. Using [code]const[/code] will only prevent "
-"assigning the constant with another value after it was initialized."
-msgstr ""
-"Ein generisches Array, das mehrere Elemente beliebiger Typen enthalten kann, "
-"die über einen numerischen Index ab 0 zugänglich sind. Negative Indizes "
-"können verwendet werden, um von hinten zu zählen, wie in Python (-1 ist das "
-"letzte Element, -2 das vorletzte usw.).\n"
-"[b]Zum Beispiel:[/b]\n"
-"[codeblock]\n"
-"var array = [\"Eins\", 2, 3, \"Vier\"]\n"
-"print(array[0]) # Eins.\n"
-"print(array[2]) # 3.\n"
-"print(array[-1]) # Vier.\n"
-"array[2] = \"Drei\"\n"
-"print(array[-2]) # Drei.\n"
-"[/codeblock]\n"
-"Arrays können mit dem Operator [code]+[/code] verbunden werden:\n"
-"[codeblock]\n"
-"var array1 = [\"Eins\", 2]\n"
-"var array2 = [3, \"Vier\"]\n"
-"print(array1 + array2) # [\"Eins\", 2, 3, \"Vier\"]\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Die Verkettung mit dem Operator [code]+=[/code] erzeugt ein "
-"neues Array, was mit Kosten verbunden ist. Wenn Sie ein weiteres Array an "
-"ein bestehendes Array anhängen wollen, ist die [method append_array] "
-"effizienter.\n"
-"[b]Hinweis:[/b] Arrays werden immer per Referenz übergeben. Um eine Kopie "
-"eines Arrays zu erhalten, die unabhängig vom ursprünglichen Array verändert "
-"werden kann, verwenden Sie [method duplicate].\n"
-"[b]Hinweis:[/b] Wenn ein Array mit [code]const[/code] deklariert wird, kann "
-"das Array selbst immer noch verändert werden, indem die Werte an einzelnen "
-"Indizes definiert oder Elemente verschoben/entfernt werden. Die Verwendung "
-"von [code]const[/code] verhindert nur, dass der Konstante ein anderer Wert "
-"zugewiesen wird, nachdem sie initialisiert wurde."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolColorArray]."
-msgstr "Konstruiert einen Transform aus einem [Transform2D]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolVector3Array]."
-msgstr "Erzeugt einen neuen [Vector2] aus einem [Vector2i]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolVector2Array]."
-msgstr "Erzeugt einen neuen [Vector2] aus einem [Vector2i]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolStringArray]."
-msgstr "Konstruiert einen Transform aus einem [Transform2D]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolRealArray]."
-msgstr "Konstruiert einen Transform aus einem [Transform2D]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolIntArray]."
-msgstr "Konstruiert einen Transform aus einem [Transform2D]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid "Constructs an array from a [PoolByteArray]."
-msgstr "Konstruiert einen Transform aus einem [Transform2D]."
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid ""
-"Appends an element at the end of the array (alias of [method push_back])."
-msgstr ""
-"Hängt ein Element am Ende des Arrays an (Alias für [method push_back])."
-
-#: doc/classes/Array.xml
-msgid ""
-"Appends another array at the end of this array.\n"
-"[codeblock]\n"
-"var array1 = [1, 2, 3]\n"
-"var array2 = [4, 5, 6]\n"
-"array1.append_array(array2)\n"
-"print(array1) # Prints [1, 2, 3, 4, 5, 6].\n"
-"[/codeblock]"
-msgstr ""
-"Hängt ein weiteres Array an das Ende dieses Array an.\n"
-"[codeblock]\n"
-"var array1 = [1, 2, 3]\n"
-"var array2 = [4, 5, 6]\n"
-"array1.append_array(array2)\n"
-"print(array1) # Prints [1, 2, 3, 4, 5, 6].\n"
-"[/codeblock]"
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns the last element of the array. Prints an error and returns "
-"[code]null[/code] if the array is empty.\n"
-"[b]Note:[/b] Calling this function is not the same as writing [code]array[-1]"
-"[/code]. If the array is empty, accessing by index will pause project "
-"execution when running from the editor."
-msgstr ""
-"Gibt das letzte Element des Arrays zurück. Gibt einen Fehler aus und liefert "
-"[code]null[/code], wenn das Array leer ist.\n"
-"[b]Hinweis:[/b] Der Aufruf dieser Funktion ist nicht dasselbe wie das "
-"Schreiben von [code]array[-1][/code]. Wenn das Array leer ist, führt der "
-"Zugriff über den Index zu einer Unterbrechung der Projektausführung, wenn es "
-"vom Editor aus ausgeführt wird."
-
-#: doc/classes/Array.xml
-msgid ""
-"Finds the index of an existing value (or the insertion index that maintains "
-"sorting order, if the value is not yet present in the array) using binary "
-"search. Optionally, a [code]before[/code] specifier can be passed. If "
-"[code]false[/code], the returned index comes after all existing entries of "
-"the value in the array.\n"
-"[b]Note:[/b] Calling [method bsearch] on an unsorted array results in "
-"unexpected behavior."
-msgstr ""
-"Findet den Index eines vorhandenen Wertes (oder den Einfügeindex, der die "
-"Sortierreihenfolge beibehält, wenn der Wert noch nicht im Array vorhanden "
-"ist) mithilfe der binären Suche. Optional kann ein [code]before[/code]-"
-"Spezifizierer übergeben werden. Falls [code]false[/code], kommt der "
-"zurückgegebene Index nach allen vorhandenen Einträgen des Wertes im Array.\n"
-"[b]Hinweis:[/b] Der Aufruf der [method bsearch] auf einem unsortierten Array "
-"führt zu unerwartetem Verhalten."
-
-#: doc/classes/Array.xml
-msgid ""
-"Finds the index of an existing value (or the insertion index that maintains "
-"sorting order, if the value is not yet present in the array) using binary "
-"search and a custom comparison method declared in the [code]obj[/code]. "
-"Optionally, a [code]before[/code] specifier can be passed. If [code]false[/"
-"code], the returned index comes after all existing entries of the value in "
-"the array. The custom method receives two arguments (an element from the "
-"array and the value searched for) and must return [code]true[/code] if the "
-"first argument is less than the second, and return [code]false[/code] "
-"otherwise.\n"
-"[codeblock]\n"
-"func cardinal_to_algebraic(a):\n"
-"    match a:\n"
-"        \"one\":\n"
-"            return 1\n"
-"        \"two\":\n"
-"            return 2\n"
-"        \"three\":\n"
-"            return 3\n"
-"        \"four\":\n"
-"            return 4\n"
-"        _:\n"
-"            return 0\n"
-"\n"
-"func compare(a, b):\n"
-"    return cardinal_to_algebraic(a) < cardinal_to_algebraic(b)\n"
-"\n"
-"func _ready():\n"
-"    var a = [\"one\", \"two\", \"three\", \"four\"]\n"
-"    # `compare` is defined in this object, so we use `self` as the `obj` "
-"parameter.\n"
-"    print(a.bsearch_custom(\"three\", self, \"compare\", true)) # Expected "
-"value is 2.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Calling [method bsearch_custom] on an unsorted array results in "
-"unexpected behavior."
-msgstr ""
-"Findet den Index eines vorhandenen Wertes (oder den Einfügeindex, der die "
-"Sortierreihenfolge beibehält, wenn der Wert noch nicht im Array vorhanden "
-"ist) mithilfe der binären Suche und eine benutzerdefinierte "
-"Vergleichsmethode, die im [code]obj[/code] deklariert ist. Optional kann ein "
-"[code]before[/code]-Spezifizierer übergeben werden. Wenn [code]false[/code], "
-"kommt der zurückgegebene Index nach allen vorhandenen Einträgen des Wertes "
-"im Array. Die benutzerdefinierte Methode erhält zwei Argumente (ein Element "
-"aus dem Array und den gesuchten Wert) und muss [code]true[/code] "
-"zurückgeben, wenn das erste Argument kleiner als das zweite ist, und "
-"ansonsten [code]false[/code].\n"
-"[codeblock]\n"
-"func cardinal_to_algebraic(a):\n"
-"    match a:\n"
-"        \"eins\":\n"
-"            return 1\n"
-"        \"zwei\":\n"
-"            return 2\n"
-"        \"drei\":\n"
-"            return 3\n"
-"        \"vier\":\n"
-"            return 4\n"
-"        _:\n"
-"            return 0\n"
-"\n"
-"func compare(a, b):\n"
-"    return cardinal_to_algebraic(a) < cardinal_to_algebraic(b)\n"
-"\n"
-"func _ready():\n"
-"    var a = [\"one\", \"two\", \"three\", \"four\"]\n"
-"    # `compare`ist in diesem Objekt definiert, also benutzen wir `self` als "
-"den `obj` Parameter.\n"
-"    print(a.bsearch_custom(\"three\", self, \"compare\", true)) # Expected "
-"value is 2.\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Der Aufruf der [method bsearch_custom] auf einem "
-"unsortierten Array führt zu unerwartetem Verhalten."
-
-#: doc/classes/Array.xml
-msgid ""
-"Clears the array. This is equivalent to using [method resize] with a size of "
-"[code]0[/code]."
-msgstr ""
-"Löscht das Array. Dies entspricht der Verwendung von [method resize] mit "
-"einer Größe von [code]0[/code]."
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid "Returns the number of times an element is in the array."
-msgstr "Gibt die Anzahl der Vorkommen eines Elements im Array zurück."
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns a copy of the array.\n"
-"If [code]deep[/code] is [code]true[/code], a deep copy is performed: all "
-"nested arrays and dictionaries are duplicated and will not be shared with "
-"the original array. If [code]false[/code], a shallow copy is made and "
-"references to the original nested arrays and dictionaries are kept, so that "
-"modifying a sub-array or dictionary in the copy will also impact those "
-"referenced in the source array."
-msgstr ""
-"Gibt eine Kopie des Arrays zurück.\n"
-"Wenn [code]deep[/code] [code]true[/code] ist, wird eine tiefe Kopie "
-"erstellt: alle verschachtelten Arrays und Dictionaries werden dupliziert und "
-"nicht mit dem ursprünglichen Array geteilt. Wenn es [code]false[/code] ist, "
-"wird eine flache Kopie erstellt und Verweise auf die ursprünglichen "
-"verschachtelten Arrays und Dictionaries werden beibehalten, so dass die "
-"Änderung eines Sub-Arrays oder Dictionaries in der Kopie auch Auswirkungen "
-"auf die im Quell-Array referenzierten hat."
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid "Returns [code]true[/code] if the array is empty."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/Array.xml
-msgid ""
-"Removes the first occurrence of a value from the array. If the value does "
-"not exist in the array, nothing happens. To remove an element by index, use "
-"[method remove] instead.\n"
-"[b]Note:[/b] This method acts in-place and doesn't return a value.\n"
-"[b]Note:[/b] On large arrays, this method will be slower if the removed "
-"element is close to the beginning of the array (index 0). This is because "
-"all elements placed after the removed element have to be reindexed."
-msgstr ""
-"Entfernt das erste Vorkommen eines Wertes aus dem Array. Wenn der Wert nicht "
-"im Array vorhanden ist, passiert nichts. Um ein Element nach Index zu "
-"entfernen, verwenden Sie stattdessen [method remove].\n"
-"[b]Hinweis:[/b] Diese Methode arbeitet in-place und gibt keinen Wert "
-"zurück.\n"
-"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode langsamer, wenn das "
-"entfernte Element nahe am Anfang des Arrays liegt (Index 0). Das liegt "
-"daran, dass alle Elemente, die nach dem entfernten Element platziert sind, "
-"neu indiziert werden müssen."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid ""
-"Assigns the given value to all elements in the array. This can typically be "
-"used together with [method resize] to create an array with a given size and "
-"initialized elements:\n"
-"[codeblock]\n"
-"var array = []\n"
-"array.resize(10)\n"
-"array.fill(0) # Initialize the 10 elements to 0.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] If [code]value[/code] is of a reference type ([Object]-derived, "
-"[Array], [Dictionary], etc.) then the array is filled with the references to "
-"the same object, i.e. no duplicates are created."
-msgstr ""
-"Weist allen Elementen des Arrays den angegebenen Wert zu. Dies kann "
-"normalerweise zusammen mit [method resize] verwendet werden, um ein Array "
-"mit einer bestimmten Größe und initialisierten Elementen zu erstellen:\n"
-"[codeblock]\n"
-"var array = []\n"
-"array.resize(10)\n"
-"array.fill(0) # Initialisieren Sie die 10 Elemente auf 0.\n"
-"[/codeblock]"
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid ""
-"Searches the array for a value and returns its index or [code]-1[/code] if "
-"not found. Optionally, the initial search index can be passed. Returns "
-"[code]-1[/code] if [code]from[/code] is out of bounds."
-msgstr ""
-"Durchsucht das Array nach einem Wert und gibt dessen Index oder [code]-1[/"
-"code] zurück, wenn er nicht gefunden wurde. Optional kann auch der "
-"anfängliche Suchindex übergeben werden. Gibt [code]-1[/code] zurück, wenn "
-"[code]from[/code] außerhalb der Grenzen liegt."
-
-#: doc/classes/Array.xml
-msgid ""
-"Searches the array in reverse order for a value and returns its index or "
-"[code]-1[/code] if not found."
-msgstr ""
-"Durchsucht das Array in umgekehrter Reihenfolge nach einem Wert und gibt "
-"dessen Index oder [code]-1[/code] zurück, wenn er nicht gefunden wird."
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns the first element of the array. Prints an error and returns "
-"[code]null[/code] if the array is empty.\n"
-"[b]Note:[/b] Calling this function is not the same as writing [code]array[0]"
-"[/code]. If the array is empty, accessing by index will pause project "
-"execution when running from the editor."
-msgstr ""
-"Gibt das erste Element des Arrays zurück. Gibt einen Fehler aus und liefert "
-"[code]null[/code], wenn das Array leer ist.\n"
-"[b]Hinweis:[/b] Der Aufruf dieser Funktion ist nicht dasselbe wie das "
-"Schreiben von [code]array[0][/code]. Wenn das Array leer ist, führt der "
-"Zugriff über den Index zu einer Unterbrechung der Projektausführung, wenn es "
-"vom Editor aus ausgeführt wird."
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns [code]true[/code] if the array contains the given value.\n"
-"[codeblock]\n"
-"[\"inside\", 7].has(\"inside\") # True\n"
-"[\"inside\", 7].has(\"outside\") # False\n"
-"[\"inside\", 7].has(7) # True\n"
-"[\"inside\", 7].has(\"7\") # False\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This is equivalent to using the [code]in[/code] operator as "
-"follows:\n"
-"[codeblock]\n"
-"# Will evaluate to `true`.\n"
-"if 2 in [2, 4, 6, 8]:\n"
-"    pass\n"
-"[/codeblock]"
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array den angegebenen Wert enthält.\n"
-"[codeblock]\n"
-"[\"innerhalb\", 7].has(\"innerhalb\") # True\n"
-"[\"innerhalb\", 7].has(\"außerhalb\") # False\n"
-"[\"innerhalb\", 7].has(7) # True\n"
-"[\"innerhalb\", 7].has(\"7\") # False\n"
-"[/codeblock]\n"
-"[b]Hinweis:[/b] Dies entspricht der Verwendung des Operators [code]in[/code] "
-"wie folgt:\n"
-"[codeblock]\n"
-"# Wird als `true` ausgewertet.\n"
-"if 2 in [2, 4, 6, 8]:\n"
-"    pass\n"
-"[/codeblock]"
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns a hashed 32-bit integer value representing the array and its "
-"contents.\n"
-"[b]Note:[/b] [Array]s with equal content will always produce identical hash "
-"values. However, the reverse is not true. Returning identical hash values "
-"does [i]not[/i] imply the arrays are equal, because different arrays can "
-"have identical hash values due to hash collisions."
-msgstr ""
-"Gibt einen gehashten 32-Bit-Ganzzahlwert zurück, der das Array und seinen "
-"Inhalt darstellt.\n"
-"[b]Hinweis:[/b] [Array]s mit gleichem Inhalt erzeugen immer identische "
-"Hashwerte. Das Gegenteil ist jedoch nicht der Fall. Die Rückgabe von "
-"identischen Hash-Werten bedeutet [i]nicht[/i], dass die Arrays gleich sind, "
-"da verschiedene Arrays aufgrund von Hash-Kollisionen identische Hash-Werte "
-"haben können."
-
-#: doc/classes/Array.xml
-msgid ""
-"Inserts a new element at a given position in the array. The position must be "
-"valid, or at the end of the array ([code]pos == size()[/code]).\n"
-"[b]Note:[/b] This method acts in-place and doesn't return a value.\n"
-"[b]Note:[/b] On large arrays, this method will be slower if the inserted "
-"element is close to the beginning of the array (index 0). This is because "
-"all elements placed after the newly inserted element have to be reindexed."
-msgstr ""
-"Fügt ein neues Element an einer bestimmten Position in das Array ein. Die "
-"Position muss gültig sein oder am Ende des Arrays liegen ([code]pos == size()"
-"[/code]).\n"
-"[b]Hinweis:[/b] Diese Methode arbeitet in-place und gibt keinen Wert "
-"zurück.\n"
-"[b]Hinweis:[/b] Bei großen Arrays wird diese Methode langsamer sein, wenn "
-"das eingefügte Element nahe am Anfang des Arrays (Index 0) liegt. Dies liegt "
-"daran, dass alle Elemente, die nach dem neu eingefügten Element platziert "
-"sind, neu indiziert werden müssen."
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid "Reverses the order of the elements in the array."
-msgstr "Kehrt die Reihenfolge der Elemente des Arrays um."
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns the maximum value contained in the array if all elements are of "
-"comparable types. If the elements can't be compared, [code]null[/code] is "
-"returned."
-msgstr ""
-"Gibt den größten im Array enthaltenen Wert zurück, wenn alle Elemente von "
-"vergleichbarem Typ sind. Wenn die Elemente nicht verglichen werden können, "
-"wird [code]null[/code] zurückgegeben."
-
-#: doc/classes/Array.xml
-msgid ""
-"Returns the minimum value contained in the array if all elements are of "
-"comparable types. If the elements can't be compared, [code]null[/code] is "
-"returned."
-msgstr ""
-"Gibt den kleinsten im Array enthaltenen Wert zurück, wenn alle Elemente von "
-"vergleichbarem Typ sind. Wenn die Elemente nicht verglichen werden können, "
-"wird [code]null[/code] zurückgegeben."
-
-#: doc/classes/Array.xml
-msgid ""
-"Removes and returns the element of the array at index [code]position[/code]. "
-"If negative, [code]position[/code] is considered relative to the end of the "
-"array. Leaves the array untouched and returns [code]null[/code] if the array "
-"is empty or if it's accessed out of bounds. An error message is printed when "
-"the array is accessed out of bounds, but not when the array is empty.\n"
-"[b]Note:[/b] On large arrays, this method can be slower than [method "
-"pop_back] as it will reindex the array's elements that are located after the "
-"removed element. The larger the array and the lower the index of the removed "
-"element, the slower [method pop_at] will be."
-msgstr ""
-"Entfernt das Element des Arrays am Index [code]position[/code] und gibt es "
-"zurück. Falls negativ, wird [code]position[/code] relativ zum Ende des "
-"Arrays betrachtet. Lässt das Array unangetastet und gibt [code]null[/code] "
-"zurück, wenn das Array leer ist oder wenn der Zugriff außerhalb der Grenzen "
-"erfolgt. Es wird eine Fehlermeldung ausgegeben, wenn der Zugriff auf das "
-"Array außerhalb der Grenzen erfolgt, aber nicht, wenn das Array leer ist.\n"
-"[b]Hinweis:[/b] Bei großen Arrays kann diese Methode langsamer sein als "
-"[method pop_back], da sie die Elemente des Arrays, die sich nach dem "
-"entfernten Element befinden, neu indiziert werden müssen. Je größer das "
-"Array und je niedriger der Index des entfernten Elements ist, desto "
-"langsamer wird die [method pop_at] sein."
-
-#: doc/classes/Array.xml
-msgid ""
-"Removes and returns the last element of the array. Returns [code]null[/code] "
-"if the array is empty, without printing an error message. See also [method "
-"pop_front]."
-msgstr ""
-"Entfernt und gibt das letzte Element des Arrays zurück. Gibt [code]null[/"
-"code] zurück, wenn das Array leer ist, ohne eine Fehlermeldung auszugeben. "
-"Siehe auch [Methode pop_front]."
-
-#: doc/classes/Array.xml
-msgid ""
-"Removes and returns the first element of the array. Returns [code]null[/"
-"code] if the array is empty, without printing an error message. See also "
-"[method pop_back].\n"
-"[b]Note:[/b] On large arrays, this method is much slower than [method "
-"pop_back] as it will reindex all the array's elements every time it's "
-"called. The larger the array, the slower [method pop_front] will be."
-msgstr ""
-"Entfernt und gibt das erste Element des Arrays zurück. Gibt [code]null[/"
-"code] zurück, wenn das Array leer ist, ohne eine Fehlermeldung auszugeben. "
-"Siehe auch [Methode pop_back].\n"
-"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode viel langsamer als "
-"[method pop_back], da sie bei jedem Aufruf alle Elemente des Arrays neu "
-"indiziert. Je größer das Array, desto langsamer ist [method pop_front]."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid ""
-"Appends an element at the end of the array. See also [method push_front]."
-msgstr ""
-"Hängt ein Element am Ende des Arrays an (Alias für [method push_back])."
-
-#: doc/classes/Array.xml
-msgid ""
-"Adds an element at the beginning of the array. See also [method push_back].\n"
-"[b]Note:[/b] On large arrays, this method is much slower than [method "
-"push_back] as it will reindex all the array's elements every time it's "
-"called. The larger the array, the slower [method push_front] will be."
-msgstr ""
-"Fügt ein Element am Anfang des Arrays hinzu. Siehe auch [Methode "
-"push_back].\n"
-"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode viel langsamer als "
-"[method push_back], da sie bei jedem Aufruf alle Elemente des Arrays neu "
-"indiziert. Je größer das Array, desto langsamer ist [method push_front]."
-
-#: doc/classes/Array.xml
-msgid ""
-"Removes an element from the array by index. If the index does not exist in "
-"the array, nothing happens. To remove an element by searching for its value, "
-"use [method erase] instead.\n"
-"[b]Note:[/b] This method acts in-place and doesn't return a value.\n"
-"[b]Note:[/b] On large arrays, this method will be slower if the removed "
-"element is close to the beginning of the array (index 0). This is because "
-"all elements placed after the removed element have to be reindexed."
-msgstr ""
-"Entfernt ein Element aus dem Array nach Index. Wenn der Index im Array nicht "
-"vorhanden ist, passiert nichts. Um ein Element durch die Suche nach seinem "
-"Wert zu entfernen, verwenden Sie stattdessen [method erase].\n"
-"[b]Hinweis:[/b] Diese Methode arbeitet in-place und gibt keinen Wert "
-"zurück.\n"
-"[b]Hinweis:[/b] Bei großen Arrays ist diese Methode langsamer, wenn das "
-"entfernte Element nahe am Anfang des Arrays liegt (Index 0). Dies liegt "
-"daran, dass alle Elemente, die nach dem entfernten Element platziert sind, "
-"neu indiziert werden müssen."
-
-#: doc/classes/Array.xml
-msgid ""
-"Resizes the array to contain a different number of elements. If the array "
-"size is smaller, elements are cleared, if bigger, new elements are "
-"[code]null[/code]."
-msgstr ""
-"Ändert die Größe des Arrays, damit es eine andere Anzahl von Elementen "
-"enthält. Ist die Größe des Arrays kleiner, werden die Elemente gelöscht, ist "
-"sie größer, sind die neuen Elemente [code]null[/code]."
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid ""
-"Searches the array in reverse order. Optionally, a start search index can be "
-"passed. If negative, the start index is considered relative to the end of "
-"the array. If the adjusted start index is out of bounds, this method "
-"searches from the end of the array."
-msgstr ""
-"Durchsucht das Array in umgekehrter Reihenfolge. Optional kann ein Start-"
-"Suchindex übergeben werden. Ist dieser negativ, wird der Startindex relativ "
-"zum Ende des Arrays betrachtet. Liegt der eingestellte Startindex außerhalb "
-"der Grenzen, sucht diese Methode ab dem Ende des Arrays."
-
-#: doc/classes/Array.xml
-msgid ""
-"Shuffles the array such that the items will have a random order. This method "
-"uses the global random number generator common to methods such as [method "
-"@GDScript.randi]. Call [method @GDScript.randomize] to ensure that a new "
-"seed will be used each time if you want non-reproducible shuffling."
-msgstr ""
-"Mischt das Array so, dass die Elemente eine zufällige Reihenfolge haben. "
-"Diese Methode verwendet den globalen Zufallszahlengenerator, der auch für "
-"Methoden wie [method @GDScript.randi] verwendet wird. Rufen Sie [method "
-"@GDScript.randomize] auf, um sicherzustellen, dass jedes Mal ein neuer Seed "
-"verwendet wird, wenn Sie ein nicht reproduzierbares Mischen wünschen."
-
-#: doc/classes/Array.xml doc/classes/PoolByteArray.xml
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid "Returns the number of elements in the array."
-msgstr "Gibt die Nummer von Elementen innerhalb eines Arrays wieder."
-
-#: doc/classes/Array.xml
-msgid ""
-"Duplicates the subset described in the function and returns it in an array, "
-"deeply copying the array if [code]deep[/code] is [code]true[/code]. Lower "
-"and upper index are inclusive, with the [code]step[/code] describing the "
-"change between indices while slicing."
-msgstr ""
-"Dupliziert die in der Funktion beschriebene Teilmenge und gibt sie in einem "
-"Array zurück, wobei das Array tief kopiert wird, wenn [code]deep[/code] "
-"[code]true[/code] ist. Unterer und oberer Index sind inklusive, wobei "
-"[code]step[/code] den Wechsel zwischen den Indizes während des Slicings "
-"beschreibt."
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid ""
-"Sorts the array.\n"
-"[b]Note:[/b] The sorting algorithm used is not [url=https://en.wikipedia.org/"
-"wiki/Sorting_algorithm#Stability]stable[/url]. This means that values "
-"considered equal may have their order changed when using [method sort].\n"
-"[b]Note:[/b] Strings are sorted in alphabetical order (as opposed to natural "
-"order). This may lead to unexpected behavior when sorting an array of "
-"strings ending with a sequence of numbers. Consider the following example:\n"
-"[codeblock]\n"
-"var strings = [\"string1\", \"string2\", \"string10\", \"string11\"]\n"
-"strings.sort()\n"
-"print(strings) # Prints [string1, string10, string11, string2]\n"
-"[/codeblock]"
-msgstr ""
-"Sortiert das Array.\n"
-"[b]Hinweis:[/b] Strings werden in alphabetischer Reihenfolge sortiert (im "
-"Gegensatz zur natürlichen Reihenfolge). Dies kann zu unerwartetem Verhalten "
-"führen, wenn ein Array mit Strings sortiert wird, die mit einer Zahlenfolge "
-"enden. Betrachten Sie das folgende Beispiel:\n"
-"[codeblock]\n"
-"var strings = [\"string1\", \"string2\", \"string10\", \"string11\"]\n"
-"strings.sort()\n"
-"print(strings) # Prints [string1, string10, string11, string2]\n"
-"[/codeblock]"
-
-#: doc/classes/Array.xml
-#, fuzzy
-msgid ""
-"Sorts the array using a custom method. The arguments are an object that "
-"holds the method and the name of such method. The custom method receives two "
-"arguments (a pair of elements from the array) and must return either "
-"[code]true[/code] or [code]false[/code].\n"
-"For two elements [code]a[/code] and [code]b[/code], if the given method "
-"returns [code]true[/code], element [code]b[/code] will be after element "
-"[code]a[/code] in the array.\n"
-"[b]Note:[/b] The sorting algorithm used is not [url=https://en.wikipedia.org/"
-"wiki/Sorting_algorithm#Stability]stable[/url]. This means that values "
-"considered equal may have their order changed when using [method "
-"sort_custom].\n"
-"[b]Note:[/b] You cannot randomize the return value as the heapsort algorithm "
-"expects a deterministic result. Randomizing the return value will result in "
-"unexpected behavior.\n"
-"[codeblock]\n"
-"class MyCustomSorter:\n"
-"    static func sort_ascending(a, b):\n"
-"        if a[0] < b[0]:\n"
-"            return true\n"
-"        return false\n"
-"\n"
-"var my_items = [[5, \"Potato\"], [9, \"Rice\"], [4, \"Tomato\"]]\n"
-"my_items.sort_custom(MyCustomSorter, \"sort_ascending\")\n"
-"print(my_items) # Prints [[4, Tomato], [5, Potato], [9, Rice]].\n"
-"[/codeblock]"
-msgstr ""
-"Sortiert das Array mit einer eigenen Methode. Die Argumente sind ein Objekt, "
-"das die Methode enthält, und der Name dieser Methode. Die benutzerdefinierte "
-"Methode erhält zwei Argumente (ein Paar von Elementen aus dem Array) und "
-"muss entweder [code]true[/code] oder [code]false[/code] zurückgeben.\n"
-"Für zwei Elemente [code]a[/code] und [code]b[/code], wenn die angegebene "
-"Methode [code]true[/code] zurückgibt, wird Element [code]b[/code] nach "
-"Element [code]a[/code] im Array stehen.\n"
-"[b]Hinweis:[/b] Sie können den Rückgabewert nicht zufällig bestimmen, da der "
-"Heapsort-Algorithmus ein deterministisches Ergebnis erwartet. Dies würde zu "
-"einem unerwarteten Verhalten führen.\n"
-"[codeblock]\n"
-"class MyCustomSorter:\n"
-"    static func sort_ascending(a, b):\n"
-"        if a[0] < b[0]:\n"
-"            return true\n"
-"        return false\n"
-"\n"
-"var my_items = [[5, \"Kartoffel\"], [9, \"Reis\"], [4, \"Tomate\"]]\n"
-"my_items.sort_custom(MyCustomSorter, \"sort_ascending\")\n"
-"print(my_items) # Prints [[4, Tomate], [5, Kartoffel], [9, Reis]].\n"
-"[/codeblock]"
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"[Mesh] type that provides utility for constructing a surface from arrays."
-msgstr ""
-"[Mesh]-Typ, der das Konstruieren einer Oberfläche aus Arrays ermöglicht."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"The [ArrayMesh] is used to construct a [Mesh] by specifying the attributes "
-"as arrays.\n"
-"The most basic example is the creation of a single triangle:\n"
-"[codeblock]\n"
-"var vertices = PoolVector3Array()\n"
-"vertices.push_back(Vector3(0, 1, 0))\n"
-"vertices.push_back(Vector3(1, 0, 0))\n"
-"vertices.push_back(Vector3(0, 0, 1))\n"
-"# Initialize the ArrayMesh.\n"
-"var arr_mesh = ArrayMesh.new()\n"
-"var arrays = []\n"
-"arrays.resize(ArrayMesh.ARRAY_MAX)\n"
-"arrays[ArrayMesh.ARRAY_VERTEX] = vertices\n"
-"# Create the Mesh.\n"
-"arr_mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, arrays)\n"
-"var m = MeshInstance.new()\n"
-"m.mesh = arr_mesh\n"
-"[/codeblock]\n"
-"The [MeshInstance] is ready to be added to the [SceneTree] to be shown.\n"
-"See also [ImmediateGeometry], [MeshDataTool] and [SurfaceTool] for "
-"procedural geometry generation.\n"
-"[b]Note:[/b] Godot uses clockwise [url=https://learnopengl.com/Advanced-"
-"OpenGL/Face-culling]winding order[/url] for front faces of triangle "
-"primitive modes."
-msgstr ""
-"Das [ArrayMesh] wird verwendet, um ein [Mesh] zu konstruieren, indem die "
-"Attribute als Arrays angegeben werden.\n"
-"Das einfachste Beispiel ist die Erstellung eines einzelnen Dreiecks:\n"
-"[codeblock]\n"
-"var vertices = PoolVector3Array()\n"
-"vertices.push_back(Vector3(0, 1, 0))\n"
-"vertices.push_back(Vector3(1, 0, 0))\n"
-"vertices.push_back(Vector3(0, 0, 1))\n"
-"# Initialisiere das ArrayMesh.\n"
-"var arr_mesh = ArrayMesh.new()\n"
-"var arrays = []\n"
-"arrays.resize(ArrayMesh.ARRAY_MAX)\n"
-"arrays[ArrayMesh.ARRAY_VERTEX] = vertices\n"
-"# Erstelle das Mesh.\n"
-"arr_mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, arrays)\n"
-"var m = MeshInstance.new()\n"
-"m.mesh = arr_mesh\n"
-"[/codeblock]\n"
-"Die [MeshInstance] ist bereit, dem darzustellenden [SceneTree] hinzugefügt "
-"zu werden.\n"
-"Siehe auch [ImmediateGeometry], [MeshDataTool] und [SurfaceTool] für "
-"prozedurale Geometrieerzeugung.\n"
-"[b]Hinweis:[/b] Godot verwendet die [url=https://learnopengl.com/Advanced-"
-"OpenGL/Face-culling]Wickelreihenfolge[/url] im Uhrzeigersinn für "
-"Vorderseiten von Dreiecks-Primitivmodi."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Adds name for a blend shape that will be added with [method "
-"add_surface_from_arrays]. Must be called before surface is added."
-msgstr ""
-"Fügt einen Namen für eine Mischform hinzu, die mit der [method "
-"add_surface_from_arrays] hinzugefügt wird. Muss aufgerufen werden, bevor die "
-"Oberfläche hinzugefügt wird."
-
-#: doc/classes/ArrayMesh.xml
-#, fuzzy
-msgid ""
-"Creates a new surface.\n"
-"Surfaces are created to be rendered using a [code]primitive[/code], which "
-"may be any of the types defined in [enum Mesh.PrimitiveType]. (As a note, "
-"when using indices, it is recommended to only use points, lines, or "
-"triangles.) [method Mesh.get_surface_count] will become the [code]surf_idx[/"
-"code] for this new surface.\n"
-"The [code]arrays[/code] argument is an array of arrays. See [enum ArrayType] "
-"for the values used in this array. For example, [code]arrays[0][/code] is "
-"the array of vertices. That first vertex sub-array is always required; the "
-"others are optional. Adding an index array puts this function into \"index "
-"mode\" where the vertex and other arrays become the sources of data and the "
-"index array defines the vertex order. All sub-arrays must have the same "
-"length as the vertex array or be empty, except for [constant ARRAY_INDEX] if "
-"it is used.\n"
-"[code]compress_flags[/code] is a bitfield made of [enum Mesh.ArrayFormat] "
-"values. It defaults to [constant Mesh.ARRAY_COMPRESS_DEFAULT].\n"
-"[b]Note:[/b] The default [code]compress_flags[/code] enable [constant Mesh."
-"ARRAY_COMPRESS_COLOR], which makes vertex colors stored as 8-bit unsigned "
-"integers. This will clamp overbright vertex colors to [code]Color(1, 1, 1, 1)"
-"[/code] and reduce their precision. To store HDR vertex colors, remove the "
-"vertex color compression flag by passing [code]Mesh.ARRAY_COMPRESS_DEFAULT ^ "
-"Mesh.ARRAY_COMPRESS_COLOR[/code] as the value of [code]compress_flags[/code]."
-msgstr ""
-"Erzeugt eine neue Oberfläche.\n"
-"Flächen werden erstellt, um mit einem [code]primitive[/code] gerendert zu "
-"werden, das einer der in [enum Mesh.PrimitiveType] definierten Typen sein "
-"kann. (Es wird empfohlen, bei der Verwendung von Indizes nur Punkte, Linien "
-"oder Dreiecke zu verwenden). Die [method Mesh.get_surface_count] wird zur "
-"[code]surf_idx[/code] für diese neue Oberfläche.\n"
-"Das Argument [code]arrays[/code] ist ein Array von Arrays. Siehe [enum "
-"ArrayType] für die in diesem Array verwendeten Werte. Zum Beispiel ist "
-"[code]arrays[0][/code] das Array der Vertices. Das erste Vertex-Sub-Array "
-"ist immer erforderlich; die anderen sind optional. Das Hinzufügen eines "
-"Index-Arrays versetzt diese Funktion in den \"Index-Modus\", in dem die "
-"Vertex- und anderen Arrays zu Datenquellen werden und das Index-Array die "
-"Reihenfolge der Vertexe definiert. Alle Sub-Arrays müssen die gleiche Länge "
-"wie das Vertex-Array haben oder leer sein, mit Ausnahme der [constant "
-"ARRAY_INDEX], falls sie verwendet wird."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Removes all blend shapes from this [ArrayMesh]."
-msgstr "Entfernt alle Mischformen aus diesem [ArrayMesh]."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Removes all surfaces from this [ArrayMesh]."
-msgstr "Entfernt alle Flächen aus diesem [ArrayMesh]."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Returns the number of blend shapes that the [ArrayMesh] holds."
-msgstr "Gibt die Anzahl der Blendformen zurück, die das [ArrayMesh] enthält."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Returns the name of the blend shape at this index."
-msgstr "Gibt den Namen der Blendform an diesem Index zurück."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Will perform a UV unwrap on the [ArrayMesh] to prepare the mesh for "
-"lightmapping."
-msgstr ""
-"Führt ein UV Unwrap auf dem [ArrayMesh] durch, um das Mesh für das "
-"Lightmapping vorzubereiten."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Will regenerate normal maps for the [ArrayMesh]."
-msgstr "Regeneriert Normal Maps für das [ArrayMesh]."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Returns the index of the first surface with this name held within this "
-"[ArrayMesh]. If none are found, -1 is returned."
-msgstr ""
-"Gibt den Index der ersten Fläche mit diesem Namen in diesem [ArrayMesh] "
-"zurück. Wenn keine gefunden wird, wird -1 zurückgegeben."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Returns the length in indices of the index array in the requested surface "
-"(see [method add_surface_from_arrays])."
-msgstr ""
-"Gibt die Länge des Index-Arrays in der angeforderten Oberfläche in Indizes "
-"zurück (siehe [method add_surface_from_arrays])."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Returns the length in vertices of the vertex array in the requested surface "
-"(see [method add_surface_from_arrays])."
-msgstr ""
-"Gibt die Länge des Vertex-Arrays in der angeforderten Oberfläche in Vertices "
-"zurück (siehe [method add_surface_from_arrays])."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Returns the format mask of the requested surface (see [method "
-"add_surface_from_arrays])."
-msgstr ""
-"Gibt die Formatmaske der angeforderten Oberfläche zurück (siehe [method "
-"add_surface_from_arrays])."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Gets the name assigned to this surface."
-msgstr "Ruft den dieser Fläche zugewiesenen Namen ab."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Returns the primitive type of the requested surface (see [method "
-"add_surface_from_arrays])."
-msgstr ""
-"Gibt den primitiven Typ der angeforderten Fläche zurück (siehe [method "
-"add_surface_from_arrays])."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Removes a surface at position [code]surf_idx[/code], shifting greater "
-"surfaces one [code]surf_idx[/code] slot down."
-msgstr ""
-"Entfernt eine Fläche an der Position [code]surf_idx[/code] und verschiebt "
-"größere Flächen um einen [code]surf_idx[/code] Slot nach unten."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Sets a name for a given surface."
-msgstr "Legt einen Namen für eine bestimmte Oberfläche fest."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"Updates a specified region of mesh arrays on the GPU.\n"
-"[b]Warning:[/b] Only use if you know what you are doing. You can easily "
-"cause crashes by calling this function with improper arguments."
-msgstr ""
-"Aktualisiert einen bestimmten Bereich von Mesh-Arrays auf der GPU.\n"
-"[b]Warnung:[/b] Nur verwenden, wenn Sie wissen, was Sie tun. Sie können "
-"leicht Abstürze verursachen, wenn Sie diese Funktion mit falschen Argumenten "
-"aufrufen."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Sets the blend shape mode to one of [enum Mesh.BlendShapeMode]."
-msgstr "Setzt den Blendform-Modus auf einen der [enum Mesh.BlendShapeMode]."
-
-#: doc/classes/ArrayMesh.xml doc/classes/PrimitiveMesh.xml
-msgid ""
-"Overrides the [AABB] with one defined by user for use with frustum culling. "
-"Especially useful to avoid unexpected culling when using a shader to offset "
-"vertices."
-msgstr ""
-"Überschreibt den [AABB] mit einem vom Benutzer definierten Wert für die "
-"Verwendung mit Frustum Culling. Besonders nützlich, um unerwartetes Culling "
-"zu vermeiden, wenn ein Shader zum Versetzen von Vertices verwendet wird."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Value used internally when no indices are present."
-msgstr "Wert wird intern benutzt, wenn keine Indizes vorhanden sind."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Amount of weights/bone indices per vertex (always 4)."
-msgstr "Anzahl der Gewichte/Knochenindizes pro Vertex (immer 4)."
-
-#: doc/classes/ArrayMesh.xml
-msgid "[PoolVector3Array], [PoolVector2Array], or [Array] of vertex positions."
-msgstr ""
-"[PoolVector3Array], [PoolVector2Array] oder [Array] von Vertex-Positionen."
-
-#: doc/classes/ArrayMesh.xml
-msgid "[PoolVector3Array] of vertex normals."
-msgstr "[PoolVector3Array] von Vertex-Normalen."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"[PoolRealArray] of vertex tangents. Each element in groups of 4 floats, "
-"first 3 floats determine the tangent, and the last the binormal direction as "
-"-1 or 1."
-msgstr ""
-"[PoolRealArray] von Vertex-Tangenten. Jedes Element in Gruppen von 4 Floats, "
-"die ersten 3 Floats bestimmen die Tangente, und das letzte die binormale "
-"Richtung als -1 oder 1."
-
-#: doc/classes/ArrayMesh.xml
-msgid "[PoolColorArray] of vertex colors."
-msgstr "[PoolColorArray] von Vertex-Farben."
-
-#: doc/classes/ArrayMesh.xml
-msgid "[PoolVector2Array] for UV coordinates."
-msgstr "[PoolVector2Array] für UV-Koordinaten."
-
-#: doc/classes/ArrayMesh.xml
-msgid "[PoolVector2Array] for second UV coordinates."
-msgstr "[PoolVector2Array] für zweite UV-Koordinaten."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"[PoolRealArray] or [PoolIntArray] of bone indices. Each element in groups of "
-"4 floats."
-msgstr ""
-"[PoolRealArray] oder [PoolIntArray] von Knochenindizes. Jedes Element in "
-"Gruppen von 4 Floats."
-
-#: doc/classes/ArrayMesh.xml
-msgid "[PoolRealArray] of bone weights. Each element in groups of 4 floats."
-msgstr ""
-"[PoolRealArray] von Knochengewichten. Jedes Element in Gruppen von 4 Floats."
-
-#: doc/classes/ArrayMesh.xml
-msgid ""
-"[PoolIntArray] of integers used as indices referencing vertices, colors, "
-"normals, tangents, and textures. All of those arrays must have the same "
-"number of elements as the vertex array. No index can be beyond the vertex "
-"array size. When this index array is present, it puts the function into "
-"\"index mode,\" where the index selects the *i*'th vertex, normal, tangent, "
-"color, UV, etc. This means if you want to have different normals or colors "
-"along an edge, you have to duplicate the vertices.\n"
-"For triangles, the index array is interpreted as triples, referring to the "
-"vertices of each triangle. For lines, the index array is in pairs indicating "
-"the start and end of each line."
-msgstr ""
-"[PoolIntArray] von Ganzzahlen, die als Indizes verwendet werden und auf "
-"Vertices, Farben, Normalen, Tangenten und Texturen verweisen. Alle diese "
-"Arrays müssen die gleiche Anzahl von Elementen haben wie das Vertex-Array. "
-"Kein Index kann über die Größe des Vertex-Arrays hinausgehen. Wenn dieses "
-"Index-Array vorhanden ist, versetzt es die Funktion in den \"Index-Modus\", "
-"in dem der Index den *i*-ten Vertex, die Normale, die Tangente, die Farbe, "
-"die UV, usw. auswählt. Das bedeutet, wenn man verschiedene Normalen oder "
-"Farben entlang einer Kante haben will, muss man die Vertices duplizieren.\n"
-"Bei Dreiecken wird das Index-Array als Tripel interpretiert, das sich auf "
-"die Vertices der einzelnen Dreiecke bezieht. Bei Linien besteht das Index-"
-"Array aus Paaren, die den Anfang und das Ende jeder Linie angeben."
-
-#: doc/classes/ArrayMesh.xml doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum ArrayType] enum."
-msgstr "Stellt die Größe der Aufzählung [enum ArrayType] dar."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include vertices (mandatory)."
-msgstr "Das Array-Format enthält Vertices (obligatorisch)."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include normals."
-msgstr "Das Array-Format enthält Normalen."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include tangents."
-msgstr "Das Array-Format enthält Tangenten."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include a color array."
-msgstr "Das Array-Format enthält ein Farbarray."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include UVs."
-msgstr "Das Array-Format enthält UVs."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include another set of UVs."
-msgstr "Das Array-Format enthält einen weiteren Satz von UVs."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include bone indices."
-msgstr "Das Array-Format enthält Knochenindizes."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Array format will include bone weights."
-msgstr "Das Array-Format enthält Knochengewichte."
-
-#: doc/classes/ArrayMesh.xml
-msgid "Index array will be used."
-msgstr "Das Index-Array wird verwendet."
-
-#: doc/classes/ARVRAnchor.xml
-msgid "An anchor point in AR space."
-msgstr "Ein Ankerpunkt im AR-Raum."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"The [ARVRAnchor] point is a spatial node that maps a real world location "
-"identified by the AR platform to a position within the game world. For "
-"example, as long as plane detection in ARKit is on, ARKit will identify and "
-"update the position of planes (tables, floors, etc) and create anchors for "
-"them.\n"
-"This node is mapped to one of the anchors through its unique ID. When you "
-"receive a signal that a new anchor is available, you should add this node to "
-"your scene for that anchor. You can predefine nodes and set the ID; the "
-"nodes will simply remain on 0,0,0 until a plane is recognized.\n"
-"Keep in mind that, as long as plane detection is enabled, the size, placing "
-"and orientation of an anchor will be updated as the detection logic learns "
-"more about the real world out there especially if only part of the surface "
-"is in view."
-msgstr ""
-"Der [ARVRAnchor]-Punkt ist ein räumlicher Knoten, der einen von der AR-"
-"Plattform identifizierten Standort in der realen Welt auf eine Position "
-"innerhalb der Spielwelt abbildet. Solange z. B. die Ebenenerkennung in ARKit "
-"aktiviert ist, identifiziert und aktualisiert ARKit die Position von Ebenen "
-"(Tische, Böden usw.) und erstellt Anker für sie.\n"
-"Dieser Knoten wird durch seine eindeutige ID auf einen der Anker abgebildet. "
-"Wenn Sie ein Signal erhalten, dass ein neuer Anker verfügbar ist, sollten "
-"Sie diesen Knoten zu Ihrer Szene für diesen Anker hinzufügen. Sie können "
-"Knoten vordefinieren und die ID festlegen; die Knoten bleiben dann einfach "
-"auf 0,0,0, bis eine Ebene erkannt wird.\n"
-"Denken Sie daran, dass, solange die Ebenenerkennung aktiviert ist, die "
-"Größe, Platzierung und Ausrichtung eines Ankers aktualisiert wird, da die "
-"Erkennungslogik mehr über die reale Welt da draußen erfährt, insbesondere "
-"wenn nur ein Teil der Oberfläche im Blickfeld ist."
-
-#: doc/classes/ARVRAnchor.xml
-msgid "Returns the name given to this anchor."
-msgstr "Gibt den Namen zurück, der diesem Anker gegeben wurde."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"Returns [code]true[/code] if the anchor is being tracked and [code]false[/"
-"code] if no anchor with this ID is currently known."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Anker verfolgt wird, und "
-"[code]false[/code], wenn derzeit kein Anker mit dieser ID bekannt ist."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"If provided by the [ARVRInterface], this returns a mesh object for the "
-"anchor. For an anchor, this can be a shape related to the object being "
-"tracked or it can be a mesh that provides topology related to the anchor and "
-"can be used to create shadows/reflections on surfaces or for generating "
-"collision shapes."
-msgstr ""
-"Falls vom [ARVRInterface] bereitgestellt, wird ein Mesh-Objekt für den Anker "
-"zurückgegeben. Bei einem Anker kann es sich um eine Form handeln, die sich "
-"auf das verfolgte Objekt bezieht, oder um ein Mesh, das eine Topologie in "
-"Bezug auf den Anker bietet und zur Erstellung von Schatten/Reflexionen auf "
-"Oberflächen oder zur Erzeugung von Kollisionsformen verwendet werden kann."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"Returns a plane aligned with our anchor; handy for intersection testing."
-msgstr ""
-"Gibt eine Ebene zurück, die an unserem Anker ausgerichtet ist; praktisch für "
-"Schnittpunkttests."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"Returns the estimated size of the plane that was detected. Say when the "
-"anchor relates to a table in the real world, this is the estimated size of "
-"the surface of that table."
-msgstr ""
-"Gibt die geschätzte Größe der erkannten Fläche zurück. Wenn sich der Anker "
-"beispielsweise auf einen Tisch in der realen Welt bezieht, ist dies die "
-"geschätzte Größe der Oberfläche dieses Tisches."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"The anchor's ID. You can set this before the anchor itself exists. The first "
-"anchor gets an ID of [code]1[/code], the second an ID of [code]2[/code], "
-"etc. When anchors get removed, the engine can then assign the corresponding "
-"ID to new anchors. The most common situation where anchors \"disappear\" is "
-"when the AR server identifies that two anchors represent different parts of "
-"the same plane and merges them."
-msgstr ""
-"Die ID des Ankers. Sie können diese festlegen, bevor der Anker selbst "
-"existiert. Der erste Anker erhält eine ID von [code]1[/code], der zweite "
-"eine ID von [code]2[/code] usw. Wenn Anker entfernt werden, kann die Engine "
-"dann die entsprechende ID neuen Ankern zuweisen. Die häufigste Situation, in "
-"der Anker \"verschwinden\", ist, wenn der AR-Server feststellt, dass zwei "
-"Anker verschiedene Teile derselben Ebene darstellen, und sie zusammenführt."
-
-#: doc/classes/ARVRAnchor.xml
-msgid ""
-"Emitted when the mesh associated with the anchor changes or when one becomes "
-"available. This is especially important for topology that is constantly "
-"being [code]mesh_updated[/code]."
-msgstr ""
-"Wird ausgesendet, wenn sich das mit dem Anker verbundene Netz ändert oder "
-"eines verfügbar wird. Dies ist besonders wichtig für eine Topologie, die "
-"ständig [code]mesh_updated[/code] wird."
-
-#: doc/classes/ARVRCamera.xml
-msgid ""
-"A camera node with a few overrules for AR/VR applied, such as location "
-"tracking."
-msgstr ""
-"Ein Kameraknoten, der einige Grundregeln für AR/VR anwendet, z. B. die "
-"Standortverfolgung."
-
-#: doc/classes/ARVRCamera.xml
-msgid ""
-"This is a helper spatial node for our camera; note that, if stereoscopic "
-"rendering is applicable (VR-HMD), most of the camera properties are ignored, "
-"as the HMD information overrides them. The only properties that can be "
-"trusted are the near and far planes.\n"
-"The position and orientation of this node is automatically updated by the "
-"ARVR Server to represent the location of the HMD if such tracking is "
-"available and can thus be used by game logic. Note that, in contrast to the "
-"ARVR Controller, the render thread has access to the most up-to-date "
-"tracking data of the HMD and the location of the ARVRCamera can lag a few "
-"milliseconds behind what is used for rendering as a result."
-msgstr ""
-"Dies ist ein räumlicher Hilfsknoten für unsere Kamera; beachten Sie, dass "
-"bei stereoskopischem Rendering (VR-HMD) die meisten Kameraeigenschaften "
-"ignoriert werden, da die HMD-Informationen sie außer Kraft setzen. Die "
-"einzigen Eigenschaften, auf die man sich verlassen kann, sind die Nah- und "
-"Fern-Ebene.\n"
-"Die Position und Ausrichtung dieses Knotens wird vom ARVR-Server automatisch "
-"aktualisiert, um die Position des HMD darzustellen, wenn eine solche "
-"Verfolgung verfügbar ist, und kann somit von der Spiellogik verwendet "
-"werden. Beachten Sie, dass der Render-Thread im Gegensatz zum ARVR "
-"Controller Zugriff auf die aktuellsten Tracking-Daten des HMD hat und die "
-"Position der ARVRCamera daher einige Millisekunden hinter dem zurückbleiben "
-"kann, was für das Rendering verwendet wird."
-
-#: doc/classes/ARVRController.xml
-msgid "A spatial node representing a spatially-tracked controller."
-msgstr ""
-"Ein räumlicher Knoten, der einen räumlich verfolgten Controller darstellt."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"This is a helper spatial node that is linked to the tracking of controllers. "
-"It also offers several handy passthroughs to the state of buttons and such "
-"on the controllers.\n"
-"Controllers are linked by their ID. You can create controller nodes before "
-"the controllers are available. If your game always uses two controllers (one "
-"for each hand), you can predefine the controllers with ID 1 and 2; they will "
-"become active as soon as the controllers are identified. If you expect "
-"additional controllers to be used, you should react to the signals and add "
-"ARVRController nodes to your scene.\n"
-"The position of the controller node is automatically updated by the "
-"[ARVRServer]. This makes this node ideal to add child nodes to visualize the "
-"controller."
-msgstr ""
-"Dies ist ein räumlicher Hilfsknoten, der mit der Verfolgung von Controllern "
-"verbunden ist. Er bietet auch mehrere praktische Durchreichungen für den "
-"Zustand von Schaltflächen und dergleichen auf den Controllern.\n"
-"Controller sind durch ihre ID verknüpft. Sie können Controller-Knoten "
-"erstellen, bevor die Controller verfügbar sind. Wenn Ihr Spiel immer zwei "
-"Controller verwendet (einen für jede Hand), können Sie die Controller mit "
-"der ID 1 und 2 vordefinieren; sie werden aktiv, sobald die Controller "
-"erkannt werden. Wenn Sie erwarten, dass zusätzliche Controller verwendet "
-"werden, sollten Sie auf die Signale reagieren und ARVRController-Knoten zu "
-"Ihrer Szene hinzufügen.\n"
-"Die Position des Controllerknotens wird automatisch durch den [ARVRServer] "
-"aktualisiert. Dies macht diesen Knoten ideal, um Kindknoten zur "
-"Visualisierung des Controllers hinzuzufügen."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"If active, returns the name of the associated controller if provided by the "
-"AR/VR SDK used."
-msgstr ""
-"Wenn aktiv, wird der Name des zugehörigen Controllers zurückgegeben, sofern "
-"er vom verwendeten AR/VR-SDK bereitgestellt wird."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"Returns the hand holding this controller, if known. See [enum "
-"ARVRPositionalTracker.TrackerHand]."
-msgstr ""
-"Gibt die Hand zurück, die diesen Controller hält, falls bekannt. Siehe [enum "
-"ARVRPositionalTracker.TrackerHand]."
-
-#: doc/classes/ARVRController.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the bound controller is active. ARVR systems "
-"attempt to track active controllers."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Übergang zwischen den übergebenen "
-"Nodes existiert."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"Returns the value of the given axis for things like triggers, touchpads, "
-"etc. that are embedded into the controller."
-msgstr ""
-"Gibt den Wert der angegebenen Achse für Dinge wie Trigger, Touchpads usw. "
-"zurück, die in den Controller eingebettet sind."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"Returns the ID of the joystick object bound to this. Every controller "
-"tracked by the [ARVRServer] that has buttons and axis will also be "
-"registered as a joystick within Godot. This means that all the normal "
-"joystick tracking and input mapping will work for buttons and axis found on "
-"the AR/VR controllers. This ID is purely offered as information so you can "
-"link up the controller with its joystick entry."
-msgstr ""
-"Gibt die ID des Joystick-Objekts zurück, das mit diesem verbunden ist. Jeder "
-"vom [ARVRServer] verfolgte Controller, der Tasten und Achsen hat, wird auch "
-"als Joystick in Godot registriert. Das bedeutet, dass alle normalen Joystick-"
-"Verfolgungen und Eingabe-Zuordnungen für Tasten und Achsen auf den AR/VR-"
-"Controllern funktionieren werden. Diese ID wird lediglich als Information "
-"angeboten, damit Sie den Controller mit seinem Joystick-Eintrag verknüpfen "
-"können."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"If provided by the [ARVRInterface], this returns a mesh associated with the "
-"controller. This can be used to visualize the controller."
-msgstr ""
-"Falls von der [ARVRInterface] bereitgestellt, wird ein mit dem Controller "
-"verbundenes Netz zurückgegeben. Dieses kann zur Visualisierung des "
-"Controllers verwendet werden."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"Returns [code]true[/code] if the button at index [code]button[/code] is "
-"pressed. See [enum JoystickList], in particular the [code]JOY_VR_*[/code] "
-"constants."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Taste bei Index [code]button[/code] "
-"gedrückt ist. Siehe [enum JoystickList], insbesondere die [code]JOY_VR_*[/"
-"code] Konstanten."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"The controller's ID.\n"
-"A controller ID of 0 is unbound and will always result in an inactive node. "
-"Controller ID 1 is reserved for the first controller that identifies itself "
-"as the left-hand controller and ID 2 is reserved for the first controller "
-"that identifies itself as the right-hand controller.\n"
-"For any other controller that the [ARVRServer] detects, we continue with "
-"controller ID 3.\n"
-"When a controller is turned off, its slot is freed. This ensures controllers "
-"will keep the same ID even when controllers with lower IDs are turned off."
-msgstr ""
-"Die ID des Controllers.\n"
-"Eine Controller-ID von 0 ist ungebunden und führt immer zu einem inaktiven "
-"Knoten. Die Controller-ID 1 ist für den ersten Controller reserviert, der "
-"sich als linker Controller identifiziert, und die ID 2 ist für den ersten "
-"Controller reserviert, der sich als rechter Controller identifiziert.\n"
-"Für jeden weiteren Controller, den der [ARVRServer] erkennt, wird mit der "
-"Controller-ID 3 fortgefahren.\n"
-"Wenn ein Controller ausgeschaltet wird, wird sein Steckplatz freigegeben. "
-"Dadurch wird sichergestellt, dass die Controller dieselbe ID behalten, auch "
-"wenn Controller mit niedrigeren IDs ausgeschaltet werden."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"The degree to which the controller vibrates. Ranges from [code]0.0[/code] to "
-"[code]1.0[/code]. If changed, updates [member ARVRPositionalTracker.rumble] "
-"accordingly.\n"
-"This is a useful property to animate if you want the controller to vibrate "
-"for a limited duration."
-msgstr ""
-"Der Grad, in dem die Steuerung vibriert. Der Bereich reicht von [code]0.0[/"
-"code] bis [code]1.0[/code]. Wenn er geändert wird, wird [member "
-"ARVRPositionalTracker.rumble] entsprechend aktualisiert.\n"
-"Dies ist eine nützliche Eigenschaft zum Animieren, wenn der Controller für "
-"eine begrenzte Dauer vibrieren soll."
-
-#: doc/classes/ARVRController.xml
-msgid "Emitted when a button on this controller is pressed."
-msgstr ""
-"Wird ausgesendet, wenn eine Taste auf diesem Steuergerät gedrückt wird."
-
-#: doc/classes/ARVRController.xml
-msgid "Emitted when a button on this controller is released."
-msgstr ""
-"Wird ausgesendet, wenn eine Taste an diesem Controller losgelassen wird."
-
-#: doc/classes/ARVRController.xml
-msgid ""
-"Emitted when the mesh associated with the controller changes or when one "
-"becomes available. Generally speaking this will be a static mesh after "
-"becoming available."
-msgstr ""
-"Wird ausgesendet, wenn sich das mit dem Controller verknüpfte Netz ändert "
-"oder wenn eines verfügbar wird. Im Allgemeinen wird dies ein statisches Mesh "
-"sein, nachdem es verfügbar geworden ist."
-
-#: doc/classes/ARVRInterface.xml
-msgid "Base class for an AR/VR interface implementation."
-msgstr "Basisklasse für die Implementierung einer AR/VR-Schnittstelle."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"This class needs to be implemented to make an AR or VR platform available to "
-"Godot and these should be implemented as C++ modules or GDNative modules "
-"(note that for GDNative the subclass ARVRScriptInterface should be used). "
-"Part of the interface is exposed to GDScript so you can detect, enable and "
-"configure an AR or VR platform.\n"
-"Interfaces should be written in such a way that simply enabling them will "
-"give us a working setup. You can query the available interfaces through "
-"[ARVRServer]."
-msgstr ""
-"Diese Klasse muss implementiert werden, um eine AR- oder VR-Plattform für "
-"Godot verfügbar zu machen. Diese sollten als C++-Module oder GDNative-Module "
-"implementiert werden (beachten Sie, dass für GDNative die Unterklasse "
-"ARVRScriptInterface verwendet werden sollte). Ein Teil der Schnittstelle ist "
-"für GDScript offengelegt, so dass Sie eine AR- oder VR-Plattform erkennen, "
-"aktivieren und konfigurieren können.\n"
-"Die Schnittstellen sollten so geschrieben sein, dass man durch einfaches "
-"Aktivieren ein funktionierendes Setup erhält. Sie können die verfügbaren "
-"Schnittstellen über [ARVRServer] abfragen."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"If this is an AR interface that requires displaying a camera feed as the "
-"background, this method returns the feed ID in the [CameraServer] for this "
-"interface."
-msgstr ""
-"Wenn es sich um eine AR-Schnittstelle handelt, die die Anzeige eines "
-"Kamerafeeds als Hintergrund erfordert, gibt diese Methode die Feed-ID im "
-"[CameraServer] für diese Schnittstelle zurück."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Returns a combination of [enum Capabilities] flags providing information "
-"about the capabilities of this interface."
-msgstr ""
-"Gibt eine Kombination von [enum Capabilities]-Flags zurück, die "
-"Informationen über die Fähigkeiten dieser Schnittstelle liefern."
-
-#: doc/classes/ARVRInterface.xml
-msgid "Returns the name of this interface (OpenVR, OpenHMD, ARKit, etc)."
-msgstr ""
-"Gibt den Namen dieser Schnittstelle zurück (OpenVR, OpenHMD, ARKit, etc.)."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Returns the resolution at which we should render our intermediate results "
-"before things like lens distortion are applied by the VR platform."
-msgstr ""
-"Gibt die Auflösung zurück, mit der wir unsere Zwischenergebnisse rendern "
-"sollten, bevor Dinge wie Linsenverzerrungen von der VR-Plattform angewendet "
-"werden."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"If supported, returns the status of our tracking. This will allow you to "
-"provide feedback to the user whether there are issues with positional "
-"tracking."
-msgstr ""
-"Gibt, falls unterstützt, den Status unserer Positionsbestimmung zurück. So "
-"können Sie dem Benutzer eine Rückmeldung geben, ob es Probleme mit der "
-"Positionsbestimmung gibt."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Call this to initialize this interface. The first interface that is "
-"initialized is identified as the primary interface and it will be used for "
-"rendering output.\n"
-"After initializing the interface you want to use you then need to enable the "
-"AR/VR mode of a viewport and rendering should commence.\n"
-"[b]Note:[/b] You must enable the AR/VR mode on the main viewport for any "
-"device that uses the main output of Godot, such as for mobile VR.\n"
-"If you do this for a platform that handles its own output (such as OpenVR) "
-"Godot will show just one eye without distortion on screen. Alternatively, "
-"you can add a separate viewport node to your scene and enable AR/VR on that "
-"viewport. It will be used to output to the HMD, leaving you free to do "
-"anything you like in the main window, such as using a separate camera as a "
-"spectator camera or rendering something completely different.\n"
-"While currently not used, you can activate additional interfaces. You may "
-"wish to do this if you want to track controllers from other platforms. "
-"However, at this point in time only one interface can render to an HMD."
-msgstr ""
-"Rufen Sie dies auf, um diese Schnittstelle zu initialisieren. Die erste "
-"Schnittstelle, die initialisiert wird, wird als primäre Schnittstelle "
-"identifiziert und wird für die Rendering-Ausgabe verwendet.\n"
-"Nach der Initialisierung der Schnittstelle, die Sie verwenden möchten, "
-"müssen Sie den AR/VR-Modus eines Ansichtsfensters aktivieren und das "
-"Rendering sollte beginnen.\n"
-"[b]Hinweis:[/b] Sie müssen den AR/VR-Modus im Haupt-Viewport für jedes Gerät "
-"aktivieren, das die Hauptausgabe von Godot verwendet, z. B. für mobile VR.\n"
-"Wenn Sie dies für eine Plattform tun, die ihre eigene Ausgabe verarbeitet "
-"(wie OpenVR), zeigt Godot nur ein Auge ohne Verzerrung auf dem Bildschirm "
-"an. Alternativ können Sie einen separaten Viewport-Knoten zu Ihrer Szene "
-"hinzufügen und AR/VR in diesem Viewport aktivieren. Es wird für die Ausgabe "
-"an das HMD verwendet, so dass Sie im Hauptfenster alles tun können, was Sie "
-"möchten, z. B. eine separate Kamera als Zuschauerkamera verwenden oder etwas "
-"völlig anderes rendern.\n"
-"Sie können zusätzliche Schnittstellen aktivieren, die derzeit nicht "
-"verwendet werden. Dies kann sinnvoll sein, wenn Sie Controller von anderen "
-"Plattformen verfolgen wollen. Zum jetzigen Zeitpunkt kann jedoch nur eine "
-"Schnittstelle auf ein HMD gerendert werden."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Returns [code]true[/code] if the current output of this interface is in "
-"stereo."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die aktuelle Ausgabe dieser "
-"Schnittstelle in Stereo ist."
-
-#: doc/classes/ARVRInterface.xml
-msgid "Turns the interface off."
-msgstr "Schaltet die Schnittstelle aus."
-
-#: doc/classes/ARVRInterface.xml
-msgid "On an AR interface, [code]true[/code] if anchor detection is enabled."
-msgstr ""
-"Auf einer AR-Schnittstelle: [code]true[/code], wenn die Ankererkennung "
-"aktiviert ist."
-
-#: doc/classes/ARVRInterface.xml
-msgid "[code]true[/code] if this interface been initialized."
-msgstr "[code]true[/code] wenn diese Schnittstelle initialisiert wurde."
-
-#: doc/classes/ARVRInterface.xml
-msgid "[code]true[/code] if this is the primary interface."
-msgstr "[code]true[/code], wenn dies die primäre Schnittstelle ist."
-
-#: doc/classes/ARVRInterface.xml
-msgid "No ARVR capabilities."
-msgstr "Keine ARVR-Fähigkeiten."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"This interface can work with normal rendering output (non-HMD based AR)."
-msgstr ""
-"Diese Schnittstelle kann mit normaler Rendering-Ausgabe arbeiten (nicht-HMD-"
-"basierte AR)."
-
-#: doc/classes/ARVRInterface.xml
-msgid "This interface supports stereoscopic rendering."
-msgstr "Diese Schnittstelle unterstützt das stereoskopische Rendering."
-
-#: doc/classes/ARVRInterface.xml
-msgid "This interface supports AR (video background and real world tracking)."
-msgstr ""
-"Diese Schnittstelle unterstützt AR (Video-Hintergrund und Real-World-"
-"Tracking)."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"This interface outputs to an external device. If the main viewport is used, "
-"the on screen output is an unmodified buffer of either the left or right eye "
-"(stretched if the viewport size is not changed to the same aspect ratio of "
-"[method get_render_targetsize]). Using a separate viewport node frees up the "
-"main viewport for other purposes."
-msgstr ""
-"Diese Schnittstelle gibt die Daten an ein externes Gerät aus. Wird das "
-"Hauptansichtsfenster verwendet, ist die Bildschirmausgabe ein unveränderter "
-"Puffer entweder des linken oder des rechten Auges (gestreckt, wenn die Größe "
-"des Ansichtsfensters nicht auf das gleiche Seitenverhältnis von [method "
-"get_render_targetsize] geändert wird). Die Verwendung eines separaten "
-"Ansichtsfenster-Knotens macht das Hauptansichtfenster für andere Zwecke frei."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Mono output, this is mostly used internally when retrieving positioning "
-"information for our camera node or when stereo scopic rendering is not "
-"supported."
-msgstr ""
-"Mono-Ausgabe, diese wird meist intern verwendet, wenn "
-"Positionierungsinformationen für unseren Kameraknoten abgerufen werden oder "
-"wenn das stereoskopische Rendering nicht unterstützt wird."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Left eye output, this is mostly used internally when rendering the image for "
-"the left eye and obtaining positioning and projection information."
-msgstr ""
-"Die Ausgabe für das linke Auge wird hauptsächlich intern verwendet, um das "
-"Bild für das linke Auge zu rendern und Informationen zur Positionierung und "
-"Projektion zu erhalten."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Right eye output, this is mostly used internally when rendering the image "
-"for the right eye and obtaining positioning and projection information."
-msgstr ""
-"Die Ausgabe für das rechte Auge wird hauptsächlich intern verwendet, um das "
-"Bild für das rechte Auge zu rendern und Informationen zur Positionierung und "
-"Projektion zu erhalten."
-
-#: doc/classes/ARVRInterface.xml
-msgid "Tracking is behaving as expected."
-msgstr "Das Tracking verhält sich wie erwartet."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Tracking is hindered by excessive motion (the player is moving faster than "
-"tracking can keep up)."
-msgstr ""
-"Das Tracking wird durch übermäßige Bewegung behindert (der Spieler bewegt "
-"sich schneller, als die Verfolgung mithalten kann)."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Tracking is hindered by insufficient features, it's too dark (for camera-"
-"based tracking), player is blocked, etc."
-msgstr ""
-"Das Tracking wird durch unzureichende Fähigkeiten behindert, es ist zu "
-"dunkel (für kamerabasiertes Tracking), der Spieler ist blockiert, usw."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"We don't know the status of the tracking or this interface does not provide "
-"feedback."
-msgstr ""
-"Wir kennen den Status der Nachverfolgung nicht, oder diese Schnittstelle "
-"gibt keine Rückmeldung."
-
-#: doc/classes/ARVRInterface.xml
-msgid ""
-"Tracking is not functional (camera not plugged in or obscured, lighthouses "
-"turned off, etc.)."
-msgstr ""
-"Das Tracking funktioniert nicht (Kamera nicht eingesteckt oder verdeckt, "
-"Lighthouses ausgeschaltet usw.)."
-
-#: modules/gdnative/doc_classes/ARVRInterfaceGDNative.xml
-msgid "GDNative wrapper for an ARVR interface."
-msgstr "GDNative-Wrapper für eine ARVR-Schnittstelle."
-
-#: modules/gdnative/doc_classes/ARVRInterfaceGDNative.xml
-msgid ""
-"This is a wrapper class for GDNative implementations of the ARVR interface. "
-"To use a GDNative ARVR interface, simply instantiate this object and set "
-"your GDNative library containing the ARVR interface implementation."
-msgstr ""
-"Dies ist eine Wrapper-Klasse für GDNative-Implementierungen der ARVR-"
-"Schnittstelle. Um eine GDNative-ARVR-Schnittstelle zu verwenden, "
-"instanziieren Sie einfach dieses Objekt und definieren Sie Ihre GDNative-"
-"Bibliothek, die die ARVR-Schnittstellenimplementierung enthält."
-
-#: doc/classes/ARVROrigin.xml
-msgid "The origin point in AR/VR."
-msgstr "Der Ursprungspunkt in AR/VR."
-
-#: doc/classes/ARVROrigin.xml
-msgid ""
-"This is a special node within the AR/VR system that maps the physical "
-"location of the center of our tracking space to the virtual location within "
-"our game world.\n"
-"There should be only one of these nodes in your scene and you must have one. "
-"All the ARVRCamera, ARVRController and ARVRAnchor nodes should be direct "
-"children of this node for spatial tracking to work correctly.\n"
-"It is the position of this node that you update when your character needs to "
-"move through your game world while we're not moving in the real world. "
-"Movement in the real world is always in relation to this origin point.\n"
-"For example, if your character is driving a car, the ARVROrigin node should "
-"be a child node of this car. Or, if you're implementing a teleport system to "
-"move your character, you should change the position of this node."
-msgstr ""
-"Dies ist ein spezieller Knoten innerhalb des AR/VR-Systems, der die "
-"physische Position des Zentrums unseres Tracking-Raums der virtuellen "
-"Position innerhalb unserer Spielwelt zuordnet.\n"
-"Es sollte nur einen dieser Knoten in Ihrer Szene geben und Sie müssen einen "
-"haben. Alle ARVRCamera-, ARVRController- und ARVRAnchor-Knoten sollten "
-"direkte Kinder dieses Knotens sein, damit das räumliche Tracking korrekt "
-"funktioniert.\n"
-"Es ist die Position dieses Knotens, die du aktualisierst, wenn dein "
-"Charakter sich durch deine Spielwelt bewegen muss, während wir uns in der "
-"realen Welt nicht bewegen. Die Bewegung in der realen Welt erfolgt immer in "
-"Bezug auf diesen Ursprungspunkt.\n"
-"Wenn deine Figur zum Beispiel ein Auto fährt, sollte der ARVROrigin-Knoten "
-"ein untergeordneter Knoten dieses Autos sein. Oder wenn du ein Teleport-"
-"System implementierst, um deinen Charakter zu bewegen, solltest du die "
-"Position dieses Knotens ändern."
-
-#: doc/classes/ARVROrigin.xml
-msgid ""
-"Allows you to adjust the scale to your game's units. Most AR/VR platforms "
-"assume a scale of 1 game world unit = 1 real world meter.\n"
-"[b]Note:[/b] This method is a passthrough to the [ARVRServer] itself."
-msgstr ""
-"Ermöglicht es Ihnen, den Maßstab an die Einheiten Ihres Spiels anzupassen. "
-"Die meisten AR/VR-Plattformen gehen von einem Maßstab von 1 Einheit der "
-"Spielwelt = 1 Meter der realen Welt aus.\n"
-"[b]Hinweis:[/b] Diese Methode ist ein Passthrough zum [ARVRServer] selbst."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "A tracked object."
-msgstr "Ein getracktes Objekt."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid ""
-"An instance of this object represents a device that is tracked, such as a "
-"controller or anchor point. HMDs aren't represented here as they are handled "
-"internally.\n"
-"As controllers are turned on and the AR/VR interface detects them, instances "
-"of this object are automatically added to this list of active tracking "
-"objects accessible through the [ARVRServer].\n"
-"The [ARVRController] and [ARVRAnchor] both consume objects of this type and "
-"should be used in your project. The positional trackers are just under-the-"
-"hood objects that make this all work. These are mostly exposed so that "
-"GDNative-based interfaces can interact with them."
-msgstr ""
-"Eine Instanz dieses Objekts stellt ein Gerät dar, das verfolgt wird, z. B. "
-"einen Controller oder Ankerpunkt. HMDs werden hier nicht dargestellt, da sie "
-"intern gehandhabt werden.\n"
-"Wenn Controller eingeschaltet werden und die AR/VR-Schnittstelle sie "
-"erkennt, werden Instanzen dieses Objekts automatisch zur Liste der aktiven "
-"Tracking-Objekte hinzugefügt, die über den [ARVRServer] zugänglich sind.\n"
-"Der [ARVRController] und der [ARVRAnchor] verbrauchen beide Objekte dieses "
-"Typs und sollten in Ihrem Projekt verwendet werden. Die Positions-Tracker "
-"sind nur Objekte, die unter der Haube liegen und dafür sorgen, dass das "
-"alles funktioniert. Sie sind meist offengelegt, damit GDNative-basierte "
-"Schnittstellen mit ihnen interagieren können."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid ""
-"Returns the hand holding this tracker, if known. See [enum TrackerHand] "
-"constants."
-msgstr ""
-"Gibt die Hand zurück, die diesen Tracker hält, falls bekannt. Siehe [enum "
-"TrackerHand] Konstanten."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid ""
-"If this is a controller that is being tracked, the controller will also be "
-"represented by a joystick entry with this ID."
-msgstr ""
-"Wenn es sich um einen Controller handelt, der verfolgt wird, wird der "
-"Controller auch durch einen Joystick-Eintrag mit dieser ID dargestellt."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid ""
-"Returns the mesh related to a controller or anchor point if one is available."
-msgstr ""
-"Gibt das Netz zurück, das mit einem Controller oder Ankerpunkt verbunden "
-"ist, falls ein solcher vorhanden ist."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns the controller or anchor point's name if available."
-msgstr ""
-"Gibt den Namen des Controllers oder des Ankerpunkts zurück, falls vorhanden."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns the controller's orientation matrix."
-msgstr "Gibt die Orientierungsmatrix des Controllers zurück."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns the world-space controller position."
-msgstr "Gibt die Position des Controllers im Raum zurück."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid ""
-"Returns the internal tracker ID. This uniquely identifies the tracker per "
-"tracker type and matches the ID you need to specify for nodes such as the "
-"[ARVRController] and [ARVRAnchor] nodes."
-msgstr ""
-"Gibt die interne Tracker-ID zurück. Diese identifiziert den Tracker "
-"eindeutig pro Tracker-Typ und entspricht der ID, die Sie für Knoten wie die "
-"[ARVRController]- und [ARVRAnchor]-Knoten angeben müssen."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns [code]true[/code] if this device tracks orientation."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn dieses Gerät die Ausrichtung verfolgt."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns [code]true[/code] if this device tracks position."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn dieses Gerät die Position verfolgt."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns the transform combining this device's orientation and position."
-msgstr ""
-"Gibt die Transformation zurück, die die Ausrichtung und Position dieses "
-"Geräts kombiniert."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "Returns the tracker's type."
-msgstr "Gibt den Typ des Tracker zurück."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid ""
-"The degree to which the tracker rumbles. Ranges from [code]0.0[/code] to "
-"[code]1.0[/code] with precision [code].01[/code]."
-msgstr ""
-"Der Grad, wie stark der Tracker wackelt. Der Bereich reicht von [code]0.0[/"
-"code] bis [code]1.0[/code] mit einer Genauigkeit von [code].01[/code]."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "The hand this tracker is held in is unknown or not applicable."
-msgstr ""
-"Die Hand, in der dieser Tracker gehalten wird, ist unbekannt oder nicht "
-"anwendbar."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "This tracker is the left hand controller."
-msgstr "Dieser Tracker ist der Controller für die linke Hand."
-
-#: doc/classes/ARVRPositionalTracker.xml
-msgid "This tracker is the right hand controller."
-msgstr "Dieser Tracker ist der Controller für die rechte Hand."
-
-#: doc/classes/ARVRServer.xml
-msgid "Server for AR and VR features."
-msgstr "Server für AR- und VR-Funktionen."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"The AR/VR server is the heart of our Advanced and Virtual Reality solution "
-"and handles all the processing."
-msgstr ""
-"Der AR/VR-Server ist das Herzstück unserer Advanced and Virtual Reality-"
-"Lösung und übernimmt die gesamte Verarbeitung."
-
-#: doc/classes/ARVRServer.xml
-msgid "Registers an [ARVRInterface] object."
-msgstr "Registriert ein [ARVRInterface]-Objekt."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Registers a new [ARVRPositionalTracker] that tracks a spatial location in "
-"real space."
-msgstr ""
-"Registriert einen neuen [ARVRPositionalTracker], der eine räumliche Position "
-"im realen Raum verfolgt."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"This is an important function to understand correctly. AR and VR platforms "
-"all handle positioning slightly differently.\n"
-"For platforms that do not offer spatial tracking, our origin point (0,0,0) "
-"is the location of our HMD, but you have little control over the direction "
-"the player is facing in the real world.\n"
-"For platforms that do offer spatial tracking, our origin point depends very "
-"much on the system. For OpenVR, our origin point is usually the center of "
-"the tracking space, on the ground. For other platforms, it's often the "
-"location of the tracking camera.\n"
-"This method allows you to center your tracker on the location of the HMD. It "
-"will take the current location of the HMD and use that to adjust all your "
-"tracking data; in essence, realigning the real world to your player's "
-"current position in the game world.\n"
-"For this method to produce usable results, tracking information must be "
-"available. This often takes a few frames after starting your game.\n"
-"You should call this method after a few seconds have passed. For instance, "
-"when the user requests a realignment of the display holding a designated "
-"button on a controller for a short period of time, or when implementing a "
-"teleport mechanism."
-msgstr ""
-"Das ist eine wichtige Funktion, die man richtig verstehen muss. AR- und VR-"
-"Plattformen gehen alle etwas anders mit der Positionierung um.\n"
-"Bei Plattformen, die kein räumliches Tracking bieten, ist unser "
-"Ursprungspunkt (0,0,0) die Position unseres HMD, aber Sie haben wenig "
-"Kontrolle über die Richtung, in die der Spieler in der realen Welt blickt.\n"
-"Bei Plattformen, die räumliches Tracking bieten, hängt unser Ausgangspunkt "
-"sehr stark vom System ab. Bei OpenVR ist unser Ausgangspunkt in der Regel "
-"das Zentrum des Tracking-Raums, also auf dem Boden. Bei anderen Plattformen "
-"ist es oft die Position der Tracking-Kamera.\n"
-"Mit dieser Methode können Sie Ihren Tracker auf die Position des HMD "
-"zentrieren. Dabei wird die aktuelle Position des HMD verwendet, um alle "
-"Tracking-Daten anzupassen; im Wesentlichen wird die reale Welt an die "
-"aktuelle Position des Spielers in der Spielwelt angepasst.\n"
-"Damit diese Methode brauchbare Ergebnisse liefert, müssen Tracking-"
-"Informationen verfügbar sein. Dies dauert oft ein paar Frames nach dem Start "
-"des Spiels.\n"
-"Sie sollten diese Methode aufrufen, nachdem ein paar Sekunden vergangen "
-"sind. Zum Beispiel, wenn der Benutzer eine Neuausrichtung der Anzeige "
-"anfordert, indem er eine bestimmte Taste auf einem Controller für eine kurze "
-"Zeitspanne gedrückt hält, oder wenn er einen Teleportmechanismus "
-"implementiert."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Clears our current primary interface if it is set to the provided interface."
-msgstr ""
-"Löscht unsere aktuelle primäre Schnittstelle, wenn sie auf die angegebene "
-"Schnittstelle eingestellt ist."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Finds an interface by its name. For instance, if your project uses "
-"capabilities of an AR/VR platform, you can find the interface for that "
-"platform by name and initialize it."
-msgstr ""
-"Findet eine Schnittstelle anhand ihres Namens. Wenn Ihr Projekt z. B. die "
-"Funktionen einer AR/VR-Plattform nutzt, können Sie die Schnittstelle für "
-"diese Plattform anhand ihres Namens finden und sie initialisieren."
-
-#: doc/classes/ARVRServer.xml
-msgid "Returns the primary interface's transformation."
-msgstr "Gibt die Transformation der primären Schnittstelle zurück."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns the interface registered at a given index in our list of interfaces."
-msgstr ""
-"Gibt die Schnittstelle zurück, die unter einem bestimmten Index in unserer "
-"Liste der Schnittstellen registriert ist."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns the number of interfaces currently registered with the AR/VR server. "
-"If your project supports multiple AR/VR platforms, you can look through the "
-"available interface, and either present the user with a selection or simply "
-"try to initialize each interface and use the first one that returns "
-"[code]true[/code]."
-msgstr ""
-"Gibt die Anzahl der derzeit beim AR/VR-Server registrierten Schnittstellen "
-"zurück. Wenn Ihr Projekt mehrere AR/VR-Plattformen unterstützt, können Sie "
-"die verfügbaren Schnittstellen durchsehen und dem Benutzer entweder eine "
-"Auswahl präsentieren oder einfach versuchen, jede Schnittstelle zu "
-"initialisieren und die erste zu verwenden, die [code]true[/code] zurückgibt."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns a list of available interfaces the ID and name of each interface."
-msgstr ""
-"Liefert eine Liste der verfügbaren Schnittstellen, die ID und den Namen "
-"jeder Schnittstelle."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns the absolute timestamp (in μs) of the last [ARVRServer] commit of "
-"the AR/VR eyes to [VisualServer]. The value comes from an internal call to "
-"[method OS.get_ticks_usec]."
-msgstr ""
-"Gibt den absoluten Zeitstempel (in μs) der letzten [ARVRServer]-Übertragung "
-"der AR/VR-Augen an [VisualServer] zurück. Der Wert stammt aus einem internen "
-"Aufruf der [Methode OS.get_ticks_usec]."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns the duration (in μs) of the last frame. This is computed as the "
-"difference between [method get_last_commit_usec] and [method "
-"get_last_process_usec] when committing."
-msgstr ""
-"Gibt die Dauer (in μs) des letzten Frames zurück. Dies wird als Differenz "
-"zwischen [method get_last_commit_usec] und [method get_last_process_usec] "
-"beim Commit berechnet."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns the absolute timestamp (in μs) of the last [ARVRServer] process "
-"callback. The value comes from an internal call to [method OS."
-"get_ticks_usec]."
-msgstr ""
-"Gibt den absoluten Zeitstempel (in μs) des letzten [ARVRServer]-Prozess-"
-"Callbacks zurück. Der Wert stammt aus einem internen Aufruf der [Methode OS."
-"get_ticks_usec]."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Returns the reference frame transform. Mostly used internally and exposed "
-"for GDNative build interfaces."
-msgstr ""
-"Gibt die Transformation des Referenzrahmens zurück. Wird meist intern "
-"verwendet und für GDNative-Build-Schnittstellen bereitgestellt."
-
-#: doc/classes/ARVRServer.xml
-msgid "Returns the positional tracker at the given ID."
-msgstr "Gibt den Positionstracker an der angegebenen ID zurück."
-
-#: doc/classes/ARVRServer.xml
-msgid "Returns the number of trackers currently registered."
-msgstr "Gibt die Anzahl der derzeit registrierten Tracker zurück."
-
-#: doc/classes/ARVRServer.xml
-msgid "Removes this interface."
-msgstr "Entfernt diese Schnittstelle."
-
-#: doc/classes/ARVRServer.xml
-msgid "Removes this positional tracker."
-msgstr "Entfernt diesen Positionstracker."
-
-#: doc/classes/ARVRServer.xml
-msgid "The primary [ARVRInterface] currently bound to the [ARVRServer]."
-msgstr ""
-"Das primäre [ARVRInterface], das derzeit an den [ARVRServer] gebunden ist."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Allows you to adjust the scale to your game's units. Most AR/VR platforms "
-"assume a scale of 1 game world unit = 1 real world meter."
-msgstr ""
-"Ermöglicht es Ihnen, den Maßstab an die Einheiten Ihres Spiels anzupassen. "
-"Die meisten AR/VR-Plattformen gehen von einem Maßstab von 1 Einheit der "
-"Spielwelt = 1 Meter der realen Welt aus."
-
-#: doc/classes/ARVRServer.xml
-msgid "Emitted when a new interface has been added."
-msgstr "Wird ausgesendet, wenn eine neue Schnittstelle hinzugefügt wurde."
-
-#: doc/classes/ARVRServer.xml
-msgid "Emitted when an interface is removed."
-msgstr "Wird ausgesendet, wenn eine Schnittstelle entfernt wird."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Emitted when a new tracker has been added. If you don't use a fixed number "
-"of controllers or if you're using [ARVRAnchor]s for an AR solution, it is "
-"important to react to this signal to add the appropriate [ARVRController] or "
-"[ARVRAnchor] nodes related to this new tracker."
-msgstr ""
-"Wird ausgesendet, wenn ein neuer Tracker hinzugefügt wurde. Wenn Sie keine "
-"feste Anzahl von Controllern verwenden oder wenn Sie [ARVRAnchor]s für eine "
-"AR-Lösung verwenden, ist es wichtig, auf dieses Signal zu reagieren, um die "
-"entsprechenden [ARVRController]- oder [ARVRAnchor]-Knoten für diesen neuen "
-"Tracker hinzuzufügen."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Emitted when a tracker is removed. You should remove any [ARVRController] or "
-"[ARVRAnchor] points if applicable. This is not mandatory, the nodes simply "
-"become inactive and will be made active again when a new tracker becomes "
-"available (i.e. a new controller is switched on that takes the place of the "
-"previous one)."
-msgstr ""
-"Wird ausgesendet, wenn ein Tracker entfernt wird. Sie sollten alle "
-"[ARVRController]- oder [ARVRAnchor]-Punkte entfernen, falls zutreffend. Dies "
-"ist nicht zwingend erforderlich, die Knoten werden einfach inaktiv und "
-"werden wieder aktiv, wenn ein neuer Tracker verfügbar wird (d. h. ein neuer "
-"Controller wird eingeschaltet, der den vorherigen ersetzt)."
-
-#: doc/classes/ARVRServer.xml
-msgid "The tracker tracks the location of a controller."
-msgstr "Der Tracker tracktden Standort eines Controllers."
-
-#: doc/classes/ARVRServer.xml
-msgid "The tracker tracks the location of a base station."
-msgstr "Der Tracker trackt den Standort einer Basisstation."
-
-#: doc/classes/ARVRServer.xml
-msgid "The tracker tracks the location and size of an AR anchor."
-msgstr "Der Tracker trackt die Position und Größe eines AR-Ankers."
-
-#: doc/classes/ARVRServer.xml
-msgid "Used internally to filter trackers of any known type."
-msgstr "Wird intern verwendet, um Tracker jedes bekannten Typs zu filtern."
-
-#: doc/classes/ARVRServer.xml
-msgid "Used internally if we haven't set the tracker type yet."
-msgstr ""
-"Wird intern verwendet, wenn wir den Tracker-Typ noch nicht festgelegt haben."
-
-#: doc/classes/ARVRServer.xml
-msgid "Used internally to select all trackers."
-msgstr "Wird intern verwendet, um alle Tracker auszuwählen."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Fully reset the orientation of the HMD. Regardless of what direction the "
-"user is looking to in the real world. The user will look dead ahead in the "
-"virtual world."
-msgstr ""
-"Vollständige Rückstellung der Ausrichtung des HMD. Es spielt keine Rolle, in "
-"welche Richtung der Benutzer in der realen Welt schaut. Der Benutzer blickt "
-"in der virtuellen Welt genau nach vorne."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Resets the orientation but keeps the tilt of the device. So if we're looking "
-"down, we keep looking down but heading will be reset."
-msgstr ""
-"Setzt die Ausrichtung zurück, behält aber die Neigung des Geräts bei. Wenn "
-"wir also nach unten schauen, schauen wir weiterhin nach unten, aber die "
-"Ausrichtung wird zurückgesetzt."
-
-#: doc/classes/ARVRServer.xml
-msgid ""
-"Does not reset the orientation of the HMD, only the position of the player "
-"gets centered."
-msgstr ""
-"Die Ausrichtung des HMD wird nicht zurückgesetzt, nur die Position des "
-"Spielers wird zentriert."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid "Container that preserves its child controls' aspect ratio."
-msgstr ""
-"Container, der das Seitenverhältnis seiner untergeordneten Steuerelemente "
-"beibehält."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"Arranges child controls in a way to preserve their aspect ratio "
-"automatically whenever the container is resized. Solves the problem where "
-"the container size is dynamic and the contents' size needs to adjust "
-"accordingly without losing proportions."
-msgstr ""
-"Ordnet untergeordnete Steuerelemente so an, dass ihr Seitenverhältnis "
-"automatisch erhalten bleibt, wenn die Größe des Containers geändert wird. "
-"Löst das Problem, dass die Größe des Containers dynamisch ist und die Größe "
-"des Inhalts entsprechend angepasst werden muss, ohne dass die Proportionen "
-"verloren gehen."
-
-#: doc/classes/AspectRatioContainer.xml doc/classes/BoxContainer.xml
-#: doc/classes/CenterContainer.xml doc/classes/Container.xml
-#: doc/classes/GridContainer.xml doc/classes/HBoxContainer.xml
-#: doc/classes/HSplitContainer.xml doc/classes/MarginContainer.xml
-#: doc/classes/PanelContainer.xml doc/classes/ScrollContainer.xml
-#: doc/classes/SplitContainer.xml doc/classes/TabContainer.xml
-#: doc/classes/VBoxContainer.xml doc/classes/VSplitContainer.xml
-#, fuzzy
-msgid "GUI containers"
-msgstr "Tabulierter Container."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid "Specifies the horizontal relative position of child controls."
-msgstr ""
-"Gibt die horizontale relative Position der untergeordneten Steuerelemente an."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid "Specifies the vertical relative position of child controls."
-msgstr ""
-"Gibt die vertikale relative Position der untergeordneten Steuerelemente an."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"The aspect ratio to enforce on child controls. This is the width divided by "
-"the height. The ratio depends on the [member stretch_mode]."
-msgstr ""
-"Das Seitenverhältnis, das für untergeordnete Steuerelemente erzwungen werden "
-"soll. Dies ist die Breite geteilt durch die Höhe. Das Verhältnis hängt von "
-"dem [member stretch_mode] ab."
-
-#: doc/classes/AspectRatioContainer.xml
-#, fuzzy
-msgid "The stretch mode used to align child controls."
-msgstr "Der Anrufmodus, der für Spuren der Anrufmethode verwendet werden soll."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"The height of child controls is automatically adjusted based on the width of "
-"the container."
-msgstr ""
-"Die Höhe der untergeordneten Steuerelemente wird automatisch an die Breite "
-"des Containers angepasst."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"The width of child controls is automatically adjusted based on the height of "
-"the container."
-msgstr ""
-"Die Breite der untergeordneten Steuerelemente wird automatisch an die Höhe "
-"des Containers angepasst."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"The bounding rectangle of child controls is automatically adjusted to fit "
-"inside the container while keeping the aspect ratio."
-msgstr ""
-"Das Begrenzungsrechteck der untergeordneten Steuerelemente wird automatisch "
-"so angepasst, dass es in den Container passt, wobei das Seitenverhältnis "
-"beibehalten wird."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"The width and height of child controls is automatically adjusted to make "
-"their bounding rectangle cover the entire area of the container while "
-"keeping the aspect ratio.\n"
-"When the bounding rectangle of child controls exceed the container's size "
-"and [member Control.rect_clip_content] is enabled, this allows to show only "
-"the container's area restricted by its own bounding rectangle."
-msgstr ""
-"Die Breite und Höhe der untergeordneten Steuerelemente wird automatisch so "
-"angepasst, dass ihr Begrenzungsrechteck den gesamten Bereich des Containers "
-"abdeckt und das Seitenverhältnis beibehalten wird.\n"
-"Wenn das Begrenzungsrechteck der untergeordneten Steuerelemente die Größe "
-"des Containers überschreitet und [member Control.rect_clip_content] "
-"aktiviert ist, ermöglicht dies die Anzeige nur des Bereichs des Containers, "
-"der durch sein eigenes Begrenzungsrechteck begrenzt ist."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid ""
-"Aligns child controls with the beginning (left or top) of the container."
-msgstr ""
-"Richtet untergeordnete Steuerelemente am Anfang (links oder oben) des "
-"Containers aus."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid "Aligns child controls with the center of the container."
-msgstr "Richtet untergeordnete Steuerelemente an der Mitte des Containers aus."
-
-#: doc/classes/AspectRatioContainer.xml
-msgid "Aligns child controls with the end (right or bottom) of the container."
-msgstr ""
-"Richtet untergeordnete Steuerelemente am Ende (rechts oder unten) des "
-"Containers aus."
-
-#: doc/classes/AStar.xml
-msgid ""
-"An implementation of A* to find the shortest paths among connected points in "
-"space."
-msgstr ""
-"Eine Implementierung von A*, um die kürzesten Wege zwischen verbundenen "
-"Punkten im Raum zu finden."
-
-#: doc/classes/AStar.xml
-msgid ""
-"A* (A star) is a computer algorithm that is widely used in pathfinding and "
-"graph traversal, the process of plotting short paths among vertices "
-"(points), passing through a given set of edges (segments). It enjoys "
-"widespread use due to its performance and accuracy. Godot's A* "
-"implementation uses points in three-dimensional space and Euclidean "
-"distances by default.\n"
-"You must add points manually with [method add_point] and create segments "
-"manually with [method connect_points]. Then you can test if there is a path "
-"between two points with the [method are_points_connected] function, get a "
-"path containing indices by [method get_id_path], or one containing actual "
-"coordinates with [method get_point_path].\n"
-"It is also possible to use non-Euclidean distances. To do so, create a class "
-"that extends [code]AStar[/code] and override methods [method _compute_cost] "
-"and [method _estimate_cost]. Both take two indices and return a length, as "
-"is shown in the following example.\n"
-"[codeblock]\n"
-"class MyAStar:\n"
-"    extends AStar\n"
-"\n"
-"    func _compute_cost(u, v):\n"
-"        return abs(u - v)\n"
-"\n"
-"    func _estimate_cost(u, v):\n"
-"        return min(0, abs(u - v) - 1)\n"
-"[/codeblock]\n"
-"[method _estimate_cost] should return a lower bound of the distance, i.e. "
-"[code]_estimate_cost(u, v) <= _compute_cost(u, v)[/code]. This serves as a "
-"hint to the algorithm because the custom [code]_compute_cost[/code] might be "
-"computation-heavy. If this is not the case, make [method _estimate_cost] "
-"return the same value as [method _compute_cost] to provide the algorithm "
-"with the most accurate information.\n"
-"If the default [method _estimate_cost] and [method _compute_cost] methods "
-"are used, or if the supplied [method _estimate_cost] method returns a lower "
-"bound of the cost, then the paths returned by A* will be the lowest-cost "
-"paths. Here, the cost of a path equals the sum of the [method _compute_cost] "
-"results of all segments in the path multiplied by the [code]weight_scale[/"
-"code]s of the endpoints of the respective segments. If the default methods "
-"are used and the [code]weight_scale[/code]s of all points are set to "
-"[code]1.0[/code], then this equals the sum of Euclidean distances of all "
-"segments in the path."
-msgstr ""
-"A* ( A Star) ist ein Computeralgorithmus, der häufig bei der Pfadfindung und "
-"der Durchquerung von Graphen eingesetzt wird. Dabei werden kurze Pfade "
-"zwischen Vertices (Punkten) über eine bestimmte Menge von Kanten (Segmenten) "
-"gezeichnet. Aufgrund seiner Leistungsfähigkeit und Genauigkeit ist er weit "
-"verbreitet. Die A*-Implementierung von Godot verwendet standardmäßig Punkte "
-"im dreidimensionalen Raum und euklidische Abstände.\n"
-"Sie müssen Punkte manuell mit [method add_point] hinzufügen und Segmente "
-"manuell mit [method connect_points] erstellen. Anschließend können Sie mit "
-"der Funktion [method are_points_connected] prüfen, ob es einen Pfad zwischen "
-"zwei Punkten gibt, mit [method get_id_path] einen Pfad mit Indizes oder mit "
-"[method get_point_path] einen Pfad mit tatsächlichen Koordinaten erhalten.\n"
-"Es ist auch möglich, nicht-euklidische Distanzen zu verwenden. Erstellen Sie "
-"dazu eine Klasse, die [code]AStar[/code] erweitert und überschreiben Sie die "
-"Methoden [method _compute_cost] und [method _estimate_cost]. Beide nehmen "
-"zwei Indizes und geben eine Länge zurück, wie im folgenden Beispiel gezeigt "
-"wird.\n"
-"[codeblock]\n"
-"class MyAStar:\n"
-"    extends AStar\n"
-"\n"
-"    func _compute_cost(u, v):\n"
-"        return abs(u - v)\n"
-"\n"
-"    func _estimate_cost(u, v):\n"
-"        return min(0, abs(u - v) - 1)\n"
-"[/codeblock]\n"
-"Die [method_estimate_cost] sollte eine Untergrenze des Abstands zurückgeben, "
-"d.h. [code]_estimate_cost(u, v) <= _compute_cost(u, v)[/code]. Dies dient "
-"als Hinweis für den Algorithmus, da die benutzerdefinierten "
-"[code]_compute_cost[/code] möglicherweise sehr rechenintensiv sind. Wenn "
-"dies nicht der Fall ist, sollte [method _estimate_cost] denselben Wert wie "
-"[method _compute_cost] zurückgeben, um dem Algorithmus die genauesten "
-"Informationen zu liefern.\n"
-"Wenn die Standardmethoden [method _estimate_cost] und [method _compute_cost] "
-"verwendet werden oder wenn die mitgelieferte Methode [method _estimate_cost] "
-"eine untere Grenze der Kosten zurückgibt, dann sind die von A* "
-"zurückgegebenen Pfade die Pfade mit den niedrigsten Kosten. Dabei sind die "
-"Kosten eines Pfades gleich der Summe der [method _compute_cost]-Ergebnisse "
-"aller Segmente des Pfades multipliziert mit den [code]weight_scale[/code]s "
-"der Endpunkte der jeweiligen Segmente. Wenn die Standardmethoden verwendet "
-"werden und die [code]weight_scale[/code]s aller Punkte auf [code]1.0[/code] "
-"gesetzt werden, dann entspricht dies der Summe der euklidischen Abstände "
-"aller Segmente im Pfad."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Called when computing the cost between two connected points.\n"
-"Note that this function is hidden in the default [code]AStar[/code] class."
-msgstr ""
-"Wird aufgerufen, wenn die Kosten zwischen zwei verbundenen Punkten berechnet "
-"werden.\n"
-"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar[/code] "
-"verborgen ist."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Called when estimating the cost between a point and the path's ending "
-"point.\n"
-"Note that this function is hidden in the default [code]AStar[/code] class."
-msgstr ""
-"Wird aufgerufen, wenn die Kosten zwischen einem Punkt und dem Endpunkt des "
-"Pfades geschätzt werden.\n"
-"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar[/code] "
-"verborgen ist."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Adds a new point at the given position with the given identifier. The "
-"[code]id[/code] must be 0 or larger, and the [code]weight_scale[/code] must "
-"be 0.0 or greater.\n"
-"The [code]weight_scale[/code] is multiplied by the result of [method "
-"_compute_cost] when determining the overall cost of traveling across a "
-"segment from a neighboring point to this point. Thus, all else being equal, "
-"the algorithm prefers points with lower [code]weight_scale[/code]s to form a "
-"path.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(1, 0, 0), 4) # Adds the point (1, 0, 0) with "
-"weight_scale 4 and id 1\n"
-"[/codeblock]\n"
-"If there already exists a point for the given [code]id[/code], its position "
-"and weight scale are updated to the given values."
-msgstr ""
-"Fügt einen neuen Punkt an der angegebenen Position mit dem angegebenen "
-"Bezeichner hinzu. Die [code]id[/code] muss 0 oder größer sein, und die "
-"[code]weight_scale[/code] muss 0,0 oder größer sein.\n"
-"Der [code]weight_scale[/code] wird mit dem Ergebnis von [method "
-"_compute_cost] multipliziert, um die Gesamtkosten der Reise über ein Segment "
-"von einem benachbarten Punkt zu diesem Punkt zu ermitteln. Unter sonst "
-"gleichen Bedingungen bevorzugt der Algorithmus also Punkte mit niedrigeren "
-"[code]weight_scale[/code]s, um einen Pfad zu bilden.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(1, 0, 0), 4) # Fügt den Punkt (1, 0, 0) mit "
-"weight_scale 4 und id 1 hinzu\n"
-"[/codeblock]\n"
-"Wenn es bereits einen Punkt für die angegebene [code]id[/code] gibt, werden "
-"seine Position und Gewichtung auf die angegebenen Werte aktualisiert"
-
-#: doc/classes/AStar.xml
-msgid ""
-"Returns whether the two given points are directly connected by a segment. If "
-"[code]bidirectional[/code] is [code]false[/code], returns whether movement "
-"from [code]id[/code] to [code]to_id[/code] is possible through this segment."
-msgstr ""
-"Gibt zurück, ob die beiden angegebenen Punkte direkt durch ein Segment "
-"verbunden sind. Wenn [code]bidirectional[/code] [code]false[/code] ist, wird "
-"zurückgegeben, ob eine Bewegung von [code]id[/code] nach [code]to_id[/code] "
-"durch dieses Segment möglich ist."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid "Clears all the points and segments."
-msgstr "Löscht alle Punkte und Segmente."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Creates a segment between the given points. If [code]bidirectional[/code] is "
-"[code]false[/code], only movement from [code]id[/code] to [code]to_id[/code] "
-"is allowed, not the reverse direction.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(1, 1, 0))\n"
-"astar.add_point(2, Vector3(0, 5, 0))\n"
-"astar.connect_points(1, 2, false)\n"
-"[/codeblock]"
-msgstr ""
-"Erzeugt ein Segment zwischen den angegebenen Punkten. Wenn "
-"[code]bidirectional[/code] [code]false[/code] ist, ist nur die Bewegung von "
-"[code]id[/code] nach [code]to_id[/code] erlaubt, nicht die umgekehrte "
-"Richtung.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(1, 1, 0))\n"
-"astar.add_point(2, Vector3(0, 5, 0))\n"
-"astar.connect_points(1, 2, false)\n"
-"[/codeblock]"
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Deletes the segment between the given points. If [code]bidirectional[/code] "
-"is [code]false[/code], only movement from [code]id[/code] to [code]to_id[/"
-"code] is prevented, and a unidirectional segment possibly remains."
-msgstr ""
-"Löscht das Segment zwischen den angegebenen Punkten. Wenn "
-"[code]bidirectional[/code] [code]false[/code] ist, wird nur die Bewegung von "
-"[code]id[/code] nach [code]to_id[/code] verhindert, und es bleibt "
-"möglicherweise ein unidirektionales Segment übrig."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid "Returns the next available point ID with no point associated to it."
-msgstr ""
-"Gibt die nächste verfügbare Punkte-ID zurück, der kein Punkt zugeordnet ist."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Returns the ID of the closest point to [code]to_position[/code], optionally "
-"taking disabled points into account. Returns [code]-1[/code] if there are no "
-"points in the points pool.\n"
-"[b]Note:[/b] If several points are the closest to [code]to_position[/code], "
-"the one with the smallest ID will be returned, ensuring a deterministic "
-"result."
-msgstr ""
-"Gibt die ID des Punktes zurück, der [code]to_position[/code] am nächsten "
-"liegt, optional unter Berücksichtigung deaktivierter Punkte. Gibt [code]-1[/"
-"code] zurück, wenn es keine Punkte im Punktepool gibt.\n"
-"[b]Hinweis:[/b] Wenn mehrere Punkte der [code]to_position[/code] am nächsten "
-"liegen, wird der Punkt mit der kleinsten ID zurückgegeben, um ein "
-"deterministisches Ergebnis zu gewährleisten."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Returns the closest position to [code]to_position[/code] that resides inside "
-"a segment between two connected points.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(0, 0, 0))\n"
-"astar.add_point(2, Vector3(0, 5, 0))\n"
-"astar.connect_points(1, 2)\n"
-"var res = astar.get_closest_position_in_segment(Vector3(3, 3, 0)) # Returns "
-"(0, 3, 0)\n"
-"[/codeblock]\n"
-"The result is in the segment that goes from [code]y = 0[/code] to [code]y = "
-"5[/code]. It's the closest position in the segment to the given point."
-msgstr ""
-"Gibt die nächstgelegene Position zu [code]to_position[/code] zurück, die "
-"sich innerhalb eines Segments zwischen zwei verbundenen Punkten befindet.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(0, 0, 0))\n"
-"astar.add_point(2, Vector3(0, 5, 0))\n"
-"astar.connect_points(1, 2)\n"
-"var res = astar.get_closest_position_in_segment(Vector3(3, 3, 0)) # Gibt (0, "
-"3, 0) zurück\n"
-"[/codeblock]\n"
-"Das Ergebnis liegt in dem Segment, das von [code]y = 0[/code] bis [code]y = "
-"5[/code] reicht. Es ist die Position im Segment, die dem angegebenen Punkt "
-"am nächsten liegt."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Returns an array with the IDs of the points that form the path found by "
-"AStar between the given points. The array is ordered from the starting point "
-"to the ending point of the path.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(0, 0, 0))\n"
-"astar.add_point(2, Vector3(0, 1, 0), 1) # Default weight is 1\n"
-"astar.add_point(3, Vector3(1, 1, 0))\n"
-"astar.add_point(4, Vector3(2, 0, 0))\n"
-"\n"
-"astar.connect_points(1, 2, false)\n"
-"astar.connect_points(2, 3, false)\n"
-"astar.connect_points(4, 3, false)\n"
-"astar.connect_points(1, 4, false)\n"
-"\n"
-"var res = astar.get_id_path(1, 3) # Returns [1, 2, 3]\n"
-"[/codeblock]\n"
-"If you change the 2nd point's weight to 3, then the result will be [code][1, "
-"4, 3][/code] instead, because now even though the distance is longer, it's "
-"\"easier\" to get through point 4 than through point 2."
-msgstr ""
-"Gibt ein Array mit den IDs der Punkte zurück, die den von AStar gefundenen "
-"Pfad zwischen den angegebenen Punkten bilden. Das Array ist vom Startpunkt "
-"bis zum Endpunkt des Pfades geordnet.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(0, 0, 0))\n"
-"astar.add_point(2, Vector3(0, 1, 0), 1) # Standartgewichtung ist 1\n"
-"astar.add_point(3, Vector3(1, 1, 0))\n"
-"astar.add_point(4, Vector3(2, 0, 0))\n"
-"\n"
-"astar.connect_points(1, 2, false)\n"
-"astar.connect_points(2, 3, false)\n"
-"astar.connect_points(4, 3, false)\n"
-"astar.connect_points(1, 4, false)\n"
-"\n"
-"var res = astar.get_id_path(1, 3) # Gibt [1, 2, 3] zurück\n"
-"[/codeblock]\n"
-"Wenn du die Gewichtung des 2. Punktes auf 3 änderst, wird das Ergebnis "
-"stattdessen [code][1, 4, 3][/code] sein, weil es jetzt, obwohl die Strecke "
-"länger ist, \"einfacher\" ist, durch Punkt 4 zu kommen als durch Punkt 2."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Returns the capacity of the structure backing the points, useful in "
-"conjunction with [code]reserve_space[/code]."
-msgstr ""
-"Gibt die Kapazität der Struktur zurück, in der die Punkte gespeichert sind, "
-"nützlich in Verbindung mit [code]reserve_space[/code]."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Returns an array with the IDs of the points that form the connection with "
-"the given point.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(0, 0, 0))\n"
-"astar.add_point(2, Vector3(0, 1, 0))\n"
-"astar.add_point(3, Vector3(1, 1, 0))\n"
-"astar.add_point(4, Vector3(2, 0, 0))\n"
-"\n"
-"astar.connect_points(1, 2, true)\n"
-"astar.connect_points(1, 3, true)\n"
-"\n"
-"var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n"
-"[/codeblock]"
-msgstr ""
-"Gibt ein Array mit den IDs der Punkte zurück, die die Verbindung mit dem "
-"angegebenen Punkt bilden.\n"
-"[codeblock]\n"
-"var astar = AStar.new()\n"
-"astar.add_point(1, Vector3(0, 0, 0))\n"
-"astar.add_point(2, Vector3(0, 1, 0))\n"
-"astar.add_point(3, Vector3(1, 1, 0))\n"
-"astar.add_point(4, Vector3(2, 0, 0))\n"
-"\n"
-"astar.connect_points(1, 2, true)\n"
-"astar.connect_points(1, 3, true)\n"
-"\n"
-"var neighbors = astar.get_point_connections(1) # Gibt [2, 3] zurück\n"
-"[/codeblock]"
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid "Returns the number of points currently in the points pool."
-msgstr ""
-"Gibt die Anzahl der Punkte zurück, die sich derzeit im Punktepool befinden."
-
-#: doc/classes/AStar.xml
-msgid ""
-"Returns an array with the points that are in the path found by AStar between "
-"the given points. The array is ordered from the starting point to the ending "
-"point of the path.\n"
-"[b]Note:[/b] This method is not thread-safe. If called from a [Thread], it "
-"will return an empty [PoolVector3Array] and will print an error message."
-msgstr ""
-"Gibt ein Array mit den Punkten zurück, die sich auf dem von AStar gefundenen "
-"Pfad zwischen den angegebenen Punkten befinden. Das Array ist vom Startpunkt "
-"bis zum Endpunkt des Pfades geordnet.\n"
-"[b]Hinweis:[/b] Diese Methode ist nicht thread-sicher. Wenn sie von einem "
-"[Thread] aufgerufen wird, gibt sie ein leeres [PoolVector3Array] zurück und "
-"gibt eine Fehlermeldung aus."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Returns the position of the point associated with the given [code]id[/code]."
-msgstr ""
-"Gibt die Position des Punktes zurück, der mit der angegebenen [code]id[/"
-"code] verbunden ist."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Returns the weight scale of the point associated with the given [code]id[/"
-"code]."
-msgstr ""
-"Gibt die Gewichtungsskala des Punktes zurück, der mit der angegebenen "
-"[code]id[/code] verbunden ist."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid "Returns an array of all points."
-msgstr "Gibt ein Array mit allen Punkten zurück."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Returns whether a point associated with the given [code]id[/code] exists."
-msgstr ""
-"Gibt zurück, ob ein Punkt mit der angegebenen [code]id[/code] existiert."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Returns whether a point is disabled or not for pathfinding. By default, all "
-"points are enabled."
-msgstr ""
-"Gibt zurück, ob ein Punkt für die Pfadfindung deaktiviert ist oder nicht. "
-"Standardmäßig sind alle Punkte aktiviert."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Removes the point associated with the given [code]id[/code] from the points "
-"pool."
-msgstr ""
-"Entfernt den mit der angegebenen [code]id[/code] verbundenen Punkt aus dem "
-"Punktepool."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Reserves space internally for [code]num_nodes[/code] points, useful if "
-"you're adding a known large number of points at once, for a grid for "
-"instance. New capacity must be greater or equals to old capacity."
-msgstr ""
-"Reserviert intern Platz für [code]num_nodes[/code] Punkte, was nützlich ist, "
-"wenn Sie eine bekannt große Anzahl von Punkten auf einmal hinzufügen, z. B. "
-"für ein Gitter. Die neue Kapazität muss größer oder gleich der alten "
-"Kapazität sein."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Disables or enables the specified point for pathfinding. Useful for making a "
-"temporary obstacle."
-msgstr ""
-"Deaktiviert oder aktiviert den angegebenen Punkt für die Pfadfindung. "
-"Nützlich für die Erstellung eines temporären Hindernisses."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Sets the [code]position[/code] for the point with the given [code]id[/code]."
-msgstr ""
-"Setzt die [code]Position[/code] für den Punkt mit der angegebenen [code]id[/"
-"code]."
-
-#: doc/classes/AStar.xml doc/classes/AStar2D.xml
-msgid ""
-"Sets the [code]weight_scale[/code] for the point with the given [code]id[/"
-"code]. The [code]weight_scale[/code] is multiplied by the result of [method "
-"_compute_cost] when determining the overall cost of traveling across a "
-"segment from a neighboring point to this point."
-msgstr ""
-"Setzt den [code]weight_scale[/code] für den Punkt mit der angegebenen "
-"[code]id[/code]. Der [code]weight_scale[/code] wird mit dem Ergebnis von "
-"[method _compute_cost] multipliziert, wenn die Gesamtkosten für die Reise "
-"über ein Segment von einem benachbarten Punkt zu diesem Punkt bestimmt "
-"werden."
-
-#: doc/classes/AStar2D.xml
-msgid "AStar class representation that uses 2D vectors as edges."
-msgstr "AStar-Klassendarstellung, die 2D-Vektoren als Kanten verwendet."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"This is a wrapper for the [AStar] class which uses 2D vectors instead of 3D "
-"vectors."
-msgstr ""
-"Dies ist ein Wrapper für die Klasse [AStar], die 2D-Vektoren anstelle von 3D-"
-"Vektoren verwendet."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Called when computing the cost between two connected points.\n"
-"Note that this function is hidden in the default [code]AStar2D[/code] class."
-msgstr ""
-"Wird aufgerufen, wenn die Kosten zwischen zwei verbundenen Punkten berechnet "
-"werden.\n"
-"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar2D[/code] "
-"verborgen ist."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Called when estimating the cost between a point and the path's ending "
-"point.\n"
-"Note that this function is hidden in the default [code]AStar2D[/code] class."
-msgstr ""
-"Wird aufgerufen, wenn die Kosten zwischen einem Punkt und dem Endpunkt des "
-"Pfades geschätzt werden.\n"
-"Beachten Sie, dass diese Funktion in der Standardklasse [code]AStar2D[/code] "
-"verborgen ist."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Adds a new point at the given position with the given identifier. The "
-"[code]id[/code] must be 0 or larger, and the [code]weight_scale[/code] must "
-"be 0.0 or greater.\n"
-"The [code]weight_scale[/code] is multiplied by the result of [method "
-"_compute_cost] when determining the overall cost of traveling across a "
-"segment from a neighboring point to this point. Thus, all else being equal, "
-"the algorithm prefers points with lower [code]weight_scale[/code]s to form a "
-"path.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(1, 0), 4) # Adds the point (1, 0) with "
-"weight_scale 4 and id 1\n"
-"[/codeblock]\n"
-"If there already exists a point for the given [code]id[/code], its position "
-"and weight scale are updated to the given values."
-msgstr ""
-"Fügt einen neuen Punkt an der angegebenen Position mit dem angegebenen "
-"Bezeichner hinzu. Die [code]id[/code] muss 0 oder größer sein, und die "
-"[code]weight_scale[/code] muss 0,0 oder größer sein.\n"
-"Der [code]weight_scale[/code] wird mit dem Ergebnis von [method "
-"_compute_cost] multipliziert, um die Gesamtkosten der Reise über ein Segment "
-"von einem benachbarten Punkt zu diesem Punkt zu ermitteln. Unter sonst "
-"gleichen Bedingungen bevorzugt der Algorithmus also Punkte mit niedrigeren "
-"[code]weight_scale[/code]s, um einen Pfad zu bilden.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(1, 0), 4) # Fügt den Punkt (1, 0) mit "
-"weight_scale 4 und id 1 hinzu\n"
-"[/codeblock]\n"
-"Wenn für die angegebene [code]id[/code] bereits ein Punkt existiert, werden "
-"dessen Position und Gewichtungsskala auf die angegebenen Werte aktualisiert."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Returns whether there is a connection/segment between the given points. If "
-"[code]bidirectional[/code] is [code]false[/code], returns whether movement "
-"from [code]id[/code] to [code]to_id[/code] is possible through this segment."
-msgstr ""
-"Gibt zurück, ob es eine Verbindung/ein Segment zwischen den angegebenen "
-"Punkten gibt. Wenn [code]bidirectional[/code] [code]false[/code] ist, wird "
-"zurückgegeben, ob eine Bewegung von [code]id[/code] nach [code]to_id[/code] "
-"durch dieses Segment möglich ist."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Creates a segment between the given points. If [code]bidirectional[/code] is "
-"[code]false[/code], only movement from [code]id[/code] to [code]to_id[/code] "
-"is allowed, not the reverse direction.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(1, 1))\n"
-"astar.add_point(2, Vector2(0, 5))\n"
-"astar.connect_points(1, 2, false)\n"
-"[/codeblock]"
-msgstr ""
-"Erzeugt ein Segment zwischen den angegebenen Punkten. Wenn "
-"[code]bidirectional[/code] [code]false[/code] ist, ist nur die Bewegung von "
-"[code]id[/code] nach [code]to_id[/code] erlaubt, nicht die umgekehrte "
-"Richtung.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(1, 1))\n"
-"astar.add_point(2, Vector2(0, 5))\n"
-"astar.connect_points(1, 2, false)\n"
-"[/codeblock]"
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Returns the closest position to [code]to_position[/code] that resides inside "
-"a segment between two connected points.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(0, 0))\n"
-"astar.add_point(2, Vector2(0, 5))\n"
-"astar.connect_points(1, 2)\n"
-"var res = astar.get_closest_position_in_segment(Vector2(3, 3)) # Returns (0, "
-"3)\n"
-"[/codeblock]\n"
-"The result is in the segment that goes from [code]y = 0[/code] to [code]y = "
-"5[/code]. It's the closest position in the segment to the given point."
-msgstr ""
-"Gibt die nächstgelegene Position zu [code]to_position[/code] zurück, die "
-"sich innerhalb eines Segments zwischen zwei verbundenen Punkten befindet.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(0, 0))\n"
-"astar.add_point(2, Vector2(0, 5))\n"
-"astar.connect_points(1, 2)\n"
-"var res = astar.get_closest_position_in_segment(Vector2(3, 3)) # Gibt (0, 3) "
-"zurück\n"
-"[/codeblock]\n"
-"Das Ergebnis liegt in dem Segment, das von [code]y = 0[/code] bis [code]y = "
-"5[/code] reicht. Es ist die Position im Segment, die dem angegebenen Punkt "
-"am nächsten liegt."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Returns an array with the IDs of the points that form the path found by "
-"AStar2D between the given points. The array is ordered from the starting "
-"point to the ending point of the path.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(0, 0))\n"
-"astar.add_point(2, Vector2(0, 1), 1) # Default weight is 1\n"
-"astar.add_point(3, Vector2(1, 1))\n"
-"astar.add_point(4, Vector2(2, 0))\n"
-"\n"
-"astar.connect_points(1, 2, false)\n"
-"astar.connect_points(2, 3, false)\n"
-"astar.connect_points(4, 3, false)\n"
-"astar.connect_points(1, 4, false)\n"
-"\n"
-"var res = astar.get_id_path(1, 3) # Returns [1, 2, 3]\n"
-"[/codeblock]\n"
-"If you change the 2nd point's weight to 3, then the result will be [code][1, "
-"4, 3][/code] instead, because now even though the distance is longer, it's "
-"\"easier\" to get through point 4 than through point 2."
-msgstr ""
-"Gibt ein Array mit den IDs der Punkte zurück, die den von AStar2D gefundenen "
-"Pfad zwischen den angegebenen Punkten bilden. Das Array ist vom Startpunkt "
-"bis zum Endpunkt des Pfades geordnet.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(0, 0))\n"
-"astar.add_point(2, Vector2(0, 1), 1) # Standartgewichtung ist 1\n"
-"astar.add_point(3, Vector2(1, 1))\n"
-"astar.add_point(4, Vector2(2, 0))\n"
-"\n"
-"astar.connect_points(1, 2, false)\n"
-"astar.connect_points(2, 3, false)\n"
-"astar.connect_points(4, 3, false)\n"
-"astar.connect_points(1, 4, false)\n"
-"\n"
-"var res = astar.get_id_path(1, 3) # Gibt [1, 2, 3] zurück\n"
-"[/codeblock]\n"
-"Wenn du die Gewichtung des 2. Punktes auf 3 änderst, wird das Ergebnis "
-"stattdessen [code][1, 4, 3][/code] sein, weil es jetzt, obwohl die Strecke "
-"länger ist, \"einfacher\" ist, durch Punkt 4 zu kommen als durch Punkt 2."
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Returns an array with the IDs of the points that form the connection with "
-"the given point.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(0, 0))\n"
-"astar.add_point(2, Vector2(0, 1))\n"
-"astar.add_point(3, Vector2(1, 1))\n"
-"astar.add_point(4, Vector2(2, 0))\n"
-"\n"
-"astar.connect_points(1, 2, true)\n"
-"astar.connect_points(1, 3, true)\n"
-"\n"
-"var neighbors = astar.get_point_connections(1) # Returns [2, 3]\n"
-"[/codeblock]"
-msgstr ""
-"Gibt ein Array mit den IDs der Punkte zurück, die die Verbindung mit dem "
-"angegebenen Punkt bilden.\n"
-"[codeblock]\n"
-"var astar = AStar2D.new()\n"
-"astar.add_point(1, Vector2(0, 0))\n"
-"astar.add_point(2, Vector2(0, 1))\n"
-"astar.add_point(3, Vector2(1, 1))\n"
-"astar.add_point(4, Vector2(2, 0))\n"
-"\n"
-"astar.connect_points(1, 2, true)\n"
-"astar.connect_points(1, 3, true)\n"
-"\n"
-"var neighbors = astar.get_point_connections(1) # Gibt [2, 3] zurück\n"
-"[/codeblock]"
-
-#: doc/classes/AStar2D.xml
-msgid ""
-"Returns an array with the points that are in the path found by AStar2D "
-"between the given points. The array is ordered from the starting point to "
-"the ending point of the path.\n"
-"[b]Note:[/b] This method is not thread-safe. If called from a [Thread], it "
-"will return an empty [PoolVector2Array] and will print an error message."
-msgstr ""
-"Gibt ein Array mit den Punkten zurück, die sich auf dem von AStar2D "
-"gefundenen Pfad zwischen den angegebenen Punkten befinden. Das Array ist vom "
-"Startpunkt bis zum Endpunkt des Pfades geordnet.\n"
-"[b]Hinweis:[/b] Diese Methode ist nicht thread-sicher. Wenn sie von einem "
-"[Thread] aufgerufen wird, gibt sie ein leeres [PoolVector2Array] zurück und "
-"gibt eine Fehlermeldung aus."
-
-#: doc/classes/AtlasTexture.xml
-msgid ""
-"Crops out one part of a texture, such as a texture from a texture atlas."
-msgstr ""
-"Schneidet einen Teil einer Textur aus, z. B. eine Textur aus einem "
-"Texturatlas."
-
-#: doc/classes/AtlasTexture.xml
-msgid ""
-"[Texture] resource that crops out one part of the [member atlas] texture, "
-"defined by [member region]. The main use case is cropping out textures from "
-"a texture atlas, which is a big texture file that packs multiple smaller "
-"textures. Consists of a [Texture] for the [member atlas], a [member region] "
-"that defines the area of [member atlas] to use, and a [member margin] that "
-"defines the border width.\n"
-"[AtlasTexture] cannot be used in an [AnimatedTexture], cannot be tiled in "
-"nodes such as [TextureRect], and does not work properly if used inside of "
-"other [AtlasTexture] resources. Multiple [AtlasTexture] resources can be "
-"used to crop multiple textures from the atlas. Using a texture atlas helps "
-"to optimize video memory costs and render calls compared to using multiple "
-"small files.\n"
-"[b]Note:[/b] AtlasTextures don't support repetition. The [constant Texture."
-"FLAG_REPEAT] and [constant Texture.FLAG_MIRRORED_REPEAT] flags are ignored "
-"when using an AtlasTexture."
-msgstr ""
-"Ressource [Texture], die einen Teil der Textur [member atlas], definiert "
-"durch [member region], ausschneidet. Der Hauptanwendungsfall ist das "
-"Ausschneiden von Texturen aus einem Textur-Atlas, der eine große Texturdatei "
-"ist, die mehrere kleinere Texturen enthält. Besteht aus einer [Texture] für "
-"den [member atlas], einer [member region], die den zu verwendenden Bereich "
-"des [member atlas] definiert, und einem [member margin], der die Randbreite "
-"definiert.\n"
-"[AtlasTexture] kann nicht in einer [AnimatedTexture] verwendet werden, kann "
-"nicht in Knoten wie [TextureRect] gekachelt werden und funktioniert nicht "
-"ordnungsgemäß, wenn sie innerhalb von anderen [AtlasTexture]-Ressourcen "
-"verwendet wird. Mehrere [AtlasTexture]-Ressourcen können verwendet werden, "
-"um mehrere Texturen aus dem Atlas zu schneiden. Die Verwendung eines "
-"Texturatlasses hilft, die Videospeicherkosten und Renderaufrufe im Vergleich "
-"zur Verwendung mehrerer kleiner Dateien zu optimieren.\n"
-"[b]Hinweis:[/b] AtlasTexturen unterstützen keine Wiederholungen. Die Flags "
-"[constant Texture.FLAG_REPEAT] und [constant Texture.FLAG_MIRRORED_REPEAT] "
-"werden bei der Verwendung einer AtlasTextur ignoriert."
-
-#: doc/classes/AtlasTexture.xml
-msgid "The texture that contains the atlas. Can be any [Texture] subtype."
-msgstr ""
-"Die Textur, die den Atlas enthält. Kann ein beliebiger [Texture]-Subtyp sein."
-
-#: doc/classes/AtlasTexture.xml
-msgid ""
-"If [code]true[/code], clips the area outside of the region to avoid bleeding "
-"of the surrounding texture pixels."
-msgstr ""
-"Wenn [code]true[/code], wird der Bereich außerhalb der Region abgeschnitten, "
-"um ein Ausbluten der umliegenden Texturpixel zu vermeiden."
-
-#: doc/classes/AtlasTexture.xml
-msgid ""
-"The margin around the region. The [Rect2]'s [member Rect2.size] parameter "
-"(\"w\" and \"h\" in the editor) resizes the texture so it fits within the "
-"margin."
-msgstr ""
-"Der Rand um die Region. Der Parameter [member Rect2.size] von [Rect2] (\"w\" "
-"und \"h\" im Editor) ändert die Größe der Textur so, dass sie in den Rand "
-"passt."
-
-#: doc/classes/AtlasTexture.xml
-msgid "The AtlasTexture's used region."
-msgstr "Die verwendete Region der AtlasTextur."
-
-#: doc/classes/AudioBusLayout.xml
-msgid "Stores information about the audio buses."
-msgstr "Speichert Informationen über die Audiobusse."
-
-#: doc/classes/AudioBusLayout.xml
-msgid ""
-"Stores position, muting, solo, bypass, effects, effect position, volume, and "
-"the connections between buses. See [AudioServer] for usage."
-msgstr ""
-"Speichert Position, Stummschaltung, Solo, Bypass, Effekte, Effektposition, "
-"Lautstärke und die Verbindungen zwischen Bussen. Siehe [AudioServer] für die "
-"Verwendung."
-
-#: doc/classes/AudioEffect.xml
-msgid "Audio effect for audio."
-msgstr "Audioeffekt für Audio."
-
-#: doc/classes/AudioEffect.xml
-msgid ""
-"Base resource for audio bus. Applies an audio effect on the bus that the "
-"resource is applied on."
-msgstr ""
-"Basisressource für Audiobus. Wendet einen Audioeffekt auf den Bus an, auf "
-"den die Ressource angewendet wird."
-
-#: doc/classes/AudioEffect.xml doc/classes/AudioEffectCapture.xml
-#: doc/classes/AudioEffectRecord.xml doc/classes/AudioServer.xml
-#: doc/classes/AudioStream.xml doc/classes/AudioStreamMicrophone.xml
-#: doc/classes/AudioStreamPlayer.xml
-msgid "Audio Mic Record Demo"
-msgstr "Audio Mic Record Demo"
-
-#: doc/classes/AudioEffectAmplify.xml
-msgid ""
-"Adds an amplifying audio effect to an audio bus.\n"
-"Increases or decreases the volume of the selected audio bus."
-msgstr ""
-"Fügt einen verstärkenden Audioeffekt zu einem Audiobus hinzu.\n"
-"Erhöht oder verringert die Lautstärke des ausgewählten Audiobusses."
-
-#: doc/classes/AudioEffectAmplify.xml
-msgid "Increases or decreases the volume being routed through the audio bus."
-msgstr "Erhöht oder verringert die über den Audiobus geleitete Lautstärke."
-
-#: doc/classes/AudioEffectAmplify.xml
-msgid ""
-"Amount of amplification in decibels. Positive values make the sound louder, "
-"negative values make it quieter. Value can range from -80 to 24."
-msgstr ""
-"Betrag der Verstärkung in Dezibel. Positive Werte machen den Ton lauter, "
-"negative Werte machen ihn leiser. Der Wert kann von -80 bis 24 reichen."
-
-#: doc/classes/AudioEffectBandLimitFilter.xml
-msgid "Adds a band limit filter to the audio bus."
-msgstr "Fügt dem Audiobus einen Bandbegrenzungsfilter hinzu."
-
-#: doc/classes/AudioEffectBandLimitFilter.xml
-msgid ""
-"Limits the frequencies in a range around the [member AudioEffectFilter."
-"cutoff_hz] and allows frequencies outside of this range to pass."
-msgstr ""
-"Begrenzt die Frequenzen in einem Bereich um den [member AudioEffectFilter."
-"cutoff_hz] und lässt Frequenzen außerhalb dieses Bereichs passieren."
-
-#: doc/classes/AudioEffectBandPassFilter.xml
-msgid "Adds a band pass filter to the audio bus."
-msgstr "Fügt dem Audiobus einen Bandpassfilter hinzu."
-
-#: doc/classes/AudioEffectBandPassFilter.xml
-msgid ""
-"Attenuates the frequencies inside of a range around the [member "
-"AudioEffectFilter.cutoff_hz] and cuts frequencies outside of this band."
-msgstr ""
-"Dämpft die Frequenzen innerhalb eines Bereichs um den [member "
-"AudioEffectFilter.cutoff_hz] und schneidet Frequenzen außerhalb dieses "
-"Bereichs ab."
-
-#: doc/classes/AudioEffectCapture.xml
-msgid "Captures audio from an audio bus in real-time."
-msgstr "Nimmt Audio von einem Audiobus in Echtzeit auf."
-
-#: doc/classes/AudioEffectCapture.xml
-#, fuzzy
-msgid ""
-"AudioEffectCapture is an AudioEffect which copies all audio frames from the "
-"attached audio effect bus into its internal ring buffer.\n"
-"Application code should consume these audio frames from this ring buffer "
-"using [method get_buffer] and process it as needed, for example to capture "
-"data from an [AudioStreamMicrophone], implement application-defined effects, "
-"or to transmit audio over the network. When capturing audio data from a "
-"microphone, the format of the samples will be stereo 32-bit floating point "
-"PCM.\n"
-"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
-"[code]true[/code] for audio input to work. See also that setting's "
-"description for caveats related to permissions and operating system privacy "
-"settings."
-msgstr ""
-"AudioEffectCapture ist ein AudioEffect, der alle Audio-Frames vom "
-"angeschlossenen Audio-Effekt-Bus in seinen internen Ringpuffer kopiert.\n"
-"Der Anwendungscode sollte diese Audioframes aus diesem Ringpuffer mit der "
-"[method get_buffer] abrufen und nach Bedarf verarbeiten, z.B. um Daten von "
-"einem Mikrofon zu erfassen, anwendungsdefinierte Effekte zu implementieren "
-"oder um Audio über das Netzwerk zu übertragen. Wenn Audiodaten von einem "
-"Mikrofon aufgenommen werden, ist das Format der Samples Stereo 32-Bit "
-"Floating Point PCM."
-
-#: doc/classes/AudioEffectCapture.xml doc/classes/AudioEffectDistortion.xml
-#: doc/classes/AudioEffectFilter.xml doc/classes/AudioEffectHighShelfFilter.xml
-#: doc/classes/AudioEffectLowShelfFilter.xml doc/classes/AudioServer.xml
-msgid "Audio buses"
-msgstr ""
-
-#: doc/classes/AudioEffectCapture.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if at least [code]frames[/code] audio frames are "
-"available to read in the internal ring buffer."
-msgstr ""
-"Liefert [code]wahr[/code] als Ergebnis wenn [code]a[/code] und [code]b[/"
-"code] ungefähr gleich sind."
-
-#: doc/classes/AudioEffectCapture.xml
-msgid "Clears the internal ring buffer."
-msgstr "Löscht den internen Ringspeicher."
-
-#: doc/classes/AudioEffectCapture.xml
-msgid ""
-"Gets the next [code]frames[/code] audio samples from the internal ring "
-"buffer.\n"
-"Returns a [PoolVector2Array] containing exactly [code]frames[/code] audio "
-"samples if available, or an empty [PoolVector2Array] if insufficient data "
-"was available."
-msgstr ""
-"Ruft die nächsten [code]frames[/code] Audio-Samples aus dem internen "
-"Ringpuffer ab.\n"
-"Gibt ein [PoolVector2Array] zurück, das genau [code]frames[/code] Audio-"
-"Samples enthält, falls verfügbar, oder ein leeres [PoolVector2Array], falls "
-"nicht genügend Daten verfügbar waren."
-
-#: doc/classes/AudioEffectCapture.xml
-#, fuzzy
-msgid "Returns the total size of the internal ring buffer in frames."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/AudioEffectCapture.xml
-msgid ""
-"Returns the number of audio frames discarded from the audio bus due to full "
-"buffer."
-msgstr ""
-"Gibt die Anzahl der Audioframes zurück, die aufgrund eines vollen Puffers "
-"vom Audiobus verworfen wurden."
-
-#: doc/classes/AudioEffectCapture.xml
-msgid ""
-"Returns the number of frames available to read using [method get_buffer]."
-msgstr ""
-"Gibt die Anzahl der Bilder zurück, die mit der [methodget_buffer] gelesen "
-"werden können."
-
-#: doc/classes/AudioEffectCapture.xml
-#, fuzzy
-msgid "Returns the number of audio frames inserted from the audio bus."
-msgstr "Gibt die Anzahl der Punkte auf der Blend-Achse zurück."
-
-#: doc/classes/AudioEffectCapture.xml
-msgid ""
-"Length of the internal ring buffer, in seconds. Setting the buffer length "
-"will have no effect if already initialized."
-msgstr ""
-"Länge des internen Ringpuffers, in Sekunden. Die Einstellung der Pufferlänge "
-"hat keine Auswirkungen, wenn sie bereits initialisiert ist."
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "Adds a chorus audio effect."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid ""
-"Adds a chorus audio effect. The effect applies a filter with voices to "
-"duplicate the audio source and manipulate it through the filter."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The effect's raw signal."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The voice's cutoff frequency."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The voice's signal delay."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The voice filter's depth."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The voice's volume."
-msgstr "Die Lautstärke der Stimme."
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The voice's pan level."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The voice's filter rate."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The amount of voices in the effect."
-msgstr ""
-
-#: doc/classes/AudioEffectChorus.xml
-msgid "The effect's processed signal."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"Adds a compressor audio effect to an audio bus.\n"
-"Reduces sounds that exceed a certain threshold level, smooths out the "
-"dynamics and increases the overall volume."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"Dynamic range compressor reduces the level of the sound when the amplitude "
-"goes over a certain threshold in Decibels. One of the main uses of a "
-"compressor is to increase the dynamic range by clipping as little as "
-"possible (when sound goes over 0dB).\n"
-"Compressor has many uses in the mix:\n"
-"- In the Master bus to compress the whole output (although an "
-"[AudioEffectLimiter] is probably better).\n"
-"- In voice channels to ensure they sound as balanced as possible.\n"
-"- Sidechained. This can reduce the sound level sidechained with another "
-"audio bus for threshold detection. This technique is common in video game "
-"mixing to the level of music and SFX while voices are being heard.\n"
-"- Accentuates transients by using a wider attack, making effects sound more "
-"punchy."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"Compressor's reaction time when the signal exceeds the threshold, in "
-"microseconds. Value can range from 20 to 2000."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid "Gain applied to the output signal."
-msgstr "Auf das Ausgangssignal angewendete Verstärkung."
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"Balance between original signal and effect signal. Value can range from 0 "
-"(totally dry) to 1 (totally wet)."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"Amount of compression applied to the audio once it passes the threshold "
-"level. The higher the ratio, the more the loud parts of the audio will be "
-"compressed. Value can range from 1 to 48."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"Compressor's delay time to stop reducing the signal after the signal level "
-"falls below the threshold, in milliseconds. Value can range from 20 to 2000."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid "Reduce the sound level using another audio bus for threshold detection."
-msgstr ""
-
-#: doc/classes/AudioEffectCompressor.xml
-msgid ""
-"The level above which compression is applied to the audio. Value can range "
-"from -60 to 0."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid ""
-"Adds a delay audio effect to an audio bus. Plays input signal back after a "
-"period of time.\n"
-"Two tap delay and feedback options."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid ""
-"Plays input signal back after a period of time. The delayed signal may be "
-"played back multiple times to create the sound of a repeating, decaying "
-"echo. Delay effects range from a subtle echo effect to a pronounced blending "
-"of previous sounds with new sounds."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid ""
-"Output percent of original sound. At 0, only delayed sounds are output. "
-"Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "If [code]true[/code], feedback is enabled."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "Feedback delay time in milliseconds."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "Sound level for [code]tap1[/code]."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid ""
-"Low-pass filter for feedback, in Hz. Frequencies below this value are "
-"filtered out of the source signal."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "If [code]true[/code], [code]tap1[/code] will be enabled."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "[code]tap1[/code] delay time in milliseconds."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid ""
-"Pan position for [code]tap1[/code]. Value can range from -1 (fully left) to "
-"1 (fully right)."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "If [code]true[/code], [code]tap2[/code] will be enabled."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "[b]Tap2[/b] delay time in milliseconds."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid "Sound level for [code]tap2[/code]."
-msgstr ""
-
-#: doc/classes/AudioEffectDelay.xml
-msgid ""
-"Pan position for [code]tap2[/code]. Value can range from -1 (fully left) to "
-"1 (fully right)."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Adds a distortion audio effect to an Audio bus.\n"
-"Modify the sound to make it distorted."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Different types are available: clip, tan, lo-fi (bit crushing), overdrive, "
-"or waveshape.\n"
-"By distorting the waveform the frequency content change, which will often "
-"make the sound \"crunchy\" or \"abrasive\". For games, it can simulate sound "
-"coming from some saturated device or speaker very efficiently."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid "Distortion power. Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"High-pass filter, in Hz. Frequencies higher than this value will not be "
-"affected by the distortion. Value can range from 1 to 20000."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid "Distortion type."
-msgstr "Verzerrungstyp."
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Increases or decreases the volume after the effect. Value can range from -80 "
-"to 24."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Increases or decreases the volume before the effect. Value can range from "
-"-60 to 60."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Digital distortion effect which cuts off peaks at the top and bottom of the "
-"waveform."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Low-resolution digital distortion effect. You can use it to emulate the "
-"sound of early digital audio devices."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Emulates the warm distortion produced by a field effect transistor, which is "
-"commonly used in solid-state musical instrument amplifiers."
-msgstr ""
-
-#: doc/classes/AudioEffectDistortion.xml
-msgid ""
-"Waveshaper distortions are used mainly by electronic musicians to achieve an "
-"extra-abrasive sound."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ.xml
-msgid ""
-"Base class for audio equalizers. Gives you control over frequencies.\n"
-"Use it to create a custom equalizer if [AudioEffectEQ6], [AudioEffectEQ10] "
-"or [AudioEffectEQ21] don't fit your needs."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ.xml
-msgid ""
-"AudioEffectEQ gives you control over frequencies. Use it to compensate for "
-"existing deficiencies in audio. AudioEffectEQs are useful on the Master bus "
-"to completely master a mix and give it more character. They are also useful "
-"when a game is run on a mobile device, to adjust the mix to that kind of "
-"speakers (it can be added but disabled when headphones are plugged)."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ.xml
-msgid "Returns the number of bands of the equalizer."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ.xml
-msgid "Returns the band's gain at the specified index, in dB."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ.xml
-msgid "Sets band's gain at the specified index, in dB."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ10.xml
-msgid ""
-"Adds a 10-band equalizer audio effect to an Audio bus. Gives you control "
-"over frequencies from 31 Hz to 16000 Hz.\n"
-"Each frequency can be modulated between -60/+24 dB."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ10.xml
-msgid ""
-"Frequency bands:\n"
-"Band 1: 31 Hz\n"
-"Band 2: 62 Hz\n"
-"Band 3: 125 Hz\n"
-"Band 4: 250 Hz\n"
-"Band 5: 500 Hz\n"
-"Band 6: 1000 Hz\n"
-"Band 7: 2000 Hz\n"
-"Band 8: 4000 Hz\n"
-"Band 9: 8000 Hz\n"
-"Band 10: 16000 Hz\n"
-"See also [AudioEffectEQ], [AudioEffectEQ6], [AudioEffectEQ21]."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ21.xml
-msgid ""
-"Adds a 21-band equalizer audio effect to an Audio bus. Gives you control "
-"over frequencies from 22 Hz to 22000 Hz.\n"
-"Each frequency can be modulated between -60/+24 dB."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ21.xml
-msgid ""
-"Frequency bands:\n"
-"Band 1: 22 Hz\n"
-"Band 2: 32 Hz\n"
-"Band 3: 44 Hz\n"
-"Band 4: 63 Hz\n"
-"Band 5: 90 Hz\n"
-"Band 6: 125 Hz\n"
-"Band 7: 175 Hz\n"
-"Band 8: 250 Hz\n"
-"Band 9: 350 Hz\n"
-"Band 10: 500 Hz\n"
-"Band 11: 700 Hz\n"
-"Band 12: 1000 Hz\n"
-"Band 13: 1400 Hz\n"
-"Band 14: 2000 Hz\n"
-"Band 15: 2800 Hz\n"
-"Band 16: 4000 Hz\n"
-"Band 17: 5600 Hz\n"
-"Band 18: 8000 Hz\n"
-"Band 19: 11000 Hz\n"
-"Band 20: 16000 Hz\n"
-"Band 21: 22000 Hz\n"
-"See also [AudioEffectEQ], [AudioEffectEQ6], [AudioEffectEQ10]."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ6.xml
-msgid ""
-"Adds a 6-band equalizer audio effect to an Audio bus. Gives you control over "
-"frequencies from 32 Hz to 10000 Hz.\n"
-"Each frequency can be modulated between -60/+24 dB."
-msgstr ""
-
-#: doc/classes/AudioEffectEQ6.xml
-msgid ""
-"Frequency bands:\n"
-"Band 1: 32 Hz\n"
-"Band 2: 100 Hz\n"
-"Band 3: 320 Hz\n"
-"Band 4: 1000 Hz\n"
-"Band 5: 3200 Hz\n"
-"Band 6: 10000 Hz\n"
-"See also [AudioEffectEQ], [AudioEffectEQ10], [AudioEffectEQ21]."
-msgstr ""
-
-#: doc/classes/AudioEffectFilter.xml
-msgid "Adds a filter to the audio bus."
-msgstr ""
-
-#: doc/classes/AudioEffectFilter.xml
-msgid "Allows frequencies other than the [member cutoff_hz] to pass."
-msgstr "Lässt andere Frequenzen als den [member cutoff_hz] passieren."
-
-#: doc/classes/AudioEffectFilter.xml
-msgid "Threshold frequency for the filter, in Hz."
-msgstr "Schwellenfrequenz für den Filter, in Hz."
-
-#: doc/classes/AudioEffectFilter.xml
-msgid "Gain amount of the frequencies after the filter."
-msgstr "Verstärkungsgrad der Frequenzen nach dem Filter."
-
-#: doc/classes/AudioEffectFilter.xml
-msgid "Amount of boost in the frequency range near the cutoff frequency."
-msgstr ""
-
-#: doc/classes/AudioEffectHighPassFilter.xml
-msgid "Adds a high-pass filter to the Audio Bus."
-msgstr "Fügt dem Audiobus einen Hochpassfilter hinzu."
-
-#: doc/classes/AudioEffectHighPassFilter.xml
-msgid ""
-"Cuts frequencies lower than the [member AudioEffectFilter.cutoff_hz] and "
-"allows higher frequencies to pass."
-msgstr ""
-
-#: doc/classes/AudioEffectHighShelfFilter.xml
-msgid "Reduces all frequencies above the [member AudioEffectFilter.cutoff_hz]."
-msgstr ""
-
-#: doc/classes/AudioEffectLimiter.xml
-msgid "Adds a soft-clip limiter audio effect to an Audio bus."
-msgstr ""
-
-#: doc/classes/AudioEffectLimiter.xml
-msgid ""
-"A limiter is similar to a compressor, but it's less flexible and designed to "
-"disallow sound going over a given dB threshold. Adding one in the Master bus "
-"is always recommended to reduce the effects of clipping.\n"
-"Soft clipping starts to reduce the peaks a little below the threshold level "
-"and progressively increases its effect as the input level increases such "
-"that the threshold is never exceeded."
-msgstr ""
-
-#: doc/classes/AudioEffectLimiter.xml
-msgid ""
-"The waveform's maximum allowed value, in decibels. Value can range from -20 "
-"to -0.1."
-msgstr ""
-
-#: doc/classes/AudioEffectLimiter.xml
-msgid ""
-"Applies a gain to the limited waves, in decibels. Value can range from 0 to "
-"6."
-msgstr ""
-
-#: doc/classes/AudioEffectLimiter.xml
-msgid ""
-"Threshold from which the limiter begins to be active, in decibels. Value can "
-"range from -30 to 0."
-msgstr ""
-
-#: doc/classes/AudioEffectLowPassFilter.xml
-msgid "Adds a low-pass filter to the Audio bus."
-msgstr ""
-
-#: doc/classes/AudioEffectLowPassFilter.xml
-msgid ""
-"Cuts frequencies higher than the [member AudioEffectFilter.cutoff_hz] and "
-"allows lower frequencies to pass."
-msgstr ""
-
-#: doc/classes/AudioEffectLowShelfFilter.xml
-msgid "Reduces all frequencies below the [member AudioEffectFilter.cutoff_hz]."
-msgstr ""
-
-#: doc/classes/AudioEffectNotchFilter.xml
-msgid "Adds a notch filter to the Audio bus."
-msgstr ""
-
-#: doc/classes/AudioEffectNotchFilter.xml
-msgid ""
-"Attenuates frequencies in a narrow band around the [member AudioEffectFilter."
-"cutoff_hz] and cuts frequencies outside of this range."
-msgstr ""
-
-#: doc/classes/AudioEffectPanner.xml
-msgid "Adds a panner audio effect to an Audio bus. Pans sound left or right."
-msgstr ""
-
-#: doc/classes/AudioEffectPanner.xml
-msgid ""
-"Determines how much of an audio signal is sent to the left and right buses."
-msgstr ""
-
-#: doc/classes/AudioEffectPanner.xml
-msgid "Pan position. Value can range from -1 (fully left) to 1 (fully right)."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid ""
-"Adds a phaser audio effect to an Audio bus.\n"
-"Combines the original signal with a copy that is slightly out of phase with "
-"the original."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid ""
-"Combines phase-shifted signals with the original signal. The movement of the "
-"phase-shifted signals is controlled using a low-frequency oscillator."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid ""
-"Governs how high the filter frequencies sweep. Low value will primarily "
-"affect bass frequencies. High value can sweep high into the treble. Value "
-"can range from 0.1 to 4."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid "Output percent of modified sound. Value can range from 0.1 to 0.9."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid ""
-"Determines the maximum frequency affected by the LFO modulations, in Hz. "
-"Value can range from 10 to 10000."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid ""
-"Determines the minimum frequency affected by the LFO modulations, in Hz. "
-"Value can range from 10 to 10000."
-msgstr ""
-
-#: doc/classes/AudioEffectPhaser.xml
-msgid ""
-"Adjusts the rate in Hz at which the effect sweeps up and down across the "
-"frequency range."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-msgid ""
-"Adds a pitch-shifting audio effect to an Audio bus.\n"
-"Raises or lowers the pitch of original sound."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-msgid ""
-"Allows modulation of pitch independently of tempo. All frequencies can be "
-"increased/decreased with minimal effect on transients."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-msgid ""
-"The size of the [url=https://en.wikipedia.org/wiki/"
-"Fast_Fourier_transform]Fast Fourier transform[/url] buffer. Higher values "
-"smooth out the effect over time, but have greater latency. The effects of "
-"this higher latency are especially noticeable on sounds that have sudden "
-"amplitude changes."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-msgid ""
-"The oversampling factor to use. Higher values result in better quality, but "
-"are more demanding on the CPU and may cause audio cracking if the CPU can't "
-"keep up."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-msgid ""
-"The pitch scale to use. [code]1.0[/code] is the default pitch and plays "
-"sounds unaltered. [member pitch_scale] can range from [code]0.0[/code] "
-"(infinitely low pitch, inaudible) to [code]16[/code] (16 times higher than "
-"the initial pitch)."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"Use a buffer of 256 samples for the Fast Fourier transform. Lowest latency, "
-"but least stable over time."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"Use a buffer of 512 samples for the Fast Fourier transform. Low latency, but "
-"less stable over time."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"Use a buffer of 1024 samples for the Fast Fourier transform. This is a "
-"compromise between latency and stability over time."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"Use a buffer of 2048 samples for the Fast Fourier transform. High latency, "
-"but stable over time."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"Use a buffer of 4096 samples for the Fast Fourier transform. Highest "
-"latency, but most stable over time."
-msgstr ""
-
-#: doc/classes/AudioEffectPitchShift.xml
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid "Represents the size of the [enum FFT_Size] enum."
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid "Audio effect used for recording the sound from an audio bus."
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid ""
-"Allows the user to record the sound from an audio bus. This can include all "
-"audio output by Godot when used on the \"Master\" audio bus.\n"
-"Can be used (with an [AudioStreamMicrophone]) to record from a microphone.\n"
-"It sets and gets the format in which the audio file will be recorded (8-bit, "
-"16-bit, or compressed). It checks whether or not the recording is active, "
-"and if it is, records the sound. It then returns the recorded sample."
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid "Recording with microphone"
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid "Returns the recorded sample."
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid "Returns whether the recording is active or not."
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid ""
-"If [code]true[/code], the sound will be recorded. Note that restarting the "
-"recording will remove the previously recorded sample."
-msgstr ""
-
-#: doc/classes/AudioEffectRecord.xml
-msgid ""
-"Specifies the format in which the sample will be recorded. See [enum "
-"AudioStreamSample.Format] for available formats."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Adds a reverberation audio effect to an Audio bus.\n"
-"Simulates the sound of acoustic environments such as rooms, concert halls, "
-"caverns, or an open spaces."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Simulates rooms of different sizes. Its parameters can be adjusted to "
-"simulate the sound of a specific room."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Defines how reflective the imaginary room's walls are. Value can range from "
-"0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Output percent of original sound. At 0, only modified sound is outputted. "
-"Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"High-pass filter passes signals with a frequency higher than a certain "
-"cutoff frequency and attenuates signals with frequencies lower than the "
-"cutoff frequency. Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid "Output percent of predelay. Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Time between the original signal and the early reflections of the reverb "
-"signal, in milliseconds."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Dimensions of simulated room. Bigger means more echoes. Value can range from "
-"0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Widens or narrows the stereo image of the reverb tail. 1 means fully widens. "
-"Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectReverb.xml
-msgid ""
-"Output percent of modified sound. At 0, only original sound is outputted. "
-"Value can range from 0 to 1."
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid "Audio effect that can be used for real-time audio visualizations."
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"This audio effect does not affect sound output, but can be used for real-"
-"time audio visualizations.\n"
-"See also [AudioStreamGenerator] for procedurally generating sounds."
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml doc/classes/AudioServer.xml
-#: doc/classes/AudioStream.xml doc/classes/AudioStreamPlayer.xml
-#: doc/classes/CanvasItem.xml
-msgid "Audio Spectrum Demo"
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-#: doc/classes/AudioStreamGenerator.xml
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-msgid "Godot 3.2 will get new audio features"
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"The length of the buffer to keep (in seconds). Higher values keep data "
-"around for longer, but require more memory."
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzer.xml
-msgid ""
-"The size of the [url=https://en.wikipedia.org/wiki/"
-"Fast_Fourier_transform]Fast Fourier transform[/url] buffer. Higher values "
-"smooth out the spectrum analysis over time, but have greater latency. The "
-"effects of this higher latency are especially noticeable with sudden "
-"amplitude changes."
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzerInstance.xml
-msgid "Use the average value as magnitude."
-msgstr ""
-
-#: doc/classes/AudioEffectSpectrumAnalyzerInstance.xml
-msgid "Use the maximum value as magnitude."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Server interface for low-level audio access."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"[AudioServer] is a low-level server interface for audio access. It is in "
-"charge of creating sample data (playable audio) as well as its playback via "
-"a voice interface."
-msgstr ""
-
-#: doc/classes/AudioServer.xml doc/classes/AudioStreamPlayer.xml
-msgid "Audio Device Changer Demo"
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Adds a bus at [code]at_position[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Adds an [AudioEffect] effect to the bus [code]bus_idx[/code] at "
-"[code]at_position[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the names of all audio input devices detected on the system.\n"
-"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
-"[code]true[/code] for audio input to work. See also that setting's "
-"description for caveats related to permissions and operating system privacy "
-"settings."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Generates an [AudioBusLayout] using the available buses and effects."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the amount of channels of the bus at index [code]bus_idx[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the [AudioEffect] at position [code]effect_idx[/code] in bus "
-"[code]bus_idx[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the number of effects on the bus at [code]bus_idx[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the [AudioEffectInstance] assigned to the given bus and effect "
-"indices (and optionally channel)."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the index of the bus with the name [code]bus_name[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the name of the bus with the index [code]bus_idx[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the peak volume of the left speaker at bus index [code]bus_idx[/"
-"code] and channel index [code]channel[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the peak volume of the right speaker at bus index [code]bus_idx[/"
-"code] and channel index [code]channel[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Returns the name of the bus that the bus at index [code]bus_idx[/code] sends "
-"to."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the volume of the bus at index [code]bus_idx[/code] in dB."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the names of all audio devices detected on the system."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the sample rate at the output of the [AudioServer]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the audio driver's output latency."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the speaker configuration."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the relative time since the last mix occurred."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Returns the relative time until the next mix occurs."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"If [code]true[/code], the bus at index [code]bus_idx[/code] is bypassing "
-"effects."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"If [code]true[/code], the effect at index [code]effect_idx[/code] on the bus "
-"at index [code]bus_idx[/code] is enabled."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "If [code]true[/code], the bus at index [code]bus_idx[/code] is muted."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"If [code]true[/code], the bus at index [code]bus_idx[/code] is in solo mode."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Locks the audio driver's main loop.\n"
-"[b]Note:[/b] Remember to unlock it afterwards."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Moves the bus from index [code]index[/code] to index [code]to_index[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Removes the bus at index [code]index[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Removes the effect at index [code]effect_idx[/code] from the bus at index "
-"[code]bus_idx[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Overwrites the currently used [AudioBusLayout]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Sets the name of the bus at index [code]bus_idx[/code] to [code]name[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Connects the output of the bus at [code]bus_idx[/code] to the bus named "
-"[code]send[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Sets the volume of the bus at index [code]bus_idx[/code] to [code]volume_db[/"
-"code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Swaps the position of two effects in bus [code]bus_idx[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Unlocks the audio driver's main loop. (After locking it, you should always "
-"unlock it.)"
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Number of available audio buses."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Name of the current device for audio input (see [method "
-"capture_get_device_list]). On systems with multiple audio inputs (such as "
-"analog, USB and HDMI audio), this can be used to select the audio input "
-"device. The value [code]\"Default\"[/code] will record audio on the system-"
-"wide default audio input. If an invalid device name is set, the value will "
-"be reverted back to [code]\"Default\"[/code].\n"
-"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
-"[code]true[/code] for audio input to work. See also that setting's "
-"description for caveats related to permissions and operating system privacy "
-"settings."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Name of the current device for audio output (see [method get_device_list]). "
-"On systems with multiple audio outputs (such as analog, USB and HDMI audio), "
-"this can be used to select the audio output device. The value "
-"[code]\"Default\"[/code] will play audio on the system-wide default audio "
-"output. If an invalid device name is set, the value will be reverted back to "
-"[code]\"Default\"[/code]."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid ""
-"Scales the rate at which audio is played (i.e. setting it to [code]0.5[/"
-"code] will make the audio be played twice as fast)."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Emitted when the [AudioBusLayout] changes."
-msgstr ""
-
-#: doc/classes/AudioServer.xml
-msgid "Two or fewer speakers were detected."
-msgstr "Zwei oder weniger Lautsprecher wurden erkannt."
-
-#: doc/classes/AudioServer.xml
-msgid "A 3.1 channel surround setup was detected."
-msgstr "Ein 3.1 Kanal Surround Setup wurde erkannt."
-
-#: doc/classes/AudioServer.xml
-msgid "A 5.1 channel surround setup was detected."
-msgstr "Ein 5.1 Kanal Surround Setup wurde erkannt."
-
-#: doc/classes/AudioServer.xml
-msgid "A 7.1 channel surround setup was detected."
-msgstr "Ein 7.1 Kanal Surround Setup wurde erkannt."
-
-#: doc/classes/AudioStream.xml
-msgid "Base class for audio streams."
-msgstr ""
-
-#: doc/classes/AudioStream.xml
-msgid ""
-"Base class for audio streams. Audio streams are used for sound effects and "
-"music playback, and support WAV (via [AudioStreamSample]) and OGG (via "
-"[AudioStreamOGGVorbis]) file formats."
-msgstr ""
-
-#: doc/classes/AudioStream.xml doc/classes/AudioStreamPlayer.xml
-msgid "Audio streams"
-msgstr ""
-
-#: doc/classes/AudioStream.xml doc/classes/AudioStreamGenerator.xml
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-#: doc/classes/AudioStreamPlayback.xml doc/classes/AudioStreamPlayer.xml
-msgid "Audio Generator Demo"
-msgstr ""
-
-#: doc/classes/AudioStream.xml
-msgid "Returns the length of the audio stream in seconds."
-msgstr "Liefert die Länge des Audio Streams in Sekunden zurück."
-
-#: doc/classes/AudioStreamGenerator.xml
-msgid "Audio stream that generates sounds procedurally."
-msgstr ""
-
-#: doc/classes/AudioStreamGenerator.xml
-msgid ""
-"This audio stream does not play back sounds, but expects a script to "
-"generate audio data for it instead. See also "
-"[AudioStreamGeneratorPlayback].\n"
-"See also [AudioEffectSpectrumAnalyzer] for performing real-time audio "
-"spectrum analysis.\n"
-"[b]Note:[/b] Due to performance constraints, this class is best used from C# "
-"or from a compiled language via GDNative. If you still want to use this "
-"class from GDScript, consider using a lower [member mix_rate] such as 11,025 "
-"Hz or 22,050 Hz."
-msgstr ""
-
-#: doc/classes/AudioStreamGenerator.xml
-msgid ""
-"The length of the buffer to generate (in seconds). Lower values result in "
-"less latency, but require the script to generate audio data faster, "
-"resulting in increased CPU usage and more risk for audio cracking if the CPU "
-"can't keep up."
-msgstr ""
-
-#: doc/classes/AudioStreamGenerator.xml
-msgid ""
-"The sample rate to use (in Hz). Higher values are more demanding for the CPU "
-"to generate, but result in better quality.\n"
-"In games, common sample rates in use are [code]11025[/code], [code]16000[/"
-"code], [code]22050[/code], [code]32000[/code], [code]44100[/code], and "
-"[code]48000[/code].\n"
-"According to the [url=https://en.wikipedia.org/wiki/"
-"Nyquist%E2%80%93Shannon_sampling_theorem]Nyquist-Shannon sampling theorem[/"
-"url], there is no quality difference to human hearing when going past 40,000 "
-"Hz (since most humans can only hear up to ~20,000 Hz, often less). If you "
-"are generating lower-pitched sounds such as voices, lower sample rates such "
-"as [code]32000[/code] or [code]22050[/code] may be usable with no loss in "
-"quality."
-msgstr ""
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-msgid "Plays back audio generated using [AudioStreamGenerator]."
-msgstr ""
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-msgid ""
-"This class is meant to be used with [AudioStreamGenerator] to play back the "
-"generated audio in real-time."
-msgstr ""
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if a buffer of the size [code]amount[/code] can be "
-"pushed to the audio sample data buffer without overflowing it, [code]false[/"
-"code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-#, fuzzy
-msgid "Clears the audio sample data buffer."
-msgstr "Enthält die Audio Daten in Bytes."
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-#, fuzzy
-msgid ""
-"Returns the number of frames that can be pushed to the audio sample data "
-"buffer without overflowing it. If the result is [code]0[/code], the buffer "
-"is full."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-msgid ""
-"Pushes several audio data frames to the buffer. This is usually more "
-"efficient than [method push_frame] in C# and compiled languages via "
-"GDNative, but [method push_buffer] may be [i]less[/i] efficient in GDScript."
-msgstr ""
-
-#: doc/classes/AudioStreamGeneratorPlayback.xml
-msgid ""
-"Pushes a single audio data frame to the buffer. This is usually less "
-"efficient than [method push_buffer] in C# and compiled languages via "
-"GDNative, but [method push_frame] may be [i]more[/i] efficient in GDScript."
-msgstr ""
-
-#: doc/classes/AudioStreamMicrophone.xml
-msgid "Plays real-time audio input data."
-msgstr ""
-
-#: doc/classes/AudioStreamMicrophone.xml
-msgid ""
-"When used directly in an [AudioStreamPlayer] node, [AudioStreamMicrophone] "
-"plays back microphone input in real-time. This can be used in conjunction "
-"with [AudioEffectCapture] to process the data or save it.\n"
-"[b]Note:[/b] [member ProjectSettings.audio/enable_audio_input] must be "
-"[code]true[/code] for audio input to work. See also that setting's "
-"description for caveats related to permissions and operating system privacy "
-"settings."
-msgstr ""
-
-#: modules/minimp3/doc_classes/AudioStreamMP3.xml
-#, fuzzy
-msgid "MP3 audio stream driver."
-msgstr "OGG Vorbis Audio Stream Treiber."
-
-#: modules/minimp3/doc_classes/AudioStreamMP3.xml
-#: modules/stb_vorbis/doc_classes/AudioStreamOGGVorbis.xml
-msgid "Contains the audio data in bytes."
-msgstr "Enthält die Audio Daten in Bytes."
-
-#: modules/minimp3/doc_classes/AudioStreamMP3.xml
-#: modules/stb_vorbis/doc_classes/AudioStreamOGGVorbis.xml
-msgid ""
-"If [code]true[/code], the stream will automatically loop when it reaches the "
-"end."
-msgstr ""
-"Wenn [code]wahr[/code] wird der Stream automatisch neu gestartet wenn er das "
-"Ende erreicht."
-
-#: modules/minimp3/doc_classes/AudioStreamMP3.xml
-#: modules/stb_vorbis/doc_classes/AudioStreamOGGVorbis.xml
-msgid "Time in seconds at which the stream starts after being looped."
-msgstr ""
-
-#: modules/stb_vorbis/doc_classes/AudioStreamOGGVorbis.xml
-msgid "OGG Vorbis audio stream driver."
-msgstr "OGG Vorbis Audio Stream Treiber."
-
-#: doc/classes/AudioStreamPlayback.xml
-msgid "Meta class for playing back audio."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayback.xml
-msgid ""
-"Can play, loop, pause a scroll through audio. See [AudioStream] and "
-"[AudioStreamOGGVorbis] for usage."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid "Plays back audio non-positionally."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid ""
-"Plays an audio stream non-positionally.\n"
-"To play audio positionally, use [AudioStreamPlayer2D] or "
-"[AudioStreamPlayer3D] instead of [AudioStreamPlayer]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid "Returns the position in the [AudioStream] in seconds."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid ""
-"Returns the [AudioStreamPlayback] object associated with this "
-"[AudioStreamPlayer]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid "Plays the audio from the given [code]from_position[/code], in seconds."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Sets the position from which audio will be played, in seconds."
-msgstr "Legt die Position in Sekunden fest, ab der die Tonausgabe startet."
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Stops the audio."
-msgstr "Beendet die Tonausgabe."
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "If [code]true[/code], audio plays when added to scene tree."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid ""
-"Bus on which this audio is playing.\n"
-"[b]Note:[/b] When setting this property, keep in mind that no validation is "
-"performed to see if the given name matches an existing bus. This is because "
-"audio bus layouts might be loaded after this property is set. If this given "
-"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
-"code]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid ""
-"If the audio configuration has more than two speakers, this sets the target "
-"channels. See [enum MixTarget] constants."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"The pitch and the tempo of the audio, as a multiplier of the audio sample's "
-"sample rate."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "If [code]true[/code], audio is playing."
-msgstr "Falls [code]wahr[/code] wir Audio gerade abgespielt."
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid "The [AudioStream] object to be played."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-msgid ""
-"If [code]true[/code], the playback is paused. You can resume it by setting "
-"[code]stream_paused[/code] to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid "Volume of sound, in dB."
-msgstr "Lautstärke der Tonausgabe in dB."
-
-#: doc/classes/AudioStreamPlayer.xml doc/classes/AudioStreamPlayer2D.xml
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Emitted when the audio stops playing."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid "The audio will be played only on the first channel."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid "The audio will be played on all surround channels."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer.xml
-msgid ""
-"The audio will be played on the second channel, which is usually the center."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml
-#, fuzzy
-msgid "Plays positional sound in 2D space."
-msgstr "Spielt Audio in 2D."
-
-#: doc/classes/AudioStreamPlayer2D.xml
-msgid ""
-"Plays audio that dampens with distance from a given position.\n"
-"By default, audio is heard from the screen center. This can be changed by "
-"adding a [Listener2D] node to the scene and enabling it by calling [method "
-"Listener2D.make_current] on it.\n"
-"See also [AudioStreamPlayer] to play a sound non-positionally.\n"
-"[b]Note:[/b] Hiding an [AudioStreamPlayer2D] node does not disable its audio "
-"output. To temporarily disable an [AudioStreamPlayer2D]'s audio output, set "
-"[member volume_db] to a very low value like [code]-100[/code] (which isn't "
-"audible to human hearing)."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml doc/classes/AudioStreamPlayer3D.xml
-msgid "Returns the position in the [AudioStream]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml
-msgid ""
-"Returns the [AudioStreamPlayback] object associated with this "
-"[AudioStreamPlayer2D]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Plays the audio from the given position [code]from_position[/code], in "
-"seconds."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml
-msgid ""
-"Determines which [Area2D] layers affect the sound for reverb and audio bus "
-"effects. Areas can be used to redirect [AudioStream]s so that they play in a "
-"certain audio bus. An example of how you might use this is making a "
-"\"water\" area so that sounds played in the water are redirected through an "
-"audio bus to make them sound like they are being played underwater."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml
-msgid "Dampens audio over distance with this as an exponent."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml
-msgid "Maximum distance from which audio is still hearable."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer2D.xml
-msgid "Base volume without dampening."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Plays positional sound in 3D space."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Plays a sound effect with directed sound effects, dampens with distance if "
-"needed, generates effect of hearable position in space. For greater realism, "
-"a low-pass filter is automatically applied to distant sounds. This can be "
-"disabled by setting [member attenuation_filter_cutoff_hz] to [code]20500[/"
-"code].\n"
-"By default, audio is heard from the camera position. This can be changed by "
-"adding a [Listener] node to the scene and enabling it by calling [method "
-"Listener.make_current] on it.\n"
-"See also [AudioStreamPlayer] to play a sound non-positionally.\n"
-"[b]Note:[/b] Hiding an [AudioStreamPlayer3D] node does not disable its audio "
-"output. To temporarily disable an [AudioStreamPlayer3D]'s audio output, set "
-"[member unit_db] to a very low value like [code]-100[/code] (which isn't "
-"audible to human hearing)."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Returns the [AudioStreamPlayback] object associated with this "
-"[AudioStreamPlayer3D]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Determines which [Area] layers affect the sound for reverb and audio bus "
-"effects. Areas can be used to redirect [AudioStream]s so that they play in a "
-"certain audio bus. An example of how you might use this is making a "
-"\"water\" area so that sounds played in the water are redirected through an "
-"audio bus to make them sound like they are being played underwater."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Dampens audio using a low-pass filter above this frequency, in Hz. To "
-"disable the dampening effect entirely, set this to [code]20500[/code] as "
-"this frequency is above the human hearing limit."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Amount how much the filter affects the loudness, in decibels."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Decides if audio should get quieter with distance linearly, quadratically, "
-"logarithmically, or not be affected by distance, effectively disabling "
-"attenuation."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"If [code]true[/code], audio plays when the AudioStreamPlayer3D node is added "
-"to scene tree."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"The bus on which this audio is playing.\n"
-"[b]Note:[/b] When setting this property, keep in mind that no validation is "
-"performed to see if the given name matches an existing bus. This is because "
-"audio bus layouts might be loaded after this property is set. If this given "
-"name can't be resolved at runtime, it will fall back to [code]\"Master\"[/"
-"code]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Decides in which step the [url=https://en.wikipedia.org/wiki/"
-"Doppler_effect]Doppler effect[/url] should be calculated.\n"
-"[b]Note:[/b] Only effective if the current [Camera]'s [member Camera."
-"doppler_tracking] property is set to a value other than [constant Camera."
-"DOPPLER_TRACKING_DISABLED]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "The angle in which the audio reaches cameras undampened."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"If [code]true[/code], the audio should be dampened according to the "
-"direction of the sound."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Dampens audio if camera is outside of [member emission_angle_degrees] and "
-"[member emission_angle_enabled] is set by this factor, in decibels."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Sets the absolute maximum of the soundlevel, in decibels."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Sets the distance from which the [member out_of_range_mode] takes effect. "
-"Has no effect if set to 0."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Decides if audio should pause when source is outside of [member "
-"max_distance] range."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "The [AudioStream] resource to be played."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"If [code]true[/code], the playback is paused. You can resume it by setting "
-"[member stream_paused] to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "The base sound level unaffected by dampening, in decibels."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"The factor for the attenuation effect. Higher values make the sound audible "
-"over a larger distance."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Linear dampening of loudness according to distance."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Squared dampening of loudness according to distance."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Logarithmic dampening of loudness according to distance."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"No dampening of loudness according to distance. The sound will still be "
-"heard positionally, unlike an [AudioStreamPlayer]. [constant "
-"ATTENUATION_DISABLED] can be combined with a [member max_distance] value "
-"greater than [code]0.0[/code] to achieve linear attenuation clamped to a "
-"sphere of a defined size."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Mix this audio in, even when it's out of range. This increases CPU usage, "
-"but keeps the sound playing at the correct position if the camera leaves and "
-"enters the [AudioStreamPlayer3D]'s [member max_distance] radius."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Pause this audio when it gets out of range. This decreases CPU usage, but "
-"will cause the sound to restart if the camera leaves and enters the "
-"[AudioStreamPlayer3D]'s [member max_distance] radius."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Disables doppler tracking."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid "Executes doppler tracking in idle step (every rendered frame)."
-msgstr ""
-
-#: doc/classes/AudioStreamPlayer3D.xml
-msgid ""
-"Executes doppler tracking in physics step (every simulated physics frame)."
-msgstr ""
-
-#: doc/classes/AudioStreamRandomPitch.xml
-msgid "Plays audio with random pitch shifting."
-msgstr ""
-
-#: doc/classes/AudioStreamRandomPitch.xml
-msgid "Randomly varies pitch on each start."
-msgstr ""
-
-#: doc/classes/AudioStreamRandomPitch.xml
-msgid "The current [AudioStream]."
-msgstr ""
-
-#: doc/classes/AudioStreamRandomPitch.xml
-msgid "The intensity of random pitch variation."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "Stores audio data loaded from WAV files."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"AudioStreamSample stores sound samples loaded from WAV files. To play the "
-"stored sound, use an [AudioStreamPlayer] (for non-positional audio) or "
-"[AudioStreamPlayer2D]/[AudioStreamPlayer3D] (for positional audio). The "
-"sound can be looped.\n"
-"This class can also be used to store dynamically-generated PCM audio data. "
-"See also [AudioStreamGenerator] for procedural audio generation."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"Saves the AudioStreamSample as a WAV file to [code]path[/code]. Samples with "
-"IMA ADPCM format can't be saved.\n"
-"[b]Note:[/b] A [code].wav[/code] extension is automatically appended to "
-"[code]path[/code] if it is missing."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"Contains the audio data in bytes.\n"
-"[b]Note:[/b] This property expects signed PCM8 data. To convert unsigned "
-"PCM8 to signed PCM8, subtract 128 from each byte."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "Audio format. See [enum Format] constants for values."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"The loop start point (in number of samples, relative to the beginning of the "
-"sample). This information will be imported automatically from the WAV file "
-"if present."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"The loop end point (in number of samples, relative to the beginning of the "
-"sample). This information will be imported automatically from the WAV file "
-"if present."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"The loop mode. This information will be imported automatically from the WAV "
-"file if present. See [enum LoopMode] constants for values."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"The sample rate for mixing this audio. Higher values require more storage "
-"space, but result in better quality.\n"
-"In games, common sample rates in use are [code]11025[/code], [code]16000[/"
-"code], [code]22050[/code], [code]32000[/code], [code]44100[/code], and "
-"[code]48000[/code].\n"
-"According to the [url=https://en.wikipedia.org/wiki/"
-"Nyquist%E2%80%93Shannon_sampling_theorem]Nyquist-Shannon sampling theorem[/"
-"url], there is no quality difference to human hearing when going past 40,000 "
-"Hz (since most humans can only hear up to ~20,000 Hz, often less). If you "
-"are using lower-pitched sounds such as voices, lower sample rates such as "
-"[code]32000[/code] or [code]22050[/code] may be usable with no loss in "
-"quality."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "If [code]true[/code], audio is stereo."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "8-bit audio codec."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "16-bit audio codec."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "Audio is compressed using IMA ADPCM."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid "Audio does not loop."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"Audio loops the data between [member loop_begin] and [member loop_end], "
-"playing forward only."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"Audio loops the data between [member loop_begin] and [member loop_end], "
-"playing back and forth."
-msgstr ""
-
-#: doc/classes/AudioStreamSample.xml
-msgid ""
-"Audio loops the data between [member loop_begin] and [member loop_end], "
-"playing backward only."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid ""
-"Copies a region of the screen (or the whole screen) to a buffer so it can be "
-"accessed in your shader scripts through the "
-"[code]texture(SCREEN_TEXTURE, ...)[/code] function."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid ""
-"Node for back-buffering the currently-displayed screen. The region defined "
-"in the [BackBufferCopy] node is buffered with the content of the screen it "
-"covers, or the entire screen according to the copy mode set. Use the "
-"[code]texture(SCREEN_TEXTURE, ...)[/code] function in your shader scripts to "
-"access the buffer.\n"
-"[b]Note:[/b] Since this node inherits from [Node2D] (and not [Control]), "
-"anchors and margins won't apply to child [Control]-derived nodes. This can "
-"be problematic when resizing the window. To avoid this, add [Control]-"
-"derived nodes as [i]siblings[/i] to the [BackBufferCopy] node instead of "
-"adding them as children."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid "Buffer mode. See [enum CopyMode] constants."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid ""
-"The area covered by the [BackBufferCopy]. Only used if [member copy_mode] is "
-"[constant COPY_MODE_RECT]."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid ""
-"Disables the buffering mode. This means the [BackBufferCopy] node will "
-"directly use the portion of screen it covers."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid "[BackBufferCopy] buffers a rectangular region."
-msgstr ""
-
-#: doc/classes/BackBufferCopy.xml
-msgid "[BackBufferCopy] buffers the entire screen."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "Prerendered indirect light map for a scene."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Baked lightmaps are an alternative workflow for adding indirect (or baked) "
-"lighting to a scene. Unlike the [GIProbe] approach, baked lightmaps work "
-"fine on low-end PCs and mobile devices as they consume almost no resources "
-"in run-time.\n"
-"[b]Procedural generation:[/b] Lightmap baking functionality is only "
-"available in the editor. This means [BakedLightmap] is not suited to "
-"procedurally generated or user-built levels. For procedurally generated or "
-"user-built levels, use [GIProbe] instead.\n"
-"[b]Note:[/b] Due to how lightmaps work, most properties only have a visible "
-"effect once lightmaps are baked again."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Bakes the lightmap, scanning from the given [code]from_node[/code] root and "
-"saves the resulting [BakedLightmapData] in [code]data_save_path[/code]. If "
-"no root node is provided, parent of this node will be used as root instead. "
-"If no save path is provided it will try to match the path from the current "
-"[member light_data]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"If [code]true[/code], the lightmapper will merge the textures for all meshes "
-"into one or several large layered textures. If [code]false[/code], every "
-"mesh will get its own lightmap texture, which is less efficient.\n"
-"[b]Note:[/b] Atlas lightmap rendering is only supported in GLES3, [i]not[/i] "
-"GLES2. Non-atlas lightmap rendering is supported by both GLES3 and GLES2. If "
-"[member ProjectSettings.rendering/quality/driver/fallback_to_gles2] is "
-"[code]true[/code], consider baking lightmaps with [member atlas_generate] "
-"set to [code]false[/code] so that the resulting lightmap is visible in both "
-"GLES3 and GLES2."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Maximum size of each lightmap layer, only used when [member atlas_generate] "
-"is enabled."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Raycasting bias used during baking to avoid floating point precision issues."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"The energy multiplier for each bounce. Higher values will make indirect "
-"lighting brighter. A value of [code]1.0[/code] represents physically "
-"accurate behavior, but higher values can be used to make indirect lighting "
-"propagate more visibly when using a low number of bounces. This can be used "
-"to speed up bake times by lowering the number of [member bounces] then "
-"increasing [member bounce_indirect_energy]. Unlike [member BakedLightmapData."
-"energy], this property does not affect direct lighting emitted by light "
-"nodes, emissive materials and the environment.\n"
-"[b]Note:[/b] [member bounce_indirect_energy] only has an effect if [member "
-"bounces] is set to a value greater than or equal to [code]1[/code]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Number of light bounces that are taken into account during baking. See also "
-"[member bounce_indirect_energy]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "Grid size used for real-time capture information on dynamic objects."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"When enabled, an octree containing the scene's lighting information will be "
-"computed. This octree will then be used to light dynamic objects in the "
-"scene."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Bias value to reduce the amount of light propagation in the captured octree."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "Bake quality of the capture data."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"If a baked mesh doesn't have a UV2 size hint, this value will be used to "
-"roughly compute a suitable lightmap size."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"The environment color when [member environment_mode] is set to [constant "
-"ENVIRONMENT_MODE_CUSTOM_COLOR]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"The energy scaling factor when when [member environment_mode] is set to "
-"[constant ENVIRONMENT_MODE_CUSTOM_COLOR] or [constant "
-"ENVIRONMENT_MODE_CUSTOM_SKY]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"The [Sky] resource to use when [member environment_mode] is set o [constant "
-"ENVIRONMENT_MODE_CUSTOM_SKY]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-#, fuzzy
-msgid "The rotation of the baked custom sky."
-msgstr "Der Name des Audiobusses des Bereichs."
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Minimum ambient light for all the lightmap texels. This doesn't take into "
-"account any occlusion from the scene's geometry, it simply ensures a minimum "
-"amount of light on all the lightmap texels. Can be used for artistic control "
-"on shadow color."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "Decides which environment to use during baking."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Size of the baked lightmap. Only meshes inside this region will be included "
-"in the baked lightmap, also used as the bounds of the captured region for "
-"dynamic lighting."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Deprecated, in previous versions it determined the location where lightmaps "
-"were be saved."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "The calculated light data."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Determines the amount of samples per texel used in indirect light baking. "
-"The amount of samples for each quality level can be configured in the "
-"project settings."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Store full color values in the lightmap textures. When disabled, lightmap "
-"textures will store a single brightness channel. Can be disabled to reduce "
-"disk usage if the scene contains only white lights or you don't mind losing "
-"color information in indirect lighting."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"When enabled, a lightmap denoiser will be used to reduce the noise inherent "
-"to Monte Carlo based global illumination."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"If [code]true[/code], stores the lightmap textures in a high dynamic range "
-"format (EXR). If [code]false[/code], stores the lightmap texture in a low "
-"dynamic range PNG image. This can be set to [code]false[/code] to reduce "
-"disk usage, but light values over 1.0 will be clamped and you may see "
-"banding caused by the reduced precision.\n"
-"[b]Note:[/b] Setting [member use_hdr] to [code]true[/code] will decrease "
-"lightmap banding even when using the GLES2 backend or if [member "
-"ProjectSettings.rendering/quality/depth/hdr] is [code]false[/code]."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "The lowest bake quality mode. Fastest to calculate."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "The default bake quality mode."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "A higher bake quality mode. Takes longer to calculate."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "The highest bake quality mode. Takes the longest to calculate."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-#, fuzzy
-msgid "Baking was successful."
-msgstr "Die Verbindung war erfolgreich."
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Returns if no viable save path is found. This can happen where an [member "
-"image_path] is not specified or when the save location is invalid."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml doc/classes/SpatialMaterial.xml
-msgid "Currently unused."
-msgstr "zu Zeit ungenutzt."
-
-#: doc/classes/BakedLightmap.xml
-#, fuzzy
-msgid "Returns when the baker cannot save per-mesh textures to file."
-msgstr "Gibt den Arkuskosinus2 der Parameter zurück."
-
-#: doc/classes/BakedLightmap.xml
-msgid "The size of the generated lightmaps is too large."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "Some mesh contains UV2 values outside the [code][0,1][/code] range."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "Returns if user cancels baking."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"Returns if lightmapper can't be created. Unless you are using a custom "
-"lightmapper, please report this as bug."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid ""
-"There is no root node to start baking from. Either provide [code]from_node[/"
-"code] argument or attach this node to a parent that should be used as root."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "No environment is used during baking."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "The baked environment is automatically picked from the current scene."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "A custom sky is used as environment during baking."
-msgstr ""
-
-#: doc/classes/BakedLightmap.xml
-msgid "A custom solid color is used as environment during baking."
-msgstr ""
-
-#: doc/classes/BakedLightmapData.xml
-msgid ""
-"Global energy multiplier for baked and dynamic capture objects. This can be "
-"changed at run-time without having to bake lightmaps again.\n"
-"To adjust only the energy of indirect lighting (without affecting direct "
-"lighting or emissive materials), adjust [member BakedLightmap."
-"bounce_indirect_energy] and bake lightmaps again."
-msgstr ""
-
-#: doc/classes/BakedLightmapData.xml
-msgid ""
-"Controls whether dynamic capture objects receive environment lighting or not."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "Base class for different kinds of buttons."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"BaseButton is the abstract base class for buttons, so it shouldn't be used "
-"directly (it doesn't display anything). Other types of buttons inherit from "
-"it."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Called when the button is pressed. If you need to know the button's pressed "
-"state (and [member toggle_mode] is active), use [method _toggled] instead."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Called when the button is toggled (only if [member toggle_mode] is active)."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Returns the visual state used to draw the button. This is useful mainly when "
-"implementing your own draw code by either overriding _draw() or connecting "
-"to \"draw\" signal. The visual state of the button is defined by the [enum "
-"DrawMode] enum."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Returns [code]true[/code] if the mouse has entered the button and has not "
-"left it yet."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Changes the [member pressed] state of the button, without emitting [signal "
-"toggled]. Use when you just want to change the state of the button without "
-"sending the pressed event (e.g. when initializing scene). Only works if "
-"[member toggle_mode] is [code]true[/code].\n"
-"[b]Note:[/b] This method doesn't unpress other buttons in its button [member "
-"group]."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Determines when the button is considered clicked, one of the [enum "
-"ActionMode] constants."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Binary mask to choose which mouse buttons this button will respond to.\n"
-"To allow both left-click and right-click, use [code]BUTTON_MASK_LEFT | "
-"BUTTON_MASK_RIGHT[/code]."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"If [code]true[/code], the button is in disabled state and can't be clicked "
-"or toggled."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"[i]Deprecated.[/i] This property has been deprecated due to redundancy and "
-"will be removed in Godot 4.0. This property no longer has any effect when "
-"set. Please use [member Control.focus_mode] instead."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "[ButtonGroup] associated to the button."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"If [code]true[/code], the button stays pressed when moving the cursor "
-"outside the button while pressing it.\n"
-"[b]Note:[/b] This property only affects the button's visual appearance. "
-"Signals will be emitted at the same moment regardless of this property's "
-"value."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"If [code]true[/code], the button's state is pressed. Means the button is "
-"pressed down or toggled (if [member toggle_mode] is active). Only works if "
-"[member toggle_mode] is [code]true[/code].\n"
-"[b]Note:[/b] Setting [member pressed] will result in [signal toggled] to be "
-"emitted. If you want to change the pressed state without emitting that "
-"signal, use [method set_pressed_no_signal]."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "[ShortCut] associated to the button."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"If [code]true[/code], the button will add information about its shortcut in "
-"the tooltip."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"If [code]true[/code], the button is in toggle mode. Makes the button flip "
-"state between pressed and unpressed each time its area is clicked."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "Emitted when the button starts being held down."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "Emitted when the button stops being held down."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Emitted when the button is toggled or pressed. This is on [signal "
-"button_down] if [member action_mode] is [constant ACTION_MODE_BUTTON_PRESS] "
-"and on [signal button_up] otherwise.\n"
-"If you need to know the button's pressed state (and [member toggle_mode] is "
-"active), use [signal toggled] instead."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Emitted when the button was just toggled between pressed and normal states "
-"(only if [member toggle_mode] is active). The new state is contained in the "
-"[code]button_pressed[/code] argument."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"The normal state (i.e. not pressed, not hovered, not toggled and enabled) of "
-"buttons."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "The state of buttons are pressed."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "The state of buttons are hovered."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "The state of buttons are disabled."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "The state of buttons are both hovered and pressed."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid "Require just a press to consider the button clicked."
-msgstr ""
-
-#: doc/classes/BaseButton.xml
-msgid ""
-"Require a press and a subsequent release before considering the button "
-"clicked."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "3×3 matrix datatype."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"3×3 matrix used for 3D rotation and scale. Almost always used as an "
-"orthogonal basis for a Transform.\n"
-"Contains 3 vector fields X, Y and Z as its columns, which are typically "
-"interpreted as the local basis vectors of a transformation. For such use, it "
-"is composed of a scaling and a rotation matrix, in that order (M = R.S).\n"
-"Can also be accessed as array of 3D vectors. These vectors are normally "
-"orthogonal to each other, but are not necessarily normalized (due to "
-"scaling).\n"
-"For more information, read the \"Matrices and transforms\" documentation "
-"article."
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid "Matrices and transforms"
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/Quat.xml doc/classes/Transform.xml
-msgid "Using 3D transforms"
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/Line2D.xml doc/classes/Transform.xml
-#: doc/classes/Transform2D.xml doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "Matrix Transform Demo"
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/CylinderShape.xml
-#: doc/classes/Dictionary.xml doc/classes/DynamicFont.xml
-#: doc/classes/DynamicFontData.xml doc/classes/File.xml doc/classes/Input.xml
-#: doc/classes/InputEvent.xml doc/classes/InputEventAction.xml
-#: doc/classes/InputEventMouseMotion.xml doc/classes/KinematicBody.xml
-#: doc/classes/RayCast.xml doc/classes/StaticBody.xml
-#: doc/classes/SurfaceTool.xml doc/classes/TextureButton.xml
-#: doc/classes/TextureRect.xml doc/classes/Thread.xml
-#: doc/classes/VBoxContainer.xml
-msgid "3D Voxel Demo"
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/Line2D.xml doc/classes/Transform.xml
-#: doc/classes/Transform2D.xml
-msgid "2.5D Demo"
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Constructs a pure rotation basis matrix from the given quaternion."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Constructs a pure rotation basis matrix from the given Euler angles (in the "
-"YXZ convention: when *composing*, first Y, then X, and Z last), given in the "
-"vector format as (X angle, Y angle, Z angle).\n"
-"Consider using the [Quat] constructor instead, which uses a quaternion "
-"instead of Euler angles."
-msgstr ""
-
-#: doc/classes/Basis.xml
-#, fuzzy
-msgid ""
-"Constructs a pure rotation basis matrix, rotated around the given "
-"[code]axis[/code] by [code]angle[/code] (in radians). The axis must be a "
-"normalized vector."
-msgstr ""
-"Konstruiert ein Quaternion, das sich um die angegebene Achse um den "
-"angegebenen Winkel dreht. Die Achse muss ein normalisierter Vektor sein."
-
-#: doc/classes/Basis.xml
-msgid "Constructs a basis matrix from 3 axis vectors (matrix columns)."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Returns the determinant of the basis matrix. If the basis is uniformly "
-"scaled, its determinant is the square of the scale.\n"
-"A negative determinant means the basis has a negative scale. A zero "
-"determinant means the basis isn't invertible, and is usually considered "
-"invalid."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Returns the basis's rotation in the form of Euler angles (in the YXZ "
-"convention: when decomposing, first Z, then X, and Y last). The returned "
-"vector contains the rotation angles in the format (X angle, Y angle, Z "
-"angle).\n"
-"Consider using the [method get_rotation_quat] method instead, which returns "
-"a [Quat] quaternion instead of Euler angles."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"This function considers a discretization of rotations into 24 points on unit "
-"sphere, lying along the vectors (x,y,z) with each component being either -1, "
-"0, or 1, and returns the index of the point best representing the "
-"orientation of the object. It is mainly used by the [GridMap] editor. For "
-"further details, refer to the Godot source code."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Returns the basis's rotation in the form of a quaternion. See [method "
-"get_euler] if you need Euler angles, but keep in mind quaternions should "
-"generally be preferred to Euler angles."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Assuming that the matrix is the combination of a rotation and scaling, "
-"return the absolute value of scaling factors along each axis."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Returns the inverse of the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if this basis and [code]b[/code] are approximately "
-"equal, by calling [code]is_equal_approx[/code] on each component.\n"
-"[b]Note:[/b] For complicated reasons, the epsilon argument is always "
-"discarded. Don't use the epsilon argument, it does nothing."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn dieses [AABB] und [code]aabb[/code] "
-"annähernd gleich sind, indem die [method @GDScript.is_equal_approx] für jede "
-"Komponente aufgerufen wird."
-
-#: doc/classes/Basis.xml
-msgid ""
-"Returns the orthonormalized version of the matrix (useful to call from time "
-"to time to avoid rounding error for orthogonal matrices). This performs a "
-"Gram-Schmidt orthonormalization on the basis of the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-#, fuzzy
-msgid ""
-"Introduce an additional rotation around the given axis by [code]angle[/code] "
-"(in radians). The axis must be a normalized vector."
-msgstr ""
-"Dreht diesen Vektor um eine gegebene Achse um [code]phi[/code] Bogenmaß. Die "
-"Achse muss ein normierter Vektor sein."
-
-#: doc/classes/Basis.xml
-msgid ""
-"Introduce an additional scaling specified by the given 3D scaling factor."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Assuming that the matrix is a proper rotation matrix, slerp performs a "
-"spherical-linear interpolation with another rotation matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Transposed dot product with the X axis of the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Transposed dot product with the Y axis of the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Transposed dot product with the Z axis of the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Returns the transposed version of the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid "Returns a vector transformed (multiplied) by the matrix."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"Returns a vector transformed (multiplied) by the transposed basis matrix.\n"
-"[b]Note:[/b] This results in a multiplication by the inverse of the matrix "
-"only if it represents a rotation-reflection."
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/Transform2D.xml
-msgid ""
-"The basis matrix's X vector (column 0). Equivalent to array index [code]0[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Basis.xml doc/classes/Transform2D.xml
-msgid ""
-"The basis matrix's Y vector (column 1). Equivalent to array index [code]1[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"The basis matrix's Z vector (column 2). Equivalent to array index [code]2[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"The identity basis, with no rotation or scaling applied.\n"
-"This is identical to calling [code]Basis()[/code] without any parameters. "
-"This constant can be used to make your code clearer, and for consistency "
-"with C#."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"The basis that will flip something along the X axis when used in a "
-"transformation."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"The basis that will flip something along the Y axis when used in a "
-"transformation."
-msgstr ""
-
-#: doc/classes/Basis.xml
-msgid ""
-"The basis that will flip something along the Z axis when used in a "
-"transformation."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid "Boolean matrix."
-msgstr "Boolesche Matrix."
-
-#: doc/classes/BitMap.xml
-msgid ""
-"A two-dimensional array of boolean values, can be used to efficiently store "
-"a binary matrix (every matrix element takes only one bit) and query the "
-"values using natural cartesian coordinates."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid ""
-"Returns an image of the same size as the bitmap and with a [enum Image."
-"Format] of type [code]FORMAT_L8[/code]. [code]true[/code] bits of the bitmap "
-"are being converted into white pixels, and [code]false[/code] bits into "
-"black."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid ""
-"Creates a bitmap with the specified size, filled with [code]false[/code]."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid ""
-"Creates a bitmap that matches the given image dimensions, every element of "
-"the bitmap is set to [code]false[/code] if the alpha value of the image at "
-"that position is equal to [code]threshold[/code] or less, and [code]true[/"
-"code] in other case."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid "Returns bitmap's value at the specified position."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid "Returns bitmap's dimensions."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid ""
-"Returns the amount of bitmap elements that are set to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid ""
-"Applies morphological dilation or erosion to the bitmap. If [code]pixels[/"
-"code] is positive, dilation is applied to the bitmap. If [code]pixels[/code] "
-"is negative, erosion is applied to the bitmap. [code]rect[/code] defines the "
-"area where the morphological operation is applied. Pixels located outside "
-"the [code]rect[/code] are unaffected by [method grow_mask]."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-#, fuzzy
-msgid "Resizes the image to [code]new_size[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/BitMap.xml
-msgid ""
-"Sets the bitmap's element at the specified position, to the specified value."
-msgstr ""
-
-#: doc/classes/BitMap.xml
-msgid "Sets a rectangular portion of the bitmap to the specified value."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid ""
-"Renders text using fonts under the [url=https://www.angelcode.com/products/"
-"bmfont/]BMFont[/url] format.\n"
-"Handles files with the [code].fnt[/code] extension."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid ""
-"Renders text using [code]*.fnt[/code] fonts containing texture atlases. "
-"Supports distance fields. For using vector font files like TTF directly, see "
-"[DynamicFont]."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid ""
-"Adds a character to the font, where [code]character[/code] is the Unicode "
-"value, [code]texture[/code] is the texture index, [code]rect[/code] is the "
-"region in the texture (in pixels!), [code]align[/code] is the (optional) "
-"alignment for the character and [code]advance[/code] is the (optional) "
-"advance."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid ""
-"Adds a kerning pair to the [BitmapFont] as a difference. Kerning pairs are "
-"special cases where a typeface advance is determined by the next character."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Adds a texture to the [BitmapFont]."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Clears all the font data and settings."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid ""
-"Creates a BitmapFont from the [code]*.fnt[/code] file at [code]path[/code]."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Returns a kerning pair as a difference."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Returns the font atlas texture at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Returns the number of textures in the BitmapFont atlas."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Ascent (number of pixels above the baseline)."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "If [code]true[/code], distance field hint is enabled."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "The fallback font."
-msgstr ""
-
-#: doc/classes/BitmapFont.xml
-msgid "Total font height (ascent plus descent) in pixels."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid "Joint used with [Skeleton2D] to control and animate other nodes."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid ""
-"Use a hierarchy of [code]Bone2D[/code] bound to a [Skeleton2D] to control, "
-"and animate other [Node2D] nodes.\n"
-"You can use [code]Bone2D[/code] and [code]Skeleton2D[/code] nodes to animate "
-"2D meshes created with the Polygon 2D UV editor.\n"
-"Each bone has a [member rest] transform that you can reset to with [method "
-"apply_rest]. These rest poses are relative to the bone's parent.\n"
-"If in the editor, you can set the rest pose of an entire skeleton using a "
-"menu option, from the code, you need to iterate over the bones to set their "
-"individual rest poses."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid "Stores the node's current transforms in [member rest]."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid ""
-"Returns the node's index as part of the entire skeleton. See [Skeleton2D]."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid ""
-"Returns the node's [member rest] [code]Transform2D[/code] if it doesn't have "
-"a parent, or its rest pose relative to its parent."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid ""
-"Length of the bone's representation drawn in the editor's viewport in pixels."
-msgstr ""
-
-#: doc/classes/Bone2D.xml
-msgid ""
-"Rest transform of the bone. You can reset the node's transforms to this "
-"value using [method apply_rest]."
-msgstr ""
-
-#: doc/classes/BoneAttachment.xml
-msgid "A node that will attach to a bone."
-msgstr ""
-
-#: doc/classes/BoneAttachment.xml
-msgid ""
-"This node must be the child of a [Skeleton] node. You can then select a bone "
-"for this node to attach to. The BoneAttachment node will copy the transform "
-"of the selected bone."
-msgstr ""
-
-#: doc/classes/BoneAttachment.xml
-msgid "The name of the attached bone."
-msgstr ""
-
-#: doc/classes/bool.xml
-msgid "Boolean built-in type."
-msgstr ""
-
-#: doc/classes/bool.xml
-msgid ""
-"Boolean is a built-in type. There are two boolean values: [code]true[/code] "
-"and [code]false[/code]. You can think of it as a switch with on or off (1 or "
-"0) setting. Booleans are used in programming for logic in condition "
-"statements, like [code]if[/code] statements.\n"
-"Booleans can be directly used in [code]if[/code] statements. The code below "
-"demonstrates this on the [code]if can_shoot:[/code] line. You don't need to "
-"use [code]== true[/code], you only need [code]if can_shoot:[/code]. "
-"Similarly, use [code]if not can_shoot:[/code] rather than [code]== false[/"
-"code].\n"
-"[codeblock]\n"
-"var can_shoot = true\n"
-"\n"
-"func shoot():\n"
-"    if can_shoot:\n"
-"        pass # Perform shooting actions here.\n"
-"[/codeblock]\n"
-"The following code will only create a bullet if both conditions are met: "
-"action \"shoot\" is pressed and if [code]can_shoot[/code] is [code]true[/"
-"code].\n"
-"[b]Note:[/b] [code]Input.is_action_pressed(\"shoot\")[/code] is also a "
-"boolean that is [code]true[/code] when \"shoot\" is pressed and [code]false[/"
-"code] when \"shoot\" isn't pressed.\n"
-"[codeblock]\n"
-"var can_shoot = true\n"
-"\n"
-"func shoot():\n"
-"    if can_shoot and Input.is_action_pressed(\"shoot\"):\n"
-"        create_bullet()\n"
-"[/codeblock]\n"
-"The following code will set [code]can_shoot[/code] to [code]false[/code] and "
-"start a timer. This will prevent player from shooting until the timer runs "
-"out. Next [code]can_shoot[/code] will be set to [code]true[/code] again "
-"allowing player to shoot once again.\n"
-"[codeblock]\n"
-"var can_shoot = true\n"
-"onready var cool_down = $CoolDownTimer\n"
-"\n"
-"func shoot():\n"
-"    if can_shoot and Input.is_action_pressed(\"shoot\"):\n"
-"        create_bullet()\n"
-"        can_shoot = false\n"
-"        cool_down.start()\n"
-"\n"
-"func _on_CoolDownTimer_timeout():\n"
-"    can_shoot = true\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/bool.xml
-msgid ""
-"Cast an [int] value to a boolean value, this method will return [code]false[/"
-"code] if [code]0[/code] is passed in, and [code]true[/code] for all other "
-"ints."
-msgstr ""
-
-#: doc/classes/bool.xml
-msgid ""
-"Cast a [float] value to a boolean value, this method will return "
-"[code]false[/code] if [code]0.0[/code] is passed in, and [code]true[/code] "
-"for all other floats."
-msgstr ""
-
-#: doc/classes/bool.xml
-msgid ""
-"Cast a [String] value to a boolean value, this method will return "
-"[code]false[/code] if [code]\"\"[/code] is passed in, and [code]true[/code] "
-"for all non-empty strings.\n"
-"Examples: [code]bool(\"False\")[/code] returns [code]true[/code], "
-"[code]bool(\"\")[/code] returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid "Base class for box containers."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid ""
-"Arranges child controls vertically or horizontally, and rearranges the "
-"controls automatically when their minimum size changes."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid ""
-"Adds a control to the box as a spacer. If [code]true[/code], [code]begin[/"
-"code] will insert the spacer control in front of other children."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid ""
-"The alignment of the container's children (must be one of [constant "
-"ALIGN_BEGIN], [constant ALIGN_CENTER] or [constant ALIGN_END])."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid "Aligns children with the beginning of the container."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid "Aligns children with the center of the container."
-msgstr ""
-
-#: doc/classes/BoxContainer.xml
-msgid "Aligns children with the end of the container."
-msgstr ""
-
-#: doc/classes/BoxShape.xml
-msgid "Box shape resource."
-msgstr ""
-
-#: doc/classes/BoxShape.xml
-msgid "3D box shape that can be a child of a [PhysicsBody] or [Area]."
-msgstr ""
-
-#: doc/classes/BoxShape.xml doc/classes/CapsuleShape.xml
-#: doc/classes/ConcavePolygonShape.xml doc/classes/ConvexPolygonShape.xml
-#: doc/classes/CylinderShape.xml doc/classes/ProjectSettings.xml
-#: doc/classes/RigidBody.xml doc/classes/SphereShape.xml
-#: doc/classes/StaticBody.xml
-msgid "3D Physics Tests Demo"
-msgstr ""
-
-#: doc/classes/BoxShape.xml doc/classes/CollisionShape.xml
-#: modules/gridmap/doc_classes/GridMap.xml doc/classes/KinematicBody.xml
-#: doc/classes/Mesh.xml doc/classes/MeshInstance.xml
-#: doc/classes/MeshLibrary.xml
-msgid "3D Kinematic Character Demo"
-msgstr ""
-
-#: doc/classes/BoxShape.xml
-msgid ""
-"The box's half extents. The width, height and depth of this shape is twice "
-"the half extents."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Standard themed Button."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"Button is the standard themed button. It can contain text and an icon, and "
-"will display them according to the current [Theme].\n"
-"[b]Example of creating a button and assigning an action when pressed by code:"
-"[/b]\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    var button = Button.new()\n"
-"    button.text = \"Click me\"\n"
-"    button.connect(\"pressed\", self, \"_button_pressed\")\n"
-"    add_child(button)\n"
-"\n"
-"func _button_pressed():\n"
-"    print(\"Hello world!\")\n"
-"[/codeblock]\n"
-"Buttons (like all Control nodes) can also be created in the editor, but some "
-"situations may require creating them from code.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node.\n"
-"[b]Note:[/b] Buttons do not interpret touch input and therefore don't "
-"support multitouch, since mouse emulation can only press one button at a "
-"given time. Use [TouchScreenButton] for buttons that trigger gameplay "
-"movement or actions, as [TouchScreenButton] supports multitouch."
-msgstr ""
-
-#: doc/classes/Button.xml doc/classes/Dictionary.xml
-#: doc/classes/GridContainer.xml doc/classes/OS.xml
-#: doc/classes/PoolStringArray.xml doc/classes/ProjectSettings.xml
-#: doc/classes/ResourceLoader.xml doc/classes/RichTextLabel.xml
-msgid "OS Test Demo"
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"Text alignment policy for the button's text, use one of the [enum TextAlign] "
-"constants."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"When this property is enabled, text that is too large to fit the button is "
-"clipped, when disabled the Button will always be wide enough to hold the "
-"text."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"When enabled, the button's icon will expand/shrink to fit the button's size "
-"while keeping its aspect."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Flat buttons don't display decoration."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"Button's icon, if text is present the icon will be placed before the text.\n"
-"To edit margin and spacing of the icon, use [code]hseparation[/code] theme "
-"property of [Button] and [code]content_margin_*[/code] properties of the "
-"used [StyleBox]es."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"Specifies if the icon should be aligned to the left, right, or center of a "
-"button. Uses the same [enum TextAlign] constants as the text alignment. If "
-"centered, text will draw on top of the icon."
-msgstr ""
-
-#: doc/classes/Button.xml doc/classes/LinkButton.xml
-msgid "The button's text that will be displayed inside the button's area."
-msgstr "Die Beschriftung, die auf der Schaltfläche eingeblendet wird."
-
-#: doc/classes/Button.xml
-msgid "Align the text to the left."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Align the text to the center."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Align the text to the right."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Default text [Color] of the [Button]."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Text [Color] used when the [Button] is disabled."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"Text [Color] used when the [Button] is focused. Only replaces the normal "
-"text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Text [Color] used when the [Button] is being hovered."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Text [Color] used when the [Button] is being pressed."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "The horizontal space between [Button]'s icon and text."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "[Font] of the [Button]'s text."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "[StyleBox] used when the [Button] is disabled."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid ""
-"[StyleBox] used when the [Button] is focused. It is displayed over the "
-"current [StyleBox], so using [StyleBoxEmpty] will just disable the focus "
-"visual effect."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "[StyleBox] used when the [Button] is being hovered."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "Default [StyleBox] for the [Button]."
-msgstr ""
-
-#: doc/classes/Button.xml
-msgid "[StyleBox] used when the [Button] is being pressed."
-msgstr ""
-
-#: doc/classes/ButtonGroup.xml
-msgid "Group of Buttons."
-msgstr ""
-
-#: doc/classes/ButtonGroup.xml
-msgid ""
-"Group of [Button]. All direct and indirect children buttons become radios. "
-"Only one allows being pressed.\n"
-"[member BaseButton.toggle_mode] should be [code]true[/code]."
-msgstr ""
-
-#: doc/classes/ButtonGroup.xml
-msgid ""
-"Returns an [Array] of [Button]s who have this as their [ButtonGroup] (see "
-"[member BaseButton.group])."
-msgstr ""
-
-#: doc/classes/ButtonGroup.xml
-msgid "Returns the current pressed button."
-msgstr ""
-
-#: doc/classes/ButtonGroup.xml
-#, fuzzy
-msgid "Emitted when one of the buttons of the group is pressed."
-msgstr ""
-"Wird ausgegeben, wenn der Dialog akzeptiert wird, d. h. die Schaltfläche OK "
-"gedrückt wird."
-
-#: doc/classes/CallbackTweener.xml
-msgid "Calls the specified method after optional delay."
-msgstr ""
-
-#: doc/classes/CallbackTweener.xml
-msgid ""
-"[CallbackTweener] is used to call a method in a tweening sequence. See "
-"[method SceneTreeTween.tween_callback] for more usage information.\n"
-"[b]Note:[/b] [method SceneTreeTween.tween_callback] is the only correct way "
-"to create [CallbackTweener]. Any [CallbackTweener] created manually will not "
-"function correctly."
-msgstr ""
-
-#: doc/classes/CallbackTweener.xml
-msgid ""
-"Makes the callback call delayed by given time in seconds. Example:\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween()\n"
-"tween.tween_callback(queue_free).set_delay(2) #this will call queue_free() "
-"after 2 seconds\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid "Camera node, displays from a point of view."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Camera is a special node that displays what is visible from its current "
-"location. Cameras register themselves in the nearest [Viewport] node (when "
-"ascending the tree). Only one camera can be active per viewport. If no "
-"viewport is available ascending the tree, the camera will register in the "
-"global viewport. In other words, a camera just provides 3D display "
-"capabilities to a [Viewport], and, without one, a scene registered in that "
-"[Viewport] (or higher viewports) can't be displayed."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"If this is the current camera, remove it from being current. If "
-"[code]enable_next[/code] is [code]true[/code], request to make the next "
-"camera current, if any."
-msgstr ""
-
-#: doc/classes/Camera.xml
-#, fuzzy
-msgid "Returns the camera's RID from the [VisualServer]."
-msgstr "Liefert die Fläche des [Rect2i]."
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns the transform of the camera plus the vertical ([member v_offset]) "
-"and horizontal ([member h_offset]) offsets; and any other adjustments made "
-"to the position and orientation of the camera by subclassed cameras such as "
-"[ClippedCamera], [InterpolatedCamera] and [ARVRCamera]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns [code]true[/code] if the given [code]layer[/code] in the [member "
-"cull_mask] is enabled, [code]false[/code] otherwise."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns the camera's frustum planes in world space units as an array of "
-"[Plane]s in the following order: near, far, left, top, right, bottom. Not to "
-"be confused with [member frustum_offset]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns [code]true[/code] if the given position is behind the camera.\n"
-"[b]Note:[/b] A position which returns [code]false[/code] may still be "
-"outside the camera's field of view."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Makes this camera the current camera for the [Viewport] (see class "
-"description). If the camera node is outside the scene tree, it will attempt "
-"to become current once it's added."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns a normal vector from the screen point location directed along the "
-"camera. Orthogonal cameras are normalized. Perspective cameras account for "
-"perspective, screen width/height, etc."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns the 3D point in world space that maps to the given 2D coordinate in "
-"the [Viewport] rectangle on a plane that is the given [code]z_depth[/code] "
-"distance into the scene away from the camera."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns a normal vector in world space, that is the result of projecting a "
-"point on the [Viewport] rectangle by the inverse camera projection. This is "
-"useful for casting rays in the form of (origin, normal) for object "
-"intersection or picking."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns a 3D position in world space, that is the result of projecting a "
-"point on the [Viewport] rectangle by the inverse camera projection. This is "
-"useful for casting rays in the form of (origin, normal) for object "
-"intersection or picking."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Enables or disables the given [code]layer[/code] in the [member cull_mask]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Sets the camera projection to frustum mode (see [constant "
-"PROJECTION_FRUSTUM]), by specifying a [code]size[/code], an [code]offset[/"
-"code], and the [code]z_near[/code] and [code]z_far[/code] clip planes in "
-"world space units. See also [member frustum_offset]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Sets the camera projection to orthogonal mode (see [constant "
-"PROJECTION_ORTHOGONAL]), by specifying a [code]size[/code], and the "
-"[code]z_near[/code] and [code]z_far[/code] clip planes in world space units. "
-"(As a hint, 2D games often use this projection, with values specified in "
-"pixels.)"
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Sets the camera projection to perspective mode (see [constant "
-"PROJECTION_PERSPECTIVE]), by specifying a [code]fov[/code] (field of view) "
-"angle in degrees, and the [code]z_near[/code] and [code]z_far[/code] clip "
-"planes in world space units."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Returns the 2D coordinate in the [Viewport] rectangle that maps to the given "
-"3D point in world space.\n"
-"[b]Note:[/b] When using this to position GUI elements over a 3D viewport, "
-"use [method is_position_behind] to prevent them from appearing if the 3D "
-"point is behind the camera:\n"
-"[codeblock]\n"
-"# This code block is part of a script that inherits from Spatial.\n"
-"# `control` is a reference to a node inheriting from Control.\n"
-"control.visible = not get_viewport().get_camera()."
-"is_position_behind(global_transform.origin)\n"
-"control.rect_position = get_viewport().get_camera()."
-"unproject_position(global_transform.origin)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The culling mask that describes which 3D render layers are rendered by this "
-"camera."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"If [code]true[/code], the ancestor [Viewport] is currently using this "
-"camera.\n"
-"If multiple cameras are in the scene, one will always be made current. For "
-"example, if two [Camera] nodes are present in the scene and only one is "
-"current, setting one camera's [member current] to [code]false[/code] will "
-"cause the other camera to be made current."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"If not [constant DOPPLER_TRACKING_DISABLED], this camera will simulate the "
-"[url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/url] for "
-"objects changed in particular [code]_process[/code] methods. The Doppler "
-"effect is only simulated for [AudioStreamPlayer3D] nodes that have [member "
-"AudioStreamPlayer3D.doppler_tracking] set to a value other than [constant "
-"AudioStreamPlayer3D.DOPPLER_TRACKING_DISABLED].\n"
-"[b]Note:[/b] To toggle the Doppler effect preview in the editor, use the "
-"Perspective menu in the top-left corner of the 3D viewport and toggle "
-"[b]Enable Doppler[/b]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid "The [Environment] to use for this camera."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The distance to the far culling boundary for this camera relative to its "
-"local Z axis."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The camera's field of view angle (in degrees). Only applicable in "
-"perspective mode. Since [member keep_aspect] locks one axis, [code]fov[/"
-"code] sets the other axis' field of view angle.\n"
-"For reference, the default vertical field of view value ([code]70.0[/code]) "
-"is equivalent to a horizontal FOV of:\n"
-"- ~86.07 degrees in a 4:3 viewport\n"
-"- ~96.50 degrees in a 16:10 viewport\n"
-"- ~102.45 degrees in a 16:9 viewport\n"
-"- ~117.06 degrees in a 21:9 viewport"
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The camera's frustum offset. This can be changed from the default to create "
-"\"tilted frustum\" effects such as [url=https://zdoom.org/wiki/Y-shearing]Y-"
-"shearing[/url].\n"
-"[b]Note:[/b] Only effective if [member projection] is [constant "
-"PROJECTION_FRUSTUM]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid "The horizontal (X) offset of the camera viewport."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The axis to lock during [member fov]/[member size] adjustments. Can be "
-"either [constant KEEP_WIDTH] or [constant KEEP_HEIGHT]."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The distance to the near culling boundary for this camera relative to its "
-"local Z axis."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The camera's projection mode. In [constant PROJECTION_PERSPECTIVE] mode, "
-"objects' Z distance from the camera's local space scales their perceived "
-"size."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"The camera's size in meters measured as the diameter of the width or height, "
-"depending on [member keep_aspect]. Only applicable in orthogonal and frustum "
-"modes."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid "The vertical (Y) offset of the camera viewport."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Perspective projection. Objects on the screen becomes smaller when they are "
-"far away."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Orthogonal projection, also known as orthographic projection. Objects remain "
-"the same size on the screen no matter how far away they are."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Frustum projection. This mode allows adjusting [member frustum_offset] to "
-"create \"tilted frustum\" effects."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Preserves the horizontal aspect ratio; also known as Vert- scaling. This is "
-"usually the best option for projects running in portrait mode, as taller "
-"aspect ratios will benefit from a wider vertical FOV."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Preserves the vertical aspect ratio; also known as Hor+ scaling. This is "
-"usually the best option for projects running in landscape mode, as wider "
-"aspect ratios will automatically benefit from a wider horizontal FOV."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Disables [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/"
-"url] simulation (default)."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Simulate [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/"
-"url] by tracking positions of objects that are changed in [code]_process[/"
-"code]. Changes in the relative velocity of this camera compared to those "
-"objects affect how audio is perceived (changing the audio's [member "
-"AudioStreamPlayer3D.pitch_scale])."
-msgstr ""
-
-#: doc/classes/Camera.xml
-msgid ""
-"Simulate [url=https://en.wikipedia.org/wiki/Doppler_effect]Doppler effect[/"
-"url] by tracking positions of objects that are changed in "
-"[code]_physics_process[/code]. Changes in the relative velocity of this "
-"camera compared to those objects affect how audio is perceived (changing the "
-"audio's [member AudioStreamPlayer3D.pitch_scale])."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid "Camera node for 2D scenes."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Camera node for 2D scenes. It forces the screen (current layer) to scroll "
-"following this node. This makes it easier (and faster) to program scrollable "
-"scenes than manually changing the position of [CanvasItem]-based nodes.\n"
-"This node is intended to be a simple helper to get things going quickly, but "
-"more functionality may be desired to change how the camera works. To make "
-"your own custom camera node, inherit it from [Node2D] and change the "
-"transform of the canvas by setting [member Viewport.canvas_transform] in "
-"[Viewport] (you can obtain the current [Viewport] by using [method Node."
-"get_viewport]).\n"
-"Note that the [Camera2D] node's [code]position[/code] doesn't represent the "
-"actual position of the screen, which may differ due to applied smoothing or "
-"limits. You can use [method get_camera_screen_center] to get the real "
-"position."
-msgstr ""
-
-#: doc/classes/Camera2D.xml doc/classes/TileMap.xml doc/classes/TileSet.xml
-msgid "2D Isometric Demo"
-msgstr ""
-
-#: doc/classes/Camera2D.xml doc/classes/Environment.xml
-#: doc/classes/WorldEnvironment.xml
-msgid "2D HDR Demo"
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid "Aligns the camera to the tracked node."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Removes any [Camera2D] from the ancestor [Viewport]'s internal currently-"
-"assigned camera."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid "Forces the camera to update scroll immediately."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Returns the camera's [code]position[/code] (the tracked point the camera "
-"attempts to follow), relative to the origin.\n"
-"[b]Note:[/b] The returned value is not the same as [member Node2D.position] "
-"or [member Node2D.global_position], as it is affected by the [code]drag[/"
-"code] properties."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Returns the location of the [Camera2D]'s screen-center, relative to the "
-"origin.\n"
-"[b]Note:[/b] The real [code]position[/code] of the camera may be different, "
-"see [method get_camera_position]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Returns the specified margin. See also [member drag_margin_bottom], [member "
-"drag_margin_top], [member drag_margin_left], and [member drag_margin_right]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Returns the specified camera limit. See also [member limit_bottom], [member "
-"limit_top], [member limit_left], and [member limit_right]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Make this the current 2D camera for the scene (viewport and layer), in case "
-"there are many cameras in the scene."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Sets the camera's position immediately to its current smoothing "
-"destination.\n"
-"This method has no effect if [member smoothing_enabled] is [code]false[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Sets the specified margin. See also [member drag_margin_bottom], [member "
-"drag_margin_top], [member drag_margin_left], and [member drag_margin_right]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Sets the specified camera limit. See also [member limit_bottom], [member "
-"limit_top], [member limit_left], and [member limit_right]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid "The Camera2D's anchor point. See [enum AnchorMode] constants."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], the camera is the active camera for the current scene. "
-"Only one camera can be current, so setting a different camera [code]current[/"
-"code] will disable this one."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The custom [Viewport] node attached to the [Camera2D]. If [code]null[/code] "
-"or not a [Viewport], uses the default viewport instead."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Bottom margin needed to drag the camera. A value of [code]1[/code] makes the "
-"camera move only when reaching the edge of the screen."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], the camera only moves when reaching the horizontal "
-"drag margins. If [code]false[/code], the camera moves horizontally "
-"regardless of margins."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Left margin needed to drag the camera. A value of [code]1[/code] makes the "
-"camera move only when reaching the edge of the screen."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Right margin needed to drag the camera. A value of [code]1[/code] makes the "
-"camera move only when reaching the edge of the screen."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Top margin needed to drag the camera. A value of [code]1[/code] makes the "
-"camera move only when reaching the edge of the screen."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], the camera only moves when reaching the vertical drag "
-"margins. If [code]false[/code], the camera moves vertically regardless of "
-"margins."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], draws the camera's drag margin rectangle in the editor."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], draws the camera's limits rectangle in the editor."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], draws the camera's screen rectangle in the editor."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Bottom scroll limit in pixels. The camera stops moving when reaching this "
-"value."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Left scroll limit in pixels. The camera stops moving when reaching this "
-"value."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Right scroll limit in pixels. The camera stops moving when reaching this "
-"value."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], the camera smoothly stops when reaches its limits.\n"
-"This property has no effect if [member smoothing_enabled] is [code]false[/"
-"code].\n"
-"[b]Note:[/b] To immediately update the camera's position to be within limits "
-"without smoothing, even with this setting enabled, invoke [method "
-"reset_smoothing]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Top scroll limit in pixels. The camera stops moving when reaching this value."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The camera's offset, useful for looking around or camera shake animations."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The horizontal offset of the camera, relative to the drag margins.\n"
-"[b]Note:[/b] Offset H is used only to force offset relative to margins. It's "
-"not updated in any way if drag margins are enabled and can be used to set "
-"initial offset."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The vertical offset of the camera, relative to the drag margins.\n"
-"[b]Note:[/b] Used the same as [member offset_h]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid "The camera's process callback. See [enum Camera2DProcessMode]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-#, fuzzy
-msgid "If [code]true[/code], the camera view rotates with the target."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"If [code]true[/code], the camera smoothly moves towards the target at "
-"[member smoothing_speed]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"Speed in pixels per second of the camera's smoothing effect when [member "
-"smoothing_enabled] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The camera's zoom relative to the viewport. Values larger than "
-"[code]Vector2(1, 1)[/code] zoom out and smaller values zoom in. For an "
-"example, use [code]Vector2(0.5, 0.5)[/code] for a 2× zoom-in, and "
-"[code]Vector2(4, 4)[/code] for a 4× zoom-out."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The camera's position is fixed so that the top-left corner is always at the "
-"origin."
-msgstr ""
-
-#: doc/classes/Camera2D.xml
-msgid ""
-"The camera's position takes into account vertical/horizontal offsets and the "
-"screen size."
-msgstr ""
-
-#: doc/classes/Camera2D.xml doc/classes/ClippedCamera.xml
-#: doc/classes/InterpolatedCamera.xml
-msgid "The camera updates with the [code]_physics_process[/code] callback."
-msgstr ""
-
-#: doc/classes/Camera2D.xml doc/classes/ClippedCamera.xml
-#: doc/classes/InterpolatedCamera.xml
-msgid "The camera updates with the [code]_process[/code] callback."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-msgid ""
-"A camera feed gives you access to a single physical camera attached to your "
-"device."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-msgid ""
-"A camera feed gives you access to a single physical camera attached to your "
-"device. When enabled, Godot will start capturing frames from the camera "
-"which can then be used. See also [CameraServer].\n"
-"[b]Note:[/b] Many cameras will return YCbCr images which are split into two "
-"textures and need to be combined in a shader. Godot does this automatically "
-"for you if you set the environment to show the camera image in the "
-"background."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-#, fuzzy
-msgid "Returns the unique ID for this feed."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/CameraFeed.xml
-#, fuzzy
-msgid "Returns the camera's name."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/CameraFeed.xml
-#, fuzzy
-msgid "Returns the position of camera on the device."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/CameraFeed.xml
-#, fuzzy
-msgid "If [code]true[/code], the feed is active."
-msgstr "Falls [code]wahr[/code] wir Audio gerade abgespielt."
-
-#: doc/classes/CameraFeed.xml
-msgid "The transform applied to the camera's image."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-#, fuzzy
-msgid "No image set for the feed."
-msgstr "Kein Hinweis auf die bearbeitete Eigenschaft."
-
-#: doc/classes/CameraFeed.xml
-msgid "Feed supplies RGB images."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-msgid "Feed supplies YCbCr images that need to be converted to RGB."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-msgid ""
-"Feed supplies separate Y and CbCr images that need to be combined and "
-"converted to RGB."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-msgid "Unspecified position."
-msgstr "Nicht spezifizierte Position."
-
-#: doc/classes/CameraFeed.xml
-msgid "Camera is mounted at the front of the device."
-msgstr ""
-
-#: doc/classes/CameraFeed.xml
-msgid "Camera is mounted at the back of the device."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "Server keeping track of different cameras accessible in Godot."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid ""
-"The [CameraServer] keeps track of different cameras accessible in Godot. "
-"These are external cameras such as webcams or the cameras on your phone.\n"
-"It is notably used to provide AR modules with a video feed from the camera.\n"
-"[b]Note:[/b] This class is currently only implemented on macOS and iOS. On "
-"other platforms, no [CameraFeed]s will be available."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "Adds the camera [code]feed[/code] to the camera server."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "Returns an array of [CameraFeed]s."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-#, fuzzy
-msgid ""
-"Returns the [CameraFeed] corresponding to the camera with the given "
-"[code]index[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/CameraServer.xml
-msgid "Returns the number of [CameraFeed]s registered."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-#, fuzzy
-msgid "Removes the specified camera [code]feed[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/CameraServer.xml
-msgid "Emitted when a [CameraFeed] is added (e.g. a webcam is plugged in)."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "Emitted when a [CameraFeed] is removed (e.g. a webcam is unplugged)."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "The RGBA camera image."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "The [url=https://en.wikipedia.org/wiki/YCbCr]YCbCr[/url] camera image."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "The Y component camera image."
-msgstr ""
-
-#: doc/classes/CameraServer.xml
-msgid "The CbCr component camera image."
-msgstr ""
-
-#: doc/classes/CameraTexture.xml
-msgid "Texture provided by a [CameraFeed]."
-msgstr ""
-
-#: doc/classes/CameraTexture.xml
-msgid ""
-"This texture gives access to the camera texture provided by a [CameraFeed].\n"
-"[b]Note:[/b] Many cameras supply YCbCr images which need to be converted in "
-"a shader."
-msgstr ""
-
-#: doc/classes/CameraTexture.xml
-msgid "The ID of the [CameraFeed] for which we want to display the image."
-msgstr ""
-
-#: doc/classes/CameraTexture.xml
-msgid ""
-"Convenience property that gives access to the active property of the "
-"[CameraFeed]."
-msgstr ""
-
-#: doc/classes/CameraTexture.xml
-msgid ""
-"Which image within the [CameraFeed] we want access to, important if the "
-"camera image is split in a Y and CbCr component."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Base class of anything 2D."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Base class of anything 2D. Canvas items are laid out in a tree; children "
-"inherit and extend their parent's transform. [CanvasItem] is extended by "
-"[Control] for anything GUI-related, and by [Node2D] for anything related to "
-"the 2D engine.\n"
-"Any [CanvasItem] can draw. For this, [method update] is called by the "
-"engine, then [constant NOTIFICATION_DRAW] will be received on idle time to "
-"request redraw. Because of this, canvas items don't need to be redrawn on "
-"every frame, improving the performance significantly. Several functions for "
-"drawing on the [CanvasItem] are provided (see [code]draw_*[/code] "
-"functions). However, they can only be used inside [method _draw], its "
-"corresponding [method Object._notification] or methods connected to the "
-"[signal draw] signal.\n"
-"Canvas items are drawn in tree order. By default, children are on top of "
-"their parents so a root [CanvasItem] will be drawn behind everything. This "
-"behavior can be changed on a per-item basis.\n"
-"A [CanvasItem] can also be hidden, which will also hide its children. It "
-"provides many ways to change parameters such as modulation (for itself and "
-"its children) and self modulation (only for itself), as well as its blend "
-"mode.\n"
-"Ultimately, a transform notification can be requested, which will notify the "
-"node that its global position changed in case the parent tree changed.\n"
-"[b]Note:[/b] Unless otherwise specified, all methods that have angle "
-"parameters must have angles specified as [i]radians[/i]. To convert degrees "
-"to radians, use [method @GDScript.deg2rad]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/CanvasLayer.xml
-#: doc/classes/InputEvent.xml doc/classes/Viewport.xml
-msgid "Viewport and canvas transforms"
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/Control.xml doc/classes/Node2D.xml
-msgid "Custom drawing in 2D"
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Called when [CanvasItem] has been requested to redraw (when [method update] "
-"is called, either manually or by the engine).\n"
-"Corresponds to the [constant NOTIFICATION_DRAW] notification in [method "
-"Object._notification]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a unfilled arc between the given angles. The larger the value of "
-"[code]point_count[/code], the smoother the curve. See also [method "
-"draw_circle].\n"
-"[b]Note:[/b] Line drawing is not accelerated by batching if "
-"[code]antialiased[/code] is [code]true[/code].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent lines and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedRegularPolygon2D node. That node relies on a texture with custom "
-"mipmaps to perform antialiasing. 2D batching is also still supported with "
-"those antialiased lines."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a string character using a custom font. Returns the advance, depending "
-"on the character width and kerning with an optional next character."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a colored, filled circle. See also [method draw_arc], [method "
-"draw_polyline] and [method draw_polygon].\n"
-"[b]Note:[/b] Built-in antialiasing is not provided for [method draw_circle]. "
-"As a workaround, install the [url=https://github.com/godot-extended-"
-"libraries/godot-antialiased-line2d]Antialiased Line2D[/url] add-on then "
-"create an AntialiasedRegularPolygon2D node. That node relies on a texture "
-"with custom mipmaps to perform antialiasing."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a colored polygon of any amount of points, convex or concave. Unlike "
-"[method draw_polygon], a single color must be specified for the whole "
-"polygon.\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent polygons and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedPolygon2D node. That node relies on a texture with custom mipmaps "
-"to perform antialiasing."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a line from a 2D point to another, with a given color and width. It "
-"can be optionally antialiased. See also [method draw_multiline] and [method "
-"draw_polyline].\n"
-"[b]Note:[/b] Line drawing is not accelerated by batching if "
-"[code]antialiased[/code] is [code]true[/code].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent lines and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedLine2D node. That node relies on a texture with custom mipmaps to "
-"perform antialiasing. 2D batching is also still supported with those "
-"antialiased lines."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a [Mesh] in 2D, using the provided texture. See [MeshInstance2D] for "
-"related documentation."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws multiple disconnected lines with a uniform [code]color[/code]. When "
-"drawing large amounts of lines, this is faster than using individual [method "
-"draw_line] calls. To draw interconnected lines, use [method draw_polyline] "
-"instead.\n"
-"[b]Note:[/b] [code]width[/code] and [code]antialiased[/code] are currently "
-"not implemented and have no effect. As a workaround, install the "
-"[url=https://github.com/godot-extended-libraries/godot-antialiased-"
-"line2d]Antialiased Line2D[/url] add-on then create an AntialiasedLine2D "
-"node. That node relies on a texture with custom mipmaps to perform "
-"antialiasing. 2D batching is also still supported with those antialiased "
-"lines."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws multiple disconnected lines with a uniform [code]width[/code] and "
-"segment-by-segment coloring. Colors assigned to line segments match by index "
-"between [code]points[/code] and [code]colors[/code]. When drawing large "
-"amounts of lines, this is faster than using individual [method draw_line] "
-"calls. To draw interconnected lines, use [method draw_polyline_colors] "
-"instead.\n"
-"[b]Note:[/b] [code]width[/code] and [code]antialiased[/code] are currently "
-"not implemented and have no effect. As a workaround, install the "
-"[url=https://github.com/godot-extended-libraries/godot-antialiased-"
-"line2d]Antialiased Line2D[/url] add-on then create an AntialiasedLine2D "
-"node. That node relies on a texture with custom mipmaps to perform "
-"antialiasing. 2D batching is also still supported with those antialiased "
-"lines."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a [MultiMesh] in 2D with the provided texture. See "
-"[MultiMeshInstance2D] for related documentation."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a solid polygon of any amount of points, convex or concave. Unlike "
-"[method draw_colored_polygon], each point's color can be changed "
-"individually. See also [method draw_polyline] and [method "
-"draw_polyline_colors].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent polygons and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedPolygon2D node. That node relies on a texture with custom mipmaps "
-"to perform antialiasing."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws interconnected line segments with a uniform [code]color[/code] and "
-"[code]width[/code] and optional antialiasing. When drawing large amounts of "
-"lines, this is faster than using individual [method draw_line] calls. To "
-"draw disconnected lines, use [method draw_multiline] instead. See also "
-"[method draw_polygon].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent polygons and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedPolygon2D node. That node relies on a texture with custom mipmaps "
-"to perform antialiasing."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws interconnected line segments with a uniform [code]width[/code] and "
-"segment-by-segment coloring, and optional antialiasing. Colors assigned to "
-"line segments match by index between [code]points[/code] and [code]colors[/"
-"code]. When drawing large amounts of lines, this is faster than using "
-"individual [method draw_line] calls. To draw disconnected lines, use [method "
-"draw_multiline_colors] instead. See also [method draw_polygon].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent polygons and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedPolygon2D node. That node relies on a texture with custom mipmaps "
-"to perform antialiasing."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a custom primitive. 1 point for a point, 2 points for a line, 3 points "
-"for a triangle, and 4 points for a quad. If 0 points or more than 4 points "
-"are specified, nothing will be drawn and an error message will be printed. "
-"See also [method draw_line], [method draw_polyline], [method draw_polygon], "
-"and [method draw_rect]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a rectangle. If [code]filled[/code] is [code]true[/code], the "
-"rectangle will be filled with the [code]color[/code] specified. If "
-"[code]filled[/code] is [code]false[/code], the rectangle will be drawn as a "
-"stroke with the [code]color[/code] and [code]width[/code] specified. If "
-"[code]antialiased[/code] is [code]true[/code], the lines will attempt to "
-"perform antialiasing using OpenGL line smoothing.\n"
-"[b]Note:[/b] [code]width[/code] and [code]antialiased[/code] are only "
-"effective if [code]filled[/code] is [code]false[/code].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent polygons and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedPolygon2D node. That node relies on a texture with custom mipmaps "
-"to perform antialiasing."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Sets a custom transform for drawing via components. Anything drawn "
-"afterwards will be transformed by this."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Sets a custom transform for drawing via matrix. Anything drawn afterwards "
-"will be transformed by this."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws [code]text[/code] using the specified [code]font[/code] at the "
-"[code]position[/code] (bottom-left corner using the baseline of the font). "
-"The text will have its color multiplied by [code]modulate[/code]. If "
-"[code]clip_w[/code] is greater than or equal to 0, the text will be clipped "
-"if it exceeds the specified width.\n"
-"[b]Example using the default project font:[/b]\n"
-"[codeblock]\n"
-"# If using this method in a script that redraws constantly, move the\n"
-"# `default_font` declaration to a member variable assigned in `_ready()`\n"
-"# so the Control is only created once.\n"
-"var default_font = Control.new().get_font(\"font\")\n"
-"draw_string(default_font, Vector2(64, 64), \"Hello world\")\n"
-"[/codeblock]\n"
-"See also [method Font.draw]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Draws a styled rectangle."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Draws a texture at a given position."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a textured rectangle at a given position, optionally modulated by a "
-"color. If [code]transpose[/code] is [code]true[/code], the texture will have "
-"its X and Y coordinates swapped."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Draws a textured rectangle region at a given position, optionally modulated "
-"by a color. If [code]transpose[/code] is [code]true[/code], the texture will "
-"have its X and Y coordinates swapped."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/Spatial.xml
-msgid ""
-"Forces the transform to update. Transform changes in physics are not instant "
-"for performance reasons. Transforms are accumulated and then set. Use this "
-"if you need an up-to-date transform when doing physics operations."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the [RID] of the [World2D] canvas where this item is in."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the canvas item RID used by [VisualServer] for this item."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the transform matrix of this item's canvas."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns the mouse's position in the [CanvasLayer] that this [CanvasItem] is "
-"in using the coordinate system of the [CanvasLayer]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the global transform matrix of this item."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns the global transform matrix of this item in relation to the canvas."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns the mouse's position in this [CanvasItem] using the local coordinate "
-"system of this [CanvasItem]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the transform matrix of this item."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the viewport's boundaries as a [Rect2]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns this item's transform in relation to the viewport."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Returns the [World2D] where this item is in."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Hide the [CanvasItem] if it's currently visible. This is equivalent to "
-"setting [member visible] to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns [code]true[/code] if local transform notifications are communicated "
-"to children."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns [code]true[/code] if the node is set as top-level. See [method "
-"set_as_toplevel]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns [code]true[/code] if global transform notifications are communicated "
-"to children."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Returns [code]true[/code] if the node is present in the [SceneTree], its "
-"[member visible] property is [code]true[/code] and all its antecedents are "
-"also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree, and is consequently not drawn (see [method _draw])."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Assigns [code]screen_point[/code] as this node's new local transform."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Transformations issued by [code]event[/code]'s inputs are applied in local "
-"space instead of global space."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], this [CanvasItem] will [i]not[/"
-"i] inherit its transform from parent [CanvasItem]s. Its draw order will also "
-"be changed to make it draw on top of other [CanvasItem]s that are not set as "
-"top-level. The [CanvasItem] will effectively act as if it was placed as a "
-"child of a bare [Node]. See also [method is_set_as_toplevel]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], this node will receive "
-"[constant NOTIFICATION_LOCAL_TRANSFORM_CHANGED] when its local transform "
-"changes."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], this node will receive "
-"[constant NOTIFICATION_TRANSFORM_CHANGED] when its global transform changes."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Show the [CanvasItem] if it's currently hidden. This is equivalent to "
-"setting [member visible] to [code]true[/code]. For controls that inherit "
-"[Popup], the correct way to make them visible is to call one of the multiple "
-"[code]popup*()[/code] functions instead."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Queues the [CanvasItem] to redraw. During idle time, if [CanvasItem] is "
-"visible, [constant NOTIFICATION_DRAW] is sent and [method _draw] is called. "
-"This only occurs [b]once[/b] per frame, even if this method has been called "
-"multiple times."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"The rendering layers in which this [CanvasItem] responds to [Light2D] nodes."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "The material applied to textures on this [CanvasItem]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "The color applied to textures on this [CanvasItem]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"The color applied to textures on this [CanvasItem]. This is not inherited by "
-"children [CanvasItem]s."
-msgstr ""
-"Die Farbe die auf die Textur dieses [CanvasItem] angewendet wird. Dies wird "
-"nicht auf weitere [CanvasItem] vererbt."
-
-#: doc/classes/CanvasItem.xml
-msgid "If [code]true[/code], the object draws behind its parent."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "If [code]true[/code], the object draws on top of its parent."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"If [code]true[/code], the parent [CanvasItem]'s [member material] property "
-"is used as this one's material."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"If [code]true[/code], this [CanvasItem] is drawn. The node is only visible "
-"if all of its antecedents are visible as well (in other words, [method "
-"is_visible_in_tree] must return [code]true[/code]).\n"
-"[b]Note:[/b] For controls that inherit [Popup], the correct way to make them "
-"visible is to call one of the multiple [code]popup*()[/code] functions "
-"instead."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Emitted when the [CanvasItem] must redraw, [i]after[/i] the related "
-"[constant NOTIFICATION_DRAW] notification, and [i]before[/i] [method _draw] "
-"is called.\n"
-"[b]Note:[/b] Deferred connections do not allow drawing through the "
-"[code]draw_*[/code] methods."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Emitted when becoming hidden."
-msgstr "Gesendet wenn es versteckt wird."
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Emitted when the item's [Rect2] boundaries (position or size) have changed, "
-"or when an action is taking place that may have impacted these boundaries (e."
-"g. changing [member Sprite.texture])."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "Emitted when the visibility (hidden/visible) changes."
-msgstr "Gesendet wenn die Sichtbarkeit (versteckt/sichtbar) sich verändert."
-
-#: doc/classes/CanvasItem.xml doc/classes/CanvasItemMaterial.xml
-msgid ""
-"Mix blending mode. Colors are assumed to be independent of the alpha "
-"(opacity) value."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/CanvasItemMaterial.xml
-msgid "Additive blending mode."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/CanvasItemMaterial.xml
-msgid "Subtractive blending mode."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/CanvasItemMaterial.xml
-msgid "Multiplicative blending mode."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml doc/classes/CanvasItemMaterial.xml
-msgid ""
-"Mix blending mode. Colors are assumed to be premultiplied by the alpha "
-"(opacity) value."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"Disables blending mode. Colors including alpha are written as-is. Only "
-"applicable for render targets with a transparent background. No lighting "
-"will be applied."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"The [CanvasItem]'s global transform has changed. This notification is only "
-"received if enabled by [method set_notify_transform]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid ""
-"The [CanvasItem]'s local transform has changed. This notification is only "
-"received if enabled by [method set_notify_local_transform]."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-#, fuzzy
-msgid "The [CanvasItem] is requested to draw (see [method _draw])."
-msgstr "[CanvasItem] wird aufgefordert zu zeichnen."
-
-#: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem]'s visibility has changed."
-msgstr "[CanvasItem] Sichtbar/Unsichtbar Modus geändert."
-
-#: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] has entered the canvas."
-msgstr ""
-
-#: doc/classes/CanvasItem.xml
-msgid "The [CanvasItem] has exited the canvas."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid "A material for [CanvasItem]s."
-msgstr "Ein Material für [CanvasItem]."
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid ""
-"[CanvasItemMaterial]s provide a means of modifying the textures associated "
-"with a CanvasItem. They specialize in describing blend and lighting "
-"behaviors for textures. Use a [ShaderMaterial] to more fully customize a "
-"material's interactions with a [CanvasItem]."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid ""
-"The manner in which a material's rendering is applied to underlying textures."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid "The manner in which material reacts to lighting."
-msgstr "Die Art wie ein Material auf Licht reagiert."
-
-#: doc/classes/CanvasItemMaterial.xml
-#, fuzzy
-msgid ""
-"The number of columns in the spritesheet assigned as [Texture] for a "
-"[Particles2D] or [CPUParticles2D].\n"
-"[b]Note:[/b] This property is only used and visible in the editor if [member "
-"particles_animation] is [code]true[/code]."
-msgstr ""
-"Die Anzahl der Spalten in dem Spritesheet sind wie folgt zugewiesen: "
-"[Texture2D] für ein [GPUParticles2D] oder [CPUParticles2D].\n"
-"[b]Note:[/b] Dieses Merkmal wird nur im Editor genutzt und ist nur dort "
-"sichtbar wenn [member particles_animation] [code]true[/code] ist."
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid ""
-"If [code]true[/code], the particles animation will loop.\n"
-"[b]Note:[/b] This property is only used and visible in the editor if [member "
-"particles_animation] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-#, fuzzy
-msgid ""
-"The number of rows in the spritesheet assigned as [Texture] for a "
-"[Particles2D] or [CPUParticles2D].\n"
-"[b]Note:[/b] This property is only used and visible in the editor if [member "
-"particles_animation] is [code]true[/code]."
-msgstr ""
-"Die Anzahl der Spalten in dem Spritesheet sind wie folgt zugewiesen: "
-"[Texture2D] für ein [GPUParticles2D] oder [CPUParticles2D].\n"
-"[b]Note:[/b] Dieses Merkmal wird nur im Editor genutzt und ist nur dort "
-"sichtbar wenn [member particles_animation] [code]true[/code] ist."
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid ""
-"If [code]true[/code], enable spritesheet-based animation features when "
-"assigned to [Particles2D] and [CPUParticles2D] nodes. The [member "
-"ParticlesMaterial.anim_speed] or [member CPUParticles2D.anim_speed] should "
-"also be set to a positive value for the animation to play.\n"
-"This property (and other [code]particles_anim_*[/code] properties that "
-"depend on it) has no effect on other types of nodes."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid ""
-"Render the material using both light and non-light sensitive material "
-"properties."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid "Render the material as if there were no light."
-msgstr ""
-
-#: doc/classes/CanvasItemMaterial.xml
-msgid "Render the material as if there were only light."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "Canvas drawing layer."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"Canvas drawing layer. [CanvasItem] nodes that are direct or indirect "
-"children of a [CanvasLayer] will be drawn in that layer. The layer is a "
-"numeric index that defines the draw order. The default 2D scene renders with "
-"index 0, so a [CanvasLayer] with index -1 will be drawn below, and one with "
-"index 1 will be drawn above. This is very useful for HUDs (in layer 1+ or "
-"above), or backgrounds (in layer -1 or below)."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "Canvas layers"
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "Returns the RID of the canvas used by this layer."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"Hides any [CanvasItem] under this [CanvasLayer]. This is equivalent to "
-"setting [member visible] to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"Shows any [CanvasItem] under this [CanvasLayer]. This is equivalent to "
-"setting [member visible] to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"The custom [Viewport] node assigned to the [CanvasLayer]. If [code]null[/"
-"code], uses the default viewport instead."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"If enabled, the [CanvasLayer] will use the viewport's transform, so it will "
-"move when camera moves instead of being anchored in a fixed position on the "
-"screen.\n"
-"Together with [member follow_viewport_scale] it can be used for a pseudo 3D "
-"effect."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"Scales the layer when using [member follow_viewport_enable]. Layers moving "
-"into the foreground should have increasing scales, while layers moving into "
-"the background should have decreasing scales."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "Layer index for draw order. Lower values are drawn first."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "The layer's base offset."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "The layer's rotation in radians."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "The layer's rotation in degrees."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "The layer's scale."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid "The layer's transform."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-msgid ""
-"If [code]false[/code], any [CanvasItem] under this [CanvasLayer] will be "
-"hidden.\n"
-"Unlike [member CanvasItem.visible], visibility of a [CanvasLayer] isn't "
-"propagated to underlying layers."
-msgstr ""
-
-#: doc/classes/CanvasLayer.xml
-#, fuzzy
-msgid "Emitted when visibility of the layer is changed. See [member visible]."
-msgstr "Gesendet wenn die Sichtbarkeit (versteckt/sichtbar) sich verändert."
-
-#: doc/classes/CanvasModulate.xml
-msgid "Tint the entire canvas."
-msgstr ""
-
-#: doc/classes/CanvasModulate.xml
-msgid ""
-"[CanvasModulate] tints the canvas elements using its assigned [member color]."
-msgstr ""
-
-#: doc/classes/CanvasModulate.xml
-msgid "The tint color to apply."
-msgstr ""
-
-#: doc/classes/CapsuleMesh.xml
-msgid "Class representing a capsule-shaped [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/CapsuleMesh.xml
-msgid ""
-"Height of the middle cylindrical part of the capsule (without the "
-"hemispherical ends).\n"
-"[b]Note:[/b] The capsule's total height is equal to [member mid_height] + 2 "
-"* [member radius]."
-msgstr ""
-
-#: doc/classes/CapsuleMesh.xml
-msgid "Number of radial segments on the capsule mesh."
-msgstr ""
-
-#: doc/classes/CapsuleMesh.xml
-msgid "Radius of the capsule mesh."
-msgstr ""
-
-#: doc/classes/CapsuleMesh.xml
-msgid "Number of rings along the height of the capsule."
-msgstr ""
-
-#: doc/classes/CapsuleShape.xml
-msgid "Capsule shape for collisions."
-msgstr ""
-
-#: doc/classes/CapsuleShape.xml doc/classes/CapsuleShape2D.xml
-msgid "The capsule's height."
-msgstr ""
-
-#: doc/classes/CapsuleShape.xml doc/classes/CapsuleShape2D.xml
-msgid "The capsule's radius."
-msgstr ""
-
-#: doc/classes/CapsuleShape2D.xml
-msgid "Capsule shape for 2D collisions."
-msgstr ""
-
-#: doc/classes/CenterContainer.xml
-msgid "Keeps children controls centered."
-msgstr ""
-
-#: doc/classes/CenterContainer.xml
-msgid ""
-"CenterContainer keeps children controls centered. This container keeps all "
-"children to their minimum size, in the center."
-msgstr ""
-
-#: doc/classes/CenterContainer.xml
-msgid ""
-"If [code]true[/code], centers children relative to the [CenterContainer]'s "
-"top left corner."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"Controls how an individual character will be displayed in a [RichTextEffect]."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"By setting various properties on this object, you can control how individual "
-"characters will be displayed in a [RichTextEffect]."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"The index of the current character (starting from 0) for the "
-"[RichTextLabel]'s BBCode text. Setting this property won't affect drawing."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"The Unicode codepoint the character will use. This only affects non-"
-"whitespace characters. [method @GDScript.ord] can be useful here. For "
-"example, the following will replace all characters with asterisks:\n"
-"[codeblock]\n"
-"# `char_fx` is the CharFXTransform parameter from `_process_custom_fx()`.\n"
-"# See the RichTextEffect documentation for details.\n"
-"char_fx.character = ord(\"*\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid "The color the character will be drawn with."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"The time elapsed since the [RichTextLabel] was added to the scene tree (in "
-"seconds). Time stops when the [RichTextLabel] is paused (see [member Node."
-"pause_mode]). Resets when the text in the [RichTextLabel] is changed.\n"
-"[b]Note:[/b] Time still passes while the [RichTextLabel] is hidden."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"Contains the arguments passed in the opening BBCode tag. By default, "
-"arguments are strings; if their contents match a type such as [bool], [int] "
-"or [float], they will be converted automatically. Color codes in the form "
-"[code]#rrggbb[/code] or [code]#rgb[/code] will be converted to an opaque "
-"[Color]. String arguments may not contain spaces, even if they're quoted. If "
-"present, quotes will also be present in the final string.\n"
-"For example, the opening BBCode tag [code][example foo=hello bar=true baz=42 "
-"color=#ffffff][/code] will map to the following [Dictionary]:\n"
-"[codeblock]\n"
-"{\"foo\": \"hello\", \"bar\": true, \"baz\": 42, \"color\": Color(1, 1, 1, "
-"1)}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid "The position offset the character will be drawn with (in pixels)."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"The index of the current character (starting from 0) for this "
-"[RichTextEffect] custom block. Setting this property won't affect drawing."
-msgstr ""
-
-#: doc/classes/CharFXTransform.xml
-msgid ""
-"If [code]true[/code], the character will be drawn. If [code]false[/code], "
-"the character will be hidden. Characters around hidden characters will "
-"reflow to take the space of hidden characters. If this is not desired, set "
-"their [member color] to [code]Color(1, 1, 1, 0)[/code] instead."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "Binary choice user interface widget. See also [CheckButton]."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"A checkbox allows the user to make a binary choice (choosing only one of two "
-"possible options). It's similar to [CheckButton] in functionality, but it "
-"has a different appearance. To follow established UX patterns, it's "
-"recommended to use CheckBox when toggling it has [b]no[/b] immediate effect "
-"on something. For instance, it should be used when toggling it will only do "
-"something once a confirmation button is pressed.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The [CheckBox] text's font color."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The [CheckBox] text's font color when it's disabled."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The [CheckBox] text's font color when it's focused. Only replaces the normal "
-"text color of the checkbox. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The [CheckBox] text's font color when it's hovered."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The [CheckBox] text's font color when it's hovered and pressed."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The [CheckBox] text's font color when it's pressed."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The vertical offset used when rendering the check icons (in pixels)."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The separation between the check icon and the text (in pixels)."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The [Font] to use for the [CheckBox] text."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The check icon to display when the [CheckBox] is checked."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The check icon to display when the [CheckBox] is checked and disabled."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"If the [CheckBox] is configured as a radio button, the icon to display when "
-"the [CheckBox] is checked."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"If the [CheckBox] is configured as a radio button, the icon to display when "
-"the [CheckBox] is unchecked."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid "The check icon to display when the [CheckBox] is unchecked."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The check icon to display when the [CheckBox] is unchecked and disabled."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckBox] is disabled."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckBox] is focused."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckBox] is hovered."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckBox] is hovered and "
-"pressed."
-msgstr ""
-
-#: doc/classes/CheckBox.xml doc/classes/CheckButton.xml
-msgid "The [StyleBox] to display as a background."
-msgstr ""
-
-#: doc/classes/CheckBox.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckBox] is pressed."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "Checkable button. See also [CheckBox]."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"CheckButton is a toggle button displayed as a check field. It's similar to "
-"[CheckBox] in functionality, but it has a different appearance. To follow "
-"established UX patterns, it's recommended to use CheckButton when toggling "
-"it has an [b]immediate[/b] effect on something. For instance, it should be "
-"used if toggling it enables/disables a setting without requiring the user to "
-"press a confirmation button.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The [CheckButton] text's font color."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The [CheckButton] text's font color when it's disabled."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"The [CheckButton] text's font color when it's focused. Only replaces the "
-"normal text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The [CheckButton] text's font color when it's hovered."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The [CheckButton] text's font color when it's hovered and pressed."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The [CheckButton] text's font color when it's pressed."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The vertical offset used when rendering the toggle icons (in pixels)."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The separation between the toggle icon and the text (in pixels)."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The [Font] to use for the [CheckButton] text."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The icon to display when the [CheckButton] is unchecked."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The icon to display when the [CheckButton] is unchecked and disabled."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The icon to display when the [CheckButton] is checked."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid "The icon to display when the [CheckButton] is checked and disabled."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckButton] is disabled."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckButton] is focused."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckButton] is hovered."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckButton] is hovered "
-"and pressed."
-msgstr ""
-
-#: doc/classes/CheckButton.xml
-msgid ""
-"The [StyleBox] to display as a background when the [CheckButton] is pressed."
-msgstr ""
-
-#: doc/classes/CircleShape2D.xml
-msgid "Circular shape for 2D collisions."
-msgstr ""
-
-#: doc/classes/CircleShape2D.xml
-msgid ""
-"Circular shape for 2D collisions. This shape is useful for modeling balls or "
-"small characters and its collision detection with everything else is very "
-"fast."
-msgstr ""
-
-#: doc/classes/CircleShape2D.xml
-msgid "The circle's radius."
-msgstr "Radius des Kreises."
-
-#: doc/classes/ClassDB.xml
-msgid "Class information repository."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid "Provides access to metadata stored for every available class."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns [code]true[/code] if you can instance objects from the specified "
-"[code]class[/code], [code]false[/code] in other case."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid "Returns whether the specified [code]class[/code] is available or not."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns a category associated with the class for use in documentation and "
-"the Asset Library. Debug mode required."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-#, fuzzy
-msgid ""
-"Returns an array with all the keys in [code]enum[/code] of [code]class[/"
-"code] or its ancestry."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/ClassDB.xml
-#, fuzzy
-msgid ""
-"Returns an array with all the enums of [code]class[/code] or its ancestry."
-msgstr ""
-"Gibt ein Array aller Zellen mit der angegebenen Kachel [code]index[/code] "
-"zurück."
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns the value of the integer constant [code]name[/code] of [code]class[/"
-"code] or its ancestry. Always returns 0 when the constant could not be found."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-#, fuzzy
-msgid ""
-"Returns which enum the integer constant [code]name[/code] of [code]class[/"
-"code] or its ancestry belongs to."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns an array with the names all the integer constants of [code]class[/"
-"code] or its ancestry."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns an array with all the methods of [code]class[/code] or its ancestry "
-"if [code]no_inheritance[/code] is [code]false[/code]. Every element of the "
-"array is a [Dictionary] with the following keys: [code]args[/code], "
-"[code]default_args[/code], [code]flags[/code], [code]id[/code], [code]name[/"
-"code], [code]return: (class_name, hint, hint_string, name, type, usage)[/"
-"code].\n"
-"[b]Note:[/b] In exported release builds the debug info is not available, so "
-"the returned dictionaries will contain only method names."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns the value of [code]property[/code] of [code]class[/code] or its "
-"ancestry."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns an array with all the properties of [code]class[/code] or its "
-"ancestry if [code]no_inheritance[/code] is [code]false[/code]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns the [code]signal[/code] data of [code]class[/code] or its ancestry. "
-"The returned value is a [Dictionary] with the following keys: [code]args[/"
-"code], [code]default_args[/code], [code]flags[/code], [code]id[/code], "
-"[code]name[/code], [code]return: (class_name, hint, hint_string, name, type, "
-"usage)[/code]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns an array with all the signals of [code]class[/code] or its ancestry "
-"if [code]no_inheritance[/code] is [code]false[/code]. Every element of the "
-"array is a [Dictionary] as described in [method class_get_signal]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-#, fuzzy
-msgid ""
-"Returns whether [code]class[/code] or its ancestry has an enum called "
-"[code]name[/code] or not."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Unternode mit dem angegebenen "
-"[code]name[/code] existiert."
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns whether [code]class[/code] or its ancestry has an integer constant "
-"called [code]name[/code] or not."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns whether [code]class[/code] (or its ancestry if [code]no_inheritance[/"
-"code] is [code]false[/code]) has a method called [code]method[/code] or not."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns whether [code]class[/code] or its ancestry has a signal called "
-"[code]signal[/code] or not."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Sets [code]property[/code] value of [code]class[/code] to [code]value[/code]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid "Returns the names of all the classes available."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns the names of all the classes that directly or indirectly inherit "
-"from [code]class[/code]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid "Returns the parent class of [code]class[/code]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid "Creates an instance of [code]class[/code]."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid "Returns whether this [code]class[/code] is enabled or not."
-msgstr ""
-
-#: doc/classes/ClassDB.xml
-msgid ""
-"Returns whether [code]inherits[/code] is an ancestor of [code]class[/code] "
-"or not."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid "A [Camera] that includes collision."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid ""
-"This node extends [Camera] to add collisions with [Area] and/or "
-"[PhysicsBody] nodes. The camera cannot move through colliding objects."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid ""
-"Adds a collision exception so the camera does not collide with the specified "
-"node."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid ""
-"Adds a collision exception so the camera does not collide with the specified "
-"[RID]."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid "Removes all collision exceptions."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid "Returns the distance the camera has been offset due to a collision."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid ""
-"Returns [code]true[/code] if the specified bit index is on.\n"
-"[b]Note:[/b] Bit indices range from 0-19."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid "Removes a collision exception with the specified node."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid "Removes a collision exception with the specified [RID]."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid ""
-"Sets the specified bit index to the [code]value[/code].\n"
-"[b]Note:[/b] Bit indices range from 0-19."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-#, fuzzy
-msgid "If [code]true[/code], the camera stops on contact with [Area]s."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/ClippedCamera.xml
-#, fuzzy
-msgid "If [code]true[/code], the camera stops on contact with [PhysicsBody]s."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/ClippedCamera.xml
-#, fuzzy
-msgid ""
-"The camera's collision mask. Only objects in at least one collision layer "
-"matching the mask will be detected. See [url=$DOCS_URL/tutorials/physics/"
-"physics_introduction.html#collision-layers-and-masks]Collision layers and "
-"masks[/url] in the documentation for more information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/ClippedCamera.xml
-msgid ""
-"The camera's collision margin. The camera can't get closer than this "
-"distance to a colliding object."
-msgstr ""
-
-#: doc/classes/ClippedCamera.xml
-msgid "The camera's process callback. See [enum ProcessMode]."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid "Base node for collision objects."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid ""
-"CollisionObject is the base class for physics objects. It can hold any "
-"number of collision [Shape]s. Each shape must be assigned to a [i]shape "
-"owner[/i]. The CollisionObject can have any number of shape owners. Shape "
-"owners are not nodes and do not appear in the editor, but are accessible "
-"through code using the [code]shape_owner_*[/code] methods."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid ""
-"Receives unhandled [InputEvent]s. [code]position[/code] is the location in "
-"world space of the mouse pointer on the surface of the shape with index "
-"[code]shape_idx[/code] and [code]normal[/code] is the normal vector of the "
-"surface at that point. Connect to the [signal input_event] signal to easily "
-"pick up these events."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"Creates a new shape owner for the given object. Returns [code]owner_id[/"
-"code] of the new owner for future reference."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"Returns whether or not the specified [code]bit[/code] of the [member "
-"collision_layer] is set."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"Returns whether or not the specified [code]bit[/code] of the [member "
-"collision_mask] is set."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-#: doc/classes/Navigation2D.xml
-msgid "Returns the object's [RID]."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"Returns an [Array] of [code]owner_id[/code] identifiers. You can use these "
-"ids in other methods that take [code]owner_id[/code] as an argument."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "If [code]true[/code], the shape owner and its shapes are disabled."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "Removes the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"If [code]value[/code] is [code]true[/code], sets the specified [code]bit[/"
-"code] in the [member collision_layer].\n"
-"If [code]value[/code] is [code]false[/code], clears the specified [code]bit[/"
-"code] in the [member collision_layer]."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"If [code]value[/code] is [code]true[/code], sets the specified [code]bit[/"
-"code] in the [member collision_mask].\n"
-"If [code]value[/code] is [code]false[/code], clears the specified [code]bit[/"
-"code] in the [member collision_mask]."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "Returns the [code]owner_id[/code] of the given shape."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-#, fuzzy
-msgid "Adds a [Shape] to the shape owner."
-msgstr "Fügt der Animation eine Spur hinzu."
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "Removes all shapes from the shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "Returns the parent object of the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-#, fuzzy
-msgid "Returns the [Shape] with the given id from the given shape owner."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "Returns the number of shapes the given shape owner contains."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid ""
-"Returns the child index of the [Shape] with the given id from the given "
-"shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid "Returns the shape owner's [Transform]."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "Removes a shape from the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid "If [code]true[/code], disables the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid "Sets the [Transform] of the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-#, fuzzy
-msgid ""
-"The physics layers this CollisionObject3D is in. Collision objects can exist "
-"in one or more of 32 different layers. See also [member collision_mask].\n"
-"[b]Note:[/b] A contact is detected if object A is in any of the layers that "
-"object B scans, or object B is in any layers that object A scans. See "
-"[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-"
-"and-masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/CollisionObject.xml
-#, fuzzy
-msgid ""
-"The physics layers this CollisionObject3D scans. Collision objects can scan "
-"one or more of 32 different layers. See also [member collision_layer].\n"
-"[b]Note:[/b] A contact is detected if object A is in any of the layers that "
-"object B scans, or object B is in any layers that object A scans. See "
-"[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-"
-"and-masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/CollisionObject.xml
-msgid ""
-"If [code]true[/code], the [CollisionObject] will continue to receive input "
-"events as the mouse is dragged across its shapes."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml doc/classes/CollisionObject2D.xml
-msgid ""
-"If [code]true[/code], this object is pickable. A pickable object can detect "
-"the mouse pointer entering/leaving, and if the mouse is inside it, report "
-"input events. Requires at least one [member collision_layer] bit to be set."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid ""
-"Emitted when the object receives an unhandled [InputEvent]. [code]position[/"
-"code] is the location in world space of the mouse pointer on the surface of "
-"the shape with index [code]shape_idx[/code] and [code]normal[/code] is the "
-"normal vector of the surface at that point."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid "Emitted when the mouse pointer enters any of this object's shapes."
-msgstr ""
-
-#: doc/classes/CollisionObject.xml
-msgid "Emitted when the mouse pointer exits all this object's shapes."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid "Base node for 2D collision objects."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"CollisionObject2D is the base class for 2D physics objects. It can hold any "
-"number of 2D collision [Shape2D]s. Each shape must be assigned to a [i]shape "
-"owner[/i]. The CollisionObject2D can have any number of shape owners. Shape "
-"owners are not nodes and do not appear in the editor, but are accessible "
-"through code using the [code]shape_owner_*[/code] methods.\n"
-"[b]Note:[/b] Only collisions between objects within the same canvas "
-"([Viewport] canvas or [CanvasLayer]) are supported. The behavior of "
-"collisions between objects in different canvases is undefined."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Accepts unhandled [InputEvent]s. Requires [member input_pickable] to be "
-"[code]true[/code]. [code]shape_idx[/code] is the child index of the clicked "
-"[Shape2D]. Connect to the [code]input_event[/code] signal to easily pick up "
-"these events."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Returns the [code]one_way_collision_margin[/code] of the shape owner "
-"identified by given [code]owner_id[/code]."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Returns [code]true[/code] if collisions for the shape owner originating from "
-"this [CollisionObject2D] will not be reported to collided with "
-"[CollisionObject2D]s."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid "Adds a [Shape2D] to the shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid "Returns the [Shape2D] with the given id from the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Returns the child index of the [Shape2D] with the given id from the given "
-"shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid "Returns the shape owner's [Transform2D]."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"If [code]enable[/code] is [code]true[/code], collisions for the shape owner "
-"originating from this [CollisionObject2D] will not be reported to collided "
-"with [CollisionObject2D]s."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Sets the [code]one_way_collision_margin[/code] of the shape owner identified "
-"by given [code]owner_id[/code] to [code]margin[/code] pixels."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid "Sets the [Transform2D] of the given shape owner."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-#, fuzzy
-msgid ""
-"The physics layers this CollisionObject2D is in. Collision objects can exist "
-"in one or more of 32 different layers. See also [member collision_mask].\n"
-"[b]Note:[/b] A contact is detected if object A is in any of the layers that "
-"object B scans, or object B is in any layers that object A scans. See "
-"[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-"
-"and-masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/CollisionObject2D.xml
-#, fuzzy
-msgid ""
-"The physics layers this CollisionObject2D scans. Collision objects can scan "
-"one or more of 32 different layers. See also [member collision_layer].\n"
-"[b]Note:[/b] A contact is detected if object A is in any of the layers that "
-"object B scans, or object B is in any layers that object A scans. See "
-"[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-"
-"and-masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Emitted when an input event occurs. Requires [member input_pickable] to be "
-"[code]true[/code] and at least one [code]collision_layer[/code] bit to be "
-"set. See [method _input_event] for details."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Emitted when the mouse pointer enters any of this object's shapes. Requires "
-"[member input_pickable] to be [code]true[/code] and at least one "
-"[code]collision_layer[/code] bit to be set."
-msgstr ""
-
-#: doc/classes/CollisionObject2D.xml
-msgid ""
-"Emitted when the mouse pointer exits all this object's shapes. Requires "
-"[member input_pickable] to be [code]true[/code] and at least one "
-"[code]collision_layer[/code] bit to be set."
-msgstr ""
-
-#: doc/classes/CollisionPolygon.xml
-msgid "Editor-only class for defining a collision polygon in 3D space."
-msgstr ""
-
-#: doc/classes/CollisionPolygon.xml
-msgid ""
-"Allows editing a collision polygon's vertices on a selected plane. Can also "
-"set a depth perpendicular to that plane. This class is only available in the "
-"editor. It will not appear in the scene tree at run-time. Creates a [Shape] "
-"for gameplay. Properties modified during gameplay will have no effect."
-msgstr ""
-
-#: doc/classes/CollisionPolygon.xml
-msgid ""
-"Length that the resulting collision extends in either direction "
-"perpendicular to its polygon."
-msgstr ""
-
-#: doc/classes/CollisionPolygon.xml
-msgid "If [code]true[/code], no collision will be produced."
-msgstr ""
-
-#: doc/classes/CollisionPolygon.xml
-msgid ""
-"The collision margin for the generated [Shape]. See [member Shape.margin] "
-"for more details."
-msgstr ""
-
-#: doc/classes/CollisionPolygon.xml
-msgid ""
-"Array of vertices which define the polygon.\n"
-"[b]Note:[/b] The returned value is a copy of the original. Methods which "
-"mutate the size or properties of the return value will not impact the "
-"original polygon. To change properties of the polygon, assign it to a "
-"temporary variable and make changes before reassigning the [code]polygon[/"
-"code] member."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid "Defines a 2D collision polygon."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid ""
-"Provides a 2D collision polygon to a [CollisionObject2D] parent. Polygons "
-"can be drawn in the editor or specified by a list of vertices."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid "Collision build mode. Use one of the [enum BuildMode] constants."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid "If [code]true[/code], no collisions will be detected."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid ""
-"If [code]true[/code], only edges that face up, relative to "
-"[CollisionPolygon2D]'s rotation, will collide with other objects.\n"
-"[b]Note:[/b] This property has no effect if this [CollisionPolygon2D] is a "
-"child of an [Area2D] node."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid ""
-"The margin used for one-way collision (in pixels). Higher values will make "
-"the shape thicker, and work better for colliders that enter the polygon at a "
-"high velocity."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid ""
-"The polygon's list of vertices. The final point will be connected to the "
-"first. The returned value is a clone of the [PoolVector2Array], not a "
-"reference."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid "Collisions will include the polygon and its contained area."
-msgstr ""
-
-#: doc/classes/CollisionPolygon2D.xml
-msgid "Collisions will only include the polygon edges."
-msgstr ""
-
-#: doc/classes/CollisionShape.xml
-msgid "Node that represents collision shape data in 3D space."
-msgstr ""
-
-#: doc/classes/CollisionShape.xml
-msgid ""
-"Editor facility for creating and editing collision shapes in 3D space. Set "
-"the [member shape] property to configure the shape. [b]IMPORTANT[/b]: this "
-"is an Editor-only helper to create shapes, use [method CollisionObject."
-"shape_owner_get_shape] to get the actual shape.\n"
-"You can use this node to represent all sorts of collision shapes, for "
-"example, add this to an [Area] to give it a detection shape, or add it to a "
-"[PhysicsBody] to create a solid object."
-msgstr ""
-
-#: doc/classes/CollisionShape.xml doc/classes/CollisionShape2D.xml
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/Physics2DDirectSpaceState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-#: doc/classes/PhysicsDirectSpaceState.xml doc/classes/RigidBody.xml
-#, fuzzy
-msgid "Physics introduction"
-msgstr "Kubische Interpolation."
-
-#: doc/classes/CollisionShape.xml
-msgid ""
-"Sets the collision shape's shape to the addition of all its convexed "
-"[MeshInstance] siblings geometry."
-msgstr ""
-
-#: doc/classes/CollisionShape.xml
-msgid ""
-"If this method exists within a script it will be called whenever the shape "
-"resource has been modified."
-msgstr ""
-
-#: doc/classes/CollisionShape.xml
-msgid "A disabled collision shape has no effect in the world."
-msgstr ""
-
-#: doc/classes/CollisionShape.xml doc/classes/CollisionShape2D.xml
-msgid "The actual shape owned by this collision shape."
-msgstr ""
-
-#: doc/classes/CollisionShape2D.xml
-msgid "Node that represents collision shape data in 2D space."
-msgstr ""
-
-#: doc/classes/CollisionShape2D.xml
-msgid ""
-"Editor facility for creating and editing collision shapes in 2D space. Set "
-"the [member shape] property to configure the shape. [b]IMPORTANT[/b]: this "
-"is an Editor-only helper to create shapes, use [method CollisionObject2D."
-"shape_owner_get_shape] to get the actual shape.\n"
-"You can use this node to represent all sorts of collision shapes, for "
-"example, add this to an [Area2D] to give it a detection shape, or add it to "
-"a [PhysicsBody2D] to create a solid object."
-msgstr ""
-
-#: doc/classes/CollisionShape2D.xml doc/classes/KinematicBody2D.xml
-#: doc/classes/RectangleShape2D.xml doc/classes/TileMap.xml
-#: doc/classes/TileSet.xml
-msgid "2D Kinematic Character Demo"
-msgstr ""
-
-#: doc/classes/CollisionShape2D.xml
-msgid ""
-"A disabled collision shape has no effect in the world. This property should "
-"be changed with [method Object.set_deferred]."
-msgstr ""
-
-#: doc/classes/CollisionShape2D.xml
-msgid ""
-"Sets whether this collision shape should only detect collision on one side "
-"(top or bottom).\n"
-"[b]Note:[/b] This property has no effect if this [CollisionShape2D] is a "
-"child of an [Area2D] node."
-msgstr ""
-
-#: doc/classes/CollisionShape2D.xml
-msgid ""
-"The margin used for one-way collision (in pixels). Higher values will make "
-"the shape thicker, and work better for colliders that enter the shape at a "
-"high velocity."
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid "Color in RGBA format using floats on the range of 0 to 1."
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"A color represented by red, green, blue, and alpha (RGBA) components. The "
-"alpha component is often used for opacity. Values are in floating-point and "
-"usually range from 0 to 1. Some properties (such as CanvasItem.modulate) may "
-"accept values greater than 1 (overbright or HDR colors).\n"
-"You can also create a color from standardized color names by using [method "
-"@GDScript.ColorN] or directly using the color constants defined here. The "
-"standardized color set is based on the [url=https://en.wikipedia.org/wiki/"
-"X11_color_names]X11 color names[/url].\n"
-"If you want to supply values in a range of 0 to 255, you should use [method "
-"@GDScript.Color8].\n"
-"[b]Note:[/b] In a boolean context, a Color will evaluate to [code]false[/"
-"code] if it's equal to [code]Color(0, 0, 0, 1)[/code] (opaque black). "
-"Otherwise, a Color will always evaluate to [code]true[/code].\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"color_constants.png]Color constants cheatsheet[/url]"
-msgstr ""
-
-#: doc/classes/Color.xml doc/classes/ColorPickerButton.xml
-msgid "2D GD Paint Demo"
-msgstr ""
-
-#: doc/classes/Color.xml doc/classes/ColorPicker.xml
-msgid "Tween Demo"
-msgstr ""
-
-#: doc/classes/Color.xml doc/classes/ColorPickerButton.xml
-msgid "GUI Drag And Drop Demo"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Constructs a color from an HTML hexadecimal color string in ARGB or RGB "
-"format. See also [method @GDScript.ColorN].\n"
-"[codeblock]\n"
-"# Each of the following creates the same color RGBA(178, 217, 10, 255).\n"
-"var c1 = Color(\"#ffb2d90a\") # ARGB format with \"#\".\n"
-"var c2 = Color(\"ffb2d90a\") # ARGB format.\n"
-"var c3 = Color(\"#b2d90a\") # RGB format with \"#\".\n"
-"var c4 = Color(\"b2d90a\") # RGB format.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Constructs a color from a 32-bit integer in RGBA format (each byte "
-"represents a color channel).\n"
-"[codeblock]\n"
-"var color = Color(274) # Similar to Color(0.0, 0.0, 0.004, 0.07)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Constructs a color from RGB values, typically between 0 and 1. Alpha will be "
-"1.\n"
-"[codeblock]\n"
-"var color = Color(0.2, 1.0, 0.7) # Similar to Color8(51, 255, 178, 255)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Constructs a color from RGBA values, typically between 0 and 1.\n"
-"[codeblock]\n"
-"var color = Color(0.2, 1.0, 0.7, 0.8) # Similar to Color8(51, 255, 178, "
-"204)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns a new color resulting from blending this color over another. If the "
-"color is opaque, the result is also opaque. The second color may have a "
-"range of alpha values.\n"
-"[codeblock]\n"
-"var bg = Color(0.0, 1.0, 0.0, 0.5) # Green with alpha of 50%\n"
-"var fg = Color(1.0, 0.0, 0.0, 0.5) # Red with alpha of 50%\n"
-"var blended_color = bg.blend(fg) # Brown with alpha of 75%\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the most contrasting color.\n"
-"[codeblock]\n"
-"var color = Color(0.3, 0.4, 0.9)\n"
-"var contrasted_color = color.contrasted() # Equivalent to RGBA(204, 229, "
-"102, 255)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns a new color resulting from making this color darker by the specified "
-"percentage (ratio from 0 to 1).\n"
-"[codeblock]\n"
-"var green = Color(0.0, 1.0, 0.0)\n"
-"var darkgreen = green.darkened(0.2) # 20% darker than regular green\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Constructs a color from an HSV profile. [code]h[/code], [code]s[/code], and "
-"[code]v[/code] are values between 0 and 1.\n"
-"[codeblock]\n"
-"var color = Color.from_hsv(0.58, 0.5, 0.79, 0.8) # Equivalent to HSV(210, "
-"50, 79, 0.8) or Color8(100, 151, 201, 0.8)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the luminance of the color in the [code][0.0, 1.0][/code] range.\n"
-"This is useful when determining light or dark color. Colors with a luminance "
-"smaller than 0.5 can be generally considered dark."
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color's grayscale representation.\n"
-"The gray value is calculated as [code](r + g + b) / 3[/code].\n"
-"[codeblock]\n"
-"var color = Color(0.2, 0.45, 0.82)\n"
-"var gray = color.gray() # A value of 0.466667\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the inverted color [code](1 - r, 1 - g, 1 - b, a)[/code].\n"
-"[codeblock]\n"
-"var color = Color(0.3, 0.4, 0.9)\n"
-"var inverted_color = color.inverted() # Equivalent to Color(0.7, 0.6, 0.1)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns [code]true[/code] if this color and [code]color[/code] are "
-"approximately equal, by running [method @GDScript.is_equal_approx] on each "
-"component."
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns a new color resulting from making this color lighter by the "
-"specified percentage (ratio from 0 to 1).\n"
-"[codeblock]\n"
-"var green = Color(0.0, 1.0, 0.0)\n"
-"var lightgreen = green.lightened(0.2) # 20% lighter than regular green\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the linear interpolation with another color. The interpolation "
-"factor [code]weight[/code] is between 0 and 1.\n"
-"[codeblock]\n"
-"var c1 = Color(1.0, 0.0, 0.0)\n"
-"var c2 = Color(0.0, 1.0, 0.0)\n"
-"var li_c = c1.linear_interpolate(c2, 0.5) # Equivalent to Color(0.5, 0.5, "
-"0.0)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color converted to a 32-bit integer in ABGR format (each byte "
-"represents a color channel). ABGR is the reversed version of the default "
-"format.\n"
-"[codeblock]\n"
-"var color = Color(1, 0.5, 0.2)\n"
-"print(color.to_abgr32()) # Prints 4281565439\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color converted to a 64-bit integer in ABGR format (each word "
-"represents a color channel). ABGR is the reversed version of the default "
-"format.\n"
-"[codeblock]\n"
-"var color = Color(1, 0.5, 0.2)\n"
-"print(color.to_abgr64()) # Prints -225178692812801\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color converted to a 32-bit integer in ARGB format (each byte "
-"represents a color channel). ARGB is more compatible with DirectX.\n"
-"[codeblock]\n"
-"var color = Color(1, 0.5, 0.2)\n"
-"print(color.to_argb32()) # Prints 4294934323\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color converted to a 64-bit integer in ARGB format (each word "
-"represents a color channel). ARGB is more compatible with DirectX.\n"
-"[codeblock]\n"
-"var color = Color(1, 0.5, 0.2)\n"
-"print(color.to_argb64()) # Prints -2147470541\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color's HTML hexadecimal color string in ARGB format (ex: "
-"[code]ff34f822[/code]).\n"
-"Setting [code]with_alpha[/code] to [code]false[/code] excludes alpha from "
-"the hexadecimal string.\n"
-"[codeblock]\n"
-"var color = Color(1, 1, 1, 0.5)\n"
-"var s1 = color.to_html() # Returns \"7fffffff\"\n"
-"var s2 = color.to_html(false) # Returns \"ffffff\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color converted to a 32-bit integer in RGBA format (each byte "
-"represents a color channel). RGBA is Godot's default format.\n"
-"[codeblock]\n"
-"var color = Color(1, 0.5, 0.2)\n"
-"print(color.to_rgba32()) # Prints 4286526463\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"Returns the color converted to a 64-bit integer in RGBA format (each word "
-"represents a color channel). RGBA is Godot's default format.\n"
-"[codeblock]\n"
-"var color = Color(1, 0.5, 0.2)\n"
-"print(color.to_rgba64()) # Prints -140736629309441\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid ""
-"The color's alpha component, typically on the range of 0 to 1. A value of 0 "
-"means that the color is fully transparent. A value of 1 means that the color "
-"is fully opaque."
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid "Wrapper for [member a] that uses the range 0 to 255 instead of 0 to 1."
-msgstr ""
-"Wrapper für [member a], der den Bereich 0 bis 255 anstelle von 0 bis 1 "
-"verwendet."
-
-#: doc/classes/Color.xml
-msgid "The color's blue component, typically on the range of 0 to 1."
-msgstr "Der Blauanteil der Farbe, normalerweise im Bereich von 0 bis 1."
-
-#: doc/classes/Color.xml
-msgid "Wrapper for [member b] that uses the range 0 to 255 instead of 0 to 1."
-msgstr ""
-"Wrapper für [member b], der den Bereich 0 bis 255 anstelle von 0 bis 1 "
-"verwendet."
-
-#: doc/classes/Color.xml
-msgid "The color's green component, typically on the range of 0 to 1."
-msgstr "Der Grünanteil der Farbe, normalerweise im Bereich von 0 bis 1."
-
-#: doc/classes/Color.xml
-msgid "Wrapper for [member g] that uses the range 0 to 255 instead of 0 to 1."
-msgstr ""
-"Wrapper für [member g], der den Bereich 0 bis 255 anstelle von 0 bis 1 "
-"verwendet."
-
-#: doc/classes/Color.xml
-msgid "The HSV hue of this color, on the range 0 to 1."
-msgstr "Der HSV-Farbton dieser Farbe, im Bereich von 0 bis 1."
-
-#: doc/classes/Color.xml
-msgid "The color's red component, typically on the range of 0 to 1."
-msgstr "Der Rotanteil der Farbe, normalerweise im Bereich von 0 bis 1."
-
-#: doc/classes/Color.xml
-msgid "Wrapper for [member r] that uses the range 0 to 255 instead of 0 to 1."
-msgstr ""
-"Wrapper für [member r], der den Bereich 0 bis 255 anstelle von 0 bis 1 "
-"verwendet."
-
-#: doc/classes/Color.xml
-msgid "The HSV saturation of this color, on the range 0 to 1."
-msgstr "Die HSV-Sättigung dieser Farbe, im Bereich von 0 bis 1."
-
-#: doc/classes/Color.xml
-msgid "The HSV value (brightness) of this color, on the range 0 to 1."
-msgstr "Der HSV-Wert (Helligkeit) dieser Farbe, im Bereich von 0 bis 1."
-
-#: doc/classes/Color.xml
-msgid "Alice blue color."
-msgstr "Aliceblau Farbe."
-
-#: doc/classes/Color.xml
-msgid "Antique white color."
-msgstr ""
-
-#: doc/classes/Color.xml
-msgid "Aqua color."
-msgstr "Aqua Farbe."
-
-#: doc/classes/Color.xml
-msgid "Aquamarine color."
-msgstr "Aquamarin Farbe."
-
-#: doc/classes/Color.xml
-msgid "Azure color."
-msgstr "Azurblau Farbe."
-
-#: doc/classes/Color.xml
-msgid "Beige color."
-msgstr "Beige Farbe."
-
-#: doc/classes/Color.xml
-msgid "Bisque color."
-msgstr "Biskuit Farbe."
-
-#: doc/classes/Color.xml
-msgid "Black color."
-msgstr "Schwarze Farbe."
-
-#: doc/classes/Color.xml
-msgid "Blanche almond color."
-msgstr "Blanche Mandel Farbe."
-
-#: doc/classes/Color.xml
-msgid "Blue color."
-msgstr "Blaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Blue violet color."
-msgstr "Blauviolette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Brown color."
-msgstr "Braune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Burly wood color."
-msgstr "Kräftige Holzfarbe."
-
-#: doc/classes/Color.xml
-msgid "Cadet blue color."
-msgstr "Kadettblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Chartreuse color."
-msgstr "Chartreuse Farbe."
-
-#: doc/classes/Color.xml
-msgid "Chocolate color."
-msgstr "Schokolade Farbe."
-
-#: doc/classes/Color.xml
-msgid "Coral color."
-msgstr "Korallenrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Cornflower color."
-msgstr "Kornblumenblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Corn silk color."
-msgstr "Maisseide Farbe."
-
-#: doc/classes/Color.xml
-msgid "Crimson color."
-msgstr "Karminrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Cyan color."
-msgstr "Cyan Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark blue color."
-msgstr "Dunkelblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark cyan color."
-msgstr "Dunkelcyan Farben."
-
-#: doc/classes/Color.xml
-msgid "Dark goldenrod color."
-msgstr "Dunkle goldgelbe Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark gray color."
-msgstr "Dunkelgraue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark green color."
-msgstr "Dunkelgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark khaki color."
-msgstr "Dunkel Khaki Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark magenta color."
-msgstr "Dunkle Magenta Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark olive green color."
-msgstr "Dunkle olivgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark orange color."
-msgstr "Dunkelorange Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark orchid color."
-msgstr "Dunkle Orchidee Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark red color."
-msgstr "Dunkelrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark salmon color."
-msgstr "Dunkle lachsfarbene Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark sea green color."
-msgstr "Dunkle meergrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark slate blue color."
-msgstr "Dunkle schieferblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark slate gray color."
-msgstr "Dunkle schiefergraue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark turquoise color."
-msgstr "Dunkeltürkise Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dark violet color."
-msgstr "Dunkelviolette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Deep pink color."
-msgstr "Tiefrosa Farbe."
-
-#: doc/classes/Color.xml
-msgid "Deep sky blue color."
-msgstr "Tiefe himmelblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dim gray color."
-msgstr "Gedämpfte graue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Dodger blue color."
-msgstr "Dodgerblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Firebrick color."
-msgstr "Feuerstein Farbe."
-
-#: doc/classes/Color.xml
-msgid "Floral white color."
-msgstr "Florale weiße Farbe."
-
-#: doc/classes/Color.xml
-msgid "Forest green color."
-msgstr "Waldgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Fuchsia color."
-msgstr "Fuchsia Farbe."
-
-#: doc/classes/Color.xml
-msgid "Gainsboro color."
-msgstr "Gainsboro Farbe."
-
-#: doc/classes/Color.xml
-msgid "Ghost white color."
-msgstr "Geisterweiße Farbe."
-
-#: doc/classes/Color.xml
-msgid "Gold color."
-msgstr "Goldene Farbe."
-
-#: doc/classes/Color.xml
-msgid "Goldenrod color."
-msgstr "Goldrute Farbe."
-
-#: doc/classes/Color.xml
-msgid "Gray color."
-msgstr "Graue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Green color."
-msgstr "Grüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Green yellow color."
-msgstr "Grün-gelbe Farbe."
-
-#: doc/classes/Color.xml
-msgid "Honeydew color."
-msgstr "Honigtau Farbe."
-
-#: doc/classes/Color.xml
-msgid "Hot pink color."
-msgstr "Heiße rosa Farbe."
-
-#: doc/classes/Color.xml
-msgid "Indian red color."
-msgstr "Indisch rote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Indigo color."
-msgstr "Indigo Farbe."
-
-#: doc/classes/Color.xml
-msgid "Ivory color."
-msgstr "Elfenbein Farbe."
-
-#: doc/classes/Color.xml
-msgid "Khaki color."
-msgstr "Khaki Farbe."
-
-#: doc/classes/Color.xml
-msgid "Lavender color."
-msgstr "Lavendel Farbe."
-
-#: doc/classes/Color.xml
-msgid "Lavender blush color."
-msgstr "Lavendelrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Lawn green color."
-msgstr "Rasengrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Lemon chiffon color."
-msgstr "Zitrone Chiffon Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light blue color."
-msgstr "Hellblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light coral color."
-msgstr "Helle korallenrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light cyan color."
-msgstr "Helle Cyan Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light goldenrod color."
-msgstr "Helle Goldrute Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light gray color."
-msgstr "Hellgraue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light green color."
-msgstr "Hellgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light pink color."
-msgstr "Hellrosa Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light salmon color."
-msgstr "Helle lachsfarbene Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light sea green color."
-msgstr "Helle meergrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light sky blue color."
-msgstr "Helle himmelblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light slate gray color."
-msgstr "Helle schiefergraue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light steel blue color."
-msgstr "Helle stahlblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Light yellow color."
-msgstr "Hellgelbe Farbe."
-
-#: doc/classes/Color.xml
-msgid "Lime color."
-msgstr "Limette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Lime green color."
-msgstr "Limonengrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Linen color."
-msgstr "Leinen Farbe."
-
-#: doc/classes/Color.xml
-msgid "Magenta color."
-msgstr "Magenta Farbe."
-
-#: doc/classes/Color.xml
-msgid "Maroon color."
-msgstr "Kastanienbraune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium aquamarine color."
-msgstr "Mittlere Aquamarin Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium blue color."
-msgstr "Mittelblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium orchid color."
-msgstr "Mittlere Orchideen Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium purple color."
-msgstr "Mittlere violette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium sea green color."
-msgstr "Mittlere meergrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium slate blue color."
-msgstr "Mittlere schieferblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium spring green color."
-msgstr "Mittlere frühlingsgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium turquoise color."
-msgstr "Mittlere türkise Farbe."
-
-#: doc/classes/Color.xml
-msgid "Medium violet red color."
-msgstr "Mittlere violettrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Midnight blue color."
-msgstr "Mitternachtsblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Mint cream color."
-msgstr "Mint-Creme Farbe."
-
-#: doc/classes/Color.xml
-msgid "Misty rose color."
-msgstr "Neblige rosa Farbe."
-
-#: doc/classes/Color.xml
-msgid "Moccasin color."
-msgstr "Mokassin Farbe."
-
-#: doc/classes/Color.xml
-msgid "Navajo white color."
-msgstr "Navajo weiße Farbe."
-
-#: doc/classes/Color.xml
-msgid "Navy blue color."
-msgstr "Marineblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Old lace color."
-msgstr "Alte Spitze Farbe."
-
-#: doc/classes/Color.xml
-msgid "Olive color."
-msgstr "Olive Farbe."
-
-#: doc/classes/Color.xml
-msgid "Olive drab color."
-msgstr "Olivgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Orange color."
-msgstr "Orange Farbe."
-
-#: doc/classes/Color.xml
-msgid "Orange red color."
-msgstr "Orangerote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Orchid color."
-msgstr "Orchidee Farbe."
-
-#: doc/classes/Color.xml
-msgid "Pale goldenrod color."
-msgstr "Blasse Goldrute Farbe."
-
-#: doc/classes/Color.xml
-msgid "Pale green color."
-msgstr "Blassgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Pale turquoise color."
-msgstr "Blasse türkise Farbe."
-
-#: doc/classes/Color.xml
-msgid "Pale violet red color."
-msgstr "Blass violettrote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Papaya whip color."
-msgstr "Papaya-Peitsche Farbe."
-
-#: doc/classes/Color.xml
-msgid "Peach puff color."
-msgstr "Pfirsich Puff Farbe."
-
-#: doc/classes/Color.xml
-msgid "Peru color."
-msgstr "Peru Farbe."
-
-#: doc/classes/Color.xml
-msgid "Pink color."
-msgstr "Rosa Farbe."
-
-#: doc/classes/Color.xml
-msgid "Plum color."
-msgstr "Pflaume Farbe."
-
-#: doc/classes/Color.xml
-msgid "Powder blue color."
-msgstr "Pulverblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Purple color."
-msgstr "Violette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Rebecca purple color."
-msgstr "Rebecca violette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Red color."
-msgstr "Rote Farbe."
-
-#: doc/classes/Color.xml
-msgid "Rosy brown color."
-msgstr "Rosigbraune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Royal blue color."
-msgstr "Königsblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Saddle brown color."
-msgstr "Sattelbraune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Salmon color."
-msgstr "Lachsfarbige Farbe."
-
-#: doc/classes/Color.xml
-msgid "Sandy brown color."
-msgstr "Sandige braune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Sea green color."
-msgstr "Meeresgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Seashell color."
-msgstr "Muschel Farbe."
-
-#: doc/classes/Color.xml
-msgid "Sienna color."
-msgstr "Siena Farbe."
-
-#: doc/classes/Color.xml
-msgid "Silver color."
-msgstr "Silberne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Sky blue color."
-msgstr "Himmelblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Slate blue color."
-msgstr "Schieferblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Slate gray color."
-msgstr "Schiefergraue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Snow color."
-msgstr "Schnee Farbe."
-
-#: doc/classes/Color.xml
-msgid "Spring green color."
-msgstr "Frühlingsgrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Steel blue color."
-msgstr "Stahlblaue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Tan color."
-msgstr "Hellbraune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Teal color."
-msgstr "Blaugrüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Thistle color."
-msgstr "Distel Farbe."
-
-#: doc/classes/Color.xml
-msgid "Tomato color."
-msgstr "Tomaten Farbe."
-
-#: doc/classes/Color.xml
-msgid "Transparent color (white with no alpha)."
-msgstr "Transparente Farbe (weiß ohne Alpha)."
-
-#: doc/classes/Color.xml
-msgid "Turquoise color."
-msgstr "Türkise Farbe."
-
-#: doc/classes/Color.xml
-msgid "Violet color."
-msgstr "Violette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Web gray color."
-msgstr "Web graue Farbe."
-
-#: doc/classes/Color.xml
-msgid "Web green color."
-msgstr "Web grüne Farbe."
-
-#: doc/classes/Color.xml
-msgid "Web maroon color."
-msgstr "Web kastanienbraune Farbe."
-
-#: doc/classes/Color.xml
-msgid "Web purple color."
-msgstr "Web violette Farbe."
-
-#: doc/classes/Color.xml
-msgid "Wheat color."
-msgstr "Weizen Farbe."
-
-#: doc/classes/Color.xml
-msgid "White color."
-msgstr "Weiße Farbe."
-
-#: doc/classes/Color.xml
-msgid "White smoke color."
-msgstr "Rauchweiße Farbe."
-
-#: doc/classes/Color.xml
-msgid "Yellow color."
-msgstr "Gelbe Farbe."
-
-#: doc/classes/Color.xml
-msgid "Yellow green color."
-msgstr "Gelbgrüne Farbe."
-
-#: doc/classes/ColorPicker.xml
-msgid "Color picker control."
-msgstr "Farbauswahl-Steuerung."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"Displays a color picker widget. Useful for selecting a color from an RGB/"
-"RGBA colorspace.\n"
-"[b]Note:[/b] This control is the color picker widget itself. You can use a "
-"[ColorPickerButton] instead if you need a button that brings up a "
-"[ColorPicker] in a pop-up."
-msgstr ""
-"Zeigt ein Element zur Farbauswahl an. Nützlich für die Auswahl einer Farbe "
-"aus einem RGB/RGBA-Farbraum.\n"
-"[b]Hinweis:[/b] Dieses Steuerelement ist das Farbwähler-Element selbst. Sie "
-"können stattdessen einen [ColorPickerButton] verwenden, wenn Sie eine "
-"Schaltfläche benötigen, die einen [ColorPicker] in einem Popup-Fenster "
-"aufruft."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"Adds the given color to a list of color presets. The presets are displayed "
-"in the color picker and the user will be able to select them.\n"
-"[b]Note:[/b] The presets list is only for [i]this[/i] color picker."
-msgstr ""
-"Fügt die angegebene Farbe zu einer Liste von Farbvorlagen hinzu. Die "
-"Vorlagen werden in der Farbauswahl angezeigt und der Benutzer kann sie "
-"auswählen.\n"
-"[b]Hinweis:[/b] Die Liste der Vorlagen gilt nur für [i]diesen[/i] Farbwähler."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"Removes the given color from the list of color presets of this color picker."
-msgstr ""
-"Entfernt die angegebene Farbe aus der Liste der Farbvorlagen für diesen "
-"Farbwähler."
-
-#: doc/classes/ColorPicker.xml
-msgid "Returns the list of colors in the presets of the color picker."
-msgstr "Gibt die Liste der Farben in den Vorlagen des Farbwählers zurück."
-
-#: doc/classes/ColorPicker.xml doc/classes/ColorPickerButton.xml
-msgid "The currently selected color."
-msgstr "Die aktuell ausgewählte Farbe."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"If [code]true[/code], the color will apply only after the user releases the "
-"mouse button, otherwise it will apply immediately even in mouse motion event "
-"(which can cause performance issues)."
-msgstr ""
-"Wenn [code]true[/code], wird die Farbe erst angewendet, wenn der Benutzer "
-"die Maustaste loslässt, andernfalls wird sie auch bei Mausbewegungen sofort "
-"angewendet (was zu Leistungsproblemen führen kann)."
-
-#: doc/classes/ColorPicker.xml
-#, fuzzy
-msgid "If [code]true[/code], shows an alpha channel slider (opacity)."
-msgstr ""
-"Wenn [code]true[/code], wird ein Alphakanal-Schieberegler (Transparenz) "
-"angezeigt."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"If [code]true[/code], allows editing the color with Hue/Saturation/Value "
-"sliders.\n"
-"[b]Note:[/b] Cannot be enabled if raw mode is on."
-msgstr ""
-"Wenn [code]true[/code], kann die Farbe mit den Schiebereglern Farbton/"
-"Sättigung/Wert bearbeitet werden.\n"
-"[b]Hinweis:[/b] Kann nicht aktiviert werden, wenn der Raw-Modus aktiviert "
-"ist."
-
-#: doc/classes/ColorPicker.xml
-msgid "If [code]true[/code], the \"add preset\" button is enabled."
-msgstr ""
-"Wenn [code]true[/code], ist die Schaltfläche \"Vorlage hinzufügen\" "
-"aktiviert."
-
-#: doc/classes/ColorPicker.xml
-msgid "If [code]true[/code], saved color presets are visible."
-msgstr "Wenn [code]true[/code], sind gespeicherte Farbvorlagen sichtbar."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"If [code]true[/code], allows the color R, G, B component values to go beyond "
-"1.0, which can be used for certain special operations that require it (like "
-"tinting without darkening or rendering sprites in HDR).\n"
-"[b]Note:[/b] Cannot be enabled if HSV mode is on."
-msgstr ""
-"Wenn [code]true[/code], können die Farbwerte der R, G, B Komponenten über "
-"1.0 hinausgehen, was für bestimmte spezielle Operationen, die dies "
-"erfordern, verwendet werden kann (z. B. Abtönen ohne Abdunkeln oder Rendern "
-"von Sprites in HDR).\n"
-"[b]Hinweis:[/b] Kann nicht aktiviert werden, wenn der HSV-Modus aktiviert "
-"ist."
-
-#: doc/classes/ColorPicker.xml
-msgid "Emitted when the color is changed."
-msgstr "Wird ausgegeben, wenn die Farbe geändert wird."
-
-#: doc/classes/ColorPicker.xml
-msgid "Emitted when a preset is added."
-msgstr "Wird ausgegeben, wenn eine Vorlage hinzugefügt wird."
-
-#: doc/classes/ColorPicker.xml
-msgid "Emitted when a preset is removed."
-msgstr "Wird ausgegeben, wenn eine Vorlage entfernt wird."
-
-#: doc/classes/ColorPicker.xml
-msgid "The width of the hue selection slider."
-msgstr "Die Breite des Schiebereglers für die Farbauswahl."
-
-#: doc/classes/ColorPicker.xml
-msgid "The margin around the [ColorPicker]."
-msgstr "Der Rand um den [ColorPicker]."
-
-#: doc/classes/ColorPicker.xml
-msgid "The height of the saturation-value selection box."
-msgstr "Die Höhe des Auswahlfeldes für den Sättigungswert."
-
-#: doc/classes/ColorPicker.xml
-msgid "The width of the saturation-value selection box."
-msgstr "Die Breite des Auswahlfeldes für den Sättigungswert."
-
-#: doc/classes/ColorPicker.xml
-msgid "The icon for the \"Add Preset\" button."
-msgstr "Das Symbol für die Schaltfläche \" Vorlage hinzufügen\"."
-
-#: doc/classes/ColorPicker.xml
-msgid "Custom texture for the hue selection slider on the right."
-msgstr ""
-"Benutzerdefinierte Textur für den Schieberegler zur Farbauswahl auf der "
-"rechten Seite."
-
-#: doc/classes/ColorPicker.xml
-msgid ""
-"The indicator used to signalize that the color value is outside the 0-1 "
-"range."
-msgstr ""
-"Der Indikator, der signalisiert, dass der Farbwert außerhalb des Bereichs "
-"0-1 liegt."
-
-#: doc/classes/ColorPicker.xml
-msgid "The icon for the screen color picker button."
-msgstr "Das Symbol für die Schaltfläche des Bildschirmfarbwählers."
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Button that pops out a [ColorPicker]."
-msgstr "Schaltfläche, die einen [ColorPicker] erscheinen lässt."
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"Encapsulates a [ColorPicker] making it accessible by pressing a button. "
-"Pressing the button will toggle the [ColorPicker] visibility.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node.\n"
-"[b]Note:[/b] By default, the button may not be wide enough for the color "
-"preview swatch to be visible. Make sure to set [member Control."
-"rect_min_size] to a big enough value to give the button enough space."
-msgstr ""
-"Verkapselt einen [ColorPicker] und macht ihn durch Drücken einer "
-"Schaltfläche zugänglich. Durch Drücken der Schaltfläche wird die "
-"Sichtbarkeit des [ColorPicker] umgeschaltet.\n"
-"Siehe auch [BaseButton], das allgemeine Eigenschaften und Methoden im "
-"Zusammenhang mit diesem Node enthält.\n"
-"[b]Hinweis:[/b] Standardmäßig ist die Schaltfläche möglicherweise nicht "
-"breit genug, damit das Farbvorschaumuster sichtbar ist. Achte darauf, "
-"[member Control.rect_min_size] auf einen ausreichend großen Wert zu setzen, "
-"damit die Schaltfläche genügend Platz hat."
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"Returns the [ColorPicker] that this node toggles.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-"Gibt den [ColorPicker] aus, den dieser Node umschaltet.\n"
-"[b]Warnung:[/b] Dies ist ein erforderlicher interner Node, sein Entfernen "
-"und Freigeben kann zu einem Absturz führen. Wenn Sie ihn oder eines seiner "
-"Kinder ausblenden möchten, verwenden Sie deren Eigenschaft [member "
-"CanvasItem.visible]."
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"Returns the control's [PopupPanel] which allows you to connect to popup "
-"signals. This allows you to handle events when the ColorPicker is shown or "
-"hidden.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-"Gibt das [PopupPanel] des Steuerelements aus, mit dem Sie eine Verbindung zu "
-"Popup-Signalen herstellen können. So können Sie Ereignisse handhaben, wenn "
-"der Farbwähler angezeigt oder ausgeblendet wird.\n"
-"[b]Warnung:[/b] Dies ist ein erforderlicher interner Node, sein Entfernen "
-"und Freigeben kann zu einem Absturz führen. Wenn Sie ihn oder eines seiner "
-"Kinder ausblenden möchten, verwenden Sie deren Eigenschaft [member "
-"CanvasItem.visible]."
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"If [code]true[/code], the alpha channel in the displayed [ColorPicker] will "
-"be visible."
-msgstr ""
-"Wenn [code]true[/code], wird der Alphakanal im angezeigten [ColorPicker] "
-"sichtbar sein."
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Emitted when the color changes."
-msgstr "Wird ausgegeben, wenn sich die Farbe ändert."
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"Emitted when the [ColorPicker] is created (the button is pressed for the "
-"first time)."
-msgstr ""
-"Wird ausgegeben, wenn der [ColorPicker] erstellt wird (wenn die Schaltfläche "
-"zum ersten Mal gedrückt wird)."
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Emitted when the [ColorPicker] is closed."
-msgstr "Wird ausgegeben, wenn der [ColorPicker] geschlossen wird."
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Default text [Color] of the [ColorPickerButton]."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Text [Color] used when the [ColorPickerButton] is disabled."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"Text [Color] used when the [ColorPickerButton] is focused. Only replaces the "
-"normal text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Text [Color] used when the [ColorPickerButton] is being hovered."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Text [Color] used when the [ColorPickerButton] is being pressed."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "The horizontal space between [ColorPickerButton]'s icon and text."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "[Font] of the [ColorPickerButton]'s text."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "The background of the color preview rect on the button."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "[StyleBox] used when the [ColorPickerButton] is disabled."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid ""
-"[StyleBox] used when the [ColorPickerButton] is focused. It is displayed "
-"over the current [StyleBox], so using [StyleBoxEmpty] will just disable the "
-"focus visual effect."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "[StyleBox] used when the [ColorPickerButton] is being hovered."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "Default [StyleBox] for the [ColorPickerButton]."
-msgstr ""
-
-#: doc/classes/ColorPickerButton.xml
-msgid "[StyleBox] used when the [ColorPickerButton] is being pressed."
-msgstr ""
-
-#: doc/classes/ColorRect.xml
-msgid "Colored rectangle."
-msgstr ""
-
-#: doc/classes/ColorRect.xml
-msgid ""
-"Displays a rectangle filled with a solid [member color]. If you need to "
-"display the border alone, consider using [ReferenceRect] instead."
-msgstr ""
-
-#: doc/classes/ColorRect.xml
-msgid ""
-"The fill color.\n"
-"[codeblock]\n"
-"$ColorRect.color = Color(1, 0, 0, 1) # Set ColorRect's color to red.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape.xml
-msgid "Concave polygon shape."
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape.xml
-msgid ""
-"Concave polygon shape resource, which can be set into a [PhysicsBody] or "
-"area. This shape is created by feeding a list of triangles.\n"
-"[b]Note:[/b] When used for collision, [ConcavePolygonShape] is intended to "
-"work with static [PhysicsBody] nodes like [StaticBody] and will not work "
-"with [KinematicBody] or [RigidBody] with a mode other than Static.\n"
-"[b]Warning:[/b] Using this shape for an [Area] (via a [CollisionShape] node, "
-"created e.g. by using the [i]Create Trimesh Collision Sibling[/i] option in "
-"the [i]Mesh[/i] menu that appears when selecting a [MeshInstance] node) may "
-"give unexpected results: when using Godot Physics, the area will only detect "
-"collisions with the triangle faces in the [ConcavePolygonShape] (and not "
-"with any \"inside\" of the shape, for example), and when using Bullet "
-"Physics the area will not detect any collisions with the concave shape at "
-"all (this is a known bug)."
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape.xml
-msgid "Returns the faces (an array of triangles)."
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape.xml
-msgid "Sets the faces (an array of triangles)."
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape2D.xml
-msgid "Concave polygon 2D shape resource for physics."
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape2D.xml
-msgid ""
-"Concave polygon 2D shape resource for physics. It is made out of segments "
-"and is optimal for complex polygonal concave collisions. However, it is not "
-"advised to use for [RigidBody2D] nodes. A CollisionPolygon2D in convex "
-"decomposition mode (solids) or several convex objects are advised for that "
-"instead. Otherwise, a concave polygon 2D shape is better for static "
-"collisions.\n"
-"The main difference between a [ConvexPolygonShape2D] and a "
-"[ConcavePolygonShape2D] is that a concave polygon assumes it is concave and "
-"uses a more complex method of collision detection, and a convex one forces "
-"itself to be convex in order to speed up collision detection.\n"
-"[b]Warning:[/b] Using this shape for an [Area2D] (via a [CollisionShape2D] "
-"node) may give unexpected results: the area will only detect collisions with "
-"the segments in the [ConcavePolygonShape2D] (and not with any \"inside\" of "
-"the shape, for example)."
-msgstr ""
-
-#: doc/classes/ConcavePolygonShape2D.xml
-msgid ""
-"The array of points that make up the [ConcavePolygonShape2D]'s line segments."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml
-msgid "A twist joint between two 3D PhysicsBodies."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml
-msgid ""
-"The joint can rotate the bodies across an axis defined by the local x-axes "
-"of the [Joint].\n"
-"The twist axis is initiated as the X axis of the [Joint].\n"
-"Once the Bodies swing, the twist axis is calculated as the middle of the x-"
-"axes of the Joint in the local space of the two Bodies. See also "
-"[Generic6DOFJoint]."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The speed with which the swing or twist will take place.\n"
-"The higher, the faster."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Defines, how fast the swing- and twist-speed-difference on both sides gets "
-"synced."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml
-msgid ""
-"The ease with which the joint starts to twist. If it's too low, it takes "
-"more force to start twisting the joint."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Swing is rotation from side to side, around the axis perpendicular to the "
-"twist axis.\n"
-"The swing span defines, how much rotation will not get corrected along the "
-"swing axis.\n"
-"Could be defined as looseness in the [ConeTwistJoint].\n"
-"If below 0.05, this behavior is locked."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Twist is the rotation around the twist axis, this value defined how far the "
-"joint can twist.\n"
-"Twist is locked if below 0.05."
-msgstr ""
-
-#: doc/classes/ConeTwistJoint.xml doc/classes/Generic6DOFJoint.xml
-#: doc/classes/HingeJoint.xml doc/classes/Light.xml doc/classes/SliderJoint.xml
-msgid "Represents the size of the [enum Param] enum."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid "Helper class to handle INI-style files."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"This helper class can be used to store [Variant] values on the filesystem "
-"using INI-style formatting. The stored values are identified by a section "
-"and a key:\n"
-"[codeblock]\n"
-"[section]\n"
-"some_key=42\n"
-"string_example=\"Hello World!\"\n"
-"a_vector=Vector3( 1, 0, 2 )\n"
-"[/codeblock]\n"
-"The stored data can be saved to or parsed from a file, though ConfigFile "
-"objects can also be used directly without accessing the filesystem.\n"
-"The following example shows how to create a simple [ConfigFile] and save it "
-"on disk:\n"
-"[codeblock]\n"
-"# Create new ConfigFile object.\n"
-"var config = ConfigFile.new()\n"
-"\n"
-"# Store some values.\n"
-"config.set_value(\"Player1\", \"player_name\", \"Steve\")\n"
-"config.set_value(\"Player1\", \"best_score\", 10)\n"
-"config.set_value(\"Player2\", \"player_name\", \"V3geta\")\n"
-"config.set_value(\"Player2\", \"best_score\", 9001)\n"
-"\n"
-"# Save it to a file (overwrite if already exists).\n"
-"config.save(\"user://scores.cfg\")\n"
-"[/codeblock]\n"
-"This example shows how the above file could be loaded:\n"
-"[codeblock]\n"
-"var score_data = {}\n"
-"var config = ConfigFile.new()\n"
-"\n"
-"# Load data from a file.\n"
-"var err = config.load(\"user://scores.cfg\")\n"
-"\n"
-"# If the file didn't load, ignore it.\n"
-"if err != OK:\n"
-"    return\n"
-"\n"
-"# Iterate over all sections.\n"
-"for player in config.get_sections():\n"
-"    # Fetch the data for each section.\n"
-"    var player_name = config.get_value(player, \"player_name\")\n"
-"    var player_score = config.get_value(player, \"best_score\")\n"
-"    score_data[player_name] = player_score\n"
-"[/codeblock]\n"
-"Any operation that mutates the ConfigFile such as [method set_value], "
-"[method clear], or [method erase_section], only changes what is loaded in "
-"memory. If you want to write the change to a file, you have to save the "
-"changes with [method save], [method save_encrypted], or [method "
-"save_encrypted_pass].\n"
-"Keep in mind that section and property names can't contain spaces. Anything "
-"after a space will be ignored on save and on load.\n"
-"ConfigFiles can also contain manually written comment lines starting with a "
-"semicolon ([code];[/code]). Those lines will be ignored when parsing the "
-"file. Note that comments will be lost when saving the ConfigFile. This can "
-"still be useful for dedicated server configuration files, which are "
-"typically never overwritten without explicit user action.\n"
-"[b]Note:[/b] The file extension given to a ConfigFile does not have any "
-"impact on its formatting or behavior. By convention, the [code].cfg[/code] "
-"extension is used here, but any other extension such as [code].ini[/code] is "
-"also valid. Since neither [code].cfg[/code] nor [code].ini[/code] are "
-"standardized, Godot's ConfigFile formatting may differ from files written by "
-"other programs."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid "Removes the entire contents of the config."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Deletes the specified section along with all the key-value pairs inside. "
-"Raises an error if the section does not exist."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Deletes the specified key in a section. Raises an error if either the "
-"section or the key do not exist."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Returns an array of all defined key identifiers in the specified section. "
-"Raises an error and returns an empty array if the section does not exist."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid "Returns an array of all defined section identifiers."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Returns the current value for the specified section and key. If either the "
-"section or the key do not exist, the method returns the fallback "
-"[code]default[/code] value. If [code]default[/code] is not specified or set "
-"to [code]null[/code], an error is also raised."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid "Returns [code]true[/code] if the specified section exists."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid "Returns [code]true[/code] if the specified section-key pair exists."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Loads the config file specified as a parameter. The file's contents are "
-"parsed and loaded in the [ConfigFile] object which the method was called "
-"on.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Loads the encrypted config file specified as a parameter, using the provided "
-"[code]key[/code] to decrypt it. The file's contents are parsed and loaded in "
-"the [ConfigFile] object which the method was called on.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Loads the encrypted config file specified as a parameter, using the provided "
-"[code]password[/code] to decrypt it. The file's contents are parsed and "
-"loaded in the [ConfigFile] object which the method was called on.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Parses the passed string as the contents of a config file. The string is "
-"parsed and loaded in the ConfigFile object which the method was called on.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Saves the contents of the [ConfigFile] object to the file specified as a "
-"parameter. The output file uses an INI-style structure.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Saves the contents of the [ConfigFile] object to the AES-256 encrypted file "
-"specified as a parameter, using the provided [code]key[/code] to encrypt it. "
-"The output file uses an INI-style structure.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Saves the contents of the [ConfigFile] object to the AES-256 encrypted file "
-"specified as a parameter, using the provided [code]password[/code] to "
-"encrypt it. The output file uses an INI-style structure.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/ConfigFile.xml
-msgid ""
-"Assigns a value to the specified key of the specified section. If either the "
-"section or the key do not exist, they are created. Passing a [code]null[/"
-"code] value deletes the specified key if it exists, and deletes the section "
-"if it ends up empty once the key has been removed."
-msgstr ""
-
-#: doc/classes/ConfirmationDialog.xml
-msgid "Dialog for confirmation of actions."
-msgstr ""
-
-#: doc/classes/ConfirmationDialog.xml
-msgid ""
-"Dialog for confirmation of actions. This dialog inherits from "
-"[AcceptDialog], but has by default an OK and Cancel button (in host OS "
-"order).\n"
-"To get cancel action, you can use:\n"
-"[codeblock]\n"
-"get_cancel().connect(\"pressed\", self, \"cancelled\")\n"
-"[/codeblock]."
-msgstr ""
-
-#: doc/classes/ConfirmationDialog.xml
-msgid ""
-"Returns the cancel button.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/Container.xml
-msgid "Base node for containers."
-msgstr ""
-
-#: doc/classes/Container.xml
-msgid ""
-"Base node for containers. A [Container] contains other controls and "
-"automatically arranges them in a certain way.\n"
-"A Control can inherit this to create custom container classes."
-msgstr ""
-
-#: doc/classes/Container.xml
-msgid ""
-"Fit a child control in a given rect. This is mainly a helper for creating "
-"custom container classes."
-msgstr ""
-
-#: doc/classes/Container.xml
-msgid ""
-"Queue resort of the contained children. This is called automatically anyway, "
-"but can be called upon request."
-msgstr ""
-
-#: doc/classes/Container.xml
-msgid "Emitted when sorting the children is needed."
-msgstr ""
-
-#: doc/classes/Container.xml
-msgid ""
-"Notification for when sorting the children, it must be obeyed immediately."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"All user interface nodes inherit from Control. A control's anchors and "
-"margins adapt its position and size relative to its parent."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Base class for all UI-related nodes. [Control] features a bounding rectangle "
-"that defines its extents, an anchor position relative to its parent control "
-"or the current viewport, and margins that represent an offset to the anchor. "
-"The margins update automatically when the node, any of its parents, or the "
-"screen size change.\n"
-"For more information on Godot's UI system, anchors, margins, and containers, "
-"see the related tutorials in the manual. To build flexible UIs, you'll need "
-"a mix of UI elements that inherit from [Control] and [Container] nodes.\n"
-"[b]User Interface nodes and input[/b]\n"
-"Godot sends input events to the scene's root node first, by calling [method "
-"Node._input]. [method Node._input] forwards the event down the node tree to "
-"the nodes under the mouse cursor, or on keyboard focus. To do so, it calls "
-"[method MainLoop._input_event]. Call [method accept_event] so no other node "
-"receives the event. Once you accept an input, it becomes handled so [method "
-"Node._unhandled_input] will not process it.\n"
-"Only one [Control] node can be in keyboard focus. Only the node in focus "
-"will receive keyboard events. To get the focus, call [method grab_focus]. "
-"[Control] nodes lose focus when another node grabs it, or if you hide the "
-"node in focus.\n"
-"Sets [member mouse_filter] to [constant MOUSE_FILTER_IGNORE] to tell a "
-"[Control] node to ignore mouse or touch events. You'll need it if you place "
-"an icon on top of a button.\n"
-"[Theme] resources change the Control's appearance. If you change the [Theme] "
-"on a [Control] node, it affects all of its children. To override some of the "
-"theme's parameters, call one of the [code]add_*_override[/code] methods, "
-"like [method add_font_override]. You can override the theme with the "
-"inspector.\n"
-"[b]Note:[/b] Theme items are [i]not[/i] [Object] properties. This means you "
-"can't access their values using [method Object.get] and [method Object.set]. "
-"Instead, use [method get_color], [method get_constant], [method get_font], "
-"[method get_icon], [method get_stylebox], and the [code]add_*_override[/"
-"code] methods provided by this class."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "GUI tutorial index"
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid "Control node gallery"
-msgstr "Control Taste."
-
-#: doc/classes/Control.xml
-msgid "All GUI Demos"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Virtual method to be implemented by the user. Returns whether [method "
-"_gui_input] should not be called for children controls outside this "
-"control's rectangle. Input will be clipped to the Rect of this [Control]. "
-"Similar to [member rect_clip_content], but doesn't affect visibility.\n"
-"If not overridden, defaults to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Virtual method to be implemented by the user. Returns the minimum size for "
-"this control. Alternative to [member rect_min_size] for controlling minimum "
-"size via code. The actual minimum size will be the max value of these two "
-"(in each axis separately).\n"
-"If not overridden, defaults to [constant Vector2.ZERO].\n"
-"[b]Note:[/b] This method will not be called when the script is attached to a "
-"[Control] node that already overrides its minimum size (e.g. [Label], "
-"[Button], [PanelContainer] etc.). It can only be used with most basic GUI "
-"nodes, like [Control], [Container], [Panel] etc."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Virtual method to be implemented by the user. Use this method to process and "
-"accept inputs on UI elements. See [method accept_event].\n"
-"Example: clicking a control.\n"
-"[codeblock]\n"
-"func _gui_input(event):\n"
-"    if event is InputEventMouseButton:\n"
-"        if event.button_index == BUTTON_LEFT and event.pressed:\n"
-"            print(\"I've been clicked D:\")\n"
-"[/codeblock]\n"
-"The event won't trigger if:\n"
-"* clicking outside the control (see [method has_point]);\n"
-"* control has [member mouse_filter] set to [constant MOUSE_FILTER_IGNORE];\n"
-"* control is obstructed by another [Control] on top of it, which doesn't "
-"have [member mouse_filter] set to [constant MOUSE_FILTER_IGNORE];\n"
-"* control's parent has [member mouse_filter] set to [constant "
-"MOUSE_FILTER_STOP] or has accepted the event;\n"
-"* it happens outside the parent's rectangle and the parent has either "
-"[member rect_clip_content] or [method _clips_input] enabled.\n"
-"[b]Note:[/b] Event position is relative to the control origin."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Virtual method to be implemented by the user. Returns a [Control] node that "
-"should be used as a tooltip instead of the default one. The [code]for_text[/"
-"code] includes the contents of the [member hint_tooltip] property.\n"
-"The returned node must be of type [Control] or Control-derived. It can have "
-"child nodes of any type. It is freed when the tooltip disappears, so make "
-"sure you always provide a new instance (if you want to use a pre-existing "
-"node from your scene tree, you can duplicate it and pass the duplicated "
-"instance). When [code]null[/code] or a non-Control node is returned, the "
-"default tooltip will be used instead.\n"
-"The returned node will be added as child to a [PopupPanel], so you should "
-"only provide the contents of that panel. That [PopupPanel] can be themed "
-"using [method Theme.set_stylebox] for the type [code]\"TooltipPanel\"[/code] "
-"(see [member hint_tooltip] for an example).\n"
-"[b]Note:[/b] The tooltip is shrunk to minimal size. If you want to ensure "
-"it's fully visible, you might want to set its [member rect_min_size] to some "
-"non-zero value.\n"
-"Example of usage with a custom-constructed node:\n"
-"[codeblock]\n"
-"func _make_custom_tooltip(for_text):\n"
-"    var label = Label.new()\n"
-"    label.text = for_text\n"
-"    return label\n"
-"[/codeblock]\n"
-"Example of usage with a custom scene instance:\n"
-"[codeblock]\n"
-"func _make_custom_tooltip(for_text):\n"
-"    var tooltip = preload(\"res://SomeTooltipScene.tscn\").instance()\n"
-"    tooltip.get_node(\"Label\").text = for_text\n"
-"    return tooltip\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Marks an input event as handled. Once you accept an input event, it stops "
-"propagating, even to nodes listening to [method Node._unhandled_input] or "
-"[method Node._unhandled_key_input]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Creates a local override for a theme [Color] with the specified [code]name[/"
-"code]. Local overrides always take precedence when fetching theme items for "
-"the control.\n"
-"See also [method get_color], [method remove_color_override].\n"
-"[b]Example of overriding a label's color and resetting it later:[/b]\n"
-"[codeblock]\n"
-"# Given the child Label node \"MyLabel\", override its font color with a "
-"custom value.\n"
-"$MyLabel.add_color_override(\"font_color\", Color(1, 0.5, 0))\n"
-"# Reset the font color of the child label.\n"
-"$MyLabel.add_color_override(\"font_color\", get_color(\"font_color\", "
-"\"Label\"))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Creates a local override for a theme constant with the specified [code]name[/"
-"code]. Local overrides always take precedence when fetching theme items for "
-"the control.\n"
-"See also [method get_constant], [method remove_constant_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Creates a local override for a theme [Font] with the specified [code]name[/"
-"code]. Local overrides always take precedence when fetching theme items for "
-"the control.\n"
-"[b]Note:[/b] An override can be removed by assigning it a [code]null[/code] "
-"value. This behavior is deprecated and will be removed in 4.0, use [method "
-"remove_font_override] instead.\n"
-"See also [method get_font]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Creates a local override for a theme icon with the specified [code]name[/"
-"code]. Local overrides always take precedence when fetching theme items for "
-"the control.\n"
-"[b]Note:[/b] An override can be removed by assigning it a [code]null[/code] "
-"value. This behavior is deprecated and will be removed in 4.0, use [method "
-"remove_icon_override] instead.\n"
-"See also [method get_icon]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Creates a local override for a theme shader with the specified [code]name[/"
-"code]. Local overrides always take precedence when fetching theme items for "
-"the control.\n"
-"[b]Note:[/b] An override can be removed by assigning it a [code]null[/code] "
-"value. This behavior is deprecated and will be removed in 4.0, use [method "
-"remove_shader_override] instead."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Creates a local override for a theme [StyleBox] with the specified "
-"[code]name[/code]. Local overrides always take precedence when fetching "
-"theme items for the control.\n"
-"[b]Note:[/b] An override can be removed by assigning it a [code]null[/code] "
-"value. This behavior is deprecated and will be removed in 4.0, use [method "
-"remove_stylebox_override] instead.\n"
-"See also [method get_stylebox].\n"
-"[b]Example of modifying a property in a StyleBox by duplicating it:[/b]\n"
-"[codeblock]\n"
-"# The snippet below assumes the child node MyButton has a StyleBoxFlat "
-"assigned.\n"
-"# Resources are shared across instances, so we need to duplicate it\n"
-"# to avoid modifying the appearance of all other buttons.\n"
-"var new_stylebox_normal = $MyButton.get_stylebox(\"normal\").duplicate()\n"
-"new_stylebox_normal.border_width_top = 3\n"
-"new_stylebox_normal.border_color = Color(0, 1, 0.5)\n"
-"$MyButton.add_stylebox_override(\"normal\", new_stylebox_normal)\n"
-"# Remove the stylebox override.\n"
-"$MyButton.add_stylebox_override(\"normal\", null)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Godot calls this method to test if [code]data[/code] from a control's "
-"[method get_drag_data] can be dropped at [code]position[/code]. "
-"[code]position[/code] is local to this control.\n"
-"This method should only be used to test the data. Process the data in "
-"[method drop_data].\n"
-"[codeblock]\n"
-"func can_drop_data(position, data):\n"
-"    # Check position if it is relevant to you\n"
-"    # Otherwise, just check data\n"
-"    return typeof(data) == TYPE_DICTIONARY and data.has(\"expected\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Godot calls this method to pass you the [code]data[/code] from a control's "
-"[method get_drag_data] result. Godot first calls [method can_drop_data] to "
-"test if [code]data[/code] is allowed to drop at [code]position[/code] where "
-"[code]position[/code] is local to this control.\n"
-"[codeblock]\n"
-"func can_drop_data(position, data):\n"
-"    return typeof(data) == TYPE_DICTIONARY and data.has(\"color\")\n"
-"\n"
-"func drop_data(position, data):\n"
-"    color = data[\"color\"]\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Finds the next (below in the tree) [Control] that can receive the focus."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Finds the previous (above in the tree) [Control] that can receive the focus."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Forces drag and bypasses [method get_drag_data] and [method "
-"set_drag_preview] by passing [code]data[/code] and [code]preview[/code]. "
-"Drag will start even if the mouse is neither over nor pressed on this "
-"control.\n"
-"The methods [method can_drop_data] and [method drop_data] must be "
-"implemented on controls that want to receive drop data."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the anchor identified by [code]margin[/code] constant from [enum "
-"Margin] enum. A getter method for [member anchor_bottom], [member "
-"anchor_left], [member anchor_right] and [member anchor_top]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns [member margin_left] and [member margin_top]. See also [member "
-"rect_position]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns a [Color] from the first matching [Theme] in the tree if that "
-"[Theme] has a color item with the specified [code]name[/code] and "
-"[code]theme_type[/code]. If [code]theme_type[/code] is omitted the class "
-"name of the current control is used as the type, or [member "
-"theme_type_variation] if it is defined. If the type is a class name its "
-"parent classes are also checked, in order of inheritance.\n"
-"For the current control its local overrides are considered first (see "
-"[method add_color_override]), then its assigned [member theme]. After the "
-"current control, each parent control and its assigned [member theme] are "
-"considered; controls without a [member theme] assigned are skipped. If no "
-"matching [Theme] is found in the tree, a custom project [Theme] (see [member "
-"ProjectSettings.gui/theme/custom]) and the default [Theme] are used.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    # Get the font color defined for the current Control's class, if it "
-"exists.\n"
-"    modulate = get_color(\"font_color\")\n"
-"    # Get the font color defined for the Button class.\n"
-"    modulate = get_color(\"font_color\", \"Button\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns combined minimum size from [member rect_min_size] and [method "
-"get_minimum_size]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns a constant from the first matching [Theme] in the tree if that "
-"[Theme] has a constant item with the specified [code]name[/code] and "
-"[code]theme_type[/code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the mouse cursor shape the control displays on mouse hover. See "
-"[enum CursorShape]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Godot calls this method to get data that can be dragged and dropped onto "
-"controls that expect drop data. Returns [code]null[/code] if there is no "
-"data to drag. Controls that want to receive drop data should implement "
-"[method can_drop_data] and [method drop_data]. [code]position[/code] is "
-"local to this control. Drag may be forced with [method force_drag].\n"
-"A preview that will follow the mouse that should represent the data can be "
-"set with [method set_drag_preview]. A good time to set the preview is in "
-"this method.\n"
-"[codeblock]\n"
-"func get_drag_data(position):\n"
-"    var mydata = make_data()\n"
-"    set_drag_preview(make_preview(mydata))\n"
-"    return mydata\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Returns [member margin_right] and [member margin_bottom]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the focus neighbour identified by [code]margin[/code] constant from "
-"[enum Margin] enum. A getter method for [member focus_neighbour_bottom], "
-"[member focus_neighbour_left], [member focus_neighbour_right] and [member "
-"focus_neighbour_top]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the control that has the keyboard focus or [code]null[/code] if none."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns a [Font] from the first matching [Theme] in the tree if that [Theme] "
-"has a font item with the specified [code]name[/code] and [code]theme_type[/"
-"code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the position and size of the control relative to the top-left corner "
-"of the screen. See [member rect_position] and [member rect_size]."
-msgstr ""
-"Gibt die Position und Größe des Control zurück. Die Werte sind relativ zur "
-"oberen linken Ecke des Bildschirms. Siehe [member rect_position] und [member "
-"rect_size]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns an icon from the first matching [Theme] in the tree if that [Theme] "
-"has an icon item with the specified [code]name[/code] and [code]theme_type[/"
-"code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the anchor identified by [code]margin[/code] constant from [enum "
-"Margin] enum. A getter method for [member margin_bottom], [member "
-"margin_left], [member margin_right] and [member margin_top]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Returns the minimum size for this control. See [member rect_min_size]."
-msgstr ""
-"Gibt die minimale Größe dieses Controls zurück. Siehe [member rect_min_size]."
-
-#: doc/classes/Control.xml
-msgid "Returns the width/height occupied in the parent control."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Returns the parent control node."
-msgstr "Gibt das übergeordnete Control Node zurück."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the position and size of the control relative to the top-left corner "
-"of the parent Control. See [member rect_position] and [member rect_size]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Returns the rotation (in radians)."
-msgstr "Gibt die Rotation in Radians zurück."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns a [StyleBox] from the first matching [Theme] in the tree if that "
-"[Theme] has a stylebox item with the specified [code]name[/code] and "
-"[code]theme_type[/code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the default font from the first matching [Theme] in the tree if that "
-"[Theme] has a valid [member Theme.default_font] value.\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns the tooltip, which will appear when the cursor is resting over this "
-"control. See [member hint_tooltip]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Creates an [InputEventMouseButton] that attempts to click the control. If "
-"the event is received, the control acquires focus.\n"
-"[codeblock]\n"
-"func _process(delta):\n"
-"    grab_click_focus() #when clicking another Control node, this node will "
-"be clicked instead\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Steal the focus from another control and become the focused control (see "
-"[member focus_mode]).\n"
-"[b]Note[/b]: Using this method together with [method Object.call_deferred] "
-"makes it more reliable, especially when called inside [method Node._ready]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns [code]true[/code] if there is a matching [Theme] in the tree that "
-"has a color item with the specified [code]name[/code] and [code]theme_type[/"
-"code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a local override for a theme [Color] "
-"with the specified [code]name[/code] in this [Control] node.\n"
-"See [method add_color_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns [code]true[/code] if there is a matching [Theme] in the tree that "
-"has a constant item with the specified [code]name[/code] and "
-"[code]theme_type[/code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a local override for a theme constant "
-"with the specified [code]name[/code] in this [Control] node.\n"
-"See [method add_constant_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns [code]true[/code] if this is the current focused control. See "
-"[member focus_mode]."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a matching [Theme] in the tree that "
-"has a font item with the specified [code]name[/code] and [code]theme_type[/"
-"code].\n"
-"See [method get_color] for details."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a local override for a theme [Font] "
-"with the specified [code]name[/code] in this [Control] node.\n"
-"See [method add_font_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a matching [Theme] in the tree that "
-"has an icon item with the specified [code]name[/code] and [code]theme_type[/"
-"code].\n"
-"See [method get_color] for details."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a local override for a theme icon with "
-"the specified [code]name[/code] in this [Control] node.\n"
-"See [method add_icon_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Virtual method to be implemented by the user. Returns whether the given "
-"[code]point[/code] is inside this control.\n"
-"If not overridden, default behavior is checking if the point is within "
-"control's Rect.\n"
-"[b]Note:[/b] If you want to check if a point is inside the control, you can "
-"use [code]get_rect().has_point(point)[/code]."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a local override for a theme shader "
-"with the specified [code]name[/code] in this [Control] node.\n"
-"See [method add_shader_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns [code]true[/code] if there is a matching [Theme] in the tree that "
-"has a stylebox item with the specified [code]name[/code] and "
-"[code]theme_type[/code].\n"
-"See [method get_color] for details."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if there is a local override for a theme "
-"[StyleBox] with the specified [code]name[/code] in this [Control] node.\n"
-"See [method add_stylebox_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Returns [code]true[/code] if a drag operation is successful. Alternative to "
-"[method Viewport.gui_is_drag_successful].\n"
-"Best used with [constant Node.NOTIFICATION_DRAG_END]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Invalidates the size cache in this node and in parent nodes up to toplevel. "
-"Intended to be used with [method get_minimum_size] when the return value is "
-"changed. Setting [member rect_min_size] directly calls this method "
-"automatically."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Give up the focus. No other control will be able to receive keyboard input."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Removes a theme override for a [Color] with the given [code]name[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Removes a theme override for a constant with the given [code]name[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid "Removes a theme override for a [Font] with the given [code]name[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid "Removes a theme override for an icon with the given [code]name[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid "Removes a theme override for a shader with the given [code]name[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid ""
-"Removes a theme override for a [StyleBox] with the given [code]name[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the anchor identified by [code]margin[/code] constant from [enum "
-"Margin] enum to value [code]anchor[/code]. A setter method for [member "
-"anchor_bottom], [member anchor_left], [member anchor_right] and [member "
-"anchor_top].\n"
-"If [code]keep_margin[/code] is [code]true[/code], margins aren't updated "
-"after this operation.\n"
-"If [code]push_opposite_anchor[/code] is [code]true[/code] and the opposite "
-"anchor overlaps this anchor, the opposite one will have its value "
-"overridden. For example, when setting left anchor to 1 and the right anchor "
-"has value of 0.5, the right anchor will also get value of 1. If "
-"[code]push_opposite_anchor[/code] was [code]false[/code], the left anchor "
-"would get value 0.5."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Works the same as [method set_anchor], but instead of [code]keep_margin[/"
-"code] argument and automatic update of margin, it allows to set the margin "
-"offset yourself (see [method set_margin])."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets both anchor preset and margin preset. See [method set_anchors_preset] "
-"and [method set_margins_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the anchors to a [code]preset[/code] from [enum Control.LayoutPreset] "
-"enum. This is the code equivalent to using the Layout menu in the 2D "
-"editor.\n"
-"If [code]keep_margins[/code] is [code]true[/code], control's position will "
-"also be updated."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets [member margin_left] and [member margin_top] at the same time. "
-"Equivalent of changing [member rect_position]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Forwards the handling of this control's drag and drop to [code]target[/code] "
-"control.\n"
-"Forwarding can be implemented in the target control similar to the methods "
-"[method get_drag_data], [method can_drop_data], and [method drop_data] but "
-"with two differences:\n"
-"1. The function name must be suffixed with [b]_fw[/b]\n"
-"2. The function must take an extra argument that is the control doing the "
-"forwarding\n"
-"[codeblock]\n"
-"# ThisControl.gd\n"
-"extends Control\n"
-"func _ready():\n"
-"    set_drag_forwarding(target_control)\n"
-"\n"
-"# TargetControl.gd\n"
-"extends Control\n"
-"func can_drop_data_fw(position, data, from_control):\n"
-"    return true\n"
-"\n"
-"func drop_data_fw(position, data, from_control):\n"
-"    my_handle_data(data)\n"
-"\n"
-"func get_drag_data_fw(position, from_control):\n"
-"    set_drag_preview(my_preview)\n"
-"    return my_data()\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Shows the given control at the mouse pointer. A good time to call this "
-"method is in [method get_drag_data]. The control must not be in the scene "
-"tree. You should not free the control, and you should not keep a reference "
-"to the control beyond the duration of the drag. It will be deleted "
-"automatically after the drag has ended.\n"
-"[codeblock]\n"
-"export (Color, RGBA) var color = Color(1, 0, 0, 1)\n"
-"\n"
-"func get_drag_data(position):\n"
-"    # Use a control that is not in the tree\n"
-"    var cpb = ColorPickerButton.new()\n"
-"    cpb.color = color\n"
-"    cpb.rect_size = Vector2(50, 50)\n"
-"    set_drag_preview(cpb)\n"
-"    return color\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sets [member margin_right] and [member margin_bottom] at the same time."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the anchor identified by [code]margin[/code] constant from [enum "
-"Margin] enum to [Control] at [code]neighbor[/code] node path. A setter "
-"method for [member focus_neighbour_bottom], [member focus_neighbour_left], "
-"[member focus_neighbour_right] and [member focus_neighbour_top]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the [member rect_global_position] to given [code]position[/code].\n"
-"If [code]keep_margins[/code] is [code]true[/code], control's anchors will be "
-"updated instead of margins."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the margin identified by [code]margin[/code] constant from [enum "
-"Margin] enum to given [code]offset[/code]. A setter method for [member "
-"margin_bottom], [member margin_left], [member margin_right] and [member "
-"margin_top]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the margins to a [code]preset[/code] from [enum Control.LayoutPreset] "
-"enum. This is the code equivalent to using the Layout menu in the 2D "
-"editor.\n"
-"Use parameter [code]resize_mode[/code] with constants from [enum Control."
-"LayoutPresetMode] to better determine the resulting size of the [Control]. "
-"Constant size will be ignored if used with presets that change size, e.g. "
-"[code]PRESET_LEFT_WIDE[/code].\n"
-"Use parameter [code]margin[/code] to determine the gap between the [Control] "
-"and the edges."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the [member rect_position] to given [code]position[/code].\n"
-"If [code]keep_margins[/code] is [code]true[/code], control's anchors will be "
-"updated instead of margins."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sets the rotation (in radians)."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the size (see [member rect_size]).\n"
-"If [code]keep_margins[/code] is [code]true[/code], control's anchors will be "
-"updated instead of margins."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Displays a control as modal. Control must be a subwindow. Modal controls "
-"capture the input signals until closed or the area outside them is accessed. "
-"When a modal control loses focus, or the ESC key is pressed, they "
-"automatically hide. Modal controls are used extensively for popup dialogs "
-"and menus.\n"
-"If [code]exclusive[/code] is [code]true[/code], other controls will not "
-"receive input and clicking outside this control will not close it."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Moves the mouse cursor to [code]to_position[/code], relative to [member "
-"rect_position] of this [Control]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Anchors the bottom edge of the node to the origin, the center, or the end of "
-"its parent control. It changes how the bottom margin updates when the node "
-"moves or changes size. You can use one of the [enum Anchor] constants for "
-"convenience."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Anchors the left edge of the node to the origin, the center or the end of "
-"its parent control. It changes how the left margin updates when the node "
-"moves or changes size. You can use one of the [enum Anchor] constants for "
-"convenience."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Anchors the right edge of the node to the origin, the center or the end of "
-"its parent control. It changes how the right margin updates when the node "
-"moves or changes size. You can use one of the [enum Anchor] constants for "
-"convenience."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Anchors the top edge of the node to the origin, the center or the end of its "
-"parent control. It changes how the top margin updates when the node moves or "
-"changes size. You can use one of the [enum Anchor] constants for convenience."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The focus access mode for the control (None, Click or All). Only one Control "
-"can be focused at the same time, and it will receive keyboard signals."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells Godot which node it should give keyboard focus to if the user presses "
-"the down arrow on the keyboard or down on a gamepad by default. You can "
-"change the key by editing the [code]ui_down[/code] input action. The node "
-"must be a [Control]. If this property is not set, Godot will give focus to "
-"the closest [Control] to the bottom of this one."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells Godot which node it should give keyboard focus to if the user presses "
-"the left arrow on the keyboard or left on a gamepad by default. You can "
-"change the key by editing the [code]ui_left[/code] input action. The node "
-"must be a [Control]. If this property is not set, Godot will give focus to "
-"the closest [Control] to the left of this one."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells Godot which node it should give keyboard focus to if the user presses "
-"the right arrow on the keyboard or right on a gamepad by default. You can "
-"change the key by editing the [code]ui_right[/code] input action. The node "
-"must be a [Control]. If this property is not set, Godot will give focus to "
-"the closest [Control] to the bottom of this one."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells Godot which node it should give keyboard focus to if the user presses "
-"the top arrow on the keyboard or top on a gamepad by default. You can change "
-"the key by editing the [code]ui_top[/code] input action. The node must be a "
-"[Control]. If this property is not set, Godot will give focus to the closest "
-"[Control] to the bottom of this one."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells Godot which node it should give keyboard focus to if the user presses "
-"Tab on a keyboard by default. You can change the key by editing the "
-"[code]ui_focus_next[/code] input action.\n"
-"If this property is not set, Godot will select a \"best guess\" based on "
-"surrounding nodes in the scene tree."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells Godot which node it should give keyboard focus to if the user presses "
-"Shift+Tab on a keyboard by default. You can change the key by editing the "
-"[code]ui_focus_prev[/code] input action.\n"
-"If this property is not set, Godot will select a \"best guess\" based on "
-"surrounding nodes in the scene tree."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Controls the direction on the horizontal axis in which the control should "
-"grow if its horizontal minimum size is changed to be greater than its "
-"current size, as the control always has to be at least the minimum size."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Controls the direction on the vertical axis in which the control should grow "
-"if its vertical minimum size is changed to be greater than its current size, "
-"as the control always has to be at least the minimum size."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Changes the tooltip text. The tooltip appears when the user's mouse cursor "
-"stays idle over this control for a few moments, provided that the [member "
-"mouse_filter] property is not [constant MOUSE_FILTER_IGNORE]. You can change "
-"the time required for the tooltip to appear with [code]gui/timers/"
-"tooltip_delay_sec[/code] option in Project Settings.\n"
-"The tooltip popup will use either a default implementation, or a custom one "
-"that you can provide by overriding [method _make_custom_tooltip]. The "
-"default tooltip includes a [PopupPanel] and [Label] whose theme properties "
-"can be customized using [Theme] methods with the [code]\"TooltipPanel\"[/"
-"code] and [code]\"TooltipLabel\"[/code] respectively. For example:\n"
-"[codeblock]\n"
-"var style_box = StyleBoxFlat.new()\n"
-"style_box.set_bg_color(Color(1, 1, 0))\n"
-"style_box.set_border_width_all(2)\n"
-"# We assume here that the `theme` property has been assigned a custom Theme "
-"beforehand.\n"
-"theme.set_stylebox(\"panel\", \"TooltipPanel\", style_box)\n"
-"theme.set_color(\"font_color\", \"TooltipLabel\", Color(0, 1, 1))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Enables whether input should propagate when you close the control as modal.\n"
-"If [code]false[/code], stops event handling at the viewport input event "
-"handling. The viewport first hides the modal and after marks the input as "
-"handled."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Distance between the node's bottom edge and its parent control, based on "
-"[member anchor_bottom].\n"
-"Margins are often controlled by one or multiple parent [Container] nodes, so "
-"you should not modify them manually if your node is a direct child of a "
-"[Container]. Margins update automatically when you move or resize the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Distance between the node's left edge and its parent control, based on "
-"[member anchor_left].\n"
-"Margins are often controlled by one or multiple parent [Container] nodes, so "
-"you should not modify them manually if your node is a direct child of a "
-"[Container]. Margins update automatically when you move or resize the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Distance between the node's right edge and its parent control, based on "
-"[member anchor_right].\n"
-"Margins are often controlled by one or multiple parent [Container] nodes, so "
-"you should not modify them manually if your node is a direct child of a "
-"[Container]. Margins update automatically when you move or resize the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Distance between the node's top edge and its parent control, based on "
-"[member anchor_top].\n"
-"Margins are often controlled by one or multiple parent [Container] nodes, so "
-"you should not modify them manually if your node is a direct child of a "
-"[Container]. Margins update automatically when you move or resize the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The default cursor shape for this control. Useful for Godot plugins and "
-"applications or games that use the system's mouse cursors.\n"
-"[b]Note:[/b] On Linux, shapes may vary depending on the cursor theme of the "
-"system."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Controls whether the control will be able to receive mouse button input "
-"events through [method _gui_input] and how these events should be handled. "
-"Also controls whether the control can receive the [signal mouse_entered], "
-"and [signal mouse_exited] signals. See the constants to learn what each does."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Enables whether rendering of [CanvasItem] based children should be clipped "
-"to this control's rectangle. If [code]true[/code], parts of a child which "
-"would be visibly outside of this control's rectangle will not be rendered."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The node's global position, relative to the world (usually to the top-left "
-"corner of the window)."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The minimum size of the node's bounding rectangle. If you set it to a value "
-"greater than (0, 0), the node's bounding rectangle will always have at least "
-"this size, even if its content is smaller. If it's set to (0, 0), the node "
-"sizes automatically to fit its content, be it a texture or child nodes."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"By default, the node's pivot is its top-left corner. When you change its "
-"[member rect_rotation] or [member rect_scale], it will rotate or scale "
-"around this pivot. Set this property to [member rect_size] / 2 to pivot "
-"around the Control's center."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The node's position, relative to its parent. It corresponds to the "
-"rectangle's top-left corner. The property is not affected by [member "
-"rect_pivot_offset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The node's rotation around its pivot, in degrees. See [member "
-"rect_pivot_offset] to change the pivot's position."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The node's scale, relative to its [member rect_size]. Change this property "
-"to scale the node around its [member rect_pivot_offset]. The Control's "
-"[member hint_tooltip] will also scale according to this value.\n"
-"[b]Note:[/b] This property is mainly intended to be used for animation "
-"purposes. Text inside the Control will look pixelated or blurry when the "
-"Control is scaled. To support multiple resolutions in your project, use an "
-"appropriate viewport stretch mode as described in the [url=$DOCS_URL/"
-"tutorials/rendering/multiple_resolutions.html]documentation[/url] instead of "
-"scaling Controls individually.\n"
-"[b]Note:[/b] If the Control node is a child of a [Container] node, the scale "
-"will be reset to [code]Vector2(1, 1)[/code] when the scene is instanced. To "
-"set the Control's scale when it's instanced, wait for one frame using "
-"[code]yield(get_tree(), \"idle_frame\")[/code] then set its [member "
-"rect_scale] property."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The size of the node's bounding rectangle, in pixels. [Container] nodes "
-"update this property automatically."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells the parent [Container] nodes how they should resize and place the node "
-"on the X axis. Use one of the [enum SizeFlags] constants to change the "
-"flags. See the constants to learn what each does."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"If the node and at least one of its neighbours uses the [constant "
-"SIZE_EXPAND] size flag, the parent [Container] will let it take more or less "
-"space depending on this property. If this node has a stretch ratio of 2 and "
-"its neighbour a ratio of 1, this node will take two thirds of the available "
-"space."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells the parent [Container] nodes how they should resize and place the node "
-"on the Y axis. Use one of the [enum SizeFlags] constants to change the "
-"flags. See the constants to learn what each does."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Changing this property replaces the current [Theme] resource this node and "
-"all its [Control] children use."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The name of a theme type variation used by this [Control] to look up its own "
-"theme items. When empty, the class name of the node is used (e.g. "
-"[code]Button[/code] for the [Button] control), as well as the class names of "
-"all parent classes (in order of inheritance).\n"
-"When set, this property gives the highest priority to the type of the "
-"specified name. This type can in turn extend another type, forming a "
-"dependency chain. See [method Theme.set_type_variation]. If the theme item "
-"cannot be found using this type or its base types, lookup falls back on the "
-"class names.\n"
-"[b]Note:[/b] To look up [Control]'s own items use various [code]get_*[/code] "
-"methods without specifying [code]theme_type[/code].\n"
-"[b]Note:[/b] Theme items are looked for in the tree order, from branch to "
-"root, where each [Control] node is checked for its [member theme] property. "
-"The earliest match against any type/class name is returned. The project-"
-"level Theme and the default Theme are checked last."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Emitted when the node gains keyboard focus."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Emitted when the node loses keyboard focus."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Emitted when the node receives an [InputEvent]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Emitted when the node's minimum size changes."
-msgstr ""
-
-#: doc/classes/Control.xml
-#, fuzzy
-msgid "Emitted when a modal [Control] is closed. See [method show_modal]."
-msgstr ""
-"Wird ausgegeben, wenn eine benutzerdefinierte Taste gedrückt wird. Siehe "
-"[method add_button]."
-
-#: doc/classes/Control.xml
-msgid ""
-"Emitted when the mouse enters the control's [code]Rect[/code] area, provided "
-"its [member mouse_filter] lets the event reach it.\n"
-"[b]Note:[/b] [signal mouse_entered] will not be emitted if the mouse enters "
-"a child [Control] node before entering the parent's [code]Rect[/code] area, "
-"at least until the mouse is moved to reach the parent's [code]Rect[/code] "
-"area."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Emitted when the mouse leaves the control's [code]Rect[/code] area, provided "
-"its [member mouse_filter] lets the event reach it.\n"
-"[b]Note:[/b] [signal mouse_exited] will be emitted if the mouse enters a "
-"child [Control] node, even if the mouse cursor is still inside the parent's "
-"[code]Rect[/code] area.\n"
-"If you want to check whether the mouse truly left the area, ignoring any top "
-"nodes, you can use code like this:\n"
-"[codeblock]\n"
-"func _on_mouse_exited():\n"
-"    if not Rect2(Vector2(), rect_size)."
-"has_point(get_local_mouse_position()):\n"
-"        # Not hovering over area.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Emitted when the control changes size."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Emitted when one of the size flags changes. See [member "
-"size_flags_horizontal] and [member size_flags_vertical]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "The node cannot grab focus. Use with [member focus_mode]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The node can only grab focus on mouse clicks. Use with [member focus_mode]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The node can grab focus on mouse click or using the arrows and the Tab keys "
-"on the keyboard. Use with [member focus_mode]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sent when the node changes size. Use [member rect_size] to get the new size."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sent when the mouse pointer enters the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sent when the mouse pointer exits the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sent when the node grabs focus."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sent when the node loses focus."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sent when the node's [member theme] changes, right before Godot redraws the "
-"control. Happens when you call one of the [code]add_*_override[/code] "
-"methods."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Sent when an open modal dialog closes. See [method show_modal]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sent when this node is inside a [ScrollContainer] which has begun being "
-"scrolled."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sent when this node is inside a [ScrollContainer] which has stopped being "
-"scrolled."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's arrow mouse cursor when the user hovers the node. Use with "
-"[member mouse_default_cursor_shape]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's I-beam mouse cursor when the user hovers the node. The I-"
-"beam pointer has a shape similar to \"I\". It tells the user they can "
-"highlight or insert text."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's pointing hand mouse cursor when the user hovers the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "Show the system's cross mouse cursor when the user hovers the node."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's wait mouse cursor when the user hovers the node. Often an "
-"hourglass."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's busy mouse cursor when the user hovers the node. Often an "
-"arrow with a small hourglass."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's drag mouse cursor, often a closed fist or a cross symbol, "
-"when the user hovers the node. It tells the user they're currently dragging "
-"an item, like a node in the Scene dock."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's drop mouse cursor when the user hovers the node. It can be "
-"an open hand. It tells the user they can drop an item they're currently "
-"grabbing, like a node in the Scene dock."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's forbidden mouse cursor when the user hovers the node. "
-"Often a crossed circle."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's vertical resize mouse cursor when the user hovers the "
-"node. A double-headed vertical arrow. It tells the user they can resize the "
-"window or the panel vertically."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's horizontal resize mouse cursor when the user hovers the "
-"node. A double-headed horizontal arrow. It tells the user they can resize "
-"the window or the panel horizontally."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's window resize mouse cursor when the user hovers the node. "
-"The cursor is a double-headed arrow that goes from the bottom left to the "
-"top right. It tells the user they can resize the window or the panel both "
-"horizontally and vertically."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's window resize mouse cursor when the user hovers the node. "
-"The cursor is a double-headed arrow that goes from the top left to the "
-"bottom right, the opposite of [constant CURSOR_BDIAGSIZE]. It tells the user "
-"they can resize the window or the panel both horizontally and vertically."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's move mouse cursor when the user hovers the node. It shows "
-"2 double-headed arrows at a 90 degree angle. It tells the user they can move "
-"a UI element freely."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's vertical split mouse cursor when the user hovers the node. "
-"On Windows, it's the same as [constant CURSOR_VSIZE]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's horizontal split mouse cursor when the user hovers the "
-"node. On Windows, it's the same as [constant CURSOR_HSIZE]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Show the system's help mouse cursor when the user hovers the node, a "
-"question mark."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the top-left of the parent control's bounds. Use with "
-"[method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the top-right of the parent control's bounds. Use with "
-"[method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the bottom-left of the parent control's bounds. Use "
-"with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the bottom-right of the parent control's bounds. Use "
-"with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the center of the left edge of the parent control's "
-"bounds. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the center of the top edge of the parent control's "
-"bounds. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the center of the right edge of the parent control's "
-"bounds. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the center of the bottom edge of the parent control's "
-"bounds. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the center of the parent control's bounds. Use with "
-"[method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the left edge of the parent control. The left margin "
-"becomes relative to the left edge and the top margin relative to the top "
-"left corner of the node's parent. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the top edge of the parent control. The left margin "
-"becomes relative to the top left corner, the top margin relative to the top "
-"edge, and the right margin relative to the top right corner of the node's "
-"parent. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the right edge of the parent control. The right margin "
-"becomes relative to the right edge and the top margin relative to the top "
-"right corner of the node's parent. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the bottom edge of the parent control. The left margin "
-"becomes relative to the bottom left corner, the bottom margin relative to "
-"the bottom edge, and the right margin relative to the bottom right corner of "
-"the node's parent. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to a vertical line that cuts the parent control in half. "
-"Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to a horizontal line that cuts the parent control in "
-"half. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snap all 4 anchors to the respective corners of the parent control. Set all "
-"4 margins to 0 after you applied this preset and the [Control] will fit its "
-"parent control. This is equivalent to the \"Full Rect\" layout option in the "
-"editor. Use with [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "The control will be resized to its minimum size."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "The control's width will not change."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "The control's height will not change."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid "The control's size will not change."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells the parent [Container] to expand the bounds of this node to fill all "
-"the available space without pushing any other node. Use with [member "
-"size_flags_horizontal] and [member size_flags_vertical]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells the parent [Container] to let this node take all the available space "
-"on the axis you flag. If multiple neighboring nodes are set to expand, "
-"they'll share the space based on their stretch ratio. See [member "
-"size_flags_stretch_ratio]. Use with [member size_flags_horizontal] and "
-"[member size_flags_vertical]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Sets the node's size flags to both fill and expand. See the 2 constants "
-"above for more information."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells the parent [Container] to center the node in itself. It centers the "
-"control based on its bounding box, so it doesn't work with the fill or "
-"expand size flags. Use with [member size_flags_horizontal] and [member "
-"size_flags_vertical]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Tells the parent [Container] to align the node with its end, either the "
-"bottom or the right edge. It doesn't work with the fill or expand size "
-"flags. Use with [member size_flags_horizontal] and [member "
-"size_flags_vertical]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The control will receive mouse button input events through [method "
-"_gui_input] if clicked on. And the control will receive the [signal "
-"mouse_entered] and [signal mouse_exited] signals. These events are "
-"automatically marked as handled, and they will not propagate further to "
-"other controls. This also results in blocking signals in other controls."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The control will receive mouse button input events through [method "
-"_gui_input] if clicked on. And the control will receive the [signal "
-"mouse_entered] and [signal mouse_exited] signals. If this control does not "
-"handle the event, the parent control (if any) will be considered, and so on "
-"until there is no more parent control to potentially handle it. This also "
-"allows signals to fire in other controls. Even if no control handled it at "
-"all, the event will still be handled automatically, so unhandled input will "
-"not be fired."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The control will not receive mouse button input events through [method "
-"_gui_input]. The control will also not receive the [signal mouse_entered] "
-"nor [signal mouse_exited] signals. This will not block other controls from "
-"receiving these events or firing the signals. Ignored events will not be "
-"handled automatically."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The control will grow to the left or top to make up if its minimum size is "
-"changed to be greater than its current size on the respective axis."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The control will grow to the right or bottom to make up if its minimum size "
-"is changed to be greater than its current size on the respective axis."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"The control will grow in both directions equally to make up if its minimum "
-"size is changed to be greater than its current size."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snaps one of the 4 anchor's sides to the origin of the node's [code]Rect[/"
-"code], in the top left. Use it with one of the [code]anchor_*[/code] member "
-"variables, like [member anchor_left]. To change all 4 anchors at once, use "
-"[method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/Control.xml
-msgid ""
-"Snaps one of the 4 anchor's sides to the end of the node's [code]Rect[/"
-"code], in the bottom right. Use it with one of the [code]anchor_*[/code] "
-"member variables, like [member anchor_left]. To change all 4 anchors at "
-"once, use [method set_anchors_preset]."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape.xml
-msgid "Convex polygon shape for 3D physics."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape.xml
-msgid ""
-"Convex polygon shape resource, which can be added to a [PhysicsBody] or area."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape.xml
-msgid "The list of 3D points forming the convex polygon shape."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape2D.xml
-msgid "Convex polygon shape for 2D physics."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape2D.xml
-msgid ""
-"Convex polygon shape for 2D physics. A convex polygon, whatever its shape, "
-"is internally decomposed into as many convex polygons as needed to ensure "
-"all collision checks against it are always done on convex polygons (which "
-"are faster to check).\n"
-"The main difference between a [ConvexPolygonShape2D] and a "
-"[ConcavePolygonShape2D] is that a concave polygon assumes it is concave and "
-"uses a more complex method of collision detection, and a convex one forces "
-"itself to be convex in order to speed up collision detection."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape2D.xml
-msgid ""
-"Based on the set of points provided, this creates and assigns the [member "
-"points] property using the convex hull algorithm. Removing all unneeded "
-"points. See [method Geometry.convex_hull_2d] for details."
-msgstr ""
-
-#: doc/classes/ConvexPolygonShape2D.xml
-msgid ""
-"The polygon's list of vertices. Can be in either clockwise or "
-"counterclockwise order. Only set this property with convex hull points, use "
-"[method set_point_cloud] to generate a convex hull shape from concave shape "
-"points."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid "CPU-based 3D particle emitter."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"CPU-based 3D particle node used to create a variety of particle systems and "
-"effects.\n"
-"See also [Particles], which provides the same functionality with hardware "
-"acceleration, but may not run on older devices.\n"
-"[b]Note:[/b] Unlike [Particles], the visibility rect is generated on-the-fly "
-"and doesn't need to be configured by the user."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"Sets this node's properties to match a given [Particles] node with an "
-"assigned [ParticlesMaterial]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Returns the base value of the parameter specified by [enum Parameter]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Returns the [Curve] of the parameter specified by [enum Parameter]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Returns the randomness factor of the parameter specified by [enum Parameter]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Returns the enabled state of the given flag (see [enum Flags] for options)."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Restarts the particle emitter."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Sets the base value of the parameter specified by [enum Parameter]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Sets the [Curve] of the parameter specified by [enum Parameter]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Sets the randomness factor of the parameter specified by [enum Parameter]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Enables or disables the given flag (see [enum Flags] for options)."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid ""
-"The number of particles emitted in one emission cycle (corresponding to the "
-"[member lifetime]).\n"
-"[b]Note:[/b] Changing [member amount] will reset the particle emission, "
-"therefore removing all particles that were already emitted before changing "
-"[member amount]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Initial rotation applied to each particle, in degrees."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's rotation will be animated along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Rotation randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Initial angular velocity applied to each particle in [i]degrees[/i] per "
-"second. Sets the speed of rotation of the particle."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's angular velocity will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Angular velocity randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Particle animation offset."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's animation offset will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Animation offset randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Particle animation speed."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's animation speed will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Animation speed randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"Each particle's initial color. To have particle display color in a "
-"[SpatialMaterial] make sure to set [member SpatialMaterial."
-"vertex_color_use_as_albedo] to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's initial color will vary along this [GradientTexture] "
-"(multiplied with [member color])."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's color will vary along this [GradientTexture] over its "
-"lifetime (multiplied with [member color])."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "The rate at which particles lose velocity."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Damping will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Damping randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Unit vector specifying the particles' emission direction."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid "Particle draw order. Uses [enum DrawOrder] values."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The rectangle's extents if [member emission_shape] is set to [constant "
-"EMISSION_SHAPE_BOX]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Sets the [Color]s to modulate particles by when using [constant "
-"EMISSION_SHAPE_POINTS] or [constant EMISSION_SHAPE_DIRECTED_POINTS]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Sets the direction the particles will be emitted in when using [constant "
-"EMISSION_SHAPE_DIRECTED_POINTS]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Sets the initial positions to spawn particles when using [constant "
-"EMISSION_SHAPE_POINTS] or [constant EMISSION_SHAPE_DIRECTED_POINTS]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The axis for the ring shaped emitter when using [constant "
-"EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The height for the ring shaped emitter when using [constant "
-"EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The inner radius for the ring shaped emitter when using [constant "
-"EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The radius for the ring shaped emitter when using [constant "
-"EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Particles will be emitted inside this region. See [enum EmissionShape] for "
-"possible values."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The sphere's radius if [enum EmissionShape] is set to [constant "
-"EMISSION_SHAPE_SPHERE]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid "If [code]true[/code], particles are being emitted."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles2D.xml
-msgid ""
-"How rapidly particles in an emission cycle are emitted. If greater than "
-"[code]0[/code], there will be a gap in emissions before the next cycle "
-"begins."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The particle system's frame rate is fixed to a value. For instance, changing "
-"the value to 2 will make the particles render at 2 frames per second. Note "
-"this does not slow down the particle system itself."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Align Y axis of particle with the direction of its velocity."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
-msgid "If [code]true[/code], particles will not move on the z axis."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
-msgid "If [code]true[/code], particles rotate around Y axis by [member angle]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"Amount of [member spread] in Y/Z plane. A value of [code]1[/code] restricts "
-"particles to X/Z plane."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid ""
-"If [code]true[/code], results in fractional delta calculation which has a "
-"smoother particles display effect."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Gravity applied to every particle."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Initial hue variation applied to each particle."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's hue will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Hue variation randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Initial velocity magnitude for each particle. Direction comes from [member "
-"spread] and the node's orientation."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Initial velocity randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid "The amount of time each particle will exist (in seconds)."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Particle lifetime randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Linear acceleration applied to each particle in the direction of motion."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's linear acceleration will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Linear acceleration randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid ""
-"If [code]true[/code], particles use the parent node's coordinate space. If "
-"[code]false[/code], they use global coordinates."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"The [Mesh] used for each particle. If [code]null[/code], particles will be "
-"spheres."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles2D.xml
-msgid ""
-"If [code]true[/code], only one emission cycle occurs. If set [code]true[/"
-"code] during a cycle, emission will stop at the cycle's end."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"Orbital velocity applied to each particle. Makes the particles circle around "
-"origin in the local XY plane. Specified in number of full rotations around "
-"origin per second.\n"
-"This property is only available when [member flag_disable_z] is [code]true[/"
-"code]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's orbital velocity will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Orbital velocity randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles2D.xml
-msgid "Particle system starts as if it had already run for this many seconds."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Radial acceleration applied to each particle. Makes particle accelerate away "
-"from origin."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's radial acceleration will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Radial acceleration randomness ratio."
-msgstr "Radialbeschleunigungs-Zufallsverhältnis."
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles2D.xml
-msgid "Emission lifetime randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Initial scale applied to each particle."
-msgstr "Auf jedes Partikel angewendete Anfangsskalierung."
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's scale will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Scale randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles2D.xml
-msgid ""
-"Particle system's running speed scaling ratio. A value of [code]0[/code] can "
-"be used to pause the particles."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid ""
-"Each particle's initial direction range from [code]+spread[/code] to [code]-"
-"spread[/code] degrees. Applied to X/Z plane and Y/Z planes."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Tangential acceleration applied to each particle. Tangential acceleration is "
-"perpendicular to the particle's velocity giving the particles a swirling "
-"motion."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Each particle's tangential acceleration will vary along this [Curve]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Tangential acceleration randomness ratio."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid "Particles are drawn in the order emitted."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid "Particles are drawn in order of remaining lifetime."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/Particles.xml
-msgid "Particles are drawn in order of depth."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set initial velocity properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set angular velocity properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set orbital velocity properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set linear acceleration properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set radial acceleration properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set tangential acceleration properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set damping properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set angle properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set scale properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set hue variation properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set animation speed properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_curve] to set animation offset properties."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Represents the size of the [enum Parameter] enum."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid "Use with [method set_particle_flag] to set [member flag_align_y]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid "Use with [method set_particle_flag] to set [member flag_rotate_y]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml
-msgid "Use with [method set_particle_flag] to set [member flag_disable_z]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/GeometryInstance.xml doc/classes/ParticlesMaterial.xml
-#: doc/classes/SpatialMaterial.xml
-msgid "Represents the size of the [enum Flags] enum."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "All particles will be emitted from a single point."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
-msgid "Particles will be emitted in the volume of a sphere."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
-msgid "Particles will be emitted in the volume of a box."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Particles will be emitted at a position chosen randomly among [member "
-"emission_points]. Particle color will be modulated by [member "
-"emission_colors]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-msgid ""
-"Particles will be emitted at a position chosen randomly among [member "
-"emission_points]. Particle velocity and rotation will be set based on "
-"[member emission_normals]. Particle color will be modulated by [member "
-"emission_colors]."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/ParticlesMaterial.xml
-msgid "Particles will be emitted in a ring or cylinder."
-msgstr ""
-
-#: doc/classes/CPUParticles.xml doc/classes/CPUParticles2D.xml
-#: doc/classes/ParticlesMaterial.xml
-msgid "Represents the size of the [enum EmissionShape] enum."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid "CPU-based 2D particle emitter."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"CPU-based 2D particle node used to create a variety of particle systems and "
-"effects.\n"
-"See also [Particles2D], which provides the same functionality with hardware "
-"acceleration, but may not run on older devices.\n"
-"[b]Note:[/b] Unlike [Particles2D], the visibility rect is generated on-the-"
-"fly and doesn't need to be configured by the user."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"Sets this node's properties to match a given [Particles2D] node with an "
-"assigned [ParticlesMaterial]."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"Each particle's initial color. If [member texture] is defined, it will be "
-"multiplied by this color."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"Each particle's color will vary along this [Gradient] (multiplied with "
-"[member color])."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"The rectangle's extents if [member emission_shape] is set to [constant "
-"EMISSION_SHAPE_RECTANGLE]."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"The sphere's radius if [member emission_shape] is set to [constant "
-"EMISSION_SHAPE_SPHERE]."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml doc/classes/Particles.xml
-#: doc/classes/Particles2D.xml
-msgid ""
-"The particle system's frame rate is fixed to a value. For instance, changing "
-"the value to 2 will make the particles render at 2 frames per second. Note "
-"this does not slow down the simulation of the particle system itself."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml doc/classes/Particles2D.xml
-msgid ""
-"Normal map to be used for the [member texture] property.\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y-, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"Orbital velocity applied to each particle. Makes the particles circle around "
-"origin. Specified in number of full rotations around origin per second."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's initial direction range from [code]+spread[/code] to [code]-"
-"spread[/code] degrees."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml doc/classes/Particles2D.xml
-msgid "Particle texture. If [code]null[/code], particles will be squares."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid "Present for consistency with 3D particle nodes, not used in 2D."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid ""
-"Particles will be emitted on the surface of a sphere flattened to two "
-"dimensions."
-msgstr ""
-
-#: doc/classes/CPUParticles2D.xml
-msgid "Particles will be emitted in the area of a rectangle."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid "Access to advanced cryptographic functionalities."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"The Crypto class allows you to access some more advanced cryptographic "
-"functionalities in Godot.\n"
-"For now, this includes generating cryptographically secure random bytes, RSA "
-"keys and self-signed X509 certificates generation, asymmetric key encryption/"
-"decryption, and signing/verification.\n"
-"[codeblock]\n"
-"extends Node\n"
-"\n"
-"var crypto = Crypto.new()\n"
-"var key = CryptoKey.new()\n"
-"var cert = X509Certificate.new()\n"
-"\n"
-"func _ready():\n"
-"    # Generate new RSA key.\n"
-"    key = crypto.generate_rsa(4096)\n"
-"    # Generate new self-signed certificate with the given key.\n"
-"    cert = crypto.generate_self_signed_certificate(key, \"CN=mydomain.com,"
-"O=My Game Company,C=IT\")\n"
-"    # Save key and certificate in the user folder.\n"
-"    key.save(\"user://generated.key\")\n"
-"    cert.save(\"user://generated.crt\")\n"
-"    # Encryption\n"
-"    var data = \"Some data\"\n"
-"    var encrypted = crypto.encrypt(key, data.to_utf8())\n"
-"    # Decryption\n"
-"    var decrypted = crypto.decrypt(key, encrypted)\n"
-"    # Signing\n"
-"    var signature = crypto.sign(HashingContext.HASH_SHA256, data."
-"sha256_buffer(), key)\n"
-"    # Verifying\n"
-"    var verified = crypto.verify(HashingContext.HASH_SHA256, data."
-"sha256_buffer(), signature, key)\n"
-"    # Checks\n"
-"    assert(verified)\n"
-"    assert(data.to_utf8() == decrypted)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Not available in HTML5 exports."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Compares two [PoolByteArray]s for equality without leaking timing "
-"information in order to prevent timing attacks.\n"
-"See [url=https://paragonie.com/blog/2015/11/preventing-timing-attacks-on-"
-"string-comparison-with-double-hmac-strategy]this blog post[/url] for more "
-"information."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Decrypt the given [code]ciphertext[/code] with the provided private "
-"[code]key[/code].\n"
-"[b]Note:[/b] The maximum size of accepted ciphertext is limited by the key "
-"size."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Encrypt the given [code]plaintext[/code] with the provided public [code]key[/"
-"code].\n"
-"[b]Note:[/b] The maximum size of accepted plaintext is limited by the key "
-"size."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Generates a [PoolByteArray] of cryptographically secure random bytes with "
-"given [code]size[/code]."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Generates an RSA [CryptoKey] that can be used for creating self-signed "
-"certificates and passed to [method StreamPeerSSL.accept_stream]."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Generates a self-signed [X509Certificate] from the given [CryptoKey] and "
-"[code]issuer_name[/code]. The certificate validity will be defined by "
-"[code]not_before[/code] and [code]not_after[/code] (first valid date and "
-"last valid date). The [code]issuer_name[/code] must contain at least "
-"\"CN=\" (common name, i.e. the domain name), \"O=\" (organization, i.e. your "
-"company name), \"C=\" (country, i.e. 2 lettered ISO-3166 code of the country "
-"the organization is based in).\n"
-"A small example to generate an RSA key and a X509 self-signed certificate.\n"
-"[codeblock]\n"
-"var crypto = Crypto.new()\n"
-"# Generate 4096 bits RSA key.\n"
-"var key = crypto.generate_rsa(4096)\n"
-"# Generate self-signed certificate using the given key.\n"
-"var cert = crypto.generate_self_signed_certificate(key, \"CN=example.com,O=A "
-"Game Company,C=IT\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Generates an [url=https://en.wikipedia.org/wiki/HMAC]HMAC[/url] digest of "
-"[code]msg[/code] using [code]key[/code]. The [code]hash_type[/code] "
-"parameter is the hashing algorithm that is used for the inner and outer "
-"hashes.\n"
-"Currently, only [constant HashingContext.HASH_SHA256] and [constant "
-"HashingContext.HASH_SHA1] are supported."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Sign a given [code]hash[/code] of type [code]hash_type[/code] with the "
-"provided private [code]key[/code]."
-msgstr ""
-
-#: doc/classes/Crypto.xml
-msgid ""
-"Verify that a given [code]signature[/code] for [code]hash[/code] of type "
-"[code]hash_type[/code] against the provided public [code]key[/code]."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid "A cryptographic key (RSA)."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid ""
-"The CryptoKey class represents a cryptographic key. Keys can be loaded and "
-"saved like any other [Resource].\n"
-"They can be used to generate a self-signed [X509Certificate] via [method "
-"Crypto.generate_self_signed_certificate] and as private key in [method "
-"StreamPeerSSL.accept_stream] along with the appropriate certificate."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid ""
-"Return [code]true[/code] if this CryptoKey only has the public part, and not "
-"the private one."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid ""
-"Loads a key from [code]path[/code]. If [code]public_only[/code] is "
-"[code]true[/code], only the public key will be loaded.\n"
-"[b]Note:[/b] [code]path[/code] should be a \"*.pub\" file if "
-"[code]public_only[/code] is [code]true[/code], a \"*.key\" file otherwise."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid ""
-"Loads a key from the given [code]string[/code]. If [code]public_only[/code] "
-"is [code]true[/code], only the public key will be loaded."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid ""
-"Saves a key to the given [code]path[/code]. If [code]public_only[/code] is "
-"[code]true[/code], only the public key will be saved.\n"
-"[b]Note:[/b] [code]path[/code] should be a \"*.pub\" file if "
-"[code]public_only[/code] is [code]true[/code], a \"*.key\" file otherwise."
-msgstr ""
-
-#: doc/classes/CryptoKey.xml
-msgid ""
-"Returns a string containing the key in PEM format. If [code]public_only[/"
-"code] is [code]true[/code], only the public key will be included."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml
-msgid "A CSG Box shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml
-msgid ""
-"This node allows you to create a box for use with the CSG system.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml modules/csg/doc_classes/CSGCombiner.xml
-#: modules/csg/doc_classes/CSGCylinder.xml modules/csg/doc_classes/CSGMesh.xml
-#: modules/csg/doc_classes/CSGPolygon.xml
-#: modules/csg/doc_classes/CSGPrimitive.xml
-#: modules/csg/doc_classes/CSGShape.xml modules/csg/doc_classes/CSGSphere.xml
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "Prototyping levels with CSG"
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml
-msgid "Depth of the box measured from the center of the box."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml
-msgid "Height of the box measured from the center of the box."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml
-msgid "The material used to render the box."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGBox.xml
-msgid "Width of the box measured from the center of the box."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCombiner.xml
-msgid "A CSG node that allows you to combine other CSG modifiers."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCombiner.xml
-msgid ""
-"For complex arrangements of shapes, it is sometimes needed to add structure "
-"to your CSG nodes. The CSGCombiner node allows you to create this structure. "
-"The node encapsulates the result of the CSG operations of its children. In "
-"this way, it is possible to do operations on one set of shapes that are "
-"children of one CSGCombiner node, and a set of separate operations on a "
-"second set of shapes that are children of a second CSGCombiner node, and "
-"then do an operation that takes the two end results as its input to create "
-"the final shape.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid "A CSG Cylinder shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid ""
-"This node allows you to create a cylinder (or cone) for use with the CSG "
-"system.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid ""
-"If [code]true[/code] a cone is created, the [member radius] will only apply "
-"to one side."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid "The height of the cylinder."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid "The material used to render the cylinder."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid "The radius of the cylinder."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid ""
-"The number of sides of the cylinder, the higher this number the more detail "
-"there will be in the cylinder."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGCylinder.xml
-msgid ""
-"If [code]true[/code] the normals of the cylinder are set to give a smooth "
-"effect making the cylinder seem rounded. If [code]false[/code] the cylinder "
-"will have a flat shaded look."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGMesh.xml
-msgid "A CSG Mesh shape that uses a mesh resource."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGMesh.xml
-msgid ""
-"This CSG node allows you to use any mesh resource as a CSG shape, provided "
-"it is closed, does not self-intersect, does not contain internal faces and "
-"has no edges that connect to more than two faces. See also [CSGPolygon] for "
-"drawing 2D extruded polygons to be used as CSG nodes.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGMesh.xml
-msgid "The [Material] used in drawing the CSG shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGMesh.xml
-msgid ""
-"The [Mesh] resource to use as a CSG shape.\n"
-"[b]Note:[/b] When using an [ArrayMesh], avoid meshes with vertex normals "
-"unless a flat shader is required. By default, CSGMesh will ignore the mesh's "
-"vertex normals and use a smooth shader calculated using the faces' normals. "
-"If a flat shader is required, ensure that all faces' vertex normals are "
-"parallel."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid "Extrudes a 2D polygon shape to create a 3D mesh."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"An array of 2D points is extruded to quickly and easily create a variety of "
-"3D meshes. See also [CSGMesh] for using 3D meshes as CSG nodes.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_DEPTH], the depth of the extrusion."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"Material to use for the resulting mesh. The UV maps the top half of the "
-"material to the extruded shape (U along the the length of the extrusions and "
-"V around the outline of the [member polygon]), the bottom-left quarter to "
-"the front end face, and the bottom-right quarter to the back end face."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid "The [member mode] used to extrude the [member polygon]."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], by default, the top half of the "
-"[member material] is stretched along the entire length of the extruded "
-"shape. If [code]false[/code] the top half of the material is repeated every "
-"step of the extrusion."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], the path interval or ratio of "
-"path points to extrusions."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], this will determine if the "
-"interval should be by distance ([constant PATH_INTERVAL_DISTANCE]) or "
-"subdivision fractions ([constant PATH_INTERVAL_SUBDIVIDE])."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], if [code]true[/code] the ends of "
-"the path are joined, by adding an extrusion between the last and first "
-"points of the path."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], if [code]true[/code] the "
-"[Transform] of the [CSGPolygon] is used as the starting point for the "
-"extrusions, not the [Transform] of the [member path_node]."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], the location of the [Path] "
-"object used to extrude the [member polygon]."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], the [enum PathRotation] method "
-"used to rotate the [member polygon] as it is extruded."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], extrusions that are less than "
-"this angle, will be merged together to reduce polygon count."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_PATH], this is the distance along the "
-"path, in meters, the texture coordinates will tile. When set to 0, texture "
-"coordinates will match geometry exactly with no tiling."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"The point array that defines the 2D polygon that is extruded. This can be a "
-"convex or concave polygon with 3 or more points. The polygon must [i]not[/i] "
-"have any intersecting edges. Otherwise, triangulation will fail and no mesh "
-"will be generated.\n"
-"[b]Note:[/b] If only 1 or 2 points are defined in [member polygon], no mesh "
-"will be generated."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-#, fuzzy
-msgid "If [code]true[/code], applies smooth shading to the extrusions."
-msgstr ""
-"Wenn [code]true[/code], ist das einklappen für dieses TreeItem deaktiviert."
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_SPIN], the total number of degrees the "
-"[member polygon] is rotated when extruding."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is [constant MODE_SPIN], the number of extrusions made."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid "The [member polygon] shape is extruded along the negative Z axis."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"The [member polygon] shape is extruded by rotating it around the Y axis."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"The [member polygon] shape is extruded along the [Path] specified in [member "
-"path_node]."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"The [member polygon] shape is not rotated.\n"
-"[b]Note:[/b] Requires the path's Z coordinates to continually decrease to "
-"ensure viable shapes."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"The [member polygon] shape is rotated along the path, but it is not rotated "
-"around the path axis.\n"
-"[b]Note:[/b] Requires the path's Z coordinates to continually decrease to "
-"ensure viable shapes."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"The [member polygon] shape follows the path and its rotations around the "
-"path axis."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is set to [constant MODE_PATH], [member path_interval] "
-"will determine the distance, in meters, each interval of the path will "
-"extrude."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPolygon.xml
-msgid ""
-"When [member mode] is set to [constant MODE_PATH], [member path_interval] "
-"will subdivide the polygons along the path."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPrimitive.xml
-msgid "Base class for CSG primitives."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPrimitive.xml
-msgid ""
-"Parent class for various CSG primitives. It contains code and functionality "
-"that is common between them. It cannot be used directly. Instead use one of "
-"the various classes that inherit from it.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGPrimitive.xml
-msgid "Invert the faces of the mesh."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid "The CSG base class."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"This is the CSG base class that provides CSG operation support to the "
-"various CSG nodes in Godot.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml doc/classes/RayCast2D.xml
-#: doc/classes/SoftBody.xml
-msgid "Returns an individual bit on the collision mask."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"Returns an [Array] with two elements, the first is the [Transform] of this "
-"node and the second is the root [Mesh] of this node. Only works when this "
-"node is the root shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"Returns [code]true[/code] if this is a root shape and is thus the object "
-"that is rendered."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml doc/classes/SoftBody.xml
-msgid ""
-"Sets individual bits on the layer mask. Use this if you only need to change "
-"one layer's value."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml doc/classes/SoftBody.xml
-msgid ""
-"Sets individual bits on the collision mask. Use this if you only need to "
-"change one layer's value."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"Calculate tangents for the CSG shape which allows the use of normal maps. "
-"This is only applied on the root shape, this setting is ignored on any child."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-#, fuzzy
-msgid ""
-"The physics layers this area is in.\n"
-"Collidable objects can exist in any of 32 different layers. These layers "
-"work like a tagging system, and are not visual. A collidable can use these "
-"layers to select with which objects it can collide, using the collision_mask "
-"property.\n"
-"A contact is detected if object A is in any of the layers that object B "
-"scans, or object B is in any layer scanned by object A. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"The physics layers this CSG shape scans for collisions. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"The operation that is performed on this shape. This is ignored for the first "
-"CSG child node as the operation is between this node and the previous child "
-"of this nodes parent."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"Snap makes the mesh snap to a given distance so that the faces of two meshes "
-"can be perfectly aligned. A lower value results in greater precision but may "
-"be harder to adjust."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"Adds a collision shape to the physics engine for our CSG shape. This will "
-"always act like a static body. Note that the collision shape is still active "
-"even if the CSG shape itself is hidden."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"Geometry of both primitives is merged, intersecting geometry is removed."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid "Only intersecting geometry remains, the rest is removed."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGShape.xml
-msgid ""
-"The second shape is subtracted from the first, leaving a dent with its shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid "A CSG Sphere shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid ""
-"This node allows you to create a sphere for use with the CSG system.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid "The material used to render the sphere."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid "Number of vertical slices for the sphere."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid "Radius of the sphere."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid "Number of horizontal slices for the sphere."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGSphere.xml
-msgid ""
-"If [code]true[/code] the normals of the sphere are set to give a smooth "
-"effect making the sphere seem rounded. If [code]false[/code] the sphere will "
-"have a flat shaded look."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "A CSG Torus shape."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid ""
-"This node allows you to create a torus for use with the CSG system.\n"
-"[b]Note:[/b] CSG nodes are intended to be used for level prototyping. "
-"Creating CSG nodes has a significant CPU cost compared to creating a "
-"[MeshInstance] with a [PrimitiveMesh]. Moving a CSG node within another CSG "
-"node also has a significant CPU cost, so it should be avoided during "
-"gameplay."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "The inner radius of the torus."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "The material used to render the torus."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "The outer radius of the torus."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "The number of edges each ring of the torus is constructed of."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid "The number of slices the torus is constructed of."
-msgstr ""
-
-#: modules/csg/doc_classes/CSGTorus.xml
-msgid ""
-"If [code]true[/code] the normals of the torus are set to give a smooth "
-"effect making the torus seem rounded. If [code]false[/code] the torus will "
-"have a flat shaded look."
-msgstr ""
-
-#: modules/mono/doc_classes/CSharpScript.xml
-msgid ""
-"A script implemented in the C# programming language (Mono-enabled builds "
-"only)."
-msgstr ""
-
-#: modules/mono/doc_classes/CSharpScript.xml
-msgid ""
-"This class represents a C# script. It is the C# equivalent of the [GDScript] "
-"class and is only available in Mono-enabled Godot builds.\n"
-"See also [GodotSharp]."
-msgstr ""
-
-#: modules/mono/doc_classes/CSharpScript.xml
-#: modules/gdnative/doc_classes/PluginScript.xml
-msgid "Returns a new instance of the script."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "A CubeMap is a 6-sided 3D texture."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid ""
-"A 6-sided 3D texture typically used for faking reflections. It can be used "
-"to make an object look as if it's reflecting its surroundings. This usually "
-"delivers much better performance than other reflection methods."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-#, fuzzy
-msgid "Returns the [CubeMap]'s height."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/CubeMap.xml
-msgid ""
-"Returns an [Image] for a side of the [CubeMap] using one of the [enum Side] "
-"constants."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-#, fuzzy
-msgid "Returns the [CubeMap]'s width."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/CubeMap.xml
-msgid ""
-"Sets an [Image] for a side of the [CubeMap] using one of the [enum Side] "
-"constants."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid ""
-"The render flags for the [CubeMap]. See the [enum Flags] constants for "
-"details."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid ""
-"The lossy storage quality of the [CubeMap] if the storage mode is set to "
-"[constant STORAGE_COMPRESS_LOSSY]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "The [CubeMap]'s storage mode. See [enum Storage] constants."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Store the [CubeMap] without any compression."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Store the [CubeMap] with strong compression that reduces image quality."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid ""
-"Store the [CubeMap] with moderate compression that doesn't reduce image "
-"quality."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Identifier for the left face of the [CubeMap]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Identifier for the right face of the [CubeMap]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Identifier for the bottom face of the [CubeMap]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Identifier for the top face of the [CubeMap]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Identifier for the front face of the [CubeMap]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Identifier for the back face of the [CubeMap]."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Generate mipmaps, to enable smooth zooming out of the texture."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Repeat (instead of clamp to edge)."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Turn on magnifying filter, to enable smooth zooming in of the texture."
-msgstr ""
-
-#: doc/classes/CubeMap.xml
-msgid "Default flags. Generate mipmaps, repeat, and filter are enabled."
-msgstr ""
-
-#: doc/classes/CubeMesh.xml
-msgid "Generate an axis-aligned cuboid [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/CubeMesh.xml
-msgid ""
-"Generate an axis-aligned cuboid [PrimitiveMesh].\n"
-"The cube's UV layout is arranged in a 3×2 layout that allows texturing each "
-"face individually. To apply the same texture on all faces, change the "
-"material's UV property to [code]Vector3(3, 2, 1)[/code].\n"
-"[b]Note:[/b] When using a large textured [CubeMesh] (e.g. as a floor), you "
-"may stumble upon UV jittering issues depending on the camera angle. To solve "
-"this, increase [member subdivide_depth], [member subdivide_height] and "
-"[member subdivide_width] until you no longer notice UV jittering."
-msgstr ""
-
-#: doc/classes/CubeMesh.xml
-msgid "Size of the cuboid mesh."
-msgstr ""
-
-#: doc/classes/CubeMesh.xml
-msgid "Number of extra edge loops inserted along the Z axis."
-msgstr ""
-
-#: doc/classes/CubeMesh.xml
-msgid "Number of extra edge loops inserted along the Y axis."
-msgstr ""
-
-#: doc/classes/CubeMesh.xml
-msgid "Number of extra edge loops inserted along the X axis."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid "Parent of all nodes that can be culled by the Portal system."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"Provides common functionality to nodes that can be culled by the [Portal] "
-"system.\n"
-"[code]Static[/code] and [code]Dynamic[/code] objects are the most "
-"efficiently managed objects in the system, but there are some caveats. They "
-"are expected to be present initially when [Room]s are converted using the "
-"[RoomManager] [code]rooms_convert[/code] function, and their lifetime should "
-"be the same as the game level (i.e. present until you call "
-"[code]rooms_clear[/code] on the [RoomManager]. Although you shouldn't "
-"create / delete these objects during gameplay, you can manage their "
-"visibility with the standard [code]hide[/code] and [code]show[/code] "
-"commands.\n"
-"[code]Roaming[/code] objects on the other hand, require extra processing to "
-"keep track of which [Room] they are within. This enables them to be culled "
-"effectively, wherever they are.\n"
-"[code]Global[/code] objects are not culled by the portal system, and use "
-"view frustum culling only.\n"
-"Objects that are not [code]Static[/code] or [code]Dynamic[/code] can be "
-"freely created and deleted during the lifetime of the game level."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"This allows fine control over the mesh merging feature in the "
-"[RoomManager].\n"
-"Setting this option to [code]false[/code] can be used to prevent an instance "
-"being merged."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"When set to [code]0[/code], [CullInstance]s will be autoplaced in the [Room] "
-"with the highest priority.\n"
-"When set to a value other than [code]0[/code], the system will attempt to "
-"autoplace in a [Room] with the [code]autoplace_priority[/code], if it is "
-"present.\n"
-"This can be used to control autoplacement of building exteriors in an outer "
-"[RoomGroup]."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"When a manual bound has not been explicitly specified for a [Room], the "
-"convex hull bound will be estimated from the geometry of the objects within "
-"the room. This setting determines whether the geometry of an object is "
-"included in this estimate of the room bound.\n"
-"[b]Note:[/b] This setting is only relevant when the object is set to "
-"[code]PORTAL_MODE_STATIC[/code] or [code]PORTAL_MODE_DYNAMIC[/code], and for "
-"[Portal]s."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"When using [Room]s and [Portal]s, this specifies how the [CullInstance] is "
-"processed in the system."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"Use for instances within [Room]s that will [b]not move[/b] - e.g. walls, "
-"floors.\n"
-"[b]Note:[/b] If you attempt to delete a [code]PORTAL_MODE_STATIC[/code] "
-"instance while the room graph is loaded (converted), it will unload the room "
-"graph and deactivate portal culling. This is because the [b]room graph[/b] "
-"data has been invalidated. You will need to reconvert the rooms using the "
-"[RoomManager] to activate the system again."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"Use for instances within rooms that will move but [b]not change room[/b] - e."
-"g. moving platforms.\n"
-"[b]Note:[/b] If you attempt to delete a [code]PORTAL_MODE_DYNAMIC[/code] "
-"instance while the room graph is loaded (converted), it will unload the room "
-"graph and deactivate portal culling. This is because the [b]room graph[/b] "
-"data has been invalidated. You will need to reconvert the rooms using the "
-"[RoomManager] to activate the system again."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid "Use for instances that will move [b]between[/b] [Room]s - e.g. players."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"Use for instances that will be frustum culled only - e.g. first person "
-"weapon, debug."
-msgstr ""
-
-#: doc/classes/CullInstance.xml
-msgid ""
-"Use for instances that will not be shown at all - e.g. [b]manual room "
-"bounds[/b] (specified by prefix [i]'Bound_'[/i])."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "A mathematic curve."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"A curve that can be saved and re-used for other objects. By default, it "
-"ranges between [code]0[/code] and [code]1[/code] on the Y axis and positions "
-"points relative to the [code]0.5[/code] Y position.\n"
-"See also [Gradient] which is designed for color interpolation. See also "
-"[Curve2D] and [Curve3D]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Adds a point to the curve. For each side, if the [code]*_mode[/code] is "
-"[constant TANGENT_LINEAR], the [code]*_tangent[/code] angle (in degrees) "
-"uses the slope of the curve halfway to the adjacent point. Allows custom "
-"assignments to the [code]*_tangent[/code] angle if [code]*_mode[/code] is "
-"set to [constant TANGENT_FREE]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "Recomputes the baked cache of points for the curve."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Removes points that are closer than [code]CMP_EPSILON[/code] (0.00001) units "
-"to their neighbor on the curve."
-msgstr ""
-
-#: doc/classes/Curve.xml doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid "Removes all points from the curve."
-msgstr ""
-
-#: doc/classes/Curve.xml doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid "Returns the number of points describing the curve."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Returns the left [enum TangentMode] for the point at [code]index[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Returns the left tangent angle (in degrees) for the point at [code]index[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "Returns the curve coordinates for the point at [code]index[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Returns the right [enum TangentMode] for the point at [code]index[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Returns the right tangent angle (in degrees) for the point at [code]index[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Returns the Y value for the point that would exist at the X position "
-"[code]offset[/code] along the curve."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Returns the Y value for the point that would exist at the X position "
-"[code]offset[/code] along the curve using the baked cache. Bakes the curve's "
-"points if not already baked."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "Removes the point at [code]index[/code] from the curve."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Sets the left [enum TangentMode] for the point at [code]index[/code] to "
-"[code]mode[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Sets the left tangent angle for the point at [code]index[/code] to "
-"[code]tangent[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "Sets the offset from [code]0.5[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Sets the right [enum TangentMode] for the point at [code]index[/code] to "
-"[code]mode[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Sets the right tangent angle for the point at [code]index[/code] to "
-"[code]tangent[/code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"Assigns the vertical position [code]y[/code] to the point at [code]index[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "The number of points to include in the baked (i.e. cached) curve data."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "The maximum value the curve can reach."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "The minimum value the curve can reach."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "Emitted when [member max_value] or [member min_value] is changed."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "The tangent on this side of the point is user-defined."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid ""
-"The curve calculates the tangent on this side of the point as the slope "
-"halfway towards the adjacent point."
-msgstr ""
-
-#: doc/classes/Curve.xml
-msgid "The total number of available tangent modes."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid "Describes a Bézier curve in 2D space."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"This class describes a Bézier curve in 2D space. It is mainly used to give a "
-"shape to a [Path2D], but can be manually sampled for other purposes.\n"
-"It keeps a cache of precalculated points along the curve, to speed up "
-"further calculations."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Adds a point with the specified [code]position[/code] relative to the "
-"curve's own position, with control points [code]in[/code] and [code]out[/"
-"code]. Appends the new point at the end of the point list.\n"
-"If [code]index[/code] is given, the new point is inserted before the "
-"existing point identified by index [code]index[/code]. Every existing point "
-"starting from [code]index[/code] is shifted further down the list of points. "
-"The index must be greater than or equal to [code]0[/code] and must not "
-"exceed the number of existing points in the line. See [method "
-"get_point_count]."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Returns the total length of the curve, based on the cached points. Given "
-"enough density (see [member bake_interval]), it should be approximate enough."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-#, fuzzy
-msgid "Returns the cache of points as a [PoolVector2Array]."
-msgstr "Liefert die Fläche des [Rect2i]."
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"Returns the closest offset to [code]to_point[/code]. This offset is meant to "
-"be used in [method interpolate_baked].\n"
-"[code]to_point[/code] must be in this curve's local space."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Returns the closest baked point (in curve's local space) to [code]to_point[/"
-"code].\n"
-"[code]to_point[/code] must be in this curve's local space."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"Returns the position of the control point leading to the vertex [code]idx[/"
-"code]. The returned position is relative to the vertex [code]idx[/code]. If "
-"the index is out of bounds, the function sends an error to the console, and "
-"returns [code](0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"Returns the position of the control point leading out of the vertex "
-"[code]idx[/code]. The returned position is relative to the vertex [code]idx[/"
-"code]. If the index is out of bounds, the function sends an error to the "
-"console, and returns [code](0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"Returns the position of the vertex [code]idx[/code]. If the index is out of "
-"bounds, the function sends an error to the console, and returns [code](0, 0)"
-"[/code]."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"Returns the position between the vertex [code]idx[/code] and the vertex "
-"[code]idx + 1[/code], where [code]t[/code] controls if the point is the "
-"first vertex ([code]t = 0.0[/code]), the last vertex ([code]t = 1.0[/code]), "
-"or in between. Values of [code]t[/code] outside the range ([code]0.0 >= t "
-"<=1[/code]) give strange, but predictable results.\n"
-"If [code]idx[/code] is out of bounds it is truncated to the first or last "
-"vertex, and [code]t[/code] is ignored. If the curve has no points, the "
-"function sends an error to the console, and returns [code](0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"Returns a point within the curve at position [code]offset[/code], where "
-"[code]offset[/code] is measured as a pixel distance along the curve.\n"
-"To do that, it finds the two cached points where the [code]offset[/code] "
-"lies between, then interpolates the values. This interpolation is cubic if "
-"[code]cubic[/code] is set to [code]true[/code], or linear if set to "
-"[code]false[/code].\n"
-"Cubic interpolation tends to follow the curves better, but linear is faster "
-"(and often, precise enough)."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Returns the position at the vertex [code]fofs[/code]. It calls [method "
-"interpolate] using the integer part of [code]fofs[/code] as [code]idx[/"
-"code], and its fractional part as [code]t[/code]."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Deletes the point [code]idx[/code] from the curve. Sends an error to the "
-"console if [code]idx[/code] is out of bounds."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Sets the position of the control point leading to the vertex [code]idx[/"
-"code]. If the index is out of bounds, the function sends an error to the "
-"console. The position is relative to the vertex."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Sets the position of the control point leading out of the vertex [code]idx[/"
-"code]. If the index is out of bounds, the function sends an error to the "
-"console. The position is relative to the vertex."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Sets the position for the vertex [code]idx[/code]. If the index is out of "
-"bounds, the function sends an error to the console."
-msgstr ""
-
-#: doc/classes/Curve2D.xml doc/classes/Curve3D.xml
-msgid ""
-"Returns a list of points along the curve, with a curvature controlled point "
-"density. That is, the curvier parts will have more points than the "
-"straighter parts.\n"
-"This approximation makes straight segments between each point, then "
-"subdivides those segments until the resulting shape is similar enough.\n"
-"[code]max_stages[/code] controls how many subdivisions a curve segment may "
-"face before it is considered approximate enough. Each subdivision splits the "
-"segment in half, so the default 5 stages may mean up to 32 subdivisions per "
-"curve segment. Increase with care!\n"
-"[code]tolerance_degrees[/code] controls how many degrees the midpoint of a "
-"segment may deviate from the real curve, before the segment has to be "
-"subdivided."
-msgstr ""
-
-#: doc/classes/Curve2D.xml
-msgid ""
-"The distance in pixels between two adjacent cached points. Changing it "
-"forces the cache to be recomputed the next time the [method "
-"get_baked_points] or [method get_baked_length] function is called. The "
-"smaller the distance, the more points in the cache and the more memory it "
-"will consume, so use with care."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid "Describes a Bézier curve in 3D space."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"This class describes a Bézier curve in 3D space. It is mainly used to give a "
-"shape to a [Path], but can be manually sampled for other purposes.\n"
-"It keeps a cache of precalculated points along the curve, to speed up "
-"further calculations."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-#, fuzzy
-msgid "Returns the cache of points as a [PoolVector3Array]."
-msgstr "Liefert die Fläche des [Rect2i]."
-
-#: doc/classes/Curve3D.xml
-#, fuzzy
-msgid "Returns the cache of tilts as a [PoolRealArray]."
-msgstr "Gibt die Größe des Arrays zurück."
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the cache of up vectors as a [PoolVector3Array].\n"
-"If [member up_vector_enabled] is [code]false[/code], the cache will be empty."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the closest offset to [code]to_point[/code]. This offset is meant to "
-"be used in [method interpolate_baked] or [method "
-"interpolate_baked_up_vector].\n"
-"[code]to_point[/code] must be in this curve's local space."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the position of the control point leading to the vertex [code]idx[/"
-"code]. The returned position is relative to the vertex [code]idx[/code]. If "
-"the index is out of bounds, the function sends an error to the console, and "
-"returns [code](0, 0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the position of the control point leading out of the vertex "
-"[code]idx[/code]. The returned position is relative to the vertex [code]idx[/"
-"code]. If the index is out of bounds, the function sends an error to the "
-"console, and returns [code](0, 0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the position of the vertex [code]idx[/code]. If the index is out of "
-"bounds, the function sends an error to the console, and returns [code](0, 0, "
-"0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the tilt angle in radians for the point [code]idx[/code]. If the "
-"index is out of bounds, the function sends an error to the console, and "
-"returns [code]0[/code]."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns the position between the vertex [code]idx[/code] and the vertex "
-"[code]idx + 1[/code], where [code]t[/code] controls if the point is the "
-"first vertex ([code]t = 0.0[/code]), the last vertex ([code]t = 1.0[/code]), "
-"or in between. Values of [code]t[/code] outside the range ([code]0.0 >= t "
-"<=1[/code]) give strange, but predictable results.\n"
-"If [code]idx[/code] is out of bounds it is truncated to the first or last "
-"vertex, and [code]t[/code] is ignored. If the curve has no points, the "
-"function sends an error to the console, and returns [code](0, 0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns a point within the curve at position [code]offset[/code], where "
-"[code]offset[/code] is measured as a distance in 3D units along the curve.\n"
-"To do that, it finds the two cached points where the [code]offset[/code] "
-"lies between, then interpolates the values. This interpolation is cubic if "
-"[code]cubic[/code] is set to [code]true[/code], or linear if set to "
-"[code]false[/code].\n"
-"Cubic interpolation tends to follow the curves better, but linear is faster "
-"(and often, precise enough)."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Returns an up vector within the curve at position [code]offset[/code], where "
-"[code]offset[/code] is measured as a distance in 3D units along the curve.\n"
-"To do that, it finds the two cached up vectors where the [code]offset[/code] "
-"lies between, then interpolates the values. If [code]apply_tilt[/code] is "
-"[code]true[/code], an interpolated tilt is applied to the interpolated up "
-"vector.\n"
-"If the curve has no up vectors, the function sends an error to the console, "
-"and returns [code](0, 1, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"Sets the tilt angle in radians for the point [code]idx[/code]. If the index "
-"is out of bounds, the function sends an error to the console.\n"
-"The tilt controls the rotation along the look-at axis an object traveling "
-"the path would have. In the case of a curve controlling a [PathFollow], this "
-"tilt is an offset over the natural tilt the [PathFollow] calculates."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"The distance in meters between two adjacent cached points. Changing it "
-"forces the cache to be recomputed the next time the [method "
-"get_baked_points] or [method get_baked_length] function is called. The "
-"smaller the distance, the more points in the cache and the more memory it "
-"will consume, so use with care."
-msgstr ""
-
-#: doc/classes/Curve3D.xml
-msgid ""
-"If [code]true[/code], the curve will bake up vectors used for orientation. "
-"This is used when [member PathFollow.rotation_mode] is set to [constant "
-"PathFollow.ROTATION_ORIENTED]. Changing it forces the cache to be recomputed."
-msgstr ""
-
-#: doc/classes/CurveTexture.xml
-msgid "A texture that shows a curve."
-msgstr ""
-
-#: doc/classes/CurveTexture.xml
-msgid ""
-"Renders a given [Curve] provided to it. Simplifies the task of drawing "
-"curves and/or saving them as image files."
-msgstr ""
-
-#: doc/classes/CurveTexture.xml
-#, fuzzy
-msgid "The [Curve] that is rendered onto the texture."
-msgstr "Der Name des Audiobusses des Bereichs."
-
-#: doc/classes/CurveTexture.xml
-msgid ""
-"The width of the texture (in pixels). Higher values make it possible to "
-"represent high-frequency data better (such as sudden direction changes), at "
-"the cost of increased generation time and memory usage."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid "Class representing a cylindrical [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid ""
-"Class representing a cylindrical [PrimitiveMesh]. This class can be used to "
-"create cones by setting either the [member top_radius] or [member "
-"bottom_radius] properties to [code]0.0[/code]."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid ""
-"Bottom radius of the cylinder. If set to [code]0.0[/code], the bottom faces "
-"will not be generated, resulting in a conic shape."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid "Full height of the cylinder."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid ""
-"Number of radial segments on the cylinder. Higher values result in a more "
-"detailed cylinder/cone at the cost of performance."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid ""
-"Number of edge rings along the height of the cylinder. Changing [member "
-"rings] does not have any visual impact unless a shader or procedural mesh "
-"tool is used to alter the vertex data. Higher values result in more "
-"subdivisions, which can be used to create smoother-looking effects with "
-"shaders or procedural mesh tools (at the cost of performance). When not "
-"altering the vertex data using a shader or procedural mesh tool, [member "
-"rings] should be kept to its default value."
-msgstr ""
-
-#: doc/classes/CylinderMesh.xml
-msgid ""
-"Top radius of the cylinder. If set to [code]0.0[/code], the top faces will "
-"not be generated, resulting in a conic shape."
-msgstr ""
-
-#: doc/classes/CylinderShape.xml
-msgid "Cylinder shape for collisions."
-msgstr ""
-
-#: doc/classes/CylinderShape.xml
-msgid ""
-"Cylinder shape for collisions.\n"
-"[b]Note:[/b] When using GodotPhysics instead of the default Bullet physics "
-"engine, there are several known bugs with cylinder collision shapes. Using "
-"[CapsuleShape] or [BoxShape] instead is recommended."
-msgstr ""
-
-#: doc/classes/CylinderShape.xml
-msgid "The cylinder's height."
-msgstr ""
-
-#: doc/classes/CylinderShape.xml
-msgid "The cylinder's radius."
-msgstr ""
-
-#: doc/classes/DampedSpringJoint2D.xml
-msgid "Damped spring constraint for 2D physics."
-msgstr ""
-
-#: doc/classes/DampedSpringJoint2D.xml
-msgid ""
-"Damped spring constraint for 2D physics. This resembles a spring joint that "
-"always wants to go back to a given length."
-msgstr ""
-
-#: doc/classes/DampedSpringJoint2D.xml
-msgid ""
-"The spring joint's damping ratio. A value between [code]0[/code] and "
-"[code]1[/code]. When the two bodies move into different directions the "
-"system tries to align them to the spring axis again. A high [code]damping[/"
-"code] value forces the attached bodies to align faster."
-msgstr ""
-
-#: doc/classes/DampedSpringJoint2D.xml
-msgid ""
-"The spring joint's maximum length. The two attached bodies cannot stretch it "
-"past this value."
-msgstr ""
-
-#: doc/classes/DampedSpringJoint2D.xml
-msgid ""
-"When the bodies attached to the spring joint move they stretch or squash it. "
-"The joint always tries to resize towards this length."
-msgstr ""
-
-#: doc/classes/DampedSpringJoint2D.xml
-msgid ""
-"The higher the value, the less the bodies attached to the joint will deform "
-"it. The joint applies an opposing force to the bodies, the product of the "
-"stiffness multiplied by the size difference from its resting length."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid "Dictionary type."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Dictionary type. Associative container which contains values referenced by "
-"unique keys. Dictionaries are composed of pairs of keys (which must be "
-"unique) and values. Dictionaries will preserve the insertion order when "
-"adding elements, even though this may not be reflected when printing the "
-"dictionary. In other programming languages, this data structure is sometimes "
-"referred to as a hash map or associative array.\n"
-"You can define a dictionary by placing a comma-separated list of [code]key: "
-"value[/code] pairs in curly braces [code]{}[/code].\n"
-"Erasing elements while iterating over them [b]is not supported[/b] and will "
-"result in undefined behavior.\n"
-"[b]Note:[/b] Dictionaries are always passed by reference. To get a copy of a "
-"dictionary which can be modified independently of the original dictionary, "
-"use [method duplicate].\n"
-"Creating a dictionary:\n"
-"[codeblock]\n"
-"var my_dict = {} # Creates an empty dictionary.\n"
-"\n"
-"var dict_variable_key = \"Another key name\"\n"
-"var dict_variable_value = \"value2\"\n"
-"var another_dict = {\n"
-"    \"Some key name\": \"value1\",\n"
-"    dict_variable_key: dict_variable_value,\n"
-"}\n"
-"\n"
-"var points_dict = {\"White\": 50, \"Yellow\": 75, \"Orange\": 100}\n"
-"\n"
-"# Alternative Lua-style syntax.\n"
-"# Doesn't require quotes around keys, but only string constants can be used "
-"as key names.\n"
-"# Additionally, key names must start with a letter or an underscore.\n"
-"# Here, `some_key` is a string literal, not a variable!\n"
-"another_dict = {\n"
-"    some_key = 42,\n"
-"}\n"
-"[/codeblock]\n"
-"You can access a dictionary's values by referencing the appropriate key. In "
-"the above example, [code]points_dict[\"White\"][/code] will return [code]50[/"
-"code]. You can also write [code]points_dict.White[/code], which is "
-"equivalent. However, you'll have to use the bracket syntax if the key you're "
-"accessing the dictionary with isn't a fixed string (such as a number or "
-"variable).\n"
-"[codeblock]\n"
-"export(String, \"White\", \"Yellow\", \"Orange\") var my_color\n"
-"var points_dict = {\"White\": 50, \"Yellow\": 75, \"Orange\": 100}\n"
-"func _ready():\n"
-"    # We can't use dot syntax here as `my_color` is a variable.\n"
-"    var points = points_dict[my_color]\n"
-"[/codeblock]\n"
-"In the above code, [code]points[/code] will be assigned the value that is "
-"paired with the appropriate color selected in [code]my_color[/code].\n"
-"Dictionaries can contain more complex data:\n"
-"[codeblock]\n"
-"my_dict = {\"First Array\": [1, 2, 3, 4]} # Assigns an Array to a String "
-"key.\n"
-"[/codeblock]\n"
-"To add a key to an existing dictionary, access it like an existing key and "
-"assign to it:\n"
-"[codeblock]\n"
-"var points_dict = {\"White\": 50, \"Yellow\": 75, \"Orange\": 100}\n"
-"points_dict[\"Blue\"] = 150 # Add \"Blue\" as a key and assign 150 as its "
-"value.\n"
-"[/codeblock]\n"
-"Finally, dictionaries can contain different types of keys and values in the "
-"same dictionary:\n"
-"[codeblock]\n"
-"# This is a valid dictionary.\n"
-"# To access the string \"Nested value\" below, use `my_dict.sub_dict."
-"sub_key` or `my_dict[\"sub_dict\"][\"sub_key\"]`.\n"
-"# Indexing styles can be mixed and matched depending on your needs.\n"
-"var my_dict = {\n"
-"    \"String Key\": 5,\n"
-"    4: [1, 2, 3],\n"
-"    7: \"Hello\",\n"
-"    \"sub_dict\": {\"sub_key\": \"Nested value\"},\n"
-"}\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Unlike [Array]s, you can't compare dictionaries directly:\n"
-"[codeblock]\n"
-"array1 = [1, 2, 3]\n"
-"array2 = [1, 2, 3]\n"
-"\n"
-"func compare_arrays():\n"
-"    print(array1 == array2) # Will print true.\n"
-"\n"
-"var dict1 = {\"a\": 1, \"b\": 2, \"c\": 3}\n"
-"var dict2 = {\"a\": 1, \"b\": 2, \"c\": 3}\n"
-"\n"
-"func compare_dictionaries():\n"
-"    print(dict1 == dict2) # Will NOT print true.\n"
-"[/codeblock]\n"
-"You need to first calculate the dictionary's hash with [method hash] before "
-"you can compare them:\n"
-"[codeblock]\n"
-"var dict1 = {\"a\": 1, \"b\": 2, \"c\": 3}\n"
-"var dict2 = {\"a\": 1, \"b\": 2, \"c\": 3}\n"
-"\n"
-"func compare_dictionaries():\n"
-"    print(dict1.hash() == dict2.hash()) # Will print true.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] When declaring a dictionary with [code]const[/code], the "
-"dictionary itself can still be mutated by defining the values of individual "
-"keys. Using [code]const[/code] will only prevent assigning the constant with "
-"another value after it was initialized."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid "GDScript basics: Dictionary"
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid "Clear the dictionary, removing all key/value pairs."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Creates a copy of the dictionary, and returns it. The [code]deep[/code] "
-"parameter causes inner dictionaries and arrays to be copied recursively, but "
-"does not apply to objects."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid "Returns [code]true[/code] if the dictionary is empty."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Erase a dictionary key/value pair by key. Returns [code]true[/code] if the "
-"given key was present in the dictionary, [code]false[/code] otherwise.\n"
-"[b]Note:[/b] Don't erase elements while iterating over the dictionary. You "
-"can iterate over the [method keys] array instead."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Returns the current value for the specified key in the [Dictionary]. If the "
-"key does not exist, the method returns the value of the optional default "
-"argument, or [code]null[/code] if it is omitted."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Returns [code]true[/code] if the dictionary has a given key.\n"
-"[b]Note:[/b] This is equivalent to using the [code]in[/code] operator as "
-"follows:\n"
-"[codeblock]\n"
-"# Will evaluate to `true`.\n"
-"if \"godot\" in {\"godot\": \"engine\"}:\n"
-"    pass\n"
-"[/codeblock]\n"
-"This method (like the [code]in[/code] operator) will evaluate to [code]true[/"
-"code] as long as the key exists, even if the associated value is [code]null[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the dictionary has all the keys in the given "
-"array."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Graph das übergebene Node enthält."
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Returns a hashed 32-bit integer value representing the dictionary contents. "
-"This can be used to compare dictionaries by value:\n"
-"[codeblock]\n"
-"var dict1 = {0: 10}\n"
-"var dict2 = {0: 10}\n"
-"# The line below prints `true`, whereas it would have printed `false` if "
-"both variables were compared directly.\n"
-"print(dict1.hash() == dict2.hash())\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Dictionaries with the same keys/values but in a different order "
-"will have a different hash.\n"
-"[b]Note:[/b] Dictionaries with equal content will always produce identical "
-"hash values. However, the reverse is not true. Returning identical hash "
-"values does [i]not[/i] imply the dictionaries are equal, because different "
-"dictionaries can have identical hash values due to hash collisions."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid "Returns the list of keys in the [Dictionary]."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-msgid ""
-"Adds elements from [code]dictionary[/code] to this [Dictionary]. By default, "
-"duplicate keys will not be copied over, unless [code]overwrite[/code] is "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/Dictionary.xml
-#, fuzzy
-msgid "Returns the number of keys in the dictionary."
-msgstr "Gibt die Nummer von Elementen innerhalb eines Arrays wieder."
-
-#: doc/classes/Dictionary.xml
-msgid "Returns the list of values in the [Dictionary]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid "Directional light from a distance, as from the Sun."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"A directional light is a type of [Light] node that models an infinite number "
-"of parallel rays covering the entire scene. It is used for lights with "
-"strong intensity that are located far away from the scene to model sunlight "
-"or moonlight. The worldspace location of the DirectionalLight transform "
-"(origin) is ignored. Only the basis is used to determine light direction."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Amount of extra bias for shadow splits that are far away. If self-shadowing "
-"occurs only on the splits far away, increasing this value can fix them. This "
-"is ignored when [member directional_shadow_mode] is [constant "
-"SHADOW_ORTHOGONAL]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"If [code]true[/code], shadow detail is sacrificed in exchange for smoother "
-"transitions between splits. Enabling shadow blend splitting also has a "
-"moderate performance cost. This is ignored when [member "
-"directional_shadow_mode] is [constant SHADOW_ORTHOGONAL]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Optimizes shadow rendering for detail versus movement. See [enum "
-"ShadowDepthRange]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"The maximum distance for shadow splits. Increasing this value will make "
-"directional shadows visible from further away, at the cost of lower overall "
-"shadow detail and performance (since more objects need to be included in the "
-"directional shadow rendering)."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid "The light's shadow rendering algorithm. See [enum ShadowMode]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Can be used to fix special cases of self shadowing when objects are "
-"perpendicular to the light."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"The distance from camera to shadow split 1. Relative to [member "
-"directional_shadow_max_distance]. Only used when [member "
-"directional_shadow_mode] is [constant SHADOW_PARALLEL_2_SPLITS] or [constant "
-"SHADOW_PARALLEL_4_SPLITS]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"The distance from shadow split 1 to split 2. Relative to [member "
-"directional_shadow_max_distance]. Only used when [member "
-"directional_shadow_mode] is [constant SHADOW_PARALLEL_2_SPLITS] or [constant "
-"SHADOW_PARALLEL_4_SPLITS]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"The distance from shadow split 2 to split 3. Relative to [member "
-"directional_shadow_max_distance]. Only used when [member "
-"directional_shadow_mode] is [constant SHADOW_PARALLEL_4_SPLITS]."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Renders the entire scene's shadow map from an orthogonal point of view. This "
-"is the fastest directional shadow mode. May result in blurrier shadows on "
-"close objects."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Splits the view frustum in 2 areas, each with its own shadow map. This "
-"shadow mode is a compromise between [constant SHADOW_ORTHOGONAL] and "
-"[constant SHADOW_PARALLEL_4_SPLITS] in terms of performance."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Splits the view frustum in 4 areas, each with its own shadow map. This is "
-"the slowest directional shadow mode."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Keeps the shadow stable when the camera moves, at the cost of lower "
-"effective shadow resolution."
-msgstr ""
-
-#: doc/classes/DirectionalLight.xml
-msgid ""
-"Tries to achieve maximum shadow resolution. May result in saw effect on "
-"shadow edges. This mode typically works best in games where the camera will "
-"often move at high speeds, such as most racing games."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid "Type used to handle the filesystem."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Directory type. It is used to manage directories and their content (not "
-"restricted to the project folder).\n"
-"When creating a new [Directory], its default opened directory will be "
-"[code]res://[/code]. This may change in the future, so it is advised to "
-"always use [method open] to initialize your [Directory] where you want to "
-"operate, with explicit error checking.\n"
-"[b]Note:[/b] Many resources types are imported (e.g. textures or sound "
-"files), and their source asset will not be included in the exported game, as "
-"only the imported version is used. Use [ResourceLoader] to access imported "
-"resources.\n"
-"Here is an example on how to iterate through the files of a directory:\n"
-"[codeblock]\n"
-"func dir_contents(path):\n"
-"    var dir = Directory.new()\n"
-"    if dir.open(path) == OK:\n"
-"        dir.list_dir_begin()\n"
-"        var file_name = dir.get_next()\n"
-"        while file_name != \"\":\n"
-"            if dir.current_is_dir():\n"
-"                print(\"Found directory: \" + file_name)\n"
-"            else:\n"
-"                print(\"Found file: \" + file_name)\n"
-"            file_name = dir.get_next()\n"
-"    else:\n"
-"        print(\"An error occurred when trying to access the path.\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Changes the currently opened directory to the one passed as an argument. The "
-"argument can be relative to the current directory (e.g. [code]newdir[/code] "
-"or [code]../newdir[/code]), or an absolute path (e.g. [code]/tmp/newdir[/"
-"code] or [code]res://somedir/newdir[/code]).\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Copies the [code]from[/code] file to the [code]to[/code] destination. Both "
-"arguments should be paths to files, either relative or absolute. If the "
-"destination file exists and is not access-protected, it will be "
-"overwritten.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Returns whether the current item processed with the last [method get_next] "
-"call is a directory ([code].[/code] and [code]..[/code] are considered "
-"directories)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Returns whether the target directory exists. The argument can be relative to "
-"the current directory, or an absolute path."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Returns whether the target file exists. The argument can be relative to the "
-"current directory, or an absolute path."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Returns the absolute path to the currently opened directory (e.g. "
-"[code]res://folder[/code] or [code]C:\\tmp\\folder[/code])."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Returns the currently opened directory's drive index. See [method get_drive] "
-"to convert returned index to the name of the drive."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"On Windows, returns the name of the drive (partition) passed as an argument "
-"(e.g. [code]C:[/code]).\n"
-"On macOS, returns the path to the mounted volume passed as an argument.\n"
-"On Linux, returns the path to the mounted volume or GTK 3 bookmark passed as "
-"an argument.\n"
-"On other platforms, or if the requested drive does not exist, the method "
-"returns an empty String."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"On Windows, returns the number of drives (partitions) mounted on the current "
-"filesystem.\n"
-"On macOS, returns the number of mounted volumes.\n"
-"On Linux, returns the number of mounted volumes and GTK 3 bookmarks.\n"
-"On other platforms, the method returns 0."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Returns the next element (file or directory) in the current directory "
-"(including [code].[/code] and [code]..[/code], unless "
-"[code]skip_navigational[/code] was given to [method list_dir_begin]).\n"
-"The name of the file or directory is returned (and not its full path). Once "
-"the stream has been fully processed, the method returns an empty String and "
-"closes the stream automatically (i.e. [method list_dir_end] would not be "
-"mandatory in such a case)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"On UNIX desktop systems, returns the available space on the current "
-"directory's disk. On other platforms, this information is not available and "
-"the method returns 0 or -1."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Initializes the stream used to list all files and directories using the "
-"[method get_next] function, closing the currently opened stream if needed. "
-"Once the stream has been processed, it should typically be closed with "
-"[method list_dir_end].\n"
-"If [code]skip_navigational[/code] is [code]true[/code], [code].[/code] and "
-"[code]..[/code] are filtered out.\n"
-"If [code]skip_hidden[/code] is [code]true[/code], hidden files are filtered "
-"out."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Closes the current stream opened with [method list_dir_begin] (whether it "
-"has been fully processed with [method get_next] does not matter)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Creates a directory. The argument can be relative to the current directory, "
-"or an absolute path. The target directory should be placed in an already "
-"existing directory (to create the full path recursively, see [method "
-"make_dir_recursive]).\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Creates a target directory and all necessary intermediate directories in its "
-"path, by calling [method make_dir] recursively. The argument can be relative "
-"to the current directory, or an absolute path.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Opens an existing directory of the filesystem. The [code]path[/code] "
-"argument can be within the project tree ([code]res://folder[/code]), the "
-"user directory ([code]user://folder[/code]) or an absolute path of the user "
-"filesystem (e.g. [code]/tmp/folder[/code] or [code]C:\\tmp\\folder[/code]).\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Permanently deletes the target file or an empty directory. The argument can "
-"be relative to the current directory, or an absolute path. If the target "
-"directory is not empty, the operation will fail.\n"
-"If you don't want to delete the file/directory permanently, use [method OS."
-"move_to_trash] instead.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/Directory.xml
-msgid ""
-"Renames (move) the [code]from[/code] file or directory to the [code]to[/"
-"code] destination. Both arguments should be paths to files or directories, "
-"either relative or absolute. If the destination file or directory exists and "
-"is not access-protected, it will be overwritten.\n"
-"Returns one of the [enum Error] code constants ([code]OK[/code] on success)."
-msgstr ""
-
-#: doc/classes/DTLSServer.xml
-msgid "Helper class to implement a DTLS server."
-msgstr ""
-
-#: doc/classes/DTLSServer.xml
-msgid ""
-"This class is used to store the state of a DTLS server. Upon [method setup] "
-"it converts connected [PacketPeerUDP] to [PacketPeerDTLS] accepting them via "
-"[method take_connection] as DTLS clients. Under the hood, this class is used "
-"to store the DTLS state and cookies of the server. The reason of why the "
-"state and cookies are needed is outside of the scope of this documentation.\n"
-"Below a small example of how to use it:\n"
-"[codeblock]\n"
-"# server.gd\n"
-"extends Node\n"
-"\n"
-"var dtls := DTLSServer.new()\n"
-"var server := UDPServer.new()\n"
-"var peers = []\n"
-"\n"
-"func _ready():\n"
-"    server.listen(4242)\n"
-"    var key = load(\"key.key\") # Your private key.\n"
-"    var cert = load(\"cert.crt\") # Your X509 certificate.\n"
-"    dtls.setup(key, cert)\n"
-"\n"
-"func _process(delta):\n"
-"    while server.is_connection_available():\n"
-"        var peer : PacketPeerUDP = server.take_connection()\n"
-"        var dtls_peer : PacketPeerDTLS = dtls.take_connection(peer)\n"
-"        if dtls_peer.get_status() != PacketPeerDTLS.STATUS_HANDSHAKING:\n"
-"            continue # It is normal that 50% of the connections fails due to "
-"cookie exchange.\n"
-"        print(\"Peer connected!\")\n"
-"        peers.append(dtls_peer)\n"
-"    for p in peers:\n"
-"        p.poll() # Must poll to update the state.\n"
-"        if p.get_status() == PacketPeerDTLS.STATUS_CONNECTED:\n"
-"            while p.get_available_packet_count() > 0:\n"
-"                print(\"Received message from client: %s\" % p.get_packet()."
-"get_string_from_utf8())\n"
-"                p.put_packet(\"Hello DTLS client\".to_utf8())\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# client.gd\n"
-"extends Node\n"
-"\n"
-"var dtls := PacketPeerDTLS.new()\n"
-"var udp := PacketPeerUDP.new()\n"
-"var connected = false\n"
-"\n"
-"func _ready():\n"
-"    udp.connect_to_host(\"127.0.0.1\", 4242)\n"
-"    dtls.connect_to_peer(udp, false) # Use true in production for "
-"certificate validation!\n"
-"\n"
-"func _process(delta):\n"
-"    dtls.poll()\n"
-"    if dtls.get_status() == PacketPeerDTLS.STATUS_CONNECTED:\n"
-"        if !connected:\n"
-"            # Try to contact server\n"
-"            dtls.put_packet(\"The answer is... 42!\".to_utf8())\n"
-"        while dtls.get_available_packet_count() > 0:\n"
-"            print(\"Connected: %s\" % dtls.get_packet()."
-"get_string_from_utf8())\n"
-"            connected = true\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/DTLSServer.xml
-msgid ""
-"Setup the DTLS server to use the given [code]private_key[/code] and provide "
-"the given [code]certificate[/code] to clients. You can pass the optional "
-"[code]chain[/code] parameter to provide additional CA chain information "
-"along with the certificate."
-msgstr ""
-
-#: doc/classes/DTLSServer.xml
-msgid ""
-"Try to initiate the DTLS handshake with the given [code]udp_peer[/code] "
-"which must be already connected (see [method PacketPeerUDP."
-"connect_to_host]).\n"
-"[b]Note:[/b] You must check that the state of the return PacketPeerUDP is "
-"[constant PacketPeerDTLS.STATUS_HANDSHAKING], as it is normal that 50% of "
-"the new connections will be invalid due to cookie exchange."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "DynamicFont renders vector font files at runtime."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"DynamicFont renders vector font files dynamically at runtime instead of "
-"using a prerendered texture atlas like [BitmapFont]. This trades the faster "
-"loading time of [BitmapFont]s for the ability to change font parameters like "
-"size and spacing during runtime. [DynamicFontData] is used for referencing "
-"the font file paths. DynamicFont also supports defining one or more fallback "
-"fonts, which will be used when displaying a character not supported by the "
-"main font.\n"
-"DynamicFont uses the [url=https://www.freetype.org/]FreeType[/url] library "
-"for rasterization. Supported formats are TrueType ([code].ttf[/code]), "
-"OpenType ([code].otf[/code]), Web Open Font Format 1 ([code].woff[/code]), "
-"and  Web Open Font Format 2 ([code].woff2[/code]).\n"
-"[codeblock]\n"
-"var dynamic_font = DynamicFont.new()\n"
-"dynamic_font.font_data = load(\"res://BarlowCondensed-Bold.ttf\")\n"
-"dynamic_font.size = 64\n"
-"$\"Label\".set(\"custom_fonts/font\", dynamic_font)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] DynamicFont doesn't support features such as kerning, right-to-"
-"left typesetting, ligatures, text shaping, variable fonts and optional font "
-"features yet. If you wish to \"bake\" an optional font feature into a TTF "
-"font file, you can use [url=https://fontforge.org/]FontForge[/url] to do so. "
-"In FontForge, use [b]File > Generate Fonts[/b], click [b]Options[/b], choose "
-"the desired features then generate the font."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Adds a fallback font."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"Returns a string containing all the characters available in the main and all "
-"the fallback fonts.\n"
-"If a given character is included in more than one font, it appears only once "
-"in the returned string."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Returns the fallback font at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Returns the number of fallback fonts."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"Returns the spacing for the given [code]type[/code] (see [enum SpacingType])."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Removes the fallback font at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Sets the fallback font at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"Sets the spacing for [code]type[/code] (see [enum SpacingType]) to "
-"[code]value[/code] in pixels (not relative to the font size)."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Extra spacing at the bottom in pixels."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"Extra spacing for each character in pixels.\n"
-"This can be a negative number to make the distance between characters "
-"smaller."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"Extra spacing for the space character (in addition to [member "
-"extra_spacing_char]) in pixels.\n"
-"This can be a negative number to make the distance between words smaller."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Extra spacing at the top in pixels."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "The font data."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"The font outline's color.\n"
-"[b]Note:[/b] It's recommended to leave this at the default value so that you "
-"can adjust it in individual controls. For example, if the outline is made "
-"black here, it won't be possible to change its color using a Label's font "
-"outline modulate theme item."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "The font outline's thickness in pixels (not relative to the font size)."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "The font size in pixels."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"If [code]true[/code], filtering is used. This makes the font blurry instead "
-"of pixelated when scaling it if font oversampling is disabled or "
-"ineffective. It's recommended to enable this when using the font in a "
-"control whose size changes over time, unless a pixel art aesthetic is "
-"desired."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid ""
-"If [code]true[/code], mipmapping is used. This improves the font's "
-"appearance when downscaling it if font oversampling is disabled or "
-"ineffective."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Spacing at the top."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Spacing at the bottom."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Spacing for each character."
-msgstr ""
-
-#: doc/classes/DynamicFont.xml
-msgid "Spacing for the space character."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid "Used with [DynamicFont] to describe the location of a font file."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid ""
-"Used with [DynamicFont] to describe the location of a vector font file for "
-"dynamic rendering at runtime."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid ""
-"If [code]true[/code], the font is rendered with anti-aliasing. This property "
-"applies both to the main font and its outline (if it has one)."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid "The path to the vector font file."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid "The font hinting mode used by FreeType. See [enum Hinting] for options."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid ""
-"If set to a value greater than [code]0.0[/code], it will override default "
-"font oversampling, ignoring [member SceneTree.use_font_oversampling] value "
-"and viewport stretch mode."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid "Disables font hinting (smoother but less crisp)."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid "Use the light font hinting mode."
-msgstr ""
-
-#: doc/classes/DynamicFontData.xml
-msgid "Use the default font hinting mode (crisper but less smooth)."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid "A script that is executed when exporting the project."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"[EditorExportPlugin]s are automatically invoked whenever the user exports "
-"the project. Their most common use is to determine what files are being "
-"included in the exported project. For each plugin, [method _export_begin] is "
-"called at the beginning of the export process and then [method _export_file] "
-"is called for each exported file.\n"
-"To use [EditorExportPlugin], register it using the [method EditorPlugin."
-"add_export_plugin] method first."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Virtual method to be overridden by the user. It is called when the export "
-"starts and provides all information about the export. [code]features[/code] "
-"is the list of features for the export, [code]is_debug[/code] is [code]true[/"
-"code] for debug builds, [code]path[/code] is the target path for the "
-"exported project. [code]flags[/code] is only used when running a runnable "
-"profile, e.g. when using native run on Android."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Virtual method to be overridden by the user. Called when the export is "
-"finished."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Virtual method to be overridden by the user. Called for each exported file, "
-"providing arguments that can be used to identify the file. [code]path[/code] "
-"is the path of the file, [code]type[/code] is the [Resource] represented by "
-"the file (e.g. [PackedScene]) and [code]features[/code] is the list of "
-"features for the export.\n"
-"Calling [method skip] inside this callback will make the file not included "
-"in the export."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds a custom file to be exported. [code]path[/code] is the virtual path "
-"that can be used to load the file, [code]file[/code] is the binary data of "
-"the file. If [code]remap[/code] is [code]true[/code], file will not be "
-"exported, but instead remapped to the given [code]path[/code]."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds an iOS bundle file from the given [code]path[/code] to the exported "
-"project."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds a C++ code to the iOS export. The final code is created from the code "
-"appended by each active export plugin."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds a dynamic library (*.dylib, *.framework) to Linking Phase in iOS's "
-"Xcode project and embeds it into resulting binary.\n"
-"[b]Note:[/b] For static libraries (*.a) works in same way as [method "
-"add_ios_framework].\n"
-"This method should not be used for System libraries as they are already "
-"present on the device."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds a static library (*.a) or dynamic library (*.dylib, *.framework) to "
-"Linking Phase in iOS's Xcode project."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid "Adds linker flags for the iOS export."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid "Adds content for iOS Property List files."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid "Adds a static lib from the given [code]path[/code] to the iOS project."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds file or directory matching [code]path[/code] to [code]PlugIns[/code] "
-"directory of macOS app bundle.\n"
-"[b]Note:[/b] This is useful only for macOS exports."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"Adds a shared object or a directory containing only shared objects with the "
-"given [code]tags[/code] and destination [code]path[/code].\n"
-"[b]Note:[/b] In case of macOS exports, those shared objects will be added to "
-"[code]Frameworks[/code] directory of app bundle.\n"
-"In case of a directory code-sign will error if you place non code object in "
-"directory."
-msgstr ""
-
-#: doc/classes/EditorExportPlugin.xml
-msgid ""
-"To be called inside [method _export_file]. Skips the current file, so it's "
-"not included in the export."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"An editor feature profile which can be used to disable specific features."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"An editor feature profile can be used to disable specific features of the "
-"Godot editor. When disabled, the features won't appear in the editor, which "
-"makes the editor less cluttered. This is useful in education settings to "
-"reduce confusion or when working in a team. For example, artists and level "
-"designers could use a feature profile that disables the script editor to "
-"avoid accidentally making changes to files they aren't supposed to edit.\n"
-"To manage editor feature profiles visually, use [b]Editor > Manage Feature "
-"Profiles...[/b] at the top of the editor window."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid "Returns the specified [code]feature[/code]'s human-readable name."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Returns [code]true[/code] if the class specified by [code]class_name[/code] "
-"is disabled. When disabled, the class won't appear in the Create New Node "
-"dialog."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Returns [code]true[/code] if editing for the class specified by "
-"[code]class_name[/code] is disabled. When disabled, the class will still "
-"appear in the Create New Node dialog but the inspector will be read-only "
-"when selecting a node that extends the class."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Returns [code]true[/code] if [code]property[/code] is disabled in the class "
-"specified by [code]class_name[/code]. When a property is disabled, it won't "
-"appear in the inspector when selecting a node that extends the class "
-"specified by [code]class_name[/code]."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Returns [code]true[/code] if the [code]feature[/code] is disabled. When a "
-"feature is disabled, it will disappear from the editor entirely."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Loads an editor feature profile from a file. The file must follow the JSON "
-"format obtained by using the feature profile manager's [b]Export[/b] button "
-"or the [method save_to_file] method."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Saves the editor feature profile to a file in JSON format. It can then be "
-"imported using the feature profile manager's [b]Import[/b] button or the "
-"[method load_from_file] method."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"If [code]disable[/code] is [code]true[/code], disables the class specified "
-"by [code]class_name[/code]. When disabled, the class won't appear in the "
-"Create New Node dialog."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"If [code]disable[/code] is [code]true[/code], disables editing for the class "
-"specified by [code]class_name[/code]. When disabled, the class will still "
-"appear in the Create New Node dialog but the inspector will be read-only "
-"when selecting a node that extends the class."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"If [code]disable[/code] is [code]true[/code], disables editing for "
-"[code]property[/code] in the class specified by [code]class_name[/code]. "
-"When a property is disabled, it won't appear in the inspector when selecting "
-"a node that extends the class specified by [code]class_name[/code]."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"If [code]disable[/code] is [code]true[/code], disables the editor feature "
-"specified in [code]feature[/code]. When a feature is disabled, it will "
-"disappear from the editor entirely."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"The 3D editor. If this feature is disabled, the 3D editor won't display but "
-"3D nodes will still display in the Create New Node dialog."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"The Script tab, which contains the script editor and class reference "
-"browser. If this feature is disabled, the Script tab won't display."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"The AssetLib tab. If this feature is disabled, the AssetLib tab won't "
-"display."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"Scene tree editing. If this feature is disabled, the Scene tree dock will "
-"still be visible but will be read-only."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"The Node dock. If this feature is disabled, signals and groups won't be "
-"visible and modifiable from the editor."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"The FileSystem dock. If this feature is disabled, the FileSystem dock won't "
-"be visible."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml
-msgid ""
-"The Import dock. If this feature is disabled, the Import dock won't be "
-"visible."
-msgstr ""
-
-#: doc/classes/EditorFeatureProfile.xml doc/classes/SpatialMaterial.xml
-msgid "Represents the size of the [enum Feature] enum."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "A modified version of [FileDialog] used by the editor."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"Adds a comma-delimited file extension filter option to the "
-"[EditorFileDialog] with an optional semi-colon-delimited label.\n"
-"For example, [code]\"*.tscn, *.scn; Scenes\"[/code] results in filter text "
-"\"Scenes (*.tscn, *.scn)\"."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "Removes all filters except for \"All Files (*)\"."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"Returns the [code]VBoxContainer[/code] used to display the file system.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"Notify the [EditorFileDialog] that its view of the data is no longer "
-"accurate. Updates the view contents on next view update."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The location from which the user may select a file, including [code]res://[/"
-"code], [code]user://[/code], and the local file system."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "The currently occupied directory."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "The currently selected file."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "The file system path in the address bar."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"If [code]true[/code], the [EditorFileDialog] will not warn the user before "
-"overwriting files."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The view format in which the [EditorFileDialog] displays resources to the "
-"user."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The purpose of the [EditorFileDialog], which defines the allowed behaviors."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"If [code]true[/code], hidden files and directories will be visible in the "
-"[EditorFileDialog]."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "Emitted when a directory is selected."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "Emitted when a file is selected."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "Emitted when multiple files are selected."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can select only one file. Accepting the window will "
-"open the file."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can select multiple files. Accepting the window will "
-"open all files."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can select only one directory. Accepting the window "
-"will open the directory."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can select a file or directory. Accepting the window "
-"will open it."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can select only one file. Accepting the window will "
-"save the file."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can only view [code]res://[/code] directory contents."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid ""
-"The [EditorFileDialog] can only view [code]user://[/code] directory contents."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "The [EditorFileDialog] can view the entire local file system."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "The [EditorFileDialog] displays resources as thumbnails."
-msgstr ""
-
-#: doc/classes/EditorFileDialog.xml
-msgid "The [EditorFileDialog] displays resources as a list of filenames."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Resource filesystem, as the editor sees it."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid ""
-"This object holds information of all resources in the filesystem, their "
-"types, etc.\n"
-"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
-"the singleton using [method EditorInterface.get_resource_filesystem]."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid ""
-"Returns the resource type of the file, given the full path. This returns a "
-"string such as [code]\"Resource\"[/code] or [code]\"GDScript\"[/code], "
-"[i]not[/i] a file extension such as [code]\".gd\"[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Gets the root directory object."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Returns a view into the filesystem at [code]path[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Returns the scan progress for 0 to 1 if the FS is being scanned."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if the filesystem is being scanned."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Scan the filesystem for changes."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Check if the source of any imported resource changed."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid ""
-"Update a file information. Call this if an external program (not Godot) "
-"modified the file."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Scans the script files and updates the list of custom class names."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Emitted if the filesystem changed."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Emitted if a resource is reimported."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid ""
-"Emitted if at least one resource is reloaded when the filesystem is scanned."
-msgstr ""
-
-#: doc/classes/EditorFileSystem.xml
-msgid "Emitted if the source of any imported file changed."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "A directory for the resource filesystem."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "A more generalized, low-level variation of the directory concept."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns the index of the directory with name [code]name[/code] or [code]-1[/"
-"code] if not found."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns the index of the file with name [code]name[/code] or [code]-1[/code] "
-"if not found."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the name of the file at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the number of files in this directory."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns [code]true[/code] if the file at index [code]idx[/code] imported "
-"properly."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the path to the file at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns the base class of the script class defined in the file at index "
-"[code]idx[/code]. If the file doesn't define a script class using the "
-"[code]class_name[/code] syntax, this will return an empty string."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns the name of the script class defined in the file at index [code]idx[/"
-"code]. If the file doesn't define a script class using the [code]class_name[/"
-"code] syntax, this will return an empty string."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns the resource type of the file at index [code]idx[/code]. This "
-"returns a string such as [code]\"Resource\"[/code] or [code]\"GDScript\"[/"
-"code], [i]not[/i] a file extension such as [code]\".gd\"[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the name of this directory."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid ""
-"Returns the parent directory for this directory or [code]null[/code] if "
-"called on a directory at [code]res://[/code] or [code]user://[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the path to this directory."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the subdirectory at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/EditorFileSystemDirectory.xml
-msgid "Returns the number of subdirectories in this directory."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Registers a custom resource importer in the editor. Use the class to parse "
-"any file and import it as a new resource type."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"[EditorImportPlugin]s provide a way to extend the editor's resource import "
-"functionality. Use them to import resources from custom files or to provide "
-"alternatives to the editor's existing importers.\n"
-"EditorImportPlugins work by associating with specific file extensions and a "
-"resource type. See [method get_recognized_extensions] and [method "
-"get_resource_type]. They may optionally specify some import presets that "
-"affect the import process. EditorImportPlugins are responsible for creating "
-"the resources and saving them in the [code].import[/code] directory (see "
-"[member ProjectSettings.application/config/"
-"use_hidden_project_data_directory]).\n"
-"Below is an example EditorImportPlugin that imports a [Mesh] from a file "
-"with the extension \".special\" or \".spec\":\n"
-"[codeblock]\n"
-"tool\n"
-"extends EditorImportPlugin\n"
-"\n"
-"func get_importer_name():\n"
-"    return \"my.special.plugin\"\n"
-"\n"
-"func get_visible_name():\n"
-"    return \"Special Mesh\"\n"
-"\n"
-"func get_recognized_extensions():\n"
-"    return [\"special\", \"spec\"]\n"
-"\n"
-"func get_save_extension():\n"
-"    return \"mesh\"\n"
-"\n"
-"func get_resource_type():\n"
-"    return \"Mesh\"\n"
-"\n"
-"func get_preset_count():\n"
-"    return 1\n"
-"\n"
-"func get_preset_name(i):\n"
-"    return \"Default\"\n"
-"\n"
-"func get_import_options(i):\n"
-"    return [{\"name\": \"my_option\", \"default_value\": false}]\n"
-"\n"
-"func import(source_file, save_path, options, platform_variants, gen_files):\n"
-"    var file = File.new()\n"
-"    if file.open(source_file, File.READ) != OK:\n"
-"        return FAILED\n"
-"\n"
-"    var mesh = Mesh.new()\n"
-"    # Fill the Mesh with data read in \"file\", left as an exercise to the "
-"reader\n"
-"\n"
-"    var filename = save_path + \".\" + get_save_extension()\n"
-"    return ResourceSaver.save(filename, mesh)\n"
-"[/codeblock]\n"
-"To use [EditorImportPlugin], register it using the [method EditorPlugin."
-"add_import_plugin] method first."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the options and default values for the preset at this index. Returns an "
-"Array of Dictionaries with the following keys: [code]name[/code], "
-"[code]default_value[/code], [code]property_hint[/code] (optional), "
-"[code]hint_string[/code] (optional), [code]usage[/code] (optional)."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the order of this importer to be run when importing resources. "
-"Importers with [i]lower[/i] import orders will be called first, and higher "
-"values will be called later. Use this to ensure the importer runs after the "
-"dependencies are already imported. The default import order is [code]0[/"
-"code] unless overridden by a specific importer. See [enum ResourceImporter."
-"ImportOrder] for some predefined values."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid "Gets the unique name of the importer."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"This method can be overridden to hide specific import options if conditions "
-"are met. This is mainly useful for hiding options that depend on others if "
-"one of them is disabled. For example:\n"
-"[codeblock]\n"
-"func get_option_visibility(option, options):\n"
-"    # Only show the lossy quality setting if the compression mode is set to "
-"\"Lossy\".\n"
-"    if option == \"compress/lossy_quality\" and options.has(\"compress/"
-"mode\"):\n"
-"        return int(options[\"compress/mode\"]) == COMPRESS_LOSSY\n"
-"\n"
-"    return true\n"
-"[/codeblock]\n"
-"Return [code]true[/code] to make all options always visible."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the number of initial presets defined by the plugin. Use [method "
-"get_import_options] to get the default options for the preset and [method "
-"get_preset_name] to get the name of the preset."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid "Gets the name of the options preset at this index."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the priority of this plugin for the recognized extension. Higher "
-"priority plugins will be preferred. The default priority is [code]1.0[/code]."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the list of file extensions to associate with this loader (case-"
-"insensitive). e.g. [code][\"obj\"][/code]."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the Godot resource type associated with this loader. e.g. "
-"[code]\"Mesh\"[/code] or [code]\"Animation\"[/code]."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the extension used to save this resource in the [code].import[/code] "
-"directory (see [member ProjectSettings.application/config/"
-"use_hidden_project_data_directory])."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Gets the name to display in the import window. You should choose this name "
-"as a continuation to \"Import as\", e.g. \"Import as Special Mesh\"."
-msgstr ""
-
-#: doc/classes/EditorImportPlugin.xml
-msgid ""
-"Imports [code]source_file[/code] into [code]save_path[/code] with the import "
-"[code]options[/code] specified. The [code]platform_variants[/code] and "
-"[code]gen_files[/code] arrays will be modified by this function.\n"
-"This method must be overridden to do the actual importing work. See this "
-"class' description for an example of overriding this method."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid "A control used to edit properties of an object."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid ""
-"This is the control that implements property editing in the editor's "
-"Settings dialogs, the Inspector dock, etc. To get the [EditorInspector] used "
-"in the editor's Inspector dock, use [method EditorInterface.get_inspector].\n"
-"[EditorInspector] will show properties in the same order as the array "
-"returned by [method Object.get_property_list].\n"
-"If a property's name is path-like (i.e. if it contains forward slashes), "
-"[EditorInspector] will create nested sections for \"directories\" along the "
-"path. For example, if a property is named [code]highlighting/gdscript/"
-"node_path_color[/code], it will be shown as \"Node Path Color\" inside the "
-"\"GDScript\" section nested inside the \"Highlighting\" section.\n"
-"If a property has [constant @GlobalScope.PROPERTY_USAGE_GROUP] usage, it "
-"will group subsequent properties whose name starts with the property's hint "
-"string. The group ends when a property does not start with that hint string "
-"or when a new group starts. An empty group name effectively ends the current "
-"group. [EditorInspector] will create a top-level section for each group. For "
-"example, if a property with group usage is named [code]Collide With[/code] "
-"and its hint string is [code]collide_with_[/code], a subsequent "
-"[code]collide_with_area[/code] property will be shown as \"Area\" inside the "
-"\"Collide With\" section.\n"
-"[b]Note:[/b] Unlike sections created from path-like property names, "
-"[EditorInspector] won't capitalize the name for sections created from "
-"groups. So properties with group usage usually use capitalized names instead "
-"of snake_cased names."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid ""
-"Refreshes the inspector.\n"
-"[b]Note:[/b] To save on CPU resources, calling this method will do nothing "
-"if the time specified in [code]docks/property_editor/auto_refresh_interval[/"
-"code] editor setting hasn't passed yet since this method was last called. "
-"(By default, this interval is set to 0.3 seconds.)"
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid ""
-"Emitted when the Edit button of an [Object] has been pressed in the "
-"inspector. This is mainly used in the remote scene tree inspector."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid "Emitted when a property is edited in the inspector."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid ""
-"Emitted when a property is keyed in the inspector. Properties can be keyed "
-"by clicking the \"key\" icon next to a property when the Animation panel is "
-"toggled."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid "Emitted when a property is selected in the inspector."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid ""
-"Emitted when a boolean property is toggled in the inspector.\n"
-"[b]Note:[/b] This signal is never emitted if the internal [code]autoclear[/"
-"code] property enabled. Since this property is always enabled in the editor "
-"inspector, this signal is never emitted by the editor itself."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid "Emitted when a resource is selected in the inspector."
-msgstr ""
-
-#: doc/classes/EditorInspector.xml
-msgid ""
-"Emitted when a property that requires a restart to be applied is edited in "
-"the inspector. This is only used in the Project Settings and Editor Settings."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Plugin for adding custom property editors on inspector."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid ""
-"[EditorInspectorPlugin] allows adding custom property editors to "
-"[EditorInspector].\n"
-"When an object is edited, the [method can_handle] function is called and "
-"must return [code]true[/code] if the object type is supported.\n"
-"If supported, the function [method parse_begin] will be called, allowing to "
-"place custom controls at the beginning of the class.\n"
-"Subsequently, the [method parse_category] and [method parse_property] are "
-"called for every category and property. They offer the ability to add custom "
-"controls to the inspector too.\n"
-"Finally, [method parse_end] will be called.\n"
-"On each of these calls, the \"add\" functions can be called.\n"
-"To use [EditorInspectorPlugin], register it using the [method EditorPlugin."
-"add_inspector_plugin] method first."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Inspector plugins"
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Adds a custom control, which is not necessarily a property editor."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid ""
-"Adds a property editor for an individual property. The [code]editor[/code] "
-"control must extend [EditorProperty]."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid ""
-"Adds an editor that allows modifying multiple properties. The [code]editor[/"
-"code] control must extend [EditorProperty]."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Returns [code]true[/code] if this object can be handled by this plugin."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Called to allow adding controls at the beginning of the list."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Called to allow adding controls at the beginning of the category."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid "Called to allow adding controls at the end of the list."
-msgstr ""
-
-#: doc/classes/EditorInspectorPlugin.xml
-msgid ""
-"Called to allow adding property specific editors to the inspector. Usually "
-"these inherit [EditorProperty]. Returning [code]true[/code] removes the "
-"built-in editor for this property, otherwise allows to insert a custom "
-"editor before the built-in one."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Godot editor's interface."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"EditorInterface gives you control over Godot editor's window. It allows "
-"customizing the window, saving and (re-)loading scenes, rendering mesh "
-"previews, inspecting and editing resources and objects, and provides access "
-"to [EditorSettings], [EditorFileSystem], [EditorResourcePreview], "
-"[ScriptEditor], the editor viewport, and information about scenes.\n"
-"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
-"the singleton using [method EditorPlugin.get_editor_interface]."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Edits the given [Node]. The node will be also selected if it's inside the "
-"scene tree."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Edits the given [Resource]. If the resource is a [Script] you can also edit "
-"it with [method edit_script] to specify the line and column position."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Edits the given [Script]. The line and column on which to open the script "
-"can also be specified. The script will be open with the user-configured "
-"editor for the script's language which may be an external editor."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the main container of Godot editor's window. For example, you can "
-"use it to retrieve the size of the container and place your controls "
-"accordingly.\n"
-"[b]Warning:[/b] Removing and freeing this node will render the editor "
-"useless and may cause a crash."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns the current path being viewed in the [FileSystemDock]."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns the edited (current) scene's root [Node]."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the actual scale of the editor UI ([code]1.0[/code] being 100% "
-"scale). This can be used to adjust position and dimensions of the UI added "
-"by plugins.\n"
-"[b]Note:[/b] This value is set via the [code]interface/editor/display_scale[/"
-"code] and [code]interface/editor/custom_display_scale[/code] editor "
-"settings. Editor must be restarted for changes to be properly applied."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns the editor's [EditorSettings] instance."
-msgstr "Gibt die [EditorSettings] Instanz des Editors zurück."
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the main editor control. Use this as a parent for main screens.\n"
-"[b]Note:[/b] This returns the main editor control containing the whole "
-"editor, not the 2D or 3D viewports specifically.\n"
-"[b]Warning:[/b] Removing and freeing this node will render a part of the "
-"editor useless and may cause a crash."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the editor's [FileSystemDock] instance.\n"
-"[b]Warning:[/b] Removing and freeing this node will render a part of the "
-"editor useless and may cause a crash."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the editor's [EditorInspector] instance.\n"
-"[b]Warning:[/b] Removing and freeing this node will render a part of the "
-"editor useless and may cause a crash."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns an [Array] with the file paths of the currently opened scenes."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the name of the scene that is being played. If no scene is currently "
-"being played, returns an empty string."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns the editor's [EditorFileSystem] instance."
-msgstr "Gibt die [EditorFileSystem]-Instanz des Editors zurück."
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns the editor's [EditorResourcePreview] instance."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the editor's [ScriptEditor] instance.\n"
-"[b]Warning:[/b] Removing and freeing this node will render a part of the "
-"editor useless and may cause a crash."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns the path of the directory currently selected in the "
-"[FileSystemDock]. If a file is selected, its base directory will be returned "
-"using [method String.get_base_dir] instead."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Returns the editor's [EditorSelection] instance."
-msgstr "Gibt die [EditorSelection]-Instanz des Editors zurück."
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Shows the given property on the given [code]object[/code] in the editor's "
-"Inspector dock. If [code]inspector_only[/code] is [code]true[/code], plugins "
-"will not attempt to edit [code]object[/code]."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns [code]true[/code] if a scene is currently being played, [code]false[/"
-"code] otherwise. Paused scenes are considered as being played."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn eine Szene gerade abgespielt wird, sonst "
-"[code]false[/code]. Pausierte Szenen werden als abgespielt betrachtet."
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns [code]true[/code] if the specified [code]plugin[/code] is enabled. "
-"The plugin name is the same as its directory name."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das angegebene [code]Plugin[/code] "
-"aktiviert ist. Der Plugin-Name ist derselbe wie sein Verzeichnisname."
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Returns mesh previews rendered at the given size as an [Array] of [Texture]s."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Opens the scene at the given path."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Plays the currently active scene."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Plays the scene specified by its filepath."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Plays the main scene."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Reloads the scene at the given path."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Saves the scene. Returns either [code]OK[/code] or [code]ERR_CANT_CREATE[/"
-"code] (see [@GlobalScope] constants)."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Saves the scene as a file at [code]path[/code]."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Selects the file, with the path provided by [code]file[/code], in the "
-"FileSystem dock."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Sets the editor's current main screen to the one specified in [code]name[/"
-"code]. [code]name[/code] must match the text of the tab in question exactly "
-"([code]2D[/code], [code]3D[/code], [code]Script[/code], [code]AssetLib[/"
-"code])."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"Sets the enabled status of a plugin. The plugin name is the same as its "
-"directory name."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid "Stops the scene that is currently playing."
-msgstr ""
-
-#: doc/classes/EditorInterface.xml
-msgid ""
-"If [code]true[/code], enables distraction-free mode which hides side docks "
-"to increase the space available for the main view."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Used by the editor to extend its functionality."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Plugins are used by the editor to extend functionality. The most common "
-"types of plugins are those which edit a given node or resource type, import "
-"plugins and export plugins. See also [EditorScript] to add functions to the "
-"editor."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds a script at [code]path[/code] to the Autoload list as [code]name[/code]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds a control to the bottom panel (together with Output, Debug, Animation, "
-"etc). Returns a reference to the button added. It's up to you to hide/show "
-"the button when needed. When your plugin is deactivated, make sure to remove "
-"your custom control with [method remove_control_from_bottom_panel] and free "
-"it with [method Node.queue_free]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds a custom control to a container (see [enum CustomControlContainer]). "
-"There are many locations where custom controls can be added in the editor "
-"UI.\n"
-"Please remember that you have to manage the visibility of your custom "
-"controls yourself (and likely hide it after adding it).\n"
-"When your plugin is deactivated, make sure to remove your custom control "
-"with [method remove_control_from_container] and free it with [method Node."
-"queue_free]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds the control to a specific dock slot (see [enum DockSlot] for options).\n"
-"If the dock is repositioned and as long as the plugin is active, the editor "
-"will save the dock position on further sessions.\n"
-"When your plugin is deactivated, make sure to remove your custom control "
-"with [method remove_control_from_docks] and free it with [method Node."
-"queue_free]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds a custom type, which will appear in the list of nodes or resources. An "
-"icon can be optionally passed.\n"
-"When given node or resource is selected, the base type will be instanced "
-"(ie, \"Spatial\", \"Control\", \"Resource\"), then the script will be loaded "
-"and set to this object.\n"
-"You can use the virtual method [method handles] to check if your custom "
-"object is being edited by checking the script or using the [code]is[/code] "
-"keyword.\n"
-"During run-time, this will be a simple object with a script so this function "
-"does not need to be called then."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Registers a new [EditorExportPlugin]. Export plugins are used to perform "
-"tasks when the project is being exported.\n"
-"See [method add_inspector_plugin] for an example of how to register a plugin."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Registers a new [EditorImportPlugin]. Import plugins are used to import "
-"custom and unsupported assets as a custom [Resource] type.\n"
-"[b]Note:[/b] If you want to import custom 3D asset formats use [method "
-"add_scene_import_plugin] instead.\n"
-"See [method add_inspector_plugin] for an example of how to register a plugin."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Registers a new [EditorInspectorPlugin]. Inspector plugins are used to "
-"extend [EditorInspector] and provide custom configuration tools for your "
-"object's properties.\n"
-"[b]Note:[/b] Always use [method remove_inspector_plugin] to remove the "
-"registered [EditorInspectorPlugin] when your [EditorPlugin] is disabled to "
-"prevent leaks and an unexpected behavior.\n"
-"[codeblock]\n"
-"const MyInspectorPlugin = preload(\"res://addons/your_addon/path/to/your/"
-"script.gd\")\n"
-"var inspector_plugin = MyInspectorPlugin.new()\n"
-"\n"
-"func _enter_tree():\n"
-"    add_inspector_plugin(inspector_plugin)\n"
-"\n"
-"func _exit_tree():\n"
-"    remove_inspector_plugin(inspector_plugin)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Registers a new [EditorSceneImporter]. Scene importers are used to import "
-"custom 3D asset formats as scenes."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Registers a new [EditorSpatialGizmoPlugin]. Gizmo plugins are used to add "
-"custom gizmos to the 3D preview viewport for a [Spatial].\n"
-"See [method add_inspector_plugin] for an example of how to register a plugin."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds a custom menu item to [b]Project > Tools[/b] as [code]name[/code] that "
-"calls [code]callback[/code] on an instance of [code]handler[/code] with a "
-"parameter [code]ud[/code] when user activates it."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Adds a custom submenu under [b]Project > Tools >[/b] [code]name[/code]. "
-"[code]submenu[/code] should be an object of class [PopupMenu]. This submenu "
-"should be cleaned up using [code]remove_tool_menu_item(name)[/code]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This method is called when the editor is about to save the project, switch "
-"to another tab, etc. It asks the plugin to apply any pending state changes "
-"to ensure consistency.\n"
-"This is used, for example, in shader editors to let the plugin know that it "
-"must apply the shader code being written by the user to the object."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This method is called when the editor is about to run the project. The "
-"plugin can then perform required operations before the project runs.\n"
-"This method must return a boolean. If this method returns [code]false[/"
-"code], the project will not run. The run is aborted immediately, so this "
-"also prevents all other plugins' [method build] methods from running."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Clear all the state and reset the object being edited to zero. This ensures "
-"your plugin does not keep editing a currently existing node, or a node from "
-"the wrong scene."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Called by the engine when the user disables the [EditorPlugin] in the Plugin "
-"tab of the project settings window."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This function is used for plugins that edit specific object types (nodes or "
-"resources). It requests the editor to edit the given object."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Called by the engine when the user enables the [EditorPlugin] in the Plugin "
-"tab of the project settings window."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Called by the engine when the 2D editor's viewport is updated. Use the "
-"[code]overlay[/code] [Control] for drawing. You can update the viewport "
-"manually by calling [method update_overlays].\n"
-"[codeblock]\n"
-"func forward_canvas_draw_over_viewport(overlay):\n"
-"    # Draw a circle at cursor position.\n"
-"    overlay.draw_circle(overlay.get_local_mouse_position(), 64, Color."
-"white)\n"
-"\n"
-"func forward_canvas_gui_input(event):\n"
-"    if event is InputEventMouseMotion:\n"
-"        # Redraw viewport when cursor is moved.\n"
-"        update_overlays()\n"
-"        return true\n"
-"    return false\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This method is the same as [method forward_canvas_draw_over_viewport], "
-"except it draws on top of everything. Useful when you need an extra layer "
-"that shows over anything else.\n"
-"You need to enable calling of this method by using [method "
-"set_force_draw_over_forwarding_enabled]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Called when there is a root node in the current edited scene, [method "
-"handles] is implemented and an [InputEvent] happens in the 2D viewport. "
-"Intercepts the [InputEvent], if [code]return true[/code] [EditorPlugin] "
-"consumes the [code]event[/code], otherwise forwards [code]event[/code] to "
-"other Editor classes. Example:\n"
-"[codeblock]\n"
-"# Prevents the InputEvent to reach other Editor classes\n"
-"func forward_canvas_gui_input(event):\n"
-"    var forward = true\n"
-"    return forward\n"
-"[/codeblock]\n"
-"Must [code]return false[/code] in order to forward the [InputEvent] to other "
-"Editor classes. Example:\n"
-"[codeblock]\n"
-"# Consumes InputEventMouseMotion and forwards other InputEvent types\n"
-"func forward_canvas_gui_input(event):\n"
-"    var forward = false\n"
-"    if event is InputEventMouseMotion:\n"
-"        forward = true\n"
-"    return forward\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Called by the engine when the 3D editor's viewport is updated. Use the "
-"[code]overlay[/code] [Control] for drawing. You can update the viewport "
-"manually by calling [method update_overlays].\n"
-"[codeblock]\n"
-"func forward_spatial_draw_over_viewport(overlay):\n"
-"    # Draw a circle at cursor position.\n"
-"    overlay.draw_circle(overlay.get_local_mouse_position(), 64)\n"
-"\n"
-"func forward_spatial_gui_input(camera, event):\n"
-"    if event is InputEventMouseMotion:\n"
-"        # Redraw viewport when cursor is moved.\n"
-"        update_overlays()\n"
-"        return true\n"
-"    return false\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This method is the same as [method forward_spatial_draw_over_viewport], "
-"except it draws on top of everything. Useful when you need an extra layer "
-"that shows over anything else.\n"
-"You need to enable calling of this method by using [method "
-"set_force_draw_over_forwarding_enabled]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Called when there is a root node in the current edited scene, [method "
-"handles] is implemented and an [InputEvent] happens in the 3D viewport. "
-"Intercepts the [InputEvent], if [code]return true[/code] [EditorPlugin] "
-"consumes the [code]event[/code], otherwise forwards [code]event[/code] to "
-"other Editor classes. Example:\n"
-"[codeblock]\n"
-"# Prevents the InputEvent to reach other Editor classes\n"
-"func forward_spatial_gui_input(camera, event):\n"
-"    var forward = true\n"
-"    return forward\n"
-"[/codeblock]\n"
-"Must [code]return false[/code] in order to forward the [InputEvent] to other "
-"Editor classes. Example:\n"
-"[codeblock]\n"
-"# Consumes InputEventMouseMotion and forwards other InputEvent types\n"
-"func forward_spatial_gui_input(camera, event):\n"
-"    var forward = false\n"
-"    if event is InputEventMouseMotion:\n"
-"        forward = true\n"
-"    return forward\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This is for editors that edit script-based objects. You can return a list of "
-"breakpoints in the format ([code]script:line[/code]), for example: "
-"[code]res://path_to_script.gd:25[/code]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Returns the [EditorInterface] object that gives you control over Godot "
-"editor's window and its functionalities."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Override this method in your plugin to return a [Texture] in order to give "
-"it an icon.\n"
-"For main screen plugins, this appears at the top of the screen, to the right "
-"of the \"2D\", \"3D\", \"Script\", and \"AssetLib\" buttons.\n"
-"Ideally, the plugin icon should be white with a transparent background and "
-"16x16 pixels in size.\n"
-"[codeblock]\n"
-"func get_plugin_icon():\n"
-"    # You can use a custom icon:\n"
-"    return preload(\"res://addons/my_plugin/my_plugin_icon.svg\")\n"
-"    # Or use a built-in icon:\n"
-"    return get_editor_interface().get_base_control().get_icon(\"Node\", "
-"\"EditorIcons\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Override this method in your plugin to provide the name of the plugin when "
-"displayed in the Godot editor.\n"
-"For main screen plugins, this appears at the top of the screen, to the right "
-"of the \"2D\", \"3D\", \"Script\", and \"AssetLib\" buttons."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Gets the Editor's dialog used for making scripts.\n"
-"[b]Note:[/b] Users can configure it before use.\n"
-"[b]Warning:[/b] Removing and freeing this node will render a part of the "
-"editor useless and may cause a crash."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Override this method to provide a state data you want to be saved, like view "
-"position, grid settings, folding, etc. This is used when saving the scene "
-"(so state is kept when opening it again) and for switching tabs (so state "
-"can be restored when the tab returns). This data is automatically saved for "
-"each scene in an [code]editstate[/code] file in the editor metadata folder. "
-"If you want to store global (scene-independent) editor data for your plugin, "
-"you can use [method get_window_layout] instead.\n"
-"Use [method set_state] to restore your saved state.\n"
-"[b]Note:[/b] This method should not be used to save important settings that "
-"should persist with the project.\n"
-"[b]Note:[/b] You must implement [method get_plugin_name] for the state to be "
-"stored and restored correctly.\n"
-"[codeblock]\n"
-"func get_state():\n"
-"    var state = {\"zoom\": zoom, \"preferred_color\": my_color}\n"
-"    return state\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Gets the undo/redo object. Most actions in the editor can be undoable, so "
-"use this object to make sure this happens when it's worth it."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Override this method to provide the GUI layout of the plugin or any other "
-"data you want to be stored. This is used to save the project's editor layout "
-"when [method queue_save_layout] is called or the editor layout was changed "
-"(for example changing the position of a dock). The data is stored in the "
-"[code]editor_layout.cfg[/code] file in the editor metadata directory.\n"
-"Use [method set_window_layout] to restore your saved layout.\n"
-"[codeblock]\n"
-"func get_window_layout(configuration):\n"
-"    configuration.set_value(\"MyPlugin\", \"window_position\", $Window."
-"position)\n"
-"    configuration.set_value(\"MyPlugin\", \"icon_color\", $Icon.modulate)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Implement this function if your plugin edits a specific type of object "
-"(Resource or Node). If you return [code]true[/code], then you will get the "
-"functions [method edit] and [method make_visible] called when the editor "
-"requests them. If you have declared the methods [method "
-"forward_canvas_gui_input] and [method forward_spatial_gui_input] these will "
-"be called too."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Returns [code]true[/code] if this is a main screen editor plugin (it goes in "
-"the workspace selector together with [b]2D[/b], [b]3D[/b], [b]Script[/b] and "
-"[b]AssetLib[/b])."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Minimizes the bottom panel."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Makes a specific item in the bottom panel visible."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This function will be called when the editor is requested to become visible. "
-"It is used for plugins that edit a specific object type.\n"
-"Remember that you have to manage the visibility of all your editor controls "
-"manually."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Queue save the project's editor layout."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes an Autoload [code]name[/code] from the list."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Removes the control from the bottom panel. You have to manually [method Node."
-"queue_free] the control."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Removes the control from the specified container. You have to manually "
-"[method Node.queue_free] the control."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Removes the control from the dock. You have to manually [method Node."
-"queue_free] the control."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes a custom type added by [method add_custom_type]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes an export plugin registered by [method add_export_plugin]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes an import plugin registered by [method add_import_plugin]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes an inspector plugin registered by [method add_import_plugin]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Removes a scene importer registered by [method add_scene_import_plugin]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes a gizmo plugin registered by [method add_spatial_gizmo_plugin]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Removes a menu [code]name[/code] from [b]Project > Tools[/b]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"This method is called after the editor saves the project or when it's "
-"closed. It asks the plugin to save edited external scenes/resources."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Enables calling of [method forward_canvas_force_draw_over_viewport] for the "
-"2D editor and [method forward_spatial_force_draw_over_viewport] for the 3D "
-"editor when their viewports are updated. You need to call this method only "
-"once and it will work permanently for this plugin."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Use this method if you always want to receive inputs from 3D view screen "
-"inside [method forward_spatial_gui_input]. It might be especially usable if "
-"your plugin will want to use raycast in the scene."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Restore the state saved by [method get_state]. This method is called when "
-"the current scene tab is changed in the editor.\n"
-"[b]Note:[/b] Your plugin must implement [method get_plugin_name], otherwise "
-"it will not be recognized and this method will not be called.\n"
-"[codeblock]\n"
-"func set_state(data):\n"
-"    zoom = data.get(\"zoom\", 1.0)\n"
-"    preferred_color = data.get(\"my_color\", Color.white)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Restore the plugin GUI layout and data saved by [method get_window_layout]. "
-"This method is called for every plugin on editor startup. Use the provided "
-"[code]configuration[/code] file to read your saved data.\n"
-"[codeblock]\n"
-"func set_window_layout(configuration):\n"
-"    $Window.position = configuration.get_value(\"MyPlugin\", "
-"\"window_position\", Vector2())\n"
-"    $Icon.modulate = configuration.get_value(\"MyPlugin\", \"icon_color\", "
-"Color.white)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Updates the overlays of the 2D and 3D editor viewport. Causes methods "
-"[method forward_canvas_draw_over_viewport], [method "
-"forward_canvas_force_draw_over_viewport], [method "
-"forward_spatial_draw_over_viewport] and [method "
-"forward_spatial_force_draw_over_viewport] to be called."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Emitted when user changes the workspace ([b]2D[/b], [b]3D[/b], [b]Script[/"
-"b], [b]AssetLib[/b]). Also works with custom screens defined by plugins."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Emitted when the scene is changed in the editor. The argument will return "
-"the root node of the scene that has just become active. If this scene is new "
-"and empty, the argument will be [code]null[/code]."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid ""
-"Emitted when user closes a scene. The argument is file path to a closed "
-"scene."
-msgstr ""
-
-#: doc/classes/EditorPlugin.xml
-msgid "Represents the size of the [enum DockSlot] enum."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Custom control to edit properties for adding into the inspector."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"This control allows property editing for one or multiple properties into "
-"[EditorInspector]. It is added via [EditorInspectorPlugin]."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"If any of the controls added can gain keyboard focus, add it here. This "
-"ensures that focus will be restored if the inspector is refreshed."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"If one or several properties have changed, this must be called. [code]field[/"
-"code] is used in case your editor can modify fields separately (as an "
-"example, Vector3.x). The [code]changing[/code] argument avoids the editor "
-"requesting this property to be refreshed (leave as [code]false[/code] if "
-"unsure)."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Gets the edited object."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Gets the edited property. If your editor is for a single property (added via "
-"[method EditorInspectorPlugin.parse_property]), then this will return the "
-"property."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Must be implemented to provide a custom tooltip to the property editor."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Puts the [code]editor[/code] control below the property label. The control "
-"must be previously added using [method Node.add_child]."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "When this virtual function is called, you must update your editor."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Used by the inspector, set to [code]true[/code] when the property is "
-"checkable."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Used by the inspector, set to [code]true[/code] when the property is checked."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Used by the inspector, set to [code]true[/code] when the property is drawn "
-"with the editor theme's warning color. This is used for editable children's "
-"properties."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Used by the inspector, set to [code]true[/code] when the property can add "
-"keys for animation."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Set this property to change the label (if you want to show one)."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Used by the inspector, set to [code]true[/code] when the property is read-"
-"only."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Emit it if you want multiple properties modified at the same time. Do not "
-"use if added via [method EditorInspectorPlugin.parse_property]."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Used by sub-inspectors. Emit it if what was selected was an Object ID."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Do not emit this manually, use the [method emit_changed] method instead."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Emitted when a property was checked. Used internally."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Emit it if you want to add this value as an animation key (check for keying "
-"being enabled first)."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Emit it if you want to key a property with a single value."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"Emit it if you want to mark (or unmark) the value of a property for being "
-"saved regardless of being equal to the default value.\n"
-"The default value is the one the property will get when the node is just "
-"instantiated and can come from an ancestor scene in the inheritance/"
-"instancing chain, a script or a builtin class."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid ""
-"If you want a sub-resource to be edited, emit this signal with the resource."
-msgstr ""
-
-#: doc/classes/EditorProperty.xml
-msgid "Emitted when selected. Used internally."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid "Godot editor's control for selecting [Resource] type properties."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"This [Control] node is used in the editor's Inspector dock to allow editing "
-"of [Resource] type properties. It provides options for creating, loading, "
-"saving and converting resources. Can be used with [EditorInspectorPlugin] to "
-"recreate the same behavior.\n"
-"[b]Note:[/b] This [Control] does not include any editor for the resource, as "
-"editing is controlled by the Inspector dock itself or sub-Inspectors."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"Returns a list of all allowed types and subtypes corresponding to the "
-"[member base_type]. If the [member base_type] is empty, an empty list is "
-"returned."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"This virtual method can be implemented to handle context menu items not "
-"handled by default. See [method set_create_options]."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"This virtual method is called when updating the context menu of "
-"[EditorResourcePicker]. Implement this method to override the \"New ...\" "
-"items with your own options. [code]menu_node[/code] is a reference to the "
-"[PopupMenu] node.\n"
-"[b]Note:[/b] Implement [method handle_menu_selected] to handle these custom "
-"items."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"Sets the toggle mode state for the main button. Works only if [member "
-"toggle_mode] is set to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"The base type of allowed resource types. Can be a comma-separated list of "
-"several options."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-#, fuzzy
-msgid "If [code]true[/code], the value can be selected and edited."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/EditorResourcePicker.xml
-#, fuzzy
-msgid "The edited resource value."
-msgstr "Der Animationsschrittwert."
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"If [code]true[/code], the main button with the resource preview works in the "
-"toggle mode. Use [method set_toggle_pressed] to manually set the state."
-msgstr ""
-
-#: doc/classes/EditorResourcePicker.xml
-#, fuzzy
-msgid "Emitted when the value of the edited resource was changed."
-msgstr "Gesendet wenn das Rechteck Element geändert wurde."
-
-#: doc/classes/EditorResourcePicker.xml
-msgid ""
-"Emitted when the resource value was set and user clicked to edit it. When "
-"[code]edit[/code] is [code]true[/code], the signal was caused by the context "
-"menu \"Edit\" option."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid "Helper to generate previews of resources or files."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid ""
-"This object is used to generate previews for resources of files.\n"
-"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
-"the singleton using [method EditorInterface.get_resource_previewer]."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid "Create an own, custom preview generator."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid ""
-"Check if the resource changed, if so, it will be invalidated and the "
-"corresponding signal emitted."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid ""
-"Queue the [code]resource[/code] being edited for preview. Once the preview "
-"is ready, the [code]receiver[/code]'s [code]receiver_func[/code] will be "
-"called. The [code]receiver_func[/code] must take the following four "
-"arguments: [String] path, [Texture] preview, [Texture] thumbnail_preview, "
-"[Variant] userdata. [code]userdata[/code] can be anything, and will be "
-"returned when [code]receiver_func[/code] is called.\n"
-"[b]Note:[/b] If it was not possible to create the preview the "
-"[code]receiver_func[/code] will still be called, but the preview will be "
-"null."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid ""
-"Queue a resource file located at [code]path[/code] for preview. Once the "
-"preview is ready, the [code]receiver[/code]'s [code]receiver_func[/code] "
-"will be called. The [code]receiver_func[/code] must take the following four "
-"arguments: [String] path, [Texture] preview, [Texture] thumbnail_preview, "
-"[Variant] userdata. [code]userdata[/code] can be anything, and will be "
-"returned when [code]receiver_func[/code] is called.\n"
-"[b]Note:[/b] If it was not possible to create the preview the "
-"[code]receiver_func[/code] will still be called, but the preview will be "
-"null."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid "Removes a custom preview generator."
-msgstr ""
-
-#: doc/classes/EditorResourcePreview.xml
-msgid ""
-"Emitted if a preview was invalidated (changed). [code]path[/code] "
-"corresponds to the path of the preview."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid "Custom generator of previews."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid ""
-"Custom code to generate previews. Please check [code]file_dialog/"
-"thumbnail_size[/code] in [EditorSettings] to find out the right size to do "
-"previews at."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid ""
-"If this function returns [code]true[/code], the generator will call [method "
-"generate] or [method generate_from_path] for small previews as well.\n"
-"By default, it returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid ""
-"Generate a preview from a given resource with the specified size. This must "
-"always be implemented.\n"
-"Returning an empty texture is an OK way to fail and let another generator "
-"take care.\n"
-"Care must be taken because this function is always called from a thread (not "
-"the main thread)."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid ""
-"Generate a preview directly from a path with the specified size. "
-"Implementing this is optional, as default code will load and call [method "
-"generate].\n"
-"Returning an empty texture is an OK way to fail and let another generator "
-"take care.\n"
-"Care must be taken because this function is always called from a thread (not "
-"the main thread)."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid ""
-"If this function returns [code]true[/code], the generator will automatically "
-"generate the small previews from the normal preview texture generated by the "
-"methods [method generate] or [method generate_from_path].\n"
-"By default, it returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/EditorResourcePreviewGenerator.xml
-msgid ""
-"Returns [code]true[/code] if your generator supports the resource of type "
-"[code]type[/code]."
-msgstr ""
-
-#: doc/classes/EditorSceneImporter.xml
-msgid "Imports scenes from third-parties' 3D files."
-msgstr ""
-
-#: doc/classes/EditorSceneImporter.xml
-msgid ""
-"[EditorSceneImporter] allows to define an importer script for a third-party "
-"3D format.\n"
-"To use [EditorSceneImporter], register it using the [method EditorPlugin."
-"add_scene_import_plugin] method first."
-msgstr ""
-
-#: modules/fbx/doc_classes/EditorSceneImporterFBX.xml
-msgid "FBX 3D asset importer."
-msgstr ""
-
-#: modules/fbx/doc_classes/EditorSceneImporterFBX.xml
-msgid ""
-"This is an FBX 3D asset importer with full support for most FBX features.\n"
-"If exporting a FBX scene from Autodesk Maya, use these FBX export settings:\n"
-"[codeblock]\n"
-"- Smoothing Groups\n"
-"- Smooth Mesh\n"
-"- Triangluate (for meshes with blend shapes)\n"
-"- Bake Animation\n"
-"- Resample All\n"
-"- Deformed Models\n"
-"- Skins\n"
-"- Blend Shapes\n"
-"- Curve Filters\n"
-"- Constant Key Reducer\n"
-"- Auto Tangents Only\n"
-"- *Do not check* Constraints (as it will break the file)\n"
-"- Can check Embed Media (embeds textures into the exported FBX file)\n"
-"  - Note that when importing embedded media, the texture and mesh will be a "
-"single immutable file.\n"
-"  - You will have to re-export then re-import the FBX if the texture has "
-"changed.\n"
-"- Units: Centimeters\n"
-"- Up Axis: Y\n"
-"- Binary format in FBX 2017\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/gltf/doc_classes/EditorSceneImporterGLTF.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [EditorSceneImporterGLTF] within a script will cause an error in an "
-"exported project."
-msgstr ""
-
-#: doc/classes/EditorScenePostImport.xml
-msgid "Post-processes scenes after import."
-msgstr ""
-
-#: doc/classes/EditorScenePostImport.xml
-msgid ""
-"Imported scenes can be automatically modified right after import by setting "
-"their [b]Custom Script[/b] Import property to a [code]tool[/code] script "
-"that inherits from this class.\n"
-"The [method post_import] callback receives the imported scene's root node "
-"and returns the modified version of the scene. Usage example:\n"
-"[codeblock]\n"
-"tool # Needed so it runs in editor\n"
-"extends EditorScenePostImport\n"
-"\n"
-"# This sample changes all node names\n"
-"\n"
-"# Called right after the scene is imported and gets the root node\n"
-"func post_import(scene):\n"
-"    # Change all node names to \"modified_[oldnodename]\"\n"
-"    iterate(scene)\n"
-"    return scene # Remember to return the imported scene\n"
-"\n"
-"func iterate(node):\n"
-"    if node != null:\n"
-"        node.name = \"modified_\" + node.name\n"
-"        for child in node.get_children():\n"
-"            iterate(child)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorScenePostImport.xml
-msgid ""
-"Returns the source file path which got imported (e.g. [code]res://scene.dae[/"
-"code])."
-msgstr ""
-
-#: doc/classes/EditorScenePostImport.xml
-msgid "Returns the resource folder the imported scene file is located in."
-msgstr ""
-
-#: doc/classes/EditorScenePostImport.xml
-msgid ""
-"Called after the scene was imported. This method must return the modified "
-"version of the scene."
-msgstr ""
-
-#: doc/classes/EditorScript.xml
-msgid "Base script that can be used to add extension functions to the editor."
-msgstr ""
-
-#: doc/classes/EditorScript.xml
-msgid ""
-"Scripts extending this class and implementing its [method _run] method can "
-"be executed from the Script Editor's [b]File > Run[/b] menu option (or by "
-"pressing [code]Ctrl+Shift+X[/code]) while the editor is running. This is "
-"useful for adding custom in-editor functionality to Godot. For more complex "
-"additions, consider using [EditorPlugin]s instead.\n"
-"[b]Note:[/b] Extending scripts need to have [code]tool[/code] mode enabled.\n"
-"[b]Example script:[/b]\n"
-"[codeblock]\n"
-"tool\n"
-"extends EditorScript\n"
-"\n"
-"func _run():\n"
-"    print(\"Hello from the Godot Editor!\")\n"
-"[/codeblock]\n"
-"[b]Note:[/b] The script is run in the Editor context, which means the output "
-"is visible in the console window started with the Editor (stdout) instead of "
-"the usual Godot [b]Output[/b] dock.\n"
-"[b]Note:[/b] EditorScript is reference counted, meaning it is destroyed when "
-"nothing references it. This can cause errors during asynchronous operations "
-"if there are no references to the script."
-msgstr ""
-
-#: doc/classes/EditorScript.xml
-msgid "This method is executed by the Editor when [b]File > Run[/b] is used."
-msgstr ""
-
-#: doc/classes/EditorScript.xml
-msgid ""
-"Adds [code]node[/code] as a child of the root node in the editor context.\n"
-"[b]Warning:[/b] The implementation of this method is currently disabled."
-msgstr ""
-
-#: doc/classes/EditorScript.xml
-msgid "Returns the [EditorInterface] singleton instance."
-msgstr ""
-
-#: doc/classes/EditorScript.xml
-msgid "Returns the Editor's currently active scene."
-msgstr ""
-
-#: doc/classes/EditorScriptPicker.xml
-msgid ""
-"Godot editor's control for selecting the [code]script[/code] property of a "
-"[Node]."
-msgstr ""
-
-#: doc/classes/EditorScriptPicker.xml
-msgid ""
-"Similar to [EditorResourcePicker] this [Control] node is used in the "
-"editor's Inspector dock, but only to edit the [code]script[/code] property "
-"of a [Node]. Default options for creating new resources of all possible "
-"subtypes are replaced with dedicated buttons that open the \"Attach Node "
-"Script\" dialog. Can be used with [EditorInspectorPlugin] to recreate the "
-"same behavior.\n"
-"[b]Note:[/b] You must set the [member script_owner] for the custom context "
-"menu items to work."
-msgstr ""
-
-#: doc/classes/EditorScriptPicker.xml
-msgid "The owner [Node] of the script property that holds the edited resource."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid "Manages the SceneTree selection in the editor."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid ""
-"This object manages the SceneTree selection in the editor.\n"
-"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
-"the singleton using [method EditorInterface.get_selection]."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid ""
-"Adds a node to the selection.\n"
-"[b]Note:[/b] The newly selected node will not be automatically edited in the "
-"inspector. If you want to edit a node, use [method EditorInterface."
-"edit_node]."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid "Clear the selection."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid "Gets the list of selected nodes."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid ""
-"Gets the list of selected nodes, optimized for transform operations (i.e. "
-"moving them, rotating, etc). This list avoids situations where a node is "
-"selected and also child/grandchild."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid "Removes a node from the selection."
-msgstr ""
-
-#: doc/classes/EditorSelection.xml
-msgid "Emitted when the selection changes."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid "Object that holds the project-independent editor settings."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Object that holds the project-independent editor settings. These settings "
-"are generally visible in the [b]Editor > Editor Settings[/b] menu.\n"
-"Property names use slash delimiters to distinguish sections. Setting values "
-"can be of any [Variant] type. It's recommended to use [code]snake_case[/"
-"code] for editor settings to be consistent with the Godot editor itself.\n"
-"Accessing the settings can be done using the following methods, such as:\n"
-"[codeblock]\n"
-"# `settings.set(\"some/property\", value)` also works as this class "
-"overrides `_set()` internally.\n"
-"settings.set_setting(\"some/property\",value)\n"
-"\n"
-"# `settings.get(\"some/property\", value)` also works as this class "
-"overrides `_get()` internally.\n"
-"settings.get_setting(\"some/property\")\n"
-"\n"
-"var list_of_settings = settings.get_property_list()\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
-"the singleton using [method EditorInterface.get_editor_settings]."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Adds a custom property info to a property. The dictionary must contain:\n"
-"- [code]name[/code]: [String] (the name of the property)\n"
-"- [code]type[/code]: [int] (see [enum Variant.Type])\n"
-"- optionally [code]hint[/code]: [int] (see [enum PropertyHint]) and "
-"[code]hint_string[/code]: [String]\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"editor_settings.set(\"category/property_name\", 0)\n"
-"\n"
-"var property_info = {\n"
-"    \"name\": \"category/property_name\",\n"
-"    \"type\": TYPE_INT,\n"
-"    \"hint\": PROPERTY_HINT_ENUM,\n"
-"    \"hint_string\": \"one,two,three\"\n"
-"}\n"
-"\n"
-"editor_settings.add_property_info(property_info)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid "Erases the setting whose name is specified by [code]property[/code]."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid "Returns the list of favorite files and directories for this project."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns project-specific metadata for the [code]section[/code] and "
-"[code]key[/code] specified. If the metadata doesn't exist, [code]default[/"
-"code] will be returned instead. See also [method set_project_metadata]."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns the project-specific settings path. Projects all have a unique "
-"subdirectory inside the settings path where project-specific settings are "
-"saved."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns the list of recently visited folders in the file dialog for this "
-"project."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns the value of the setting specified by [code]name[/code]. This is "
-"equivalent to using [method Object.get] on the EditorSettings instance."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Gets the global settings path for the engine. Inside this path, you can find "
-"some standard paths such as:\n"
-"[code]settings/tmp[/code] - Used for temporary storage of files\n"
-"[code]settings/templates[/code] - Where export templates are located"
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns [code]true[/code] if the setting specified by [code]name[/code] "
-"exists, [code]false[/code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns [code]true[/code] if the setting specified by [code]name[/code] can "
-"have its value reverted to the default value, [code]false[/code] otherwise. "
-"When this method returns [code]true[/code], a Revert button will display "
-"next to the setting in the Editor Settings."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Returns the default value of the setting specified by [code]name[/code]. "
-"This is the value that would be applied when clicking the Revert button in "
-"the Editor Settings."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid "Sets the list of favorite files and directories for this project."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Sets the initial value of the setting specified by [code]name[/code] to "
-"[code]value[/code]. This is used to provide a value for the Revert button in "
-"the Editor Settings. If [code]update_current[/code] is true, the current "
-"value of the setting will be set to [code]value[/code] as well."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Sets project-specific metadata with the [code]section[/code], [code]key[/"
-"code] and [code]data[/code] specified. This metadata is stored outside the "
-"project folder and therefore won't be checked into version control. See also "
-"[method get_project_metadata]."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Sets the list of recently visited folders in the file dialog for this "
-"project."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Sets the [code]value[/code] of the setting specified by [code]name[/code]. "
-"This is equivalent to using [method Object.set] on the EditorSettings "
-"instance."
-msgstr ""
-
-#: doc/classes/EditorSettings.xml
-msgid "Emitted after any editor setting has changed."
-msgstr "Gesendet wenn das Rechteck Element geändert wurde."
-
-#: doc/classes/EditorSettings.xml
-msgid ""
-"Emitted after any editor setting has changed. It's used by various editor "
-"plugins to update their visuals on theme changes or logic on configuration "
-"changes."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid "Custom gizmo for editing Spatial objects."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Custom gizmo that is used for providing custom visualization and editing "
-"(handles) for 3D Spatial objects. See [EditorSpatialGizmoPlugin] for more "
-"information."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Adds the specified [code]segments[/code] to the gizmo's collision shape for "
-"picking. Call this function during [method redraw]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Adds collision triangles to the gizmo for picking. A [TriangleMesh] can be "
-"generated from a regular [Mesh] too. Call this function during [method "
-"redraw]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Adds a list of handles (points) which can be used to deform the object being "
-"edited.\n"
-"There are virtual functions which will be called upon editing of these "
-"handles. Call this function during [method redraw]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Adds lines to the gizmo (as sets of 2 points), with a given material. The "
-"lines are used for visualizing the gizmo. Call this function during [method "
-"redraw]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Adds a mesh to the gizmo with the specified [code]billboard[/code] state, "
-"[code]skeleton[/code] and [code]material[/code]. If [code]billboard[/code] "
-"is [code]true[/code], the mesh will rotate to always face the camera. Call "
-"this function during [method redraw]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Adds an unscaled billboard for visualization. Call this function during "
-"[method redraw]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Removes everything in the gizmo including meshes, collisions and handles."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Commit a handle being edited (handles must have been previously added by "
-"[method add_handles]).\n"
-"If the [code]cancel[/code] parameter is [code]true[/code], an option to "
-"restore the edited value to the original is provided."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Gets the name of an edited handle (handles must have been previously added "
-"by [method add_handles]).\n"
-"Handles can be named for reference to the user when editing."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Gets actual value of a handle. This value can be anything and used for "
-"eventually undoing the motion when calling [method commit_handle]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Returns the [EditorSpatialGizmoPlugin] that owns this gizmo. It's useful to "
-"retrieve materials using [method EditorSpatialGizmoPlugin.get_material]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-#, fuzzy
-msgid "Returns the Spatial node associated with this gizmo."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Returns [code]true[/code] if the handle at index [code]index[/code] is "
-"highlighted by being hovered with the mouse."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn dieser Bereich vollendet ist, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"This function is called when the [Spatial] this gizmo refers to changes (the "
-"[method Spatial.update_gizmo] is called)."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"This function is used when the user drags a gizmo handle (previously added "
-"with [method add_handles]) in screen coordinates.\n"
-"The [Camera] is also provided so screen coordinates can be converted to "
-"raycasts."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Sets the gizmo's hidden state. If [code]true[/code], the gizmo will be "
-"hidden. If [code]false[/code], it will be shown."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmo.xml
-msgid ""
-"Sets the reference [Spatial] node for the gizmo. [code]node[/code] must "
-"inherit from [Spatial]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid "Used by the editor to define Spatial gizmo types."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"[EditorSpatialGizmoPlugin] allows you to define a new type of Gizmo. There "
-"are two main ways to do so: extending [EditorSpatialGizmoPlugin] for the "
-"simpler gizmos, or creating a new [EditorSpatialGizmo] type. See the "
-"tutorial in the documentation for more info.\n"
-"To use [EditorSpatialGizmoPlugin], register it using the [method "
-"EditorPlugin.add_spatial_gizmo_plugin] method first."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Adds a new material to the internal material list for the plugin. It can "
-"then be accessed with [method get_material]. Should not be overridden."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to define whether the gizmo can be hidden or not. "
-"Returns [code]true[/code] if not overridden."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to commit gizmo handles. Called for this plugin's "
-"active gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to return a custom [EditorSpatialGizmo] for the spatial "
-"nodes of your choice, return [code]null[/code] for the rest of nodes. See "
-"also [method has_gizmo]."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Creates a handle material with its variants (selected and/or editable) and "
-"adds them to the internal material list. They can then be accessed with "
-"[method get_material] and used in [method EditorSpatialGizmo.add_handles]. "
-"Should not be overridden.\n"
-"You can optionally provide a texture to use instead of the default icon."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Creates an icon material with its variants (selected and/or editable) and "
-"adds them to the internal material list. They can then be accessed with "
-"[method get_material] and used in [method EditorSpatialGizmo."
-"add_unscaled_billboard]. Should not be overridden."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Creates an unshaded material with its variants (selected and/or editable) "
-"and adds them to the internal material list. They can then be accessed with "
-"[method get_material] and used in [method EditorSpatialGizmo.add_mesh] and "
-"[method EditorSpatialGizmo.add_lines]. Should not be overridden."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to provide gizmo's handle names. Called for this "
-"plugin's active gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Gets actual value of a handle from gizmo. Called for this plugin's active "
-"gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Gets material from the internal list of materials. If an "
-"[EditorSpatialGizmo] is provided, it will try to get the corresponding "
-"variant (selected and/or editable)."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to provide the name that will appear in the gizmo "
-"visibility menu."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to set the gizmo's priority. Higher values correspond "
-"to higher priority. If a gizmo with higher priority conflicts with another "
-"gizmo, only the gizmo with higher priority will be used.\n"
-"All built-in editor gizmos return a priority of [code]-1[/code]. If not "
-"overridden, this method will return [code]0[/code], which means custom "
-"gizmos will automatically override built-in gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to define which Spatial nodes have a gizmo from this "
-"plugin. Whenever a [Spatial] node is added to a scene this method is called, "
-"if it returns [code]true[/code] the node gets a generic [EditorSpatialGizmo] "
-"assigned and is added to this plugin's list of active gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Gets whether a handle is highlighted or not. Called for this plugin's active "
-"gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Override this method to define whether a Spatial with this gizmo should be "
-"selectable even when the gizmo is hidden."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Callback to redraw the provided gizmo. Called for this plugin's active "
-"gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpatialGizmoPlugin.xml
-msgid ""
-"Update the value of a handle after it has been updated. Called for this "
-"plugin's active gizmos."
-msgstr ""
-
-#: doc/classes/EditorSpinSlider.xml
-msgid "Godot editor's control for editing numeric values."
-msgstr ""
-
-#: doc/classes/EditorSpinSlider.xml
-msgid ""
-"This [Control] node is used in the editor's Inspector dock to allow editing "
-"of numeric values. Can be used with [EditorInspectorPlugin] to recreate the "
-"same behavior."
-msgstr ""
-
-#: doc/classes/EditorSpinSlider.xml
-#, fuzzy
-msgid "If [code]true[/code], the slider is hidden."
-msgstr "Falls [code]wahr[/code] wir Audio gerade abgespielt."
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Version Control System (VCS) interface, which reads and writes to the local "
-"VCS in use."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Defines the API that the editor uses to extract information from the "
-"underlying VCS. The implementation of this API is included in VCS plugins, "
-"which are scripts that inherit [EditorVCSInterface] and are attached (on "
-"demand) to the singleton instance of [EditorVCSInterface]. Instead of "
-"performing the task themselves, all the virtual functions listed below are "
-"calling the internally overridden functions in the VCS plugins to provide a "
-"plug-n-play experience. A custom VCS plugin is supposed to inherit from "
-"[EditorVCSInterface] and override these virtual functions."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "Checks out a [code]branch_name[/code] in the VCS."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Commits the currently staged changes and applies the commit [code]msg[/code] "
-"to the resulting commit."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "Creates a new branch named [code]branch_name[/code] in the VCS."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Creates a new remote destination with name [code]remote_name[/code] and "
-"points it to [code]remote_url[/code]. This can be both an HTTPS remote or an "
-"SSH remote."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "Discards the changes made in file present at [code]file_path[/code]."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Fetches new changes from the remote, but doesn't write changes to the "
-"current working directory. Equivalent to [code]git fetch[/code]."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Gets an instance of an [Array] of [String]s containing available branch "
-"names in the VCS."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-#, fuzzy
-msgid "Gets the current branch name defined in the VCS."
-msgstr "Legt den aktuell sichtbaren Rahmen der Textur fest."
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Returns an [Array] of [Dictionary] items (see [method create_diff_file], "
-"[method create_diff_hunk], [method create_diff_line], [method "
-"add_line_diffs_into_diff_hunk] and [method add_diff_hunks_into_diff_file]), "
-"each containing information about a diff. If [code]identifier[/code] is a "
-"file path, returns a file diff, and if it is a commit identifier, then "
-"returns a commit diff."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Returns an [Array] of [Dictionary] items (see [method create_diff_hunk]), "
-"each containing a line diff between a file at [code]file_path[/code] and the "
-"[code]text[/code] which is passed in."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Returns an [Array] of [Dictionary] items (see [method create_status_file]), "
-"each containing the status data of every modified file in the project folder."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Returns an [Array] of [Dictionary] items (see [method create_commit]), each "
-"containing the data for a past commit."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Returns an [Array] of [String]s, each containing the name of a remote "
-"configured in the VCS."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-#, fuzzy
-msgid "Returns the name of the underlying VCS provider."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Initializes the VCS plugin when called from the editor. Returns whether or "
-"not the plugin was successfully initialized. A VCS project is initialized at "
-"[code]project_path[/code]."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "Pulls changes from the remote. This can give rise to merge conflicts."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Pushes changes to the [code]remote[/code]. Optionally, if [code]force[/code] "
-"is set to true, a force push will override the change history already "
-"present on the remote."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "Remove a branch from the local VCS."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-#, fuzzy
-msgid "Remove a remote from the local VCS."
-msgstr "Entfernt das Element der Arrays dessen Position übergeben wurde."
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Set user credentials in the underlying VCS. [code]username[/code] and "
-"[code]password[/code] are used only during HTTPS authentication unless not "
-"already mentioned in the remote URL. [code]ssh_public_key_path[/code], "
-"[code]ssh_private_key_path[/code], and [code]ssh_passphrase[/code] are only "
-"used during SSH authentication."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Shuts down VCS plugin instance. Called when the user either closes the "
-"editor or shuts down the VCS plugin through the editor UI."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-#, fuzzy
-msgid "Stages the file present at [code]file_path[/code] to the staged area."
-msgstr ""
-"Entfernt den Punkt bei Index [code]Punkt[/code] aus dem Überblendungsbereich."
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Unstages the file present at [code]file_path[/code] from the staged area to "
-"the unstaged area."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to add an array of [code]diff_hunks[/code] into a "
-"[code]diff_file[/code]."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to add an array of [code]line_diffs[/code] into a "
-"[code]diff_hunk[/code]."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to create a commit [Dictionary] item. [code]msg[/code] is "
-"the commit message of the commit. [code]author[/code] is a single human-"
-"readable string containing all the author's details, e.g. the email and name "
-"configured in the VCS. [code]id[/code] is the identifier of the commit, in "
-"whichever format your VCS may provide an identifier to commits. "
-"[code]unix_timestamp[/code] is the UTC Unix timestamp of when the commit was "
-"created. [code]offset_minutes[/code] is the timezone offset in minutes, "
-"recorded from the system timezone where the commit was created."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to create a [code]Dictionary[/code] for storing old and new "
-"diff file paths."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to create a [code]Dictionary[/code] for storing diff hunk "
-"data. [code]old_start[/code] is the starting line number in old file. "
-"[code]new_start[/code] is the starting line number in new file. "
-"[code]old_lines[/code] is the number of lines in the old file. "
-"[code]new_lines[/code] is the number of lines in the new file."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to create a [code]Dictionary[/code] for storing a line diff. "
-"[code]new_line_no[/code] is the line number in the new file (can be "
-"[code]-1[/code] if the line is deleted). [code]old_line_no[/code] is the "
-"line number in the old file (can be [code]-1[/code] if the line is added). "
-"[code]content[/code] is the diff text. [code]status[/code] is a single "
-"character string which stores the line origin."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid ""
-"Helper function to create a [code]Dictionary[/code] used by editor to read "
-"the status of a file."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-#, fuzzy
-msgid "Pops up an error message in the edior."
-msgstr "Wird verwendet, um Eigenschaften im Editor zu gruppieren."
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "A new file has been added."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "An earlier added file has been modified."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "An earlier added file has been renamed."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "An earlier added file has been deleted."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "An earlier added file has been typechanged."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "A file is left unmerged."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "A commit is encountered from the commit area."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "A file is encountered from the staged area."
-msgstr ""
-
-#: doc/classes/EditorVCSInterface.xml
-msgid "A file is encountered from the unstaged area."
-msgstr ""
-
-#: doc/classes/EncodedObjectAsID.xml
-msgid "Holds a reference to an [Object]'s instance ID."
-msgstr ""
-
-#: doc/classes/EncodedObjectAsID.xml
-msgid ""
-"Utility class which holds a reference to the internal identifier of an "
-"[Object] instance, as given by [method Object.get_instance_id]. This ID can "
-"then be used to retrieve the object instance with [method @GDScript."
-"instance_from_id].\n"
-"This class is used internally by the editor inspector and script debugger, "
-"but can also be used in plugins to pass and display objects as their IDs."
-msgstr ""
-
-#: doc/classes/EncodedObjectAsID.xml
-msgid ""
-"The [Object] identifier stored in this [EncodedObjectAsID] instance. The "
-"object instance can be retrieved with [method @GDScript.instance_from_id]."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid "Access to engine properties."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"The [Engine] singleton allows you to query and modify the project's run-time "
-"parameters, such as frames per second, time scale, and others."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns engine author information in a Dictionary.\n"
-"[code]lead_developers[/code]    - Array of Strings, lead developer names\n"
-"[code]founders[/code]           - Array of Strings, founder names\n"
-"[code]project_managers[/code]   - Array of Strings, project manager names\n"
-"[code]developers[/code]         - Array of Strings, developer names"
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns an Array of copyright information Dictionaries.\n"
-"[code]name[/code]    - String, component name\n"
-"[code]parts[/code]   - Array of Dictionaries {[code]files[/code], "
-"[code]copyright[/code], [code]license[/code]} describing subsections of the "
-"component"
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns a Dictionary of Arrays of donor names.\n"
-"{[code]platinum_sponsors[/code], [code]gold_sponsors[/code], "
-"[code]silver_sponsors[/code], [code]bronze_sponsors[/code], "
-"[code]mini_sponsors[/code], [code]gold_donors[/code], [code]silver_donors[/"
-"code], [code]bronze_donors[/code]}"
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns the total number of frames drawn. On headless platforms, or if the "
-"render loop is disabled with [code]--disable-render-loop[/code] via command "
-"line, [method get_frames_drawn] always returns [code]0[/code]. See [method "
-"get_idle_frames]."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid "Returns the frames per second of the running game."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns the total number of frames passed since engine initialization which "
-"is advanced on each [b]idle frame[/b], regardless of whether the render loop "
-"is enabled. See also [method get_frames_drawn] and [method "
-"get_physics_frames].\n"
-"[method get_idle_frames] can be used to run expensive logic less often "
-"without relying on a [Timer]:\n"
-"[codeblock]\n"
-"func _process(_delta):\n"
-"    if Engine.get_idle_frames() % 2 == 0:\n"
-"        pass  # Run expensive logic only once every 2 idle (render) frames "
-"here.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns Dictionary of licenses used by Godot and included third party "
-"components."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid "Returns Godot license text."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid "Returns the main loop object (see [MainLoop] and [SceneTree])."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns the total number of frames passed since engine initialization which "
-"is advanced on each [b]physics frame[/b]. See also [method "
-"get_idle_frames].\n"
-"[method get_physics_frames] can be used to run expensive logic less often "
-"without relying on a [Timer]:\n"
-"[codeblock]\n"
-"func _physics_process(_delta):\n"
-"    if Engine.get_physics_frames() % 2 == 0:\n"
-"        pass  # Run expensive logic only once every 2 physics frames here.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns the fraction through the current physics tick we are at the time of "
-"rendering the frame. This can be used to implement fixed timestep "
-"interpolation."
-msgstr ""
-
-#: doc/classes/Engine.xml
-#, fuzzy
-msgid ""
-"Returns a global singleton with given [code]name[/code]. Often used for "
-"plugins, e.g. [code]GodotPayment[/code] on Android."
-msgstr ""
-"Gibt eine Konstante aus dem aktivien [Design] mit dem gegebenen Namen "
-"([code]name[/code]) und dem zugehörigen [Control] des Types [code]type[/"
-"code] zurück."
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns the current engine version information in a Dictionary.\n"
-"[code]major[/code]    - Holds the major version number as an int\n"
-"[code]minor[/code]    - Holds the minor version number as an int\n"
-"[code]patch[/code]    - Holds the patch version number as an int\n"
-"[code]hex[/code]      - Holds the full version number encoded as a "
-"hexadecimal int with one byte (2 places) per number (see example below)\n"
-"[code]status[/code]   - Holds the status (e.g. \"beta\", \"rc1\", "
-"\"rc2\", ... \"stable\") as a String\n"
-"[code]build[/code]    - Holds the build name (e.g. \"custom_build\") as a "
-"String\n"
-"[code]hash[/code]     - Holds the full Git commit hash as a String\n"
-"[code]year[/code]     - Holds the year the version was released in as an "
-"int\n"
-"[code]string[/code]   - [code]major[/code] + [code]minor[/code] + "
-"[code]patch[/code] + [code]status[/code] + [code]build[/code] in a single "
-"String\n"
-"The [code]hex[/code] value is encoded as follows, from left to right: one "
-"byte for the major, one byte for the minor, one byte for the patch version. "
-"For example, \"3.1.12\" would be [code]0x03010C[/code]. [b]Note:[/b] It's "
-"still an int internally, and printing it will give you its decimal "
-"representation, which is not particularly meaningful. Use hexadecimal "
-"literals for easy version comparisons from code:\n"
-"[codeblock]\n"
-"if Engine.get_version_info().hex >= 0x030200:\n"
-"    # Do things specific to version 3.2 or later\n"
-"else:\n"
-"    # Do things specific to versions before 3.2\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns [code]true[/code] if a singleton with given [code]name[/code] exists "
-"in global scope."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Returns [code]true[/code] if the game is inside the fixed process and "
-"physics phase of the game loop."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"If [code]true[/code], the script is currently running inside the editor. "
-"This is useful for [code]tool[/code] scripts to conditionally draw editor "
-"helpers, or prevent accidentally running \"game\" code that would affect the "
-"scene state while in the editor:\n"
-"[codeblock]\n"
-"if Engine.editor_hint:\n"
-"    draw_gizmos()\n"
-"else:\n"
-"    simulate_physics()\n"
-"[/codeblock]\n"
-"See [url=$DOCS_URL/tutorials/plugins/running_code_in_the_editor.html]Running "
-"code in the editor[/url] in the documentation for more information.\n"
-"[b]Note:[/b] To detect whether the script is run from an editor [i]build[/i] "
-"(e.g. when pressing [code]F5[/code]), use [method OS.has_feature] with the "
-"[code]\"editor\"[/code] argument instead. [code]OS.has_feature(\"editor\")[/"
-"code] will evaluate to [code]true[/code] both when the code is running in "
-"the editor and when running the project from the editor, but it will "
-"evaluate to [code]false[/code] when the code is run from an exported project."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"The number of fixed iterations per second. This controls how often physics "
-"simulation and [method Node._physics_process] methods are run. This value "
-"should generally always be set to [code]60[/code] or above, as Godot doesn't "
-"interpolate the physics step. As a result, values lower than [code]60[/code] "
-"will look stuttery. This value can be increased to make input more reactive "
-"or work around collision tunneling issues, but keep in mind doing so will "
-"increase CPU usage. See also [member target_fps] and [member ProjectSettings."
-"physics/common/physics_fps].\n"
-"[b]Note:[/b] Only 8 physics ticks may be simulated per rendered frame at "
-"most. If more than 8 physics ticks have to be simulated per rendered frame "
-"to keep up with rendering, the game will appear to slow down (even if "
-"[code]delta[/code] is used consistently in physics calculations). Therefore, "
-"it is recommended not to increase [member Engine.iterations_per_second] "
-"above 240. Otherwise, the game will slow down when the rendering framerate "
-"goes below 30 FPS."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Controls how much physics ticks are synchronized with real time. For 0 or "
-"less, the ticks are synchronized. Such values are recommended for network "
-"games, where clock synchronization matters. Higher values cause higher "
-"deviation of the in-game clock and real clock but smooth out framerate "
-"jitters. The default value of 0.5 should be fine for most; values above 2 "
-"could cause the game to react to dropped frames with a noticeable delay and "
-"are not recommended.\n"
-"[b]Note:[/b] For best results, when using a custom physics interpolation "
-"solution, the physics jitter fix should be disabled by setting [member "
-"physics_jitter_fix] to [code]0[/code]."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"If [code]false[/code], stops printing error and warning messages to the "
-"console and editor Output log. This can be used to hide error and warning "
-"messages during unit test suite runs. This property is equivalent to the "
-"[member ProjectSettings.application/run/disable_stderr] project setting.\n"
-"[b]Warning:[/b] If you set this to [code]false[/code] anywhere in the "
-"project, important error messages may be hidden even if they are emitted "
-"from other scripts. If this is set to [code]false[/code] in a [code]tool[/"
-"code] script, this will also impact the editor itself. Do [i]not[/i] report "
-"bugs before ensuring error messages are enabled (as they are by default).\n"
-"[b]Note:[/b] This property does not impact the editor's Errors tab when "
-"running a project from the editor."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"The desired frames per second. If the hardware cannot keep up, this setting "
-"may not be respected. A value of 0 means no limit."
-msgstr ""
-
-#: doc/classes/Engine.xml
-msgid ""
-"Controls how fast or slow the in-game clock ticks versus the real life one. "
-"It defaults to 1.0. A value of 2.0 means the game moves twice as fast as "
-"real life, whilst a value of 0.5 means the game moves at half the regular "
-"speed."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Resource for environment nodes (like [WorldEnvironment]) that define "
-"multiple rendering options."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Resource for environment nodes (like [WorldEnvironment]) that define "
-"multiple environment operations (such as background [Sky] or [Color], "
-"ambient light, fog, depth-of-field...). These parameters affect the final "
-"render of the scene. The order of these operations is:\n"
-"- Depth of Field Blur\n"
-"- Glow\n"
-"- Tonemap (Auto Exposure)\n"
-"- Adjustments\n"
-"If the target [Viewport] is set to \"2D Without Sampling\", all post-"
-"processing effects will be unavailable. With \"3D Without Effects\", the "
-"following options will be unavailable:\n"
-"- Ssao\n"
-"- Ss Reflections\n"
-"This can be configured for the root Viewport with [member ProjectSettings."
-"rendering/quality/intended_usage/framebuffer_allocation], or for specific "
-"Viewports via the [member Viewport.usage] property.\n"
-"Note that [member ProjectSettings.rendering/quality/intended_usage/"
-"framebuffer_allocation] has a mobile platform override to use \"3D Without "
-"Effects\" by default. It improves the performance on mobile devices, but at "
-"the same time affects the screen display on mobile devices."
-msgstr ""
-
-#: doc/classes/Environment.xml doc/classes/WorldEnvironment.xml
-#, fuzzy
-msgid "Environment and post-processing"
-msgstr ""
-"https://docs.godotengine.org/de/latest/tutorials/3d/"
-"environment_and_post_processing.html"
-
-#: doc/classes/Environment.xml
-msgid "Light transport in game engines"
-msgstr ""
-
-#: doc/classes/Environment.xml doc/classes/Material.xml doc/classes/Mesh.xml
-#: doc/classes/MeshInstance.xml doc/classes/WorldEnvironment.xml
-msgid "3D Material Testers Demo"
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Returns [code]true[/code] if the glow level [code]idx[/code] is specified, "
-"[code]false[/code] otherwise."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Enables or disables the glow level at index [code]idx[/code]. Each level "
-"relies on the previous level. This means that enabling higher glow levels "
-"will slow down the glow effect rendering, even if previous levels aren't "
-"enabled."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The global brightness value of the rendered scene. Effective only if "
-"[code]adjustment_enabled[/code] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Applies the provided [Texture] resource to affect the global color aspect of "
-"the rendered scene. Effective only if [code]adjustment_enabled[/code] is "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The global contrast value of the rendered scene (default value is 1). "
-"Effective only if [code]adjustment_enabled[/code] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], enables the [code]adjustment_*[/code] properties "
-"provided by this resource. If [code]false[/code], modifications to the "
-"[code]adjustment_*[/code] properties will have no effect on the rendered "
-"scene."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The global color saturation value of the rendered scene (default value is "
-"1). Effective only if [code]adjustment_enabled[/code] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The ambient light's [Color]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The ambient light's energy. The higher the value, the stronger the light."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Defines the amount of light that the sky brings on the scene. A value of "
-"[code]0.0[/code] means that the sky's light emission has no effect on the "
-"scene illumination, thus all ambient illumination is provided by the ambient "
-"light. On the contrary, a value of [code]1.0[/code] means that [i]all[/i] "
-"the light that affects the scene is provided by the sky, thus the ambient "
-"light parameter has no effect on the scene.\n"
-"[b]Note:[/b] [member ambient_light_sky_contribution] is internally clamped "
-"between [code]0.0[/code] and [code]1.0[/code] (inclusive)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], enables the tonemapping auto exposure mode of the "
-"scene renderer. If [code]true[/code], the renderer will automatically "
-"determine the exposure setting to adapt to the scene's illumination and the "
-"observed light."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The maximum luminance value for the auto exposure."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The minimum luminance value for the auto exposure."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The scale of the auto exposure effect. Affects the intensity of auto "
-"exposure."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The speed of the auto exposure effect. Affects the time needed for the "
-"camera to perform auto exposure."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The ID of the camera feed to show in the background."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The maximum layer ID to display. Only effective when using the [constant "
-"BG_CANVAS] background mode."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The [Color] displayed for clear areas of the scene. Only effective when "
-"using the [constant BG_COLOR] or [constant BG_COLOR_SKY] background modes)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The power of the light emitted by the background."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The background mode. See [enum BGMode] for possible values."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The [Sky] resource defined as background."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The [Sky] resource's custom field of view."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The [Sky] resource's rotation expressed as a [Basis]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The [Sky] resource's rotation expressed as Euler angles in radians."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The [Sky] resource's rotation expressed as Euler angles in degrees."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The amount of far blur for the depth-of-field effect."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The distance from the camera where the far blur effect affects the rendering."
-msgstr ""
-
-#: doc/classes/Environment.xml
-#, fuzzy
-msgid "If [code]true[/code], enables the depth-of-field far blur effect."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/Environment.xml
-msgid ""
-"The depth-of-field far blur's quality. Higher values can mitigate the "
-"visible banding effect seen at higher strengths, but are much slower."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The length of the transition between the no-blur area and far blur."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The amount of near blur for the depth-of-field effect."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Distance from the camera where the near blur effect affects the rendering."
-msgstr ""
-
-#: doc/classes/Environment.xml
-#, fuzzy
-msgid "If [code]true[/code], enables the depth-of-field near blur effect."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/Environment.xml
-msgid ""
-"The depth-of-field near blur's quality. Higher values can mitigate the "
-"visible banding effect seen at higher strengths, but are much slower."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The length of the transition between the near blur and no-blur area."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The fog's [Color]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The fog's depth starting distance from the camera."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The fog depth's intensity curve. A number of presets are available in the "
-"[b]Inspector[/b] by right-clicking the curve."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], the depth fog effect is enabled. When enabled, fog "
-"will appear in the distance (relative to the camera)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The fog's depth end distance from the camera. If this value is set to 0, it "
-"will be equal to the current camera's [member Camera.far] value."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], fog effects are enabled. [member fog_height_enabled] "
-"and/or [member fog_depth_enabled] must be set to [code]true[/code] to "
-"actually display fog."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The height fog's intensity. A number of presets are available in the "
-"[b]Inspector[/b] by right-clicking the curve."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], the height fog effect is enabled. When enabled, fog "
-"will appear in a defined height range, regardless of the distance from the "
-"camera. This can be used to simulate \"deep water\" effects with a lower "
-"performance cost compared to a dedicated shader."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The Y coordinate where the height fog will be the most intense. If this "
-"value is greater than [member fog_height_min], fog will be displayed from "
-"bottom to top. Otherwise, it will be displayed from top to bottom."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The Y coordinate where the height fog will be the least intense. If this "
-"value is greater than [member fog_height_max], fog will be displayed from "
-"top to bottom. Otherwise, it will be displayed from bottom to top."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The intensity of the depth fog color transition when looking towards the "
-"sun. The sun's direction is determined automatically using the "
-"DirectionalLight node in the scene."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The depth fog's [Color] when looking towards the sun."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The intensity of the fog light transmittance effect. Amount of light that "
-"the fog transmits."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Enables fog's light transmission effect. If [code]true[/code], light will be "
-"more visible in the fog to simulate light scattering as in real life."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Smooths out the blockiness created by sampling higher levels, at the cost of "
-"performance.\n"
-"[b]Note:[/b] When using the GLES2 renderer, this is only available if the "
-"GPU supports the [code]GL_EXT_gpu_shader4[/code] extension."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The glow blending mode."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The bloom's intensity. If set to a value higher than [code]0[/code], this "
-"will make glow visible in areas darker than the [member glow_hdr_threshold]."
-msgstr ""
-"Die Intensität des Bloom-Effekts. Wenn höher eingestellt als [code]0[/code], "
-"macht es den Glow sichtbar in dunklen Bereichen, die den [member "
-"glow_hdr_threshold]-Wert unterschreiten."
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], the glow effect is enabled.\n"
-"[b]Note:[/b] Only effective if [member ProjectSettings.rendering/quality/"
-"intended_usage/framebuffer_allocation] is [b]3D[/b] ([i]not[/i] [b]3D "
-"Without Effects[/b]). On mobile, [member ProjectSettings.rendering/quality/"
-"intended_usage/framebuffer_allocation] defaults to [b]3D Without Effects[/b] "
-"by default, so its [code].mobile[/code] override needs to be changed to "
-"[b]3D[/b].\n"
-"[b]Note:[/b] When using GLES3 on mobile, HDR rendering is disabled by "
-"default for performance reasons. This means glow will only be visible if "
-"[member glow_hdr_threshold] is decreased below [code]1.0[/code] or if "
-"[member glow_bloom] is increased above [code]0.0[/code]. Also consider "
-"increasing [member glow_intensity] to [code]1.5[/code]. If you want glow to "
-"behave on mobile like it does on desktop (at a performance cost), enable "
-"[member ProjectSettings.rendering/quality/depth/hdr]'s [code].mobile[/code] "
-"override."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The higher threshold of the HDR glow. Areas brighter than this threshold "
-"will be clamped for the purposes of the glow effect."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The bleed scale of the HDR glow."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The lower threshold of the HDR glow. When using the GLES2 renderer (which "
-"doesn't support HDR), this needs to be below [code]1.0[/code] for glow to be "
-"visible. A value of [code]0.9[/code] works well in this case."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Takes more samples during downsample pass of glow. This ensures that single "
-"pixels are captured by glow which makes the glow look smoother and more "
-"stable during movement. However, it is very expensive and makes the glow "
-"post process take twice as long."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The glow intensity. When using the GLES2 renderer, this should be increased "
-"to 1.5 to compensate for the lack of HDR rendering."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], the 1st level of glow is enabled. This is the most "
-"\"local\" level (least blurry)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "If [code]true[/code], the 2th level of glow is enabled."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "If [code]true[/code], the 3th level of glow is enabled."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "If [code]true[/code], the 4th level of glow is enabled."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "If [code]true[/code], the 5th level of glow is enabled."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "If [code]true[/code], the 6th level of glow is enabled."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], the 7th level of glow is enabled. This is the most "
-"\"global\" level (blurriest)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The glow strength. When using the GLES2 renderer, this should be increased "
-"to 1.3 to compensate for the lack of HDR rendering."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The depth tolerance for screen-space reflections."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], screen-space reflections are enabled. Screen-space "
-"reflections are more accurate than reflections from [GIProbe]s or "
-"[ReflectionProbe]s, but are slower and can't reflect surfaces occluded by "
-"others."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The fade-in distance for screen-space reflections. Affects the area from the "
-"reflected material to the screen-space reflection)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The fade-out distance for screen-space reflections. Affects the area from "
-"the screen-space reflection to the \"global\" reflection."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The maximum number of steps for screen-space reflections. Higher values are "
-"slower."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], screen-space reflections will take the material "
-"roughness into account."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The screen-space ambient occlusion intensity on materials that have an AO "
-"texture defined. Values higher than [code]0[/code] will make the SSAO effect "
-"visible in areas darkened by AO textures."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The screen-space ambient occlusion bias. This should be kept high enough to "
-"prevent \"smooth\" curves from being affected by ambient occlusion."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The screen-space ambient occlusion blur quality. See [enum SSAOBlur] for "
-"possible values."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The screen-space ambient occlusion color."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The screen-space ambient occlusion edge sharpness."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"If [code]true[/code], the screen-space ambient occlusion effect is enabled. "
-"This darkens objects' corners and cavities to simulate ambient light not "
-"reaching the entire object as in real life. This works well for small, "
-"dynamic objects, but baked lighting or ambient occlusion textures will do a "
-"better job at displaying ambient occlusion on large static objects. This is "
-"a costly effect and should be disabled first when running into performance "
-"issues."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The primary screen-space ambient occlusion intensity. See also [member "
-"ssao_radius]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The secondary screen-space ambient occlusion intensity. See also [member "
-"ssao_radius2]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The screen-space ambient occlusion intensity in direct light. In real life, "
-"ambient occlusion only applies to indirect light, which means its effects "
-"can't be seen in direct light. Values higher than [code]0[/code] will make "
-"the SSAO effect visible in direct light."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The screen-space ambient occlusion quality. Higher qualities will make "
-"better use of small objects for ambient occlusion, but are slower."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The primary screen-space ambient occlusion radius."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The secondary screen-space ambient occlusion radius. If set to a value "
-"higher than [code]0[/code], enables the secondary screen-space ambient "
-"occlusion effect which can be used to improve the effect's appearance (at "
-"the cost of performance)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "The default exposure used for tonemapping."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The tonemapping mode to use. Tonemapping is the process that \"converts\" "
-"HDR values to be suitable for rendering on a SDR display. (Godot doesn't "
-"support rendering on HDR displays yet.)"
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"The white reference value for tonemapping. Only effective if the [member "
-"tonemap_mode] isn't set to [constant TONE_MAPPER_LINEAR]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Keeps on screen every pixel drawn in the background. Only select this mode "
-"if you really need to keep the old data. On modern GPUs it will generally "
-"not be faster than clearing the background, and can be significantly slower, "
-"particularly on mobile.\n"
-"It can only be safely used in fully-interior scenes (no visible sky or sky "
-"reflections). If enabled in a scene where the background is visible, \"ghost "
-"trail\" artifacts will be visible when moving the camera."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Clears the background using the clear color defined in [member "
-"ProjectSettings.rendering/environment/default_clear_color]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Clears the background using a custom clear color."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Displays a user-defined sky in the background."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Clears the background using a custom clear color and allows defining a sky "
-"for shading and reflection. This mode is slightly faster than [constant "
-"BG_SKY] and should be preferred in scenes where reflections can be visible, "
-"but the sky itself never is (e.g. top-down camera)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Displays a [CanvasLayer] in the background."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Displays a camera feed in the background."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Represents the size of the [enum BGMode] enum."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Additive glow blending mode. Mostly used for particles, glows (bloom), lens "
-"flare, bright sources."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Screen glow blending mode. Increases brightness, used frequently with bloom."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Soft light glow blending mode. Modifies contrast, exposes shadows and "
-"highlights (vivid bloom)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Replace glow blending mode. Replaces all pixels' color by the glow value. "
-"This can be used to simulate a full-screen blur effect by tweaking the glow "
-"parameters to match the original image's brightness."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Linear tonemapper operator. Reads the linear data and passes it on "
-"unmodified. This can cause bright lighting to look blown out, with "
-"noticeable clipping in the output colors."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Reinhardt tonemapper operator. Performs a variation on rendered pixels' "
-"colors by this formula: [code]color = color / (1 + color)[/code]. This "
-"avoids clipping bright highlights, but the resulting image can look a bit "
-"dull."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Filmic tonemapper operator. This avoids clipping bright highlights, with a "
-"resulting image that usually looks more vivid than [constant "
-"TONE_MAPPER_REINHARDT]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Use the legacy Godot version of the Academy Color Encoding System "
-"tonemapper. Unlike [constant TONE_MAPPER_ACES_FITTED], this version of ACES "
-"does not handle bright lighting in a physically accurate way. ACES typically "
-"has a more contrasted output compared to [constant TONE_MAPPER_REINHARDT] "
-"and [constant TONE_MAPPER_FILMIC].\n"
-"[b]Note:[/b] This tonemapping operator will be removed in Godot 4.0 in favor "
-"of the more accurate [constant TONE_MAPPER_ACES_FITTED]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid ""
-"Use the Academy Color Encoding System tonemapper. ACES is slightly more "
-"expensive than other options, but it handles bright lighting in a more "
-"realistic fashion by desaturating it as it becomes brighter. ACES typically "
-"has a more contrasted output compared to [constant TONE_MAPPER_REINHARDT] "
-"and [constant TONE_MAPPER_FILMIC]."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Low depth-of-field blur quality (fastest)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Medium depth-of-field blur quality."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "High depth-of-field blur quality (slowest)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "No blur for the screen-space ambient occlusion effect (fastest)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "1×1 blur for the screen-space ambient occlusion effect."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "2×2 blur for the screen-space ambient occlusion effect."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "3×3 blur for the screen-space ambient occlusion effect (slowest)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Low quality for the screen-space ambient occlusion effect (fastest)."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "Medium quality for the screen-space ambient occlusion effect."
-msgstr ""
-
-#: doc/classes/Environment.xml
-msgid "High quality for the screen-space ambient occlusion effect (slowest)."
-msgstr ""
-
-#: doc/classes/Expression.xml
-msgid "A class that stores an expression you can execute."
-msgstr ""
-
-#: doc/classes/Expression.xml
-msgid ""
-"An expression can be made of any arithmetic operation, built-in math "
-"function call, method call of a passed instance, or built-in type "
-"construction call.\n"
-"An example expression text using the built-in math functions could be "
-"[code]sqrt(pow(3,2) + pow(4,2))[/code].\n"
-"In the following example we use a [LineEdit] node to write our expression "
-"and show the result.\n"
-"[codeblock]\n"
-"onready var expression = Expression.new()\n"
-"\n"
-"func _ready():\n"
-"    $LineEdit.connect(\"text_entered\", self, \"_on_text_entered\")\n"
-"\n"
-"func _on_text_entered(command):\n"
-"    var error = expression.parse(command, [])\n"
-"    if error != OK:\n"
-"        print(expression.get_error_text())\n"
-"        return\n"
-"    var result = expression.execute([], null, true)\n"
-"    if not expression.has_execute_failed():\n"
-"        $LineEdit.text = str(result)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Expression.xml
-msgid ""
-"Executes the expression that was previously parsed by [method parse] and "
-"returns the result. Before you use the returned object, you should check if "
-"the method failed by calling [method has_execute_failed].\n"
-"If you defined input variables in [method parse], you can specify their "
-"values in the inputs array, in the same order."
-msgstr ""
-
-#: doc/classes/Expression.xml
-msgid "Returns the error text if [method parse] has failed."
-msgstr ""
-
-#: doc/classes/Expression.xml
-msgid "Returns [code]true[/code] if [method execute] has failed."
-msgstr ""
-
-#: doc/classes/Expression.xml
-msgid ""
-"Parses the expression and returns an [enum Error] code.\n"
-"You can optionally specify names of variables that may appear in the "
-"expression with [code]input_names[/code], so that you can bind them when it "
-"gets executed."
-msgstr ""
-
-#: doc/classes/ExternalTexture.xml
-msgid "Enable OpenGL ES external texture extension."
-msgstr ""
-
-#: doc/classes/ExternalTexture.xml
-msgid ""
-"Enable support for the OpenGL ES external texture extension as defined by "
-"[url=https://www.khronos.org/registry/OpenGL/extensions/OES/"
-"OES_EGL_image_external.txt]OES_EGL_image_external[/url].\n"
-"[b]Note:[/b] This is only supported for Android platforms."
-msgstr ""
-
-#: doc/classes/ExternalTexture.xml
-#, fuzzy
-msgid "Returns the external texture name."
-msgstr "Gibt den Tangens des Parameters zurück."
-
-#: doc/classes/ExternalTexture.xml
-msgid "External texture size."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Type to handle file reading and writing operations."
-msgstr "Typ um Datei Schreib- und Lesoperationen zu handhaben."
-
-#: doc/classes/File.xml
-msgid ""
-"File type. This is used to permanently store data into the user device's "
-"file system and to read from it. This can be used to store game save data or "
-"player configuration files, for example.\n"
-"Here's a sample on how to write and read from a file:\n"
-"[codeblock]\n"
-"func save(content):\n"
-"    var file = File.new()\n"
-"    file.open(\"user://save_game.dat\", File.WRITE)\n"
-"    file.store_string(content)\n"
-"    file.close()\n"
-"\n"
-"func load():\n"
-"    var file = File.new()\n"
-"    file.open(\"user://save_game.dat\", File.READ)\n"
-"    var content = file.get_as_text()\n"
-"    file.close()\n"
-"    return content\n"
-"[/codeblock]\n"
-"In the example above, the file will be saved in the user data folder as "
-"specified in the [url=$DOCS_URL/tutorials/io/data_paths.html]Data paths[/"
-"url] documentation.\n"
-"[b]Note:[/b] To access project resources once exported, it is recommended to "
-"use [ResourceLoader] instead of the [File] API, as some files are converted "
-"to engine-specific formats and their original source files might not be "
-"present in the exported PCK package.\n"
-"[b]Note:[/b] Files are automatically closed only if the process exits "
-"\"normally\" (such as by clicking the window manager's close button or "
-"pressing [b]Alt + F4[/b]). If you stop the project execution by pressing "
-"[b]F8[/b] while the project is running, the file won't be closed as the game "
-"process will be killed. You can work around this by calling [method flush] "
-"at regular intervals."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "File system"
-msgstr "Dateisystem"
-
-#: doc/classes/File.xml
-msgid ""
-"Closes the currently opened file and prevents subsequent read/write "
-"operations. Use [method flush] to persist the data to disk without closing "
-"the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns [code]true[/code] if the file cursor has already read past the end "
-"of the file.\n"
-"[b]Note:[/b] [code]eof_reached() == false[/code] cannot be used to check "
-"whether there is more data available. To loop while there is more data "
-"available, use:\n"
-"[codeblock]\n"
-"while file.get_position() < file.get_len():\n"
-"    # Read data\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns [code]true[/code] if the file exists in the given path.\n"
-"[b]Note:[/b] Many resources types are imported (e.g. textures or sound "
-"files), and their source asset will not be included in the exported game, as "
-"only the imported version is used. See [method ResourceLoader.exists] for an "
-"alternative approach that takes resource remapping into account."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Writes the file's buffer to disk. Flushing is automatically performed when "
-"the file is closed. This means you don't need to call [method flush] "
-"manually before closing a file using [method close]. Still, calling [method "
-"flush] can be used to ensure the data is safe even if the project crashes "
-"instead of being closed gracefully.\n"
-"[b]Note:[/b] Only call [method flush] when you actually need it. Otherwise, "
-"it will decrease performance due to constant disk writes."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next 16 bits from the file as an integer. See [method store_16] "
-"for details on what values can be stored and retrieved this way."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next 32 bits from the file as an integer. See [method store_32] "
-"for details on what values can be stored and retrieved this way."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next 64 bits from the file as an integer. See [method store_64] "
-"for details on what values can be stored and retrieved this way."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next 8 bits from the file as an integer. See [method store_8] "
-"for details on what values can be stored and retrieved this way."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the whole file as a [String]. Text is interpreted as being UTF-8 "
-"encoded.\n"
-"If [code]skip_cr[/code] is [code]true[/code], carriage return characters "
-"([code]\\r[/code], CR) will be ignored when parsing the UTF-8, so that only "
-"line feed characters ([code]\\n[/code], LF) represent a new line (Unix "
-"convention)."
-msgstr ""
-
-#: doc/classes/File.xml
-#, fuzzy
-msgid "Returns next [code]len[/code] bytes of the file as a [PoolByteArray]."
-msgstr "Liefert [code]true[/code] wenn das [Rect2i] einen Punkt beinhaltet."
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next value of the file in CSV (Comma-Separated Values) format. "
-"You can pass a different delimiter [code]delim[/code] to use other than the "
-"default [code]\",\"[/code] (comma). This delimiter must be one-character "
-"long, and cannot be a double quotation mark.\n"
-"Text is interpreted as being UTF-8 encoded. Text values must be enclosed in "
-"double quotes if they include the delimiter character. Double quotes within "
-"a text value can be escaped by doubling their occurrence.\n"
-"For example, the following CSV lines are valid and will be properly parsed "
-"as two strings each:\n"
-"[codeblock]\n"
-"Alice,\"Hello, Bob!\"\n"
-"Bob,Alice! What a surprise!\n"
-"Alice,\"I thought you'd reply with \"\"Hello, world\"\".\"\n"
-"[/codeblock]\n"
-"Note how the second line can omit the enclosing quotes as it does not "
-"include the delimiter. However it [i]could[/i] very well use quotes, it was "
-"only written without for demonstration purposes. The third line must use "
-"[code]\"\"[/code] for each quotation mark that needs to be interpreted as "
-"such instead of the end of a text value."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the next 64 bits from the file as a floating-point number."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the last error that happened when trying to perform operations. "
-"Compare with the [code]ERR_FILE_*[/code] constants from [enum Error]."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the next 32 bits from the file as a floating-point number."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the size of the file in bytes."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next line of the file as a [String].\n"
-"Text is interpreted as being UTF-8 encoded."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns an MD5 String representing the file at the given path or an empty "
-"[String] on failure."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the last time the [code]file[/code] was modified in unix timestamp "
-"format or returns a [String] \"ERROR IN [code]file[/code]\". This unix "
-"timestamp can be converted to datetime by using [method OS."
-"get_datetime_from_unix_time]."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns a [String] saved in Pascal format from the file.\n"
-"Text is interpreted as being UTF-8 encoded."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the path as a [String] for the current open file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the absolute path as a [String] for the current open file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the file cursor's position."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns the next bits from the file as a floating-point number."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns a SHA-256 [String] representing the file at the given path or an "
-"empty [String] on failure."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Returns the next [Variant] value from the file. If [code]allow_objects[/"
-"code] is [code]true[/code], decoding objects is allowed.\n"
-"[b]Warning:[/b] Deserialized objects can contain code which gets executed. "
-"Do not use this option if the serialized object comes from untrusted sources "
-"to avoid potential security threats such as remote code execution."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Returns [code]true[/code] if the file is currently opened."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Opens the file for writing or reading, depending on the flags."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens a compressed file for reading or writing.\n"
-"[b]Note:[/b] [method open_compressed] can only read files that were saved by "
-"Godot, not third-party compression formats. See [url=https://github.com/"
-"godotengine/godot/issues/28999]GitHub issue #28999[/url] for a workaround."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens an encrypted file in write or read mode. You need to pass a binary key "
-"to encrypt/decrypt it.\n"
-"[b]Note:[/b] The provided key must be 32 bytes long."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens an encrypted file in write or read mode. You need to pass a password "
-"to encrypt/decrypt it."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Changes the file reading/writing cursor to the specified position (in bytes "
-"from the beginning of the file)."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Changes the file reading/writing cursor to the specified position (in bytes "
-"from the end of the file).\n"
-"[b]Note:[/b] This is an offset, so you should use negative numbers or the "
-"cursor will be at the end of the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Stores an integer as 16 bits in the file.\n"
-"[b]Note:[/b] The [code]value[/code] should lie in the interval [code][0, "
-"2^16 - 1][/code]. Any other value will overflow and wrap around.\n"
-"To store a signed integer, use [method store_64] or store a signed integer "
-"from the interval [code][-2^15, 2^15 - 1][/code] (i.e. keeping one bit for "
-"the signedness) and compute its sign manually when reading. For example:\n"
-"[codeblock]\n"
-"const MAX_15B = 1 << 15\n"
-"const MAX_16B = 1 << 16\n"
-"\n"
-"func unsigned16_to_signed(unsigned):\n"
-"    return (unsigned + MAX_15B) % MAX_16B - MAX_15B\n"
-"\n"
-"func _ready():\n"
-"    var f = File.new()\n"
-"    f.open(\"user://file.dat\", File.WRITE_READ)\n"
-"    f.store_16(-42) # This wraps around and stores 65494 (2^16 - 42).\n"
-"    f.store_16(121) # In bounds, will store 121.\n"
-"    f.seek(0) # Go back to start to read the stored value.\n"
-"    var read1 = f.get_16() # 65494\n"
-"    var read2 = f.get_16() # 121\n"
-"    var converted1 = unsigned16_to_signed(read1) # -42\n"
-"    var converted2 = unsigned16_to_signed(read2) # 121\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Stores an integer as 32 bits in the file.\n"
-"[b]Note:[/b] The [code]value[/code] should lie in the interval [code][0, "
-"2^32 - 1][/code]. Any other value will overflow and wrap around.\n"
-"To store a signed integer, use [method store_64], or convert it manually "
-"(see [method store_16] for an example)."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Stores an integer as 64 bits in the file.\n"
-"[b]Note:[/b] The [code]value[/code] must lie in the interval [code][-2^63, "
-"2^63 - 1][/code] (i.e. be a valid [int] value)."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Stores an integer as 8 bits in the file.\n"
-"[b]Note:[/b] The [code]value[/code] should lie in the interval [code][0, 255]"
-"[/code]. Any other value will overflow and wrap around.\n"
-"To store a signed integer, use [method store_64], or convert it manually "
-"(see [method store_16] for an example)."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Stores the given array of bytes in the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Store the given [PoolStringArray] in the file as a line formatted in the CSV "
-"(Comma-Separated Values) format. You can pass a different delimiter "
-"[code]delim[/code] to use other than the default [code]\",\"[/code] (comma). "
-"This delimiter must be one-character long.\n"
-"Text will be encoded as UTF-8."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Stores a floating-point number as 64 bits in the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Stores a floating-point number as 32 bits in the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Appends [code]line[/code] to the file followed by a line return character "
-"([code]\\n[/code]), encoding the text as UTF-8."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Stores the given [String] as a line in the file in Pascal format (i.e. also "
-"store the length of the string).\n"
-"Text will be encoded as UTF-8."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Stores a floating-point number in the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Appends [code]string[/code] to the file without a line return, encoding the "
-"text as UTF-8.\n"
-"[b]Note:[/b] This method is intended to be used to write text files. The "
-"string is stored as a UTF-8 encoded buffer without string length or "
-"terminating zero, which means that it can't be loaded back easily. If you "
-"want to store a retrievable string in a binary file, consider using [method "
-"store_pascal_string] instead. For retrieving strings from a text file, you "
-"can use [code]get_buffer(length).get_string_from_utf8()[/code] (if you know "
-"the length) or [method get_as_text]."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Stores any Variant value in the file. If [code]full_objects[/code] is "
-"[code]true[/code], encoding objects is allowed (and can potentially include "
-"code).\n"
-"[b]Note:[/b] Not all properties are included. Only properties that are "
-"configured with the [constant PROPERTY_USAGE_STORAGE] flag set will be "
-"serialized. You can add a new usage flag to a property by overriding the "
-"[method Object._get_property_list] method in your class. You can also check "
-"how property usage is configured by calling [method Object."
-"_get_property_list]. See [enum PropertyUsageFlags] for the possible usage "
-"flags."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"If [code]true[/code], the file is read with big-endian [url=https://en."
-"wikipedia.org/wiki/Endianness]endianness[/url]. If [code]false[/code], the "
-"file is read with little-endian endianness. If in doubt, leave this to "
-"[code]false[/code] as most files are written with little-endian endianness.\n"
-"[b]Note:[/b] [member endian_swap] is only about the file format, not the CPU "
-"type. The CPU endianness doesn't affect the default endianness for files "
-"written.\n"
-"[b]Note:[/b] This is always reset to [code]false[/code] whenever you open "
-"the file. Therefore, you must set [member endian_swap] [i]after[/i] opening "
-"the file, not before."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens the file for read operations. The cursor is positioned at the "
-"beginning of the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens the file for write operations. The file is created if it does not "
-"exist, and truncated if it does."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens the file for read and write operations. Does not truncate the file. "
-"The cursor is positioned at the beginning of the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Opens the file for read and write operations. The file is created if it does "
-"not exist, and truncated if it does. The cursor is positioned at the "
-"beginning of the file."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid "Uses the [url=http://fastlz.org/]FastLZ[/url] compression method."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Uses the [url=https://en.wikipedia.org/wiki/DEFLATE]DEFLATE[/url] "
-"compression method."
-msgstr ""
-
-#: doc/classes/File.xml
-msgid ""
-"Uses the [url=https://facebook.github.io/zstd/]Zstandard[/url] compression "
-"method."
-msgstr ""
-"Verwendet das [url=https://facebook.github.io/zstd/]Zstandard[/url] "
-"Kompressionsverfahren."
-
-#: doc/classes/File.xml
-msgid "Uses the [url=https://www.gzip.org/]gzip[/url] compression method."
-msgstr ""
-"Verwendet das [url=https://www.gzip.org/]gzip[/url] Kompressionsverfahren."
-
-#: doc/classes/FileDialog.xml
-msgid "Dialog for selecting files or directories in the filesystem."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"FileDialog is a preset dialog used to choose files and directories in the "
-"filesystem. It supports filter masks. The FileDialog automatically sets its "
-"window title according to the [member mode]. If you want to use a custom "
-"title, disable this by setting [member mode_overrides_title] to [code]false[/"
-"code]."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"Adds [code]filter[/code] to the list of filters, which restricts what files "
-"can be picked.\n"
-"A [code]filter[/code] should be of the form [code]\"filename.extension ; "
-"Description\"[/code], where filename and extension can be [code]*[/code] to "
-"match any string. Filters starting with [code].[/code] (i.e. empty "
-"filenames) are not allowed.\n"
-"Example filters: [code]\"*.png ; PNG Images\"[/code], [code]\"project."
-"godot ; Godot Project\"[/code]."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Clear all the added filters in the dialog."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Clear currently selected items in the dialog."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"Returns the LineEdit for the selected file.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"Returns the vertical box container of the dialog, custom controls can be "
-"added to it.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Invalidate and update the current dialog content list."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The file system access scope. See enum [code]Access[/code] constants.\n"
-"[b]Warning:[/b] Currently, in sandboxed environments such as HTML5 builds or "
-"sandboxed macOS apps, FileDialog cannot access the host file system. See "
-"[url=https://github.com/godotengine/godot-proposals/issues/1123]godot-"
-"proposals#1123[/url]."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The current working directory of the file dialog."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The currently selected file of the file dialog."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The currently selected file path of the file dialog."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The available file type filters. For example, this shows only [code].png[/"
-"code] and [code].gd[/code] files: [code]set_filters(PoolStringArray([\"*."
-"png ; PNG Images\",\"*.gd ; GDScript Files\"]))[/code]. Multiple file types "
-"can also be specified in a single filter. [code]\"*.png, *.jpg, *.jpeg ; "
-"Supported Images\"[/code] will show both PNG and JPEG files when selected."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The dialog's open or save mode, which affects the selection behavior. See "
-"enum [code]Mode[/code] constants."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"If [code]true[/code], changing the [code]Mode[/code] property will set the "
-"window title accordingly (e.g. setting mode to [constant MODE_OPEN_FILE] "
-"will change the window title to \"Open a File\")."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "If [code]true[/code], the dialog will show hidden files."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Emitted when the user selects a directory."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"Emitted when the user selects a file by double-clicking it or pressing the "
-"[b]OK[/b] button."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Emitted when the user selects multiple files."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The dialog allows selecting one, and only one file."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The dialog allows selecting multiple files."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The dialog only allows selecting a directory, disallowing the selection of "
-"any file."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The dialog allows selecting one file or directory."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The dialog will warn when a file exists."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The dialog only allows accessing files under the [Resource] path "
-"([code]res://[/code])."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The dialog only allows accessing files under user data path ([code]user://[/"
-"code])."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The dialog allows accessing files on the whole file system."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The color modulation applied to the file icon."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid ""
-"The color tint for disabled files (when the [FileDialog] is used in open "
-"folder mode)."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "The color modulation applied to the folder icon."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Custom icon for files."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Custom icon for folders."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Custom icon for the parent folder arrow."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Custom icon for the reload button."
-msgstr ""
-
-#: doc/classes/FileDialog.xml
-msgid "Custom icon for the toggle hidden button."
-msgstr ""
-
-#: doc/classes/float.xml
-msgid "Float built-in type."
-msgstr ""
-
-#: doc/classes/float.xml
-msgid ""
-"The [float] built-in type is a 64-bit double-precision floating-point "
-"number, equivalent to [code]double[/code] in C++. This type has 14 reliable "
-"decimal digits of precision. The [float] type can be stored in [Variant], "
-"which is the generic type used by the engine. The maximum value of [float] "
-"is approximately [code]1.79769e308[/code], and the minimum is approximately "
-"[code]-1.79769e308[/code].\n"
-"Most methods and properties in the engine use 32-bit single-precision "
-"floating-point numbers instead, equivalent to [code]float[/code] in C++, "
-"which have 6 reliable decimal digits of precision. For data structures such "
-"as [Vector2] and [Vector3], Godot uses 32-bit floating-point numbers.\n"
-"Math done using the [float] type is not guaranteed to be exact or "
-"deterministic, and will often result in small errors. You should usually use "
-"the [method @GDScript.is_equal_approx] and [method @GDScript.is_zero_approx] "
-"methods instead of [code]==[/code] to compare [float] values for equality."
-msgstr ""
-
-#: doc/classes/float.xml
-msgid "Wikipedia: Double-precision floating-point format"
-msgstr ""
-
-#: doc/classes/float.xml
-msgid "Wikipedia: Single-precision floating-point format"
-msgstr ""
-
-#: doc/classes/float.xml
-msgid ""
-"Cast a [bool] value to a floating-point value, [code]float(true)[/code] will "
-"be equal to 1.0 and [code]float(false)[/code] will be equal to 0.0."
-msgstr ""
-
-#: doc/classes/float.xml
-msgid ""
-"Cast an [int] value to a floating-point value, [code]float(1)[/code] will be "
-"equal to 1.0."
-msgstr ""
-
-#: doc/classes/float.xml
-msgid ""
-"Cast a [String] value to a floating-point value. This method accepts float "
-"value strings like [code]\"1.23\"[/code] and exponential notation strings "
-"for its parameter so calling [code]float(\"1e3\")[/code] will return 1000.0 "
-"and calling [code]float(\"1e-3\")[/code] will return 0.001. Calling this "
-"method with an invalid float string will return 0. This method stops parsing "
-"at the first invalid character and will return the parsed result so far, so "
-"calling [code]float(\"1a3\")[/code] will return 1 while calling "
-"[code]float(\"1e3a2\")[/code] will return 1000.0."
-msgstr ""
-
-#: doc/classes/FlowContainer.xml
-msgid "Base class for flow containers."
-msgstr ""
-
-#: doc/classes/FlowContainer.xml
-msgid ""
-"Arranges child [Control] nodes vertically or horizontally in a left-to-right "
-"or top-to-bottom flow.\n"
-"A line is filled with [Control] nodes until no more fit on the same line, "
-"similar to text in an autowrapped label."
-msgstr ""
-
-#: doc/classes/FlowContainer.xml
-#, fuzzy
-msgid "Returns the current line count."
-msgstr "Gibt den aktuell wiedergegebenen Animationszustand zurück."
-
-#: doc/classes/Font.xml
-msgid "Internationalized font and text drawing support."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Font contains a Unicode-compatible character set, as well as the ability to "
-"draw it with variable width, ascent, descent and kerning. For creating fonts "
-"from TTF files (or other font formats), see the editor support for fonts.\n"
-"[b]Note:[/b] If a [DynamicFont] doesn't contain a character used in a "
-"string, the character in question will be replaced with codepoint "
-"[code]0xfffd[/code] if it's available in the [DynamicFont]. If this "
-"replacement character isn't available in the DynamicFont, the character will "
-"be hidden without displaying any replacement character in the string.\n"
-"[b]Note:[/b] If a [BitmapFont] doesn't contain a character used in a string, "
-"the character in question will be hidden without displaying any replacement "
-"character in the string.\n"
-"[b]Note:[/b] Unicode characters after [code]0xffff[/code] (such as most "
-"emoji) are [i]not[/i] supported on Windows. They will display as unknown "
-"characters instead. This will be resolved in Godot 4.0."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Draw [code]string[/code] into a canvas item using the font at a given "
-"position, with [code]modulate[/code] color, and optionally clipping the "
-"width. [code]position[/code] specifies the baseline, not the top. To draw "
-"from the top, [i]ascent[/i] must be added to the Y axis.\n"
-"See also [method CanvasItem.draw_string]."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Draw character [code]char[/code] into a canvas item using the font at a "
-"given position, with [code]modulate[/code] color, and optionally kerning if "
-"[code]next[/code] is passed. clipping the width. [code]position[/code] "
-"specifies the baseline, not the top. To draw from the top, [i]ascent[/i] "
-"must be added to the Y axis. The width used by the character is returned, "
-"making this function useful for drawing strings character by character.\n"
-"If [code]outline[/code] is [code]true[/code], the outline of the character "
-"is drawn instead of the character itself."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid "Returns the font ascent (number of pixels above the baseline)."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Returns outline contours of the glyph as a [code]Dictionary[/code] with the "
-"following contents:\n"
-"[code]points[/code]         - [PoolVector3Array], containing outline points. "
-"[code]x[/code] and [code]y[/code] are point coordinates. [code]z[/code] is "
-"the type of the point, using the [enum ContourPointTag] values.\n"
-"[code]contours[/code]       - [PoolIntArray], containing indices the end "
-"points of each contour.\n"
-"[code]orientation[/code]    - [bool], contour orientation. If [code]true[/"
-"code], clockwise contours must be filled."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Returns the size of a character, optionally taking kerning into account if "
-"the next character is provided. Note that the height returned is the font "
-"height (see [method get_height]) and has no relation to the glyph height."
-msgstr ""
-
-#: doc/classes/Font.xml
-#, fuzzy
-msgid "Returns resource id of the cache texture containing the char."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/Font.xml
-#, fuzzy
-msgid "Returns size of the cache texture containing the char."
-msgstr "Gibt den Namen der nächsten Animation in der Warteschlange zurück."
-
-#: doc/classes/Font.xml
-#, fuzzy
-msgid "Returns char offset from the baseline."
-msgstr "Gibt den Kosinus des Parameters zurück."
-
-#: doc/classes/Font.xml
-#, fuzzy
-msgid "Returns size of the char."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/Font.xml
-msgid "Returns rectangle in the cache texture containing the char."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid "Returns the font descent (number of pixels below the baseline)."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid "Returns the total font height (ascent plus descent) in pixels."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Returns the size of a string, taking kerning and advance into account. Note "
-"that the height returned is the font height (see [method get_height]) and "
-"has no relation to the string."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Returns the size that the string would have with word wrapping enabled with "
-"a fixed [code]width[/code]."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid "Returns [code]true[/code] if the font has an outline."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"After editing a font (changing size, ascent, char rects, etc.). Call this "
-"function to propagate changes to controls that might use it."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid "Contour point is on the curve."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Contour point isn't on the curve, but serves as a control point for a conic "
-"(quadratic) Bézier arc."
-msgstr ""
-
-#: doc/classes/Font.xml
-msgid ""
-"Contour point isn't on the curve, but serves as a control point for a cubic "
-"Bézier arc."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-msgid "Reference to a function in an object."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-msgid ""
-"In GDScript, functions are not [i]first-class objects[/i]. This means it is "
-"impossible to store them directly as variables, return them from another "
-"function, or pass them as arguments.\n"
-"However, by creating a [FuncRef] using the [method @GDScript.funcref] "
-"function, a reference to a function in a given object can be created, passed "
-"around and called."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-msgid ""
-"Calls the referenced function previously set in [member function] or [method "
-"@GDScript.funcref]."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-msgid ""
-"Calls the referenced function previously set in [member function] or [method "
-"@GDScript.funcref]. Contrarily to [method call_func], this method does not "
-"support a variable number of arguments but expects all parameters to be "
-"passed via a single [Array]."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-msgid "Returns whether the object still exists and has the function assigned."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-msgid ""
-"The object containing the referenced function. This object must be of a type "
-"actually inheriting from [Object], not a built-in type such as [int], "
-"[Vector2] or [Dictionary]."
-msgstr ""
-
-#: doc/classes/FuncRef.xml
-#, fuzzy
-msgid "The name of the referenced function."
-msgstr "Der Name des Audiobusses des Bereichs."
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"An external library containing functions or script classes to use in Godot."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"A GDNative library can implement [NativeScript]s, global functions to call "
-"with the [GDNative] class, or low-level engine extensions through interfaces "
-"such as [ARVRInterfaceGDNative]. The library must be compiled for each "
-"platform and architecture that the project will run on."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"Returns paths to all dependency libraries for the current platform and "
-"architecture."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"Returns the path to the dynamic library file for the current platform and "
-"architecture."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"This resource in INI-style [ConfigFile] format, as in [code].gdnlib[/code] "
-"files."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"If [code]true[/code], Godot loads only one copy of the library and each "
-"script that references the library will share static data like static or "
-"global variables.\n"
-"If [code]false[/code], Godot loads a separate copy of the library into "
-"memory for each script that references it."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"If [code]true[/code], the editor will temporarily unload the library "
-"whenever the user switches away from the editor window, allowing the user to "
-"recompile the library without restarting Godot.\n"
-"[b]Note:[/b] If the library defines tool scripts that run inside the editor, "
-"[code]reloadable[/code] must be [code]false[/code]. Otherwise, the editor "
-"will attempt to unload the tool scripts while they're in use and crash."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"If [code]true[/code], Godot loads the library at startup rather than the "
-"first time a script uses the library, calling [code]{prefix}"
-"gdnative_singleton[/code] after initializing the library (where [code]"
-"{prefix}[/code] is the value of [member symbol_prefix]). The library remains "
-"loaded as long as Godot is running.\n"
-"[b]Note:[/b] A singleton library cannot be [member reloadable]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/GDNativeLibrary.xml
-msgid ""
-"The prefix this library's entry point functions begin with. For example, a "
-"GDNativeLibrary would declare its [code]gdnative_init[/code] function as "
-"[code]godot_gdnative_init[/code] by default.\n"
-"On platforms that require statically linking libraries (currently only iOS), "
-"each library must have a different [code]symbol_prefix[/code]."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScript.xml
-msgid "A script implemented in the GDScript programming language."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScript.xml
-msgid ""
-"A script implemented in the GDScript programming language. The script "
-"extends the functionality of all objects that instance it.\n"
-"[method new] creates a new instance of the script. [method Object."
-"set_script] extends an existing object, if that object's class matches one "
-"of the script's base classes."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScript.xml
-msgid "Returns byte code for the script source code."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScript.xml
-msgid ""
-"Returns a new instance of the script.\n"
-"For example:\n"
-"[codeblock]\n"
-"var MyClass = load(\"myclass.gd\")\n"
-"var instance = MyClass.new()\n"
-"assert(instance.get_script() == MyClass)\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScriptFunctionState.xml
-msgid "State of a function call after yielding."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScriptFunctionState.xml
-msgid ""
-"Calling [method @GDScript.yield] within a function will cause that function "
-"to yield and return its current state as an object of this type. The yielded "
-"function call can then be resumed later by calling [method resume] on this "
-"state object."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScriptFunctionState.xml
-msgid ""
-"Check whether the function call may be resumed. This is not the case if the "
-"function state was already resumed.\n"
-"If [code]extended_check[/code] is enabled, it also checks if the associated "
-"script and object still exist. The extended check is done in debug mode as "
-"part of [method GDScriptFunctionState.resume], but you can use this if you "
-"know you may be trying to resume without knowing for sure the object and/or "
-"script have survived up to that point."
-msgstr ""
-
-#: modules/gdscript/doc_classes/GDScriptFunctionState.xml
-msgid ""
-"Resume execution of the yielded function call.\n"
-"If handed an argument, return the argument from the [method @GDScript.yield] "
-"call in the yielded function call. You can pass e.g. an [Array] to hand "
-"multiple arguments.\n"
-"This function returns what the resumed function call returns, possibly "
-"another function state if yielded again."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The generic 6-degrees-of-freedom joint can implement a variety of joint "
-"types by locking certain axes' rotation or translation."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The first 3 DOF axes are linear axes, which represent translation of Bodies, "
-"and the latter 3 DOF axes represent the angular motion. Each axis can be "
-"either locked, or limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of rotational damping across the X axis.\n"
-"The lower, the longer an impulse from one side takes to travel to the other "
-"side."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], rotation across the X axis is limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"When rotating across the X axis, this error tolerance factor defines how "
-"much the correction gets slowed down. The lower, the slower."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum amount of force that can occur, when rotating around the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The minimum rotation in negative direction to break loose and rotate around "
-"the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of rotational restitution across the X axis. The lower, the more "
-"restitution occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed of all rotations across the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The minimum rotation in positive direction to break loose and rotate around "
-"the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of rotational damping across the Y axis. The lower, the more "
-"dampening occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], rotation across the Y axis is limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"When rotating across the Y axis, this error tolerance factor defines how "
-"much the correction gets slowed down. The lower, the slower."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum amount of force that can occur, when rotating around the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The minimum rotation in negative direction to break loose and rotate around "
-"the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of rotational restitution across the Y axis. The lower, the more "
-"restitution occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed of all rotations across the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The minimum rotation in positive direction to break loose and rotate around "
-"the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of rotational damping across the Z axis. The lower, the more "
-"dampening occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], rotation across the Z axis is limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"When rotating across the Z axis, this error tolerance factor defines how "
-"much the correction gets slowed down. The lower, the slower."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum amount of force that can occur, when rotating around the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The minimum rotation in negative direction to break loose and rotate around "
-"the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of rotational restitution across the Z axis. The lower, the more "
-"restitution occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed of all rotations across the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The minimum rotation in positive direction to break loose and rotate around "
-"the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], a rotating motor at the X axis is enabled."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "Maximum acceleration for the motor at the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "Target speed for the motor at the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], a rotating motor at the Y axis is enabled."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "Maximum acceleration for the motor at the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "Target speed for the motor at the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], a rotating motor at the Z axis is enabled."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "Maximum acceleration for the motor at the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "Target speed for the motor at the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The amount of damping that happens at the X motion."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], the linear motion across the X axis is limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The minimum difference between the pivot points' X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of restitution on the X axis movement. The lower, the more "
-"momentum gets lost."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"A factor applied to the movement across the X axis. The lower, the slower "
-"the movement."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The maximum difference between the pivot points' X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The amount of damping that happens at the Y motion."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], the linear motion across the Y axis is limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The minimum difference between the pivot points' Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of restitution on the Y axis movement. The lower, the more "
-"momentum gets lost."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"A factor applied to the movement across the Y axis. The lower, the slower "
-"the movement."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The maximum difference between the pivot points' Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The amount of damping that happens at the Z motion."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If [code]true[/code], the linear motion across the Z axis is limited."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The minimum difference between the pivot points' Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of restitution on the Z axis movement. The lower, the more "
-"momentum gets lost."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"A factor applied to the movement across the Z axis. The lower, the slower "
-"the movement."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The maximum difference between the pivot points' Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"If [code]true[/code], then there is a linear motor on the X axis. It will "
-"attempt to reach the target velocity while staying within the force limits."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum force the linear motor can apply on the X axis while trying to "
-"reach the target velocity."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed that the linear motor will attempt to reach on the X axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"If [code]true[/code], then there is a linear motor on the Y axis. It will "
-"attempt to reach the target velocity while staying within the force limits."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum force the linear motor can apply on the Y axis while trying to "
-"reach the target velocity."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed that the linear motor will attempt to reach on the Y axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"If [code]true[/code], then there is a linear motor on the Z axis. It will "
-"attempt to reach the target velocity while staying within the force limits."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum force the linear motor can apply on the Z axis while trying to "
-"reach the target velocity."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed that the linear motor will attempt to reach on the Z axis."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid "The minimum difference between the pivot points' axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid "The maximum difference between the pivot points' axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"A factor applied to the movement across the axes. The lower, the slower the "
-"movement."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The amount of restitution on the axes' movement. The lower, the more "
-"momentum gets lost."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The amount of damping that happens at the linear motion across the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The velocity the linear motor will try to reach."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"The maximum force the linear motor will apply while trying to reach the "
-"velocity target."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The minimum rotation in negative direction to break loose and rotate around "
-"the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The minimum rotation in positive direction to break loose and rotate around "
-"the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "The speed of all rotations across the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The amount of rotational damping across the axes. The lower, the more "
-"dampening occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The amount of rotational restitution across the axes. The lower, the more "
-"restitution occurs."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The maximum amount of force that can occur, when rotating around the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid ""
-"When rotating across the axes, this error tolerance factor defines how much "
-"the correction gets slowed down. The lower, the slower."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid "Target speed for the motor at the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/PhysicsServer.xml
-msgid "Maximum acceleration for the motor at the axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If enabled, linear motion is possible within the given limits."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If enabled, rotational motion is possible within the given limits."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If enabled, there is a rotational motor across these axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml
-msgid "If enabled, there is a linear motor across these axes."
-msgstr ""
-
-#: doc/classes/Generic6DOFJoint.xml doc/classes/HingeJoint.xml
-msgid "Represents the size of the [enum Flag] enum."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid "Helper node to calculate generic geometry operations."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Geometry provides users with a set of helper functions to create geometric "
-"shapes, compute intersections between shapes, and process various other "
-"geometric operations."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns an array with 6 [Plane]s that describe the sides of a box centered "
-"at the origin. The box size is defined by [code]extents[/code], which "
-"represents one (positive) corner of the box (i.e. half its actual size)."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns an array of [Plane]s closely bounding a faceted capsule centered at "
-"the origin with radius [code]radius[/code] and height [code]height[/code]. "
-"The parameter [code]sides[/code] defines how many planes will be generated "
-"for the side part of the capsule, whereas [code]lats[/code] gives the number "
-"of latitudinal steps at the bottom and top of the capsule. The parameter "
-"[code]axis[/code] describes the axis along which the capsule is oriented (0 "
-"for X, 1 for Y, 2 for Z)."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns an array of [Plane]s closely bounding a faceted cylinder centered at "
-"the origin with radius [code]radius[/code] and height [code]height[/code]. "
-"The parameter [code]sides[/code] defines how many planes will be generated "
-"for the round part of the cylinder. The parameter [code]axis[/code] "
-"describes the axis along which the cylinder is oriented (0 for X, 1 for Y, 2 "
-"for Z)."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Clips the polygon defined by the points in [code]points[/code] against the "
-"[code]plane[/code] and returns the points of the clipped polygon."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Clips [code]polygon_a[/code] against [code]polygon_b[/code] and returns an "
-"array of clipped polygons. This performs [constant OPERATION_DIFFERENCE] "
-"between polygons. Returns an empty array if [code]polygon_b[/code] "
-"completely overlaps [code]polygon_a[/code].\n"
-"If [code]polygon_b[/code] is enclosed by [code]polygon_a[/code], returns an "
-"outer polygon (boundary) and inner polygon (hole) which could be "
-"distinguished by calling [method is_polygon_clockwise]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Clips [code]polyline[/code] against [code]polygon[/code] and returns an "
-"array of clipped polylines. This performs [constant OPERATION_DIFFERENCE] "
-"between the polyline and the polygon. This operation can be thought of as "
-"cutting a line with a closed shape."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Given an array of [Vector2]s, returns the convex hull as a list of points in "
-"counterclockwise order. The last point is the same as the first one."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Mutually excludes common area defined by intersection of [code]polygon_a[/"
-"code] and [code]polygon_b[/code] (see [method intersect_polygons_2d]) and "
-"returns an array of excluded polygons. This performs [constant "
-"OPERATION_XOR] between polygons. In other words, returns all but common area "
-"between polygons.\n"
-"The operation may result in an outer polygon (boundary) and inner polygon "
-"(hole) produced which could be distinguished by calling [method "
-"is_polygon_clockwise]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns the 3D point on the 3D segment ([code]s1[/code], [code]s2[/code]) "
-"that is closest to [code]point[/code]. The returned point will always be "
-"inside the specified segment."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns the 2D point on the 2D segment ([code]s1[/code], [code]s2[/code]) "
-"that is closest to [code]point[/code]. The returned point will always be "
-"inside the specified segment."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns the 3D point on the 3D line defined by ([code]s1[/code], [code]s2[/"
-"code]) that is closest to [code]point[/code]. The returned point can be "
-"inside the segment ([code]s1[/code], [code]s2[/code]) or outside of it, i.e. "
-"somewhere on the line extending from the segment."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns the 2D point on the 2D line defined by ([code]s1[/code], [code]s2[/"
-"code]) that is closest to [code]point[/code]. The returned point can be "
-"inside the segment ([code]s1[/code], [code]s2[/code]) or outside of it, i.e. "
-"somewhere on the line extending from the segment."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Given the two 3D segments ([code]p1[/code], [code]p2[/code]) and ([code]q1[/"
-"code], [code]q2[/code]), finds those two points on the two segments that are "
-"closest to each other. Returns a [PoolVector3Array] that contains this point "
-"on ([code]p1[/code], [code]p2[/code]) as well the accompanying point on "
-"([code]q1[/code], [code]q2[/code])."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Given the two 2D segments ([code]p1[/code], [code]q1[/code]) and ([code]p2[/"
-"code], [code]q2[/code]), finds those two points on the two segments that are "
-"closest to each other. Returns a [PoolVector2Array] that contains this point "
-"on ([code]p1[/code], [code]q1[/code]) as well the accompanying point on "
-"([code]p2[/code], [code]q2[/code])."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid "Used internally by the engine."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Intersects [code]polygon_a[/code] with [code]polygon_b[/code] and returns an "
-"array of intersected polygons. This performs [constant "
-"OPERATION_INTERSECTION] between polygons. In other words, returns common "
-"area shared by polygons. Returns an empty array if no intersection occurs.\n"
-"The operation may result in an outer polygon (boundary) and inner polygon "
-"(hole) produced which could be distinguished by calling [method "
-"is_polygon_clockwise]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Intersects [code]polyline[/code] with [code]polygon[/code] and returns an "
-"array of intersected polylines. This performs [constant "
-"OPERATION_INTERSECTION] between the polyline and the polygon. This operation "
-"can be thought of as chopping a line with a closed shape."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns [code]true[/code] if [code]point[/code] is inside the circle or if "
-"it's located exactly [i]on[/i] the circle's boundary, otherwise returns "
-"[code]false[/code]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns [code]true[/code] if [code]point[/code] is inside [code]polygon[/"
-"code] or if it's located exactly [i]on[/i] polygon's boundary, otherwise "
-"returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns [code]true[/code] if [code]polygon[/code]'s vertices are ordered in "
-"clockwise order, otherwise returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Checks if the two lines ([code]from_a[/code], [code]dir_a[/code]) and "
-"([code]from_b[/code], [code]dir_b[/code]) intersect. If yes, return the "
-"point of intersection as [Vector2]. If no intersection takes place, returns "
-"[code]null[/code].\n"
-"[b]Note:[/b] The lines are specified using direction vectors, not end points."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Given an array of [Vector2]s representing tiles, builds an atlas. The "
-"returned dictionary has two keys: [code]points[/code] is an array of "
-"[Vector2] that specifies the positions of each tile, [code]size[/code] "
-"contains the overall size of the whole atlas as [Vector2]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Merges (combines) [code]polygon_a[/code] and [code]polygon_b[/code] and "
-"returns an array of merged polygons. This performs [constant "
-"OPERATION_UNION] between polygons.\n"
-"The operation may result in an outer polygon (boundary) and multiple inner "
-"polygons (holes) produced which could be distinguished by calling [method "
-"is_polygon_clockwise]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Inflates or deflates [code]polygon[/code] by [code]delta[/code] units "
-"(pixels). If [code]delta[/code] is positive, makes the polygon grow outward. "
-"If [code]delta[/code] is negative, shrinks the polygon inward. Returns an "
-"array of polygons because inflating/deflating may result in multiple "
-"discrete polygons. Returns an empty array if [code]delta[/code] is negative "
-"and the absolute value of it approximately exceeds the minimum bounding "
-"rectangle dimensions of the polygon.\n"
-"Each polygon's vertices will be rounded as determined by [code]join_type[/"
-"code], see [enum PolyJoinType].\n"
-"The operation may result in an outer polygon (boundary) and inner polygon "
-"(hole) produced which could be distinguished by calling [method "
-"is_polygon_clockwise].\n"
-"[b]Note:[/b] To translate the polygon's vertices specifically, use the "
-"[method Transform2D.xform] method:\n"
-"[codeblock]\n"
-"var polygon = PoolVector2Array([Vector2(0, 0), Vector2(100, 0), Vector2(100, "
-"100), Vector2(0, 100)])\n"
-"var offset = Vector2(50, 50)\n"
-"polygon = Transform2D(0, offset).xform(polygon)\n"
-"print(polygon) # prints [Vector2(50, 50), Vector2(150, 50), Vector2(150, "
-"150), Vector2(50, 150)]\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Inflates or deflates [code]polyline[/code] by [code]delta[/code] units "
-"(pixels), producing polygons. If [code]delta[/code] is positive, makes the "
-"polyline grow outward. Returns an array of polygons because inflating/"
-"deflating may result in multiple discrete polygons. If [code]delta[/code] is "
-"negative, returns an empty array.\n"
-"Each polygon's vertices will be rounded as determined by [code]join_type[/"
-"code], see [enum PolyJoinType].\n"
-"Each polygon's endpoints will be rounded as determined by [code]end_type[/"
-"code], see [enum PolyEndType].\n"
-"The operation may result in an outer polygon (boundary) and inner polygon "
-"(hole) produced which could be distinguished by calling [method "
-"is_polygon_clockwise]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Returns if [code]point[/code] is inside the triangle specified by [code]a[/"
-"code], [code]b[/code] and [code]c[/code]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Tests if the 3D ray starting at [code]from[/code] with the direction of "
-"[code]dir[/code] intersects the triangle specified by [code]a[/code], "
-"[code]b[/code] and [code]c[/code]. If yes, returns the point of intersection "
-"as [Vector3]. If no intersection takes place, an empty [Variant] is returned."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Given the 2D segment ([code]segment_from[/code], [code]segment_to[/code]), "
-"returns the position on the segment (as a number between 0 and 1) at which "
-"the segment hits the circle that is located at position "
-"[code]circle_position[/code] and has radius [code]circle_radius[/code]. If "
-"the segment does not intersect the circle, -1 is returned (this is also the "
-"case if the line extending the segment would intersect the circle, but the "
-"segment does not)."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Given a convex hull defined though the [Plane]s in the array [code]planes[/"
-"code], tests if the segment ([code]from[/code], [code]to[/code]) intersects "
-"with that hull. If an intersection is found, returns a [PoolVector3Array] "
-"containing the point the intersection and the hull's normal. If no "
-"intersecion is found, an the returned array is empty."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Checks if the segment ([code]from[/code], [code]to[/code]) intersects the "
-"cylinder with height [code]height[/code] that is centered at the origin and "
-"has radius [code]radius[/code]. If no, returns an empty [PoolVector3Array]. "
-"If an intersection takes place, the returned array contains the point of "
-"intersection and the cylinder's normal at the point of intersection."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Checks if the two segments ([code]from_a[/code], [code]to_a[/code]) and "
-"([code]from_b[/code], [code]to_b[/code]) intersect. If yes, return the point "
-"of intersection as [Vector2]. If no intersection takes place, returns "
-"[code]null[/code]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Checks if the segment ([code]from[/code], [code]to[/code]) intersects the "
-"sphere that is located at [code]sphere_position[/code] and has radius "
-"[code]sphere_radius[/code]. If no, returns an empty [PoolVector3Array]. If "
-"yes, returns a [PoolVector3Array] containing the point of intersection and "
-"the sphere's normal at the point of intersection."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Tests if the segment ([code]from[/code], [code]to[/code]) intersects the "
-"triangle [code]a[/code], [code]b[/code], [code]c[/code]. If yes, returns the "
-"point of intersection as [Vector3]. If no intersection takes place, an empty "
-"[Variant] is returned."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Triangulates the area specified by discrete set of [code]points[/code] such "
-"that no point is inside the circumcircle of any resulting triangle. Returns "
-"a [PoolIntArray] where each triangle consists of three consecutive point "
-"indices into [code]points[/code] (i.e. the returned array will have [code]n "
-"* 3[/code] elements, with [code]n[/code] being the number of found "
-"triangles). If the triangulation did not succeed, an empty [PoolIntArray] is "
-"returned."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Triangulates the polygon specified by the points in [code]polygon[/code]. "
-"Returns a [PoolIntArray] where each triangle consists of three consecutive "
-"point indices into [code]polygon[/code] (i.e. the returned array will have "
-"[code]n * 3[/code] elements, with [code]n[/code] being the number of found "
-"triangles). Output triangles will always be counter clockwise, and the "
-"contour will be flipped if it's clockwise. If the triangulation did not "
-"succeed, an empty [PoolIntArray] is returned."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Create regions where either subject or clip polygons (or both) are filled."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Create regions where subject polygons are filled except where clip polygons "
-"are filled."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid "Create regions where both subject and clip polygons are filled."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Create regions where either subject or clip polygons are filled but not "
-"where both are filled."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Squaring is applied uniformally at all convex edge joins at [code]1 * delta[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"While flattened paths can never perfectly trace an arc, they are "
-"approximated by a series of arc chords."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"There's a necessary limit to mitered joins since offsetting edges that join "
-"at very acute angles will produce excessively long and narrow \"spikes\". "
-"For any given edge join, when miter offsetting would exceed that maximum "
-"distance, \"square\" joining is applied."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Endpoints are joined using the [enum PolyJoinType] value and the path filled "
-"as a polygon."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid ""
-"Endpoints are joined using the [enum PolyJoinType] value and the path filled "
-"as a polyline."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid "Endpoints are squared off with no extension."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid "Endpoints are squared off and extended by [code]delta[/code] units."
-msgstr ""
-
-#: doc/classes/Geometry.xml
-msgid "Endpoints are rounded off and extended by [code]delta[/code] units."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid "Base node for geometry-based visual instances."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Base node for geometry-based visual instances. Shares some common "
-"functionality like visibility and custom materials."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Returns the [enum GeometryInstance.Flags] that have been set for this object."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Overrides the bounding box of this node with a custom one. To remove it, set "
-"an [AABB] with all fields set to zero."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Sets the [enum GeometryInstance.Flags] specified. See [enum GeometryInstance."
-"Flags] for options."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The selected shadow casting flag. See [enum ShadowCastingSetting] for "
-"possible values."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The extra distance added to the GeometryInstance's bounding box ([AABB]) to "
-"increase its cull box."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"When disabled, the mesh will be taken into account when computing indirect "
-"lighting, but the resulting lightmap will not be saved. Useful for emissive "
-"only materials or shadow casters."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Scale factor for the generated baked lightmap. Useful for adding detail to "
-"certain mesh instances."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The GeometryInstance's max LOD distance.\n"
-"[b]Note:[/b] This property currently has no effect."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The GeometryInstance's max LOD margin.\n"
-"[b]Note:[/b] This property currently has no effect."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The GeometryInstance's min LOD distance.\n"
-"[b]Note:[/b] This property currently has no effect."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The GeometryInstance's min LOD margin.\n"
-"[b]Note:[/b] This property currently has no effect."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The material overlay for the whole geometry.\n"
-"If a material is assigned to this property, it will be rendered on top of "
-"any other active material for all the surfaces."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"The material override for the whole geometry.\n"
-"If a material is assigned to this property, it will be used instead of any "
-"material set in any material slot of the mesh."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"If [code]true[/code], this GeometryInstance will be used when baking lights "
-"using a [GIProbe] or [BakedLightmap]."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid "The generated lightmap texture will have the original size."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid "The generated lightmap texture will be twice as large, on each axis."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid "The generated lightmap texture will be 4 times as large, on each axis."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid "The generated lightmap texture will be 8 times as large, on each axis."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid "Will not cast any shadows."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Will cast shadows from all visible faces in the GeometryInstance.\n"
-"Will take culling into account, so faces not being rendered will not be "
-"taken into account when shadow casting."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Will cast shadows from all visible faces in the GeometryInstance.\n"
-"Will not take culling into account, so all faces will be taken into account "
-"when shadow casting."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Will only show the shadows casted from this object.\n"
-"In other words, the actual mesh will not be visible, only the shadows casted "
-"from the mesh will be."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Will allow the GeometryInstance to be used when baking lights using a "
-"[GIProbe] or [BakedLightmap]."
-msgstr ""
-
-#: doc/classes/GeometryInstance.xml
-msgid ""
-"Unused in this class, exposed for consistency with [enum VisualServer."
-"InstanceFlags]."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "Real-time global illumination (GI) probe."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"[GIProbe]s are used to provide high-quality real-time indirect light to "
-"scenes. They precompute the effect of objects that emit light and the effect "
-"of static geometry to simulate the behavior of complex light in real-time. "
-"[GIProbe]s need to be baked before using, however, once baked, dynamic "
-"objects will receive light from them. Further, lights can be fully dynamic "
-"or baked.\n"
-"Having [GIProbe]s in a scene can be expensive, the quality of the probe can "
-"be turned down in exchange for better performance in the [ProjectSettings] "
-"using [member ProjectSettings.rendering/quality/voxel_cone_tracing/"
-"high_quality].\n"
-"[b]Procedural generation:[/b] [GIProbe] can be baked in an exported project, "
-"which makes it suitable for procedurally generated or user-built levels as "
-"long as all the geometry is generated in advance.\n"
-"[b]Performance:[/b] [GIProbe] is relatively demanding on the GPU and is not "
-"suited to low-end hardware such as integrated graphics (consider "
-"[BakedLightmap] instead). To provide a fallback for low-end hardware, "
-"consider adding an option to disable [GIProbe] in your project's options "
-"menus. A [GIProbe] node can be disabled by hiding it.\n"
-"[b]Note:[/b] Meshes should have sufficiently thick walls to avoid light "
-"leaks (avoid one-sided walls). For interior levels, enclose your level "
-"geometry in a sufficiently large box and bridge the loops to close the mesh. "
-"To further prevent light leaks, you can also strategically place temporary "
-"[MeshInstance] nodes with [member GeometryInstance.use_in_baked_light] "
-"enabled. These temporary nodes can then be hidden after baking the [GIProbe] "
-"node.\n"
-"[b]Note:[/b] Due to a renderer limitation, emissive [ShaderMaterial]s cannot "
-"emit light when used in a [GIProbe]. Only emissive [SpatialMaterial]s can "
-"emit light in a [GIProbe]."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "GI probes"
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Bakes the effect from all [GeometryInstance]s marked with [member "
-"GeometryInstance.use_in_baked_light] and [Light]s marked with either "
-"[constant Light.BAKE_INDIRECT] or [constant Light.BAKE_ALL]. If "
-"[code]create_visual_debug[/code] is [code]true[/code], after baking the "
-"light, this will generate a [MultiMesh] that has a cube representing each "
-"solid cell with each cube colored to the cell's albedo color. This can be "
-"used to visualize the [GIProbe]'s data and debug any issues that may be "
-"occurring.\n"
-"[b]Note:[/b] [method bake] works from the editor and in exported projects. "
-"This makes it suitable for procedurally generated or user-built levels. "
-"Baking a [GIProbe] generally takes from 5 to 20 seconds in most scenes. "
-"Reducing [member subdiv] can speed up baking.\n"
-"[b]Note:[/b] [GeometryInstance]s and [Light]s must be fully ready before "
-"[method bake] is called. If you are procedurally creating those and some "
-"meshes or lights are missing from your baked [GIProbe], use "
-"[code]call_deferred(\"bake\")[/code] instead of calling [method bake] "
-"directly."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "Calls [method bake] with [code]create_visual_debug[/code] enabled."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Offsets the lookup of the light contribution from the [GIProbe]. This can be "
-"used to avoid self-shadowing, but may introduce light leaking at higher "
-"values. This and [member normal_bias] should be played around with to "
-"minimize self-shadowing and light leaking.\n"
-"[b]Note:[/b] [code]bias[/code] should usually be above 1.0 as that is the "
-"size of the voxels."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"[i]Deprecated.[/i] This property has been deprecated due to known bugs and "
-"no longer has any effect when enabled."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "The [GIProbeData] resource that holds the data for this [GIProbe]."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"The maximum brightness that the [GIProbe] will recognize. Brightness will be "
-"scaled within this range."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Energy multiplier. Makes the lighting contribution from the [GIProbe] "
-"brighter."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"The size of the area covered by the [GIProbe]. If you make the extents "
-"larger without increasing the subdivisions with [member subdiv], the size of "
-"each cell will increase and result in lower detailed lighting."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], ignores the sky contribution when calculating lighting."
-msgstr ""
-"Wenn [code]true[/code], wird die Sub-Animation nach Beendigung automatisch "
-"neu gestartet."
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Offsets the lookup into the [GIProbe] based on the object's normal "
-"direction. Can be used to reduce some self-shadowing artifacts."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"How much light propagates through the probe internally. A higher value "
-"allows light to spread further."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Number of times to subdivide the grid that the [GIProbe] operates on. A "
-"higher number results in finer detail and thus higher visual quality, while "
-"lower numbers result in better performance."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Use 64 subdivisions. This is the lowest quality setting, but the fastest. "
-"Use it if you can, but especially use it on lower-end hardware."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "Use 128 subdivisions. This is the default quality setting."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "Use 256 subdivisions."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid ""
-"Use 512 subdivisions. This is the highest quality setting, but the slowest. "
-"On lower-end hardware, this could cause the GPU to stall."
-msgstr ""
-
-#: doc/classes/GIProbe.xml
-msgid "Represents the size of the [enum Subdiv] enum."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFAccessor.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFAccessor] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFAnimation.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFAnimation] within a script will cause an error in an exported "
-"project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFBufferView.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFBufferView] within a script will cause an error in an exported "
-"project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFCamera.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFCamera] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFDocument.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFDocument] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFLight] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"The [Color] of the light. Defaults to white. A black color causes the light "
-"to have no effect."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"The inner angle of the cone in a spotlight. Must be less than or equal to "
-"the outer cone angle.\n"
-"Within this angle, the light is at full brightness. Between the inner and "
-"outer cone angles, there is a transition from full brightness to zero "
-"brightness. When creating a Godot [SpotLight], the ratio between the inner "
-"and outer cone angles is used to calculate the attenuation of the light."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"The intensity of the light. This is expressed in candelas (lumens per "
-"steradian) for point and spot lights, and lux (lumens per m²) for "
-"directional lights. When creating a Godot light, this value is converted to "
-"a unitless multiplier."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"The outer angle of the cone in a spotlight. Must be greater than or equal to "
-"the inner angle.\n"
-"At this angle, the light drops off to zero brightness. Between the inner and "
-"outer cone angles, there is a transition from full brightness to zero "
-"brightness. If this angle is a half turn, then the spotlight emits in all "
-"directions. When creating a Godot [SpotLight], the outer cone angle is used "
-"as the angle of the spotlight."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"The range of the light, beyond which the light has no effect. GLTF lights "
-"with no range defined behave like physical lights (which have infinite "
-"range). When creating a Godot light, the range is clamped to 4096."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFLight.xml
-msgid ""
-"The type of the light. The values accepted by Godot are \"point\", \"spot\", "
-"and \"directional\", which correspond to Godot's [OmniLight], [SpotLight], "
-"and [DirectionalLight] respectively."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFMesh.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFMesh] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFNode.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFNode] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFSkeleton.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFSkeleton] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFSpecGloss.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFSpecGloss] within a script will cause an error in an exported "
-"project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFState.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFState] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/gltf/doc_classes/GLTFTexture.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [GLTFTexture] within a script will cause an error in an exported project."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid "Bridge between Godot and the Mono runtime (Mono-enabled builds only)."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"This class is a bridge between Godot and the Mono runtime. It exposes "
-"several low-level operations and is only available in Mono-enabled Godot "
-"builds.\n"
-"See also [CSharpScript]."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid "Attaches the current thread to the Mono runtime."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid "Detaches the current thread from the Mono runtime."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"Returns the current MonoDomain ID.\n"
-"[b]Note:[/b] The Mono runtime must be initialized for this method to work "
-"(use [method is_runtime_initialized] to check). If the Mono runtime isn't "
-"initialized at the time this method is called, the engine will crash."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"Returns the scripts MonoDomain's ID. This will be the same MonoDomain ID as "
-"[method get_domain_id], unless the scripts domain isn't loaded.\n"
-"[b]Note:[/b] The Mono runtime must be initialized for this method to work "
-"(use [method is_runtime_initialized] to check). If the Mono runtime isn't "
-"initialized at the time this method is called, the engine will crash."
-msgstr ""
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"Returns [code]true[/code] if the domain is being finalized, [code]false[/"
-"code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn dieser Bereich vollendet ist, ansonsten "
-"[code]false[/code]."
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"Returns [code]true[/code] if the Mono runtime is initialized, [code]false[/"
-"code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn die Mono Laufzeit initialisiert ist, "
-"ansonsten [code]false[/code]."
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"Returns [code]true[/code] if the Mono runtime is shutting down, [code]false[/"
-"code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn die Mono Laufzeit sich beendet, ansonsten "
-"[code]false[/code]."
-
-#: modules/mono/doc_classes/GodotSharp.xml
-msgid ""
-"Returns [code]true[/code] if the scripts domain is loaded, [code]false[/"
-"code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn der Skript Bereich lädt, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/Gradient.xml
-msgid ""
-"A color interpolator resource which can be used to generate colors between "
-"user-defined color points."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid ""
-"Given a set of colors, this resource will interpolate them in order. This "
-"means that if you have color 1, color 2 and color 3, the gradient will "
-"interpolate from color 1 to color 2 and from color 2 to color 3. The "
-"gradient will initially have 2 colors (black and white), one (black) at "
-"gradient lower offset 0 and the other (white) at the gradient higher offset "
-"1.\n"
-"See also [Curve] which supports more complex easing methods, but does not "
-"support colors."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid ""
-"Adds the specified color to the end of the ramp, with the specified offset."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Returns the color of the ramp color at index [code]point[/code]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Returns the offset of the ramp color at index [code]point[/code]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Returns the number of colors in the ramp."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Returns the interpolated color specified by [code]offset[/code]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-#, fuzzy
-msgid "Removes the color at the index [code]point[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/Gradient.xml
-msgid "Sets the color of the ramp color at index [code]point[/code]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Sets the offset for the ramp color at index [code]point[/code]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Gradient's colors returned as a [PoolColorArray]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid ""
-"Defines how the colors between points of the gradient are interpolated. See "
-"[enum InterpolationMode] for available modes."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid "Gradient's offsets returned as a [PoolRealArray]."
-msgstr ""
-
-#: doc/classes/Gradient.xml
-msgid ""
-"Constant interpolation, color changes abruptly at each point and stays "
-"uniform between. This might cause visible aliasing when used for a gradient "
-"texture in some cases."
-msgstr ""
-
-#: doc/classes/GradientTexture.xml
-msgid "Gradient-filled texture."
-msgstr ""
-
-#: doc/classes/GradientTexture.xml
-msgid ""
-"GradientTexture uses a [Gradient] to fill the texture data. The gradient "
-"will be filled from left to right using colors obtained from the gradient. "
-"This means the texture does not necessarily represent an exact copy of the "
-"gradient, but instead an interpolation of samples obtained from the gradient "
-"at fixed steps (see [member width]). See also [GradientTexture2D] and "
-"[CurveTexture]."
-msgstr ""
-
-#: doc/classes/GradientTexture.xml
-msgid "The [Gradient] that will be used to fill the texture."
-msgstr ""
-
-#: doc/classes/GradientTexture.xml
-msgid "The number of color samples that will be obtained from the [Gradient]."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid "Gradient-filled 2D texture."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The texture uses a [Gradient] to fill the texture data in 2D space. The "
-"gradient is filled according to the specified [member fill] and [member "
-"repeat] types using colors obtained from the gradient. The texture does not "
-"necessarily represent an exact copy of the gradient, but instead an "
-"interpolation of samples obtained from the gradient at fixed steps (see "
-"[member width] and [member height]). See also [GradientTexture] and "
-"[CurveTexture]."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The gradient fill type, one of the [enum Fill] values. The texture is filled "
-"by interpolating colors starting from [member fill_from] to [member fill_to] "
-"offsets."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The initial offset used to fill the texture specified in UV coordinates."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid "The final offset used to fill the texture specified in UV coordinates."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-#, fuzzy
-msgid "The [Gradient] used to fill the texture."
-msgstr "Der Name des Audiobusses des Bereichs."
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The number of vertical color samples that will be obtained from the "
-"[Gradient], which also represents the texture's height."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The gradient repeat type, one of the [enum Repeat] values. The texture is "
-"filled starting from [member fill_from] to [member fill_to] offsets by "
-"default, but the gradient fill can be repeated to cover the entire texture."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"If [code]true[/code], the generated texture will support high dynamic range "
-"([constant Image.FORMAT_RGBAF] format). This allows for glow effects to work "
-"if [member Environment.glow_enabled] is [code]true[/code]. If [code]false[/"
-"code], the generated texture will use low dynamic range; overbright colors "
-"will be clamped ([constant Image.FORMAT_RGBA8] format)."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The number of horizontal color samples that will be obtained from the "
-"[Gradient], which also represents the texture's width."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid "The colors are linearly interpolated in a straight line."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid "The colors are linearly interpolated in a circular pattern."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The gradient fill is restricted to the range defined by [member fill_from] "
-"to [member fill_to] offsets."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The texture is filled starting from [member fill_from] to [member fill_to] "
-"offsets, repeating the same pattern in both directions."
-msgstr ""
-
-#: doc/classes/GradientTexture2D.xml
-msgid ""
-"The texture is filled starting from [member fill_from] to [member fill_to] "
-"offsets, mirroring the pattern in both directions."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"GraphEdit is an area capable of showing various GraphNodes. It manages "
-"connection events between them."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"GraphEdit manages the showing of GraphNodes it contains, as well as "
-"connections and disconnections between them. Signals are sent for each of "
-"these two events. Disconnection between GraphNode slots is disabled by "
-"default.\n"
-"It is greatly advised to enable low-processor usage mode (see [member OS."
-"low_processor_usage_mode]) when using GraphEdits."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Makes possible the connection between two different slot types. The type is "
-"defined with the [method GraphNode.set_slot] method."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Makes possible to disconnect nodes when dragging from the slot at the left "
-"if it has the specified type."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Makes possible to disconnect nodes when dragging from the slot at the right "
-"if it has the specified type."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Removes all connections between nodes."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Create a connection between the [code]from_port[/code] slot of the "
-"[code]from[/code] GraphNode and the [code]to_port[/code] slot of the "
-"[code]to[/code] GraphNode. If the connection already exists, no connection "
-"is created."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Removes the connection between the [code]from_port[/code] slot of the "
-"[code]from[/code] GraphNode and the [code]to_port[/code] slot of the "
-"[code]to[/code] GraphNode. If the connection does not exist, no connection "
-"is removed."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Returns an Array containing the list of connections. A connection consists "
-"in a structure of the form [code]{ from_port: 0, from: \"GraphNode name 0\", "
-"to_port: 1, to: \"GraphNode name 1\" }[/code]."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Gets the [HBoxContainer] that contains the zooming and grid snap controls in "
-"the top left of the graph. You can use this method to reposition the toolbar "
-"or to add your own custom controls to it.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Returns [code]true[/code] if the [code]from_port[/code] slot of the "
-"[code]from[/code] GraphNode is connected to the [code]to_port[/code] slot of "
-"the [code]to[/code] GraphNode."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Returns whether it's possible to connect slots of the specified types."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Makes it not possible to connect between two different slot types. The type "
-"is defined with the [method GraphNode.set_slot] method."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Removes the possibility to disconnect nodes when dragging from the slot at "
-"the left if it has the specified type."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Removes the possibility to disconnect nodes when dragging from the slot at "
-"the right if it has the specified type."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Sets the coloration of the connection between [code]from[/code]'s "
-"[code]from_port[/code] and [code]to[/code]'s [code]to_port[/code] with the "
-"color provided in the [code]activity[/code] theme property."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Sets the specified [code]node[/code] as the one selected."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-#, fuzzy
-msgid "If [code]true[/code], the minimap is visible."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/GraphEdit.xml
-msgid "The opacity of the minimap rectangle."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"The size of the minimap rectangle. The map itself is based on the size of "
-"the grid area and is scaled to fit this rectangle."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"If [code]true[/code], enables disconnection of existing connections in the "
-"GraphEdit by dragging the right end."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The scroll offset."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"If [code]true[/code], makes a label with the current zoom level visible. The "
-"zoom value is displayed in percents."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The snapping distance in pixels."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "If [code]true[/code], enables snapping."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The current zoom value."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The upper zoom limit."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The lower zoom limit."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The step of each zoom level."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Emitted at the beginning of a GraphNode movement."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Emitted at the end of a GraphNode movement."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted when user dragging connection from input port into empty space of "
-"the graph."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted to the GraphEdit when the connection between the [code]from_slot[/"
-"code] slot of the [code]from[/code] GraphNode and the [code]to_slot[/code] "
-"slot of the [code]to[/code] GraphNode is attempted to be created."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted when user dragging connection from output port into empty space of "
-"the graph."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-#, fuzzy
-msgid "Emitted when the user presses [code]Ctrl + C[/code]."
-msgstr "Gesendet wenn das Rechteck Element geändert wurde."
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted when a GraphNode is attempted to be removed from the GraphEdit. "
-"Provides a list of node names to be removed (all selected nodes, excluding "
-"nodes without closing button)."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted to the GraphEdit when the connection between [code]from_slot[/code] "
-"slot of [code]from[/code] GraphNode and [code]to_slot[/code] slot of "
-"[code]to[/code] GraphNode is attempted to be removed."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted when a GraphNode is attempted to be duplicated in the GraphEdit."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Emitted when a GraphNode is selected."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-#, fuzzy
-msgid "Emitted when the user presses [code]Ctrl + V[/code]."
-msgstr "Gesendet wenn das Rechteck Element geändert wurde."
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted when a popup is requested. Happens on right-clicking in the "
-"GraphEdit. [code]position[/code] is the position of the mouse pointer when "
-"the signal is sent."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"Emitted when the scroll offset is changed by the user. It will not be "
-"emitted when changed in code."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Color of major grid lines."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "Color of minor grid lines."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The fill color of the selection rectangle."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The outline color of the selection rectangle."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid ""
-"The horizontal range within which a port can be grabbed (on both sides)."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The vertical range within which a port can be grabbed (on both sides)."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The icon for the zoom out button."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The icon for the zoom in button."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The icon for the zoom reset button."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The icon for the snap toggle button."
-msgstr ""
-
-#: doc/classes/GraphEdit.xml
-msgid "The background drawn under the grid."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"A GraphNode is a container with potentially several input and output slots "
-"allowing connections between GraphNodes. Slots can have different, "
-"incompatible types."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"A GraphNode is a container. Each GraphNode can have several input and output "
-"slots, sometimes referred to as ports, allowing connections between "
-"GraphNodes. To add a slot to GraphNode, add any [Control]-derived child node "
-"to it.\n"
-"After adding at least one child to GraphNode new sections will be "
-"automatically created in the Inspector called 'Slot'. When 'Slot' is "
-"expanded you will see list with index number for each slot. You can click on "
-"each of them to expand further.\n"
-"In the Inspector you can enable (show) or disable (hide) slots. By default, "
-"all slots are disabled so you may not see any slots on your GraphNode "
-"initially. You can assign a type to each slot. Only slots of the same type "
-"will be able to connect to each other. You can also assign colors to slots. "
-"A tuple of input and output slots is defined for each GUI element included "
-"in the GraphNode. Input connections are on the left and output connections "
-"are on the right side of GraphNode. Only enabled slots are counted as "
-"connections."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Disables all input and output slots of the GraphNode."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Disables input and output slot whose index is [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid "Returns the [Color] of the input connection [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Returns the number of enabled input slots (connections) to the GraphNode."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Returns the position of the input connection [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Returns the type of the input connection [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid "Returns the [Color] of the output connection [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Returns the number of enabled output slots (connections) of the GraphNode."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Returns the position of the output connection [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Returns the type of the output connection [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid "Returns the left (input) [Color] of the slot [code]idx[/code]."
-msgstr "Gibt die Projektion dieses Vektors auf [code]b[/code] zurück."
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid "Returns the right (output) [Color] of the slot [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid "Returns the left (input) type of the slot [code]idx[/code]."
-msgstr "Gibt die Projektion dieses Vektors auf [code]b[/code] zurück."
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid "Returns the right (output) type of the slot [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if left (input) side of the slot [code]idx[/code] "
-"is enabled."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur bei Index [code]idx[/code] "
-"aktiviert ist."
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if right (output) side of the slot [code]idx[/"
-"code] is enabled."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur bei Index [code]idx[/code] "
-"aktiviert ist."
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Sets properties of the slot with ID [code]idx[/code].\n"
-"If [code]enable_left[/code]/[code]right[/code], a port will appear and the "
-"slot will be able to be connected from this side.\n"
-"[code]type_left[/code]/[code]right[/code] is an arbitrary type of the port. "
-"Only ports with the same type values can be connected.\n"
-"[code]color_left[/code]/[code]right[/code] is the tint of the port's icon on "
-"this side.\n"
-"[code]custom_left[/code]/[code]right[/code] is a custom texture for this "
-"side's port.\n"
-"[b]Note:[/b] This method only sets properties of the slot. To create the "
-"slot, add a [Control]-derived child to the GraphNode.\n"
-"Individual properties can be set using one of the [code]set_slot_*[/code] "
-"methods. You must enable at least one side of the slot to do so."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Sets the [Color] of the left (input) side of the slot [code]idx[/code] to "
-"[code]color_left[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Sets the [Color] of the right (output) side of the slot [code]idx[/code] to "
-"[code]color_right[/code]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Toggles the left (input) side of the slot [code]idx[/code]. If "
-"[code]enable_left[/code] is [code]true[/code], a port will appear on the "
-"left side and the slot will be able to be connected from this side."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Toggles the right (output) side of the slot [code]idx[/code]. If "
-"[code]enable_right[/code] is [code]true[/code], a port will appear on the "
-"right side and the slot will be able to be connected from this side."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid ""
-"Sets the left (input) type of the slot [code]idx[/code] to [code]type_left[/"
-"code]."
-msgstr ""
-"Benennt eine vorhandene Animation mit der Taste [code]name[/code] in "
-"[code]newname[/code] um."
-
-#: doc/classes/GraphNode.xml
-#, fuzzy
-msgid ""
-"Sets the right (output) type of the slot [code]idx[/code] to "
-"[code]type_right[/code]."
-msgstr ""
-"Ändert die Indexposition der Spur [code]idx[/code] auf die in [code]to_idx[/"
-"code] definierte."
-
-#: doc/classes/GraphNode.xml
-msgid "If [code]true[/code], the GraphNode is a comment node."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"The offset of the GraphNode, relative to the scroll offset of the "
-"[GraphEdit].\n"
-"[b]Note:[/b] You cannot use position directly, as [GraphEdit] is a "
-"[Container]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Sets the overlay shown above the GraphNode. See [enum Overlay]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"If [code]true[/code], the user can resize the GraphNode.\n"
-"[b]Note:[/b] Dragging the handle will only emit the [signal resize_request] "
-"signal, the GraphNode needs to be resized manually."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "If [code]true[/code], the GraphNode is selected."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"If [code]true[/code], the close button will be visible.\n"
-"[b]Note:[/b] Pressing it will only emit the [signal close_request] signal, "
-"the GraphNode needs to be removed manually."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The text displayed in the GraphNode's title bar."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Emitted when the GraphNode is requested to be closed. Happens on clicking "
-"the close button (see [member show_close])."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Emitted when the GraphNode is dragged."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Emitted when the GraphNode is moved."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Emitted when the GraphNode is requested to be displayed over other ones. "
-"Happens on focusing (clicking into) the GraphNode."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"Emitted when the GraphNode is requested to be resized. Happens on dragging "
-"the resizer handle (see [member resizable])."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Emitted when any GraphNode's slot is updated."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "No overlay is shown."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Show overlay set in the [code]breakpoint[/code] theme property."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Show overlay set in the [code]position[/code] theme property."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The color modulation applied to the close button icon."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The color modulation applied to the resizer icon."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Color of the title text."
-msgstr ""
-
-#: doc/classes/GraphNode.xml doc/classes/WindowDialog.xml
-msgid "The vertical offset of the close button."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Horizontal offset for the ports."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The vertical distance between ports."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Vertical offset of the title text."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "Font used for the title text."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"The icon for the close button, visible when [member show_close] is enabled."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The icon used for representing ports."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The icon used for resizer, visible when [member resizable] is enabled."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"The background used when [member overlay] is set to [constant "
-"OVERLAY_BREAKPOINT]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The [StyleBox] used when [member comment] is enabled."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"The [StyleBox] used when [member comment] is enabled and the [GraphNode] is "
-"focused."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The default background for [GraphNode]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid ""
-"The background used when [member overlay] is set to [constant "
-"OVERLAY_POSITION]."
-msgstr ""
-
-#: doc/classes/GraphNode.xml
-msgid "The background used when the [GraphNode] is selected."
-msgstr ""
-
-#: doc/classes/GridContainer.xml
-msgid ""
-"Grid container used to arrange Control-derived children in a grid like "
-"layout."
-msgstr ""
-
-#: doc/classes/GridContainer.xml
-msgid ""
-"GridContainer will arrange its Control-derived children in a grid like "
-"structure, the grid columns are specified using the [member columns] "
-"property and the number of rows will be equal to the number of children in "
-"the container divided by the number of columns. For example, if the "
-"container has 5 children, and 2 columns, there will be 3 rows in the "
-"container.\n"
-"Notice that grid layout will preserve the columns and rows for every size of "
-"the container, and that empty columns will be expanded automatically.\n"
-"[b]Note:[/b] GridContainer only works with child nodes inheriting from "
-"Control. It won't rearrange child nodes inheriting from Node2D."
-msgstr ""
-
-#: doc/classes/GridContainer.xml
-msgid ""
-"The number of columns in the [GridContainer]. If modified, [GridContainer] "
-"reorders its Control-derived children to accommodate the new layout."
-msgstr ""
-
-#: doc/classes/GridContainer.xml doc/classes/HFlowContainer.xml
-#: doc/classes/VFlowContainer.xml
-msgid "The horizontal separation of children nodes."
-msgstr ""
-
-#: doc/classes/GridContainer.xml doc/classes/HFlowContainer.xml
-#: doc/classes/VFlowContainer.xml
-msgid "The vertical separation of children nodes."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Node for 3D tile-based maps."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"GridMap lets you place meshes on a grid interactively. It works both from "
-"the editor and from scripts, which can help you create in-game level "
-"editors.\n"
-"GridMaps use a [MeshLibrary] which contains a list of tiles. Each tile is a "
-"mesh with materials plus optional collision and navigation shapes.\n"
-"A GridMap contains a collection of cells. Each grid cell refers to a tile in "
-"the [MeshLibrary]. All cells in the map have the same dimensions.\n"
-"Internally, a GridMap is split into a sparse collection of octants for "
-"efficient rendering and physics processing. Every octant has the same "
-"dimensions and can contain several cells.\n"
-"[b]Note:[/b] GridMap doesn't extend [VisualInstance] and therefore can't be "
-"hidden or cull masked based on [member VisualInstance.layers]. If you make a "
-"light not affect the first layer, the whole GridMap won't be lit by the "
-"light in question."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Using gridmaps"
-msgstr "Verwendung von Gridmaps"
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Clear all cells."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Returns an array of [ArrayMesh]es and [Transform] references of all bake "
-"meshes that exist within the current GridMap."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The [MeshLibrary] item index located at the grid-based X, Y and Z "
-"coordinates. If the cell is empty, [constant INVALID_CELL_ITEM] will be "
-"returned."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The orientation of the cell at the grid-based X, Y and Z coordinates. -1 is "
-"returned if the cell is empty."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Returns an individual bit on the [member collision_layer]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Returns an individual bit on the [member collision_mask]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Returns an array of [Transform] and [Mesh] references corresponding to the "
-"non-empty cells in the grid. The transforms are specified in world space."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Returns an array of [Vector3] with the non-empty cell coordinates in the "
-"grid map."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-#, fuzzy
-msgid ""
-"Returns an array of all cells with the given item index specified in "
-"[code]item[/code]."
-msgstr ""
-"Gibt ein Array aller Zellen mit der angegebenen Kachel [code]index[/code] "
-"zurück."
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Returns the position of a grid cell in the GridMap's local coordinate space."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Sets the mesh index for the cell referenced by its grid-based X, Y and Z "
-"coordinates.\n"
-"A negative item index such as [constant INVALID_CELL_ITEM] will clear the "
-"cell.\n"
-"Optionally, the item's orientation can be passed. For valid orientation "
-"values, see [method Basis.get_orthogonal_index]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Sets an individual bit on the [member collision_layer]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Sets an individual bit on the [member collision_mask]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Returns the coordinates of the grid cell containing the given point.\n"
-"[code]pos[/code] should be in the GridMap's local coordinate space."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], this GridMap uses cell navmesh resources to create "
-"navigation regions."
-msgstr ""
-"Wenn [code]true[/code], aktualisiert Animationen als Reaktion auf "
-"prozessbezogene Benachrichtigungen."
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "If [code]true[/code], grid items are centered on the X axis."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "If [code]true[/code], grid items are centered on the Y axis."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "If [code]true[/code], grid items are centered on the Z axis."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The size of each octant measured in number of cells. This applies to all "
-"three axis."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The scale of the cell items.\n"
-"This does not affect the size of the grid cells themselves, only the items "
-"in them. This can be used to make cell items overlap their neighbors."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The dimensions of the grid's cells.\n"
-"This does not affect the size of the meshes. See [member cell_scale]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The physics layers this GridMap is in.\n"
-"GridMaps act as static bodies, meaning they aren't affected by gravity or "
-"other forces. They only affect other physics bodies that collide with them."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"The physics layers this GridMap detects collisions in. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "The assigned [MeshLibrary]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "The navigation layers the GridMap generates its navigation regions in."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Overrides the default friction and bounce physics properties for the whole "
-"[GridMap]."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Controls whether this GridMap will be baked in a [BakedLightmap] or not."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid "Emitted when [member cell_size] changes."
-msgstr ""
-
-#: modules/gridmap/doc_classes/GridMap.xml
-msgid ""
-"Invalid cell item that can be used in [method set_cell_item] to clear cells "
-"(or represent an empty cell in [method get_cell_item])."
-msgstr ""
-
-#: doc/classes/GrooveJoint2D.xml
-msgid "Groove constraint for 2D physics."
-msgstr ""
-
-#: doc/classes/GrooveJoint2D.xml
-msgid ""
-"Groove constraint for 2D physics. This is useful for making a body \"slide\" "
-"through a segment placed in another."
-msgstr ""
-
-#: doc/classes/GrooveJoint2D.xml
-msgid ""
-"The body B's initial anchor position defined by the joint's origin and a "
-"local offset [member initial_offset] along the joint's Y axis (along the "
-"groove)."
-msgstr ""
-
-#: doc/classes/GrooveJoint2D.xml
-msgid ""
-"The groove's length. The groove is from the joint's origin towards [member "
-"length] along the joint's local Y axis."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid "Context to compute cryptographic hashes over multiple iterations."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid ""
-"The HashingContext class provides an interface for computing cryptographic "
-"hashes over multiple iterations. This is useful for example when computing "
-"hashes of big files (so you don't have to load them all in memory), network "
-"streams, and data streams in general (so you don't have to hold buffers).\n"
-"The [enum HashType] enum shows the supported hashing algorithms.\n"
-"[codeblock]\n"
-"const CHUNK_SIZE = 1024\n"
-"\n"
-"func hash_file(path):\n"
-"    var ctx = HashingContext.new()\n"
-"    var file = File.new()\n"
-"    # Start a SHA-256 context.\n"
-"    ctx.start(HashingContext.HASH_SHA256)\n"
-"    # Check that file exists.\n"
-"    if not file.file_exists(path):\n"
-"        return\n"
-"    # Open the file to hash.\n"
-"    file.open(path, File.READ)\n"
-"    # Update the context after reading each chunk.\n"
-"    while not file.eof_reached():\n"
-"        ctx.update(file.get_buffer(CHUNK_SIZE))\n"
-"    # Get the computed hash.\n"
-"    var res = ctx.finish()\n"
-"    # Print the result as hex string and array.\n"
-"    printt(res.hex_encode(), Array(res))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid "Closes the current context, and return the computed hash."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid ""
-"Starts a new hash computation of the given [code]type[/code] (e.g. [constant "
-"HASH_SHA256] to start computation of a SHA-256)."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid "Updates the computation with the given [code]chunk[/code] of data."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid "Hashing algorithm: MD5."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid "Hashing algorithm: SHA-1."
-msgstr ""
-
-#: doc/classes/HashingContext.xml
-msgid "Hashing algorithm: SHA-256."
-msgstr ""
-
-#: doc/classes/HBoxContainer.xml
-msgid "Horizontal box container."
-msgstr ""
-
-#: doc/classes/HBoxContainer.xml
-msgid "Horizontal box container. See [BoxContainer]."
-msgstr ""
-
-#: doc/classes/HBoxContainer.xml
-msgid "The horizontal space between the [HBoxContainer]'s elements."
-msgstr ""
-
-#: doc/classes/HeightMapShape.xml
-msgid "Height map shape for 3D physics."
-msgstr ""
-
-#: doc/classes/HeightMapShape.xml
-msgid ""
-"Height map shape resource, which can be added to a [PhysicsBody] or [Area]."
-msgstr ""
-
-#: doc/classes/HeightMapShape.xml
-msgid ""
-"Height map data, pool array must be of [member map_width] * [member "
-"map_depth] size."
-msgstr ""
-
-#: doc/classes/HeightMapShape.xml
-msgid ""
-"Number of vertices in the depth of the height map. Changing this will resize "
-"the [member map_data]."
-msgstr ""
-
-#: doc/classes/HeightMapShape.xml
-msgid ""
-"Number of vertices in the width of the height map. Changing this will resize "
-"the [member map_data]."
-msgstr ""
-
-#: doc/classes/HFlowContainer.xml
-msgid "Horizontal flow container."
-msgstr ""
-
-#: doc/classes/HFlowContainer.xml
-msgid "Horizontal version of [FlowContainer]."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid "A hinge between two 3D PhysicsBodies."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid ""
-"A HingeJoint normally uses the Z axis of body A as the hinge axis, another "
-"axis can be specified when adding it manually though. See also "
-"[Generic6DOFJoint]."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/Label3D.xml
-#: doc/classes/SpriteBase3D.xml
-msgid "Returns the value of the specified flag."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/ParticlesMaterial.xml
-#: doc/classes/PinJoint.xml
-msgid "Returns the value of the specified parameter."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid "If [code]true[/code], enables the specified flag."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/PinJoint.xml
-msgid "Sets the value of the specified parameter."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The speed with which the rotation across the axis perpendicular to the hinge "
-"gets corrected."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid ""
-"If [code]true[/code], the hinges maximum and minimum rotation, defined by "
-"[member angular_limit/lower] and [member angular_limit/upper] has effects."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid ""
-"The minimum rotation. Only active if [member angular_limit/enable] is "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/PhysicsServer.xml
-msgid "The lower this value, the more the rotation gets slowed down."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid ""
-"The maximum rotation. Only active if [member angular_limit/enable] is "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml
-msgid "When activated, a motor turns the hinge."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/PhysicsServer.xml
-msgid "Maximum acceleration for the motor."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/PhysicsServer.xml
-msgid "Target speed for the motor."
-msgstr ""
-
-#: doc/classes/HingeJoint.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The speed with which the two bodies get pulled together when they move in "
-"different directions."
-msgstr ""
-
-#: doc/classes/HMACContext.xml
-msgid "Used to create an HMAC for a message using a key."
-msgstr ""
-
-#: doc/classes/HMACContext.xml
-msgid ""
-"The HMACContext class is useful for advanced HMAC use cases, such as "
-"streaming the message as it supports creating the message over time rather "
-"than providing it all at once.\n"
-"[codeblock]\n"
-"extends Node\n"
-"var ctx = HMACContext.new()\n"
-"\n"
-"func _ready():\n"
-"    var key = \"supersecret\".to_utf8()\n"
-"    var err = ctx.start(HashingContext.HASH_SHA256, key)\n"
-"    assert(err == OK)\n"
-"    var msg1 = \"this is \".to_utf8()\n"
-"    var msg2 = \"super duper secret\".to_utf8()\n"
-"    err = ctx.update(msg1)\n"
-"    assert(err == OK)\n"
-"    err = ctx.update(msg2)\n"
-"    assert(err == OK)\n"
-"    var hmac = ctx.finish()\n"
-"    print(hmac.hex_encode())\n"
-"[/codeblock]\n"
-"And in C# we can use the following.\n"
-"[codeblock]\n"
-"using Godot;\n"
-"using System;\n"
-"using System.Diagnostics;\n"
-"\n"
-"public class CryptoNode : Node\n"
-"{\n"
-"    private HMACContext ctx = new HMACContext();\n"
-"    public override void _Ready()\n"
-"    {\n"
-"        PoolByteArray key = String(\"supersecret\").to_utf8();\n"
-"        Error err = ctx.Start(HashingContext.HASH_SHA256, key);\n"
-"        GD.Assert(err == OK);\n"
-"        PoolByteArray msg1 = String(\"this is \").to_utf8();\n"
-"        PoolByteArray msg2 = String(\"super duper secret\").to_utf8();\n"
-"        err = ctx.Update(msg1);\n"
-"        GD.Assert(err == OK);\n"
-"        err = ctx.Update(msg2);\n"
-"        GD.Assert(err == OK);\n"
-"        PoolByteArray hmac = ctx.Finish();\n"
-"        GD.Print(hmac.HexEncode());\n"
-"    }\n"
-"}\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Not available in HTML5 exports."
-msgstr ""
-
-#: doc/classes/HMACContext.xml
-msgid ""
-"Returns the resulting HMAC. If the HMAC failed, an empty [PoolByteArray] is "
-"returned."
-msgstr ""
-
-#: doc/classes/HMACContext.xml
-msgid ""
-"Initializes the HMACContext. This method cannot be called again on the same "
-"HMACContext until [method finish] has been called."
-msgstr ""
-
-#: doc/classes/HMACContext.xml
-msgid ""
-"Updates the message to be HMACed. This can be called multiple times before "
-"[method finish] is called to append [code]data[/code] to the message, but "
-"cannot be called until [method start] has been called."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml
-msgid "Horizontal scroll bar."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml
-msgid ""
-"Horizontal version of [ScrollBar], which goes from left (min) to right (max)."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml
-msgid ""
-"Icon used as a button to scroll the [ScrollBar] left. Supports custom step "
-"using the [member ScrollBar.custom_step] property."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid "Displayed when the mouse cursor hovers over the decrement button."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-#, fuzzy
-msgid "Displayed when the decrement button is being pressed."
-msgstr ""
-"Wird ausgegeben, wenn der Dialog akzeptiert wird, d. h. die Schaltfläche OK "
-"gedrückt wird."
-
-#: doc/classes/HScrollBar.xml
-msgid ""
-"Icon used as a button to scroll the [ScrollBar] right. Supports custom step "
-"using the [member ScrollBar.custom_step] property."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid "Displayed when the mouse cursor hovers over the increment button."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-#, fuzzy
-msgid "Displayed when the increment button is being pressed."
-msgstr ""
-"Wird ausgegeben, wenn der Dialog akzeptiert wird, d. h. die Schaltfläche OK "
-"gedrückt wird."
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid ""
-"Used as texture for the grabber, the draggable element representing current "
-"scroll."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid "Used when the mouse hovers over the grabber."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid "Used when the grabber is being dragged."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid "Used as background of this [ScrollBar]."
-msgstr ""
-
-#: doc/classes/HScrollBar.xml doc/classes/VScrollBar.xml
-msgid "Used as background when the [ScrollBar] has the GUI focus."
-msgstr ""
-
-#: doc/classes/HSeparator.xml
-msgid "Horizontal separator."
-msgstr ""
-
-#: doc/classes/HSeparator.xml
-msgid ""
-"Horizontal separator. See [Separator]. Even though it looks horizontal, it "
-"is used to separate objects vertically."
-msgstr ""
-
-#: doc/classes/HSeparator.xml
-msgid ""
-"The height of the area covered by the separator. Effectively works like a "
-"minimum height."
-msgstr ""
-
-#: doc/classes/HSeparator.xml
-msgid "The style for the separator line. Works best with [StyleBoxLine]."
-msgstr ""
-
-#: doc/classes/HSlider.xml
-msgid "Horizontal slider."
-msgstr ""
-
-#: doc/classes/HSlider.xml
-msgid ""
-"Horizontal slider. See [Slider]. This one goes from left (min) to right "
-"(max).\n"
-"[b]Note:[/b] The [signal Range.changed] and [signal Range.value_changed] "
-"signals are part of the [Range] class which this class inherits from."
-msgstr ""
-
-#: doc/classes/HSlider.xml doc/classes/VSlider.xml
-msgid "The texture for the grabber (the draggable element)."
-msgstr ""
-
-#: doc/classes/HSlider.xml doc/classes/VSlider.xml
-msgid "The texture for the grabber when it's disabled."
-msgstr ""
-
-#: doc/classes/HSlider.xml doc/classes/VSlider.xml
-msgid "The texture for the grabber when it's focused."
-msgstr ""
-
-#: doc/classes/HSlider.xml doc/classes/VSlider.xml
-msgid ""
-"The texture for the ticks, visible when [member Slider.tick_count] is "
-"greater than 0."
-msgstr ""
-
-#: doc/classes/HSlider.xml
-msgid "The background of the area to the left of the grabber."
-msgstr ""
-
-#: doc/classes/HSlider.xml
-msgid ""
-"The background for the whole slider. Determines the height of the "
-"[code]grabber_area[/code]."
-msgstr ""
-
-#: doc/classes/HSplitContainer.xml
-msgid "Horizontal split container."
-msgstr ""
-
-#: doc/classes/HSplitContainer.xml
-msgid ""
-"Horizontal split container. See [SplitContainer]. This goes from left to "
-"right."
-msgstr ""
-
-#: doc/classes/HSplitContainer.xml doc/classes/VSplitContainer.xml
-msgid ""
-"Boolean value. If 1 ([code]true[/code]), the grabber will hide automatically "
-"when it isn't under the cursor. If 0 ([code]false[/code]), it's always "
-"visible."
-msgstr ""
-
-#: doc/classes/HSplitContainer.xml doc/classes/VSplitContainer.xml
-msgid "The space between sides of the container."
-msgstr ""
-
-#: doc/classes/HSplitContainer.xml doc/classes/VSplitContainer.xml
-msgid "The icon used for the grabber drawn in the middle area."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Low-level hyper-text transfer protocol client."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Hyper-text transfer protocol client (sometimes called \"User Agent\"). Used "
-"to make HTTP requests to download web content, upload files and other data "
-"or to communicate with various services, among other use cases.\n"
-"See the [HTTPRequest] node for a higher-level alternative.\n"
-"[b]Note:[/b] This client only needs to connect to a host once (see [method "
-"connect_to_host]) to send multiple requests. Because of this, methods that "
-"take URLs usually take just the part after the host instead of the full URL, "
-"as the client is already connected to a host. See [method request] for a "
-"full example and to get started.\n"
-"A [HTTPClient] should be reused between multiple requests or to connect to "
-"different hosts instead of creating one client per request. Supports SSL and "
-"SSL server certificate verification. HTTP status codes in the 2xx range "
-"indicate success, 3xx redirection (i.e. \"try again, but over here\"), 4xx "
-"something was wrong with the request, and 5xx something went wrong on the "
-"server's side.\n"
-"For more information on HTTP, see https://developer.mozilla.org/en-US/docs/"
-"Web/HTTP (or read RFC 2616 to get it straight from the source: https://tools."
-"ietf.org/html/rfc2616).\n"
-"[b]Note:[/b] When performing HTTP requests from a project exported to HTML5, "
-"keep in mind the remote server may not allow requests from foreign origins "
-"due to [url=https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS]CORS[/"
-"url]. If you host the server in question, you should modify its backend to "
-"allow requests from foreign origins by adding the [code]Access-Control-Allow-"
-"Origin: *[/code] HTTP header.\n"
-"[b]Note:[/b] SSL/TLS support is currently limited to TLS 1.0, TLS 1.1, and "
-"TLS 1.2. Attempting to connect to a TLS 1.3-only server will return an "
-"error.\n"
-"[b]Warning:[/b] SSL/TLS certificate revocation and certificate pinning are "
-"currently not supported. Revoked certificates are accepted as long as they "
-"are otherwise valid. If this is a concern, you may want to use automatically "
-"managed certificates with a short validity period."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Closes the current connection, allowing reuse of this [HTTPClient]."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Connects to a host. This needs to be done before any requests are sent.\n"
-"The host should not have http:// prepended but will strip the protocol "
-"identifier if provided.\n"
-"If no [code]port[/code] is specified (or [code]-1[/code] is used), it is "
-"automatically set to 80 for HTTP and 443 for HTTPS (if [code]use_ssl[/code] "
-"is enabled).\n"
-"[code]verify_host[/code] will check the SSL identity of the host if set to "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Returns the response's body length.\n"
-"[b]Note:[/b] Some Web servers may not send a body length. In this case, the "
-"value returned will be [code]-1[/code]. If using chunked transfer encoding, "
-"the body length will also be [code]-1[/code]."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Returns the response's HTTP status code."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Returns the response headers."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Returns all response headers as a Dictionary of structure [code]{ \"key\": "
-"\"value1; value2\" }[/code] where the case-sensitivity of the keys and "
-"values is kept like the server delivers it. A value is a simple String, this "
-"string can have more than one value where \"; \" is used as separator.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"{\n"
-"    \"content-length\": 12,\n"
-"    \"Content-Type\": \"application/json; charset=UTF-8\",\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Returns a [enum Status] constant. Need to call [method poll] in order to get "
-"status updates."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "If [code]true[/code], this [HTTPClient] has a response available."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "If [code]true[/code], this [HTTPClient] has a response that is chunked."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"This needs to be called in order to have any request processed. Check "
-"results with [method get_status]."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Generates a GET/POST application/x-www-form-urlencoded style query string "
-"from a provided dictionary, e.g.:\n"
-"[codeblock]\n"
-"var fields = {\"username\": \"user\", \"password\": \"pass\"}\n"
-"var query_string = http_client.query_string_from_dict(fields)\n"
-"# Returns \"username=user&password=pass\"\n"
-"[/codeblock]\n"
-"Furthermore, if a key has a [code]null[/code] value, only the key itself is "
-"added, without equal sign and value. If the value is an array, for each "
-"value in it a pair with the same key is added.\n"
-"[codeblock]\n"
-"var fields = {\"single\": 123, \"not_valued\": null, \"multiple\": [22, 33, "
-"44]}\n"
-"var query_string = http_client.query_string_from_dict(fields)\n"
-"# Returns \"single=123&not_valued&multiple=22&multiple=33&multiple=44\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Reads one chunk from the response."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Sends a request to the connected host.\n"
-"The URL parameter is usually just the part after the host, so for "
-"[code]http://somehost.com/index.php[/code], it is [code]/index.php[/code]. "
-"When sending requests to an HTTP proxy server, it should be an absolute URL. "
-"For [constant HTTPClient.METHOD_OPTIONS] requests, [code]*[/code] is also "
-"allowed. For [constant HTTPClient.METHOD_CONNECT] requests, it should be the "
-"authority component ([code]host:port[/code]).\n"
-"Headers are HTTP request headers. For available HTTP methods, see [enum "
-"Method].\n"
-"To create a POST request with query strings to push to the server, do:\n"
-"[codeblock]\n"
-"var fields = {\"username\" : \"user\", \"password\" : \"pass\"}\n"
-"var query_string = http_client.query_string_from_dict(fields)\n"
-"var headers = [\"Content-Type: application/x-www-form-urlencoded\", "
-"\"Content-Length: \" + str(query_string.length())]\n"
-"var result = http_client.request(http_client.METHOD_POST, \"/index.php\", "
-"headers, query_string)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] The [code]request_data[/code] parameter is ignored if "
-"[code]method[/code] is [constant HTTPClient.METHOD_GET]. This is because GET "
-"methods can't contain request data. As a workaround, you can pass request "
-"data as a query string in the URL. See [method String.http_escape] for an "
-"example."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"Sends a raw request to the connected host.\n"
-"The URL parameter is usually just the part after the host, so for "
-"[code]http://somehost.com/index.php[/code], it is [code]/index.php[/code]. "
-"When sending requests to an HTTP proxy server, it should be an absolute URL. "
-"For [constant HTTPClient.METHOD_OPTIONS] requests, [code]*[/code] is also "
-"allowed. For [constant HTTPClient.METHOD_CONNECT] requests, it should be the "
-"authority component ([code]host:port[/code]).\n"
-"Headers are HTTP request headers. For available HTTP methods, see [enum "
-"Method].\n"
-"Sends the body data raw, as a byte array and does not encode it in any way."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml doc/classes/HTTPRequest.xml
-msgid ""
-"Sets the proxy server for HTTP requests.\n"
-"The proxy server is unset if [code]host[/code] is empty or [code]port[/code] "
-"is -1."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml doc/classes/HTTPRequest.xml
-msgid ""
-"Sets the proxy server for HTTPS requests.\n"
-"The proxy server is unset if [code]host[/code] is empty or [code]port[/code] "
-"is -1."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"If [code]true[/code], execution will block until all data is read from the "
-"response."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "The connection to use for this client."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"The size of the buffer used and maximum bytes to read per iteration. See "
-"[method read_response_body_chunk]."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP GET method. The GET method requests a representation of the specified "
-"resource. Requests using GET should only retrieve data."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP HEAD method. The HEAD method asks for a response identical to that of a "
-"GET request, but without the response body. This is useful to request "
-"metadata like HTTP headers or to check if a resource exists."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP POST method. The POST method is used to submit an entity to the "
-"specified resource, often causing a change in state or side effects on the "
-"server. This is often used for forms and submitting data or uploading files."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP PUT method. The PUT method asks to replace all current representations "
-"of the target resource with the request payload. (You can think of POST as "
-"\"create or update\" and PUT as \"update\", although many services tend to "
-"not make a clear distinction or change their meaning)."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP DELETE method. The DELETE method requests to delete the specified "
-"resource."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP OPTIONS method. The OPTIONS method asks for a description of the "
-"communication options for the target resource. Rarely used."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP TRACE method. The TRACE method performs a message loop-back test along "
-"the path to the target resource. Returns the entire HTTP request received in "
-"the response body. Rarely used."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP CONNECT method. The CONNECT method establishes a tunnel to the server "
-"identified by the target resource. Rarely used."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP PATCH method. The PATCH method is used to apply partial modifications "
-"to a resource."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Represents the size of the [enum Method] enum."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Disconnected from the server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Currently resolving the hostname for the given URL into an IP."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: DNS failure: Can't resolve the hostname for the given URL."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Currently connecting to server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Can't connect to the server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Connection established."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Currently sending request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: HTTP body received."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Error in HTTP connection."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid "Status: Error in SSL handshake."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]100 Continue[/code]. Interim response that indicates "
-"everything so far is OK and that the client should continue with the request "
-"(or ignore this status if already finished)."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]101 Switching Protocol[/code]. Sent in response to an "
-"[code]Upgrade[/code] request header by the client. Indicates the protocol "
-"the server is switching to."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]102 Processing[/code] (WebDAV). Indicates that the "
-"server has received and is processing the request, but no response is "
-"available yet."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]200 OK[/code]. The request has succeeded. Default "
-"response for successful requests. Meaning varies depending on the request. "
-"GET: The resource has been fetched and is transmitted in the message body. "
-"HEAD: The entity headers are in the message body. POST: The resource "
-"describing the result of the action is transmitted in the message body. "
-"TRACE: The message body contains the request message as received by the "
-"server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]201 Created[/code]. The request has succeeded and a "
-"new resource has been created as a result of it. This is typically the "
-"response sent after a PUT request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]202 Accepted[/code]. The request has been received "
-"but not yet acted upon. It is non-committal, meaning that there is no way in "
-"HTTP to later send an asynchronous response indicating the outcome of "
-"processing the request. It is intended for cases where another process or "
-"server handles the request, or for batch processing."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]203 Non-Authoritative Information[/code]. This "
-"response code means returned meta-information set is not exact set as "
-"available from the origin server, but collected from a local or a third "
-"party copy. Except this condition, 200 OK response should be preferred "
-"instead of this response."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]204 No Content[/code]. There is no content to send "
-"for this request, but the headers may be useful. The user-agent may update "
-"its cached headers for this resource with the new ones."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]205 Reset Content[/code]. The server has fulfilled "
-"the request and desires that the client resets the \"document view\" that "
-"caused the request to be sent to its original state as received from the "
-"origin server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]206 Partial Content[/code]. This response code is "
-"used because of a range header sent by the client to separate download into "
-"multiple streams."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]207 Multi-Status[/code] (WebDAV). A Multi-Status "
-"response conveys information about multiple resources in situations where "
-"multiple status codes might be appropriate."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]208 Already Reported[/code] (WebDAV). Used inside a "
-"DAV: propstat response element to avoid enumerating the internal members of "
-"multiple bindings to the same collection repeatedly."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]226 IM Used[/code] (WebDAV). The server has fulfilled "
-"a GET request for the resource, and the response is a representation of the "
-"result of one or more instance-manipulations applied to the current instance."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]300 Multiple Choice[/code]. The request has more than "
-"one possible responses and there is no standardized way to choose one of the "
-"responses. User-agent or user should choose one of them."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]301 Moved Permanently[/code]. Redirection. This "
-"response code means the URI of requested resource has been changed. The new "
-"URI is usually included in the response."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]302 Found[/code]. Temporary redirection. This "
-"response code means the URI of requested resource has been changed "
-"temporarily. New changes in the URI might be made in the future. Therefore, "
-"this same URI should be used by the client in future requests."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]303 See Other[/code]. The server is redirecting the "
-"user agent to a different resource, as indicated by a URI in the Location "
-"header field, which is intended to provide an indirect response to the "
-"original request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]304 Not Modified[/code]. A conditional GET or HEAD "
-"request has been received and would have resulted in a 200 OK response if it "
-"were not for the fact that the condition evaluated to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]305 Use Proxy[/code]. [i]Deprecated. Do not use.[/i]"
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]306 Switch Proxy[/code]. [i]Deprecated. Do not use.[/"
-"i]"
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]307 Temporary Redirect[/code]. The target resource "
-"resides temporarily under a different URI and the user agent MUST NOT change "
-"the request method if it performs an automatic redirection to that URI."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]308 Permanent Redirect[/code]. The target resource "
-"has been assigned a new permanent URI and any future references to this "
-"resource ought to use one of the enclosed URIs."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]400 Bad Request[/code]. The request was invalid. The "
-"server cannot or will not process the request due to something that is "
-"perceived to be a client error (e.g., malformed request syntax, invalid "
-"request message framing, invalid request contents, or deceptive request "
-"routing)."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]401 Unauthorized[/code]. Credentials required. The "
-"request has not been applied because it lacks valid authentication "
-"credentials for the target resource."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]402 Payment Required[/code]. This response code is "
-"reserved for future use. Initial aim for creating this code was using it for "
-"digital payment systems, however this is not currently used."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]403 Forbidden[/code]. The client does not have access "
-"rights to the content, i.e. they are unauthorized, so server is rejecting to "
-"give proper response. Unlike [code]401[/code], the client's identity is "
-"known to the server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]404 Not Found[/code]. The server can not find "
-"requested resource. Either the URL is not recognized or the endpoint is "
-"valid but the resource itself does not exist. May also be sent instead of "
-"403 to hide existence of a resource if the client is not authorized."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]405 Method Not Allowed[/code]. The request's HTTP "
-"method is known by the server but has been disabled and cannot be used. For "
-"example, an API may forbid DELETE-ing a resource. The two mandatory methods, "
-"GET and HEAD, must never be disabled and should not return this error code."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]406 Not Acceptable[/code]. The target resource does "
-"not have a current representation that would be acceptable to the user "
-"agent, according to the proactive negotiation header fields received in the "
-"request. Used when negotiation content."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]407 Proxy Authentication Required[/code]. Similar to "
-"401 Unauthorized, but it indicates that the client needs to authenticate "
-"itself in order to use a proxy."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]408 Request Timeout[/code]. The server did not "
-"receive a complete request message within the time that it was prepared to "
-"wait."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]409 Conflict[/code]. The request could not be "
-"completed due to a conflict with the current state of the target resource. "
-"This code is used in situations where the user might be able to resolve the "
-"conflict and resubmit the request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]410 Gone[/code]. The target resource is no longer "
-"available at the origin server and this condition is likely permanent."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]411 Length Required[/code]. The server refuses to "
-"accept the request without a defined Content-Length header."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]412 Precondition Failed[/code]. One or more "
-"conditions given in the request header fields evaluated to [code]false[/"
-"code] when tested on the server."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]413 Entity Too Large[/code]. The server is refusing "
-"to process a request because the request payload is larger than the server "
-"is willing or able to process."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]414 Request-URI Too Long[/code]. The server is "
-"refusing to service the request because the request-target is longer than "
-"the server is willing to interpret."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]415 Unsupported Media Type[/code]. The origin server "
-"is refusing to service the request because the payload is in a format not "
-"supported by this method on the target resource."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]416 Requested Range Not Satisfiable[/code]. None of "
-"the ranges in the request's Range header field overlap the current extent of "
-"the selected resource or the set of ranges requested has been rejected due "
-"to invalid ranges or an excessive request of small or overlapping ranges."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]417 Expectation Failed[/code]. The expectation given "
-"in the request's Expect header field could not be met by at least one of the "
-"inbound servers."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]418 I'm A Teapot[/code]. Any attempt to brew coffee "
-"with a teapot should result in the error code \"418 I'm a teapot\". The "
-"resulting entity body MAY be short and stout."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]421 Misdirected Request[/code]. The request was "
-"directed at a server that is not able to produce a response. This can be "
-"sent by a server that is not configured to produce responses for the "
-"combination of scheme and authority that are included in the request URI."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]422 Unprocessable Entity[/code] (WebDAV). The server "
-"understands the content type of the request entity (hence a 415 Unsupported "
-"Media Type status code is inappropriate), and the syntax of the request "
-"entity is correct (thus a 400 Bad Request status code is inappropriate) but "
-"was unable to process the contained instructions."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]423 Locked[/code] (WebDAV). The source or destination "
-"resource of a method is locked."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]424 Failed Dependency[/code] (WebDAV). The method "
-"could not be performed on the resource because the requested action depended "
-"on another action and that action failed."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]426 Upgrade Required[/code]. The server refuses to "
-"perform the request using the current protocol but might be willing to do so "
-"after the client upgrades to a different protocol."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]428 Precondition Required[/code]. The origin server "
-"requires the request to be conditional."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]429 Too Many Requests[/code]. The user has sent too "
-"many requests in a given amount of time (see \"rate limiting\"). Back off "
-"and increase time between requests or try again later."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]431 Request Header Fields Too Large[/code]. The "
-"server is unwilling to process the request because its header fields are too "
-"large. The request MAY be resubmitted after reducing the size of the request "
-"header fields."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]451 Response Unavailable For Legal Reasons[/code]. "
-"The server is denying access to the resource as a consequence of a legal "
-"demand."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]500 Internal Server Error[/code]. The server "
-"encountered an unexpected condition that prevented it from fulfilling the "
-"request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]501 Not Implemented[/code]. The server does not "
-"support the functionality required to fulfill the request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]502 Bad Gateway[/code]. The server, while acting as a "
-"gateway or proxy, received an invalid response from an inbound server it "
-"accessed while attempting to fulfill the request. Usually returned by load "
-"balancers or proxies."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]503 Service Unavailable[/code]. The server is "
-"currently unable to handle the request due to a temporary overload or "
-"scheduled maintenance, which will likely be alleviated after some delay. Try "
-"again later."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]504 Gateway Timeout[/code]. The server, while acting "
-"as a gateway or proxy, did not receive a timely response from an upstream "
-"server it needed to access in order to complete the request. Usually "
-"returned by load balancers or proxies."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]505 HTTP Version Not Supported[/code]. The server "
-"does not support, or refuses to support, the major version of HTTP that was "
-"used in the request message."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]506 Variant Also Negotiates[/code]. The server has an "
-"internal configuration error: the chosen variant resource is configured to "
-"engage in transparent content negotiation itself, and is therefore not a "
-"proper end point in the negotiation process."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]507 Insufficient Storage[/code]. The method could not "
-"be performed on the resource because the server is unable to store the "
-"representation needed to successfully complete the request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]508 Loop Detected[/code]. The server terminated an "
-"operation because it encountered an infinite loop while processing a request "
-"with \"Depth: infinity\". This status indicates that the entire operation "
-"failed."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]510 Not Extended[/code]. The policy for accessing the "
-"resource has not been met in the request. The server should send back all "
-"the information necessary for the client to issue an extended request."
-msgstr ""
-
-#: doc/classes/HTTPClient.xml
-msgid ""
-"HTTP status code [code]511 Network Authentication Required[/code]. The "
-"client needs to authenticate to gain network access."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "A node with the ability to send HTTP(S) requests."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"A node with the ability to send HTTP requests. Uses [HTTPClient] "
-"internally.\n"
-"Can be used to make HTTP requests, i.e. download or upload files or web "
-"content via HTTP.\n"
-"[b]Warning:[/b] See the notes and warnings on [HTTPClient] for limitations, "
-"especially regarding SSL security.\n"
-"[b]Example of contacting a REST API and printing one of its returned fields:"
-"[/b]\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    # Create an HTTP request node and connect its completion signal.\n"
-"    var http_request = HTTPRequest.new()\n"
-"    add_child(http_request)\n"
-"    http_request.connect(\"request_completed\", self, "
-"\"_http_request_completed\")\n"
-"\n"
-"    # Perform a GET request. The URL below returns JSON as of writing.\n"
-"    var error = http_request.request(\"https://httpbin.org/get\")\n"
-"    if error != OK:\n"
-"        push_error(\"An error occurred in the HTTP request.\")\n"
-"\n"
-"    # Perform a POST request. The URL below returns JSON as of writing.\n"
-"    # Note: Don't make simultaneous requests using a single HTTPRequest "
-"node.\n"
-"    # The snippet below is provided for reference only.\n"
-"    var body = to_json({\"name\": \"Godette\"})\n"
-"    error = http_request.request(\"https://httpbin.org/post\", [], true, "
-"HTTPClient.METHOD_POST, body)\n"
-"    if error != OK:\n"
-"        push_error(\"An error occurred in the HTTP request.\")\n"
-"\n"
-"\n"
-"# Called when the HTTP request is completed.\n"
-"func _http_request_completed(result, response_code, headers, body):\n"
-"    var response = parse_json(body.get_string_from_utf8())\n"
-"\n"
-"    # Will print the user agent string used by the HTTPRequest node (as "
-"recognized by httpbin.org).\n"
-"    print(response.headers[\"User-Agent\"])\n"
-"[/codeblock]\n"
-"[b]Example of loading and displaying an image using HTTPRequest:[/b]\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    # Create an HTTP request node and connect its completion signal.\n"
-"    var http_request = HTTPRequest.new()\n"
-"    add_child(http_request)\n"
-"    http_request.connect(\"request_completed\", self, "
-"\"_http_request_completed\")\n"
-"\n"
-"    # Perform the HTTP request. The URL below returns a PNG image as of "
-"writing.\n"
-"    var error = http_request.request(\"https://via.placeholder.com/512\")\n"
-"    if error != OK:\n"
-"        push_error(\"An error occurred in the HTTP request.\")\n"
-"\n"
-"\n"
-"# Called when the HTTP request is completed.\n"
-"func _http_request_completed(result, response_code, headers, body):\n"
-"    var image = Image.new()\n"
-"    var error = image.load_png_from_buffer(body)\n"
-"    if error != OK:\n"
-"        push_error(\"Couldn't load the image.\")\n"
-"\n"
-"    var texture = ImageTexture.new()\n"
-"    texture.create_from_image(image)\n"
-"\n"
-"    # Display the image in a TextureRect node.\n"
-"    var texture_rect = TextureRect.new()\n"
-"    add_child(texture_rect)\n"
-"    texture_rect.texture = texture\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Cancels the current request."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"Returns the response body length.\n"
-"[b]Note:[/b] Some Web servers may not send a body length. In this case, the "
-"value returned will be [code]-1[/code]. If using chunked transfer encoding, "
-"the body length will also be [code]-1[/code]."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Returns the amount of bytes this HTTPRequest downloaded."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"Returns the current status of the underlying [HTTPClient]. See [enum "
-"HTTPClient.Status]."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"Creates request on the underlying [HTTPClient]. If there is no configuration "
-"errors, it tries to connect using [method HTTPClient.connect_to_host] and "
-"passes parameters onto [method HTTPClient.request].\n"
-"Returns [constant OK] if request is successfully created. (Does not imply "
-"that the server has responded), [constant ERR_UNCONFIGURED] if not in the "
-"tree, [constant ERR_BUSY] if still processing previous request, [constant "
-"ERR_INVALID_PARAMETER] if given string is not a valid URL format, or "
-"[constant ERR_CANT_CONNECT] if not using thread and the [HTTPClient] cannot "
-"connect to host.\n"
-"[b]Note:[/b] When [code]method[/code] is [constant HTTPClient.METHOD_GET], "
-"the payload sent via [code]request_data[/code] might be ignored by the "
-"server or even cause the server to reject the request (check [url=https://"
-"datatracker.ietf.org/doc/html/rfc7231#section-4.3.1]RFC 7231 section 4.3.1[/"
-"url] for more details). As a workaround, you can send data as a query string "
-"in the URL. See [method String.http_escape] for an example."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"Creates request on the underlying [HTTPClient] using a raw array of bytes "
-"for the request body. If there is no configuration errors, it tries to "
-"connect using [method HTTPClient.connect_to_host] and passes parameters onto "
-"[method HTTPClient.request].\n"
-"Returns [constant OK] if request is successfully created. (Does not imply "
-"that the server has responded), [constant ERR_UNCONFIGURED] if not in the "
-"tree, [constant ERR_BUSY] if still processing previous request, [constant "
-"ERR_INVALID_PARAMETER] if given string is not a valid URL format, or "
-"[constant ERR_CANT_CONNECT] if not using thread and the [HTTPClient] cannot "
-"connect to host."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"Maximum allowed size for response bodies ([code]-1[/code] means no limit). "
-"When only small files are expected, this can be used to prevent disallow "
-"receiving files that are too large, preventing potential denial of service "
-"attacks."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"The size of the buffer used and maximum bytes to read per iteration. See "
-"[member HTTPClient.read_chunk_size].\n"
-"Set this to a lower value (e.g. 4096 for 4 KiB) when downloading small files "
-"to decrease memory usage at the cost of download speeds."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"The file to download into. If set to a non-empty string, the request output "
-"will be written to the file located at the path. If a file already exists at "
-"the specified location, it will be overwritten as soon as body data begins "
-"to be received.\n"
-"[b]Note:[/b] Folders are not automatically created when the file is created. "
-"If [member download_file] points to a subfolder, it's recommended to create "
-"the necessary folders beforehand using [method Directory.make_dir_recursive] "
-"to ensure the file can be written."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"Maximum number of allowed redirects. This is used to prevent endless "
-"redirect loops."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid ""
-"If set to a value greater than [code]0.0[/code] before the request starts, "
-"the HTTP request will time out after [code]timeout[/code] seconds have "
-"passed and the request is not [i]completed[/i] yet. For small HTTP requests "
-"such as REST API usage, set [member timeout] to a value between [code]10.0[/"
-"code] and [code]30.0[/code] to prevent the application from getting stuck if "
-"the request fails to get a response in a timely manner. For file downloads, "
-"leave this to [code]0.0[/code] to prevent the download from failing if it "
-"takes too much time."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "If [code]true[/code], multithreading is used to improve performance."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Emitted when a request is completed."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request successful."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request failed while connecting."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request failed while resolving."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request failed due to connection (read/write) error."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request failed on SSL handshake."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request does not have a response (yet)."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request exceeded its maximum size limit, see [member body_size_limit]."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request failed (currently unused)."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "HTTPRequest couldn't open the download file."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "HTTPRequest couldn't write to the download file."
-msgstr ""
-
-#: doc/classes/HTTPRequest.xml
-msgid "Request reached its maximum redirect limit, see [member max_redirects]."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Image datatype."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Native image datatype. Contains image data which can be converted to an "
-"[ImageTexture] and provides commonly used [i]image processing[/i] methods. "
-"The maximum width and height for an [Image] are [constant MAX_WIDTH] and "
-"[constant MAX_HEIGHT].\n"
-"An [Image] cannot be assigned to a [code]texture[/code] property of an "
-"object directly (such as [Sprite]), and has to be converted manually to an "
-"[ImageTexture] first.\n"
-"[b]Note:[/b] The maximum image size is 16384×16384 pixels due to graphics "
-"hardware limitations. Larger images may fail to import."
-msgstr ""
-
-#: doc/classes/Image.xml doc/classes/ImageTexture.xml
-msgid "Importing images"
-msgstr "Importieren von Bildern"
-
-#: doc/classes/Image.xml
-msgid ""
-"Alpha-blends [code]src_rect[/code] from [code]src[/code] image to this image "
-"at coordinates [code]dest[/code], clipped accordingly to both image bounds. "
-"This image and [code]src[/code] image [b]must[/b] have the same format. "
-"[code]src_rect[/code] with not positive size is treated as empty."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Alpha-blends [code]src_rect[/code] from [code]src[/code] image to this image "
-"using [code]mask[/code] image at coordinates [code]dst[/code], clipped "
-"accordingly to both image bounds. Alpha channels are required for both "
-"[code]src[/code] and [code]mask[/code]. [code]dst[/code] pixels and "
-"[code]src[/code] pixels will blend if the corresponding mask pixel's alpha "
-"value is not 0. This image and [code]src[/code] image [b]must[/b] have the "
-"same format. [code]src[/code] image and [code]mask[/code] image [b]must[/b] "
-"have the same size (width and height) but they can have different formats. "
-"[code]src_rect[/code] with not positive size is treated as empty."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Copies [code]src_rect[/code] from [code]src[/code] image to this image at "
-"coordinates [code]dst[/code], clipped accordingly to both image bounds. This "
-"image and [code]src[/code] image [b]must[/b] have the same format. "
-"[code]src_rect[/code] with not positive size is treated as empty."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Blits [code]src_rect[/code] area from [code]src[/code] image to this image "
-"at the coordinates given by [code]dst[/code], clipped accordingly to both "
-"image bounds. [code]src[/code] pixel is copied onto [code]dst[/code] if the "
-"corresponding [code]mask[/code] pixel's alpha value is not 0. This image and "
-"[code]src[/code] image [b]must[/b] have the same format. [code]src[/code] "
-"image and [code]mask[/code] image [b]must[/b] have the same size (width and "
-"height) but they can have different formats. [code]src_rect[/code] with not "
-"positive size is treated as empty."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Converts a bumpmap to a normalmap. A bumpmap provides a height offset per-"
-"pixel, while a normalmap provides a normal direction per pixel."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Removes the image's mipmaps."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Compresses the image to use less memory. Can not directly access pixel data "
-"while the image is compressed. Returns error if the chosen compression mode "
-"is not available. See [enum CompressMode] and [enum CompressSource] "
-"constants."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Converts the image's format. See [enum Format] constants."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Copies [code]src[/code] image to this image."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Creates an empty image of given size and format. See [enum Format] "
-"constants. If [code]use_mipmaps[/code] is [code]true[/code] then generate "
-"mipmaps for this image. See the [method generate_mipmaps]."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Creates a new image of given size and format. See [enum Format] constants. "
-"Fills the image with the given raw data. If [code]use_mipmaps[/code] is "
-"[code]true[/code] then loads mipmaps for this image from [code]data[/code]. "
-"See [method generate_mipmaps]."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Crops the image to the given [code]width[/code] and [code]height[/code]. If "
-"the specified size is larger than the current size, the extra area is filled "
-"with black pixels."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Decompresses the image if it is compressed. Returns an error if decompress "
-"function is not available."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns [constant ALPHA_BLEND] if the image has data for alpha values. "
-"Returns [constant ALPHA_BIT] if all the alpha values are stored in a single "
-"bit. Returns [constant ALPHA_NONE] if no data for alpha values is found."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Stretches the image and enlarges it by a factor of 2. No interpolation is "
-"done."
-msgstr ""
-
-#: doc/classes/Image.xml
-#, fuzzy
-msgid "Fills the image with [code]color[/code]."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/Image.xml
-#, fuzzy
-msgid "Fills [code]rect[/code] with [code]color[/code]."
-msgstr "Logischer ODER-Operator ([code]oder[/code] oder [code]||[/code])."
-
-#: doc/classes/Image.xml
-msgid "Blends low-alpha pixels with nearby pixels."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Flips the image horizontally."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Flips the image vertically."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Generates mipmaps for the image. Mipmaps are precalculated lower-resolution "
-"copies of the image that are automatically used if the image needs to be "
-"scaled down when rendered. They help improve image quality and performance "
-"when rendering. This method returns an error if the image is compressed, in "
-"a custom format, or if the image's width/height is [code]0[/code].\n"
-"[b]Note:[/b] Mipmap generation is done on the CPU, is single-threaded and is "
-"[i]always[/i] done on the main thread. This means generating mipmaps will "
-"result in noticeable stuttering during gameplay, even if [method "
-"generate_mipmaps] is called from a [Thread]."
-msgstr ""
-
-#: doc/classes/Image.xml
-#, fuzzy
-msgid "Returns a copy of the image's raw data."
-msgstr "Gibt den Kosinus des Parameters zurück."
-
-#: doc/classes/Image.xml
-msgid "Returns the image's format. See [enum Format] constants."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Returns the image's height."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns the offset where the image's mipmap with index [code]mipmap[/code] "
-"is stored in the [code]data[/code] dictionary."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns the color of the pixel at [code](x, y)[/code] if the image is "
-"locked. If the image is unlocked, it always returns a [Color] with the value "
-"[code](0, 0, 0, 1.0)[/code]. This is the same as [method get_pixelv], but "
-"two integer arguments instead of a Vector2 argument."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns the color of the pixel at [code]src[/code] if the image is locked. "
-"If the image is unlocked, it always returns a [Color] with the value [code]"
-"(0, 0, 0, 1.0)[/code]. This is the same as [method get_pixel], but with a "
-"Vector2 argument instead of two integer arguments."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns a new image that is a copy of the image's area specified with "
-"[code]rect[/code]."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Returns the image's size (width and height)."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns a [Rect2] enclosing the visible portion of the image, considering "
-"each pixel with a non-zero alpha channel as visible."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Returns the image's width."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Returns [code]true[/code] if the image has generated mipmaps."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Returns [code]true[/code] if the image is compressed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Returns [code]true[/code] if the image has no data."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Returns [code]true[/code] if all the image's pixels have an alpha value of "
-"0. Returns [code]false[/code] if any pixel has an alpha value higher than 0."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Loads an image from file [code]path[/code]. See [url=$DOCS_URL/tutorials/"
-"assets_pipeline/importing_images.html#supported-image-formats]Supported "
-"image formats[/url] for a list of supported image formats and limitations.\n"
-"[b]Warning:[/b] This method should only be used in the editor or in cases "
-"when you need to load external images at run-time, such as images located at "
-"the [code]user://[/code] directory, and may not work in exported projects.\n"
-"See also [ImageTexture] description for usage examples."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Loads an image from the binary contents of a BMP file.\n"
-"[b]Note:[/b] Godot's BMP module doesn't support 16-bit per pixel images. "
-"Only 1-bit, 4-bit, 8-bit, 24-bit, and 32-bit per pixel images are supported."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Loads an image from the binary contents of a JPEG file."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Loads an image from the binary contents of a PNG file."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Loads an image from the binary contents of a TGA file."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Loads an image from the binary contents of a WebP file."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Locks the data for reading and writing access. Sends an error to the console "
-"if the image is not locked when reading or writing a pixel."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Converts the image's data to represent coordinates on a 3D plane. This is "
-"used when the image represents a normalmap. A normalmap can add lots of "
-"detail to a 3D surface without increasing the polygon count."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Multiplies color values with alpha values. Resulting color values for a "
-"pixel are [code](color * alpha)/256[/code]."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Resizes the image to the given [code]width[/code] and [code]height[/code]. "
-"New pixels are calculated using the [code]interpolation[/code] mode defined "
-"via [enum Interpolation] constants."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Resizes the image to the nearest power of 2 for the width and height. If "
-"[code]square[/code] is [code]true[/code] then set width and height to be the "
-"same. New pixels are calculated using the [code]interpolation[/code] mode "
-"defined via [enum Interpolation] constants."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Converts a standard RGBE (Red Green Blue Exponent) image to an sRGB image."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Saves the image as an EXR file to [code]path[/code]. If [code]grayscale[/"
-"code] is [code]true[/code] and the image has only one channel, it will be "
-"saved explicitly as monochrome rather than one red channel. This function "
-"will return [constant ERR_UNAVAILABLE] if Godot was compiled without the "
-"TinyEXR module.\n"
-"[b]Note:[/b] The TinyEXR module is disabled in non-editor builds, which "
-"means [method save_exr] will return [constant ERR_UNAVAILABLE] when it is "
-"called from an exported project."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Saves the image as a PNG file to [code]path[/code]."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Sets the [Color] of the pixel at [code](x, y)[/code] if the image is locked. "
-"Example:\n"
-"[codeblock]\n"
-"var img = Image.new()\n"
-"img.create(img_width, img_height, false, Image.FORMAT_RGBA8)\n"
-"img.lock()\n"
-"img.set_pixel(x, y, color) # Works\n"
-"img.unlock()\n"
-"img.set_pixel(x, y, color) # Does not have an effect\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Sets the [Color] of the pixel at [code](dst.x, dst.y)[/code] if the image is "
-"locked. Note that the [code]dst[/code] values must be integers. Example:\n"
-"[codeblock]\n"
-"var img = Image.new()\n"
-"img.create(img_width, img_height, false, Image.FORMAT_RGBA8)\n"
-"img.lock()\n"
-"img.set_pixelv(Vector2(x, y), color) # Works\n"
-"img.unlock()\n"
-"img.set_pixelv(Vector2(x, y), color) # Does not have an effect\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Shrinks the image by a factor of 2."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Converts the raw data from the sRGB colorspace to a linear scale."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Unlocks the data and prevents changes."
-msgstr ""
-
-#: doc/classes/Image.xml
-#, fuzzy
-msgid ""
-"Holds all the image's color data in a given format. See [enum Format] "
-"constants."
-msgstr ""
-"Steuert die Interpolation zwischen den Animationen. Siehe Konstanten [enum "
-"BlendMode]."
-
-#: doc/classes/Image.xml
-msgid "The maximal width allowed for [Image] resources."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "The maximal height allowed for [Image] resources."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Texture format with a single 8-bit depth representing luminance."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format with two values, luminance and alpha each stored with "
-"8 bits."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]RED[/code] with a single component and a "
-"bitdepth of 8.\n"
-"[b]Note:[/b] When using the GLES2 backend, this uses the alpha channel "
-"instead of the red channel for storage."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]RG[/code] with two components and a bitdepth of "
-"8 for each."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]RGB[/code] with three components, each with a "
-"bitdepth of 8.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]RGBA[/code] with four components, each with a "
-"bitdepth of 8.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]RGBA[/code] with four components, each with a "
-"bitdepth of 4."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RGB5_A1[/code] where 5 bits of depth for each "
-"component of RGB and one bit for alpha."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_R32F[/code] where there's one component, a 32-"
-"bit floating-point value."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RG32F[/code] where there are two components, "
-"each a 32-bit floating-point values."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RGB32F[/code] where there are three "
-"components, each a 32-bit floating-point values."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RGBA32F[/code] where there are four "
-"components, each a 32-bit floating-point values."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_R32F[/code] where there's one component, a 16-"
-"bit \"half-precision\" floating-point value."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RG32F[/code] where there are two components, "
-"each a 16-bit \"half-precision\" floating-point value."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RGB32F[/code] where there are three "
-"components, each a 16-bit \"half-precision\" floating-point value."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"OpenGL texture format [code]GL_RGBA32F[/code] where there are four "
-"components, each a 16-bit \"half-precision\" floating-point value."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"A special OpenGL texture format where the three color components have 9 bits "
-"of precision and all three share a single 5-bit exponent."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"The [url=https://en.wikipedia.org/wiki/S3_Texture_Compression]S3TC[/url] "
-"texture format that uses Block Compression 1, and is the smallest variation "
-"of S3TC, only providing 1 bit of alpha and color data being premultiplied "
-"with alpha.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"The [url=https://en.wikipedia.org/wiki/S3_Texture_Compression]S3TC[/url] "
-"texture format that uses Block Compression 2, and color data is interpreted "
-"as not having been premultiplied by alpha. Well suited for images with sharp "
-"alpha transitions between translucent and opaque areas.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"The [url=https://en.wikipedia.org/wiki/S3_Texture_Compression]S3TC[/url] "
-"texture format also known as Block Compression 3 or BC3 that contains 64 "
-"bits of alpha channel data followed by 64 bits of DXT1-encoded color data. "
-"Color data is not premultiplied by alpha, same as DXT3. DXT5 generally "
-"produces superior results for transparent gradients compared to DXT3.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Texture format that uses [url=https://www.khronos.org/opengl/wiki/"
-"Red_Green_Texture_Compression]Red Green Texture Compression[/url], "
-"normalizing the red channel data using the same compression algorithm that "
-"DXT5 uses for the alpha channel."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Texture format that uses [url=https://www.khronos.org/opengl/wiki/"
-"Red_Green_Texture_Compression]Red Green Texture Compression[/url], "
-"normalizing the red and green channel data using the same compression "
-"algorithm that DXT5 uses for the alpha channel."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Texture format that uses [url=https://www.khronos.org/opengl/wiki/"
-"BPTC_Texture_Compression]BPTC[/url] compression with unsigned normalized "
-"RGBA components.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Texture format that uses [url=https://www.khronos.org/opengl/wiki/"
-"BPTC_Texture_Compression]BPTC[/url] compression with signed floating-point "
-"RGB components."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Texture format that uses [url=https://www.khronos.org/opengl/wiki/"
-"BPTC_Texture_Compression]BPTC[/url] compression with unsigned floating-point "
-"RGB components."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Texture format used on PowerVR-supported mobile platforms, uses 2-bit color "
-"depth with no alpha. More information can be found [url=https://en.wikipedia."
-"org/wiki/PVRTC]here[/url].\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Same as [url=https://en.wikipedia.org/wiki/PVRTC]PVRTC2[/url], but with an "
-"alpha component."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Similar to [url=https://en.wikipedia.org/wiki/PVRTC]PVRTC2[/url], but with 4-"
-"bit color depth and no alpha."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Same as [url=https://en.wikipedia.org/wiki/PVRTC]PVRTC4[/url], but with an "
-"alpha component."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC1]Ericsson Texture Compression format 1[/"
-"url], also referred to as \"ETC1\", and is part of the OpenGL ES graphics "
-"standard. This format cannot store an alpha channel."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]R11_EAC[/code] variant), which provides one channel of "
-"unsigned data."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]SIGNED_R11_EAC[/code] variant), which provides one "
-"channel of signed data."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]RG11_EAC[/code] variant), which provides two channels "
-"of unsigned data."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]SIGNED_RG11_EAC[/code] variant), which provides two "
-"channels of signed data."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]RGB8[/code] variant), which is a follow-up of ETC1 and "
-"compresses RGB888 data.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]RGBA8[/code]variant), which compresses RGBA8888 data "
-"with full alpha support.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"[url=https://en.wikipedia.org/wiki/"
-"Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression "
-"format 2[/url] ([code]RGB8_PUNCHTHROUGH_ALPHA1[/code] variant), which "
-"compresses RGBA data to make alpha either fully transparent or fully "
-"opaque.\n"
-"[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space "
-"conversion is performed."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Represents the size of the [enum Format] enum."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Performs nearest-neighbor interpolation. If the image is resized, it will be "
-"pixelated."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Performs bilinear interpolation. If the image is resized, it will be blurry. "
-"This mode is faster than [constant INTERPOLATE_CUBIC], but it results in "
-"lower quality."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Performs cubic interpolation. If the image is resized, it will be blurry. "
-"This mode often gives better results compared to [constant "
-"INTERPOLATE_BILINEAR], at the cost of being slower."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Performs bilinear separately on the two most-suited mipmap levels, then "
-"linearly interpolates between them.\n"
-"It's slower than [constant INTERPOLATE_BILINEAR], but produces higher-"
-"quality results with far fewer aliasing artifacts.\n"
-"If the image does not have mipmaps, they will be generated and used "
-"internally, but no mipmaps will be generated on the resulting image.\n"
-"[b]Note:[/b] If you intend to scale multiple copies of the original image, "
-"it's better to call [method generate_mipmaps]] on it in advance, to avoid "
-"wasting processing power in generating them again and again.\n"
-"On the other hand, if the image already has mipmaps, they will be used, and "
-"a new set will be generated for the resulting image."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Performs Lanczos interpolation. This is the slowest image resizing mode, but "
-"it typically gives the best results, especially when downscalng images."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Image does not have alpha."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Image stores alpha in a single bit."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Image uses alpha."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Use S3TC compression."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Use PVRTC2 compression."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Use PVRTC4 compression."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Use ETC compression."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Use ETC2 compression."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Source texture (before compression) is a regular texture. Default for all "
-"textures."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Source texture (before compression) is in sRGB space."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid ""
-"Source texture (before compression) is a normal texture (e.g. it can be "
-"compressed into two channels)."
-msgstr ""
-
-#: doc/classes/Image.xml
-msgid "Source texture (before compression) is a [TextureLayered]."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid "A [Texture] based on an [Image]."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid ""
-"A [Texture] based on an [Image]. For an image to be displayed, an "
-"[ImageTexture] has to be created from it using the [method "
-"create_from_image] method:\n"
-"[codeblock]\n"
-"var texture = ImageTexture.new()\n"
-"var image = Image.new()\n"
-"image.load(\"res://icon.png\")\n"
-"texture.create_from_image(image)\n"
-"$Sprite.texture = texture\n"
-"[/codeblock]\n"
-"This way, textures can be created at run-time by loading images both from "
-"within the editor and externally.\n"
-"[b]Warning:[/b] Prefer to load imported textures with [method @GDScript."
-"load] over loading them from within the filesystem dynamically with [method "
-"Image.load], as it may not work in exported projects:\n"
-"[codeblock]\n"
-"var texture = load(\"res://icon.png\")\n"
-"$Sprite.texture = texture\n"
-"[/codeblock]\n"
-"This is because images have to be imported as [StreamTexture] first to be "
-"loaded with [method @GDScript.load]. If you'd still like to load an image "
-"file just like any other [Resource], import it as an [Image] resource "
-"instead, and then load it normally using the [method @GDScript.load] "
-"method.\n"
-"But do note that the image data can still be retrieved from an imported "
-"texture as well using the [method Texture.get_data] method, which returns a "
-"copy of the data:\n"
-"[codeblock]\n"
-"var texture = load(\"res://icon.png\")\n"
-"var image : Image = texture.get_data()\n"
-"[/codeblock]\n"
-"An [ImageTexture] is not meant to be operated from within the editor "
-"interface directly, and is mostly useful for rendering images on screen "
-"dynamically via code. If you need to generate images procedurally from "
-"within the editor, consider saving and importing images as custom texture "
-"resources implementing a new [EditorImportPlugin].\n"
-"[b]Note:[/b] The maximum texture size is 16384×16384 pixels due to graphics "
-"hardware limitations."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid ""
-"Create a new [ImageTexture] with [code]width[/code] and [code]height[/"
-"code].\n"
-"[code]format[/code] is a value from [enum Image.Format], [code]flags[/code] "
-"is any combination of [enum Texture.Flags]."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid ""
-"Initializes the texture by allocating and setting the data from an [Image] "
-"with [code]flags[/code] from [enum Texture.Flags]. An sRGB to linear color "
-"space conversion can take place, according to [enum Image.Format]."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-#, fuzzy
-msgid "Returns the format of the texture, one of [enum Image.Format]."
-msgstr "Gibt die inverse Quadratwurzel des Parameters zurück."
-
-#: doc/classes/ImageTexture.xml
-msgid ""
-"Loads an image from a file path and creates a texture from it.\n"
-"[b]Note:[/b] This method is deprecated and will be removed in Godot 4.0, use "
-"[method Image.load] and [method create_from_image] instead."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid ""
-"Replaces the texture's data with a new [Image].\n"
-"[b]Note:[/b] The texture has to be initialized first with the [method "
-"create_from_image] method before it can be updated. The new image "
-"dimensions, format, and mipmaps configuration should match the existing "
-"texture's image configuration, otherwise it has to be re-created with the "
-"[method create_from_image] method.\n"
-"Use this method over [method create_from_image] if you need to update the "
-"texture frequently, which is faster than allocating additional memory for a "
-"new texture each time."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Resizes the texture to the specified dimensions."
-msgstr "Trennt das Node, der mit dem angegebenen Eingang verbunden ist."
-
-#: doc/classes/ImageTexture.xml
-msgid "The storage quality for [constant STORAGE_COMPRESS_LOSSY]."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid "The storage type (raw, lossy, or compressed)."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid "[Image] data is stored raw and unaltered."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid ""
-"[Image] data is compressed with a lossy algorithm. You can set the storage "
-"quality with [member lossy_quality]."
-msgstr ""
-
-#: doc/classes/ImageTexture.xml
-msgid "[Image] data is compressed with a lossless algorithm."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "Draws simple geometry from code."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid ""
-"Draws simple geometry from code. Uses a drawing mode similar to OpenGL 1.x.\n"
-"See also [ArrayMesh], [MeshDataTool] and [SurfaceTool] for procedural "
-"geometry generation.\n"
-"[b]Note:[/b] ImmediateGeometry3D is best suited to small amounts of mesh "
-"data that change every frame. It will be slow when handling large amounts of "
-"mesh data. If mesh data doesn't change often, use [ArrayMesh], "
-"[MeshDataTool] or [SurfaceTool] instead.\n"
-"[b]Note:[/b] Godot uses clockwise [url=https://learnopengl.com/Advanced-"
-"OpenGL/Face-culling]winding order[/url] for front faces of triangle "
-"primitive modes.\n"
-"[b]Note:[/b] In case of missing points when handling large amounts of mesh "
-"data, try increasing its buffer size limit under [member ProjectSettings."
-"rendering/limits/buffers/immediate_buffer_size_kb]."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid ""
-"Simple helper to draw an UV sphere with given latitude, longitude and radius."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid ""
-"Adds a vertex in local coordinate space with the currently set color/uv/etc."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid ""
-"Begin drawing (and optionally pass a texture override). When done call "
-"[method end]. For more information on how this works, search for "
-"[code]glBegin()[/code] and [code]glEnd()[/code] references.\n"
-"For the type of primitive, see the [enum Mesh.PrimitiveType] enum."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "Clears everything that was drawn using begin/end."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "Ends a drawing context and displays the results."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "The current drawing color."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "The next vertex's normal."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "The next vertex's tangent (and binormal facing)."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "The next vertex's UV."
-msgstr ""
-
-#: doc/classes/ImmediateGeometry.xml
-msgid "The next vertex's second layer UV."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "A singleton that deals with inputs."
-msgstr "Ein Singleton, der sich mit Inputs befasst."
-
-#: doc/classes/Input.xml
-msgid ""
-"A singleton that deals with inputs. This includes key presses, mouse buttons "
-"and movement, joypads, and input actions. Actions and their events can be "
-"set in the [b]Input Map[/b] tab in the [b]Project > Project Settings[/b], or "
-"with the [InputMap] class."
-msgstr ""
-"Ein Singleton, das sich mit Inputs befasst. Dazu gehören Tastendrucke, "
-"Maustasten und -bewegungen, Joypads und Eingabeaktionen. Aktionen und ihre "
-"Ereignisse können auf der Registerkarte [b]Eingabe-Zuordnung[/b] unter "
-"[b]Projekt > Projekteinstellungen[/b] oder mit der Klasse [InputMap] "
-"festgelegt werden."
-
-#: doc/classes/Input.xml
-msgid "Inputs tutorial index"
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"This will simulate pressing the specified action.\n"
-"The strength can be used for non-boolean actions, it's ranged between 0 and "
-"1 representing the intensity of the given action.\n"
-"[b]Note:[/b] This method will not cause any [method Node._input] calls. It "
-"is intended to be used with [method is_action_pressed] and [method "
-"is_action_just_pressed]. If you want to simulate [code]_input[/code], use "
-"[method parse_input_event] instead."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "If the specified action is already pressed, this will release it."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Adds a new mapping entry (in SDL2 format) to the mapping database. "
-"Optionally update already connected devices."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sends all input events which are in the current buffer to the game loop. "
-"These events may have been buffered as a result of accumulated input "
-"([member use_accumulated_input]) or agile input flushing ([member "
-"ProjectSettings.input_devices/buffering/agile_event_flushing]).\n"
-"The engine will already do this itself at key execution points (at least "
-"once per frame). However, this can be useful in advanced cases where you "
-"want precise control over the timing of event handling."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the acceleration of the device's accelerometer sensor, if the device "
-"has one. Otherwise, the method returns [constant Vector3.ZERO].\n"
-"Note this method returns an empty [Vector3] when running from the editor "
-"even when your device has an accelerometer. You must export your project to "
-"a supported device to read values from the accelerometer.\n"
-"[b]Note:[/b] This method only works on iOS, Android, and UWP. On other "
-"platforms, it always returns [constant Vector3.ZERO]. On Android the unit of "
-"measurement for each axis is m/s² while on iOS and UWP it's a multiple of "
-"the Earth's gravitational acceleration [code]g[/code] (~9.81 m/s²)."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns a value between 0 and 1 representing the raw intensity of the given "
-"action, ignoring the action's deadzone. In most cases, you should use "
-"[method get_action_strength] instead.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores additional input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns a value between 0 and 1 representing the intensity of the given "
-"action. In a joypad, for example, the further away the axis (analog sticks "
-"or L2, R2 triggers) is from the dead zone, the closer the value will be to "
-"1. If the action is mapped to a control that has no axis as the keyboard, "
-"the value returned will be 0 or 1.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores additional input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Get axis input by specifying two actions, one negative and one positive.\n"
-"This is a shorthand for writing [code]Input."
-"get_action_strength(\"positive_action\") - Input."
-"get_action_strength(\"negative_action\")[/code]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns an [Array] containing the device IDs of all currently connected "
-"joypads."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Returns the currently assigned cursor shape (see [enum CursorShape])."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the gravity of the device's accelerometer sensor, if the device has "
-"one. Otherwise, the method returns [constant Vector3.ZERO].\n"
-"[b]Note:[/b] This method only works on Android and iOS. On other platforms, "
-"it always returns [constant Vector3.ZERO]. On Android the unit of "
-"measurement for each axis is m/s² while on iOS it's a multiple of the "
-"Earth's gravitational acceleration [code]g[/code] (~9.81 m/s²)."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the rotation rate in rad/s around a device's X, Y, and Z axes of the "
-"gyroscope sensor, if the device has one. Otherwise, the method returns "
-"[constant Vector3.ZERO].\n"
-"[b]Note:[/b] This method only works on Android and iOS. On other platforms, "
-"it always returns [constant Vector3.ZERO]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the current value of the joypad axis at given index (see [enum "
-"JoystickList])."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Returns the index of the provided axis name."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Receives a [enum JoystickList] axis and returns its equivalent name as a "
-"string."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Returns the index of the provided button name."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Receives a gamepad button from [enum JoystickList] and returns its "
-"equivalent name as a string."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns a SDL2-compatible device GUID on platforms that use gamepad "
-"remapping. Returns [code]\"Default Gamepad\"[/code] otherwise."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Returns the name of the joypad at the specified device index."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Returns the duration of the current vibration effect in seconds."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the strength of the joypad vibration: x is the strength of the weak "
-"motor, and y is the strength of the strong motor."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the mouse speed for the last time the cursor was moved, and this "
-"until the next frame where the mouse moves. This means that even if the "
-"mouse is not moving, this function will still return the value of the last "
-"motion."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns the magnetic field strength in micro-Tesla for all axes of the "
-"device's magnetometer sensor, if the device has one. Otherwise, the method "
-"returns [constant Vector3.ZERO].\n"
-"[b]Note:[/b] This method only works on Android, iOS and UWP. On other "
-"platforms, it always returns [constant Vector3.ZERO]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns mouse buttons as a bitmask. If multiple mouse buttons are pressed at "
-"the same time, the bits are added together."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Gets an input vector by specifying four actions for the positive and "
-"negative X and Y axes.\n"
-"This method is useful when getting vector input, such as from a joystick, "
-"directional pad, arrows, or WASD. The vector has its length limited to 1 and "
-"has a circular deadzone, which is useful for using vector input as "
-"movement.\n"
-"By default, the deadzone is automatically calculated from the average of the "
-"action deadzones. However, you can override the deadzone to be whatever you "
-"want (on the range of 0 to 1)."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] when the user starts pressing the action event, "
-"meaning it's [code]true[/code] only on the frame that the user pressed down "
-"the button.\n"
-"This is useful for code that needs to run only once when an action is "
-"pressed, instead of every frame while it's pressed.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores additional input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events.\n"
-"[b]Note:[/b] Due to keyboard ghosting, [method is_action_just_pressed] may "
-"return [code]false[/code] even if one of the action's keys is pressed. See "
-"[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
-"examples[/url] in the documentation for more information."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] when the user stops pressing the action event, "
-"meaning it's [code]true[/code] only on the frame that the user released the "
-"button.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores additional input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] if you are pressing the action event. Note that if "
-"an action has multiple buttons assigned and more than one of them is "
-"pressed, releasing one button will release the action, even if some other "
-"button assigned to this action is still pressed.\n"
-"If [code]exact[/code] is [code]false[/code], it ignores additional input "
-"modifiers for [InputEventKey] and [InputEventMouseButton] events, and the "
-"direction for [InputEventJoypadMotion] events.\n"
-"[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return "
-"[code]false[/code] even if one of the action's keys is pressed. See "
-"[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
-"examples[/url] in the documentation for more information."
-msgstr ""
-"Gibt [code]true[/code] aus, wenn Sie das Aktionsereignis drücken. Beachten "
-"Sie, dass, wenn einer Aktion mehrere Tasten zugewiesen sind und mehr als "
-"eine von ihnen gedrückt wird, das Loslassen einer Taste die Aktion auslöst, "
-"selbst wenn eine andere Taste, die dieser Aktion zugewiesen ist, noch "
-"gedrückt ist.\n"
-"Wenn [code]exact[/code] [code] false[/code] ist, werden zusätzliche "
-"Eingabemodifikatoren für die Ereignisse [InputEventKey] und "
-"[InputEventMouseButton] sowie die Richtung für die Ereignisse "
-"[InputEventJoypadMotion] ignoriert.\n"
-"[b]Hinweis:[/b] Aufgrund von Tastatur-Ghosting kann [method "
-"is_action_pressed] [code]false[/code] zurückgeben, auch wenn eine der Tasten "
-"der Aktion gedrückt ist. Siehe [url=$DOCS_URL/tutorials/inputs/"
-"input_examples.html#keyboard-events]Eingabebeispiele[/url] in der "
-"Dokumentation für weitere Informationen."
-
-#: doc/classes/Input.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if you are pressing the joypad button (see [enum "
-"JoystickList])."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Übergang zwischen den übergebenen "
-"Nodes existiert."
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] if the system knows the specified device. This "
-"means that it sets all button and axis indices exactly as defined in [enum "
-"JoystickList]. Unknown joypads are not expected to match these constants, "
-"but you can still retrieve events from them."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] if you are pressing the key in the current "
-"keyboard layout. You can pass a [enum KeyList] constant.\n"
-"[method is_key_pressed] is only recommended over [method "
-"is_physical_key_pressed] in non-game applications. This ensures that "
-"shortcut keys behave as expected depending on the user's keyboard layout, as "
-"keyboard shortcuts are generally dependent on the keyboard layout in non-"
-"game applications. If in doubt, use [method is_physical_key_pressed].\n"
-"[b]Note:[/b] Due to keyboard ghosting, [method is_key_pressed] may return "
-"[code]false[/code] even if one of the action's keys is pressed. See "
-"[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
-"examples[/url] in the documentation for more information."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] if you are pressing the mouse button specified "
-"with [enum ButtonList]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Returns [code]true[/code] if you are pressing the key in the physical "
-"location on the 101/102-key US QWERTY keyboard. You can pass a [enum "
-"KeyList] constant.\n"
-"[method is_physical_key_pressed] is recommended over [method is_key_pressed] "
-"for in-game actions, as it will make W/A/S/D layouts work regardless of the "
-"user's keyboard layout. [method is_physical_key_pressed] will also ensure "
-"that the top row number keys work on any keyboard layout. If in doubt, use "
-"[method is_physical_key_pressed].\n"
-"[b]Note:[/b] Due to keyboard ghosting, [method is_physical_key_pressed] may "
-"return [code]false[/code] even if one of the action's keys is pressed. See "
-"[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
-"examples[/url] in the documentation for more information."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Notifies the [Input] singleton that a connection has changed, to update the "
-"state for the [code]device[/code] index.\n"
-"This is used internally and should not have to be called from user scripts. "
-"See [signal joy_connection_changed] for the signal emitted when this is "
-"triggered internally."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Feeds an [InputEvent] to the game. Can be used to artificially trigger input "
-"events from code. Also generates [method Node._input] calls.\n"
-"Example:\n"
-"[codeblock]\n"
-"var a = InputEventAction.new()\n"
-"a.action = \"ui_cancel\"\n"
-"a.pressed = true\n"
-"Input.parse_input_event(a)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Removes all mappings from the internal database that match the given GUID."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets the acceleration value of the accelerometer sensor. Can be used for "
-"debugging on devices without a hardware sensor, for example in an editor on "
-"a PC.\n"
-"[b]Note:[/b] This value can be immediately overwritten by the hardware "
-"sensor value on Android and iOS."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets a custom mouse cursor image, which is only visible inside the game "
-"window. The hotspot can also be specified. Passing [code]null[/code] to the "
-"image parameter resets to the system cursor. See [enum CursorShape] for the "
-"list of shapes.\n"
-"[code]image[/code]'s size must be lower than 256×256.\n"
-"[code]hotspot[/code] must be within [code]image[/code]'s size.\n"
-"[b]Note:[/b] [AnimatedTexture]s aren't supported as custom mouse cursors. If "
-"using an [AnimatedTexture], only the first frame will be displayed.\n"
-"[b]Note:[/b] Only images imported with the [b]Lossless[/b], [b]Lossy[/b] or "
-"[b]Uncompressed[/b] compression modes are supported. The [b]Video RAM[/b] "
-"compression mode can't be used for custom cursors.\n"
-"[b]Note:[/b] On the web platform, the maximum allowed cursor image size is "
-"128×128. Cursor images larger than 32×32 will also only be displayed if the "
-"mouse cursor image is entirely located within the page for [url=https://"
-"chromestatus.com/feature/5825971391299584]security reasons[/url]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets the default cursor shape to be used in the viewport instead of "
-"[constant CURSOR_ARROW].\n"
-"[b]Note:[/b] If you want to change the default cursor shape for [Control]'s "
-"nodes, use [member Control.mouse_default_cursor_shape] instead.\n"
-"[b]Note:[/b] This method generates an [InputEventMouseMotion] to update "
-"cursor immediately."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets the gravity value of the accelerometer sensor. Can be used for "
-"debugging on devices without a hardware sensor, for example in an editor on "
-"a PC.\n"
-"[b]Note:[/b] This value can be immediately overwritten by the hardware "
-"sensor value on Android and iOS."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets the value of the rotation rate of the gyroscope sensor. Can be used for "
-"debugging on devices without a hardware sensor, for example in an editor on "
-"a PC.\n"
-"[b]Note:[/b] This value can be immediately overwritten by the hardware "
-"sensor value on Android and iOS."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets the value of the magnetic field of the magnetometer sensor. Can be used "
-"for debugging on devices without a hardware sensor, for example in an editor "
-"on a PC.\n"
-"[b]Note:[/b] This value can be immediately overwritten by the hardware "
-"sensor value on Android and iOS."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Starts to vibrate the joypad. Joypads usually come with two rumble motors, a "
-"strong and a weak one. [code]weak_magnitude[/code] is the strength of the "
-"weak motor (between 0 and 1) and [code]strong_magnitude[/code] is the "
-"strength of the strong motor (between 0 and 1). [code]duration[/code] is the "
-"duration of the effect in seconds (a duration of 0 will try to play the "
-"vibration indefinitely).\n"
-"[b]Note:[/b] Not every hardware is compatible with long effect durations; it "
-"is recommended to restart an effect if it has to be played for more than a "
-"few seconds."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Stops the vibration of the joypad."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Vibrate handheld devices.\n"
-"[b]Note:[/b] This method is implemented on Android, iOS, and HTML5.\n"
-"[b]Note:[/b] For Android, it requires enabling the [code]VIBRATE[/code] "
-"permission in the export preset.\n"
-"[b]Note:[/b] For iOS, specifying the duration is supported in iOS 13 and "
-"later.\n"
-"[b]Note:[/b] Some web browsers such as Safari and Firefox for Android do not "
-"support this method."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Sets the mouse position to the specified vector, provided in pixels and "
-"relative to an origin at the upper left corner of the game window.\n"
-"Mouse position is clipped to the limits of the screen resolution, or to the "
-"limits of the game window if [enum MouseMode] is set to [constant "
-"MOUSE_MODE_CONFINED]."
-msgstr ""
-
-#: doc/classes/Input.xml
-#, fuzzy
-msgid "Controls the mouse mode. See [enum MouseMode] for more information."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: doc/classes/Input.xml
-msgid ""
-"If [code]true[/code], similar input events sent by the operating system are "
-"accumulated. When input accumulation is enabled, all input events generated "
-"during a frame will be merged and emitted when the frame is done rendering. "
-"Therefore, this limits the number of input method calls per second to the "
-"rendering FPS.\n"
-"Input accumulation can be disabled to get slightly more precise/reactive "
-"input at the cost of increased CPU usage. In applications where drawing "
-"freehand lines is required, input accumulation should generally be disabled "
-"while the user is drawing the line to get results that closely follow the "
-"actual input.\n"
-"[b]Note:[/b] Input accumulation is [i]enabled[/i] by default. It is "
-"recommended to keep it enabled for games which don't require very reactive "
-"input, as this will decrease CPU usage."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Emitted when a joypad device has been connected or disconnected."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Makes the mouse cursor visible if it is hidden."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Makes the mouse cursor hidden if it is visible."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Captures the mouse. The mouse will be hidden and its position locked at the "
-"center of the screen.\n"
-"[b]Note:[/b] If you want to process the mouse's movement in this mode, you "
-"need to use [member InputEventMouseMotion.relative]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Makes the mouse cursor visible but confines it to the game window."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Arrow cursor. Standard, default pointing cursor."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"I-beam cursor. Usually used to show where the text cursor will appear when "
-"the mouse is clicked."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Pointing hand cursor. Usually used to indicate the pointer is over a link or "
-"other interactable item."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Cross cursor. Typically appears over regions in which a drawing operation "
-"can be performed or for selections."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Wait cursor. Indicates that the application is busy performing an operation. "
-"This cursor shape denotes that the application isn't usable during the "
-"operation (e.g. something is blocking its main thread)."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Busy cursor. Indicates that the application is busy performing an operation. "
-"This cursor shape denotes that the application is still usable during the "
-"operation."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Drag cursor. Usually displayed when dragging something."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Can drop cursor. Usually displayed when dragging something to indicate that "
-"it can be dropped at the current position."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Forbidden cursor. Indicates that the current action is forbidden (for "
-"example, when dragging something) or that the control at a position is "
-"disabled."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Vertical resize mouse cursor. A double-headed vertical arrow. It tells the "
-"user they can resize the window or the panel vertically."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Horizontal resize mouse cursor. A double-headed horizontal arrow. It tells "
-"the user they can resize the window or the panel horizontally."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Window resize mouse cursor. The cursor is a double-headed arrow that goes "
-"from the bottom left to the top right. It tells the user they can resize the "
-"window or the panel both horizontally and vertically."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Window resize mouse cursor. The cursor is a double-headed arrow that goes "
-"from the top left to the bottom right, the opposite of [constant "
-"CURSOR_BDIAGSIZE]. It tells the user they can resize the window or the panel "
-"both horizontally and vertically."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Move cursor. Indicates that something can be moved."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Vertical split mouse cursor. On Windows, it's the same as [constant "
-"CURSOR_VSIZE]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid ""
-"Horizontal split mouse cursor. On Windows, it's the same as [constant "
-"CURSOR_HSIZE]."
-msgstr ""
-
-#: doc/classes/Input.xml
-msgid "Help cursor. Usually a question mark."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid "Generic input event."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid "Base class of all sort of input event. See [method Node._input]."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid "InputEvent"
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if the given input event and this input event can "
-"be added together (only for events of type [InputEventMouseMotion]).\n"
-"The given input event's position, global position and speed will be copied. "
-"The resulting [code]relative[/code] is a sum of both events. Both events' "
-"modifiers have to be identical."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid "Returns a [String] representation of the event."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns a value between 0.0 and 1.0 depending on the given actions' state. "
-"Useful for getting the value of events of type [InputEventJoypadMotion].\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
-"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
-"the direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if this input event matches a pre-defined action "
-"of any type.\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
-"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
-"the direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if the given action is being pressed (and is not "
-"an echo event for [InputEventKey] events, unless [code]allow_echo[/code] is "
-"[code]true[/code]). Not relevant for events of type [InputEventMouseMotion] "
-"or [InputEventScreenDrag].\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
-"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
-"the direction for [InputEventJoypadMotion] events.\n"
-"[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return "
-"[code]false[/code] even if one of the action's keys is pressed. See "
-"[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
-"examples[/url] in the documentation for more information."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if the given action is released (i.e. not "
-"pressed). Not relevant for events of type [InputEventMouseMotion] or "
-"[InputEventScreenDrag].\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
-"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
-"the direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if this input event's type is one that can be "
-"assigned to an input action."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if this input event is an echo event (only for "
-"events of type [InputEventKey])."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if this input event is pressed. Not relevant for "
-"events of type [InputEventMouseMotion] or [InputEventScreenDrag].\n"
-"[b]Note:[/b] Due to keyboard ghosting, [method is_action_pressed] may return "
-"[code]false[/code] even if one of the action's keys is pressed. See "
-"[url=$DOCS_URL/tutorials/inputs/input_examples.html#keyboard-events]Input "
-"examples[/url] in the documentation for more information."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns [code]true[/code] if the specified [code]event[/code] matches this "
-"event. Only valid for action events i.e key ([InputEventKey]), button "
-"([InputEventMouseButton] or [InputEventJoypadButton]), axis "
-"[InputEventJoypadMotion] or action ([InputEventAction]) events.\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
-"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
-"the direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"Returns a copy of the given input event which has been offset by "
-"[code]local_ofs[/code] and transformed by [code]xform[/code]. Relevant for "
-"events of type [InputEventMouseButton], [InputEventMouseMotion], "
-"[InputEventScreenTouch], [InputEventScreenDrag], [InputEventMagnifyGesture] "
-"and [InputEventPanGesture]."
-msgstr ""
-
-#: doc/classes/InputEvent.xml
-msgid ""
-"The event's device ID.\n"
-"[b]Note:[/b] This device ID will always be [code]-1[/code] for emulated "
-"mouse input from a touchscreen. This can be used to distinguish emulated "
-"mouse input from physical mouse input."
-msgstr ""
-
-#: doc/classes/InputEventAction.xml
-msgid "Input event type for actions."
-msgstr ""
-
-#: doc/classes/InputEventAction.xml
-msgid ""
-"Contains a generic action which can be targeted from several types of "
-"inputs. Actions can be created from the [b]Input Map[/b] tab in the "
-"[b]Project > Project Settings[/b] menu. See [method Node._input]."
-msgstr ""
-
-#: doc/classes/InputEventAction.xml
-msgid "InputEvent: Actions"
-msgstr ""
-
-#: doc/classes/InputEventAction.xml
-msgid "The action's name. Actions are accessed via this [String]."
-msgstr ""
-
-#: doc/classes/InputEventAction.xml
-msgid ""
-"If [code]true[/code], the action's state is pressed. If [code]false[/code], "
-"the action's state is released."
-msgstr ""
-
-#: doc/classes/InputEventAction.xml
-msgid ""
-"The action's strength between 0 and 1. This value is considered as equal to "
-"0 if pressed is [code]false[/code]. The event strength allows faking analog "
-"joypad motion events, by specifying how strongly the joypad axis is bent or "
-"pressed."
-msgstr ""
-
-#: doc/classes/InputEventGesture.xml
-msgid "Base class for touch control gestures."
-msgstr ""
-
-#: doc/classes/InputEventGesture.xml
-msgid ""
-"The local gesture position relative to the [Viewport]. If used in [method "
-"Control._gui_input], the position is relative to the current [Control] that "
-"received this gesture."
-msgstr ""
-
-#: doc/classes/InputEventJoypadButton.xml
-msgid "Input event for gamepad buttons."
-msgstr ""
-
-#: doc/classes/InputEventJoypadButton.xml
-msgid ""
-"Input event type for gamepad buttons. For gamepad analog sticks and "
-"joysticks, see [InputEventJoypadMotion]."
-msgstr ""
-
-#: doc/classes/InputEventJoypadButton.xml
-msgid "Button identifier. One of the [enum JoystickList] button constants."
-msgstr ""
-
-#: doc/classes/InputEventJoypadButton.xml
-msgid ""
-"If [code]true[/code], the button's state is pressed. If [code]false[/code], "
-"the button's state is released."
-msgstr ""
-
-#: doc/classes/InputEventJoypadButton.xml
-msgid ""
-"Represents the pressure the user puts on the button with their finger, if "
-"the controller supports it. Ranges from [code]0[/code] to [code]1[/code]."
-msgstr ""
-
-#: doc/classes/InputEventJoypadMotion.xml
-msgid ""
-"Input event type for gamepad joysticks and other motions. For buttons, see "
-"[code]InputEventJoypadButton[/code]."
-msgstr ""
-
-#: doc/classes/InputEventJoypadMotion.xml
-msgid ""
-"Stores information about joystick motions. One [InputEventJoypadMotion] "
-"represents one axis at a time."
-msgstr ""
-
-#: doc/classes/InputEventJoypadMotion.xml
-msgid "Axis identifier. Use one of the [enum JoystickList] axis constants."
-msgstr ""
-
-#: doc/classes/InputEventJoypadMotion.xml
-msgid ""
-"Current position of the joystick on the given axis. The value ranges from "
-"[code]-1.0[/code] to [code]1.0[/code]. A value of [code]0[/code] means the "
-"axis is in its resting position."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid "Input event type for keyboard events."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"Stores key presses on the keyboard. Supports key presses, key releases and "
-"[member echo] events."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"Returns the physical scancode combined with modifier keys such as "
-"[code]Shift[/code] or [code]Alt[/code]. See also [InputEventWithModifiers].\n"
-"To get a human-readable representation of the [InputEventKey] with "
-"modifiers, use [code]OS.get_scancode_string(event."
-"get_physical_scancode_with_modifiers())[/code] where [code]event[/code] is "
-"the [InputEventKey]."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"Returns the scancode combined with modifier keys such as [code]Shift[/code] "
-"or [code]Alt[/code]. See also [InputEventWithModifiers].\n"
-"To get a human-readable representation of the [InputEventKey] with "
-"modifiers, use [code]OS.get_scancode_string(event."
-"get_scancode_with_modifiers())[/code] where [code]event[/code] is the "
-"[InputEventKey]."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"If [code]true[/code], the key was already pressed before this event. It "
-"means the user is holding the key down."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"Key physical scancode, which corresponds to one of the [enum KeyList] "
-"constants. Represent the physical location of a key on the 101/102-key US "
-"QWERTY keyboard.\n"
-"To get a human-readable representation of the [InputEventKey], use [code]OS."
-"get_scancode_string(event.physical_scancode)[/code] where [code]event[/code] "
-"is the [InputEventKey]."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"If [code]true[/code], the key's state is pressed. If [code]false[/code], the "
-"key's state is released."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"The key scancode, which corresponds to one of the [enum KeyList] constants. "
-"Represent key in the current keyboard layout.\n"
-"To get a human-readable representation of the [InputEventKey], use [code]OS."
-"get_scancode_string(event.scancode)[/code] where [code]event[/code] is the "
-"[InputEventKey]."
-msgstr ""
-
-#: doc/classes/InputEventKey.xml
-msgid ""
-"The key Unicode identifier (when relevant). Unicode identifiers for the "
-"composite characters and complex scripts may not be available unless IME "
-"input mode is active. See [method OS.set_ime_active] for more information."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid "Input event for MIDI inputs."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"InputEventMIDI allows receiving input events from MIDI devices such as a "
-"piano. MIDI stands for Musical Instrument Digital Interface.\n"
-"MIDI signals can be sent over a 5-pin MIDI connector or over USB, if your "
-"device supports both be sure to check the settings in the device to see "
-"which output it's using.\n"
-"To receive input events from MIDI devices, you need to call [method OS."
-"open_midi_inputs]. You can check which devices are detected using [method OS."
-"get_connected_midi_inputs].\n"
-"Note that Godot does not currently support MIDI output, so there is no way "
-"to emit MIDI signals from Godot. Only MIDI input works."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid "MIDI Message Status Byte List"
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid "Wikipedia General MIDI Instrument List"
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid "Wikipedia Piano Key Frequencies List"
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"The MIDI channel of this input event. There are 16 channels, so this value "
-"ranges from 0 to 15. MIDI channel 9 is reserved for the use with percussion "
-"instruments, the rest of the channels are for non-percussion instruments."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"If the message is [code]MIDI_MESSAGE_CONTROL_CHANGE[/code], this indicates "
-"the controller number, otherwise this is zero. Controllers include devices "
-"such as pedals and levers."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"If the message is [code]MIDI_MESSAGE_CONTROL_CHANGE[/code], this indicates "
-"the controller value, otherwise this is zero. Controllers include devices "
-"such as pedals and levers."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"The instrument of this input event. This value ranges from 0 to 127. Refer "
-"to the instrument list on the General MIDI wikipedia article to see a list "
-"of instruments, except that this value is 0-index, so subtract one from "
-"every number on that chart. A standard piano will have an instrument number "
-"of 0."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"Returns a value indicating the type of message for this MIDI signal. This is "
-"a member of the [enum @GlobalScope.MidiMessageList] enum.\n"
-"For MIDI messages between 0x80 and 0xEF, only the left half of the bits are "
-"returned as this value, as the other part is the channel (ex: 0x94 becomes "
-"0x9). For MIDI messages from 0xF0 to 0xFF, the value is returned as-is.\n"
-"Notes will return [code]MIDI_MESSAGE_NOTE_ON[/code] when activated, but they "
-"might not always return [code]MIDI_MESSAGE_NOTE_OFF[/code] when deactivated, "
-"therefore your code should treat the input as stopped if some period of time "
-"has passed.\n"
-"For more information, see the MIDI message status byte list chart linked "
-"above."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"The pitch index number of this MIDI signal. This value ranges from 0 to 127. "
-"On a piano, middle C is 60, and A440 is 69, see the \"MIDI note\" column of "
-"the piano key frequency chart on Wikipedia for more information."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"The pressure of the MIDI signal. This value ranges from 0 to 127. For many "
-"devices, this value is always zero."
-msgstr ""
-
-#: doc/classes/InputEventMIDI.xml
-msgid ""
-"The velocity of the MIDI signal. This value ranges from 0 to 127. For a "
-"piano, this corresponds to how quickly the key was pressed, and is rarely "
-"above about 110 in practice."
-msgstr ""
-
-#: doc/classes/InputEventMouse.xml
-msgid "Base input event type for mouse events."
-msgstr ""
-
-#: doc/classes/InputEventMouse.xml
-msgid "Stores general mouse events information."
-msgstr ""
-
-#: doc/classes/InputEventMouse.xml
-msgid ""
-"The mouse button mask identifier, one of or a bitwise combination of the "
-"[enum ButtonList] button masks."
-msgstr ""
-
-#: doc/classes/InputEventMouse.xml
-msgid ""
-"When received in [method Node._input] or [method Node._unhandled_input], "
-"returns the mouse's position in the root [Viewport] using the coordinate "
-"system of the root [Viewport].\n"
-"When received in [method Control._gui_input], returns the mouse's position "
-"in the [CanvasLayer] that the [Control] is in using the coordinate system of "
-"the [CanvasLayer]."
-msgstr ""
-
-#: doc/classes/InputEventMouse.xml
-msgid ""
-"When received in [method Node._input] or [method Node._unhandled_input], "
-"returns the mouse's position in the [Viewport] this [Node] is in using the "
-"coordinate system of this [Viewport].\n"
-"When received in [method Control._gui_input], returns the mouse's position "
-"in the [Control] using the local coordinate system of the [Control]."
-msgstr ""
-
-#: doc/classes/InputEventMouseButton.xml
-msgid "Input event type for mouse button events."
-msgstr ""
-
-#: doc/classes/InputEventMouseButton.xml
-msgid "Contains mouse click information. See [method Node._input]."
-msgstr ""
-
-#: doc/classes/InputEventMouseButton.xml
-msgid ""
-"The mouse button identifier, one of the [enum ButtonList] button or button "
-"wheel constants."
-msgstr ""
-
-#: doc/classes/InputEventMouseButton.xml
-msgid "If [code]true[/code], the mouse button's state is a double-click."
-msgstr ""
-
-#: doc/classes/InputEventMouseButton.xml
-msgid ""
-"The amount (or delta) of the event. When used for high-precision scroll "
-"events, this indicates the scroll amount (vertical or horizontal). This is "
-"only supported on some platforms; the reported sensitivity varies depending "
-"on the platform. May be [code]0[/code] if not supported."
-msgstr ""
-
-#: doc/classes/InputEventMouseButton.xml
-msgid ""
-"If [code]true[/code], the mouse button's state is pressed. If [code]false[/"
-"code], the mouse button's state is released."
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid "Input event type for mouse motion events."
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid ""
-"Contains mouse and pen motion information. Supports relative, absolute "
-"positions and speed. See [method Node._input].\n"
-"[b]Note:[/b] The behavior of this event is affected by the value of [member "
-"Input.use_accumulated_input]. When set to [code]true[/code] (default), mouse/"
-"pen motion events received from the OS will be merged to emit an accumulated "
-"event only once per frame rendered at most. When set to [code]false[/code], "
-"the events will be emitted as received, which means that they can be emitted "
-"multiple times per frame rendered, allowing for precise input reporting at "
-"the expense of CPU usage.\n"
-"[b]Note:[/b] If you use InputEventMouseMotion to draw lines, consider "
-"implementing [url=https://en.wikipedia.org/wiki/"
-"Bresenham%27s_line_algorithm]Bresenham's line algorithm[/url] as well to "
-"avoid visible gaps in lines if the user is moving the mouse quickly."
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid "Mouse and input coordinates"
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] when using the eraser end of a stylus pen.\n"
-"[b]Note:[/b] This property is implemented on Linux, macOS and Windows."
-msgstr ""
-"Liefert [code]true[/code] wenn die Länge der Zeichenkette [code]0[/code] ist."
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid ""
-"Represents the pressure the user puts on the pen. Ranges from [code]0.0[/"
-"code] to [code]1.0[/code]."
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid ""
-"The mouse position relative to the previous position (position at the last "
-"frame).\n"
-"[b]Note:[/b] Since [InputEventMouseMotion] is only emitted when the mouse "
-"moves, the last event won't have a relative position of [code]Vector2(0, 0)[/"
-"code] when the user stops moving the mouse."
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid "The mouse speed in pixels per second."
-msgstr ""
-
-#: doc/classes/InputEventMouseMotion.xml
-msgid ""
-"Represents the angles of tilt of the pen. Positive X-coordinate value "
-"indicates a tilt to the right. Positive Y-coordinate value indicates a tilt "
-"toward the user. Ranges from [code]-1.0[/code] to [code]1.0[/code] for both "
-"axes."
-msgstr ""
-
-#: doc/classes/InputEventScreenDrag.xml
-msgid ""
-"Input event type for screen drag events. Only available on mobile devices."
-msgstr ""
-
-#: doc/classes/InputEventScreenDrag.xml
-msgid "Contains screen drag information. See [method Node._input]."
-msgstr ""
-
-#: doc/classes/InputEventScreenDrag.xml
-msgid "The drag event index in the case of a multi-drag event."
-msgstr ""
-
-#: doc/classes/InputEventScreenDrag.xml
-msgid "The drag position."
-msgstr ""
-
-#: doc/classes/InputEventScreenDrag.xml
-msgid ""
-"The drag position relative to the previous position (position at the last "
-"frame)."
-msgstr ""
-
-#: doc/classes/InputEventScreenDrag.xml
-msgid "The drag speed."
-msgstr ""
-
-#: doc/classes/InputEventScreenTouch.xml
-msgid ""
-"Input event type for screen touch events.\n"
-"(only available on mobile devices)"
-msgstr ""
-
-#: doc/classes/InputEventScreenTouch.xml
-msgid ""
-"Stores multi-touch press/release information. Supports touch press, touch "
-"release and [member index] for multi-touch count and order."
-msgstr ""
-
-#: doc/classes/InputEventScreenTouch.xml
-msgid ""
-"The touch index in the case of a multi-touch event. One index = one finger."
-msgstr ""
-
-#: doc/classes/InputEventScreenTouch.xml
-msgid "The touch position."
-msgstr ""
-
-#: doc/classes/InputEventScreenTouch.xml
-msgid ""
-"If [code]true[/code], the touch's state is pressed. If [code]false[/code], "
-"the touch's state is released."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid "Base class for keys events with modifiers."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid ""
-"Contains keys events information with modifiers support like [code]Shift[/"
-"code] or [code]Alt[/code]. See [method Node._input]."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid "State of the [code]Alt[/code] modifier."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid "State of the [code]Command[/code] modifier."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid "State of the [code]Ctrl[/code] modifier."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid "State of the [code]Meta[/code] modifier."
-msgstr ""
-
-#: doc/classes/InputEventWithModifiers.xml
-msgid "State of the [code]Shift[/code] modifier."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid "Singleton that manages [InputEventAction]."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Manages all [InputEventAction] which can be created/modified from the "
-"project settings menu [b]Project > Project Settings > Input Map[/b] or in "
-"code with [method add_action] and [method action_add_event]. See [method "
-"Node._input]."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Adds an [InputEvent] to an action. This [InputEvent] will trigger the action."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid "Removes an [InputEvent] from an action."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid "Removes all events from an action."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-#, fuzzy
-msgid "Returns a deadzone value for the action."
-msgstr "Gibt den absoluten Betrag des Parameters zurück."
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Returns [code]true[/code] if the action has the given [InputEvent] "
-"associated with it."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid "Sets a deadzone value for the action."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Adds an empty action to the [InputMap] with a configurable [code]deadzone[/"
-"code].\n"
-"An [InputEvent] can then be added to this action with [method "
-"action_add_event]."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid "Removes an action from the [InputMap]."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Returns [code]true[/code] if the given event is part of an existing action. "
-"This method ignores keyboard modifiers if the given [InputEvent] is not "
-"pressed (for proper release detection). See [method action_has_event] if you "
-"don't want this behavior.\n"
-"If [code]exact_match[/code] is [code]false[/code], it ignores additional "
-"input modifiers for [InputEventKey] and [InputEventMouseButton] events, and "
-"the direction for [InputEventJoypadMotion] events."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Returns an array of [InputEvent]s associated with a given action.\n"
-"[b]Note:[/b] When used in the editor (e.g. a tool script or [EditorPlugin]), "
-"this method will return events for the editor action. If you want to access "
-"your project's input binds from the editor, read the [code]input/*[/code] "
-"settings from [ProjectSettings]."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid "Returns an array of all actions in the [InputMap]."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Returns [code]true[/code] if the [InputMap] has a registered action with the "
-"given name."
-msgstr ""
-
-#: doc/classes/InputMap.xml
-msgid ""
-"Clears all [InputEventAction] in the [InputMap] and load it anew from "
-"[ProjectSettings]."
-msgstr ""
-
-#: doc/classes/InstancePlaceholder.xml
-msgid "Placeholder for the root [Node] of a [PackedScene]."
-msgstr ""
-
-#: doc/classes/InstancePlaceholder.xml
-msgid ""
-"Turning on the option [b]Load As Placeholder[/b] for an instanced scene in "
-"the editor causes it to be replaced by an InstancePlaceholder when running "
-"the game. This makes it possible to delay actually loading the scene until "
-"calling [method replace_by_instance]. This is useful to avoid loading large "
-"scenes all at once by loading parts of it selectively.\n"
-"The InstancePlaceholder does not have a transform. This causes any child "
-"nodes to be positioned relatively to the Viewport from point (0,0), rather "
-"than their parent as displayed in the editor. Replacing the placeholder with "
-"a scene with a transform will transform children relatively to their parent "
-"again."
-msgstr ""
-
-#: doc/classes/InstancePlaceholder.xml
-msgid ""
-"Call this method to actually load in the node. The created node will be "
-"placed as a sibling [i]above[/i] the [InstancePlaceholder] in the scene "
-"tree. The [Node]'s reference is also returned for convenience.\n"
-"[b]Note:[/b] [method create_instance] is not thread-safe. Use [method Object."
-"call_deferred] if calling from a thread."
-msgstr ""
-
-#: doc/classes/InstancePlaceholder.xml
-msgid ""
-"Gets the path to the [PackedScene] resource file that is loaded by default "
-"when calling [method replace_by_instance]. Not thread-safe. Use [method "
-"Object.call_deferred] if calling from a thread."
-msgstr ""
-
-#: doc/classes/InstancePlaceholder.xml
-msgid ""
-"Returns the list of properties that will be applied to the node when [method "
-"create_instance] is called.\n"
-"If [code]with_order[/code] is [code]true[/code], a key named [code].order[/"
-"code] (note the leading period) is added to the dictionary. This [code]."
-"order[/code] key is an [Array] of [String] property names specifying the "
-"order in which properties will be applied (with index 0 being the first)."
-msgstr ""
-
-#: doc/classes/InstancePlaceholder.xml
-msgid ""
-"Replaces this placeholder by the scene handed as an argument, or the "
-"original scene if no argument is given. As for all resources, the scene is "
-"loaded only if it's not loaded already. By manually loading the scene "
-"beforehand, delays caused by this function can be avoided."
-msgstr ""
-
-#: doc/classes/int.xml
-msgid "Integer built-in type."
-msgstr ""
-
-#: doc/classes/int.xml
-msgid ""
-"Signed 64-bit integer type.\n"
-"It can take values in the interval [code][-2^63, 2^63 - 1][/code], i.e. "
-"[code][-9223372036854775808, 9223372036854775807][/code]. Exceeding those "
-"bounds will wrap around.\n"
-"[int] is a [Variant] type, and will thus be used when assigning an integer "
-"value to a [Variant]. It can also be enforced with the [code]: int[/code] "
-"type hint.\n"
-"[codeblock]\n"
-"var my_variant = 0 # int, value 0.\n"
-"my_variant += 4.2 # float, value 4.2.\n"
-"var my_int: int = 1 # int, value 1.\n"
-"my_int = 4.2 # int, value 4, the right value is implicitly cast to int.\n"
-"my_int = int(\"6.7\") # int, value 6, the String is explicitly cast with "
-"int.\n"
-"\n"
-"var max_int = 9223372036854775807\n"
-"print(max_int) # 9223372036854775807, OK.\n"
-"max_int += 1\n"
-"print(max_int) # -9223372036854775808, we overflowed and wrapped around.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/int.xml
-msgid ""
-"Cast a [bool] value to an integer value, [code]int(true)[/code] will be "
-"equals to 1 and [code]int(false)[/code] will be equals to 0."
-msgstr ""
-
-#: doc/classes/int.xml
-msgid ""
-"Cast a float value to an integer value, this method simply removes the "
-"number fractions (i.e. rounds [code]from[/code] towards zero), so for "
-"example [code]int(2.7)[/code] will be equals to 2, [code]int(0.1)[/code] "
-"will be equals to 0 and [code]int(-2.7)[/code] will be equals to -2. This "
-"operation is also called truncation."
-msgstr ""
-
-#: doc/classes/int.xml
-msgid ""
-"Cast a [String] value to an integer value, this method is an integer parser "
-"from a string, so calling this method with an invalid integer string will "
-"return 0, a valid string will be something like [code]'1.7'[/code]. This "
-"method will ignore all non-number characters, so calling [code]int('1e3')[/"
-"code] will return 13."
-msgstr ""
-
-#: doc/classes/InterpolatedCamera.xml
-msgid "[i]Deprecated.[/i] Camera which moves toward another node."
-msgstr ""
-
-#: doc/classes/InterpolatedCamera.xml
-msgid ""
-"[i]Deprecated (will be removed in Godot 4.0).[/i] InterpolatedCamera is a "
-"[Camera] which smoothly moves to match a target node's position and "
-"rotation.\n"
-"If it is not [member enabled] or does not have a valid target set, "
-"InterpolatedCamera acts like a normal Camera."
-msgstr ""
-
-#: doc/classes/InterpolatedCamera.xml
-#, fuzzy
-msgid "Sets the node to move toward and orient with."
-msgstr "Legt das übergebene Node als das Ende des Graphen fest."
-
-#: doc/classes/InterpolatedCamera.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], and a target is set, the camera will move "
-"automatically."
-msgstr ""
-"Wenn [code]true[/code], wird die Sub-Animation nach Beendigung automatisch "
-"neu gestartet."
-
-#: doc/classes/InterpolatedCamera.xml
-msgid ""
-"The camera's process callback. See [enum InterpolatedCameraProcessMode]."
-msgstr ""
-
-#: doc/classes/InterpolatedCamera.xml
-msgid ""
-"How quickly the camera moves toward its target. Higher values will result in "
-"tighter camera motion."
-msgstr ""
-
-#: doc/classes/InterpolatedCamera.xml
-msgid "The target's [NodePath]."
-msgstr ""
-
-#: doc/classes/IntervalTweener.xml
-msgid "Creates an idle interval in a [SceneTreeTween] animation."
-msgstr ""
-
-#: doc/classes/IntervalTweener.xml
-msgid ""
-"[IntervalTweener] is used to make delays in a tweening sequence. See [method "
-"SceneTreeTween.tween_interval] for more usage information.\n"
-"[b]Note:[/b] [method SceneTreeTween.tween_interval] is the only correct way "
-"to create [IntervalTweener]. Any [IntervalTweener] created manually will not "
-"function correctly."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "Internet protocol (IP) support functions such as DNS resolution."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"IP contains support functions for the Internet Protocol (IP). TCP/IP support "
-"is in different classes (see [StreamPeerTCP] and [TCP_Server]). IP provides "
-"DNS hostname resolution support, both blocking and threaded."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Removes all of a [code]hostname[/code]'s cached references. If no "
-"[code]hostname[/code] is given, all cached IP addresses are removed."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Removes a given item [code]id[/code] from the queue. This should be used to "
-"free a queue after it has completed to enable more queries to happen."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "Returns all the user's current IPv4 and IPv6 addresses as an array."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Returns all network adapters as an array.\n"
-"Each adapter is a dictionary of the form:\n"
-"[codeblock]\n"
-"{\n"
-"    \"index\": \"1\", # Interface index.\n"
-"    \"name\": \"eth0\", # Interface name.\n"
-"    \"friendly\": \"Ethernet One\", # A friendly name (might be empty).\n"
-"    \"addresses\": [\"192.168.1.101\"], # An array of IP addresses "
-"associated to this interface.\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Returns a queued hostname's IP address, given its queue [code]id[/code]. "
-"Returns an empty string on error or if resolution hasn't happened yet (see "
-"[method get_resolve_item_status])."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Return resolved addresses, or an empty array if an error happened or "
-"resolution didn't happen yet (see [method get_resolve_item_status])."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Returns a queued hostname's status as a [enum ResolverStatus] constant, "
-"given its queue [code]id[/code]."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Returns a given hostname's IPv4 or IPv6 address when resolved (blocking-type "
-"method). The address type returned depends on the [enum Type] constant given "
-"as [code]ip_type[/code]."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Resolves a given hostname in a blocking way. Addresses are returned as an "
-"[Array] of IPv4 or IPv6 depending on [code]ip_type[/code]."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Creates a queue item to resolve a hostname to an IPv4 or IPv6 address "
-"depending on the [enum Type] constant given as [code]ip_type[/code]. Returns "
-"the queue ID if successful, or [constant RESOLVER_INVALID_ID] on error."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "DNS hostname resolver status: No status."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "DNS hostname resolver status: Waiting."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "DNS hostname resolver status: Done."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "DNS hostname resolver status: Error."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Maximum number of concurrent DNS resolver queries allowed, [constant "
-"RESOLVER_INVALID_ID] is returned if exceeded."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid ""
-"Invalid ID constant. Returned if [constant RESOLVER_MAX_QUERIES] is exceeded."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "Address type: None."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "Address type: Internet protocol version 4 (IPv4)."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "Address type: Internet protocol version 6 (IPv6)."
-msgstr ""
-
-#: doc/classes/IP.xml
-msgid "Address type: Any."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Control that provides a list of selectable items (and/or icons) in a single "
-"column, or optionally in multiple columns."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"This control provides a selectable list of items that may be in a single (or "
-"multiple columns) with option of text, icons, or both text and icon. "
-"Tooltips are supported and may be different for every item in the list.\n"
-"Selectable items in the list may be selected or deselected and multiple "
-"selection may be enabled. Selection with right mouse button may also be "
-"enabled to allow use of popup context menus. Items may also be \"activated\" "
-"by double-clicking them or by pressing Enter.\n"
-"Item text only supports single-line strings, newline characters (e.g. "
-"[code]\\n[/code]) in the string won't produce a newline. Text wrapping is "
-"enabled in [constant ICON_MODE_TOP] mode, but column's width is adjusted to "
-"fully fit its content by default. You need to set [member "
-"fixed_column_width] greater than zero to wrap the text.\n"
-"[b]Incremental search:[/b] Like [PopupMenu] and [Tree], [ItemList] supports "
-"searching within the list while the control is focused. Press a key that "
-"matches the first letter of an item's name to select the first item starting "
-"with the given letter. After that point, there are two ways to perform "
-"incremental search: 1) Press the same key again before the timeout duration "
-"to select the next item starting with the same letter. 2) Press letter keys "
-"that match the rest of the word before the timeout duration to match to "
-"select the item in question directly. Both of these actions will be reset to "
-"the beginning of the list if the timeout duration has passed since the last "
-"keystroke was registered. You can adjust the timeout duration by changing "
-"[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Adds an item to the item list with no text, only an icon."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Adds an item to the item list with specified text. Specify an [code]icon[/"
-"code], or use [code]null[/code] as the [code]icon[/code] for a list item "
-"with no icon.\n"
-"If selectable is [code]true[/code], the list item will be selectable."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Removes all items from the list."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Ensure current selection is visible, adjusting the scroll position as "
-"necessary."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns the item index at the given [code]position[/code].\n"
-"When there is no item at that point, -1 will be returned if [code]exact[/"
-"code] is [code]true[/code], and the closest item index will be returned "
-"otherwise."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns the number of items currently in the list."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns the custom background color of the item specified by [code]idx[/"
-"code] index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns the custom foreground color of the item specified by [code]idx[/"
-"code] index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns the icon associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns a [Color] modulating item's icon at the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns the region of item's icon used. The whole icon will be used if the "
-"region has no area."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns the metadata value of the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns the text associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns the tooltip hint associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns an array with the indexes of the selected items."
-msgstr ""
-
-#: doc/classes/ItemList.xml doc/classes/RichTextLabel.xml
-msgid ""
-"Returns the vertical scrollbar.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Returns [code]true[/code] if one or more items are selected."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns [code]true[/code] if the item at the specified index is disabled."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns [code]true[/code] if the item icon will be drawn transposed, i.e. "
-"the X and Y axes are swapped."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns [code]true[/code] if the item at the specified index is selectable."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns [code]true[/code] if the tooltip is enabled for specified item index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Returns [code]true[/code] if the item at the specified index is currently "
-"selected."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Moves item from index [code]from_idx[/code] to [code]to_idx[/code]."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Removes the item specified by [code]idx[/code] index from the list."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Select the item at the specified index.\n"
-"[b]Note:[/b] This method does not trigger the item selection signal."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Sets the background color of the item specified by [code]idx[/code] index to "
-"the specified [Color]."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Sets the foreground color of the item specified by [code]idx[/code] index to "
-"the specified [Color]."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Disables (or enables) the item at the specified index.\n"
-"Disabled items cannot be selected and do not trigger activation signals "
-"(when double-clicking or pressing Enter)."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Sets (or replaces) the icon's [Texture] associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Sets a modulating [Color] of the item associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Sets the region of item's icon used. The whole icon will be used if the "
-"region has no area."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Sets whether the item icon will be drawn transposed."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Sets a value (of any type) to be stored with the item associated with the "
-"specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Allows or disallows selection of the item associated with the specified "
-"index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Sets text of the item associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Sets the tooltip hint for the item associated with the specified index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Sets whether the tooltip hint is enabled for specified item index."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Sorts items in the list by their text."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Ensures the item associated with the specified index is not selected."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Ensures there are no items selected."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"If [code]true[/code], the currently selected item can be selected again."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "If [code]true[/code], right mouse button click can select items."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"If [code]true[/code], the control will automatically resize the height to "
-"fit its content."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"The width all columns will be adjusted to.\n"
-"A value of zero disables the adjustment, each item will have a width equal "
-"to the width of its content and the columns will have an uneven width."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"The size all icons will be adjusted to.\n"
-"If either X or Y component is not greater than zero, icon size won't be "
-"affected."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"The icon position, whether above or to the left of the text. See the [enum "
-"IconMode] constants."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"The scale of icon applied after [member fixed_icon_size] and transposing "
-"takes effect."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Maximum columns the list will have.\n"
-"If greater than zero, the content will be split among the specified "
-"columns.\n"
-"A value of zero means unlimited columns, i.e. all items will be put in the "
-"same row."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Maximum lines of text allowed in each item. Space will be reserved even when "
-"there is not enough lines of text to display.\n"
-"[b]Note:[/b] This property takes effect only when [member icon_mode] is "
-"[constant ICON_MODE_TOP]. To make the text wrap, [member fixed_column_width] "
-"should be greater than zero."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Whether all columns will have the same width.\n"
-"If [code]true[/code], the width is equal to the largest column width of all "
-"columns."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Allows single or multiple item selection. See the [enum SelectMode] "
-"constants."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Triggered when specified list item is activated via double-clicking or by "
-"pressing Enter."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Triggered when specified list item has been selected via right mouse "
-"clicking.\n"
-"The click position is also provided to allow appropriate popup of context "
-"menus at the correct location.\n"
-"[member allow_rmb_select] must be enabled."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Triggered when specified item has been selected.\n"
-"[member allow_reselect] must be enabled to reselect an item."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Triggered when a multiple selection is altered on a list allowing multiple "
-"selection."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Triggered when a left mouse click is issued within the rect of the list but "
-"on empty space."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Triggered when a right mouse click is issued within the rect of the list but "
-"on empty space.\n"
-"[member allow_rmb_select] must be enabled."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Icon is drawn above the text."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Icon is drawn to the left of the text."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Only allow selecting a single item."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "Allows selecting multiple items by holding Ctrl or Shift."
-msgstr ""
-
-#: doc/classes/ItemList.xml doc/classes/Tree.xml
-msgid "Default text [Color] of the item."
-msgstr ""
-
-#: doc/classes/ItemList.xml doc/classes/Tree.xml
-msgid "Text [Color] used when the item is selected."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"[Color] of the guideline. The guideline is a line drawn between each row of "
-"items."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "The horizontal spacing between items."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "The spacing between item's icon and text."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "The vertical spacing between each line of text."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "The vertical spacing between items."
-msgstr ""
-
-#: doc/classes/ItemList.xml doc/classes/Tree.xml
-msgid "[Font] of the item's text."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"Default [StyleBox] for the [ItemList], i.e. used when the control is not "
-"being focused."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "[StyleBox] used when the [ItemList] is being focused."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid "[StyleBox] used for the cursor, when the [ItemList] is being focused."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"[StyleBox] used for the cursor, when the [ItemList] is not being focused."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"[StyleBox] for the selected items, used when the [ItemList] is not being "
-"focused."
-msgstr ""
-
-#: doc/classes/ItemList.xml
-msgid ""
-"[StyleBox] for the selected items, used when the [ItemList] is being focused."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Singleton that connects the engine with the browser's JavaScript context in "
-"HTML5 export."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"The JavaScript singleton is implemented only in the HTML5 export. It's used "
-"to access the browser's JavaScript context. This allows interaction with "
-"embedding pages or calling third-party JavaScript APIs.\n"
-"[b]Note:[/b] This singleton can be disabled at build-time to improve "
-"security. By default, the JavaScript singleton is enabled. Official export "
-"templates also have the JavaScript singleton enabled. See [url=$DOCS_URL/"
-"development/compiling/compiling_for_web.html]Compiling for the Web[/url] in "
-"the documentation for more information."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Creates a reference to a script function that can be used as a callback by "
-"JavaScript. The reference must be kept until the callback happens, or it "
-"won't be called at all. See [JavaScriptObject] for usage."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Creates a new JavaScript object using the [code]new[/code] constructor. The "
-"[code]object[/code] must a valid property of the JavaScript [code]window[/"
-"code]. See [JavaScriptObject] for usage."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Prompts the user to download a file containing the specified [code]buffer[/"
-"code]. The file will have the given [code]name[/code] and [code]mime[/code] "
-"type.\n"
-"[b]Note:[/b] The browser may override the [url=https://en.wikipedia.org/wiki/"
-"Media_type]MIME type[/url] provided based on the file [code]name[/code]'s "
-"extension.\n"
-"[b]Note:[/b] Browsers might block the download if [method download_buffer] "
-"is not being called from a user interaction (e.g. button click).\n"
-"[b]Note:[/b] Browsers might ask the user for permission or block the "
-"download if multiple download requests are made in a quick succession."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Execute the string [code]code[/code] as JavaScript code within the browser "
-"window. This is a call to the actual global JavaScript function [code]eval()"
-"[/code].\n"
-"If [code]use_global_execution_context[/code] is [code]true[/code], the code "
-"will be evaluated in the global execution context. Otherwise, it is "
-"evaluated in the execution context of a function within the engine's runtime "
-"environment."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Returns an interface to a JavaScript object that can be used by scripts. The "
-"[code]interface[/code] must be a valid property of the JavaScript "
-"[code]window[/code]. The callback must accept a single [Array] argument, "
-"which will contain the JavaScript [code]arguments[/code]. See "
-"[JavaScriptObject] for usage."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Returns [code]true[/code] if a new version of the progressive web app is "
-"waiting to be activated.\n"
-"[b]Note:[/b] Only relevant when exported as a Progressive Web App."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Performs the live update of the progressive web app. Forcing the new version "
-"to be installed and the page to be reloaded.\n"
-"[b]Note:[/b] Your application will be [b]reloaded in all browser tabs[/b].\n"
-"[b]Note:[/b] Only relevant when exported as a Progressive Web App and "
-"[method pwa_needs_update] returns [code]true[/code]."
-msgstr ""
-
-#: doc/classes/JavaScript.xml
-msgid ""
-"Emitted when an update for this progressive web app has been detected but is "
-"waiting to be activated because a previous version is active. See [method "
-"pwa_update] to force the update to take place immediately."
-msgstr ""
-
-#: doc/classes/JavaScriptObject.xml
-msgid "A wrapper class for native JavaScript objects."
-msgstr ""
-
-#: doc/classes/JavaScriptObject.xml
-msgid ""
-"JavaScriptObject is used to interact with JavaScript objects retrieved or "
-"created via [method JavaScript.get_interface], [method JavaScript."
-"create_object], or [method JavaScript.create_callback].\n"
-"Example:\n"
-"[codeblock]\n"
-"extends Node\n"
-"\n"
-"var _my_js_callback = JavaScript.create_callback(self, \"myCallback\") # "
-"This reference must be kept\n"
-"var console = JavaScript.get_interface(\"console\")\n"
-"\n"
-"func _init():\n"
-"    var buf = JavaScript.create_object(\"ArrayBuffer\", 10) # new "
-"ArrayBuffer(10)\n"
-"    print(buf) # prints [JavaScriptObject:OBJECT_ID]\n"
-"    var uint8arr = JavaScript.create_object(\"Uint8Array\", buf) # new "
-"Uint8Array(buf)\n"
-"    uint8arr[1] = 255\n"
-"    prints(uint8arr[1], uint8arr.byteLength) # prints 255 10\n"
-"    console.log(uint8arr) # prints in browser console \"Uint8Array(10) [ 0, "
-"255, 0, 0, 0, 0, 0, 0, 0, 0 ]\"\n"
-"\n"
-"    # Equivalent of JavaScript: Array.from(uint8arr).forEach(myCallback)\n"
-"    JavaScript.get_interface(\"Array\").from(uint8arr)."
-"forEach(_my_js_callback)\n"
-"\n"
-"func myCallback(args):\n"
-"    # Will be called with the parameters passed to the \"forEach\" callback\n"
-"    # [0, 0, [JavaScriptObject:1173]]\n"
-"    # [255, 1, [JavaScriptObject:1173]]\n"
-"    # ...\n"
-"    # [0, 9, [JavaScriptObject:1180]]\n"
-"    print(args)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Only available in the HTML5 platform."
-msgstr ""
-
-#: doc/classes/JNISingleton.xml
-msgid ""
-"Singleton that connects the engine with Android plugins to interface with "
-"native Android code."
-msgstr ""
-
-#: doc/classes/JNISingleton.xml
-msgid ""
-"The JNISingleton is implemented only in the Android export. It's used to "
-"call methods and connect signals from an Android plugin written in Java or "
-"Kotlin. Methods and signals can be called and connected to the JNISingleton "
-"as if it is a Node. See [url=https://en.wikipedia.org/wiki/"
-"Java_Native_Interface]Java Native Interface - Wikipedia[/url] for more "
-"information."
-msgstr ""
-
-#: doc/classes/JNISingleton.xml
-msgid "Creating Android plugins"
-msgstr ""
-
-#: doc/classes/Joint.xml
-msgid "Base class for all 3D joints."
-msgstr ""
-
-#: doc/classes/Joint.xml
-msgid ""
-"Joints are used to bind together two physics bodies. They have a solver "
-"priority and can define if the bodies of the two attached nodes should be "
-"able to collide with each other."
-msgstr ""
-
-#: doc/classes/Joint.xml doc/classes/RigidBody.xml doc/classes/VehicleBody.xml
-#: doc/classes/VehicleWheel.xml
-msgid "3D Truck Town Demo"
-msgstr ""
-
-#: doc/classes/Joint.xml
-msgid ""
-"If [code]true[/code], the two bodies of the nodes are not able to collide "
-"with each other."
-msgstr ""
-
-#: doc/classes/Joint.xml
-msgid "The node attached to the first side (A) of the joint."
-msgstr ""
-
-#: doc/classes/Joint.xml
-msgid "The node attached to the second side (B) of the joint."
-msgstr ""
-
-#: doc/classes/Joint.xml
-msgid ""
-"The priority used to define which solver is executed first for multiple "
-"joints. The lower the value, the higher the priority."
-msgstr ""
-
-#: doc/classes/Joint2D.xml
-msgid "Base node for all joint constraints in 2D physics."
-msgstr ""
-
-#: doc/classes/Joint2D.xml
-msgid ""
-"Base node for all joint constraints in 2D physics. Joints take 2 bodies and "
-"apply a custom constraint."
-msgstr ""
-
-#: doc/classes/Joint2D.xml
-msgid ""
-"When [member node_a] and [member node_b] move in different directions the "
-"[code]bias[/code] controls how fast the joint pulls them back to their "
-"original position. The lower the [code]bias[/code] the more the two bodies "
-"can pull on the joint."
-msgstr ""
-
-#: doc/classes/Joint2D.xml
-msgid ""
-"If [code]true[/code], [member node_a] and [member node_b] can not collide."
-msgstr ""
-
-#: doc/classes/Joint2D.xml
-msgid "The first body attached to the joint. Must derive from [PhysicsBody2D]."
-msgstr ""
-
-#: doc/classes/Joint2D.xml
-msgid ""
-"The second body attached to the joint. Must derive from [PhysicsBody2D]."
-msgstr ""
-
-#: doc/classes/JSON.xml
-msgid "Helper class for parsing JSON data."
-msgstr ""
-
-#: doc/classes/JSON.xml
-msgid ""
-"Helper class for parsing JSON data. For usage example and other important "
-"hints, see [JSONParseResult]."
-msgstr ""
-
-#: doc/classes/JSON.xml
-msgid ""
-"Parses a JSON-encoded string and returns a [JSONParseResult] containing the "
-"result."
-msgstr ""
-
-#: doc/classes/JSON.xml
-msgid ""
-"Converts a [Variant] var to JSON text and returns the result. Useful for "
-"serializing data to store or send over the network.\n"
-"[b]Note:[/b] The JSON specification does not define integer or float types, "
-"but only a [i]number[/i] type. Therefore, converting a Variant to JSON text "
-"will convert all numerical values to [float] types.\n"
-"The [code]indent[/code] parameter controls if and how something is indented, "
-"the string used for this parameter will be used where there should be an "
-"indent in the output, even spaces like [code]\"   \"[/code] will work. "
-"[code]\\t[/code] and [code]\\n[/code] can also be used for a tab indent, or "
-"to make a newline for each indent respectively.\n"
-"[b]Example output:[/b]\n"
-"[codeblock]\n"
-"## JSON.print(my_dictionary)\n"
-"{\"name\":\"my_dictionary\",\"version\":\"1.0.0\",\"entities\":[{\"name\":"
-"\"entity_0\",\"value\":\"value_0\"},{\"name\":\"entity_1\",\"value\":"
-"\"value_1\"}]}\n"
-"\n"
-"## JSON.print(my_dictionary, \"\\t\")\n"
-"{\n"
-"    \"name\": \"my_dictionary\",\n"
-"    \"version\": \"1.0.0\",\n"
-"    \"entities\": [\n"
-"        {\n"
-"            \"name\": \"entity_0\",\n"
-"            \"value\": \"value_0\"\n"
-"        },\n"
-"        {\n"
-"            \"name\": \"entity_1\",\n"
-"            \"value\": \"value_1\"\n"
-"        }\n"
-"    ]\n"
-"}\n"
-"\n"
-"## JSON.print(my_dictionary, \"...\")\n"
-"{\n"
-"...\"name\": \"my_dictionary\",\n"
-"...\"version\": \"1.0.0\",\n"
-"...\"entities\": [\n"
-"......{\n"
-".........\"name\": \"entity_0\",\n"
-".........\"value\": \"value_0\"\n"
-"......},\n"
-"......{\n"
-".........\"name\": \"entity_1\",\n"
-".........\"value\": \"value_1\"\n"
-"......}\n"
-"...]\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/JSONParseResult.xml
-msgid "Data class wrapper for decoded JSON."
-msgstr ""
-
-#: doc/classes/JSONParseResult.xml
-msgid ""
-"Returned by [method JSON.parse], [JSONParseResult] contains the decoded JSON "
-"or error information if the JSON source wasn't successfully parsed. You can "
-"check if the JSON source was successfully parsed with [code]if json_result."
-"error == OK[/code]."
-msgstr ""
-
-#: doc/classes/JSONParseResult.xml
-msgid ""
-"The error type if the JSON source was not successfully parsed. See the [enum "
-"Error] constants."
-msgstr ""
-
-#: doc/classes/JSONParseResult.xml
-msgid ""
-"The line number where the error occurred if the JSON source was not "
-"successfully parsed."
-msgstr ""
-
-#: doc/classes/JSONParseResult.xml
-msgid ""
-"The error message if the JSON source was not successfully parsed. See the "
-"[enum Error] constants."
-msgstr ""
-
-#: doc/classes/JSONParseResult.xml
-msgid ""
-"A [Variant] containing the parsed JSON. Use [method @GDScript.typeof] or the "
-"[code]is[/code] keyword to check if it is what you expect. For example, if "
-"the JSON source starts with curly braces ([code]{}[/code]), a [Dictionary] "
-"will be returned. If the JSON source starts with brackets ([code][][/code]), "
-"an [Array] will be returned.\n"
-"[b]Note:[/b] The JSON specification does not define integer or float types, "
-"but only a [i]number[/i] type. Therefore, parsing a JSON text will convert "
-"all numerical values to [float] types.\n"
-"[b]Note:[/b] JSON objects do not preserve key order like Godot dictionaries, "
-"thus, you should not rely on keys being in a certain order if a dictionary "
-"is constructed from JSON. In contrast, JSON arrays retain the order of their "
-"elements:\n"
-"[codeblock]\n"
-"var p = JSON.parse('[\"hello\", \"world\", \"!\"]')\n"
-"if typeof(p.result) == TYPE_ARRAY:\n"
-"    print(p.result[0]) # Prints \"hello\"\n"
-"else:\n"
-"    push_error(\"Unexpected results.\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid "A helper to handle dictionaries which look like JSONRPC documents."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"[url=https://www.jsonrpc.org/]JSON-RPC[/url] is a standard which wraps a "
-"method call in a [JSON] object. The object has a particular structure and "
-"identifies which method is called, the parameters to that function, and "
-"carries an ID to keep track of responses. This class implements that "
-"standard on top of [Dictionary]; you will have to convert between a "
-"[Dictionary] and [JSON] with other functions."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"Returns a dictionary in the form of a JSON-RPC notification. Notifications "
-"are one-shot messages which do not expect a response.\n"
-"- [code]method[/code]: Name of the method being called.\n"
-"- [code]params[/code]: An array or dictionary of parameters being passed to "
-"the method."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"Returns a dictionary in the form of a JSON-RPC request. Requests are sent to "
-"a server with the expectation of a response. The ID field is used for the "
-"server to specify which exact request it is responding to.\n"
-"- [code]method[/code]: Name of the method being called.\n"
-"- [code]params[/code]: An array or dictionary of parameters being passed to "
-"the method.\n"
-"- [code]id[/code]: Uniquely identifies this request. The server is expected "
-"to send a response with the same ID."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"When a server has received and processed a request, it is expected to send a "
-"response. If you did not want a response then you need to have sent a "
-"Notification instead.\n"
-"- [code]result[/code]: The return value of the function which was called.\n"
-"- [code]id[/code]: The ID of the request this response is targeted to."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"Creates a response which indicates a previous reply has failed in some way.\n"
-"- [code]code[/code]: The error code corresponding to what kind of error this "
-"is. See the [enum ErrorCode] constants.\n"
-"- [code]message[/code]: A custom message about this error.\n"
-"- [code]id[/code]: The request this error is a response to."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"Given a Dictionary which takes the form of a JSON-RPC request: unpack the "
-"request and run it. Methods are resolved by looking at the field called "
-"\"method\" and looking for an equivalently named function in the JSONRPC "
-"object. If one is found that method is called.\n"
-"To add new supported methods extend the JSONRPC class and call [method "
-"process_action] on your subclass.\n"
-"[code]action[/code]: The action to be run, as a Dictionary in the form of a "
-"JSON-RPC request or notification."
-msgstr ""
-
-#: doc/classes/JSONRPC.xml
-msgid ""
-"A method call was requested but no function of that name existed in the "
-"JSONRPC subclass."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid "Kinematic body 3D node."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Kinematic bodies are special types of bodies that are meant to be user-"
-"controlled. They are not affected by physics at all; to other types of "
-"bodies, such as a character or a rigid body, these are the same as a static "
-"body. However, they have two main uses:\n"
-"[b]Simulated motion:[/b] When these bodies are moved manually, either from "
-"code or from an [AnimationPlayer] (with [member AnimationPlayer."
-"playback_process_mode] set to \"physics\"), the physics will automatically "
-"compute an estimate of their linear and angular velocity. This makes them "
-"very useful for moving platforms or other AnimationPlayer-controlled objects "
-"(like a door, a bridge that opens, etc).\n"
-"[b]Kinematic characters:[/b] KinematicBody also has an API for moving "
-"objects (the [method move_and_collide] and [method move_and_slide] methods) "
-"while performing collision tests. This makes them really useful to implement "
-"characters that collide against a world, but don't require advanced physics."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid "Kinematic character (2D)"
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the specified [code]axis[/code] is locked. See "
-"also [member move_lock_x], [member move_lock_y] and [member move_lock_z]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das angegebene [code]Plugin[/code] "
-"aktiviert ist. Der Plugin-Name ist derselbe wie sein Verzeichnisname."
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Returns the floor's collision angle at the last collision point according to "
-"[code]up_direction[/code], which is [code]Vector3.UP[/code] by default. This "
-"value is always positive and only valid after calling [method "
-"move_and_slide] and when [method is_on_floor] returns [code]true[/code]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns the surface normal of the floor at the last collision point. Only "
-"valid after calling [method move_and_slide] or [method "
-"move_and_slide_with_snap] and when [method is_on_floor] returns [code]true[/"
-"code]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns the linear velocity of the floor at the last collision point. Only "
-"valid after calling [method move_and_slide] or [method "
-"move_and_slide_with_snap] and when [method is_on_floor] returns [code]true[/"
-"code]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Returns a [KinematicCollision], which contains information about the latest "
-"collision that occurred during the last call to [method move_and_slide]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Returns a [KinematicCollision], which contains information about a collision "
-"that occurred during the last call to [method move_and_slide] or [method "
-"move_and_slide_with_snap]. Since the body can collide several times in a "
-"single call to [method move_and_slide], you must specify the index of the "
-"collision in the range 0 to ([method get_slide_count] - 1)."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns the number of times the body collided and changed direction during "
-"the last call to [method move_and_slide] or [method "
-"move_and_slide_with_snap]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns [code]true[/code] if the body collided with the ceiling on the last "
-"call of [method move_and_slide] or [method move_and_slide_with_snap]. "
-"Otherwise, returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns [code]true[/code] if the body collided with the floor on the last "
-"call of [method move_and_slide] or [method move_and_slide_with_snap]. "
-"Otherwise, returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns [code]true[/code] if the body collided with a wall on the last call "
-"of [method move_and_slide] or [method move_and_slide_with_snap]. Otherwise, "
-"returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Moves the body along the vector [code]rel_vec[/code]. The body will stop if "
-"it collides. Returns a [KinematicCollision], which contains information "
-"about the collision when stopped, or when touching another body along the "
-"motion.\n"
-"If [code]test_only[/code] is [code]true[/code], the body does not move but "
-"the would-be collision information is given."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Moves the body along a vector. If the body collides with another, it will "
-"slide along the other body rather than stop immediately. If the other body "
-"is a [KinematicBody] or [RigidBody], it will also be affected by the motion "
-"of the other body. You can use this to make moving and rotating platforms, "
-"or to make nodes push other nodes.\n"
-"This method should be used in [method Node._physics_process] (or in a method "
-"called by [method Node._physics_process]), as it uses the physics step's "
-"[code]delta[/code] value automatically in calculations. Otherwise, the "
-"simulation will run at an incorrect speed.\n"
-"[code]linear_velocity[/code] is the velocity vector (typically meters per "
-"second). Unlike in [method move_and_collide], you should [i]not[/i] multiply "
-"it by [code]delta[/code] — the physics engine handles applying the "
-"velocity.\n"
-"[code]up_direction[/code] is the up direction, used to determine what is a "
-"wall and what is a floor or a ceiling. If set to the default value of "
-"[code]Vector3(0, 0, 0)[/code], everything is considered a wall.\n"
-"If [code]stop_on_slope[/code] is [code]true[/code], body will not slide on "
-"slopes when you include gravity in [code]linear_velocity[/code] and the body "
-"is standing still.\n"
-"If the body collides, it will change direction a maximum of "
-"[code]max_slides[/code] times before it stops.\n"
-"[code]floor_max_angle[/code] is the maximum angle (in radians) where a slope "
-"is still considered a floor (or a ceiling), rather than a wall. The default "
-"value equals 45 degrees.\n"
-"If [code]infinite_inertia[/code] is [code]true[/code], body will be able to "
-"push [RigidBody] nodes, but it won't also detect any collisions with them. "
-"If [code]false[/code], it will interact with [RigidBody] nodes like with "
-"[StaticBody].\n"
-"Returns the [code]linear_velocity[/code] vector, rotated and/or scaled if a "
-"slide collision occurred. To get detailed information about collisions that "
-"occurred, use [method get_slide_collision].\n"
-"When the body touches a moving platform, the platform's velocity is "
-"automatically added to the body motion. If a collision occurs due to the "
-"platform's motion, it will always be first in the slide collisions."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Moves the body while keeping it attached to slopes. Similar to [method "
-"move_and_slide].\n"
-"As long as the [code]snap[/code] vector is in contact with the ground, the "
-"body will remain attached to the surface. This means you must disable snap "
-"in order to jump, for example. You can do this by setting [code]snap[/code] "
-"to [code](0, 0, 0)[/code] or by using [method move_and_slide] instead."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Locks or unlocks the specified [code]axis[/code] depending on the value of "
-"[code]lock[/code]. See also [member move_lock_x], [member move_lock_y] and "
-"[member move_lock_z]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Checks for collisions without moving the body. Virtually sets the node's "
-"position, scale and rotation to that of the given [Transform], then tries to "
-"move the body along the vector [code]rel_vec[/code]. Returns [code]true[/"
-"code] if a collision would stop the body from moving along the whole path.\n"
-"Use [method move_and_collide] instead for detecting collision with touching "
-"bodies."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid "Lock the body's X axis movement."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid "Lock the body's Y axis movement."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid "Lock the body's Z axis movement."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Extra margin used for collision recovery in motion functions (see [method "
-"move_and_collide], [method move_and_slide], [method "
-"move_and_slide_with_snap]).\n"
-"If the body is at least this close to another body, it will consider them to "
-"be colliding and will be pushed away before performing the actual motion.\n"
-"A higher value means it's more flexible for detecting collision, which helps "
-"with consistently detecting walls and floors.\n"
-"A lower value forces the collision algorithm to use more exact detection, so "
-"it can be used in cases that specifically require precision, e.g at very low "
-"scale to avoid visible jittering, or for stability with a stack of kinematic "
-"bodies."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"If [code]true[/code], the body's movement will be synchronized to the "
-"physics frame. This is useful when animating movement via [AnimationPlayer], "
-"for example on moving platforms. Do [b]not[/b] use together with [method "
-"move_and_slide] or [method move_and_collide] functions."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Lock the body's X axis movement. Deprecated alias for [member "
-"axis_lock_motion_x]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Lock the body's Y axis movement. Deprecated alias for [member "
-"axis_lock_motion_y]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml
-msgid ""
-"Lock the body's Z axis movement. Deprecated alias for [member "
-"axis_lock_motion_z]."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Sets the behavior to apply when you leave a moving platform. By default, to "
-"be physically accurate, when you leave the last platform velocity is "
-"applied. See [enum MovingPlatformApplyVelocityOnLeave] constants for "
-"available behavior."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid "Add the last platform velocity when you leave a moving platform."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid ""
-"Add the last platform velocity when you leave a moving platform, but any "
-"downward motion is ignored. It's useful to keep full jump height even when "
-"the platform is moving down."
-msgstr ""
-
-#: doc/classes/KinematicBody.xml doc/classes/KinematicBody2D.xml
-msgid "Do nothing when leaving a platform."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid "Kinematic body 2D node."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Kinematic bodies are special types of bodies that are meant to be user-"
-"controlled. They are not affected by physics at all; to other types of "
-"bodies, such as a character or a rigid body, these are the same as a static "
-"body. However, they have two main uses:\n"
-"[b]Simulated motion:[/b] When these bodies are moved manually, either from "
-"code or from an [AnimationPlayer] (with [member AnimationPlayer."
-"playback_process_mode] set to \"physics\"), the physics will automatically "
-"compute an estimate of their linear and angular velocity. This makes them "
-"very useful for moving platforms or other AnimationPlayer-controlled objects "
-"(like a door, a bridge that opens, etc).\n"
-"[b]Kinematic characters:[/b] KinematicBody2D also has an API for moving "
-"objects (the [method move_and_collide] and [method move_and_slide] methods) "
-"while performing collision tests. This makes them really useful to implement "
-"characters that collide against a world, but don't require advanced physics."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid "Using KinematicBody2D"
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns the floor's collision angle at the last collision point according to "
-"[code]up_direction[/code], which is [code]Vector2.UP[/code] by default. This "
-"value is always positive and only valid after calling [method "
-"move_and_slide] and when [method is_on_floor] returns [code]true[/code]."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns a [KinematicCollision2D], which contains information about the "
-"latest collision that occurred during the last call to [method "
-"move_and_slide]."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Returns a [KinematicCollision2D], which contains information about a "
-"collision that occurred during the last call to [method move_and_slide] or "
-"[method move_and_slide_with_snap]. Since the body can collide several times "
-"in a single call to [method move_and_slide], you must specify the index of "
-"the collision in the range 0 to ([method get_slide_count] - 1).\n"
-"[b]Example usage:[/b]\n"
-"[codeblock]\n"
-"for i in get_slide_count():\n"
-"    var collision = get_slide_collision(i)\n"
-"    print(\"Collided with: \", collision.collider.name)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Moves the body along the vector [code]rel_vec[/code]. The body will stop if "
-"it collides. Returns a [KinematicCollision2D], which contains information "
-"about the collision when stopped, or when touching another body along the "
-"motion.\n"
-"If [code]test_only[/code] is [code]true[/code], the body does not move but "
-"the would-be collision information is given."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Moves the body along a vector. If the body collides with another, it will "
-"slide along the other body rather than stop immediately. If the other body "
-"is a [KinematicBody2D] or [RigidBody2D], it will also be affected by the "
-"motion of the other body. You can use this to make moving and rotating "
-"platforms, or to make nodes push other nodes.\n"
-"This method should be used in [method Node._physics_process] (or in a method "
-"called by [method Node._physics_process]), as it uses the physics step's "
-"[code]delta[/code] value automatically in calculations. Otherwise, the "
-"simulation will run at an incorrect speed.\n"
-"[code]linear_velocity[/code] is the velocity vector in pixels per second. "
-"Unlike in [method move_and_collide], you should [i]not[/i] multiply it by "
-"[code]delta[/code] — the physics engine handles applying the velocity.\n"
-"[code]up_direction[/code] is the up direction, used to determine what is a "
-"wall and what is a floor or a ceiling. If set to the default value of "
-"[code]Vector2(0, 0)[/code], everything is considered a wall. This is useful "
-"for topdown games.\n"
-"If [code]stop_on_slope[/code] is [code]true[/code], body will not slide on "
-"slopes when you include gravity in [code]linear_velocity[/code] and the body "
-"is standing still.\n"
-"If the body collides, it will change direction a maximum of "
-"[code]max_slides[/code] times before it stops.\n"
-"[code]floor_max_angle[/code] is the maximum angle (in radians) where a slope "
-"is still considered a floor (or a ceiling), rather than a wall. The default "
-"value equals 45 degrees.\n"
-"If [code]infinite_inertia[/code] is [code]true[/code], body will be able to "
-"push [RigidBody2D] nodes, but it won't also detect any collisions with them. "
-"If [code]false[/code], it will interact with [RigidBody2D] nodes like with "
-"[StaticBody2D].\n"
-"Returns the [code]linear_velocity[/code] vector, rotated and/or scaled if a "
-"slide collision occurred. To get detailed information about collisions that "
-"occurred, use [method get_slide_collision].\n"
-"When the body touches a moving platform, the platform's velocity is "
-"automatically added to the body motion. If a collision occurs due to the "
-"platform's motion, it will always be first in the slide collisions."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Moves the body while keeping it attached to slopes. Similar to [method "
-"move_and_slide].\n"
-"As long as the [code]snap[/code] vector is in contact with the ground, the "
-"body will remain attached to the surface. This means you must disable snap "
-"in order to jump, for example. You can do this by setting [code]snap[/code] "
-"to [code](0, 0)[/code] or by using [method move_and_slide] instead."
-msgstr ""
-
-#: doc/classes/KinematicBody2D.xml
-msgid ""
-"Checks for collisions without moving the body. Virtually sets the node's "
-"position, scale and rotation to that of the given [Transform2D], then tries "
-"to move the body along the vector [code]rel_vec[/code]. Returns [code]true[/"
-"code] if a collision would stop the body from moving along the whole path.\n"
-"Use [method move_and_collide] instead for detecting collision with touching "
-"bodies."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml
-msgid "Collision data for [KinematicBody] collisions."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml
-msgid ""
-"Contains collision data for [KinematicBody] collisions. When a "
-"[KinematicBody] is moved using [method KinematicBody.move_and_collide], it "
-"stops if it detects a collision with another body. If a collision is "
-"detected, a KinematicCollision object is returned.\n"
-"This object contains information about the collision, including the "
-"colliding object, the remaining motion, and the collision position. This "
-"information can be used to calculate a collision response."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml
-msgid ""
-"The collision angle according to [code]up_direction[/code], which is "
-"[code]Vector3.UP[/code] by default. This value is always positive."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The colliding body."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid ""
-"The colliding body's unique instance ID. See [method Object.get_instance_id]."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The colliding body's metadata. See [Object]."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml
-msgid "The colliding body's [RID] used by the [PhysicsServer]."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The colliding body's shape."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml
-msgid "The colliding shape's index. See [CollisionObject]."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The colliding object's velocity."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The moving object's colliding shape."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The colliding body's shape's normal at the point of collision."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The point of collision, in global coordinates."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The moving object's remaining movement vector."
-msgstr ""
-
-#: doc/classes/KinematicCollision.xml doc/classes/KinematicCollision2D.xml
-msgid "The distance the moving object traveled before collision."
-msgstr ""
-
-#: doc/classes/KinematicCollision2D.xml
-msgid "Collision data for [KinematicBody2D] collisions."
-msgstr ""
-
-#: doc/classes/KinematicCollision2D.xml
-msgid ""
-"Contains collision data for [KinematicBody2D] collisions. When a "
-"[KinematicBody2D] is moved using [method KinematicBody2D.move_and_collide], "
-"it stops if it detects a collision with another body. If a collision is "
-"detected, a KinematicCollision2D object is returned.\n"
-"This object contains information about the collision, including the "
-"colliding object, the remaining motion, and the collision position. This "
-"information can be used to calculate a collision response."
-msgstr ""
-
-#: doc/classes/KinematicCollision2D.xml
-msgid ""
-"The collision angle according to [code]up_direction[/code], which is "
-"[code]Vector2.UP[/code] by default. This value is always positive."
-msgstr ""
-
-#: doc/classes/KinematicCollision2D.xml
-msgid "The colliding body's [RID] used by the [Physics2DServer]."
-msgstr ""
-
-#: doc/classes/KinematicCollision2D.xml
-msgid "The colliding shape's index. See [CollisionObject2D]."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid ""
-"Displays plain text in a line or wrapped inside a rectangle. For formatted "
-"text, use [RichTextLabel]."
-msgstr ""
-"Zeigt einfachen Text in einer Zeile oder in einem Rechteck an. Verwenden Sie "
-"für formatierten Text [RichTextLabel]."
-
-#: doc/classes/Label.xml
-msgid ""
-"Label displays plain text on the screen. It gives you control over the "
-"horizontal and vertical alignment and can wrap the text inside the node's "
-"bounding rectangle. It doesn't support bold, italics, or other formatting. "
-"For that, use [RichTextLabel] instead.\n"
-"[b]Note:[/b] Contrarily to most other [Control]s, Label's [member Control."
-"mouse_filter] defaults to [constant Control.MOUSE_FILTER_IGNORE] (i.e. it "
-"doesn't react to mouse input events). This implies that a label won't "
-"display any configured [member Control.hint_tooltip], unless you change its "
-"mouse filter.\n"
-"[b]Note:[/b] Unicode characters after [code]0xffff[/code] (such as most "
-"emoji) are [i]not[/i] supported on Windows. They will display as unknown "
-"characters instead. This will be resolved in Godot 4.0."
-msgstr ""
-"Label zeigt einfachen Text auf dem Bildschirm an. Sie können die horizontale "
-"und vertikale Ausrichtung steuern und den Text innerhalb des "
-"Begrenzungsrahmens des Nodes umbrechen. Fett, kursiv oder andere "
-"Formatierungen werden nicht unterstützt. Verwenden Sie stattdessen "
-"[RichTextLabel] für diesen Zweck.\n"
-"[b]Hinweis:[/b] Im Gegensatz zu den meisten anderen [Steuerelementen] ist "
-"Labels [member Control.mouse_filter] standardmäßig auf [constant Control."
-"MOUSE_FILTER_IGNORE] eingestellt (d.h. es reagiert nicht auf Mauseingaben). "
-"Das bedeutet, dass ein Label keinen konfigurierten [member Control."
-"hint_tooltip] anzeigt, solange Sie seinen Mausfilter nicht ändern.\n"
-"[b]Hinweis:[/b] Unicode-Zeichen nach [code]0xffff[/code] (wie die meisten "
-"Emoji) werden [i]nicht[/i] von Windows unterstützt. Sie werden stattdessen "
-"als unbekannte Zeichen angezeigt. Dies wird in Godot 4.0 behoben."
-
-#: doc/classes/Label.xml
-msgid "Returns the amount of lines of text the Label has."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "Returns the font size in pixels."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid ""
-"Returns the total number of printable characters in the text (excluding "
-"spaces and newlines)."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid ""
-"Returns the number of lines shown. Useful if the [Label]'s height cannot "
-"currently display all lines."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid ""
-"Controls the text's horizontal align. Supports left, center, right, and "
-"fill, or justify. Set it to one of the [enum Align] constants."
-msgstr ""
-"Steuert die horizontale Ausrichtung des Textes. Unterstützt links, "
-"zentriert, rechts und füllen oder ausrichten. Setzen Sie ihn auf eine der "
-"[enum Align] Konstanten."
-
-#: doc/classes/Label.xml
-msgid ""
-"If [code]true[/code], wraps the text inside the node's bounding rectangle. "
-"If you resize the node, it will change its height automatically to show all "
-"the text."
-msgstr ""
-"Wenn [code]An[/code], wird der Text innerhalb des Begrenzungsrechtecks des "
-"Nodes angepasst (Es wird automatisch eine neue Zeile angefangen, wenn der "
-"Text nicht in eine Zeile passt). Sollte der Text nicht in das "
-"Begrenzungsrechtecks des Nodes passen, wird das Begrenzungsrechteck "
-"automatisch in der Höhe angepasst."
-
-#: doc/classes/Label.xml
-msgid ""
-"If [code]true[/code], the Label only shows the text that fits inside its "
-"bounding rectangle and will clip text horizontally."
-msgstr ""
-"Wenn [code]An[/code], zeigt das Label nur den Text, der in sein "
-"Begrenzungsrechteck passt an und schneidet den restlichen Text ab."
-
-#: doc/classes/Label.xml
-msgid ""
-"The node ignores the first [code]lines_skipped[/code] lines before it starts "
-"to display text."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "Limits the lines of text the node shows on screen."
-msgstr "Begrenzt die Textzeilen, die das Node auf dem Bildschirm anzeigt."
-
-#: doc/classes/Label.xml
-msgid ""
-"Limits the amount of visible characters. If you set [code]percent_visible[/"
-"code] to 0.5, only up to half of the text's characters will display on "
-"screen. Useful to animate the text in a dialog box."
-msgstr ""
-"Begrenzt die Anzahl der sichtbaren Zeichen. Wenn Sie [code]percent_visible[/"
-"code] auf 0,5 setzen, wird nur der halbe Text auf dem Bildschirm angezeigt. "
-"Nützlich, um den Text in einem Dialogfeld zu animieren."
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml
-msgid "The text to display on screen."
-msgstr "Der Text, der auf dem Bildschirm angezeigt werden soll."
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml doc/classes/TextMesh.xml
-msgid "If [code]true[/code], all the text displays as UPPERCASE."
-msgstr ""
-"Wenn [code]An[/code] , wird der gesamte Text in GROSSBUCHSTABEN angezeigt."
-
-#: doc/classes/Label.xml
-msgid ""
-"Controls the text's vertical align. Supports top, center, bottom, and fill. "
-"Set it to one of the [enum VAlign] constants."
-msgstr ""
-"Steuert die vertikale Ausrichtung des Textes. Unterstützt oben, mitte, unten "
-"und füllen. Setzen Sie ihn auf eine der [enum VAlign] Konstanten."
-
-#: doc/classes/Label.xml
-msgid "Restricts the number of characters to display. Set to -1 to disable."
-msgstr ""
-"Begrenzt die Anzahl der anzuzeigenden Zeichen. Zum Deaktivieren auf -1 "
-"setzen."
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml doc/classes/TextMesh.xml
-msgid "Align rows to the left (default)."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml doc/classes/TextMesh.xml
-msgid "Align rows centered."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml doc/classes/TextMesh.xml
-msgid "Align rows to the right."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml
-msgid "Expand row whitespaces to fit the width."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml
-msgid "Align the whole text to the top."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml
-msgid "Align the whole text to the center."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml
-msgid "Align the whole text to the bottom."
-msgstr ""
-
-#: doc/classes/Label.xml doc/classes/Label3D.xml
-msgid "Align the whole text by spreading the rows."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "Default text [Color] of the [Label]."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "[Color] of the text's shadow effect."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "The tint of [Font]'s outline. See [member DynamicFont.outline_color]."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "Vertical space between lines in multiline [Label]."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid ""
-"Boolean value. If set to 1 ([code]true[/code]), the shadow will be displayed "
-"around the whole text as an outline."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "The horizontal offset of the text's shadow."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "The vertical offset of the text's shadow."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "[Font] used for the [Label]'s text."
-msgstr ""
-
-#: doc/classes/Label.xml
-msgid "Background [StyleBox] for the [Label]."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid "Displays plain text in a 3D world."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Label3D displays plain text in a 3D world. It gives you control over the "
-"horizontal and vertical alignment."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Returns a [TriangleMesh] with the label's vertices following its current "
-"configuration (such as its [member pixel_size])."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the specified flag will be enabled. See [enum Label3D."
-"DrawFlags] for a list of flags."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die spezifizerte Flagge aktiviert ist. "
-"Siehe die [enum Flags] Aufzählung für Optionen."
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid ""
-"The alpha cutting mode to use for the sprite. See [enum AlphaCutMode] for "
-"possible values."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: doc/classes/Label3D.xml doc/classes/SpatialMaterial.xml
-msgid "Threshold at which the alpha scissor will discard values."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid "If [code]true[/code], wraps the text to the [member width]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid ""
-"The billboard mode to use for the label. See [enum SpatialMaterial."
-"BillboardMode] for possible values."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: doc/classes/Label3D.xml
-msgid ""
-"If [code]true[/code], text can be seen from the back as well, if "
-"[code]false[/code], it is invisible when looking at it from behind."
-msgstr ""
-
-#: doc/classes/Label3D.xml doc/classes/SpriteBase3D.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the label is rendered at the same size regardless of "
-"distance."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid "[Font] used for the [Label3D]'s text."
-msgstr "Kein Hinweis auf die bearbeitete Eigenschaft."
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Controls the text's horizontal alignment. Supports left, center, right. Set "
-"it to one of the [enum Align] constants."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid "Vertical space between lines in multiline [Label3D]."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid "Text [Color] of the [Label3D]."
-msgstr ""
-
-#: doc/classes/Label3D.xml doc/classes/SpatialMaterial.xml
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"If [code]true[/code], depth testing is disabled and the object will be drawn "
-"in render order."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid "The text drawing offset (in pixels)."
-msgstr "Der Zeichen-Offset der Textur."
-
-#: doc/classes/Label3D.xml
-msgid "The tint of [Font]'s outline."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Sets the render priority for the text outline. Higher priority objects will "
-"be sorted in front of lower priority objects.\n"
-"[b]Note:[/b] This only applies if [member alpha_cut] is set to [constant "
-"ALPHA_CUT_DISABLED] (default value).\n"
-"[b]Note:[/b] This only applies to sorting of transparent objects. This will "
-"not impact how transparent objects are sorted relative to opaque objects. "
-"This is because opaque objects are not sorted, while transparent objects are "
-"sorted from back to front (subject to priority)."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid "The size of one pixel's width on the label to scale it in 3D."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Sets the render priority for the text. Higher priority objects will be "
-"sorted in front of lower priority objects.\n"
-"[b]Note:[/b] This only applies if [member alpha_cut] is set to [constant "
-"ALPHA_CUT_DISABLED] (default value).\n"
-"[b]Note:[/b] This only applies to sorting of transparent objects. This will "
-"not impact how transparent objects are sorted relative to opaque objects. "
-"This is because opaque objects are not sorted, while transparent objects are "
-"sorted from back to front (subject to priority)."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the [Light] in the [Environment] has effects on the "
-"label."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Controls the text's vertical alignment. Supports top, center, bottom. Set it "
-"to one of the [enum VAlign] constants."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid "Text width (in pixels), used for autowrap and fill alignment."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-#, fuzzy
-msgid "If set, lights in the environment affect the label."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/Label3D.xml
-msgid ""
-"If set, text can be seen from the back as well. If not, the text is "
-"invisible when looking at it from behind."
-msgstr ""
-
-#: doc/classes/Label3D.xml doc/classes/SpatialMaterial.xml
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"Disables the depth test, so this object is drawn on top of all others. "
-"However, objects drawn after it in the draw order may cover it."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"Label is scaled by depth so that it always appears the same size on screen."
-msgstr ""
-
-#: doc/classes/Label3D.xml doc/classes/SpriteBase3D.xml
-msgid "Represents the size of the [enum DrawFlags] enum."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"This mode performs standard alpha blending. It can display translucent "
-"areas, but transparency sorting issues may be visible when multiple "
-"transparent materials are overlapping."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"This mode only allows fully transparent or fully opaque pixels. This mode is "
-"also known as [i]alpha testing[/i] or [i]1-bit transparency[/i].\n"
-"[b]Note:[/b] This mode might have issues with anti-aliased fonts and "
-"outlines, try adjusting [member alpha_scissor_threshold] or using SDF font.\n"
-"[b]Note:[/b] When using text with overlapping glyphs (e.g., cursive "
-"scripts), this mode might have transparency sorting issues between the main "
-"text and the outline."
-msgstr ""
-
-#: doc/classes/Label3D.xml
-msgid ""
-"This mode draws fully opaque pixels in the depth prepass. This is slower "
-"than [constant ALPHA_CUT_DISABLED] or [constant ALPHA_CUT_DISCARD], but it "
-"allows displaying translucent areas and smooth edges while using proper "
-"sorting.\n"
-"[b]Note:[/b] When using text with overlapping glyphs (e.g., cursive "
-"scripts), this mode might have transparency sorting issues between the main "
-"text and the outline."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-msgid ""
-"[i]Deprecated.[/i] A [Texture] capable of storing many smaller textures with "
-"offsets."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-msgid ""
-"[i]Deprecated (will be removed in Godot 4.0).[/i] A [Texture] capable of "
-"storing many smaller textures with offsets.\n"
-"You can dynamically add pieces ([Texture]s) to this [LargeTexture] using "
-"different offsets."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-msgid ""
-"Adds [code]texture[/code] to this [LargeTexture], starting on offset "
-"[code]ofs[/code]."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-msgid "Clears the [LargeTexture]."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-msgid "Returns the number of pieces currently in this [LargeTexture]."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-msgid "Returns the offset of the piece with the index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-#, fuzzy
-msgid "Returns the [Texture] of the piece with the index [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/LargeTexture.xml
-msgid ""
-"Sets the offset of the piece with the index [code]idx[/code] to [code]ofs[/"
-"code]."
-msgstr ""
-
-#: doc/classes/LargeTexture.xml
-#, fuzzy
-msgid ""
-"Sets the [Texture] of the piece with index [code]idx[/code] to "
-"[code]texture[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/LargeTexture.xml
-msgid "Sets the size of this [LargeTexture]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Provides a base class for different kinds of light nodes."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Light is the [i]abstract[/i] base class for light nodes. As it can't be "
-"instanced, it shouldn't be used directly. Other types of light nodes inherit "
-"from it. Light contains the common variables and parameters used for "
-"lighting."
-msgstr ""
-
-#: doc/classes/Light.xml doc/classes/SpotLight.xml
-msgid "3D lights and shadows"
-msgstr ""
-
-#: doc/classes/Light.xml
-#, fuzzy
-msgid "Returns the value of the specified [enum Light.Param] parameter."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/Light.xml
-msgid "Sets the value of the specified [enum Light.Param] parameter."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"If [code]true[/code], the light only appears in the editor and will not be "
-"visible at runtime."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "The light's bake mode. See [enum BakeMode]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"The light's color. An [i]overbright[/i] color can be used to achieve a "
-"result equivalent to increasing the light's [member light_energy]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "The light will affect objects in the selected layers."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"The light's strength multiplier (this is not a physical unit). For "
-"[OmniLight] and [SpotLight], changing this value will only change the light "
-"color's intensity, not the light's radius."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Secondary multiplier used with indirect light (light bounces). This works on "
-"both [BakedLightmap] and [GIProbe]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"If [code]true[/code], the light's effect is reversed, darkening areas and "
-"casting bright shadows."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"The size of the light in Godot units. Only considered in baked lightmaps and "
-"only if [member light_bake_mode] is set to [constant BAKE_ALL]. Increasing "
-"this value will make the shadows appear blurrier. This can be used to "
-"simulate area lights to an extent.\n"
-"[b]Note:[/b] [member light_size] is not affected by [member Spatial.scale] "
-"(the light's scale or its parent's scale)."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"The intensity of the specular blob in objects affected by the light. At "
-"[code]0[/code], the light becomes a pure diffuse light. When not baking "
-"emission, this can be used to avoid unrealistic reflections when placing "
-"lights above an emissive surface."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Used to adjust shadow appearance. Too small a value results in self-"
-"shadowing (\"shadow acne\"), while too large a value causes shadows to "
-"separate from casters (\"peter-panning\"). Adjust as needed."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "The color of shadows cast by this light."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Attempts to reduce [member shadow_bias] gap by rendering screen-space "
-"contact shadows. This has a performance impact, especially at higher "
-"values.\n"
-"[b]Note:[/b] Contact shadows can look broken, so leaving this property to "
-"[code]0.0[/code] is recommended."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "If [code]true[/code], the light will cast shadows."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"If [code]true[/code], reverses the backface culling of the mesh. This can be "
-"useful when you have a flat mesh that has a light behind it. If you need to "
-"cast a shadow on both sides of the mesh, set the mesh to use double-sided "
-"shadows with [constant GeometryInstance.SHADOW_CASTING_SETTING_DOUBLE_SIDED]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member light_energy]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member light_indirect_energy]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member light_size]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member light_specular]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member OmniLight.omni_range] or [member SpotLight."
-"spot_range]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member OmniLight.omni_attenuation] or [member "
-"SpotLight.spot_attenuation]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member SpotLight.spot_angle]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member SpotLight.spot_angle_attenuation]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member shadow_contact]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member DirectionalLight."
-"directional_shadow_max_distance]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member DirectionalLight.directional_shadow_split_1]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member DirectionalLight.directional_shadow_split_2]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member DirectionalLight.directional_shadow_split_3]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member DirectionalLight."
-"directional_shadow_normal_bias]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Constant for accessing [member shadow_bias]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Constant for accessing [member DirectionalLight."
-"directional_shadow_bias_split_scale]."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Light is ignored when baking.\n"
-"[b]Note:[/b] Hiding a light does [i]not[/i] affect baking."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid "Only indirect lighting will be baked (default)."
-msgstr ""
-
-#: doc/classes/Light.xml
-msgid ""
-"Both direct and indirect light will be baked.\n"
-"[b]Note:[/b] You should hide the light if you don't want it to appear twice "
-"(dynamic and baked)."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Casts light in a 2D environment."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Casts light in a 2D environment. Light is defined by a (usually grayscale) "
-"texture, a color, an energy value, a mode (see constants), and various other "
-"parameters (range and shadows-related).\n"
-"[b]Note:[/b] Light2D can also be used as a mask."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "The Light2D's [Color]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "If [code]true[/code], Light2D will only appear when editing the scene."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "If [code]true[/code], Light2D will emit light."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"The Light2D's energy value. The larger the value, the stronger the light."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "The Light2D's mode. See [enum Mode] constants for values."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "The offset of the Light2D's [code]texture[/code]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "The height of the Light2D. Used with 2D normal mapping."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"The layer mask. Only objects with a matching mask will be affected by the "
-"Light2D."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Maximum layer value of objects that are affected by the Light2D."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Minimum layer value of objects that are affected by the Light2D."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Maximum [code]z[/code] value of objects that are affected by the Light2D."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Minimum [code]z[/code] value of objects that are affected by the Light2D."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Shadow buffer size."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "[Color] of shadows cast by the Light2D."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "If [code]true[/code], the Light2D will cast shadows."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Shadow filter type. See [enum ShadowFilter] for possible values."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Smoothing value for shadows."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "Smooth shadow gradient length."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"The shadow mask. Used with [LightOccluder2D] to cast shadows. Only occluders "
-"with a matching light mask will cast shadows."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "[Texture] used for the Light2D's appearance."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "The [code]texture[/code]'s scale factor."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Adds the value of pixels corresponding to the Light2D to the values of "
-"pixels under it. This is the common behavior of a light."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Subtracts the value of pixels corresponding to the Light2D to the values of "
-"pixels under it, resulting in inversed light effect."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Mix the value of pixels corresponding to the Light2D to the values of pixels "
-"under it by linear interpolation."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"The light texture of the Light2D is used as a mask, hiding or revealing "
-"parts of the screen underneath depending on the value of each pixel of the "
-"light (mask) texture."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid "No filter applies to the shadow map. See [member shadow_filter]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Percentage closer filtering (3 samples) applies to the shadow map. See "
-"[member shadow_filter]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Percentage closer filtering (5 samples) applies to the shadow map. See "
-"[member shadow_filter]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Percentage closer filtering (7 samples) applies to the shadow map. See "
-"[member shadow_filter]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Percentage closer filtering (9 samples) applies to the shadow map. See "
-"[member shadow_filter]."
-msgstr ""
-
-#: doc/classes/Light2D.xml
-msgid ""
-"Percentage closer filtering (13 samples) applies to the shadow map. See "
-"[member shadow_filter]."
-msgstr ""
-
-#: doc/classes/LightOccluder2D.xml
-msgid "Occludes light cast by a Light2D, casting shadows."
-msgstr ""
-
-#: doc/classes/LightOccluder2D.xml
-msgid ""
-"Occludes light cast by a Light2D, casting shadows. The LightOccluder2D must "
-"be provided with an [OccluderPolygon2D] in order for the shadow to be "
-"computed."
-msgstr ""
-
-#: doc/classes/LightOccluder2D.xml
-msgid ""
-"The LightOccluder2D's light mask. The LightOccluder2D will cast shadows only "
-"from Light2D(s) that have the same light mask(s)."
-msgstr ""
-
-#: doc/classes/LightOccluder2D.xml
-msgid "The [OccluderPolygon2D] used to compute the shadow."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "A 2D line."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"A line through several points in 2D space. Supports varying width and color "
-"over the line's length, texturing, and several cap/joint types.\n"
-"[b]Note:[/b] By default, Godot can only draw up to 4,096 polygon points at a "
-"time. To increase this limit, open the Project Settings and increase [member "
-"ProjectSettings.rendering/limits/buffers/canvas_polygon_buffer_size_kb] and "
-"[member ProjectSettings.rendering/limits/buffers/"
-"canvas_polygon_index_buffer_size_kb]."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"Adds a point with the specified [code]position[/code] relative to the line's "
-"own position. Appends the new point at the end of the point list.\n"
-"If [code]index[/code] is given, the new point is inserted before the "
-"existing point identified by index [code]index[/code]. Every existing point "
-"starting from [code]index[/code] is shifted further down the list of points. "
-"The index must be greater than or equal to [code]0[/code] and must not "
-"exceed the number of existing points in the line. See [method "
-"get_point_count]."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "Removes all points from the line."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-#, fuzzy
-msgid "Returns the amount of points in the line."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/Line2D.xml
-#, fuzzy
-msgid "Returns the position of the point at index [code]index[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/Line2D.xml
-#, fuzzy
-msgid "Removes the point at index [code]index[/code] from the line."
-msgstr ""
-"Entfernt den Punkt bei Index [code]Punkt[/code] aus dem Überblendungsbereich."
-
-#: doc/classes/Line2D.xml
-#, fuzzy
-msgid ""
-"Overwrites the position of the point at index [code]index[/code] with the "
-"supplied [code]position[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/Line2D.xml
-msgid ""
-"If [code]true[/code], the line's border will attempt to perform antialiasing "
-"by drawing thin OpenGL smooth lines on the line's edges.\n"
-"[b]Note:[/b] Line2D is not accelerated by batching if [member antialiased] "
-"is [code]true[/code].\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent lines and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedLine2D node. That node relies on a texture with custom mipmaps to "
-"perform antialiasing. 2D batching is also still supported with those "
-"antialiased lines."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"Controls the style of the line's first point. Use [enum LineCapMode] "
-"constants."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "The line's color. Will not be used if a gradient is set."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"Controls the style of the line's last point. Use [enum LineCapMode] "
-"constants."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The gradient is drawn through the whole line from start to finish. The "
-"default color will not be used if a gradient is set."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "The style for the points between the start and the end."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The points that form the lines. The line is drawn between every point set in "
-"this array. Points are interpreted as local vectors."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The smoothness of the rounded joints and caps. Higher values result in "
-"smoother corners, but are more demanding to render and update. This is only "
-"used if a cap or joint is set as round.\n"
-"[b]Note:[/b] The default value is tuned for lines with the default [member "
-"width]. For thin lines, this value should be reduced to a number between "
-"[code]2[/code] and [code]4[/code] to improve performance."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The direction difference in radians between vector points. This value is "
-"only used if [member joint_mode] is set to [constant LINE_JOINT_SHARP]."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The texture used for the line's texture. Uses [code]texture_mode[/code] for "
-"drawing style."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The style to render the [code]texture[/code] on the line. Use [enum "
-"LineTextureMode] constants."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "The line's width."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The line's width varies with the curve. The original width is simply "
-"multiply by the value of the Curve."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"The line's joints will be pointy. If [code]sharp_limit[/code] is greater "
-"than the rotation of a joint, it becomes a bevel joint instead."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "The line's joints will be bevelled/chamfered."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "The line's joints will be rounded."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "Don't draw a line cap."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "Draws the line cap as a box."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid "Draws the line cap as a circle."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"Takes the left pixels of the texture and renders it over the whole line."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"Tiles the texture over the line. The texture must be imported with "
-"[b]Repeat[/b] enabled for it to work properly."
-msgstr ""
-
-#: doc/classes/Line2D.xml
-msgid ""
-"Stretches the texture across the line. Import the texture with [b]Repeat[/b] "
-"disabled for best results."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Control that provides single-line string editing."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"LineEdit provides a single-line string editor, used for text fields.\n"
-"It features many built-in shortcuts which will always be available "
-"([code]Ctrl[/code] here maps to [code]Command[/code] on macOS):\n"
-"- Ctrl + C: Copy\n"
-"- Ctrl + X: Cut\n"
-"- Ctrl + V or Ctrl + Y: Paste/\"yank\"\n"
-"- Ctrl + Z: Undo\n"
-"- Ctrl + Shift + Z: Redo\n"
-"- Ctrl + U: Delete text from the cursor position to the beginning of the "
-"line\n"
-"- Ctrl + K: Delete text from the cursor position to the end of the line\n"
-"- Ctrl + A: Select all text\n"
-"- Up/Down arrow: Move the cursor to the beginning/end of the line\n"
-"On macOS, some extra keyboard shortcuts are available:\n"
-"- Ctrl + F: Like the right arrow key, move the cursor one character right\n"
-"- Ctrl + B: Like the left arrow key, move the cursor one character left\n"
-"- Ctrl + P: Like the up arrow key, move the cursor to the previous line\n"
-"- Ctrl + N: Like the down arrow key, move the cursor to the next line\n"
-"- Ctrl + D: Like the Delete key, delete the character on the right side of "
-"cursor\n"
-"- Ctrl + H: Like the Backspace key, delete the character on the left side of "
-"the cursor\n"
-"- Command + Left arrow: Like the Home key, move the cursor to the beginning "
-"of the line\n"
-"- Command + Right arrow: Like the End key, move the cursor to the end of the "
-"line"
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Adds [code]text[/code] after the cursor. If the resulting value is longer "
-"than [member max_length], nothing happens."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Erases the [LineEdit]'s [member text]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Deletes one character at the cursor's current position (equivalent to "
-"pressing the [code]Delete[/code] key)."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Deletes a section of the [member text] going from position "
-"[code]from_column[/code] to [code]to_column[/code]. Both parameters should "
-"be within the text's length."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/RichTextLabel.xml
-msgid "Clears the current selection."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Returns the [PopupMenu] of this [LineEdit]. By default, this menu is "
-"displayed when right-clicking on the [LineEdit].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Returns the scroll offset due to [member caret_position], as a number of "
-"characters."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Returns the selection begin column."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Returns the selection end column."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if the user has selected text."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/LineEdit.xml
-msgid "Executes a given action as defined in the [enum MenuItems] enum."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Selects characters inside [LineEdit] between [code]from[/code] and [code]to[/"
-"code]. By default, [code]from[/code] is at the beginning and [code]to[/code] "
-"at the end.\n"
-"[codeblock]\n"
-"text = \"Welcome\"\n"
-"select() # Will select \"Welcome\".\n"
-"select(4) # Will select \"ome\".\n"
-"select(2, 5) # Will select \"lco\".\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Selects the whole [String]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Text alignment as defined in the [enum Align] enum."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "If [code]true[/code], the caret (visual cursor) blinks."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Duration (in seconds) of a caret's blinking cycle."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"The cursor's position inside the [LineEdit]. When set, the text may scroll "
-"to accommodate it."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"If [code]true[/code], the [LineEdit] will show a clear button if [code]text[/"
-"code] is not empty, which can be used to clear the text quickly."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "If [code]true[/code], the context menu will appear when right-clicked."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/RichTextLabel.xml
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the selected text will be deselected when focus is "
-"lost."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"If [code]false[/code], existing text cannot be modified and new text cannot "
-"be added."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"If [code]true[/code], the [LineEdit] width will increase to stay longer than "
-"the [member text]. It will [b]not[/b] compress if the [member text] is "
-"shortened."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Maximum amount of characters that can be entered inside the [LineEdit]. If "
-"[code]0[/code], there is no limit.\n"
-"When a limit is defined, characters that would exceed [member max_length] "
-"are truncated. This happens both for existing [member text] contents when "
-"setting the max length, or for new text inserted in the [LineEdit], "
-"including pasting. If any input text is truncated, the [signal "
-"text_change_rejected] signal is emitted with the truncated substring as "
-"parameter.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"text = \"Hello world\"\n"
-"max_length = 5\n"
-"# `text` becomes \"Hello\".\n"
-"max_length = 10\n"
-"text += \" goodbye\"\n"
-"# `text` becomes \"Hello good\".\n"
-"# `text_change_rejected` is emitted with \"bye\" as parameter.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid ""
-"If [code]false[/code], using middle mouse button to paste clipboard will be "
-"disabled.\n"
-"[b]Note:[/b] This method is only implemented on Linux."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Opacity of the [member placeholder_text]. From [code]0[/code] to [code]1[/"
-"code]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Text shown when the [LineEdit] is empty. It is [b]not[/b] the [LineEdit]'s "
-"default value (see [member text])."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Sets the icon that will appear in the right end of the [LineEdit] if there's "
-"no [member text], or always, if [member clear_button_enabled] is set to "
-"[code]false[/code]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"If [code]true[/code], every character is replaced with the secret character "
-"(see [member secret_character])."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"The character to use to mask secret input (defaults to \"*\"). Only a single "
-"character can be used as the secret character."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"If [code]false[/code], it's impossible to select the text using mouse nor "
-"keyboard."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "If [code]false[/code], using shortcuts will be disabled."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"String value of the [LineEdit].\n"
-"[b]Note:[/b] Changing text using this property won't emit the [signal "
-"text_changed] signal."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], the native virtual keyboard is shown when focused on "
-"platforms that support it."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Emitted when appending text that overflows the [member max_length]. The "
-"appended text is truncated to fit [member max_length], and the part that "
-"couldn't fit is passed as the [code]rejected_substring[/code] argument."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Emitted when the text changes."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Emitted when the user presses [constant KEY_ENTER] on the [LineEdit]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Aligns the text on the left-hand side of the [LineEdit]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Centers the text in the middle of the [LineEdit]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Aligns the text on the right-hand side of the [LineEdit]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Stretches whitespaces to fit the [LineEdit]'s width."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Cuts (copies and clears) the selected text."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Copies the selected text."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Pastes the clipboard text over the selected text (or at the cursor's "
-"position).\n"
-"Non-printable escape characters are automatically stripped from the OS "
-"clipboard via [method String.strip_escapes]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Erases the whole [LineEdit] text."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Selects the whole [LineEdit] text."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Undoes the previous action."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Reverse the last undo action."
-msgstr ""
-
-#: doc/classes/LineEdit.xml doc/classes/TextEdit.xml
-msgid "Represents the size of the [enum MenuItems] enum."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Color used as default tint for the clear button."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Color used for the clear button when it's pressed."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Color of the [LineEdit]'s visual cursor (caret)."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Default font color."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Font color for selected text (inside the selection rectangle)."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Font color when editing is disabled."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Color of the selection rectangle."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Minimum horizontal space for the text (not counting the clear button and "
-"content margins). This value is measured in count of space characters (i.e. "
-"this amount of space characters can be displayed without scrolling)."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Font used for the text."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Texture for the clear button. See [member clear_button_enabled]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Background used when [LineEdit] has GUI focus."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid "Default background for the [LineEdit]."
-msgstr ""
-
-#: doc/classes/LineEdit.xml
-msgid ""
-"Background used when [LineEdit] is in read-only mode ([member editable] is "
-"set to [code]false[/code])."
-msgstr ""
-
-#: doc/classes/LineShape2D.xml
-msgid "Line shape for 2D collisions."
-msgstr ""
-
-#: doc/classes/LineShape2D.xml
-msgid ""
-"Line shape for 2D collisions. It works like a 2D plane and will not allow "
-"any physics body to go to the negative side. Not recommended for rigid "
-"bodies, and usually not recommended for static bodies either because it "
-"forces checks against it on every frame."
-msgstr ""
-
-#: doc/classes/LineShape2D.xml
-msgid "The line's distance from the origin."
-msgstr ""
-
-#: doc/classes/LineShape2D.xml
-msgid "The line's normal."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "Simple button used to represent a link to some resource."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid ""
-"This kind of button is primarily used when the interaction with the button "
-"causes a context change (like linking to a web page).\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid ""
-"Determines when to show the underline. See [enum UnderlineMode] for options."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "The LinkButton will always show an underline at the bottom of its text."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid ""
-"The LinkButton will show an underline at the bottom of its text when the "
-"mouse cursor is over it."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "The LinkButton will never show an underline at the bottom of its text."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "Default text [Color] of the [LinkButton]."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid ""
-"Text [Color] used when the [LinkButton] is focused. Only replaces the normal "
-"text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "Text [Color] used when the [LinkButton] is being hovered."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "Text [Color] used when the [LinkButton] is being pressed."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "The vertical space between the baseline of text and the underline."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid "[Font] of the [LinkButton]'s text."
-msgstr ""
-
-#: doc/classes/LinkButton.xml
-msgid ""
-"[StyleBox] used when the [LinkButton] is focused. It is displayed over the "
-"current [StyleBox], so using [StyleBoxEmpty] will just disable the focus "
-"visual effect."
-msgstr ""
-
-#: doc/classes/Listener.xml doc/classes/Listener2D.xml
-msgid "Overrides the location sounds are heard from."
-msgstr ""
-
-#: doc/classes/Listener.xml
-msgid ""
-"Once added to the scene tree and enabled using [method make_current], this "
-"node will override the location sounds are heard from. This can be used to "
-"listen from a location different from the [Camera]."
-msgstr ""
-
-#: doc/classes/Listener.xml
-msgid "Disables the listener to use the current camera's listener instead."
-msgstr ""
-
-#: doc/classes/Listener.xml
-msgid "Returns the listener's global orthonormalized [Transform]."
-msgstr ""
-
-#: doc/classes/Listener.xml
-msgid ""
-"Returns [code]true[/code] if the listener was made current using [method "
-"make_current], [code]false[/code] otherwise.\n"
-"[b]Note:[/b] There may be more than one Listener marked as \"current\" in "
-"the scene tree, but only the one that was made current last will be used."
-msgstr ""
-
-#: doc/classes/Listener.xml
-msgid "Enables the listener. This will override the current camera's listener."
-msgstr ""
-
-#: doc/classes/Listener2D.xml
-msgid ""
-"Once added to the scene tree and enabled using [method make_current], this "
-"node will override the location sounds are heard from. Only one [Listener2D] "
-"can be current. Using [method make_current] will disable the previous "
-"[Listener2D].\n"
-"If there is no active [Listener2D] in the current [Viewport], center of the "
-"screen will be used as a hearing point for the audio. [Listener2D] needs to "
-"be inside [SceneTree] to function."
-msgstr ""
-
-#: doc/classes/Listener2D.xml
-msgid ""
-"Disables the [Listener2D]. If it's not set as current, this method will have "
-"no effect."
-msgstr ""
-
-#: doc/classes/Listener2D.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if this [Listener2D] is currently active."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn gerade eine Animation abgespielt wird."
-
-#: doc/classes/Listener2D.xml
-msgid ""
-"Makes the [Listener2D] active, setting it as the hearing point for the "
-"sounds. If there is already another active [Listener2D], it will be "
-"disabled.\n"
-"This method will have no effect if the [Listener2D] is not added to "
-"[SceneTree]."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid "Abstract base class for the game's main loop."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"[MainLoop] is the abstract base class for a Godot project's game loop. It is "
-"inherited by [SceneTree], which is the default game loop implementation used "
-"in Godot projects, though it is also possible to write and use one's own "
-"[MainLoop] subclass instead of the scene tree.\n"
-"Upon the application start, a [MainLoop] implementation must be provided to "
-"the OS; otherwise, the application will exit. This happens automatically "
-"(and a [SceneTree] is created) unless a main [Script] is provided from the "
-"command line (with e.g. [code]godot -s my_loop.gd[/code], which should then "
-"be a [MainLoop] implementation.\n"
-"Here is an example script implementing a simple [MainLoop]:\n"
-"[codeblock]\n"
-"extends MainLoop\n"
-"\n"
-"var time_elapsed = 0\n"
-"var keys_typed = []\n"
-"var quit = false\n"
-"\n"
-"func _initialize():\n"
-"    print(\"Initialized:\")\n"
-"    print(\"  Starting time: %s\" % str(time_elapsed))\n"
-"\n"
-"func _idle(delta):\n"
-"    time_elapsed += delta\n"
-"    # Return true to end the main loop.\n"
-"    return quit\n"
-"\n"
-"func _input_event(event):\n"
-"    # Record keys.\n"
-"    if event is InputEventKey and event.pressed and !event.echo:\n"
-"        keys_typed.append(OS.get_scancode_string(event.scancode))\n"
-"        # Quit on Escape press.\n"
-"        if event.scancode == KEY_ESCAPE:\n"
-"            quit = true\n"
-"    # Quit on any mouse click.\n"
-"    if event is InputEventMouseButton:\n"
-"        quit = true\n"
-"\n"
-"func _finalize():\n"
-"    print(\"Finalized:\")\n"
-"    print(\"  End time: %s\" % str(time_elapsed))\n"
-"    print(\"  Keys typed: %s\" % var2str(keys_typed))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Called when files are dragged from the OS file manager and dropped in the "
-"game window. The arguments are a list of file paths and the identifier of "
-"the screen where the drag originated."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid "Called before the program exits."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Called when the user performs an action in the system global menu (e.g. the "
-"Mac OS menu bar)."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Called each idle frame with the time since the last idle frame as argument "
-"(in seconds). Equivalent to [method Node._process].\n"
-"If implemented, the method must return a boolean value. [code]true[/code] "
-"ends the main loop, while [code]false[/code] lets it proceed to the next "
-"frame."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid "Called once during initialization."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid "Called whenever an [InputEvent] is received by the main loop."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Deprecated callback, does not do anything. Use [method _input_event] to "
-"parse text input. Will be removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Called each physics frame with the time since the last physics frame as "
-"argument ([code]delta[/code], in seconds). Equivalent to [method Node."
-"_physics_process].\n"
-"If implemented, the method must return a boolean value. [code]true[/code] "
-"ends the main loop, while [code]false[/code] lets it proceed to the next "
-"frame."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Should not be called manually, override [method _finalize] instead. Will be "
-"removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Should not be called manually, override [method _idle] instead. Will be "
-"removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Should not be called manually, override [method _initialize] instead. Will "
-"be removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Should not be called manually, override [method _input_event] instead. Will "
-"be removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Should not be called manually, override [method _input_text] instead. Will "
-"be removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid ""
-"Should not be called manually, override [method _iteration] instead. Will be "
-"removed in Godot 4.0."
-msgstr ""
-
-#: doc/classes/MainLoop.xml
-msgid "Emitted when a user responds to a permission request."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the mouse enters the game window.\n"
-"Implemented on desktop and web platforms."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the mouse leaves the game window.\n"
-"Implemented on desktop and web platforms."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the game window is focused.\n"
-"Implemented on all platforms."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the game window is unfocused.\n"
-"Implemented on all platforms."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when a quit request is sent (e.g. closing "
-"the window with a \"Close\" button or Alt+F4).\n"
-"Implemented on desktop platforms."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when a go back request is sent (e.g. "
-"pressing the \"Back\" button on Android).\n"
-"Specific to the Android platform."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when an unfocus request is sent (e.g. "
-"another OS window wants to take the focus).\n"
-"No supported platforms currently send this notification."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the application is exceeding its "
-"allocated memory.\n"
-"Specific to the iOS platform."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received when translations may have changed. Can be triggered "
-"by the user changing the locale. Can be used to respond to language changes, "
-"for example to change the UI strings on the fly. Useful when working with "
-"the built-in translation support, like [method Object.tr]."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when a request for \"About\" information "
-"is sent.\n"
-"Specific to the macOS platform."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from Godot's crash handler when the engine is about to "
-"crash.\n"
-"Implemented on desktop platforms if the crash handler is enabled."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when an update of the Input Method Engine "
-"occurs (e.g. change of IME cursor position or composition string).\n"
-"Specific to the macOS platform."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the app is resumed.\n"
-"Specific to the Android platform."
-msgstr ""
-
-#: doc/classes/MainLoop.xml doc/classes/Node.xml
-msgid ""
-"Notification received from the OS when the app is paused.\n"
-"Specific to the Android platform."
-msgstr ""
-
-#: doc/classes/MarginContainer.xml
-msgid "Simple margin container."
-msgstr ""
-
-#: doc/classes/MarginContainer.xml
-msgid ""
-"Adds a top, left, bottom, and right margin to all [Control] nodes that are "
-"direct children of the container. To control the [MarginContainer]'s margin, "
-"use the [code]margin_*[/code] theme properties listed below.\n"
-"[b]Note:[/b] Be careful, [Control] margin values are different than the "
-"constant margin values. If you want to change the custom margin values of "
-"the [MarginContainer] by code, you should use the following examples:\n"
-"[codeblock]\n"
-"# This code sample assumes the current script is extending MarginContainer.\n"
-"var margin_value = 100\n"
-"add_constant_override(\"margin_top\", margin_value)\n"
-"add_constant_override(\"margin_left\", margin_value)\n"
-"add_constant_override(\"margin_bottom\", margin_value)\n"
-"add_constant_override(\"margin_right\", margin_value)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/MarginContainer.xml
-msgid ""
-"All direct children of [MarginContainer] will have a bottom margin of "
-"[code]margin_bottom[/code] pixels."
-msgstr ""
-
-#: doc/classes/MarginContainer.xml
-msgid ""
-"All direct children of [MarginContainer] will have a left margin of "
-"[code]margin_left[/code] pixels."
-msgstr ""
-
-#: doc/classes/MarginContainer.xml
-msgid ""
-"All direct children of [MarginContainer] will have a right margin of "
-"[code]margin_right[/code] pixels."
-msgstr ""
-
-#: doc/classes/MarginContainer.xml
-msgid ""
-"All direct children of [MarginContainer] will have a top margin of "
-"[code]margin_top[/code] pixels."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid "Data transformation (marshalling) and encoding helpers."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid "Provides data transformation and encoding utility functions."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid ""
-"Returns a decoded [PoolByteArray] corresponding to the Base64-encoded string "
-"[code]base64_str[/code]."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid ""
-"Returns a decoded string corresponding to the Base64-encoded string "
-"[code]base64_str[/code]."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid ""
-"Returns a decoded [Variant] corresponding to the Base64-encoded string "
-"[code]base64_str[/code]. If [code]allow_objects[/code] is [code]true[/code], "
-"decoding objects is allowed.\n"
-"[b]Warning:[/b] Deserialized objects can contain code which gets executed. "
-"Do not use this option if the serialized object comes from untrusted sources "
-"to avoid potential security threats such as remote code execution."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid "Returns a Base64-encoded string of a given [PoolByteArray]."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid ""
-"Returns a Base64-encoded string of the UTF-8 string [code]utf8_str[/code]."
-msgstr ""
-
-#: doc/classes/Marshalls.xml
-msgid ""
-"Returns a Base64-encoded string of the [Variant] [code]variant[/code]. If "
-"[code]full_objects[/code] is [code]true[/code], encoding objects is allowed "
-"(and can potentially include code)."
-msgstr ""
-
-#: doc/classes/Material.xml
-msgid "Abstract base [Resource] for coloring and shading geometry."
-msgstr ""
-
-#: doc/classes/Material.xml
-msgid ""
-"Material is a base [Resource] used for coloring and shading geometry. All "
-"materials inherit from it and almost all [VisualInstance] derived nodes "
-"carry a Material. A few flags and parameters are shared between all material "
-"types and are configured here."
-msgstr ""
-
-#: doc/classes/Material.xml
-msgid ""
-"Sets the [Material] to be used for the next pass. This renders the object "
-"again using a different material.\n"
-"[b]Note:[/b] This only applies to [SpatialMaterial]s and [ShaderMaterial]s "
-"with type \"Spatial\"."
-msgstr ""
-
-#: doc/classes/Material.xml
-msgid ""
-"Sets the render priority for transparent objects in 3D scenes. Higher "
-"priority objects will be sorted in front of lower priority objects.\n"
-"[b]Note:[/b] This only applies to sorting of transparent objects. This will "
-"not impact how transparent objects are sorted relative to opaque objects. "
-"This is because opaque objects are not sorted, while transparent objects are "
-"sorted from back to front (subject to priority)."
-msgstr ""
-
-#: doc/classes/Material.xml
-msgid "Maximum value for the [member render_priority] parameter."
-msgstr ""
-
-#: doc/classes/Material.xml
-msgid "Minimum value for the [member render_priority] parameter."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Special button that brings up a [PopupMenu] when clicked."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid ""
-"Special button that brings up a [PopupMenu] when clicked.\n"
-"New items can be created inside this [PopupMenu] using [code]get_popup()."
-"add_item(\"My Item Name\")[/code]. You can also create them directly from "
-"the editor. To do so, select the [MenuButton] node, then in the toolbar at "
-"the top of the 2D editor, click [b]Items[/b] then click [b]Add[/b] in the "
-"popup. You will be able to give each item new properties.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node."
-msgstr ""
-
-#: doc/classes/MenuButton.xml doc/classes/OptionButton.xml
-msgid ""
-"Returns the [PopupMenu] contained in this button.\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid ""
-"If [code]true[/code], shortcuts are disabled and cannot be used to trigger "
-"the button."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid ""
-"If [code]true[/code], when the cursor hovers above another [MenuButton] "
-"within the same parent which also has [code]switch_on_hover[/code] enabled, "
-"it will close the current [MenuButton] and open the other one."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Emitted when [PopupMenu] of this MenuButton is about to show."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Default text [Color] of the [MenuButton]."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Text [Color] used when the [MenuButton] is disabled."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid ""
-"Text [Color] used when the [MenuButton] is focused. Only replaces the normal "
-"text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Text [Color] used when the [MenuButton] is being hovered."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Text [Color] used when the [MenuButton] is being pressed."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "The horizontal space between [MenuButton]'s icon and text."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "[Font] of the [MenuButton]'s text."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "[StyleBox] used when the [MenuButton] is disabled."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid ""
-"[StyleBox] used when the [MenuButton] is focused. It is displayed over the "
-"current [StyleBox], so using [StyleBoxEmpty] will just disable the focus "
-"visual effect."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "[StyleBox] used when the [MenuButton] is being hovered."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "Default [StyleBox] for the [MenuButton]."
-msgstr ""
-
-#: doc/classes/MenuButton.xml
-msgid "[StyleBox] used when the [MenuButton] is being pressed."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "A [Resource] that contains vertex array-based geometry."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Mesh is a type of [Resource] that contains vertex array-based geometry, "
-"divided in [i]surfaces[/i]. Each surface contains a completely separate "
-"array and a material used to draw it. Design wise, a mesh with multiple "
-"surfaces is preferred to a single surface, because objects created in 3D "
-"editing software commonly contain multiple materials."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Calculate a [ConvexPolygonShape] from the mesh.\n"
-"If [code]clean[/code] is [code]true[/code] (default), duplicate and interior "
-"vertices are removed automatically. You can set it to [code]false[/code] to "
-"make the process faster if not needed.\n"
-"If [code]simplify[/code] is [code]true[/code], the geometry can be further "
-"simplified to reduce the amount of vertices. Disabled by default."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Calculate an outline mesh at a defined offset (margin) from the original "
-"mesh.\n"
-"[b]Note:[/b] This method typically returns the vertices in reverse order (e."
-"g. clockwise to counterclockwise)."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Calculate a [ConcavePolygonShape] from the mesh."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Generate a [TriangleMesh] from the mesh."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Returns the smallest [AABB] enclosing this mesh in local space. Not affected "
-"by [code]custom_aabb[/code]. See also [method VisualInstance."
-"get_transformed_aabb].\n"
-"[b]Note:[/b] This is only implemented for [ArrayMesh] and [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Returns all the vertices that make up the faces of the mesh. Each three "
-"vertices represent one triangle."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Returns the amount of surfaces that the [Mesh] holds."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Returns the arrays for the vertices, normals, uvs, etc. that make up the "
-"requested surface (see [method ArrayMesh.add_surface_from_arrays])."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Returns the blend shape arrays for the requested surface."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Returns a [Material] in a given surface. Surface is rendered using this "
-"material."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Sets a [Material] for a given surface. Surface will be rendered using this "
-"material."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Sets a hint to be used for lightmap resolution in [BakedLightmap]. Overrides "
-"[member BakedLightmap.default_texels_per_unit]."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as points (one vertex equals one point)."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as lines (every two vertices a line is created)."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as line strip."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as line loop (like line strip, but closed)."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as triangles (every three vertices a triangle is created)."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as triangle strips."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Render array as triangle fans."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Blend shapes are normalized."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Blend shapes are relative to base weight."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Mesh array contains vertices. All meshes require a vertex array so this "
-"should always be present."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains normals."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains tangents."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains colors."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains UVs."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains second UV."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains bones."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array contains bone weights."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Mesh array uses indices."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Used internally to calculate other [code]ARRAY_COMPRESS_*[/code] enum "
-"values. Do not use."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed (half float) vertex array."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed (half float) normal array."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed (half float) tangent array."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Flag used to mark a compressed (half float) color array.\n"
-"[b]Note:[/b] If this flag is enabled, vertex colors will be stored as 8-bit "
-"unsigned integers. This will clamp overbright colors to [code]Color(1, 1, 1, "
-"1)[/code] and reduce colors' precision."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed (half float) UV coordinates array."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid ""
-"Flag used to mark a compressed (half float) UV coordinates array for the "
-"second UV coordinates."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed bone array."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed (half float) weight array."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed index array."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark that the array contains 2D vertices."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid "Flag used to mark that the array uses 16-bit bones instead of 8-bit."
-msgstr ""
-
-#: doc/classes/Mesh.xml doc/classes/VisualServer.xml
-msgid ""
-"Flag used to mark that the array uses an octahedral representation of normal "
-"and tangent vectors rather than cartesian."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid ""
-"Used to set flags [constant ARRAY_COMPRESS_VERTEX], [constant "
-"ARRAY_COMPRESS_NORMAL], [constant ARRAY_COMPRESS_TANGENT], [constant "
-"ARRAY_COMPRESS_COLOR], [constant ARRAY_COMPRESS_TEX_UV], [constant "
-"ARRAY_COMPRESS_TEX_UV2], [constant ARRAY_COMPRESS_WEIGHTS], and [constant "
-"ARRAY_FLAG_USE_OCTAHEDRAL_COMPRESSION] quickly.\n"
-"[b]Note:[/b] Since this flag enables [constant ARRAY_COMPRESS_COLOR], vertex "
-"colors will be stored as 8-bit unsigned integers. This will clamp overbright "
-"colors to [code]Color(1, 1, 1, 1)[/code] and reduce colors' precision."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of vertices."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of normals."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of tangents as an array of floats, 4 floats per tangent."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of colors."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of UV coordinates."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of second set of UV coordinates."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of bone data."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of weights."
-msgstr ""
-
-#: doc/classes/Mesh.xml
-msgid "Array of indices."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Helper tool to access and edit [Mesh] data."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid ""
-"MeshDataTool provides access to individual vertices in a [Mesh]. It allows "
-"users to read and edit vertex data of meshes. It also creates an array of "
-"faces and edges.\n"
-"To use MeshDataTool, load a mesh with [method create_from_surface]. When you "
-"are finished editing the data commit the data to a mesh with [method "
-"commit_to_surface].\n"
-"Below is an example of how MeshDataTool may be used.\n"
-"[codeblock]\n"
-"var mesh = ArrayMesh.new()\n"
-"mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, CubeMesh.new()."
-"get_mesh_arrays())\n"
-"var mdt = MeshDataTool.new()\n"
-"mdt.create_from_surface(mesh, 0)\n"
-"for i in range(mdt.get_vertex_count()):\n"
-"    var vertex = mdt.get_vertex(i)\n"
-"    # In this example we extend the mesh by one unit, which results in "
-"separated faces as it is flat shaded.\n"
-"    vertex += mdt.get_vertex_normal(i)\n"
-"    # Save your change.\n"
-"    mdt.set_vertex(i, vertex)\n"
-"mesh.surface_remove(0)\n"
-"mdt.commit_to_surface(mesh)\n"
-"var mi = MeshInstance.new()\n"
-"mi.mesh = mesh\n"
-"add_child(mi)\n"
-"[/codeblock]\n"
-"See also [ArrayMesh], [ImmediateGeometry] and [SurfaceTool] for procedural "
-"geometry generation.\n"
-"[b]Note:[/b] Godot uses clockwise [url=https://learnopengl.com/Advanced-"
-"OpenGL/Face-culling]winding order[/url] for front faces of triangle "
-"primitive modes."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Clears all data currently in MeshDataTool."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Adds a new surface to specified [Mesh] with edited data."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid ""
-"Uses specified surface of given [Mesh] to populate data for MeshDataTool.\n"
-"Requires [Mesh] with primitive type [constant Mesh.PRIMITIVE_TRIANGLES]."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the number of edges in this [Mesh]."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns array of faces that touch given edge."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns meta information assigned to given edge."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid ""
-"Returns index of specified vertex connected to given edge.\n"
-"Vertex argument can only be 0 or 1 because edges are comprised of two "
-"vertices."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the number of faces in this [Mesh]."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid ""
-"Returns specified edge associated with given face.\n"
-"Edge argument must be either 0, 1, or 2 because a face only has three edges."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the metadata associated with the given face."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Calculates and returns the face normal of the given face."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid ""
-"Returns the specified vertex of the given face.\n"
-"Vertex argument must be either 0, 1, or 2 because faces contain three "
-"vertices."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid ""
-"Returns the [Mesh]'s format. Format is an integer made up of [Mesh] format "
-"flags combined together. For example, a mesh containing both vertices and "
-"normals would return a format of [code]3[/code] because [constant ArrayMesh."
-"ARRAY_FORMAT_VERTEX] is [code]1[/code] and [constant ArrayMesh."
-"ARRAY_FORMAT_NORMAL] is [code]2[/code].\n"
-"See [enum ArrayMesh.ArrayFormat] for a list of format flags."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the material assigned to the [Mesh]."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the vertex at given index."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the bones of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the color of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the total number of vertices in [Mesh]."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns an array of edges that share the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns an array of faces that share the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the metadata associated with the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the normal of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the tangent of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the UV of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns the UV2 of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Returns bone weights of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the metadata of the given edge."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the metadata of the given face."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the material to be used by newly-constructed [Mesh]."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the position of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the bones of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the color of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the metadata associated with the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the normal of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the tangent of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the UV of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the UV2 of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshDataTool.xml
-msgid "Sets the bone weights of the given vertex."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid "Node that instances meshes into a scenario."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"MeshInstance is a node that takes a [Mesh] resource and adds it to the "
-"current scenario by creating an instance of it. This is the class most often "
-"used to get 3D geometry rendered and can be used to instance a single [Mesh] "
-"in many places. This allows reusing geometry, which can save on resources. "
-"When a [Mesh] has to be instanced more than thousands of times at close "
-"proximity, consider using a [MultiMesh] in a [MultiMeshInstance] instead."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"This helper creates a [StaticBody] child node with a [ConvexPolygonShape] "
-"collision shape calculated from the mesh geometry. It's mainly used for "
-"testing.\n"
-"If [code]clean[/code] is [code]true[/code] (default), duplicate and interior "
-"vertices are removed automatically. You can set it to [code]false[/code] to "
-"make the process faster if not needed.\n"
-"If [code]simplify[/code] is [code]true[/code], the geometry can be further "
-"simplified to reduce the amount of vertices. Disabled by default."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"This helper creates a [MeshInstance] child node with gizmos at every vertex "
-"calculated from the mesh geometry. It's mainly used for testing."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"This helper creates a [StaticBody] child node with multiple "
-"[ConvexPolygonShape] collision shapes calculated from the mesh geometry via "
-"convex decomposition. It's mainly used for testing."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"This helper creates a [StaticBody] child node with a [ConcavePolygonShape] "
-"collision shape calculated from the mesh geometry. It's mainly used for "
-"testing."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"Returns the [Material] that will be used by the [Mesh] when drawing. This "
-"can return the [member GeometryInstance.material_override], the surface "
-"override [Material] defined in this [MeshInstance], or the surface "
-"[Material] defined in the [Mesh]. For example, if [member GeometryInstance."
-"material_override] is used, all surfaces will return the override material."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"Returns the override [Material] for a surface of the [Mesh] resource.\n"
-"[b]Note:[/b] This function only returns [i]override[/i] materials associated "
-"with this [MeshInstance]. Consider using [method get_active_material] or "
-"[method Mesh.surface_get_material] to get materials associated with the "
-"[Mesh] resource."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-#, fuzzy
-msgid "Returns the number of surface override materials."
-msgstr "Gibt die Anzahl der Punkte auf der Blend-Achse zurück."
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"Returns [code]true[/code] if this [MeshInstance] can be merged with the "
-"specified [code]other_mesh_instance[/code], using the [method MeshInstance."
-"merge_meshes] function.\n"
-"In order to be mergeable, properties of the [MeshInstance] must match, and "
-"each surface must match, in terms of material, attributes and vertex format."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"This function can merge together the data from several source "
-"[MeshInstance]s into a single destination [MeshInstance] (the MeshInstance "
-"the function is called from). This is primarily useful for improving "
-"performance by reducing the number of drawcalls and [Node]s.\n"
-"Merging should only be attempted for simple meshes that do not contain "
-"animation.\n"
-"The final vertices can either be returned in global space, or in local space "
-"relative to the destination [MeshInstance] global transform (the destination "
-"Node must be inside the [SceneTree] for local space to work).\n"
-"The function will make a final check for compatibility between the "
-"[MeshInstance]s by default, this should always be used unless you have "
-"previously checked for compatibility using [method MeshInstance."
-"is_mergeable_with]. If the compatibility check is omitted and the meshes are "
-"merged, you may see rendering errors.\n"
-"[b]Note:[/b] The requirements for similarity between meshes are quite "
-"stringent. They can be checked using the [method MeshInstance."
-"is_mergeable_with] function prior to calling [method MeshInstance."
-"merge_meshes].\n"
-"Also note that any initial data in the destination [MeshInstance] data will "
-"be discarded."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"Sets the override [Material] for the specified surface of the [Mesh] "
-"resource. This material is associated with this [MeshInstance] rather than "
-"with the [Mesh] resource."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid "The [Mesh] resource for the instance."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid "[NodePath] to the [Skeleton] associated with the instance."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid "Sets the skin to be used by this instance."
-msgstr ""
-
-#: doc/classes/MeshInstance.xml
-msgid ""
-"If [code]true[/code], normals are transformed when software skinning is "
-"used. Set to [code]false[/code] when normals are not needed for better "
-"performance.\n"
-"See [member ProjectSettings.rendering/quality/skinning/"
-"software_skinning_fallback] for details about how software skinning is "
-"enabled."
-msgstr ""
-
-#: doc/classes/MeshInstance2D.xml
-msgid "Node used for displaying a [Mesh] in 2D."
-msgstr ""
-
-#: doc/classes/MeshInstance2D.xml
-msgid ""
-"Node used for displaying a [Mesh] in 2D. A [MeshInstance2D] can be "
-"automatically created from an existing [Sprite] via a tool in the editor "
-"toolbar. Select the [Sprite] node, then choose [b]Sprite > Convert to "
-"MeshInstance2D[/b] at the top of the 2D editor viewport."
-msgstr ""
-
-#: doc/classes/MeshInstance2D.xml
-msgid "The [Mesh] that will be drawn by the [MeshInstance2D]."
-msgstr ""
-
-#: doc/classes/MeshInstance2D.xml doc/classes/MultiMeshInstance2D.xml
-msgid ""
-"The normal map that will be used if using the default [CanvasItemMaterial].\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y+, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/MeshInstance2D.xml doc/classes/MultiMeshInstance2D.xml
-msgid ""
-"The [Texture] that will be used if using the default [CanvasItemMaterial]. "
-"Can be accessed as [code]TEXTURE[/code] in CanvasItem shader."
-msgstr ""
-
-#: doc/classes/MeshInstance2D.xml doc/classes/MultiMeshInstance2D.xml
-msgid "Emitted when the [member texture] is changed."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Library of meshes."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid ""
-"A library of meshes. Contains a list of [Mesh] resources, each with a name "
-"and ID. Each item can also include collision and navigation shapes. This "
-"resource is used in [GridMap]."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Clears the library."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid ""
-"Creates a new item in the library with the given ID.\n"
-"You can get an unused ID from [method get_last_unused_item_id]."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Returns the first item with the given name."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Returns the list of item IDs in use."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Returns the item's mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-#, fuzzy
-msgid "Returns the transform applied to the item's mesh."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/MeshLibrary.xml
-msgid "Returns the item's name."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Returns the item's navigation mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Returns the transform applied to the item's navigation mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid ""
-"When running in the editor, returns a generated item preview (a 3D rendering "
-"in isometric perspective). When used in a running project, returns the "
-"manually-defined item preview which can be set using [method "
-"set_item_preview]. Returns an empty [Texture] if no preview was manually set "
-"in a running project."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid ""
-"Returns an item's collision shapes.\n"
-"The array consists of each [Shape] followed by its [Transform]."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Gets an unused ID for a new item."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Removes the item."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Sets the item's mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Sets the transform to apply to the item's mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid ""
-"Sets the item's name.\n"
-"This name is shown in the editor. It can also be used to look up the item "
-"later using [method find_item_by_name]."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Sets the item's navigation mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Sets the transform to apply to the item's navigation mesh."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid "Sets a texture to use as the item's preview icon in the editor."
-msgstr ""
-
-#: doc/classes/MeshLibrary.xml
-msgid ""
-"Sets an item's collision shapes.\n"
-"The array should consist of [Shape] objects, each followed by a [Transform] "
-"that will be applied to it. For shapes that should not have a transform, use "
-"[constant Transform.IDENTITY]."
-msgstr ""
-
-#: doc/classes/MeshTexture.xml
-msgid "Simple texture that uses a mesh to draw itself."
-msgstr ""
-
-#: doc/classes/MeshTexture.xml
-msgid ""
-"Simple texture that uses a mesh to draw itself. It's limited because flags "
-"can't be changed and region drawing is not supported."
-msgstr ""
-
-#: doc/classes/MeshTexture.xml
-msgid "Sets the base texture that the Mesh will use to draw."
-msgstr ""
-
-#: doc/classes/MeshTexture.xml
-msgid "Sets the size of the image, needed for reference."
-msgstr ""
-
-#: doc/classes/MeshTexture.xml
-msgid "Sets the mesh used to draw. It must be a mesh using 2D vertices."
-msgstr ""
-
-#: doc/classes/MethodTweener.xml
-msgid ""
-"Interpolates an abstract value and supplies it to a method called over time."
-msgstr ""
-
-#: doc/classes/MethodTweener.xml
-msgid ""
-"[MethodTweener] is similar to a combination of [CallbackTweener] and "
-"[PropertyTweener]. It calls a method providing an interpolated value as a "
-"parameter. See [method SceneTreeTween.tween_method] for more usage "
-"information.\n"
-"[b]Note:[/b] [method SceneTreeTween.tween_method] is the only correct way to "
-"create [MethodTweener]. Any [MethodTweener] created manually will not "
-"function correctly."
-msgstr ""
-
-#: doc/classes/MethodTweener.xml
-msgid ""
-"Sets the time in seconds after which the [MethodTweener] will start "
-"interpolating. By default there's no delay."
-msgstr ""
-
-#: doc/classes/MethodTweener.xml doc/classes/PropertyTweener.xml
-msgid ""
-"Sets the type of used easing from [enum Tween.EaseType]. If not set, the "
-"default easing is used from the [SceneTreeTween] that contains this Tweener."
-msgstr ""
-
-#: doc/classes/MethodTweener.xml doc/classes/PropertyTweener.xml
-msgid ""
-"Sets the type of used transition from [enum Tween.TransitionType]. If not "
-"set, the default transition is used from the [SceneTreeTween] that contains "
-"this Tweener."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid "Generic mobile VR implementation."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid ""
-"This is a generic mobile VR implementation where you need to provide details "
-"about the phone and HMD used. It does not rely on any existing framework. "
-"This is the most basic interface we have. For the best effect, you need a "
-"mobile phone with a gyroscope and accelerometer.\n"
-"Note that even though there is no positional tracking, the camera will "
-"assume the headset is at a height of 1.85 meters. You can change this by "
-"setting [member eye_height].\n"
-"You can initialise this interface as follows:\n"
-"[codeblock]\n"
-"var interface = ARVRServer.find_interface(\"Native mobile\")\n"
-"if interface and interface.initialize():\n"
-"    get_viewport().arvr = true\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid ""
-"The distance between the display and the lenses inside of the device in "
-"centimeters."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid "The width of the display in centimeters."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid ""
-"The height at which the camera is placed in relation to the ground (i.e. "
-"[ARVROrigin] node)."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid ""
-"The interocular distance, also known as the interpupillary distance. The "
-"distance between the pupils of the left and right eye."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid ""
-"The k1 lens factor is one of the two constants that define the strength of "
-"the lens used and directly influences the lens distortion effect."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid "The k2 lens factor, see k1."
-msgstr ""
-
-#: modules/mobile_vr/doc_classes/MobileVRInterface.xml
-msgid ""
-"The oversample setting. Because of the lens distortion we have to render our "
-"buffers at a higher resolution then the screen can natively handle. A value "
-"between 1.5 and 2.0 often provides good results but at the cost of "
-"performance."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Provides high-performance mesh instancing."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"MultiMesh provides low-level mesh instancing. Drawing thousands of "
-"[MeshInstance] nodes can be slow, since each object is submitted to the GPU "
-"then drawn individually.\n"
-"MultiMesh is much faster as it can draw thousands of instances with a single "
-"draw call, resulting in less API overhead.\n"
-"As a drawback, if the instances are too far away from each other, "
-"performance may be reduced as every single instance will always render (they "
-"are spatially indexed as one, for the whole object).\n"
-"Since instances may have any behavior, the AABB used for visibility must be "
-"provided by the user."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Returns the visibility axis-aligned bounding box in local space. See also "
-"[method VisualInstance.get_transformed_aabb]."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Gets a specific instance's color."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Returns the custom data that has been set for a specific instance."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Returns the [Transform] of a specific instance."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Returns the [Transform2D] of a specific instance."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"When using [i]physics interpolation[/i], this function allows you to prevent "
-"interpolation on an instance in the current physics tick.\n"
-"This allows you to move instances instantaneously, and should usually be "
-"used when initially placing an instance such as a bullet to prevent "
-"graphical glitches."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Sets all data related to the instances in one go. This is especially useful "
-"when loading the data from disk or preparing the data from GDNative.\n"
-"All data is packed in one large float array. An array may look like this: "
-"Transform for instance 1, color data for instance 1, custom data for "
-"instance 1, transform for instance 2, color data for instance 2, etc...\n"
-"[Transform] is stored as 12 floats, [Transform2D] is stored as 8 floats, "
-"[code]COLOR_8BIT[/code] / [code]CUSTOM_DATA_8BIT[/code] is stored as 1 float "
-"(4 bytes as is) and [code]COLOR_FLOAT[/code] / [code]CUSTOM_DATA_FLOAT[/"
-"code] is stored as 4 floats."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"An alternative version of [method MultiMesh.set_as_bulk_array] which can be "
-"used with [i]physics interpolation[/i]. This method takes two arrays, and "
-"can set the data for the current and previous tick in one go. The renderer "
-"will automatically interpolate the data at each frame.\n"
-"This is useful for situations where the order of instances may change from "
-"physics tick to tick, such as particle systems.\n"
-"When the order of instances is coherent, the simpler [method MultiMesh."
-"set_as_bulk_array] can still be used with interpolation."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Sets the color of a specific instance by [i]multiplying[/i] the mesh's "
-"existing vertex colors.\n"
-"For the color to take effect, ensure that [member color_format] is non-"
-"[code]null[/code] on the [MultiMesh] and [member SpatialMaterial."
-"vertex_color_use_as_albedo] is [code]true[/code] on the material. If the "
-"color doesn't look as expected, make sure the material's albedo color is set "
-"to pure white ([code]Color(1, 1, 1)[/code])."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Sets custom data for a specific instance. Although [Color] is used, it is "
-"just a container for 4 floating point numbers. The format of the number can "
-"change depending on the [enum CustomDataFormat] used."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Sets the [Transform] for a specific instance."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Sets the [Transform2D] for a specific instance."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Format of colors in color array that gets passed to shader."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Format of custom data in custom data array that gets passed to shader."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Number of instances that will get drawn. This clears and (re)sizes the "
-"buffers. By default, all instances are drawn but you can limit this with "
-"[member visible_instance_count]."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Mesh to be drawn."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Choose whether to use an interpolation method that favors speed or quality.\n"
-"When using low physics tick rates (typically below 20) or high rates of "
-"object rotation, you may get better results from the high quality setting.\n"
-"[b]Note:[/b] Fast quality does not equate to low quality. Except in the "
-"special cases mentioned above, the quality should be comparable to high "
-"quality."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Format of transform used to transform mesh, either 2D or 3D."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Limits the number of instances drawn, -1 draws all instances. Changing this "
-"does not change the sizes of the buffers."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Use this when using 2D transforms."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Use this when using 3D transforms."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Use when you are not using per-instance [Color]s."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Compress [Color] data into 8 bits when passing to shader. This uses less "
-"memory and can be faster, but the [Color] loses precision."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"The [Color] passed into [method set_instance_color] will use 4 floats. Use "
-"this for highest precision [Color]."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid "Use when you are not using per-instance custom data."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Compress custom_data into 8 bits when passing to shader. This uses less "
-"memory and can be faster, but loses precision and range. Floats packed into "
-"8 bits can only represent values between 0 and 1, numbers outside that range "
-"will be clamped."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"The [Color] passed into [method set_instance_custom_data] will use 4 floats. "
-"Use this for highest precision."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Always interpolate using Basis lerping, which can produce warping artifacts "
-"in some situations."
-msgstr ""
-
-#: doc/classes/MultiMesh.xml
-msgid ""
-"Attempt to interpolate using Basis slerping (spherical linear interpolation) "
-"where possible, otherwise fall back to lerping."
-msgstr ""
-
-#: doc/classes/MultiMeshInstance.xml
-msgid "Node that instances a [MultiMesh]."
-msgstr ""
-
-#: doc/classes/MultiMeshInstance.xml
-msgid ""
-"[MultiMeshInstance] is a specialized node to instance [GeometryInstance]s "
-"based on a [MultiMesh] resource.\n"
-"This is useful to optimize the rendering of a high amount of instances of a "
-"given mesh (for example trees in a forest or grass strands)."
-msgstr ""
-
-#: doc/classes/MultiMeshInstance.xml
-msgid ""
-"The [MultiMesh] resource that will be used and shared among all instances of "
-"the [MultiMeshInstance]."
-msgstr ""
-
-#: doc/classes/MultiMeshInstance2D.xml
-msgid "Node that instances a [MultiMesh] in 2D."
-msgstr ""
-
-#: doc/classes/MultiMeshInstance2D.xml
-msgid ""
-"[MultiMeshInstance2D] is a specialized node to instance a [MultiMesh] "
-"resource in 2D.\n"
-"Usage is the same as [MultiMeshInstance]."
-msgstr ""
-
-#: doc/classes/MultiMeshInstance2D.xml
-msgid "The [MultiMesh] that will be drawn by the [MultiMeshInstance2D]."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid "High-level multiplayer API."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"This class implements most of the logic behind the high-level multiplayer "
-"API. See also [NetworkedMultiplayerPeer].\n"
-"By default, [SceneTree] has a reference to this class that is used to "
-"provide multiplayer capabilities (i.e. RPC/RSET) across the whole scene.\n"
-"It is possible to override the MultiplayerAPI instance used by specific "
-"Nodes by setting the [member Node.custom_multiplayer] property, effectively "
-"allowing to run both client and server in the same scene.\n"
-"[b]Note:[/b] The high-level multiplayer API protocol is an implementation "
-"detail and isn't meant to be used by non-Godot servers. It may change "
-"without notice."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Clears the current MultiplayerAPI network state (you shouldn't call this "
-"unless you know what you are doing)."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Returns the peer IDs of all connected peers of this MultiplayerAPI's [member "
-"network_peer]."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Returns the unique peer ID of this MultiplayerAPI's [member network_peer]."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Returns the sender's peer ID for the RPC currently being executed.\n"
-"[b]Note:[/b] If not inside an RPC this method will return 0."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml doc/classes/SceneTree.xml
-msgid "Returns [code]true[/code] if there is a [member network_peer] set."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Returns [code]true[/code] if this MultiplayerAPI's [member network_peer] is "
-"in server mode (listening for connections)."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Method used for polling the MultiplayerAPI. You only need to worry about "
-"this if you are using [member Node.custom_multiplayer] override or you set "
-"[member SceneTree.multiplayer_poll] to [code]false[/code]. By default, "
-"[SceneTree] will poll its MultiplayerAPI for you.\n"
-"[b]Note:[/b] This method results in RPCs and RSETs being called, so they "
-"will be executed in the same context of this function (e.g. [code]_process[/"
-"code], [code]physics[/code], [Thread])."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Sends the given raw [code]bytes[/code] to a specific peer identified by "
-"[code]id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer]). "
-"Default ID is [code]0[/code], i.e. broadcast to all peers."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code] (or if the [member network_peer] has [member PacketPeer."
-"allow_object_decoding] set to [code]true[/code]), the MultiplayerAPI will "
-"allow encoding and decoding of object during RPCs/RSETs.\n"
-"[b]Warning:[/b] Deserialized objects can contain code which gets executed. "
-"Do not use this option if the serialized object comes from untrusted sources "
-"to avoid potential security threats such as remote code execution."
-msgstr ""
-"Dekodiert ein Byte-Array zurück zu einem Wert. Wenn [code]allow_objects[/"
-"code] gleich [code]wahr[/code], ist die Dekodierung von Objekten erlaubt.\n"
-"[b]WARNUNG:[/b] Deserialisierte Objekte können Code enthalten, der "
-"ausgeführt wird. Verwenden Sie diese Option nicht, wenn das serialisierte "
-"Objekt aus nicht vertrauenswürdigen Quellen stammt, um potenzielle "
-"Sicherheitsbedrohungen zu vermeiden (entfernte Codeausführung)."
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"The peer object to handle the RPC system (effectively enabling networking "
-"when set). Depending on the peer itself, the MultiplayerAPI will become a "
-"network server (check with [method is_network_server]) and will set root "
-"node's network mode to master, or it will become a regular peer with root "
-"node set to puppet. All child nodes are set to inherit the network mode by "
-"default. Handling of networking-related events (connection, disconnection, "
-"new clients) is done by connecting to MultiplayerAPI's signals."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"If [code]true[/code], the MultiplayerAPI's [member network_peer] refuses new "
-"incoming connections."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"The root node to use for RPCs. Instead of an absolute path, a relative path "
-"will be used to find the node upon which the RPC should be executed.\n"
-"This effectively allows to have different branches of the scene tree to be "
-"managed by different MultiplayerAPI, allowing for example to run both client "
-"and server in the same scene."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Emitted when this MultiplayerAPI's [member network_peer] successfully "
-"connected to a server. Only emitted on clients."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Emitted when this MultiplayerAPI's [member network_peer] fails to establish "
-"a connection to a server. Only emitted on clients."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Emitted when this MultiplayerAPI's [member network_peer] connects with a new "
-"peer. ID is the peer ID of the new peer. Clients get notified when other "
-"clients connect to the same server. Upon connecting to a server, a client "
-"also receives this signal for the server (with ID being 1)."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Emitted when this MultiplayerAPI's [member network_peer] disconnects from a "
-"peer. Clients get notified when other clients disconnect from the same "
-"server."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Emitted when this MultiplayerAPI's [member network_peer] receive a "
-"[code]packet[/code] with custom data (see [method send_bytes]). ID is the "
-"peer ID of the peer that sent the packet."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Emitted when this MultiplayerAPI's [member network_peer] disconnects from "
-"server. Only emitted on clients."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Used with [method Node.rpc_config] or [method Node.rset_config] to disable a "
-"method or property for all RPC calls, making it unavailable. Default for all "
-"methods."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Used with [method Node.rpc_config] or [method Node.rset_config] to set a "
-"method to be called or a property to be changed only on the remote end, not "
-"locally. Analogous to the [code]remote[/code] keyword. Calls and property "
-"changes are accepted from all remote peers, no matter if they are node's "
-"master or puppets."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Used with [method Node.rpc_config] or [method Node.rset_config] to set a "
-"method to be called or a property to be changed only on the network master "
-"for this node. Analogous to the [code]master[/code] keyword. Only accepts "
-"calls or property changes from the node's network puppets, see [method Node."
-"set_network_master]."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Used with [method Node.rpc_config] or [method Node.rset_config] to set a "
-"method to be called or a property to be changed only on puppets for this "
-"node. Analogous to the [code]puppet[/code] keyword. Only accepts calls or "
-"property changes from the node's network master, see [method Node."
-"set_network_master]."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"[i]Deprecated.[/i] Use [constant RPC_MODE_PUPPET] instead. Analogous to the "
-"[code]slave[/code] keyword."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Behave like [constant RPC_MODE_REMOTE] but also make the call or property "
-"change locally. Analogous to the [code]remotesync[/code] keyword."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"[i]Deprecated.[/i] Use [constant RPC_MODE_REMOTESYNC] instead. Analogous to "
-"the [code]sync[/code] keyword."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Behave like [constant RPC_MODE_MASTER] but also make the call or property "
-"change locally. Analogous to the [code]mastersync[/code] keyword."
-msgstr ""
-
-#: doc/classes/MultiplayerAPI.xml
-msgid ""
-"Behave like [constant RPC_MODE_PUPPET] but also make the call or property "
-"change locally. Analogous to the [code]puppetsync[/code] keyword."
-msgstr ""
-
-#: doc/classes/Mutex.xml
-msgid "A synchronization mutex (mutual exclusion)."
-msgstr ""
-
-#: doc/classes/Mutex.xml
-msgid ""
-"A synchronization mutex (mutual exclusion). This is used to synchronize "
-"multiple [Thread]s, and is equivalent to a binary [Semaphore]. It guarantees "
-"that only one thread can ever acquire the lock at a time. A mutex can be "
-"used to protect a critical section; however, be careful to avoid deadlocks."
-msgstr ""
-
-#: doc/classes/Mutex.xml
-msgid ""
-"Locks this [Mutex], blocks until it is unlocked by the current owner.\n"
-"[b]Note:[/b] This function returns without blocking if the thread already "
-"has ownership of the mutex."
-msgstr ""
-
-#: doc/classes/Mutex.xml
-msgid ""
-"Tries locking this [Mutex], but does not block. Returns [constant OK] on "
-"success, [constant ERR_BUSY] otherwise.\n"
-"[b]Note:[/b] This function returns [constant OK] if the thread already has "
-"ownership of the mutex."
-msgstr ""
-
-#: doc/classes/Mutex.xml
-msgid ""
-"Unlocks this [Mutex], leaving it to other threads.\n"
-"[b]Note:[/b] If a thread called [method lock] or [method try_lock] multiple "
-"times while already having ownership of the mutex, it must also call [method "
-"unlock] the same number of times in order to unlock it correctly."
-msgstr ""
-
-#: modules/gdnative/doc_classes/NativeScript.xml
-msgid ""
-"Returns the documentation string that was previously set with "
-"[code]godot_nativescript_set_class_documentation[/code]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/NativeScript.xml
-msgid ""
-"Returns the documentation string that was previously set with "
-"[code]godot_nativescript_set_method_documentation[/code]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/NativeScript.xml
-msgid ""
-"Returns the documentation string that was previously set with "
-"[code]godot_nativescript_set_property_documentation[/code]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/NativeScript.xml
-msgid ""
-"Returns the documentation string that was previously set with "
-"[code]godot_nativescript_set_signal_documentation[/code]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/NativeScript.xml
-msgid ""
-"Constructs a new object of the base type with a script of this type already "
-"attached.\n"
-"[b]Note:[/b] Any arguments passed to this function will be ignored and not "
-"passed to the native constructor function. This will change with in a future "
-"API extension."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid "Mesh-based navigation and pathfinding node."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid ""
-"[i]Deprecated.[/i] [Navigation] node and [method get_simple_path] are "
-"deprecated and will be removed in a future version. Use [method "
-"NavigationServer.map_get_path] instead.\n"
-"Provides navigation and pathfinding within a collection of "
-"[NavigationMesh]es. By default, these will be automatically collected from "
-"child [NavigationMeshInstance] nodes. In addition to basic pathfinding, this "
-"class also assists with aligning navigation agents with the meshes they are "
-"navigating on."
-msgstr ""
-
-#: doc/classes/Navigation.xml doc/classes/NavigationMesh.xml
-#: doc/classes/NavigationServer.xml
-msgid "3D Navmesh Demo"
-msgstr ""
-
-#: doc/classes/Navigation.xml doc/classes/Navigation2D.xml
-msgid ""
-"Returns the navigation point closest to the point given. Points are in local "
-"coordinate space."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid ""
-"Returns the surface normal at the navigation point closest to the point "
-"given. Useful for rotating a navigation agent according to the navigation "
-"mesh it moves on."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid ""
-"Returns the owner of the [NavigationMesh] which contains the navigation "
-"point closest to the point given. This is usually a [NavigationMeshInstance]."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid ""
-"Returns the navigation point closest to the given line segment. When "
-"enabling [code]use_collision[/code], only considers intersection points "
-"between segment and navigation meshes. If multiple intersection points are "
-"found, the one closest to the segment start point is returned."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-#, fuzzy
-msgid "Returns the [RID] of the navigation map on the [NavigationServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/Navigation.xml
-msgid ""
-"[i]Deprecated.[/i] [Navigation] node and [method get_simple_path] are "
-"deprecated and will be removed in a future version. Use [method "
-"NavigationServer.map_get_path] instead.\n"
-"Returns the path between two given points. Points are in local coordinate "
-"space. If [code]optimize[/code] is [code]true[/code] (the default), the "
-"agent properties associated with each [NavigationMesh] (radius, height, "
-"etc.) are considered in the path calculation, otherwise they are ignored."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-#, fuzzy
-msgid "The cell height to use for fields."
-msgstr "Der Anrufmodus, der für Spuren der Anrufmethode verwendet werden soll."
-
-#: doc/classes/Navigation.xml doc/classes/NavigationMesh.xml
-msgid "The XZ plane cell size to use for fields."
-msgstr ""
-
-#: doc/classes/Navigation.xml doc/classes/Navigation2D.xml
-msgid ""
-"This value is used to detect the near edges to connect compatible regions."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid ""
-"A bitfield determining all navigation map layers the navigation can use on a "
-"[method Navigation.get_simple_path] path query."
-msgstr ""
-
-#: doc/classes/Navigation.xml
-msgid ""
-"Defines which direction is up. By default, this is [code](0, 1, 0)[/code], "
-"which is the world's \"up\" direction."
-msgstr ""
-
-#: doc/classes/Navigation.xml doc/classes/Navigation2DServer.xml
-#: doc/classes/NavigationServer.xml
-msgid ""
-"Emitted when a navigation map is updated, when a region moves or is modified."
-msgstr ""
-
-#: doc/classes/Navigation2D.xml
-msgid "2D navigation and pathfinding node."
-msgstr ""
-
-#: doc/classes/Navigation2D.xml
-msgid ""
-"[i]Deprecated.[/i] [Navigation2D] node and [method get_simple_path] are "
-"deprecated and will be removed in a future version. Use [method "
-"Navigation2DServer.map_get_path] instead.\n"
-"Navigation2D provides navigation and pathfinding within a 2D area, specified "
-"as a collection of [NavigationPolygon] resources. By default, these are "
-"automatically collected from child [NavigationPolygonInstance] nodes."
-msgstr ""
-
-#: doc/classes/Navigation2D.xml doc/classes/Navigation2DServer.xml
-#: doc/classes/NavigationPolygon.xml
-msgid "2D Navigation Demo"
-msgstr ""
-
-#: doc/classes/Navigation2D.xml
-msgid ""
-"Returns the owner of the [NavigationPolygon] which contains the navigation "
-"point closest to the point given. This is usually a "
-"[NavigationPolygonInstance]."
-msgstr ""
-
-#: doc/classes/Navigation2D.xml
-msgid ""
-"[i]Deprecated.[/i] [Navigation2D] node and [method get_simple_path] are "
-"deprecated and will be removed in a future version. Use [method "
-"Navigation2DServer.map_get_path] instead.\n"
-"Returns the path between two given points. Points are in local coordinate "
-"space. If [code]optimize[/code] is [code]true[/code] (the default), the path "
-"is smoothed by merging path segments where possible."
-msgstr ""
-
-#: doc/classes/Navigation2D.xml
-#, fuzzy
-msgid "The XY plane cell size to use for fields."
-msgstr "Der Anrufmodus, der für Spuren der Anrufmethode verwendet werden soll."
-
-#: doc/classes/Navigation2D.xml
-msgid ""
-"A bitfield determining all navigation map layers the navigation can use on a "
-"[method Navigation2D.get_simple_path] path query."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml
-#, fuzzy
-msgid "Server interface for low-level 2D navigation access."
-msgstr "Schnittstelle zu AES-Verschlüsselungsfunktionen auf niedriger Ebene."
-
-#: doc/classes/Navigation2DServer.xml
-msgid ""
-"Navigation2DServer is the server responsible for all 2D navigation. It "
-"handles several objects, namely maps, regions and agents.\n"
-"Maps are made up of regions, which are made of navigation polygons. "
-"Together, they define the navigable areas in the 2D world.\n"
-"[b]Note:[/b] Most NavigationServer changes take effect after the next "
-"physics frame and not immediately. This includes all changes made to maps, "
-"regions or agents by navigation related Nodes in the SceneTree or made "
-"through scripts.\n"
-"For two regions to be connected to each other, they must share a similar "
-"edge. An edge is considered connected to another if both of its two vertices "
-"are at a distance less than navigation map [code]edge_connection_margin[/"
-"code] to the respective other edge's vertex.\n"
-"You may assign navigation layers to regions with [method Navigation2DServer."
-"region_set_navigation_layers], which then can be checked upon when "
-"requesting a path with [method Navigation2DServer.map_get_path]. This allows "
-"allowing or forbidding some areas to 2D objects.\n"
-"To use the collision avoidance system, you may use agents. You can set an "
-"agent's target velocity, then the servers will emit a callback with a "
-"modified velocity.\n"
-"[b]Note:[/b] The collision avoidance system ignores regions. Using the "
-"modified velocity as-is might lead to pushing and agent outside of a "
-"navigable area. This is a limitation of the collision avoidance system, any "
-"more complex situation may require the use of the physics engine.\n"
-"This server keeps tracks of any call and executes them during the sync "
-"phase. This means that you can request any change to the map, using any "
-"thread, without worrying."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Creates the agent."
-msgstr "Benennt das übergebene Node um."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid ""
-"Returns the navigation map [RID] the requested [code]agent[/code] is "
-"currently assigned to."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if the map got changed the previous frame."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Graph das übergebene Node enthält."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Callback called at the end of the RVO process. If a callback is created "
-"manually and the agent is placed on a navigation map it will calculate "
-"avoidance for the agent and dispatch the calculated [code]safe_velocity[/"
-"code] to the [code]receiver[/code] object with a signal to the chosen "
-"[code]method[/code] name.\n"
-"[b]Note:[/b] Created callbacks are always processed independently of the "
-"SceneTree state as long as the agent is on a navigation map and not freed. "
-"To disable the dispatch of a callback from an agent use [method "
-"agent_set_callback] again with a [code]null[/code] object as the "
-"[code]receiver[/code]."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Puts the agent in the map."
-msgstr "Gibt den Tangens des Parameters zurück."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Sets the maximum number of other agents the agent takes into account in the "
-"navigation. The larger this number, the longer the running time of the "
-"simulation. If the number is too low, the simulation will not be safe."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the maximum speed of the agent. Must be positive."
-msgstr "Ruft den Namen eines Eingangs nach Index ab."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Sets the maximum distance to other agents this agent takes into account in "
-"the navigation. The larger this number, the longer the running time of the "
-"simulation. If the number is too low, the simulation will not be safe."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the position of the agent in world space."
-msgstr "Liefert die Position der 8 Endpunkte des [AABB] im Raum."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the radius of the agent."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the new target velocity."
-msgstr "Der Zeichen-Offset der Textur."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"The minimal amount of time for which the agent's velocities that are "
-"computed by the simulation are safe with respect to other agents. The larger "
-"this number, the sooner this agent will respond to the presence of other "
-"agents, but the less freedom this agent has in choosing its velocities. Must "
-"be positive."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the current velocity of the agent."
-msgstr "Legt den aktuell sichtbaren Rahmen der Textur fest."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Destroys the given RID."
-msgstr "Gibt den gegebenen Übergang zurück."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns all created navigation map [RID]s on the NavigationServer. This "
-"returns both 2D and 3D created navigation maps as there is technically no "
-"distinction between them."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid "Create a new map."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"This function immediately forces synchronization of the specified navigation "
-"[code]map[/code] [RID]. By default navigation maps are only synchronized at "
-"the end of each physics frame. This function can be used to immediately "
-"(re)calculate all the navigation meshes and region connections of the "
-"navigation map. This makes it possible to query a navigation path for a "
-"changed map immediately and in the same frame (multiple times if needed).\n"
-"Due to technical restrictions the current NavigationServer command queue "
-"will be flushed. This means all already queued update commands for this "
-"physics frame will be executed, even those intended for other maps, regions "
-"and agents not part of the specified map. The expensive computation of the "
-"navigation meshes and region connections of a map will only be done for the "
-"specified map. Other maps will receive the normal synchronization at the end "
-"of the physics frame. Should the specified map receive changes after the "
-"forced update it will update again as well when the other maps receive their "
-"update.\n"
-"Avoidance processing and dispatch of the [code]safe_velocity[/code] signals "
-"is untouched by this function and continues to happen for all maps and "
-"agents at the end of the physics frame.\n"
-"[b]Note:[/b] With great power comes great responsibility. This function "
-"should only be used by users that really know what they are doing and have a "
-"good reason for it. Forcing an immediate update of a navigation map requires "
-"locking the NavigationServer and flushing the entire NavigationServer "
-"command queue. Not only can this severely impact the performance of a game "
-"but it can also introduce bugs if used inappropriately without much "
-"foresight."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns all navigation agents [RID]s that are currently assigned to the "
-"requested navigation [code]map[/code]."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml
-#, fuzzy
-msgid "Returns the map cell height. [b]Note:[/b] Currently not implemented."
-msgstr ""
-"Gibt die aktuelle Zeile in der geöffneten Datei zurück (aktuell nicht "
-"implementiert)."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns the map cell size."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid ""
-"Returns the point closest to the provided [code]to_point[/code] on the "
-"navigation mesh surface."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns the owner region RID for the point returned by [method "
-"map_get_closest_point]."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml
-msgid ""
-"Returns the edge connection margin of the map. The edge connection margin is "
-"a distance used to connect two regions."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns the navigation path to reach the destination from the origin. "
-"[code]navigation_layers[/code] is a bitmask of all region layers that are "
-"allowed to be in the path."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns all navigation regions [RID]s that are currently assigned to the "
-"requested navigation [code]map[/code]."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if the map is active."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the map active."
-msgstr "Die letzte Aktion wiederholen."
-
-#: doc/classes/Navigation2DServer.xml
-msgid ""
-"Set the map cell height used to weld the navigation mesh polygons. [b]Note:[/"
-"b] Currently not implemented."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid "Set the map cell size used to weld the navigation mesh polygons."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Set the map edge connection margin used to weld the compatible region edges."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid "Creates a new region."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns the ending point of a connection door. [code]connection[/code] is an "
-"index between 0 and the return value of [method "
-"region_get_connections_count]."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns the starting point of a connection door. [code]connection[/code] is "
-"an index between 0 and the return value of [method "
-"region_get_connections_count]."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns how many connections this [code]region[/code] has with other regions "
-"in the map."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns the [code]enter_cost[/code] of this [code]region[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns the navigation map [RID] the requested [code]region[/code] is "
-"currently assigned to."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns the region's navigation layers."
-msgstr "Gibt die Anzahl der Verbindungen im Graphen zurück."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns the [code]travel_cost[/code] of this [code]region[/code]."
-msgstr "Logischer ODER-Operator ([code]oder[/code] oder [code]||[/code])."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-msgid ""
-"Returns [code]true[/code] if the provided [code]point[/code] in world space "
-"is currently owned by the provided navigation [code]region[/code]. Owned in "
-"this context means that one of the region's navigation mesh polygon faces "
-"has a possible position at the closest distance to this point compared to "
-"all other navigation meshes from other navigation regions that are also "
-"registered on the navigation map of the provided region.\n"
-"If multiple navigation meshes have positions at equal distance the "
-"navigation region whose polygons are processed first wins the ownership. "
-"Polygons are processed in the same order that navigation regions were "
-"registered on the NavigationServer.\n"
-"[b]Note:[/b] If navigation meshes from different navigation regions overlap "
-"(which should be avoided in general) the result might not be what is "
-"expected."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the [code]enter_cost[/code] for this [code]region[/code]."
-msgstr "Logischer ODER-Operator ([code]oder[/code] oder [code]||[/code])."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the map for the region."
-msgstr "Gibt die Größe des Arrays zurück."
-
-#: doc/classes/Navigation2DServer.xml
-msgid ""
-"Set the region's navigation layers. This allows selecting regions from a "
-"path request (when using [method Navigation2DServer.map_get_path])."
-msgstr ""
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the navigation mesh for the region."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the global transformation for the region."
-msgstr ""
-"Gibt zurück, ob die Knochenauflage für den Bone an [code]bone_idx[/code] "
-"deaktiviert ist."
-
-#: doc/classes/Navigation2DServer.xml doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the [code]travel_cost[/code] for this [code]region[/code]."
-msgstr "Logischer ODER-Operator ([code]oder[/code] oder [code]||[/code])."
-
-#: doc/classes/NavigationAgent.xml
-msgid "3D agent used in navigation for collision avoidance."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"3D agent that is used in navigation to reach a location while avoiding "
-"static and dynamic obstacles. The dynamic obstacles are avoided using RVO "
-"(Reciprocal Velocity Obstacles) collision avoidance. The agent needs "
-"navigation data to work correctly. By default this node will register to the "
-"default [World] navigation map. If this node is a child of a [Navigation] "
-"node it will register to the navigation map of the navigation node or the "
-"function [method set_navigation] can be used to set the navigation node "
-"directly. [NavigationAgent] is physics safe.\n"
-"[b]Note:[/b] After [method set_target_location] is used it is required to "
-"use the [method get_next_location] function once every physics frame to "
-"update the internal path logic of the NavigationAgent. The returned vector "
-"position from this function should be used as the next movement position for "
-"the agent's parent Node.\n"
-"[b]Note:[/b] By default, the expensive calculations for avoidance are done "
-"in a thread. In HTML5 exports without thread support, they will be done on "
-"the main thread, which can lead to performance issues."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns the distance to the target location, using the agent's global "
-"position. The user must set the target location with [method "
-"set_target_location] in order for this to be accurate."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns the reachable final location in global coordinates. This can change "
-"if the navigation path is altered in any way. Because of this, it would be "
-"best to check this each frame."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns this agent's current path from start to finish in global "
-"coordinates. The path only updates when the target location is changed or "
-"the agent requires a repath. The path array is not intended to be used in "
-"direct path movement as the agent has its own internal path logic that would "
-"get corrupted by changing the path array manually. Use the intended [method "
-"get_next_location] once every physics frame to receive the next path point "
-"for the agents movement as this function also updates the internal path "
-"logic."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-#, fuzzy
-msgid ""
-"Returns which index the agent is currently on in the navigation path's "
-"[PoolVector3Array]."
-msgstr "Liefert die Fläche des [Rect2i]."
-
-#: doc/classes/NavigationAgent.xml
-#, fuzzy
-msgid ""
-"Returns the [Navigation] node that the agent is using for its navigation "
-"system."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns the [RID] of the navigation map for this NavigationAgent node. This "
-"function returns always the map set on the NavigationAgent node and not the "
-"map of the abstract agent on the NavigationServer. If the agent map is "
-"changed directly with the NavigationServer API the NavigationAgent node will "
-"not be aware of the map change. Use [method set_navigation_map] to change "
-"the navigation map for the NavigationAgent and also update the agent on the "
-"NavigationServer."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns the next location in global coordinates that can be moved to, making "
-"sure that there are no static objects in the way. If the agent does not have "
-"a navigation path, it will return the position of the agent's parent. The "
-"use of this function once every physics frame is required to update the "
-"internal path logic of the NavigationAgent."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-#, fuzzy
-msgid "Returns the [RID] of this agent on the [NavigationServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns the user-defined target location (set with [method "
-"set_target_location])."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the navigation path's final location has been "
-"reached."
-msgstr "Gibt [code]true[/code] zurück, ob ein gegebener Pfad gefiltert ist."
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the target location is reachable. The target "
-"location is set using [method set_target_location]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die spezifizerte Flagge aktiviert ist. "
-"Siehe die [enum Flags] Aufzählung für Optionen."
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Returns [code]true[/code] if the target location is reached. The target "
-"location is set using [method set_target_location]. It may not always be "
-"possible to reach the target location. It should always be possible to reach "
-"the final location though. See [method get_final_location]."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"Sets the [Navigation] node used by the agent. Useful when you don't want to "
-"make the agent a child of a [Navigation] node."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Sets the [RID] of the navigation map this NavigationAgent node should use "
-"and also updates the [code]agent[/code] on the NavigationServer."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Sets the user desired final location. This will clear the current navigation "
-"path."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Sends the passed in velocity to the collision avoidance algorithm. It will "
-"adjust the velocity to avoid collisions. Once the adjustment to the velocity "
-"is complete, it will emit the [signal velocity_computed] signal."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"The NavigationAgent height offset is subtracted from the y-axis value of any "
-"vector path position for this NavigationAgent. The NavigationAgent height "
-"offset does not change or influence the navigation mesh or pathfinding query "
-"result. Additional navigation maps that use regions with navigation meshes "
-"that the developer baked with appropriate agent radius or height values are "
-"required to support different-sized agents."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"If [code]true[/code] the agent is registered for an RVO avoidance callback "
-"on the [NavigationServer]. When [method set_velocity] is used and the "
-"processing is completed a [code]safe_velocity[/code] Vector3 is received "
-"with a signal connection to [signal velocity_computed]. Avoidance processing "
-"with many registered agents has a significant performance cost and should "
-"only be enabled on agents that currently require it."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"Ignores collisions on the Y axis. Must be [code]true[/code] to move on a "
-"horizontal plane."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid "The maximum number of neighbors for the agent to consider."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid "The maximum speed that an agent can move."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"A bitfield determining all navigation map layers the [NavigationAgent] "
-"belongs to. On path requests the agent will ignore navmeshes without at "
-"least one matching layer."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid "The distance to search for other agents."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"The distance threshold before a path point is considered to be reached. This "
-"will allow an agent to not have to hit a path point on the path exactly, but "
-"in the area. If this value is set to high the NavigationAgent will skip "
-"points on the path which can lead to leaving the navigation mesh. If this "
-"value is set to low the NavigationAgent will be stuck in a repath loop cause "
-"it will constantly overshoot or undershoot the distance to the next point on "
-"each physics frame update."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"The maximum distance the agent is allowed away from the ideal path to the "
-"final location. This can happen due to trying to avoid collisions. When the "
-"maximum distance is exceeded, it recalculates the ideal path."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml
-msgid ""
-"The radius of the avoidance agent. This is the \"body\" of the avoidance "
-"agent and not the avoidance maneuver starting radius (which is controlled by "
-"[member neighbor_dist]).\n"
-"Does not affect normal pathfinding. To change an actor's pathfinding radius "
-"bake [NavigationMesh] resources with a different [member NavigationMesh."
-"agent_radius] property and use different navigation maps for each actor size."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"The distance threshold before the final target point is considered to be "
-"reached. This will allow an agent to not have to hit the point of the final "
-"target exactly, but only the area. If this value is set to low the "
-"NavigationAgent will be stuck in a repath loop cause it will constantly "
-"overshoot or undershoot the distance to the final target point on each "
-"physics frame update."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"The minimal amount of time for which this agent's velocities, that are "
-"computed with the collision avoidance algorithm, are safe with respect to "
-"other agents. The larger the number, the sooner the agent will respond to "
-"other agents, but the less freedom in choosing its velocities. Must be "
-"positive."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-#, fuzzy
-msgid "Notifies when the final location is reached."
-msgstr "Benachrichtigt, wenn die Wiedergabe einer Animation beendet ist."
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Notifies when the navigation path changes. This can be triggered by the "
-"navigation system or by the user changing the path."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Notifies when the player-defined target, set with [method "
-"set_target_location], is reached."
-msgstr ""
-
-#: doc/classes/NavigationAgent.xml doc/classes/NavigationAgent2D.xml
-msgid ""
-"Notifies when the collision avoidance velocity is calculated after a call to "
-"[method set_velocity]. Only emitted when [member avoidance_enabled] is true."
-msgstr ""
-
-#: doc/classes/NavigationAgent2D.xml
-msgid "2D agent used in navigation for collision avoidance."
-msgstr ""
-
-#: doc/classes/NavigationAgent2D.xml
-msgid ""
-"2D agent that is used in navigation to reach a location while avoiding "
-"static and dynamic obstacles. The dynamic obstacles are avoided using RVO "
-"(Reciprocal Velocity Obstacles) collision avoidance. The agent needs "
-"navigation data to work correctly. By default this node will register to the "
-"default [World2D] navigation map. If this node is a child of a "
-"[Navigation2D] node it will register to the navigation map of the navigation "
-"node or the function [method set_navigation] can be used to set the "
-"navigation node directly. [NavigationAgent2D] is physics safe.\n"
-"[b]Note:[/b] After [method set_target_location] is used it is required to "
-"use the [method get_next_location] function once every physics frame to "
-"update the internal path logic of the NavigationAgent. The returned vector "
-"position from this function should be used as the next movement position for "
-"the agent's parent Node.\n"
-"[b]Note:[/b] By default, the expensive calculations for avoidance are done "
-"in a thread. In HTML5 exports without thread support, they will be done on "
-"the main thread, which can lead to performance issues."
-msgstr ""
-
-#: doc/classes/NavigationAgent2D.xml
-#, fuzzy
-msgid ""
-"Returns which index the agent is currently on in the navigation path's "
-"[PoolVector2Array]."
-msgstr "Liefert die Fläche des [Rect2i]."
-
-#: doc/classes/NavigationAgent2D.xml
-#, fuzzy
-msgid ""
-"Returns the [Navigation2D] node that the agent is using for its navigation "
-"system."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/NavigationAgent2D.xml
-#, fuzzy
-msgid "Returns the [RID] of this agent on the [Navigation2DServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/NavigationAgent2D.xml
-msgid ""
-"Sets the [Navigation2D] node used by the agent. Useful when you don't want "
-"to make the agent a child of a [Navigation2D] node."
-msgstr ""
-
-#: doc/classes/NavigationAgent2D.xml
-msgid ""
-"If [code]true[/code] the agent is registered for an RVO avoidance callback "
-"on the [Navigation2DServer]. When [method set_velocity] is used and the "
-"processing is completed a [code]safe_velocity[/code] Vector2 is received "
-"with a signal connection to [signal velocity_computed]. Avoidance processing "
-"with many registered agents has a significant performance cost and should "
-"only be enabled on agents that currently require it."
-msgstr ""
-
-#: doc/classes/NavigationAgent2D.xml
-msgid ""
-"A bitfield determining all navigation map layers the [NavigationAgent2D] "
-"belongs to. On path requests the agent will ignore navmeshes without at "
-"least one matching layer."
-msgstr ""
-
-#: doc/classes/NavigationAgent2D.xml
-msgid ""
-"The radius of the avoidance agent. This is the \"body\" of the avoidance "
-"agent and not the avoidance maneuver starting radius (which is controlled by "
-"[member neighbor_dist]).\n"
-"Does not affect normal pathfinding."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid "A mesh to approximate the walkable areas and obstacles."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"A navigation mesh is a collection of polygons that define which areas of an "
-"environment are traversable to aid agents in pathfinding through complicated "
-"spaces."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml doc/classes/NavigationPolygon.xml
-msgid ""
-"Adds a polygon using the indices of the vertices you get when calling "
-"[method get_vertices]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Clears the array of polygons, but it doesn't clear the array of vertices."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Initializes the navigation mesh by setting the vertices and indices "
-"according to a [Mesh]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid ""
-"Returns whether the specified [code]bit[/code] of the [member "
-"geometry_collision_mask] is set."
-msgstr "Gibt das Unternodemit dem angegebenen [code]Namen[/code] zurück."
-
-#: doc/classes/NavigationMesh.xml doc/classes/NavigationPolygon.xml
-msgid ""
-"Returns a [PoolIntArray] containing the indices of the vertices of a created "
-"polygon."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid "Returns the number of polygons in the navigation mesh."
-msgstr "Gibt die Anzahl der Verbindungen im Graphen zurück."
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Returns a [PoolVector3Array] containing all the vertices being used to "
-"create the polygons."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"If [code]value[/code] is [code]true[/code], sets the specified [code]bit[/"
-"code] in the [member geometry_collision_mask].\n"
-"If [code]value[/code] is [code]false[/code], clears the specified [code]bit[/"
-"code] in the [member geometry_collision_mask]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml doc/classes/NavigationPolygon.xml
-msgid ""
-"Sets the vertices that can be then indexed to create polygons with the "
-"[method add_polygon] method."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The minimum floor to ceiling height that will still allow the floor area to "
-"be considered walkable.\n"
-"[b]Note:[/b] While baking, this value will be rounded up to the nearest "
-"multiple of [member cell_height]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The minimum ledge height that is considered to still be traversable.\n"
-"[b]Note:[/b] While baking, this value will be rounded down to the nearest "
-"multiple of [member cell_height]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid "The maximum slope that is considered walkable, in degrees."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The distance to erode/shrink the walkable area of the heightfield away from "
-"obstructions.\n"
-"[b]Note:[/b] While baking, this value will be rounded up to the nearest "
-"multiple of [member cell_size]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid "The Y axis cell size to use for fields."
-msgstr "Der Anrufmodus, der für Spuren der Anrufmethode verwendet werden soll."
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The sampling distance to use when generating the detail mesh, in cell unit."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The maximum distance the detail mesh surface should deviate from "
-"heightfield, in cell unit."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The maximum distance a simplfied contour's border edges should deviate the "
-"original raw contour."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The maximum allowed length for contour edges along the border of the mesh.\n"
-"[b]Note:[/b] While baking, this value will be rounded up to the nearest "
-"multiple of [member cell_size]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"If the baking [AABB] has a volume the navigation mesh baking will be "
-"restricted to its enclosing area."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid "The position offset applied to the [member filter_baking_aabb] [AABB]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid "If [code]true[/code], marks spans that are ledges as non-walkable."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"If [code]true[/code], marks non-walkable spans as walkable if their maximum "
-"is within [member agent_max_climb] of a walkable neighbor."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], marks walkable spans as not walkable if the clearance "
-"above the span is less than [member agent_height]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The physics layers to scan for static colliders.\n"
-"Only used when [member geometry_parsed_geometry_type] is [constant "
-"PARSED_GEOMETRY_STATIC_COLLIDERS] or [constant PARSED_GEOMETRY_BOTH]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Determines which type of nodes will be parsed as geometry. See [enum "
-"ParsedGeometryType] for possible values."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The source of the geometry used when baking. See [enum SourceGeometryMode] "
-"for possible values."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The name of the group to scan for geometry.\n"
-"Only used when [member geometry_source_geometry_mode] is [constant "
-"SOURCE_GEOMETRY_GROUPS_WITH_CHILDREN] or [constant "
-"SOURCE_GEOMETRY_GROUPS_EXPLICIT]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The maximum number of vertices allowed for polygons generated during the "
-"contour to polygon conversion process."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Any regions with a size smaller than this will be merged with larger regions "
-"if possible.\n"
-"[b]Note:[/b] This value will be squared to calculate the number of cells. "
-"For example, a value of 20 will set the number of cells to 400."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"The minimum size of a region for it to be created.\n"
-"[b]Note:[/b] This value will be squared to calculate the minimum number of "
-"cells allowed to form isolated island areas. For example, a value of 8 will "
-"set the number of cells to 64."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Partitioning algorithm for creating the navigation mesh polys. See [enum "
-"SamplePartitionType] for possible values."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Watershed partitioning. Generally the best choice if you precompute the "
-"navigation mesh, use this if you have large open areas."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Monotone partitioning. Use this if you want fast navigation mesh generation."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Layer partitioning. Good choice to use for tiled navigation mesh with medium "
-"and small sized tiles."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid "Represents the size of the [enum SamplePartitionType] enum."
-msgstr "Stellt die Größe dar des [enum Variant.Type] enum."
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Parses mesh instances as geometry. This includes [MeshInstance], [CSGShape], "
-"and [GridMap] nodes."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Parses [StaticBody] colliders as geometry. The collider should be in any of "
-"the layers specified by [member geometry_collision_mask]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Both [constant PARSED_GEOMETRY_MESH_INSTANCES] and [constant "
-"PARSED_GEOMETRY_STATIC_COLLIDERS]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid "Represents the size of the [enum ParsedGeometryType] enum."
-msgstr "Stellt die Größe dar des [enum Variant.Type] enum."
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Scans the child nodes of [NavigationMeshInstance] recursively for geometry."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Scans nodes in a group and their child nodes recursively for geometry. The "
-"group is specified by [member geometry_source_group_name]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-msgid ""
-"Uses nodes in a group for geometry. The group is specified by [member "
-"geometry_source_group_name]."
-msgstr ""
-
-#: doc/classes/NavigationMesh.xml
-#, fuzzy
-msgid "Represents the size of the [enum SourceGeometryMode] enum."
-msgstr "Steht für die Größe von [enum TextureRepeat] enum."
-
-#: doc/classes/NavigationMeshGenerator.xml
-msgid "Helper class for creating and clearing navigation meshes."
-msgstr ""
-
-#: doc/classes/NavigationMeshGenerator.xml
-msgid ""
-"This class is responsible for creating and clearing 3D navigation meshes "
-"used as [NavigationMesh] resources inside [NavigationMeshInstance]. The "
-"[NavigationMeshGenerator] has very limited to no use for 2D as the "
-"navigation mesh baking process expects 3D node types and 3D source geometry "
-"to parse.\n"
-"The entire navigation mesh baking is best done in a separate thread as the "
-"voxelization, collision tests and mesh optimization steps involved are very "
-"performance and time hungry operations.\n"
-"Navigation mesh baking happens in multiple steps and the result depends on "
-"3D source geometry and properties of the [NavigationMesh] resource. In the "
-"first step, starting from a root node and depending on [NavigationMesh] "
-"properties all valid 3D source geometry nodes are collected from the "
-"[SceneTree]. Second, all collected nodes are parsed for their relevant 3D "
-"geometry data and a combined 3D mesh is build. Due to the many different "
-"types of parsable objects, from normal [MeshInstance]s to [CSGShape]s or "
-"various [CollisionObject]s, some operations to collect geometry data can "
-"trigger [VisualServer] and [PhysicsServer] synchronizations. Server "
-"synchronization can have a negative effect on baking time or framerate as it "
-"often involves [Mutex] locking for thread security. Many parsable objects "
-"and the continuous synchronization with other threaded Servers can increase "
-"the baking time significantly. On the other hand only a few but very large "
-"and complex objects will take some time to prepare for the Servers which can "
-"noticeably stall the next frame render. As a general rule the total amount "
-"of parsable objects and their individual size and complexity should be "
-"balanced to avoid framerate issues or very long baking times. The combined "
-"mesh is then passed to the Recast Navigation Object to test the source "
-"geometry for walkable terrain suitable to [NavigationMesh] agent properties "
-"by creating a voxel world around the meshes bounding area.\n"
-"The finalized navigation mesh is then returned and stored inside the "
-"[NavigationMesh] for use as a resource inside [NavigationMeshInstance] "
-"nodes.\n"
-"[b]Note:[/b] Using meshes to not only define walkable surfaces but also "
-"obstruct navigation baking does not always work. The navigation baking has "
-"no concept of what is a geometry \"inside\" when dealing with mesh source "
-"geometry and this is intentional. Depending on current baking parameters, as "
-"soon as the obstructing mesh is large enough to fit a navigation mesh area "
-"inside, the baking will generate navigation mesh areas that are inside the "
-"obstructing source geometry mesh."
-msgstr ""
-
-#: doc/classes/NavigationMeshGenerator.xml
-msgid ""
-"Bakes navigation data to the provided [code]nav_mesh[/code] by parsing child "
-"nodes under the provided [code]root_node[/code] or a specific group of nodes "
-"for potential source geometry. The parse behavior can be controlled with the "
-"[member NavigationMesh.geometry_parsed_geometry_type] and [member "
-"NavigationMesh.geometry_source_geometry_mode] properties on the "
-"[NavigationMesh] resource."
-msgstr ""
-
-#: doc/classes/NavigationMeshGenerator.xml
-#, fuzzy
-msgid ""
-"Removes all polygons and vertices from the provided [code]nav_mesh[/code] "
-"resource."
-msgstr "Entfernt die Animation mit dem key [code]name[/code]."
-
-#: doc/classes/NavigationMeshInstance.xml
-msgid "An instance of a [NavigationMesh]."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-msgid ""
-"An instance of a [NavigationMesh]. It tells the [Navigation] node what can "
-"be navigated and what cannot, based on the [NavigationMesh] resource.\n"
-"By default this node will register to the default [World] navigation map. If "
-"this node is a child of a [Navigation] node it will register to the "
-"navigation map of the navigation node.\n"
-"Two regions can be connected to each other if they share a similar edge. You "
-"can set the minimum distance between two vertices required to connect two "
-"edges by using [method NavigationServer.map_set_edge_connection_margin].\n"
-"[b]Note:[/b] Overlapping two regions' navmeshes is not enough for connecting "
-"two regions. They must share a similar edge.\n"
-"The cost of entering this region from another region can be controlled with "
-"the [member enter_cost] value.\n"
-"[b]Note:[/b] This value is not added to the path cost when the start "
-"position is already inside this region.\n"
-"The cost of traveling distances inside this region can be controlled with "
-"the [member travel_cost] multiplier."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-msgid ""
-"Bakes the [NavigationMesh]. If [code]on_thread[/code] is set to [code]true[/"
-"code] (default), the baking is done on a separate thread. Baking on separate "
-"thread is useful because navigation baking is not a cheap operation. When it "
-"is completed, it automatically sets the new [NavigationMesh]. Please note "
-"that baking on separate thread may be very slow if geometry is parsed from "
-"meshes as async access to each mesh involves heavy synchronization. Also, "
-"please note that baking on a separate thread is automatically disabled on "
-"operating systems that cannot use threads (such as HTML5 with threads "
-"disabled)."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-msgid ""
-"Returns the [RID] of this region on the [NavigationServer]. Combined with "
-"[method NavigationServer.map_get_closest_point_owner] can be used to "
-"identify the [NavigationMeshInstance] closest to a point on the merged "
-"navigation map."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-msgid "Determines if the [NavigationMeshInstance] is enabled or disabled."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-#: doc/classes/NavigationPolygonInstance.xml
-msgid ""
-"When pathfinding enters this region's navmesh from another regions navmesh "
-"the [code]enter_cost[/code] value is added to the path distance for "
-"determining the shortest path."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-msgid ""
-"A bitfield determining all navigation map layers the [NavigationMesh] "
-"belongs to. On path requests with [method NavigationServer.map_get_path] "
-"navmeshes without matching layers will be ignored and the navigation map "
-"will only proximity merge different navmeshes with matching layers."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-#, fuzzy
-msgid "The [NavigationMesh] resource to use."
-msgstr "Das [NavigationMeshGenerator] Singleton."
-
-#: doc/classes/NavigationMeshInstance.xml
-#: doc/classes/NavigationPolygonInstance.xml
-msgid ""
-"When pathfinding moves inside this region's navmesh the traveled distances "
-"are multiplied with [code]travel_cost[/code] for determining the shortest "
-"path."
-msgstr ""
-
-#: doc/classes/NavigationMeshInstance.xml
-#, fuzzy
-msgid "Notifies when the navigation mesh bake operation is completed."
-msgstr "Benachrichtigt, wenn eine Animation abgespielt wird."
-
-#: doc/classes/NavigationMeshInstance.xml
-#, fuzzy
-msgid "Notifies when the [NavigationMesh] has changed."
-msgstr "Benachrichtigt, wenn eine Animation abgespielt wird."
-
-#: doc/classes/NavigationObstacle.xml
-msgid "3D obstacle used in navigation for collision avoidance."
-msgstr ""
-
-#: doc/classes/NavigationObstacle.xml
-msgid ""
-"3D obstacle used in navigation for collision avoidance. The obstacle needs "
-"navigation data to work correctly. This can be done by having the obstacle "
-"as a child of a [Navigation] node, or using [method set_navigation]. "
-"[NavigationObstacle] is physics safe.\n"
-"[b]Note:[/b] Obstacles are intended as a last resort option for constantly "
-"moving objects that cannot be (re)baked to a navigation mesh efficiently."
-msgstr ""
-
-#: doc/classes/NavigationObstacle.xml
-#, fuzzy
-msgid ""
-"Returns the [Navigation] node that the obstacle is using for its navigation "
-"system."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/NavigationObstacle.xml
-#, fuzzy
-msgid "Returns the [RID] of this obstacle on the [NavigationServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/NavigationObstacle.xml
-msgid ""
-"Sets the [Navigation] node used by the obstacle. Useful when you don't want "
-"to make the obstacle a child of a [Navigation] node."
-msgstr ""
-
-#: doc/classes/NavigationObstacle.xml doc/classes/NavigationObstacle2D.xml
-msgid ""
-"Enables radius estimation algorithm which uses parent's collision shapes to "
-"determine the obstacle radius."
-msgstr ""
-
-#: doc/classes/NavigationObstacle.xml doc/classes/NavigationObstacle2D.xml
-msgid ""
-"The radius of the agent. Used only if [member estimate_radius] is set to "
-"[code]false[/code]."
-msgstr ""
-
-#: doc/classes/NavigationObstacle2D.xml
-msgid "2D obstacle used in navigation for collision avoidance."
-msgstr ""
-
-#: doc/classes/NavigationObstacle2D.xml
-msgid ""
-"2D obstacle used in navigation for collision avoidance. The obstacle needs "
-"navigation data to work correctly. This can be done by having the obstacle "
-"as a child of a [Navigation2D] node, or using [method set_navigation]. "
-"[NavigationObstacle2D] is physics safe.\n"
-"[b]Note:[/b] Obstacles are intended as a last resort option for constantly "
-"moving objects that cannot be (re)baked to a navigation mesh efficiently."
-msgstr ""
-
-#: doc/classes/NavigationObstacle2D.xml
-msgid ""
-"Returns the [Navigation2D] node that the obstacle is using for its "
-"navigation system."
-msgstr ""
-
-#: doc/classes/NavigationObstacle2D.xml
-#, fuzzy
-msgid "Returns the [RID] of this obstacle on the [Navigation2DServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/NavigationObstacle2D.xml
-msgid ""
-"Sets the [Navigation2D] node used by the obstacle. Useful when you don't "
-"want to make the obstacle a child of a [Navigation2D] node."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"A node that has methods to draw outlines or use indices of vertices to "
-"create navigation polygons."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"There are two ways to create polygons. Either by using the [method "
-"add_outline] method, or using the [method add_polygon] method.\n"
-"Using [method add_outline]:\n"
-"[codeblock]\n"
-"var polygon = NavigationPolygon.new()\n"
-"var outline = PoolVector2Array([Vector2(0, 0), Vector2(0, 50), Vector2(50, "
-"50), Vector2(50, 0)])\n"
-"polygon.add_outline(outline)\n"
-"polygon.make_polygons_from_outlines()\n"
-"$NavigationPolygonInstance.navpoly = polygon\n"
-"[/codeblock]\n"
-"Using [method add_polygon] and indices of the vertices array.\n"
-"[codeblock]\n"
-"var polygon = NavigationPolygon.new()\n"
-"var vertices = PoolVector2Array([Vector2(0, 0), Vector2(0, 50), Vector2(50, "
-"50), Vector2(50, 0)])\n"
-"polygon.set_vertices(vertices)\n"
-"var indices = PoolIntArray([0, 1, 2, 3])\n"
-"polygon.add_polygon(indices)\n"
-"$NavigationPolygonInstance.navpoly = polygon\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Appends a [PoolVector2Array] that contains the vertices of an outline to the "
-"internal array that contains all the outlines. You have to call [method "
-"make_polygons_from_outlines] in order for this array to be converted to "
-"polygons that the engine will use."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Adds a [PoolVector2Array] that contains the vertices of an outline to the "
-"internal array that contains all the outlines at a fixed position. You have "
-"to call [method make_polygons_from_outlines] in order for this array to be "
-"converted to polygons that the engine will use."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Clears the array of the outlines, but it doesn't clear the vertices and the "
-"polygons that were created by them."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Clears the array of polygons, but it doesn't clear the array of outlines and "
-"vertices."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Returns the [NavigationMesh] resulting from this navigation polygon. This "
-"navmesh can be used to update the navmesh of a region with the [method "
-"NavigationServer.region_set_navmesh] API directly (as 2D uses the 3D server "
-"behind the scene)."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Returns a [PoolVector2Array] containing the vertices of an outline that was "
-"created in the editor or by script."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Returns the number of outlines that were created in the editor or by script."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid "Returns the count of all polygons."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Returns a [PoolVector2Array] containing all the vertices being used to "
-"create the polygons."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid "Creates polygons from the outlines added in the editor or by script."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Removes an outline created in the editor or by script. You have to call "
-"[method make_polygons_from_outlines] for the polygons to update."
-msgstr ""
-
-#: doc/classes/NavigationPolygon.xml
-msgid ""
-"Changes an outline created in the editor or by script. You have to call "
-"[method make_polygons_from_outlines] for the polygons to update."
-msgstr ""
-
-#: doc/classes/NavigationPolygonInstance.xml
-msgid "A region of the 2D navigation map."
-msgstr ""
-
-#: doc/classes/NavigationPolygonInstance.xml
-msgid ""
-"A region of the navigation map. It tells the [Navigation2DServer] what can "
-"be navigated and what cannot, based on its [NavigationPolygon] resource.\n"
-"By default this node will register to the default [World2D] navigation map. "
-"If this node is a child of a [Navigation2D] node it will register to the "
-"navigation map of the navigation node.\n"
-"Two regions can be connected to each other if they share a similar edge. You "
-"can set the minimum distance between two vertices required to connect two "
-"edges by using [method Navigation2DServer.map_set_edge_connection_margin].\n"
-"[b]Note:[/b] Overlapping two regions' polygons is not enough for connecting "
-"two regions. They must share a similar edge.\n"
-"The pathfinding cost of entering this region from another region can be "
-"controlled with the [member enter_cost] value.\n"
-"[b]Note:[/b] This value is not added to the path cost when the start "
-"position is already inside this region.\n"
-"The pathfinding cost of traveling distances inside this region can be "
-"controlled with the [member travel_cost] multiplier."
-msgstr ""
-
-#: doc/classes/NavigationPolygonInstance.xml
-msgid ""
-"Returns the [RID] of this region on the [Navigation2DServer]. Combined with "
-"[method Navigation2DServer.map_get_closest_point_owner] can be used to "
-"identify the [NavigationPolygonInstance] closest to a point on the merged "
-"navigation map."
-msgstr ""
-
-#: doc/classes/NavigationPolygonInstance.xml
-msgid "Determines if the [NavigationPolygonInstance] is enabled or disabled."
-msgstr ""
-
-#: doc/classes/NavigationPolygonInstance.xml
-msgid ""
-"A bitfield determining all navigation map layers the [NavigationPolygon] "
-"belongs to. On path requests with [method Navigation2DServer.map_get_path] "
-"navmeshes without matching layers will be ignored and the navigation map "
-"will only proximity merge different navmeshes with matching layers."
-msgstr ""
-
-#: doc/classes/NavigationPolygonInstance.xml
-#, fuzzy
-msgid "The [NavigationPolygon] resource to use."
-msgstr "Das [NavigationMeshGenerator] Singleton."
-
-#: doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Server interface for low-level 3D navigation access."
-msgstr "Schnittstelle zu AES-Verschlüsselungsfunktionen auf niedriger Ebene."
-
-#: doc/classes/NavigationServer.xml
-msgid ""
-"NavigationServer is the server responsible for all 3D navigation. It handles "
-"several objects, namely maps, regions and agents.\n"
-"Maps are made up of regions, which are made of navigation meshes. Together, "
-"they define the navigable areas in the 3D world.\n"
-"[b]Note:[/b] Most NavigationServer changes take effect after the next "
-"physics frame and not immediately. This includes all changes made to maps, "
-"regions or agents by navigation related Nodes in the SceneTree or made "
-"through scripts.\n"
-"For two regions to be connected to each other, they must share a similar "
-"edge. An edge is considered connected to another if both of its two vertices "
-"are at a distance less than [member Navigation.edge_connection_margin] to "
-"the respective other edge's vertex.\n"
-"To use the collision avoidance system, you may use agents. You can set an "
-"agent's target velocity, then the servers will emit a callback with a "
-"modified velocity.\n"
-"[b]Note:[/b] The collision avoidance system ignores regions. Using the "
-"modified velocity as-is might lead to pushing and agent outside of a "
-"navigable area. This is a limitation of the collision avoidance system, any "
-"more complex situation may require the use of the physics engine.\n"
-"[b]Note:[/b] By default, the expensive calculations for avoidance are done "
-"in a thread. In HTML5 exports without thread support, they will be done on "
-"the main thread, which can lead to performance issues.\n"
-"This server keeps tracks of any call and executes them during the sync "
-"phase. This means that you can request any change to the map, using any "
-"thread, without worrying."
-msgstr ""
-
-#: doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns the map cell height."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/NavigationServer.xml
-#, fuzzy
-msgid ""
-"Returns the normal for the point returned by [method map_get_closest_point]."
-msgstr "Gibt die inverse Quadratwurzel des Parameters zurück."
-
-#: doc/classes/NavigationServer.xml
-#, fuzzy
-msgid ""
-"Returns the closest point between the navigation surface and the segment."
-msgstr "Gibt den Namen der nächsten Animation in der Warteschlange zurück."
-
-#: doc/classes/NavigationServer.xml
-msgid ""
-"Returns the edge connection margin of the map. This distance is the minimum "
-"vertex distance needed to connect two edges from different regions."
-msgstr ""
-
-#: doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Returns the map's up direction."
-msgstr "Gibt das letzte Node des Graphen zurück."
-
-#: doc/classes/NavigationServer.xml
-msgid "Set the map cell height used to weld the navigation mesh polygons."
-msgstr ""
-
-#: doc/classes/NavigationServer.xml
-#, fuzzy
-msgid "Sets the map up direction."
-msgstr "Beendet die Tonausgabe."
-
-#: doc/classes/NavigationServer.xml
-msgid ""
-"Process the collision avoidance agents.\n"
-"The result of this process is needed by the physics server, so this must be "
-"called in the main thread.\n"
-"[b]Note:[/b] This function is not thread safe."
-msgstr ""
-
-#: doc/classes/NavigationServer.xml
-msgid "Bakes the navigation mesh."
-msgstr ""
-
-#: doc/classes/NavigationServer.xml
-msgid ""
-"Set the region's navigation layers. This allows selecting regions from a "
-"path request (when using [method NavigationServer.map_get_path])."
-msgstr ""
-
-#: doc/classes/NavigationServer.xml
-msgid "Control activation of this server."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-msgid ""
-"A [NetworkedMultiplayerPeer] implementation that can be controlled from a "
-"script."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-msgid ""
-"A [NetworkedMultiplayerPeer] implementation that can be used as a [member "
-"MultiplayerAPI.network_peer] and controlled from a script.\n"
-"Its purpose is to allow adding a new backend for the high-Level multiplayer "
-"API without needing to use GDNative."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-msgid ""
-"Deliver a packet to the local [MultiplayerAPI].\n"
-"When your script receives a packet from other peers over the network "
-"(originating from the [signal packet_generated] signal on the sending peer), "
-"passing it to this method will deliver it locally."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-msgid ""
-"Initialize the peer with the given [code]peer_id[/code] (must be between 1 "
-"and 2147483647).\n"
-"Can only be called if the connection status is [constant "
-"NetworkedMultiplayerPeer.CONNECTION_CONNECTING]. See [method "
-"set_connection_status]."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-msgid ""
-"Set the state of the connection. See [enum NetworkedMultiplayerPeer."
-"ConnectionStatus].\n"
-"This will emit the [signal NetworkedMultiplayerPeer.connection_succeeded], "
-"[signal NetworkedMultiplayerPeer.connection_failed] or [signal "
-"NetworkedMultiplayerPeer.server_disconnected] signals depending on the "
-"status and if the peer has the unique network id of [code]1[/code].\n"
-"You can only change to [constant NetworkedMultiplayerPeer."
-"CONNECTION_CONNECTING] from [constant NetworkedMultiplayerPeer."
-"CONNECTION_DISCONNECTED] and to [constant NetworkedMultiplayerPeer."
-"CONNECTION_CONNECTED] from [constant NetworkedMultiplayerPeer."
-"CONNECTION_CONNECTING]."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-#, fuzzy
-msgid "Set the max packet size that this peer can handle."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/NetworkedMultiplayerCustom.xml
-msgid ""
-"Emitted when the local [MultiplayerAPI] generates a packet.\n"
-"Your script should take this packet and send it to the requested peer over "
-"the network (which should call [method deliver_packet] with the data when "
-"it's received)."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"PacketPeer implementation using the [url=http://enet.bespin.org/index."
-"html]ENet[/url] library."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"A PacketPeer implementation that should be passed to [member SceneTree."
-"network_peer] after being initialized as either a client or server. Events "
-"can then be handled by connecting to [SceneTree] signals.\n"
-"ENet's purpose is to provide a relatively thin, simple and robust network "
-"communication layer on top of UDP (User Datagram Protocol).\n"
-"[b]Note:[/b] ENet only uses UDP, not TCP. When forwarding the server port to "
-"make your server accessible on the public Internet, you only need to forward "
-"the server port in UDP. You can use the [UPNP] class to try to forward the "
-"server port automatically when starting the server."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Closes the connection. Ignored if no connection is currently established. If "
-"this is a server it tries to notify all clients before forcibly "
-"disconnecting them. If this is a client it simply closes the connection to "
-"the server."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Create client that connects to a server at [code]address[/code] using "
-"specified [code]port[/code]. The given address needs to be either a fully "
-"qualified domain name (e.g. [code]\"www.example.com\"[/code]) or an IP "
-"address in IPv4 or IPv6 format (e.g. [code]\"192.168.1.1\"[/code]). The "
-"[code]port[/code] is the port the server is listening on. The "
-"[code]in_bandwidth[/code] and [code]out_bandwidth[/code] parameters can be "
-"used to limit the incoming and outgoing bandwidth to the given number of "
-"bytes per second. The default of 0 means unlimited bandwidth. Note that ENet "
-"will strategically drop packets on specific sides of a connection between "
-"peers to ensure the peer's bandwidth is not overwhelmed. The bandwidth "
-"parameters also determine the window size of a connection which limits the "
-"amount of reliable packets that may be in transit at any given time. Returns "
-"[constant OK] if a client was created, [constant ERR_ALREADY_IN_USE] if this "
-"NetworkedMultiplayerENet instance already has an open connection (in which "
-"case you need to call [method close_connection] first) or [constant "
-"ERR_CANT_CREATE] if the client could not be created. If [code]client_port[/"
-"code] is specified, the client will also listen to the given port; this is "
-"useful for some NAT traversal techniques."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Create server that listens to connections via [code]port[/code]. The port "
-"needs to be an available, unused port between 0 and 65535. Note that ports "
-"below 1024 are privileged and may require elevated permissions depending on "
-"the platform. To change the interface the server listens on, use [method "
-"set_bind_ip]. The default IP is the wildcard [code]\"*\"[/code], which "
-"listens on all available interfaces. [code]max_clients[/code] is the maximum "
-"number of clients that are allowed at once, any number up to 4095 may be "
-"used, although the achievable number of simultaneous clients may be far "
-"lower and depends on the application. For additional details on the "
-"bandwidth parameters, see [method create_client]. Returns [constant OK] if a "
-"server was created, [constant ERR_ALREADY_IN_USE] if this "
-"NetworkedMultiplayerENet instance already has an open connection (in which "
-"case you need to call [method close_connection] first) or [constant "
-"ERR_CANT_CREATE] if the server could not be created."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Disconnect the given peer. If \"now\" is set to [code]true[/code], the "
-"connection will be closed immediately without flushing queued messages."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Returns the channel of the last packet fetched via [method PacketPeer."
-"get_packet]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Returns the channel of the next packet that will be retrieved via [method "
-"PacketPeer.get_packet]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid "Returns the IP address of the given peer."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid "Returns the remote port of the given peer."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"The IP used when creating a server. This is set to the wildcard [code]\"*\"[/"
-"code] by default, which binds to all available interfaces. The given IP "
-"needs to be in IPv4 or IPv6 address format, for example: "
-"[code]\"192.168.1.1\"[/code]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Configure the [X509Certificate] to use when [member use_dtls] is [code]true[/"
-"code]. For servers, you must also setup the [CryptoKey] via [method "
-"set_dtls_key]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Configure the [CryptoKey] to use when [member use_dtls] is [code]true[/"
-"code]. Remember to also call [method set_dtls_certificate] to setup your "
-"[X509Certificate]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Sets the timeout parameters for a peer.The timeout parameters control how "
-"and when a peer will timeout from a failure to acknowledge reliable traffic. "
-"Timeout values are expressed in milliseconds.\n"
-"The [code]timeout_limit[/code] is a factor that, multiplied by a value based "
-"on the average round trip time, will determine the timeout limit for a "
-"reliable packet. When that limit is reached, the timeout will be doubled, "
-"and the peer will be disconnected if that limit has reached "
-"[code]timeout_min[/code]. The [code]timeout_max[/code] parameter, on the "
-"other hand, defines a fixed timeout for which any packet must be "
-"acknowledged or the peer will be dropped."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Enforce ordered packets when using [constant NetworkedMultiplayerPeer."
-"TRANSFER_MODE_UNRELIABLE] (thus behaving similarly to [constant "
-"NetworkedMultiplayerPeer.TRANSFER_MODE_UNRELIABLE_ORDERED]). This is the "
-"only way to use ordering with the RPC system."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"The number of channels to be used by ENet. Channels are used to separate "
-"different kinds of data. In reliable or ordered mode, for example, the "
-"packet delivery order is ensured on a per-channel basis. This is done to "
-"combat latency and reduces ordering restrictions on packets. The delivery "
-"status of a packet in one channel won't stall the delivery of other packets "
-"in another channel."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"The compression method used for network packets. These have different "
-"tradeoffs of compression speed versus bandwidth, you may need to test which "
-"one works best for your use case if you use compression at all.\n"
-"[b]Note:[/b] Most games' network design involve sending many small packets "
-"frequently (smaller than 4 KB each). If in doubt, it is recommended to keep "
-"the default compression algorithm as it works best on these small packets.\n"
-"[b]Note:[/b] [member compression_mode] must be set to the same value on both "
-"the server and all its clients. Clients will fail to connect if the [member "
-"compression_mode] set on the client differs from the one set on the server. "
-"Prior to Godot 3.4, the default [member compression_mode] was [constant "
-"COMPRESS_NONE]. Nonetheless, mixing engine versions between clients and "
-"server is not recommended and not officially supported."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"The hostname used for DTLS verification, to be compared against the \"CN\" "
-"value in the certificate provided by the server.\n"
-"When set to an empty string, the [code]address[/code] parameter passed to "
-"[method create_client] is used instead."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Enable or disable certificate verification when [member use_dtls] is "
-"[code]true[/code]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Enable or disable the server feature that notifies clients of other peers' "
-"connection/disconnection, and relays messages between them. When this option "
-"is [code]false[/code], clients won't be automatically notified of other "
-"peers and won't be able to send them packets through the server."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"Set the default channel to be used to transfer data. By default, this value "
-"is [code]-1[/code] which means that ENet will only use 2 channels: one for "
-"reliable packets, and one for unreliable packets. The channel [code]0[/code] "
-"is reserved and cannot be used. Setting this member to any value between "
-"[code]0[/code] and [member channel_count] (excluded) will force ENet to use "
-"that channel for sending data. See [member channel_count] for more "
-"information about ENet channels."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"When enabled, the client or server created by this peer, will use "
-"[PacketPeerDTLS] instead of raw UDP sockets for communicating with the "
-"remote peer. This will make the communication encrypted with DTLS at the "
-"cost of higher resource usage and potentially larger packet size.\n"
-"[b]Note:[/b] When creating a DTLS server, make sure you setup the key/"
-"certificate pair via [method set_dtls_key] and [method "
-"set_dtls_certificate]. For DTLS clients, have a look at the [member "
-"dtls_verify] option, and configure the certificate accordingly via [method "
-"set_dtls_certificate]."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"No compression. This uses the most bandwidth, but has the upside of "
-"requiring the fewest CPU resources. This option may also be used to make "
-"network debugging using tools like Wireshark easier."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"ENet's built-in range encoding. Works well on small packets, but is not the "
-"most efficient algorithm on packets larger than 4 KB."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"[url=http://fastlz.org/]FastLZ[/url] compression. This option uses less CPU "
-"resources compared to [constant COMPRESS_ZLIB], at the expense of using more "
-"bandwidth."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid ""
-"[url=https://www.zlib.net/]Zlib[/url] compression. This option uses less "
-"bandwidth compared to [constant COMPRESS_FASTLZ], at the expense of using "
-"more CPU resources. Note that this algorithm is not very efficient on "
-"packets smaller than 4 KB. Therefore, it's recommended to use other "
-"compression algorithms in most cases."
-msgstr ""
-
-#: modules/enet/doc_classes/NetworkedMultiplayerENet.xml
-msgid "[url=https://facebook.github.io/zstd/]Zstandard[/url] compression."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "A high-level network interface to simplify multiplayer interactions."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Manages the connection to network peers. Assigns unique IDs to each client "
-"connected to the server. See also [MultiplayerAPI].\n"
-"[b]Note:[/b] The high-level multiplayer API protocol is an implementation "
-"detail and isn't meant to be used by non-Godot servers. It may change "
-"without notice."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "High-level multiplayer"
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "WebRTC Signaling Demo"
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Returns the current state of the connection. See [enum ConnectionStatus]."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Returns the ID of the [NetworkedMultiplayerPeer] who sent the most recent "
-"packet."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Returns the ID of this [NetworkedMultiplayerPeer]."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Waits up to 1 second to receive a new network event."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Sets the peer to which packets will be sent.\n"
-"The [code]id[/code] can be one of: [constant TARGET_PEER_BROADCAST] to send "
-"to all connected peers, [constant TARGET_PEER_SERVER] to send to the peer "
-"acting as server, a valid peer ID to send to that specific peer, a negative "
-"peer ID to send to all peers except that one. By default, the target peer is "
-"[constant TARGET_PEER_BROADCAST]."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"If [code]true[/code], this [NetworkedMultiplayerPeer] refuses new "
-"connections."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"The manner in which to send packets to the [code]target_peer[/code]. See "
-"[enum TransferMode]."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Emitted when a connection attempt fails."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Emitted when a connection attempt succeeds."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Emitted by the server when a client connects."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Emitted by the server when a client disconnects."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Emitted by clients when the server disconnects."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Packets are not acknowledged, no resend attempts are made for lost packets. "
-"Packets may arrive in any order. Potentially faster than [constant "
-"TRANSFER_MODE_UNRELIABLE_ORDERED]. Use for non-critical data, and always "
-"consider whether the order matters."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Packets are not acknowledged, no resend attempts are made for lost packets. "
-"Packets are received in the order they were sent in. Potentially faster than "
-"[constant TRANSFER_MODE_RELIABLE]. Use for non-critical data or data that "
-"would be outdated if received late due to resend attempt(s) anyway, for "
-"example movement and positional data."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid ""
-"Packets must be received and resend attempts should be made until the "
-"packets are acknowledged. Packets must be received in the order they were "
-"sent in. Most reliable transfer mode, but potentially the slowest due to the "
-"overhead. Use for critical data that must be transmitted and arrive in "
-"order, for example an ability being triggered or a chat message. Consider "
-"carefully if the information really is critical, and use sparingly."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "The ongoing connection disconnected."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "A connection attempt is ongoing."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "The connection attempt succeeded."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Packets are sent to the server and then redistributed to other peers."
-msgstr ""
-
-#: doc/classes/NetworkedMultiplayerPeer.xml
-msgid "Packets are sent to the server alone."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Scalable texture-based frame that tiles the texture's centers and sides, but "
-"keeps the corners' original size. Perfect for panels and dialog boxes."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Also known as 9-slice panels, NinePatchRect produces clean panels of any "
-"size, based on a small texture. To do so, it splits the texture in a 3×3 "
-"grid. When you scale the node, it tiles the texture's sides horizontally or "
-"vertically, the center on both axes but it doesn't scale or tile the corners."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Returns the size of the margin identified by the given [enum Margin] "
-"constant."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Sets the size of the margin identified by the given [enum Margin] constant "
-"to [code]value[/code] in pixels."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"The stretch mode to use for horizontal stretching/tiling. See [enum "
-"NinePatchRect.AxisStretchMode] for possible values."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"The stretch mode to use for vertical stretching/tiling. See [enum "
-"NinePatchRect.AxisStretchMode] for possible values."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"If [code]true[/code], draw the panel's center. Else, only draw the 9-slice's "
-"borders."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"The height of the 9-slice's bottom row. A margin of 16 means the 9-slice's "
-"bottom corners and side will have a height of 16 pixels. You can set all 4 "
-"margin values individually to create panels with non-uniform borders."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"The width of the 9-slice's left column. A margin of 16 means the 9-slice's "
-"left corners and side will have a width of 16 pixels. You can set all 4 "
-"margin values individually to create panels with non-uniform borders."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"The width of the 9-slice's right column. A margin of 16 means the 9-slice's "
-"right corners and side will have a width of 16 pixels. You can set all 4 "
-"margin values individually to create panels with non-uniform borders."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"The height of the 9-slice's top row. A margin of 16 means the 9-slice's top "
-"corners and side will have a height of 16 pixels. You can set all 4 margin "
-"values individually to create panels with non-uniform borders."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Rectangular region of the texture to sample from. If you're working with an "
-"atlas, use this property to define the area the 9-slice should use. All "
-"other properties are relative to this one. If the rect is empty, "
-"NinePatchRect will use the whole texture."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid "The node's texture resource."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid "Emitted when the node's texture changes."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Stretches the center texture across the NinePatchRect. This may cause the "
-"texture to be distorted."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Repeats the center texture across the NinePatchRect. This won't cause any "
-"visible distortion. The texture must be seamless for this to work without "
-"displaying artifacts between edges.\n"
-"[b]Note:[/b] Only supported when using the GLES3 renderer. When using the "
-"GLES2 renderer, this will behave like [constant AXIS_STRETCH_MODE_STRETCH]."
-msgstr ""
-
-#: doc/classes/NinePatchRect.xml
-msgid ""
-"Repeats the center texture across the NinePatchRect, but will also stretch "
-"the texture to make sure each tile is visible in full. This may cause the "
-"texture to be distorted, but less than [constant AXIS_STRETCH_MODE_STRETCH]. "
-"The texture must be seamless for this to work without displaying artifacts "
-"between edges.\n"
-"[b]Note:[/b] Only supported when using the GLES3 renderer. When using the "
-"GLES2 renderer, this will behave like [constant AXIS_STRETCH_MODE_STRETCH]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Base class for all [i]scene[/i] objects."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Nodes are Godot's building blocks. They can be assigned as the child of "
-"another node, resulting in a tree arrangement. A given node can contain any "
-"number of nodes as children with the requirement that all siblings (direct "
-"children of a node) should have unique names.\n"
-"A tree of nodes is called a [i]scene[/i]. Scenes can be saved to the disk "
-"and then instanced into other scenes. This allows for very high flexibility "
-"in the architecture and data model of Godot projects.\n"
-"[b]Scene tree:[/b] The [SceneTree] contains the active tree of nodes. When a "
-"node is added to the scene tree, it receives the [constant "
-"NOTIFICATION_ENTER_TREE] notification and its [method _enter_tree] callback "
-"is triggered. Child nodes are always added [i]after[/i] their parent node, i."
-"e. the [method _enter_tree] callback of a parent node will be triggered "
-"before its child's.\n"
-"Once all nodes have been added in the scene tree, they receive the [constant "
-"NOTIFICATION_READY] notification and their respective [method _ready] "
-"callbacks are triggered. For groups of nodes, the [method _ready] callback "
-"is called in reverse order, starting with the children and moving up to the "
-"parent nodes.\n"
-"This means that when adding a node to the scene tree, the following order "
-"will be used for the callbacks: [method _enter_tree] of the parent, [method "
-"_enter_tree] of the children, [method _ready] of the children and finally "
-"[method _ready] of the parent (recursively for the entire scene tree).\n"
-"[b]Processing:[/b] Nodes can override the \"process\" state, so that they "
-"receive a callback on each frame requesting them to process (do something). "
-"Normal processing (callback [method _process], toggled with [method "
-"set_process]) happens as fast as possible and is dependent on the frame "
-"rate, so the processing time [i]delta[/i] (in seconds) is passed as an "
-"argument. Physics processing (callback [method _physics_process], toggled "
-"with [method set_physics_process]) happens a fixed number of times per "
-"second (60 by default) and is useful for code related to the physics "
-"engine.\n"
-"Nodes can also process input events. When present, the [method _input] "
-"function will be called for each input that the program receives. In many "
-"cases, this can be overkill (unless used for simple projects), and the "
-"[method _unhandled_input] function might be preferred; it is called when the "
-"input event was not handled by anyone else (typically, GUI [Control] nodes), "
-"ensuring that the node only receives the events that were meant for it.\n"
-"To keep track of the scene hierarchy (especially when instancing scenes into "
-"other scenes), an \"owner\" can be set for the node with the [member owner] "
-"property. This keeps track of who instanced what. This is mostly useful when "
-"writing editors and tools, though.\n"
-"Finally, when a node is freed with [method Object.free] or [method "
-"queue_free], it will also free all its children.\n"
-"[b]Groups:[/b] Nodes can be added to as many groups as you want to be easy "
-"to manage, you could create groups like \"enemies\" or \"collectables\" for "
-"example, depending on your game. See [method add_to_group], [method "
-"is_in_group] and [method remove_from_group]. You can then retrieve all nodes "
-"in these groups, iterate them and even call methods on groups via the "
-"methods on [SceneTree].\n"
-"[b]Networking with nodes:[/b] After connecting to a server (or making one, "
-"see [NetworkedMultiplayerENet]), it is possible to use the built-in RPC "
-"(remote procedure call) system to communicate over the network. By calling "
-"[method rpc] with a method name, it will be called locally and in all "
-"connected peers (peers = clients and the server that accepts connections). "
-"To identify which node receives the RPC call, Godot will use its [NodePath] "
-"(make sure node names are the same on all peers). Also, take a look at the "
-"high-level networking tutorial and corresponding demos."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Nodes and Scenes"
-msgstr "Nodes und Szenen"
-
-#: doc/classes/Node.xml
-msgid "All Demos"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called when the node enters the [SceneTree] (e.g. upon instancing, scene "
-"changing, or after calling [method add_child] in a script). If the node has "
-"children, its [method _enter_tree] callback will be called first, and then "
-"that of the children.\n"
-"Corresponds to the [constant NOTIFICATION_ENTER_TREE] notification in "
-"[method Object._notification]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called when the node is about to leave the [SceneTree] (e.g. upon freeing, "
-"scene changing, or after calling [method remove_child] in a script). If the "
-"node has children, its [method _exit_tree] callback will be called last, "
-"after all its children have left the tree.\n"
-"Corresponds to the [constant NOTIFICATION_EXIT_TREE] notification in [method "
-"Object._notification] and signal [signal tree_exiting]. To get notified when "
-"the node has already left the active tree, connect to the [signal "
-"tree_exited]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"The string returned from this method is displayed as a warning in the Scene "
-"Dock if the script that overrides it is a [code]tool[/code] script.\n"
-"Returning an empty string produces no warning.\n"
-"Call [method update_configuration_warning] when the warning needs to be "
-"updated for this node."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called when there is an input event. The input event propagates up through "
-"the node tree until a node consumes it.\n"
-"It is only called if input processing is enabled, which is done "
-"automatically if this method is overridden, and can be toggled with [method "
-"set_process_input].\n"
-"To consume the input event and stop it propagating further to other nodes, "
-"[method SceneTree.set_input_as_handled] can be called.\n"
-"For gameplay input, [method _unhandled_input] and [method "
-"_unhandled_key_input] are usually a better fit as they allow the GUI to "
-"intercept the events first.\n"
-"[b]Note:[/b] This method is only called if the node is present in the scene "
-"tree (i.e. if it's not an orphan)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called during the physics processing step of the main loop. Physics "
-"processing means that the frame rate is synced to the physics, i.e. the "
-"[code]delta[/code] variable should be constant. [code]delta[/code] is in "
-"seconds.\n"
-"It is only called if physics processing is enabled, which is done "
-"automatically if this method is overridden, and can be toggled with [method "
-"set_physics_process].\n"
-"Corresponds to the [constant NOTIFICATION_PHYSICS_PROCESS] notification in "
-"[method Object._notification].\n"
-"[b]Note:[/b] This method is only called if the node is present in the scene "
-"tree (i.e. if it's not an orphan)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called during the processing step of the main loop. Processing happens at "
-"every frame and as fast as possible, so the [code]delta[/code] time since "
-"the previous frame is not constant. [code]delta[/code] is in seconds.\n"
-"It is only called if processing is enabled, which is done automatically if "
-"this method is overridden, and can be toggled with [method set_process].\n"
-"Corresponds to the [constant NOTIFICATION_PROCESS] notification in [method "
-"Object._notification].\n"
-"[b]Note:[/b] This method is only called if the node is present in the scene "
-"tree (i.e. if it's not an orphan)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called when the node is \"ready\", i.e. when both the node and its children "
-"have entered the scene tree. If the node has children, their [method _ready] "
-"callbacks get triggered first, and the parent node will receive the ready "
-"notification afterwards.\n"
-"Corresponds to the [constant NOTIFICATION_READY] notification in [method "
-"Object._notification]. See also the [code]onready[/code] keyword for "
-"variables.\n"
-"Usually used for initialization. For even earlier initialization, [method "
-"Object._init] may be used. See also [method _enter_tree].\n"
-"[b]Note:[/b] [method _ready] may be called only once for each node. After "
-"removing a node from the scene tree and adding it again, [code]_ready[/code] "
-"will not be called a second time. This can be bypassed by requesting another "
-"call with [method request_ready], which may be called anywhere before adding "
-"the node again."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called when an [InputEvent] hasn't been consumed by [method _input] or any "
-"GUI [Control] item. The input event propagates up through the node tree "
-"until a node consumes it.\n"
-"It is only called if unhandled input processing is enabled, which is done "
-"automatically if this method is overridden, and can be toggled with [method "
-"set_process_unhandled_input].\n"
-"To consume the input event and stop it propagating further to other nodes, "
-"[method SceneTree.set_input_as_handled] can be called.\n"
-"For gameplay input, this and [method _unhandled_key_input] are usually a "
-"better fit than [method _input] as they allow the GUI to intercept the "
-"events first.\n"
-"[b]Note:[/b] This method is only called if the node is present in the scene "
-"tree (i.e. if it's not an orphan)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Called when an [InputEventKey] hasn't been consumed by [method _input] or "
-"any GUI [Control] item. The input event propagates up through the node tree "
-"until a node consumes it.\n"
-"It is only called if unhandled key input processing is enabled, which is "
-"done automatically if this method is overridden, and can be toggled with "
-"[method set_process_unhandled_key_input].\n"
-"To consume the input event and stop it propagating further to other nodes, "
-"[method SceneTree.set_input_as_handled] can be called.\n"
-"For gameplay input, this and [method _unhandled_input] are usually a better "
-"fit than [method _input] as they allow the GUI to intercept the events "
-"first.\n"
-"[b]Note:[/b] This method is only called if the node is present in the scene "
-"tree (i.e. if it's not an orphan)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Adds a child node. Nodes can have any number of children, but every child "
-"must have a unique name. Child nodes are automatically deleted when the "
-"parent node is deleted, so an entire scene can be removed by deleting its "
-"topmost node.\n"
-"If [code]legible_unique_name[/code] is [code]true[/code], the child node "
-"will have a human-readable name based on the name of the node being "
-"instanced instead of its type.\n"
-"[b]Note:[/b] If the child node already has a parent, the function will fail. "
-"Use [method remove_child] first to remove the node from its current parent. "
-"For example:\n"
-"[codeblock]\n"
-"if child_node.get_parent():\n"
-"    child_node.get_parent().remove_child(child_node)\n"
-"add_child(child_node)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you "
-"must set [member owner] in addition to calling [method add_child]. This is "
-"typically relevant for [url=$DOCS_URL/tutorials/plugins/"
-"running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/"
-"tutorials/plugins/editor/index.html]editor plugins[/url]. If [method "
-"add_child] is called without setting [member owner], the newly added [Node] "
-"will not be visible in the scene tree, though it will be visible in the "
-"2D/3D view."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Adds [code]child_node[/code] as a child. The child is placed below the given "
-"[code]node[/code] in the list of children.\n"
-"If [code]legible_unique_name[/code] is [code]true[/code], the child node "
-"will have a human-readable name based on the name of the node being "
-"instanced instead of its type."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Adds the node to a group. Groups are helpers to name and organize a subset "
-"of nodes, for example \"enemies\" or \"collectables\". A node can be in any "
-"number of groups. Nodes can be assigned a group at any time, but will not be "
-"added until they are inside the scene tree (see [method is_inside_tree]). "
-"See notes in the description, and the group methods in [SceneTree].\n"
-"The [code]persistent[/code] option is used when packing node to "
-"[PackedScene] and saving to file. Non-persistent groups aren't stored.\n"
-"[b]Note:[/b] For performance reasons, the order of node groups is [i]not[/i] "
-"guaranteed. The order of node groups should not be relied upon as it can "
-"vary across project runs."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the node can process while the scene tree is "
-"paused (see [member pause_mode]). Always returns [code]true[/code] if the "
-"scene tree is not paused, and [code]false[/code] if the node is not in the "
-"tree."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Creates a new [SceneTreeTween] and binds it to this node. This is equivalent "
-"of doing:\n"
-"[codeblock]\n"
-"get_tree().create_tween().bind_node(self)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Duplicates the node, returning a new node.\n"
-"You can fine-tune the behavior using the [code]flags[/code] (see [enum "
-"DuplicateFlags]).\n"
-"[b]Note:[/b] It will not work properly if the node contains a script with "
-"constructor arguments (i.e. needs to supply arguments to [method Object."
-"_init] method). In that case, the node will be duplicated without a script."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Finds a descendant of this node whose name matches [code]mask[/code] as in "
-"[method String.match] (i.e. case-sensitive, but [code]\"*\"[/code] matches "
-"zero or more characters and [code]\"?\"[/code] matches any single character "
-"except [code]\".\"[/code]). Returns [code]null[/code] if no matching [Node] "
-"is found.\n"
-"[b]Note:[/b] It does not match against the full path, just against "
-"individual node names.\n"
-"If [code]owned[/code] is [code]true[/code], this method only finds nodes "
-"whose owner is this node. This is especially important for scenes "
-"instantiated through a script, because those scenes don't have an owner.\n"
-"[b]Note:[/b] As this method walks through all the descendants of the node, "
-"it is the slowest way to get a reference to another node. Whenever possible, "
-"consider using [method get_node] instead. To avoid using [method find_node] "
-"too often, consider caching the node reference into a variable."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Finds the first parent of the current node whose name matches [code]mask[/"
-"code] as in [method String.match] (i.e. case-sensitive, but [code]\"*\"[/"
-"code] matches zero or more characters and [code]\"?\"[/code] matches any "
-"single character except [code]\".\"[/code]).\n"
-"[b]Note:[/b] It does not match against the full path, just against "
-"individual node names.\n"
-"[b]Note:[/b] As this method walks upwards in the scene tree, it can be slow "
-"in large, deeply nested scene trees. Whenever possible, consider using "
-"[method get_node] instead. To avoid using [method find_parent] too often, "
-"consider caching the node reference into a variable."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns a child node by its index (see [method get_child_count]). This "
-"method is often used for iterating all children of a node.\n"
-"To access a child node via its name, use [method get_node]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Returns the number of child nodes."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Returns an array of references to node's children."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns an array listing the groups that the node is a member of.\n"
-"[b]Note:[/b] For performance reasons, the order of node groups is [i]not[/i] "
-"guaranteed. The order of node groups should not be relied upon as it can "
-"vary across project runs.\n"
-"[b]Note:[/b] The engine uses some group names internally (all starting with "
-"an underscore). To avoid conflicts with internal groups, do not add custom "
-"groups whose name starts with an underscore. To exclude internal groups "
-"while looping over [method get_groups], use the following snippet:\n"
-"[codeblock]\n"
-"# Stores the node's non-internal groups only (as an array of Strings).\n"
-"var non_internal_groups = []\n"
-"for group in get_groups():\n"
-"    if not group.begins_with(\"_\"):\n"
-"        non_internal_groups.push_back(group)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the node's index, i.e. its position among the siblings of its parent."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the peer ID of the network master for this node. See [method "
-"set_network_master]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Fetches a node. The [NodePath] can be either a relative path (from the "
-"current node) or an absolute path (in the scene tree) to a node. If the path "
-"does not exist, [code]null[/code] is returned and an error is logged. "
-"Attempts to access methods on the return value will result in an \"Attempt "
-"to call <method> on a null instance.\" error.\n"
-"[b]Note:[/b] Fetching absolute paths only works when the node is inside the "
-"scene tree (see [method is_inside_tree]).\n"
-"[b]Example:[/b] Assume your current node is Character and the following "
-"tree:\n"
-"[codeblock]\n"
-"/root\n"
-"/root/Character\n"
-"/root/Character/Sword\n"
-"/root/Character/Backpack/Dagger\n"
-"/root/MyGame\n"
-"/root/Swamp/Alligator\n"
-"/root/Swamp/Mosquito\n"
-"/root/Swamp/Goblin\n"
-"[/codeblock]\n"
-"Possible paths are:\n"
-"[codeblock]\n"
-"get_node(\"Sword\")\n"
-"get_node(\"Backpack/Dagger\")\n"
-"get_node(\"../Swamp/Alligator\")\n"
-"get_node(\"/root/MyGame\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Fetches a node and one of its resources as specified by the [NodePath]'s "
-"subname (e.g. [code]Area2D/CollisionShape2D:shape[/code]). If several nested "
-"resources are specified in the [NodePath], the last one will be fetched.\n"
-"The return value is an array of size 3: the first index points to the [Node] "
-"(or [code]null[/code] if not found), the second index points to the "
-"[Resource] (or [code]null[/code] if not found), and the third index is the "
-"remaining [NodePath], if any.\n"
-"For example, assuming that [code]Area2D/CollisionShape2D[/code] is a valid "
-"node and that its [code]shape[/code] property has been assigned a "
-"[RectangleShape2D] resource, one could have this kind of output:\n"
-"[codeblock]\n"
-"print(get_node_and_resource(\"Area2D/CollisionShape2D\")) # "
-"[[CollisionShape2D:1161], Null, ]\n"
-"print(get_node_and_resource(\"Area2D/CollisionShape2D:shape\")) # "
-"[[CollisionShape2D:1161], [RectangleShape2D:1156], ]\n"
-"print(get_node_and_resource(\"Area2D/CollisionShape2D:shape:extents\")) # "
-"[[CollisionShape2D:1161], [RectangleShape2D:1156], :extents]\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Similar to [method get_node], but does not log an error if [code]path[/code] "
-"does not point to a valid [Node]."
-msgstr ""
-
-#: doc/classes/Node.xml
-#, fuzzy
-msgid ""
-"Returns the parent node of the current node, or [code]null[/code] if the "
-"node lacks a parent."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the absolute path of the current node. This only works if the "
-"current node is inside the scene tree (see [method is_inside_tree])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the relative [NodePath] from this node to the specified [code]node[/"
-"code]. Both nodes must be in the same scene or the function will fail."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the time elapsed (in seconds) since the last physics-bound frame "
-"(see [method _physics_process]). This is always a constant value in physics "
-"processing unless the frames per second is changed via [member Engine."
-"iterations_per_second]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the node's order in the scene tree branch. For example, if called on "
-"the first child node the position is [code]0[/code]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns the time elapsed (in seconds) since the last process callback. This "
-"value may vary from frame to frame."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if this is an instance load placeholder. See "
-"[InstancePlaceholder]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Returns the [SceneTree] that contains this node."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Returns the node's [Viewport]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the node that the [NodePath] points to exists."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the [NodePath] points to a valid node and its "
-"subname points to a valid resource, e.g. [code]Area2D/CollisionShape2D:"
-"shape[/code]. Properties with a non-[Resource] type (e.g. nodes or primitive "
-"math types) are not considered resources."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the given node is a direct or indirect child of "
-"the current node."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the node is folded (collapsed) in the Scene "
-"dock."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the given node occurs later in the scene "
-"hierarchy than the current node."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if this node is in the specified group. See notes "
-"in the description, and the group methods in [SceneTree]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if this node is currently inside a [SceneTree]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the local system is the master of this node."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the physics interpolated flag is set for this "
-"Node (see [member physics_interpolation_mode]).\n"
-"[b]Note:[/b] Interpolation will only be active if both the flag is set "
-"[b]and[/b] physics interpolation is enabled within the [SceneTree]. This can "
-"be tested using [method is_physics_interpolated_and_enabled]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if physics interpolation is enabled (see [member "
-"physics_interpolation_mode]) [b]and[/b] enabled in the [SceneTree].\n"
-"This is a convenience version of [method is_physics_interpolated] that also "
-"checks whether physics interpolation is enabled globally.\n"
-"See [member SceneTree.physics_interpolation] and [member ProjectSettings."
-"physics/common/physics_interpolation]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if physics processing is enabled (see [method "
-"set_physics_process])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if internal physics processing is enabled (see "
-"[method set_physics_process_internal])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if processing is enabled (see [method "
-"set_process])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the node is processing input (see [method "
-"set_process_input])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if internal processing is enabled (see [method "
-"set_process_internal])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the node is processing unhandled input (see "
-"[method set_process_unhandled_input])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Returns [code]true[/code] if the node is processing unhandled key input (see "
-"[method set_process_unhandled_key_input])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Moves a child node to a different position (order) among the other children. "
-"Since calls, signals, etc are performed by tree order, changing the order of "
-"children nodes may be useful."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Prints all stray nodes (nodes outside the [SceneTree]). Used for debugging. "
-"Works only in debug builds."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Prints the tree to stdout. Used mainly for debugging purposes. This version "
-"displays the path relative to the current node, and is good for copy/pasting "
-"into the [method get_node] function.\n"
-"[b]Example output:[/b]\n"
-"[codeblock]\n"
-"TheGame\n"
-"TheGame/Menu\n"
-"TheGame/Menu/Label\n"
-"TheGame/Menu/Camera2D\n"
-"TheGame/SplashScreen\n"
-"TheGame/SplashScreen/Camera2D\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Similar to [method print_tree], this prints the tree to stdout. This version "
-"displays a more graphical representation similar to what is displayed in the "
-"scene inspector. It is useful for inspecting larger trees.\n"
-"[b]Example output:[/b]\n"
-"[codeblock]\n"
-" ┖╴TheGame\n"
-"    ┠╴Menu\n"
-"    ┃  ┠╴Label\n"
-"    ┃  ┖╴Camera2D\n"
-"    ┖╴SplashScreen\n"
-"       ┖╴Camera2D\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Calls the given method (if present) with the arguments given in [code]args[/"
-"code] on this node and recursively on all its children. If the "
-"[code]parent_first[/code] argument is [code]true[/code], the method will be "
-"called on the current node first, then on all its children. If "
-"[code]parent_first[/code] is [code]false[/code], the children will be called "
-"first."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notifies the current node and all its children recursively by calling "
-"[method Object.notification] on all of them."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Queues a node for deletion at the end of the current frame. When deleted, "
-"all of its child nodes will be deleted as well. This method ensures it's "
-"safe to delete the node, contrary to [method Object.free]. Use [method "
-"Object.is_queued_for_deletion] to check whether a node will be deleted at "
-"the end of the frame.\n"
-"[b]Important:[/b] If you have a variable pointing to a node, it will [i]not[/"
-"i] be assigned to [code]null[/code] once the node is freed. Instead, it will "
-"point to a [i]previously freed instance[/i] and you should validate it with "
-"[method @GDScript.is_instance_valid] before attempting to call its methods "
-"or access its properties."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Moves this node to the bottom of parent node's children hierarchy. This is "
-"often useful in GUIs ([Control] nodes), because their order of drawing "
-"depends on their order in the tree. The top Node is drawn first, then any "
-"siblings below the top Node in the hierarchy are successively drawn on top "
-"of it. After using [code]raise[/code], a Control will be drawn on top of its "
-"siblings."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Removes a node and sets all its children as children of the parent node (if "
-"it exists). All event subscriptions that pass by the removed node will be "
-"unsubscribed."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Removes a child node. The node is NOT deleted and must be deleted manually.\n"
-"[b]Note:[/b] This function may set the [member owner] of the removed Node "
-"(or its descendants) to be [code]null[/code], if that [member owner] is no "
-"longer a parent or ancestor."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Removes a node from a group. See notes in the description, and the group "
-"methods in [SceneTree]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Replaces a node in a scene by the given one. Subscriptions that pass through "
-"this node will be lost.\n"
-"[b]Note:[/b] The given node will become the new parent of any child nodes "
-"that the replaced node had.\n"
-"[b]Note:[/b] The replaced node is not automatically freed, so you either "
-"need to keep it in a variable for later use or free it using [method Object."
-"free]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Requests that [code]_ready[/code] be called again. Note that the method "
-"won't be called immediately, but is scheduled for when the node is added to "
-"the scene tree again (see [method _ready]). [code]_ready[/code] is called "
-"only for the node which requested it, which means that you need to request "
-"ready for each child if you want them to call [code]_ready[/code] too (in "
-"which case, [code]_ready[/code] will be called in the same order as it would "
-"normally)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"When physics interpolation is active, moving a node to a radically different "
-"transform (such as placement within a level) can result in a visible glitch "
-"as the object is rendered moving from the old to new position over the "
-"physics tick.\n"
-"This glitch can be prevented by calling [code]reset_physics_interpolation[/"
-"code], which temporarily turns off interpolation until the physics tick is "
-"complete.\n"
-"[constant NOTIFICATION_RESET_PHYSICS_INTERPOLATION] will be received by the "
-"node and all children recursively.\n"
-"[b]Note:[/b] This function should be called [b]after[/b] moving the node, "
-"rather than before."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sends a remote procedure call request for the given [code]method[/code] to "
-"peers on the network (and locally), optionally sending all additional "
-"arguments as arguments to the method called by the RPC. The call request "
-"will only be received by nodes with the same [NodePath], including the exact "
-"same node name. Behaviour depends on the RPC configuration for the given "
-"method, see [method rpc_config]. Methods are not exposed to RPCs by default. "
-"See also [method rset] and [method rset_config] for properties. Returns "
-"[code]null[/code].\n"
-"[b]Note:[/b] You can only safely use RPCs on clients after you received the "
-"[code]connected_to_server[/code] signal from the [SceneTree]. You also need "
-"to keep track of the connection state, either by the [SceneTree] signals "
-"like [code]server_disconnected[/code] or by checking [code]SceneTree."
-"network_peer.get_connection_status() == CONNECTION_CONNECTED[/code]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Changes the RPC mode for the given [code]method[/code] to the given "
-"[code]mode[/code]. See [enum MultiplayerAPI.RPCMode]. An alternative is "
-"annotating methods and properties with the corresponding keywords "
-"([code]remote[/code], [code]master[/code], [code]puppet[/code], "
-"[code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code]). "
-"By default, methods are not exposed to networking (and RPCs). See also "
-"[method rset] and [method rset_config] for properties."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sends a [method rpc] to a specific peer identified by [code]peer_id[/code] "
-"(see [method NetworkedMultiplayerPeer.set_target_peer]). Returns [code]null[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sends a [method rpc] using an unreliable protocol. Returns [code]null[/code]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sends a [method rpc] to a specific peer identified by [code]peer_id[/code] "
-"using an unreliable protocol (see [method NetworkedMultiplayerPeer."
-"set_target_peer]). Returns [code]null[/code]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Remotely changes a property's value on other peers (and locally). Behaviour "
-"depends on the RPC configuration for the given property, see [method "
-"rset_config]. See also [method rpc] for RPCs for methods, most information "
-"applies to this method as well."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Changes the RPC mode for the given [code]property[/code] to the given "
-"[code]mode[/code]. See [enum MultiplayerAPI.RPCMode]. An alternative is "
-"annotating methods and properties with the corresponding keywords "
-"([code]remote[/code], [code]master[/code], [code]puppet[/code], "
-"[code]remotesync[/code], [code]mastersync[/code], [code]puppetsync[/code]). "
-"By default, properties are not exposed to networking (and RPCs). See also "
-"[method rpc] and [method rpc_config] for methods."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Remotely changes the property's value on a specific peer identified by "
-"[code]peer_id[/code] (see [method NetworkedMultiplayerPeer.set_target_peer])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Remotely changes the property's value on other peers (and locally) using an "
-"unreliable protocol."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Remotely changes property's value on a specific peer identified by "
-"[code]peer_id[/code] using an unreliable protocol (see [method "
-"NetworkedMultiplayerPeer.set_target_peer])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Sets the folded state of the node in the Scene dock."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sets the node's network master to the peer with the given peer ID. The "
-"network master is the peer that has authority over the node on the network. "
-"Useful in conjunction with the [code]master[/code] and [code]puppet[/code] "
-"keywords. Inherited from the parent node by default, which ultimately "
-"defaults to peer ID 1 (the server). If [code]recursive[/code], the given "
-"peer is recursively set as the master for all children of this node."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables or disables physics (i.e. fixed framerate) processing. When a node "
-"is being processed, it will receive a [constant "
-"NOTIFICATION_PHYSICS_PROCESS] at a fixed (usually 60 FPS, see [member Engine."
-"iterations_per_second] to change) interval (and the [method "
-"_physics_process] callback will be called if exists). Enabled automatically "
-"if [method _physics_process] is overridden. Any calls to this before [method "
-"_ready] will be ignored."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables or disables internal physics for this node. Internal physics "
-"processing happens in isolation from the normal [method _physics_process] "
-"calls and is used by some nodes internally to guarantee proper functioning "
-"even if the node is paused or physics processing is disabled for scripting "
-"([method set_physics_process]). Only useful for advanced uses to manipulate "
-"built-in nodes' behavior.\n"
-"[b]Warning:[/b] Built-in Nodes rely on the internal processing for their own "
-"logic, so changing this value from your code may lead to unexpected "
-"behavior. Script access to this internal logic is provided for specific "
-"advanced uses, but is unsafe and not supported."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables or disables processing. When a node is being processed, it will "
-"receive a [constant NOTIFICATION_PROCESS] on every drawn frame (and the "
-"[method _process] callback will be called if exists). Enabled automatically "
-"if [method _process] is overridden. Any calls to this before [method _ready] "
-"will be ignored."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables or disables input processing. This is not required for GUI controls! "
-"Enabled automatically if [method _input] is overridden. Any calls to this "
-"before [method _ready] will be ignored."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables or disabled internal processing for this node. Internal processing "
-"happens in isolation from the normal [method _process] calls and is used by "
-"some nodes internally to guarantee proper functioning even if the node is "
-"paused or processing is disabled for scripting ([method set_process]). Only "
-"useful for advanced uses to manipulate built-in nodes' behavior.\n"
-"[b]Warning:[/b] Built-in Nodes rely on the internal processing for their own "
-"logic, so changing this value from your code may lead to unexpected "
-"behavior. Script access to this internal logic is provided for specific "
-"advanced uses, but is unsafe and not supported."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables unhandled input processing. This is not required for GUI controls! "
-"It enables the node to receive all input that was not previously handled "
-"(usually by a [Control]). Enabled automatically if [method _unhandled_input] "
-"is overridden. Any calls to this before [method _ready] will be ignored."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Enables unhandled key input processing. Enabled automatically if [method "
-"_unhandled_key_input] is overridden. Any calls to this before [method "
-"_ready] will be ignored."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sets whether this is an instance load placeholder. See [InstancePlaceholder]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Updates the warning displayed for this node in the Scene Dock.\n"
-"Use [method _get_configuration_warning] to setup the warning message to "
-"display."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"The override to the default [MultiplayerAPI]. Set to [code]null[/code] to "
-"use the default [SceneTree] one."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"If a scene is instantiated from a file, its topmost node contains the "
-"absolute file path from which it was loaded in [member filename] (e.g. "
-"[code]res://levels/1.tscn[/code]). Otherwise, [member filename] is set to an "
-"empty string."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"The [MultiplayerAPI] instance associated with this node. Either the [member "
-"custom_multiplayer], or the default SceneTree one (if inside tree)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"The name of the node. This name is unique among the siblings (other child "
-"nodes from the same parent). When set to an existing name, the node will be "
-"automatically renamed.\n"
-"[b]Note:[/b] Auto-generated names might include the [code]@[/code] "
-"character, which is reserved for unique names when using [method add_child]. "
-"When setting the name manually, any [code]@[/code] will be removed."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"The node owner. A node can have any other node as owner (as long as it is a "
-"valid parent, grandparent, etc. ascending in the tree). When saving a node "
-"(using [PackedScene]), all the nodes it owns will be saved with it. This "
-"allows for the creation of complex [SceneTree]s, with instancing and "
-"subinstancing.\n"
-"[b]Note:[/b] If you want a child to be persisted to a [PackedScene], you "
-"must set [member owner] in addition to calling [method add_child]. This is "
-"typically relevant for [url=$DOCS_URL/tutorials/plugins/"
-"running_code_in_the_editor.html]tool scripts[/url] and [url=$DOCS_URL/"
-"tutorials/plugins/editor/index.html]editor plugins[/url]. If [method "
-"add_child] is called without setting [member owner], the newly added [Node] "
-"will not be visible in the scene tree, though it will be visible in the "
-"2D/3D view."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Pause mode. How the node will behave if the [SceneTree] is paused."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Allows enabling or disabling physics interpolation per node, offering a "
-"finer grain of control than turning physics interpolation on and off "
-"globally.\n"
-"[b]Note:[/b] This can be especially useful for [Camera]s, where custom "
-"interpolation can sometimes give superior results."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"The node's priority in the execution order of the enabled processing "
-"callbacks (i.e. [constant NOTIFICATION_PROCESS], [constant "
-"NOTIFICATION_PHYSICS_PROCESS] and their internal counterparts). Nodes whose "
-"process priority value is [i]lower[/i] will have their processing callbacks "
-"executed first."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Sets this node's name as a unique name in its [member owner]. This allows "
-"the node to be accessed as [code]%Name[/code] instead of the full path, from "
-"any node within that scene.\n"
-"If another node with the same owner already had that name declared as "
-"unique, that other node's name will no longer be set as having a unique name."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Emitted when a child node enters the scene tree, either because it entered "
-"on its own or because this node entered with it.\n"
-"This signal is emitted [i]after[/i] the child node's own [constant "
-"NOTIFICATION_ENTER_TREE] and [signal tree_entered]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Emitted when a child node is about to exit the scene tree, either because it "
-"is being removed or freed directly, or because this node is exiting the "
-"tree.\n"
-"When this signal is received, the child [code]node[/code] is still in the "
-"tree and valid. This signal is emitted [i]after[/i] the child node's own "
-"[signal tree_exiting] and [constant NOTIFICATION_EXIT_TREE]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Emitted when the node is ready."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Emitted when the node is renamed."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Emitted when the node enters the tree.\n"
-"This signal is emitted [i]after[/i] the related [constant "
-"NOTIFICATION_ENTER_TREE] notification."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Emitted after the node exits the tree and is no longer active."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Emitted when the node is still active but about to exit the tree. This is "
-"the right place for de-initialization (or a \"destructor\", if you will).\n"
-"This signal is emitted [i]before[/i] the related [constant "
-"NOTIFICATION_EXIT_TREE] notification."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when the node enters a [SceneTree].\n"
-"This notification is emitted [i]before[/i] the related [signal tree_entered]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when the node is about to exit a [SceneTree].\n"
-"This notification is emitted [i]after[/i] the related [signal tree_exiting]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Notification received when the node is moved in the parent."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Notification received when the node is ready. See [method _ready]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Notification received when the node is paused."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Notification received when the node is unpaused."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received every frame when the physics process flag is set (see "
-"[method set_physics_process])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received every frame when the process flag is set (see [method "
-"set_process])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when a node is set as a child of another node.\n"
-"[b]Note:[/b] This doesn't mean that a node entered the [SceneTree]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when a node is unparented (parent removed it from the "
-"list of children)."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Notification received when the node is instanced."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when a drag operation begins. All nodes receive this "
-"notification, not only the dragged one.\n"
-"Can be triggered either by dragging a [Control] that provides drag data (see "
-"[method Control.get_drag_data]) or using [method Control.force_drag].\n"
-"Use [method Viewport.gui_get_drag_data] to get the dragged data."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when a drag operation ends.\n"
-"Use [method Viewport.gui_is_drag_successful] to check if the drag succeeded."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Notification received when the node's [NodePath] changed."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received every frame when the internal process flag is set (see "
-"[method set_process_internal])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received every frame when the internal physics process flag is "
-"set (see [method set_physics_process_internal])."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when the node is ready, just before [constant "
-"NOTIFICATION_READY] is received. Unlike the latter, it's sent every time the "
-"node enters tree, instead of only once."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Notification received when [method reset_physics_interpolation] is called on "
-"the node or parent nodes."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Inherits pause mode from the node's parent. For the root node, it is "
-"equivalent to [constant PAUSE_MODE_STOP]. Default."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Stops processing when the [SceneTree] is paused."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Continue to process regardless of the [SceneTree] pause state."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Inherits physics interpolation mode from the node's parent. For the root "
-"node, it is equivalent to [constant PHYSICS_INTERPOLATION_MODE_ON]. Default."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Turn off physics interpolation in this node and children set to [constant "
-"PHYSICS_INTERPOLATION_MODE_INHERIT]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Turn on physics interpolation in this node and children set to [constant "
-"PHYSICS_INTERPOLATION_MODE_INHERIT]."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Duplicate the node's signals."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Duplicate the node's groups."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid "Duplicate the node's scripts."
-msgstr ""
-
-#: doc/classes/Node.xml
-msgid ""
-"Duplicate using instancing.\n"
-"An instance stays linked to the original so when the original changes, the "
-"instance changes too."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"A 2D game object, inherited by all 2D-related nodes. Has a position, "
-"rotation, scale, and Z index."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"A 2D game object, with a transform (position, rotation, and scale). All 2D "
-"nodes, including physics objects and sprites, inherit from Node2D. Use "
-"Node2D as a parent node to move, scale and rotate children in a 2D project. "
-"Also gives control of the node's render order."
-msgstr ""
-
-#: doc/classes/Node2D.xml doc/classes/Vector2.xml
-msgid "All 2D Demos"
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Multiplies the current scale by the [code]ratio[/code] vector."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Returns the angle between the node and the [code]point[/code] in radians.\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"node2d_get_angle_to.png]Illustration of the returned angle.[/url]"
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Returns the [Transform2D] relative to this node's parent."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Adds the [code]offset[/code] vector to the node's global position."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Rotates the node so it points towards the [code]point[/code], which is "
-"expected to use global coordinates."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Applies a local translation on the node's X axis based on the [method Node."
-"_process]'s [code]delta[/code]. If [code]scaled[/code] is [code]false[/"
-"code], normalizes the movement."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Applies a local translation on the node's Y axis based on the [method Node."
-"_process]'s [code]delta[/code]. If [code]scaled[/code] is [code]false[/"
-"code], normalizes the movement."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Applies a rotation to the node, in radians, starting from its current "
-"rotation."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Transforms the provided local position into a position in global coordinate "
-"space. The input is expected to be local relative to the [Node2D] it is "
-"called on. e.g. Applying this method to the positions of child nodes will "
-"correctly transform their positions into the global coordinate space, but "
-"applying it to a node's own position will give an incorrect result, as it "
-"will incorporate the node's own transformation into its global position."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Transforms the provided global position into a position in local coordinate "
-"space. The output will be local relative to the [Node2D] it is called on. e."
-"g. It is appropriate for determining the positions of child nodes, but it is "
-"not appropriate for determining its own position relative to its parent."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Translates the node by the given [code]offset[/code] in local coordinates."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Global position."
-msgstr "Gobale Position."
-
-#: doc/classes/Node2D.xml
-msgid "Global rotation in radians."
-msgstr "Globale Rotation im Bogenmaß."
-
-#: doc/classes/Node2D.xml
-msgid "Global rotation in degrees."
-msgstr "Globale Rotation in Grad."
-
-#: doc/classes/Node2D.xml
-msgid "Global scale."
-msgstr "Globaler Maßstab."
-
-#: doc/classes/Node2D.xml
-msgid "Global [Transform2D]."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Position, relative to the node's parent."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Rotation in radians, relative to the node's parent."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Rotation in degrees, relative to the node's parent."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"The node's scale. Unscaled value: [code](1, 1)[/code].\n"
-"[b]Note:[/b] Negative X scales in 2D are not decomposable from the "
-"transformation matrix. Due to the way scale is represented with "
-"transformation matrices in Godot, negative scales on the X axis will be "
-"changed to negative scales on the Y axis and a rotation of 180 degrees when "
-"decomposed."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid "Local [Transform2D]."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"If [code]true[/code], the node's Z index is relative to its parent's Z "
-"index. If this node's Z index is 2 and its parent's effective Z index is 3, "
-"then this node's effective Z index will be 2 + 3 = 5."
-msgstr ""
-
-#: doc/classes/Node2D.xml
-msgid ""
-"Z index. Controls the order in which the nodes render. A node with a higher "
-"Z index will display in front of others. Must be between [constant "
-"VisualServer.CANVAS_ITEM_Z_MIN] and [constant VisualServer."
-"CANVAS_ITEM_Z_MAX] (inclusive)."
-msgstr ""
-"Z-Index. Legt fest, in welcher Reihenfolge die Nodes gerendert werde . Eine "
-"Node mit höherem Z-Index wird über anderen angezeigt. Wert muss zwischen "
-"[constant VisualServer.CANVAS_ITEM_Z_MIN] und [constant VisualServer."
-"CANVAS_ITEM_Z_MAX] liegen (einschließlich)."
-
-#: doc/classes/NodePath.xml
-msgid "Pre-parsed scene tree path."
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"A pre-parsed relative or absolute path in a scene tree, for use with [method "
-"Node.get_node] and similar functions. It can reference a node, a resource "
-"within a node, or a property of a node or resource. For instance, "
-"[code]\"Path2D/PathFollow2D/Sprite:texture:size\"[/code] would refer to the "
-"[code]size[/code] property of the [code]texture[/code] resource on the node "
-"named [code]\"Sprite\"[/code] which is a child of the other named nodes in "
-"the path.\n"
-"You will usually just pass a string to [method Node.get_node] and it will be "
-"automatically converted, but you may occasionally want to parse a path ahead "
-"of time with [NodePath] or the literal syntax [code]@\"path\"[/code]. "
-"Exporting a [NodePath] variable will give you a node selection widget in the "
-"properties panel of the editor, which can often be useful.\n"
-"A [NodePath] is composed of a list of slash-separated node names (like a "
-"filesystem path) and an optional colon-separated list of \"subnames\" which "
-"can be resources or properties.\n"
-"Some examples of NodePaths include the following:\n"
-"[codeblock]\n"
-"# No leading slash means it is relative to the current node.\n"
-"@\"A\" # Immediate child A\n"
-"@\"A/B\" # A's child B\n"
-"@\".\" # The current node.\n"
-"@\"..\" # The parent node.\n"
-"@\"../C\" # A sibling node C.\n"
-"# A leading slash means it is absolute from the SceneTree.\n"
-"@\"/root\" # Equivalent to get_tree().get_root().\n"
-"@\"/root/Main\" # If your main scene's root node were named \"Main\".\n"
-"@\"/root/MyAutoload\" # If you have an autoloaded node or scene.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] In the editor, [NodePath] properties are automatically updated "
-"when moving, renaming or deleting a node in the scene tree, but they are "
-"never updated at runtime."
-msgstr ""
-
-#: doc/classes/NodePath.xml doc/classes/PackedScene.xml doc/classes/Panel.xml
-#: doc/classes/PanelContainer.xml doc/classes/TileMap.xml
-#: doc/classes/TileSet.xml
-msgid "2D Role Playing Game Demo"
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Creates a NodePath from a string, e.g. [code]\"Path2D/PathFollow2D/Sprite:"
-"texture:size\"[/code]. A path is absolute if it starts with a slash. "
-"Absolute paths are only valid in the global scene tree, not within "
-"individual scenes. In a relative path, [code]\".\"[/code] and [code]\"..\"[/"
-"code] indicate the current node and its parent.\n"
-"The \"subnames\" optionally included after the path to the target node can "
-"point to resources or properties, and can also be nested.\n"
-"Examples of valid NodePaths (assuming that those nodes exist and have the "
-"referenced resources or properties):\n"
-"[codeblock]\n"
-"# Points to the Sprite node\n"
-"\"Path2D/PathFollow2D/Sprite\"\n"
-"# Points to the Sprite node and its \"texture\" resource.\n"
-"# get_node() would retrieve \"Sprite\", while get_node_and_resource()\n"
-"# would retrieve both the Sprite node and the \"texture\" resource.\n"
-"\"Path2D/PathFollow2D/Sprite:texture\"\n"
-"# Points to the Sprite node and its \"position\" property.\n"
-"\"Path2D/PathFollow2D/Sprite:position\"\n"
-"# Points to the Sprite node and the \"x\" component of its \"position\" "
-"property.\n"
-"\"Path2D/PathFollow2D/Sprite:position:x\"\n"
-"# Absolute path (from \"root\")\n"
-"\"/root/Level/Path2D\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Returns a node path with a colon character ([code]:[/code]) prepended, "
-"transforming it to a pure property path with no node name (defaults to "
-"resolving from the current node).\n"
-"[codeblock]\n"
-"# This will be parsed as a node path to the \"x\" property in the "
-"\"position\" node\n"
-"var node_path = NodePath(\"position:x\")\n"
-"# This will be parsed as a node path to the \"x\" component of the "
-"\"position\" property in the current node\n"
-"var property_path = node_path.get_as_property_path()\n"
-"print(property_path) # :position:x\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Returns all subnames concatenated with a colon character ([code]:[/code]) as "
-"separator, i.e. the right side of the first colon in a node path.\n"
-"[codeblock]\n"
-"var nodepath = NodePath(\"Path2D/PathFollow2D/Sprite:texture:load_path\")\n"
-"print(nodepath.get_concatenated_subnames()) # texture:load_path\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Gets the node name indicated by [code]idx[/code] (0 to [method "
-"get_name_count] - 1).\n"
-"[codeblock]\n"
-"var node_path = NodePath(\"Path2D/PathFollow2D/Sprite\")\n"
-"print(node_path.get_name(0)) # Path2D\n"
-"print(node_path.get_name(1)) # PathFollow2D\n"
-"print(node_path.get_name(2)) # Sprite\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Gets the number of node names which make up the path. Subnames (see [method "
-"get_subname_count]) are not included.\n"
-"For example, [code]\"Path2D/PathFollow2D/Sprite\"[/code] has 3 names."
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Gets the resource or property name indicated by [code]idx[/code] (0 to "
-"[method get_subname_count]).\n"
-"[codeblock]\n"
-"var node_path = NodePath(\"Path2D/PathFollow2D/Sprite:texture:load_path\")\n"
-"print(node_path.get_subname(0)) # texture\n"
-"print(node_path.get_subname(1)) # load_path\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Gets the number of resource or property names (\"subnames\") in the path. "
-"Each subname is listed after a colon character ([code]:[/code]) in the node "
-"path.\n"
-"For example, [code]\"Path2D/PathFollow2D/Sprite:texture:load_path\"[/code] "
-"has 2 subnames."
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid ""
-"Returns [code]true[/code] if the node path is absolute (as opposed to "
-"relative), which means that it starts with a slash character ([code]/[/"
-"code]). Absolute node paths can be used to access the root node ([code]\"/"
-"root\"[/code]) or autoloads (e.g. [code]\"/global\"[/code] if a \"global\" "
-"autoload was registered)."
-msgstr ""
-
-#: doc/classes/NodePath.xml
-msgid "Returns [code]true[/code] if the node path is empty."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid "[OpenSimplexNoise] filled texture."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid ""
-"Uses an [OpenSimplexNoise] to fill the texture data. You can specify the "
-"texture size but keep in mind that larger textures will take longer to "
-"generate and seamless noise only works with square sized textures.\n"
-"NoiseTexture can also generate normalmap textures.\n"
-"The class uses [Thread]s to generate the texture data internally, so [method "
-"Texture.get_data] may return [code]null[/code] if the generation process has "
-"not completed yet. In that case, you need to wait for the texture to be "
-"generated before accessing the data:\n"
-"[codeblock]\n"
-"var texture = preload(\"res://noise.tres\")\n"
-"yield(texture, \"changed\")\n"
-"var image = texture.get_data()\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid ""
-"If [code]true[/code], the resulting texture contains a normal map created "
-"from the original noise interpreted as a bump map."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid ""
-"Strength of the bump maps used in this texture. A higher value will make the "
-"bump maps appear larger while a lower value will make them appear softer."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid "Height of the generated texture."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid "The [OpenSimplexNoise] instance used to generate the noise."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid ""
-"An offset used to specify the noise space coordinate of the top left corner "
-"of the generated noise. This value is ignored if [member seamless] is "
-"enabled."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid ""
-"Whether the texture can be tiled without visible seams or not. Seamless "
-"textures take longer to generate.\n"
-"[b]Note:[/b] Seamless noise has a lower contrast compared to non-seamless "
-"noise. This is due to the way noise uses higher dimensions for generating "
-"seamless noise."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/NoiseTexture.xml
-msgid "Width of the generated texture."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Base class for all non-built-in types."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Every class which is not a built-in type inherits from this class.\n"
-"You can construct Objects from scripting languages, using [code]Object.new()"
-"[/code] in GDScript, [code]new Object[/code] in C#, or the \"Construct "
-"Object\" node in VisualScript.\n"
-"Objects do not manage memory. If a class inherits from Object, you will have "
-"to delete instances of it manually. To do so, call the [method free] method "
-"from your script or delete the instance from C++.\n"
-"Some classes that extend Object add memory management. This is the case of "
-"[Reference], which counts references and deletes itself automatically when "
-"no longer referenced. [Node], another fundamental type, deletes all its "
-"children when freed from memory.\n"
-"Objects export properties, which are mainly useful for storage and editing, "
-"but not really so much in programming. Properties are exported in [method "
-"_get_property_list] and handled in [method _get] and [method _set]. However, "
-"scripting languages and C++ have simpler means to export them.\n"
-"Property membership can be tested directly in GDScript using [code]in[/"
-"code]:\n"
-"[codeblock]\n"
-"var n = Node2D.new()\n"
-"print(\"position\" in n) # Prints \"True\".\n"
-"print(\"other_property\" in n) # Prints \"False\".\n"
-"[/codeblock]\n"
-"The [code]in[/code] operator will evaluate to [code]true[/code] as long as "
-"the key exists, even if the value is [code]null[/code].\n"
-"Objects also receive notifications. Notifications are a simple way to notify "
-"the object about different events, so they can all be handled together. See "
-"[method _notification].\n"
-"[b]Note:[/b] Unlike references to a [Reference], references to an Object "
-"stored in a variable can become invalid without warning. Therefore, it's "
-"recommended to use [Reference] for data classes instead of [Object].\n"
-"[b]Note:[/b] Due to a bug, you can't create a \"plain\" Object using "
-"[code]Object.new()[/code]. Instead, use [code]ClassDB.instance(\"Object\")[/"
-"code]. This bug only applies to Object itself, not any of its descendents "
-"like [Reference]."
-msgstr ""
-
-#: doc/classes/Object.xml doc/classes/Reference.xml doc/classes/Resource.xml
-msgid "When and how to avoid using nodes for everything"
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Advanced exports using _get_property_list()"
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Virtual method which can be overridden to customize the return value of "
-"[method get].\n"
-"Returns the given property. Returns [code]null[/code] if the [code]property[/"
-"code] does not exist."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Virtual method which can be overridden to customize the return value of "
-"[method get_property_list].\n"
-"Returns the object's property list as an [Array] of dictionaries.\n"
-"Each property's [Dictionary] must contain at least [code]name: String[/code] "
-"and [code]type: int[/code] (see [enum Variant.Type]) entries. Optionally, it "
-"can also include [code]hint: int[/code] (see [enum PropertyHint]), "
-"[code]hint_string: String[/code], and [code]usage: int[/code] (see [enum "
-"PropertyUsageFlags])."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Called when the object is initialized in memory. Can be defined to take in "
-"parameters, that are passed in when constructing.\n"
-"[b]Note:[/b] If [method _init] is defined with required parameters, then "
-"explicit construction is the only valid means of creating an Object of the "
-"class. If any other means (such as [method PackedScene.instance]) is used, "
-"then initialization will fail."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Called whenever the object receives a notification, which is identified in "
-"[code]what[/code] by a constant. The base [Object] has two constants "
-"[constant NOTIFICATION_POSTINITIALIZE] and [constant "
-"NOTIFICATION_PREDELETE], but subclasses such as [Node] define a lot more "
-"notifications which are also received by this method."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Virtual method which can be overridden to customize the return value of "
-"[method set].\n"
-"Sets a property. Returns [code]true[/code] if the [code]property[/code] "
-"exists."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Virtual method which can be overridden to customize the return value of "
-"[method to_string], and thus the object's representation where it is "
-"converted to a string, e.g. with [code]print(obj)[/code].\n"
-"Returns a [String] representing the object. If not overridden, defaults to "
-"[code]\"[ClassName:RID]\"[/code]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Adds a user-defined [code]signal[/code]. Arguments are optional, but can be "
-"added as an [Array] of dictionaries, each containing [code]name: String[/"
-"code] and [code]type: int[/code] (see [enum Variant.Type]) entries."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Calls the [code]method[/code] on the object and returns the result. This "
-"method supports a variable number of arguments, so parameters are passed as "
-"a comma separated list. Example:\n"
-"[codeblock]\n"
-"call(\"set\", \"position\", Vector2(42.0, 0.0))\n"
-"[/codeblock]\n"
-"[b]Note:[/b] In C#, the method name must be specified as snake_case if it is "
-"defined by a built-in Godot node. This doesn't apply to user-defined methods "
-"where you should use the same convention as in the C# source (typically "
-"PascalCase)."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Calls the [code]method[/code] on the object during idle time. This method "
-"supports a variable number of arguments, so parameters are passed as a comma "
-"separated list. Example:\n"
-"[codeblock]\n"
-"call_deferred(\"set\", \"position\", Vector2(42.0, 0.0))\n"
-"[/codeblock]\n"
-"[b]Note:[/b] In C#, the method name must be specified as snake_case if it is "
-"defined by a built-in Godot node. This doesn't apply to user-defined methods "
-"where you should use the same convention as in the C# source (typically "
-"PascalCase)."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Calls the [code]method[/code] on the object and returns the result. "
-"Contrarily to [method call], this method does not support a variable number "
-"of arguments but expects all parameters to be via a single [Array].\n"
-"[codeblock]\n"
-"callv(\"set\", [ \"position\", Vector2(42.0, 0.0) ])\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns [code]true[/code] if the object can translate strings. See [method "
-"set_message_translation] and [method tr]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Connects a [code]signal[/code] to a [code]method[/code] on a [code]target[/"
-"code] object. Pass optional [code]binds[/code] to the call as an [Array] of "
-"parameters. These parameters will be passed to the method after any "
-"parameter used in the call to [method emit_signal]. Use [code]flags[/code] "
-"to set deferred or one-shot connections. See [enum ConnectFlags] constants.\n"
-"A [code]signal[/code] can only be connected once to a [code]method[/code]. "
-"It will print an error if already connected, unless the signal was connected "
-"with [constant CONNECT_REFERENCE_COUNTED]. To avoid this, first, use [method "
-"is_connected] to check for existing connections.\n"
-"If the [code]target[/code] is destroyed in the game's lifecycle, the "
-"connection will be lost.\n"
-"Examples:\n"
-"[codeblock]\n"
-"connect(\"pressed\", self, \"_on_Button_pressed\") # BaseButton signal\n"
-"connect(\"text_entered\", self, \"_on_LineEdit_text_entered\") # LineEdit "
-"signal\n"
-"connect(\"hit\", self, \"_on_Player_hit\", [ weapon_type, damage ]) # User-"
-"defined signal\n"
-"[/codeblock]\n"
-"An example of the relationship between [code]binds[/code] passed to [method "
-"connect] and parameters used when calling [method emit_signal]:\n"
-"[codeblock]\n"
-"connect(\"hit\", self, \"_on_Player_hit\", [ weapon_type, damage ]) # "
-"weapon_type and damage are passed last\n"
-"emit_signal(\"hit\", \"Dark lord\", 5) # \"Dark lord\" and 5 are passed "
-"first\n"
-"func _on_Player_hit(hit_by, level, weapon_type, damage):\n"
-"    print(\"Hit by %s (lvl %d) with weapon %s for %d damage\" % [hit_by, "
-"level, weapon_type, damage])\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Disconnects a [code]signal[/code] from a [code]method[/code] on the given "
-"[code]target[/code].\n"
-"If you try to disconnect a connection that does not exist, the method will "
-"print an error. Use [method is_connected] to ensure that the connection "
-"exists."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Emits the given [code]signal[/code]. The signal must exist, so it should be "
-"a built-in signal of this class or one of its parent classes, or a user-"
-"defined signal. This method supports a variable number of arguments, so "
-"parameters are passed as a comma separated list. Example:\n"
-"[codeblock]\n"
-"emit_signal(\"hit\", weapon_type, damage)\n"
-"emit_signal(\"game_over\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Deletes the object from memory immediately. For [Node]s, you may want to use "
-"[method Node.queue_free] to queue the node for safe deletion at the end of "
-"the current frame.\n"
-"[b]Important:[/b] If you have a variable pointing to an object, it will "
-"[i]not[/i] be assigned to [code]null[/code] once the object is freed. "
-"Instead, it will point to a [i]previously freed instance[/i] and you should "
-"validate it with [method @GDScript.is_instance_valid] before attempting to "
-"call its methods or access its properties."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns the [Variant] value of the given [code]property[/code]. If the "
-"[code]property[/code] doesn't exist, this will return [code]null[/code].\n"
-"[b]Note:[/b] In C#, the property name must be specified as snake_case if it "
-"is defined by a built-in Godot node. This doesn't apply to user-defined "
-"properties where you should use the same convention as in the C# source "
-"(typically PascalCase)."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns the object's class as a [String]. See also [method is_class].\n"
-"[b]Note:[/b] [method get_class] does not take [code]class_name[/code] "
-"declarations into account. If the object has a [code]class_name[/code] "
-"defined, the base class name will be returned instead."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns an [Array] of dictionaries with information about signals that are "
-"connected to the object.\n"
-"Each [Dictionary] contains three String entries:\n"
-"- [code]source[/code] is a reference to the signal emitter.\n"
-"- [code]signal_name[/code] is the name of the connected signal.\n"
-"- [code]method_name[/code] is the name of the method to which the signal is "
-"connected."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Gets the object's property indexed by the given [NodePath]. The node path "
-"should be relative to the current object and can use the colon character "
-"([code]:[/code]) to access nested properties. Examples: [code]\"position:"
-"x\"[/code] or [code]\"material:next_pass:blend_mode\"[/code].\n"
-"[b]Note:[/b] Even though the method takes [NodePath] argument, it doesn't "
-"support actual paths to [Node]s in the scene tree, only colon-separated sub-"
-"property paths. For the purpose of nodes, use [method Node."
-"get_node_and_resource] instead."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns the object's unique instance ID.\n"
-"This ID can be saved in [EncodedObjectAsID], and can be used to retrieve the "
-"object instance with [method @GDScript.instance_from_id]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns the object's metadata entry for the given [code]name[/code].\n"
-"Throws error if the entry does not exist, unless [code]default[/code] is not "
-"[code]null[/code] (in which case the default value will be returned)."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Returns the object's metadata as a [PoolStringArray]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Returns the object's methods and their signatures as an [Array]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns the object's property list as an [Array] of dictionaries.\n"
-"Each property's [Dictionary] contain at least [code]name: String[/code] and "
-"[code]type: int[/code] (see [enum Variant.Type]) entries. Optionally, it can "
-"also include [code]hint: int[/code] (see [enum PropertyHint]), "
-"[code]hint_string: String[/code], and [code]usage: int[/code] (see [enum "
-"PropertyUsageFlags])."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns the object's [Script] instance, or [code]null[/code] if none is "
-"assigned."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Returns an [Array] of connections for the given [code]signal[/code]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Returns the list of signals as an [Array] of dictionaries."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns [code]true[/code] if a metadata entry is found with the given "
-"[code]name[/code]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns [code]true[/code] if the object contains the given [code]method[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Returns [code]true[/code] if the given [code]signal[/code] exists."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns [code]true[/code] if the given user-defined [code]signal[/code] "
-"exists. Only signals added using [method add_user_signal] are taken into "
-"account."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Returns [code]true[/code] if signal emission blocking is enabled."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns [code]true[/code] if the object inherits from the given [code]class[/"
-"code]. See also [method get_class].\n"
-"[b]Note:[/b] [method is_class] does not take [code]class_name[/code] "
-"declarations into account. If the object has a [code]class_name[/code] "
-"defined, [method is_class] will return [code]false[/code] for that name."
-msgstr ""
-
-#: doc/classes/Object.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if a connection exists for a given [code]signal[/"
-"code], [code]target[/code], and [code]method[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der [AABB] das Liniensegment zwischen "
-"[code]from[/code] und [code]to[/code] schneidet."
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns [code]true[/code] if the [method Node.queue_free] method was called "
-"for the object."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Send a given notification to the object, which will also trigger a call to "
-"the [method _notification] method of all classes that the object inherits "
-"from.\n"
-"If [code]reversed[/code] is [code]true[/code], [method _notification] is "
-"called first on the object's own class, and then up to its successive parent "
-"classes. If [code]reversed[/code] is [code]false[/code], [method "
-"_notification] is called first on the highest ancestor ([Object] itself), "
-"and then down to its successive inheriting classes."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Notify the editor that the property list has changed, so that editor plugins "
-"can take the new values into account. Does nothing on export builds."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Removes a given entry from the object's metadata. See also [method set_meta]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Assigns a new value to the given property. If the [code]property[/code] does "
-"not exist or the given value's type doesn't match, nothing will happen.\n"
-"[b]Note:[/b] In C#, the property name must be specified as snake_case if it "
-"is defined by a built-in Godot node. This doesn't apply to user-defined "
-"properties where you should use the same convention as in the C# source "
-"(typically PascalCase)."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "If set to [code]true[/code], signal emission is blocked."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Assigns a new value to the given property, after the current frame's physics "
-"step. This is equivalent to calling [method set] via [method call_deferred], "
-"i.e. [code]call_deferred(\"set\", property, value)[/code].\n"
-"[b]Note:[/b] In C#, the property name must be specified as snake_case if it "
-"is defined by a built-in Godot node. This doesn't apply to user-defined "
-"properties where you should use the same convention as in the C# source "
-"(typically PascalCase)."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Assigns a new value to the property identified by the [NodePath]. The node "
-"path should be relative to the current object and can use the colon "
-"character ([code]:[/code]) to access nested properties. Example:\n"
-"[codeblock]\n"
-"set_indexed(\"position\", Vector2(42, 0))\n"
-"set_indexed(\"position:y\", -10)\n"
-"print(position) # (42, -10)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Defines whether the object can translate strings (with calls to [method "
-"tr]). Enabled by default."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Adds, changes or removes a given entry in the object's metadata. Metadata "
-"are serialized and can take any [Variant] value.\n"
-"To remove a given entry from the object's metadata, use [method "
-"remove_meta]. Metadata is also removed if its value is set to [code]null[/"
-"code]. This means you can also use [code]set_meta(\"name\", null)[/code] to "
-"remove metadata for [code]\"name\"[/code]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Assigns a script to the object. Each object can have a single script "
-"assigned to it, which are used to extend its functionality.\n"
-"If the object already had a script, the previous script instance will be "
-"freed and its variables and state will be lost. The new script's [method "
-"_init] method will be called."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Returns a [String] representing the object. If not overridden, defaults to "
-"[code]\"[ClassName:RID]\"[/code].\n"
-"Override the method [method _to_string] to customize the [String] "
-"representation."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Translates a message using translation catalogs configured in the Project "
-"Settings.\n"
-"Only works if message translation is enabled (which it is by default), "
-"otherwise it returns the [code]message[/code] unchanged. See [method "
-"set_message_translation]."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Emitted whenever the object's script is changed."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Called right when the object is initialized. Not available in script."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Called before the object is about to be deleted."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Connects a signal in deferred mode. This way, signal emissions are stored in "
-"a queue, then set on idle time."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "Persisting connections are saved when the object is serialized to file."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid "One-shot connections disconnect themselves after emission."
-msgstr ""
-
-#: doc/classes/Object.xml
-msgid ""
-"Connect a signal as reference-counted. This means that a given signal can be "
-"connected several times to the same target, and will only be fully "
-"disconnected once no references are left."
-msgstr ""
-
-#: doc/classes/Occluder.xml
-msgid "Allows [OccluderShape]s to be used for occlusion culling."
-msgstr ""
-
-#: doc/classes/Occluder.xml
-msgid ""
-"[Occluder]s that are placed within your scene will automatically cull "
-"objects that are hidden from view by the occluder. This can increase "
-"performance by decreasing the amount of objects drawn.\n"
-"[Occluder]s are totally dynamic, you can move them as you wish. This means "
-"you can for example, place occluders on a moving spaceship, and have it "
-"occlude objects as it flies past.\n"
-"You can place a large number of [Occluder]s within a scene. As it would be "
-"counterproductive to cull against hundreds of occluders, the system will "
-"automatically choose a selection of these for active use during any given "
-"frame, based a screen space metric. Larger occluders are favored, as well as "
-"those close to the camera. Note that a small occluder close to the camera "
-"may be a better occluder in terms of screen space than a large occluder far "
-"in the distance.\n"
-"The type of occlusion primitive is determined by the [OccluderShape] that "
-"you add to the [Occluder]. Some [OccluderShape]s may allow more than one "
-"primitive in a single, node, for greater efficiency.\n"
-"Although [Occluder]s work in general use, they also become even more "
-"powerful when used in conjunction with the portal system. Occluders are "
-"placed in rooms (based on their origin), and can block portals (and thus "
-"entire rooms) as well as objects from rendering."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid "Defines a 2D polygon for LightOccluder2D."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid ""
-"Editor facility that helps you draw a 2D polygon used as resource for "
-"[LightOccluder2D]."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid ""
-"If [code]true[/code], closes the polygon. A closed OccluderPolygon2D "
-"occludes the light coming from any direction. An opened OccluderPolygon2D "
-"occludes the light only at its outline's direction."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid "The culling mode to use."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid ""
-"A [Vector2] array with the index for polygon's vertices positions.\n"
-"[b]Note:[/b] The returned value is a copy of the underlying array, rather "
-"than a reference."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid "Culling is disabled. See [member cull_mode]."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid ""
-"Culling is performed in the clockwise direction. See [member cull_mode]."
-msgstr ""
-
-#: doc/classes/OccluderPolygon2D.xml
-msgid ""
-"Culling is performed in the counterclockwise direction. See [member "
-"cull_mode]."
-msgstr ""
-
-#: doc/classes/OccluderShape.xml
-msgid ""
-"Base class for shapes used for occlusion culling by the [Occluder] node."
-msgstr ""
-
-#: doc/classes/OccluderShape.xml
-msgid "[Occluder]s can use any primitive shape derived from [OccluderShape]."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid "Polygon occlusion primitive for use with the [Occluder] node."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid ""
-"[OccluderShape]s are resources used by [Occluder] nodes, allowing geometric "
-"occlusion culling.\n"
-"The polygon must be a convex polygon. The polygon points can be created and "
-"deleted either in the Editor inspector or by calling "
-"[code]set_polygon_points[/code]. The points of the edges can be set by "
-"dragging the handles in the Editor viewport.\n"
-"Additionally each polygon occluder can optionally support a single hole. If "
-"you add at least three points in the Editor inspector to the hole, you can "
-"drag the edge points of the hole in the Editor viewport.\n"
-"In general, the lower the number of edges in polygons and holes, the faster "
-"the system will operate at runtime, so in most cases you will want to use 4 "
-"points for each."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid "Sets an individual hole point position."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid "Sets an individual polygon point position."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid "Allows changing the hole geometry from code."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid "Allows changing the polygon geometry from code."
-msgstr ""
-
-#: doc/classes/OccluderShapePolygon.xml
-msgid ""
-"Specifies whether the occluder should operate from both sides. If "
-"[code]false[/code], the occluder will operate one way only."
-msgstr ""
-
-#: doc/classes/OccluderShapeSphere.xml
-msgid "Spherical occlusion primitive for use with the [Occluder] node."
-msgstr ""
-
-#: doc/classes/OccluderShapeSphere.xml
-msgid ""
-"[OccluderShape]s are resources used by [Occluder] nodes, allowing geometric "
-"occlusion culling.\n"
-"This shape can include multiple spheres. These can be created and deleted "
-"either in the Editor inspector or by calling [code]set_spheres[/code]. The "
-"sphere positions can be set by dragging the handle in the Editor viewport. "
-"The radius can be set with the smaller handle."
-msgstr ""
-
-#: doc/classes/OccluderShapeSphere.xml
-msgid "Sets an individual sphere's position."
-msgstr ""
-
-#: doc/classes/OccluderShapeSphere.xml
-msgid "Sets an individual sphere's radius."
-msgstr ""
-
-#: doc/classes/OccluderShapeSphere.xml
-msgid ""
-"The sphere data can be accessed as an array of [Plane]s. The position of "
-"each sphere is stored in the [code]normal[/code], and the radius is stored "
-"in the [code]d[/code] value of the plane."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid "Omnidirectional light, such as a light bulb or a candle."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid ""
-"An Omnidirectional light is a type of [Light] that emits light in all "
-"directions. The light is attenuated by distance and this attenuation can be "
-"configured by changing its energy, radius, and attenuation parameters.\n"
-"[b]Note:[/b] By default, only 32 OmniLights may affect a single mesh "
-"[i]resource[/i] at once. Consider splitting your level into several meshes "
-"to decrease the likelihood that more than 32 lights will affect the same "
-"mesh resource. Splitting the level mesh will also improve frustum culling "
-"effectiveness, leading to greater performance. If you need to use more "
-"lights per mesh, you can increase [member ProjectSettings.rendering/limits/"
-"rendering/max_lights_per_object] at the cost of shader compilation times."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid ""
-"The light's attenuation (drop-off) curve. A number of presets are available "
-"in the [b]Inspector[/b] by right-clicking the curve."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid ""
-"The light's radius. Note that the effectively lit area may appear to be "
-"smaller depending on the [member omni_attenuation] in use. No matter the "
-"[member omni_attenuation] in use, the light will never reach anything "
-"outside this radius.\n"
-"[b]Note:[/b] [member omni_range] is not affected by [member Spatial.scale] "
-"(the light's scale or its parent's scale)."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid "See [enum ShadowDetail]."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid ""
-"The shadow rendering mode to use for this [OmniLight]. See [enum "
-"ShadowMode].\n"
-"[b]Note:[/b] In GLES2, [constant SHADOW_CUBE] is only supported on GPUs that "
-"feature support for depth cubemaps. Old GPUs such as the Radeon HD 4000 "
-"series don't support cubemap shadows and will fall back to dual paraboloid "
-"shadows as a result."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid ""
-"Shadows are rendered to a dual-paraboloid texture. Faster than [constant "
-"SHADOW_CUBE], but lower-quality."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid ""
-"Shadows are rendered to a cubemap. Slower than [constant "
-"SHADOW_DUAL_PARABOLOID], but higher-quality. Only supported on GPUs that "
-"feature support for depth cubemaps."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid "Use more detail vertically when computing the shadow."
-msgstr ""
-
-#: doc/classes/OmniLight.xml
-msgid "Use more detail horizontally when computing the shadow."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid "Noise generator based on Open Simplex."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"This resource allows you to configure and sample a fractal noise space. Here "
-"is a brief usage example that configures an OpenSimplexNoise and gets "
-"samples at various positions and dimensions:\n"
-"[codeblock]\n"
-"var noise = OpenSimplexNoise.new()\n"
-"\n"
-"# Configure\n"
-"noise.seed = randi()\n"
-"noise.octaves = 4\n"
-"noise.period = 20.0\n"
-"noise.persistence = 0.8\n"
-"\n"
-"# Sample\n"
-"print(\"Values:\")\n"
-"print(noise.get_noise_2d(1.0, 1.0))\n"
-"print(noise.get_noise_3d(0.5, 3.0, 15.0))\n"
-"print(noise.get_noise_4d(0.5, 1.9, 4.7, 0.0))\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Generate a noise image in [constant Image.FORMAT_L8] format with the "
-"requested [code]width[/code] and [code]height[/code], based on the current "
-"noise parameters. If [code]noise_offset[/code] is specified, then the offset "
-"value is used as the coordinates of the top-left corner of the generated "
-"noise."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Returns the 1D noise value [code][-1,1][/code] at the given x-coordinate.\n"
-"[b]Note:[/b] This method actually returns the 2D noise value [code][-1,1][/"
-"code] with fixed y-coordinate value 0.0."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid "Returns the 2D noise value [code][-1,1][/code] at the given position."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid "Returns the 3D noise value [code][-1,1][/code] at the given position."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid "Returns the 4D noise value [code][-1,1][/code] at the given position."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Generate a tileable noise image in [constant Image.FORMAT_L8] format, based "
-"on the current noise parameters. Generated seamless images are always square "
-"([code]size[/code] × [code]size[/code]).\n"
-"[b]Note:[/b] Seamless noise has a lower contrast compared to non-seamless "
-"noise. This is due to the way noise uses higher dimensions for generating "
-"seamless noise."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid "Difference in period between [member octaves]."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Number of OpenSimplex noise layers that are sampled to get the fractal "
-"noise. Higher values result in more detailed noise but take more time to "
-"generate.\n"
-"[b]Note:[/b] The maximum allowed value is 9."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Period of the base octave. A lower period results in a higher-frequency "
-"noise (more value changes across the same distance)."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Contribution factor of the different octaves. A [code]persistence[/code] "
-"value of 1 means all the octaves have the same contribution, a value of 0.5 "
-"means each octave contributes half as much as the previous one."
-msgstr ""
-
-#: modules/opensimplex/doc_classes/OpenSimplexNoise.xml
-msgid ""
-"Seed used to generate random values, different seeds will generate different "
-"noise maps."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Button control that provides selectable options when pressed."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"OptionButton is a type button that provides a selectable list of items when "
-"pressed. The item selected becomes the \"current\" item and is displayed as "
-"the button text.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Adds an item, with a [code]texture[/code] icon, text [code]label[/code] and "
-"(optionally) [code]id[/code]. If no [code]id[/code] is passed, the item "
-"index will be used as the item's ID. New items are appended at the end."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Adds an item, with text [code]label[/code] and (optionally) [code]id[/code]. "
-"If no [code]id[/code] is passed, the item index will be used as the item's "
-"ID. New items are appended at the end."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Adds a separator to the list of items. Separators help to group items. "
-"Separator also takes up an index and is appended at the end."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Clears all the items in the [OptionButton]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Returns the amount of items in the OptionButton, including separators."
-msgstr ""
-
-#: doc/classes/OptionButton.xml doc/classes/PopupMenu.xml
-msgid "Returns the icon of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Returns the ID of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Returns the index of the item with the given [code]id[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Retrieves the metadata of an item. Metadata may be any type and can be used "
-"to store extra information about an item, such as an external string ID."
-msgstr ""
-
-#: doc/classes/OptionButton.xml doc/classes/PopupMenu.xml
-msgid "Returns the text of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-#, fuzzy
-msgid "Returns the tooltip of the item at index [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/OptionButton.xml
-#, fuzzy
-msgid ""
-"Returns the ID of the selected item, or [code]-1[/code] if no item is "
-"selected."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Gets the metadata of the selected item. Metadata for items can be set using "
-"[method set_item_metadata]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Returns [code]true[/code] if the item at index [code]idx[/code] is disabled."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Removes the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Selects an item by index and makes it the current item. This will work even "
-"if the item is disabled.\n"
-"Passing [code]-1[/code] as the index deselects any currently selected item."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Sets whether the item at index [code]idx[/code] is disabled.\n"
-"Disabled items are drawn differently in the dropdown and are not selectable "
-"by the user. If the current selected item is set as disabled, it will remain "
-"selected."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Sets the icon of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Sets the ID of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Sets the metadata of an item. Metadata may be of any type and can be used to "
-"store extra information about an item, such as an external string ID."
-msgstr ""
-
-#: doc/classes/OptionButton.xml doc/classes/PopupMenu.xml
-msgid "Sets the text of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-#, fuzzy
-msgid "Sets the tooltip of the item at index [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"The index of the currently selected item, or [code]-1[/code] if no item is "
-"selected."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Emitted when the user navigates to an item using the [code]ui_up[/code] or "
-"[code]ui_down[/code] actions. The index of the item selected is passed as "
-"argument."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Emitted when the current item has been changed by the user. The index of the "
-"item selected is passed as argument."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Default text [Color] of the [OptionButton]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Text [Color] used when the [OptionButton] is disabled."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"Text [Color] used when the [OptionButton] is focused. Only replaces the "
-"normal text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Text [Color] used when the [OptionButton] is being hovered."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Text [Color] used when the [OptionButton] is being pressed."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"The horizontal space between the arrow icon and the right edge of the button."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "The horizontal space between [OptionButton]'s icon and text."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "[Font] of the [OptionButton]'s text."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "The arrow icon to be drawn on the right end of the button."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "[StyleBox] used when the [OptionButton] is disabled."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid ""
-"[StyleBox] used when the [OptionButton] is focused. It is displayed over the "
-"current [StyleBox], so using [StyleBoxEmpty] will just disable the focus "
-"visual effect."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "[StyleBox] used when the [OptionButton] is being hovered."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "Default [StyleBox] for the [OptionButton]."
-msgstr ""
-
-#: doc/classes/OptionButton.xml
-msgid "[StyleBox] used when the [OptionButton] is being pressed."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Operating System functions."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Operating System functions. OS wraps the most common functionality to "
-"communicate with the host operating system, such as the clipboard, video "
-"driver, date and time, timers, environment variables, execution of binaries, "
-"command line, etc."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Displays a modal dialog box using the host OS' facilities. Execution is "
-"blocked until the dialog is closed."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if the host OS allows drawing."
-msgstr "Gibt [code]true[/code] zurück, wenn der [AABB] einen Punkt enthält."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the current host platform is using multiple "
-"threads."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Centers the window on the screen if in windowed mode."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Shuts down system MIDI driver.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Crashes the engine (or the editor if called within a [code]tool[/code] "
-"script). This should [i]only[/i] be used for testing the system's crash "
-"handler, not for any other purpose. For general error reporting, use (in "
-"order of preference) [method @GDScript.assert], [method @GDScript."
-"push_error] or [method alert]. See also [method kill]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Delays execution of the current thread by [code]msec[/code] milliseconds. "
-"[code]msec[/code] must be greater than or equal to [code]0[/code]. "
-"Otherwise, [method delay_msec] will do nothing and will print an error "
-"message.\n"
-"[b]Note:[/b] [method delay_msec] is a [i]blocking[/i] way to delay code "
-"execution. To delay code execution in a non-blocking way, see [method "
-"SceneTree.create_timer]. Yielding with [method SceneTree.create_timer] will "
-"delay the execution of code placed below the [code]yield[/code] without "
-"affecting the rest of the project (or editor, for [EditorPlugin]s and "
-"[EditorScript]s).\n"
-"[b]Note:[/b] When [method delay_msec] is called on the main thread, it will "
-"freeze the project and will prevent it from redrawing and registering input "
-"until the delay has passed. When using [method delay_msec] as part of an "
-"[EditorPlugin] or [EditorScript], it will freeze the editor but won't freeze "
-"the project if it is currently running (since the project is an independent "
-"child process)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Delays execution of the current thread by [code]usec[/code] microseconds. "
-"[code]usec[/code] must be greater than or equal to [code]0[/code]. "
-"Otherwise, [method delay_usec] will do nothing and will print an error "
-"message.\n"
-"[b]Note:[/b] [method delay_usec] is a [i]blocking[/i] way to delay code "
-"execution. To delay code execution in a non-blocking way, see [method "
-"SceneTree.create_timer]. Yielding with [method SceneTree.create_timer] will "
-"delay the execution of code placed below the [code]yield[/code] without "
-"affecting the rest of the project (or editor, for [EditorPlugin]s and "
-"[EditorScript]s).\n"
-"[b]Note:[/b] When [method delay_usec] is called on the main thread, it will "
-"freeze the project and will prevent it from redrawing and registering input "
-"until the delay has passed. When using [method delay_usec] as part of an "
-"[EditorPlugin] or [EditorScript], it will freeze the editor but won't freeze "
-"the project if it is currently running (since the project is an independent "
-"child process)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Dumps the memory allocation ringlist to a file (only works in debug).\n"
-"Entry format per line: \"Address - Size - Description\"."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Dumps all used resources to file (only works in debug).\n"
-"Entry format per line: \"Resource Type : Resource Location\".\n"
-"At the end of the file is a statistic of all used Resource Types."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Execute the file at the given path with the arguments passed as an array of "
-"strings. Platform path resolution will take place. The resolved file must "
-"exist and be executable.\n"
-"The arguments are used in the given order and separated by a space, so "
-"[code]OS.execute(\"ping\", [\"-w\", \"3\", \"godotengine.org\"], false)[/"
-"code] will resolve to [code]ping -w 3 godotengine.org[/code] in the system's "
-"shell.\n"
-"This method has slightly different behavior based on whether the "
-"[code]blocking[/code] mode is enabled.\n"
-"If [code]blocking[/code] is [code]true[/code], the Godot thread will pause "
-"its execution while waiting for the process to terminate. The shell output "
-"of the process will be written to the [code]output[/code] array as a single "
-"string. When the process terminates, the Godot thread will resume "
-"execution.\n"
-"If [code]blocking[/code] is [code]false[/code], the Godot thread will "
-"continue while the new process runs. It is not possible to retrieve the "
-"shell output in non-blocking mode, so [code]output[/code] will be empty.\n"
-"On Windows, if [code]open_console[/code] is [code]true[/code] and process is "
-"console app, new terminal window will be opened, it's ignored on other "
-"platforms.\n"
-"The return value also depends on the blocking mode. When blocking, the "
-"method will return an exit code of the process. When non-blocking, the "
-"method returns a process ID, which you can use to monitor the process (and "
-"potentially terminate it with [method kill]). If the process forking (non-"
-"blocking) or opening (blocking) fails, the method will return [code]-1[/"
-"code] or another exit code.\n"
-"Example of blocking mode and retrieving the shell output:\n"
-"[codeblock]\n"
-"var output = []\n"
-"var exit_code = OS.execute(\"ls\", [\"-l\", \"/tmp\"], true, output)\n"
-"[/codeblock]\n"
-"Example of non-blocking mode, running another instance of the project and "
-"storing its process ID:\n"
-"[codeblock]\n"
-"var pid = OS.execute(OS.get_executable_path(), [], false)\n"
-"[/codeblock]\n"
-"If you wish to access a shell built-in or perform a composite command, a "
-"platform-specific shell can be invoked. For example:\n"
-"[codeblock]\n"
-"OS.execute(\"CMD.exe\", [\"/C\", \"cd %TEMP% && dir\"], true, output)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This method is implemented on Android, iOS, Linux, macOS and "
-"Windows.\n"
-"[b]Note:[/b] To execute a Windows command interpreter built-in command, "
-"specify [code]cmd.exe[/code] in [code]path[/code], [code]/c[/code] as the "
-"first argument, and the desired command as the second argument.\n"
-"[b]Note:[/b] To execute a PowerShell built-in command, specify "
-"[code]powershell.exe[/code] in [code]path[/code], [code]-Command[/code] as "
-"the first argument, and the desired command as the second argument.\n"
-"[b]Note:[/b] To execute a Unix shell built-in command, specify shell "
-"executable name in [code]path[/code], [code]-c[/code] as the first argument, "
-"and the desired command as the second argument."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the scancode of the given string (e.g. \"Escape\")."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the total number of available audio drivers."
-msgstr "Gibt die Anzahl der Punkte auf der Blend-Achse zurück."
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the audio driver name for the given index."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the [i]global[/i] cache data directory according to the operating "
-"system's standards. On Linux, this path can be overridden by setting the "
-"[code]XDG_CACHE_HOME[/code] environment variable before starting the "
-"project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot "
-"projects[/url] in the documentation for more information. See also [method "
-"get_config_dir] and [method get_data_dir].\n"
-"Not to be confused with [method get_user_data_dir], which returns the "
-"[i]project-specific[/i] user data path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the command-line arguments passed to the engine.\n"
-"Command-line arguments can be written in any form, including both [code]--"
-"key value[/code] and [code]--key=value[/code] forms so they can be properly "
-"parsed, as long as custom command-line arguments do not conflict with engine "
-"arguments.\n"
-"You can also incorporate environment variables using the [method "
-"get_environment] method.\n"
-"You can set [member ProjectSettings.editor/main_run_args] to define command-"
-"line arguments to be passed by the editor when running the project.\n"
-"Here's a minimal example on how to parse command-line arguments into a "
-"dictionary using the [code]--key=value[/code] form for arguments:\n"
-"[codeblock]\n"
-"var arguments = {}\n"
-"for argument in OS.get_cmdline_args():\n"
-"    if argument.find(\"=\") > -1:\n"
-"        var key_value = argument.split(\"=\")\n"
-"        arguments[key_value[0].lstrip(\"--\")] = key_value[1]\n"
-"    else:\n"
-"        # Options without an argument will be present in the dictionary,\n"
-"        # with the value set to an empty string.\n"
-"        arguments[argument.lstrip(\"--\")] = \"\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the [i]global[/i] user configuration directory according to the "
-"operating system's standards. On Linux, this path can be overridden by "
-"setting the [code]XDG_CONFIG_HOME[/code] environment variable before "
-"starting the project. See [url=$DOCS_URL/tutorials/io/data_paths.html]File "
-"paths in Godot projects[/url] in the documentation for more information. See "
-"also [method get_cache_dir] and [method get_data_dir].\n"
-"Not to be confused with [method get_user_data_dir], which returns the "
-"[i]project-specific[/i] user data path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns an array of MIDI device names.\n"
-"The returned array will be empty if the system MIDI driver has not "
-"previously been initialised with [method open_midi_inputs].\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the currently used video driver, using one of the values from [enum "
-"VideoDriver]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the [i]global[/i] user data directory according to the operating "
-"system's standards. On Linux, this path can be overridden by setting the "
-"[code]XDG_DATA_HOME[/code] environment variable before starting the project. "
-"See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths in Godot "
-"projects[/url] in the documentation for more information. See also [method "
-"get_cache_dir] and [method get_config_dir].\n"
-"Not to be confused with [method get_user_data_dir], which returns the "
-"[i]project-specific[/i] user data path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Deprecated, use [method Time.get_date_dict_from_system] instead.\n"
-"Returns current date as a dictionary of keys: [code]year[/code], "
-"[code]month[/code], [code]day[/code], [code]weekday[/code], [code]dst[/code] "
-"(Daylight Savings Time)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Deprecated, use [method Time.get_datetime_dict_from_system] instead.\n"
-"Returns current datetime as a dictionary of keys: [code]year[/code], "
-"[code]month[/code], [code]day[/code], [code]weekday[/code], [code]dst[/code] "
-"(Daylight Savings Time), [code]hour[/code], [code]minute[/code], "
-"[code]second[/code]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Deprecated, use [method Time.get_datetime_dict_from_unix_time] instead.\n"
-"Gets a dictionary of time values corresponding to the given UNIX epoch time "
-"(in seconds).\n"
-"The returned Dictionary's values will be the same as [method get_datetime], "
-"with the exception of Daylight Savings Time as it cannot be determined from "
-"the epoch."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns an [Array] of [Rect2], each of which is the bounding rectangle for a "
-"display cutout or notch. These are non-functional areas on edge-to-edge "
-"screens used by cameras and sensors. Returns an empty array if the device "
-"does not have cutouts. See also [method get_window_safe_area].\n"
-"[b]Note:[/b] Currently only implemented on Android. Other platforms will "
-"return an empty array even if they do have display cutouts or notches."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Returns the total amount of dynamic memory used (only works in debug)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the value of an environment variable. Returns an empty string if the "
-"environment variable doesn't exist.\n"
-"[b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment "
-"variable names are case-sensitive on all platforms except Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Returns the path to the current engine executable."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"With this function, you can get the list of dangerous permissions that have "
-"been granted to the Android application.\n"
-"[b]Note:[/b] This method is implemented on Android."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the IME cursor position (the currently-edited portion of the string) "
-"relative to the characters in the composition string.\n"
-"[constant MainLoop.NOTIFICATION_OS_IME_UPDATE] is sent to the application to "
-"notify it of changes to the IME cursor position.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the IME intermediate composition string.\n"
-"[constant MainLoop.NOTIFICATION_OS_IME_UPDATE] is sent to the application to "
-"notify it of changes to the IME composition string.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the current latin keyboard variant as a String.\n"
-"Possible return values are: [code]\"QWERTY\"[/code], [code]\"AZERTY\"[/"
-"code], [code]\"QZERTY\"[/code], [code]\"DVORAK\"[/code], [code]\"NEO\"[/"
-"code], [code]\"COLEMAK\"[/code] or [code]\"ERROR\"[/code].\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows. Returns "
-"[code]\"QWERTY\"[/code] on unsupported platforms."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the host OS locale as a string of the form "
-"[code]language_Script_COUNTRY_VARIANT@extra[/code]. If you want only the "
-"language code and not the fully specified locale from the OS, you can use "
-"[method get_locale_language].\n"
-"[code]language[/code] - 2 or 3-letter [url=https://en.wikipedia.org/wiki/"
-"List_of_ISO_639-1_codes]language code[/url], in lower case.\n"
-"[code]Script[/code] - optional, 4-letter [url=https://en.wikipedia.org/wiki/"
-"ISO_15924]script code[/url], in title case.\n"
-"[code]COUNTRY[/code] - optional, 2 or 3-letter [url=https://en.wikipedia.org/"
-"wiki/ISO_3166-1]country code[/url], in upper case.\n"
-"[code]VARIANT[/code] - optional, language variant, region and sort order. "
-"Variant can have any number of underscored keywords.\n"
-"[code]extra[/code] - optional, semicolon separated list of additional key "
-"words. Currency, calendar, sort order and numbering system information."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the host OS locale's 2 or 3-letter [url=https://en.wikipedia.org/"
-"wiki/List_of_ISO_639-1_codes]language code[/url] as a string which should be "
-"consistent on all platforms. This is equivalent to extracting the "
-"[code]language[/code] part of the [method get_locale] string.\n"
-"This can be used to narrow down fully specified locale strings to only the "
-"\"common\" language code, when you don't need the additional information "
-"about country code or variants. For example, for a French Canadian user with "
-"[code]fr_CA[/code] locale, this would return [code]fr[/code]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the ID of the main thread. See [method get_thread_caller_id].\n"
-"[b]Note:[/b] Thread IDs are not deterministic and may be reused across "
-"application restarts."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the model name of the current device.\n"
-"[b]Note:[/b] This method is implemented on Android and iOS. Returns "
-"[code]\"GenericDevice\"[/code] on unsupported platforms."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the name of the host OS. Possible values are: [code]\"Android\"[/"
-"code], [code]\"iOS\"[/code], [code]\"HTML5\"[/code], [code]\"OSX\"[/code], "
-"[code]\"Server\"[/code], [code]\"Windows\"[/code], [code]\"UWP\"[/code], "
-"[code]\"X11\"[/code]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns internal structure pointers for use in GDNative plugins.\n"
-"[b]Note:[/b] This method is implemented on Linux and Windows (other OSs will "
-"soon be supported)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the amount of battery left in the device as a percentage. Returns "
-"[code]-1[/code] if power state is unknown.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns an estimate of the time left in seconds before the device runs out "
-"of battery. Returns [code]-1[/code] if power state is unknown.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the current state of the device regarding battery and power. See "
-"[enum PowerState] constants.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the project's process ID.\n"
-"[b]Note:[/b] This method is implemented on Android, iOS, Linux, macOS and "
-"Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the number of [i]logical[/i] CPU cores available on the host "
-"machine. On CPUs with HyperThreading enabled, this number will be greater "
-"than the number of [i]physical[/i] CPU cores."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the name of the CPU model on the host machine (e.g. \"Intel(R) "
-"Core(TM) i7-6700K CPU @ 4.00GHz\").\n"
-"[b]Note:[/b] This method is only implemented on Windows, macOS, Linux and "
-"iOS. On Android, HTML5 and UWP, [method get_processor_name] returns an empty "
-"string."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the window size including decorations like window borders."
-msgstr "Gibt das Endnode des übergebenen Übergangs zurück."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the given scancode as a string (e.g. Return values: "
-"[code]\"Escape\"[/code], [code]\"Shift+Escape\"[/code]).\n"
-"See also [member InputEventKey.scancode] and [method InputEventKey."
-"get_scancode_with_modifiers]."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the number of displays attached to the host machine."
-msgstr "Gibt die Anzahl der Punkte im Überblendungsbereich zurück."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the dots per inch density of the specified screen. If [code]screen[/"
-"code] is [code]-1[/code] (the default value), the current screen will be "
-"used.\n"
-"[b]Note:[/b] On macOS, returned value is inaccurate if fractional display "
-"scaling mode is used.\n"
-"[b]Note:[/b] On Android devices, the actual screen densities are grouped "
-"into six generalized densities:\n"
-"[codeblock]\n"
-"   ldpi - 120 dpi\n"
-"   mdpi - 160 dpi\n"
-"   hdpi - 240 dpi\n"
-"  xhdpi - 320 dpi\n"
-" xxhdpi - 480 dpi\n"
-"xxxhdpi - 640 dpi\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This method is implemented on Android, Linux, macOS and "
-"Windows. Returns [code]72[/code] on unsupported platforms."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Return the greatest scale factor of all screens.\n"
-"[b]Note:[/b] On macOS returned value is [code]2.0[/code] if there is at "
-"least one hiDPI (Retina) screen in the system, and [code]1.0[/code] in all "
-"other cases.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the position of the specified screen by index. If [code]screen[/"
-"code] is [code]-1[/code] (the default value), the current screen will be "
-"used."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the current refresh rate of the specified screen. If [code]screen[/"
-"code] is [code]-1[/code] (the default value), the current screen will be "
-"used.\n"
-"[b]Note:[/b] Returns [code]-1.0[/code] if Godot fails to find the refresh "
-"rate for the specified screen. On HTML5, [method get_screen_refresh_rate] "
-"will always return [code]-1.0[/code] as there is no way to retrieve the "
-"refresh rate on that platform.\n"
-"To fallback to a default refresh rate if the method fails, try:\n"
-"[codeblock]\n"
-"var refresh_rate = OS.get_screen_refresh_rate()\n"
-"if refresh_rate < 0:\n"
-"    refresh_rate = 60.0\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Return the scale factor of the specified screen by index. If [code]screen[/"
-"code] is [code]-1[/code] (the default value), the current screen will be "
-"used.\n"
-"[b]Note:[/b] On macOS returned value is [code]2.0[/code] for hiDPI (Retina) "
-"screen, and [code]1.0[/code] for all other cases.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the dimensions in pixels of the specified screen. If [code]screen[/"
-"code] is [code]-1[/code] (the default value), the current screen will be "
-"used."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the amount of time in milliseconds it took for the boot logo to "
-"appear."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Returns the maximum amount of static memory used (only works in debug)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the amount of static memory being used by the program in bytes (only "
-"works in debug)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the actual path to commonly used folders across different platforms. "
-"Available locations are specified in [enum SystemDir].\n"
-"[b]Note:[/b] This method is implemented on Android, Linux, macOS and "
-"Windows.\n"
-"[b]Note:[/b] Shared storage is implemented on Android and allows to "
-"differentiate between app specific and shared directories. Shared "
-"directories have additional restrictions on Android."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the epoch time of the operating system in milliseconds."
-msgstr "Liefert die Länge des Audio Streams in Sekunden zurück."
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the epoch time of the operating system in seconds."
-msgstr "Liefert die Länge des Audio Streams in Sekunden zurück."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the total number of available tablet drivers.\n"
-"[b]Note:[/b] This method is implemented on Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the tablet driver name for the given index.\n"
-"[b]Note:[/b] This method is implemented on Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the ID of the current thread. This can be used in logs to ease "
-"debugging of multi-threaded applications.\n"
-"[b]Note:[/b] Thread IDs are not deterministic and may be reused across "
-"application restarts."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Deprecated, use [method Time.get_ticks_msec] instead.\n"
-"Returns the amount of time passed in milliseconds since the engine started."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Deprecated, use [method Time.get_ticks_usec] instead.\n"
-"Returns the amount of time passed in microseconds since the engine started."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Deprecated, use [method Time.get_time_dict_from_system] instead.\n"
-"Returns current time as a dictionary of keys: hour, minute, second."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the current time zone as a dictionary with the keys: bias and name."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns a string that is unique to the device.\n"
-"[b]Note:[/b] This string may change without notice if the user reinstalls/"
-"upgrades their operating system or changes their hardware. This means it "
-"should generally not be used to encrypt persistent data as the data saved "
-"before an unexpected ID change would become inaccessible. The returned "
-"string may also be falsified using external programs, so do not rely on the "
-"string returned by [method get_unique_id] for security purposes.\n"
-"[b]Note:[/b] Returns an empty string on HTML5 and UWP, as this method isn't "
-"implemented on those platforms yet."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the current UNIX epoch timestamp in seconds.\n"
-"[b]Important:[/b] This is the system clock that the user can manually set. "
-"[b]Never use[/b] this method for precise time calculation since its results "
-"are also subject to automatic adjustments by the operating system. [b]Always "
-"use[/b] [method get_ticks_usec] or [method get_ticks_msec] for precise time "
-"calculation instead, since they are guaranteed to be monotonic (i.e. never "
-"decrease).\n"
-"[b]Note:[/b] To get a floating point timestamp with sub-second precision, "
-"use [method Time.get_unix_time_from_system]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Gets an epoch time value from a dictionary of time values.\n"
-"[code]datetime[/code] must be populated with the following keys: [code]year[/"
-"code], [code]month[/code], [code]day[/code], [code]hour[/code], "
-"[code]minute[/code], [code]second[/code].\n"
-"If the dictionary is empty [code]0[/code] is returned. If some keys are "
-"omitted, they default to the equivalent values for the UNIX epoch timestamp "
-"0 (1970-01-01 at 00:00:00 UTC).\n"
-"You can pass the output from [method get_datetime_from_unix_time] directly "
-"into this function. Daylight Savings Time ([code]dst[/code]), if present, is "
-"ignored."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the absolute directory path where user data is written ([code]user://"
-"[/code]).\n"
-"On Linux, this is [code]~/.local/share/godot/app_userdata/[project_name][/"
-"code], or [code]~/.local/share/[custom_name][/code] if "
-"[code]use_custom_user_dir[/code] is set.\n"
-"On macOS, this is [code]~/Library/Application Support/Godot/app_userdata/"
-"[project_name][/code], or [code]~/Library/Application Support/[custom_name][/"
-"code] if [code]use_custom_user_dir[/code] is set.\n"
-"On Windows, this is [code]%APPDATA%\\Godot\\app_userdata\\[project_name][/"
-"code], or [code]%APPDATA%\\[custom_name][/code] if "
-"[code]use_custom_user_dir[/code] is set. [code]%APPDATA%[/code] expands to "
-"[code]%USERPROFILE%\\AppData\\Roaming[/code].\n"
-"If the project name is empty, [code]user://[/code] falls back to [code]res://"
-"[/code].\n"
-"Not to be confused with [method get_data_dir], which returns the [i]global[/"
-"i] (non-project-specific) user data directory."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns the number of video drivers supported on the current platform."
-msgstr "Gibt die Anzahl der Punkte auf der Blend-Achse zurück."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the name of the video driver matching the given [code]driver[/code] "
-"index. This index is a value from [enum VideoDriver], and you can use "
-"[method get_current_video_driver] to get the current backend's index."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the on-screen keyboard's height in pixels. Returns 0 if there is no "
-"keyboard or if it is currently hidden."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns unobscured area of the window where interactive controls should be "
-"rendered."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Add a new item with text \"label\" to global menu. Use \"_dock\" menu to add "
-"item to the macOS dock icon menu.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Add a separator between items. Separators also occupy an index.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Clear the global menu, in effect removing all items.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Removes the item at index \"idx\" from the global menu. Note that the "
-"indexes of items after the removed item are going to be shifted by one.\n"
-"[b]Note:[/b] This method is implemented on macOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if there is content on the clipboard."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Graph das übergebene Node enthält."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the environment variable with the name "
-"[code]variable[/code] exists.\n"
-"[b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment "
-"variable names are case-sensitive on all platforms except Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the feature for the given feature tag is "
-"supported in the currently running instance, depending on the platform, "
-"build etc. Can be used to check whether you're currently running a debug "
-"build, on a certain platform or arch, etc. Refer to the [url=$DOCS_URL/"
-"tutorials/export/feature_tags.html]Feature Tags[/url] documentation for more "
-"details.\n"
-"[b]Note:[/b] Tag names are case-sensitive."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the device has a touchscreen or emulates one."
-msgstr "Liefert [code]true[/code] wenn das [Rect2i] leer ist."
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the platform has a virtual keyboard, "
-"[code]false[/code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn der Skript Bereich lädt, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/OS.xml
-msgid "Hides the virtual keyboard if it is shown, does nothing otherwise."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the Godot binary used to run the project is a "
-"[i]debug[/i] export template, or when running in the editor.\n"
-"Returns [code]false[/code] if the Godot binary used to run the project is a "
-"[i]release[/i] export template.\n"
-"To check whether the Godot binary used to run the project is an export "
-"template (debug or release), use [code]OS.has_feature(\"standalone\")[/code] "
-"instead."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the [b]OK[/b] button should appear on the left "
-"and [b]Cancel[/b] on the right."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn die Mono Laufzeit initialisiert ist, "
-"ansonsten [code]false[/code]."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the child process ID ([code]pid[/code]) is "
-"still running or [code]false[/code] if it has terminated.\n"
-"Must be a valid ID generated from [method execute].\n"
-"[b]Note:[/b] This method is implemented on Android, iOS, Linux, macOS and "
-"Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the input scancode corresponds to a Unicode "
-"character."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn sich das [AABB] mit einem anderen "
-"überschneidet."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the engine was executed with [code]-v[/code] "
-"(verbose stdout)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code], the [code]user://[/code] file system is persistent, so "
-"that its state is the same after a player quits and starts the game again. "
-"Relevant to the HTML5 platform, where this persistence may be unavailable."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the window should always be on top of other "
-"windows."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Vektor normalisiert ist, andernfalls "
-"false."
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if the window is currently focused.\n"
-"[b]Note:[/b] Only implemented on desktop platforms. On other platforms, it "
-"will always return [code]true[/code]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns active keyboard layout index.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the number of keyboard layouts.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the ISO-639/BCP-47 language code of the keyboard layout at position "
-"[code]index[/code].\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns the localized name of the keyboard layout at position [code]index[/"
-"code].\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Converts a physical (US QWERTY) [code]scancode[/code] to one in the active "
-"keyboard layout.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets active keyboard layout.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Kill (terminate) the process identified by the given process ID ([code]pid[/"
-"code]), e.g. the one returned by [method execute] in non-blocking mode. See "
-"also [method crash].\n"
-"[b]Note:[/b] This method can also be used to kill processes that were not "
-"spawned by the game.\n"
-"[b]Note:[/b] This method is implemented on Android, iOS, Linux, macOS and "
-"Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Moves the file or directory to the system's recycle bin. See also [method "
-"Directory.remove].\n"
-"The method takes only global paths, so you may need to use [method "
-"ProjectSettings.globalize_path]. Do not use it for files in [code]res://[/"
-"code] as it will not work in exported project.\n"
-"[b]Note:[/b] If the user has disabled the recycle bin on their system, the "
-"file will be permanently deleted instead.\n"
-"[codeblock]\n"
-"var file_to_remove = \"user://slot1.sav\"\n"
-"OS.move_to_trash(ProjectSettings.globalize_path(file_to_remove))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Moves the window to the front.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Returns [code]true[/code] if native video is playing.\n"
-"[b]Note:[/b] This method is only implemented on iOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Pauses native video playback.\n"
-"[b]Note:[/b] This method is only implemented on iOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Plays native video from the specified path, at the given volume and with "
-"audio and subtitle tracks.\n"
-"[b]Note:[/b] This method is only implemented on iOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Stops native video playback.\n"
-"[b]Note:[/b] This method is implemented on iOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Resumes native video playback.\n"
-"[b]Note:[/b] This method is implemented on iOS."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Initialises the singleton for the system MIDI driver.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Shows all resources in the game. Optionally, the list can be written to a "
-"file by specifying a file path in [code]tofile[/code]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Shows the list of loaded textures sorted by size in memory."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Shows the number of resources loaded by the game of the given types."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Shows all resources currently used by the game."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Request the user attention to the window. It'll flash the taskbar button on "
-"Windows or bounce the dock icon on OSX.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"At the moment this function is only used by [code]AudioDriverOpenSL[/code] "
-"to request permission for [code]RECORD_AUDIO[/code] on Android."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"With this function, you can request dangerous permissions since normal "
-"permissions are automatically granted at install time in Android "
-"applications.\n"
-"[b]Note:[/b] This method is implemented on Android."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets the value of the environment variable [code]variable[/code] to "
-"[code]value[/code]. The environment variable will be set for the Godot "
-"process and any process executed with [method execute] after running [method "
-"set_environment]. The environment variable will [i]not[/i] persist to "
-"processes run after the Godot process was terminated.\n"
-"[b]Note:[/b] Double-check the casing of [code]variable[/code]. Environment "
-"variable names are case-sensitive on all platforms except Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets the game's icon using an [Image] resource.\n"
-"The same image is used for window caption, taskbar/dock and window selection "
-"dialog. Image is scaled as needed.\n"
-"[b]Note:[/b] This method is implemented on HTML5, Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets whether IME input mode should be enabled.\n"
-"If active IME handles key events before the application and creates an "
-"composition string and suggestion list.\n"
-"Application can retrieve the composition status by using [method "
-"get_ime_selection] and [method get_ime_text] functions.\n"
-"Completed composition string is committed when input is finished.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets position of IME suggestion list popup (in window coordinates).\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets the game's icon using a multi-size platform-specific icon file ([code]*."
-"ico[/code] on Windows and [code]*.icns[/code] on macOS).\n"
-"Appropriate size sub-icons are used for window caption, taskbar/dock and "
-"window selection dialog.\n"
-"[b]Note:[/b] This method is implemented on macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Sets the name of the current thread."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Enables backup saves if [code]enabled[/code] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets whether the window should always be on top.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets a polygonal region of the window which accepts mouse events. Mouse "
-"events outside the region will be passed through.\n"
-"Passing an empty array will disable passthrough support (all mouse events "
-"will be intercepted by the window, which is the default behavior).\n"
-"[codeblock]\n"
-"# Set region, using Path2D node.\n"
-"OS.set_window_mouse_passthrough($Path2D.curve.get_baked_points())\n"
-"\n"
-"# Set region, using Polygon2D node.\n"
-"OS.set_window_mouse_passthrough($Polygon2D.polygon)\n"
-"\n"
-"# Reset region to default.\n"
-"OS.set_window_mouse_passthrough([])\n"
-"[/codeblock]\n"
-"[b]Note:[/b] On Windows, the portion of a window that lies outside the "
-"region is not drawn, while on Linux and macOS it is.\n"
-"[b]Note:[/b] This method is implemented on Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Sets the window title to the specified string.\n"
-"[b]Note:[/b] This should be used sporadically. Don't set this every frame, "
-"as that will negatively affect performance on some window managers.\n"
-"[b]Note:[/b] This method is implemented on HTML5, Linux, macOS and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Requests the OS to open a resource with the most appropriate program. For "
-"example:\n"
-"- [code]OS.shell_open(\"C:\\\\Users\\name\\Downloads\")[/code] on Windows "
-"opens the file explorer at the user's Downloads folder.\n"
-"- [code]OS.shell_open(\"https://godotengine.org\")[/code] opens the default "
-"web browser on the official Godot website.\n"
-"- [code]OS.shell_open(\"mailto:example@example.com\")[/code] opens the "
-"default email client with the \"To\" field set to [code]example@example.com[/"
-"code]. See [url=https://datatracker.ietf.org/doc/html/rfc2368]RFC 2368 - The "
-"[code]mailto[/code] URL scheme[/url] for a list of fields that can be "
-"added.\n"
-"Use [method ProjectSettings.globalize_path] to convert a [code]res://[/code] "
-"or [code]user://[/code] path into a system path for use with this method.\n"
-"[b]Note:[/b] This method is implemented on Android, iOS, HTML5, Linux, macOS "
-"and Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Shows the virtual keyboard if the platform has one.\n"
-"The [code]existing_text[/code] parameter is useful for implementing your own "
-"[LineEdit] or [TextEdit], as it tells the virtual keyboard what text has "
-"already been typed (the virtual keyboard uses it for auto-correct and "
-"predictions).\n"
-"The [code]multiline[/code] parameter needs to be set to [code]true[/code] to "
-"be able to enter multiple lines of text, as in [TextEdit].\n"
-"[b]Note:[/b] This method is implemented on Android, iOS and UWP."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "The clipboard from the host OS. Might be unavailable on some platforms."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "The current screen index (starting from 0)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code], the engine filters the time delta measured between "
-"each frame, and attempts to compensate for random variation. This will only "
-"operate on systems where V-Sync is active."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The exit code passed to the OS when the main loop exits. By convention, an "
-"exit code of [code]0[/code] indicates success whereas a non-zero exit code "
-"indicates an error. For portability reasons, the exit code should be set "
-"between 0 and 125 (inclusive).\n"
-"[b]Note:[/b] This value will be ignored if using [method SceneTree.quit] "
-"with an [code]exit_code[/code] argument passed."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code], the engine tries to keep the screen on while the game "
-"is running. Useful on mobile."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code], the engine optimizes for low processor usage by only "
-"refreshing the screen if needed. Can improve battery consumption on mobile."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The amount of sleeping between frames when the low-processor usage mode is "
-"enabled (in microseconds). Higher values will result in lower CPU usage."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The maximum size of the window (without counting window manager "
-"decorations). Does not affect fullscreen mode. Set to [code](0, 0)[/code] to "
-"reset to the system default value."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The minimum size of the window in pixels (without counting window manager "
-"decorations). Does not affect fullscreen mode. Set to [code](0, 0)[/code] to "
-"reset to the system's default value.\n"
-"[b]Note:[/b] By default, the project window has a minimum size of "
-"[code]Vector2(64, 64)[/code]. This prevents issues that can arise when the "
-"window is resized to a near-zero size."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "The current screen orientation."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "The current tablet driver in use."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "If [code]true[/code], vertical synchronization (Vsync) is enabled."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code] and [code]vsync_enabled[/code] is true, the operating "
-"system's window compositor will be used for vsync when the compositor is "
-"enabled and the game is in windowed mode.\n"
-"[b]Note:[/b] This option is experimental and meant to alleviate stutter "
-"experienced by some users. However, some users have experienced a Vsync "
-"framerate halving (e.g. from 60 FPS to 30 FPS) when using it.\n"
-"[b]Note:[/b] This property is only implemented on Windows."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code], removes the window frame.\n"
-"[b]Note:[/b] Setting [code]window_borderless[/code] to [code]false[/code] "
-"disables per-pixel transparency."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "If [code]true[/code], the window is fullscreen."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "If [code]true[/code], the window is maximized."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "If [code]true[/code], the window is minimized."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/OS.xml
-msgid ""
-"If [code]true[/code], the window background is transparent and the window "
-"frame is removed.\n"
-"Use [code]get_tree().get_root().set_transparent_background(true)[/code] to "
-"disable main viewport background rendering.\n"
-"[b]Note:[/b] This property has no effect if [member ProjectSettings.display/"
-"window/per_pixel_transparency/allowed] setting is disabled.\n"
-"[b]Note:[/b] This property is implemented on HTML5, Linux, macOS, Windows, "
-"and Android. It can't be changed at runtime for Android. Use [member "
-"ProjectSettings.display/window/per_pixel_transparency/enabled] to set it at "
-"startup instead."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The window position relative to the screen, the origin is the top left "
-"corner, +Y axis goes to the bottom and +X axis goes to the right."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "If [code]true[/code], the window is resizable by the user."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/OS.xml
-msgid "The size of the window (without counting window manager decorations)."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The GLES2 rendering backend. It uses OpenGL ES 2.0 on mobile devices, OpenGL "
-"2.1 on desktop platforms and WebGL 1.0 on the web."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"The GLES3 rendering backend. It uses OpenGL ES 3.0 on mobile devices, OpenGL "
-"3.3 on desktop platforms and WebGL 2.0 on the web."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Sunday."
-msgstr "Sonntag."
-
-#: doc/classes/OS.xml
-msgid "Monday."
-msgstr "Montag."
-
-#: doc/classes/OS.xml
-msgid "Tuesday."
-msgstr "Dienstag."
-
-#: doc/classes/OS.xml
-msgid "Wednesday."
-msgstr "Wittwoch."
-
-#: doc/classes/OS.xml
-msgid "Thursday."
-msgstr "Donnerstag."
-
-#: doc/classes/OS.xml
-msgid "Friday."
-msgstr "Freitag."
-
-#: doc/classes/OS.xml
-msgid "Saturday."
-msgstr "Samstag."
-
-#: doc/classes/OS.xml
-msgid "January."
-msgstr "Januar."
-
-#: doc/classes/OS.xml
-msgid "February."
-msgstr "Februar."
-
-#: doc/classes/OS.xml
-msgid "March."
-msgstr "März."
-
-#: doc/classes/OS.xml
-msgid "April."
-msgstr "April."
-
-#: doc/classes/OS.xml
-msgid "May."
-msgstr "Mai."
-
-#: doc/classes/OS.xml
-msgid "June."
-msgstr "Juni."
-
-#: doc/classes/OS.xml
-msgid "July."
-msgstr "Juli."
-
-#: doc/classes/OS.xml
-msgid "August."
-msgstr "August."
-
-#: doc/classes/OS.xml
-msgid "September."
-msgstr "September."
-
-#: doc/classes/OS.xml
-msgid "October."
-msgstr "Oktober."
-
-#: doc/classes/OS.xml
-msgid "November."
-msgstr "November."
-
-#: doc/classes/OS.xml
-msgid "December."
-msgstr "Dezember."
-
-#: doc/classes/OS.xml
-msgid ""
-"Application handle:\n"
-"- Windows: [code]HINSTANCE[/code] of the application\n"
-"- MacOS: [code]NSApplication*[/code] of the application (not yet "
-"implemented)\n"
-"- Android: [code]JNIEnv*[/code] of the application (not yet implemented)"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Display handle:\n"
-"- Linux: [code]X11::Display*[/code] for the display"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Window handle:\n"
-"- Windows: [code]HWND[/code] of the main window\n"
-"- Linux: [code]X11::Window*[/code] of the main window\n"
-"- MacOS: [code]NSWindow*[/code] of the main window (not yet implemented)\n"
-"- Android: [code]jObject[/code] the main android activity (not yet "
-"implemented)"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"Window view:\n"
-"- Windows: [code]HDC[/code] of the main window drawing context\n"
-"- MacOS: [code]NSView*[/code] of the main windows view (not yet implemented)"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid ""
-"OpenGL Context:\n"
-"- Windows: [code]HGLRC[/code]\n"
-"- Linux: [code]X11::GLXContext[/code]\n"
-"- MacOS: [code]NSOpenGLContext*[/code] (not yet implemented)"
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Landscape screen orientation."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Portrait screen orientation."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Reverse landscape screen orientation."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Reverse portrait screen orientation."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Uses landscape or reverse landscape based on the hardware sensor."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Uses portrait or reverse portrait based on the hardware sensor."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Uses most suitable orientation based on the hardware sensor."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Desktop directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "DCIM (Digital Camera Images) directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Documents directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Downloads directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Movies directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Music directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Pictures directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Ringtones directory path."
-msgstr ""
-
-#: doc/classes/OS.xml
-#, fuzzy
-msgid "Unknown powerstate."
-msgstr "unbekanntes Node."
-
-#: doc/classes/OS.xml
-msgid "Unplugged, running on battery."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Plugged in, no battery available."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Plugged in, battery charging."
-msgstr ""
-
-#: doc/classes/OS.xml
-msgid "Plugged in, battery fully charged."
-msgstr ""
-
-#: doc/classes/PackedDataContainerRef.xml
-msgid "Reference version of [PackedDataContainer]."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid "An abstraction of a serialized scene."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"A simplified interface to a scene file. Provides access to operations and "
-"checks that can be performed on the scene resource itself.\n"
-"Can be used to save a node to a file. When saving, the node as well as all "
-"the nodes it owns get saved (see [code]owner[/code] property on [Node]).\n"
-"[b]Note:[/b] The node doesn't need to own itself.\n"
-"[b]Example of loading a saved scene:[/b]\n"
-"[codeblock]\n"
-"# Use `load()` instead of `preload()` if the path isn't known at compile-"
-"time.\n"
-"var scene = preload(\"res://scene.tscn\").instance()\n"
-"# Add the node as a child of the node the script is attached to.\n"
-"add_child(scene)\n"
-"[/codeblock]\n"
-"[b]Example of saving a node with different owners:[/b] The following example "
-"creates 3 objects: [code]Node2D[/code] ([code]node[/code]), "
-"[code]RigidBody2D[/code] ([code]rigid[/code]) and [code]CollisionObject2D[/"
-"code] ([code]collision[/code]). [code]collision[/code] is a child of "
-"[code]rigid[/code] which is a child of [code]node[/code]. Only [code]rigid[/"
-"code] is owned by [code]node[/code] and [code]pack[/code] will therefore "
-"only save those two nodes, but not [code]collision[/code].\n"
-"[codeblock]\n"
-"# Create the objects.\n"
-"var node = Node2D.new()\n"
-"var rigid = RigidBody2D.new()\n"
-"var collision = CollisionShape2D.new()\n"
-"\n"
-"# Create the object hierarchy.\n"
-"rigid.add_child(collision)\n"
-"node.add_child(rigid)\n"
-"\n"
-"# Change owner of `rigid`, but not of `collision`.\n"
-"rigid.owner = node\n"
-"\n"
-"var scene = PackedScene.new()\n"
-"# Only `node` and `rigid` are now packed.\n"
-"var result = scene.pack(node)\n"
-"if result == OK:\n"
-"    var error = ResourceSaver.save(\"res://path/name.scn\", scene)  # Or "
-"\"user://...\"\n"
-"    if error != OK:\n"
-"        push_error(\"An error occurred while saving the scene to disk.\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid "Returns [code]true[/code] if the scene file has nodes."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"Returns the [code]SceneState[/code] representing the scene file contents."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"Instantiates the scene's node hierarchy. Triggers child scene "
-"instantiation(s). Triggers a [constant Node.NOTIFICATION_INSTANCED] "
-"notification on the root node."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"Pack will ignore any sub-nodes not owned by given node. See [member Node."
-"owner]."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"A dictionary representation of the scene contents.\n"
-"Available keys include \"rnames\" and \"variants\" for resources, "
-"\"node_count\", \"nodes\", \"node_paths\" for nodes, \"editable_instances\" "
-"for base scene children overrides, \"conn_count\" and \"conns\" for signal "
-"connections, and \"version\" for the format style of the PackedScene."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid "If passed to [method instance], blocks edits to the scene state."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"If passed to [method instance], provides local scene resources to the local "
-"scene.\n"
-"[b]Note:[/b] Only available in editor builds."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"If passed to [method instance], provides local scene resources to the local "
-"scene. Only the main scene should receive the main edit state.\n"
-"[b]Note:[/b] Only available in editor builds."
-msgstr ""
-
-#: doc/classes/PackedScene.xml
-msgid ""
-"It's similar to [constant GEN_EDIT_STATE_MAIN], but for the case where the "
-"scene is being instantiated to be the base of another one.\n"
-"[b]Note:[/b] Only available in editor builds."
-msgstr ""
-
-#: modules/gltf/doc_classes/PackedSceneGLTF.xml
-msgid ""
-"[b]Note:[/b] This class is only compiled in editor builds. Run-time glTF "
-"loading and saving is [i]not[/i] available in exported projects. References "
-"to [PackedSceneGLTF] within a script will cause an error in an exported "
-"project."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-msgid "Abstraction and base class for packet-based protocols."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-msgid ""
-"PacketPeer is an abstraction and base class for packet-based protocols (such "
-"as UDP). It provides an API for sending and receiving packets both as raw "
-"data or variables. This makes it easy to transfer data over a protocol, "
-"without having to encode data as low-level bytes or having to worry about "
-"network ordering."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-msgid "Returns the number of packets currently available in the ring-buffer."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-msgid "Gets a raw packet."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-msgid ""
-"Returns the error state of the last packet received (via [method get_packet] "
-"and [method get_var])."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-#, fuzzy
-msgid ""
-"Gets a Variant. If [code]allow_objects[/code] (or [member "
-"allow_object_decoding]) is [code]true[/code], decoding objects is allowed.\n"
-"[b]Warning:[/b] Deserialized objects can contain code which gets executed. "
-"Do not use this option if the serialized object comes from untrusted sources "
-"to avoid potential security threats such as remote code execution."
-msgstr ""
-"Dekodiert ein Byte-Array zurück zu einem Wert. Wenn [code]allow_objects[/"
-"code] gleich [code]wahr[/code], ist die Dekodierung von Objekten erlaubt.\n"
-"[b]WARNUNG:[/b] Deserialisierte Objekte können Code enthalten, der "
-"ausgeführt wird. Verwenden Sie diese Option nicht, wenn das serialisierte "
-"Objekt aus nicht vertrauenswürdigen Quellen stammt, um potenzielle "
-"Sicherheitsbedrohungen zu vermeiden (entfernte Codeausführung)."
-
-#: doc/classes/PacketPeer.xml
-msgid "Sends a raw packet."
-msgstr ""
-
-#: doc/classes/PacketPeer.xml
-#, fuzzy
-msgid ""
-"Sends a [Variant] as a packet. If [code]full_objects[/code] (or [member "
-"allow_object_decoding]) is [code]true[/code], encoding objects is allowed "
-"(and can potentially include code)."
-msgstr ""
-"Kodiert eine Variable zu einem Byte Array. Wenn [code]full_objects[/code] "
-"ist [code]true[/code], wird das Kodieren von Objekten erlaubt (und kann "
-"potentiell auch Quelltext enthalten)."
-
-#: doc/classes/PacketPeer.xml
-#, fuzzy
-msgid ""
-"[i]Deprecated.[/i] Use [code]get_var[/code] and [code]put_var[/code] "
-"parameters instead.\n"
-"If [code]true[/code], the PacketPeer will allow encoding and decoding of "
-"object via [method get_var] and [method put_var].\n"
-"[b]Warning:[/b] Deserialized objects can contain code which gets executed. "
-"Do not use this option if the serialized object comes from untrusted sources "
-"to avoid potential security threats such as remote code execution."
-msgstr ""
-"Dekodiert ein Byte-Array zurück zu einem Wert. Wenn [code]allow_objects[/"
-"code] gleich [code]wahr[/code], ist die Dekodierung von Objekten erlaubt.\n"
-"[b]WARNUNG:[/b] Deserialisierte Objekte können Code enthalten, der "
-"ausgeführt wird. Verwenden Sie diese Option nicht, wenn das serialisierte "
-"Objekt aus nicht vertrauenswürdigen Quellen stammt, um potenzielle "
-"Sicherheitsbedrohungen zu vermeiden (entfernte Codeausführung)."
-
-#: doc/classes/PacketPeer.xml
-msgid ""
-"Maximum buffer size allowed when encoding [Variant]s. Raise this value to "
-"support heavier memory allocations.\n"
-"The [method put_var] method allocates memory on the stack, and the buffer "
-"used will grow automatically to the closest power of two to match the size "
-"of the [Variant]. If the [Variant] is bigger than "
-"[code]encode_buffer_max_size[/code], the method will error out with "
-"[constant ERR_OUT_OF_MEMORY]."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid "DTLS packet peer."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid ""
-"This class represents a DTLS peer connection. It can be used to connect to a "
-"DTLS server, and is returned by [method DTLSServer.take_connection].\n"
-"[b]Warning:[/b] SSL/TLS certificate revocation and certificate pinning are "
-"currently not supported. Revoked certificates are accepted as long as they "
-"are otherwise valid. If this is a concern, you may want to use automatically "
-"managed certificates with a short validity period."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid ""
-"Connects a [code]peer[/code] beginning the DTLS handshake using the "
-"underlying [PacketPeerUDP] which must be connected (see [method "
-"PacketPeerUDP.connect_to_host]). If [code]validate_certs[/code] is "
-"[code]true[/code], [PacketPeerDTLS] will validate that the certificate "
-"presented by the remote peer and match it with the [code]for_hostname[/code] "
-"argument. You can specify a custom [X509Certificate] to use for validation "
-"via the [code]valid_certificate[/code] argument."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid "Disconnects this peer, terminating the DTLS session."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml doc/classes/StreamPeerSSL.xml
-msgid "Returns the status of the connection. See [enum Status] for values."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid ""
-"Poll the connection to check for incoming packets. Call this frequently to "
-"update the status and keep the connection working."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid "A status representing a [PacketPeerDTLS] that is disconnected."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid ""
-"A status representing a [PacketPeerDTLS] that is currently performing the "
-"handshake with a remote peer."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid ""
-"A status representing a [PacketPeerDTLS] that is connected to a remote peer."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid "A status representing a [PacketPeerDTLS] in a generic error state."
-msgstr ""
-
-#: doc/classes/PacketPeerDTLS.xml
-msgid ""
-"An error status that shows a mismatch in the DTLS certificate domain "
-"presented by the host and the domain requested for validation."
-msgstr ""
-
-#: doc/classes/PacketPeerStream.xml
-msgid "Wrapper to use a PacketPeer over a StreamPeer."
-msgstr ""
-
-#: doc/classes/PacketPeerStream.xml
-msgid ""
-"PacketStreamPeer provides a wrapper for working using packets over a stream. "
-"This allows for using packet based code with StreamPeers. PacketPeerStream "
-"implements a custom protocol over the StreamPeer, so the user should not "
-"read or write to the wrapped StreamPeer directly."
-msgstr ""
-
-#: doc/classes/PacketPeerStream.xml
-msgid "The wrapped [StreamPeer] object."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid "UDP packet peer."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"UDP packet peer. Can be used to send raw UDP packets as well as [Variant]s."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid "Closes the UDP socket the [PacketPeerUDP] is currently listening on."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Calling this method connects this UDP peer to the given [code]host[/code]/"
-"[code]port[/code] pair. UDP is in reality connectionless, so this option "
-"only means that incoming packets from different addresses are automatically "
-"discarded, and that outgoing packets are always sent to the connected "
-"address (future calls to [method set_dest_address] are not allowed). This "
-"method does not send any data to the remote peer, to do that, use [method "
-"PacketPeer.put_var] or [method PacketPeer.put_packet] as usual. See also "
-"[UDPServer].\n"
-"[b]Note:[/b] Connecting to the remote peer does not help to protect from "
-"malicious attacks like IP spoofing, etc. Think about using an encryption "
-"technique like SSL or DTLS if you feel like your application is transferring "
-"sensitive information."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Returns the IP of the remote peer that sent the last packet(that was "
-"received with [method PacketPeer.get_packet] or [method PacketPeer.get_var])."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Returns the port of the remote peer that sent the last packet(that was "
-"received with [method PacketPeer.get_packet] or [method PacketPeer.get_var])."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Returns [code]true[/code] if the UDP socket is open and has been connected "
-"to a remote address. See [method connect_to_host]."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid "Returns whether this [PacketPeerUDP] is listening."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Joins the multicast group specified by [code]multicast_address[/code] using "
-"the interface identified by [code]interface_name[/code].\n"
-"You can join the same multicast group with multiple interfaces. Use [method "
-"IP.get_local_interfaces] to know which are available.\n"
-"[b]Note:[/b] Some Android devices might require the "
-"[code]CHANGE_WIFI_MULTICAST_STATE[/code] permission for multicast to work."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Removes the interface identified by [code]interface_name[/code] from the "
-"multicast group specified by [code]multicast_address[/code]."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Makes this [PacketPeerUDP] listen on the [code]port[/code] binding to "
-"[code]bind_address[/code] with a buffer size [code]recv_buf_size[/code].\n"
-"If [code]bind_address[/code] is set to [code]\"*\"[/code] (default), the "
-"peer will listen on all available addresses (both IPv4 and IPv6).\n"
-"If [code]bind_address[/code] is set to [code]\"0.0.0.0\"[/code] (for IPv4) "
-"or [code]\"::\"[/code] (for IPv6), the peer will listen on all available "
-"addresses matching that IP type.\n"
-"If [code]bind_address[/code] is set to any valid address (e.g. "
-"[code]\"192.168.1.101\"[/code], [code]\"::1\"[/code], etc), the peer will "
-"only listen on the interface with that addresses (or fail if no interface "
-"with the given address exists)."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Enable or disable sending of broadcast packets (e.g. "
-"[code]set_dest_address(\"255.255.255.255\", 4343)[/code]. This option is "
-"disabled by default.\n"
-"[b]Note:[/b] Some Android devices might require the "
-"[code]CHANGE_WIFI_MULTICAST_STATE[/code] permission and this option to be "
-"enabled to receive broadcast packets too."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Sets the destination address and port for sending packets and variables. A "
-"hostname will be resolved using DNS if needed.\n"
-"[b]Note:[/b] [method set_broadcast_enabled] must be enabled before sending "
-"packets to a broadcast address (e.g. [code]255.255.255.255[/code])."
-msgstr ""
-
-#: doc/classes/PacketPeerUDP.xml
-msgid ""
-"Waits for a packet to arrive on the listening port. See [method listen].\n"
-"[b]Note:[/b] [method wait] can't be interrupted once it has been called. "
-"This can be worked around by allowing the other party to send a specific "
-"\"death pill\" packet like this:\n"
-"[codeblock]\n"
-"# Server\n"
-"socket.set_dest_address(\"127.0.0.1\", 789)\n"
-"socket.put_packet(\"Time to stop\".to_ascii())\n"
-"\n"
-"# Client\n"
-"while socket.wait() == OK:\n"
-"    var data = socket.get_packet().get_string_from_ascii()\n"
-"    if data == \"Time to stop\":\n"
-"        return\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Panel.xml
-msgid "Provides an opaque background for [Control] children."
-msgstr ""
-
-#: doc/classes/Panel.xml
-msgid ""
-"Panel is a [Control] that displays an opaque background. It's commonly used "
-"as a parent and container for other types of [Control] nodes."
-msgstr ""
-
-#: doc/classes/Panel.xml
-msgid "2D Finite State Machine Demo"
-msgstr ""
-
-#: doc/classes/Panel.xml doc/classes/Skeleton.xml doc/classes/SkeletonIK.xml
-msgid "3D Inverse Kinematics Demo"
-msgstr ""
-
-#: doc/classes/Panel.xml
-msgid "The style of this [Panel]."
-msgstr ""
-
-#: doc/classes/PanelContainer.xml
-msgid "Panel container type."
-msgstr ""
-
-#: doc/classes/PanelContainer.xml
-msgid ""
-"Panel container type. This container fits controls inside of the delimited "
-"area of a stylebox. It's useful for giving controls an outline."
-msgstr ""
-
-#: doc/classes/PanelContainer.xml
-msgid "The style of [PanelContainer]'s background."
-msgstr ""
-
-#: doc/classes/PanoramaSky.xml
-msgid "A type of [Sky] used to draw a background texture."
-msgstr ""
-
-#: doc/classes/PanoramaSky.xml
-msgid ""
-"A resource referenced in an [Environment] that is used to draw a background. "
-"The Panorama sky functions similar to skyboxes in other engines, except it "
-"uses an equirectangular sky map instead of a cube map.\n"
-"Using an HDR panorama is strongly recommended for accurate, high-quality "
-"reflections. Godot supports the Radiance HDR ([code].hdr[/code]) and OpenEXR "
-"([code].exr[/code]) image formats for this purpose.\n"
-"You can use [url=https://danilw.github.io/GLSL-howto/cubemap_to_panorama_js/"
-"cubemap_to_panorama.html]this tool[/url] to convert a cube map to an "
-"equirectangular sky map."
-msgstr ""
-
-#: doc/classes/PanoramaSky.xml
-#, fuzzy
-msgid "[Texture] to be applied to the PanoramaSky."
-msgstr "Gibt die Größe des Arrays zurück."
-
-#: doc/classes/ParallaxBackground.xml
-msgid "A node used to create a parallax scrolling background."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid ""
-"A ParallaxBackground uses one or more [ParallaxLayer] child nodes to create "
-"a parallax effect. Each [ParallaxLayer] can move at a different speed using "
-"[member ParallaxLayer.motion_offset]. This creates an illusion of depth in a "
-"2D game. If not used with a [Camera2D], you must manually calculate the "
-"[member scroll_offset]."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid "The base position offset for all [ParallaxLayer] children."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid "The base motion scale for all [ParallaxLayer] children."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid ""
-"If [code]true[/code], elements in [ParallaxLayer] child aren't affected by "
-"the zoom level of the camera."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid ""
-"Top-left limits for scrolling to begin. If the camera is outside of this "
-"limit, the background will stop scrolling. Must be lower than [member "
-"scroll_limit_end] to work."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid ""
-"Bottom-right limits for scrolling to end. If the camera is outside of this "
-"limit, the background will stop scrolling. Must be higher than [member "
-"scroll_limit_begin] to work."
-msgstr ""
-
-#: doc/classes/ParallaxBackground.xml
-msgid ""
-"The ParallaxBackground's scroll value. Calculated automatically when using a "
-"[Camera2D], but can be used to manually manage scrolling when no camera is "
-"present."
-msgstr ""
-
-#: doc/classes/ParallaxLayer.xml
-msgid "A parallax scrolling layer to be used with [ParallaxBackground]."
-msgstr ""
-
-#: doc/classes/ParallaxLayer.xml
-msgid ""
-"A ParallaxLayer must be the child of a [ParallaxBackground] node. Each "
-"ParallaxLayer can be set to move at different speeds relative to the camera "
-"movement or the [member ParallaxBackground.scroll_offset] value.\n"
-"This node's children will be affected by its scroll offset.\n"
-"[b]Note:[/b] Any changes to this node's position and scale made after it "
-"enters the scene will be ignored."
-msgstr ""
-
-#: doc/classes/ParallaxLayer.xml
-msgid ""
-"The ParallaxLayer's [Texture] mirroring. Useful for creating an infinite "
-"scrolling background. If an axis is set to [code]0[/code], the [Texture] "
-"will not be mirrored."
-msgstr ""
-
-#: doc/classes/ParallaxLayer.xml
-msgid ""
-"The ParallaxLayer's offset relative to the parent ParallaxBackground's "
-"[member ParallaxBackground.scroll_offset]."
-msgstr ""
-
-#: doc/classes/ParallaxLayer.xml
-msgid ""
-"Multiplies the ParallaxLayer's motion. If an axis is set to [code]0[/code], "
-"it will not scroll."
-msgstr ""
-
-#: doc/classes/Particles.xml
-#, fuzzy
-msgid "GPU-based 3D particle emitter."
-msgstr "3D Partikel Emitter."
-
-#: doc/classes/Particles.xml
-msgid ""
-"3D particle node used to create a variety of particle systems and effects. "
-"[Particles] features an emitter that generates some number of particles at a "
-"given rate.\n"
-"Use the [code]process_material[/code] property to add a [ParticlesMaterial] "
-"to configure particle appearance and behavior. Alternatively, you can add a "
-"[ShaderMaterial] which will be applied to all particles.\n"
-"[b]Note:[/b] [Particles] only work when using the GLES3 renderer. If using "
-"the GLES2 renderer, use [CPUParticles] instead. You can convert [Particles] "
-"to [CPUParticles] by selecting the node, clicking the [b]Particles[/b] menu "
-"at the top of the 3D editor viewport then choosing [b]Convert to "
-"CPUParticles[/b].\n"
-"[b]Note:[/b] On macOS, [Particles] rendering is much slower than "
-"[CPUParticles] due to transform feedback being implemented on the CPU "
-"instead of the GPU. Consider using [CPUParticles] instead when targeting "
-"macOS.\n"
-"[b]Note:[/b] After working on a Particles node, remember to update its "
-"[member visibility_aabb] by selecting it, clicking the [b]Particles[/b] menu "
-"at the top of the 3D editor viewport then choose [b]Generate Visibility "
-"AABB[/b]. Otherwise, particles may suddenly disappear depending on the "
-"camera position and angle."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "Controlling thousands of fish with Particles"
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid ""
-"Returns the axis-aligned bounding box that contains all the particles that "
-"are active in the current frame."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "Returns the [Mesh] that is drawn at index [code]pass[/code]."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "Restarts the particle emission, clearing existing particles."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "Sets the [Mesh] that is drawn at index [code]pass[/code]."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "[Mesh] that is drawn for the first draw pass."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "[Mesh] that is drawn for the second draw pass."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "[Mesh] that is drawn for the third draw pass."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "[Mesh] that is drawn for the fourth draw pass."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "The number of draw passes when rendering particles."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid ""
-"Time ratio between each emission. If [code]0[/code], particles are emitted "
-"continuously. If [code]1[/code], all particles are emitted simultaneously."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid ""
-"If [code]true[/code], only [code]amount[/code] particles will be emitted."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid ""
-"Amount of time to preprocess the particles before animation starts. Lets you "
-"start the animation some time after particles have started emitting."
-msgstr ""
-
-#: doc/classes/Particles.xml doc/classes/Particles2D.xml
-msgid ""
-"[Material] for processing particles. Can be a [ParticlesMaterial] or a "
-"[ShaderMaterial]."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "Emission randomness ratio."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid ""
-"Speed scaling ratio. A value of [code]0[/code] can be used to pause the "
-"particles."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid ""
-"The [AABB] that determines the node's region which needs to be visible on "
-"screen for the particle system to be active.\n"
-"Grow the box if particles suddenly appear/disappear when the node enters/"
-"exits the screen. The [AABB] can be grown via code or with the [b]Particles "
-"→ Generate AABB[/b] editor tool.\n"
-"[b]Note:[/b] If the [ParticlesMaterial] in use is configured to cast "
-"shadows, you may want to enlarge this AABB to ensure the shadow is updated "
-"when particles are off-screen."
-msgstr ""
-
-#: doc/classes/Particles.xml
-msgid "Maximum number of draw passes supported."
-msgstr ""
-
-#: doc/classes/Particles2D.xml
-#, fuzzy
-msgid "GPU-based 2D particle emitter."
-msgstr "2D Partikel Emitter."
-
-#: doc/classes/Particles2D.xml
-msgid ""
-"2D particle node used to create a variety of particle systems and effects. "
-"[Particles2D] features an emitter that generates some number of particles at "
-"a given rate.\n"
-"Use the [code]process_material[/code] property to add a [ParticlesMaterial] "
-"to configure particle appearance and behavior. Alternatively, you can add a "
-"[ShaderMaterial] which will be applied to all particles.\n"
-"[b]Note:[/b] [Particles2D] only work when using the GLES3 renderer. If using "
-"the GLES2 renderer, use [CPUParticles2D] instead. You can convert "
-"[Particles2D] to [CPUParticles2D] by selecting the node, clicking the "
-"[b]Particles[/b] menu at the top of the 2D editor viewport then choosing "
-"[b]Convert to CPUParticles2D[/b].\n"
-"[b]Note:[/b] On macOS, [Particles2D] rendering is much slower than "
-"[CPUParticles2D] due to transform feedback being implemented on the CPU "
-"instead of the GPU. Consider using [CPUParticles2D] instead when targeting "
-"macOS.\n"
-"[b]Note:[/b] After working on a Particles node, remember to update its "
-"[member visibility_rect] by selecting it, clicking the [b]Particles[/b] menu "
-"at the top of the 2D editor viewport then choose [b]Generate Visibility "
-"Rect[/b]. Otherwise, particles may suddenly disappear depending on the "
-"camera position and angle.\n"
-"[b]Note:[/b] Unlike [CPUParticles2D], [Particles2D] currently ignore the "
-"texture region defined in [AtlasTexture]s."
-msgstr ""
-
-#: doc/classes/Particles2D.xml
-msgid "Particle systems (2D)"
-msgstr ""
-
-#: doc/classes/Particles2D.xml
-#, fuzzy
-msgid "2D Particles Demo"
-msgstr "2D Platformer Demo"
-
-#: doc/classes/Particles2D.xml
-msgid ""
-"2D Dodge The Creeps Demo (uses GPUParticles2D for the trail behind the "
-"player)"
-msgstr ""
-
-#: doc/classes/Particles2D.xml
-msgid "Returns a rectangle containing the positions of all existing particles."
-msgstr ""
-
-#: doc/classes/Particles2D.xml
-msgid "Restarts all the existing particles."
-msgstr ""
-
-#: doc/classes/Particles2D.xml
-msgid ""
-"The [Rect2] that determines the node's region which needs to be visible on "
-"screen for the particle system to be active.\n"
-"Grow the rect if particles suddenly appear/disappear when the node enters/"
-"exits the screen. The [Rect2] can be grown via code or with the [b]Particles "
-"→ Generate Visibility Rect[/b] editor tool."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Particle properties for [Particles] and [Particles2D] nodes."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"ParticlesMaterial defines particle properties and behavior. It is used in "
-"the [code]process_material[/code] of [Particles] and [Particles2D] emitter "
-"nodes.\n"
-"Some of this material's properties are applied to each particle when "
-"emitted, while others can have a [CurveTexture] applied to vary values over "
-"the lifetime of the particle.\n"
-"When a randomness ratio is applied to a property it is used to scale that "
-"property by a random amount. The random ratio is used to interpolate between "
-"[code]1.0[/code] and a random number less than one, the result is multiplied "
-"by the property to obtain the randomized property. For example a random "
-"ratio of [code]0.4[/code] would scale the original property between "
-"[code]0.4-1.0[/code] of its original value."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Returns [code]true[/code] if the specified flag is enabled."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Returns the randomness ratio associated with the specified parameter."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-#, fuzzy
-msgid "Returns the [Texture] used by the specified parameter."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"If [code]true[/code], enables the specified flag. See [enum Flags] for "
-"options."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Sets the specified [enum Parameter]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Sets the randomness ratio for the specified [enum Parameter]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-#, fuzzy
-msgid "Sets the [Texture] for the specified [enum Parameter]."
-msgstr "Gibt das Unternodemit dem angegebenen [code]Namen[/code] zurück."
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Initial rotation applied to each particle, in degrees.\n"
-"[b]Note:[/b] Only applied when [member flag_disable_z] or [member "
-"flag_rotate_y] are [code]true[/code] or the [SpatialMaterial] being used to "
-"draw the particle is using [constant SpatialMaterial.BILLBOARD_PARTICLES]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's rotation will be animated along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Initial angular velocity applied to each particle in [i]degrees[/i] per "
-"second. Sets the speed of rotation of the particle.\n"
-"[b]Note:[/b] Only applied when [member flag_disable_z] or [member "
-"flag_rotate_y] are [code]true[/code] or the [SpatialMaterial] being used to "
-"draw the particle is using [constant SpatialMaterial.BILLBOARD_PARTICLES]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's angular velocity will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's animation offset will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's animation speed will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's initial color. If the [Particles2D]'s [code]texture[/code] "
-"is defined, it will be multiplied by this color. To have particle display "
-"color in a [SpatialMaterial] make sure to set [member SpatialMaterial."
-"vertex_color_use_as_albedo] to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Damping will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The box's extents if [code]emission_shape[/code] is set to [constant "
-"EMISSION_SHAPE_BOX]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Particle color will be modulated by color determined by sampling this "
-"texture at the same point as the [member emission_point_texture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Particle velocity and rotation will be set by sampling this texture at the "
-"same point as the [member emission_point_texture]. Used only in [constant "
-"EMISSION_SHAPE_DIRECTED_POINTS]. Can be created automatically from mesh or "
-"node by selecting \"Create Emission Points from Mesh/Node\" under the "
-"\"Particles\" tool in the toolbar."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The number of emission points if [code]emission_shape[/code] is set to "
-"[constant EMISSION_SHAPE_POINTS] or [constant "
-"EMISSION_SHAPE_DIRECTED_POINTS]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Particles will be emitted at positions determined by sampling this texture "
-"at a random position. Used with [constant EMISSION_SHAPE_POINTS] and "
-"[constant EMISSION_SHAPE_DIRECTED_POINTS]. Can be created automatically from "
-"mesh or node by selecting \"Create Emission Points from Mesh/Node\" under "
-"the \"Particles\" tool in the toolbar."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The axis of the ring when using the emitter [constant EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The height of the ring when using the emitter [constant EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The inner radius of the ring when using the emitter [constant "
-"EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The radius of the ring when using the emitter [constant EMISSION_SHAPE_RING]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Particles will be emitted inside this region. Use [enum EmissionShape] "
-"constants for values."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"The sphere's radius if [code]emission_shape[/code] is set to [constant "
-"EMISSION_SHAPE_SPHERE]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Amount of [member spread] along the Y axis."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's hue will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's linear acceleration will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Orbital velocity applied to each particle. Makes the particles circle around "
-"origin. Specified in number of full rotations around origin per second.\n"
-"[b]Note:[/b] Only available when [member flag_disable_z] is [code]true[/"
-"code]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's orbital velocity will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's radial acceleration will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Each particle's scale will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Each particle's tangential acceleration will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Trail particles' color will vary along this [GradientTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Emitter will emit [code]amount[/code] divided by [code]trail_divisor[/code] "
-"particles. The remaining particles will be used as trail(s)."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Trail particles' size will vary along this [CurveTexture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set initial velocity properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set angular velocity properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set orbital velocity properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set linear acceleration properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set radial acceleration properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set tangential acceleration properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set damping properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set angle properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set scale properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set hue variation properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set animation speed properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Use with [method set_param], [method set_param_randomness], and [method "
-"set_param_texture] to set animation offset properties."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Use with [method set_flag] to set [member flag_align_y]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Use with [method set_flag] to set [member flag_rotate_y]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid "Use with [method set_flag] to set [member flag_disable_z]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Particles will be emitted at a position determined by sampling a random "
-"point on the [member emission_point_texture]. Particle color will be "
-"modulated by [member emission_color_texture]."
-msgstr ""
-
-#: doc/classes/ParticlesMaterial.xml
-msgid ""
-"Particles will be emitted at a position determined by sampling a random "
-"point on the [member emission_point_texture]. Particle velocity and rotation "
-"will be set based on [member emission_normal_texture]. Particle color will "
-"be modulated by [member emission_color_texture]."
-msgstr ""
-
-#: doc/classes/Path.xml
-msgid "Contains a [Curve3D] path for [PathFollow] nodes to follow."
-msgstr ""
-
-#: doc/classes/Path.xml
-msgid ""
-"Can have [PathFollow] child nodes moving along the [Curve3D]. See "
-"[PathFollow] for more information on the usage.\n"
-"Note that the path is considered as relative to the moved nodes (children of "
-"[PathFollow]). As such, the curve should usually start with a zero vector "
-"[code](0, 0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Path.xml
-msgid "A [Curve3D] describing the path."
-msgstr ""
-
-#: doc/classes/Path.xml
-msgid "Emitted when the [member curve] changes."
-msgstr ""
-
-#: doc/classes/Path2D.xml
-msgid "Contains a [Curve2D] path for [PathFollow2D] nodes to follow."
-msgstr ""
-
-#: doc/classes/Path2D.xml
-msgid ""
-"Can have [PathFollow2D] child nodes moving along the [Curve2D]. See "
-"[PathFollow2D] for more information on usage.\n"
-"[b]Note:[/b] The path is considered as relative to the moved nodes (children "
-"of [PathFollow2D]). As such, the curve should usually start with a zero "
-"vector ([code](0, 0)[/code])."
-msgstr ""
-
-#: doc/classes/Path2D.xml
-msgid "A [Curve2D] describing the path."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid "Point sampler for a [Path]."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid ""
-"This node takes its parent [Path], and returns the coordinates of a point "
-"within it, given a distance from the first vertex.\n"
-"It is useful for making other nodes follow a path, without coding the "
-"movement pattern. For that, the nodes must be children of this node. The "
-"descendant nodes will then move accordingly when setting an offset in this "
-"node."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid ""
-"If [code]true[/code], the position between two cached points is interpolated "
-"cubically, and linearly otherwise.\n"
-"The points along the [Curve3D] of the [Path] are precomputed before use, for "
-"faster calculations. The point at the requested offset is then calculated "
-"interpolating between two adjacent cached points. This may present a problem "
-"if the curve makes sharp turns, as the cached points may not follow the "
-"curve closely enough.\n"
-"There are two answers to this problem: either increase the number of cached "
-"points and increase memory consumption, or make a cubic interpolation "
-"between two points at the cost of (slightly) slower calculations."
-msgstr ""
-
-#: doc/classes/PathFollow.xml doc/classes/PathFollow2D.xml
-msgid "The node's offset along the curve."
-msgstr ""
-
-#: doc/classes/PathFollow.xml doc/classes/PathFollow2D.xml
-msgid ""
-"If [code]true[/code], any offset outside the path's length will wrap around, "
-"instead of stopping at the ends. Use it for cyclic paths."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid ""
-"The distance from the first vertex, measured in 3D units along the path. "
-"This sets this node's position to a point within the path."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid ""
-"Allows or forbids rotation on one or more axes, depending on the [enum "
-"RotationMode] constants being used."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid ""
-"The distance from the first vertex, considering 0.0 as the first vertex and "
-"1.0 as the last. This is just another way of expressing the offset within "
-"the path, as the offset supplied is multiplied internally by the path's "
-"length."
-msgstr ""
-
-#: doc/classes/PathFollow.xml doc/classes/PathFollow2D.xml
-msgid "The node's offset perpendicular to the curve."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid "Forbids the PathFollow to rotate."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid "Allows the PathFollow to rotate in the Y axis only."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid "Allows the PathFollow to rotate in both the X, and Y axes."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid "Allows the PathFollow to rotate in any axis."
-msgstr ""
-
-#: doc/classes/PathFollow.xml
-msgid ""
-"Uses the up vector information in a [Curve3D] to enforce orientation. This "
-"rotation mode requires the [Path]'s [member Curve3D.up_vector_enabled] "
-"property to be set to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid "Point sampler for a [Path2D]."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid ""
-"This node takes its parent [Path2D], and returns the coordinates of a point "
-"within it, given a distance from the first vertex.\n"
-"It is useful for making other nodes follow a path, without coding the "
-"movement pattern. For that, the nodes must be children of this node. The "
-"descendant nodes will then move accordingly when setting an offset in this "
-"node."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid ""
-"If [code]true[/code], the position between two cached points is interpolated "
-"cubically, and linearly otherwise.\n"
-"The points along the [Curve2D] of the [Path2D] are precomputed before use, "
-"for faster calculations. The point at the requested offset is then "
-"calculated interpolating between two adjacent cached points. This may "
-"present a problem if the curve makes sharp turns, as the cached points may "
-"not follow the curve closely enough.\n"
-"There are two answers to this problem: either increase the number of cached "
-"points and increase memory consumption, or make a cubic interpolation "
-"between two points at the cost of (slightly) slower calculations."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid ""
-"How far to look ahead of the curve to calculate the tangent if the node is "
-"rotating. E.g. shorter lookaheads will lead to faster rotations."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid "The distance along the path in pixels."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid ""
-"If [code]true[/code], this node rotates to follow the path, making its "
-"descendants rotate."
-msgstr ""
-
-#: doc/classes/PathFollow2D.xml
-msgid ""
-"The distance along the path as a number in the range 0.0 (for the first "
-"vertex) to 1.0 (for the last). This is just another way of expressing the "
-"offset within the path, as the offset supplied is multiplied internally by "
-"the path's length."
-msgstr ""
-
-#: doc/classes/PCKPacker.xml
-msgid "Creates packages that can be loaded into a running project."
-msgstr ""
-
-#: doc/classes/PCKPacker.xml
-msgid ""
-"The [PCKPacker] is used to create packages that can be loaded into a running "
-"project using [method ProjectSettings.load_resource_pack].\n"
-"[codeblock]\n"
-"var packer = PCKPacker.new()\n"
-"packer.pck_start(\"test.pck\")\n"
-"packer.add_file(\"res://text.txt\", \"text.txt\")\n"
-"packer.flush()\n"
-"[/codeblock]\n"
-"The above [PCKPacker] creates package [code]test.pck[/code], then adds a "
-"file named [code]text.txt[/code] at the root of the package."
-msgstr ""
-
-#: doc/classes/PCKPacker.xml
-msgid ""
-"Adds the [code]source_path[/code] file to the current PCK package at the "
-"[code]pck_path[/code] internal path (should start with [code]res://[/code])."
-msgstr ""
-
-#: doc/classes/PCKPacker.xml
-msgid ""
-"Writes the files specified using all [method add_file] calls since the last "
-"flush. If [code]verbose[/code] is [code]true[/code], a list of files added "
-"will be printed to the console for easier debugging."
-msgstr ""
-
-#: doc/classes/PCKPacker.xml
-msgid ""
-"Creates a new PCK file with the name [code]pck_name[/code]. The [code].pck[/"
-"code] file extension isn't added automatically, so it should be part of "
-"[code]pck_name[/code] (even though it's not required)."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Exposes performance-related data."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"This class provides access to a number of different monitors related to "
-"performance, such as memory usage, draw calls, and FPS. These are the same "
-"as the values displayed in the [b]Monitor[/b] tab in the editor's "
-"[b]Debugger[/b] panel. By using the [method get_monitor] method of this "
-"class, you can access this data from your code.\n"
-"[b]Note:[/b] A few of these monitors are only available in debug mode and "
-"will always return 0 when used in a release build.\n"
-"[b]Note:[/b] Many of these monitors are not updated in real-time, so there "
-"may be a short delay between changes."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"Returns the value of one of the available monitors. You should provide one "
-"of the [enum Monitor] constants as the argument, like this:\n"
-"[codeblock]\n"
-"print(Performance.get_monitor(Performance.TIME_FPS)) # Prints the FPS to the "
-"console\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of frames per second."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Time it took to complete one frame, in seconds."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Time it took to complete one physics frame, in seconds."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"Static memory currently used, in bytes. Not available in release builds."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"Dynamic memory currently used, in bytes. Not available in release builds."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Available static memory. Not available in release builds."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Available dynamic memory. Not available in release builds."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"Largest amount of memory the message queue buffer has used, in bytes. The "
-"message queue is used for deferred functions calls and notifications."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of objects currently instanced (including nodes)."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of resources currently used."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"Number of nodes currently instanced in the scene tree. This also includes "
-"the root node."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid ""
-"Number of orphan nodes, i.e. nodes which are not parented to a node of the "
-"scene tree."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "3D objects drawn per frame."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Vertices drawn per frame. 3D only."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Material changes per frame. 3D only."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Shader changes per frame. 3D only."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Render surface changes per frame. 3D only."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Draw calls per frame. 3D only."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Items or joined items drawn per frame."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Draw calls per frame."
-msgstr ""
-
-#: doc/classes/Performance.xml doc/classes/VisualServer.xml
-msgid ""
-"The amount of video memory used, i.e. texture and vertex memory combined."
-msgstr ""
-
-#: doc/classes/Performance.xml doc/classes/VisualServer.xml
-msgid "The amount of texture memory used."
-msgstr ""
-
-#: doc/classes/Performance.xml doc/classes/VisualServer.xml
-msgid "The amount of vertex memory used."
-msgstr ""
-
-#: doc/classes/Performance.xml doc/classes/VisualServer.xml
-msgid ""
-"Unimplemented in the GLES2 and GLES3 rendering backends, always returns 0."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of active [RigidBody2D] nodes in the game."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of collision pairs in the 2D physics engine."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of islands in the 2D physics engine."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of active [RigidBody] and [VehicleBody] nodes in the game."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of collision pairs in the 3D physics engine."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Number of islands in the 3D physics engine."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Output latency of the [AudioServer]."
-msgstr ""
-
-#: doc/classes/Performance.xml
-msgid "Represents the size of the [enum Monitor] enum."
-msgstr ""
-
-#: doc/classes/PHashTranslation.xml
-msgid "Optimized translation."
-msgstr "Optimierte Übersetzung."
-
-#: doc/classes/PHashTranslation.xml
-msgid ""
-"Optimized translation. Uses real-time compressed translations, which results "
-"in very small dictionaries."
-msgstr ""
-
-#: doc/classes/PHashTranslation.xml
-msgid ""
-"Generates and sets an optimized translation from the given [Translation] "
-"resource."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid "Direct access object to a physics body in the [Physics2DServer]."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid ""
-"Provides direct access to a physics body in the [Physics2DServer], allowing "
-"safe changes to physics properties. This object is passed via the direct "
-"state callback of rigid/character bodies, and is intended for changing the "
-"direct state of that body. See [method RigidBody2D._integrate_forces]."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/Physics2DDirectSpaceState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-#: doc/classes/PhysicsDirectSpaceState.xml doc/classes/RayCast.xml
-msgid "Ray-casting"
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml doc/classes/RigidBody2D.xml
-msgid "Adds a constant directional force without affecting rotation."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml doc/classes/RigidBody2D.xml
-msgid ""
-"Adds a positioned force to the body. Both the force and the offset from the "
-"body origin are in global coordinates."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml doc/classes/RigidBody2D.xml
-msgid "Adds a constant rotational force."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml doc/classes/RigidBody2D.xml
-msgid "Applies a directional impulse without affecting rotation."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid ""
-"Applies a positioned impulse to the body. An impulse is time-independent! "
-"Applying an impulse every frame would result in a framerate-dependent force. "
-"For this reason, it should only be used when simulating one-time impacts "
-"(use the \"_force\" functions otherwise). The offset uses the rotation of "
-"the global coordinate system, but is centered at the object's origin."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml doc/classes/RigidBody2D.xml
-msgid "Applies a rotational impulse to the body."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the collider's [RID]."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the collider's object id."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid ""
-"Returns the collider object. This depends on how it was created (will return "
-"a scene node if such was used to create it)."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the contact position in the collider."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the collider's shape index."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid ""
-"Returns the collided shape's metadata. This metadata is different from "
-"[method Object.get_meta], and is set with [method Physics2DServer."
-"shape_set_data]."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the linear velocity vector at the collider's contact point."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid ""
-"Returns the number of contacts this body has with other bodies.\n"
-"[b]Note:[/b] By default, this returns 0 unless bodies are configured to "
-"monitor contacts. See [member RigidBody2D.contact_monitor]."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the local normal at the contact point."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the local position of the contact point."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the local shape index of the collision."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the current state of the space, useful for queries."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Returns the body's velocity at the given relative position, including both "
-"translation and rotation."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Calls the built-in force integration code."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml doc/classes/RigidBody2D.xml
-msgid "The body's rotational velocity in [i]radians[/i] per second."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "The inverse of the inertia of the body."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "The inverse of the mass of the body."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-msgid "The body's linear velocity in pixels per second."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "If [code]true[/code], this body is currently sleeping (not active)."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "The timestep (delta) used for the simulation."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"The rate at which the body stops rotating, if there are not any other forces "
-"moving it."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "The total gravity vector being currently applied to this body."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"The rate at which the body stops moving, if there are not any other forces "
-"moving it."
-msgstr ""
-
-#: doc/classes/Physics2DDirectBodyState.xml
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "The body's transformation matrix."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid "Direct access object to a space in the [Physics2DServer]."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Direct access object to a space in the [Physics2DServer]. It's used mainly "
-"to do queries against objects and areas residing in a given space."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Checks how far a [Shape2D] can move without colliding. All the parameters "
-"for the query, including the shape and the motion, are supplied through a "
-"[Physics2DShapeQueryParameters] object.\n"
-"Returns an array with the safe and unsafe proportions (between 0 and 1) of "
-"the motion. The safe proportion is the maximum fraction of the motion that "
-"can be made without a collision. The unsafe proportion is the minimum "
-"fraction of the distance that must be moved for a collision. If no collision "
-"is detected a result of [code][1.0, 1.0][/code] will be returned.\n"
-"[b]Note:[/b] Any [Shape2D]s that the shape is already colliding with e.g. "
-"inside of, will be ignored. Use [method collide_shape] to determine the "
-"[Shape2D]s that the shape is already colliding with."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Checks the intersections of a shape, given through a "
-"[Physics2DShapeQueryParameters] object, against the space. The resulting "
-"array contains a list of points where the shape intersects another. Like "
-"with [method intersect_shape], the number of returned results can be limited "
-"to save processing time."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Checks the intersections of a shape, given through a "
-"[Physics2DShapeQueryParameters] object, against the space. If it collides "
-"with more than one shape, the nearest one is selected. If the shape did not "
-"intersect anything, then an empty dictionary is returned instead.\n"
-"[b]Note:[/b] This method does not take into account the [code]motion[/code] "
-"property of the object. The returned object is a dictionary containing the "
-"following fields:\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]linear_velocity[/code]: The colliding object's velocity [Vector2]. If "
-"the object is an [Area2D], the result is [code](0, 0)[/code].\n"
-"[code]metadata[/code]: The intersecting shape's metadata. This metadata is "
-"different from [method Object.get_meta], and is set with [method "
-"Physics2DServer.shape_set_data].\n"
-"[code]normal[/code]: The object's surface normal at the intersection point.\n"
-"[code]point[/code]: The intersection point.\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Checks whether a point is inside any solid shape. The shapes the point is "
-"inside of are returned in an array containing dictionaries with the "
-"following fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]metadata[/code]: The intersecting shape's metadata. This metadata is "
-"different from [method Object.get_meta], and is set with [method "
-"Physics2DServer.shape_set_data].\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"The number of intersections can be limited with the [code]max_results[/code] "
-"parameter, to reduce the processing time.\n"
-"Additionally, the method can take an [code]exclude[/code] array of objects "
-"or [RID]s that are to be excluded from collisions, a [code]collision_mask[/"
-"code] bitmask representing the physics layers to check in, or booleans to "
-"determine if the ray should collide with [PhysicsBody2D]s or [Area2D]s, "
-"respectively.\n"
-"[b]Note:[/b] [ConcavePolygonShape2D]s and [CollisionPolygon2D]s in "
-"[code]Segments[/code] build mode are not solid shapes. Therefore, they will "
-"not be detected."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Checks whether a point is inside any solid shape, in a specific canvas layer "
-"given by [code]canvas_instance_id[/code]. The shapes the point is inside of "
-"are returned in an array containing dictionaries with the following fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]metadata[/code]: The intersecting shape's metadata. This metadata is "
-"different from [method Object.get_meta], and is set with [method "
-"Physics2DServer.shape_set_data].\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"The number of intersections can be limited with the [code]max_results[/code] "
-"parameter, to reduce the processing time.\n"
-"Additionally, the method can take an [code]exclude[/code] array of objects "
-"or [RID]s that are to be excluded from collisions, a [code]collision_mask[/"
-"code] bitmask representing the physics layers to check in, or booleans to "
-"determine if the ray should collide with [PhysicsBody2D]s or [Area2D]s, "
-"respectively.\n"
-"[b]Note:[/b] [ConcavePolygonShape2D]s and [CollisionPolygon2D]s in "
-"[code]Segments[/code] build mode are not solid shapes. Therefore, they will "
-"not be detected."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Intersects a ray in a given space. The returned object is a dictionary with "
-"the following fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]metadata[/code]: The intersecting shape's metadata. This metadata is "
-"different from [method Object.get_meta], and is set with [method "
-"Physics2DServer.shape_set_data].\n"
-"[code]normal[/code]: The object's surface normal at the intersection point.\n"
-"[code]position[/code]: The intersection point.\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"If the ray did not intersect anything, then an empty dictionary is returned "
-"instead.\n"
-"Additionally, the method can take an [code]exclude[/code] array of objects "
-"or [RID]s that are to be excluded from collisions, a [code]collision_mask[/"
-"code] bitmask representing the physics layers to check in, or booleans to "
-"determine if the ray should collide with [PhysicsBody2D]s or [Area2D]s, "
-"respectively."
-msgstr ""
-
-#: doc/classes/Physics2DDirectSpaceState.xml
-msgid ""
-"Checks the intersections of a shape, given through a "
-"[Physics2DShapeQueryParameters] object, against the space. The intersected "
-"shapes are returned in an array containing dictionaries with the following "
-"fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]metadata[/code]: The intersecting shape's metadata. This metadata is "
-"different from [method Object.get_meta], and is set with [method "
-"Physics2DServer.shape_set_data].\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"The number of intersections can be limited with the [code]max_results[/code] "
-"parameter, to reduce the processing time."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Server interface for low-level 2D physics access."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Physics2DServer is the server responsible for all 2D physics. It can create "
-"many kinds of physics objects, but does not insert them on the node tree."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Adds a shape to the area, along with a transform matrix. Shapes are usually "
-"referenced by their index, so you should track which shape has a given index."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Assigns the area to a descendant of [Object], so it can exist in the node "
-"tree."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Removes all shapes from an area. It does not delete the shapes, so they can "
-"be reassigned later."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Creates an [Area2D]. After creating an [Area2D] with this method, assign it "
-"to a space using [method area_set_space] to use the created [Area2D] in the "
-"physics world."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Gets the instance ID of the object the area is assigned to."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Returns an area parameter value. See [enum AreaParameter] for a list of "
-"available parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the [RID] of the nth shape of an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the number of shapes assigned to an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the transform matrix of a shape within an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the space assigned to the area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the space override mode for the area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the transform matrix for an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Removes a shape from an area. It does not delete the shape, so it can be "
-"reassigned later."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Assigns the area to one or many physics layers."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Sets which physics layers the area will monitor."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the function to call when any body/area enters or exits the area. This "
-"callback will be called for any object interacting with the area, and takes "
-"five parameters:\n"
-"1: [constant AREA_BODY_ADDED] or [constant AREA_BODY_REMOVED], depending on "
-"whether the object entered or exited the area.\n"
-"2: [RID] of the object that entered/exited the area.\n"
-"3: Instance ID of the object that entered/exited the area.\n"
-"4: The shape index of the object that entered/exited the area.\n"
-"5: The shape index of the area where the object entered/exited."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the value for an area parameter. See [enum AreaParameter] for a list of "
-"available parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Substitutes a given area shape by another. The old shape is selected by its "
-"index, the new one by its [RID]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Disables a given shape in an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Sets the transform matrix for an area shape."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Assigns a space to the area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the space override mode for the area. See [enum AreaSpaceOverrideMode] "
-"for a list of available modes."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Sets the transform matrix for an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Adds a body to the list of bodies exempt from collisions."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Adds a positioned force to the applied force and torque. As with [method "
-"body_apply_impulse], both the force and the offset from the body origin are "
-"in global coordinates. A force differs from an impulse in that, while the "
-"two are forces, the impulse clears itself after being applied."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Adds a shape to the body, along with a transform matrix. Shapes are usually "
-"referenced by their index, so you should track which shape has a given index."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Adds a positioned impulse to the applied force and torque. Both the force "
-"and the offset from the body origin are in global coordinates."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Removes all shapes from a body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Creates a physics body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the physics layer or layers a body belongs to."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the physics layer or layers a body can collide with."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Returns the continuous collision detection mode."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Returns the [Physics2DDirectBodyState] of the body. Returns [code]null[/"
-"code] if the body is destroyed or removed from the physics space."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Returns the maximum contacts that can be reported. See [method "
-"body_set_max_contacts_reported]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the body mode."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Returns the value of a body parameter. See [enum BodyParameter] for a list "
-"of available parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the [RID] of the nth shape of a body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the number of shapes assigned to a body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Returns the metadata of a shape of a body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the transform matrix of a body shape."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the [RID] of the space assigned to a body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns a body state."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Returns whether a body uses a callback function to calculate its own physics "
-"(see [method body_set_force_integration_callback])."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Removes a body from the list of bodies exempt from collisions."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Removes a shape from a body. The shape is not deleted, so it can be reused "
-"afterwards."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-#: doc/classes/RigidBody.xml
-msgid ""
-"Sets an axis velocity. The velocity in the given vector axis will be set as "
-"the given vector length. This is useful for jumping behavior."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Sets the physics layer or layers a body belongs to."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Sets the physics layer or layers a body can collide with."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the continuous collision detection mode using one of the [enum CCDMode] "
-"constants.\n"
-"Continuous collision detection tries to predict where a moving body will "
-"collide, instead of moving it and correcting its movement if it collided."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the function used to calculate physics for an object, if that object "
-"allows it (see [method body_set_omit_force_integration])."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the maximum contacts to report. Bodies can keep a log of the contacts "
-"with other bodies, this is enabled by setting the maximum amount of contacts "
-"reported to a number greater than 0."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Sets the body mode using one of the [enum BodyMode] constants."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Sets whether a body uses a callback function to calculate its own physics "
-"(see [method body_set_force_integration_callback])."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets a body parameter. See [enum BodyParameter] for a list of available "
-"parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Substitutes a given body shape by another. The old shape is selected by its "
-"index, the new one by its [RID]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Enables one way collision on body if [code]enable[/code] is [code]true[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Disables shape in body if [code]disable[/code] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets metadata of a shape within a body. This metadata is different from "
-"[method Object.set_meta], and can be retrieved on shape queries."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Sets the transform matrix for a body shape."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Assigns a space to the body (see [method space_create])."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets a body state using one of the [enum BodyState] constants.\n"
-"Note that the method doesn't take effect immediately. The state will change "
-"on the next physics frame."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Returns [code]true[/code] if a collision would result from moving in the "
-"given direction from a given point in space. Margin increases the size of "
-"the shapes involved in the collision detection. [Physics2DTestMotionResult] "
-"can be passed to return additional information in."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Creates a damped spring joint between two bodies. If not specified, the "
-"second body is assumed to be the joint itself."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-#, fuzzy
-msgid "Returns the value of a damped spring joint parameter."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets a damped spring joint parameter. See [enum DampedStringParam] for a "
-"list of available parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Destroys any of the objects created by Physics2DServer. If the [RID] passed "
-"is not one of the objects that can be created by Physics2DServer, an error "
-"will be sent to the console."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Returns information about the current state of the 2D physics engine. See "
-"[enum ProcessInfo] for a list of available states."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Creates a groove joint between two bodies. If not specified, the bodies are "
-"assumed to be the joint itself."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Returns the value of a joint parameter."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Returns a joint's type (see [enum JointType])."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets a joint parameter. See [enum JointParam] for a list of available "
-"parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Creates a pin joint between two bodies. If not specified, the second body is "
-"assumed to be the joint itself."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Activates or deactivates the 2D physics engine."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the amount of iterations for calculating velocities of colliding "
-"bodies. The greater the amount of iterations, the more accurate the "
-"collisions will be. However, a greater amount of iterations requires more "
-"CPU power, which can decrease performance. The default value is [code]8[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the shape data."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Returns a shape's type (see [enum ShapeType])."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the shape data that defines its shape and size. The data to be passed "
-"depends on the kind of shape created [method shape_get_type]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Creates a space. A space is a collection of parameters for the physics "
-"engine that can be assigned to an area or a body. It can be assigned to an "
-"area with [method area_set_space], or to a body with [method body_set_space]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Returns the state of a space, a [Physics2DDirectSpaceState]. This object can "
-"be used to make collision/intersection queries."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns the value of a space parameter."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Returns whether the space is active."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Marks a space as active. It will not have an effect, unless it is assigned "
-"to an area or body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the value for a space parameter. See [enum SpaceParameter] for a list "
-"of available parameters."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the maximum distance a pair of bodies has to move before "
-"their collision status has to be recalculated."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the maximum distance a shape can be from another before "
-"they are considered separated."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the maximum distance a shape can penetrate another shape "
-"before it is considered a collision."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the threshold linear velocity of activity. A body marked "
-"as potentially inactive for both linear and angular velocity will be put to "
-"sleep after the time given."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the threshold angular velocity of activity. A body "
-"marked as potentially inactive for both linear and angular velocity will be "
-"put to sleep after the time given."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the maximum time of activity. A body marked as "
-"potentially inactive for both linear and angular velocity will be put to "
-"sleep after this time."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the default solver bias for all physics constraints. A "
-"solver bias is a factor controlling how much two objects \"rebound\", after "
-"violating a constraint, to avoid leaving them in that state because of "
-"numerical imprecision."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating line shapes. A line shape is an infinite "
-"line with an origin point, and a normal. Thus, it can be used for front/"
-"behind checks."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating segment shapes. A segment shape is a line "
-"from a point A to a point B. It can be checked for intersections."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating circle shapes. A circle shape only has a "
-"radius. It can be used for intersections and inside/outside checks."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating rectangle shapes. A rectangle shape is "
-"defined by a width and a height. It can be used for intersections and inside/"
-"outside checks."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating capsule shapes. A capsule shape is defined "
-"by a radius and a length. It can be used for intersections and inside/"
-"outside checks."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating convex polygon shapes. A polygon is "
-"defined by a list of points. It can be used for intersections and inside/"
-"outside checks. Unlike the [member CollisionPolygon2D.polygon] property, "
-"polygons modified with [method shape_set_data] do not verify that the points "
-"supplied form is a convex polygon."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"This is the constant for creating concave polygon shapes. A polygon is "
-"defined by a list of points. It can be used for intersections checks, but "
-"not for inside/outside checks."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This constant is used internally by the engine. Any attempt to create this "
-"kind of shape results in an error."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get gravity strength in an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get gravity vector/center in an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get whether the gravity vector of an area is a direction, or "
-"a center point."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to set/get the falloff factor for point gravity of an area. The "
-"greater this value is, the faster the strength of gravity decreases with the "
-"square of distance."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This constant was used to set/get the falloff factor for point gravity. It "
-"has been superseded by [constant AREA_PARAM_GRAVITY_DISTANCE_SCALE]."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get the linear dampening factor of an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get the angular dampening factor of an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get the priority (order of processing) of an area."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This area does not affect gravity/damp. These are generally areas that exist "
-"only to detect collisions, and objects entering or exiting them."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This area adds its gravity/damp values to whatever has been calculated so "
-"far. This way, many overlapping areas can combine their physics to make "
-"interesting effects."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This area adds its gravity/damp values to whatever has been calculated so "
-"far. Then stops taking into account the rest of the areas, even the default "
-"one."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This area replaces any gravity/damp, even the default one, and stops taking "
-"into account the rest of the areas."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"This area replaces any gravity/damp calculated so far, but keeps calculating "
-"the rest of the areas, down to the default one."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant for static bodies."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant for kinematic bodies."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant for rigid bodies."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant for rigid bodies in character mode. In this mode, a body can not "
-"rotate, and only its linear velocity is affected by physics."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get a body's bounce factor."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get a body's friction."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get a body's mass."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Constant to set/get a body's inertia."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get a body's gravity multiplier."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get a body's linear dampening factor."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get a body's angular dampening factor."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Represents the size of the [enum BodyParameter] enum."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get the current transform matrix of the body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get the current linear velocity of the body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get the current angular velocity of the body."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to sleep/wake up a body, or to get whether it is sleeping."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to set/get whether the body can sleep."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Constant to create pin joints."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Constant to create groove joints."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid "Constant to create damped spring joints."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the resting length of the spring joint. The joint will always try to go "
-"to back this length when pulled apart."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the stiffness of the spring joint. The joint applies a force equal to "
-"the stiffness times the distance from its resting length."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Sets the damping ratio of the spring joint. A value of 0 indicates an "
-"undamped spring, while 1 causes the system to reach equilibrium as fast as "
-"possible (critical damping)."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Disables continuous collision detection. This is the fastest way to detect "
-"body collisions, but can miss small, fast-moving objects."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Enables continuous collision detection by raycasting. It is faster than "
-"shapecasting, but less precise."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml
-msgid ""
-"Enables continuous collision detection by shapecasting. It is the slowest "
-"CCD method, and the most precise."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The value of the first parameter and area callback function receives, when "
-"an object enters one of its shapes."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"The value of the first parameter and area callback function receives, when "
-"an object exits one of its shapes."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to get the number of objects that are not sleeping."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid "Constant to get the number of possible collisions."
-msgstr ""
-
-#: doc/classes/Physics2DServer.xml doc/classes/PhysicsServer.xml
-msgid ""
-"Constant to get the number of space regions where a collision could occur."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-msgid "Parameters to be sent to a 2D shape physics query."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-msgid ""
-"This class contains the shape and other parameters for 2D intersection/"
-"collision queries."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-msgid ""
-"Sets the [Shape2D] that will be used for collision/intersection queries."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-msgid "If [code]true[/code], the query will take [Area2D]s into account."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-msgid ""
-"If [code]true[/code], the query will take [PhysicsBody2D]s into account."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid ""
-"The physics layer(s) the query will take into account (as a bitmask). See "
-"[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-"
-"and-masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid ""
-"The list of objects or object [RID]s that will be excluded from collisions."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid "The collision margin for the shape."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-msgid "The motion of the shape being queried for."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid "The queried shape's [RID]. See also [method set_shape]."
-msgstr ""
-
-#: doc/classes/Physics2DShapeQueryParameters.xml
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid "The queried shape's transform matrix."
-msgstr ""
-
-#: doc/classes/PhysicsBody.xml
-msgid "Base class for all objects affected by physics in 3D space."
-msgstr ""
-
-#: doc/classes/PhysicsBody.xml
-msgid ""
-"PhysicsBody is an abstract base class for implementing a physics body. All "
-"*Body types inherit from it."
-msgstr ""
-
-#: doc/classes/PhysicsBody.xml doc/classes/PhysicsBody2D.xml
-#: doc/classes/SoftBody.xml
-msgid "Adds a body to the list of bodies that this body can't collide with."
-msgstr ""
-
-#: doc/classes/PhysicsBody.xml doc/classes/PhysicsBody2D.xml
-#: doc/classes/SoftBody.xml
-msgid ""
-"Returns an array of nodes that were added as collision exceptions for this "
-"body."
-msgstr ""
-
-#: doc/classes/PhysicsBody.xml doc/classes/PhysicsBody2D.xml
-#: doc/classes/SoftBody.xml
-msgid ""
-"Removes a body from the list of bodies that this body can't collide with."
-msgstr ""
-
-#: doc/classes/PhysicsBody2D.xml
-msgid "Base class for all objects affected by physics in 2D space."
-msgstr ""
-
-#: doc/classes/PhysicsBody2D.xml
-msgid ""
-"PhysicsBody2D is an abstract base class for implementing a physics body. All "
-"*Body2D types inherit from it."
-msgstr ""
-
-#: doc/classes/PhysicsBody2D.xml
-msgid ""
-"Both collision_layer and collision_mask. Returns collision_layer when "
-"accessed. Updates collision_layer and collision_mask when modified."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Direct access object to a physics body in the [PhysicsServer]."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Provides direct access to a physics body in the [PhysicsServer], allowing "
-"safe changes to physics properties. This object is passed via the direct "
-"state callback of rigid/character bodies, and is intended for changing the "
-"direct state of that body. See [method RigidBody._integrate_forces]."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Adds a constant directional force without affecting rotation.\n"
-"This is equivalent to [code]add_force(force, Vector3(0,0,0))[/code]."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Adds a constant rotational force without affecting position."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Applies a single directional impulse without affecting rotation.\n"
-"This is equivalent to [code]apply_impulse(Vector3(0, 0, 0), impulse)[/code]."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Applies a positioned impulse to the body. An impulse is time-independent! "
-"Applying an impulse every frame would result in a framerate-dependent force. "
-"For this reason it should only be used when simulating one-time impacts. The "
-"position uses the rotation of the global coordinate system, but is centered "
-"at the object's origin."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Apply a torque impulse (which will be affected by the body mass and shape). "
-"This will rotate the body around the vector [code]j[/code] passed as "
-"parameter."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Returns the collider object."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid ""
-"Returns the number of contacts this body has with other bodies.\n"
-"[b]Note:[/b] By default, this returns 0 unless bodies are configured to "
-"monitor contacts. See [member RigidBody.contact_monitor]."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "Impulse created by the contact. Only implemented for Bullet physics."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml doc/classes/RigidBody.xml
-msgid ""
-"The body's rotational velocity in axis-angle format. The magnitude of the "
-"vector is the rotation rate in [i]radians[/i] per second."
-msgstr ""
-
-#: doc/classes/PhysicsDirectBodyState.xml
-msgid "The body's linear velocity in units per second."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid "Direct access object to a space in the [PhysicsServer]."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Direct access object to a space in the [PhysicsServer]. It's used mainly to "
-"do queries against objects and areas residing in a given space."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Checks how far a [Shape] can move without colliding. All the parameters for "
-"the query, including the shape, are supplied through a "
-"[PhysicsShapeQueryParameters] object.\n"
-"Returns an array with the safe and unsafe proportions (between 0 and 1) of "
-"the motion. The safe proportion is the maximum fraction of the motion that "
-"can be made without a collision. The unsafe proportion is the minimum "
-"fraction of the distance that must be moved for a collision. If no collision "
-"is detected a result of [code][1.0, 1.0][/code] will be returned.\n"
-"[b]Note:[/b] Any [Shape]s that the shape is already colliding with e.g. "
-"inside of, will be ignored. Use [method collide_shape] to determine the "
-"[Shape]s that the shape is already colliding with."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Checks the intersections of a shape, given through a "
-"[PhysicsShapeQueryParameters] object, against the space. The resulting array "
-"contains a list of points where the shape intersects another. Like with "
-"[method intersect_shape], the number of returned results can be limited to "
-"save processing time."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Checks the intersections of a shape, given through a "
-"[PhysicsShapeQueryParameters] object, against the space. If it collides with "
-"more than one shape, the nearest one is selected. The returned object is a "
-"dictionary containing the following fields:\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]linear_velocity[/code]: The colliding object's velocity [Vector3]. If "
-"the object is an [Area], the result is [code](0, 0, 0)[/code].\n"
-"[code]normal[/code]: The object's surface normal at the intersection point.\n"
-"[code]point[/code]: The intersection point.\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"If the shape did not intersect anything, then an empty dictionary is "
-"returned instead."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Checks whether a point is inside any solid shape. The shapes the point is "
-"inside of are returned in an array containing dictionaries with the "
-"following fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"The number of intersections can be limited with the [code]max_results[/code] "
-"parameter, to reduce the processing time.\n"
-"Additionally, the method can take an [code]exclude[/code] array of objects "
-"or [RID]s that are to be excluded from collisions, a [code]collision_mask[/"
-"code] bitmask representing the physics layers to check in, or booleans to "
-"determine if the ray should collide with [PhysicsBody]s or [Area]s, "
-"respectively."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Intersects a ray in a given space. The returned object is a dictionary with "
-"the following fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]normal[/code]: The object's surface normal at the intersection point.\n"
-"[code]position[/code]: The intersection point.\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"If the ray did not intersect anything, then an empty dictionary is returned "
-"instead.\n"
-"Additionally, the method can take an [code]exclude[/code] array of objects "
-"or [RID]s that are to be excluded from collisions, a [code]collision_mask[/"
-"code] bitmask representing the physics layers to check in, or booleans to "
-"determine if the ray should collide with [PhysicsBody]s or [Area]s, "
-"respectively."
-msgstr ""
-
-#: doc/classes/PhysicsDirectSpaceState.xml
-msgid ""
-"Checks the intersections of a shape, given through a "
-"[PhysicsShapeQueryParameters] object, against the space. The intersected "
-"shapes are returned in an array containing dictionaries with the following "
-"fields:\n"
-"[code]collider[/code]: The colliding object.\n"
-"[code]collider_id[/code]: The colliding object's ID.\n"
-"[code]rid[/code]: The intersecting object's [RID].\n"
-"[code]shape[/code]: The shape index of the colliding shape.\n"
-"The number of intersections can be limited with the [code]max_results[/code] "
-"parameter, to reduce the processing time."
-msgstr ""
-
-#: doc/classes/PhysicsMaterial.xml
-msgid "A material for physics properties."
-msgstr ""
-
-#: doc/classes/PhysicsMaterial.xml
-msgid ""
-"Provides a means of modifying the collision properties of a [PhysicsBody]."
-msgstr ""
-
-#: doc/classes/PhysicsMaterial.xml
-msgid ""
-"If [code]true[/code], subtracts the bounciness from the colliding object's "
-"bounciness instead of adding it."
-msgstr ""
-
-#: doc/classes/PhysicsMaterial.xml
-msgid ""
-"The body's bounciness. Values range from [code]0[/code] (no bounce) to "
-"[code]1[/code] (full bounciness)."
-msgstr ""
-
-#: doc/classes/PhysicsMaterial.xml
-msgid ""
-"The body's friction. Values range from [code]0[/code] (frictionless) to "
-"[code]1[/code] (maximum friction)."
-msgstr ""
-
-#: doc/classes/PhysicsMaterial.xml
-msgid ""
-"If [code]true[/code], the physics engine will use the friction of the object "
-"marked as \"rough\" when two objects collide. If [code]false[/code], the "
-"physics engine will use the lowest friction of all colliding objects "
-"instead. If [code]true[/code] for both colliding objects, the physics engine "
-"will use the highest friction."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Server interface for low-level physics access."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"PhysicsServer is the server responsible for all 3D physics. It can create "
-"many kinds of physics objects, but does not insert them on the node tree."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Creates an [Area]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns an area parameter value. A list of available parameters is on the "
-"[enum AreaParameter] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If [code]true[/code], area collides with rays."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the value for an area parameter. A list of available parameters is on "
-"the [enum AreaParameter] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets object pickable with rays."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the space override mode for the area. The modes are described in the "
-"[enum AreaSpaceOverrideMode] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Gives the body a push at a [code]position[/code] in the direction of the "
-"[code]impulse[/code]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Gives the body a push to rotate it."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Creates a physics body. The first parameter can be any value from [enum "
-"BodyMode] constants, for the type of body created. Additionally, the body "
-"can be created in sleeping state to save processing time."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns the [PhysicsDirectBodyState] of the body. Returns [code]null[/code] "
-"if the body is destroyed or removed from the physics space."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns the value of a body parameter. A list of available parameters is on "
-"the [enum BodyParameter] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"If [code]true[/code], the continuous collision detection mode is enabled."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If [code]true[/code], the body can be detected by rays."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Removes a body from the list of bodies exempt from collisions.\n"
-"Continuous collision detection tries to predict where a moving body will "
-"collide, instead of moving it and correcting its movement if it collided."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"If [code]true[/code], the continuous collision detection mode is enabled.\n"
-"Continuous collision detection tries to predict where a moving body will "
-"collide, instead of moving it and correcting its movement if it collided."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets the body mode, from one of the [enum BodyMode] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets a body parameter. A list of available parameters is on the [enum "
-"BodyParameter] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets the body pickable with rays if [code]enabled[/code] is set."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets a body state (see [enum BodyState] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns [code]true[/code] if a collision would result from moving in the "
-"given direction from a given point in space. [PhysicsTestMotionResult] can "
-"be passed to return additional information in."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Gets a cone_twist_joint parameter (see [enum ConeTwistJointParam] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets a cone_twist_joint parameter (see [enum ConeTwistJointParam] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Destroys any of the objects created by PhysicsServer. If the [RID] passed is "
-"not one of the objects that can be created by PhysicsServer, an error will "
-"be sent to the console."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Gets a generic_6_DOF_joint flag (see [enum G6DOFJointAxisFlag] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Gets a generic_6_DOF_joint parameter (see [enum G6DOFJointAxisParam] "
-"constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets a generic_6_DOF_joint flag (see [enum G6DOFJointAxisFlag] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets a generic_6_DOF_joint parameter (see [enum G6DOFJointAxisParam] "
-"constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns information about the current state of the 3D physics engine. See "
-"[enum ProcessInfo] for a list of available states. Only implemented for "
-"Godot Physics."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Gets a hinge_joint flag (see [enum HingeJointFlag] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Gets a hinge_joint parameter (see [enum HingeJointParam])."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets a hinge_joint flag (see [enum HingeJointFlag] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets a hinge_joint parameter (see [enum HingeJointParam] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Creates a [ConeTwistJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Creates a [Generic6DOFJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Creates a [HingeJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Creates a [PinJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Creates a [SliderJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-#, fuzzy
-msgid "Gets the priority value of the Joint."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/PhysicsServer.xml
-#, fuzzy
-msgid "Returns the type of the Joint."
-msgstr "Gibt die Größe des Arrays zurück."
-
-#: doc/classes/PhysicsServer.xml
-#, fuzzy
-msgid "Sets the priority value of the Joint."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns position of the joint in the local space of body a of the joint."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns position of the joint in the local space of body b of the joint."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Gets a pin_joint parameter (see [enum PinJointParam] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets position of the joint in the local space of body a of the joint."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets position of the joint in the local space of body b of the joint."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Sets a pin_joint parameter (see [enum PinJointParam] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Activates or deactivates the 3D physics engine."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the amount of iterations for calculating velocities of colliding "
-"bodies. The greater the amount of iterations, the more accurate the "
-"collisions will be. However, a greater amount of iterations requires more "
-"CPU power, which can decrease performance. The default value is [code]8[/"
-"code].\n"
-"[b]Note:[/b] Only has an effect when using the GodotPhysics engine, not the "
-"default Bullet physics engine."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Creates a shape of a type from [enum ShapeType]. Does not assign it to a "
-"body or an area. To do so, you must use [method area_set_shape] or [method "
-"body_set_shape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Returns the type of shape (see [enum ShapeType] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Gets a slider_joint parameter (see [enum SliderJointParam] constants)."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Returns the state of a space, a [PhysicsDirectSpaceState]. This object can "
-"be used to make collision/intersection queries."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"Sets the value for a space parameter. A list of available parameters is on "
-"the [enum SpaceParameter] constants."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-#, fuzzy
-msgid "The [Joint] is a [PinJoint]."
-msgstr "Das [Input] Singleton."
-
-#: doc/classes/PhysicsServer.xml
-#, fuzzy
-msgid "The [Joint] is a [HingeJoint]."
-msgstr "Das [Input] Singleton."
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Joint] is a [SliderJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Joint] is a [ConeTwistJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Joint] is a [Generic6DOFJoint]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"The strength with which the pinned objects try to stay in positional "
-"relation to each other.\n"
-"The higher, the stronger."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"The strength with which the pinned objects try to stay in velocity relation "
-"to each other.\n"
-"The higher, the stronger."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"If above 0, this value is the maximum value for an impulse that this Joint "
-"puts on its ends."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The maximum rotation across the Hinge."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The minimum rotation across the Hinge."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If [code]true[/code], the Hinge has a maximum and a minimum rotation."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If [code]true[/code], a motor turns the Hinge."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The maximum difference between the pivot points on their X axis before "
-"damping happens."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The minimum difference between the pivot points on their X axis before "
-"damping happens."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"A factor applied to the movement across the slider axis once the limits get "
-"surpassed. The lower, the slower the movement."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The amount of restitution once the limits are surpassed. The lower, the more "
-"velocityenergy gets lost."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of damping once the slider limits are surpassed."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"A factor applied to the movement across the slider axis as long as the "
-"slider is in the limits. The lower, the slower the movement."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of restitution inside the slider limits."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of damping inside the slider limits."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "A factor applied to the movement across axes orthogonal to the slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The amount of restitution when movement is across axes orthogonal to the "
-"slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The amount of damping when movement is across axes orthogonal to the slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The upper limit of rotation in the slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The lower limit of rotation in the slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "A factor applied to the all rotation once the limit is surpassed."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of restitution of the rotation when the limit is surpassed."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of damping of the rotation when the limit is surpassed."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "A factor that gets applied to the all rotation in the limits."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of restitution of the rotation in the limits."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid "The amount of damping of the rotation in the limits."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"A factor that gets applied to the all rotation across axes orthogonal to the "
-"slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The amount of restitution of the rotation across axes orthogonal to the "
-"slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml doc/classes/SliderJoint.xml
-msgid ""
-"The amount of damping of the rotation across axes orthogonal to the slider."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "Represents the size of the [enum SliderJointParam] enum."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"The ease with which the Joint twists, if it's too low, it takes more force "
-"to twist the joint."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"A factor that gets applied to the movement across the axes. The lower, the "
-"slower the movement."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"The amount of restitution on the axes movement. The lower, the more velocity-"
-"energy gets lost."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The velocity that the joint's linear motor will attempt to reach."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"The maximum force that the linear motor can apply while trying to reach the "
-"target velocity."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "A factor that gets multiplied onto all rotations across the axes."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"When correcting the crossing of limits in rotation across the axes, this "
-"error tolerance factor defines how much the correction gets slowed down. The "
-"lower, the slower."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If set, linear motion is possible within the given limits."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If set, rotational motion is possible."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "If set, there is a rotational motor across these axes."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid ""
-"If set, there is a linear motor on this axis that targets a specific "
-"velocity."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [PlaneShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [RayShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [SphereShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [BoxShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [CapsuleShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [CylinderShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [ConvexPolygonShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [ConcavePolygonShape]."
-msgstr ""
-
-#: doc/classes/PhysicsServer.xml
-msgid "The [Shape] is a [HeightMapShape]."
-msgstr ""
-
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid "Parameters to be sent to a 3D shape physics query."
-msgstr ""
-
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid ""
-"This class contains the shape and other parameters for 3D intersection/"
-"collision queries."
-msgstr ""
-
-#: doc/classes/PhysicsShapeQueryParameters.xml
-msgid "Sets the [Shape] that will be used for collision/intersection queries."
-msgstr ""
-
-#: doc/classes/PhysicsShapeQueryParameters.xml
-#, fuzzy
-msgid "If [code]true[/code], the query will take [Area]s into account."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/PhysicsShapeQueryParameters.xml
-#, fuzzy
-msgid "If [code]true[/code], the query will take [PhysicsBody]s into account."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/PinJoint.xml
-msgid "Pin joint for 3D PhysicsBodies."
-msgstr ""
-
-#: doc/classes/PinJoint.xml
-msgid ""
-"Pin joint for 3D rigid bodies. It pins 2 bodies (rigid or static) together. "
-"See also [Generic6DOFJoint]."
-msgstr ""
-
-#: doc/classes/PinJoint.xml
-msgid ""
-"The force with which the pinned objects stay in positional relation to each "
-"other. The higher, the stronger."
-msgstr ""
-
-#: doc/classes/PinJoint.xml
-msgid ""
-"The force with which the pinned objects stay in velocity relation to each "
-"other. The higher, the stronger."
-msgstr ""
-
-#: doc/classes/PinJoint.xml
-msgid ""
-"If above 0, this value is the maximum value for an impulse that this Joint "
-"produces."
-msgstr ""
-
-#: doc/classes/PinJoint2D.xml
-msgid "Pin Joint for 2D shapes."
-msgstr ""
-
-#: doc/classes/PinJoint2D.xml
-msgid ""
-"Pin Joint for 2D rigid bodies. It pins two bodies (rigid or static) together."
-msgstr ""
-
-#: doc/classes/PinJoint2D.xml
-msgid ""
-"The higher this value, the more the bond to the pinned partner can flex."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "Plane in hessian form."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Plane represents a normalized plane equation. Basically, \"normal\" is the "
-"normal of the plane (a,b,c normalized), and \"d\" is the distance from the "
-"origin to the plane (in the direction of \"normal\"). \"Over\" or \"Above\" "
-"the plane is considered the side of the plane towards where the normal is "
-"pointing."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Creates a plane from the four parameters. The three components of the "
-"resulting plane's [member normal] are [code]a[/code], [code]b[/code] and "
-"[code]c[/code], and the plane has a distance of [code]d[/code] from the "
-"origin."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "Creates a plane from the three points, given in clockwise order."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "Creates a plane from the normal and the plane's distance to the origin."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "Returns the center of the plane."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns the shortest distance from the plane to the position [code]point[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns the center of the plane.\n"
-"This method is deprecated, please use [method center] instead."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns [code]true[/code] if [code]point[/code] is inside the plane. "
-"Comparison uses a custom minimum [code]epsilon[/code] threshold."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns the intersection point of the three planes [code]b[/code], [code]c[/"
-"code] and this plane. If no intersection is found, [code]null[/code] is "
-"returned."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns the intersection point of a ray consisting of the position "
-"[code]from[/code] and the direction normal [code]dir[/code] with this plane. "
-"If no intersection is found, [code]null[/code] is returned."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns the intersection point of a segment from position [code]begin[/code] "
-"to position [code]end[/code] with this plane. If no intersection is found, "
-"[code]null[/code] is returned."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns [code]true[/code] if this plane and [code]plane[/code] are "
-"approximately equal, by running [method @GDScript.is_equal_approx] on each "
-"component."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns [code]true[/code] if [code]point[/code] is located above the plane."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "Returns a copy of the plane, normalized."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"Returns the orthogonal projection of [code]point[/code] into a point in the "
-"plane."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"The distance from the origin to the plane, in the direction of [member "
-"normal]. This value is typically non-negative.\n"
-"In the scalar equation of the plane [code]ax + by + cz = d[/code], this is "
-"[code]d[/code], while the [code](a, b, c)[/code] coordinates are represented "
-"by the [member normal] property."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid ""
-"The normal of the plane, which must be normalized.\n"
-"In the scalar equation of the plane [code]ax + by + cz = d[/code], this is "
-"the vector [code](a, b, c)[/code], where [code]d[/code] is the [member d] "
-"property."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "The X component of the plane's [member normal] vector."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "The Y component of the plane's [member normal] vector."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "The Z component of the plane's [member normal] vector."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "A plane that extends in the Y and Z axes (normal vector points +X)."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "A plane that extends in the X and Z axes (normal vector points +Y)."
-msgstr ""
-
-#: doc/classes/Plane.xml
-msgid "A plane that extends in the X and Y axes (normal vector points +Z)."
-msgstr ""
-
-#: doc/classes/PlaneMesh.xml
-msgid "Class representing a planar [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/PlaneMesh.xml
-msgid ""
-"Class representing a planar [PrimitiveMesh]. This flat mesh does not have a "
-"thickness. By default, this mesh is aligned on the X and Z axes; this "
-"default rotation isn't suited for use with billboarded materials. For "
-"billboarded materials, use [QuadMesh] instead.\n"
-"[b]Note:[/b] When using a large textured [PlaneMesh] (e.g. as a floor), you "
-"may stumble upon UV jittering issues depending on the camera angle. To solve "
-"this, increase [member subdivide_depth] and [member subdivide_width] until "
-"you no longer notice UV jittering."
-msgstr ""
-
-#: doc/classes/PlaneMesh.xml
-msgid "Offset from the origin of the generated plane. Useful for particles."
-msgstr ""
-
-#: doc/classes/PlaneMesh.xml
-msgid "Size of the generated plane."
-msgstr ""
-
-#: doc/classes/PlaneMesh.xml
-msgid "Number of subdivision along the Z axis."
-msgstr ""
-
-#: doc/classes/PlaneMesh.xml
-msgid "Number of subdivision along the X axis."
-msgstr ""
-
-#: doc/classes/PlaneShape.xml
-msgid "Infinite plane shape for 3D collisions."
-msgstr ""
-
-#: doc/classes/PlaneShape.xml
-msgid ""
-"An infinite plane shape for 3D collisions. Note that the [Plane]'s normal "
-"matters; anything \"below\" the plane will collide with it. If the "
-"[PlaneShape] is used in a [PhysicsBody], it will cause colliding objects "
-"placed \"below\" it to teleport \"above\" the plane."
-msgstr ""
-
-#: doc/classes/PlaneShape.xml
-msgid "The [Plane] used by the [PlaneShape] for collision."
-msgstr ""
-
-#: doc/classes/PointMesh.xml
-msgid "Mesh with a single Point primitive."
-msgstr ""
-
-#: doc/classes/PointMesh.xml
-msgid ""
-"The PointMesh is made from a single point. Instead of relying on triangles, "
-"points are rendered as a single rectangle on the screen with a constant "
-"size. They are intended to be used with Particle systems, but can be used as "
-"a cheap way to render constant size billboarded sprites (for example in a "
-"point cloud).\n"
-"PointMeshes, must be used with a material that has a point size. Point size "
-"can be accessed in a shader with [code]POINT_SIZE[/code], or in a "
-"[SpatialMaterial] by setting [member SpatialMaterial.flags_use_point_size] "
-"and the variable [member SpatialMaterial.params_point_size].\n"
-"When using PointMeshes, properties that normally alter vertices will be "
-"ignored, including billboard mode, grow, and cull face."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "A 2D polygon."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"A Polygon2D is defined by a set of points. Each point is connected to the "
-"next, with the final point being connected to the first, resulting in a "
-"closed polygon. Polygon2Ds can be filled with color (solid or gradient) or "
-"filled with a given texture.\n"
-"[b]Note:[/b] By default, Godot can only draw up to 4,096 polygon points at a "
-"time. To increase this limit, open the Project Settings and increase [member "
-"ProjectSettings.rendering/limits/buffers/canvas_polygon_buffer_size_kb] and "
-"[member ProjectSettings.rendering/limits/buffers/"
-"canvas_polygon_index_buffer_size_kb]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"Adds a bone with the specified [code]path[/code] and [code]weights[/code]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Removes all bones from this [Polygon2D]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Removes the specified bone from this [Polygon2D]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Returns the number of bones in this [Polygon2D]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Returns the path to the node associated with the specified bone."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Returns the height values of the specified bone."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Sets the path to the node associated with the specified bone."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "Sets the weight values for the specified bone."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"If [code]true[/code], attempts to perform antialiasing for polygon edges by "
-"drawing a thin OpenGL smooth line on the edges.\n"
-"[b]Note:[/b] Due to how it works, built-in antialiasing will not look "
-"correct for translucent polygons and may not work on certain platforms. As a "
-"workaround, install the [url=https://github.com/godot-extended-libraries/"
-"godot-antialiased-line2d]Antialiased Line2D[/url] add-on then create an "
-"AntialiasedPolygon2D node. That node relies on a texture with custom mipmaps "
-"to perform antialiasing."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"The polygon's fill color. If [code]texture[/code] is defined, it will be "
-"multiplied by this color. It will also be the default color for vertices not "
-"set in [code]vertex_colors[/code]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"Added padding applied to the bounding box when using [code]invert[/code]. "
-"Setting this value too small may result in a \"Bad Polygon\" error."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"If [code]true[/code], polygon will be inverted, containing the area outside "
-"the defined points and extending to the [code]invert_border[/code]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "The offset applied to each vertex."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"The polygon's list of vertices. The final point will be connected to the "
-"first.\n"
-"[b]Note:[/b] This returns a copy of the [PoolVector2Array] rather than a "
-"reference."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"The polygon's fill texture. Use [code]uv[/code] to set texture coordinates."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"Amount to offset the polygon's [code]texture[/code]. If [code](0, 0)[/code] "
-"the texture's origin (its top-left corner) will be placed at the polygon's "
-"[code]position[/code]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "The texture's rotation in radians."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid "The texture's rotation in degrees."
-msgstr "Die Rotation (Drehung) der Textur in Grad."
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"Amount to multiply the [code]uv[/code] coordinates when using a "
-"[code]texture[/code]. Larger values make the texture smaller, and vice versa."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"Texture coordinates for each vertex of the polygon. There should be one "
-"[code]uv[/code] per polygon vertex. If there are fewer, undefined vertices "
-"will use [code](0, 0)[/code]."
-msgstr ""
-
-#: doc/classes/Polygon2D.xml
-msgid ""
-"Color for each vertex. Colors are interpolated between vertices, resulting "
-"in smooth gradients. There should be one per polygon vertex. If there are "
-"fewer, undefined vertices will use [code]color[/code]."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml
-#, fuzzy
-msgid "A pooled array of bytes."
-msgstr "Ein gepacktes [Array] aus [Vector2]-Elementen."
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"An array specifically designed to hold bytes. Optimized for memory usage, "
-"does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolByteArray] or "
-"mutating a [PoolByteArray] within an [Array] or [Dictionary], changes will "
-"be lost:\n"
-"[codeblock]\n"
-"var array = [PoolByteArray()]\n"
-"array[0].push_back(123)\n"
-"print(array)  # [[]] (empty PoolByteArray within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolByteArray] property must be [i]reassigned[/i] with "
-"[code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolByteArray()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(123)\n"
-"array[0] = pool_array\n"
-"print(array)  # [[123]] (PoolByteArray with 1 element inside an Array)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolByteArray]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector2Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolByteArray.xml
-#, fuzzy
-msgid "Appends a [PoolByteArray] at the end of this array."
-msgstr "Hängt ein [PackedVector2Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns a new [PoolByteArray] with the data compressed. Set the compression "
-"mode using one of [enum File.CompressionMode]'s constants."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns a new [PoolByteArray] with the data decompressed. Set "
-"[code]buffer_size[/code] to the size of the uncompressed data. Set the "
-"compression mode using one of [enum File.CompressionMode]'s constants."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns a new [PoolByteArray] with the data decompressed. Set the "
-"compression mode using one of [enum File.CompressionMode]'s constants. "
-"[b]This method only accepts gzip and deflate compression modes.[/b]\n"
-"This method is potentially slower than [code]decompress[/code], as it may "
-"have to re-allocate its output buffer multiple times while decompressing, "
-"where as [code]decompress[/code] knows its output buffer size from the "
-"beginning.\n"
-"\n"
-"GZIP has a maximal compression ratio of 1032:1, meaning it's very possible "
-"for a small compressed payload to decompress to a potentially very large "
-"output. To guard against this, you may provide a maximum size this function "
-"is allowed to allocate in bytes via [code]max_output_size[/code]. Passing -1 "
-"will allow for unbounded output. If any positive value is passed, and the "
-"decompression exceeds that amount in bytes, then an error will be returned."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
-#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
-#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
-#: doc/classes/PoolVector3Array.xml
-msgid ""
-"Assigns the given value to all elements in the array. This can typically be "
-"used together with [method resize] to create an array with a given size and "
-"initialized elements."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns a copy of the array's contents as [String]. Fast alternative to "
-"[method get_string_from_utf8] if the content is ASCII-only. Unlike the UTF-8 "
-"function this function maps every byte to a character in the array. "
-"Multibyte sequences will not be interpreted correctly. For parsing user "
-"input always use [method get_string_from_utf8]."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns a copy of the array's contents as [String]. Slower than [method "
-"get_string_from_ascii] but supports UTF-8 encoded data. Use this function if "
-"you are unsure about the source of the data. For user input this function "
-"should always be preferred."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
-#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
-#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
-#: doc/classes/PoolVector3Array.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the array contains the given value.\n"
-"[b]Note:[/b] This is equivalent to using the [code]in[/code] operator."
-msgstr ""
-"Liefert [code]true[/code] wenn die Länge der Zeichenkette [code]0[/code] ist."
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns a hexadecimal representation of this array as a [String].\n"
-"[codeblock]\n"
-"var array = PoolByteArray([11, 46, 255])\n"
-"print(array.hex_encode()) # Prints: 0b2eff\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
-#: doc/classes/PoolRealArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid ""
-"Inserts a new element at a given position in the array. The position must be "
-"valid, or at the end of the array ([code]idx == size()[/code])."
-msgstr ""
-"Fügt ein neues Element an der übergebenen Position ein. Die Position muss "
-"innerhalb des Arrays oder eins dahinter liegen([code]index == size()[/code])."
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolRealArray.xml
-msgid "Appends an element at the end of the array."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
-#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
-#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
-#: doc/classes/PoolVector3Array.xml
-msgid "Removes an element from the array by index."
-msgstr "Entfernt das Element der Arrays dessen Position übergeben wurde."
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolIntArray.xml
-#: doc/classes/PoolRealArray.xml
-#, fuzzy
-msgid ""
-"Sets the size of the array. If the array is grown, reserves elements at the "
-"end of the array. If the array is shrunk, truncates the array to the new "
-"size.\n"
-"[b]Note:[/b] Added elements are not automatically initialized to 0 and will "
-"contain garbage, i.e. indeterminate values."
-msgstr ""
-"Legt die Größe des Arrays fest. Sollte das Array dadurch wachsen, werden "
-"neue Elemente am Ende des Arrays reserviert. Sollte es schrumpfen, werden "
-"Elemente am Ende entsprechend weggeschnitten."
-
-#: doc/classes/PoolByteArray.xml
-msgid "Changes the byte at the given index."
-msgstr ""
-
-#: doc/classes/PoolByteArray.xml doc/classes/PoolColorArray.xml
-#: doc/classes/PoolIntArray.xml doc/classes/PoolRealArray.xml
-#: doc/classes/PoolStringArray.xml doc/classes/PoolVector2Array.xml
-#: doc/classes/PoolVector3Array.xml
-#, fuzzy
-msgid "Sorts the elements of the array in ascending order."
-msgstr "Entfernt das Element der Arrays dessen Position übergeben wurde."
-
-#: doc/classes/PoolByteArray.xml
-msgid ""
-"Returns the slice of the [PoolByteArray] between indices (inclusive) as a "
-"new [PoolByteArray]. Any negative index is considered to be from the end of "
-"the array."
-msgstr ""
-
-#: doc/classes/PoolColorArray.xml
-#, fuzzy
-msgid "A pooled array of [Color]s."
-msgstr "Ein gepacktes [Array] aus [Vector2]-Elementen."
-
-#: doc/classes/PoolColorArray.xml
-msgid ""
-"An array specifically designed to hold [Color]. Optimized for memory usage, "
-"does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolColorArray] or "
-"mutating a [PoolColorArray] within an [Array] or [Dictionary], changes will "
-"be lost:\n"
-"[codeblock]\n"
-"var array = [PoolColorArray()]\n"
-"array[0].push_back(Color(0.1, 0.2, 0.3, 0.4))\n"
-"print(array)  # [[]] (empty PoolColorArray within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolColorArray] property must be [i]reassigned[/i] with "
-"[code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolColorArray()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(Color(0.1, 0.2, 0.3, 0.4))\n"
-"array[0] = pool_array\n"
-"print(array)  # [[(0.1, 0.2, 0.3, 0.4)]] (PoolColorArray with 1 element "
-"inside an Array)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PoolColorArray.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolColorArray]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector2Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolColorArray.xml
-#, fuzzy
-msgid "Appends a [PoolColorArray] at the end of this array."
-msgstr "Hängt ein [PackedVector2Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolColorArray.xml doc/classes/PoolIntArray.xml
-msgid "Appends a value to the array."
-msgstr ""
-
-#: doc/classes/PoolColorArray.xml doc/classes/PoolStringArray.xml
-#: doc/classes/PoolVector2Array.xml doc/classes/PoolVector3Array.xml
-msgid ""
-"Sets the size of the array. If the array is grown, reserves elements at the "
-"end of the array. If the array is shrunk, truncates the array to the new "
-"size."
-msgstr ""
-"Legt die Größe des Arrays fest. Sollte das Array dadurch wachsen, werden "
-"neue Elemente am Ende des Arrays reserviert. Sollte es schrumpfen, werden "
-"Elemente am Ende entsprechend weggeschnitten."
-
-#: doc/classes/PoolColorArray.xml
-msgid "Changes the [Color] at the given index."
-msgstr ""
-
-#: doc/classes/PoolIntArray.xml
-#, fuzzy
-msgid "A pooled array of integers ([int])."
-msgstr "Ein gepacktes [Array] aus [Vector2]-Elementen."
-
-#: doc/classes/PoolIntArray.xml
-msgid ""
-"An array specifically designed to hold integer values ([int]). Optimized for "
-"memory usage, does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolIntArray] or "
-"mutating a [PoolIntArray] within an [Array] or [Dictionary], changes will be "
-"lost:\n"
-"[codeblock]\n"
-"var array = [PoolIntArray()]\n"
-"array[0].push_back(1234)\n"
-"print(array)  # [[]] (empty PoolIntArray within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolIntArray] property must be [i]reassigned[/i] with "
-"[code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolIntArray()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(1234)\n"
-"array[0] = pool_array\n"
-"print(array)  # [[1234]] (PoolIntArray with 1 element inside an Array)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This type is limited to signed 32-bit integers, which means it "
-"can only take values in the interval [code][-2^31, 2^31 - 1][/code], i.e. "
-"[code][-2147483648, 2147483647][/code]. Exceeding those bounds will wrap "
-"around. In comparison, [int] uses signed 64-bit integers which can hold much "
-"larger values."
-msgstr ""
-
-#: doc/classes/PoolIntArray.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolIntArray]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector2Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolIntArray.xml
-#, fuzzy
-msgid "Appends a [PoolIntArray] at the end of this array."
-msgstr "Hängt ein [PackedVector2Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolIntArray.xml
-#, fuzzy
-msgid ""
-"Inserts a new int at a given position in the array. The position must be "
-"valid, or at the end of the array ([code]idx == size()[/code])."
-msgstr ""
-"Fügt ein neues Element an der übergebenen Position ein. Die Position muss "
-"innerhalb des Arrays oder eins dahinter liegen([code]index == size()[/code])."
-
-#: doc/classes/PoolIntArray.xml
-#, fuzzy
-msgid "Changes the int at the given index."
-msgstr "Ändert den [Vector2] am übergeben Index."
-
-#: doc/classes/PoolRealArray.xml
-#, fuzzy
-msgid "A pooled array of real numbers ([float])."
-msgstr "Ein gepacktes [Array] aus [Vector2]-Elementen."
-
-#: doc/classes/PoolRealArray.xml
-msgid ""
-"An array specifically designed to hold floating-point values. Optimized for "
-"memory usage, does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolRealArray] or "
-"mutating a [PoolRealArray] within an [Array] or [Dictionary], changes will "
-"be lost:\n"
-"[codeblock]\n"
-"var array = [PoolRealArray()]\n"
-"array[0].push_back(12.34)\n"
-"print(array)  # [[]] (empty PoolRealArray within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolRealArray] property must be [i]reassigned[/i] with "
-"[code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolRealArray()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(12.34)\n"
-"array[0] = pool_array\n"
-"print(array)  # [[12.34]] (PoolRealArray with 1 element inside an Array)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Unlike primitive [float]s which are 64-bit, numbers stored in "
-"[PoolRealArray] are 32-bit floats. This means values stored in "
-"[PoolRealArray] have lower precision compared to primitive [float]s. If you "
-"need to store 64-bit floats in an array, use a generic [Array] with [float] "
-"elements as these will still be 64-bit. However, using a generic [Array] to "
-"store [float]s will use roughly 6 times more memory compared to a "
-"[PoolRealArray]."
-msgstr ""
-
-#: doc/classes/PoolRealArray.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolRealArray]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector2Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolRealArray.xml
-#, fuzzy
-msgid "Appends a [PoolRealArray] at the end of this array."
-msgstr "Hängt ein [PackedVector2Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolRealArray.xml
-msgid "Changes the float at the given index."
-msgstr ""
-
-#: doc/classes/PoolStringArray.xml
-#, fuzzy
-msgid "A pooled array of [String]s."
-msgstr "Ein gepacktes [Array] aus [Vector2]-Elementen."
-
-#: doc/classes/PoolStringArray.xml
-msgid ""
-"An array specifically designed to hold [String]s. Optimized for memory "
-"usage, does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolStringArray] or "
-"mutating a [PoolStringArray] within an [Array] or [Dictionary], changes will "
-"be lost:\n"
-"[codeblock]\n"
-"var array = [PoolStringArray()]\n"
-"array[0].push_back(\"hello\")\n"
-"print(array)  # [[]] (empty PoolStringArray within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolStringArray] property must be [i]reassigned[/i] "
-"with [code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolStringArray()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(\"hello\")\n"
-"array[0] = pool_array\n"
-"print(array)  # [[hello]] (PoolStringArray with 1 element inside an Array)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PoolStringArray.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolStringArray]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector2Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolStringArray.xml
-#, fuzzy
-msgid "Appends a [PoolStringArray] at the end of this array."
-msgstr "Hängt ein [PackedVector2Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolStringArray.xml
-#, fuzzy
-msgid ""
-"Returns a [String] with each element of the array joined with the given "
-"[code]delimiter[/code]."
-msgstr ""
-"Gibt ein Array aller Zellen mit der angegebenen Kachel [code]index[/code] "
-"zurück."
-
-#: doc/classes/PoolStringArray.xml
-msgid "Appends a string element at end of the array."
-msgstr ""
-
-#: doc/classes/PoolStringArray.xml
-msgid "Changes the [String] at the given index."
-msgstr ""
-
-#: doc/classes/PoolVector2Array.xml
-#, fuzzy
-msgid "A pooled array of [Vector2]s."
-msgstr "Ein gepacktes [Array] aus [Vector2]-Elementen."
-
-#: doc/classes/PoolVector2Array.xml
-msgid ""
-"An array specifically designed to hold [Vector2]. Optimized for memory "
-"usage, does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolVector2Array] or "
-"mutating a [PoolVector2Array] within an [Array] or [Dictionary], changes "
-"will be lost:\n"
-"[codeblock]\n"
-"var array = [PoolVector2Array()]\n"
-"array[0].push_back(Vector2(12, 34))\n"
-"print(array)  # [[]] (empty PoolVector2Array within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolVector2Array] property must be [i]reassigned[/i] "
-"with [code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolVector2Array()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(Vector2(12, 34))\n"
-"array[0] = pool_array\n"
-"print(array)  # [[(12, 34)]] (PoolVector2Array with 1 element inside an "
-"Array)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PoolVector2Array.xml doc/classes/TileMap.xml
-#: doc/classes/TileSet.xml
-msgid "2D Navigation Astar Demo"
-msgstr ""
-
-#: doc/classes/PoolVector2Array.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolVector2Array]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector2Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolVector2Array.xml
-#, fuzzy
-msgid "Appends a [PoolVector2Array] at the end of this array."
-msgstr "Hängt ein [PackedVector2Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolVector2Array.xml
-msgid "Inserts a [Vector2] at the end."
-msgstr "Fügt ein [Vector2] am Ende hinzu."
-
-#: doc/classes/PoolVector2Array.xml
-msgid "Changes the [Vector2] at the given index."
-msgstr "Ändert den [Vector2] am übergeben Index."
-
-#: doc/classes/PoolVector3Array.xml
-#, fuzzy
-msgid "A pooled array of [Vector3]."
-msgstr "Ein gepacktes [Array] aus [Vector3]-Elementen."
-
-#: doc/classes/PoolVector3Array.xml
-msgid ""
-"An array specifically designed to hold [Vector3]. Optimized for memory "
-"usage, does not fragment the memory.\n"
-"[b]Note:[/b] This type is passed by value and not by reference. This means "
-"that when [i]mutating[/i] a class property of type [PoolVector3Array] or "
-"mutating a [PoolVector3Array] within an [Array] or [Dictionary], changes "
-"will be lost:\n"
-"[codeblock]\n"
-"var array = [PoolVector3Array()]\n"
-"array[0].push_back(Vector3(12, 34, 56))\n"
-"print(array)  # [[]] (empty PoolVector3Array within an Array)\n"
-"[/codeblock]\n"
-"Instead, the entire [PoolVector3Array] property must be [i]reassigned[/i] "
-"with [code]=[/code] for it to be changed:\n"
-"[codeblock]\n"
-"var array = [PoolVector3Array()]\n"
-"var pool_array = array[0]\n"
-"pool_array.push_back(Vector3(12, 34, 56))\n"
-"array[0] = pool_array\n"
-"print(array)  # [[(12, 34, 56)]] (PoolVector3Array with 1 element inside an "
-"Array)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PoolVector3Array.xml
-#, fuzzy
-msgid ""
-"Constructs a new [PoolVector3Array]. Optionally, you can pass in a generic "
-"[Array] that will be converted."
-msgstr ""
-"Erzeugt ein neues [PackedVector3Array]. Optional kann ein gewöhnliches "
-"[Array] übergeben werden das dann konvertiert wird."
-
-#: doc/classes/PoolVector3Array.xml
-#, fuzzy
-msgid "Appends a [PoolVector3Array] at the end of this array."
-msgstr "Hängt ein [PackedVector3Array] am Ende dieses Arrays an."
-
-#: doc/classes/PoolVector3Array.xml
-msgid "Inserts a [Vector3] at the end."
-msgstr "Fügt ein [Vector3] am Ende hinzu."
-
-#: doc/classes/PoolVector3Array.xml
-msgid "Changes the [Vector3] at the given index."
-msgstr "Ändert den [Vector3] am übergeben Index."
-
-#: doc/classes/Popup.xml
-msgid "Base container control for popups and dialogs."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"Popup is a base [Control] used to show dialogs and popups. It's a subwindow "
-"and modal by default (see [Control]) and has helpers for custom popup "
-"behavior. All popup methods ensure correct placement within the viewport."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid "Popup (show the control in modal form)."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"Popup (show the control in modal form) in the center of the screen relative "
-"to its current canvas transform, at the current size, or at a size "
-"determined by [code]size[/code]."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"Popup (show the control in modal form) in the center of the screen relative "
-"to the current canvas transform, clamping the size to [code]size[/code], "
-"then ensuring the popup is no larger than the viewport size multiplied by "
-"[code]fallback_ratio[/code]."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"Popup (show the control in modal form) in the center of the screen relative "
-"to the current canvas transform, ensuring the size is never smaller than "
-"[code]minsize[/code]."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"Popup (show the control in modal form) in the center of the screen relative "
-"to the current canvas transform, scaled at a ratio of size of the screen."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid "Shrink popup to keep to the minimum size of content."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"If [code]true[/code], the popup will not be hidden when a click event occurs "
-"outside of it, or when it receives the [code]ui_cancel[/code] action event.\n"
-"[b]Note:[/b] Enabling this property doesn't affect the Close or Cancel "
-"buttons' behavior in dialogs that inherit from this class. As a workaround, "
-"you can use [method WindowDialog.get_close_button] or [method "
-"ConfirmationDialog.get_cancel] and hide the buttons in question by setting "
-"their [member CanvasItem.visible] property to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid ""
-"Emitted when a popup is about to be shown. This is often used in [PopupMenu] "
-"to clear the list of options then create a new one according to the current "
-"context."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid "Emitted when a popup is hidden."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid "Notification sent right after the popup is shown."
-msgstr ""
-
-#: doc/classes/Popup.xml
-msgid "Notification sent right after the popup is hidden."
-msgstr ""
-
-#: doc/classes/PopupDialog.xml
-msgid "Base class for popup dialogs."
-msgstr ""
-
-#: doc/classes/PopupDialog.xml
-msgid ""
-"PopupDialog is a base class for popup dialogs, along with [WindowDialog]."
-msgstr ""
-
-#: doc/classes/PopupDialog.xml
-msgid "Sets a custom [StyleBox] for the panel of the [PopupDialog]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "PopupMenu displays a list of options."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"[PopupMenu] is a [Control] that displays a list of options. They are popular "
-"in toolbars or context menus.\n"
-"[b]Incremental search:[/b] Like [ItemList] and [Tree], [PopupMenu] supports "
-"searching within the list while the control is focused. Press a key that "
-"matches the first letter of an item's name to select the first item starting "
-"with the given letter. After that point, there are two ways to perform "
-"incremental search: 1) Press the same key again before the timeout duration "
-"to select the next item starting with the same letter. 2) Press letter keys "
-"that match the rest of the word before the timeout duration to match to "
-"select the item in question directly. Both of these actions will be reset to "
-"the beginning of the list if the timeout duration has passed since the last "
-"keystroke was registered. You can adjust the timeout duration by changing "
-"[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new checkable item with text [code]label[/code].\n"
-"An [code]id[/code] can optionally be provided, as well as an accelerator "
-"([code]accel[/code]). If no [code]id[/code] is provided, one will be created "
-"from the index. If no [code]accel[/code] is provided then the default "
-"[code]0[/code] will be assigned to it. See [method get_item_accelerator] for "
-"more info on accelerators.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually. See "
-"[method set_item_checked] for more info on how to control it."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new checkable item and assigns the specified [ShortCut] to it. Sets "
-"the label of the checkbox to the [ShortCut]'s name.\n"
-"An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
-"provided, one will be created from the index.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually. See "
-"[method set_item_checked] for more info on how to control it."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new checkable item with text [code]label[/code] and icon "
-"[code]texture[/code].\n"
-"An [code]id[/code] can optionally be provided, as well as an accelerator "
-"([code]accel[/code]). If no [code]id[/code] is provided, one will be created "
-"from the index. If no [code]accel[/code] is provided then the default "
-"[code]0[/code] will be assigned to it. See [method get_item_accelerator] for "
-"more info on accelerators.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually. See "
-"[method set_item_checked] for more info on how to control it."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new checkable item and assigns the specified [ShortCut] and icon "
-"[code]texture[/code] to it. Sets the label of the checkbox to the "
-"[ShortCut]'s name.\n"
-"An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
-"provided, one will be created from the index.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually. See "
-"[method set_item_checked] for more info on how to control it."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new item with text [code]label[/code] and icon [code]texture[/code].\n"
-"An [code]id[/code] can optionally be provided, as well as an accelerator "
-"([code]accel[/code]). If no [code]id[/code] is provided, one will be created "
-"from the index. If no [code]accel[/code] is provided then the default "
-"[code]0[/code] will be assigned to it. See [method get_item_accelerator] for "
-"more info on accelerators."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Same as [method add_icon_check_item], but uses a radio check button."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Same as [method add_icon_check_shortcut], but uses a radio check button."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new item and assigns the specified [ShortCut] and icon [code]texture[/"
-"code] to it. Sets the label of the checkbox to the [ShortCut]'s name.\n"
-"An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
-"provided, one will be created from the index."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new item with text [code]label[/code].\n"
-"An [code]id[/code] can optionally be provided, as well as an accelerator "
-"([code]accel[/code]). If no [code]id[/code] is provided, one will be created "
-"from the index. If no [code]accel[/code] is provided then the default "
-"[code]0[/code] will be assigned to it. See [method get_item_accelerator] for "
-"more info on accelerators."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new multistate item with text [code]label[/code].\n"
-"Contrarily to normal binary items, multistate items can have more than two "
-"states, as defined by [code]max_states[/code]. Each press or activate of the "
-"item will increase the state by one. The default value is defined by "
-"[code]default_state[/code].\n"
-"An [code]id[/code] can optionally be provided, as well as an accelerator "
-"([code]accel[/code]). If no [code]id[/code] is provided, one will be created "
-"from the index. If no [code]accel[/code] is provided then the default "
-"[code]0[/code] will be assigned to it. See [method get_item_accelerator] for "
-"more info on accelerators."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new radio check button with text [code]label[/code].\n"
-"An [code]id[/code] can optionally be provided, as well as an accelerator "
-"([code]accel[/code]). If no [code]id[/code] is provided, one will be created "
-"from the index. If no [code]accel[/code] is provided then the default "
-"[code]0[/code] will be assigned to it. See [method get_item_accelerator] for "
-"more info on accelerators.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually. See "
-"[method set_item_checked] for more info on how to control it."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a new radio check button and assigns a [ShortCut] to it. Sets the label "
-"of the checkbox to the [ShortCut]'s name.\n"
-"An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
-"provided, one will be created from the index.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually. See "
-"[method set_item_checked] for more info on how to control it."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a separator between items. Separators also occupy an index, which you "
-"can set by using the [code]id[/code] parameter.\n"
-"A [code]label[/code] can optionally be provided, which will appear at the "
-"center of the separator."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds a [ShortCut].\n"
-"An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
-"provided, one will be created from the index."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Adds an item that will act as a submenu of the parent [PopupMenu] node when "
-"clicked. The [code]submenu[/code] argument is the name of the child "
-"[PopupMenu] node that will be shown when the item is clicked.\n"
-"An [code]id[/code] can optionally be provided. If no [code]id[/code] is "
-"provided, one will be created from the index."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Removes all items from the [PopupMenu]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid ""
-"Returns the index of the currently focused item. Returns [code]-1[/code] if "
-"no item is focused."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns the accelerator of the item at index [code]idx[/code]. Accelerators "
-"are special combinations of keys that activate the item, no matter which "
-"control is focused."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Returns the number of items in the [PopupMenu]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns the id of the item at index [code]idx[/code]. [code]id[/code] can be "
-"manually assigned, while index can not."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns the index of the item containing the specified [code]id[/code]. "
-"Index is automatically assigned to each item by the engine. Index can not be "
-"set manually."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns the metadata of the specified item, which might be of any type. You "
-"can set it with [method set_item_metadata], which provides a simple way of "
-"assigning context data to items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns the [ShortCut] associated with the specified [code]idx[/code] item."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns the submenu name of the item at index [code]idx[/code]. See [method "
-"add_submenu_item] for more info on how to add a submenu."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid ""
-"Returns the tooltip associated with the specified index [code]idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the popup will be hidden when the window loses "
-"focus or not."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Übergang zwischen den übergebenen "
-"Nodes existiert."
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns [code]true[/code] if the item at index [code]idx[/code] is checkable "
-"in some way, i.e. if it has a checkbox or radio button.\n"
-"[b]Note:[/b] Checkable items just display a checkmark or radio button, but "
-"don't have any built-in checking behavior and must be checked/unchecked "
-"manually."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns [code]true[/code] if the item at index [code]idx[/code] is checked."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns [code]true[/code] if the item at index [code]idx[/code] is disabled. "
-"When it is disabled it can't be selected, or its action invoked.\n"
-"See [method set_item_disabled] for more info on how to disable an item."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns [code]true[/code] if the item at index [code]idx[/code] has radio "
-"button-style checkability.\n"
-"[b]Note:[/b] This is purely cosmetic; you must add the logic for checking/"
-"unchecking items in radio groups."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Returns [code]true[/code] if the item is a separator. If it is, it will be "
-"displayed as a line. See [method add_separator] for more info on how to add "
-"a separator."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Returns [code]true[/code] if the specified item's shortcut is disabled."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Removes the item at index [code]idx[/code] from the menu.\n"
-"[b]Note:[/b] The indices of items after the removed item will be shifted by "
-"one."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid ""
-"Sets the currently focused item as the given [code]index[/code].\n"
-"Passing [code]-1[/code] as the index makes so that no item is focused."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/PopupMenu.xml
-msgid "Hides the [PopupMenu] when the window loses focus."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the accelerator of the item at index [code]idx[/code]. Accelerators are "
-"special combinations of keys that activate the item, no matter which control "
-"is focused."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets whether the item at index [code]idx[/code] has a checkbox. If "
-"[code]false[/code], sets the type of the item to plain text.\n"
-"[b]Note:[/b] Checkable items just display a checkmark, but don't have any "
-"built-in checking behavior and must be checked/unchecked manually."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the type of the item at the specified index [code]idx[/code] to radio "
-"button. If [code]false[/code], sets the type of the item to plain text."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Mark the item at index [code]idx[/code] as a separator, which means that it "
-"would be displayed as a line. If [code]false[/code], sets the type of the "
-"item to plain text."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Sets the checkstate status of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Enables/disables the item at index [code]idx[/code]. When it is disabled, it "
-"can't be selected and its action can't be invoked."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid "Replaces the [Texture] icon of the specified [code]idx[/code]."
-msgstr "Gibt das Unternodemit dem angegebenen [code]Namen[/code] zurück."
-
-#: doc/classes/PopupMenu.xml
-msgid "Sets the [code]id[/code] of the item at index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the metadata of an item, which may be of any type. You can later get it "
-"with [method get_item_metadata], which provides a simple way of assigning "
-"context data to items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the state of a multistate item. See [method add_multistate_item] for "
-"details."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Sets a [ShortCut] for the specified item [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Disables the [ShortCut] of the specified index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the submenu of the item at index [code]idx[/code]. The submenu is the "
-"name of a child [PopupMenu] node that would be shown when the item is "
-"clicked."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the [String] tooltip of the item at the specified index [code]idx[/"
-"code]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Toggles the check state of the item of the specified index [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Cycle to the next state of a multistate item. See [method "
-"add_multistate_item] for details."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid "If [code]true[/code], allows navigating [PopupMenu] with letter keys."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"If [code]true[/code], hides the [PopupMenu] when a checkbox or radio button "
-"is selected."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "If [code]true[/code], hides the [PopupMenu] when an item is selected."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"If [code]true[/code], hides the [PopupMenu] when a state item is selected."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Sets the delay time in seconds for the submenu item to popup on mouse "
-"hovering. If the popup menu is added as a child of another (acting as a "
-"submenu), it will inherit the delay time of the parent menu item."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Emitted when user navigated to an item of some [code]id[/code] using "
-"[code]ui_up[/code] or [code]ui_down[/code] action."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Emitted when an item of some [code]id[/code] is pressed or its accelerator "
-"is activated."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"Emitted when an item of some [code]index[/code] is pressed or its "
-"accelerator is activated."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "The default text [Color] for menu items' names."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"The text [Color] used for shortcuts and accelerators that show next to the "
-"menu item name when defined. See [method get_item_accelerator] for more info "
-"on accelerators."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Color] used for disabled menu items' text."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Color] used for the hovered text."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Color] used for labeled separators' text. See [method add_separator]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"The horizontal space between the item's name and the shortcut text/submenu "
-"arrow."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "The vertical space between each menu item."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Font] used for the menu items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-#, fuzzy
-msgid "[Font] used for the labeled separator."
-msgstr "Kein Hinweis auf die bearbeitete Eigenschaft."
-
-#: doc/classes/PopupMenu.xml
-msgid "[Texture] icon for the checked checkbox items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Texture] icon for the checked radio button items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Texture] icon for the unchecked radio button items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Texture] icon for the submenu arrow."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[Texture] icon for the unchecked checkbox items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[StyleBox] displayed when the [PopupMenu] item is hovered."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"[StyleBox] for the left side of labeled separator. See [method "
-"add_separator]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid ""
-"[StyleBox] for the right side of labeled separator. See [method "
-"add_separator]."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "Default [StyleBox] of the [PopupMenu] items."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[StyleBox] used when the [PopupMenu] item is disabled."
-msgstr ""
-
-#: doc/classes/PopupMenu.xml
-msgid "[StyleBox] used for the separators. See [method add_separator]."
-msgstr ""
-
-#: doc/classes/PopupPanel.xml
-msgid "Class for displaying popups with a panel background."
-msgstr ""
-
-#: doc/classes/PopupPanel.xml
-msgid ""
-"Class for displaying popups with a panel background. In some cases it might "
-"be simpler to use than [Popup], since it provides a configurable background. "
-"If you are making windows, better check [WindowDialog].\n"
-"If any [Control] node is added as a child of this [PopupPanel], it will be "
-"stretched to fit the panel's size (similar to how [PanelContainer] works)."
-msgstr ""
-
-#: doc/classes/PopupPanel.xml
-msgid "The background panel style of this [PopupPanel]."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid "Portal nodes are used to enable visibility between [Room]s."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"[Portal]s are a special type of [MeshInstance] that allow the portal culling "
-"system to 'see' from one room to the next. They often correspond to doors "
-"and windows in level geometry. By only allowing [Camera]s to see through "
-"portals, this allows the system to cull out all the objects in rooms that "
-"cannot be seen through portals. This is a form of [b]occlusion culling[/b], "
-"and can greatly increase performance.\n"
-"There are some limitations to the form of portals:\n"
-"They must be single sided convex polygons, and usually you would orientate "
-"their front faces [b]outward[/b] from the [Room] they are placed in. The "
-"vertices should be positioned on a single plane (although their positioning "
-"does not have to be perfect).\n"
-"There is no need to place an opposite portal in an adjacent room, links are "
-"made two-way automatically."
-msgstr ""
-
-#: doc/classes/Portal.xml doc/classes/Room.xml
-msgid "Sets individual points. Primarily for use by the editor."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"This is a shortcut for setting the linked [Room] in the name of the [Portal] "
-"(the name is used during conversion)."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"The points defining the shape of the [Portal] polygon (which should be "
-"convex).\n"
-"These are defined in 2D, with [code]0,0[/code] being the origin of the "
-"[Portal] node's [member Spatial.global_transform].\n"
-"[b]Note:[/b] These raw points are sanitized for winding order internally."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"Visibility through [Portal]s can be turned on and off at runtime - this is "
-"useful for having closable doors."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"Some objects are so big that they may be present in more than one [Room] "
-"('sprawling'). As we often don't want objects that *just* breach the edges "
-"to be assigned to neighbouring rooms, you can assign an extra margin through "
-"the [Portal] to allow objects to breach without sprawling."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"Portals default to being two way - see through in both directions, however "
-"you can make them one way, visible from the source room only."
-msgstr ""
-
-#: doc/classes/Portal.xml
-msgid ""
-"In most cases you will want to use the default [Portal] margin in your "
-"portals (this is set in the [RoomManager]).\n"
-"If you want to override this default, set this value to [code]false[/code], "
-"and the local [member portal_margin] will take effect."
-msgstr ""
-
-#: doc/classes/Position2D.xml
-msgid "Generic 2D position hint for editing."
-msgstr ""
-
-#: doc/classes/Position2D.xml
-msgid ""
-"Generic 2D position hint for editing. It's just like a plain [Node2D], but "
-"it displays as a cross in the 2D editor at all times. You can set cross' "
-"visual size by using the gizmo in the 2D editor while the node is selected."
-msgstr ""
-
-#: doc/classes/Position3D.xml
-msgid "Generic 3D position hint for editing."
-msgstr ""
-
-#: doc/classes/Position3D.xml
-msgid ""
-"Generic 3D position hint for editing. It's just like a plain [Spatial], but "
-"it displays as a cross in the 3D editor at all times."
-msgstr ""
-
-#: doc/classes/PrimitiveMesh.xml
-msgid ""
-"Base class for all primitive meshes. Handles applying a [Material] to a "
-"primitive mesh."
-msgstr ""
-
-#: doc/classes/PrimitiveMesh.xml
-msgid ""
-"Base class for all primitive meshes. Handles applying a [Material] to a "
-"primitive mesh. Examples include [CapsuleMesh], [CubeMesh], [CylinderMesh], "
-"[PlaneMesh], [PrismMesh], [QuadMesh], and [SphereMesh]."
-msgstr ""
-
-#: doc/classes/PrimitiveMesh.xml
-msgid ""
-"Returns mesh arrays used to constitute surface of [Mesh]. The result can be "
-"passed to [method ArrayMesh.add_surface_from_arrays] to create a new "
-"surface. For example:\n"
-"[codeblock]\n"
-"var c := CylinderMesh.new()\n"
-"var arr_mesh := ArrayMesh.new()\n"
-"arr_mesh.add_surface_from_arrays(Mesh.PRIMITIVE_TRIANGLES, c."
-"get_mesh_arrays())\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PrimitiveMesh.xml
-msgid ""
-"If set, the order of the vertices in each triangle are reversed resulting in "
-"the backside of the mesh being drawn.\n"
-"This gives the same result as using [constant SpatialMaterial.CULL_BACK] in "
-"[member SpatialMaterial.params_cull_mode]."
-msgstr ""
-
-#: doc/classes/PrimitiveMesh.xml
-msgid "The current [Material] of the primitive mesh."
-msgstr ""
-
-#: doc/classes/PrismMesh.xml
-msgid "Class representing a prism-shaped [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/PrismMesh.xml
-msgid ""
-"Displacement of the upper edge along the X axis. 0.0 positions edge straight "
-"above the bottom-left edge."
-msgstr ""
-
-#: doc/classes/PrismMesh.xml
-msgid "Size of the prism."
-msgstr ""
-
-#: doc/classes/PrismMesh.xml
-msgid "Number of added edge loops along the Z axis."
-msgstr ""
-
-#: doc/classes/PrismMesh.xml
-msgid "Number of added edge loops along the Y axis."
-msgstr ""
-
-#: doc/classes/PrismMesh.xml
-msgid "Number of added edge loops along the X axis."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid ""
-"Type of [Sky] that is generated procedurally based on user input parameters."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid ""
-"ProceduralSky provides a way to create an effective background quickly by "
-"defining procedural parameters for the sun, the sky and the ground. The sky "
-"and ground are very similar, they are defined by a color at the horizon, "
-"another color, and finally an easing curve to interpolate between these two "
-"colors. Similarly, the sun is described by a position in the sky, a color, "
-"and an easing curve. However, the sun also defines a minimum and maximum "
-"angle, these two values define at what distance the easing curve begins and "
-"ends from the sun, and thus end up defining the size of the sun in the sky.\n"
-"The ProceduralSky is updated on the CPU after the parameters change. It is "
-"stored in a texture and then displayed as a background in the scene. This "
-"makes it relatively unsuitable for real-time updates during gameplay. "
-"However, with a small enough texture size, it can still be updated "
-"relatively frequently, as it is updated on a background thread when multi-"
-"threading is available."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Color of the ground at the bottom."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid ""
-"How quickly the [member ground_horizon_color] fades into the [member "
-"ground_bottom_color]."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Amount of energy contribution from the ground."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Color of the ground at the horizon."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid ""
-"How quickly the [member sky_horizon_color] fades into the [member "
-"sky_top_color]."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Amount of energy contribution from the sky."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Color of the sky at the horizon."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Color of the sky at the top."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Distance from center of sun where it fades out completely."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Distance from sun where it goes from solid to starting to fade."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-#, fuzzy
-msgid "The sun's color."
-msgstr "Biskuit Farbe."
-
-#: doc/classes/ProceduralSky.xml
-msgid ""
-"How quickly the sun fades away between [member sun_angle_min] and [member "
-"sun_angle_max]."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Amount of energy contribution from the sun."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "The sun's height using polar coordinates."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-#, fuzzy
-msgid "The direction of the sun using polar coordinates."
-msgstr ""
-"Ein Vektor mit Koordinaten aus Fließkommazahlen genutzt für 2D Berechnungen."
-
-#: doc/classes/ProceduralSky.xml
-msgid ""
-"Size of [Texture] that the ProceduralSky will generate. The size is set "
-"using [enum TextureSize]."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Sky texture will be 256x128."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Sky texture will be 512x256."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Sky texture will be 1024x512. This is the default size."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Sky texture will be 2048x1024."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-msgid "Sky texture will be 4096x2048."
-msgstr ""
-
-#: doc/classes/ProceduralSky.xml
-#, fuzzy
-msgid "Represents the size of the [enum TextureSize] enum."
-msgstr "Steht für die Größe von [enum TextureRepeat] enum."
-
-#: doc/classes/ProgressBar.xml
-msgid "General-purpose progress bar."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid "General-purpose progress bar. Shows fill percentage from right to left."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid "If [code]true[/code], the fill percentage is displayed on the bar."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid "The color of the text."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid "The color of the text's shadow."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid ""
-"Font used to draw the fill percentage if [member percent_visible] is "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid "The style of the background."
-msgstr ""
-
-#: doc/classes/ProgressBar.xml
-msgid "The style of the progress (i.e. the part that fills the bar)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Contains global variables accessible from everywhere."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Contains global variables accessible from everywhere. Use [method "
-"get_setting], [method set_setting] or [method has_setting] to access them. "
-"Variables stored in [code]project.godot[/code] are also loaded into "
-"ProjectSettings, making this object very useful for reading custom game "
-"configuration options.\n"
-"When naming a Project Settings property, use the full path to the setting "
-"including the category. For example, [code]\"application/config/name\"[/"
-"code] for the project name. Category and property names can be viewed in the "
-"Project Settings dialog.\n"
-"[b]Feature tags:[/b] Project settings can be overridden for specific "
-"platforms and configurations (debug, release, ...) using [url=$DOCS_URL/"
-"tutorials/export/feature_tags.html]feature tags[/url].\n"
-"[b]Overriding:[/b] Any project setting can be overridden by creating a file "
-"named [code]override.cfg[/code] in the project's root directory. This can "
-"also be used in exported projects by placing this file in the same directory "
-"as the project binary. Overriding will still take the base project "
-"settings' [url=$DOCS_URL/tutorials/export/feature_tags.html]feature tags[/"
-"url] in account. Therefore, make sure to [i]also[/i] override the setting "
-"with the desired feature tags if you want them to override base project "
-"settings on all platforms and configurations."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Adds a custom property info to a property. The dictionary must contain:\n"
-"- [code]name[/code]: [String] (the property's name)\n"
-"- [code]type[/code]: [int] (see [enum Variant.Type])\n"
-"- optionally [code]hint[/code]: [int] (see [enum PropertyHint]) and "
-"[code]hint_string[/code]: [String]\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"ProjectSettings.set(\"category/property_name\", 0)\n"
-"\n"
-"var property_info = {\n"
-"    \"name\": \"category/property_name\",\n"
-"    \"type\": TYPE_INT,\n"
-"    \"hint\": PROPERTY_HINT_ENUM,\n"
-"    \"hint_string\": \"one,two,three\"\n"
-"}\n"
-"\n"
-"ProjectSettings.add_property_info(property_info)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Clears the whole configuration (not recommended, may break things)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Returns the order of a configuration value (influences when saved to the "
-"config file)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Returns the value of a setting.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"print(ProjectSettings.get_setting(\"application/config/name\"))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Returns the absolute, native OS path corresponding to the localized "
-"[code]path[/code] (starting with [code]res://[/code] or [code]user://[/"
-"code]). The returned path will vary depending on the operating system and "
-"user preferences. See [url=$DOCS_URL/tutorials/io/data_paths.html]File paths "
-"in Godot projects[/url] to see what those paths convert to. See also [method "
-"localize_path].\n"
-"[b]Note:[/b] [method globalize_path] with [code]res://[/code] will not work "
-"in an exported project. Instead, prepend the executable's base directory to "
-"the path when running from an exported project:\n"
-"[codeblock]\n"
-"var path = \"\"\n"
-"if OS.has_feature(\"editor\"):\n"
-"    # Running from an editor binary.\n"
-"    # `path` will contain the absolute path to `hello.txt` located in the "
-"project root.\n"
-"    path = ProjectSettings.globalize_path(\"res://hello.txt\")\n"
-"else:\n"
-"    # Running from an exported project.\n"
-"    # `path` will contain the absolute path to `hello.txt` next to the "
-"executable.\n"
-"    # This is *not* identical to using `ProjectSettings.globalize_path()` "
-"with a `res://` path,\n"
-"    # but is close enough in spirit.\n"
-"    path = OS.get_executable_path().get_base_dir().plus_file(\"hello.txt\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Returns [code]true[/code] if a configuration value is present."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Loads the contents of the .pck or .zip file specified by [code]pack[/code] "
-"into the resource filesystem ([code]res://[/code]). Returns [code]true[/"
-"code] on success.\n"
-"[b]Note:[/b] If a file from [code]pack[/code] shares the same path as a file "
-"already in the resource filesystem, any attempts to load that file will use "
-"the file from [code]pack[/code] unless [code]replace_files[/code] is set to "
-"[code]false[/code].\n"
-"[b]Note:[/b] The optional [code]offset[/code] parameter can be used to "
-"specify the offset in bytes to the start of the resource pack. This is only "
-"supported for .pck files."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Returns the localized path (starting with [code]res://[/code]) corresponding "
-"to the absolute, native OS [code]path[/code]. See also [method "
-"globalize_path]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Returns [code]true[/code] if the specified property exists and its initial "
-"value differs from the current value."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Returns the specified property's initial value. Returns [code]null[/code] if "
-"the property does not exist."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Saves the configuration to the [code]project.godot[/code] file.\n"
-"[b]Note:[/b] This method is intended to be used by editor plugins, as "
-"modified [ProjectSettings] can't be loaded back in the running app. If you "
-"want to change project settings in exported projects, use [method "
-"save_custom] to save [code]override.cfg[/code] file."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Saves the configuration to a custom file. The file extension must be [code]."
-"godot[/code] (to save in text-based [ConfigFile] format) or [code].binary[/"
-"code] (to save in binary format). You can also save [code]override.cfg[/"
-"code] file, which is also text, but can be used in exported projects unlike "
-"other formats."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the specified property's initial value. This is the value the property "
-"reverts to."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the order of a configuration value (influences when saved to the config "
-"file)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the value of a setting.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"ProjectSettings.set_setting(\"application/config/name\", \"Example\")\n"
-"[/codeblock]\n"
-"This can also be used to erase custom project settings. To do this change "
-"the setting value to [code]null[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Comma-separated list of custom Android modules (which must have been built "
-"in the Android export templates) using their Java package path, e.g. "
-"[code]\"org/godotengine/godot/MyCustomSingleton,com/example/foo/"
-"FrenchFriesFactory\"[/code].\n"
-"[b]Note:[/b] Since Godot 3.2.2, the [code]org/godotengine/godot/"
-"GodotPaymentV3[/code] module was deprecated and replaced by the "
-"[code]GodotPayment[/code] plugin which should be enabled in the Android "
-"export preset under [code]Plugins[/code] section. The singleton to access in "
-"code was also renamed to [code]GodotPayment[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Background color for the boot splash."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], scale the boot splash image to the full window size "
-"(preserving the aspect ratio) when the engine starts. If [code]false[/code], "
-"the engine will leave it at the default pixel size."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Path to an image used as the boot splash. If left empty, the default Godot "
-"Engine splash will be displayed instead.\n"
-"[b]Note:[/b] Only effective if [member application/boot_splash/show_image] "
-"is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], displays the image specified in [member application/"
-"boot_splash/image] when the engine starts. If [code]false[/code], only "
-"displays the plain color specified in [member application/boot_splash/"
-"bg_color]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], applies linear filtering when scaling the image "
-"(recommended for high-resolution artwork). If [code]false[/code], uses "
-"nearest-neighbor interpolation (recommended for pixel art)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"This user directory is used for storing persistent data ([code]user://[/"
-"code] filesystem). If left empty, [code]user://[/code] resolves to a project-"
-"specific folder in Godot's own configuration folder (see [method OS."
-"get_user_data_dir]). If a custom directory name is defined, this name will "
-"be used instead and appended to the system-specific user data directory "
-"(same parent folder as the Godot configuration folder documented in [method "
-"OS.get_user_data_dir]).\n"
-"The [member application/config/use_custom_user_dir] setting must be enabled "
-"for this to take effect."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The project's description, displayed as a tooltip in the Project Manager "
-"when hovering the project."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Icon used for the project, set when project loads. Exporters will also use "
-"this icon when possible."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Icon set in [code].icns[/code] format used on macOS to set the game's icon. "
-"This is done automatically on start by calling [method OS.set_native_icon]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The project's name. It is used both by the Project Manager and by exporters. "
-"The project name can be translated by translating its value in localization "
-"files. The window title will be set to match the project name automatically "
-"on startup.\n"
-"[b]Note:[/b] Changing this value will also change the user data folder's "
-"path if [member application/config/use_custom_user_dir] is [code]false[/"
-"code]. After renaming the project, you will no longer be able to access "
-"existing data in [code]user://[/code] unless you rename the old folder to "
-"match the new project name. See [url=$DOCS_URL/tutorials/io/data_paths."
-"html]Data paths[/url] in the documentation for more information."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Specifies a file to override project settings. For example: [code]user://"
-"custom_settings.cfg[/code]. See \"Overriding\" in the [ProjectSettings] "
-"class description at the top for more information.\n"
-"[b]Note:[/b] Regardless of this setting's value, [code]res://override.cfg[/"
-"code] will still be read to override the project settings."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the project will save user data to its own user "
-"directory (see [member application/config/custom_user_dir_name]). This "
-"setting is only effective on desktop platforms. A name must be set in the "
-"[member application/config/custom_user_dir_name] setting for this to take "
-"effect. If [code]false[/code], the project will save user data to [code](OS "
-"user data directory)/Godot/app_userdata/(project name)[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the project will use a hidden directory ([code]."
-"import[/code]) for storing project-specific data (metadata, shader cache, "
-"etc.).\n"
-"If [code]false[/code], a non-hidden directory ([code]import[/code]) will be "
-"used instead.\n"
-"[b]Note:[/b] Restart the application after changing this setting.\n"
-"[b]Note:[/b] Changing this value can help on platforms or with third-party "
-"tools where hidden directory patterns are disallowed. Only modify this "
-"setting if you know that your environment requires it, as changing the "
-"default can impact compatibility with some external tools or plugins which "
-"expect the default [code].import[/code] folder."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Icon set in [code].ico[/code] format used on Windows to set the game's icon. "
-"This is done automatically on start by calling [method OS.set_native_icon]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Time samples for frame deltas are subject to random variation introduced by "
-"the platform, even when frames are displayed at regular intervals thanks to "
-"V-Sync. This can lead to jitter. Delta smoothing can often give a better "
-"result by filtering the input deltas to correct for minor fluctuations from "
-"the refresh rate.\n"
-"[b]Note:[/b] Delta smoothing is only attempted when [member display/window/"
-"vsync/use_vsync] is switched on, as it does not work well without V-Sync.\n"
-"It may take several seconds at a stable frame rate before the smoothing is "
-"initially activated. It will only be active on machines where performance is "
-"adequate to render frames at the refresh rate."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[b]Experimental.[/b] Shifts the measurement of delta time for each frame to "
-"just after the drawing has taken place. This may lead to more consistent "
-"deltas and a reduction in frame stutters."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], disables printing to standard error. If [code]true[/"
-"code], this also hides error and warning messages printed by [method "
-"@GDScript.push_error] and [method @GDScript.push_warning]. See also [member "
-"application/run/disable_stdout].\n"
-"Changes to this setting will only be applied upon restarting the application."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], disables printing to standard output. This is "
-"equivalent to starting the editor or project with the [code]--quiet[/code] "
-"command line argument. See also [member application/run/disable_stderr].\n"
-"Changes to this setting will only be applied upon restarting the application."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], flushes the standard output stream every time a line "
-"is printed. This affects both terminal logging and file logging.\n"
-"When running a project, this setting must be enabled if you want logs to be "
-"collected by service managers such as systemd/journalctl. This setting is "
-"disabled by default on release builds, since flushing on every printed line "
-"will negatively affect performance if lots of lines are printed in a rapid "
-"succession. Also, if this setting is enabled, logged files will still be "
-"written successfully if the application crashes or is otherwise killed by "
-"the user (without being closed \"normally\").\n"
-"[b]Note:[/b] Regardless of this setting, the standard error stream "
-"([code]stderr[/code]) is always flushed when a line is printed to it.\n"
-"Changes to this setting will only be applied upon restarting the application."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Debug build override for [member application/run/flush_stdout_on_print], as "
-"performance is less important during debugging.\n"
-"Changes to this setting will only be applied upon restarting the application."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Forces a delay between frames in the main loop (in milliseconds). This may "
-"be useful if you plan to disable vertical synchronization."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables low-processor usage mode. This setting only "
-"works on desktop platforms. The screen is not redrawn if nothing changes "
-"visually. This is meant for writing applications and editors, but is pretty "
-"useless (and can hurt performance) in most games."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Amount of sleeping between frames when the low-processor usage mode is "
-"enabled (in microseconds). Higher values will result in lower CPU usage."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Path to the main scene file that will be loaded when the project runs."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Audio buses will disable automatically when sound goes below a given dB "
-"threshold for a given time. This saves CPU as effects assigned to that bus "
-"will no longer do any processing."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [AudioBusLayout] resource file to use in the project, unless "
-"overridden by the scene."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Specifies the audio driver to use. This setting is platform-dependent as "
-"each platform supports different audio drivers. If left empty, the default "
-"audio driver will be used."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], microphone input will be allowed. This requires "
-"appropriate permissions to be set when exporting to Android or iOS.\n"
-"[b]Note:[/b] If the operating system blocks access to audio input devices "
-"(due to the user's privacy settings), audio capture will only return "
-"silence. On Windows 10 and later, make sure that apps are allowed to access "
-"the microphone in the OS' privacy settings."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The mixing rate used for audio (in Hz). In general, it's better to not touch "
-"this and leave it to the host operating system."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Safer override for [member audio/mix_rate] in the Web platform. Here "
-"[code]0[/code] means \"let the browser choose\" (since some browsers do not "
-"like forcing the mix rate)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Specifies the preferred output latency in milliseconds for audio. Lower "
-"values will result in lower audio latency at the cost of increased CPU "
-"usage. Low values may result in audible cracking on slower hardware.\n"
-"Audio output latency may be constrained by the host operating system and "
-"audio hardware drivers. If the host can not provide the specified audio "
-"output latency then Godot will attempt to use the nearest latency allowed by "
-"the host. As such you should always use [method AudioServer."
-"get_output_latency] to determine the actual audio output latency.\n"
-"[b]Note:[/b] This setting is ignored on Windows."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Safer override for [member audio/output_latency] in the Web platform, to "
-"avoid audio issues especially on mobile devices."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Setting to hardcode audio delay when playing video. Best to leave this "
-"untouched unless you know what you are doing."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default compression level for gzip. Affects compressed scenes and "
-"resources. Higher levels result in smaller files at the cost of compression "
-"speed. Decompression speed is mostly unaffected by the compression level. "
-"[code]-1[/code] uses the default gzip compression level, which is identical "
-"to [code]6[/code] but could change in the future due to underlying zlib "
-"updates."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default compression level for Zlib. Affects compressed scenes and "
-"resources. Higher levels result in smaller files at the cost of compression "
-"speed. Decompression speed is mostly unaffected by the compression level. "
-"[code]-1[/code] uses the default gzip compression level, which is identical "
-"to [code]6[/code] but could change in the future due to underlying zlib "
-"updates."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default compression level for Zstandard. Affects compressed scenes and "
-"resources. Higher levels result in smaller files at the cost of compression "
-"speed. Decompression speed is mostly unaffected by the compression level."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enables [url=https://github.com/facebook/zstd/releases/tag/v1.3.2]long-"
-"distance matching[/url] in Zstandard."
-msgstr ""
-"Aktiviert [url=https://github.com/facebook/zstd/releases/tag/v1.3.2]long-"
-"distance matching[/url] in Zstandard."
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Largest size limit (in power of 2) allowed when compressing using long-"
-"distance matching with Zstandard. Higher values can result in better "
-"compression, but will require more memory when compressing and decompressing."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], displays getters and setters in autocompletion results "
-"in the script editor. This setting is meant to be used when porting old "
-"projects (Godot 2), as using member variables is the preferred style from "
-"Godot 3 onwards."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when a constant is used as a function."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when deprecated keywords such as "
-"[code]slave[/code] are used."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables specific GDScript warnings (see [code]debug/"
-"gdscript/warnings/*[/code] settings). If [code]false[/code], disables all "
-"GDScript warnings."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], scripts in the [code]res://addons[/code] folder will "
-"not generate warnings."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], enables warnings when the type of the default value "
-"set to an exported variable is different than the specified export type."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when a function is declared with the "
-"same name as a constant."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when a function is declared with the "
-"same name as a variable. This will turn into an error in a future version "
-"when first-class functions become supported in GDScript."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when a function assigned to a "
-"variable may yield and return a function state instead of a value."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when using a function as if it was a "
-"property."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when a ternary operator may emit "
-"values with incompatible types."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when dividing an integer by another "
-"integer (the decimal part will be discarded)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when passing a floating-point value "
-"to a function that expects an integer (it will be converted and lose "
-"precision)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when using a property as if it was a "
-"function."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when calling a function without using "
-"its return value (by assigning it to a variable or using it as a function "
-"argument). Such return values are sometimes used to denote possible errors "
-"using the [enum Error] enum."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when defining a local or subclass "
-"member variable that would shadow a variable at an upper level (such as a "
-"member variable)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when calling an expression that has "
-"no effect on the surrounding code, such as writing [code]2 + 2[/code] as a "
-"statement."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when calling a ternary expression "
-"that has no effect on the surrounding code, such as writing [code]42 if "
-"active else 0[/code] as a statement."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], all warnings will be reported as if they were errors."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when using a variable that wasn't "
-"previously assigned."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when assigning a variable using an "
-"assignment operator like [code]+=[/code] if the variable wasn't previously "
-"assigned."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when unreachable code is detected "
-"(such as after a [code]return[/code] statement that will always be executed)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when using an expression whose type "
-"may not be compatible with the function parameter expected."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "If [code]true[/code], enables warnings when performing an unsafe cast."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when calling a method whose presence "
-"is not guaranteed at compile-time in the class."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when accessing a property whose "
-"presence is not guaranteed at compile-time in the class."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], enables warnings when a function parameter is unused."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/ProjectSettings.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], enables warnings when a member variable is unused."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/ProjectSettings.xml
-msgid "If [code]true[/code], enables warnings when a signal is unused."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "If [code]true[/code], enables warnings when a local variable is unused."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when a variable is declared with the "
-"same name as a function. This will turn into an error in a future version "
-"when first-class functions become supported in GDScript."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings when assigning the result of a "
-"function that returns [code]void[/code] to a variable."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Message to be displayed before the backtrace when the engine crashes. By "
-"default, this message is only used in exported projects due to the editor-"
-"only override applied to this setting."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Editor-only override for [member debug/settings/crash_handler/message]. Does "
-"not affect exported projects in debug or release mode."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum number of frames per second allowed. The actual number of frames per "
-"second may still be below this value if the game is lagging. See also "
-"[member physics/common/physics_fps].\n"
-"If [member display/window/vsync/use_vsync] is enabled, it takes precedence "
-"and the forced FPS number cannot exceed the monitor's refresh rate.\n"
-"This setting is therefore mostly relevant for lowering the maximum FPS below "
-"VSync, e.g. to perform non-real-time rendering of static frames, or test the "
-"project under lag conditions.\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the rendering FPS cap at runtime, set [member Engine.target_fps] instead."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum call stack allowed for debugging GDScript."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables warnings which can help pinpoint where nodes "
-"are being incorrectly updated, which will result in incorrect interpolation "
-"and visual glitches.\n"
-"When a node is being interpolated, it is essential that the transform is set "
-"during [method Node._physics_process] (during a physics tick) rather than "
-"[method Node._process] (during a frame)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum amount of functions per frame allowed when profiling."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Print frames per second to standard output every second."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Print more information to standard output when running. It displays "
-"information such as memory leaks, which scenes and resources are being "
-"loaded, etc."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum call stack in visual scripting, to avoid infinite recursion."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Color of the contact points between collision shapes, visible when \"Visible "
-"Collision Shapes\" is enabled in the Debug menu."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets whether 2D physics will display collision outlines in game when "
-"\"Visible Collision Shapes\" is enabled in the Debug menu."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum number of contact points between collision shapes to display when "
-"\"Visible Collision Shapes\" is enabled in the Debug menu."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Color of the collision shapes, visible when \"Visible Collision Shapes\" is "
-"enabled in the Debug menu."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Color of the disabled navigation geometry, visible when \"Visible "
-"Navigation\" is enabled in the Debug menu."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Color of the navigation geometry, visible when \"Visible Navigation\" is "
-"enabled in the Debug menu."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Custom image for the mouse cursor (limited to 256×256)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Hotspot for the custom mouse cursor image."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Position offset for tooltips, relative to the mouse cursor's hotspot."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], allows HiDPI display on Windows, macOS, and the HTML5 "
-"platform. This setting has no effect on desktop Linux, as DPI-awareness "
-"fallbacks are not supported there."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], keeps the screen on (even in case of inactivity), so "
-"the screensaver does not take over. Works on desktop and mobile platforms."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default screen orientation to use on mobile devices.\n"
-"[b]Note:[/b] When set to a portrait orientation, this project setting does "
-"not flip the project resolution's width and height automatically. Instead, "
-"you have to set [member display/window/size/width] and [member display/"
-"window/size/height] accordingly."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the home indicator is hidden automatically. This only "
-"affects iOS devices without a physical home button."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], allows per-pixel transparency for the window "
-"background. This affects performance, so leave it on [code]false[/code] "
-"unless you need it.\n"
-"See [member OS.window_per_pixel_transparency_enabled] for more details.\n"
-"[b]Note:[/b] This feature is implemented on HTML5, Linux, macOS, Windows, "
-"and Android."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the window background to transparent when it starts.\n"
-"See [member OS.window_per_pixel_transparency_enabled] for more details.\n"
-"[b]Note:[/b] This feature is implemented on HTML5, Linux, macOS, Windows, "
-"and Android."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Forces the main window to be always on top.\n"
-"[b]Note:[/b] This setting is ignored on iOS, Android, and HTML5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Forces the main window to be borderless.\n"
-"[b]Note:[/b] This setting is ignored on iOS, Android, and HTML5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the main window to full screen when the project starts. Note that this "
-"is not [i]exclusive[/i] fullscreen. On Windows and Linux, a borderless "
-"window is used to emulate fullscreen. On macOS, a new desktop is used to "
-"display the running project.\n"
-"Regardless of the platform, enabling fullscreen will change the window size "
-"to match the monitor's size. Therefore, make sure your project supports "
-"[url=$DOCS_URL/tutorials/rendering/multiple_resolutions.html]multiple "
-"resolutions[/url] when enabling fullscreen mode.\n"
-"[b]Note:[/b] This setting is ignored on iOS, Android, and HTML5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the game's main viewport height. On desktop platforms, this is the "
-"default window size. Stretch mode settings also use this as a reference when "
-"enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Allows the window to be resizable by default.\n"
-"[b]Note:[/b] This setting is ignored on iOS."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If greater than zero, overrides the window height when running the game. "
-"Useful for testing stretch modes."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If greater than zero, overrides the window width when running the game. "
-"Useful for testing stretch modes."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the game's main viewport width. On desktop platforms, this is the "
-"default window size. Stretch mode settings also use this as a reference when "
-"enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Specifies the tablet driver to use. If left empty, the default driver will "
-"be used."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables vertical synchronization. This eliminates "
-"tearing that may appear in moving scenes, at the cost of higher input "
-"latency and stuttering at lower framerates. If [code]false[/code], vertical "
-"synchronization will be disabled, however, many platforms will enforce it "
-"regardless (such as mobile platforms and HTML5)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]Use Vsync[/code] is enabled and this setting is [code]true[/code], "
-"enables vertical synchronization via the operating system's window "
-"compositor when in windowed mode and the compositor is enabled. This will "
-"prevent stutter in certain situations. (Windows only.)\n"
-"[b]Note:[/b] This option is experimental and meant to alleviate stutter "
-"experienced by some users. However, some users have experienced a Vsync "
-"framerate halving (e.g. from 60 FPS to 30 FPS) when using it."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The command-line arguments to append to Godot's own command line when "
-"running the project. This doesn't affect the editor itself.\n"
-"It is possible to make another executable run Godot by using the "
-"[code]%command%[/code] placeholder. The placeholder will be replaced with "
-"Godot's own command line. Program-specific arguments should be placed "
-"[i]before[/i] the placeholder, whereas Godot-specific arguments should be "
-"placed [i]after[/i] the placeholder.\n"
-"For example, this can be used to force the project to run on the dedicated "
-"GPU in a NVIDIA Optimus system on Linux:\n"
-"[codeblock]\n"
-"prime-run %command%\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default naming style for scene files to infer from their root nodes. "
-"Possible options are:\n"
-"- [code]0[/code] (Auto): Uses the scene root name as is without changing its "
-"casing.\n"
-"- [code]1[/code] (PascalCase): Converts the scene root name to PascalCase "
-"casing.\n"
-"- [code]2[/code] (snake_case): Converts the scene root name to snake_case "
-"casing."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Search path for project-specific script templates. Godot will search for "
-"script templates both in the editor-specific path and in this project-"
-"specific path."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Text-based file extensions to include in the script editor's \"Find in "
-"Files\" feature. You can add e.g. [code]tscn[/code] if you wish to also "
-"parse your scene files, especially if you use built-in scripts which are "
-"serialized in the scene files."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Load the previously opened VCS plugin when the editor starts up. This is set "
-"to [code]true[/code] whenever a new VCS plugin is initialized."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Last loaded VCS plugin name. Used to autoload the plugin when the editor "
-"starts up."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default value for [member ScrollContainer.scroll_deadzone], which will be "
-"used for all [ScrollContainer]s unless overridden."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If enabled, the moment [member Viewport.gui_disable_input] is set to "
-"[code]false[/code] to disable GUI input in a viewport, current mouse over "
-"and mouse focus will be dropped.\n"
-"That behavior helps to keep a robust GUI state, with no surprises when input "
-"is resumed regardless what has happened in the meantime.\n"
-"If disabled, the legacy behavior is used, which consists in just not doing "
-"anything besides the GUI input disable itself.\n"
-"[b]Note:[/b] This is set to [code]true[/code] by default for new projects "
-"and is the recommended setting."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], swaps OK and Cancel buttons in dialogs on Windows and "
-"UWP to follow interface conventions."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Path to a custom [Theme] resource file to use for the project ([code]theme[/"
-"code] or generic [code]tres[/code]/[code]res[/code] extension)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Path to a custom [Font] resource to use as default for all GUI elements of "
-"the project."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "If [code]true[/code], makes sure the theme used works with HiDPI."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Timer setting for incremental search in [Tree], [ItemList], etc. controls "
-"(in milliseconds)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Timer for detecting idle in [TextEdit] (in seconds)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Default delay for tooltips (in seconds)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to confirm a focused button, menu or list item, "
-"or validate input.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to discard a modal or pending input.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to move down in the UI.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to go to the end position of a [Control] (e.g. "
-"last item in an [ItemList] or a [Tree]), matching the behavior of [constant "
-"KEY_END] on typical desktop UI systems.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to focus the next [Control] in the scene. The "
-"focus behavior can be configured via [member Control.focus_next].\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to focus the previous [Control] in the scene. The "
-"focus behavior can be configured via [member Control.focus_previous].\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to go to the start position of a [Control] (e.g. "
-"first item in an [ItemList] or a [Tree]), matching the behavior of [constant "
-"KEY_HOME] on typical desktop UI systems.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to move left in the UI.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to go down a page in a [Control] (e.g. in an "
-"[ItemList] or a [Tree]), matching the behavior of [constant KEY_PAGEDOWN] on "
-"typical desktop UI systems.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to go up a page in a [Control] (e.g. in an "
-"[ItemList] or a [Tree]), matching the behavior of [constant KEY_PAGEUP] on "
-"typical desktop UI systems.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to move right in the UI.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to select an item in a [Control] (e.g. in an "
-"[ItemList] or a [Tree]).\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default [InputEventAction] to move up in the UI.\n"
-"[b]Note:[/b] Default [code]ui_*[/code] actions cannot be removed as they are "
-"necessary for the internal logic of several [Control]s. The events assigned "
-"to the action can however be modified."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], key/touch/joystick events will be flushed just before "
-"every idle and physics frame.\n"
-"If [code]false[/code], such events will be flushed only once per idle frame, "
-"between iterations of the engine.\n"
-"Enabling this can greatly improve the responsiveness to input, specially in "
-"devices that need to run multiple physics frames per visible (idle) frame, "
-"because they can't run at the target frame rate.\n"
-"[b]Note:[/b] Currently implemented only in Android."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], sends mouse input events when tapping or swiping on "
-"the touchscreen."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], sends touch input events when clicking or dragging the "
-"mouse."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Default delay for touch events. This only affects iOS devices."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 1. If left empty, the layer will "
-"display as \"Layer 1\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 10. If left empty, the layer will "
-"display as \"Layer 10\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 11. If left empty, the layer will "
-"display as \"Layer 11\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 12. If left empty, the layer will "
-"display as \"Layer 12\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 13. If left empty, the layer will "
-"display as \"Layer 13\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 14. If left empty, the layer will "
-"display as \"Layer 14\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 15. If left empty, the layer will "
-"display as \"Layer 15\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 16. If left empty, the layer will "
-"display as \"Layer 16\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 17. If left empty, the layer will "
-"display as \"Layer 17\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 18. If left empty, the layer will "
-"display as \"Layer 18\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 19. If left empty, the layer will "
-"display as \"Layer 19\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 2. If left empty, the layer will "
-"display as \"Layer 2\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 20. If left empty, the layer will "
-"display as \"Layer 20\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 21. If left empty, the layer will "
-"display as \"Layer 21\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 22. If left empty, the layer will "
-"display as \"Layer 22\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 23. If left empty, the layer will "
-"display as \"Layer 23\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 24. If left empty, the layer will "
-"display as \"Layer 24\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 25. If left empty, the layer will "
-"display as \"Layer 25\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 26. If left empty, the layer will "
-"display as \"Layer 26\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 27. If left empty, the layer will "
-"display as \"Layer 27\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 28. If left empty, the layer will "
-"display as \"Layer 28\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 29. If left empty, the layer will "
-"display as \"Layer 29\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 3. If left empty, the layer will "
-"display as \"Layer 3\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 30. If left empty, the layer will "
-"display as \"Layer 30\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 31. If left empty, the layer will "
-"display as \"Layer 31\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 32. If left empty, the layer will "
-"display as \"Layer 32\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 4. If left empty, the layer will "
-"display as \"Layer 4\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 5. If left empty, the layer will "
-"display as \"Layer 5\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 6. If left empty, the layer will "
-"display as \"Layer 6\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 7. If left empty, the layer will "
-"display as \"Layer 7\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 8. If left empty, the layer will "
-"display as \"Layer 8\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 2D navigation layer 9. If left empty, the layer will "
-"display as \"Layer 9\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 1."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 10."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 11."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 12."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 13."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 14."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 15."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 16."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 17."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 18."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 19."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 2."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 20."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 21."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 22."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 23."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 24."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 25."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 26."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 27."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 28."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 29."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 3."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 30."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 31."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 32."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 4."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 6."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 7."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 8."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D physics layer 9."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 1."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 10."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 11."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 12."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 13."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 14."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 15."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 16."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 17."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 18."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 19."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 2."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 20."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 3."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 4."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 6."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 7."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 8."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 2D render layer 9."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 1. If left empty, the layer will "
-"display as \"Layer 1\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 10. If left empty, the layer will "
-"display as \"Layer 10\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 11. If left empty, the layer will "
-"display as \"Layer 11\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 12. If left empty, the layer will "
-"display as \"Layer 12\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 13. If left empty, the layer will "
-"display as \"Layer 13\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 14. If left empty, the layer will "
-"display as \"Layer 14\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 15. If left empty, the layer will "
-"display as \"Layer 15\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 16. If left empty, the layer will "
-"display as \"Layer 16\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 17. If left empty, the layer will "
-"display as \"Layer 17\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 18. If left empty, the layer will "
-"display as \"Layer 18\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 19. If left empty, the layer will "
-"display as \"Layer 19\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 2. If left empty, the layer will "
-"display as \"Layer 2\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 20. If left empty, the layer will "
-"display as \"Layer 20\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 21. If left empty, the layer will "
-"display as \"Layer 21\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 22. If left empty, the layer will "
-"display as \"Layer 22\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 23. If left empty, the layer will "
-"display as \"Layer 23\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 24. If left empty, the layer will "
-"display as \"Layer 24\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 25. If left empty, the layer will "
-"display as \"Layer 25\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 26. If left empty, the layer will "
-"display as \"Layer 26\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 27. If left empty, the layer will "
-"display as \"Layer 27\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 28. If left empty, the layer will "
-"display as \"Layer 28\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 29. If left empty, the layer will "
-"display as \"Layer 29\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 3. If left empty, the layer will "
-"display as \"Layer 3\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 30. If left empty, the layer will "
-"display as \"Layer 30\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 31. If left empty, the layer will "
-"display as \"Layer 31\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 32. If left empty, the layer will "
-"display as \"Layer 32\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 4. If left empty, the layer will "
-"display as \"Layer 4\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 5. If left empty, the layer will "
-"display as \"Layer 5\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 6. If left empty, the layer will "
-"display as \"Layer 6\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 7. If left empty, the layer will "
-"display as \"Layer 7\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 8. If left empty, the layer will "
-"display as \"Layer 8\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Optional name for the 3D navigation layer 9. If left empty, the layer will "
-"display as \"Layer 9\"."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 1."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 10."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 11."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 12."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 13."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 14."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 15."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 16."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 17."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 18."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 19."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 2."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 20."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 21."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 22."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 23."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 24."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 25."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 26."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 27."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 28."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 29."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 3."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 30."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 31."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 32."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 4."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 6."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 7."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 8."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D physics layer 9."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 1."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 10."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 11."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 12."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 13."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 14."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 15."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 16."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 17."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 18."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 19."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 2."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 20."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 3."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 4."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 5."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 6."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 7."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 8."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Optional name for the 3D render layer 9."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The locale to fall back to if a translation isn't available in a given "
-"language. If left empty, [code]en[/code] (English) will be used."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If non-empty, this locale will be used when running the project from the "
-"editor."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "If [code]true[/code], logs all output to files."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Desktop override for [member logging/file_logging/enable_file_logging], as "
-"log files are not readily accessible on mobile/Web platforms."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Path to logs within the project. Using an [code]user://[/code] path is "
-"recommended."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Specifies the maximum amount of log files allowed (used for rotation)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Godot uses a message queue to defer some function calls. If you run out of "
-"space on it (you will see an error), you can increase the size here."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"This is used by servers when used in multi-threading mode (servers and "
-"visual). RIDs are preallocated to avoid stalling the server requesting them "
-"on threads. If servers get stalled too often when loading resources in a "
-"thread, increase this number."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The policy to use for unhandled Mono (C#) exceptions. The default "
-"\"Terminate Application\" exits the project as soon as an unhandled "
-"exception is thrown. \"Log Error\" logs an error message to the console "
-"instead, and will not interrupt the project execution when an unhandled "
-"exception is thrown.\n"
-"[b]Note:[/b] The unhandled exception policy is always set to \"Log Error\" "
-"in the editor, which also includes C# [code]tool[/code] scripts running "
-"within the editor as well as editor plugin code."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default cell height for 2D navigation maps. See [method Navigation2DServer."
-"map_set_cell_height].\n"
-"[b]Note:[/b] Currently not implemented."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default cell size for 2D navigation maps. See [method Navigation2DServer."
-"map_set_cell_size]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default edge connection margin for 2D navigation maps. See [method "
-"Navigation2DServer.map_set_edge_connection_margin]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default cell height for 3D navigation maps. See [method NavigationServer."
-"map_set_cell_height]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default cell size for 3D navigation maps. See [method NavigationServer."
-"map_set_cell_size]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default edge connection margin for 3D navigation maps. See [method "
-"NavigationServer.map_set_edge_connection_margin]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default map up vector for 3D navigation maps. See [method NavigationServer."
-"map_set_up]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum amount of characters allowed to send as output from the debugger. "
-"Over this value, content is dropped. This helps not to stall the debugger "
-"connection."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum number of errors allowed to be sent as output from the debugger. "
-"Over this value, content is dropped. This helps not to stall the debugger "
-"connection."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum amount of messages allowed to send as output from the debugger. Over "
-"this value, content is dropped. This helps not to stall the debugger "
-"connection."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum number of warnings allowed to be sent as output from the debugger. "
-"Over this value, content is dropped. This helps not to stall the debugger "
-"connection."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default size of packet peer stream for deserializing Godot data (in bytes, "
-"specified as a power of two). The default value [code]16[/code] is equal to "
-"65,536 bytes. Over this size, data is dropped."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Timeout (in seconds) for connection attempts using TCP."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum size (in kiB) for the [WebRTCDataChannel] input buffer."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum size (in kiB) for the [WebSocketClient] input buffer."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum number of concurrent input packets for [WebSocketClient]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum size (in kiB) for the [WebSocketClient] output buffer."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum number of concurrent output packets for [WebSocketClient]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum size (in kiB) for the [WebSocketServer] input buffer."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum number of concurrent input packets for [WebSocketServer]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum size (in kiB) for the [WebSocketServer] output buffer."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Maximum number of concurrent output packets for [WebSocketServer]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Amount of read ahead used by remote filesystem. Higher values decrease the "
-"effects of latency at the cost of higher bandwidth usage."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Page size used by remote filesystem (in bytes)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The CA certificates bundle to use for SSL connections. If this is set to a "
-"non-empty value, this will [i]override[/i] Godot's default [url=https://"
-"github.com/godotengine/godot/blob/master/thirdparty/certs/ca-certificates."
-"crt]Mozilla certificate bundle[/url]. If left empty, the default certificate "
-"bundle will be used.\n"
-"If in doubt, leave this setting empty."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"When creating node names automatically, set the type of casing in this "
-"project. This is mostly an editor setting."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"What to use to separate node name from number. This is mostly an editor "
-"setting."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Size of the hash table used for the broad-phase 2D hash grid algorithm.\n"
-"[b]Note:[/b] Not used if [member ProjectSettings.physics/2d/use_bvh] is "
-"enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Additional expansion applied to object bounds in the 2D physics bounding "
-"volume hierarchy. This can reduce BVH processing at the cost of a slightly "
-"coarser broadphase, which can stress the physics more in some situations.\n"
-"The default value will work well in most situations. A value of 0.0 will "
-"turn this optimization off, and larger values may work better for larger, "
-"faster moving objects.\n"
-"[b]Note:[/b] Used only if [member ProjectSettings.physics/2d/use_bvh] is "
-"enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Cell size used for the broad-phase 2D hash grid algorithm (in pixels).\n"
-"[b]Note:[/b] Not used if [member ProjectSettings.physics/2d/use_bvh] is "
-"enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default angular damp in 2D.\n"
-"[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. "
-"At value [code]0[/code] objects will keep moving with the same velocity. "
-"Values greater than [code]1[/code] will aim to reduce the velocity to "
-"[code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim "
-"to reduce the velocity to [code]0[/code] in half a second. A value equal to "
-"or greater than the physics frame rate ([member ProjectSettings.physics/"
-"common/physics_fps], [code]60[/code] by default) will bring the object to a "
-"stop in one iteration."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default gravity strength in 2D (in pixels per second squared).\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the default gravity at runtime, use the following code sample:\n"
-"[codeblock]\n"
-"# Set the default gravity strength to 98.\n"
-"Physics2DServer.area_set_param(get_viewport().find_world_2d().get_space(), "
-"Physics2DServer.AREA_PARAM_GRAVITY, 98)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default gravity direction in 2D.\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the default gravity vector at runtime, use the following code sample:\n"
-"[codeblock]\n"
-"# Set the default gravity direction to `Vector2(0, 1)`.\n"
-"Physics2DServer.area_set_param(get_viewport().find_world_2d().get_space(), "
-"Physics2DServer.AREA_PARAM_GRAVITY_VECTOR, Vector2(0, 1))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default linear damp in 2D.\n"
-"[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. "
-"At value [code]0[/code] objects will keep moving with the same velocity. "
-"Values greater than [code]1[/code] will aim to reduce the velocity to "
-"[code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim "
-"to reduce the velocity to [code]0[/code] in half a second. A value equal to "
-"or greater than the physics frame rate ([member ProjectSettings.physics/"
-"common/physics_fps], [code]60[/code] by default) will bring the object to a "
-"stop in one iteration."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Threshold defining the surface size that constitutes a large object with "
-"regard to cells in the broad-phase 2D hash grid algorithm.\n"
-"[b]Note:[/b] Not used if [member ProjectSettings.physics/2d/use_bvh] is "
-"enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets which physics engine to use for 2D physics.\n"
-"\"DEFAULT\" and \"GodotPhysics\" are the same, as there is currently no "
-"alternative 2D physics server implemented."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Threshold angular velocity under which a 2D physics body will be considered "
-"inactive. See [constant Physics2DServer."
-"SPACE_PARAM_BODY_ANGULAR_VELOCITY_SLEEP_THRESHOLD]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Threshold linear velocity under which a 2D physics body will be considered "
-"inactive. See [constant Physics2DServer."
-"SPACE_PARAM_BODY_LINEAR_VELOCITY_SLEEP_THRESHOLD]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets whether physics is run on the main thread or a separate one. Running "
-"the server on a thread increases performance, but restricts API access to "
-"only physics process.\n"
-"[b]Warning:[/b] As of Godot 3.2, there are mixed reports about the use of a "
-"Multi-Threaded thread model for physics. Be sure to assess whether it does "
-"give you extra performance and no regressions when using it."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Time (in seconds) of inactivity before which a 2D physics body will put to "
-"sleep. See [constant Physics2DServer.SPACE_PARAM_BODY_TIME_TO_SLEEP]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enables the use of bounding volume hierarchy instead of hash grid for 2D "
-"physics spatial partitioning. This may give better performance."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets whether the 3D physics world will be created with support for "
-"[SoftBody] physics. Only applies to the Bullet physics engine."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default angular damp in 3D.\n"
-"[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. "
-"At value [code]0[/code] objects will keep moving with the same velocity. "
-"Values greater than [code]1[/code] will aim to reduce the velocity to "
-"[code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim "
-"to reduce the velocity to [code]0[/code] in half a second. A value equal to "
-"or greater than the physics frame rate ([member ProjectSettings.physics/"
-"common/physics_fps], [code]60[/code] by default) will bring the object to a "
-"stop in one iteration."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default gravity strength in 3D (in meters per second squared).\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the default gravity at runtime, use the following code sample:\n"
-"[codeblock]\n"
-"# Set the default gravity strength to 9.8.\n"
-"PhysicsServer.area_set_param(get_viewport().find_world().get_space(), "
-"PhysicsServer.AREA_PARAM_GRAVITY, 9.8)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default gravity direction in 3D.\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the default gravity vector at runtime, use the following code sample:\n"
-"[codeblock]\n"
-"# Set the default gravity direction to `Vector3(0, -1, 0)`.\n"
-"PhysicsServer.area_set_param(get_viewport().find_world().get_space(), "
-"PhysicsServer.AREA_PARAM_GRAVITY_VECTOR, Vector3(0, -1, 0))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default linear damp in 3D.\n"
-"[b]Note:[/b] Good values are in the range [code]0[/code] to [code]1[/code]. "
-"At value [code]0[/code] objects will keep moving with the same velocity. "
-"Values greater than [code]1[/code] will aim to reduce the velocity to "
-"[code]0[/code] in less than a second e.g. a value of [code]2[/code] will aim "
-"to reduce the velocity to [code]0[/code] in half a second. A value equal to "
-"or greater than the physics frame rate ([member ProjectSettings.physics/"
-"common/physics_fps], [code]60[/code] by default) will bring the object to a "
-"stop in one iteration."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Additional expansion applied to object bounds in the 3D physics bounding "
-"volume hierarchy. This can reduce BVH processing at the cost of a slightly "
-"coarser broadphase, which can stress the physics more in some situations.\n"
-"The default value will work well in most situations. A value of 0.0 will "
-"turn this optimization off, and larger values may work better for larger, "
-"faster moving objects.\n"
-"[b]Note:[/b] Used only if [member ProjectSettings.physics/3d/godot_physics/"
-"use_bvh] is enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enables the use of bounding volume hierarchy instead of octree for 3D "
-"physics spatial partitioning. This may give better performance."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets which physics engine to use for 3D physics.\n"
-"\"DEFAULT\" is currently the [url=https://bulletphysics.org]Bullet[/url] "
-"physics engine. The \"GodotPhysics\" engine is still supported as an "
-"alternative."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], smooths out collision with trimesh shapes "
-"([ConcavePolygonShape]) by telling the Bullet physics engine to generate "
-"internal edge information for every trimesh shape created.\n"
-"[b]Note:[/b] Only effective if [member physics/3d/physics_engine] is set to "
-"[code]DEFAULT[/code] or [code]Bullet[/code], [i]not[/i] [code]GodotPhysics[/"
-"code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Enables [member Viewport.physics_object_picking] on the root viewport."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If enabled, 2D and 3D physics picking behaves this way in relation to "
-"pause:\n"
-"- When pause is started, every collision object that is hovered or captured "
-"(3D only) is released from that condition, getting the relevant mouse-exit "
-"callback, unless its pause mode makes it immune to pause.\n"
-"- During pause, picking only considers collision objects immune to pause, "
-"sending input events and enter/exit callbacks to them as expected.\n"
-"If disabled, the legacy behavior is used, which consists in queuing the "
-"picking input events during pause (so nodes won't get them) and flushing "
-"that queue on resume, against the state of the 2D/3D world at that point."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The number of fixed iterations per second. This controls how often physics "
-"simulation and [method Node._physics_process] methods are run. See also "
-"[member debug/settings/fps/force_fps].\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the physics FPS at runtime, set [member Engine.iterations_per_second] "
-"instead.\n"
-"[b]Note:[/b] Only 8 physics ticks may be simulated per rendered frame at "
-"most. If more than 8 physics ticks have to be simulated per rendered frame "
-"to keep up with rendering, the game will appear to slow down (even if "
-"[code]delta[/code] is used consistently in physics calculations). Therefore, "
-"it is recommended not to increase [member physics/common/physics_fps] above "
-"240. Otherwise, the game will slow down when the rendering framerate goes "
-"below 30 FPS."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the renderer will interpolate the transforms of "
-"physics objects between the last two transforms, such that smooth motion is "
-"seen when physics ticks do not coincide with rendered frames.\n"
-"[b]Note:[/b] When moving objects to new positions (rather than the usual "
-"physics motion) you may want to temporarily turn off interpolation to "
-"prevent a visible glitch. You can do this using the [method Node."
-"reset_physics_interpolation] function."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Controls how much physics ticks are synchronized with real time. For 0 or "
-"less, the ticks are synchronized. Such values are recommended for network "
-"games, where clock synchronization matters. Higher values cause higher "
-"deviation of in-game clock and real clock, but allows smoothing out "
-"framerate jitters. The default value of 0.5 should be fine for most; values "
-"above 2 could cause the game to react to dropped frames with a noticeable "
-"delay and are not recommended.\n"
-"[b]Note:[/b] For best results, when using a custom physics interpolation "
-"solution, the physics jitter fix should be disabled by setting [member "
-"physics/common/physics_jitter_fix] to [code]0[/code].\n"
-"[b]Note:[/b] Jitter fix is automatically disabled at runtime when [member "
-"physics/common/physics_interpolation] is enabled.\n"
-"[b]Note:[/b] This property is only read when the project starts. To change "
-"the value at runtime, set [member Engine.physics_jitter_fix] instead."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[b]Experimental.[/b] Calls [code]glBufferData[/code] with NULL data prior to "
-"uploading batching data. This may not be necessary but can be used for "
-"safety.\n"
-"[b]Note:[/b] Use with care. You are advised to leave this as default for "
-"exports. A non-default setting that works better on your machine may "
-"adversely affect performance for end users."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[b]Experimental.[/b] If set to on, uses the [code]GL_STREAM_DRAW[/code] flag "
-"for batching buffer uploads. If off, uses the [code]GL_DYNAMIC_DRAW[/code] "
-"flag.\n"
-"[b]Note:[/b] Use with care. You are advised to leave this as default for "
-"exports. A non-default setting that works better on your machine may "
-"adversely affect performance for end users."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[b]Experimental.[/b] If set to on, this applies buffer orphaning - "
-"[code]glBufferData[/code] is called with NULL data and the full buffer size "
-"prior to uploading new data. This can be important to avoid stalling on some "
-"hardware.\n"
-"[b]Note:[/b] Use with care. You are advised to leave this as default for "
-"exports. A non-default setting that works better on your machine may "
-"adversely affect performance for end users."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[b]Experimental.[/b] If set to on, uses the [code]GL_STREAM_DRAW[/code] flag "
-"for legacy buffer uploads. If off, uses the [code]GL_DYNAMIC_DRAW[/code] "
-"flag.\n"
-"[b]Note:[/b] Use with care. You are advised to leave this as default for "
-"exports. A non-default setting that works better on your machine may "
-"adversely affect performance for end users."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Choose between fixed mode where corner scalings are preserved matching the "
-"artwork, and scaling mode.\n"
-"Not available in GLES3 when [member rendering/batching/options/use_batching] "
-"is off."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Some NVIDIA GPU drivers have a bug which produces flickering issues for the "
-"[code]draw_rect[/code] method, especially as used in [TileMap]. Refer to "
-"[url=https://github.com/godotengine/godot/issues/9913]GitHub issue 9913[/"
-"url] for details.\n"
-"If [code]true[/code], this option enables a \"safe\" code path for such "
-"NVIDIA GPUs at the cost of performance. This option affects GLES2 and GLES3 "
-"rendering, but only on desktop platforms."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], performs 2D skinning on the CPU rather than the GPU. "
-"This provides greater compatibility with a wide range of hardware, and also "
-"may be faster in some circumstances.\n"
-"Currently only available when [member rendering/batching/options/"
-"use_batching] is active.\n"
-"[b]Note:[/b] Antialiased software skinned polys are not supported, and will "
-"be rendered without antialiasing.\n"
-"[b]Note:[/b] Custom shaders that use the [code]VERTEX[/code] built-in "
-"operate with [code]VERTEX[/code] position [i]after[/i] skinning, whereas "
-"with hardware skinning, [code]VERTEX[/code] is the position [i]before[/i] "
-"skinning."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], forces snapping of vertices to pixels in 2D rendering. "
-"May help in some pixel art styles.\n"
-"This snapping is performed on the GPU in the vertex shader.\n"
-"Consider using the project setting [member rendering/batching/precision/"
-"uv_contract] to prevent artifacts."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"When batching is on, this regularly prints a frame diagnosis log. Note that "
-"this will degrade performance."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[b]Experimental.[/b] For regression testing against the old renderer. If "
-"this is switched on, and [code]use_batching[/code] is set, the renderer will "
-"swap alternately between using the old renderer, and the batched renderer, "
-"on each frame. This makes it easy to identify visual differences. "
-"Performance will be degraded."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lights have the potential to prevent joining items, and break many of the "
-"performance benefits of batching. This setting enables some complex logic to "
-"allow joining items if their lighting is similar, and overlap tests pass. "
-"This can significantly improve performance in some games. Set to 0 to switch "
-"off. With large values the cost of overlap tests may lead to diminishing "
-"returns."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the proportion of the total screen area (in pixels) that must be saved "
-"by a scissor operation in order to activate light scissoring. This can "
-"prevent parts of items being rendered outside the light area. Lower values "
-"scissor more aggressively. A value of 1 scissors none of the items, a value "
-"of 0 scissors every item. The power of 4 of the value is used, in order to "
-"emphasize the lower range, and multiplied by the total screen area in pixels "
-"to give the threshold. This can reduce fill rate requirements in scenes with "
-"a lot of lighting."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enabling this setting uses the legacy method to draw batches containing only "
-"one rect. The legacy method is faster (approx twice as fast), but can cause "
-"flicker on some systems. In order to directly compare performance with the "
-"non-batching renderer you can set this to true, but it is recommended to "
-"turn this off unless you can guarantee your target hardware will work with "
-"this method."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Turns 2D batching on and off. Batching increases performance by reducing the "
-"amount of graphics API drawcalls."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Switches on 2D batching within the editor."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Size of buffer reserved for batched vertices. Larger size enables larger "
-"batches, but there are diminishing returns for the memory used. This should "
-"only have a minor effect on performance."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Including color in the vertex format has a cost, however, not including "
-"color prevents batching across color changes. This threshold determines the "
-"ratio of [code]number of vertex color changes / total number of vertices[/"
-"code] above which vertices will be translated to colored format. A value of "
-"0 will always use colored vertices, 1 will never use colored vertices."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"In certain circumstances, the batcher can reorder items in order to better "
-"join them. This may result in better performance. An overlap test is needed "
-"however for each item lookahead, so there is a trade off, with diminishing "
-"returns. If you are getting no benefit, setting this to 0 will switch it off."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the number of commands to lookahead to determine whether to batch "
-"render items. A value of 1 can join items consisting of single commands, 0 "
-"turns off joining. Higher values are in theory more likely to join, however "
-"this has diminishing returns and has a runtime cost so a small value is "
-"recommended."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"On some platforms (especially mobile), precision issues in shaders can lead "
-"to reading 1 texel outside of bounds, particularly where rects are scaled. "
-"This can particularly lead to border artifacts around tiles in tilemaps.\n"
-"This adjustment corrects for this by making a small contraction to the UV "
-"coordinates used. Note that this can result in a slight squashing of border "
-"texels."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The amount of UV contraction. This figure is divided by 1000000, and is a "
-"proportion of the total texture dimensions, where the width and height are "
-"both ranged from 0.0 to 1.0.\n"
-"Use the default unless correcting for a problem on particular hardware."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Amount of light samples taken when using [constant BakedLightmap."
-"BAKE_QUALITY_HIGH]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Amount of light samples taken when using [constant BakedLightmap."
-"BAKE_QUALITY_LOW]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Amount of light samples taken when using [constant BakedLightmap."
-"BAKE_QUALITY_MEDIUM]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Amount of light samples taken when using [constant BakedLightmap."
-"BAKE_QUALITY_ULTRA]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Default background clear color. Overridable per [Viewport] using its "
-"[Environment]. See [member Environment.background_mode] and [member "
-"Environment.background_color] in particular. To change this default color "
-"programmatically, use [method VisualServer.set_default_clear_color]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"[Environment] that will be used as a fallback environment in case a scene "
-"does not specify its own environment. The default environment is loaded in "
-"at scene load time regardless of whether you have set an environment or not. "
-"If you do not rely on the fallback environment, it is best to delete "
-"[code]default_env.tres[/code], or to specify a different default environment "
-"here."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The use of half-float vertex compression may be producing rendering errors "
-"on some platforms (especially iOS). These have been seen particularly in "
-"particles. Disabling half-float may resolve these problems."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"iOS specific override for [member rendering/gles2/compatibility/"
-"disable_half_float], due to poor support for half-float vertex compression "
-"on many devices."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code] and available on the target Android device, enables "
-"high floating point precision for all shader computations in GLES2.\n"
-"[b]Warning:[/b] High floating point precision can be extremely slow on older "
-"devices and is often not available at all. Use with caution."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], every time an asynchronous shader compilation or an "
-"asynchronous shader reconstruction from cache starts or finishes, a line "
-"will be logged telling how many of those are happening.\n"
-"If the platform doesn't support parallel shader compile, but only the "
-"compile queue via a secondary GL context, what the message will tell is the "
-"number of shader compiles currently queued.\n"
-"[b]Note:[/b] This setting is only meaningful if [code]rendering/gles3/"
-"shaders/shader_compilation_mode[/code] is [b]not[/b] [code]Synchronous[/"
-"code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"This is the maximum number of shaders that can be compiled (or reconstructed "
-"from cache) at the same time.\n"
-"At runtime, while that count is reached, other shaders that can be "
-"asynchronously compiled will just use their fallback, without their setup "
-"being started until the count gets lower.\n"
-"This is a way to balance the CPU work between running the game and compiling "
-"the shaders. The goal is to have as many asynchronous compiles in flight as "
-"possible without impacting the responsiveness of the game, which beyond some "
-"point would destroy the benefits of asynchronous compilation. In other "
-"words, you may be able to afford that the FPS lowers a bit, and that will "
-"already be better than the stalling that synchronous compilation could "
-"cause.\n"
-"The default value is a conservative one, so you are advised to tweak it "
-"according to the hardware you are targeting.\n"
-"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
-"shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default is a very conservative override for [member rendering/gles3/"
-"shaders/max_simultaneous_compiles].\n"
-"Depending on the specific devices you are targeting, you may want to raise "
-"it.\n"
-"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
-"shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default is a very conservative override for [member rendering/gles3/"
-"shaders/max_simultaneous_compiles].\n"
-"Depending on the specific browsers you are targeting, you may want to raise "
-"it.\n"
-"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
-"shaders/shader_compilation_mode] is [b]not[/b] [code]Synchronous[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The maximum size, in megabytes, that the ubershader cache can grow up to. On "
-"startup, the least recently used entries will be deleted until the total "
-"size is within bounds.\n"
-"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
-"shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"An override for [member rendering/gles3/shaders/shader_cache_size_mb], so a "
-"smaller maximum size can be configured for mobile platforms, where storage "
-"space is more limited.\n"
-"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
-"shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"An override for [member rendering/gles3/shaders/shader_cache_size_mb], so a "
-"smaller maximum size can be configured for web platforms, where storage "
-"space is more limited.\n"
-"[b]Note:[/b] Currently, shader caching is generally unavailable on web "
-"platforms.\n"
-"[b]Note:[/b] This setting is only meaningful if [member rendering/gles3/"
-"shaders/shader_compilation_mode] is set to [code]Asynchronous + Cache[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If set to [code]Asynchronous[/code] and available on the target device, "
-"asynchronous compilation of shaders is enabled (in contrast to "
-"[code]Asynchronous[/code]).\n"
-"That means that when a shader is first used under some new rendering "
-"situation, the game won't stall while such shader is being compiled. "
-"Instead, a fallback will be used and the real shader will be compiled in the "
-"background. Once the actual shader is compiled, it will be used the next "
-"times it's used to draw a frame.\n"
-"Depending on the async mode configured for a given material/shader, the "
-"fallback will be an \"ubershader\" (the default) or just skip rendering any "
-"item it is applied to.\n"
-"An ubershader is a very complex shader, slow but suited to any rendering "
-"situation, that the engine generates internally so it can be used from the "
-"beginning while the traditional conditioned, optimized version of it is "
-"being compiled.\n"
-"To reduce loading times after the project has been launched at least once, "
-"you can use [code]Asynchronous + Cache[/code]. This also causes the "
-"ubershaders to be cached into storage so they can be ready faster next time "
-"they are used (provided the platform provides support for it).\n"
-"[b]Note:[/b] Asynchronous compilation is currently only supported for "
-"spatial (3D) and particle materials/shaders. CanvasItem (2D) shaders will "
-"not use asynchronous compilation even if this setting is set to "
-"[code]Asynchronous[/code] or [code]Asynchronous + Cache[/code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"An override for [member rendering/gles3/shaders/shader_compilation_mode], so "
-"asynchronous compilation can be disabled on mobile platforms.\n"
-"You may want to do that since mobile GPUs generally won't support "
-"ubershaders due to their complexity."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"An override for [member rendering/gles3/shaders/shader_compilation_mode], so "
-"asynchronous compilation can be disabled on web platforms.\n"
-"You may want to do that since certain browsers (especially on mobile "
-"platforms) generally won't support ubershaders due to their complexity."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max buffer size for blend shapes. Any blend shape bigger than this will not "
-"work."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max buffer size for drawing polygons. Any polygon bigger than this will not "
-"work."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max index buffer size for drawing polygons. Any polygon bigger than this "
-"will not work."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max buffer size for drawing immediate objects (ImmediateGeometry nodes). "
-"Nodes using more than this size will not work."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max number of lights renderable per object. This is further limited by "
-"hardware support. Most devices only support 409 lights, while many devices "
-"(especially mobile) only support 102. Setting this low will slightly reduce "
-"memory usage and may decrease shader compile times."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max amount of elements renderable in a frame. If more elements than this are "
-"visible per frame, they will not be drawn. Keep in mind elements refer to "
-"mesh surfaces and not meshes themselves. Setting this low will slightly "
-"reduce memory usage and may decrease shader compile times, particularly on "
-"web. For most uses, the default value is suitable, but consider lowering as "
-"much as possible on web export."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max number of lights renderable in a frame. If more lights than this number "
-"are used, they will be ignored. Setting this low will slightly reduce memory "
-"usage and may decrease shader compile times, particularly on web. For most "
-"uses, the default value is suitable, but consider lowering as much as "
-"possible on web export."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Max number of reflection probes renderable in a frame. If more reflection "
-"probes than this number are used, they will be ignored. Setting this low "
-"will slightly reduce memory usage and may decrease shader compile times, "
-"particularly on web. For most uses, the default value is suitable, but "
-"consider lowering as much as possible on web export."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Shaders have a time variable that constantly increases. At some point, it "
-"needs to be rolled back to zero to avoid precision errors on shader "
-"animations. This setting specifies when (in seconds)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the texture importer will import lossless textures "
-"using the PNG format. Otherwise, it will default to using WebP."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default compression level for lossless WebP. Higher levels result in "
-"smaller files at the cost of compression speed. Decompression speed is "
-"mostly unaffected by the compression level. Supported values are 0 to 9. "
-"Note that compression levels above 6 are very slow and offer very little "
-"savings."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"On import, mesh vertex data will be split into two streams within a single "
-"vertex buffer, one for position data and the other for interleaved "
-"attributes data. Recommended to be enabled if targeting mobile devices. "
-"Requires manual reimport of meshes after toggling."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Determines the maximum number of polygon occluders that will be used at any "
-"one time.\n"
-"Although you can have many occluders in a scene, each frame the system will "
-"choose from these the most relevant based on a screen space metric, in order "
-"to give the best overall performance.\n"
-"A greater number of polygons can potentially cull more objects, however the "
-"cost of culling calculations scales with the number of occluders."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Determines the maximum number of sphere occluders that will be used at any "
-"one time.\n"
-"Although you can have many occluders in a scene, each frame the system will "
-"choose from these the most relevant based on a screen space metric, in order "
-"to give the best overall performance."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The default convention is for portal normals to point outward (face outward) "
-"from the source room.\n"
-"If you accidentally build your level with portals facing the wrong way, this "
-"setting can fix the problem.\n"
-"It will flip named portal meshes (i.e. [code]-portal[/code]) on the initial "
-"conversion to [Portal] nodes."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Show conversion logs.\n"
-"[b]Note:[/b] This will automatically be disabled in exports."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], gameplay callbacks will be sent as [code]signals[/"
-"code]. If [code]false[/code], they will be sent as [code]notifications[/"
-"code]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If enabled, while merging meshes, the system will also attempt to remove "
-"[Spatial] nodes that no longer have any children.\n"
-"Reducing the number of [Node]s in the scene tree can make traversal more "
-"efficient, but can be switched off in case you wish to use empty [Spatial]s "
-"for markers or some other purpose."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Show logs during PVS generation.\n"
-"[b]Note:[/b] This will automatically be disabled in exports."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Uses a simplified method of generating PVS (potentially visible set) data. "
-"The results may not be accurate where more than one portal join adjacent "
-"rooms.\n"
-"[b]Note:[/b] Generally you should only use this option if you encounter bugs "
-"when it is set to [code]false[/code], i.e. there are problems with the "
-"default method."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], allocates the root [Viewport]'s framebuffer with high "
-"dynamic range. High dynamic range allows the use of [Color] values greater "
-"than 1. This must be set to [code]true[/code] for glow rendering to work if "
-"[member Environment.glow_hdr_threshold] is greater than or equal to "
-"[code]1.0[/code].\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/depth/hdr] on mobile "
-"devices, due to performance concerns or driver support. This must be set to "
-"[code]true[/code] for glow rendering to work if [member Environment."
-"glow_hdr_threshold] is greater than or equal to [code]1.0[/code].\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], allocates the root [Viewport]'s framebuffer with full "
-"floating-point precision (32-bit) instead of half floating-point precision "
-"(16-bit). Only effective when [member rendering/quality/depth/hdr] is also "
-"enabled.\n"
-"[b]Note:[/b] Enabling this setting does not improve rendering quality. Using "
-"full floating-point precision is slower, and is generally only needed for "
-"advanced shaders that require a high level of precision. To reduce banding, "
-"enable [member rendering/quality/filters/use_debanding] instead.\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Disables depth pre-pass for some GPU vendors (usually mobile), as their "
-"architecture already does this."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], performs a previous depth pass before rendering "
-"materials. This increases performance in scenes with high overdraw, when "
-"complex materials and lighting are used."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The directional shadow's size in pixels. Higher values will result in "
-"sharper shadows, at the cost of performance. The value will be rounded up to "
-"the nearest power of 2. This setting can be changed at run-time; the change "
-"will be applied immediately."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/directional_shadow/size] on "
-"mobile devices, due to performance concerns or driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The video driver to use (\"GLES2\" or \"GLES3\").\n"
-"[b]Note:[/b] The backend in use can be overridden at runtime via the [code]--"
-"video-driver[/code] command line argument, or by the [member rendering/"
-"quality/driver/fallback_to_gles2] option if the target system does not "
-"support GLES3 and falls back to GLES2. In such cases, this property is not "
-"updated, so use [method OS.get_current_video_driver] to query it at run-time."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], allows falling back to the GLES2 driver if the GLES3 "
-"driver is not supported.\n"
-"[b]Note:[/b] The two video drivers are not drop-in replacements for each "
-"other, so a game designed for GLES3 might not work properly when falling "
-"back to GLES2. In particular, some features of the GLES3 backend are not "
-"available in GLES2. Enabling this setting also means that both ETC and ETC2 "
-"VRAM-compressed textures will be exported on Android and iOS, increasing the "
-"data pack's size."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Maximum anisotropic filter level used for textures with anisotropy enabled. "
-"Higher values will result in sharper textures when viewed from oblique "
-"angles, at the cost of performance. With the exception of [code]1[/code], "
-"only power-of-two values are valid ([code]2[/code], [code]4[/code], [code]8[/"
-"code], [code]16[/code]). A value of [code]1[/code] forcibly disables "
-"anisotropic filtering, even on textures where it is enabled.\n"
-"[b]Note:[/b] For performance reasons, anisotropic filtering [i]is not "
-"enabled by default[/i] on textures. For this setting to have an effect, "
-"anisotropic texture filtering can be enabled by selecting a texture in the "
-"FileSystem dock, going to the Import dock, checking the [b]Anisotropic[/b] "
-"checkbox then clicking [b]Reimport[/b]. However, anisotropic filtering is "
-"rarely useful in 2D, so only enable it for textures in 2D if it makes a "
-"meaningful visual difference.\n"
-"[b]Note:[/b] This property is only read when the project starts. There is "
-"currently no way to change this setting at run-time."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Sets the number of MSAA samples to use. MSAA is used to reduce aliasing "
-"around the edges of polygons. A higher MSAA value results in smoother edges "
-"but can be significantly slower on some hardware.\n"
-"[b]Note:[/b] MSAA is not available on HTML5 export using the GLES2 backend."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If set to a value greater than [code]0.0[/code], contrast-adaptive "
-"sharpening will be applied to the 3D viewport. This has a low performance "
-"cost and can be used to recover some of the sharpness lost from using FXAA. "
-"Values around [code]0.5[/code] generally give the best results. See also "
-"[member rendering/quality/filters/use_fxaa]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], uses a fast post-processing filter to make banding "
-"significantly less visible in 3D. 2D rendering is [i]not[/i] affected by "
-"debanding unless the [member Environment.background_mode] is [constant "
-"Environment.BG_CANVAS]. In this case, [member rendering/quality/"
-"intended_usage/framebuffer_allocation] must also be set to [b]3D[/b].\n"
-"In some cases, debanding may introduce a slightly noticeable dithering "
-"pattern. It's recommended to enable debanding only when actually needed "
-"since the dithering pattern will make lossless-compressed screenshots "
-"larger.\n"
-"[b]Note:[/b] Only available on the GLES3 backend. [member rendering/quality/"
-"depth/hdr] must also be [code]true[/code] for debanding to be effective.\n"
-"[b]Note:[/b] There are known issues with debanding breaking rendering on "
-"mobile platforms. Due to this, it is recommended to leave this option "
-"disabled when targeting mobile platforms.\n"
-"[b]Note:[/b] This property is only read when the project starts. To set "
-"debanding at run-time, set [member Viewport.debanding] on the root "
-"[Viewport] instead."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enables FXAA in the root Viewport. FXAA is a popular screen-space "
-"antialiasing method, which is fast but will make the image look blurry, "
-"especially at lower resolutions. It can still work relatively well at large "
-"resolutions such as 1440p and 4K. Some of the lost sharpness can be "
-"recovered by enabling contrast-adaptive sharpening (see [member rendering/"
-"quality/filters/sharpen_intensity])."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], uses nearest-neighbor mipmap filtering when using "
-"mipmaps (also called \"bilinear filtering\"), which will result in visible "
-"seams appearing between mipmap stages. This may increase performance in "
-"mobile as less memory bandwidth is used. If [code]false[/code], linear "
-"mipmap filtering (also called \"trilinear filtering\") is used."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Strategy used for framebuffer allocation. The simpler it is, the less "
-"resources it uses (but the less features it supports). If set to \"2D "
-"Without Sampling\" or \"3D Without Effects\", sample buffers will not be "
-"allocated. This means [code]SCREEN_TEXTURE[/code] and [code]DEPTH_TEXTURE[/"
-"code] will not be available in shaders and post-processing effects such as "
-"glow will not be available in [Environment]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/intended_usage/"
-"framebuffer_allocation] on mobile devices, due to performance concerns or "
-"driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enable usage of bicubic sampling in baked lightmaps. This results in "
-"smoother looking lighting at the expense of more bandwidth usage. On GLES2, "
-"changes to this setting will only be applied upon restarting the application."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/lightmapping/"
-"use_bicubic_sampling] on mobile devices, in order to reduce bandwidth usage."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Size of the atlas used by reflection probes. A larger size can result in "
-"higher visual quality, while a smaller size will be faster and take up less "
-"memory."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Number of subdivisions to use for the reflection atlas. A higher number "
-"lowers the quality of each atlas, but allows you to use more."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], uses a high amount of samples to create blurred "
-"variants of reflection probes and panorama backgrounds (sky). Those blurred "
-"variants are used by rough materials."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/reflections/"
-"high_quality_ggx] on mobile devices, due to performance concerns or driver "
-"support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Limits the size of the irradiance map which is normally determined by "
-"[member Sky.radiance_size]. A higher size results in a higher quality "
-"irradiance map similarly to [member rendering/quality/reflections/"
-"high_quality_ggx]. Use a higher value when using high-frequency HDRI maps, "
-"otherwise keep this as low as possible.\n"
-"[b]Note:[/b] Low and mid range hardware do not support complex irradiance "
-"maps well and may crash if this is set too high."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], uses texture arrays instead of mipmaps for reflection "
-"probes and panorama backgrounds (sky). This reduces jitter noise on "
-"reflections, but costs more performance and memory."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/reflections/"
-"texture_array_reflections] on mobile devices, due to performance concerns or "
-"driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], uses faster but lower-quality Blinn model to generate "
-"blurred reflections instead of the GGX model."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/shading/"
-"force_blinn_over_ggx] on mobile devices, due to performance concerns or "
-"driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], uses faster but lower-quality Lambert material "
-"lighting model instead of Burley."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/shading/"
-"force_lambert_over_burley] on mobile devices, due to performance concerns or "
-"driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], forces vertex shading for all 3D [SpatialMaterial] and "
-"[ShaderMaterial] rendering. This can be used to improve performance on low-"
-"end mobile devices. The downside is that shading becomes much less accurate, "
-"with visible linear interpolation between vertices that are joined together. "
-"This can be compensated by ensuring meshes have a sufficient level of "
-"subdivision (but not too much, to avoid reducing performance). Some material "
-"features are also not supported when vertex shading is enabled.\n"
-"See also [member SpatialMaterial.flags_vertex_lighting] which can be used to "
-"enable vertex shading on specific materials only.\n"
-"[b]Note:[/b] This setting does not affect unshaded materials."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/shading/"
-"force_vertex_shading] on mobile devices, due to performance concerns or "
-"driver support. If lighting looks broken after exporting the project to a "
-"mobile platform, try disabling this setting."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], enables new physical light attenuation for "
-"[OmniLight]s and [SpotLight]s. This results in more realistic lighting "
-"appearance with a very small performance cost. When physical light "
-"attenuation is enabled, lights will appear to be darker as a result of the "
-"new attenuation formula. This can be compensated by adjusting the lights' "
-"energy or attenuation values.\n"
-"Changes to this setting will only be applied upon restarting the application."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Size for cubemap into which the shadow is rendered before being copied into "
-"the shadow atlas. A higher number can result in higher resolution shadows "
-"when used with a higher [member rendering/quality/shadow_atlas/size]. "
-"Setting higher than a quarter of the [member rendering/quality/shadow_atlas/"
-"size] will not result in a perceptible increase in visual quality."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Subdivision quadrant size for shadow mapping. See shadow mapping "
-"documentation."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Size for shadow atlas (used for OmniLights and SpotLights). The value will "
-"be rounded up to the nearest power of 2. See shadow mapping documentation."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/shadow_atlas/size] on "
-"mobile devices, due to performance concerns or driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Shadow filter mode. Higher-quality settings result in smoother shadows that "
-"flicker less when moving. \"Disabled\" is the fastest option, but also has "
-"the lowest quality. \"PCF5\" is smoother but is also slower. \"PCF13\" is "
-"the smoothest option, but is also the slowest.\n"
-"[b]Note:[/b] When using the GLES2 backend, the \"PCF13\" option actually "
-"uses 16 samples to emulate linear filtering in the shader. This results in a "
-"shadow appearance similar to the one produced by the GLES3 backend."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Lower-end override for [member rendering/quality/shadows/filter_mode] on "
-"mobile devices, due to performance concerns or driver support."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Forces [MeshInstance] to always perform skinning on the CPU (applies to both "
-"GLES2 and GLES3).\n"
-"See also [member rendering/quality/skinning/software_skinning_fallback]."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Allows [MeshInstance] to perform skinning on the CPU when the hardware "
-"doesn't support the default GPU skinning process with GLES2.\n"
-"If [code]false[/code], an alternative skinning process on the GPU is used in "
-"this case (slower in most cases).\n"
-"See also [member rendering/quality/skinning/force_software_skinning].\n"
-"[b]Note:[/b] When the software skinning fallback is triggered, custom vertex "
-"shaders will behave in a different way, because the bone transform will be "
-"already applied to the modelview matrix."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Additional expansion applied to object bounds in the 3D rendering bounding "
-"volume hierarchy. This can reduce BVH processing at the cost of a slightly "
-"reduced accuracy.\n"
-"The default value will work well in most situations. A value of 0.0 will "
-"turn this optimization off, and larger values may work better for larger, "
-"faster moving objects.\n"
-"[b]Note:[/b] Used only if [member ProjectSettings.rendering/quality/"
-"spatial_partitioning/use_bvh] is enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"The rendering octree balance can be changed to favor smaller ([code]0[/"
-"code]), or larger ([code]1[/code]) branches.\n"
-"Larger branches can increase performance significantly in some projects.\n"
-"[b]Note:[/b] Not used if [member ProjectSettings.rendering/quality/"
-"spatial_partitioning/use_bvh] is enabled."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Enables the use of bounding volume hierarchy instead of octree for rendering "
-"spatial partitioning. This may give better performance."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Improves quality of subsurface scattering, but cost significantly increases."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Quality setting for subsurface scattering (samples taken)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid "Max radius used for subsurface scattering samples."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Weight subsurface scattering samples. Helps to avoid reading samples from "
-"unrelated parts of the screen."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Use high-quality voxel cone tracing. This results in better-looking "
-"reflections, but is much more expensive on the GPU."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Thread model for rendering. Rendering on a thread can vastly improve "
-"performance, but synchronizing to the main thread can cause a bit more "
-"jitter."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], a thread safe version of BVH (bounding volume "
-"hierarchy) will be used in rendering and Godot physics.\n"
-"Try enabling this option if you see any visual anomalies in 3D (such as "
-"incorrect object visibility)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the texture importer will import VRAM-compressed "
-"textures using the BPTC algorithm. This texture compression algorithm is "
-"only supported on desktop platforms, and only when using the GLES3 "
-"renderer.\n"
-"[b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were "
-"already imported before. To make this setting apply to textures that were "
-"already imported, exit the editor, remove the [code].import/[/code] folder "
-"located inside the project folder then restart the editor (see [member "
-"application/config/use_hidden_project_data_directory])."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the texture importer will import VRAM-compressed "
-"textures using the Ericsson Texture Compression algorithm. This algorithm "
-"doesn't support alpha channels in textures.\n"
-"[b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were "
-"already imported before. To make this setting apply to textures that were "
-"already imported, exit the editor, remove the [code].import/[/code] folder "
-"located inside the project folder then restart the editor (see [member "
-"application/config/use_hidden_project_data_directory])."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the texture importer will import VRAM-compressed "
-"textures using the Ericsson Texture Compression 2 algorithm. This texture "
-"compression algorithm is only supported when using the GLES3 renderer.\n"
-"[b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were "
-"already imported before. To make this setting apply to textures that were "
-"already imported, exit the editor, remove the [code].import/[/code] folder "
-"located inside the project folder then restart the editor (see [member "
-"application/config/use_hidden_project_data_directory])."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the texture importer will import VRAM-compressed "
-"textures using the PowerVR Texture Compression algorithm. This texture "
-"compression algorithm is only supported on iOS.\n"
-"[b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were "
-"already imported before. To make this setting apply to textures that were "
-"already imported, exit the editor, remove the [code].import/[/code] folder "
-"located inside the project folder then restart the editor (see [member "
-"application/config/use_hidden_project_data_directory])."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"If [code]true[/code], the texture importer will import VRAM-compressed "
-"textures using the S3 Texture Compression algorithm. This algorithm is only "
-"supported on desktop platforms and consoles.\n"
-"[b]Note:[/b] Changing this setting does [i]not[/i] impact textures that were "
-"already imported before. To make this setting apply to textures that were "
-"already imported, exit the editor, remove the [code].import/[/code] folder "
-"located inside the project folder then restart the editor (see [member "
-"application/config/use_hidden_project_data_directory])."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Cell size used for the 2D hash grid that [VisibilityNotifier2D] uses (in "
-"pixels)."
-msgstr ""
-
-#: doc/classes/ProjectSettings.xml
-msgid ""
-"Objects can use this signal to restrict reading of settings only to "
-"situations where a change has been made."
-msgstr ""
-
-#: doc/classes/PropertyTweener.xml
-#, fuzzy
-msgid "Interpolates an [Object]'s property over time."
-msgstr ""
-"Animiert die Eigenschaften eines Knotens im Laufe der Zeit reibungslos."
-
-#: doc/classes/PropertyTweener.xml
-msgid ""
-"[PropertyTweener] is used to interpolate a property in an object. See "
-"[method SceneTreeTween.tween_property] for more usage information.\n"
-"[b]Note:[/b] [method SceneTreeTween.tween_property] is the only correct way "
-"to create [PropertyTweener]. Any [PropertyTweener] created manually will not "
-"function correctly."
-msgstr ""
-
-#: doc/classes/PropertyTweener.xml
-msgid ""
-"When called, the final value will be used as a relative value instead. "
-"Example:\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween()\n"
-"tween.tween_property(self, \"position\", Vector2.RIGHT * 100, 1)."
-"as_relative() #the node will move by 100 pixels to the right\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PropertyTweener.xml
-msgid ""
-"Sets a custom initial value to the [PropertyTweener]. Example:\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween()\n"
-"tween.tween_property(self, \"position\", Vector2(200, 100), 1)."
-"from(Vector2(100, 100) #this will move the node from position (100, 100) to "
-"(200, 100)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PropertyTweener.xml
-msgid ""
-"Makes the [PropertyTweener] use the current property value (i.e. at the time "
-"of creating this [PropertyTweener]) as a starting point. This is equivalent "
-"of using [method from] with the current value. These two calls will do the "
-"same:\n"
-"[codeblock]\n"
-"tween.tween_property(self, \"position\", Vector2(200, 100), 1)."
-"from(position)\n"
-"tween.tween_property(self, \"position\", Vector2(200, 100), 1)."
-"from_current()\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/PropertyTweener.xml
-msgid ""
-"Sets the time in seconds after which the [PropertyTweener] will start "
-"interpolating. By default there's no delay."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid "General-purpose 3D proximity detection node."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"General-purpose proximity detection node. [ProximityGroup] can be used for "
-"[i]approximate[/i] distance checks, which are faster than exact distance "
-"checks using [method Vector3.distance_to] or [method Vector3."
-"distance_squared_to].\n"
-"[ProximityGroup] nodes are automatically grouped together, as long as they "
-"share the same [member group_name] and intersect with each other. By calling "
-"the [method broadcast], you can invoke a specified method with various "
-"parameters to all intersecting members.\n"
-"[ProximityGroup] is cuboid-shaped and consists of a cluster of [Vector3] "
-"coordinates. The coordinates are automatically calculated by calling [member "
-"grid_radius]. To allow [ProximityGroup] to find its peers (and perform "
-"automatic grouping), you need to define its [member group_name] to a non-"
-"empty [String]. As soon as this object's shape intersects with another "
-"[ProximityGroup] object' shape, and both share the same [member group_name], "
-"they will belong together for as long as they intersect.\n"
-"Since [ProximityGroup] doesn't rely the physics engine, you don't need to "
-"add any other node as a child (unlike [PhysicsBody]).\n"
-"The [ProximityGroup] uses the [SceneTree] groups in the background by "
-"calling the method [method Node.add_to_group] internally. The [SceneTree] "
-"group names are constructed by combining the [member group_name] with its "
-"coordinates, which are calculated using the [member grid_radius] you defined "
-"beforehand.\n"
-"[b]Example:[/b] A [ProximityGroup] node named [code]\"PlanetEarth\"[/code] "
-"at position [code]Vector3(6, 6, 6)[/code] with a [member group_name] set to "
-"[code]\"planets\"[/code] and a [member grid_radius] of [code]Vector3(1, 2, 3)"
-"[/code] will create the following [SceneTree] group names:\n"
-"[codeblock]\n"
-"- \"planets|5|4|3\"\n"
-"- \"planets|5|4|4\"\n"
-"- \"planets|5|4|5\"\n"
-"- \"planets|5|4|6\"\n"
-"- \"planets|5|4|7\"\n"
-"- \"planets|5|4|8\"\n"
-"- \"planets|5|4|9\"\n"
-"- ...\n"
-"[/codeblock]\n"
-"If there is another [ProximityGroup] named [code]\"PlanetMars\"[/code] with "
-"group name [code]\"planets\"[/code], and one of its coordinates is "
-"[code]Vector3(5, 4, 7)[/code], it would normally create the [SceneTree] "
-"group called [code]\"planets|5|4|7\"[/code]. However, since this group name "
-"already exists, this [ProximityGroup] object will be [i]added[/i] to the "
-"existing one. [code]\"PlanetEarth\"[/code] is already in this group. As long "
-"as both nodes don't change their transform and stop intersecting (or exit "
-"the scene tree), they are grouped together. As long as this intersection "
-"exists, any call to [method broadcast] will affect [i]both[/i] "
-"[ProximityGroup] nodes.\n"
-"There are 3 caveats to keep in mind when using [ProximityGroup]:\n"
-"- The larger the grid radius, the more coordinates and the more [SceneTree] "
-"groups are created. This can have a performance impact if too many groups "
-"are created.\n"
-"- If the [ProximityGroup] node is transformed in any way (or is removed from "
-"the scene tree), the groupings will have to be recalculated. This can also "
-"have a performance impact.\n"
-"- If your [member grid_radius] is smaller than [code]Vector3(1, 1, 1)[/"
-"code], it will be rounded up to [code]Vector3(1, 1, 1)[/code]. Therefore, "
-"small grid radius values may lead to unwanted groupings.\n"
-"[b]Note:[/b] [ProximityGroup] will be removed in Godot 4.0 in favor of more "
-"effective and faster [VisibilityNotifier] functionality. For most use cases, "
-"[method Vector3.distance_to] or [method Vector3.distance_squared_to] are "
-"fast enough too, especially if you call them less often using a [Timer] node."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"Calls on all intersecting [ProximityGroup] the given method and parameters.\n"
-"If the [member dispatch_mode] is set to [constant MODE_PROXY] (the default), "
-"all calls are delegated to their respective parent [Node]."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"Specifies which node gets contacted on a call of method [method broadcast]."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"The size of the space in 3D units. This also sets the amount of coordinates "
-"required to calculate whether two [ProximityGroup] nodes are intersecting or "
-"not. Smaller [member grid_radius] values can be used for more precise "
-"proximity checks at the cost of performance, since more groups will be "
-"created."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"Specify the common group name, to let other [ProximityGroup] nodes know, if "
-"they should be auto-grouped with this node in case they intersect with each "
-"other.\n"
-"For example, if you have a [ProximityGroup] node named [code]\"Earth\"[/"
-"code] and another called [code]\"Mars\"[/code], with both nodes having "
-"[code]\"planet\"[/code] as their [member group_name]. Give both planets a "
-"significantly larger [member grid_radius] than their actual radius, position "
-"them close enough and they'll be automatically grouped."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"Emitted when the user calls the [method broadcast] method and has set "
-"[member dispatch_mode] to [constant MODE_SIGNAL].\n"
-"The given method and its parameters are passed on to the listeners who "
-"connected to this signal of this object, as well as any [ProximityGroup] "
-"node this node is grouped together with.\n"
-"[b]Note:[/b] This signal is [i]not[/i] emitted by default, as the default "
-"[member dispatch_mode] is [constant MODE_PROXY]."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid "This [ProximityGroup]'s parent will be target of [method broadcast]."
-msgstr ""
-
-#: doc/classes/ProximityGroup.xml
-msgid ""
-"This [ProximityGroup] will emit the [signal broadcast] [i]signal[/i] when "
-"calling the [method broadcast] [i]method[/i]."
-msgstr ""
-
-#: doc/classes/QuadMesh.xml
-msgid "Class representing a square mesh."
-msgstr ""
-
-#: doc/classes/QuadMesh.xml
-msgid ""
-"Class representing a square [PrimitiveMesh]. This flat mesh does not have a "
-"thickness. By default, this mesh is aligned on the X and Y axes; this "
-"default rotation is more suited for use with billboarded materials. Unlike "
-"[PlaneMesh], this mesh doesn't provide subdivision options."
-msgstr ""
-
-#: doc/classes/QuadMesh.xml doc/classes/Viewport.xml
-#: doc/classes/ViewportTexture.xml
-msgid "2D in 3D Demo"
-msgstr ""
-
-#: doc/classes/QuadMesh.xml
-msgid "Offset of the generated Quad. Useful for particles."
-msgstr ""
-
-#: doc/classes/QuadMesh.xml
-msgid "Size on the X and Y axes."
-msgstr "Größe auf der X- und Y-Achse."
-
-#: doc/classes/Quat.xml
-msgid "Quaternion."
-msgstr "Die Quaternion."
-
-#: doc/classes/Quat.xml
-msgid ""
-"A unit quaternion used for representing 3D rotations. Quaternions need to be "
-"normalized to be used for rotation.\n"
-"It is similar to Basis, which implements matrix representation of rotations, "
-"and can be parametrized using both an axis-angle pair or Euler angles. Basis "
-"stores rotation, scale, and shearing, while Quat only stores rotation.\n"
-"Due to its compactness and the way it is stored in memory, certain "
-"operations (obtaining axis-angle and performing SLERP, in particular) are "
-"more efficient and robust against floating-point errors."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid "Constructs a quaternion from the given [Basis]."
-msgstr "Konstruiert ein Quaternion aus der gegebenen [Basis]."
-
-#: doc/classes/Quat.xml
-msgid ""
-"Constructs a quaternion that will perform a rotation specified by Euler "
-"angles (in the YXZ convention: when decomposing, first Z, then X, and Y "
-"last), given in the vector format as (X angle, Y angle, Z angle)."
-msgstr ""
-"Konstruiert ein Quaternion, das eine Drehung ausführt, die durch Euler-"
-"Winkel (in der YXZ-Konvention: bei der Zerlegung zuerst Z, dann X und Y "
-"zuletzt) angegeben wird, die im Vektorformat als (X-Winkel, Y-Winkel, Z-"
-"Winkel) angegeben wird."
-
-#: doc/classes/Quat.xml
-msgid ""
-"Constructs a quaternion that will rotate around the given axis by the "
-"specified angle. The axis must be a normalized vector."
-msgstr ""
-"Konstruiert ein Quaternion, das sich um die angegebene Achse um den "
-"angegebenen Winkel dreht. Die Achse muss ein normalisierter Vektor sein."
-
-#: doc/classes/Quat.xml
-msgid "Constructs a quaternion defined by the given values."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Returns the angle between this quaternion and [code]to[/code]. This is the "
-"magnitude of the angle you would need to rotate by to get from one to the "
-"other.\n"
-"[b]Note:[/b] This method has an abnormally high amount of floating-point "
-"error, so methods such as [method @GDScript.is_zero_approx] will not work "
-"reliably."
-msgstr ""
-
-#: doc/classes/Quat.xml
-#, fuzzy
-msgid ""
-"Performs a cubic spherical interpolation between quaternions [code]pre_a[/"
-"code], this vector, [code]b[/code], and [code]post_b[/code], by the given "
-"amount [code]weight[/code]."
-msgstr ""
-"Führt eine kubische Interpolation zwischen den Vektoren [code]pre_a[/code], "
-"[code]a[/code], [code]b[/code], [code]post_b[/code] ([code]a[/code] ist "
-"aktuell), um den angegebenen Betrag [code]t[/code] durch. [code]t[/code] "
-"liegt im Bereich von 0,0 bis 1,0 und stellt den Betrag der Interpolation dar."
-
-#: doc/classes/Quat.xml
-msgid "Returns the dot product of two quaternions."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Returns Euler angles (in the YXZ convention: when decomposing, first Z, then "
-"X, and Y last) corresponding to the rotation represented by the unit "
-"quaternion. Returned vector contains the rotation angles in the format (X "
-"angle, Y angle, Z angle)."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid "Returns the inverse of the quaternion."
-msgstr ""
-
-#: doc/classes/Quat.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if this quaternion and [code]quat[/code] are "
-"approximately equal, by running [method @GDScript.is_equal_approx] on each "
-"component."
-msgstr ""
-"Gibt [code]true[/code] falls dieser Vektor und Vektor [code]v[/code] "
-"ungefähr gleich sind, wobei [method @GDScript.is_equal_approx] mit beiden "
-"Komponenten aufgerufen wird."
-
-#: doc/classes/Quat.xml
-msgid "Returns whether the quaternion is normalized or not."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid "Returns the length of the quaternion."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid "Returns the length of the quaternion, squared."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid "Returns a copy of the quaternion, normalized to unit length."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Sets the quaternion to a rotation which rotates around axis by the specified "
-"angle, in radians. The axis must be a normalized vector."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Sets the quaternion to a rotation specified by Euler angles (in the YXZ "
-"convention: when decomposing, first Z, then X, and Y last), given in the "
-"vector format as (X angle, Y angle, Z angle)."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Returns the result of the spherical linear interpolation between this "
-"quaternion and [code]to[/code] by amount [code]weight[/code].\n"
-"[b]Note:[/b] Both quaternions must be normalized."
-msgstr ""
-"Gibt das Ergebnis der sphärischen Linearinterpolation zwischen diesem "
-"Quaternion und [code]to[/code] nach Betrag [code]weight[/code].\n"
-"[b]Note:[/b] Beide Quaternionen müssen normalisiert sein."
-
-#: doc/classes/Quat.xml
-msgid ""
-"Returns the result of the spherical linear interpolation between this "
-"quaternion and [code]to[/code] by amount [code]weight[/code], but without "
-"checking if the rotation path is not bigger than 90 degrees."
-msgstr ""
-"Gibt das Ergebnis der sphärischen Linearinterpolation zwischen diesem "
-"Quaternion und [code]to[/code] nach Betrag [code]weight[/code], jedoch ohne "
-"zu überprüfen, ob der Rotationspfad nicht größer als 90 Grad ist."
-
-#: doc/classes/Quat.xml
-msgid "Returns a vector transformed (multiplied) by this quaternion."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"W component of the quaternion (real part).\n"
-"Quaternion components should usually not be manipulated directly."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"X component of the quaternion (imaginary [code]i[/code] axis part).\n"
-"Quaternion components should usually not be manipulated directly."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Y component of the quaternion (imaginary [code]j[/code] axis part).\n"
-"Quaternion components should usually not be manipulated directly."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"Z component of the quaternion (imaginary [code]k[/code] axis part).\n"
-"Quaternion components should usually not be manipulated directly."
-msgstr ""
-
-#: doc/classes/Quat.xml
-msgid ""
-"The identity quaternion, representing no rotation. Equivalent to an identity "
-"[Basis] matrix. If a vector is transformed by an identity quaternion, it "
-"will not change."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid "A class for generating pseudo-random numbers."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"RandomNumberGenerator is a class for generating pseudo-random numbers. It "
-"currently uses [url=http://www.pcg-random.org/]PCG32[/url].\n"
-"[b]Note:[/b] The underlying algorithm is an implementation detail. As a "
-"result, it should not be depended upon for reproducible random streams "
-"across Godot versions.\n"
-"To generate a random float number (within a given range) based on a time-"
-"dependant seed:\n"
-"[codeblock]\n"
-"var rng = RandomNumberGenerator.new()\n"
-"func _ready():\n"
-"    rng.randomize()\n"
-"    var my_random_number = rng.randf_range(-10.0, 10.0)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] The default values of [member seed] and [member state] "
-"properties are pseudo-random, and changes when calling [method randomize]. "
-"The [code]0[/code] value documented here is a placeholder, and not the "
-"actual default seed."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid "Random number generation"
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"Generates a pseudo-random float between [code]0.0[/code] and [code]1.0[/"
-"code] (inclusive)."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"Generates a pseudo-random float between [code]from[/code] and [code]to[/"
-"code] (inclusive)."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"Generates a [url=https://en.wikipedia.org/wiki/Normal_distribution]normally-"
-"distributed[/url] pseudo-random number, using Box-Muller transform with the "
-"specified [code]mean[/code] and a standard [code]deviation[/code]. This is "
-"also called Gaussian distribution."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"Generates a pseudo-random 32-bit unsigned integer between [code]0[/code] and "
-"[code]4294967295[/code] (inclusive)."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"Generates a pseudo-random 32-bit signed integer between [code]from[/code] "
-"and [code]to[/code] (inclusive)."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid "Setups a time-based seed to generator."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"Initializes the random number generator state based on the given seed value. "
-"A given seed will give a reproducible sequence of pseudo-random numbers.\n"
-"[b]Note:[/b] The RNG does not have an avalanche effect, and can output "
-"similar random streams given similar seeds. Consider using a hash function "
-"to improve your seed quality if they're sourced externally.\n"
-"[b]Note:[/b] Setting this property produces a side effect of changing the "
-"internal [member state], so make sure to initialize the seed [i]before[/i] "
-"modifying the [member state]:\n"
-"[codeblock]\n"
-"var rng = RandomNumberGenerator.new()\n"
-"rng.seed = hash(\"Godot\")\n"
-"rng.state = 100 # Restore to some previously saved state.\n"
-"[/codeblock]\n"
-"[b]Warning:[/b] the getter of this property returns the previous [member "
-"state], and not the initial seed value, which is going to be fixed in Godot "
-"4.0."
-msgstr ""
-
-#: doc/classes/RandomNumberGenerator.xml
-msgid ""
-"The current state of the random number generator. Save and restore this "
-"property to restore the generator to a previous state:\n"
-"[codeblock]\n"
-"var rng = RandomNumberGenerator.new()\n"
-"print(rng.randf())\n"
-"var saved_state = rng.state # Store current state.\n"
-"print(rng.randf()) # Advance internal state.\n"
-"rng.state = saved_state # Restore the state.\n"
-"print(rng.randf()) # Prints the same value as in previous.\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Do not set state to arbitrary values, since the random number "
-"generator requires the state to have certain qualities to behave properly. "
-"It should only be set to values that came from the state property itself. To "
-"initialize the random number generator with arbitrary input, use [member "
-"seed] instead."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid "Abstract base class for range-based controls."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Range is a base class for [Control] nodes that change a floating-point "
-"[member value] between a [member min_value] and [member max_value], using a "
-"configured [member step] and [member page] size. See e.g. [ScrollBar] and "
-"[Slider] for examples of higher level nodes using Range."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Binds two [Range]s together along with any ranges previously grouped with "
-"either of them. When any of range's member variables change, it will share "
-"the new value with all other ranges in its group."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid "Stops the [Range] from sharing its member variables with any other."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"If [code]true[/code], [member value] may be greater than [member max_value]."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"If [code]true[/code], [member value] may be less than [member min_value]."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"If [code]true[/code], and [code]min_value[/code] is greater than 0, "
-"[code]value[/code] will be represented exponentially rather than linearly."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Maximum value. Range is clamped if [code]value[/code] is greater than "
-"[code]max_value[/code]."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Minimum value. Range is clamped if [code]value[/code] is less than "
-"[code]min_value[/code]."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Page size. Used mainly for [ScrollBar]. ScrollBar's length is its size "
-"multiplied by [code]page[/code] over the difference between [code]min_value[/"
-"code] and [code]max_value[/code]."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid "The value mapped between 0 and 1."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"If [code]true[/code], [code]value[/code] will always be rounded to the "
-"nearest integer."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"If greater than 0, [code]value[/code] will always be rounded to a multiple "
-"of [code]step[/code]. If [code]rounded[/code] is also [code]true[/code], "
-"[code]value[/code] will first be rounded to a multiple of [code]step[/code] "
-"then rounded to the nearest integer."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid "Range's current value."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Emitted when [member min_value], [member max_value], [member page], or "
-"[member step] change."
-msgstr ""
-
-#: doc/classes/Range.xml
-msgid ""
-"Emitted when [member value] changes. When used on a [Slider], this is called "
-"continuously while dragging (potentially every frame). If you are performing "
-"an expensive operation in a function connected to [signal value_changed], "
-"consider using a [i]debouncing[/i] [Timer] to call the function less often.\n"
-"[b]Note:[/b] Unlike signals such as [signal LineEdit.text_changed], [signal "
-"value_changed] is also emitted when [code]value[/code] is set directly via "
-"code."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid "Query the closest object intersecting a ray."
-msgstr ""
-
-#: doc/classes/RayCast.xml
-msgid ""
-"A RayCast represents a line from its origin to its destination position, "
-"[code]cast_to[/code]. It is used to query the 3D space in order to find the "
-"closest object along the path of the ray.\n"
-"RayCast can ignore some objects by adding them to the exception list via "
-"[code]add_exception[/code] or by setting proper filtering with collision "
-"layers and masks.\n"
-"RayCast can be configured to report collisions with [Area]s ([member "
-"collide_with_areas]) and/or [PhysicsBody]s ([member collide_with_bodies]).\n"
-"Only enabled raycasts will be able to query the space and report "
-"collisions.\n"
-"RayCast calculates intersection every physics frame (see [Node]), and the "
-"result is cached so it can be used later until the next frame. If multiple "
-"queries are required between physics frames (or during the same frame), use "
-"[method force_raycast_update] after adjusting the raycast."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Adds a collision exception so the ray does not report collisions with the "
-"specified node."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Adds a collision exception so the ray does not report collisions with the "
-"specified [RID]."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid "Removes all collision exceptions for this ray."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Updates the collision information for the ray. Use this method to update the "
-"collision information immediately instead of waiting for the next "
-"[code]_physics_process[/code] call, for example if the ray or its parent has "
-"changed state.\n"
-"[b]Note:[/b] [code]enabled[/code] is not required for this to work."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Returns the first object that the ray intersects, or [code]null[/code] if no "
-"object is intersecting the ray (i.e. [method is_colliding] returns "
-"[code]false[/code])."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Returns the shape ID of the first object that the ray intersects, or "
-"[code]0[/code] if no object is intersecting the ray (i.e. [method "
-"is_colliding] returns [code]false[/code])."
-msgstr ""
-
-#: doc/classes/RayCast.xml
-msgid ""
-"Returns [code]true[/code] if the bit index passed is turned on.\n"
-"[b]Note:[/b] Bit indices range from 0-19."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Returns the normal of the intersecting object's shape at the collision point."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Returns the collision point at which the ray intersects the closest object.\n"
-"[b]Note:[/b] This point is in the [b]global[/b] coordinate system."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Returns whether any object is intersecting with the ray's vector "
-"(considering the vector length)."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Removes a collision exception so the ray does report collisions with the "
-"specified node."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"Removes a collision exception so the ray does report collisions with the "
-"specified [RID]."
-msgstr ""
-
-#: doc/classes/RayCast.xml
-msgid ""
-"Sets the bit index passed to the [code]value[/code] passed.\n"
-"[b]Note:[/b] Bit indexes range from 0-19."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid ""
-"The ray's destination point, relative to the RayCast's [code]position[/code]."
-msgstr ""
-
-#: doc/classes/RayCast.xml
-#, fuzzy
-msgid "If [code]true[/code], collision with [Area]s will be reported."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/RayCast.xml
-#, fuzzy
-msgid "If [code]true[/code], collision with [PhysicsBody]s will be reported."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-#, fuzzy
-msgid ""
-"The ray's collision mask. Only objects in at least one collision layer "
-"enabled in the mask will be detected. See [url=$DOCS_URL/tutorials/physics/"
-"physics_introduction.html#collision-layers-and-masks]Collision layers and "
-"masks[/url] in the documentation for more information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/RayCast.xml
-msgid ""
-"The custom color to use to draw the shape in the editor and at run-time if "
-"[b]Visible Collision Shapes[/b] is enabled in the [b]Debug[/b] menu. This "
-"color will be highlighted at run-time if the [RayCast] is colliding with "
-"something.\n"
-"If set to [code]Color(0.0, 0.0, 0.0)[/code] (by default), the color set in "
-"[member ProjectSettings.debug/shapes/collision/shape_color] is used."
-msgstr ""
-
-#: doc/classes/RayCast.xml
-msgid ""
-"If set to [code]1[/code], a line is used as the debug shape. Otherwise, a "
-"truncated pyramid is drawn to represent the [RayCast]. Requires [b]Visible "
-"Collision Shapes[/b] to be enabled in the [b]Debug[/b] menu for the debug "
-"shape to be visible at run-time."
-msgstr ""
-
-#: doc/classes/RayCast.xml doc/classes/RayCast2D.xml
-msgid "If [code]true[/code], collisions will be reported."
-msgstr ""
-
-#: doc/classes/RayCast.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], collisions will be ignored for this RayCast's "
-"immediate parent."
-msgstr ""
-"Wenn [code]true[/code], ist das einklappen für dieses TreeItem deaktiviert."
-
-#: doc/classes/RayCast2D.xml
-msgid ""
-"A RayCast represents a line from its origin to its destination position, "
-"[code]cast_to[/code]. It is used to query the 2D space in order to find the "
-"closest object along the path of the ray.\n"
-"RayCast2D can ignore some objects by adding them to the exception list via "
-"[code]add_exception[/code], by setting proper filtering with collision "
-"layers, or by filtering object types with type masks.\n"
-"RayCast2D can be configured to report collisions with [Area2D]s ([member "
-"collide_with_areas]) and/or [PhysicsBody2D]s ([member "
-"collide_with_bodies]).\n"
-"Only enabled raycasts will be able to query the space and report "
-"collisions.\n"
-"RayCast2D calculates intersection every physics frame (see [Node]), and the "
-"result is cached so it can be used later until the next frame. If multiple "
-"queries are required between physics frames (or during the same frame) use "
-"[method force_raycast_update] after adjusting the raycast."
-msgstr ""
-
-#: doc/classes/RayCast2D.xml
-msgid ""
-"Sets or clears individual bits on the collision mask. This makes selecting "
-"the areas scanned easier."
-msgstr ""
-
-#: doc/classes/RayCast2D.xml
-msgid "If [code]true[/code], collision with [Area2D]s will be reported."
-msgstr ""
-
-#: doc/classes/RayCast2D.xml
-msgid "If [code]true[/code], collision with [PhysicsBody2D]s will be reported."
-msgstr ""
-
-#: doc/classes/RayCast2D.xml
-msgid ""
-"If [code]true[/code], the parent node will be excluded from collision "
-"detection."
-msgstr ""
-
-#: doc/classes/RayShape.xml
-msgid "Ray shape for 3D collisions."
-msgstr ""
-
-#: doc/classes/RayShape.xml
-msgid ""
-"Ray shape for 3D collisions, which can be set into a [PhysicsBody] or "
-"[Area]. A ray is not really a collision body; instead, it tries to separate "
-"itself from whatever is touching its far endpoint. It's often useful for "
-"characters."
-msgstr ""
-
-#: doc/classes/RayShape.xml doc/classes/RayShape2D.xml
-msgid "The ray's length."
-msgstr ""
-
-#: doc/classes/RayShape.xml doc/classes/RayShape2D.xml
-msgid "If [code]true[/code], allow the shape to return the correct normal."
-msgstr ""
-
-#: doc/classes/RayShape2D.xml
-msgid "Ray shape for 2D collisions."
-msgstr ""
-
-#: doc/classes/RayShape2D.xml
-msgid ""
-"Ray shape for 2D collisions. A ray is not really a collision body; instead, "
-"it tries to separate itself from whatever is touching its far endpoint. It's "
-"often useful for characters."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-#, fuzzy
-msgid "2D axis-aligned bounding box."
-msgstr "Achsen-Ausgerichtete Begrenzungs Box."
-
-#: doc/classes/Rect2.xml
-#, fuzzy
-msgid ""
-"[Rect2] consists of a position, a size, and several utility functions. It is "
-"typically used for fast overlap tests.\n"
-"It uses floating-point coordinates.\n"
-"The 3D counterpart to [Rect2] is [AABB]."
-msgstr ""
-"AABB besteht aus einer Position, einer Größe und mehreren Hilfsfunktionen. "
-"Es wird typischerweise für schnelle Überlappungstests verwendet."
-
-#: doc/classes/Rect2.xml
-msgid "Constructs a [Rect2] by position and size."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid "Constructs a [Rect2] by x, y, width, and height."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns a [Rect2] with equivalent position and area, modified so that the "
-"top-left corner is the origin and [code]width[/code] and [code]height[/code] "
-"are positive."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid "Returns the intersection of this [Rect2] and b."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns [code]true[/code] if this [Rect2] completely encloses another one."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns a copy of this [Rect2] expanded to include a given point.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"# position (-3, 2), size (1, 1)\n"
-"var rect = Rect2(Vector2(-3, 2), Vector2(1, 1))\n"
-"# position (-3, -1), size (3, 4), so we fit both rect and Vector2(0, -1)\n"
-"var rect2 = rect.expand(Vector2(0, -1))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Rect2.xml
-#, fuzzy
-msgid "Returns the area of the [Rect2]. See also [method has_no_area]."
-msgstr "Gibt die inverse Quadratwurzel des Parameters zurück."
-
-#: doc/classes/Rect2.xml
-#, fuzzy
-msgid ""
-"Returns the center of the [Rect2], which is equal to [member position] + "
-"([member size] / 2)."
-msgstr "Gibt das Verhältnis von [member x] zu [member y] zurück."
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns a copy of the [Rect2] grown a given amount of units towards all the "
-"sides."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns a copy of the [Rect2] grown a given amount of units towards each "
-"direction individually."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns a copy of the [Rect2] grown a given amount of units towards the "
-"[enum Margin] direction."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns [code]true[/code] if the [Rect2] is flat or empty, [code]false[/"
-"code] otherwise. See also [method get_area].\n"
-"[b]Note:[/b] If the [Rect2] has a negative size and is not flat or empty, "
-"[method has_no_area] will return [code]true[/code]."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns [code]true[/code] if the [Rect2] contains a point. By convention, "
-"the right and bottom edges of the [Rect2] are considered exclusive, so "
-"points on these edges are [b]not[/b] included.\n"
-"[b]Note:[/b] This method is not reliable for [Rect2] with a [i]negative "
-"size[/i]. Use [method abs] to get a positive sized equivalent rectangle to "
-"check for contained points."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns [code]true[/code] if the [Rect2] overlaps with [code]b[/code] (i.e. "
-"they have at least one point in common).\n"
-"If [code]include_borders[/code] is [code]true[/code], they will also be "
-"considered overlapping if their borders touch, even without intersection."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid ""
-"Returns [code]true[/code] if this [Rect2] and [code]rect[/code] are "
-"approximately equal, by calling [code]is_equal_approx[/code] on each "
-"component."
-msgstr ""
-
-#: doc/classes/Rect2.xml
-msgid "Returns a larger [Rect2] that contains this [Rect2] and [code]b[/code]."
-msgstr ""
-
-#: doc/classes/RectangleShape2D.xml
-msgid "Rectangle shape for 2D collisions."
-msgstr ""
-
-#: doc/classes/RectangleShape2D.xml
-msgid ""
-"Rectangle shape for 2D collisions. This shape is useful for modeling box-"
-"like 2D objects."
-msgstr ""
-
-#: doc/classes/RectangleShape2D.xml
-msgid ""
-"The rectangle's half extents. The width and height of this shape is twice "
-"the half extents."
-msgstr ""
-
-#: doc/classes/Reference.xml
-msgid "Base class for reference-counted objects."
-msgstr ""
-
-#: doc/classes/Reference.xml
-msgid ""
-"Base class for any object that keeps a reference count. [Resource] and many "
-"other helper objects inherit this class.\n"
-"Unlike other [Object] types, References keep an internal reference counter "
-"so that they are automatically released when no longer in use, and only "
-"then. References therefore do not need to be freed manually with [method "
-"Object.free].\n"
-"In the vast majority of use cases, instantiating and using [Reference]-"
-"derived types is all you need to do. The methods provided in this class are "
-"only for advanced users, and can cause issues if misused.\n"
-"[b]Note:[/b] In C#, references will not be freed instantly after they are no "
-"longer in use. Instead, garbage collection will run periodically and will "
-"free references that are no longer in use. This means that unused references "
-"will linger on for a while before being removed."
-msgstr ""
-
-#: doc/classes/Reference.xml
-msgid ""
-"Initializes the internal reference counter. Use this only if you really know "
-"what you are doing.\n"
-"Returns whether the initialization was successful."
-msgstr ""
-
-#: doc/classes/Reference.xml
-msgid ""
-"Increments the internal reference counter. Use this only if you really know "
-"what you are doing.\n"
-"Returns [code]true[/code] if the increment was successful, [code]false[/"
-"code] otherwise."
-msgstr ""
-
-#: doc/classes/Reference.xml
-msgid ""
-"Decrements the internal reference counter. Use this only if you really know "
-"what you are doing.\n"
-"Returns [code]true[/code] if the decrement was successful, [code]false[/"
-"code] otherwise."
-msgstr ""
-
-#: doc/classes/ReferenceRect.xml
-msgid "Reference frame for GUI."
-msgstr ""
-
-#: doc/classes/ReferenceRect.xml
-msgid ""
-"A rectangle box that displays only a [member border_color] border color "
-"around its rectangle. [ReferenceRect] has no fill [Color]. If you need to "
-"display a rectangle filled with a solid color, consider using [ColorRect] "
-"instead."
-msgstr ""
-
-#: doc/classes/ReferenceRect.xml
-msgid "Sets the border [Color] of the [ReferenceRect]."
-msgstr ""
-
-#: doc/classes/ReferenceRect.xml
-msgid ""
-"Sets the border width of the [ReferenceRect]. The border grows both inwards "
-"and outwards with respect to the rectangle box."
-msgstr ""
-
-#: doc/classes/ReferenceRect.xml
-msgid ""
-"If set to [code]true[/code], the [ReferenceRect] will only be visible while "
-"in editor. Otherwise, [ReferenceRect] will be visible in game."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Captures its surroundings to create fast, accurate reflections from a given "
-"point."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Capture its surroundings as a dual paraboloid image, and stores versions of "
-"it with increasing levels of blur to simulate different material "
-"roughnesses.\n"
-"The [ReflectionProbe] is used to create high-quality reflections at a low "
-"performance cost (when [member update_mode] is [constant UPDATE_ONCE]). "
-"[ReflectionProbe]s can be blended together and with the rest of the scene "
-"smoothly. [ReflectionProbe]s can also be combined with [GIProbe] and screen-"
-"space reflections ([member Environment.ss_reflections_enabled]) to get more "
-"accurate reflections in specific areas. [ReflectionProbe]s render all "
-"objects within their [member cull_mask], so updating them can be quite "
-"expensive. It is best to update them once with the important static objects "
-"and then leave them as-is.\n"
-"[b]Note:[/b] Unlike [GIProbe], [ReflectionProbe]s only source their "
-"environment from a [WorldEnvironment] node. If you specify an [Environment] "
-"resource within a [Camera] node, it will be ignored by the "
-"[ReflectionProbe]. This can lead to incorrect lighting within the "
-"[ReflectionProbe].\n"
-"[b]Note:[/b] By default, Godot will only render 16 reflection probes. If you "
-"need more, increase the number of atlas subdivisions. This setting can be "
-"found in [member ProjectSettings.rendering/quality/reflections/"
-"atlas_subdiv].\n"
-"[b]Note:[/b] The GLES2 backend will only display two reflection probes at "
-"the same time for a single mesh. If possible, split up large meshes that "
-"span over multiple reflection probes into smaller ones."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"If [code]true[/code], enables box projection. This makes reflections look "
-"more correct in rectangle-shaped rooms by offsetting the reflection center "
-"depending on the camera's location.\n"
-"[b]Note:[/b] To better fit rectangle-shaped rooms that are not aligned to "
-"the grid, you can rotate the [ReflectionProbe] node."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Sets the cull mask which determines what objects are drawn by this probe. "
-"Every [VisualInstance] with a layer included in this cull mask will be "
-"rendered by the probe. To improve performance, it is best to only include "
-"large objects which are likely to take up a lot of space in the reflection."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"If [code]true[/code], computes shadows in the reflection probe. This makes "
-"the reflection probe slower to render; you may want to disable this if using "
-"the [constant UPDATE_ALWAYS] [member update_mode]."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"The size of the reflection probe. The larger the extents the more space "
-"covered by the probe which will lower the perceived resolution. It is best "
-"to keep the extents only as large as you need them.\n"
-"[b]Note:[/b] To better fit areas that are not aligned to the grid, you can "
-"rotate the [ReflectionProbe] node."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Defines the reflection intensity. Intensity modulates the strength of the "
-"reflection."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Sets the ambient light color to be used when this probe is set to [member "
-"interior_enable]."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Sets the contribution value for how much the reflection affects the ambient "
-"light for this reflection probe when set to [member interior_enable]. Useful "
-"so that ambient light matches the color of the room."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Sets the energy multiplier for this reflection probe's ambient light "
-"contribution when set to [member interior_enable]."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"If [code]true[/code], reflections will ignore sky contribution. Ambient "
-"lighting is then controlled by the [code]interior_ambient_*[/code] "
-"properties."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"The maximum distance away from the [ReflectionProbe] an object can be before "
-"it is culled. Decrease this to improve performance, especially when using "
-"the [constant UPDATE_ALWAYS] [member update_mode].\n"
-"[b]Note:[/b] The maximum reflection distance is always at least equal to the "
-"[member extents]. This means that decreasing [member max_distance] will not "
-"always cull objects from reflections, especially if the reflection probe's "
-"[member extents] are already large."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Sets the origin offset to be used when this [ReflectionProbe] is in [member "
-"box_projection] mode. This can be set to a non-zero value to ensure a "
-"reflection fits a rectangle-shaped room, while reducing the amount of "
-"objects that \"get in the way\" of the reflection."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Sets how frequently the [ReflectionProbe] is updated. Can be [constant "
-"UPDATE_ONCE] or [constant UPDATE_ALWAYS]."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Update the probe once on the next frame (recommended for most objects). The "
-"corresponding radiance map will be generated over the following six frames. "
-"This takes more time to update than [constant UPDATE_ALWAYS], but it has a "
-"lower performance cost and can result in higher-quality reflections. The "
-"ReflectionProbe is updated when its transform changes, but not when nearby "
-"geometry changes. You can force a [ReflectionProbe] update by moving the "
-"[ReflectionProbe] slightly in any direction."
-msgstr ""
-
-#: doc/classes/ReflectionProbe.xml
-msgid ""
-"Update the probe every frame. This provides better results for fast-moving "
-"dynamic objects (such as cars). However, it has a significant performance "
-"cost. Due to the cost, it's recommended to only use one ReflectionProbe with "
-"[constant UPDATE_ALWAYS] at most per scene. For all other use cases, use "
-"[constant UPDATE_ONCE]."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid "Class for searching text for patterns using regular expressions."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"A regular expression (or regex) is a compact language that can be used to "
-"recognise strings that follow a specific pattern, such as URLs, email "
-"addresses, complete sentences, etc. For instance, a regex of [code]ab[0-9][/"
-"code] would find any string that is [code]ab[/code] followed by any number "
-"from [code]0[/code] to [code]9[/code]. For a more in-depth look, you can "
-"easily find various tutorials and detailed explanations on the Internet.\n"
-"To begin, the RegEx object needs to be compiled with the search pattern "
-"using [method compile] before it can be used.\n"
-"[codeblock]\n"
-"var regex = RegEx.new()\n"
-"regex.compile(\"\\\\w-(\\\\d+)\")\n"
-"[/codeblock]\n"
-"The search pattern must be escaped first for GDScript before it is escaped "
-"for the expression. For example, [code]compile(\"\\\\d+\")[/code] would be "
-"read by RegEx as [code]\\d+[/code]. Similarly, [code]compile(\"\\\"(?:\\\\\\"
-"\\.|[^\\\"])*\\\"\")[/code] would be read as [code]\"(?:\\\\.|[^\"])*\"[/"
-"code].\n"
-"Using [method search], you can find the pattern within the given text. If a "
-"pattern is found, [RegExMatch] is returned and you can retrieve details of "
-"the results using methods such as [method RegExMatch.get_string] and [method "
-"RegExMatch.get_start].\n"
-"[codeblock]\n"
-"var regex = RegEx.new()\n"
-"regex.compile(\"\\\\w-(\\\\d+)\")\n"
-"var result = regex.search(\"abc n-0123\")\n"
-"if result:\n"
-"    print(result.get_string()) # Would print n-0123\n"
-"[/codeblock]\n"
-"The results of capturing groups [code]()[/code] can be retrieved by passing "
-"the group number to the various methods in [RegExMatch]. Group 0 is the "
-"default and will always refer to the entire pattern. In the above example, "
-"calling [code]result.get_string(1)[/code] would give you [code]0123[/code].\n"
-"This version of RegEx also supports named capturing groups, and the names "
-"can be used to retrieve the results. If two or more groups have the same "
-"name, the name would only refer to the first one with a match.\n"
-"[codeblock]\n"
-"var regex = RegEx.new()\n"
-"regex.compile(\"d(?<digit>[0-9]+)|x(?<digit>[0-9a-f]+)\")\n"
-"var result = regex.search(\"the number is x2f\")\n"
-"if result:\n"
-"    print(result.get_string(\"digit\")) # Would print 2f\n"
-"[/codeblock]\n"
-"If you need to process multiple results, [method search_all] generates a "
-"list of all non-overlapping results. This can be combined with a [code]for[/"
-"code] loop for convenience.\n"
-"[codeblock]\n"
-"for result in regex.search_all(\"d01, d03, d0c, x3f and x42\"):\n"
-"    print(result.get_string(\"digit\"))\n"
-"# Would print 01 03 0 3f 42\n"
-"[/codeblock]\n"
-"[b]Example of splitting a string using a RegEx:[/b]\n"
-"[codeblock]\n"
-"var regex = RegEx.new()\n"
-"regex.compile(\"\\\\S+\") # Negated whitespace character class.\n"
-"var results = []\n"
-"for result in regex.search_all(\"One  Two \\n\\tThree\"):\n"
-"    results.push_back(result.get_string())\n"
-"# The `results` array now contains \"One\", \"Two\", \"Three\".\n"
-"[/codeblock]\n"
-"[b]Note:[/b] Godot's regex implementation is based on the [url=https://www."
-"pcre.org/]PCRE2[/url] library. You can view the full pattern reference "
-"[url=https://www.pcre.org/current/doc/html/pcre2pattern.html]here[/url].\n"
-"[b]Tip:[/b] You can use [url=https://regexr.com/]Regexr[/url] to test "
-"regular expressions online."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"This method resets the state of the object, as if it was freshly created. "
-"Namely, it unassigns the regular expression of this object."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"Compiles and assign the search pattern to use. Returns [constant OK] if the "
-"compilation is successful. If an error is encountered, details are printed "
-"to standard output and an error is returned."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid "Returns the number of capturing groups in compiled pattern."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"Returns an array of names of named capturing groups in the compiled pattern. "
-"They are ordered by appearance."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid "Returns the original search pattern that was compiled."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid "Returns whether this object has a valid search pattern assigned."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"Searches the text for the compiled pattern. Returns a [RegExMatch] container "
-"of the first matching result if found, otherwise [code]null[/code].\n"
-"The region to search within can be specified with [code]offset[/code] and "
-"[code]end[/code]. This is useful when searching for another match in the "
-"same [code]subject[/code] by calling this method again after a previous "
-"success. Setting these parameters differs from passing over a shortened "
-"string. For example, the start anchor [code]^[/code] is not affected by "
-"[code]offset[/code], and the character before [code]offset[/code] will be "
-"checked for the word boundary [code]\\b[/code]."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"Searches the text for the compiled pattern. Returns an array of [RegExMatch] "
-"containers for each non-overlapping result. If no results were found, an "
-"empty array is returned instead.\n"
-"The region to search within can be specified with [code]offset[/code] and "
-"[code]end[/code]. This is useful when searching for another match in the "
-"same [code]subject[/code] by calling this method again after a previous "
-"success. Setting these parameters differs from passing over a shortened "
-"string. For example, the start anchor [code]^[/code] is not affected by "
-"[code]offset[/code], and the character before [code]offset[/code] will be "
-"checked for the word boundary [code]\\b[/code]."
-msgstr ""
-
-#: modules/regex/doc_classes/RegEx.xml
-msgid ""
-"Searches the text for the compiled pattern and replaces it with the "
-"specified string. Escapes and backreferences such as [code]$1[/code] and "
-"[code]$name[/code] are expanded and resolved. By default, only the first "
-"instance is replaced, but it can be changed for all instances (global "
-"replacement).\n"
-"The region to search within can be specified with [code]offset[/code] and "
-"[code]end[/code]. This is useful when searching for another match in the "
-"same [code]subject[/code] by calling this method again after a previous "
-"success. Setting these parameters differs from passing over a shortened "
-"string. For example, the start anchor [code]^[/code] is not affected by "
-"[code]offset[/code], and the character before [code]offset[/code] will be "
-"checked for the word boundary [code]\\b[/code]."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid "Contains the results of a [RegEx] search."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid ""
-"Contains the results of a single [RegEx] match returned by [method RegEx."
-"search] and [method RegEx.search_all]. It can be used to find the position "
-"and range of the match and its capturing groups, and it can extract its "
-"substring for you."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid ""
-"Returns the end position of the match within the source string. The end "
-"position of capturing groups can be retrieved by providing its group number "
-"as an integer or its string name (if it's a named group). The default value "
-"of 0 refers to the whole pattern.\n"
-"Returns -1 if the group did not match or doesn't exist."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid "Returns the number of capturing groups."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid ""
-"Returns the starting position of the match within the source string. The "
-"starting position of capturing groups can be retrieved by providing its "
-"group number as an integer or its string name (if it's a named group). The "
-"default value of 0 refers to the whole pattern.\n"
-"Returns -1 if the group did not match or doesn't exist."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid ""
-"Returns the substring of the match from the source string. Capturing groups "
-"can be retrieved by providing its group number as an integer or its string "
-"name (if it's a named group). The default value of 0 refers to the whole "
-"pattern.\n"
-"Returns an empty string if the group did not match or doesn't exist."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid ""
-"A dictionary of named groups and its corresponding group number. Only groups "
-"that were matched are included. If multiple groups have the same name, that "
-"name would refer to the first matching one."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid "An [Array] of the match and its capturing groups."
-msgstr ""
-
-#: modules/regex/doc_classes/RegExMatch.xml
-msgid ""
-"The source string used with the search pattern to find this matching result."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml
-msgid ""
-"RemoteTransform pushes its own [Transform] to another [Spatial] derived Node "
-"in the scene."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml
-msgid ""
-"RemoteTransform pushes its own [Transform] to another [Spatial] derived Node "
-"(called the remote node) in the scene.\n"
-"It can be set to update another Node's position, rotation and/or scale. It "
-"can use either global or local coordinates."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml
-#, fuzzy
-msgid ""
-"[RemoteTransform] caches the remote node. It may not notice if the remote "
-"node disappears; [method force_update_cache] forces it to update the cache "
-"again."
-msgstr ""
-"Der [AnimationPlayer] speichert animierte Knoten im Cache. Er bemerkt "
-"möglicherweise nicht, wenn ein Knoten verschwindet; [method clear_caches] "
-"zwingt ihn, den Cache erneut zu aktualisieren."
-
-#: doc/classes/RemoteTransform.xml
-msgid ""
-"The [NodePath] to the remote node, relative to the RemoteTransform's "
-"position in the scene."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml doc/classes/RemoteTransform2D.xml
-msgid "If [code]true[/code], the remote node's position is updated."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml doc/classes/RemoteTransform2D.xml
-msgid "If [code]true[/code], the remote node's rotation is updated."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml doc/classes/RemoteTransform2D.xml
-msgid "If [code]true[/code], the remote node's scale is updated."
-msgstr ""
-
-#: doc/classes/RemoteTransform.xml doc/classes/RemoteTransform2D.xml
-msgid ""
-"If [code]true[/code], global coordinates are used. If [code]false[/code], "
-"local coordinates are used."
-msgstr ""
-
-#: doc/classes/RemoteTransform2D.xml
-msgid ""
-"RemoteTransform2D pushes its own [Transform2D] to another [CanvasItem] "
-"derived Node in the scene."
-msgstr ""
-
-#: doc/classes/RemoteTransform2D.xml
-msgid ""
-"RemoteTransform2D pushes its own [Transform2D] to another [CanvasItem] "
-"derived Node (called the remote node) in the scene.\n"
-"It can be set to update another Node's position, rotation and/or scale. It "
-"can use either global or local coordinates."
-msgstr ""
-
-#: doc/classes/RemoteTransform2D.xml
-msgid ""
-"[RemoteTransform2D] caches the remote node. It may not notice if the remote "
-"node disappears; [method force_update_cache] forces it to update the cache "
-"again."
-msgstr ""
-
-#: doc/classes/RemoteTransform2D.xml
-msgid ""
-"The [NodePath] to the remote node, relative to the RemoteTransform2D's "
-"position in the scene."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid "Base class for all resources."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Resource is the base class for all Godot-specific resource types, serving "
-"primarily as data containers. Since they inherit from [Reference], resources "
-"are reference-counted and freed when no longer in use. They are also cached "
-"once loaded from disk, so that any further attempts to load a resource from "
-"a given path will return the same reference (all this in contrast to a "
-"[Node], which is not reference-counted and can be instanced from disk as "
-"many times as desired). Resources can be saved externally on disk or bundled "
-"into another object, such as a [Node] or another resource.\n"
-"[b]Note:[/b] In C#, resources will not be freed instantly after they are no "
-"longer in use. Instead, garbage collection will run periodically and will "
-"free resources that are no longer in use. This means that unused resources "
-"will linger on for a while before being removed."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid "Resources"
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Virtual function which can be overridden to customize the behavior value of "
-"[method setup_local_to_scene]."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Duplicates the resource, returning a new resource with the exported members "
-"copied. [b]Note:[/b] To duplicate the resource the constructor is called "
-"without arguments. This method will error when the constructor doesn't have "
-"default values.\n"
-"By default, sub-resources are shared between resource copies for efficiency. "
-"This can be changed by passing [code]true[/code] to the [code]subresources[/"
-"code] argument which will copy the subresources.\n"
-"[b]Note:[/b] If [code]subresources[/code] is [code]true[/code], this method "
-"will only perform a shallow copy. Nested resources within subresources will "
-"not be duplicated and will still be shared.\n"
-"[b]Note:[/b] When duplicating a resource, only [code]export[/code]ed "
-"properties are copied. Other properties will be set to their default value "
-"in the new resource."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Emits the [signal changed] signal.\n"
-"If external objects which depend on this resource should be updated, this "
-"method must be called manually whenever the state of this resource has "
-"changed (such as modification of properties).\n"
-"The method is equivalent to:\n"
-"[codeblock]\n"
-"emit_signal(\"changed\")\n"
-"[/codeblock]\n"
-"[b]Note:[/b] This method is called automatically for built-in resources."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"If [member resource_local_to_scene] is enabled and the resource was loaded "
-"from a [PackedScene] instantiation, returns the local scene where this "
-"resource's unique copy is in use. Otherwise, returns [code]null[/code]."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Returns the RID of the resource (or an empty RID). Many resources (such as "
-"[Texture], [Mesh], etc) are high-level abstractions of resources stored in a "
-"server, so this function will return the original RID."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"This method is called when a resource with [member resource_local_to_scene] "
-"enabled is loaded from a [PackedScene] instantiation. Its behavior can be "
-"customized by overriding [method _setup_local_to_scene] from script.\n"
-"For most resources, this method performs no base logic. [ViewportTexture] "
-"performs custom logic to properly set the proxy texture and flags in the "
-"local viewport."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Sets the path of the resource, potentially overriding an existing cache "
-"entry for this path. This differs from setting [member resource_path], as "
-"the latter would error out if another resource was already cached for the "
-"given path."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"If [code]true[/code], the resource will be made unique in each instance of "
-"its local scene. It can thus be modified in a scene instance without "
-"impacting other instances of that same scene."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"The name of the resource. This is an optional identifier. If [member "
-"resource_name] is not empty, its value will be displayed to represent the "
-"current resource in the editor inspector. For built-in scripts, the [member "
-"resource_name] will be displayed as the tab name in the script editor."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"The path to the resource. In case it has its own file, it will return its "
-"filepath. If it's tied to the scene, it will return the scene's path, "
-"followed by the resource's index."
-msgstr ""
-
-#: doc/classes/Resource.xml
-msgid ""
-"Emitted whenever the resource changes.\n"
-"[b]Note:[/b] This signal is not emitted automatically for custom resources, "
-"which means that you need to create a setter and emit the signal yourself."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid "Loads a specific resource type from a file."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid ""
-"Godot loads resources in the editor or in exported games using "
-"ResourceFormatLoaders. They are queried automatically via the "
-"[ResourceLoader] singleton, or when a resource with internal dependencies is "
-"loaded. Each file type may load as a different resource type, so multiple "
-"ResourceFormatLoaders are registered in the engine.\n"
-"Extending this class allows you to define your own loader. Be sure to "
-"respect the documented return types and values. You should give it a global "
-"class name with [code]class_name[/code] for it to be registered. Like built-"
-"in ResourceFormatLoaders, it will be called automatically when loading "
-"resources of its handled type(s). You may also implement a "
-"[ResourceFormatSaver].\n"
-"[b]Note:[/b] You can also extend [EditorImportPlugin] if the resource type "
-"you need exists but Godot is unable to load its format. Choosing one way "
-"over another depends on if the format is suitable or not for the final "
-"exported game. For example, it's better to import [code].png[/code] textures "
-"as [code].stex[/code] ([StreamTexture]) first, so they can be loaded with "
-"better efficiency on the graphics card."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid ""
-"If implemented, gets the dependencies of a given resource. If "
-"[code]add_types[/code] is [code]true[/code], paths should be appended "
-"[code]::TypeName[/code], where [code]TypeName[/code] is the class name of "
-"the dependency.\n"
-"[b]Note:[/b] Custom resource types defined by scripts aren't known by the "
-"[ClassDB], so you might just return [code]\"Resource\"[/code] for them."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid "Gets the list of extensions for files this loader is able to read."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid ""
-"Gets the class name of the resource associated with the given path. If the "
-"loader cannot handle it, it should return [code]\"\"[/code].\n"
-"[b]Note:[/b] Custom resource types defined by scripts aren't known by the "
-"[ClassDB], so you might just return [code]\"Resource\"[/code] for them."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid ""
-"Tells which resource class this loader can load.\n"
-"[b]Note:[/b] Custom resource types defined by scripts aren't known by the "
-"[ClassDB], so you might just handle [code]\"Resource\"[/code] for them."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid ""
-"Loads a resource when the engine finds this loader to be compatible. If the "
-"loaded resource is the result of an import, [code]original_path[/code] will "
-"target the source file. Returns a [Resource] object on success, or an [enum "
-"Error] constant in case of failure."
-msgstr ""
-
-#: doc/classes/ResourceFormatLoader.xml
-msgid ""
-"If implemented, renames dependencies within the given resource and saves it. "
-"[code]renames[/code] is a dictionary [code]{ String => String }[/code] "
-"mapping old dependency paths to new paths.\n"
-"Returns [constant OK] on success, or an [enum Error] constant in case of "
-"failure."
-msgstr ""
-
-#: doc/classes/ResourceFormatSaver.xml
-msgid "Saves a specific resource type to a file."
-msgstr ""
-
-#: doc/classes/ResourceFormatSaver.xml
-msgid ""
-"The engine can save resources when you do it from the editor, or when you "
-"use the [ResourceSaver] singleton. This is accomplished thanks to multiple "
-"[ResourceFormatSaver]s, each handling its own format and called "
-"automatically by the engine.\n"
-"By default, Godot saves resources as [code].tres[/code] (text-based), [code]."
-"res[/code] (binary) or another built-in format, but you can choose to create "
-"your own format by extending this class. Be sure to respect the documented "
-"return types and values. You should give it a global class name with "
-"[code]class_name[/code] for it to be registered. Like built-in "
-"ResourceFormatSavers, it will be called automatically when saving resources "
-"of its recognized type(s). You may also implement a [ResourceFormatLoader]."
-msgstr ""
-
-#: doc/classes/ResourceFormatSaver.xml
-msgid ""
-"Returns the list of extensions available for saving the resource object, "
-"provided it is recognized (see [method recognize])."
-msgstr ""
-
-#: doc/classes/ResourceFormatSaver.xml
-msgid "Returns whether the given resource object can be saved by this saver."
-msgstr ""
-
-#: doc/classes/ResourceFormatSaver.xml
-msgid ""
-"Saves the given resource object to a file at the target [code]path[/code]. "
-"[code]flags[/code] is a bitmask composed with [enum ResourceSaver."
-"SaverFlags] constants.\n"
-"Returns [constant OK] on success, or an [enum Error] constant in case of "
-"failure."
-msgstr ""
-
-#: doc/classes/ResourceImporter.xml
-msgid "Base class for the implementation of core resource importers."
-msgstr ""
-
-#: doc/classes/ResourceImporter.xml
-msgid ""
-"This is the base class for the resource importers implemented in core. To "
-"implement your own resource importers using editor plugins, see "
-"[EditorImportPlugin]."
-msgstr ""
-
-#: doc/classes/ResourceImporter.xml
-msgid "Import plugins"
-msgstr ""
-
-#: doc/classes/ResourceImporter.xml
-msgid "The default import order."
-msgstr ""
-
-#: doc/classes/ResourceImporter.xml
-msgid ""
-"The import order for scenes, which ensures scenes are imported [i]after[/i] "
-"all other core resources such as textures. Custom importers should generally "
-"have an import order lower than [code]100[/code] to avoid issues when "
-"importing scenes that rely on custom resources."
-msgstr ""
-
-#: doc/classes/ResourceInteractiveLoader.xml
-#, fuzzy
-msgid "Interactive [Resource] loader."
-msgstr "Kann keine Ressource erfassen Fehler."
-
-#: doc/classes/ResourceInteractiveLoader.xml
-msgid ""
-"Interactive [Resource] loader. This object is returned by [ResourceLoader] "
-"when performing an interactive load. It allows loading resources with high "
-"granularity, which makes it mainly useful for displaying loading bars or "
-"percentages."
-msgstr ""
-
-#: doc/classes/ResourceInteractiveLoader.xml
-#, fuzzy
-msgid ""
-"Returns the loaded resource if the load operation completed successfully, "
-"[code]null[/code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn dieser Bereich vollendet ist, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/ResourceInteractiveLoader.xml
-msgid ""
-"Returns the load stage. The total amount of stages can be queried with "
-"[method get_stage_count]."
-msgstr ""
-
-#: doc/classes/ResourceInteractiveLoader.xml
-msgid ""
-"Returns the total amount of stages (calls to [method poll]) needed to "
-"completely load this resource."
-msgstr ""
-
-#: doc/classes/ResourceInteractiveLoader.xml
-msgid ""
-"Polls the loading operation, i.e. loads a data chunk up to the next stage.\n"
-"Returns [constant OK] if the poll is successful but the load operation has "
-"not finished yet (intermediate stage). This means [method poll] will have to "
-"be called again until the last stage is completed.\n"
-"Returns [constant ERR_FILE_EOF] if the load operation has completed "
-"successfully. The loaded resource can be obtained by calling [method "
-"get_resource].\n"
-"Returns another [enum Error] code if the poll has failed."
-msgstr ""
-
-#: doc/classes/ResourceInteractiveLoader.xml
-msgid ""
-"Polls the loading operation successively until the resource is completely "
-"loaded or a [method poll] fails.\n"
-"Returns [constant ERR_FILE_EOF] if the load operation has completed "
-"successfully. The loaded resource can be obtained by calling [method "
-"get_resource].\n"
-"Returns another [enum Error] code if a poll has failed, aborting the "
-"operation."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid "Singleton used to load resource files."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Singleton used to load resource files from the filesystem.\n"
-"It uses the many [ResourceFormatLoader] classes registered in the engine "
-"(either built-in or from a plugin) to load files into memory and convert "
-"them to a format that can be used by the engine."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Returns whether a recognized resource exists for the given [code]path[/"
-"code].\n"
-"An optional [code]type_hint[/code] can be used to further specify the "
-"[Resource] type that should be handled by the [ResourceFormatLoader]."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Returns the dependencies for the resource at the given [code]path[/code]."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid "Returns the list of recognized extensions for a resource type."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"[i]Deprecated method.[/i] Use [method has_cached] or [method exists] instead."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Returns whether a cached resource is available for the given [code]path[/"
-"code].\n"
-"Once a resource has been loaded by the engine, it is cached in memory for "
-"faster access, and future calls to the [method load] or [method "
-"load_interactive] methods will use the cached version. The cached resource "
-"can be overridden by using [method Resource.take_over_path] on a new "
-"resource for that same path."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Loads a resource at the given [code]path[/code], caching the result for "
-"further access.\n"
-"The registered [ResourceFormatLoader]s are queried sequentially to find the "
-"first one which can handle the file's extension, and then attempt loading. "
-"If loading fails, the remaining ResourceFormatLoaders are also attempted.\n"
-"An optional [code]type_hint[/code] can be used to further specify the "
-"[Resource] type that should be handled by the [ResourceFormatLoader]. "
-"Anything that inherits from [Resource] can be used as a type hint, for "
-"example [Image].\n"
-"If [code]no_cache[/code] is [code]true[/code], the resource cache will be "
-"bypassed and the resource will be loaded anew. Otherwise, the cached "
-"resource will be returned if it exists.\n"
-"Returns an empty resource if no [ResourceFormatLoader] could handle the "
-"file.\n"
-"GDScript has a simplified [method @GDScript.load] built-in method which can "
-"be used in most situations, leaving the use of [ResourceLoader] for more "
-"advanced scenarios."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Starts loading a resource interactively. The returned "
-"[ResourceInteractiveLoader] object allows to load with high granularity, "
-"calling its [method ResourceInteractiveLoader.poll] method successively to "
-"load chunks.\n"
-"An optional [code]type_hint[/code] can be used to further specify the "
-"[Resource] type that should be handled by the [ResourceFormatLoader]. "
-"Anything that inherits from [Resource] can be used as a type hint, for "
-"example [Image]."
-msgstr ""
-
-#: doc/classes/ResourceLoader.xml
-msgid ""
-"Changes the behavior on missing sub-resources. The default behavior is to "
-"abort loading."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid "Resource Preloader Node."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid ""
-"This node is used to preload sub-resources inside a scene, so when the scene "
-"is loaded, all the resources are ready to use and can be retrieved from the "
-"preloader.\n"
-"GDScript has a simplified [method @GDScript.preload] built-in method which "
-"can be used in most situations, leaving the use of [ResourcePreloader] for "
-"more advanced scenarios."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid ""
-"Adds a resource to the preloader with the given [code]name[/code]. If a "
-"resource with the given [code]name[/code] already exists, the new resource "
-"will be renamed to \"[code]name[/code] N\" where N is an incrementing number "
-"starting from 2."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid "Returns the resource associated to [code]name[/code]."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid "Returns the list of resources inside the preloader."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid ""
-"Returns [code]true[/code] if the preloader contains a resource associated to "
-"[code]name[/code]."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid ""
-"Removes the resource associated to [code]name[/code] from the preloader."
-msgstr ""
-
-#: doc/classes/ResourcePreloader.xml
-msgid ""
-"Renames a resource inside the preloader from [code]name[/code] to "
-"[code]newname[/code]."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid "Singleton for saving Godot-specific resource types."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Singleton for saving Godot-specific resource types to the filesystem.\n"
-"It uses the many [ResourceFormatSaver] classes registered in the engine "
-"(either built-in or from a plugin) to save engine-specific resource data to "
-"text-based (e.g. [code].tres[/code] or [code].tscn[/code]) or binary files "
-"(e.g. [code].res[/code] or [code].scn[/code])."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Returns the list of extensions available for saving a resource of a given "
-"type."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Saves a resource to disk to the given path, using a [ResourceFormatSaver] "
-"that recognizes the resource object.\n"
-"The [code]flags[/code] bitmask can be specified to customize the save "
-"behavior.\n"
-"Returns [constant OK] on success."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid "Save the resource with a path relative to the scene which uses it."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid "Bundles external resources."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Changes the [member Resource.resource_path] of the saved resource to match "
-"its new location."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Do not save editor-specific metadata (identified by their [code]__editor[/"
-"code] prefix)."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid "Save as big endian (see [member File.endian_swap])."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Compress the resource on save using [constant File.COMPRESSION_ZSTD]. Only "
-"available for binary resource types."
-msgstr ""
-
-#: doc/classes/ResourceSaver.xml
-msgid ""
-"Take over the paths of the saved subresources (see [method Resource."
-"take_over_path])."
-msgstr ""
-
-#: doc/classes/RichTextEffect.xml
-msgid "A custom effect for use with [RichTextLabel]."
-msgstr ""
-
-#: doc/classes/RichTextEffect.xml
-msgid ""
-"A custom effect for use with [RichTextLabel].\n"
-"[b]Note:[/b] For a [RichTextEffect] to be usable, a BBCode tag must be "
-"defined as a member variable called [code]bbcode[/code] in the script.\n"
-"[codeblock]\n"
-"# The RichTextEffect will be usable like this: `[example]Some text[/"
-"example]`\n"
-"var bbcode = \"example\"\n"
-"[/codeblock]\n"
-"[b]Note:[/b] As soon as a [RichTextLabel] contains at least one "
-"[RichTextEffect], it will continuously process the effect unless the project "
-"is paused. This may impact battery life negatively."
-msgstr ""
-
-#: doc/classes/RichTextEffect.xml
-msgid ""
-"Override this method to modify properties in [code]char_fx[/code]. The "
-"method must return [code]true[/code] if the character could be transformed "
-"successfully. If the method returns [code]false[/code], it will skip "
-"transformation to avoid displaying broken text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Label that displays rich text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Rich text can contain custom text, fonts, images and some basic formatting. "
-"The label manages these as an internal tag stack. It also adapts itself to "
-"given width/heights.\n"
-"[b]Note:[/b] Assignments to [member bbcode_text] clear the tag stack and "
-"reconstruct it from the property's contents. Any edits made to [member "
-"bbcode_text] will erase previous edits made from other manual sources such "
-"as [method append_bbcode] and the [code]push_*[/code] / [method pop] "
-"methods.\n"
-"[b]Note:[/b] RichTextLabel doesn't support entangled BBCode tags. For "
-"example, instead of using [code][b]bold[i]bold italic[/b]italic[/i][/code], "
-"use [code][b]bold[i]bold italic[/i][/b][i]italic[/i][/code].\n"
-"[b]Note:[/b] [code]push_*/pop[/code] functions won't affect BBCode.\n"
-"[b]Note:[/b] Unlike [Label], RichTextLabel doesn't have a [i]property[/i] to "
-"horizontally align text to the center. Instead, enable [member "
-"bbcode_enabled] and surround the text in a [code][center][/code] tag as "
-"follows: [code][center]Example[/center][/code]. There is currently no built-"
-"in way to vertically align text either, but this can be emulated by relying "
-"on anchors/containers and the [member fit_content_height] property.\n"
-"[b]Note:[/b] Unicode characters after [code]0xffff[/code] (such as most "
-"emoji) are [i]not[/i] supported on Windows. They will display as unknown "
-"characters instead. This will be resolved in Godot 4.0."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "BBCode in RichTextLabel"
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "GUI Rich Text/BBcode Demo"
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds an image's opening and closing tags to the tag stack, optionally "
-"providing a [code]width[/code] and [code]height[/code] to resize the image.\n"
-"If [code]width[/code] or [code]height[/code] is set to 0, the image size "
-"will be adjusted in order to keep the original aspect ratio."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds raw non-BBCode-parsed text to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Parses [code]bbcode[/code] and adds tags to the tag stack as needed.\n"
-"[b]Note:[/b] Using this method, you can't close a tag that was opened in a "
-"previous [method append_bbcode] call. This is done to improve performance, "
-"especially when updating large RichTextLabels since rebuilding the whole "
-"BBCode every time would be slower. If you absolutely need to close a tag in "
-"a future method call, append the [member bbcode_text] instead of using "
-"[method append_bbcode].\n"
-"[b]Note:[/b] This method internals' can't possibly fail, but an error code "
-"is returned for backwards compatibility, which will always be [constant OK]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Clears the tag stack and sets [member bbcode_text] to an empty string."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Returns the height of the content."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Returns the total number of newlines in the tag stack's text tags. Considers "
-"wrapped text as one line."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-#, fuzzy
-msgid "Returns the current selection text. Does not include BBCodes."
-msgstr "Gibt den aktuell wiedergegebenen Animationszustand zurück."
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Returns the total number of characters from text tags. Does not include "
-"BBCodes."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Returns the number of visible lines."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Installs a custom effect. [code]effect[/code] should be a valid "
-"[RichTextEffect]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a newline tag to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The assignment version of [method append_bbcode]. Clears the tag stack and "
-"inserts the new content.\n"
-"[b]Note:[/b] This method internals' can't possibly fail, but an error code "
-"is returned for backwards compatibility, which will always be [constant OK]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Parses BBCode parameter [code]expressions[/code] into a dictionary."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Terminates the current tag. Use after [code]push_*[/code] methods to close "
-"BBCodes manually. Does not need to follow [code]add_*[/code] methods."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds an [code][align][/code] tag based on the given [code]align[/code] "
-"value. See [enum Align] for possible values."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][font][/code] tag with a bold font to the tag stack. This is "
-"the same as adding a [code][b][/code] tag if not currently in a [code][i][/"
-"code] tag."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][font][/code] tag with a bold italics font to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][cell][/code] tag to the tag stack. Must be inside a [code]"
-"[table][/code] tag. See [method push_table] for details."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a [code][color][/code] tag to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][font][/code] tag to the tag stack. Overrides default fonts for "
-"its duration."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds an [code][indent][/code] tag to the tag stack. Multiplies [code]level[/"
-"code] by current [member tab_size] to determine new margin length."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][font][/code] tag with a italics font to the tag stack. This is "
-"the same as adding a [code][i][/code] tag if not currently in a [code][b][/"
-"code] tag."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][list][/code] tag to the tag stack. Similar to the BBCodes "
-"[code][ol][/code] or [code][ul][/code], but supports more list types. Not "
-"fully implemented!"
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Adds a [code][meta][/code] tag to the tag stack. Similar to the BBCode [code]"
-"[url=something]{text}[/url][/code], but supports non-[String] metadata types."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a [code][font][/code] tag with a monospace font to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a [code][font][/code] tag with a normal font to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a [code][s][/code] tag to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a [code][table=columns][/code] tag to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Adds a [code][u][/code] tag to the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Removes a line of content from the label. Returns [code]true[/code] if the "
-"line exists.\n"
-"The [code]line[/code] argument is the index of the line to remove, it can "
-"take values in the interval [code][0, get_line_count() - 1][/code]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Scrolls the window's top line to match [code]line[/code]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Edits the selected column's expansion options. If [code]expand[/code] is "
-"[code]true[/code], the column expands in proportion to its expansion ratio "
-"versus the other columns' ratios.\n"
-"For example, 2 columns with ratios 3 and 4 plus 70 pixels in available width "
-"would expand 30 and 40 pixels, respectively.\n"
-"If [code]expand[/code] is [code]false[/code], the column will not contribute "
-"to the total ratio."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"If [code]true[/code], the label uses BBCode formatting.\n"
-"[b]Note:[/b] Trying to alter the [RichTextLabel]'s text with [method "
-"add_text] will reset this to [code]false[/code]. Use instead [method "
-"append_bbcode] to preserve BBCode formatting."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The label's text in BBCode format. Is not representative of manual "
-"modifications to the internal tag stack. Erases changes made by other "
-"methods when edited.\n"
-"[b]Note:[/b] It is unadvised to use the [code]+=[/code] operator with "
-"[code]bbcode_text[/code] (e.g. [code]bbcode_text += \"some string\"[/code]) "
-"as it replaces the whole text and can cause slowdowns. It will also erase "
-"all BBCode that was added to stack using [code]push_*[/code] methods. Use "
-"[method append_bbcode] for adding text instead, unless you absolutely need "
-"to close a tag that was opened in an earlier method call."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The currently installed custom effects. This is an array of "
-"[RichTextEffect]s.\n"
-"To add a custom effect, it's more convenient to use [method install_effect]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"If [code]true[/code], the label's height will be automatically updated to "
-"fit its content.\n"
-"[b]Note:[/b] This property is used as a workaround to fix issues with "
-"[RichTextLabel] in [Container]s, but it's unreliable in some cases and will "
-"be removed in future versions."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"If [code]true[/code], the label underlines meta tags such as [code][url]"
-"{text}[/url][/code]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "If [code]true[/code], the label uses the custom font color."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The range of characters to display, as a [float] between 0.0 and 1.0. When "
-"assigned an out of range value, it's the same as assigning 1.0.\n"
-"[b]Note:[/b] Setting this property updates [member visible_characters] based "
-"on current [method get_total_character_count]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"If [code]true[/code], the scrollbar is visible. Setting this to [code]false[/"
-"code] does not block scrolling completely. See [method scroll_to_line]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"If [code]true[/code], the window scrolls down to display new content "
-"automatically."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "If [code]true[/code], the label allows text selection."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The number of spaces associated with a single tab length. Does not affect "
-"[code]\\t[/code] in text tags, only indent tags."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The raw text of the label.\n"
-"When set, clears the tag stack and adds a raw text tag to the top of it. "
-"Does not parse BBCodes. Does not modify [member bbcode_text]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The restricted number of characters to display in the label. If [code]-1[/"
-"code], all characters will be displayed.\n"
-"[b]Note:[/b] Setting this property updates [member percent_visible] based on "
-"current [method get_total_character_count]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Triggered when the user clicks on content between meta tags. If the meta is "
-"defined in text, e.g. [code][url={\"data\"=\"hi\"}]hi[/url][/code], then the "
-"parameter for this signal will be a [String] type. If a particular type or "
-"an object is desired, the [method push_meta] method must be used to manually "
-"insert the data into the tag stack."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Triggers when the mouse exits a meta tag."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Triggers when the mouse enters a meta tag."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Makes text left aligned."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Makes text centered."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Makes text right aligned."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Makes text fill width."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Aligns top of the inline image to the top of the text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Aligns center of the inline image to the center of the text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Aligns bottom of the inline image to the baseline of the text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Aligns bottom of the inline image to the bottom of the text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Each list item has a number marker."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Each list item has a letter marker."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "Each list item has a filled circle marker."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The default text color."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"The color of selected text, used when [member selection_enabled] is "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The color of the font's shadow."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The color of the selection box."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The vertical space between lines."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid ""
-"Boolean value. If 1 ([code]true[/code]), the shadow will be displayed around "
-"the whole text as an outline."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The horizontal offset of the font's shadow."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The vertical offset of the font's shadow."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The horizontal separation of elements in a table."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The vertical separation of elements in a table."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The font used for bold text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The font used for bold italics text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The font used for italics text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The font used for monospace text."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The default text font."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The background used when the [RichTextLabel] is focused."
-msgstr ""
-
-#: doc/classes/RichTextLabel.xml
-msgid "The normal background for the [RichTextLabel]."
-msgstr ""
-
-#: doc/classes/RID.xml
-msgid "Handle for a [Resource]'s unique ID."
-msgstr ""
-
-#: doc/classes/RID.xml
-msgid ""
-"The RID type is used to access the unique integer ID of a resource. They are "
-"opaque, which means they do not grant access to the associated resource by "
-"themselves. They are used by and with the low-level Server classes such as "
-"[VisualServer]."
-msgstr ""
-
-#: doc/classes/RID.xml
-msgid ""
-"Creates a new RID instance with the ID of a given resource. When not handed "
-"a valid resource, silently stores the unused ID 0."
-msgstr ""
-
-#: doc/classes/RID.xml
-msgid "Returns the ID of the referenced resource."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Physics Body whose position is determined through physics simulation in 3D "
-"space."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"This is the node that implements full 3D physics. This means that you do not "
-"control a RigidBody directly. Instead, you can apply forces to it (gravity, "
-"impulses, etc.), and the physics simulation will calculate the resulting "
-"movement, collision, bouncing, rotating, etc.\n"
-"A RigidBody has 4 behavior [member mode]s: Rigid, Static, Character, and "
-"Kinematic.\n"
-"[b]Note:[/b] Don't change a RigidBody's position every frame or very often. "
-"Sporadic changes work fine, but physics runs at a different granularity "
-"(fixed Hz) than usual rendering (process callback) and maybe even in a "
-"separate thread, so changing this from a process loop may result in strange "
-"behavior. If you need to directly affect the body's state, use [method "
-"_integrate_forces], which allows you to directly access the physics state.\n"
-"If you need to override the default physics behavior, you can write a custom "
-"force integration function. See [member custom_integrator].\n"
-"With Bullet physics (the default), the center of mass is the RigidBody3D "
-"center. With GodotPhysics, the center of mass is the average of the "
-"[CollisionShape] centers."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Called during physics processing, allowing you to read and safely modify the "
-"simulation state for the object. By default, it works in addition to the "
-"usual physics behavior, but the [member custom_integrator] property allows "
-"you to disable the default behavior and do fully custom force integration "
-"for a body."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Adds a constant directional force (i.e. acceleration) without affecting "
-"rotation.\n"
-"This is equivalent to [code]add_force(force, Vector3(0,0,0))[/code]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Adds a constant directional force (i.e. acceleration).\n"
-"The position uses the rotation of the global coordinate system, but is "
-"centered at the object's origin."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Adds a constant rotational force (i.e. a motor) without affecting position."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Applies a directional impulse without affecting rotation.\n"
-"This is equivalent to [code]apply_impulse(Vector3(0,0,0), impulse)[/code]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Applies a positioned impulse to the body. An impulse is time independent! "
-"Applying an impulse every frame would result in a framerate-dependent force. "
-"For this reason it should only be used when simulating one-time impacts. The "
-"position uses the rotation of the global coordinate system, but is centered "
-"at the object's origin."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Applies a torque impulse which will be affected by the body mass and shape. "
-"This will rotate the body around the [code]impulse[/code] vector passed."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Returns [code]true[/code] if the specified linear or rotational axis is "
-"locked."
-msgstr ""
-
-#: doc/classes/RigidBody.xml doc/classes/RigidBody2D.xml
-msgid ""
-"Returns a list of the bodies colliding with this one. Requires [member "
-"contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions.\n"
-"[b]Note:[/b] The result of this test is not immediate after moving objects. "
-"For performance, list of collisions is updated once per frame and before the "
-"physics step. Consider using signals instead."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Returns the inverse inertia tensor basis. This is used to calculate the "
-"angular acceleration resulting from a torque applied to the RigidBody."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "Locks the specified linear or rotational axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-#, fuzzy
-msgid ""
-"Damps the body's rotational forces. If this value is different from -1.0 it "
-"will be added to any angular damp derived from the world or areas.\n"
-"See [member ProjectSettings.physics/3d/default_angular_damp] for more "
-"details about damping."
-msgstr ""
-"Die Rate, mit der Objekte in diesem Bereich aufhören, sich zu drehen. Stellt "
-"den Winkelgeschwindigkeitsverlust pro Sekunde dar. Die Werte reichen von "
-"[code]0[/code] (keine Dämpfung) bis [code]1[/code] (volle Dämpfung)."
-
-#: doc/classes/RigidBody.xml
-msgid "Lock the body's rotation in the X axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "Lock the body's rotation in the Y axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "Lock the body's rotation in the Z axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "Lock the body's movement in the X axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "Lock the body's movement in the Y axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "Lock the body's movement in the Z axis."
-msgstr ""
-
-#: doc/classes/RigidBody.xml doc/classes/RigidBody2D.xml
-#: doc/classes/StaticBody.xml doc/classes/StaticBody2D.xml
-msgid ""
-"The body's bounciness. Values range from [code]0[/code] (no bounce) to "
-"[code]1[/code] (full bounciness).\n"
-"Deprecated, use [member PhysicsMaterial.bounce] instead via [member "
-"physics_material_override]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"If [code]true[/code], the body can enter sleep mode when there is no "
-"movement. See [member sleeping].\n"
-"[b]Note:[/b] A RigidBody3D will never enter sleep mode automatically if its "
-"[member mode] is [constant MODE_CHARACTER]. It can still be put to sleep "
-"manually by setting its [member sleeping] property to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the RigidBody will emit signals when it collides with "
-"another RigidBody. See also [member contacts_reported]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"The maximum number of contacts that will be recorded. Requires [member "
-"contact_monitor] to be set to [code]true[/code].\n"
-"[b]Note:[/b] The number of contacts is different from the number of "
-"collisions. Collisions between parallel edges will result in two contacts "
-"(one at each end), and collisions between parallel faces will result in four "
-"contacts (one at each corner)."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"If [code]true[/code], continuous collision detection is used.\n"
-"Continuous collision detection tries to predict where a moving body will "
-"collide, instead of moving it and correcting its movement if it collided. "
-"Continuous collision detection is more precise, and misses fewer impacts by "
-"small, fast-moving objects. Not using continuous collision detection is "
-"faster to compute, but can miss small, fast-moving objects."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"If [code]true[/code], internal force integration will be disabled (like "
-"gravity or air friction) for this body. Other than collision response, the "
-"body will only move as determined by the [method _integrate_forces] "
-"function, if defined."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"The body's friction, from 0 (frictionless) to 1 (max friction).\n"
-"Deprecated, use [member PhysicsMaterial.friction] instead via [member "
-"physics_material_override]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"This is multiplied by the global 3D gravity setting found in [b]Project > "
-"Project Settings > Physics > 3d[/b] to produce RigidBody's gravity. For "
-"example, a value of 1 will be normal gravity, 2 will apply double gravity, "
-"and 0.5 will apply half gravity to this object."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-#, fuzzy
-msgid ""
-"The body's linear damp. Cannot be less than -1.0. If this value is different "
-"from -1.0 it will be added to any linear damp derived from the world or "
-"areas.\n"
-"See [member ProjectSettings.physics/3d/default_linear_damp] for more details "
-"about damping."
-msgstr ""
-"Die Rate, mit der sich Objekte in diesem Bereich nicht mehr bewegen. Stellt "
-"den linearen Geschwindigkeitsverlust pro Sekunde dar. Die Werte reichen von "
-"[code]0[/code] (keine Dämpfung) bis [code]1[/code] (volle Dämpfung)."
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"The body's linear velocity in units per second. Can be used sporadically, "
-"but [b]don't set this every frame[/b], because physics may run in another "
-"thread and runs at a different granularity. Use [method _integrate_forces] "
-"as your process loop for precise control of the body state."
-msgstr ""
-
-#: doc/classes/RigidBody.xml doc/classes/RigidBody2D.xml
-msgid "The body's mass."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid "The body mode. See [enum Mode] for possible values."
-msgstr ""
-
-#: doc/classes/RigidBody.xml doc/classes/RigidBody2D.xml
-#: doc/classes/StaticBody.xml doc/classes/StaticBody2D.xml
-msgid ""
-"The physics material override for the body.\n"
-"If a material is assigned to this property, it will be used instead of any "
-"other physics material, such as an inherited one."
-msgstr ""
-
-#: doc/classes/RigidBody.xml doc/classes/RigidBody2D.xml
-msgid ""
-"If [code]true[/code], the body will not move and will not calculate forces "
-"until woken up by another body through, for example, a collision, or by "
-"using the [method apply_impulse] or [method add_force] methods."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"The body's weight based on its mass and the global 3D gravity. Global values "
-"are set in [b]Project > Project Settings > Physics > 3d[/b]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Emitted when a collision with another [PhysicsBody] or [GridMap] occurs. "
-"Requires [member contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions. "
-"[GridMap]s are detected if the [MeshLibrary] has Collision [Shape]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody] or [GridMap]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Emitted when the collision with another [PhysicsBody] or [GridMap] ends. "
-"Requires [member contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions. "
-"[GridMap]s are detected if the [MeshLibrary] has Collision [Shape]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody] or [GridMap]."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Emitted when one of this RigidBody's [Shape]s collides with another "
-"[PhysicsBody] or [GridMap]'s [Shape]s. Requires [member contact_monitor] to "
-"be set to [code]true[/code] and [member contacts_reported] to be set high "
-"enough to detect all the collisions. [GridMap]s are detected if the "
-"[MeshLibrary] has Collision [Shape]s.\n"
-"[code]body_rid[/code] the [RID] of the other [PhysicsBody] or "
-"[MeshLibrary]'s [CollisionObject] used by the [PhysicsServer].\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody] or [GridMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape] of the other "
-"[PhysicsBody] or [GridMap] used by the [PhysicsServer]. Get the "
-"[CollisionShape] node with [code]body.shape_owner_get_owner(body_shape_index)"
-"[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape] of this RigidBody "
-"used by the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
-"shape_owner_get_owner(local_shape_index)[/code].\n"
-"[b]Note:[/b] Bullet physics cannot identify the shape index when using a "
-"[ConcavePolygonShape]. Don't use multiple [CollisionShape]s when using a "
-"[ConcavePolygonShape] with Bullet physics if you need shape indices."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Emitted when the collision between one of this RigidBody's [Shape]s and "
-"another [PhysicsBody] or [GridMap]'s [Shape]s ends. Requires [member "
-"contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions. "
-"[GridMap]s are detected if the [MeshLibrary] has Collision [Shape]s.\n"
-"[code]body_rid[/code] the [RID] of the other [PhysicsBody] or "
-"[MeshLibrary]'s [CollisionObject] used by the [PhysicsServer]. [GridMap]s "
-"are detected if the Meshes have [Shape]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody] or [GridMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape] of the other "
-"[PhysicsBody] or [GridMap] used by the [PhysicsServer]. Get the "
-"[CollisionShape] node with [code]body.shape_owner_get_owner(body_shape_index)"
-"[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape] of this RigidBody "
-"used by the [PhysicsServer]. Get the [CollisionShape] node with [code]self."
-"shape_owner_get_owner(local_shape_index)[/code].\n"
-"[b]Note:[/b] Bullet physics cannot identify the shape index when using a "
-"[ConcavePolygonShape]. Don't use multiple [CollisionShape]s when using a "
-"[ConcavePolygonShape] with Bullet physics if you need shape indices."
-msgstr ""
-
-#: doc/classes/RigidBody.xml doc/classes/RigidBody2D.xml
-msgid ""
-"Emitted when the physics engine changes the body's sleeping state.\n"
-"[b]Note:[/b] Changing the value [member sleeping] will not trigger this "
-"signal. It is only emitted if the sleeping state is changed by the physics "
-"engine or [code]emit_signal(\"sleeping_state_changed\")[/code] is used."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Rigid body mode. This is the \"natural\" state of a rigid body. It is "
-"affected by forces, and can move, rotate, and be affected by user code."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Static mode. The body behaves like a [StaticBody], and can only move by user "
-"code."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Character body mode. This behaves like a rigid body, but can not rotate."
-msgstr ""
-
-#: doc/classes/RigidBody.xml
-msgid ""
-"Kinematic body mode. The body behaves like a [KinematicBody], and can only "
-"move by user code."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid "A body that is controlled by the 2D physics engine."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"This node implements simulated 2D physics. You do not control a RigidBody2D "
-"directly. Instead, you apply forces to it (gravity, impulses, etc.) and the "
-"physics simulation calculates the resulting movement based on its mass, "
-"friction, and other physical properties.\n"
-"A RigidBody2D has 4 behavior [member mode]s: Rigid, Static, Character, and "
-"Kinematic.\n"
-"[b]Note:[/b] You should not change a RigidBody2D's [code]position[/code] or "
-"[code]linear_velocity[/code] every frame or even very often. If you need to "
-"directly affect the body's state, use [method _integrate_forces], which "
-"allows you to directly access the physics state.\n"
-"Please also keep in mind that physics bodies manage their own transform "
-"which overwrites the ones you set. So any direct or indirect transformation "
-"(including scaling of the node or its parent) will be visible in the editor "
-"only, and immediately reset at runtime.\n"
-"If you need to override the default physics behavior or add a transformation "
-"at runtime, you can write a custom force integration. See [member "
-"custom_integrator].\n"
-"The center of mass is always located at the node's origin without taking "
-"into account the [CollisionShape2D] centroid offsets."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid "2D Physics Platformer Demo"
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml doc/classes/Sprite.xml
-msgid "Instancing Demo"
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Allows you to read and safely modify the simulation state for the object. "
-"Use this instead of [method Node._physics_process] if you need to directly "
-"change the body's [code]position[/code] or other physics properties. By "
-"default, it works in addition to the usual physics behavior, but [member "
-"custom_integrator] allows you to disable the default behavior and write "
-"custom force integration for a body."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Applies a positioned impulse to the body. An impulse is time-independent! "
-"Applying an impulse every frame would result in a framerate-dependent force. "
-"For this reason it should only be used when simulating one-time impacts (use "
-"the \"_force\" functions otherwise). The position uses the rotation of the "
-"global coordinate system, but is centered at the object's origin."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Sets the body's velocity on the given axis. The velocity in the given vector "
-"axis will be set as the given vector length. This is useful for jumping "
-"behavior."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Returns [code]true[/code] if a collision would result from moving in the "
-"given vector. [code]margin[/code] increases the size of the shapes involved "
-"in the collision detection, and [code]result[/code] is an object of type "
-"[Physics2DTestMotionResult], which contains additional information about the "
-"collision (should there be one)."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Damps the body's [member angular_velocity]. If [code]-1[/code], the body "
-"will use the [b]Default Angular Damp[/b] defined in [b]Project > Project "
-"Settings > Physics > 2d[/b]. If greater than [code]-1[/code] it will be "
-"added to the default project value.\n"
-"See [member ProjectSettings.physics/2d/default_angular_damp] for more "
-"details about damping."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid "The body's total applied force."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid "The body's total applied torque."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"If [code]true[/code], the body can enter sleep mode when there is no "
-"movement. See [member sleeping].\n"
-"[b]Note:[/b] A RigidBody2D will never enter sleep mode automatically if its "
-"[member mode] is [constant MODE_CHARACTER]. It can still be put to sleep "
-"manually by setting its [member sleeping] property to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"If [code]true[/code], the body will emit signals when it collides with "
-"another RigidBody2D. See also [member contacts_reported]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"The maximum number of contacts that will be recorded. Requires [member "
-"contact_monitor] to be set to [code]true[/code].\n"
-"[b]Note:[/b] The number of contacts is different from the number of "
-"collisions. Collisions between parallel edges will result in two contacts "
-"(one at each end)."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Continuous collision detection mode.\n"
-"Continuous collision detection tries to predict where a moving body will "
-"collide instead of moving it and correcting its movement after collision. "
-"Continuous collision detection is slower, but more precise and misses fewer "
-"collisions with small, fast-moving objects. Raycasting and shapecasting "
-"methods are available. See [enum CCDMode] for details."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"If [code]true[/code], internal force integration is disabled for this body. "
-"Aside from collision response, the body will only move as determined by the "
-"[method _integrate_forces] function."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"The body's friction. Values range from [code]0[/code] (frictionless) to "
-"[code]1[/code] (maximum friction).\n"
-"Deprecated, use [member PhysicsMaterial.friction] instead via [member "
-"physics_material_override]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Multiplies the gravity applied to the body. The body's gravity is calculated "
-"from the [b]Default Gravity[/b] value in [b]Project > Project Settings > "
-"Physics > 2d[/b] and/or any additional gravity vector applied by [Area2D]s."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"The body's moment of inertia. This is like mass, but for rotation: it "
-"determines how much torque it takes to rotate the body. The moment of "
-"inertia is usually computed automatically from the mass and the shapes, but "
-"this function allows you to set a custom value. Set 0 inertia to return to "
-"automatically computing it."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Damps the body's [member linear_velocity]. If [code]-1[/code], the body will "
-"use the [b]Default Linear Damp[/b] in [b]Project > Project Settings > "
-"Physics > 2d[/b]. If greater than [code]-1[/code] it will be added to the "
-"default project value.\n"
-"See [member ProjectSettings.physics/2d/default_linear_damp] for more details "
-"about damping."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"The body's linear velocity in pixels per second. Can be used sporadically, "
-"but [b]don't set this every frame[/b], because physics may run in another "
-"thread and runs at a different granularity. Use [method _integrate_forces] "
-"as your process loop for precise control of the body state."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid "The body's mode. See [enum Mode] for possible values."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"The body's weight based on its mass and the [b]Default Gravity[/b] value in "
-"[b]Project > Project Settings > Physics > 2d[/b]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Emitted when a collision with another [PhysicsBody2D] or [TileMap] occurs. "
-"Requires [member contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions. "
-"[TileMap]s are detected if the [TileSet] has Collision [Shape2D]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody2D] or [TileMap]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Emitted when the collision with another [PhysicsBody2D] or [TileMap] ends. "
-"Requires [member contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions. "
-"[TileMap]s are detected if the [TileSet] has Collision [Shape2D]s.\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody2D] or [TileMap]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Emitted when one of this RigidBody2D's [Shape2D]s collides with another "
-"[PhysicsBody2D] or [TileMap]'s [Shape2D]s. Requires [member contact_monitor] "
-"to be set to [code]true[/code] and [member contacts_reported] to be set high "
-"enough to detect all the collisions. [TileMap]s are detected if the "
-"[TileSet] has Collision [Shape2D]s.\n"
-"[code]body_rid[/code] the [RID] of the other [PhysicsBody2D] or [TileSet]'s "
-"[CollisionObject2D] used by the [Physics2DServer].\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody2D] or [TileMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape2D] of the other "
-"[PhysicsBody2D] or [TileMap] used by the [Physics2DServer]. Get the "
-"[CollisionShape2D] node with [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape2D] of this "
-"RigidBody2D used by the [Physics2DServer]. Get the [CollisionShape2D] node "
-"with [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Emitted when the collision between one of this RigidBody2D's [Shape2D]s and "
-"another [PhysicsBody2D] or [TileMap]'s [Shape2D]s ends. Requires [member "
-"contact_monitor] to be set to [code]true[/code] and [member "
-"contacts_reported] to be set high enough to detect all the collisions. "
-"[TileMap]s are detected if the [TileSet] has Collision [Shape2D]s.\n"
-"[code]body_rid[/code] the [RID] of the other [PhysicsBody2D] or [TileSet]'s "
-"[CollisionObject2D] used by the [Physics2DServer].\n"
-"[code]body[/code] the [Node], if it exists in the tree, of the other "
-"[PhysicsBody2D] or [TileMap].\n"
-"[code]body_shape_index[/code] the index of the [Shape2D] of the other "
-"[PhysicsBody2D] or [TileMap] used by the [Physics2DServer]. Get the "
-"[CollisionShape2D] node with [code]body."
-"shape_owner_get_owner(body_shape_index)[/code].\n"
-"[code]local_shape_index[/code] the index of the [Shape2D] of this "
-"RigidBody2D used by the [Physics2DServer]. Get the [CollisionShape2D] node "
-"with [code]self.shape_owner_get_owner(local_shape_index)[/code]."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Rigid mode. The body behaves as a physical object. It collides with other "
-"bodies and responds to forces applied to it. This is the default mode."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid "Static mode. The body behaves like a [StaticBody2D] and does not move."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Character mode. Similar to [constant MODE_RIGID], but the body can not "
-"rotate."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Kinematic mode. The body behaves like a [KinematicBody2D], and must be moved "
-"by code."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Continuous collision detection disabled. This is the fastest way to detect "
-"body collisions, but can miss small, fast-moving objects."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Continuous collision detection enabled using raycasting. This is faster than "
-"shapecasting but less precise."
-msgstr ""
-
-#: doc/classes/RigidBody2D.xml
-msgid ""
-"Continuous collision detection enabled using shapecasting. This is the "
-"slowest CCD method and the most precise."
-msgstr ""
-
-#: doc/classes/Room.xml
-msgid "Room node, used to group objects together locally for [Portal] culling."
-msgstr ""
-
-#: doc/classes/Room.xml
-msgid ""
-"The [Portal] culling system requires levels to be built using objects "
-"grouped together by location in areas called [Room]s. In many cases these "
-"will correspond to actual rooms in buildings, but not necessarily (a canyon "
-"area may be treated as a room).\n"
-"Any [VisualInstance] that is a child or grandchild of a [Room] will be "
-"assigned to that room, if the [code]portal_mode[/code] of that "
-"[VisualInstance] is set to [code]STATIC[/code] (does not move) or "
-"[code]DYNAMIC[/code] (moves only within the room).\n"
-"Internally the room boundary must form a [b]convex hull[/b], and by default "
-"this is determined automatically by the geometry of the objects you place "
-"within the room.\n"
-"You can alternatively precisely specify a [b]manual bound[/b]. If you place "
-"a [MeshInstance] with a name prefixed by [code]Bound_[/code], it will turn "
-"off the bound generation from geometry, and instead use the vertices of this "
-"MeshInstance to directly calculate a convex hull during the conversion stage "
-"(see [RoomManager]).\n"
-"In order to see from one room into an adjacent room, [Portal]s must be "
-"placed over non-occluded openings between rooms. These will often be placed "
-"over doors and windows."
-msgstr ""
-
-#: doc/classes/Room.xml
-msgid ""
-"If [code]points[/code] are set, the [Room] bounding convex hull will be "
-"built from these points. If no points are set, the room bound will either be "
-"derived from a manual bound ([MeshInstance] with name prefix [code]Bound_[/"
-"code]), or from the geometry within the room.\n"
-"Note that you can use the [code]Generate Points[/code] editor button to get "
-"started. This will use either the geometry or manual bound to generate the "
-"room hull, and save the resulting points, allowing you to edit them to "
-"further refine the bound."
-msgstr ""
-
-#: doc/classes/Room.xml
-msgid ""
-"The [code]simplify[/code] value determines to what degree room hulls "
-"(bounds) are simplified, by removing similar planes. A value of 0 gives no "
-"simplification, 1 gives maximum simplification."
-msgstr ""
-
-#: doc/classes/Room.xml
-msgid ""
-"The room hull simplification can either use the default value set in the "
-"[RoomManager], or override this and use the per room setting."
-msgstr ""
-
-#: doc/classes/RoomGroup.xml
-msgid "Groups [Room]s together to allow common functionality."
-msgstr ""
-
-#: doc/classes/RoomGroup.xml
-msgid ""
-"Although [Room] behavior can be specified individually, sometimes it is "
-"faster and more convenient to write functionality for a group of rooms.\n"
-"[RoomGroup]s should be placed as children of the [b]room list[/b] (the "
-"parent [Node] of your [Room]s), and [Room]s should be placed in turn as "
-"children of a [RoomGroup] in order to assign them to the RoomGroup.\n"
-"A [RoomGroup] can for example be used to specify [Room]s that are "
-"[b]outside[/b], and switch on or off a directional light, sky, or rain "
-"effect as the player enters / exits the area.\n"
-"[RoomGroup]s receive [b]gameplay callbacks[/b] when the "
-"[code]gameplay_monitor[/code] is switched on, as [code]signal[/code]s or "
-"[code]notification[/code]s as they enter and exit the [b]gameplay area[/b] "
-"(see [RoomManager] for details)."
-msgstr ""
-
-#: doc/classes/RoomGroup.xml
-msgid ""
-"This priority will be applied to [Room]s within the group. The [Room] "
-"priority allows the use of [b]internal rooms[/b], rooms [i]within[/i] "
-"another room or rooms.\n"
-"When the [Camera] is within more than one room (regular and internal), the "
-"higher priority room will take precedence. So with for example, a house "
-"inside a terrain 'room', you would make the house higher priority, so that "
-"when the camera is within the house, the house is used as the source room, "
-"but outside the house, the terrain room would be used instead."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid "The RoomManager node is used to control the portal culling system."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"In order to utilize the portal occlusion culling system, you must build your "
-"level using [Room]s and [Portal]s. Before these can be used at runtime, they "
-"must undergo a short conversion process to build the [code]room graph[/"
-"code], runtime data needed for portal culling. The [code]room graph[/code] "
-"is controlled by the [RoomManager] node, and the [RoomManager] also contains "
-"settings that are common throughout the portal system."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"This function clears all converted data from the [b]room graph[/b]. Use this "
-"before unloading a level, when transitioning from level to level, or "
-"returning to a main menu."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"This is the most important function in the whole portal culling system. "
-"Without it, the system cannot function.\n"
-"First it goes through every [Room] that is a child of the [code]room list[/"
-"code] node (and [RoomGroup]s within) and converts and adds it to the "
-"[code]room graph[/code].\n"
-"This works for both [Room] nodes, and [Spatial] nodes that follow a special "
-"naming convention. They should begin with the prefix [i]'Room_'[/i], "
-"followed by the name you wish to give the room, e.g. [i]'Room_lounge'[/i]. "
-"This will automatically convert such [Spatial]s to [Room] nodes for you. "
-"This is useful if you want to build you entire room system in e.g. Blender, "
-"and reimport multiple times as you work on the level.\n"
-"The conversion will try to assign [VisualInstance]s that are children and "
-"grandchildren of the [Room] to the room. These should be given a suitable "
-"[code]portal mode[/code] (see the [CullInstance] documentation). The default "
-"[code]portal mode[/code] is [code]STATIC[/code] - objects which are not "
-"expected to move while the level is played, which will typically be most "
-"objects.\n"
-"The conversion will usually use the geometry of these [VisualInstance]s (and "
-"the [Portal]s) to calculate a convex hull bound for the room. These bounds "
-"will be shown in the editor with a wireframe. Alternatively you can specify "
-"a manual custom bound for any room, see the [Room] documentation.\n"
-"By definition, [Camera]s within a room can see everything else within the "
-"room (that is one advantage to using convex hulls). However, in order to see "
-"from one room into adjacent rooms, you must place [Portal]s, which represent "
-"openings that the camera can see through, like windows and doors.\n"
-"[Portal]s are really just specialized [MeshInstance]s. In fact you will "
-"usually first create a portal by creating a [MeshInstance], especially a "
-"[code]plane[/code] mesh instance. You would move the plane in the editor to "
-"cover a window or doorway, with the front face pointing outward from the "
-"room. To let the conversion process know you want this mesh to be a portal, "
-"again we use a special naming convention. [MeshInstance]s to be converted to "
-"a [Portal] should start with the prefix [i]'Portal_'[/i].\n"
-"You now have a choice - you can leave the name as [i]'Portal_'[/i] and allow "
-"the system to automatically detect the nearest [Room] to link. In most cases "
-"this will work fine.\n"
-"An alternative method is to specify the [Room] to link to manually, "
-"appending a suffix to the portal name, which should be the name of the room "
-"you intend to link to. For example [i]'Portal_lounge'[/i] will attempt to "
-"link to the room named [i]'Room_lounge'[/i].\n"
-"There is a special case here - Godot does not allow two nodes to share the "
-"same name. What if you want to manually have more than one portal leading "
-"into the same room? Surely they will need to both be called, e.g. "
-"[i]'Portal_lounge'[/i]?\n"
-"The solution is a wildcard character. After the room name, if you use the "
-"character [i]'*'[/i], this character and anything following it will be "
-"ignored. So you can use for example [i]'Portal_lounge*0'[/i], "
-"[i]'Portal_lounge*1'[/i] etc.\n"
-"Note that [Portal]s that have already been converted to [Portal] nodes "
-"(rather than [MeshInstance]s) still need to follow the same naming "
-"convention, as they will be relinked each time during conversion.\n"
-"It is recommended that you only place objects in rooms that are desired to "
-"stay within those rooms - i.e. [code]portal mode[/code]s [code]STATIC[/code] "
-"or [code]DYNAMIC[/code] (not crossing portals). [code]GLOBAL[/code] and "
-"[code]ROAMING[/code] objects are best placed in another part of the scene "
-"tree, to avoid confusion. See [CullInstance] for a full description of "
-"portal modes."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Switches the portal culling system on and off.\n"
-"It is important to note that when portal culling is active, it is "
-"responsible for [b]all[/b] the 3d culling. Some editor visual debugging "
-"helpers may not be available when active, so switching the active flag is "
-"intended to be used to ensure your [Room] / [Portal] layout works within the "
-"editor.\n"
-"Switching to [code]active[/code] will have no effect when the [code]room "
-"graph[/code] is unloaded (the rooms have not yet been converted).\n"
-"[b]Note:[/b] For efficiency, the portal system is designed to work with only "
-"the core visual object types. In particular, only nodes derived from "
-"[VisualInstance] are expected to show when the system is active."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Large objects can 'sprawl' over (be present in) more than one room. It can "
-"be useful to visualize which objects are sprawling outside the current "
-"room.\n"
-"Toggling this setting turns this debug view on and off."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Usually we don't want objects that only [b]just[/b] cross a boundary into an "
-"adjacent [Room] to sprawl into that room. To prevent this, each [Portal] has "
-"an extra margin, or tolerance zone where objects can enter without sprawling "
-"to a neighbouring room.\n"
-"In most cases you can set this here for all portals. It is possible to "
-"override the margin for each portal."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"When using a partial or full PVS, the gameplay monitor allows you to receive "
-"callbacks when roaming objects or rooms enter or exit the [b]gameplay area[/"
-"b]. The gameplay area is defined as either the primary, or secondary PVS.\n"
-"These callbacks allow you to, for example, reduce processing for objects "
-"that are far from the player, or turn on and off AI.\n"
-"You can either choose to receive callbacks as notifications through the "
-"[code]_notification[/code] function, or as signals.\n"
-"[code]NOTIFICATION_ENTER_GAMEPLAY[/code]\n"
-"[code]NOTIFICATION_EXIT_GAMEPLAY[/code]\n"
-"Signals: [code]\"gameplay_entered\"[/code], [code]\"gameplay_exited\"[/code]"
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"If enabled, the system will attempt to merge similar meshes (particularly in "
-"terms of materials) within [Room]s during conversion. This can significantly "
-"reduce the number of drawcalls and state changes required during rendering, "
-"albeit at a cost of reduced culling granularity.\n"
-"[b]Note:[/b] This operates at runtime during the conversion process, and "
-"will only operate on exported or running projects, in order to prevent "
-"accidental alteration to the scene and loss of data."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"When converting rooms, the editor will warn you if overlap is detected "
-"between rooms. Overlap can interfere with determining the room that cameras "
-"and objects are within. A small amount can be acceptable, depending on your "
-"level. Here you can alter the threshold at which the editor warning appears. "
-"There are no other side effects."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Portal rendering is recursive - each time a portal is seen through an "
-"earlier portal there is some cost. For this reason, and to prevent the "
-"possibility of infinite loops, this setting provides a hard limit on the "
-"recursion depth.\n"
-"[b]Note:[/b] This value is unused when using [code]Full[/code] PVS mode."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Portal culling normally operates using the current [Camera] / [Camera]s, "
-"however for debugging purposes within the editor, you can use this setting "
-"to override this behavior and force it to use a particular camera to get a "
-"better idea of what the occlusion culling is doing."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Optionally during conversion the potentially visible set (PVS) of rooms that "
-"are potentially visible from each room can be calculated. This can be used "
-"either to aid in dynamic portal culling, or to totally replace portal "
-"culling.\n"
-"In [code]Full[/code] PVS Mode, all objects within the potentially visible "
-"rooms will be frustum culled, and rendered if they are within the view "
-"frustum."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"In order to reduce processing for roaming objects, an expansion is applied "
-"to their AABB as they move. This expanded volume is used to calculate which "
-"rooms the roaming object is within. If the object's exact AABB is still "
-"within this expanded volume on the next move, there is no need to reprocess "
-"the object, which can save considerable CPU.\n"
-"The downside is that if the expansion is too much, the object may end up "
-"unexpectedly sprawling into neighbouring rooms and showing up where it might "
-"otherwise be culled.\n"
-"In order to balance roaming performance against culling accuracy, this "
-"expansion margin can be customized by the user. It will typically depend on "
-"your room and object sizes, and movement speeds. The default value should "
-"work reasonably in most circumstances."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"During the conversion process, the geometry of objects within [Room]s, or a "
-"custom specified manual bound, are used to generate a [b]convex hull bound[/"
-"b].\n"
-"This convex hull is [b]required[/b] in the visibility system, and is used "
-"for many purposes. Most importantly, it is used to decide whether the "
-"[Camera] (or an object) is within a [Room]. The convex hull generating "
-"algorithm is good, but occasionally it can create too many (or too few) "
-"planes to give a good representation of the room volume.\n"
-"The [code]room_simplify[/code] value can be used to gain fine control over "
-"this process. It determines how similar planes can be for them to be "
-"considered the same (and duplicates removed). The value can be set between 0 "
-"(no simplification) and 1 (maximum simplification).\n"
-"The value set here is the default for all rooms, but individual rooms can "
-"override this value if desired.\n"
-"The room convex hulls are shown as a wireframe in the editor."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"For the [Room] conversion process to succeed, you must point the "
-"[RoomManager] to the parent [Node] of your [Room]s and [RoomGroup]s, which "
-"we refer to as the [code]roomlist[/code] (the roomlist is not a special node "
-"type, it is normally just a [Spatial])."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid "Shows the [Portal] margins when the portal gizmo is used in the editor."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"When receiving gameplay callbacks when objects enter and exit gameplay, the "
-"[b]gameplay area[/b] can be defined by either the primary PVS (potentially "
-"visible set) of [Room]s, or the secondary PVS (the primary PVS and their "
-"neighbouring [Room]s).\n"
-"Sometimes using the larger gameplay area of the secondary PVS may be "
-"preferable."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Use only [Portal]s at runtime to determine visibility. PVS will not be "
-"generated at [Room]s conversion, and gameplay notifications cannot be used."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Use a combination of PVS and [Portal]s to determine visibility (this is "
-"usually fastest and most accurate)."
-msgstr ""
-
-#: doc/classes/RoomManager.xml
-msgid ""
-"Use only the PVS (potentially visible set) of [Room]s to determine "
-"visibility."
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-msgid "Editor-only helper for setting up root motion in [AnimationTree]."
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-msgid ""
-"[i]Root motion[/i] refers to an animation technique where a mesh's skeleton "
-"is used to give impulse to a character. When working with 3D animations, a "
-"popular technique is for animators to use the root skeleton bone to give "
-"motion to the rest of the skeleton. This allows animating characters in a "
-"way where steps actually match the floor below. It also allows precise "
-"interaction with objects during cinematics. See also [AnimationTree].\n"
-"[b]Note:[/b] [RootMotionView] is only visible in the editor. It will be "
-"hidden automatically in the running project, and will also be converted to a "
-"plain [Node] in the running project. This means a script attached to a "
-"[RootMotionView] node [i]must[/i] have [code]extends Node[/code] instead of "
-"[code]extends RootMotionView[/code]. Additionally, it must not be a "
-"[code]tool[/code] script."
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-msgid "Using AnimationTree - Root motion"
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-msgid "Path to an [AnimationTree] node to use as a basis for root motion."
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-msgid "The grid's cell size in 3D units."
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-#, fuzzy
-msgid "The grid's color."
-msgstr "Beige Farbe."
-
-#: doc/classes/RootMotionView.xml
-msgid ""
-"The grid's radius in 3D units. The grid's opacity will fade gradually as the "
-"distance from the origin increases until this [member radius] is reached."
-msgstr ""
-
-#: doc/classes/RootMotionView.xml
-msgid ""
-"If [code]true[/code], the grid's points will all be on the same Y coordinate "
-"([i]local[/i] Y = 0). If [code]false[/code], the points' original Y "
-"coordinate is preserved."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid "A script interface to a scene file's data."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Maintains a list of resources, nodes, exported, and overridden properties, "
-"and built-in scripts associated with a scene.\n"
-"This class cannot be instantiated directly, it is retrieved for a given "
-"scene as the result of [method PackedScene.get_state]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the list of bound parameters for the signal at [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the number of signal connections in the scene.\n"
-"The [code]idx[/code] argument used to query connection metadata in other "
-"[code]get_connection_*[/code] methods in the interval [code][0, "
-"get_connection_count() - 1][/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the connection flags for the signal at [code]idx[/code]. See [enum "
-"Object.ConnectFlags] constants."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid "Returns the method connected to the signal at [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid "Returns the name of the signal at [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the path to the node that owns the signal at [code]idx[/code], "
-"relative to the root node."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the path to the node that owns the method connected to the signal at "
-"[code]idx[/code], relative to the root node."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the number of nodes in the scene.\n"
-"The [code]idx[/code] argument used to query node data in other "
-"[code]get_node_*[/code] methods in the interval [code][0, get_node_count() - "
-"1][/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the list of group names associated with the node at [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the node's index, which is its position relative to its siblings. "
-"This is only relevant and saved in scenes for cases where new nodes are "
-"added to an instanced or inherited scene among siblings from the base scene. "
-"Despite the name, this index is not related to the [code]idx[/code] argument "
-"used here and in other methods."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns a [PackedScene] for the node at [code]idx[/code] (i.e. the whole "
-"branch starting at this node, with its child nodes and resources), or "
-"[code]null[/code] if the node is not an instance."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the path to the represented scene file if the node at [code]idx[/"
-"code] is an [InstancePlaceholder]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid "Returns the name of the node at [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the path to the owner of the node at [code]idx[/code], relative to "
-"the root node."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the path to the node at [code]idx[/code].\n"
-"If [code]for_parent[/code] is [code]true[/code], returns the path of the "
-"[code]idx[/code] node's parent instead."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the number of exported or overridden properties for the node at "
-"[code]idx[/code].\n"
-"The [code]prop_idx[/code] argument used to query node property data in other "
-"[code]get_node_property_*[/code] methods in the interval [code][0, "
-"get_node_property_count() - 1][/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the name of the property at [code]prop_idx[/code] for the node at "
-"[code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns the value of the property at [code]prop_idx[/code] for the node at "
-"[code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid "Returns the type of the node at [code]idx[/code]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"Returns [code]true[/code] if the node at [code]idx[/code] is an "
-"[InstancePlaceholder]."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"If passed to [method PackedScene.instance], blocks edits to the scene state."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"If passed to [method PackedScene.instance], provides inherited scene "
-"resources to the local scene.\n"
-"[b]Note:[/b] Only available in editor builds."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"If passed to [method PackedScene.instance], provides local scene resources "
-"to the local scene. Only the main scene should receive the main edit state.\n"
-"[b]Note:[/b] Only available in editor builds."
-msgstr ""
-
-#: doc/classes/SceneState.xml
-msgid ""
-"If passed to [method PackedScene.instance], it's similar to [constant "
-"GEN_EDIT_STATE_MAIN], but for the case where the scene is being instantiated "
-"to be the base of another one.\n"
-"[b]Note:[/b] Only available in editor builds."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Manages the game loop via a hierarchy of nodes."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"As one of the most important classes, the [SceneTree] manages the hierarchy "
-"of nodes in a scene as well as scenes themselves. Nodes can be added, "
-"retrieved and removed. The whole scene tree (and thus the current scene) can "
-"be paused. Scenes can be loaded, switched and reloaded.\n"
-"You can also use the [SceneTree] to organize your nodes into groups: every "
-"node can be assigned as many groups as you want to create, e.g. an \"enemy\" "
-"group. You can then iterate these groups or even call methods and set "
-"properties on all the group's members at once.\n"
-"[SceneTree] is the default [MainLoop] implementation used by scenes, and is "
-"thus in charge of the game loop."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Calls [code]method[/code] on each member of the given group. You can pass "
-"arguments to [code]method[/code] by specifying them at the end of the method "
-"call. This method is equivalent of calling [method call_group_flags] with "
-"[constant GROUP_CALL_DEFAULT] flag.\n"
-"[b]Note:[/b] [code]method[/code] may only have 5 arguments at most (7 "
-"arguments passed to this method in total).\n"
-"[b]Note:[/b] Due to design limitations, [method call_group] will fail "
-"silently if one of the arguments is [code]null[/code].\n"
-"[b]Note:[/b] [method call_group] will always call methods with an one-frame "
-"delay, in a way similar to [method Object.call_deferred]. To call methods "
-"immediately, use [method call_group_flags] with the [constant "
-"GROUP_CALL_REALTIME] flag."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Calls [code]method[/code] on each member of the given group, respecting the "
-"given [enum GroupCallFlags]. You can pass arguments to [code]method[/code] "
-"by specifying them at the end of the method call.\n"
-"[b]Note:[/b] [code]method[/code] may only have 5 arguments at most (8 "
-"arguments passed to this method in total).\n"
-"[b]Note:[/b] Due to design limitations, [method call_group_flags] will fail "
-"silently if one of the arguments is [code]null[/code].\n"
-"[codeblock]\n"
-"# Call the method immediately and in reverse order.\n"
-"get_tree().call_group_flags(SceneTree.GROUP_CALL_REALTIME | SceneTree."
-"GROUP_CALL_REVERSE, \"bases\", \"destroy\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Changes the running scene to the one at the given [code]path[/code], after "
-"loading it into a [PackedScene] and creating a new instance.\n"
-"Returns [constant OK] on success, [constant ERR_CANT_OPEN] if the "
-"[code]path[/code] cannot be loaded into a [PackedScene], or [constant "
-"ERR_CANT_CREATE] if that scene cannot be instantiated.\n"
-"[b]Note:[/b] The scene change is deferred, which means that the new scene "
-"node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene] call."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Changes the running scene to a new instance of the given [PackedScene].\n"
-"Returns [constant OK] on success or [constant ERR_CANT_CREATE] if the scene "
-"cannot be instantiated.\n"
-"[b]Note:[/b] The scene change is deferred, which means that the new scene "
-"node is added on the next idle frame. You won't be able to access it "
-"immediately after the [method change_scene_to] call.\n"
-"[b]Note:[/b] Passing a value of [code]null[/code] into the method will "
-"unload the current scene without loading a new one."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Returns a [SceneTreeTimer] which will [signal SceneTreeTimer.timeout] after "
-"the given time in seconds elapsed in this [SceneTree]. If "
-"[code]pause_mode_process[/code] is set to [code]false[/code], pausing the "
-"[SceneTree] will also pause the timer.\n"
-"Commonly used to create a one-shot delay timer as in the following example:\n"
-"[codeblock]\n"
-"func some_function():\n"
-"    print(\"start\")\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"    print(\"end\")\n"
-"[/codeblock]\n"
-"The timer will be automatically freed after its time elapses."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Creates and returns a new [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Returns the current frame number, i.e. the total frame count since the "
-"application started."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Returns the peer IDs of all connected peers of this [SceneTree]'s [member "
-"network_peer]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Returns the unique peer ID of this [SceneTree]'s [member network_peer]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Returns the number of nodes in this [SceneTree]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Returns a list of all nodes assigned to the given group."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Returns an array of currently existing [SceneTreeTween]s in the [SceneTree] "
-"(both running and paused)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Returns the sender's peer ID for the most recently received RPC call."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Returns [code]true[/code] if the given group exists."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the most recent [InputEvent] was marked as "
-"handled with [method set_input_as_handled]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Vektor normalisiert ist, andernfalls "
-"false."
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Returns [code]true[/code] if this [SceneTree]'s [member network_peer] is in "
-"server mode (listening for connections)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Sends the given notification to all members of the [code]group[/code]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Sends the given notification to all members of the [code]group[/code], "
-"respecting the given [enum GroupCallFlags]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Queues the given object for deletion, delaying the call to [method Object."
-"free] to after the current frame."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Quits the application at the end of the current iteration. A process "
-"[code]exit_code[/code] can optionally be passed as an argument. If this "
-"argument is [code]0[/code] or greater, it will override the [member OS."
-"exit_code] defined before quitting the application.\n"
-"[b]Note:[/b] On iOS this method doesn't work. Instead, as recommended by the "
-"iOS Human Interface Guidelines, the user is expected to close apps via the "
-"Home button."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Reloads the currently active scene.\n"
-"Returns [constant OK] on success, [constant ERR_UNCONFIGURED] if no [member "
-"current_scene] was defined yet, [constant ERR_CANT_OPEN] if [member "
-"current_scene] cannot be loaded into a [PackedScene], or [constant "
-"ERR_CANT_CREATE] if the scene cannot be instantiated."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Sets the given [code]property[/code] to [code]value[/code] on all members of "
-"the given group."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Sets the given [code]property[/code] to [code]value[/code] on all members of "
-"the given group, respecting the given [enum GroupCallFlags]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Marks the most recent [InputEvent] as handled."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Configures screen stretching to the given [enum StretchMode], [enum "
-"StretchAspect], minimum size and [code]scale[/code]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], the application automatically accepts quitting.\n"
-"For mobile platforms, see [member quit_on_go_back]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "The current scene."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], collision shapes will be visible when running the game "
-"from the editor for debugging purposes.\n"
-"[b]Note:[/b] This property is not designed to be changed at run-time. "
-"Changing the value of [member debug_collisions_hint] while the project is "
-"running will not have the desired effect."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], navigation polygons will be visible when running the "
-"game from the editor for debugging purposes.\n"
-"[b]Note:[/b] This property is not designed to be changed at run-time. "
-"Changing the value of [member debug_navigation_hint] while the project is "
-"running will not have the desired effect."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "The root of the edited scene."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "The default [MultiplayerAPI] instance for this [SceneTree]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code] (default value), enables automatic polling of the "
-"[MultiplayerAPI] for this SceneTree during [signal idle_frame].\n"
-"If [code]false[/code], you need to manually call [method MultiplayerAPI."
-"poll] to process network packets and deliver RPCs/RSETs. This allows running "
-"RPCs/RSETs in a different loop (e.g. physics, thread, specific time step) "
-"and for manual [Mutex] protection when accessing the [MultiplayerAPI] from "
-"threads."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"The peer object to handle the RPC system (effectively enabling networking "
-"when set). Depending on the peer itself, the [SceneTree] will become a "
-"network server (check with [method is_network_server]) and will set the root "
-"node's network mode to master, or it will become a regular peer with the "
-"root node set to puppet. All child nodes are set to inherit the network mode "
-"by default. Handling of networking-related events (connection, "
-"disconnection, new clients) is done by connecting to [SceneTree]'s signals."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], the [SceneTree] is paused. Doing so will have the "
-"following behavior:\n"
-"- 2D and 3D physics will be stopped. This includes signals and collision "
-"detection.\n"
-"- [method Node._process], [method Node._physics_process] and [method Node."
-"_input] will not be called anymore in nodes."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Although physics interpolation would normally be globally turned on and off "
-"using [member ProjectSettings.physics/common/physics_interpolation], this "
-"property allows control over interpolation at runtime."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], the application quits automatically on going back (e."
-"g. on Android).\n"
-"To handle 'Go Back' button when this option is disabled, use [constant "
-"MainLoop.NOTIFICATION_WM_GO_BACK_REQUEST]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], the [SceneTree]'s [member network_peer] refuses new "
-"incoming connections."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "The [SceneTree]'s root [Viewport]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"If [code]true[/code], font oversampling is enabled. This means that "
-"[DynamicFont]s will be rendered at higher or lower size than configured "
-"based on the viewport's scaling ratio. For example, in a viewport scaled "
-"with a factor 1.5, a font configured with size 14 would be rendered with "
-"size 21 ([code]14 * 1.5[/code]).\n"
-"[b]Note:[/b] Font oversampling is only used if the viewport stretch mode is "
-"[constant STRETCH_MODE_VIEWPORT], and if the stretch aspect mode is "
-"different from [constant STRETCH_ASPECT_IGNORE].\n"
-"[b]Note:[/b] This property is set automatically for the active [SceneTree] "
-"when the project starts based on the configuration of [code]rendering/"
-"quality/dynamic_fonts/use_oversampling[/code] in [ProjectSettings]. The "
-"property can however be overridden at runtime as needed."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted whenever this [SceneTree]'s [member network_peer] successfully "
-"connected to a server. Only emitted on clients."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted whenever this [SceneTree]'s [member network_peer] fails to establish "
-"a connection to a server. Only emitted on clients."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted when files are dragged from the OS file manager and dropped in the "
-"game window. The arguments are a list of file paths and the identifier of "
-"the screen where the drag originated."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-#, fuzzy
-msgid "Emitted whenever global menu item is clicked."
-msgstr "Gesendet wenn das Rechteck Element geändert wurde."
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted immediately before [method Node._process] is called on every node in "
-"the [SceneTree]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted whenever this [SceneTree]'s [member network_peer] connects with a "
-"new peer. ID is the peer ID of the new peer. Clients get notified when other "
-"clients connect to the same server. Upon connecting to a server, a client "
-"also receives this signal for the server (with ID being 1)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted whenever this [SceneTree]'s [member network_peer] disconnects from a "
-"peer. Clients get notified when other clients disconnect from the same "
-"server."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Emitted whenever a node is added to the [SceneTree]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted when a node's configuration changed. Only emitted in [code]tool[/"
-"code] mode."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Emitted whenever a node is removed from the [SceneTree]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Emitted whenever a node is renamed."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted immediately before [method Node._physics_process] is called on every "
-"node in the [SceneTree]."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted when the screen resolution (fullscreen) or window size (windowed) "
-"changes."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted whenever this [SceneTree]'s [member network_peer] disconnected from "
-"server. Only emitted on clients."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Emitted whenever the [SceneTree] hierarchy changed (children being moved or "
-"renamed, etc.)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Call a group with no flags (default)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Call a group in reverse scene order."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid "Call a group immediately (calls are normally made on idle)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Call a group only once even if the call is executed many times.\n"
-"[b]Note:[/b] Arguments are not taken into account when deciding whether the "
-"call is unique or not. Therefore when the same method is called with "
-"different arguments, only the first call will be performed."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-#, fuzzy
-msgid "No stretching."
-msgstr "Zuhören stoppen."
-
-#: doc/classes/SceneTree.xml
-msgid "Render stretching in higher resolution (interpolated)."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Keep the specified display resolution. No interpolation. Content may appear "
-"pixelated."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Fill the window with the content stretched to cover excessive space. Content "
-"may appear stretched."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Retain the same aspect ratio by padding with black bars on either axis. This "
-"prevents distortion."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Expand vertically. Left/right black bars may appear if the window is too "
-"wide."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Expand horizontally. Top/bottom black bars may appear if the window is too "
-"tall."
-msgstr ""
-
-#: doc/classes/SceneTree.xml
-msgid ""
-"Expand in both directions, retaining the same aspect ratio. This prevents "
-"distortion while avoiding black bars."
-msgstr ""
-
-#: doc/classes/SceneTreeTimer.xml
-msgid "One-shot timer."
-msgstr "Einmaliger Timer."
-
-#: doc/classes/SceneTreeTimer.xml
-msgid ""
-"A one-shot timer managed by the scene tree, which emits [signal timeout] on "
-"completion. See also [method SceneTree.create_timer].\n"
-"As opposed to [Timer], it does not require the instantiation of a node. "
-"Commonly used to create a one-shot delay timer as in the following example:\n"
-"[codeblock]\n"
-"func some_function():\n"
-"    print(\"Timer started.\")\n"
-"    yield(get_tree().create_timer(1.0), \"timeout\")\n"
-"    print(\"Timer ended.\")\n"
-"[/codeblock]\n"
-"The timer will be dereferenced after its time elapses. To preserve the "
-"timer, you can keep a reference to it. See [Reference]."
-msgstr ""
-
-#: doc/classes/SceneTreeTimer.xml
-msgid "The time remaining (in seconds)."
-msgstr ""
-
-#: doc/classes/SceneTreeTimer.xml doc/classes/Timer.xml
-msgid "Emitted when the timer reaches 0."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Lightweight object used for general-purpose animation via script, using "
-"[Tweener]s."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"[SceneTreeTween] is a tween managed by the scene tree. As opposed to "
-"[Tween], it does not require the instantiation of a node.\n"
-"[SceneTreeTween]s are more light-weight than [AnimationPlayer], so they are "
-"very much suited for simple animations or general tasks that don't require "
-"visual tweaking provided by the editor. They can be used in a fire-and-"
-"forget manner for some logic that normally would be done by code. You can e."
-"g. make something shoot periodically by using a looped [CallbackTweener] "
-"with a delay.\n"
-"A [SceneTreeTween] can be created by using either [method SceneTree."
-"create_tween] or [method Node.create_tween]. [SceneTreeTween]s created "
-"manually (i.e. by using [code]Tween.new()[/code]) are invalid. They can't be "
-"used for tweening values, but you can do manual interpolation with [method "
-"interpolate_value].\n"
-"A tween animation is created by adding [Tweener]s to the [SceneTreeTween] "
-"object, using [method tween_property], [method tween_interval], [method "
-"tween_callback] or [method tween_method]:\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween()\n"
-"tween.tween_property($Sprite, \"modulate\", Color.red, 1)\n"
-"tween.tween_property($Sprite, \"scale\", Vector2(), 1)\n"
-"tween.tween_callback($Sprite, \"queue_free\")\n"
-"[/codeblock]\n"
-"This sequence will make the [code]$Sprite[/code] node turn red, then shrink, "
-"before finally calling [method Node.queue_free] to free the sprite. "
-"[Tweener]s are executed one after another by default. This behavior can be "
-"changed using [method parallel] and [method set_parallel].\n"
-"When a [Tweener] is created with one of the [code]tween_*[/code] methods, a "
-"chained method call can be used to tweak the properties of this [Tweener]. "
-"For example, if you want to set a different transition type in the above "
-"example, you can use [method set_trans]:\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween()\n"
-"tween.tween_property($Sprite, \"modulate\", Color.red, 1).set_trans(Tween."
-"TRANS_SINE)\n"
-"tween.tween_property($Sprite, \"scale\", Vector2(), 1).set_trans(Tween."
-"TRANS_BOUNCE)\n"
-"tween.tween_callback($Sprite, \"queue_free\")\n"
-"[/codeblock]\n"
-"Most of the [SceneTreeTween] methods can be chained this way too. In the "
-"following example the [SceneTreeTween] is bound to the running script's node "
-"and a default transition is set for its [Tweener]s:\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween().bind_node(self).set_trans(Tween."
-"TRANS_ELASTIC)\n"
-"tween.tween_property($Sprite, \"modulate\", Color.red, 1)\n"
-"tween.tween_property($Sprite, \"scale\", Vector2(), 1)\n"
-"tween.tween_callback($Sprite, \"queue_free\")\n"
-"[/codeblock]\n"
-"Another interesting use for [SceneTreeTween]s is animating arbitrary sets of "
-"objects:\n"
-"[codeblock]\n"
-"var tween = create_tween()\n"
-"for sprite in get_children():\n"
-"    tween.tween_property(sprite, \"position\", Vector2(0, 0), 1)\n"
-"[/codeblock]\n"
-"In the example above, all children of a node are moved one after another to "
-"position (0, 0).\n"
-"You should avoid using more than one [SceneTreeTween] per object's property. "
-"If two or more tweens animate one property at the same time, the last one "
-"created will take priority and assign the final value. If you want to "
-"interrupt and restart an animation, consider assigning the [SceneTreeTween] "
-"to a variable:\n"
-"[codeblock]\n"
-"var tween\n"
-"func animate():\n"
-"    if tween:\n"
-"        tween.kill() # Abort the previous animation.\n"
-"    tween = create_tween()\n"
-"[/codeblock]\n"
-"Some [Tweener]s use transitions and eases. The first accepts a [enum Tween."
-"TransitionType] constant, and refers to the way the timing of the animation "
-"is handled (see [url=https://easings.net/]easings.net[/url] for some "
-"examples). The second accepts an [enum Tween.EaseType] constant, and "
-"controls where the [code]trans_type[/code] is applied to the interpolation "
-"(in the beginning, the end, or both). If you don't know which transition and "
-"easing to pick, you can try different [enum Tween.TransitionType] constants "
-"with [constant Tween.EASE_IN_OUT], and use the one that looks best.\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"tween_cheatsheet.png]Tween easing and transition types cheatsheet[/url]\n"
-"[b]Note:[/b] All [SceneTreeTween]s will automatically start by default. To "
-"prevent a [SceneTreeTween] from autostarting, you can call [method stop] "
-"immediately after it is created.\n"
-"[b]Note:[/b] [SceneTreeTween]s are processing after all of nodes in the "
-"current frame, i.e. after [method Node._process] or [method Node."
-"_physics_process] (depending on [enum Tween.TweenProcessMode])."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Binds this [SceneTreeTween] with the given [code]node[/code]. "
-"[SceneTreeTween]s are processed directly by the [SceneTree], so they run "
-"independently of the animated nodes. When you bind a [Node] with the "
-"[SceneTreeTween], the [SceneTreeTween] will halt the animation when the "
-"object is not inside tree and the [SceneTreeTween] will be automatically "
-"killed when the bound object is freed. Also [constant TWEEN_PAUSE_BOUND] "
-"will make the pausing behavior dependent on the bound node.\n"
-"For a shorter way to create and bind a [SceneTreeTween], you can use [method "
-"Node.create_tween]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Used to chain two [Tweener]s after [method set_parallel] is called with "
-"[code]true[/code].\n"
-"[codeblock]\n"
-"var tween = create_tween().set_parallel(true)\n"
-"tween.tween_property(...)\n"
-"tween.tween_property(...) # Will run parallelly with above.\n"
-"tween.chain().tween_property(...) # Will run after two above are finished.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Processes the [SceneTreeTween] by the given [code]delta[/code] value, in "
-"seconds. This is mostly useful for manual control when the [SceneTreeTween] "
-"is paused. It can also be used to end the [SceneTreeTween] animation "
-"immediately, by setting [code]delta[/code] longer than the whole duration of "
-"the [SceneTreeTween] animation.\n"
-"Returns [code]true[/code] if the [SceneTreeTween] still has [Tweener]s that "
-"haven't finished.\n"
-"[b]Note:[/b] The [SceneTreeTween] will become invalid in the next processing "
-"frame after its animation finishes. Calling [method stop] after performing "
-"[method custom_step] instead keeps and resets the [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Returns the total time in seconds the [SceneTreeTween] has been animating (i."
-"e. the time since it started, not counting pauses etc.). The time is "
-"affected by [method set_speed_scale], and [method stop] will reset it to "
-"[code]0[/code].\n"
-"[b]Note:[/b] As it results from accumulating frame deltas, the time returned "
-"after the [SceneTreeTween] has finished animating will be slightly greater "
-"than the actual [SceneTreeTween] duration."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"This method can be used for manual interpolation of a value, when you don't "
-"want [SceneTreeTween] to do animating for you. It's similar to [method "
-"@GDScript.lerp], but with support for custom transition and easing.\n"
-"[code]initial_value[/code] is the starting value of the interpolation.\n"
-"[code]delta_value[/code] is the change of the value in the interpolation, i."
-"e. it's equal to [code]final_value - initial_value[/code].\n"
-"[code]elapsed_time[/code] is the time in seconds that passed after the "
-"interpolation started and it's used to control the position of the "
-"interpolation. E.g. when it's equal to half of the [code]duration[/code], "
-"the interpolated value will be halfway between initial and final values. "
-"This value can also be greater than [code]duration[/code] or lower than 0, "
-"which will extrapolate the value.\n"
-"[code]duration[/code] is the total time of the interpolation.\n"
-"[b]Note:[/b] If [code]duration[/code] is equal to [code]0[/code], the method "
-"will always return the final value, regardless of [code]elapsed_time[/code] "
-"provided."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Returns whether the [SceneTreeTween] is currently running, i.e. it wasn't "
-"paused and it's not finished."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Returns whether the [SceneTreeTween] is valid. A valid [SceneTreeTween] is a "
-"[SceneTreeTween] contained by the scene tree (i.e. the array from [method "
-"SceneTree.get_processed_tweens] will contain this [SceneTreeTween]). A "
-"[SceneTreeTween] might become invalid when it has finished tweening, is "
-"killed, or when created with [code]SceneTreeTween.new()[/code]. Invalid "
-"[SceneTreeTween]s can't have [Tweener]s appended. You can however still use "
-"[method interpolate_value]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid "Aborts all tweening operations and invalidates the [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Makes the next [Tweener] run parallelly to the previous one. Example:\n"
-"[codeblock]\n"
-"var tween = create_tween()\n"
-"tween.tween_property(...)\n"
-"tween.parallel().tween_property(...)\n"
-"tween.parallel().tween_property(...)\n"
-"[/codeblock]\n"
-"All [Tweener]s in the example will run at the same time.\n"
-"You can make the [SceneTreeTween] parallel by default by using [method "
-"set_parallel]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Pauses the tweening. The animation can be resumed by using [method play]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid "Resumes a paused or stopped [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Sets the default ease type for [PropertyTweener]s and [MethodTweener]s "
-"animated by this [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Sets the number of times the tweening sequence will be repeated, i.e. "
-"[code]set_loops(2)[/code] will run the animation twice.\n"
-"Calling this method without arguments will make the [SceneTreeTween] run "
-"infinitely, until either it is killed with [method kill], the "
-"[SceneTreeTween]'s bound node is freed, or all the animated objects have "
-"been freed (which makes further animation impossible).\n"
-"[b]Warning:[/b] Make sure to always add some duration/delay when using "
-"infinite loops. To prevent the game freezing, 0-duration looped animations "
-"(e.g. a single [CallbackTweener] with no delay) are stopped after a small "
-"number of loops, which may produce unexpected results. If a "
-"[SceneTreeTween]'s lifetime depends on some node, always use [method "
-"bind_node]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"If [code]parallel[/code] is [code]true[/code], the [Tweener]s appended after "
-"this method will by default run simultaneously, as opposed to sequentially."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Determines the behavior of the [SceneTreeTween] when the [SceneTree] is "
-"paused. Check [enum TweenPauseMode] for options.\n"
-"Default value is [constant TWEEN_PAUSE_BOUND]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Determines whether the [SceneTreeTween] should run during idle frame (see "
-"[method Node._process]) or physics frame (see [method Node."
-"_physics_process].\n"
-"Default value is [constant Tween.TWEEN_PROCESS_IDLE]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Scales the speed of tweening. This affects all [Tweener]s and their delays."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Sets the default transition type for [PropertyTweener]s and [MethodTweener]s "
-"animated by this [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Stops the tweening and resets the [SceneTreeTween] to its initial state. "
-"This will not remove any appended [Tweener]s."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Creates and appends a [CallbackTweener]. This method can be used to call an "
-"arbitrary method in any object. Use [code]binds[/code] to bind additional "
-"arguments for the call.\n"
-"Example: object that keeps shooting every 1 second.\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween().set_loops()\n"
-"tween.tween_callback(self, \"shoot\").set_delay(1)\n"
-"[/codeblock]\n"
-"Example: turning a sprite red and then blue, with 2 second delay.\n"
-"[codeblock]\n"
-"var tween = get_tree().create_tween()\n"
-"tween.tween_callback($Sprite, \"set_modulate\", [Color.red]).set_delay(2)\n"
-"tween.tween_callback($Sprite, \"set_modulate\", [Color.blue]).set_delay(2)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Creates and appends an [IntervalTweener]. This method can be used to create "
-"delays in the tween animation, as an alternative to using the delay in other "
-"[Tweener]s, or when there's no animation (in which case the [SceneTreeTween] "
-"acts as a timer). [code]time[/code] is the length of the interval, in "
-"seconds.\n"
-"Example: creating an interval in code execution.\n"
-"[codeblock]\n"
-"# ... some code\n"
-"yield(create_tween().tween_interval(2), \"finished\")\n"
-"# ... more code\n"
-"[/codeblock]\n"
-"Example: creating an object that moves back and forth and jumps every few "
-"seconds.\n"
-"[codeblock]\n"
-"var tween = create_tween().set_loops()\n"
-"tween.tween_property($Sprite, \"position:x\", 200.0, 1).as_relative()\n"
-"tween.tween_callback(self, \"jump\")\n"
-"tween.tween_interval(2)\n"
-"tween.tween_property($Sprite, \"position:x\", -200.0, 1).as_relative()\n"
-"tween.tween_callback(self, \"jump\")\n"
-"tween.tween_interval(2)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Creates and appends a [MethodTweener]. This method is similar to a "
-"combination of [method tween_callback] and [method tween_property]. It calls "
-"a method over time with a tweened value provided as an argument. The value "
-"is tweened between [code]from[/code] and [code]to[/code] over the time "
-"specified by [code]duration[/code], in seconds. Use [code]binds[/code] to "
-"bind additional arguments for the call. You can use [method MethodTweener."
-"set_ease] and [method MethodTweener.set_trans] to tweak the easing and "
-"transition of the value or [method MethodTweener.set_delay] to delay the "
-"tweening.\n"
-"Example: making a 3D object look from one point to another point.\n"
-"[codeblock]\n"
-"var tween = create_tween()\n"
-"tween.tween_method(self, \"look_at\", Vector3(-1, 0, -1), Vector3(1, 0, -1), "
-"1, [Vector3.UP]) # The look_at() method takes up vector as second argument.\n"
-"[/codeblock]\n"
-"Example: setting a text of a [Label], using an intermediate method and after "
-"a delay.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    var tween = create_tween()\n"
-"    tween.tween_method(self, \"set_label_text\", 0, 10, 1).set_delay(1)\n"
-"\n"
-"func set_label_text(value: int):\n"
-"    $Label.text = \"Counting \" + str(value)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Creates and appends a [PropertyTweener]. This method tweens a "
-"[code]property[/code] of an [code]object[/code] between an initial value and "
-"[code]final_val[/code] in a span of time equal to [code]duration[/code], in "
-"seconds. The initial value by default is the property's value at the time "
-"the tweening of the [PropertyTweener] starts. For example:\n"
-"[codeblock]\n"
-"var tween = create_tween()\n"
-"tween.tween_property($Sprite, \"position\", Vector2(100, 200), 1)\n"
-"tween.tween_property($Sprite, \"position\", Vector2(200, 300), 1)\n"
-"[/codeblock]\n"
-"will move the sprite to position (100, 200) and then to (200, 300). If you "
-"use [method PropertyTweener.from] or [method PropertyTweener.from_current], "
-"the starting position will be overwritten by the given value instead. See "
-"other methods in [PropertyTweener] to see how the tweening can be tweaked "
-"further.\n"
-"[b]Note:[/b] You can find the correct property name by hovering over the "
-"property in the Inspector. You can also provide the components of a property "
-"directly by using [code]\"property:component\"[/code] (eg. [code]position:x[/"
-"code]), where it would only apply to that particular component.\n"
-"Example: moving object twice from the same position, with different "
-"transition types.\n"
-"[codeblock]\n"
-"var tween = create_tween()\n"
-"tween.tween_property($Sprite, \"position\", Vector2.RIGHT * 300, 1)."
-"as_relative().set_trans(Tween.TRANS_SINE)\n"
-"tween.tween_property($Sprite, \"position\", Vector2.RIGHT * 300, 1)."
-"as_relative().from_current().set_trans(Tween.TRANS_EXPO)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Emitted when the [SceneTreeTween] has finished all tweening. Never emitted "
-"when the [SceneTreeTween] is set to infinite looping (see [method "
-"set_loops]).\n"
-"[b]Note:[/b] The [SceneTreeTween] is removed (invalidated) in the next "
-"processing frame after this signal is emitted. Calling [method stop] inside "
-"the signal callback will prevent the [SceneTreeTween] from being removed."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Emitted when a full loop is complete (see [method set_loops]), providing the "
-"loop index. This signal is not emitted after the final loop, use [signal "
-"finished] instead for this case."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"Emitted when one step of the [SceneTreeTween] is complete, providing the "
-"step index. One step is either a single [Tweener] or a group of [Tweener]s "
-"running in parallel."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"If the [SceneTreeTween] has a bound node, it will process when that node can "
-"process (see [member Node.pause_mode]). Otherwise it's the same as [constant "
-"TWEEN_PAUSE_STOP]."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid "If [SceneTree] is paused, the [SceneTreeTween] will also pause."
-msgstr ""
-
-#: doc/classes/SceneTreeTween.xml
-msgid ""
-"The [SceneTreeTween] will process regardless of whether [SceneTree] is "
-"paused."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "A class stored as a resource."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid ""
-"A class stored as a resource. A script extends the functionality of all "
-"objects that instance it.\n"
-"The [code]new[/code] method of a script subclass creates a new instance. "
-"[method Object.set_script] extends an existing object, if that object's "
-"class matches one of the script's base classes."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns [code]true[/code] if the script can be instanced."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns the script directly inherited by this script."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns the script's base type."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns the default value of the specified property."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns a dictionary containing constant names and their values."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns the list of methods in this [Script]."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns the list of properties in this [Script]."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns the list of user signals defined in this [Script]."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid ""
-"Returns [code]true[/code] if the script, or a base class, defines a signal "
-"with the given name."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Returns [code]true[/code] if the script contains non-empty source code."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid ""
-"Returns [code]true[/code] if [code]base_object[/code] is an instance of this "
-"script."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid ""
-"Returns [code]true[/code] if the script is a tool script. A tool script can "
-"run in the editor."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid "Reloads the script's class implementation. Returns an error code."
-msgstr ""
-
-#: doc/classes/Script.xml
-msgid ""
-"The script source code or an empty string if source code is not available. "
-"When set, does not reload the class implementation automatically."
-msgstr ""
-
-#: doc/classes/ScriptCreateDialog.xml
-msgid "The Editor's popup dialog for creating new [Script] files."
-msgstr ""
-
-#: doc/classes/ScriptCreateDialog.xml
-msgid ""
-"The [ScriptCreateDialog] creates script files according to a given template "
-"for a given scripting language. The standard use is to configure its fields "
-"prior to calling one of the [method Popup.popup] methods.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    dialog.config(\"Node\", \"res://new_node.gd\") # For in-engine types\n"
-"    dialog.config(\"\\\"res://base_node.gd\\\"\", \"res://derived_node.gd\") "
-"# For script types\n"
-"    dialog.popup_centered()\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ScriptCreateDialog.xml
-msgid "Prefills required fields to configure the ScriptCreateDialog for use."
-msgstr ""
-
-#: doc/classes/ScriptCreateDialog.xml
-msgid "Emitted when the user clicks the OK button."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid "Godot editor's script editor."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid ""
-"[b]Note:[/b] This class shouldn't be instantiated directly. Instead, access "
-"the singleton using [method EditorInterface.get_script_editor]."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid "Returns a [Script] that is currently active in editor."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid ""
-"Returns an array with all [Script] objects which are currently open in "
-"editor."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid "Goes to the specified line in the current script."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid ""
-"Opens the script create dialog. The script will extend [code]base_name[/"
-"code]. The file extension can be omitted from [code]base_path[/code]. It "
-"will be added based on the selected scripting language."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid ""
-"Reload all currently opened scripts from disk in case the file contents are "
-"newer."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid ""
-"Emitted when user changed active script. Argument is a freshly activated "
-"[Script]."
-msgstr ""
-
-#: doc/classes/ScriptEditor.xml
-msgid ""
-"Emitted when editor is about to close the active script. Argument is a "
-"[Script] that is going to be closed."
-msgstr ""
-
-#: doc/classes/ScrollBar.xml
-msgid "Base class for scroll bars."
-msgstr ""
-
-#: doc/classes/ScrollBar.xml
-msgid ""
-"Scrollbars are a [Range]-based [Control], that display a draggable area (the "
-"size of the page). Horizontal ([HScrollBar]) and Vertical ([VScrollBar]) "
-"versions are available."
-msgstr ""
-
-#: doc/classes/ScrollBar.xml
-msgid ""
-"Overrides the step used when clicking increment and decrement buttons or "
-"when using arrow keys when the [ScrollBar] is focused."
-msgstr ""
-
-#: doc/classes/ScrollBar.xml
-msgid "Emitted when the scrollbar is being scrolled."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "A helper node for displaying scrollable elements such as lists."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid ""
-"A ScrollContainer node meant to contain a [Control] child. ScrollContainers "
-"will automatically create a scrollbar child ([HScrollBar], [VScrollBar], or "
-"both) when needed and will only draw the Control within the ScrollContainer "
-"area. Scrollbars will automatically be drawn at the right (for vertical) or "
-"bottom (for horizontal) and will enable dragging to move the viewable "
-"Control (and its children) within the ScrollContainer. Scrollbars will also "
-"automatically resize the grabber based on the [member Control.rect_min_size] "
-"of the Control relative to the ScrollContainer. Works great with a [Panel] "
-"control. You can set [code]EXPAND[/code] on the children's size flags, so "
-"they will upscale to the ScrollContainer's size if it's larger (scroll is "
-"invisible for the chosen dimension)."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid ""
-"Ensures the given [code]control[/code] is visible (must be a direct or "
-"indirect child of the ScrollContainer). Used by [member follow_focus].\n"
-"[b]Note:[/b] This will not work on a node that was just added during the "
-"same frame. If you want to scroll to a newly added child, you must wait "
-"until the next frame using [signal SceneTree.idle_frame]:\n"
-"[codeblock]\n"
-"add_child(child_node)\n"
-"yield(get_tree(), \"idle_frame\")\n"
-"ensure_control_visible(child_node)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid ""
-"Returns the horizontal scrollbar [HScrollBar] of this [ScrollContainer].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to disable the horizontal scrollbar, use "
-"[member scroll_horizontal_enabled]. If you want to only hide it instead, use "
-"its [member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid ""
-"Returns the vertical scrollbar [VScrollBar] of this [ScrollContainer].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to disable the vertical scrollbar, use "
-"[member scroll_vertical_enabled]. If you want to only hide it instead, use "
-"its [member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid ""
-"If [code]true[/code], the ScrollContainer will automatically scroll to "
-"focused children (including indirect children) to make sure they are fully "
-"visible."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "The current horizontal scroll value."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "If [code]true[/code], enables horizontal scrolling."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "The current vertical scroll value."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "If [code]true[/code], enables vertical scrolling."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "Emitted when scrolling stops."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "Emitted when scrolling is started."
-msgstr ""
-
-#: doc/classes/ScrollContainer.xml
-msgid "The background [StyleBox] of the [ScrollContainer]."
-msgstr ""
-
-#: doc/classes/SegmentShape2D.xml
-msgid "Segment shape for 2D collisions."
-msgstr ""
-
-#: doc/classes/SegmentShape2D.xml
-msgid ""
-"Segment shape for 2D collisions. Consists of two points, [code]a[/code] and "
-"[code]b[/code]."
-msgstr ""
-
-#: doc/classes/SegmentShape2D.xml
-msgid "The segment's first point position."
-msgstr ""
-
-#: doc/classes/SegmentShape2D.xml
-msgid "The segment's second point position."
-msgstr ""
-
-#: doc/classes/Semaphore.xml
-msgid "A synchronization semaphore."
-msgstr ""
-
-#: doc/classes/Semaphore.xml
-msgid ""
-"A synchronization semaphore which can be used to synchronize multiple "
-"[Thread]s. Initialized to zero on creation. Be careful to avoid deadlocks. "
-"For a binary version, see [Mutex]."
-msgstr ""
-
-#: doc/classes/Semaphore.xml
-msgid ""
-"Lowers the [Semaphore], allowing one more thread in.\n"
-"[b]Note:[/b] This method internals' can't possibly fail, but an error code "
-"is returned for backwards compatibility, which will always be [constant OK]."
-msgstr ""
-
-#: doc/classes/Semaphore.xml
-msgid ""
-"Like [method wait], but won't block, so if the value is zero, fails "
-"immediately and returns [constant ERR_BUSY]. If non-zero, it returns "
-"[constant OK] to report success."
-msgstr ""
-
-#: doc/classes/Semaphore.xml
-msgid ""
-"Waits for the [Semaphore], if its value is zero, blocks until non-zero.\n"
-"[b]Note:[/b] This method internals' can't possibly fail, but an error code "
-"is returned for backwards compatibility, which will always be [constant OK]."
-msgstr ""
-
-#: doc/classes/Separator.xml
-msgid "Base class for separators."
-msgstr ""
-
-#: doc/classes/Separator.xml
-msgid ""
-"Separator is a [Control] used for separating other controls. It's purely a "
-"visual decoration. Horizontal ([HSeparator]) and Vertical ([VSeparator]) "
-"versions are available."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid "A custom shader program."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"This class allows you to define a custom shader program that can be used by "
-"a [ShaderMaterial]. Shaders allow you to write your own custom behavior for "
-"rendering objects or updating particle information. For a detailed "
-"explanation and usage, please see the tutorials linked below."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Returns the texture that is set as default for the specified parameter.\n"
-"[b]Note:[/b] [code]param[/code] must match the name of the uniform in the "
-"code exactly."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Returns the shader mode for the shader, either [constant MODE_CANVAS_ITEM], "
-"[constant MODE_SPATIAL] or [constant MODE_PARTICLES]."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Returns [code]true[/code] if the shader has this param defined as a uniform "
-"in its code.\n"
-"[b]Note:[/b] [code]param[/code] must match the name of the uniform in the "
-"code exactly."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Sets the default texture to be used with a texture uniform. The default is "
-"used if a texture is not set in the [ShaderMaterial].\n"
-"[b]Note:[/b] [code]param[/code] must match the name of the uniform in the "
-"code exactly."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Returns the shader's code as the user has written it, not the full generated "
-"code used internally."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Returns the shader's custom defines. Custom defines can be used in Godot to "
-"add GLSL preprocessor directives (e.g: extensions) required for the shader "
-"logic.\n"
-"[b]Note:[/b] Custom defines are not validated by the Godot shader parser, so "
-"care should be taken when using them."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid "Mode used to draw all 3D objects."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid "Mode used to draw all 2D objects."
-msgstr ""
-
-#: doc/classes/Shader.xml
-msgid ""
-"Mode used to calculate particle information on a per-particle basis. Not "
-"used for drawing."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid "A material that uses a custom [Shader] program."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid ""
-"A material that uses a custom [Shader] program to render either items to "
-"screen or process particles. You can create multiple materials for the same "
-"shader but configure different values for the uniforms defined in the "
-"shader.\n"
-"[b]Note:[/b] Due to a renderer limitation, emissive [ShaderMaterial]s cannot "
-"emit light when used in a [GIProbe]. Only emissive [SpatialMaterial]s can "
-"emit light in a [GIProbe]."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid ""
-"Returns the current value set for this material of a uniform in the shader."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid ""
-"Returns [code]true[/code] if the property identified by [code]name[/code] "
-"can be reverted to a default value."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid ""
-"Returns the default value of the material property with given [code]name[/"
-"code]."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid ""
-"Changes the value set for this material of a uniform in the shader.\n"
-"[b]Note:[/b] [code]param[/code] must match the name of the uniform in the "
-"code exactly."
-msgstr ""
-
-#: doc/classes/ShaderMaterial.xml
-msgid "The [Shader] program used to render this material."
-msgstr ""
-
-#: doc/classes/Shape.xml
-msgid "Base class for all 3D shape resources."
-msgstr ""
-
-#: doc/classes/Shape.xml
-msgid ""
-"Base class for all 3D shape resources. Nodes that inherit from this can be "
-"used as shapes for a [PhysicsBody] or [Area] objects."
-msgstr ""
-
-#: doc/classes/Shape.xml
-msgid ""
-"Returns the [ArrayMesh] used to draw the debug collision for this [Shape]."
-msgstr ""
-
-#: doc/classes/Shape.xml
-msgid ""
-"The collision margin for the shape. Used in Bullet Physics only.\n"
-"Collision margins allow collision detection to be more efficient by adding "
-"an extra shell around shapes. Collision algorithms are more expensive when "
-"objects overlap by more than their margin, so a higher value for margins is "
-"better for performance, at the cost of accuracy around edges as it makes "
-"them less sharp."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid "Base class for all 2D shapes."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid "Base class for all 2D shapes. All 2D shape types inherit from this."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid ""
-"Returns [code]true[/code] if this shape is colliding with another.\n"
-"This method needs the transformation matrix for this shape "
-"([code]local_xform[/code]), the shape to check collisions with "
-"([code]with_shape[/code]), and the transformation matrix of that shape "
-"([code]shape_xform[/code])."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid ""
-"Returns a list of contact point pairs where this shape touches another.\n"
-"If there are no collisions, the returned list is empty. Otherwise, the "
-"returned list contains contact points arranged in pairs, with entries "
-"alternating between points on the boundary of this shape and points on the "
-"boundary of [code]with_shape[/code].\n"
-"A collision pair A, B can be used to calculate the collision normal with "
-"[code](B - A).normalized()[/code], and the collision depth with [code](B - "
-"A).length()[/code]. This information is typically used to separate shapes, "
-"particularly in collision solvers.\n"
-"This method needs the transformation matrix for this shape "
-"([code]local_xform[/code]), the shape to check collisions with "
-"([code]with_shape[/code]), and the transformation matrix of that shape "
-"([code]shape_xform[/code])."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid ""
-"Returns whether this shape would collide with another, if a given movement "
-"was applied.\n"
-"This method needs the transformation matrix for this shape "
-"([code]local_xform[/code]), the movement to test on this shape "
-"([code]local_motion[/code]), the shape to check collisions with "
-"([code]with_shape[/code]), the transformation matrix of that shape "
-"([code]shape_xform[/code]), and the movement to test onto the other object "
-"([code]shape_motion[/code])."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid ""
-"Returns a list of contact point pairs where this shape would touch another, "
-"if a given movement was applied.\n"
-"If there would be no collisions, the returned list is empty. Otherwise, the "
-"returned list contains contact points arranged in pairs, with entries "
-"alternating between points on the boundary of this shape and points on the "
-"boundary of [code]with_shape[/code].\n"
-"A collision pair A, B can be used to calculate the collision normal with "
-"[code](B - A).normalized()[/code], and the collision depth with [code](B - "
-"A).length()[/code]. This information is typically used to separate shapes, "
-"particularly in collision solvers.\n"
-"This method needs the transformation matrix for this shape "
-"([code]local_xform[/code]), the movement to test on this shape "
-"([code]local_motion[/code]), the shape to check collisions with "
-"([code]with_shape[/code]), the transformation matrix of that shape "
-"([code]shape_xform[/code]), and the movement to test onto the other object "
-"([code]shape_motion[/code])."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid ""
-"Draws a solid shape onto a [CanvasItem] with the [VisualServer] API filled "
-"with the specified [code]color[/code]. The exact drawing method is specific "
-"for each shape and cannot be configured."
-msgstr ""
-
-#: doc/classes/Shape2D.xml
-msgid ""
-"The shape's custom solver bias. Defines how much bodies react to enforce "
-"contact separation when this shape is involved.\n"
-"When set to [code]0.0[/code], the default value of [code]0.3[/code] is used."
-msgstr ""
-
-#: doc/classes/ShortCut.xml
-msgid "A shortcut for binding input."
-msgstr ""
-
-#: doc/classes/ShortCut.xml
-msgid ""
-"A shortcut for binding input.\n"
-"Shortcuts are commonly used for interacting with a [Control] element from a "
-"[InputEvent]."
-msgstr ""
-
-#: doc/classes/ShortCut.xml
-msgid "Returns the shortcut's [InputEvent] as a [String]."
-msgstr ""
-
-#: doc/classes/ShortCut.xml
-msgid ""
-"Returns [code]true[/code] if the shortcut's [InputEvent] equals [code]event[/"
-"code]."
-msgstr ""
-
-#: doc/classes/ShortCut.xml
-msgid "If [code]true[/code], this shortcut is valid."
-msgstr ""
-
-#: doc/classes/ShortCut.xml
-msgid ""
-"The shortcut's [InputEvent].\n"
-"Generally the [InputEvent] is a keyboard key, though it can be any "
-"[InputEvent]."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid "Skeleton for characters and animated objects."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Skeleton provides a hierarchical interface for managing bones, including "
-"pose, rest and animation (see [Animation]). It can also use ragdoll "
-"physics.\n"
-"The overall transform of a bone with respect to the skeleton is determined "
-"by the following hierarchical order: rest pose, custom pose and pose.\n"
-"Note that \"global pose\" below refers to the overall transform of the bone "
-"with respect to skeleton, so it not the actual global/world transform of the "
-"bone."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Adds a bone, with name [code]name[/code]. [method get_bone_count] will "
-"become the bone index."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid "[i]Deprecated soon.[/i]"
-msgstr "[i]Bald veraltet.[/i]"
-
-#: doc/classes/Skeleton.xml
-msgid "Clear all the bones in this skeleton."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid "Returns the bone index that matches [code]name[/code] as its name."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid "Returns the amount of bones in the skeleton."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Returns the custom pose of the specified bone. Custom pose is applied on top "
-"of the rest pose."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Returns the overall transform of the specified bone, with respect to the "
-"skeleton. Being relative to the skeleton frame, this is not the actual "
-"\"global\" transform of the bone."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Returns the overall transform of the specified bone, with respect to the "
-"skeleton, but without any global pose overrides. Being relative to the "
-"skeleton frame, this is not the actual \"global\" transform of the bone."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid "Returns the name of the bone at index [code]index[/code]."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Returns the bone index which is the parent of the bone at [code]bone_idx[/"
-"code]. If -1, then bone has no parent.\n"
-"[b]Note:[/b] The parent bone returned will always be less than "
-"[code]bone_idx[/code]."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Returns the pose transform of the specified bone. Pose is applied on top of "
-"the custom pose, which is applied on top the rest pose."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid "Returns the rest transform for a bone [code]bone_idx[/code]."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-msgid ""
-"Sets the bone index [code]parent_idx[/code] as the parent of the bone at "
-"[code]bone_idx[/code]. If -1, then bone has no parent.\n"
-"[b]Note:[/b] [code]parent_idx[/code] must be less than [code]bone_idx[/code]."
-msgstr ""
-
-#: doc/classes/Skeleton.xml
-#, fuzzy
-msgid "Sets the pose transform for bone [code]bone_idx[/code]."
-msgstr ""
-"Gibt zurück, ob die Knochenauflage für den Bone an [code]bone_idx[/code] "
-"deaktiviert ist."
-
-#: doc/classes/Skeleton.xml
-msgid "Sets the rest transform for bone [code]bone_idx[/code]."
-msgstr ""
-
-#: doc/classes/Skeleton2D.xml
-msgid "Skeleton for 2D characters and animated objects."
-msgstr ""
-
-#: doc/classes/Skeleton2D.xml
-msgid ""
-"Skeleton2D parents a hierarchy of [Bone2D] objects. It is a requirement of "
-"[Bone2D]. Skeleton2D holds a reference to the rest pose of its children and "
-"acts as a single point of access to its bones."
-msgstr ""
-
-#: doc/classes/Skeleton2D.xml
-msgid ""
-"Returns a [Bone2D] from the node hierarchy parented by Skeleton2D. The "
-"object to return is identified by the parameter [code]idx[/code]. Bones are "
-"indexed by descending the node hierarchy from top to bottom, adding the "
-"children of each branch before moving to the next sibling."
-msgstr ""
-
-#: doc/classes/Skeleton2D.xml
-msgid ""
-"Returns the number of [Bone2D] nodes in the node hierarchy parented by "
-"Skeleton2D."
-msgstr ""
-
-#: doc/classes/Skeleton2D.xml
-msgid "Returns the [RID] of a Skeleton2D instance."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"SkeletonIK is used to place the end bone of a [Skeleton] bone chain at a "
-"certain point in 3D by rotating all bones in the chain accordingly."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"SkeletonIK is used to place the end bone of a [Skeleton] bone chain at a "
-"certain point in 3D by rotating all bones in the chain accordingly. A "
-"typical scenario for IK in games is to place a characters feet on the ground "
-"or a characters hands on a currently hold object. SkeletonIK uses "
-"FabrikInverseKinematic internally to solve the bone chain and applies the "
-"results to the [Skeleton] [code]bones_global_pose_override[/code] property "
-"for all affected bones in the chain. If fully applied this overwrites any "
-"bone transform from [Animation]s or bone custom poses set by users. The "
-"applied amount can be controlled with the [code]interpolation[/code] "
-"property.\n"
-"[codeblock]\n"
-"# Apply IK effect automatically on every new frame (not the current)\n"
-"skeleton_ik_node.start()\n"
-"\n"
-"# Apply IK effect only on the current frame\n"
-"skeleton_ik_node.start(true)\n"
-"\n"
-"# Stop IK effect and reset bones_global_pose_override on Skeleton\n"
-"skeleton_ik_node.stop()\n"
-"\n"
-"# Apply full IK effect\n"
-"skeleton_ik_node.set_interpolation(1.0)\n"
-"\n"
-"# Apply half IK effect\n"
-"skeleton_ik_node.set_interpolation(0.5)\n"
-"\n"
-"# Apply zero IK effect (a value at or below 0.01 also removes "
-"bones_global_pose_override on Skeleton)\n"
-"skeleton_ik_node.set_interpolation(0.0)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Returns the parent [Skeleton] Node that was present when SkeletonIK entered "
-"the [SceneTree]. Returns null if the parent node was not a [Skeleton] Node "
-"when SkeletonIK entered the [SceneTree]."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Returns [code]true[/code] if SkeletonIK is applying IK effects on continues "
-"frames to the [Skeleton] bones. Returns [code]false[/code] if SkeletonIK is "
-"stopped or [method start] was used with the [code]one_time[/code] parameter "
-"set to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Starts applying IK effects on each frame to the [Skeleton] bones but will "
-"only take effect starting on the next frame. If [code]one_time[/code] is "
-"[code]true[/code], this will take effect immediately but also reset on the "
-"next frame."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Stops applying IK effects on each frame to the [Skeleton] bones and also "
-"calls [method Skeleton.clear_bones_global_pose_override] to remove existing "
-"overrides on all bones."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Interpolation value for how much the IK results are applied to the current "
-"skeleton bone chain. A value of [code]1.0[/code] will overwrite all skeleton "
-"bone transforms completely while a value of [code]0.0[/code] will visually "
-"disable the SkeletonIK. A value at or below [code]0.01[/code] also calls "
-"[method Skeleton.clear_bones_global_pose_override]."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Secondary target position (first is [member target] property or [member "
-"target_node]) for the IK chain. Use magnet position (pole target) to control "
-"the bending of the IK chain. Only works if the bone chain has more than 2 "
-"bones. The middle chain bone position will be linearly interpolated with the "
-"magnet position."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Number of iteration loops used by the IK solver to produce more accurate "
-"(and elegant) bone chain results."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"The minimum distance between bone and goal target. If the distance is below "
-"this value, the IK solver stops further iterations."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"If [code]true[/code] overwrites the rotation of the tip bone with the "
-"rotation of the [member target] (or [member target_node] if defined)."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid "The name of the current root bone, the first bone in the IK chain."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"First target of the IK chain where the tip bone is placed and, if [member "
-"override_tip_basis] is [code]true[/code], how the tip bone is rotated. If a "
-"[member target_node] path is available the nodes transform is used instead "
-"and this property is ignored."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"Target node [NodePath] for the IK chain. If available, the node's current "
-"[Transform] is used instead of the [member target] property."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"The name of the current tip bone, the last bone in the IK chain placed at "
-"the [member target] transform (or [member target_node] if defined)."
-msgstr ""
-
-#: doc/classes/SkeletonIK.xml
-msgid ""
-"If [code]true[/code], instructs the IK solver to consider the secondary "
-"magnet target (pole target) when calculating the bone chain. Use the magnet "
-"position (pole target) to control the bending of the IK chain."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "The base class for [PanoramaSky] and [ProceduralSky]."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid ""
-"The [Sky]'s radiance map size. The higher the radiance map size, the more "
-"detailed the lighting from the [Sky] will be.\n"
-"See [enum RadianceSize] constants for values.\n"
-"[b]Note:[/b] You will only benefit from high radiance sizes if you have "
-"perfectly sharp reflective surfaces in your project and are not using "
-"[ReflectionProbe]s or [GIProbe]s. For most projects, keeping [member "
-"radiance_size] to the default value is the best compromise between visuals "
-"and performance. Be careful when using high radiance size values as these "
-"can cause crashes on low-end GPUs."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "Radiance texture size is 32×32 pixels."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "Radiance texture size is 64×64 pixels."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "Radiance texture size is 128×128 pixels."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "Radiance texture size is 256×256 pixels."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "Radiance texture size is 512×512 pixels."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid ""
-"Radiance texture size is 1024×1024 pixels.\n"
-"[b]Note:[/b] [constant RADIANCE_SIZE_1024] is not exposed in the inspector "
-"as it is known to cause GPU hangs on certain systems."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid ""
-"Radiance texture size is 2048×2048 pixels.\n"
-"[b]Note:[/b] [constant RADIANCE_SIZE_2048] is not exposed in the inspector "
-"as it is known to cause GPU hangs on certain systems."
-msgstr ""
-
-#: doc/classes/Sky.xml
-msgid "Represents the size of the [enum RadianceSize] enum."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid "Base class for GUI sliders."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid ""
-"Base class for GUI sliders.\n"
-"[b]Note:[/b] The [signal Range.changed] and [signal Range.value_changed] "
-"signals are part of the [Range] class which this class inherits from."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid ""
-"If [code]true[/code], the slider can be interacted with. If [code]false[/"
-"code], the value can be changed only by code."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid "If [code]true[/code], the value can be changed using the mouse wheel."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid ""
-"Number of ticks displayed on the slider, including border ticks. Ticks are "
-"uniformly-distributed value markers."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid ""
-"If [code]true[/code], the slider will display ticks for minimum and maximum "
-"values."
-msgstr ""
-
-#: doc/classes/Slider.xml
-msgid ""
-"Emitted when dragging stops. If [code]value_changed[/code] is true, [member "
-"Range.value] is different from the value when you started the dragging."
-msgstr ""
-
-#: doc/classes/Slider.xml
-#, fuzzy
-msgid "Emitted when dragging is started."
-msgstr "Wird ausgegeben, wenn eine Vorlage hinzugefügt wird."
-
-#: doc/classes/SliderJoint.xml
-msgid "Slider between two PhysicsBodies in 3D."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"Slides across the X axis of the pivot object. See also [Generic6DOFJoint]."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"The amount of damping of the rotation when the limit is surpassed.\n"
-"A lower damping value allows a rotation initiated by body A to travel to "
-"body B slower."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"The amount of restitution of the rotation when the limit is surpassed.\n"
-"Does not affect damping."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"A factor applied to the all rotation once the limit is surpassed.\n"
-"Makes all rotation slower when between 0 and 1."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid "A factor applied to the all rotation in the limits."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"A factor applied to the all rotation across axes orthogonal to the slider."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"The amount of damping that happens once the limit defined by [member "
-"linear_limit/lower_distance] and [member linear_limit/upper_distance] is "
-"surpassed."
-msgstr ""
-
-#: doc/classes/SliderJoint.xml
-msgid ""
-"The amount of restitution once the limits are surpassed. The lower, the more "
-"velocity-energy gets lost."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-msgid "A soft mesh physics body."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-msgid ""
-"A deformable physics body. Used to create elastic or deformable objects such "
-"as cloth, rubber, or other flexible materials.\n"
-"[b]Note:[/b] There are many known bugs in [SoftBody]. Therefore, it's not "
-"recommended to use them for things that can affect gameplay (such as a "
-"player character made entirely out of soft bodies)."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-msgid "Returns local translation of a vertex in the surface array."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if vertex is set to pinned."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/SoftBody.xml
-msgid ""
-"Sets the pinned state of a surface vertex. When set to [code]true[/code], "
-"the optional [code]attachment_path[/code] can define a [Spatial] the pinned "
-"vertex will be attached to."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-#, fuzzy
-msgid ""
-"The physics layers this SoftBody is in.\n"
-"Collidable objects can exist in any of 32 different layers. These layers "
-"work like a tagging system, and are not visual. A collidable can use these "
-"layers to select with which objects it can collide, using the collision_mask "
-"property.\n"
-"A contact is detected if object A is in any of the layers that object B "
-"scans, or object B is in any layer scanned by object A. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-"Die Physikebene(n) des Bereichs. Kollidierbare Objekte können in jeder der "
-"32 verschiedenen Schichten vorhanden sein. Ein Kontakt wird erkannt, wenn "
-"sich Objekt A in einer der Ebenen befindet, die Objekt B abtastet, oder wenn "
-"sich Objekt B in einer der Ebenen befindet, die Objekt A abtastet. Siehe "
-"auch [member collision_mask]."
-
-#: doc/classes/SoftBody.xml
-msgid ""
-"The physics layers this SoftBody scans for collisions. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-msgid "[NodePath] to a [CollisionObject] this SoftBody should avoid clipping."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-msgid ""
-"If [code]true[/code], the [SoftBody] is simulated in physics. Can be set to "
-"[code]false[/code] to pause the physics simulation."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-#, fuzzy
-msgid "If [code]true[/code], the [SoftBody] will respond to [RayCast]s."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/SoftBody.xml
-msgid ""
-"Increasing this value will improve the resulting simulation, but can affect "
-"performance. Use with care."
-msgstr ""
-
-#: doc/classes/SoftBody.xml
-msgid "The SoftBody's mass."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Most basic 3D game object, parent of all 3D-related nodes."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Most basic 3D game object, with a 3D [Transform] and visibility settings. "
-"All other 3D game objects inherit from Spatial. Use [Spatial] as a parent "
-"node to move, scale, rotate and show/hide children in a 3D project.\n"
-"Affine operations (rotate, scale, translate) happen in parent's local "
-"coordinate system, unless the [Spatial] object is set as top-level. Affine "
-"operations in this coordinate system correspond to direct affine operations "
-"on the [Spatial]'s transform. The word local below refers to this coordinate "
-"system. The coordinate system that is attached to the [Spatial] object "
-"itself is referred to as object-local coordinate system.\n"
-"[b]Note:[/b] Unless otherwise specified, all methods that have angle "
-"parameters must have angles specified as [i]radians[/i]. To convert degrees "
-"to radians, use [method @GDScript.deg2rad]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Introduction to 3D"
-msgstr ""
-
-#: doc/classes/Spatial.xml doc/classes/Vector3.xml
-msgid "All 3D Demos"
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"When using physics interpolation, there will be circumstances in which you "
-"want to know the interpolated (displayed) transform of a node rather than "
-"the standard transform (which may only be accurate to the most recent "
-"physics tick).\n"
-"This is particularly important for frame-based operations that take place in "
-"[method Node._process], rather than [method Node._physics_process]. Examples "
-"include [Camera]s focusing on a node, or finding where to fire lasers from "
-"on a frame rather than physics tick."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns the parent [Spatial], or an empty [Object] if no parent exists or "
-"parent is not of type [Spatial]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns the current [World] resource this [Spatial] node is registered to."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotates the global (world) transformation around axis, a unit [Vector3], by "
-"specified angle in radians. The rotation axis is in global coordinate system."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Scales the global (world) transformation by the given [Vector3] scale "
-"factors."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Moves the global (world) transformation by [Vector3] offset. The offset is "
-"in global coordinate system."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Disables rendering of this node. Changes [member visible] to [code]false[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns whether node notifies about its local transformation changes. "
-"[Spatial] will not propagate this by default."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns whether this node uses a scale of [code](1, 1, 1)[/code] or its "
-"local transformation scale."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns whether this node is set as Toplevel, that is whether it ignores its "
-"parent nodes transformations."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns whether the node notifies about its global and local transformation "
-"changes. [Spatial] will not propagate this by default."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Returns [code]true[/code] if the node is present in the [SceneTree], its "
-"[member visible] property is [code]true[/code] and all its antecedents are "
-"also visible. If any antecedent is hidden, this node will not be visible in "
-"the scene tree."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotates the node so that the local forward axis (-Z) points toward the "
-"[code]target[/code] position.\n"
-"The local up axis (+Y) points as close to the [code]up[/code] vector as "
-"possible while staying perpendicular to the local forward axis. The "
-"resulting transform is orthogonal, and the scale is preserved. Non-uniform "
-"scaling may not work correctly.\n"
-"The [code]target[/code] position cannot be the same as the node's position, "
-"the [code]up[/code] vector cannot be zero, and the direction from the node's "
-"position to the [code]target[/code] vector cannot be parallel to the "
-"[code]up[/code] vector.\n"
-"Operations take place in global space."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Moves the node to the specified [code]position[/code], and then rotates "
-"itself to point toward the [code]target[/code] as per [method look_at]. "
-"Operations take place in global space."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Resets this node's transformations (like scale, skew and taper) preserving "
-"its rotation and translation by performing Gram-Schmidt orthonormalization "
-"on this node's [Transform]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotates the local transformation around axis, a unit [Vector3], by specified "
-"angle in radians."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotates the local transformation around axis, a unit [Vector3], by specified "
-"angle in radians. The rotation axis is in object-local coordinate system."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Rotates the local transformation around the X axis by angle in radians."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Rotates the local transformation around the Y axis by angle in radians."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Rotates the local transformation around the Z axis by angle in radians."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Scales the local transformation by given 3D scale factors in object-local "
-"coordinate system."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Makes the node ignore its parents transformations. Node transformations are "
-"only in global space."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Sets whether the node uses a scale of [code](1, 1, 1)[/code] or its local "
-"transformation scale. Changes to the local transformation scale are "
-"preserved."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Reset all transformations for this node (sets its [Transform] to the "
-"identity matrix)."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Sets whether the node ignores notification that its transformation (global "
-"or local) changed."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Sets whether the node notifies about its local transformation changes. "
-"[Spatial] will not propagate this by default."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Sets whether the node notifies about its global and local transformation "
-"changes. [Spatial] will not propagate this by default, unless it is in the "
-"editor context and it has a valid gizmo."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Enables rendering of this node. Changes [member visible] to [code]true[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Transforms [code]local_point[/code] from this node's local space to world "
-"space."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Transforms [code]global_point[/code] from world space to this node's local "
-"space."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Changes the node's position by the given offset [Vector3].\n"
-"Note that the translation [code]offset[/code] is affected by the node's "
-"scale, so if scaled by e.g. [code](10, 1, 1)[/code], a translation by an "
-"offset of [code](2, 0, 0)[/code] would actually add 20 ([code]2 * 10[/code]) "
-"to the X coordinate."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Changes the node's position by the given offset [Vector3] in local space."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Updates the [SpatialGizmo] of this node."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"The [SpatialGizmo] for this node. Used for example in [EditorSpatialGizmo] "
-"as custom visualization and editing handles in Editor."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotation part of the global transformation in radians, specified in terms of "
-"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
-"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
-"vector. The three Euler angles, which are the three independent parameters "
-"of the Euler-angle parametrization of the rotation matrix, are stored in a "
-"[Vector3] data structure not because the rotation is a vector, but only "
-"because [Vector3] exists as a convenient data-structure to store 3 floating-"
-"point numbers. Therefore, applying affine operations on the rotation "
-"\"vector\" is not meaningful."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "World space (global) [Transform] of this node."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Global position of this node. This is equivalent to [code]global_transform."
-"origin[/code]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotation part of the local transformation in radians, specified in terms of "
-"YXZ-Euler angles in the format (X angle, Y angle, Z angle).\n"
-"[b]Note:[/b] In the mathematical sense, rotation is a matrix and not a "
-"vector. The three Euler angles, which are the three independent parameters "
-"of the Euler-angle parametrization of the rotation matrix, are stored in a "
-"[Vector3] data structure not because the rotation is a vector, but only "
-"because [Vector3] exists as a convenient data-structure to store 3 floating-"
-"point numbers. Therefore, applying affine operations on the rotation "
-"\"vector\" is not meaningful."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Rotation part of the local transformation in degrees, specified in terms of "
-"YXZ-Euler angles in the format (X angle, Y angle, Z angle)."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Scale part of the local transformation.\n"
-"[b]Note:[/b] Mixed negative scales in 3D are not decomposable from the "
-"transformation matrix. Due to the way scale is represented with "
-"transformation matrices in Godot, the scale values will either be all "
-"positive or all negative.\n"
-"[b]Note:[/b] Not all nodes are visually scaled by the [member scale] "
-"property. For example, [Light]s are not visually affected by [member scale]."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Local space [Transform] of this node, with respect to the parent node."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Local translation of this node."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"If [code]true[/code], this node is drawn. The node is only visible if all of "
-"its antecedents are visible as well (in other words, [method "
-"is_visible_in_tree] must return [code]true[/code])."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Emitted by portal system gameplay monitor when a node enters the gameplay "
-"area."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Emitted by portal system gameplay monitor when a node exits the gameplay "
-"area."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Emitted when node visibility changes."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Spatial nodes receives this notification when their global transform "
-"changes. This means that either the current or a parent node changed its "
-"transform.\n"
-"In order for [constant NOTIFICATION_TRANSFORM_CHANGED] to work, users first "
-"need to ask for it, with [method set_notify_transform]. The notification is "
-"also sent if the node is in the editor context and it has a valid gizmo."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Spatial nodes receives this notification when they are registered to new "
-"[World] resource."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Spatial nodes receives this notification when they are unregistered from "
-"current [World] resource."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid "Spatial nodes receives this notification when their visibility changes."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Spatial nodes receives this notification if the portal system gameplay "
-"monitor detects they have entered the gameplay area."
-msgstr ""
-
-#: doc/classes/Spatial.xml
-msgid ""
-"Spatial nodes receives this notification if the portal system gameplay "
-"monitor detects they have exited the gameplay area."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Default 3D rendering material."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"This provides a default material with a wide variety of rendering features "
-"and properties without the need to write shader code. See the tutorial below "
-"for details."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Returns [code]true[/code], if the specified [enum Feature] is enabled."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Returns [code]true[/code], if the specified flag is enabled. See [enum "
-"Flags] enumerator for options."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die spezifizerte Flagge aktiviert ist. "
-"Siehe die [enum Flags] Aufzählung für Optionen."
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Returns the [Texture] associated with the specified [enum TextureParam]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], enables the specified [enum Feature]. Many features "
-"that are available in [SpatialMaterial]s need to be enabled before use. This "
-"way the cost for using the feature is only incurred when specified. Features "
-"can also be enabled by setting the corresponding member to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], enables the specified flag. Flags are optional "
-"behavior that can be turned on and off. Only one flag can be enabled at a "
-"time with this function, the flag enumerators cannot be bit-masked together "
-"to enable or disable multiple flags at once. Flags can also be enabled by "
-"setting the corresponding member to [code]true[/code]. See [enum Flags] "
-"enumerator for options."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Sets the [Texture] to be used by the specified [enum TextureParam]. This "
-"function is called when setting members ending in [code]*_texture[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The material's base color."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture to multiply by [member albedo_color]. Used for basic texturing of "
-"objects."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The strength of the anisotropy effect. This is multiplied by [member "
-"anisotropy_flowmap]'s alpha channel if a texture is defined there and the "
-"texture contains an alpha channel."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], anisotropy is enabled. Anisotropy changes the shape of "
-"the specular blob and aligns it to tangent space. This is useful for brushed "
-"aluminium and hair reflections.\n"
-"[b]Note:[/b] Mesh tangents are needed for anisotropy to work. If the mesh "
-"does not contain tangents, the anisotropy effect will appear broken.\n"
-"[b]Note:[/b] Material anisotropy should not to be confused with anisotropic "
-"texture filtering. Anisotropic texture filtering can be enabled by selecting "
-"a texture in the FileSystem dock, going to the Import dock, checking the "
-"[b]Anisotropic[/b] checkbox then clicking [b]Reimport[/b]. The anisotropic "
-"filtering level can be changed by adjusting [member ProjectSettings."
-"rendering/quality/filters/anisotropic_filter_level]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture that offsets the tangent map for anisotropy calculations and "
-"optionally controls the anisotropy effect (if an alpha channel is present). "
-"The flowmap texture is expected to be a derivative map, with the red channel "
-"representing distortion on the X axis and green channel representing "
-"distortion on the Y axis. Values below 0.5 will result in negative "
-"distortion, whereas values above 0.5 will result in positive distortion.\n"
-"If present, the texture's alpha channel will be used to multiply the "
-"strength of the [member anisotropy] effect. Fully opaque pixels will keep "
-"the anisotropy effect's original strength while fully transparent pixels "
-"will disable the anisotropy effect entirely. The flowmap texture's blue "
-"channel is ignored."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], ambient occlusion is enabled. Ambient occlusion "
-"darkens areas based on the [member ao_texture]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Amount that ambient occlusion affects lighting from lights. If [code]0[/"
-"code], ambient occlusion only affects ambient light. If [code]1[/code], "
-"ambient occlusion affects lights just as much as it affects ambient light. "
-"This can be used to impact the strength of the ambient occlusion effect, but "
-"typically looks unrealistic."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], use [code]UV2[/code] coordinates to look up from the "
-"[member ao_texture]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture that defines the amount of ambient occlusion for a given point on "
-"the object."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Specifies the channel of the [member ao_texture] in which the ambient "
-"occlusion information is stored. This is useful when you store the "
-"information for multiple effects in a single texture. For example if you "
-"stored metallic in the red channel, roughness in the blue, and ambient "
-"occlusion in the green you could reduce the number of textures you use."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [member ProjectSettings.rendering/gles3/shaders/shader_compilation_mode] "
-"is [code]Synchronous[/code] (with or without cache), this determines how "
-"this material must behave in regards to asynchronous shader compilation.\n"
-"[constant ASYNC_MODE_VISIBLE] is the default and the best for most cases."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Sets the strength of the clearcoat effect. Setting to [code]0[/code] looks "
-"the same as disabling the clearcoat effect."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], clearcoat rendering is enabled. Adds a secondary "
-"transparent pass to the lighting calculation resulting in an added specular "
-"blob. This makes materials appear as if they have a clear layer on them that "
-"can be either glossy or rough.\n"
-"[b]Note:[/b] Clearcoat rendering is not visible if the material has [member "
-"flags_unshaded] set to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Sets the roughness of the clearcoat pass. A higher value results in a "
-"smoother clearcoat while a lower value results in a rougher clearcoat."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture that defines the strength of the clearcoat effect and the glossiness "
-"of the clearcoat. Strength is specified in the red channel while glossiness "
-"is specified in the green channel."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the shader will read depth texture at multiple points "
-"along the view ray to determine occlusion and parrallax. This can be very "
-"performance demanding, but results in more realistic looking depth mapping."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], depth mapping is enabled (also called \"parallax "
-"mapping\" or \"height mapping\"). See also [member normal_enabled].\n"
-"[b]Note:[/b] Depth mapping is not supported if triplanar mapping is used on "
-"the same material. The value of [member depth_enabled] will be ignored if "
-"[member uv1_triplanar] is enabled."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], direction of the binormal is flipped before using in "
-"the depth effect. This may be necessary if you have encoded your binormals "
-"in a way that is conflicting with the depth effect."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], direction of the tangent is flipped before using in "
-"the depth effect. This may be necessary if you have encoded your tangents in "
-"a way that is conflicting with the depth effect."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Number of layers to use when using [member depth_deep_parallax] and the view "
-"direction is perpendicular to the surface of the object. A higher number "
-"will be more performance demanding while a lower number may not look as "
-"crisp."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Number of layers to use when using [member depth_deep_parallax] and the view "
-"direction is parallel to the surface of the object. A higher number will be "
-"more performance demanding while a lower number may not look as crisp."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Scales the depth offset effect. A higher number will create a larger depth."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to determine depth at a given pixel. Depth is always stored in "
-"the red channel."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture that specifies the color of the detail overlay."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Specifies how the [member detail_albedo] should blend with the current "
-"[code]ALBEDO[/code]. See [enum BlendMode] for options."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], enables the detail overlay. Detail is a second texture "
-"that gets mixed over the surface of the object based on [member "
-"detail_mask]. This can be used to add variation to objects, or to blend "
-"between two different albedo/normal textures."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to specify how the detail textures get blended with the base "
-"textures."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture that specifies the per-pixel normal of the detail overlay.\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y+, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Specifies whether to use [code]UV[/code] or [code]UV2[/code] for the detail "
-"layer. See [enum DetailUV] for options."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Distance at which the object appears fully opaque.\n"
-"[b]Note:[/b] If [code]distance_fade_max_distance[/code] is less than "
-"[code]distance_fade_min_distance[/code], the behavior will be reversed. The "
-"object will start to fade away at [code]distance_fade_max_distance[/code] "
-"and will fully disappear once it reaches [code]distance_fade_min_distance[/"
-"code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Distance at which the object starts to become visible. If the object is less "
-"than this distance away, it will be invisible.\n"
-"[b]Note:[/b] If [code]distance_fade_min_distance[/code] is greater than "
-"[code]distance_fade_max_distance[/code], the behavior will be reversed. The "
-"object will start to fade away at [code]distance_fade_max_distance[/code] "
-"and will fully disappear once it reaches [code]distance_fade_min_distance[/"
-"code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Specifies which type of fade to use. Can be any of the [enum "
-"DistanceFadeMode]s."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The emitted light's color. See [member emission_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the body emits light. Emitting light makes the object "
-"appear brighter. The object can also cast light on other objects if a "
-"[GIProbe] or [BakedLightmap] is used and this object is used in baked "
-"lighting."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The emitted light's strength. See [member emission_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Use [code]UV2[/code] to read from the [member emission_texture]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Sets how [member emission] interacts with [member emission_texture]. Can "
-"either add or multiply. See [enum EmissionOperator] for options."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture that specifies how much surface emits light at a given point."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Forces a conversion of the [member albedo_texture] from sRGB space to linear "
-"space."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Enables signed distance field rendering shader."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "If [code]true[/code], the object receives no ambient light."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the object receives no shadow that would otherwise be "
-"cast onto it."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the shader will compute extra operations to make sure "
-"the normal stays correct when using a non-uniform scale. Only enable if "
-"using non-uniform scaling."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the object is rendered at the same size regardless of "
-"distance."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], transparency is enabled on the body. See also [member "
-"params_blend_mode]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid "If [code]true[/code], the object is unaffected by lighting."
-msgstr "Wenn [code]true[/code], wird gerade [member animation]] abgespielt."
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], render point size can be changed.\n"
-"[b]Note:[/b] This is only effective for objects whose geometry is point-"
-"based rather than triangle-based. See also [member params_point_size]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], enables the \"shadow to opacity\" render mode where "
-"lighting modifies the alpha so shadowed areas are opaque and non-shadowed "
-"areas are transparent. Useful for overlaying shadows onto a camera feed in "
-"AR."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], lighting is calculated per vertex rather than per "
-"pixel. This may increase performance on low-end devices, especially for "
-"meshes with a lower polygon count. The downside is that shading becomes much "
-"less accurate, with visible linear interpolation between vertices that are "
-"joined together. This can be compensated by ensuring meshes have a "
-"sufficient level of subdivision (but not too much, to avoid reducing "
-"performance). Some material features are also not supported when vertex "
-"shading is enabled.\n"
-"See also [member ProjectSettings.rendering/quality/shading/"
-"force_vertex_shading] which can globally enable vertex shading on all "
-"materials.\n"
-"[b]Note:[/b] By default, vertex shading is enforced on mobile platforms by "
-"[member ProjectSettings.rendering/quality/shading/force_vertex_shading]'s "
-"[code]mobile[/code] override.\n"
-"[b]Note:[/b] [member flags_vertex_lighting] has no effect if [member "
-"flags_unshaded] is [code]true[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], triplanar mapping is calculated in world space rather "
-"than object local space. See also [member uv1_triplanar]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"A high value makes the material appear more like a metal. Non-metals use "
-"their albedo as the diffuse color and add diffuse to the specular "
-"reflection. With non-metals, the reflection appears on top of the albedo "
-"color. Metals use their albedo as a multiplier to the specular reflection "
-"and set the diffuse color to black resulting in a tinted reflection. "
-"Materials work better when fully metal or fully non-metal, values between "
-"[code]0[/code] and [code]1[/code] should only be used for blending between "
-"metal and non-metal sections. To alter the amount of reflection use [member "
-"roughness]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Sets the size of the specular lobe. The specular lobe is the bright spot "
-"that is reflected from light sources.\n"
-"[b]Note:[/b] Unlike [member metallic], this is not energy-conserving, so it "
-"should be left at [code]0.5[/code] in most cases. See also [member "
-"roughness]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to specify metallic for an object. This is multiplied by "
-"[member metallic]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Specifies the channel of the [member metallic_texture] in which the metallic "
-"information is stored. This is useful when you store the information for "
-"multiple effects in a single texture. For example if you stored metallic in "
-"the red channel, roughness in the blue, and ambient occlusion in the green "
-"you could reduce the number of textures you use."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "If [code]true[/code], normal mapping is enabled."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The strength of the normal map's effect."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to specify the normal at a given pixel. The "
-"[code]normal_texture[/code] only uses the red and green channels; the blue "
-"and alpha channels are ignored. The normal read from [code]normal_texture[/"
-"code] is oriented around the surface normal provided by the [Mesh].\n"
-"[b]Note:[/b] The mesh must have both normals and tangents defined in its "
-"vertex data. Otherwise, the normal map won't render correctly and will only "
-"appear to darken the whole surface. If creating geometry with [SurfaceTool], "
-"you can use [method SurfaceTool.generate_normals] and [method SurfaceTool."
-"generate_tangents] to automatically generate normals and tangents "
-"respectively.\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y+, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the shader will keep the scale set for the mesh. "
-"Otherwise the scale is lost when billboarding. Only applies when [member "
-"params_billboard_mode] is [constant BILLBOARD_ENABLED]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Controls how the object faces the camera. See [enum BillboardMode].\n"
-"[b]Note:[/b] Billboard mode is not suitable for VR because the left-right "
-"vector of the camera is not horizontal when the screen is attached to your "
-"head instead of on the table. See [url=https://github.com/godotengine/godot/"
-"issues/41567]GitHub issue #41567[/url] for details."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The material's blend mode.\n"
-"[b]Note:[/b] Values other than [code]Mix[/code] force the object into the "
-"transparent pipeline. See [enum BlendMode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Which side of the object is not drawn when backfaces are rendered. See [enum "
-"CullMode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Determines when depth rendering takes place. See [enum DepthDrawMode]. See "
-"also [member flags_transparent]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The algorithm used for diffuse light scattering. See [enum DiffuseMode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], enables the vertex grow setting. See [member "
-"params_grow_amount]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Grows object vertices in the direction of their normals."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid "Currently unimplemented in Godot."
-msgstr "zu Zeit ungenutzt."
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid "The point size in pixels. See [member flags_use_point_size]."
-msgstr ""
-"Gibt die minimale Größe dieses Controls zurück. Siehe [member rect_min_size]."
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The method for rendering the specular blob. See [enum SpecularMode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the shader will discard all pixels that have an alpha "
-"value less than [member params_alpha_scissor_threshold]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The number of horizontal frames in the particle sprite sheet. Only enabled "
-"when using [constant BILLBOARD_PARTICLES]. See [member "
-"params_billboard_mode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], particle animations are looped. Only enabled when "
-"using [constant BILLBOARD_PARTICLES]. See [member params_billboard_mode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The number of vertical frames in the particle sprite sheet. Only enabled "
-"when using [constant BILLBOARD_PARTICLES]. See [member "
-"params_billboard_mode]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Distance over which the fade effect takes place. The larger the distance the "
-"longer it takes for an object to fade."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the proximity fade effect is enabled. The proximity "
-"fade effect fades out each pixel based on its distance to another object."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the refraction effect is enabled. Refraction distorts "
-"transparency based on light from behind the object. When using the GLES3 "
-"backend, the material's roughness value will affect the blurriness of the "
-"refraction. Higher roughness values will make the refraction look blurrier."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The strength of the refraction effect. Higher values result in a more "
-"distorted appearance for the refraction."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture that controls the strength of the refraction per-pixel. Multiplied "
-"by [member refraction_scale]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Specifies the channel of the [member refraction_texture] in which the "
-"refraction information is stored. This is useful when you store the "
-"information for multiple effects in a single texture. For example if you "
-"stored metallic in the red channel, roughness in the blue, and ambient "
-"occlusion in the green you could reduce the number of textures you use."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Sets the strength of the rim lighting effect."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], rim effect is enabled. Rim lighting increases the "
-"brightness at glancing angles on an object.\n"
-"[b]Note:[/b] Rim lighting is not visible if the material has [member "
-"flags_unshaded] set to [code]true[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to set the strength of the rim lighting effect per-pixel. "
-"Multiplied by [member rim]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The amount of to blend light and albedo color when rendering rim effect. If "
-"[code]0[/code] the light color is used, while [code]1[/code] means albedo "
-"color is used. An intermediate value generally works best."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Surface reflection. A value of [code]0[/code] represents a perfect mirror "
-"while a value of [code]1[/code] completely blurs the reflection. See also "
-"[member metallic]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to control the roughness per-pixel. Multiplied by [member "
-"roughness]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], subsurface scattering is enabled. Emulates light that "
-"penetrates an object's surface, is scattered, and then emerges."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The strength of the subsurface scattering effect."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to control the subsurface scattering strength. Stored in the "
-"red texture channel. Multiplied by [member subsurf_scatter_strength]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The color used by the transmission effect. Represents the light passing "
-"through an object."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-#, fuzzy
-msgid "If [code]true[/code], the transmission effect is enabled."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture used to control the transmission effect per-pixel. Added to [member "
-"transmission]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"How much to offset the [code]UV[/code] coordinates. This amount will be "
-"added to [code]UV[/code] in the vertex function. This can be used to offset "
-"a texture."
-msgstr ""
-"Wie weit die [code]UV[/code] Koordinaten verschoben werden sollen. Dieser "
-"Wert wird in der Vertex Funktion zu den [code]UV[/code]'s addiert. Er kann "
-"zum verschieben einer Textur gennutzt werden."
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"How much to scale the [code]UV[/code] coordinates. This is multiplied by "
-"[code]UV[/code] in the vertex function."
-msgstr ""
-"Um wieviel die [code]UV[/code] Koordinaten vergrößert werden sollen. Dieser "
-"Wert wird in der Vertex Funktion mit den [code]UV[/code]'s multipiziert."
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], instead of using [code]UV[/code] textures will use a "
-"triplanar texture lookup to determine how to apply textures. Triplanar uses "
-"the orientation of the object's surface to blend between texture "
-"coordinates. It reads from the source texture 3 times, once for each axis "
-"and then blends between the results based on how closely the pixel aligns "
-"with each axis. This is often used for natural features to get a realistic "
-"blend of materials. Because triplanar texturing requires many more texture "
-"reads per-pixel it is much slower than normal UV texturing. Additionally, "
-"because it is blending the texture between the three axes, it is unsuitable "
-"when you are trying to achieve crisp texturing."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"A lower number blends the texture more softly while a higher number blends "
-"the texture more sharply."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"How much to offset the [code]UV2[/code] coordinates. This amount will be "
-"added to [code]UV2[/code] in the vertex function. This can be used to offset "
-"a texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"How much to scale the [code]UV2[/code] coordinates. This is multiplied by "
-"[code]UV2[/code] in the vertex function."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], instead of using [code]UV2[/code] textures will use a "
-"triplanar texture lookup to determine how to apply textures. Triplanar uses "
-"the orientation of the object's surface to blend between texture "
-"coordinates. It reads from the source texture 3 times, once for each axis "
-"and then blends between the results based on how closely the pixel aligns "
-"with each axis. This is often used for natural features to get a realistic "
-"blend of materials. Because triplanar texturing requires many more texture "
-"reads per-pixel it is much slower than normal UV texturing. Additionally, "
-"because it is blending the texture between the three axes, it is unsuitable "
-"when you are trying to achieve crisp texturing."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"If [code]true[/code], the model's vertex colors are processed as sRGB mode."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "If [code]true[/code], the vertex color is used as albedo color."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel color."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel metallic value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel roughness value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel emission color."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel normal vector."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel rim value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel clearcoat value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Texture specifying per-pixel flowmap direction for use with [member "
-"anisotropy]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel ambient occlusion value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel depth."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel subsurface scattering."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel transmission color."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel refraction strength."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel detail mask blending value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel detail color."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Texture specifying per-pixel detail normal."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Represents the size of the [enum TextureParam] enum."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Use [code]UV[/code] with the detail texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Use [code]UV2[/code] with the detail texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member flags_transparent]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member emission_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member normal_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member rim_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member clearcoat_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member anisotropy_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member ao_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member depth_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member subsurf_scatter_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member transmission_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member refraction_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Constant for setting [member detail_enabled]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Default blend mode. The color of the object is blended over the background "
-"based on the object's alpha value."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The color of the object is added to the background."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The color of the object is subtracted from the background."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The color of the object is multiplied by the background."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Default depth draw mode. Depth is drawn only for opaque objects."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Depth draw is calculated for both opaque and transparent objects."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "No depth draw."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"For transparent objects, an opaque pass is made first with the opaque parts, "
-"then transparency is drawn."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Default cull mode. The back of the object is culled when not visible."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The front of the object is culled when not visible."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "No culling is performed."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"No lighting is used on the object. Color comes directly from [code]ALBEDO[/"
-"code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Lighting is calculated per-vertex rather than per-pixel. This can be used to "
-"increase the speed of the shader at the cost of quality."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Set [code]ALBEDO[/code] to the per-vertex color specified in the mesh."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Vertex color is in sRGB space and needs to be converted to linear. Only "
-"applies in the GLES3 renderer."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Uses point size to alter the size of primitive points. Also changes the "
-"albedo texture lookup to use [code]POINT_COORD[/code] instead of [code]UV[/"
-"code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Object is scaled by depth so that it always appears the same size on screen."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Shader will keep the scale set for the mesh. Otherwise the scale is lost "
-"when billboarding. Only applies when [member params_billboard_mode] is "
-"[constant BILLBOARD_ENABLED]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Use triplanar texture lookup for all texture lookups that would normally use "
-"[code]UV[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Use triplanar texture lookup for all texture lookups that would normally use "
-"[code]UV2[/code]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Use [code]UV2[/code] coordinates to look up from the [member ao_texture]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Use [code]UV2[/code] coordinates to look up from the [member "
-"emission_texture]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Use alpha scissor. Set by [member params_use_alpha_scissor]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Use world coordinates in the triplanar texture lookup instead of local "
-"coordinates."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Forces the shader to convert albedo from sRGB space to linear space."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Disables receiving shadows from other objects."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Disables receiving ambient light."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Ensures that normals appear correct, even with non-uniform scaling."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Enables the shadow to opacity feature."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Default diffuse scattering algorithm."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Diffuse scattering ignores roughness."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Extends Lambert to cover more than 90 degrees when roughness increases."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Attempts to use roughness to emulate microsurfacing."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Uses a hard cut for lighting, with smoothing affected by roughness."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Default specular blob."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Older specular algorithm, included for compatibility."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Toon blob which changes size based on roughness."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "No specular blob."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Billboard mode is disabled."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The object's Z axis will always face the camera."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "The object's X axis will always face the camera."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Used for particle systems when assigned to [Particles] and [CPUParticles] "
-"nodes. Enables [code]particles_anim_*[/code] properties.\n"
-"The [member ParticlesMaterial.anim_speed] or [member CPUParticles."
-"anim_speed] should also be set to a positive value for the animation to play."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Used to read from the red channel of a texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Used to read from the green channel of a texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Used to read from the blue channel of a texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Used to read from the alpha channel of a texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Adds the emission color to the color from the emission texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Multiplies the emission color by the color from the emission texture."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid "Do not use distance fade."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Smoothly fades the object out based on each pixel's distance from the camera "
-"using the alpha channel."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Smoothly fades the object out based on each pixel's distance from the camera "
-"using a dither approach. Dithering discards pixels based on a set pattern to "
-"smoothly fade without enabling transparency. On certain hardware this can be "
-"faster than [constant DISTANCE_FADE_PIXEL_ALPHA]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Smoothly fades the object out based on the object's distance from the camera "
-"using a dither approach. Dithering discards pixels based on a set pattern to "
-"smoothly fade without enabling transparency. On certain hardware this can be "
-"faster than [constant DISTANCE_FADE_PIXEL_ALPHA]."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"The real conditioned shader needed on each situation will be sent for "
-"background compilation. In the meantime, a very complex shader that adapts "
-"to every situation will be used (\"ubershader\"). This ubershader is much "
-"slower to render, but will keep the game running without stalling to "
-"compile. Once shader compilation is done, the ubershader is replaced by the "
-"traditional optimized shader."
-msgstr ""
-
-#: doc/classes/SpatialMaterial.xml
-msgid ""
-"Anything with this material applied won't be rendered while this material's "
-"shader is being compiled.\n"
-"This is useful for optimization, in cases where the visuals won't suffer "
-"from having certain non-essential elements missing during the short time "
-"their shaders are being compiled."
-msgstr ""
-
-#: doc/classes/SphereMesh.xml
-msgid "Class representing a spherical [PrimitiveMesh]."
-msgstr ""
-
-#: doc/classes/SphereMesh.xml
-msgid "Full height of the sphere."
-msgstr ""
-
-#: doc/classes/SphereMesh.xml
-msgid ""
-"If [code]true[/code], a hemisphere is created rather than a full sphere.\n"
-"[b]Note:[/b] To get a regular hemisphere, the height and radius of the "
-"sphere must be equal."
-msgstr ""
-
-#: doc/classes/SphereMesh.xml
-msgid "Number of radial segments on the sphere."
-msgstr ""
-
-#: doc/classes/SphereMesh.xml
-msgid "Radius of sphere."
-msgstr ""
-
-#: doc/classes/SphereMesh.xml
-msgid "Number of segments along the height of the sphere."
-msgstr ""
-
-#: doc/classes/SphereShape.xml
-msgid "Sphere shape for 3D collisions."
-msgstr ""
-
-#: doc/classes/SphereShape.xml
-msgid ""
-"Sphere shape for 3D collisions, which can be set into a [PhysicsBody] or "
-"[Area]. This shape is useful for modeling sphere-like 3D objects."
-msgstr ""
-
-#: doc/classes/SphereShape.xml
-msgid "The sphere's radius. The shape's diameter is double the radius."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid "Numerical input text field."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid ""
-"SpinBox is a numerical input text field. It allows entering integers and "
-"floats.\n"
-"[b]Example:[/b]\n"
-"[codeblock]\n"
-"var spin_box = SpinBox.new()\n"
-"add_child(spin_box)\n"
-"var line_edit = spin_box.get_line_edit()\n"
-"line_edit.context_menu_enabled = false\n"
-"spin_box.align = LineEdit.ALIGN_RIGHT\n"
-"[/codeblock]\n"
-"The above code will create a [SpinBox], disable context menu on it and set "
-"the text alignment to right.\n"
-"See [Range] class for more options over the [SpinBox].\n"
-"[b]Note:[/b] [SpinBox] relies on an underlying [LineEdit] node. To theme a "
-"[SpinBox]'s background, add theme items for [LineEdit] and customize them.\n"
-"[b]Note:[/b] If you want to implement drag and drop for the underlying "
-"[LineEdit], you can use [method Control.set_drag_forwarding] on the node "
-"returned by [method get_line_edit]."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid "Applies the current value of this [SpinBox]."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid ""
-"Returns the [LineEdit] instance from this [SpinBox]. You can use it to "
-"access properties and methods of [LineEdit].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid "Sets the text alignment of the [SpinBox]."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid ""
-"If [code]true[/code], the [SpinBox] will be editable. Otherwise, it will be "
-"read only."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid ""
-"Adds the specified [code]prefix[/code] string before the numerical value of "
-"the [SpinBox]."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid ""
-"Adds the specified [code]suffix[/code] string after the numerical value of "
-"the [SpinBox]."
-msgstr ""
-
-#: doc/classes/SpinBox.xml
-msgid "Sets a custom [Texture] for up and down arrows of the [SpinBox]."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid "Container for splitting and adjusting."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid ""
-"Container for splitting two [Control]s vertically or horizontally, with a "
-"grabber that allows adjusting the split offset or ratio."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid ""
-"Clamps the [member split_offset] value to not go outside the currently "
-"possible minimal and maximum values."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid ""
-"If [code]true[/code], the area of the first [Control] will be collapsed and "
-"the dragger will be disabled."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid ""
-"Determines the dragger's visibility. See [enum DraggerVisibility] for "
-"details."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid ""
-"The initial offset of the splitting between the two [Control]s, with "
-"[code]0[/code] being at the end of the first [Control]."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid "Emitted when the dragger is dragged by user."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid "The split dragger is visible when the cursor hovers it."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid "The split dragger is never visible."
-msgstr ""
-
-#: doc/classes/SplitContainer.xml
-msgid "The split dragger is never visible and its space collapsed."
-msgstr ""
-
-#: doc/classes/SpotLight.xml
-msgid "A spotlight, such as a reflector spotlight or a lantern."
-msgstr ""
-
-#: doc/classes/SpotLight.xml
-msgid ""
-"A Spotlight is a type of [Light] node that emits lights in a specific "
-"direction, in the shape of a cone. The light is attenuated through the "
-"distance. This attenuation can be configured by changing the energy, radius "
-"and attenuation parameters of [Light].\n"
-"[b]Note:[/b] By default, only 32 SpotLights may affect a single mesh "
-"[i]resource[/i] at once. Consider splitting your level into several meshes "
-"to decrease the likelihood that more than 32 lights will affect the same "
-"mesh resource. Splitting the level mesh will also improve frustum culling "
-"effectiveness, leading to greater performance. If you need to use more "
-"lights per mesh, you can increase [member ProjectSettings.rendering/limits/"
-"rendering/max_lights_per_object] at the cost of shader compilation times."
-msgstr ""
-
-#: doc/classes/SpotLight.xml
-msgid ""
-"The spotlight's angle in degrees.\n"
-"[b]Note:[/b] [member spot_angle] is not affected by [member Spatial.scale] "
-"(the light's scale or its parent's scale)."
-msgstr ""
-
-#: doc/classes/SpotLight.xml
-msgid "The spotlight's angular attenuation curve."
-msgstr ""
-
-#: doc/classes/SpotLight.xml
-msgid "The spotlight's light energy attenuation curve."
-msgstr ""
-
-#: doc/classes/SpotLight.xml
-msgid ""
-"The maximal range that can be reached by the spotlight. Note that the "
-"effectively lit area may appear to be smaller depending on the [member "
-"spot_attenuation] in use. No matter the [member spot_attenuation] in use, "
-"the light will never reach anything outside this range.\n"
-"[b]Note:[/b] [member spot_range] is not affected by [member Spatial.scale] "
-"(the light's scale or its parent's scale)."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid "A helper node, mostly used in 3rd person cameras."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"The SpringArm node is a node that casts a ray (or collision shape) along its "
-"z axis and moves all its direct children to the collision point, minus a "
-"margin.\n"
-"The most common use case for this is to make a 3rd person camera that reacts "
-"to collisions in the environment.\n"
-"The SpringArm will either cast a ray, or if a shape is given, it will cast "
-"the shape in the direction of its z axis.\n"
-"If you use the SpringArm as a camera controller for your player, you might "
-"need to exclude the player's collider from the SpringArm's collision check."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"Adds the [PhysicsBody] object with the given [RID] to the list of "
-"[PhysicsBody] objects excluded from the collision check."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"Clears the list of [PhysicsBody] objects excluded from the collision check."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid "Returns the spring arm's current length."
-msgstr "Gibt die aktuelle Länge des Federarms zurück."
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"Removes the given [RID] from the list of [PhysicsBody] objects excluded from "
-"the collision check."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"The layers against which the collision check shall be done. See "
-"[url=$DOCS_URL/tutorials/physics/physics_introduction.html#collision-layers-"
-"and-masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"When the collision check is made, a candidate length for the SpringArm is "
-"given.\n"
-"The margin is then subtracted to this length and the translation is applied "
-"to the child objects of the SpringArm.\n"
-"This margin is useful for when the SpringArm has a [Camera] as a child node: "
-"without the margin, the [Camera] would be placed on the exact point of "
-"collision, while with the margin the [Camera] would be placed close to the "
-"point of collision."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"The [Shape] to use for the SpringArm.\n"
-"When the shape is set, the SpringArm will cast the [Shape] on its z axis "
-"instead of performing a ray cast."
-msgstr ""
-
-#: doc/classes/SpringArm.xml
-msgid ""
-"The maximum extent of the SpringArm. This is used as a length for both the "
-"ray and the shape cast used internally to calculate the desired position of "
-"the SpringArm's child nodes.\n"
-"To know more about how to perform a shape cast or a ray cast, please consult "
-"the [PhysicsDirectSpaceState] documentation."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid "General-purpose sprite node."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid ""
-"A node that displays a 2D texture. The texture displayed can be a region "
-"from a larger atlas texture, or a frame from a sprite sheet animation."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid ""
-"Returns a [Rect2] representing the Sprite's boundary in local coordinates. "
-"Can be used to detect if the Sprite was clicked. Example:\n"
-"[codeblock]\n"
-"func _input(event):\n"
-"    if event is InputEventMouseButton and event.pressed and event."
-"button_index == BUTTON_LEFT:\n"
-"        if get_rect().has_point(to_local(event.position)):\n"
-"            print(\"A click!\")\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid ""
-"Returns [code]true[/code], if the pixel at the given position is opaque and "
-"[code]false[/code] in other case.\n"
-"[b]Note:[/b] It also returns [code]false[/code], if the sprite's texture is "
-"[code]null[/code] or if the given position is invalid."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid "If [code]true[/code], texture is centered."
-msgstr ""
-
-#: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
-msgid ""
-"Current frame to display from sprite sheet. [member hframes] or [member "
-"vframes] must be greater than 1."
-msgstr ""
-
-#: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
-msgid ""
-"Coordinates of the frame to display from sprite sheet. This is as an alias "
-"for the [member frame] property. [member hframes] or [member vframes] must "
-"be greater than 1."
-msgstr ""
-
-#: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
-msgid "The number of columns in the sprite sheet."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid ""
-"The normal map gives depth to the Sprite.\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y-, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid ""
-"If [code]true[/code], texture is cut from a larger atlas texture. See "
-"[member region_rect]."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid "If [code]true[/code], the outermost pixels get blurred out."
-msgstr ""
-
-#: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
-msgid ""
-"The region of the atlas texture to display. [member region_enabled] must be "
-"[code]true[/code]."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid "[Texture] object to draw."
-msgstr ""
-
-#: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
-msgid "The number of rows in the sprite sheet."
-msgstr ""
-
-#: doc/classes/Sprite.xml doc/classes/Sprite3D.xml
-msgid "Emitted when the [member frame] changes."
-msgstr ""
-
-#: doc/classes/Sprite.xml
-msgid "Emitted when the [member texture] changes."
-msgstr ""
-
-#: doc/classes/Sprite3D.xml
-msgid "2D sprite node in a 3D world."
-msgstr ""
-
-#: doc/classes/Sprite3D.xml
-msgid ""
-"A node that displays a 2D texture in a 3D environment. The texture displayed "
-"can be a region from a larger atlas texture, or a frame from a sprite sheet "
-"animation."
-msgstr ""
-
-#: doc/classes/Sprite3D.xml
-msgid ""
-"If [code]true[/code], texture will be cut from a larger atlas texture. See "
-"[member region_rect]."
-msgstr ""
-
-#: doc/classes/Sprite3D.xml
-msgid ""
-"[Texture] object to draw. If [member GeometryInstance.material_override] is "
-"used, this will be overridden. The size information is still used."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "2D sprite node in 3D environment."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "A node that displays 2D texture information in a 3D environment."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "Returns the rectangle representing this sprite."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "If [code]true[/code], the specified flag will be enabled."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "The direction in which the front of the texture faces."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"If [code]true[/code], texture can be seen from the back as well, if "
-"[code]false[/code], it is invisible when looking at it from behind."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"A color value used to [i]multiply[/i] the texture's colors. Can be used for "
-"mood-coloring or to simulate the color of light.\n"
-"[b]Note:[/b] If a [member GeometryInstance.material_override] is defined on "
-"the [SpriteBase3D], the material override must be configured to take vertex "
-"colors into account for albedo. Otherwise, the color defined in [member "
-"modulate] will be ignored. For a [SpatialMaterial], [member SpatialMaterial."
-"vertex_color_use_as_albedo] must be [code]true[/code]. For a "
-"[ShaderMaterial], [code]ALBEDO *= COLOR.rgb;[/code] must be inserted in the "
-"shader's [code]fragment()[/code] function."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"The texture's visibility on a scale from [code]0[/code] (fully invisible) to "
-"[code]1[/code] (fully visible). [member opacity] is a multiplier for the "
-"[member modulate] color's alpha channel.\n"
-"[b]Note:[/b] If a [member GeometryInstance.material_override] is defined on "
-"the [SpriteBase3D], the material override must be configured to take vertex "
-"colors into account for albedo. Otherwise, the opacity defined in [member "
-"opacity] will be ignored. For a [SpatialMaterial], [member SpatialMaterial."
-"vertex_color_use_as_albedo] must be [code]true[/code]. For a "
-"[ShaderMaterial], [code]ALPHA *= COLOR.a;[/code] must be inserted in the "
-"shader's [code]fragment()[/code] function."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "The size of one pixel's width on the sprite to scale it in 3D."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"Sets the render priority for the sprite. Higher priority objects will be "
-"sorted in front of lower priority objects.\n"
-"[b]Note:[/b] This only applies if [member alpha_cut] is set to [constant "
-"ALPHA_CUT_DISABLED] (default value).\n"
-"[b]Note:[/b] This only applies to sorting of transparent objects. This will "
-"not impact how transparent objects are sorted relative to opaque objects. "
-"This is because opaque objects are not sorted, while transparent objects are "
-"sorted from back to front (subject to priority)."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the [Light] in the [Environment] has effects on the "
-"sprite."
-msgstr ""
-"Wenn [code]true[/code], können andere Überwachungsbereiche diesen Bereich "
-"erkennen."
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"If [code]true[/code], the texture's transparency and the opacity are used to "
-"make those parts of the sprite invisible."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"If set, the texture's transparency and the opacity are used to make those "
-"parts of the sprite invisible."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid "If set, lights in the environment affect the sprite."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"If set, texture can be seen from the back as well, if not, it is invisible "
-"when looking at it from behind."
-msgstr ""
-
-#: doc/classes/SpriteBase3D.xml
-msgid ""
-"Sprite is scaled by depth so that it always appears the same size on screen."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Sprite frame library for AnimatedSprite and AnimatedSprite3D."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid ""
-"Sprite frame library for an [AnimatedSprite] or [AnimatedSprite3D] node. "
-"Contains frames and animation data for playback.\n"
-"[b]Note:[/b] You can associate a set of normal maps by creating additional "
-"[SpriteFrames] resources with a [code]_normal[/code] suffix. For example, "
-"having 2 [SpriteFrames] resources [code]run[/code] and [code]run_normal[/"
-"code] will make it so the [code]run[/code] animation uses the normal map."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Adds a new animation to the library."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Adds a frame to the given animation."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Removes all frames from the given animation."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Removes all animations. A \"default\" animation will be created."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the given animation is configured to loop when "
-"it finishes playing. Otherwise, returns [code]false[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der angegebene Track importiert ist. "
-"Andernfalls wird [code]false[/code] zurückgegeben."
-
-#: doc/classes/SpriteFrames.xml
-msgid ""
-"Returns an array containing the names associated to each animation. Values "
-"are placed in alphabetical order."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "The animation's speed in frames per second."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Returns the animation's selected frame."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Returns the number of frames in the animation."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "If [code]true[/code], the named animation exists."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Removes the given animation."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Removes the animation's selected frame."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Changes the animation's name to [code]newname[/code]."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "If [code]true[/code], the animation will loop."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Sets the texture of the given frame."
-msgstr ""
-
-#: doc/classes/SpriteFrames.xml
-msgid "Compatibility property, always equals to an empty array."
-msgstr ""
-
-#: doc/classes/StaticBody.xml
-msgid "Static body for 3D physics."
-msgstr ""
-
-#: doc/classes/StaticBody.xml
-msgid ""
-"Static body for 3D physics. A static body is a simple body that is not "
-"intended to move. In contrast to [RigidBody], they don't consume any CPU "
-"resources as long as they don't move.\n"
-"Additionally, a constant linear or angular velocity can be set for the "
-"static body, so even if it doesn't move, it affects other bodies as if it "
-"was moving (this is useful for simulating conveyor belts or conveyor wheels)."
-msgstr ""
-
-#: doc/classes/StaticBody.xml
-msgid ""
-"The body's constant angular velocity. This does not rotate the body, but "
-"affects other bodies that touch it, as if it was in a state of rotation."
-msgstr ""
-
-#: doc/classes/StaticBody.xml
-msgid ""
-"The body's constant linear velocity. This does not move the body, but "
-"affects other bodies that touch it, as if it was in a state of movement."
-msgstr ""
-
-#: doc/classes/StaticBody.xml
-msgid ""
-"The body's friction, from 0 (frictionless) to 1 (full friction).\n"
-"Deprecated, use [member PhysicsMaterial.friction] instead via [member "
-"physics_material_override]."
-msgstr ""
-
-#: doc/classes/StaticBody2D.xml
-msgid "Static body for 2D physics."
-msgstr ""
-
-#: doc/classes/StaticBody2D.xml
-msgid ""
-"Static body for 2D physics. A StaticBody2D is a body that is not intended to "
-"move. It is ideal for implementing objects in the environment, such as walls "
-"or platforms.\n"
-"Additionally, a constant linear or angular velocity can be set for the "
-"static body, which will affect colliding bodies as if it were moving (for "
-"example, a conveyor belt)."
-msgstr ""
-
-#: doc/classes/StaticBody2D.xml
-msgid ""
-"The body's constant angular velocity. This does not rotate the body, but "
-"affects colliding bodies, as if it were rotating."
-msgstr ""
-
-#: doc/classes/StaticBody2D.xml
-msgid ""
-"The body's constant linear velocity. This does not move the body, but "
-"affects colliding bodies, as if it were moving."
-msgstr ""
-
-#: doc/classes/StaticBody2D.xml
-msgid ""
-"The body's friction. Values range from [code]0[/code] (no friction) to "
-"[code]1[/code] (full friction).\n"
-"Deprecated, use [member PhysicsMaterial.friction] instead via [member "
-"physics_material_override]."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Abstraction and base class for stream-based protocols."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"StreamPeer is an abstraction and base class for stream-based protocols (such "
-"as TCP). It provides an API for sending and receiving data through streams "
-"as raw data or strings."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets a signed 16-bit value from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets a signed 32-bit value from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets a signed 64-bit value from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets a signed byte from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Returns the amount of bytes this [StreamPeer] has available."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Returns a chunk data with the received bytes. The amount of bytes to be "
-"received can be requested in the [code]bytes[/code] argument. If not enough "
-"bytes are available, the function will block until the desired amount is "
-"received. This function returns two values, an [enum @GlobalScope.Error] "
-"code and a data array."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets a double-precision float from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets a single-precision float from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Returns a chunk data with the received bytes. The amount of bytes to be "
-"received can be requested in the \"bytes\" argument. If not enough bytes are "
-"available, the function will return how many were actually received. This "
-"function returns two values, an [enum @GlobalScope.Error] code, and a data "
-"array."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Gets an ASCII string with byte-length [code]bytes[/code] from the stream. If "
-"[code]bytes[/code] is negative (default) the length will be read from the "
-"stream using the reverse process of [method put_string]."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets an unsigned 16-bit value from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets an unsigned 32-bit value from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets an unsigned 64-bit value from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Gets an unsigned byte from the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Gets an UTF-8 string with byte-length [code]bytes[/code] from the stream "
-"(this decodes the string sent as UTF-8). If [code]bytes[/code] is negative "
-"(default) the length will be read from the stream using the reverse process "
-"of [method put_utf8_string]."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Gets a Variant from the stream. If [code]allow_objects[/code] is [code]true[/"
-"code], decoding objects is allowed.\n"
-"[b]Warning:[/b] Deserialized objects can contain code which gets executed. "
-"Do not use this option if the serialized object comes from untrusted sources "
-"to avoid potential security threats such as remote code execution."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts a signed 16-bit value into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts a signed 32-bit value into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts a signed 64-bit value into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts a signed byte into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Sends a chunk of data through the connection, blocking if necessary until "
-"the data is done sending. This function returns an [enum @GlobalScope.Error] "
-"code."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts a double-precision float into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts a single-precision float into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Sends a chunk of data through the connection. If all the data could not be "
-"sent at once, only part of it will. This function returns two values, an "
-"[enum @GlobalScope.Error] code and an integer, describing how much data was "
-"actually sent."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Puts a zero-terminated ASCII string into the stream prepended by a 32-bit "
-"unsigned integer representing its size.\n"
-"[b]Note:[/b] To put an ASCII string without prepending its size, you can use "
-"[method put_data]:\n"
-"[codeblock]\n"
-"put_data(\"Hello world\".to_ascii())\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts an unsigned 16-bit value into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts an unsigned 32-bit value into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts an unsigned 64-bit value into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid "Puts an unsigned byte into the stream."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Puts a zero-terminated UTF-8 string into the stream prepended by a 32 bits "
-"unsigned integer representing its size.\n"
-"[b]Note:[/b] To put an UTF-8 string without prepending its size, you can use "
-"[method put_data]:\n"
-"[codeblock]\n"
-"put_data(\"Hello world\".to_utf8())\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"Puts a Variant into the stream. If [code]full_objects[/code] is [code]true[/"
-"code] encoding objects is allowed (and can potentially include code)."
-msgstr ""
-
-#: doc/classes/StreamPeer.xml
-msgid ""
-"If [code]true[/code], this [StreamPeer] will using big-endian format for "
-"encoding and decoding."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid "Data buffer stream peer."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid ""
-"Data buffer stream peer that uses a byte array as the stream. This object "
-"can be used to handle binary data from network sessions. To handle binary "
-"data stored in files, [File] can be used directly.\n"
-"A [StreamPeerBuffer] object keeps an internal cursor which is the offset in "
-"bytes to the start of the buffer. Get and put operations are performed at "
-"the cursor position and will move the cursor accordingly."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid "Clears the [member data_array] and resets the cursor."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid ""
-"Returns a new [StreamPeerBuffer] with the same [member data_array] content."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-#, fuzzy
-msgid "Returns the current cursor position."
-msgstr "Gibt den gegebenen Übergang zurück."
-
-#: doc/classes/StreamPeerBuffer.xml
-#, fuzzy
-msgid "Returns the size of [member data_array]."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid "Resizes the [member data_array]. This [i]doesn't[/i] update the cursor."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid ""
-"Moves the cursor to the specified position. [code]position[/code] must be a "
-"valid index of [member data_array]."
-msgstr ""
-
-#: doc/classes/StreamPeerBuffer.xml
-msgid "The underlying data buffer. Setting this value resets the cursor."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid "SSL stream peer."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid ""
-"SSL stream peer. This object can be used to connect to an SSL server or "
-"accept a single SSL client connection."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid ""
-"Accepts a peer connection as a server using the given [code]private_key[/"
-"code] and providing the given [code]certificate[/code] to the client. You "
-"can pass the optional [code]chain[/code] parameter to provide additional CA "
-"chain information along with the certificate."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid ""
-"Connects to a peer using an underlying [StreamPeer] [code]stream[/code]. If "
-"[code]validate_certs[/code] is [code]true[/code], [StreamPeerSSL] will "
-"validate that the certificate presented by the peer matches the "
-"[code]for_hostname[/code].\n"
-"[b]Note:[/b] Specifying a custom [code]valid_certificate[/code] is not "
-"supported in HTML5 exports due to browsers restrictions."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml doc/classes/StreamPeerTCP.xml
-msgid "Disconnects from host."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid ""
-"Poll the connection to check for incoming bytes. Call this right before "
-"[method StreamPeer.get_available_bytes] for it to work properly."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid "A status representing a [StreamPeerSSL] that is disconnected."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid "A status representing a [StreamPeerSSL] during handshaking."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid "A status representing a [StreamPeerSSL] that is connected to a host."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid "A status representing a [StreamPeerSSL] in error state."
-msgstr ""
-
-#: doc/classes/StreamPeerSSL.xml
-msgid ""
-"An error status that shows a mismatch in the SSL certificate domain "
-"presented by the host and the domain requested for validation."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "TCP stream peer."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid ""
-"TCP stream peer. This object can be used to connect to TCP servers, or also "
-"is returned by a TCP server."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid ""
-"Connects to the specified [code]host:port[/code] pair. A hostname will be "
-"resolved if valid. Returns [constant OK] on success or [constant FAILED] on "
-"failure."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "Returns the IP of this peer."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "Returns the port of this peer."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "Returns the status of the connection, see [enum Status]."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if this peer is currently connected or is "
-"connecting to a host, [code]false[/code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn die Mono Laufzeit sich beendet, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/StreamPeerTCP.xml
-msgid ""
-"If [code]enabled[/code] is [code]true[/code], packets will be sent "
-"immediately. If [code]enabled[/code] is [code]false[/code] (the default), "
-"packet transfers will be delayed and combined using [url=https://en."
-"wikipedia.org/wiki/Nagle%27s_algorithm]Nagle's algorithm[/url].\n"
-"[b]Note:[/b] It's recommended to leave this disabled for applications that "
-"send large packets or need to transfer a lot of data, as enabling this can "
-"decrease the total available bandwidth."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid ""
-"The initial status of the [StreamPeerTCP]. This is also the status after "
-"disconnecting."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "A status representing a [StreamPeerTCP] that is connecting to a host."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "A status representing a [StreamPeerTCP] that is connected to a host."
-msgstr ""
-
-#: doc/classes/StreamPeerTCP.xml
-msgid "A status representing a [StreamPeerTCP] in error state."
-msgstr ""
-
-#: doc/classes/StreamTexture.xml
-msgid "A [code].stex[/code] texture."
-msgstr ""
-
-#: doc/classes/StreamTexture.xml
-msgid "A texture that is loaded from a [code].stex[/code] file."
-msgstr ""
-
-#: doc/classes/StreamTexture.xml
-msgid "Loads the texture from the given path."
-msgstr ""
-
-#: doc/classes/StreamTexture.xml
-msgid "The StreamTexture's file path to a [code].stex[/code] file."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Built-in string class."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"This is the built-in string class (and the one used by GDScript). It "
-"supports Unicode and provides all necessary means for string handling. "
-"Strings are reference-counted and use a copy-on-write approach, so passing "
-"them around is cheap in resources."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [bool]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [int]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [float]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Vector2]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Rect2]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Vector3]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Transform2D]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Plane]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Quat]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [AABB]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Basis]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Transform]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Color]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [NodePath]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [RID]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Dictionary]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Constructs a new String from the given [Array]."
-msgstr ""
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolByteArray]."
-msgstr ""
-"Erzeugt einen neuen [Vector2] aus den übergeben [code]x[/code] und [code]y[/"
-"code]."
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolIntArray]."
-msgstr ""
-"Erzeugt einen neuen [Vector2] aus den übergeben [code]x[/code] und [code]y[/"
-"code]."
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolRealArray]."
-msgstr ""
-"Erzeugt einen neuen [Vector2] aus den übergeben [code]x[/code] und [code]y[/"
-"code]."
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolStringArray]."
-msgstr ""
-"Erzeugt einen neuen [Vector2] aus den übergeben [code]x[/code] und [code]y[/"
-"code]."
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolVector2Array]."
-msgstr "Erzeugt einen neuen [Vector2] aus einem [Vector2i]."
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolVector3Array]."
-msgstr "Erzeugt einen neuen [Vector2] aus einem [Vector2i]."
-
-#: doc/classes/String.xml
-#, fuzzy
-msgid "Constructs a new String from the given [PoolColorArray]."
-msgstr ""
-"Erzeugt einen neuen [Vector2] aus den übergeben [code]x[/code] und [code]y[/"
-"code]."
-
-#: doc/classes/String.xml
-msgid "Returns [code]true[/code] if the string begins with the given string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns an array containing the bigrams (pairs of consecutive letters) of "
-"this string.\n"
-"[codeblock]\n"
-"print(\"Bigrams\".bigrams()) # Prints \"[Bi, ig, gr, ra, am, ms]\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with special characters escaped using the C "
-"language standard."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with escaped characters replaced by their "
-"meanings. Supported escape sequences are [code]\\'[/code], [code]\\\"[/"
-"code], [code]\\?[/code], [code]\\\\[/code], [code]\\a[/code], [code]\\b[/"
-"code], [code]\\f[/code], [code]\\n[/code], [code]\\r[/code], [code]\\t[/"
-"code], [code]\\v[/code].\n"
-"[b]Note:[/b] Unlike the GDScript parser, this method doesn't support the "
-"[code]\\uXXXX[/code] escape sequence."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Changes the case of some letters. Replaces underscores with spaces, adds "
-"spaces before in-word uppercase characters, converts all letters to "
-"lowercase, then capitalizes the first letter and every letter following a "
-"space character. For [code]capitalize camelCase mixed_with_underscores[/"
-"code], it will return [code]Capitalize Camel Case Mixed With Underscores[/"
-"code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Performs a case-sensitive comparison to another string. Returns [code]-1[/"
-"code] if less than, [code]1[/code] if greater than, or [code]0[/code] if "
-"equal. \"less than\" or \"greater than\" are determined by the [url=https://"
-"en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode code points[/url] "
-"of each string, which roughly matches the alphabetical order.\n"
-"[b]Behavior with different string lengths:[/b] Returns [code]1[/code] if the "
-"\"base\" string is longer than the [code]to[/code] string or [code]-1[/code] "
-"if the \"base\" string is shorter than the [code]to[/code] string. Keep in "
-"mind this length is determined by the number of Unicode codepoints, [i]not[/"
-"i] the actual visible characters.\n"
-"[b]Behavior with empty strings:[/b] Returns [code]-1[/code] if the \"base\" "
-"string is empty, [code]1[/code] if the [code]to[/code] string is empty or "
-"[code]0[/code] if both strings are empty.\n"
-"To get a boolean result from a string comparison, use the [code]==[/code] "
-"operator instead. See also [method nocasecmp_to]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns the number of occurrences of substring [code]what[/code] between "
-"[code]from[/code] and [code]to[/code] positions. If [code]from[/code] and "
-"[code]to[/code] equals 0 the whole string will be used. If only [code]to[/"
-"code] equals 0 the remained substring will be used."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns the number of occurrences of substring [code]what[/code] (ignoring "
-"case) between [code]from[/code] and [code]to[/code] positions. If "
-"[code]from[/code] and [code]to[/code] equals 0 the whole string will be "
-"used. If only [code]to[/code] equals 0 the remained substring will be used."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with indentation (leading tabs and spaces) "
-"removed. See also [method indent] to add indentation."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if the length of the string equals [code]0[/code]."
-msgstr ""
-"Liefert [code]true[/code] wenn die Länge der Zeichenkette [code]0[/code] ist."
-
-#: doc/classes/String.xml
-msgid "Returns [code]true[/code] if the string ends with the given string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Erases [code]chars[/code] characters from the string starting from "
-"[code]position[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Finds the first occurrence of a substring. Returns the starting position of "
-"the substring or [code]-1[/code] if not found. Optionally, the initial "
-"search index can be passed.\n"
-"[b]Note:[/b] If you just want to know whether a string contains a substring, "
-"use the [code]in[/code] operator as follows:\n"
-"[codeblock]\n"
-"# Will evaluate to `false`.\n"
-"if \"i\" in \"team\":\n"
-"    pass\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Finds the last occurrence of a substring. Returns the starting position of "
-"the substring or [code]-1[/code] if not found."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Finds the first occurrence of a substring, ignoring case. Returns the "
-"starting position of the substring or [code]-1[/code] if not found. "
-"Optionally, the initial search index can be passed."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Formats the string by replacing all occurrences of [code]placeholder[/code] "
-"with the elements of [code]values[/code].\n"
-"[code]values[/code] can be a [Dictionary] or an [Array]. Any underscores in "
-"[code]placeholder[/code] will be replaced with the corresponding keys in "
-"advance. Array elements use their index as keys.\n"
-"[codeblock]\n"
-"# Prints: Waiting for Godot is a play by Samuel Beckett, and Godot Engine is "
-"named after it.\n"
-"var use_array_values = \"Waiting for {0} is a play by {1}, and {0} Engine is "
-"named after it.\"\n"
-"print(use_array_values.format([\"Godot\", \"Samuel Beckett\"]))\n"
-"\n"
-"# Prints: User 42 is Godot.\n"
-"print(\"User {id} is {name}.\".format({\"id\": 42, \"name\": \"Godot\"}))\n"
-"[/codeblock]\n"
-"Some additional handling is performed when [code]values[/code] is an array. "
-"If [code]placeholder[/code] does not contain an underscore, the elements of "
-"the array will be used to replace one occurrence of the placeholder in turn; "
-"If an array element is another 2-element array, it'll be interpreted as a "
-"key-value pair.\n"
-"[codeblock]\n"
-"# Prints: User 42 is Godot.\n"
-"print(\"User {} is {}.\".format([42, \"Godot\"], \"{}\"))\n"
-"print(\"User {id} is {name}.\".format([[\"id\", 42], [\"name\", "
-"\"Godot\"]]))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "If the string is a valid file path, returns the base directory name."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"If the string is a valid file path, returns the full file path without the "
-"extension."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns the extension without the leading period character ([code].[/code]) "
-"if the string is a valid file name or path. If the string does not contain "
-"an extension, returns an empty string instead.\n"
-"[codeblock]\n"
-"print(\"/path/to/file.txt\".get_extension())  # \"txt\"\n"
-"print(\"file.txt\".get_extension())  # \"txt\"\n"
-"print(\"file.sample.txt\".get_extension())  # \"txt\"\n"
-"print(\".txt\".get_extension())  # \"txt\"\n"
-"print(\"file.txt.\".get_extension())  # \"\" (empty string)\n"
-"print(\"file.txt..\".get_extension())  # \"\" (empty string)\n"
-"print(\"txt\".get_extension())  # \"\" (empty string)\n"
-"print(\"\".get_extension())  # \"\" (empty string)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "If the string is a valid file path, returns the filename."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Splits a string using a [code]delimiter[/code] and returns a substring at "
-"index [code]slice[/code]. Returns an empty string if the index doesn't "
-"exist.\n"
-"This is a more performant alternative to [method split] for cases when you "
-"need only one element from the array at a fixed index.\n"
-"Example:\n"
-"[codeblock]\n"
-"print(\"i/am/example/string\".get_slice(\"/\", 2)) # Prints 'example'.\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns the 32-bit hash value representing the string's contents.\n"
-"[b]Note:[/b] [String]s with equal content will always produce identical hash "
-"values. However, the reverse is not true. Returning identical hash values "
-"does [i]not[/i] imply the strings are equal, because different strings can "
-"have identical hash values due to hash collisions."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Converts a string containing a hexadecimal number into an integer. "
-"Hexadecimal strings are expected to be prefixed with \"[code]0x[/code]\" "
-"otherwise [code]0[/code] is returned.\n"
-"[codeblock]\n"
-"print(\"0xff\".hex_to_int()) # Print \"255\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Escapes (encodes) a string to URL friendly format. Also referred to as 'URL "
-"encode'.\n"
-"[codeblock]\n"
-"print(\"https://example.org/?escaped=\" + \"Godot Engine:'docs'\"."
-"http_escape())\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Unescapes (decodes) a string in URL encoded format. Also referred to as 'URL "
-"decode'.\n"
-"[codeblock]\n"
-"print(\"https://example.org/?escaped=\" + \"Godot%20Engine%3A%27docs%27\"."
-"http_unescape())\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Converts [code]size[/code] represented as number of bytes to human-readable "
-"format using internationalized set of data size units, namely: B, KiB, MiB, "
-"GiB, TiB, PiB, EiB. Note that the next smallest unit is picked automatically "
-"to hold at most 1024 units.\n"
-"[codeblock]\n"
-"var bytes = 133790307\n"
-"var size = String.humanize_size(bytes)\n"
-"print(size) # prints \"127.5 MiB\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with lines indented with [code]prefix[/code].\n"
-"For example, the string can be indented with two tabs using "
-"[code]\"\\t\\t\"[/code], or four spaces using [code]\"    \"[/code]. The "
-"prefix can be any string so it can also be used to comment out strings with "
-"e.g. [code]\"# \"[/code]. See also [method dedent] to remove indentation.\n"
-"[b]Note:[/b] Empty lines are kept empty."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with the substring [code]what[/code] inserted "
-"at the given position."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"If the string is a path to a file or directory, returns [code]true[/code] if "
-"the path is absolute."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"If the string is a path to a file or directory, returns [code]true[/code] if "
-"the path is relative."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string is a subsequence of the given "
-"string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string is a subsequence of the given "
-"string, without considering case."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string is free from characters that aren't "
-"allowed in file names, those being:\n"
-"[code]: / \\ ? * \" | % < >[/code]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string contains a valid float. This is "
-"inclusive of integers, and also supports exponents:\n"
-"[codeblock]\n"
-"print(\"1.7\".is_valid_float()) # Prints \"True\"\n"
-"print(\"24\".is_valid_float()) # Prints \"True\"\n"
-"print(\"7e3\".is_valid_float()) # Prints \"True\"\n"
-"print(\"Hello\".is_valid_float()) # Prints \"False\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string contains a valid hexadecimal "
-"number. If [code]with_prefix[/code] is [code]true[/code], then a validity of "
-"the hexadecimal number is determined by [code]0x[/code] prefix, for "
-"instance: [code]0xDEADC0DE[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string contains a valid color in "
-"hexadecimal HTML notation. Other HTML notations such as named colors or "
-"[code]hsl()[/code] colors aren't considered valid by this method and will "
-"return [code]false[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string is a valid identifier. A valid "
-"identifier may contain only letters, digits and underscores ([code]_[/code]) "
-"and the first character may not be a digit.\n"
-"[codeblock]\n"
-"print(\"good_ident_1\".is_valid_identifier()) # Prints \"True\"\n"
-"print(\"1st_bad_ident\".is_valid_identifier()) # Prints \"False\"\n"
-"print(\"bad_ident_#2\".is_valid_identifier()) # Prints \"False\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string contains a valid integer.\n"
-"[codeblock]\n"
-"print(\"7\".is_valid_integer()) # Prints \"True\"\n"
-"print(\"14.6\".is_valid_integer()) # Prints \"False\"\n"
-"print(\"L\".is_valid_integer()) # Prints \"False\"\n"
-"print(\"+3\".is_valid_integer()) # Prints \"True\"\n"
-"print(\"-12\".is_valid_integer()) # Prints \"True\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns [code]true[/code] if this string contains only a well-formatted IPv4 "
-"or IPv6 address. This method considers [url=https://en.wikipedia.org/wiki/"
-"Reserved_IP_addresses]reserved IP addresses[/url] such as [code]0.0.0.0[/"
-"code] as valid."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Return a [String] which is the concatenation of the [code]parts[/code]. The "
-"separator between elements is the string providing this method.\n"
-"Example:\n"
-"[codeblock]\n"
-"print(\", \".join([\"One\", \"Two\", \"Three\", \"Four\"]))\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with special characters escaped using the JSON "
-"standard."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns a number of characters from the left of the string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the string's amount of characters."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with characters removed from the left. The "
-"[code]chars[/code] argument is a string specifying the set of characters to "
-"be removed.\n"
-"[b]Note:[/b] The [code]chars[/code] is not a prefix. See [method "
-"trim_prefix] method that will remove a single prefix string rather than a "
-"set of characters."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Does a simple case-sensitive expression match, where [code]\"*\"[/code] "
-"matches zero or more arbitrary characters and [code]\"?\"[/code] matches any "
-"single character except a period ([code]\".\"[/code]). An empty string or "
-"empty expression always evaluates to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Does a simple case-insensitive expression match, where [code]\"*\"[/code] "
-"matches zero or more arbitrary characters and [code]\"?\"[/code] matches any "
-"single character except a period ([code]\".\"[/code]). An empty string or "
-"empty expression always evaluates to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the MD5 hash of the string as an array of bytes."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the MD5 hash of the string as a string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Performs a case-insensitive [i]natural order[/i] comparison to another "
-"string. Returns [code]-1[/code] if less than, [code]1[/code] if greater "
-"than, or [code]0[/code] if equal. \"less than\" or \"greater than\" are "
-"determined by the [url=https://en.wikipedia.org/wiki/"
-"List_of_Unicode_characters]Unicode code points[/url] of each string, which "
-"roughly matches the alphabetical order. Internally, lowercase characters "
-"will be converted to uppercase during the comparison.\n"
-"When used for sorting, natural order comparison will order suites of numbers "
-"as expected by most people. If you sort the numbers from 1 to 10 using "
-"natural order, you will get [code][1, 2, 3, ...][/code] instead of [code][1, "
-"10, 2, 3, ...][/code].\n"
-"[b]Behavior with different string lengths:[/b] Returns [code]1[/code] if the "
-"\"base\" string is longer than the [code]to[/code] string or [code]-1[/code] "
-"if the \"base\" string is shorter than the [code]to[/code] string. Keep in "
-"mind this length is determined by the number of Unicode codepoints, [i]not[/"
-"i] the actual visible characters.\n"
-"[b]Behavior with empty strings:[/b] Returns [code]-1[/code] if the \"base\" "
-"string is empty, [code]1[/code] if the [code]to[/code] string is empty or "
-"[code]0[/code] if both strings are empty.\n"
-"To get a boolean result from a string comparison, use the [code]==[/code] "
-"operator instead. See also [method nocasecmp_to] and [method casecmp_to]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Performs a case-insensitive comparison to another string. Returns [code]-1[/"
-"code] if less than, [code]1[/code] if greater than, or [code]0[/code] if "
-"equal. \"less than\" or \"greater than\" are determined by the [url=https://"
-"en.wikipedia.org/wiki/List_of_Unicode_characters]Unicode code points[/url] "
-"of each string, which roughly matches the alphabetical order. Internally, "
-"lowercase characters will be converted to uppercase during the comparison.\n"
-"[b]Behavior with different string lengths:[/b] Returns [code]1[/code] if the "
-"\"base\" string is longer than the [code]to[/code] string or [code]-1[/code] "
-"if the \"base\" string is shorter than the [code]to[/code] string. Keep in "
-"mind this length is determined by the number of Unicode codepoints, [i]not[/"
-"i] the actual visible characters.\n"
-"[b]Behavior with empty strings:[/b] Returns [code]-1[/code] if the \"base\" "
-"string is empty, [code]1[/code] if the [code]to[/code] string is empty or "
-"[code]0[/code] if both strings are empty.\n"
-"To get a boolean result from a string comparison, use the [code]==[/code] "
-"operator instead. See also [method casecmp_to]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the character code at position [code]at[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Formats a number to have an exact number of [code]digits[/code] after the "
-"decimal point."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Formats a number to have an exact number of [code]digits[/code] before the "
-"decimal point."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Decode a percent-encoded string. See [method percent_encode]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Percent-encodes a string. Encodes parameters in a URL when sending a HTTP "
-"GET request (and bodies of form-urlencoded POST requests)."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"If the string is a path, this concatenates [code]file[/code] at the end of "
-"the string as a subpath. E.g. [code]\"this/is\".plus_file(\"path\") == "
-"\"this/is/path\"[/code]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns original string repeated a number of times. The number of "
-"repetitions is given by the argument."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Replaces occurrences of a case-sensitive substring with the given one inside "
-"the string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Replaces occurrences of a case-insensitive substring with the given one "
-"inside the string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Performs a case-sensitive search for a substring, but starts from the end of "
-"the string instead of the beginning."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Performs a case-insensitive search for a substring, but starts from the end "
-"of the string instead of the beginning."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the right side of the string from a given position."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Splits the string by a [code]delimiter[/code] string and returns an array of "
-"the substrings, starting from right.\n"
-"The splits in the returned array are sorted in the same order as the "
-"original string, from left to right.\n"
-"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
-"delimiters in the string, it will add an empty string to the array of "
-"substrings at this position.\n"
-"If [code]maxsplit[/code] is specified, it defines the number of splits to do "
-"from the right up to [code]maxsplit[/code]. The default value of 0 means "
-"that all items are split, thus giving the same result as [method split].\n"
-"Example:\n"
-"[codeblock]\n"
-"var some_string = \"One,Two,Three,Four\"\n"
-"var some_array = some_string.rsplit(\",\", true, 1)\n"
-"print(some_array.size()) # Prints 2\n"
-"print(some_array[0]) # Prints \"One,Two,Three\"\n"
-"print(some_array[1]) # Prints \"Four\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with characters removed from the right. The "
-"[code]chars[/code] argument is a string specifying the set of characters to "
-"be removed.\n"
-"[b]Note:[/b] The [code]chars[/code] is not a suffix. See [method "
-"trim_suffix] method that will remove a single suffix string rather than a "
-"set of characters."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the SHA-1 hash of the string as an array of bytes."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the SHA-1 hash of the string as a string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the SHA-256 hash of the string as an array of bytes."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the SHA-256 hash of the string as a string."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns the similarity index ([url=https://en.wikipedia.org/wiki/"
-"S%C3%B8rensen%E2%80%93Dice_coefficient]Sorensen-Dice coefficient[/url]) of "
-"this string compared to another. A result of 1.0 means totally similar, "
-"while 0.0 means totally dissimilar.\n"
-"[codeblock]\n"
-"print(\"ABC123\".similarity(\"ABC123\")) # Prints \"1\"\n"
-"print(\"ABC123\".similarity(\"XYZ456\")) # Prints \"0\"\n"
-"print(\"ABC123\".similarity(\"123ABC\")) # Prints \"0.8\"\n"
-"print(\"ABC123\".similarity(\"abc123\")) # Prints \"0.4\"\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns a simplified canonical path."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Splits the string by a [code]delimiter[/code] string and returns an array of "
-"the substrings. The [code]delimiter[/code] can be of any length.\n"
-"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
-"delimiters in the string, it will add an empty string to the array of "
-"substrings at this position.\n"
-"If [code]maxsplit[/code] is specified, it defines the number of splits to do "
-"from the left up to [code]maxsplit[/code]. The default value of [code]0[/"
-"code] means that all items are split.\n"
-"If you need only one element from the array at a specific index, [method "
-"get_slice] is a more performant option.\n"
-"Example:\n"
-"[codeblock]\n"
-"var some_string = \"One,Two,Three,Four\"\n"
-"var some_array = some_string.split(\",\", true, 1)\n"
-"print(some_array.size()) # Prints 2\n"
-"print(some_array[0]) # Prints \"One\"\n"
-"print(some_array[1]) # Prints \"Two,Three,Four\"\n"
-"[/codeblock]\n"
-"If you need to split strings with more complex rules, use the [RegEx] class "
-"instead."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Splits the string in floats by using a delimiter string and returns an array "
-"of the substrings.\n"
-"For example, [code]\"1,2.5,3\"[/code] will return [code][1,2.5,3][/code] if "
-"split by [code]\",\"[/code].\n"
-"If [code]allow_empty[/code] is [code]true[/code], and there are two adjacent "
-"delimiters in the string, it will add an empty string to the array of "
-"substrings at this position."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string stripped of any non-printable character "
-"(including tabulations, spaces and line breaks) at the beginning and the "
-"end. The optional arguments are used to toggle stripping on the left and "
-"right edges respectively."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string stripped of any escape character. These include "
-"all non-printable control characters of the first page of the ASCII table (< "
-"32), such as tabulation ([code]\\t[/code] in C) and newline ([code]\\n[/"
-"code] and [code]\\r[/code]) characters, but not spaces."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns part of the string from the position [code]from[/code] with length "
-"[code]len[/code]. Argument [code]len[/code] is optional and using [code]-1[/"
-"code] will return remaining characters from given position."
-msgstr ""
-"Gibt einen Teil der Zeichenkette ab der Position [code]from[/code] mit der "
-"Länge [code]len[/code] zurück. Das Argument [code]len[/code] ist optional. "
-"Mit [code]-1[/code] werden die restlichen Zeichen ab der angegebenen "
-"Position zurückgegeben."
-
-#: doc/classes/String.xml
-msgid ""
-"Converts the String (which is a character array) to [PoolByteArray] (which "
-"is an array of bytes). The conversion is faster compared to [method "
-"to_utf8], as this method assumes that all the characters in the String are "
-"ASCII characters."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Converts a string containing a decimal number into a [code]float[/code]. The "
-"method will stop on the first non-number character except the first [code].[/"
-"code] (decimal point), and [code]e[/code] which is used for exponential.\n"
-"[codeblock]\n"
-"print(\"12.3\".to_float()) # 12.3\n"
-"print(\"1.2.3\".to_float()) # 1.2\n"
-"print(\"12ab3\".to_float()) # 12\n"
-"print(\"1e3\".to_float()) # 1000\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Converts a string containing an integer number into an [code]int[/code]. The "
-"method will remove any non-number character and stop if it encounters a "
-"[code].[/code].\n"
-"[codeblock]\n"
-"print(\"123\".to_int()) # 123\n"
-"print(\"a1b2c3\".to_int()) # 123\n"
-"print(\"1.2.3\".to_int()) # 1\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the string converted to lowercase."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid "Returns the string converted to uppercase."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Converts the String (which is an array of characters) to [PoolByteArray] "
-"(which is an array of bytes). The conversion is a bit slower than [method "
-"to_ascii], but supports all UTF-8 characters. Therefore, you should prefer "
-"this function over [method to_ascii]."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Converts the String (which is an array of characters) to [PoolByteArray] "
-"(which is an array of bytes)."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Removes a given string from the start if it starts with it or leaves the "
-"string unchanged."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Removes a given string from the end if it ends with it or leaves the string "
-"unchanged."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Removes any characters from the string that are prohibited in [Node] names "
-"([code].[/code] [code]:[/code] [code]@[/code] [code]/[/code] [code]\"[/"
-"code])."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with special characters escaped using the XML "
-"standard."
-msgstr ""
-
-#: doc/classes/String.xml
-msgid ""
-"Returns a copy of the string with escaped characters replaced by their "
-"meanings according to the XML standard."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid "Base class for drawing stylized boxes for the UI."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"StyleBox is [Resource] that provides an abstract base class for drawing "
-"stylized boxes for the UI. StyleBoxes are used for drawing the styles of "
-"buttons, line edit backgrounds, tree backgrounds, etc. and also for testing "
-"a transparency mask for pointer signals. If mask test fails on a StyleBox "
-"assigned as mask to a control, clicks and motion signals will go through it "
-"to the one below.\n"
-"[b]Note:[/b] For children of [Control] that have [i]Theme Properties[/i], "
-"the [code]focus[/code] [StyleBox] is displayed over the [code]normal[/code], "
-"[code]hover[/code] or [code]pressed[/code] [StyleBox]. This makes the "
-"[code]focus[/code] [StyleBox] more reusable across different nodes."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"Draws this stylebox using a canvas item identified by the given [RID].\n"
-"The [RID] value can either be the result of [method CanvasItem."
-"get_canvas_item] called on an existing [CanvasItem]-derived node, or "
-"directly from creating a canvas item in the [VisualServer] with [method "
-"VisualServer.canvas_item_create]."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid "Returns the size of this [StyleBox] without the margins."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"Returns the [CanvasItem] that handles its [constant CanvasItem."
-"NOTIFICATION_DRAW] or [method CanvasItem._draw] callback at this moment."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid "Returns the default value of the specified [enum Margin]."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"Returns the content margin offset for the specified [enum Margin].\n"
-"Positive values reduce size inwards, unlike [Control]'s margin values."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid "Returns the minimum size that this stylebox can be shrunk to."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"Returns the \"offset\" of a stylebox. This helper function returns a value "
-"equivalent to [code]Vector2(style.get_margin(MARGIN_LEFT), style."
-"get_margin(MARGIN_TOP))[/code]."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"Sets the default value of the specified [enum Margin] to given [code]offset[/"
-"code] in pixels."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid "Test a position in a rectangle, return whether it passes the mask test."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"The bottom margin for the contents of this style box. Increasing this value "
-"reduces the space available to the contents from the bottom.\n"
-"If this value is negative, it is ignored and a child-specific margin is used "
-"instead. For example for [StyleBoxFlat] the border thickness (if any) is "
-"used instead.\n"
-"It is up to the code using this style box to decide what these contents are: "
-"for example, a [Button] respects this content margin for the textual "
-"contents of the button.\n"
-"[method get_margin] should be used to fetch this value as consumer instead "
-"of reading these properties directly. This is because it correctly respects "
-"negative values and the fallback mentioned above."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"The left margin for the contents of this style box.Increasing this value "
-"reduces the space available to the contents from the left.\n"
-"Refer to [member content_margin_bottom] for extra considerations."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"The right margin for the contents of this style box. Increasing this value "
-"reduces the space available to the contents from the right.\n"
-"Refer to [member content_margin_bottom] for extra considerations."
-msgstr ""
-
-#: doc/classes/StyleBox.xml
-msgid ""
-"The top margin for the contents of this style box. Increasing this value "
-"reduces the space available to the contents from the top.\n"
-"Refer to [member content_margin_bottom] for extra considerations."
-msgstr ""
-
-#: doc/classes/StyleBoxEmpty.xml
-msgid "Empty stylebox (does not display anything)."
-msgstr ""
-
-#: doc/classes/StyleBoxEmpty.xml
-msgid "Empty stylebox (really does not display anything)."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Customizable [StyleBox] with a given set of parameters (no texture required)."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"This [StyleBox] can be used to achieve all kinds of looks without the need "
-"of a texture. The following properties are customizable:\n"
-"- Color\n"
-"- Border width (individual width for each border)\n"
-"- Rounded corners (individual radius for each corner)\n"
-"- Shadow (with blur and offset)\n"
-"Setting corner radius to high values is allowed. As soon as corners overlap, "
-"the stylebox will switch to a relative system. Example:\n"
-"[codeblock]\n"
-"height = 30\n"
-"corner_radius_top_left = 50\n"
-"corner_radius_bottom_left = 100\n"
-"[/codeblock]\n"
-"The relative system now would take the 1:2 ratio of the two left corners to "
-"calculate the actual corner width. Both corners added will [b]never[/b] be "
-"more than the height. Result:\n"
-"[codeblock]\n"
-"corner_radius_top_left: 10\n"
-"corner_radius_bottom_left: 20\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Returns the given [code]margin[/code]'s border width. See [enum Margin] for "
-"possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Returns the smallest border width out of all four borders."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Returns the given [code]corner[/code]'s radius. See [enum Corner] for "
-"possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml doc/classes/StyleBoxTexture.xml
-msgid ""
-"Returns the size of the given [code]margin[/code]'s expand margin. See [enum "
-"Margin] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Sets the border width to [code]width[/code] pixels for the given "
-"[code]margin[/code]. See [enum Margin] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Sets the border width to [code]width[/code] pixels for all margins."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Sets the corner radius to [code]radius[/code] pixels for the given "
-"[code]corner[/code]. See [enum Corner] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Sets the corner radius to [code]radius[/code] pixels for all corners."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Sets the corner radius for each corner to [code]radius_top_left[/code], "
-"[code]radius_top_right[/code], [code]radius_bottom_right[/code], and "
-"[code]radius_bottom_left[/code] pixels."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml doc/classes/StyleBoxTexture.xml
-msgid ""
-"Sets the expand margin to [code]size[/code] pixels for the given "
-"[code]margin[/code]. See [enum Margin] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml doc/classes/StyleBoxTexture.xml
-msgid "Sets the expand margin to [code]size[/code] pixels for all margins."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml doc/classes/StyleBoxTexture.xml
-msgid ""
-"Sets the expand margin for each margin to [code]size_left[/code], "
-"[code]size_top[/code], [code]size_right[/code], and [code]size_bottom[/code] "
-"pixels."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Antialiasing draws a small ring around the edges, which fades to "
-"transparency. As a result, edges look much smoother. This is only noticeable "
-"when using rounded corners or [member skew].\n"
-"[b]Note:[/b] When using beveled corners with 45-degree angles ([member "
-"corner_detail] = 1), it is recommended to set [member anti_aliasing] to "
-"[code]false[/code] to ensure crisp visuals and avoid possible visual "
-"glitches."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"This changes the size of the faded ring. Higher values can be used to "
-"achieve a \"blurry\" effect."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "The background color of the stylebox."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "If [code]true[/code], the border will fade into the background color."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Sets the color of the border."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Border width for the bottom border."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Border width for the left border."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Border width for the right border."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Border width for the top border."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"This sets the number of vertices used for each corner. Higher values result "
-"in rounder corners but take more processing power to compute. When choosing "
-"a value, you should take the corner radius ([method set_corner_radius_all]) "
-"into account.\n"
-"For corner radii less than 10, [code]4[/code] or [code]5[/code] should be "
-"enough. For corner radii less than 30, values between [code]8[/code] and "
-"[code]12[/code] should be enough.\n"
-"A corner detail of [code]1[/code] will result in chamfered corners instead "
-"of rounded corners, which is useful for some artistic effects."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"The bottom-left corner's radius. If [code]0[/code], the corner is not "
-"rounded."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"The bottom-right corner's radius. If [code]0[/code], the corner is not "
-"rounded."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"The top-left corner's radius. If [code]0[/code], the corner is not rounded."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"The top-right corner's radius. If [code]0[/code], the corner is not rounded."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "Toggles drawing of the inner part of the stylebox."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Expands the stylebox outside of the control rect on the bottom edge. Useful "
-"in combination with [member border_width_bottom] to draw a border outside "
-"the control rect.\n"
-"[b]Note:[/b] Unlike [member StyleBox.content_margin_bottom], [member "
-"expand_margin_bottom] does [i]not[/i] affect the size of the clickable area "
-"for [Control]s. This can negatively impact usability if used wrong, as the "
-"user may try to click an area of the StyleBox that cannot actually receive "
-"clicks."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Expands the stylebox outside of the control rect on the left edge. Useful in "
-"combination with [member border_width_left] to draw a border outside the "
-"control rect.\n"
-"[b]Note:[/b] Unlike [member StyleBox.content_margin_left], [member "
-"expand_margin_left] does [i]not[/i] affect the size of the clickable area "
-"for [Control]s. This can negatively impact usability if used wrong, as the "
-"user may try to click an area of the StyleBox that cannot actually receive "
-"clicks."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Expands the stylebox outside of the control rect on the right edge. Useful "
-"in combination with [member border_width_right] to draw a border outside the "
-"control rect.\n"
-"[b]Note:[/b] Unlike [member StyleBox.content_margin_right], [member "
-"expand_margin_right] does [i]not[/i] affect the size of the clickable area "
-"for [Control]s. This can negatively impact usability if used wrong, as the "
-"user may try to click an area of the StyleBox that cannot actually receive "
-"clicks."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"Expands the stylebox outside of the control rect on the top edge. Useful in "
-"combination with [member border_width_top] to draw a border outside the "
-"control rect.\n"
-"[b]Note:[/b] Unlike [member StyleBox.content_margin_top], [member "
-"expand_margin_top] does [i]not[/i] affect the size of the clickable area for "
-"[Control]s. This can negatively impact usability if used wrong, as the user "
-"may try to click an area of the StyleBox that cannot actually receive clicks."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"The color of the shadow. This has no effect if [member shadow_size] is lower "
-"than 1."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"The shadow offset in pixels. Adjusts the position of the shadow relatively "
-"to the stylebox."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid "The shadow size in pixels."
-msgstr ""
-
-#: doc/classes/StyleBoxFlat.xml
-msgid ""
-"If set to a non-zero value on either axis, [member skew] distorts the "
-"StyleBox horizontally and/or vertically. This can be used for \"futuristic\"-"
-"style UIs. Positive values skew the StyleBox towards the right (X axis) and "
-"upwards (Y axis), while negative values skew the StyleBox towards the left "
-"(X axis) and downwards (Y axis).\n"
-"[b]Note:[/b] To ensure text does not touch the StyleBox's edges, consider "
-"increasing the [StyleBox]'s content margin (see [member StyleBox."
-"content_margin_bottom]). It is preferable to increase the content margin "
-"instead of the expand margin (see [member expand_margin_bottom]), as "
-"increasing the expand margin does not increase the size of the clickable "
-"area for [Control]s."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid "[StyleBox] that displays a single line."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid ""
-"[StyleBox] that displays a single line of a given color and thickness. It "
-"can be used to draw things like separators."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid "The line's color."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid ""
-"The number of pixels the line will extend before the [StyleBoxLine]'s "
-"bounds. If set to a negative value, the line will begin inside the "
-"[StyleBoxLine]'s bounds."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid ""
-"The number of pixels the line will extend past the [StyleBoxLine]'s bounds. "
-"If set to a negative value, the line will end inside the [StyleBoxLine]'s "
-"bounds."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid "The line's thickness in pixels."
-msgstr ""
-
-#: doc/classes/StyleBoxLine.xml
-msgid ""
-"If [code]true[/code], the line will be vertical. If [code]false[/code], the "
-"line will be horizontal."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid "Texture-based nine-patch [StyleBox]."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Texture-based nine-patch [StyleBox], in a way similar to [NinePatchRect]. "
-"This stylebox performs a 3×3 scaling of a texture, where only the center "
-"cell is fully stretched. This makes it possible to design bordered styles "
-"regardless of the stylebox's size."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Returns the size of the given [code]margin[/code]. See [enum Margin] for "
-"possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Sets the margin to [code]size[/code] pixels for the given [code]margin[/"
-"code]. See [enum Margin] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Controls how the stylebox's texture will be stretched or tiled horizontally. "
-"See [enum AxisStretchMode] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Controls how the stylebox's texture will be stretched or tiled vertically. "
-"See [enum AxisStretchMode] for possible values."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"If [code]true[/code], the nine-patch texture's center tile will be drawn."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Expands the bottom margin of this style box when drawing, causing it to be "
-"drawn larger than requested."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Expands the left margin of this style box when drawing, causing it to be "
-"drawn larger than requested."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Expands the right margin of this style box when drawing, causing it to be "
-"drawn larger than requested."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Expands the top margin of this style box when drawing, causing it to be "
-"drawn larger than requested."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Increases the bottom margin of the 3×3 texture box.\n"
-"A higher value means more of the source texture is considered to be part of "
-"the bottom border of the 3×3 box.\n"
-"This is also the value used as fallback for [member StyleBox."
-"content_margin_bottom] if it is negative."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Increases the left margin of the 3×3 texture box.\n"
-"A higher value means more of the source texture is considered to be part of "
-"the left border of the 3×3 box.\n"
-"This is also the value used as fallback for [member StyleBox."
-"content_margin_left] if it is negative."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Increases the right margin of the 3×3 texture box.\n"
-"A higher value means more of the source texture is considered to be part of "
-"the right border of the 3×3 box.\n"
-"This is also the value used as fallback for [member StyleBox."
-"content_margin_right] if it is negative."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Increases the top margin of the 3×3 texture box.\n"
-"A higher value means more of the source texture is considered to be part of "
-"the top border of the 3×3 box.\n"
-"This is also the value used as fallback for [member StyleBox."
-"content_margin_top] if it is negative."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid "Modulates the color of the texture when this style box is drawn."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"The normal map to use when drawing this style box.\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y-, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Species a sub-region of the texture to use.\n"
-"This is equivalent to first wrapping the texture in an [AtlasTexture] with "
-"the same region."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid "The texture to use when drawing this style box."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid "Emitted when the stylebox's texture is changed."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Stretch the stylebox's texture. This results in visible distortion unless "
-"the texture size matches the stylebox's size perfectly."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Repeats the stylebox's texture to match the stylebox's size according to the "
-"nine-patch system."
-msgstr ""
-
-#: doc/classes/StyleBoxTexture.xml
-msgid ""
-"Repeats the stylebox's texture to match the stylebox's size according to the "
-"nine-patch system. Unlike [constant AXIS_STRETCH_MODE_TILE], the texture may "
-"be slightly stretched to make the nine-patch texture tile seamlessly."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid "Helper tool to create geometry."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"The [SurfaceTool] is used to construct a [Mesh] by specifying vertex "
-"attributes individually. It can be used to construct a [Mesh] from a script. "
-"All properties except indices need to be added before calling [method "
-"add_vertex]. For example, to add vertex colors and UVs:\n"
-"[codeblock]\n"
-"var st = SurfaceTool.new()\n"
-"st.begin(Mesh.PRIMITIVE_TRIANGLES)\n"
-"st.add_color(Color(1, 0, 0))\n"
-"st.add_uv(Vector2(0, 0))\n"
-"st.add_vertex(Vector3(0, 0, 0))\n"
-"[/codeblock]\n"
-"The above [SurfaceTool] now contains one vertex of a triangle which has a UV "
-"coordinate and a specified [Color]. If another vertex were added without "
-"calling [method add_uv] or [method add_color], then the last values would be "
-"used.\n"
-"Vertex attributes must be passed [b]before[/b] calling [method add_vertex]. "
-"Failure to do so will result in an error when committing the vertex "
-"information to a mesh.\n"
-"Additionally, the attributes used before the first vertex is added determine "
-"the format of the mesh. For example, if you only add UVs to the first "
-"vertex, you cannot add color to any of the subsequent vertices.\n"
-"See also [ArrayMesh], [ImmediateGeometry] and [MeshDataTool] for procedural "
-"geometry generation.\n"
-"[b]Note:[/b] Godot uses clockwise [url=https://learnopengl.com/Advanced-"
-"OpenGL/Face-culling]winding order[/url] for front faces of triangle "
-"primitive modes."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies an array of bones to use for the [i]next[/i] vertex. [code]bones[/"
-"code] must contain 4 integers."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies a [Color] to use for the [i]next[/i] vertex. If every vertex needs "
-"to have this information set and you fail to submit it for the first vertex, "
-"this information may not be used at all.\n"
-"[b]Note:[/b] The material must have [member SpatialMaterial."
-"vertex_color_use_as_albedo] enabled for the vertex color to be visible."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Adds an index to index array if you are using indexed vertices. Does not "
-"need to be called before adding vertices."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies a normal to use for the [i]next[/i] vertex. If every vertex needs "
-"to have this information set and you fail to submit it for the first vertex, "
-"this information may not be used at all."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies whether the current vertex (if using only vertex arrays) or "
-"current index (if also using index arrays) should use smooth normals for "
-"normal calculation."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies a tangent to use for the [i]next[/i] vertex. If every vertex needs "
-"to have this information set and you fail to submit it for the first vertex, "
-"this information may not be used at all."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Inserts a triangle fan made of array data into [Mesh] being constructed.\n"
-"Requires the primitive type be set to [constant Mesh.PRIMITIVE_TRIANGLES]."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies a set of UV coordinates to use for the [i]next[/i] vertex. If "
-"every vertex needs to have this information set and you fail to submit it "
-"for the first vertex, this information may not be used at all."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies an optional second set of UV coordinates to use for the [i]next[/"
-"i] vertex. If every vertex needs to have this information set and you fail "
-"to submit it for the first vertex, this information may not be used at all."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies the position of current vertex. Should be called after specifying "
-"other vertex properties (e.g. Color, UV)."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Specifies weight values to use for the [i]next[/i] vertex. [code]weights[/"
-"code] must contain 4 values. If every vertex needs to have this information "
-"set and you fail to submit it for the first vertex, this information may not "
-"be used at all."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Append vertices from a given [Mesh] surface onto the current vertex array "
-"with specified [Transform].\n"
-"[b]Note:[/b] Using [method append_from] on a [Thread] is much slower as the "
-"GPU must communicate data back to the CPU, while also causing the main "
-"thread to stall (as OpenGL is not thread-safe). Consider requesting a copy "
-"of the mesh, converting it to an [ArrayMesh] and adding vertices manually "
-"instead."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Called before adding any vertices. Takes the primitive type as an argument "
-"(e.g. [constant Mesh.PRIMITIVE_TRIANGLES])."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid "Clear all information passed into the surface tool so far."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Returns a constructed [ArrayMesh] from current information passed in. If an "
-"existing [ArrayMesh] is passed in as an argument, will add an extra surface "
-"to the existing [ArrayMesh].\n"
-"Default flag is [constant Mesh.ARRAY_COMPRESS_DEFAULT] if compression is "
-"enabled. If compression is disabled the default flag is [constant Mesh."
-"ARRAY_FLAG_USE_OCTAHEDRAL_COMPRESSION]. See [code]ARRAY_COMPRESS_*[/code] "
-"constants in [enum Mesh.ArrayFormat] for other flags."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Commits the data to the same format used by [method ArrayMesh."
-"add_surface_from_arrays]. This way you can further process the mesh data "
-"using the [ArrayMesh] API."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid "Creates a vertex array from an existing [Mesh]."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Creates a vertex array from the specified blend shape of an existing [Mesh]. "
-"This can be used to extract a specific pose from a blend shape."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid "Removes the index array by expanding the vertex array."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Generates normals from vertices so you do not have to do it manually. If "
-"[code]flip[/code] is [code]true[/code], the resulting normals will be "
-"inverted. [method generate_normals] should be called [i]after[/i] generating "
-"geometry and [i]before[/i] committing the mesh using [method commit] or "
-"[method commit_to_arrays]. For correct display of normal-mapped surfaces, "
-"you will also have to generate tangents using [method generate_tangents].\n"
-"[b]Note:[/b] [method generate_normals] only works if the primitive type to "
-"be set to [constant Mesh.PRIMITIVE_TRIANGLES]."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Generates a tangent vector for each vertex. Requires that each vertex have "
-"UVs and normals set already (see [method generate_normals])."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid ""
-"Shrinks the vertex array by creating an index array. This can improve "
-"performance by avoiding vertex reuse."
-msgstr ""
-
-#: doc/classes/SurfaceTool.xml
-msgid "Sets [Material] to be used by the [Mesh] you are constructing."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "Tabbed container."
-msgstr "Tabulierter Container."
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Arranges [Control] children into a tabbed view, creating a tab for each one. "
-"The active tab's corresponding [Control] has its [code]visible[/code] "
-"property set to [code]true[/code], and all other children's to [code]false[/"
-"code].\n"
-"Ignores non-[Control] children.\n"
-"[b]Note:[/b] The drawing of the clickable tabs themselves is handled by this "
-"node. Adding [Tabs] as children is not needed."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "Returns the child [Control] node located at the active tab index."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Returns the [Popup] node instance if one has been set already with [method "
-"set_popup].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Returns the previously active tab index."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "Returns the [Control] node from the tab at index [code]tab_idx[/code]."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Returns the number of tabs."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid ""
-"Returns [code]true[/code] if the tab at index [code]tab_idx[/code] is "
-"disabled."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the tab at index [code]tab_idx[/code] is hidden."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur bei Index [code]idx[/code] "
-"aktiviert ist."
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-#, fuzzy
-msgid ""
-"Returns the [Texture] for the tab at index [code]tab_idx[/code] or "
-"[code]null[/code] if the tab has no [Texture]."
-msgstr ""
-"Liefert die [Animation] mit dem Schlüssel [code]name[/code] oder [code]null[/"
-"code], wenn nicht gefunden."
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Returns the index of the tab at local coordinates [code]point[/code]. "
-"Returns [code]-1[/code] if the point is outside the control boundaries or if "
-"there's no tab at the queried position."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Returns the title of the tab at index [code]tab_idx[/code]. Tab titles "
-"default to the name of the indexed child node, but this can be overridden "
-"with [method set_tab_title]."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "Returns the [TabContainer] rearrange group id."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"If set on a [Popup] node instance, a popup menu icon appears in the top-"
-"right corner of the [TabContainer]. Clicking it will expand the [Popup] node."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-#, fuzzy
-msgid ""
-"If [code]disabled[/code] is [code]true[/code], disables the tab at index "
-"[code]tab_idx[/code], making it non-interactable."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur bei Index [code]idx[/code] "
-"aktiviert ist."
-
-#: doc/classes/TabContainer.xml
-#, fuzzy
-msgid ""
-"If [code]hidden[/code] is [code]true[/code], hides the tab at index "
-"[code]tab_idx[/code], making it disappear from the tab area."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die Spur bei Index [code]idx[/code] "
-"aktiviert ist."
-
-#: doc/classes/TabContainer.xml
-msgid "Sets an icon for the tab at index [code]tab_idx[/code]."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Sets a title for the tab at index [code]tab_idx[/code]. Tab titles default "
-"to the name of the indexed child node."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Defines rearrange group id, choose for each [TabContainer] the same value to "
-"enable tab drag between [TabContainer]. Enable drag with [member "
-"drag_to_rearrange_enabled]."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"If [code]true[/code], all tabs are drawn in front of the panel. If "
-"[code]false[/code], inactive tabs are drawn behind the panel."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"The current tab index. When set, this index's [Control] node's "
-"[code]visible[/code] property is set to [code]true[/code] and all others are "
-"set to [code]false[/code]."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "If [code]true[/code], tabs can be rearranged with mouse drag."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"The alignment of all tabs in the tab container. See the [enum TabAlign] "
-"constants for details."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"If [code]true[/code], tabs are visible. If [code]false[/code], tabs' content "
-"and titles are hidden."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"If [code]true[/code], children [Control] nodes that are hidden have their "
-"minimum size take into account in the total, instead of only the currently "
-"visible one."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"Emitted when the [TabContainer]'s [Popup] button is clicked. See [method "
-"set_popup] for details."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Emitted when switching to another tab."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "Emitted when a tab is selected, even if it is the current tab."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Align the tabs to the left."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Align the tabs to the center."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Align the tabs to the right."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Font color of inactive tabs."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Font color of disabled tabs."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "Font color of the currently selected tab."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "Horizontal separation between tabs."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "The space at the left and right edges of the tab bar."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "The font used to draw tab names."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid ""
-"Icon for the left arrow button that appears when there are too many tabs to "
-"fit in the container width. When the button is disabled (i.e. the first tab "
-"is visible), it appears semi-transparent."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid ""
-"Icon for the left arrow button that appears when there are too many tabs to "
-"fit in the container width. Used when the button is being hovered with the "
-"cursor."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid ""
-"Icon for the right arrow button that appears when there are too many tabs to "
-"fit in the container width. When the button is disabled (i.e. the last tab "
-"is visible) it appears semi-transparent."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid ""
-"Icon for the right arrow button that appears when there are too many tabs to "
-"fit in the container width. Used when the button is being hovered with the "
-"cursor."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "The icon for the menu button (see [method set_popup])."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid ""
-"The icon for the menu button (see [method set_popup]) when it's being "
-"hovered with the cursor."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "The style for the background fill."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "The style of inactive tabs."
-msgstr ""
-
-#: doc/classes/TabContainer.xml
-msgid "The style of disabled tabs."
-msgstr ""
-
-#: doc/classes/TabContainer.xml doc/classes/Tabs.xml
-msgid "The style of the currently selected tab."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Tabs control."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"Simple tabs control, similar to [TabContainer] but is only in charge of "
-"drawing tabs, not interacting with children."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Adds a new tab."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Moves the scroll view to make the tab visible."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"Returns [code]true[/code] if the offset buttons (the ones that appear when "
-"there's not enough space for all tabs) are visible."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Returns [code]true[/code] if select with right mouse button is enabled."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-#, fuzzy
-msgid "Returns the button icon from the tab at index [code]tab_idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/Tabs.xml
-msgid "Returns the number of hidden tabs offsetted to the left."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Returns tab [Rect2] with local position and size."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-#, fuzzy
-msgid "Returns the title of the tab at index [code]tab_idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/Tabs.xml
-msgid "Returns the [Tabs]' rearrange group ID."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Moves a tab from [code]from[/code] to [code]to[/code]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Removes the tab at index [code]tab_idx[/code]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"If [code]true[/code], enables selecting a tab with the right mouse button."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-#, fuzzy
-msgid "Sets the button icon from the tab at index [code]tab_idx[/code]."
-msgstr "Liefert die Position des Punktes bei Index [code]Punkt[/code]."
-
-#: doc/classes/Tabs.xml
-msgid "Sets an [code]icon[/code] for the tab at index [code]tab_idx[/code]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Sets a [code]title[/code] for the tab at index [code]tab_idx[/code]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"Defines the rearrange group ID. Choose for each [Tabs] the same value to "
-"dragging tabs between [Tabs]. Enable drag with [member "
-"drag_to_rearrange_enabled]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Select tab at index [code]tab_idx[/code]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"if [code]true[/code], the mouse's scroll wheel can be used to navigate the "
-"scroll view."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "The alignment of all tabs. See [enum TabAlign] for details."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"Sets when the close button will appear on the tabs. See [enum "
-"CloseButtonDisplayPolicy] for details."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid ""
-"Emitted when the active tab is rearranged via mouse drag. See [member "
-"drag_to_rearrange_enabled]."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-#, fuzzy
-msgid ""
-"Emitted when a tab's right button is pressed. See [method "
-"set_tab_button_icon]."
-msgstr ""
-"Wird ausgegeben, wenn eine benutzerdefinierte Taste gedrückt wird. Siehe "
-"[method add_button]."
-
-#: doc/classes/Tabs.xml
-msgid "Emitted when a tab is clicked, even if it is the current tab."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Emitted when a tab is closed."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Emitted when a tab is hovered by the mouse."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Represents the size of the [enum TabAlign] enum."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Never show the close buttons."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Only show the close button on the currently active tab."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Show the close button on all tabs."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Represents the size of the [enum CloseButtonDisplayPolicy] enum."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "The horizontal separation between the tabs."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "The icon for the close button (see [member tab_close_display_policy])."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Background of the close button when it's being hovered with the cursor."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "Background of the close button when it's being pressed."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "The style of an inactive tab."
-msgstr ""
-
-#: doc/classes/Tabs.xml
-msgid "The style of a disabled tab"
-msgstr ""
-
-#: doc/classes/TCP_Server.xml
-msgid "A TCP server."
-msgstr ""
-
-#: doc/classes/TCP_Server.xml
-msgid ""
-"A TCP server. Listens to connections on a port and returns a [StreamPeerTCP] "
-"when it gets an incoming connection."
-msgstr ""
-
-#: doc/classes/TCP_Server.xml
-msgid "Returns [code]true[/code] if a connection is available for taking."
-msgstr ""
-
-#: doc/classes/TCP_Server.xml
-msgid ""
-"Returns [code]true[/code] if the server is currently listening for "
-"connections."
-msgstr ""
-
-#: doc/classes/TCP_Server.xml
-msgid ""
-"Listen on the [code]port[/code] binding to [code]bind_address[/code].\n"
-"If [code]bind_address[/code] is set as [code]\"*\"[/code] (default), the "
-"server will listen on all available addresses (both IPv4 and IPv6).\n"
-"If [code]bind_address[/code] is set as [code]\"0.0.0.0\"[/code] (for IPv4) "
-"or [code]\"::\"[/code] (for IPv6), the server will listen on all available "
-"addresses matching that IP type.\n"
-"If [code]bind_address[/code] is set to any valid address (e.g. "
-"[code]\"192.168.1.101\"[/code], [code]\"::1\"[/code], etc), the server will "
-"only listen on the interface with that addresses (or fail if no interface "
-"with the given address exists)."
-msgstr ""
-
-#: doc/classes/TCP_Server.xml
-msgid "Stops listening."
-msgstr "Zuhören stoppen."
-
-#: doc/classes/TCP_Server.xml
-msgid ""
-"If a connection is available, returns a StreamPeerTCP with the connection."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Multiline text editing control."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"TextEdit is meant for editing large, multiline text. It also has facilities "
-"for editing code, such as syntax highlighting support and multiple levels of "
-"undo/redo.\n"
-"[b]Note:[/b] When holding down [code]Alt[/code], the vertical scroll wheel "
-"will scroll 5 times as fast as it would normally do. This also works in the "
-"Godot script editor."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Adds color region (given the delimiters) and its colors."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Adds a [code]keyword[/code] and its [Color]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Returns if the given line is foldable, that is, it has indented lines right "
-"below it."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Centers the viewport on the line the editing cursor is at. This also resets "
-"the [member scroll_horizontal] value to [code]0[/code]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Clears all custom syntax coloring information previously added with [method "
-"add_color_region] or [method add_keyword_color]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Clears the undo history."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Copy's the current text selection."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the column the editing cursor is at."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the line the editing cursor is at."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Moves the cursor at the specified [code]column[/code] index.\n"
-"If [code]adjust_viewport[/code] is set to [code]true[/code], the viewport "
-"will center at the cursor position after the move occurs."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Moves the cursor at the specified [code]line[/code] index.\n"
-"If [code]adjust_viewport[/code] is set to [code]true[/code], the viewport "
-"will center at the cursor position after the move occurs.\n"
-"If [code]can_be_hidden[/code] is set to [code]true[/code], the specified "
-"[code]line[/code] can be hidden using [method set_line_as_hidden]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Cut's the current selection."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Deselects the current selection."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Folds all lines that are possible to be folded (see [method can_fold])."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Folds the given line, if possible (see [method can_fold])."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns an array containing the line number of each breakpoint."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns the [Color] of the specified [code]keyword[/code]."
-msgstr "Gibt das Unternodemit dem angegebenen [code]Namen[/code] zurück."
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the text of a specific line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Returns the line and column at the given position. In the returned vector, "
-"[code]x[/code] is the column, [code]y[/code] is the line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the amount of total lines in the text."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns the height of a largest line."
-msgstr "Gibt die [Texture2D] des angegebenen Rahmens zurück."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"Returns the width in pixels of the [code]wrap_index[/code] on [code]line[/"
-"code]."
-msgstr ""
-"Benennt eine vorhandene Animation mit der Taste [code]name[/code] in "
-"[code]newname[/code] um."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns the number of times the given line is wrapped."
-msgstr "Gibt die Anzahl der Dreiecke im Überblendungsbereich zurück."
-
-#: doc/classes/TextEdit.xml
-msgid "Returns an array of [String]s representing each wrapped index."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Returns the [PopupMenu] of this [TextEdit]. By default, this menu is "
-"displayed when right-clicking on the [TextEdit].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Returns the local position for the given [code]line[/code] and [code]column[/"
-"code]. If [code]x[/code] or [code]y[/code] of the returned vector equal "
-"[code]-1[/code], the position is outside of the viewable area of the "
-"control.\n"
-"[b]Note:[/b] The Y position corresponds to the bottom side of the line. Use "
-"[method get_rect_at_line_column] to get the top side position."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Returns the local position and size for the grapheme at the given "
-"[code]line[/code] and [code]column[/code]. If [code]x[/code] or [code]y[/"
-"code] position of the returned rect equal [code]-1[/code], the position is "
-"outside of the viewable area of the control.\n"
-"[b]Note:[/b] The Y position of the returned rect corresponds to the top side "
-"of the line, unlike [method get_pos_at_line_column] which returns the bottom "
-"side."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the selection begin line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the text inside the selection."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns the selection end line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns the total width of all gutters and internal padding."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns the total amount of lines that could be drawn."
-msgstr "Gibt die Anzahl der Tasten in einer bestimmten Spur zurück."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns the number of visible lines, including wrapped text."
-msgstr "Gibt die Anzahl der Dreiecke im Überblendungsbereich zurück."
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Returns a [String] text with the word under the caret (text cursor) location."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"Returns whether the specified [code]keyword[/code] has a color set to it or "
-"not."
-msgstr "Gibt das Unternodemit dem angegebenen [code]Namen[/code] zurück."
-
-#: doc/classes/TextEdit.xml doc/classes/UndoRedo.xml
-msgid "Returns [code]true[/code] if a \"redo\" action is available."
-msgstr "Gibt [code]true[/code] zurück, wenn eine \"redo\" Aktion möglich ist."
-
-#: doc/classes/TextEdit.xml doc/classes/UndoRedo.xml
-msgid "Returns [code]true[/code] if an \"undo\" action is available."
-msgstr "Gibt [code]true[/code] zurück, wenn eine \"undo\" Aktion möglich ist."
-
-#: doc/classes/TextEdit.xml
-msgid "Insert the specified text at the cursor position."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns whether the line at the specified index is folded or not."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Returns whether the line at the specified index is hidden or not."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] when the specified [code]line[/code] is bookmarked."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Unternode mit dem angegebenen "
-"[code]name[/code] existiert."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] when the specified [code]line[/code] has a "
-"breakpoint."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Unternode mit dem angegebenen "
-"[code]name[/code] existiert."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] when the specified [code]line[/code] is marked as "
-"safe."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Unternode mit dem angegebenen "
-"[code]name[/code] existiert."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "Returns if the given line is wrapped."
-msgstr "Gibt den Namen des übergebenen AnimationNode zurück."
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid ""
-"Returns whether the mouse is over selection. If [code]edges[/code] is "
-"[code]true[/code], the edges are considered part of the selection."
-msgstr ""
-"Liefert [code]wahr[/code] als Ergebnis wenn [code]a[/code] und [code]b[/"
-"code] ungefähr gleich sind."
-
-#: doc/classes/TextEdit.xml
-msgid "Returns [code]true[/code] if the selection is active."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Triggers a right-click menu action by the specified index. See [enum "
-"MenuItems] for a list of available indexes."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Paste the current selection."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Perform redo operation."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Removes all the breakpoints. This will not fire the [signal "
-"breakpoint_toggled] signal."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Perform a search inside the text. Search flags can be specified in the [enum "
-"SearchFlags] enum.\n"
-"Returns an empty [code]PoolIntArray[/code] if no result was found. "
-"Otherwise, the result line and column can be accessed at indices specified "
-"in the [enum SearchResult] enum, e.g:\n"
-"[codeblock]\n"
-"var result = search(key, flags, line, column)\n"
-"if result.size() > 0:\n"
-"    # Result found.\n"
-"    var res_line = result[TextEdit.SEARCH_RESULT_LINE]\n"
-"    var res_column = result[TextEdit.SEARCH_RESULT_COLUMN]\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Perform selection, from line/column to line/column.\n"
-"If [member selecting_enabled] is [code]false[/code], no selection will occur."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Select all the text.\n"
-"If [member selecting_enabled] is [code]false[/code], no selection will occur."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the text for a specific line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Bookmarks the [code]line[/code] if [code]bookmark[/code] is [code]true[/"
-"code]. Deletes the bookmark if [code]bookmark[/code] is [code]false[/code].\n"
-"Bookmarks are shown in the [member breakpoint_gutter]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Adds or removes the breakpoint in [code]line[/code]. Breakpoints are shown "
-"in the [member breakpoint_gutter]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "If [code]true[/code], hides the line of the specified index."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], marks the [code]line[/code] as safe.\n"
-"This will show the line number with the color provided in the "
-"[code]safe_line_number_color[/code] theme property."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Toggle the folding of the code block at the given line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Perform undo operation."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Unfolds the given line, if folded."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Unhide all lines that were previously set to hidden by [method "
-"set_line_as_hidden]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "If [code]true[/code], the bookmark gutter is visible."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/TextEdit.xml
-msgid "If [code]true[/code], the breakpoint gutter is visible."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], the caret displays as a rectangle.\n"
-"If [code]false[/code], the caret displays as a bar."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], a right-click moves the cursor at the mouse position "
-"before displaying the context menu.\n"
-"If [code]false[/code], the context menu disregards mouse location."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "If [code]true[/code], a right-click displays the context menu."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-#, fuzzy
-msgid "If [code]true[/code], allow drag and drop of selected text."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], the \"space\" character will have a visible "
-"representation."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], the \"tab\" character will have a visible "
-"representation."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], the fold gutter is visible. This enables folding "
-"groups of indented lines."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], all lines that have been set to hidden by [method "
-"set_line_as_hidden], will not be visible."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], all occurrences of the selected text will be "
-"highlighted."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "If [code]true[/code], the line containing the cursor is highlighted."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], a minimap is shown, providing an outline of your "
-"source code."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "The width, in pixels, of the minimap."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], custom [code]font_color_selected[/code] will be used "
-"for selected text."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], read-only mode is enabled. Existing text cannot be "
-"modified and new text cannot be added."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If there is a horizontal scrollbar, this determines the current horizontal "
-"scroll value in pixels."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If there is a vertical scrollbar, this determines the current vertical "
-"scroll value in line numbers, starting at 0 for the top line."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], text can be selected.\n"
-"If [code]false[/code], text can not be selected by the user or by the "
-"[method select] or [method select_all] methods."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], shortcut keys for context menu items are enabled, even "
-"if the context menu is disabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], line numbers are displayed to the left of the text."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], sets the [code]step[/code] of the scrollbars to "
-"[code]0.25[/code] which results in smoother scrolling."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], any custom color properties that have been set for "
-"this [TextEdit] will be visible."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "String value of the [TextEdit]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Vertical scroll sensitivity."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"If [code]true[/code], enables text wrapping when it goes beyond the edge of "
-"what is visible."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Emitted when a breakpoint is placed via the breakpoint gutter."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Emitted when the cursor changes."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Emitted when the info icon is clicked."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Match case when searching."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Match whole words when searching."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Search from end to beginning."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Used to access the result column from [method search]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Used to access the result line from [method search]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Pastes the clipboard text over the selected text (or at the cursor's "
-"position)."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Erases the whole [TextEdit] text."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Selects the whole [TextEdit] text."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Redoes the previous action."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the background [Color] of this [TextEdit]. [member syntax_highlighting] "
-"has to be enabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the [Color] of the bookmark marker. [member syntax_highlighting] has to "
-"be enabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the [Color] of the breakpoints. [member breakpoint_gutter] has to be "
-"enabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the font [Color]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the [Color] of the selected text. [member override_selected_font_color] "
-"has to be enabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the [Color] of the line numbers. [member show_line_numbers] has to be "
-"enabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the [Color] of marked text."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the highlight [Color] of text selections."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the highlight [Color] of multiple occurrences. [member "
-"highlight_all_occurrences] has to be enabled."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the spacing between the lines."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the default [Font]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets a custom [Texture] for tab text characters."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid "Sets the [StyleBox] of this [TextEdit]."
-msgstr ""
-
-#: doc/classes/TextEdit.xml
-msgid ""
-"Sets the [StyleBox] of this [TextEdit] when [member readonly] is enabled."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-msgid "Generate an [PrimitiveMesh] from the text."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-msgid ""
-"Generate an [PrimitiveMesh] from the text.\n"
-"TextMesh can be generated only when using dynamic fonts with vector glyph "
-"contours. Bitmap fonts (including bitmap data in the TrueType/OpenType "
-"containers, like color emoji fonts) are not supported.\n"
-"The UV layout is arranged in 4 horizontal strips, top to bottom: 40% of the "
-"height for the front face, 40% for the back face, 10% for the outer edges "
-"and 10% for the inner edges."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-msgid "Step (in pixels) used to approximate Bézier curves."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-msgid ""
-"Depths of the mesh, if set to [code]0.0[/code] only front surface, is "
-"generated, and UV layout is changed to use full texture for the front face "
-"only."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-#, fuzzy
-msgid "[Font] used for the [TextMesh]'s text."
-msgstr "Kein Hinweis auf die bearbeitete Eigenschaft."
-
-#: doc/classes/TextMesh.xml
-msgid ""
-"Controls the text's horizontal alignment. Supports left, center and right. "
-"Set it to one of the [enum Align] constants."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-msgid "The size of one pixel's width on the text to scale it in 3D."
-msgstr ""
-
-#: doc/classes/TextMesh.xml
-msgid "The text to generate mesh from."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid "Texture for 2D and 3D."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"A texture works by registering an image in the video hardware, which then "
-"can be used in 3D models or 2D [Sprite] or GUI [Control].\n"
-"Textures are often created by loading them from a file. See [method "
-"@GDScript.load].\n"
-"[Texture] is a base for other resources. It cannot be used directly.\n"
-"[b]Note:[/b] The maximum texture size is 16384×16384 pixels due to graphics "
-"hardware limitations. Larger textures may fail to import."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Draws the texture using a [CanvasItem] with the [VisualServer] API at the "
-"specified [code]position[/code]. Equivalent to [method VisualServer."
-"canvas_item_add_texture_rect] with a rect at [code]position[/code] and the "
-"size of this [Texture]."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Draws the texture using a [CanvasItem] with the [VisualServer] API. "
-"Equivalent to [method VisualServer.canvas_item_add_texture_rect]."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Draws a part of the texture using a [CanvasItem] with the [VisualServer] "
-"API. Equivalent to [method VisualServer.canvas_item_add_texture_rect_region]."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Returns an [Image] that is a copy of data from this [Texture]. [Image]s can "
-"be accessed and manipulated directly."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid "Returns the texture height."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid "Returns the texture size."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid "Returns the texture width."
-msgstr ""
-
-#: doc/classes/Texture.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if this [Texture] has an alpha channel."
-msgstr "Liefert [code]true[/code] wenn das [Rect2i] einen Punkt beinhaltet."
-
-#: doc/classes/Texture.xml
-msgid ""
-"The texture's [enum Flags]. [enum Flags] are used to set various properties "
-"of the [Texture]."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Default flags. [constant FLAG_MIPMAPS], [constant FLAG_REPEAT] and [constant "
-"FLAG_FILTER] are enabled."
-msgstr ""
-
-#: doc/classes/Texture.xml doc/classes/VisualServer.xml
-msgid ""
-"Generates mipmaps, which are smaller versions of the same texture to use "
-"when zoomed out, keeping the aspect ratio."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Repeats the texture (instead of clamp to edge).\n"
-"[b]Note:[/b] Ignored when using an [AtlasTexture] as these don't support "
-"repetition."
-msgstr ""
-
-#: doc/classes/Texture.xml doc/classes/VisualServer.xml
-msgid "Uses a magnifying filter, to enable smooth zooming in of the texture."
-msgstr ""
-
-#: doc/classes/Texture.xml doc/classes/TextureLayered.xml
-#: doc/classes/VisualServer.xml
-msgid ""
-"Uses anisotropic mipmap filtering. Generates smaller versions of the same "
-"texture with different aspect ratios.\n"
-"This results in better-looking textures when viewed from oblique angles."
-msgstr ""
-
-#: doc/classes/Texture.xml doc/classes/VisualServer.xml
-msgid "Converts the texture to the sRGB color space."
-msgstr ""
-
-#: doc/classes/Texture.xml
-msgid ""
-"Repeats the texture with alternate sections mirrored.\n"
-"[b]Note:[/b] Ignored when using an [AtlasTexture] as these don't support "
-"repetition."
-msgstr ""
-
-#: doc/classes/Texture.xml doc/classes/VisualServer.xml
-msgid "Texture is a video surface."
-msgstr ""
-
-#: doc/classes/Texture3D.xml
-msgid "Texture with 3 dimensions."
-msgstr ""
-
-#: doc/classes/Texture3D.xml
-msgid ""
-"Texture3D is a 3-dimensional [Texture] that has a width, height, and depth. "
-"See also [TextureArray].\n"
-"[b]Note:[/b] [Texture3D]s can only be sampled in shaders in the GLES3 "
-"backend. In GLES2, their data can be accessed via scripting, but there is no "
-"way to render them in a hardware-accelerated manner."
-msgstr ""
-
-#: doc/classes/Texture3D.xml
-msgid ""
-"Creates the Texture3D with specified [code]width[/code], [code]height[/"
-"code], and [code]depth[/code]. See [enum Image.Format] for [code]format[/"
-"code] options. See [enum TextureLayered.Flags] enumerator for [code]flags[/"
-"code] options."
-msgstr ""
-
-#: doc/classes/TextureArray.xml
-msgid "Array of textures stored in a single primitive."
-msgstr ""
-
-#: doc/classes/TextureArray.xml
-msgid ""
-"[TextureArray]s store an array of [Image]s in a single [Texture] primitive. "
-"Each layer of the texture array has its own mipmap chain. This makes it is a "
-"good alternative to texture atlases. See also [Texture3D].\n"
-"[TextureArray]s must be displayed using shaders. After importing your file "
-"as a [TextureArray] and setting the appropriate Horizontal and Vertical "
-"Slices, display it by setting it as a uniform to a shader, for example "
-"(2D):\n"
-"[codeblock]\n"
-"shader_type canvas_item;\n"
-"\n"
-"uniform sampler2DArray tex;\n"
-"uniform int index;\n"
-"\n"
-"void fragment() {\n"
-"    COLOR = texture(tex, vec3(UV.x, UV.y, float(index)));\n"
-"}\n"
-"[/codeblock]\n"
-"Set the integer uniform \"index\" to show a particular part of the texture "
-"as defined by the Horizontal and Vertical Slices in the importer.\n"
-"[b]Note:[/b] When sampling an albedo texture from a texture array in 3D, the "
-"sRGB -> linear conversion hint ([code]hint_albedo[/code]) should be used to "
-"prevent colors from looking washed out:\n"
-"[codeblock]\n"
-"shader_type spatial;\n"
-"\n"
-"uniform sampler2DArray tex : hint_albedo;\n"
-"uniform int index;\n"
-"\n"
-"void fragment() {\n"
-"    ALBEDO = texture(tex, vec3(UV.x, UV.y, float(index)));\n"
-"}\n"
-"[/codeblock]\n"
-"[b]Note:[/b] [TextureArray]s can only be sampled in shaders in the GLES3 "
-"backend. In GLES2, their data can be accessed via scripting, but there is no "
-"way to render them in a hardware-accelerated manner."
-msgstr ""
-
-#: doc/classes/TextureArray.xml
-msgid ""
-"Creates the TextureArray with specified [code]width[/code], [code]height[/"
-"code], and [code]depth[/code]. See [enum Image.Format] for [code]format[/"
-"code] options. See [enum TextureLayered.Flags] enumerator for [code]flags[/"
-"code] options."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Texture-based button. Supports Pressed, Hover, Disabled and Focused states."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"[TextureButton] has the same functionality as [Button], except it uses "
-"sprites instead of Godot's [Theme] resource. It is faster to create, but it "
-"doesn't support localization like more complex [Control]s.\n"
-"The \"normal\" state must contain a texture ([member texture_normal]); other "
-"textures are optional.\n"
-"See also [BaseButton] which contains common properties and methods "
-"associated with this node."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"If [code]true[/code], the texture stretches to the edges of the node's "
-"bounding rectangle using the [member stretch_mode]. If [code]false[/code], "
-"the texture will not scale with the node."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Controls the texture's behavior when you resize the node's bounding "
-"rectangle, [b]only if[/b] [member expand] is [code]true[/code]. Set it to "
-"one of the [enum StretchMode] constants. See the constants to learn more."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Pure black and white [BitMap] image to use for click detection. On the mask, "
-"white pixels represent the button's clickable area. Use it to create buttons "
-"with curved shapes."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Texture to display when the node is disabled. See [member BaseButton."
-"disabled]."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid "Texture to display when the node has mouse or keyboard focus."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid "Texture to display when the mouse hovers the node."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Texture to display by default, when the node is [b]not[/b] in the disabled, "
-"focused, hover or pressed state."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Texture to display on mouse down over the node, if the node has keyboard "
-"focus and the player presses the Enter key or if the player presses the "
-"[member BaseButton.shortcut] key."
-msgstr ""
-
-#: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
-msgid "Scale to fit the node's bounding rectangle."
-msgstr ""
-
-#: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
-msgid "Tile inside the node's bounding rectangle."
-msgstr ""
-
-#: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
-msgid ""
-"The texture keeps its original size and stays in the bounding rectangle's "
-"top-left corner."
-msgstr ""
-
-#: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
-msgid ""
-"The texture keeps its original size and stays centered in the node's "
-"bounding rectangle."
-msgstr ""
-
-#: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
-msgid ""
-"Scale the texture to fit the node's bounding rectangle, but maintain the "
-"texture's aspect ratio."
-msgstr ""
-
-#: doc/classes/TextureButton.xml
-msgid ""
-"Scale the texture to fit the node's bounding rectangle, center it, and "
-"maintain its aspect ratio."
-msgstr ""
-
-#: doc/classes/TextureButton.xml doc/classes/TextureRect.xml
-msgid ""
-"Scale the texture so that the shorter side fits the bounding rectangle. The "
-"other side clips to the node's limits."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid "Base class for 3D texture types."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Base class for [Texture3D] and [TextureArray]. Cannot be used directly, but "
-"contains all the functions necessary for accessing and using [Texture3D] and "
-"[TextureArray]. Data is set on a per-layer basis. For [Texture3D]s, the "
-"layer specifies the depth or Z-index, they can be treated as a bunch of 2D "
-"slices. Similarly, for [TextureArray]s, the layer specifies the array layer."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Returns the depth of the texture. Depth is the 3rd dimension (typically Z-"
-"axis)."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Returns the current format being used by this texture. See [enum Image."
-"Format] for details."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Returns the height of the texture. Height is typically represented by the Y-"
-"axis."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Returns an [Image] resource with the data from specified [code]layer[/code]."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Returns the width of the texture. Width is typically represented by the X-"
-"axis."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Partially sets the data for a specified [code]layer[/code] by overwriting "
-"using the data of the specified [code]image[/code]. [code]x_offset[/code] "
-"and [code]y_offset[/code] determine where the [Image] is \"stamped\" over "
-"the texture. The [code]image[/code] must fit within the texture."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Sets the data for the specified layer. Data takes the form of a 2-"
-"dimensional [Image] resource."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid "Returns a dictionary with all the data used by this texture."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid "Specifies which [enum Flags] apply to this texture."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Default flags for [TextureArray]. [constant FLAG_MIPMAPS], [constant "
-"FLAG_REPEAT] and [constant FLAG_FILTER] are enabled."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid "Default flags for [Texture3D]. [constant FLAG_FILTER] is enabled."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-#, fuzzy
-msgid "Texture will generate mipmaps on creation."
-msgstr "Textur wird nicht wiederholt."
-
-#: doc/classes/TextureLayered.xml
-msgid "Texture will repeat when UV used is outside the 0-1 range."
-msgstr ""
-
-#: doc/classes/TextureLayered.xml
-msgid ""
-"Use filtering when reading from texture. Filtering smooths out pixels. "
-"Turning filtering off is slightly faster and more appropriate when you need "
-"access to individual pixels."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Texture-based progress bar. Useful for loading screens and life or stamina "
-"bars."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"TextureProgress works like [ProgressBar], but uses up to 3 textures instead "
-"of Godot's [Theme] resource. It can be used to create horizontal, vertical "
-"and radial progress bars."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The fill direction. See [enum FillMode] for possible values."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"If [code]true[/code], Godot treats the bar's textures like in "
-"[NinePatchRect]. Use the [code]stretch_margin_*[/code] properties like "
-"[member stretch_margin_bottom] to set up the nine patch's 3×3 grid. When "
-"using a radial [member fill_mode], this setting will enable stretching."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Offsets [member texture_progress] if [member fill_mode] is [constant "
-"FILL_CLOCKWISE] or [constant FILL_COUNTER_CLOCKWISE]."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Upper limit for the fill of [member texture_progress] if [member fill_mode] "
-"is [constant FILL_CLOCKWISE] or [constant FILL_COUNTER_CLOCKWISE]. When the "
-"node's [code]value[/code] is equal to its [code]max_value[/code], the "
-"texture fills up to this angle.\n"
-"See [member Range.value], [member Range.max_value]."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Starting angle for the fill of [member texture_progress] if [member "
-"fill_mode] is [constant FILL_CLOCKWISE] or [constant "
-"FILL_COUNTER_CLOCKWISE]. When the node's [code]value[/code] is equal to its "
-"[code]min_value[/code], the texture doesn't show up at all. When the "
-"[code]value[/code] increases, the texture fills and tends towards [member "
-"radial_fill_degrees]."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"The height of the 9-patch's bottom row. A margin of 16 means the 9-slice's "
-"bottom corners and side will have a height of 16 pixels. You can set all 4 "
-"margin values individually to create panels with non-uniform borders."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The width of the 9-patch's left column."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The width of the 9-patch's right column."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The height of the 9-patch's top row."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"[Texture] that draws over the progress bar. Use it to add highlights or an "
-"upper-frame that hides part of [member texture_progress]."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"[Texture] that clips based on the node's [code]value[/code] and [member "
-"fill_mode]. As [code]value[/code] increased, the texture fills up. It shows "
-"entirely when [code]value[/code] reaches [code]max_value[/code]. It doesn't "
-"show at all if [code]value[/code] is equal to [code]min_value[/code].\n"
-"The [code]value[/code] property comes from [Range]. See [member Range."
-"value], [member Range.min_value], [member Range.max_value]."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"The offset of [member texture_progress]. Useful for [member texture_over] "
-"and [member texture_under] with fancy borders, to avoid transparent margins "
-"in your progress texture."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "[Texture] that draws under the progress bar. The bar's background."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Multiplies the color of the bar's [code]texture_over[/code] texture. The "
-"effect is similar to [member CanvasItem.modulate], except it only affects "
-"this specific texture instead of the entire node."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Multiplies the color of the bar's [code]texture_progress[/code] texture."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "Multiplies the color of the bar's [code]texture_under[/code] texture."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The [member texture_progress] fills from left to right."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The [member texture_progress] fills from right to left."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The [member texture_progress] fills from top to bottom."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid "The [member texture_progress] fills from bottom to top."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Turns the node into a radial bar. The [member texture_progress] fills "
-"clockwise. See [member radial_center_offset], [member radial_initial_angle] "
-"and [member radial_fill_degrees] to control the way the bar fills up."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Turns the node into a radial bar. The [member texture_progress] fills "
-"counterclockwise. See [member radial_center_offset], [member "
-"radial_initial_angle] and [member radial_fill_degrees] to control the way "
-"the bar fills up."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"The [member texture_progress] fills from the center, expanding both towards "
-"the left and the right."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"The [member texture_progress] fills from the center, expanding both towards "
-"the top and the bottom."
-msgstr ""
-
-#: doc/classes/TextureProgress.xml
-msgid ""
-"Turns the node into a radial bar. The [member texture_progress] fills "
-"radially from the center, expanding both clockwise and counterclockwise. See "
-"[member radial_center_offset], [member radial_initial_angle] and [member "
-"radial_fill_degrees] to control the way the bar fills up."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid "Control for drawing textures."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid ""
-"Used to draw icons and sprites in a user interface. The texture's placement "
-"can be controlled with the [member stretch_mode] property. It can scale, "
-"tile, or stay centered inside its bounding rectangle.\n"
-"[b]Note:[/b] You should enable [member flip_v] when using a TextureRect to "
-"display a [ViewportTexture]. Alternatively, you can enable [member Viewport."
-"render_target_v_flip] on the Viewport. Otherwise, the image will appear "
-"upside down."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid "If [code]true[/code], the texture scales to fit its bounding rectangle."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid ""
-"Controls the texture's behavior when resizing the node's bounding rectangle. "
-"See [enum StretchMode]."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid "The node's [Texture] resource."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid ""
-"Scale to fit the node's bounding rectangle, only if [code]expand[/code] is "
-"[code]true[/code]. Default [code]stretch_mode[/code], for backwards "
-"compatibility. Until you set [code]expand[/code] to [code]true[/code], the "
-"texture will behave like [constant STRETCH_KEEP]."
-msgstr ""
-
-#: doc/classes/TextureRect.xml
-msgid ""
-"Scale the texture to fit the node's bounding rectangle, center it and "
-"maintain its aspect ratio."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Theme for controls."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"A theme for skinning controls. Controls can be skinned individually, but for "
-"complex applications, it's more practical to just create a global theme that "
-"defines everything. This theme can be applied to any [Control]; the Control "
-"and its children will automatically use it.\n"
-"Theme resources can alternatively be loaded by writing them in a [code]."
-"theme[/code] file, see the documentation for more information."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Adds an empty theme type for every valid data type.\n"
-"[b]Note:[/b] Empty types are not saved with the theme. This method only "
-"exists to perform in-memory changes to the resource. Use available "
-"[code]set_*[/code] methods to add theme items."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Clears all values on the theme."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Clears the [Color] at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Clears the constant at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Clears the [Font] at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Clears the icon at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Clears [StyleBox] at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Clears the theme item of [code]data_type[/code] at [code]name[/code] if the "
-"theme has [code]theme_type[/code]."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Unmarks [code]theme_type[/code] as being a variation of another theme type. "
-"See [method set_type_variation]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Sets the theme's values to a copy of the default theme values."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Sets the theme's values to a copy of a given theme."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns the [Color] at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns all the [Color]s as a [PoolStringArray] filled with each [Color]'s "
-"name, for use in [method get_color], if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the [Color] types as a [PoolStringArray] filled with unique type "
-"names, for use in [method get_color] and/or [method get_color_list]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns the constant at [code]name[/code] if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns all the constants as a [PoolStringArray] filled with each constant's "
-"name, for use in [method get_constant], if the theme has [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the constant types as a [PoolStringArray] filled with unique "
-"type names, for use in [method get_constant] and/or [method "
-"get_constant_list]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns the [Font] at [code]name[/code] if the theme has [code]theme_type[/"
-"code]. If such item does not exist and [member default_font] is set on the "
-"theme, the default font will be returned."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns all the [Font]s as a [PoolStringArray] filled with each [Font]'s "
-"name, for use in [method get_font], if the theme has [code]theme_type[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the [Font] types as a [PoolStringArray] filled with unique type "
-"names, for use in [method get_font] and/or [method get_font_list]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns the icon [Texture] at [code]name[/code] if the theme has "
-"[code]theme_type[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns all the icons as a [PoolStringArray] filled with each [Texture]'s "
-"name, for use in [method get_icon], if the theme has [code]theme_type[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the icon types as a [PoolStringArray] filled with unique type "
-"names, for use in [method get_icon] and/or [method get_icon_list]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns the [StyleBox] at [code]name[/code] if the theme has "
-"[code]theme_type[/code].\n"
-"Valid [code]name[/code]s may be found using [method get_stylebox_list]. "
-"Valid [code]theme_type[/code]s may be found using [method "
-"get_stylebox_types]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the [StyleBox]s as a [PoolStringArray] filled with each "
-"[StyleBox]'s name, for use in [method get_stylebox], if the theme has "
-"[code]theme_type[/code].\n"
-"Valid [code]theme_type[/code]s may be found using [method "
-"get_stylebox_types]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the [StyleBox] types as a [PoolStringArray] filled with unique "
-"type names, for use in [method get_stylebox] and/or [method "
-"get_stylebox_list]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns the theme item of [code]data_type[/code] at [code]name[/code] if the "
-"theme has [code]theme_type[/code].\n"
-"Valid [code]name[/code]s may be found using [method get_theme_item_list] or "
-"a data type specific method. Valid [code]theme_type[/code]s may be found "
-"using [method get_theme_item_types] or a data type specific method."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the theme items of [code]data_type[/code] as a [PoolStringArray] "
-"filled with each theme items's name, for use in [method get_theme_item] or a "
-"data type specific method, if the theme has [code]theme_type[/code].\n"
-"Valid [code]theme_type[/code]s may be found using [method "
-"get_theme_item_types] or a data type specific method."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the theme items of [code]data_type[/code] types as a "
-"[PoolStringArray] filled with unique type names, for use in [method "
-"get_theme_item], [method get_theme_item_list] or data type specific methods."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns all the theme types as a [PoolStringArray] filled with unique type "
-"names, for use in other [code]get_*[/code] functions of this theme.\n"
-"[b]Note:[/b] [code]theme_type[/code] has no effect and will be removed in "
-"future version."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Returns the name of the base theme type if [code]theme_type[/code] is a "
-"valid variation type. Returns an empty string otherwise."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns a list of all type variations for the given [code]base_type[/code]."
-msgstr ""
-"Gibt ein Array aller Zellen mit der angegebenen Kachel [code]index[/code] "
-"zurück."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if [Color] with [code]name[/code] is in "
-"[code]theme_type[/code].\n"
-"Returns [code]false[/code] if the theme does not have [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if constant with [code]name[/code] is in "
-"[code]theme_type[/code].\n"
-"Returns [code]false[/code] if the theme does not have [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if this theme has a valid [member default_font] "
-"value."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if [Font] with [code]name[/code] is in "
-"[code]theme_type[/code].\n"
-"Returns [code]false[/code] if the theme does not have [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if icon [Texture] with [code]name[/code] is in "
-"[code]theme_type[/code].\n"
-"Returns [code]false[/code] if the theme does not have [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if [StyleBox] with [code]name[/code] is in "
-"[code]theme_type[/code].\n"
-"Returns [code]false[/code] if the theme does not have [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if a theme item of [code]data_type[/code] with "
-"[code]name[/code] is in [code]theme_type[/code].\n"
-"Returns [code]false[/code] if the theme does not have [code]theme_type[/"
-"code]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if [code]theme_type[/code] is marked as a "
-"variation of [code]base_type[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der angegebene Track importiert ist. "
-"Andernfalls wird [code]false[/code] zurückgegeben."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Adds missing and overrides existing definitions with values from the "
-"[code]other[/code] [Theme].\n"
-"[b]Note:[/b] This modifies the current theme. If you want to merge two "
-"themes together without modifying either one, create a new empty theme and "
-"merge the other two into it one after another."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"Removes the theme type, gracefully discarding defined theme items. If the "
-"type is a variation, this information is also erased. If the type is a base "
-"for type variations, those variations lose their base."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Renames the [Color] at [code]old_name[/code] to [code]name[/code] if the "
-"theme has [code]theme_type[/code]. If [code]name[/code] is already taken, "
-"this method fails."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Renames the constant at [code]old_name[/code] to [code]name[/code] if the "
-"theme has [code]theme_type[/code]. If [code]name[/code] is already taken, "
-"this method fails."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Renames the [Font] at [code]old_name[/code] to [code]name[/code] if the "
-"theme has [code]theme_type[/code]. If [code]name[/code] is already taken, "
-"this method fails."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Renames the icon at [code]old_name[/code] to [code]name[/code] if the theme "
-"has [code]theme_type[/code]. If [code]name[/code] is already taken, this "
-"method fails."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Renames [StyleBox] at [code]old_name[/code] to [code]name[/code] if the "
-"theme has [code]theme_type[/code]. If [code]name[/code] is already taken, "
-"this method fails."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn das Array [code]value[/code] enthält."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Renames the theme item of [code]data_type[/code] at [code]old_name[/code] to "
-"[code]name[/code] if the theme has [code]theme_type[/code]. If [code]name[/"
-"code] is already taken, this method fails."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Sets the theme's [Color] to [code]color[/code] at [code]name[/code] in "
-"[code]theme_type[/code].\n"
-"Creates [code]theme_type[/code] if the theme does not have it."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Sets the theme's constant to [code]constant[/code] at [code]name[/code] in "
-"[code]theme_type[/code].\n"
-"Creates [code]theme_type[/code] if the theme does not have it."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Sets the theme's [Font] to [code]font[/code] at [code]name[/code] in "
-"[code]theme_type[/code].\n"
-"Creates [code]theme_type[/code] if the theme does not have it."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Sets the theme's icon [Texture] to [code]texture[/code] at [code]name[/code] "
-"in [code]theme_type[/code].\n"
-"Creates [code]theme_type[/code] if the theme does not have it."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Sets theme's [StyleBox] to [code]stylebox[/code] at [code]name[/code] in "
-"[code]theme_type[/code].\n"
-"Creates [code]theme_type[/code] if the theme does not have it."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid ""
-"Sets the theme item of [code]data_type[/code] to [code]value[/code] at "
-"[code]name[/code] in [code]theme_type[/code].\n"
-"Does nothing if the [code]value[/code] type does not match [code]data_type[/"
-"code].\n"
-"Creates [code]theme_type[/code] if the theme does not have it."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn Einstellung welche durch [code]name[/"
-"code]angegeben ist, existiert, ansonsten [code]false[/code]."
-
-#: doc/classes/Theme.xml
-msgid ""
-"Marks [code]theme_type[/code] as a variation of [code]base_type[/code].\n"
-"This adds [code]theme_type[/code] as a suggested option for [member Control."
-"theme_type_variation] on a [Control] that is of the [code]base_type[/code] "
-"class.\n"
-"Variations can also be nested, i.e. [code]base_type[/code] can be another "
-"variation. If a chain of variations ends with a [code]base_type[/code] "
-"matching the class of the [Control], the whole chain is going to be "
-"suggested as options.\n"
-"[b]Note:[/b] Suggestions only show up if this theme resource is set as the "
-"project default theme. See [member ProjectSettings.gui/theme/custom]."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid ""
-"The default font of this [Theme] resource. Used as a fallback value for font "
-"items defined in this theme, but having invalid values. If this value is "
-"also invalid, the global default value is used.\n"
-"Use [method has_default_font] to check if this value is valid."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Theme's [Color] item type."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid "Theme's constant item type."
-msgstr "Der Übergangstyp."
-
-#: doc/classes/Theme.xml
-msgid "Theme's [Font] item type."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Theme's icon [Texture] item type."
-msgstr ""
-
-#: doc/classes/Theme.xml
-msgid "Theme's [StyleBox] item type."
-msgstr ""
-
-#: doc/classes/Theme.xml
-#, fuzzy
-msgid "Maximum value for the DataType enum."
-msgstr "Maximaler Wert für das Modus-Enum."
-
-#: doc/classes/Thread.xml
-msgid "A unit of execution in a process."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid ""
-"A unit of execution in a process. Can run methods on [Object]s "
-"simultaneously. The use of synchronization via [Mutex] or [Semaphore] is "
-"advised if working with shared objects.\n"
-"[b]Note:[/b] Breakpoints won't break on code if it's running in a thread. "
-"This is a current limitation of the GDScript debugger."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid "Using multiple threads"
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid "Thread-safe APIs"
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid ""
-"Returns the current [Thread]'s ID, uniquely identifying it among all "
-"threads. If the [Thread] is not running this returns an empty string."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid ""
-"Returns [code]true[/code] if this [Thread] has been started. Once started, "
-"this will return [code]true[/code] until it is joined using [method "
-"wait_to_finish]. For checking if a [Thread] is still executing its task, use "
-"[method is_alive]."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid ""
-"Returns [code]true[/code] if this [Thread] is currently running. This is "
-"useful for determining if [method wait_to_finish] can be called without "
-"blocking the calling thread.\n"
-"To check if a [Thread] is joinable, use [method is_active]."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid ""
-"Starts a new [Thread] that runs [code]method[/code] on object "
-"[code]instance[/code] with [code]userdata[/code] passed as an argument. Even "
-"if no userdata is passed, [code]method[/code] must accept one argument and "
-"it will be null. The [code]priority[/code] of the [Thread] can be changed by "
-"passing a value from the [enum Priority] enum.\n"
-"Returns [constant OK] on success, or [constant ERR_CANT_CREATE] on failure."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid ""
-"Joins the [Thread] and waits for it to finish. Returns the output of the "
-"method passed to [method start].\n"
-"Should either be used when you want to retrieve the value returned from the "
-"method called by the [Thread] or before freeing the instance that contains "
-"the [Thread].\n"
-"To determine if this can be called without blocking the calling thread, "
-"check if [method is_alive] is [code]false[/code].\n"
-"[b]Note:[/b] After the [Thread] finishes joining it will be disposed. If you "
-"want to use it again you will have to create a new instance of it."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid "A thread running with lower priority than normally."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid "A thread with a standard priority."
-msgstr ""
-
-#: doc/classes/Thread.xml
-msgid "A thread running with higher priority than normally."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Node for 2D tile-based maps."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Node for 2D tile-based maps. Tilemaps use a [TileSet] which contain a list "
-"of tiles (textures plus optional collision, navigation, and/or occluder "
-"shapes) which are used to create grid-based maps.\n"
-"When doing physics queries against the tilemap, the cell coordinates are "
-"encoded as [code]metadata[/code] for each detected collision shape returned "
-"by methods such as [method Physics2DDirectSpaceState.intersect_shape], "
-"[method Physics2DDirectBodyState.get_contact_collider_shape_metadata], etc."
-msgstr ""
-
-#: doc/classes/TileMap.xml doc/classes/TileSet.xml
-msgid "Using Tilemaps"
-msgstr ""
-
-#: doc/classes/TileMap.xml doc/classes/TileSet.xml
-msgid "2D Hexagonal Demo"
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Clears all cells."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Clears cells that do not exist in the tileset."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns the tile index of the given cell. If no tile exists in the cell, "
-"returns [constant INVALID_CELL]."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns the coordinate (subtile column and row) of the autotile variation in "
-"the tileset. Returns a zero vector if the cell doesn't have autotiling."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns the tile index of the cell given by a Vector2. If no tile exists in "
-"the cell, returns [constant INVALID_CELL]."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Returns [code]true[/code] if the given collision layer bit is set."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Returns [code]true[/code] if the given collision mask bit is set."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns a [Vector2] array with the positions of all cells containing a tile "
-"from the tileset (i.e. a tile index different from [code]-1[/code])."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-#, fuzzy
-msgid ""
-"Returns an array of all cells with the given tile index specified in "
-"[code]id[/code]."
-msgstr ""
-"Gibt ein Array aller Zellen mit der angegebenen Kachel [code]index[/code] "
-"zurück."
-
-#: doc/classes/TileMap.xml
-msgid "Returns a rectangle enclosing the used (non-empty) tiles of the map."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns [code]true[/code] if the given cell is transposed, i.e. the X and Y "
-"axes are swapped."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Returns [code]true[/code] if the given cell is flipped in the X axis."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Returns [code]true[/code] if the given cell is flipped in the Y axis."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns the local position of the top left corner of the cell corresponding "
-"to the given tilemap (grid-based) coordinates.\n"
-"To get the global position, use [method Node2D.to_global]:\n"
-"[codeblock]\n"
-"var local_position = my_tilemap.map_to_world(map_position)\n"
-"var global_position = my_tilemap.to_global(local_position)\n"
-"[/codeblock]\n"
-"Optionally, the tilemap's half offset can be ignored."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Sets the tile index for the given cell.\n"
-"An index of [code]-1[/code] clears the cell.\n"
-"Optionally, the tile can also be flipped, transposed, or given autotile "
-"coordinates. The autotile coordinate refers to the column and row of the "
-"subtile.\n"
-"[b]Note:[/b] Data such as navigation polygons and collision shapes are not "
-"immediately updated for performance reasons.\n"
-"If you need these to be immediately updated, you can call [method "
-"update_dirty_quadrants].\n"
-"Overriding this method also overrides it internally, allowing custom logic "
-"to be implemented when tiles are placed/removed:\n"
-"[codeblock]\n"
-"func set_cell(x, y, tile, flip_x=false, flip_y=false, transpose=false, "
-"autotile_coord=Vector2()):\n"
-"    # Write your custom logic here.\n"
-"    # To call the default method:\n"
-"    .set_cell(x, y, tile, flip_x, flip_y, transpose, autotile_coord)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Sets the tile index for the cell given by a Vector2.\n"
-"An index of [code]-1[/code] clears the cell.\n"
-"Optionally, the tile can also be flipped, transposed, or given autotile "
-"coordinates. The autotile coordinate refers to the column and row of the "
-"subtile.\n"
-"[b]Note:[/b] Data such as navigation polygons and collision shapes are not "
-"immediately updated for performance reasons.\n"
-"If you need these to be immediately updated, you can call [method "
-"update_dirty_quadrants]."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Sets the given collision layer bit."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Sets the given collision mask bit."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Applies autotiling rules to the cell (and its adjacent cells) referenced by "
-"its grid-based X and Y coordinates."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Applies autotiling rules to the cells in the given region (specified by grid-"
-"based X and Y coordinates).\n"
-"Calling with invalid (or missing) parameters applies autotiling rules for "
-"the entire tilemap."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Updates the tile map's quadrants, allowing things such as navigation and "
-"collision shapes to be immediately used if modified."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Returns the tilemap (grid-based) coordinates corresponding to the given "
-"local position.\n"
-"To use this with a global position, first determine the local position with "
-"[method Node2D.to_local]:\n"
-"[codeblock]\n"
-"var local_position = my_tilemap.to_local(global_position)\n"
-"var map_position = my_tilemap.world_to_map(local_position)\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/TileMap.xml
-#, fuzzy
-msgid "If [code]true[/code], this TileMap bakes a navigation region."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/TileMap.xml
-msgid "If [code]true[/code], the cell's UVs will be clipped."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "The custom [Transform2D] to be applied to the TileMap's cells."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Amount to offset alternating tiles. See [enum HalfOffset] for possible "
-"values."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"The TileMap's quadrant size. Optimizes drawing by batching, using chunks of "
-"this size."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "The TileMap's cell size."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Position for tile origin. See [enum TileOrigin] for possible values."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"If [code]true[/code], the TileMap's direct children will be drawn in order "
-"of their Y coordinate."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"If [code]true[/code], the textures will be centered in the middle of each "
-"tile. This is useful for certain isometric or top-down modes when textures "
-"are made larger or smaller than the tiles (e.g. to avoid flickering on tile "
-"edges). The offset is still applied, but from the center of the tile. If "
-"used, [member compatibility_mode] is ignored.\n"
-"If [code]false[/code], the texture position start in the top-left corner "
-"unless [member compatibility_mode] is enabled."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Bounce value for static body collisions (see [code]collision_use_kinematic[/"
-"code])."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"Friction value for static body collisions (see "
-"[code]collision_use_kinematic[/code])."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"The collision layer(s) for all colliders in the TileMap. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"The collision mask(s) for all colliders in the TileMap. See [url=$DOCS_URL/"
-"tutorials/physics/physics_introduction.html#collision-layers-and-"
-"masks]Collision layers and masks[/url] in the documentation for more "
-"information."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"If [code]true[/code], TileMap collisions will be handled as a kinematic "
-"body. If [code]false[/code], collisions will be handled as static body."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"If [code]true[/code], this tilemap's collision shape will be added to the "
-"collision shape of the parent. The parent has to be a [CollisionObject2D]."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"If [code]true[/code], the compatibility with the tilemaps made in Godot 3.1 "
-"or earlier is maintained (textures move when the tile origin changes and "
-"rotate if the texture size is not homogeneous). This mode presents problems "
-"when doing [code]flip_h[/code], [code]flip_v[/code] and [code]transpose[/"
-"code] tile operations on non-homogeneous isometric tiles (e.g. 2:1), in "
-"which the texture could not coincide with the collision, thus it is not "
-"recommended for isometric or non-square tiles.\n"
-"If [code]false[/code], the textures do not move when doing [code]flip_h[/"
-"code], [code]flip_v[/code] operations if no offset is used, nor when "
-"changing the tile origin.\n"
-"The compatibility mode doesn't work with the [member centered_textures] "
-"option, because displacing textures with the [member cell_tile_origin] "
-"option or in irregular tiles is not relevant when centering those textures."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "The TileMap orientation mode. See [enum Mode] for possible values."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "The navigation layers the TileMap generates its navigation regions in."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"The light mask assigned to all light occluders in the TileMap. The TileSet's "
-"light occluders will cast shadows only from Light2D(s) that have the same "
-"light mask(s)."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid ""
-"If [code]true[/code], collision shapes are visible in the editor. Doesn't "
-"affect collision shapes visibility at runtime. To show collision shapes at "
-"runtime, enable [b]Visible Collision Shapes[/b] in the [b]Debug[/b] menu "
-"instead."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "The assigned [TileSet]."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Emitted when a tilemap setting has changed."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Returned when a cell doesn't exist."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Orthogonal orientation mode."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Isometric orientation mode."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Custom orientation mode."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Half offset on the X coordinate."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Half offset on the Y coordinate."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Half offset disabled."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Half offset on the X coordinate (negative)."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Half offset on the Y coordinate (negative)."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Tile origin at its top-left corner."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Tile origin at its center."
-msgstr ""
-
-#: doc/classes/TileMap.xml
-msgid "Tile origin at its bottom-left corner."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Tile library for tilemaps."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"A TileSet is a library of tiles for a [TileMap]. It contains a list of "
-"tiles, each consisting of a sprite and optional collision shapes.\n"
-"Tiles are referenced by a unique integer ID."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Determines when the auto-tiler should consider two different auto-tile IDs "
-"to be bound together.\n"
-"[b]Note:[/b] [code]neighbor_id[/code] will be [code]-1[/code] ([constant "
-"TileMap.INVALID_CELL]) when checking a tile against an empty neighbor tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Clears all bitmask information of the autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the bitmask of the subtile from an autotile given its coordinates.\n"
-"The value is the sum of the values in [enum AutotileBindings] present in the "
-"subtile (e.g. a value of 5 means the bitmask has bindings in both the top "
-"left and top right)."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the [enum BitmaskMode] of the autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the subtile that's being used as an icon in an atlas/autotile given "
-"its coordinates.\n"
-"The subtile defined as the icon will be used as a fallback when the atlas/"
-"autotile's bitmask information is incomplete. It will also be used to "
-"represent it in the TileSet editor."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the light occluder of the subtile from an atlas/autotile given its "
-"coordinates."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the navigation polygon of the subtile from an atlas/autotile given "
-"its coordinates."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the size of the subtiles in an atlas/autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the spacing between subtiles of the atlas/autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the priority of the subtile from an autotile given its coordinates.\n"
-"When more than one subtile has the same bitmask value, one of them will be "
-"picked randomly for drawing. Its priority will define how often it will be "
-"picked."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the drawing index of the subtile from an atlas/autotile given its "
-"coordinates."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the bitmask of the subtile from an autotile given its coordinates.\n"
-"The value is the sum of the values in [enum AutotileBindings] present in the "
-"subtile (e.g. a value of 5 means the bitmask has bindings in both the top "
-"left and top right)."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the [enum BitmaskMode] of the autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the subtile that will be used as an icon in an atlas/autotile given its "
-"coordinates.\n"
-"The subtile defined as the icon will be used as a fallback when the atlas/"
-"autotile's bitmask information is incomplete. It will also be used to "
-"represent it in the TileSet editor."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the light occluder of the subtile from an atlas/autotile given its "
-"coordinates."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the navigation polygon of the subtile from an atlas/autotile given its "
-"coordinates."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the size of the subtiles in an atlas/autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the spacing between subtiles of the atlas/autotile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the priority of the subtile from an autotile given its coordinates.\n"
-"When more than one subtile has the same bitmask value, one of them will be "
-"picked randomly for drawing. Its priority will define how often it will be "
-"picked."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the drawing index of the subtile from an atlas/autotile given its "
-"coordinates."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Clears all tiles."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Creates a new tile with the given ID."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the first tile matching the given name."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns the ID following the last currently used ID, useful when creating a "
-"new tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns an array of all currently used tile IDs."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Removes the given tile ID."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Adds a shape to the tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's light occluder."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's material."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's modulation color."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's name."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the navigation polygon of the tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the offset of the tile's navigation polygon."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's normal map texture."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the offset of the tile's light occluder."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile sub-region in the texture."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns a tile's given shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the number of shapes assigned to a tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the offset of a tile's shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the one-way collision value of a tile's shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the [Transform2D] of a tile's shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Returns an array of dictionaries describing the tile's shapes.\n"
-"[b]Dictionary structure in the array returned by this method:[/b]\n"
-"[codeblock]\n"
-"{\n"
-"    \"autotile_coord\": Vector2,\n"
-"    \"one_way\": bool,\n"
-"    \"one_way_margin\": int,\n"
-"    \"shape\": CollisionShape2D,\n"
-"    \"shape_transform\": Transform2D,\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's texture."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the texture offset of the tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's [enum TileMode]."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Returns the tile's Z index (drawing layer)."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets a light occluder for the tile."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's material."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the tile's modulation color.\n"
-"[b]Note:[/b] Modulation is performed by setting the tile's vertex color. To "
-"access this in a shader, use [code]COLOR[/code] rather than [code]MODULATE[/"
-"code] (which instead accesses the [TileMap]'s [member CanvasItem.modulate] "
-"property)."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's name."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's navigation polygon."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets an offset for the tile's navigation polygon."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the tile's normal map texture.\n"
-"[b]Note:[/b] Godot expects the normal map to use X+, Y-, and Z+ coordinates. "
-"See [url=http://wiki.polycount.com/wiki/"
-"Normal_Map_Technical_Details#Common_Swizzle_Coordinates]this page[/url] for "
-"a comparison of normal map coordinates expected by popular engines."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets an offset for the tile's light occluder."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid ""
-"Sets the tile's sub-region in the texture. This is common in texture atlases."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets a shape for the tile, enabling collision."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the offset of a tile's shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Enables one-way collision on a tile's shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets a [Transform2D] on a tile's shape."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets an array of shapes for the tile, enabling collision."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's texture."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's texture offset."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's [enum TileMode]."
-msgstr ""
-
-#: doc/classes/TileSet.xml
-msgid "Sets the tile's drawing index."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "Time singleton for working with time."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"The Time singleton allows converting time between various formats and also "
-"getting time information from the system.\n"
-"This class conforms with as many of the ISO 8601 standards as possible. All "
-"dates follow the Proleptic Gregorian calendar. As such, the day before "
-"[code]1582-10-15[/code] is [code]1582-10-14[/code], not [code]1582-10-04[/"
-"code]. The year before 1 AD (aka 1 BC) is number [code]0[/code], with the "
-"year before that (2 BC) being [code]-1[/code], etc.\n"
-"Conversion methods assume \"the same timezone\", and do not handle timezone "
-"conversions or DST automatically. Leap seconds are also not handled, they "
-"must be done manually if desired. Suffixes such as \"Z\" are not handled, "
-"you need to strip them away manually.\n"
-"When getting time information from the system, the time can either be in the "
-"local timezone or UTC depending on the [code]utc[/code] parameter. However, "
-"the [method get_unix_time_from_system] method always returns the time in "
-"UTC.\n"
-"[b]Important:[/b] The [code]_from_system[/code] methods use the system clock "
-"that the user can manually set. [b]Never use[/b] this method for precise "
-"time calculation since its results are subject to automatic adjustments by "
-"the user or the operating system. [b]Always use[/b] [method get_ticks_usec] "
-"or [method get_ticks_msec] for precise time calculation instead, since they "
-"are guaranteed to be monotonic (i.e. never decrease)."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current date as a dictionary of keys: [code]year[/code], "
-"[code]month[/code], [code]day[/code], [code]weekday[/code], and [code]dst[/"
-"code] (Daylight Savings Time).\n"
-"The returned values are in the system's local time when [code]utc[/code] is "
-"false, otherwise they are in UTC."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given Unix timestamp to a dictionary of keys: [code]year[/"
-"code], [code]month[/code], [code]day[/code], and [code]weekday[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current date as an ISO 8601 date string (YYYY-MM-DD).\n"
-"The returned values are in the system's local time when [code]utc[/code] is "
-"false, otherwise they are in UTC."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given Unix timestamp to an ISO 8601 date string (YYYY-MM-DD)."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given ISO 8601 date and time string (YYYY-MM-DDTHH:MM:SS) to a "
-"dictionary of keys: [code]year[/code], [code]month[/code], [code]day[/code], "
-"[code]weekday[/code], [code]hour[/code], [code]minute[/code], and "
-"[code]second[/code].\n"
-"If [code]weekday[/code] is false, then the [code]weekday[/code] entry is "
-"excluded (the calculation is relatively expensive).\n"
-"[b]Note:[/b] Any decimal fraction in the time string will be ignored "
-"silently."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current date as a dictionary of keys: [code]year[/code], "
-"[code]month[/code], [code]day[/code], [code]weekday[/code], [code]hour[/"
-"code], [code]minute[/code], and [code]second[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given Unix timestamp to a dictionary of keys: [code]year[/"
-"code], [code]month[/code], [code]day[/code], and [code]weekday[/code].\n"
-"The returned Dictionary's values will be the same as the [method "
-"get_datetime_dict_from_system] if the Unix timestamp is the current time, "
-"with the exception of Daylight Savings Time as it cannot be determined from "
-"the epoch."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given dictionary of keys to an ISO 8601 date and time string "
-"(YYYY-MM-DDTHH:MM:SS).\n"
-"The given dictionary can be populated with the following keys: [code]year[/"
-"code], [code]month[/code], [code]day[/code], [code]hour[/code], "
-"[code]minute[/code], and [code]second[/code]. Any other entries (including "
-"[code]dst[/code]) are ignored.\n"
-"If the dictionary is empty, [code]0[/code] is returned. If some keys are "
-"omitted, they default to the equivalent values for the Unix epoch timestamp "
-"0 (1970-01-01 at 00:00:00).\n"
-"If [code]use_space[/code] is true, use a space instead of the letter T in "
-"the middle."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current date and time as an ISO 8601 date and time string (YYYY-"
-"MM-DDTHH:MM:SS).\n"
-"The returned values are in the system's local time when [code]utc[/code] is "
-"false, otherwise they are in UTC.\n"
-"If [code]use_space[/code] is true, use a space instead of the letter T in "
-"the middle."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given Unix timestamp to an ISO 8601 date and time string (YYYY-"
-"MM-DDTHH:MM:SS).\n"
-"If [code]use_space[/code] is true, use a space instead of the letter T in "
-"the middle."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given timezone offset in minutes to a timezone offset string. "
-"For example, -480 returns \"-08:00\", 345 returns \"+05:45\", and 0 returns "
-"\"+00:00\"."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the amount of time passed in milliseconds since the engine started.\n"
-"Will always be positive or 0 and uses a 64-bit value (it will wrap after "
-"roughly 500 million years)."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the amount of time passed in microseconds since the engine started.\n"
-"Will always be positive or 0 and uses a 64-bit value (it will wrap after "
-"roughly half a million years)."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current time as a dictionary of keys: [code]hour[/code], "
-"[code]minute[/code], and [code]second[/code].\n"
-"The returned values are in the system's local time when [code]utc[/code] is "
-"false, otherwise they are in UTC."
-msgstr ""
-
-#: doc/classes/Time.xml
-#, fuzzy
-msgid ""
-"Converts the given time to a dictionary of keys: [code]hour[/code], "
-"[code]minute[/code], and [code]second[/code]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der [AABB] das Liniensegment zwischen "
-"[code]from[/code] und [code]to[/code] schneidet."
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current time as an ISO 8601 time string (HH:MM:SS).\n"
-"The returned values are in the system's local time when [code]utc[/code] is "
-"false, otherwise they are in UTC."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given Unix timestamp to an ISO 8601 time string (HH:MM:SS)."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current time zone as a dictionary of keys: [code]bias[/code] and "
-"[code]name[/code]. The [code]bias[/code] value is the offset from UTC in "
-"minutes, since not all time zones are multiples of an hour from UTC."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts a dictionary of time values to a Unix timestamp.\n"
-"The given dictionary can be populated with the following keys: [code]year[/"
-"code], [code]month[/code], [code]day[/code], [code]hour[/code], "
-"[code]minute[/code], and [code]second[/code]. Any other entries (including "
-"[code]dst[/code]) are ignored.\n"
-"If the dictionary is empty, [code]0[/code] is returned. If some keys are "
-"omitted, they default to the equivalent values for the Unix epoch timestamp "
-"0 (1970-01-01 at 00:00:00).\n"
-"You can pass the output from [method get_datetime_dict_from_unix_time] "
-"directly into this function and get the same as what was put in.\n"
-"[b]Note:[/b] Unix timestamps are often in UTC. This method does not do any "
-"timezone conversion, so the timestamp will be in the same timezone as the "
-"given datetime dictionary."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Converts the given ISO 8601 date and/or time string to a Unix timestamp. The "
-"string can contain a date only, a time only, or both.\n"
-"[b]Note:[/b] Unix timestamps are often in UTC. This method does not do any "
-"timezone conversion, so the timestamp will be in the same timezone as the "
-"given datetime string.\n"
-"[b]Note:[/b] Any decimal fraction in the time string will be ignored "
-"silently."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"Returns the current Unix timestamp in seconds based on the system time in "
-"UTC. This method is implemented by the operating system and always returns "
-"the time in UTC.\n"
-"[b]Note:[/b] Unlike other methods that use integer timestamps, this method "
-"returns the timestamp as a [float] for sub-second precision."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of January, represented numerically as [code]01[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of February, represented numerically as [code]02[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of March, represented numerically as [code]03[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of April, represented numerically as [code]04[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of May, represented numerically as [code]05[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of June, represented numerically as [code]06[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of July, represented numerically as [code]07[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of August, represented numerically as [code]08[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of September, represented numerically as [code]09[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of October, represented numerically as [code]10[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of November, represented numerically as [code]11[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The month of December, represented numerically as [code]12[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The day of the week Sunday, represented numerically as [code]0[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The day of the week Monday, represented numerically as [code]1[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The day of the week Tuesday, represented numerically as [code]2[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"The day of the week Wednesday, represented numerically as [code]3[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"The day of the week Thursday, represented numerically as [code]4[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid "The day of the week Friday, represented numerically as [code]5[/code]."
-msgstr ""
-
-#: doc/classes/Time.xml
-msgid ""
-"The day of the week Saturday, represented numerically as [code]6[/code]."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid "A countdown timer."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"Counts down a specified interval and emits a signal on reaching 0. Can be "
-"set to repeat or \"one-shot\" mode.\n"
-"[b]Note:[/b] To create a one-shot timer without instantiating a node, use "
-"[method SceneTree.create_timer]."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid "Returns [code]true[/code] if the timer is stopped."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"Starts the timer. Sets [code]wait_time[/code] to [code]time_sec[/code] if "
-"[code]time_sec > 0[/code]. This also resets the remaining time to "
-"[code]wait_time[/code].\n"
-"[b]Note:[/b] This method will not resume a paused timer. See [member paused]."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid "Stops the timer."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"If [code]true[/code], the timer will automatically start when entering the "
-"scene tree.\n"
-"[b]Note:[/b] This property is automatically set to [code]false[/code] after "
-"the timer enters the scene tree and starts."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"If [code]true[/code], the timer will stop when reaching 0. If [code]false[/"
-"code], it will restart."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"If [code]true[/code], the timer is paused and will not process until it is "
-"unpaused again, even if [method start] is called."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid "Processing mode. See [enum TimerProcessMode]."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"The timer's remaining time in seconds. Returns 0 if the timer is inactive.\n"
-"[b]Note:[/b] You cannot set this value. To change the timer's remaining "
-"time, use [method start]."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"The wait time in seconds.\n"
-"[b]Note:[/b] Timers can only emit once per rendered frame at most (or once "
-"per physics frame if [member process_mode] is [constant "
-"TIMER_PROCESS_PHYSICS]). This means very low wait times (lower than 0.05 "
-"seconds) will behave in significantly different ways depending on the "
-"rendered framerate. For very low wait times, it is recommended to use a "
-"process loop in a script instead of using a Timer node."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid ""
-"Update the timer during the physics step at each frame (fixed framerate "
-"processing)."
-msgstr ""
-
-#: doc/classes/Timer.xml
-msgid "Update the timer during the idle time at each frame."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "Flat button helper class."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid ""
-"This is a helper class to generate a flat [Button] (see [member Button."
-"flat]), creating a [ToolButton] is equivalent to:\n"
-"[codeblock]\n"
-"var btn = Button.new()\n"
-"btn.flat = true\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "Default text [Color] of the [ToolButton]."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "Text [Color] used when the [ToolButton] is disabled."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid ""
-"Text [Color] used when the [ToolButton] is focused. Only replaces the normal "
-"text color of the button. Disabled, hovered, and pressed states take "
-"precedence over this color."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "Text [Color] used when the [ToolButton] is being hovered."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "Text [Color] used when the [ToolButton] is being pressed."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "The horizontal space between [ToolButton]'s icon and text."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "[Font] of the [ToolButton]'s text."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "[StyleBox] used when the [ToolButton] is disabled."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid ""
-"[StyleBox] used when the [ToolButton] is focused. It is displayed over the "
-"current [StyleBox], so using [StyleBoxEmpty] will just disable the focus "
-"visual effect."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "[StyleBox] used when the [ToolButton] is being hovered."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "Default [StyleBox] for the [ToolButton]."
-msgstr ""
-
-#: doc/classes/ToolButton.xml
-msgid "[StyleBox] used when the [ToolButton] is being pressed."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "Button for touch screen devices for gameplay use."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid ""
-"TouchScreenButton allows you to create on-screen buttons for touch devices. "
-"It's intended for gameplay use, such as a unit you have to touch to move. "
-"Unlike [Button], TouchScreenButton supports multitouch out of the box. "
-"Several TouchScreenButtons can be pressed at the same time with touch "
-"input.\n"
-"This node inherits from [Node2D]. Unlike with [Control] nodes, you cannot "
-"set anchors on it. If you want to create menus or user interfaces, you may "
-"want to use [Button] nodes instead. To make button nodes react to touch "
-"events, you can enable the Emulate Mouse option in the Project Settings.\n"
-"You can configure TouchScreenButton to be visible only on touch devices, "
-"helping you develop your game both for desktop and mobile devices."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "Returns [code]true[/code] if this button is currently pressed."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "The button's action. Actions can be handled with [InputEventAction]."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "The button's bitmask."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "The button's texture for the normal state."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid ""
-"If [code]true[/code], the [signal pressed] and [signal released] signals are "
-"emitted whenever a pressed finger goes in and out of the button, even if the "
-"pressure started outside the active area of the button.\n"
-"[b]Note:[/b] This is a \"pass-by\" (not \"bypass\") press mode."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "The button's texture for the pressed state."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "The button's shape."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid ""
-"If [code]true[/code], the button's shape is centered in the provided "
-"texture. If no texture is used, this property has no effect."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "If [code]true[/code], the button's shape is visible."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid ""
-"The button's visibility mode. See [enum VisibilityMode] for possible values."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "Emitted when the button is pressed (down)."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "Emitted when the button is released (up)."
-msgstr ""
-
-#: doc/classes/TouchScreenButton.xml
-msgid "Always visible."
-msgstr "Immer sichtbar."
-
-#: doc/classes/TouchScreenButton.xml
-msgid "Visible on touch screens only."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid "3D transformation (3×4 matrix)."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"3×4 matrix (3 rows, 4 columns) used for 3D linear transformations. It can "
-"represent transformations such as translation, rotation, or scaling. It "
-"consists of a [member basis] (first 3 columns) and a [Vector3] for the "
-"[member origin] (last column).\n"
-"For more information, read the \"Matrices and transforms\" documentation "
-"article."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"Constructs a Transform from four [Vector3] values (matrix columns). Each "
-"axis corresponds to local basis vectors (some of which may be scaled)."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid "Constructs a Transform from a [Basis] and [Vector3]."
-msgstr "Konstruiert eine Transformation aus einer [Basis] und [Vector3]."
-
-#: doc/classes/Transform.xml
-msgid "Constructs a Transform from a [Transform2D]."
-msgstr "Konstruiert einen Transform aus einem [Transform2D]."
-
-#: doc/classes/Transform.xml
-msgid ""
-"Constructs a Transform from a [Quat]. The origin will be [code]Vector3(0, 0, "
-"0)[/code]."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"Constructs the Transform from a [Basis]. The origin will be Vector3(0, 0, 0)."
-msgstr ""
-
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid ""
-"Returns the inverse of the transform, under the assumption that the "
-"transformation is composed of rotation, scaling and translation."
-msgstr ""
-
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid ""
-"Returns a transform interpolated between this transform and another by a "
-"given [code]weight[/code] (on the range of 0.0 to 1.0)."
-msgstr ""
-
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid ""
-"Returns the inverse of the transform, under the assumption that the "
-"transformation is composed of rotation and translation (no scaling, use "
-"[method affine_inverse] for transforms with scaling)."
-msgstr ""
-
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid ""
-"Returns [code]true[/code] if this transform and [code]transform[/code] are "
-"approximately equal, by calling [code]is_equal_approx[/code] on each "
-"component."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"Returns a copy of the transform rotated such that its -Z axis points towards "
-"the [code]target[/code] position.\n"
-"The transform will first be rotated around the given [code]up[/code] vector, "
-"and then fully aligned to the target by a further rotation around an axis "
-"perpendicular to both the [code]target[/code] and [code]up[/code] vectors.\n"
-"Operations take place in global space."
-msgstr ""
-
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid ""
-"Returns the transform with the basis orthogonal (90 degrees), and normalized "
-"axis vectors (scale of 1 or -1)."
-msgstr ""
-
-#: doc/classes/Transform.xml
-#, fuzzy
-msgid ""
-"Returns a copy of the transform rotated around the given [code]axis[/code] "
-"by the given [code]angle[/code] (in radians), using matrix multiplication. "
-"The [code]axis[/code] must be a normalized vector."
-msgstr ""
-"Dreht diesen Vektor um eine gegebene Achse um [code]phi[/code] Bogenmaß. Die "
-"Achse muss ein normierter Vektor sein."
-
-#: doc/classes/Transform.xml
-msgid ""
-"Returns a copy of the transform with its basis and origin scaled by the "
-"given [code]scale[/code] factor, using matrix multiplication."
-msgstr ""
-
-#: doc/classes/Transform.xml doc/classes/Transform2D.xml
-msgid ""
-"Returns a copy of the transform translated by the given [code]offset[/code], "
-"relative to the transform's basis vectors.\n"
-"Unlike [method rotated] and [method scaled], this does not use matrix "
-"multiplication."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"Transforms the given [Vector3], [Plane], [AABB], or [PoolVector3Array] by "
-"this transform."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"Inverse-transforms the given [Vector3], [Plane], [AABB], or "
-"[PoolVector3Array] by this transform, under the assumption that the "
-"transformation is composed of rotation and translation (no scaling). "
-"Equivalent to calling [code]inverse().xform(v)[/code] on this transform. For "
-"affine transformations (e.g. with scaling) see [method affine_inverse] "
-"method."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"The basis is a matrix containing 3 [Vector3] as its columns: X axis, Y axis, "
-"and Z axis. These vectors can be interpreted as the basis vectors of local "
-"coordinate system traveling with the object."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"The translation offset of the transform (column 3, the fourth column). "
-"Equivalent to array index [code]3[/code]."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid ""
-"[Transform] with no translation, rotation or scaling applied. When applied "
-"to other data structures, [constant IDENTITY] performs no transformation."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid "[Transform] with mirroring applied perpendicular to the YZ plane."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid "[Transform] with mirroring applied perpendicular to the XZ plane."
-msgstr ""
-
-#: doc/classes/Transform.xml
-msgid "[Transform] with mirroring applied perpendicular to the XY plane."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "2D transformation (2×3 matrix)."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"2×3 matrix (2 rows, 3 columns) used for 2D linear transformations. It can "
-"represent transformations such as translation, rotation, or scaling. It "
-"consists of three [Vector2] values: [member x], [member y], and the [member "
-"origin].\n"
-"For more information, read the \"Matrices and transforms\" documentation "
-"article."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "Constructs the transform from a 3D [Transform]."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Constructs the transform from 3 [Vector2] values representing [member x], "
-"[member y], and the [member origin] (the three column vectors)."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "Constructs the transform from a given angle (in radians) and position."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Returns a vector transformed (multiplied) by the basis matrix.\n"
-"This method does not account for translation (the origin vector)."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Returns a vector transformed (multiplied) by the inverse basis matrix.\n"
-"This method does not account for translation (the origin vector)."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "Returns the transform's origin (translation)."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "Returns the transform's rotation (in radians)."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "Returns the scale."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Returns a copy of the transform rotated by the given [code]angle[/code] (in "
-"radians), using matrix multiplication."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Returns a copy of the transform scaled by the given [code]scale[/code] "
-"factor, using matrix multiplication.\n"
-"[b]Note:[/b] Negative X scales in 2D are not decomposable from the "
-"transformation matrix. Due to the way scale is represented with "
-"transformation matrices in Godot, negative scales on the X axis will be "
-"changed to negative scales on the Y axis and a rotation of 180 degrees when "
-"decomposed."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Transforms the given [Vector2], [Rect2], or [PoolVector2Array] by this "
-"transform."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"Inverse-transforms the given [Vector2], [Rect2], or [PoolVector2Array] by "
-"this transform, under the assumption that the transformation is composed of "
-"rotation and translation (no scaling). Equivalent to calling [code]inverse()."
-"xform(v)[/code] on this transform. For affine transformations (e.g. with "
-"scaling) see [method affine_inverse] method."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"The origin vector (column 2, the third column). Equivalent to array index "
-"[code]2[/code]. The origin vector represents translation."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid ""
-"The identity [Transform2D] with no translation, rotation or scaling applied. "
-"When applied to other data structures, [constant IDENTITY] performs no "
-"transformation."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "The [Transform2D] that will flip something along the X axis."
-msgstr ""
-
-#: doc/classes/Transform2D.xml
-msgid "The [Transform2D] that will flip something along the Y axis."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Language Translation."
-msgstr "Sprachübersetzung."
-
-#: doc/classes/Translation.xml
-msgid ""
-"Translations are resources that can be loaded and unloaded on demand. They "
-"map a string to another string."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Virtual method to override [method get_message]."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Adds a message if nonexistent, followed by its translation."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Erases a message."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Returns a message's translation."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Returns the number of existing messages."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "Returns all the messages (keys)."
-msgstr ""
-
-#: doc/classes/Translation.xml
-msgid "The locale of the translation."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid "Server that manages all translations."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid ""
-"Server that manages all translations. Translations can be set to it and "
-"removed from it."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid "Adds a [Translation] resource."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid "Clears the server from all translations."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-#, fuzzy
-msgid "Returns an array of all loaded locales of the project."
-msgstr ""
-"Gibt ein Array aller Zellen mit der angegebenen Kachel [code]index[/code] "
-"zurück."
-
-#: doc/classes/TranslationServer.xml
-msgid ""
-"Returns the current locale of the project.\n"
-"See also [method OS.get_locale] and [method OS.get_locale_language] to query "
-"the locale of the user system."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid ""
-"Returns a locale's language and its variant (e.g. [code]\"en_US\"[/code] "
-"would return [code]\"English (United States)\"[/code])."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid "Removes the given translation from the server."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid ""
-"Sets the locale of the project. The [code]locale[/code] string will be "
-"standardized to match known locales (e.g. [code]en-US[/code] would be "
-"matched to [code]en_US[/code]).\n"
-"If translations have been loaded beforehand for the new locale, they will be "
-"applied."
-msgstr ""
-
-#: doc/classes/TranslationServer.xml
-msgid "Returns the current locale's translation for the given message (key)."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Control to show a tree of items."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"This shows a tree of items that can be selected, expanded and collapsed. The "
-"tree can have multiple columns with custom controls like text editing, "
-"buttons and popups. It can be useful for structured displays and "
-"interactions.\n"
-"Trees are built via code, using [TreeItem] objects to create the structure. "
-"They have a single root but multiple roots can be simulated if a dummy "
-"hidden root is added.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    var tree = Tree.new()\n"
-"    var root = tree.create_item()\n"
-"    tree.set_hide_root(true)\n"
-"    var child1 = tree.create_item(root)\n"
-"    var child2 = tree.create_item(root)\n"
-"    var subchild1 = tree.create_item(child1)\n"
-"    subchild1.set_text(0, \"Subchild1\")\n"
-"[/codeblock]\n"
-"To iterate over all the [TreeItem] objects in a [Tree] object, use [method "
-"TreeItem.get_next] and [method TreeItem.get_children] after getting the root "
-"through [method get_root]. You can use [method Object.free] on a [TreeItem] "
-"to remove it from the [Tree].\n"
-"[b]Incremental search:[/b] Like [ItemList] and [PopupMenu], [Tree] supports "
-"searching within the list while the control is focused. Press a key that "
-"matches the first letter of an item's name to select the first item starting "
-"with the given letter. After that point, there are two ways to perform "
-"incremental search: 1) Press the same key again before the timeout duration "
-"to select the next item starting with the same letter. 2) Press letter keys "
-"that match the rest of the word before the timeout duration to match to "
-"select the item in question directly. Both of these actions will be reset to "
-"the beginning of the list if the timeout duration has passed since the last "
-"keystroke was registered. You can adjust the timeout duration by changing "
-"[member ProjectSettings.gui/timers/incremental_search_max_interval_msec]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Clears the tree. This removes all items."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Creates an item in the tree and adds it as a child of [code]parent[/code], "
-"which can be either a valid [TreeItem] or [code]null[/code].\n"
-"If [code]parent[/code] is [code]null[/code], the root item will be the "
-"parent, or the new item will be the root itself if the tree is empty.\n"
-"The new item will be the [code]idx[/code]th child of parent, or it will be "
-"the last child if there are not enough siblings."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Edits the selected tree item as if it was clicked. The item must be set "
-"editable with [method TreeItem.set_editable]. Returns [code]true[/code] if "
-"the item could be edited. Fails if no item is selected."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Makes the currently focused cell visible.\n"
-"This will scroll the tree if necessary. In [constant SELECT_ROW] mode, this "
-"will not do horizontal scrolling, as all the cells in the selected row is "
-"focused logically.\n"
-"[b]Note:[/b] Despite the name of this method, the focus cursor itself is "
-"only visible in [constant SELECT_MULTI] mode."
-msgstr ""
-
-#: doc/classes/Tree.xml
-#, fuzzy
-msgid ""
-"Returns the button id at [code]position[/code], or -1 if no button is there."
-msgstr ""
-"Gibt den Namen von [code]animation[/code] zurück oder eine leere "
-"Zeichenkette, wenn nicht gefunden."
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the column index at [code]position[/code], or -1 if no item is there."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Returns the column's title."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Returns the column's width in pixels."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the rectangle for custom popups. Helper to create custom cell "
-"controls that display a popup. See [method TreeItem.set_cell_mode]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the drop section at [code]position[/code], or -100 if no item is "
-"there.\n"
-"Values -1, 0, or 1 will be returned for the \"above item\", \"on item\", and "
-"\"below item\" drop sections, respectively. See [enum DropModeFlags] for a "
-"description of each drop section.\n"
-"To get the item which the returned drop section is relative to, use [method "
-"get_item_at_position]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the currently edited item. Can be used with [signal item_edited] to "
-"get the item that was modified.\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    $Tree.connect(\"item_edited\", self, \"on_Tree_item_edited\")\n"
-"\n"
-"func on_Tree_item_edited():\n"
-"    print($Tree.get_edited()) # This item just got edited (e.g. checked).\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Tree.xml
-#, fuzzy
-msgid "Returns the column for the currently edited item."
-msgstr "Gibt den Kosinus des Parameters zurück."
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the rectangle area for the specified [TreeItem]. If [code]column[/"
-"code] is specified, only get the position and size of that column, otherwise "
-"get the rectangle containing all columns."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the tree item at the specified position (relative to the tree origin "
-"position)."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the next selected [TreeItem] after the given one, or [code]null[/"
-"code] if the end is reached.\n"
-"If [code]from[/code] is [code]null[/code], this returns the first selected "
-"item."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Returns the last pressed button's index."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the tree's root item, or [code]null[/code] if the tree is empty."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Returns the current scrolling position."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the currently focused item, or [code]null[/code] if no item is "
-"focused.\n"
-"In [constant SELECT_ROW] and [constant SELECT_SINGLE] modes, the focused "
-"item is same as the selected item. In [constant SELECT_MULTI] mode, the "
-"focused item is the item under the focus cursor, not necessarily selected.\n"
-"To get the currently selected item(s), use [method get_next_selected]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Returns the currently focused column, or -1 if no column is focused.\n"
-"In [constant SELECT_SINGLE] mode, the focused column is the selected column. "
-"In [constant SELECT_ROW] mode, the focused column is always 0 if any item is "
-"selected. In [constant SELECT_MULTI] mode, the focused column is the column "
-"under the focus cursor, and there are not necessarily any column selected.\n"
-"To tell whether a column of an item is selected, use [method TreeItem."
-"is_selected]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-#, fuzzy
-msgid "Causes the [Tree] to jump to the specified [TreeItem]."
-msgstr "Trennt das Node, der mit dem angegebenen Eingang verbunden ist."
-
-#: doc/classes/Tree.xml
-msgid ""
-"If [code]true[/code], the column will have the \"Expand\" flag of [Control]. "
-"Columns that have the \"Expand\" flag will use their \"min_width\" in a "
-"similar fashion to [member Control.size_flags_stretch_ratio]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Sets the minimum width of a column. Columns that have the \"Expand\" flag "
-"will use their \"min_width\" in a similar fashion to [member Control."
-"size_flags_stretch_ratio]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Sets the title of a column."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"If [code]true[/code], the currently selected cell may be selected again."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "If [code]true[/code], a right mouse button click can select items."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "If [code]true[/code], column titles are visible."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "The number of columns."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The drop mode as an OR combination of flags. See [enum DropModeFlags] "
-"constants. Once dropping is done, reverts to [constant DROP_MODE_DISABLED]. "
-"Setting this during [method Control.can_drop_data] is recommended.\n"
-"This controls the drop sections, i.e. the decision and drawing of possible "
-"drop locations based on the mouse position."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "If [code]true[/code], the folding arrow is hidden."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "If [code]true[/code], the tree's root is hidden."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Allows single or multiple selection. See the [enum SelectMode] constants."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Emitted when a button on the tree was pressed (see [method TreeItem."
-"add_button])."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when a cell is selected."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when a column's title is pressed."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Emitted when a cell with the [constant TreeItem.CELL_MODE_CUSTOM] is clicked "
-"to be edited."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Emitted when the right mouse button is pressed in the empty space of the "
-"tree."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Emitted when the right mouse button is pressed if right mouse button "
-"selection is active and the tree is empty."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item's label is double-clicked."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item is collapsed by a click on the folding arrow."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Emitted when a custom button is pressed (i.e. in a [constant TreeItem."
-"CELL_MODE_CUSTOM] mode cell)."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item's icon is double-clicked."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item is edited."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item is edited using the right mouse button."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item is selected with the right mouse button."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when an item is selected."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Emitted instead of [code]item_selected[/code] if [code]select_mode[/code] is "
-"[constant SELECT_MULTI]."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Emitted when a left mouse button click does not select any item."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Allows selection of a single cell at a time. From the perspective of items, "
-"only a single item is allowed to be selected. And there is only one column "
-"selected in the selected item.\n"
-"The focus cursor is always hidden in this mode, but it is positioned at the "
-"current selection, making the currently selected item the currently focused "
-"item."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Allows selection of a single row at a time. From the perspective of items, "
-"only a single items is allowed to be selected. And all the columns are "
-"selected in the selected item.\n"
-"The focus cursor is always hidden in this mode, but it is positioned at the "
-"first column of the current selection, making the currently selected item "
-"the currently focused item."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Allows selection of multiple cells at the same time. From the perspective of "
-"items, multiple items are allowed to be selected. And there can be multiple "
-"columns selected in each selected item.\n"
-"The focus cursor is visible in this mode, the item or column under the "
-"cursor is not necessarily selected."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Disables all drop sections, but still allows to detect the \"on item\" drop "
-"section by [method get_drop_section_at_position].\n"
-"[b]Note:[/b] This is the default flag, it has no effect when combined with "
-"other flags."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Enables the \"on item\" drop section. This drop section covers the entire "
-"item.\n"
-"When combined with [constant DROP_MODE_INBETWEEN], this drop section halves "
-"the height and stays centered vertically."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Enables \"above item\" and \"below item\" drop sections. The \"above item\" "
-"drop section covers the top half of the item, and the \"below item\" drop "
-"section covers the bottom half.\n"
-"When combined with [constant DROP_MODE_ON_ITEM], these drop sections halves "
-"the height and stays on top / bottom accordingly."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Text [Color] for a [constant TreeItem.CELL_MODE_CUSTOM] mode cell when it's "
-"hovered."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"[Color] used to draw possible drop locations. See [enum DropModeFlags] "
-"constants for further description of drop locations."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[Color] of the guideline."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[Color] of the relationship lines."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Default text [Color] of the title button."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "The horizontal space between each button in a cell."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Draws the guidelines if not zero, this acts as a boolean. The guideline is a "
-"horizontal line drawn at the bottom of each item."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Draws the relationship lines if not zero, this acts as a boolean. "
-"Relationship lines are drawn at the start of child items to show hierarchy."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The horizontal space between item cells. This is also used as the margin at "
-"the start of an item when folding is disabled."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The horizontal margin at the start of an item. This is used when folding is "
-"enabled for the item."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The maximum distance between the mouse cursor and the control's border to "
-"trigger border scrolling when dragging."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "The speed of border scrolling."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The vertical padding inside each item, i.e. the distance between the item's "
-"content and top/bottom border."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[Font] of the title button's text."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "The arrow icon used when a foldable item is not collapsed."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "The arrow icon used when a foldable item is collapsed."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The check icon to display when the [constant TreeItem.CELL_MODE_CHECK] mode "
-"cell is checked."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The arrow icon to display for the [constant TreeItem.CELL_MODE_RANGE] mode "
-"cell."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The check icon to display when the [constant TreeItem.CELL_MODE_CHECK] mode "
-"cell is unchecked."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"The updown arrow icon to display for the [constant TreeItem.CELL_MODE_RANGE] "
-"mode cell."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Default [StyleBox] for the [Tree], i.e. used when the control is not being "
-"focused."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[StyleBox] used when the [Tree] is being focused."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[StyleBox] used when a button in the tree is pressed."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[StyleBox] used for the cursor, when the [Tree] is being focused."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[StyleBox] used for the cursor, when the [Tree] is not being focused."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"Default [StyleBox] for a [constant TreeItem.CELL_MODE_CUSTOM] mode cell."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"[StyleBox] for a [constant TreeItem.CELL_MODE_CUSTOM] mode cell when it's "
-"hovered."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"[StyleBox] for a [constant TreeItem.CELL_MODE_CUSTOM] mode cell when it's "
-"pressed."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"[StyleBox] for the selected items, used when the [Tree] is not being focused."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid ""
-"[StyleBox] for the selected items, used when the [Tree] is being focused."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[StyleBox] used when the title button is being hovered."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "Default [StyleBox] for the title button."
-msgstr ""
-
-#: doc/classes/Tree.xml
-msgid "[StyleBox] used when the title button is being pressed."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Control for a single item inside a [Tree]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Control for a single item inside a [Tree]. May have child [TreeItem]s and be "
-"styled as well as contain buttons.\n"
-"You can remove a [TreeItem] by using [method Object.free]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Adds a button with [Texture] [code]button[/code] at column [code]column[/"
-"code]. The [code]id[/code] is used to identify the button. If not specified, "
-"the next available index is used, which may be retrieved by calling [method "
-"get_button_count] immediately before this method. Optionally, the button can "
-"be [code]disabled[/code] and have a [code]tooltip[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Calls the [code]method[/code] on the actual TreeItem and its children "
-"recursively. Pass parameters as a comma separated list."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Resets the background color for the given column to default."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Resets the color for the given column to default."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Deselects the given column."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Removes the button at index [code]button_idx[/code] in column [code]column[/"
-"code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid ""
-"Returns the [Texture] of the button at index [code]button_idx[/code] in "
-"column [code]column[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid ""
-"Returns the button index if there is a button with id [code]id[/code] in "
-"column [code]column[/code], otherwise returns -1."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid "Returns the number of buttons in column [code]column[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid ""
-"Returns the id for the button at index [code]button_idx[/code] in column "
-"[code]column[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the tooltip string for the button at index [code]button_idx[/code] "
-"in column [code]column[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the column's cell mode."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the TreeItem's first child item or a null object if there is none."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the custom background color of column [code]column[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the custom color of column [code]column[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns [code]true[/code] if [code]expand_right[/code] is set."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid "Returns the given column's icon [Texture]. Error if no icon is set."
-msgstr "Gibt die [Texture2D] des angegebenen Rahmens zurück."
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the column's icon's maximum width."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the [Color] modulating the column's icon."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid "Returns the icon [Texture] region as [Rect2]."
-msgstr "Liefert den Schnittpunkt von diesem [Rect2i] und b."
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the metadata value that was set for the given column using [method "
-"set_metadata]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the next sibling TreeItem in the tree or a null object if there is "
-"none."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the next visible sibling TreeItem in the tree or a null object if "
-"there is none.\n"
-"If [code]wrap[/code] is enabled, the method will wrap around to the first "
-"visible element in the tree when called on the last visible element, "
-"otherwise it returns [code]null[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the parent TreeItem or a null object if there is none."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the previous sibling TreeItem in the tree or a null object if there "
-"is none."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns the previous visible sibling TreeItem in the tree or a null object "
-"if there is none.\n"
-"If [code]wrap[/code] is enabled, the method will wrap around to the last "
-"visible element in the tree when called on the first visible element, "
-"otherwise it returns [code]null[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the value of a [constant CELL_MODE_RANGE] column."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns a dictionary containing the range parameters for a given column. The "
-"keys are \"min\", \"max\", \"step\", and \"expr\"."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Gets the suffix string shown after the column value."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the given column's text."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the given column's text alignment."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns the given column's tooltip."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Returns [code]true[/code] if the button at index [code]button_idx[/code] for "
-"the given column is disabled."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns [code]true[/code] if the given column is checked."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns [code]true[/code] if column [code]column[/code] is editable."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns [code]true[/code] if column [code]column[/code] is selectable."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Returns [code]true[/code] if column [code]column[/code] is selected."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Moves this TreeItem to the bottom in the [Tree] hierarchy."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Moves this TreeItem to the top in the [Tree] hierarchy."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Removes the given child [TreeItem] and all its children from the [Tree]. "
-"Note that it doesn't free the item from memory, so it can be reused later. "
-"To completely remove a [TreeItem] use [method Object.free]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Selects the column [code]column[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid ""
-"Sets the given column's button [Texture] at index [code]button_idx[/code] to "
-"[code]button[/code]."
-msgstr ""
-"Liefert die Position des Punktes bei Index [code]Punkt[/code] im Dreieck von "
-"Index [code]Dreieck[/code]."
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"If [code]true[/code], disables the button at index [code]button_idx[/code] "
-"in column [code]column[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets the given column's cell mode to [code]mode[/code]. See [enum "
-"TreeCellMode] constants."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "If [code]true[/code], the column [code]column[/code] is checked."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets the given column's custom background color and whether to just use it "
-"as an outline."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Sets the given column's custom color."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets the given column's custom draw callback to [code]callback[/code] method "
-"on [code]object[/code].\n"
-"The [code]callback[/code] should accept two arguments: the [TreeItem] that "
-"is drawn and its position and size as a [Rect2]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "If [code]true[/code], column [code]column[/code] is editable."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"If [code]true[/code], column [code]column[/code] is expanded to the right."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid "Sets the given column's icon [Texture]."
-msgstr "Gibt die [Texture2D] des angegebenen Rahmens zurück."
-
-#: doc/classes/TreeItem.xml
-msgid "Sets the given column's icon's maximum width."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Modulates the given column's icon with [code]modulate[/code]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Sets the given column's icon's texture region."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets the metadata value for the given column, which can be retrieved later "
-"using [method get_metadata]. This can be used, for example, to store a "
-"reference to the original data."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Sets the value of a [constant CELL_MODE_RANGE] column."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets the range of accepted values for a column. The column must be in the "
-"[constant CELL_MODE_RANGE] mode.\n"
-"If [code]expr[/code] is [code]true[/code], the edit mode slider will use an "
-"exponential scale as with [member Range.exp_edit]."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "If [code]true[/code], the given column is selectable."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets a string to be shown after a column's value (for example, a unit "
-"abbreviation)."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid "Sets the given column's text value."
-msgstr "Gibt den Verzögerungswert des angegebenen Frames zurück."
-
-#: doc/classes/TreeItem.xml
-msgid ""
-"Sets the given column's text alignment. See [enum TextAlign] for possible "
-"values."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Sets the given column's tooltip text."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "If [code]true[/code], the TreeItem is collapsed."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "The custom minimum height."
-msgstr "Die benutzerdefinierte kleinstmögliche Höhe."
-
-#: doc/classes/TreeItem.xml
-msgid "If [code]true[/code], folding is disabled for this TreeItem."
-msgstr ""
-"Wenn [code]true[/code], ist das einklappen für dieses TreeItem deaktiviert."
-
-#: doc/classes/TreeItem.xml
-msgid "Cell contains a string."
-msgstr "Zelle enthält eine Zeichenkette."
-
-#: doc/classes/TreeItem.xml
-#, fuzzy
-msgid "Cell contains a checkbox."
-msgstr "Zelle enthält ein Symbol."
-
-#: doc/classes/TreeItem.xml
-msgid "Cell contains a range."
-msgstr ""
-
-#: doc/classes/TreeItem.xml
-msgid "Cell contains an icon."
-msgstr "Zelle enthält ein Symbol."
-
-#: doc/classes/TreeItem.xml
-msgid "Align text to the left. See [code]set_text_align()[/code]."
-msgstr "Richtet Text links aus. Siehe [code]set_text_align()[/code]."
-
-#: doc/classes/TreeItem.xml
-msgid "Center text. See [code]set_text_align()[/code]."
-msgstr "Richtet Text zentriert aus. Siehe [code]set_text_align()[/code]."
-
-#: doc/classes/TreeItem.xml
-msgid "Align text to the right. See [code]set_text_align()[/code]."
-msgstr "Richtet Text rechts aus. Siehe [code]set_text_align()[/code]."
-
-#: doc/classes/TriangleMesh.xml
-msgid "Internal mesh type."
-msgstr "Interner Mesh Typ."
-
-#: doc/classes/TriangleMesh.xml
-msgid "Mesh type used internally for collision calculations."
-msgstr "Mesh Typ welcher intern für Kollisionsberechnungen benutzt wird."
-
-#: doc/classes/Tween.xml
-msgid "Smoothly animates a node's properties over time."
-msgstr ""
-"Animiert die Eigenschaften eines Knotens im Laufe der Zeit reibungslos."
-
-#: doc/classes/Tween.xml
-#, fuzzy
-msgid ""
-"Tweens are useful for animations requiring a numerical property to be "
-"interpolated over a range of values. The name [i]tween[/i] comes from [i]in-"
-"betweening[/i], an animation technique where you specify [i]keyframes[/i] "
-"and the computer interpolates the frames that appear between them.\n"
-"[Tween] is more suited than [AnimationPlayer] for animations where you don't "
-"know the final values in advance. For example, interpolating a dynamically-"
-"chosen camera zoom value is best done with a [Tween] node; it would be "
-"difficult to do the same thing with an [AnimationPlayer] node.\n"
-"Here is a brief usage example that makes a 2D node move smoothly between two "
-"positions:\n"
-"[codeblock]\n"
-"var tween = get_node(\"Tween\")\n"
-"tween.interpolate_property($Node2D, \"position\",\n"
-"        Vector2(0, 0), Vector2(100, 100), 1,\n"
-"        Tween.TRANS_LINEAR, Tween.EASE_IN_OUT)\n"
-"tween.start()\n"
-"[/codeblock]\n"
-"Many methods require a property name, such as [code]\"position\"[/code] "
-"above. You can find the correct property name by hovering over the property "
-"in the Inspector. You can also provide the components of a property directly "
-"by using [code]\"property:component\"[/code] (e.g. [code]position:x[/code]), "
-"where it would only apply to that particular component.\n"
-"Many of the methods accept [code]trans_type[/code] and [code]ease_type[/"
-"code]. The first accepts an [enum TransitionType] constant, and refers to "
-"the way the timing of the animation is handled (see [url=https://easings."
-"net/]easings.net[/url] for some examples). The second accepts an [enum "
-"EaseType] constant, and controls where the [code]trans_type[/code] is "
-"applied to the interpolation (in the beginning, the end, or both). If you "
-"don't know which transition and easing to pick, you can try different [enum "
-"TransitionType] constants with [constant EASE_IN_OUT], and use the one that "
-"looks best.\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"tween_cheatsheet.png]Tween easing and transition types cheatsheet[/url]\n"
-"[b]Note:[/b] Tween methods will return [code]false[/code] if the requested "
-"operation cannot be completed.\n"
-"[b]Note:[/b] For an alternative method of tweening, that doesn't require "
-"using nodes, see [SceneTreeTween]."
-msgstr ""
-"Tweens sind nützlich für Animationen, bei denen eine numerische Eigenschaft "
-"über einen Bereich von Werten interpoliert werden muss. Der Name [i]tween[/"
-"i] kommt von [i]in-betweening[/i], einer Animationstechnik, bei der Sie "
-"[i]Keyframes[/i] angeben und der Computer die Frames interpoliert, die "
-"dazwischen erscheinen.\n"
-"[Tween] eignet sich besser als [AnimationPlayer] für Animationen, bei denen "
-"Sie die Endwerte nicht im Voraus kennen. Das Interpolieren eines dynamisch "
-"gewählten Kamerazoomwerts lässt sich z. B. am besten mit einem [Tween]-"
-"Knoten durchführen; mit einem [AnimationPlayer]-Knoten wäre es schwierig, "
-"dasselbe zu tun.\n"
-"Hier ist ein kurzes Anwendungsbeispiel, das einen 2D-Knoten dazu bringt, "
-"sich fließend zwischen zwei Positionen zu bewegen:\n"
-"[codeblock]\n"
-"var tween = get_node(\"Tween\")\n"
-"tween.interpolate_property($Node2D, \"position\",\n"
-"        Vector2(0, 0), Vector2(100, 100), 1,\n"
-"        Tween.TRANS_LINEAR, Tween.EASE_IN_OUT)\n"
-"tween.start()\n"
-"[/codeblock]\n"
-"Viele Methoden erfordern einen Eigenschaftsnamen, wie z. B. "
-"[code]\"position\"[/code] oben. Sie können den richtigen Eigenschaftsnamen "
-"finden, indem Sie den Mauszeiger über die Eigenschaft im Inspektor bewegen. "
-"Sie können auch die Komponenten einer Eigenschaft direkt angeben, indem Sie "
-"[code]\"property:component\"[/code] verwenden (z. B. [code]position:x[/"
-"code]), wobei die Eigenschaft nur für diese bestimmte Komponente gelten "
-"würde.\n"
-"Viele der Methoden akzeptieren [code]trans_type[/code] und [code]ease_type[/"
-"code]. Die erste akzeptiert eine [enum TransitionType]-Konstante und bezieht "
-"sich auf die Art und Weise, wie das Timing der Animation behandelt wird "
-"(siehe [url=https://easings.net/]easings.net[/url] für einige Beispiele). "
-"Die zweite akzeptiert eine [enum EaseType]-Konstante und steuert, wo der "
-"[code]trans_type[/code] auf die Interpolation angewendet wird (am Anfang, am "
-"Ende oder beides). Wenn Sie nicht wissen, welchen Übergang und welches "
-"Easing Sie wählen sollen, können Sie verschiedene [enum TransitionType]-"
-"Konstanten mit der [constant EASE_IN_OUT] ausprobieren und diejenige "
-"verwenden, die am besten aussieht.\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"tween_cheatsheet.png]Tween-Easing und Übergangstypen Cheatsheet[/url]"
-
-#: doc/classes/Tween.xml
-msgid ""
-"Follows [code]method[/code] of [code]object[/code] and applies the returned "
-"value on [code]target_method[/code] of [code]target[/code], beginning from "
-"[code]initial_val[/code] for [code]duration[/code] seconds, [code]delay[/"
-"code] later. Methods are called with consecutive values.\n"
-"Use [enum TransitionType] for [code]trans_type[/code] and [enum EaseType] "
-"for [code]ease_type[/code] parameters. These values control the timing and "
-"direction of the interpolation. See the class description for more "
-"information."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Follows [code]property[/code] of [code]object[/code] and applies it on "
-"[code]target_property[/code] of [code]target[/code], beginning from "
-"[code]initial_val[/code] for [code]duration[/code] seconds, [code]delay[/"
-"code] seconds later.\n"
-"Use [enum TransitionType] for [code]trans_type[/code] and [enum EaseType] "
-"for [code]ease_type[/code] parameters. These values control the timing and "
-"direction of the interpolation. See the class description for more "
-"information."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Returns the total time needed for all tweens to end. If you have two tweens, "
-"one lasting 10 seconds and the other 20 seconds, it would return 20 seconds, "
-"as by that time all tweens would have finished."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Calls [code]callback[/code] of [code]object[/code] after [code]duration[/"
-"code]. [code]arg1[/code]-[code]arg5[/code] are arguments to be passed to the "
-"callback."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Calls [code]callback[/code] of [code]object[/code] after [code]duration[/"
-"code] on the main thread (similar to [method Object.call_deferred]). "
-"[code]arg1[/code]-[code]arg5[/code] are arguments to be passed to the "
-"callback."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Animates [code]method[/code] of [code]object[/code] from [code]initial_val[/"
-"code] to [code]final_val[/code] for [code]duration[/code] seconds, "
-"[code]delay[/code] seconds later. Methods are called with consecutive "
-"values.\n"
-"Use [enum TransitionType] for [code]trans_type[/code] and [enum EaseType] "
-"for [code]ease_type[/code] parameters. These values control the timing and "
-"direction of the interpolation. See the class description for more "
-"information."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Animates [code]property[/code] of [code]object[/code] from "
-"[code]initial_val[/code] to [code]final_val[/code] for [code]duration[/code] "
-"seconds, [code]delay[/code] seconds later. Setting the initial value to "
-"[code]null[/code] uses the current value of the property.\n"
-"Use [enum TransitionType] for [code]trans_type[/code] and [enum EaseType] "
-"for [code]ease_type[/code] parameters. These values control the timing and "
-"direction of the interpolation. See the class description for more "
-"information."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Returns [code]true[/code] if any tweens are currently running.\n"
-"[b]Note:[/b] This method doesn't consider tweens that have ended."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Stops animation and removes a tween, given its object and property/method "
-"pair. By default, all tweens are removed, unless [code]key[/code] is "
-"specified."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Stops animation and removes all tweens."
-msgstr "Beendet die Animation und entfernt alle Tweens."
-
-#: doc/classes/Tween.xml
-msgid ""
-"Resets a tween to its initial value (the one given, not the one before the "
-"tween), given its object and property/method pair. By default, all tweens "
-"are reset, unless [code]key[/code] is specified."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Resets all tweens to their initial values (the ones given, not those before "
-"the tween)."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Continues animating a stopped tween, given its object and property/method "
-"pair. By default, all tweens are resumed, unless [code]key[/code] is "
-"specified."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Continues animating all stopped tweens."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Sets the interpolation to the given [code]time[/code] in seconds."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Activates/deactivates the tween. See also [method stop_all] and [method "
-"resume_all]."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Starts the tween. You can define animations both before and after this."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Stops a tween, given its object and property/method pair. By default, all "
-"tweens are stopped, unless [code]key[/code] is specified."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Stops animating all tweens."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Animates [code]method[/code] of [code]object[/code] from the value returned "
-"by [code]initial_method[/code] to [code]final_val[/code] for [code]duration[/"
-"code] seconds, [code]delay[/code] seconds later. Methods are animated by "
-"calling them with consecutive values.\n"
-"Use [enum TransitionType] for [code]trans_type[/code] and [enum EaseType] "
-"for [code]ease_type[/code] parameters. These values control the timing and "
-"direction of the interpolation. See the class description for more "
-"information."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"Animates [code]property[/code] of [code]object[/code] from the current value "
-"of the [code]initial_val[/code] property of [code]initial[/code] to "
-"[code]final_val[/code] for [code]duration[/code] seconds, [code]delay[/code] "
-"seconds later.\n"
-"Use [enum TransitionType] for [code]trans_type[/code] and [enum EaseType] "
-"for [code]ease_type[/code] parameters. These values control the timing and "
-"direction of the interpolation. See the class description for more "
-"information."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Returns the current time of the tween."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The tween's animation process thread. See [enum TweenProcessMode]."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The tween's speed multiplier. For example, set it to [code]1.0[/code] for "
-"normal speed, [code]2.0[/code] for two times normal speed, or [code]0.5[/"
-"code] for half of the normal speed. A value of [code]0[/code] pauses the "
-"animation, but see also [method set_active] or [method stop_all] for this."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "If [code]true[/code], the tween loops."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Emitted when all processes in a tween end."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Emitted when a tween ends."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Emitted when a tween starts."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "Emitted at each step of the animation."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The tween updates with the [code]_physics_process[/code] callback."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The tween updates with the [code]_process[/code] callback."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The animation is interpolated linearly."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The animation is interpolated using a sine function."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The animation is interpolated with a quintic (to the power of 5) function."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The animation is interpolated with a quartic (to the power of 4) function."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The animation is interpolated with a quadratic (to the power of 2) function."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The animation is interpolated with an exponential (to the power of x) "
-"function."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The animation is interpolated with elasticity, wiggling around the edges."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"The animation is interpolated with a cubic (to the power of 3) function."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The animation is interpolated with a function using square roots."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The animation is interpolated by bouncing at the end."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The animation is interpolated backing out at ends."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The interpolation starts slowly and speeds up towards the end."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid "The interpolation starts quickly and slows down towards the end."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"A combination of [constant EASE_IN] and [constant EASE_OUT]. The "
-"interpolation is slowest at both ends."
-msgstr ""
-
-#: doc/classes/Tween.xml
-msgid ""
-"A combination of [constant EASE_IN] and [constant EASE_OUT]. The "
-"interpolation is fastest at both ends."
-msgstr ""
-
-#: doc/classes/Tweener.xml
-msgid "Abstract class for all Tweeners used by [SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/Tweener.xml
-msgid ""
-"Tweeners are objects that perform a specific animating task, e.g. "
-"interpolating a property or calling a method at a given time. A [Tweener] "
-"can't be created manually, you need to use a dedicated method from "
-"[SceneTreeTween]."
-msgstr ""
-
-#: doc/classes/Tweener.xml
-msgid "Emitted when the [Tweener] has just finished its job."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid "Helper class to implement a UDP server."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"A simple server that opens a UDP socket and returns connected "
-"[PacketPeerUDP] upon receiving new packets. See also [method PacketPeerUDP."
-"connect_to_host].\n"
-"After starting the server ([method listen]), you will need to [method poll] "
-"it at regular intervals (e.g. inside [method Node._process]) for it to "
-"process new packets, delivering them to the appropriate [PacketPeerUDP], and "
-"taking new connections.\n"
-"Below a small example of how it can be used:\n"
-"[codeblock]\n"
-"# server.gd\n"
-"extends Node\n"
-"\n"
-"var server := UDPServer.new()\n"
-"var peers = []\n"
-"\n"
-"func _ready():\n"
-"    server.listen(4242)\n"
-"\n"
-"func _process(delta):\n"
-"    server.poll() # Important!\n"
-"    if server.is_connection_available():\n"
-"        var peer : PacketPeerUDP = server.take_connection()\n"
-"        var pkt = peer.get_packet()\n"
-"        print(\"Accepted peer: %s:%s\" % [peer.get_packet_ip(), peer."
-"get_packet_port()])\n"
-"        print(\"Received data: %s\" % [pkt.get_string_from_utf8()])\n"
-"        # Reply so it knows we received the message.\n"
-"        peer.put_packet(pkt)\n"
-"        # Keep a reference so we can keep contacting the remote peer.\n"
-"        peers.append(peer)\n"
-"\n"
-"    for i in range(0, peers.size()):\n"
-"        pass # Do something with the connected peers.\n"
-"\n"
-"[/codeblock]\n"
-"[codeblock]\n"
-"# client.gd\n"
-"extends Node\n"
-"\n"
-"var udp := PacketPeerUDP.new()\n"
-"var connected = false\n"
-"\n"
-"func _ready():\n"
-"    udp.connect_to_host(\"127.0.0.1\", 4242)\n"
-"\n"
-"func _process(delta):\n"
-"    if !connected:\n"
-"        # Try to contact server\n"
-"        udp.put_packet(\"The answer is... 42!\".to_utf8())\n"
-"    if udp.get_available_packet_count() > 0:\n"
-"        print(\"Connected: %s\" % udp.get_packet().get_string_from_utf8())\n"
-"        connected = true\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Returns [code]true[/code] if a packet with a new address/port combination "
-"was received on the socket."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Paket mit einer neuen Kombination "
-"aus Adresse und Port auf dem Socket empfangen wurde."
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Returns [code]true[/code] if the socket is open and listening on a port."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Starts the server by opening a UDP socket listening on the given port. You "
-"can optionally specify a [code]bind_address[/code] to only listen for "
-"packets sent to that address. See also [method PacketPeerUDP.listen]."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Call this method at regular intervals (e.g. inside [method Node._process]) "
-"to process new packets. And packet from known address/port pair will be "
-"delivered to the appropriate [PacketPeerUDP], any packet received from an "
-"unknown address/port pair will be added as a pending connection (see [method "
-"is_connection_available], [method take_connection]). The maximum number of "
-"pending connection is defined via [member max_pending_connections]."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Stops the server, closing the UDP socket if open. Will close all connected "
-"[PacketPeerUDP] accepted via [method take_connection] (remote peers will not "
-"be notified)."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Returns the first pending connection (connected to the appropriate address/"
-"port). Will return [code]null[/code] if no new connection is available. See "
-"also [method is_connection_available], [method PacketPeerUDP."
-"connect_to_host]."
-msgstr ""
-
-#: doc/classes/UDPServer.xml
-msgid ""
-"Define the maximum number of pending connections, during [method poll], any "
-"new pending connection exceeding that value will be automatically dropped. "
-"Setting this value to [code]0[/code] effectively prevents any new pending "
-"connection to be accepted (e.g. when all your players have connected)."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Helper to manage undo/redo operations in the editor or custom tools."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Helper to manage undo/redo operations in the editor or custom tools. It "
-"works by registering methods and property changes inside \"actions\".\n"
-"Common behavior is to create an action, then add do/undo calls to functions "
-"or property changes, then committing the action.\n"
-"Here's an example on how to add an action to the Godot editor's own "
-"[UndoRedo], from a plugin:\n"
-"[codeblock]\n"
-"var undo_redo = get_undo_redo() # Method of EditorPlugin.\n"
-"\n"
-"func do_something():\n"
-"    pass # Put your code here.\n"
-"\n"
-"func undo_something():\n"
-"    pass # Put here the code that reverts what's done by "
-"\"do_something()\".\n"
-"\n"
-"func _on_MyButton_pressed():\n"
-"    var node = get_node(\"MyNode2D\")\n"
-"    undo_redo.create_action(\"Move the node\")\n"
-"    undo_redo.add_do_method(self, \"do_something\")\n"
-"    undo_redo.add_undo_method(self, \"undo_something\")\n"
-"    undo_redo.add_do_property(node, \"position\", Vector2(100,100))\n"
-"    undo_redo.add_undo_property(node, \"position\", node.position)\n"
-"    undo_redo.commit_action()\n"
-"[/codeblock]\n"
-"[method create_action], [method add_do_method], [method add_undo_method], "
-"[method add_do_property], [method add_undo_property], and [method "
-"commit_action] should be called one after the other, like in the example. "
-"Not doing so could lead to crashes.\n"
-"If you don't need to register a method, you can leave [method add_do_method] "
-"and [method add_undo_method] out; the same goes for properties. You can also "
-"register more than one method/property."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Register a method that will be called when the action is committed."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Register a property value change for \"do\"."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Register a reference for \"do\" that will be erased if the \"do\" history is "
-"lost. This is useful mostly for new nodes created for the \"do\" call. Do "
-"not use for resources."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Register a method that will be called when the action is undone."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Register a property value change for \"undo\"."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Register a reference for \"undo\" that will be erased if the \"undo\" "
-"history is lost. This is useful mostly for nodes removed with the \"do\" "
-"call (not the \"undo\" call!)."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Clear the undo/redo history and associated references.\n"
-"Passing [code]false[/code] to [code]increase_version[/code] will prevent the "
-"version number to be increased from this."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Commit the action. All \"do\" methods/properties are called/set when this "
-"function is called."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Create a new action. After this is called, do all your calls to [method "
-"add_do_method], [method add_undo_method], [method add_do_property], and "
-"[method add_undo_property], then commit the action with [method "
-"commit_action].\n"
-"The way actions are merged is dictated by the [code]merge_mode[/code] "
-"argument. See [enum MergeMode] for details."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Gets the name of the current action."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Gets the version. Every time a new action is committed, the [UndoRedo]'s "
-"version number is increased automatically.\n"
-"This is useful mostly to check if something changed from a saved version."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Returns [code]true[/code] if the [UndoRedo] is currently committing the "
-"action, i.e. running its \"do\" method or property change (see [method "
-"commit_action])."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Redo the last action."
-msgstr "Die letzte Aktion wiederholen."
-
-#: doc/classes/UndoRedo.xml
-msgid "Undo the last action."
-msgstr "Die letzte Aktion rückgängig machen."
-
-#: doc/classes/UndoRedo.xml
-msgid "Called when [method undo] or [method redo] was called."
-msgstr ""
-"Wird aufgerufen, wenn [method undo] oder [method redo] aufgerufen wurde."
-
-#: doc/classes/UndoRedo.xml
-msgid "Makes \"do\"/\"undo\" operations stay in separate actions."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid ""
-"Makes so that the action's \"do\" operation is from the first action created "
-"and the \"undo\" operation is from the last subsequent action with the same "
-"name."
-msgstr ""
-
-#: doc/classes/UndoRedo.xml
-msgid "Makes subsequent actions with the same name be merged into one."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Universal Plug and Play (UPnP) functions for network device discovery, "
-"querying and port forwarding."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"This class can be used to discover compatible [UPNPDevice]s on the local "
-"network and execute commands on them, like managing port mappings (for port "
-"forwarding/NAT traversal) and querying the local and remote network IP "
-"address. Note that methods on this class are synchronous and block the "
-"calling thread.\n"
-"To forward a specific port (here [code]7777[/code], note both [method "
-"discover] and [method add_port_mapping] can return errors that should be "
-"checked):\n"
-"[codeblock]\n"
-"var upnp = UPNP.new()\n"
-"upnp.discover()\n"
-"upnp.add_port_mapping(7777)\n"
-"[/codeblock]\n"
-"To close a specific port (e.g. after you have finished using it):\n"
-"[codeblock]\n"
-"upnp.delete_port_mapping(port)\n"
-"[/codeblock]\n"
-"[b]Note:[/b] UPnP discovery blocks the current thread. To perform discovery "
-"without blocking the main thread, use [Thread]s like this:\n"
-"[codeblock]\n"
-"# Emitted when UPnP port mapping setup is completed (regardless of success "
-"or failure).\n"
-"signal upnp_completed(error)\n"
-"\n"
-"# Replace this with your own server port number between 1024 and 65535.\n"
-"const SERVER_PORT = 3928\n"
-"var thread = null\n"
-"\n"
-"func _upnp_setup(server_port):\n"
-"    # UPNP queries take some time.\n"
-"    var upnp = UPNP.new()\n"
-"    var err = upnp.discover()\n"
-"\n"
-"    if err != OK:\n"
-"        push_error(str(err))\n"
-"        emit_signal(\"upnp_completed\", err)\n"
-"        return\n"
-"\n"
-"    if upnp.get_gateway() and upnp.get_gateway().is_valid_gateway():\n"
-"        upnp.add_port_mapping(server_port, server_port, ProjectSettings."
-"get_setting(\"application/config/name\"), \"UDP\")\n"
-"        upnp.add_port_mapping(server_port, server_port, ProjectSettings."
-"get_setting(\"application/config/name\"), \"TCP\")\n"
-"        emit_signal(\"upnp_completed\", OK)\n"
-"\n"
-"func _ready():\n"
-"    thread = Thread.new()\n"
-"    thread.start(self, \"_upnp_setup\", SERVER_PORT)\n"
-"\n"
-"func _exit_tree():\n"
-"    # Wait for thread finish here to handle game exit while the thread is "
-"running.\n"
-"    thread.wait_to_finish()\n"
-"[/codeblock]\n"
-"[b]Terminology:[/b] In the context of UPnP networking, \"gateway\" (or "
-"\"internet gateway device\", short IGD) refers to network devices that allow "
-"computers in the local network to access the internet (\"wide area "
-"network\", WAN). These gateways are often also called \"routers\".\n"
-"[b]Pitfalls:[/b]\n"
-"- As explained above, these calls are blocking and shouldn't be run on the "
-"main thread, especially as they can block for multiple seconds at a time. "
-"Use threading!\n"
-"- Networking is physical and messy. Packets get lost in transit or get "
-"filtered, addresses, free ports and assigned mappings change, and devices "
-"may leave or join the network at any time. Be mindful of this, be diligent "
-"when checking and handling errors, and handle these gracefully if you can: "
-"add clear error UI, timeouts and re-try handling.\n"
-"- Port mappings may change (and be removed) at any time, and the remote/"
-"external IP address of the gateway can change likewise. You should consider "
-"re-querying the external IP and try to update/refresh the port mapping "
-"periodically (for example, every 5 minutes and on networking failures).\n"
-"- Not all devices support UPnP, and some users disable UPnP support. You "
-"need to handle this (e.g. documenting and requiring the user to manually "
-"forward ports, or adding alternative methods of NAT traversal, like a relay/"
-"mirror server, or NAT hole punching, STUN/TURN, etc.).\n"
-"- Consider what happens on mapping conflicts. Maybe multiple users on the "
-"same network would like to play your game at the same time, or maybe another "
-"application uses the same port. Make the port configurable, and optimally "
-"choose a port automatically (re-trying with a different port on failure).\n"
-"[b]Further reading:[/b] If you want to know more about UPnP (and the "
-"Internet Gateway Device (IGD) and Port Control Protocol (PCP) specifically), "
-"[url=https://en.wikipedia.org/wiki/Universal_Plug_and_Play]Wikipedia[/url] "
-"is a good first stop, the specification can be found at the [url=https://"
-"openconnectivity.org/developer/specifications/upnp-resources/upnp/]Open "
-"Connectivity Foundation[/url] and Godot's implementation is based on the "
-"[url=https://github.com/miniupnp/miniupnp]MiniUPnP client[/url]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Adds the given [UPNPDevice] to the list of discovered devices."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Adds a mapping to forward the external [code]port[/code] (between 1 and "
-"65535, although recommended to use port 1024 or above) on the default "
-"gateway (see [method get_gateway]) to the [code]internal_port[/code] on the "
-"local machine for the given protocol [code]proto[/code] (either [code]TCP[/"
-"code] or [code]UDP[/code], with UDP being the default). If a port mapping "
-"for the given port and protocol combination already exists on that gateway "
-"device, this method tries to overwrite it. If that is not desired, you can "
-"retrieve the gateway manually with [method get_gateway] and call [method "
-"add_port_mapping] on it, if any. Note that forwarding a well-known port "
-"(below 1024) with UPnP may fail depending on the device.\n"
-"Depending on the gateway device, if a mapping for that port already exists, "
-"it will either be updated or it will refuse this command due to that "
-"conflict, especially if the existing mapping for that port wasn't created "
-"via UPnP or points to a different network address (or device) than this "
-"one.\n"
-"If [code]internal_port[/code] is [code]0[/code] (the default), the same port "
-"number is used for both the external and the internal port (the [code]port[/"
-"code] value).\n"
-"The description ([code]desc[/code]) is shown in some routers management UIs "
-"and can be used to point out which application added the mapping.\n"
-"The mapping's lease [code]duration[/code] can be limited by specifying a "
-"duration in seconds. The default of [code]0[/code] means no duration, i.e. a "
-"permanent lease and notably some devices only support these permanent "
-"leases. Note that whether permanent or not, this is only a request and the "
-"gateway may still decide at any point to remove the mapping (which usually "
-"happens on a reboot of the gateway, when its external IP address changes, or "
-"on some models when it detects a port mapping has become inactive, i.e. had "
-"no traffic for multiple minutes). If not [code]0[/code] (permanent), the "
-"allowed range according to spec is between [code]120[/code] (2 minutes) and "
-"[code]86400[/code] seconds (24 hours).\n"
-"See [enum UPNPResult] for possible return values."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Clears the list of discovered devices."
-msgstr "Leert die Liste der entdeckten Geräte."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Deletes the port mapping for the given port and protocol combination on the "
-"default gateway (see [method get_gateway]) if one exists. [code]port[/code] "
-"must be a valid port between 1 and 65535, [code]proto[/code] can be either "
-"[code]TCP[/code] or [code]UDP[/code]. May be refused for mappings pointing "
-"to addresses other than this one, for well-known ports (below 1024), or for "
-"mappings not added via UPnP. See [enum UPNPResult] for possible return "
-"values."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Discovers local [UPNPDevice]s. Clears the list of previously discovered "
-"devices.\n"
-"Filters for IGD (InternetGatewayDevice) type devices by default, as those "
-"manage port forwarding. [code]timeout[/code] is the time to wait for "
-"responses in milliseconds. [code]ttl[/code] is the time-to-live; only touch "
-"this if you know what you're doing.\n"
-"See [enum UPNPResult] for possible return values."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Returns the [UPNPDevice] at the given [code]index[/code]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Returns the number of discovered [UPNPDevice]s."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Returns the default gateway. That is the first discovered [UPNPDevice] that "
-"is also a valid IGD (InternetGatewayDevice)."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Returns the external [IP] address of the default gateway (see [method "
-"get_gateway]) as string. Returns an empty string on error."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Removes the device at [code]index[/code] from the list of discovered devices."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Sets the device at [code]index[/code] from the list of discovered devices to "
-"[code]device[/code]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "If [code]true[/code], IPv6 is used for [UPNPDevice] discovery."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"If [code]0[/code], the local port to use for discovery is chosen "
-"automatically by the system. If [code]1[/code], discovery will be done from "
-"the source port 1900 (same as destination port). Otherwise, the value will "
-"be used as the port."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Multicast interface to use for discovery. Uses the default multicast "
-"interface if empty."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "UPNP command or discovery was successful."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Not authorized to use the command on the [UPNPDevice]. May be returned when "
-"the user disabled UPNP on their router."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"No port mapping was found for the given port, protocol combination on the "
-"given [UPNPDevice]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Inconsistent parameters."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"No such entry in array. May be returned if a given port, protocol "
-"combination is not found on an [UPNPDevice]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "The action failed."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"The [UPNPDevice] does not allow wildcard values for the source IP address."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "The [UPNPDevice] does not allow wildcard values for the external port."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "The [UPNPDevice] does not allow wildcard values for the internal port."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "The remote host value must be a wildcard."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "The external port value must be a wildcard."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"No port maps are available. May also be returned if port mapping "
-"functionality is not available."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Conflict with other mechanism. May be returned instead of [constant "
-"UPNP_RESULT_CONFLICT_WITH_OTHER_MAPPING] if a port mapping conflicts with an "
-"existing one."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Conflict with an existing port mapping."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "External and internal port values must be the same."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"Only permanent leases are supported. Do not use the [code]duration[/code] "
-"parameter when adding port mappings."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid gateway."
-msgstr "ungültiges Gateway."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid port."
-msgstr "ungültiger Port."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid protocol."
-msgstr "ungültiges Protokoll."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid duration."
-msgstr "ungültige Zeitdauer."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid arguments."
-msgstr "ungültiges Argument."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid response."
-msgstr "ungültige Antwort."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Invalid parameter."
-msgstr "ungültiger Parameter."
-
-#: modules/upnp/doc_classes/UPNP.xml modules/upnp/doc_classes/UPNPDevice.xml
-msgid "HTTP error."
-msgstr "HTTP Fehler."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Socket error."
-msgstr "Socket Fehler."
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid "Error allocating memory."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"No gateway available. You may need to call [method discover] first, or "
-"discovery didn't detect any valid IGDs (InternetGatewayDevices)."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml
-msgid ""
-"No devices available. You may need to call [method discover] first, or "
-"discovery didn't detect any valid [UPNPDevice]s."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNP.xml modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Unknown error."
-msgstr "unbekannter Fehler."
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Universal Plug and Play (UPnP) device."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid ""
-"Universal Plug and Play (UPnP) device. See [UPNP] for UPnP discovery and "
-"utility functions. Provides low-level access to UPNP control commands. "
-"Allows to manage port mappings (port forwarding) and to query network "
-"information of the device (like local and external IP address and status). "
-"Note that methods on this class are synchronous and block the calling thread."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid ""
-"Adds a port mapping to forward the given external port on this [UPNPDevice] "
-"for the given protocol to the local machine. See [method UPNP."
-"add_port_mapping]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid ""
-"Deletes the port mapping identified by the given port and protocol "
-"combination on this device. See [method UPNP.delete_port_mapping]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid ""
-"Returns [code]true[/code] if this is a valid IGD (InternetGatewayDevice) "
-"which potentially supports port forwarding."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid ""
-"Returns the external IP address of this [UPNPDevice] or an empty string."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "URL to the device description."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "IDG control URL."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid ""
-"Address of the local machine in the network connecting it to this "
-"[UPNPDevice]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "IGD service type."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "IGD status. See [enum IGDStatus]."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Service type."
-msgstr "Service Typ."
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "OK."
-msgstr "OK."
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Empty HTTP response."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Returned response contained no URLs."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Not a valid IGD."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Disconnected."
-msgstr "getrennt."
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Unknown device."
-msgstr "unbekanntes Gerät."
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Invalid control."
-msgstr ""
-
-#: modules/upnp/doc_classes/UPNPDevice.xml
-msgid "Memory allocation error."
-msgstr ""
-
-#: doc/classes/Variant.xml
-msgid "The most important data type in Godot."
-msgstr ""
-
-#: doc/classes/Variant.xml
-msgid ""
-"In computer programming, a Variant class is a class that is designed to "
-"store a variety of other types. Dynamic programming languages like PHP, Lua, "
-"JavaScript and GDScript like to use them to store variables' data on the "
-"backend. With these Variants, properties are able to change value types "
-"freely.\n"
-"[codeblock]\n"
-"var foo = 2 # foo is dynamically an integer\n"
-"foo = \"Now foo is a string!\"\n"
-"foo = Reference.new() # foo is an Object\n"
-"var bar: int = 2 # bar is a statically typed integer.\n"
-"# bar = \"Uh oh! I can't make static variables become a different type!\"\n"
-"[/codeblock]\n"
-"Godot tracks all scripting API variables within Variants. Without even "
-"realizing it, you use Variants all the time. When a particular language "
-"enforces its own rules for keeping data typed, then that language is "
-"applying its own custom logic over the base Variant scripting API.\n"
-"- GDScript automatically wrap values in them. It keeps all data in plain "
-"Variants by default and then optionally enforces custom static typing rules "
-"on variable types.\n"
-"- VisualScript tracks properties inside Variants as well, but it also uses "
-"static typing. The GUI interface enforces that properties have a particular "
-"type that doesn't change over time.\n"
-"- C# is statically typed, but uses the Mono [code]object[/code] type in "
-"place of Godot's Variant class when it needs to represent a dynamic value. "
-"[code]object[/code] is the Mono runtime's equivalent of the same concept.\n"
-"- The statically-typed language NativeScript C++ does not define a built-in "
-"Variant-like class. Godot's GDNative bindings provide their own godot::"
-"Variant class for users; Any point at which the C++ code starts interacting "
-"with the Godot runtime is a place where you might have to start wrapping "
-"data inside Variant objects.\n"
-"The global [method @GDScript.typeof] function returns the enumerated value "
-"of the Variant type stored in the current variable (see [enum Variant."
-"Type]).\n"
-"[codeblock]\n"
-"var foo = 2\n"
-"match typeof(foo):\n"
-"    TYPE_NIL:\n"
-"        print(\"foo is null\")\n"
-"    TYPE_INTEGER:\n"
-"        print(\"foo is an integer\")\n"
-"    TYPE_OBJECT:\n"
-"        # Note that Objects are their own special category.\n"
-"        # To get the name of the underlying Object type, you need the "
-"`get_class()` method.\n"
-"        print(\"foo is a(n) %s\" % foo.get_class()) # inject the class name "
-"into a formatted string.\n"
-"        # Note also that there is not yet any way to get a script's "
-"`class_name` string easily.\n"
-"        # To fetch that value, you need to dig deeply into a hidden "
-"ProjectSettings setting: an Array of Dictionaries called "
-"\"_global_script_classes\".\n"
-"        # Open your project.godot file to see it up close.\n"
-"[/codeblock]\n"
-"A Variant takes up only 20 bytes and can store almost any engine datatype "
-"inside of it. Variants are rarely used to hold information for long periods "
-"of time. Instead, they are used mainly for communication, editing, "
-"serialization and moving data around.\n"
-"Godot has specifically invested in making its Variant class as flexible as "
-"possible; so much so that it is used for a multitude of operations to "
-"facilitate communication between all of Godot's systems.\n"
-"A Variant:\n"
-"- Can store almost any datatype.\n"
-"- Can perform operations between many variants. GDScript uses Variant as its "
-"atomic/native datatype.\n"
-"- Can be hashed, so it can be compared quickly to other variants.\n"
-"- Can be used to convert safely between datatypes.\n"
-"- Can be used to abstract calling methods and their arguments. Godot exports "
-"all its functions through variants.\n"
-"- Can be used to defer calls or move data between threads.\n"
-"- Can be serialized as binary and stored to disk, or transferred via "
-"network.\n"
-"- Can be serialized to text and use it for printing values and editable "
-"settings.\n"
-"- Can work as an exported property, so the editor can edit it universally.\n"
-"- Can be used for dictionaries, arrays, parsers, etc.\n"
-"[b]Containers (Array and Dictionary):[/b] Both are implemented using "
-"variants. A [Dictionary] can match any datatype used as key to any other "
-"datatype. An [Array] just holds an array of Variants. Of course, a Variant "
-"can also hold a [Dictionary] and an [Array] inside, making it even more "
-"flexible.\n"
-"Modifications to a container will modify all references to it. A [Mutex] "
-"should be created to lock it if multi-threaded access is desired."
-msgstr ""
-
-#: doc/classes/VBoxContainer.xml
-msgid "Vertical box container."
-msgstr ""
-
-#: doc/classes/VBoxContainer.xml
-msgid "Vertical box container. See [BoxContainer]."
-msgstr ""
-
-#: doc/classes/VBoxContainer.xml
-msgid "The vertical space between the [VBoxContainer]'s elements."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid "Vector used for 2D math."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"2-element structure that can be used to represent positions in 2D space or "
-"any other pair of numeric values.\n"
-"[b]Note:[/b] In a boolean context, a Vector2 will evaluate to [code]false[/"
-"code] if it's equal to [code]Vector2(0, 0)[/code]. Otherwise, a Vector2 will "
-"always evaluate to [code]true[/code]."
-msgstr ""
-"Ein Struktur aus zwei Elementen die genutzt werden kann um Positionen im 2D-"
-"Raum oder Paare aus zwei Zahlen darzustellen.\n"
-"Es werden Fließkommazahlen als Koordinaten benutzt."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "3Blue1Brown Essence of Linear Algebra"
-msgstr ""
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"Constructs a new Vector2 from the given [code]x[/code] and [code]y[/code]."
-msgstr ""
-"Erzeugt einen neuen [Vector2] aus den übergeben [code]x[/code] und [code]y[/"
-"code]."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns a new vector with all components in absolute values (i.e. positive)."
-msgstr ""
-"Erzeugt einen neuen Vektor mit allen Komponenten als Beträge (also positiv)."
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns this vector's angle with respect to the positive X axis, or [code]"
-"(1, 0)[/code] vector, in radians.\n"
-"For example, [code]Vector2.RIGHT.angle()[/code] will return zero, "
-"[code]Vector2.DOWN.angle()[/code] will return [code]PI / 2[/code] (a quarter "
-"turn, or 90 degrees), and [code]Vector2(1, -1).angle()[/code] will return "
-"[code]-PI / 4[/code] (a negative eighth turn, or -45 degrees).\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"vector2_angle.png]Illustration of the returned angle.[/url]\n"
-"Equivalent to the result of [method @GDScript.atan2] when called with the "
-"vector's [member y] and [member x] as parameters: [code]atan2(y, x)[/code]."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns the angle to the given vector, in radians.\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/master/img/"
-"vector2_angle_to.png]Illustration of the returned angle.[/url]"
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns the angle between the line connecting the two points and the X axis, "
-"in radians.\n"
-"[url=https://raw.githubusercontent.com/godotengine/godot-docs/stable/img/"
-"vector2_angle_to_point.png]Illustration of the returned angle.[/url]"
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns the aspect ratio of this vector, the ratio of [member x] to [member "
-"y]."
-msgstr "Gibt das Verhältnis von [member x] zu [member y] zurück."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns the vector \"bounced off\" from a plane defined by the given normal."
-msgstr "Gibt den Vektor reflektiert an der Ebene des Normalenvektors zurück."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns a new vector with all components rounded up (towards positive "
-"infinity)."
-msgstr ""
-"Gibt einen neuen Vektor zurück, bei dem alle Komponenten aufgerundet sind "
-"(gegen positive Unendlichkeit)."
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"Deprecated, please use [method limit_length] instead.\n"
-"Returns the vector with a maximum length by limiting its length to "
-"[code]length[/code]."
-msgstr ""
-"Gibt den Vektor mit maximaler Länge zurück, indem seine Länge auf "
-"[code]length[/code] begrenzt wird."
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns the 2D analog of the cross product for this vector and [code]with[/"
-"code].\n"
-"This is the signed area of the parallelogram formed by the two vectors. If "
-"the second vector is clockwise from the first vector, then the cross product "
-"is the positive area. If counter-clockwise, the cross product is the "
-"negative area.\n"
-"[b]Note:[/b] Cross product is not defined in 2D mathematically. This method "
-"embeds the 2D vectors in the XY plane of 3D space and uses their cross "
-"product's Z component as the analog."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"Cubically interpolates between this vector and [code]b[/code] using "
-"[code]pre_a[/code] and [code]post_b[/code] as handles, and returns the "
-"result at position [code]weight[/code]. [code]weight[/code] is on the range "
-"of 0.0 to 1.0, representing the amount of interpolation."
-msgstr ""
-"Interpoliert kubisch zwischen diesem Vektor und [code]b[/code], wobei "
-"[code]pre_a[/code] und [code]post_b[/code] als Griffe benutzt werden, und "
-"gibt das Ergebnis an der Stelle [code]t[/code] zurück. [code]t[/code] liegt "
-"zwischen 0.0 und 1.0 und bezeichnet den Grad der Interpolation."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns the normalized vector pointing from this vector to [code]b[/code]. "
-"This is equivalent to using [code](b - a).normalized()[/code]."
-msgstr "Gibt den Einheitsvektor der von diesem zu [code]b[/code] zeigt zurück."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns the squared distance between this vector and [code]b[/code].\n"
-"This method runs faster than [method distance_to], so prefer it if you need "
-"to compare vectors or need the squared distance for some formula."
-msgstr ""
-"Gibt den quadrierten Abstand zwischen diesem Vektor und [code]b[/code] "
-"zurück.\n"
-"Diese Funktion ist schneller als [method distance_to], also bevorzuge sie, "
-"wenn du Vektoren vergleichst oder die quadrierte Distanz für eine Formel "
-"brauchst."
-
-#: doc/classes/Vector2.xml
-msgid "Returns the distance between this vector and [code]to[/code]."
-msgstr "Gibt den Abstand zwischen diesem Vektor und [code]bis[/code] zurück."
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns the dot product of this vector and [code]with[/code]. This can be "
-"used to compare the angle between two vectors. For example, this can be used "
-"to determine whether an enemy is facing the player.\n"
-"The dot product will be [code]0[/code] for a straight angle (90 degrees), "
-"greater than 0 for angles narrower than 90 degrees and lower than 0 for "
-"angles wider than 90 degrees.\n"
-"When using unit (normalized) vectors, the result will always be between "
-"[code]-1.0[/code] (180 degree angle) when the vectors are facing opposite "
-"directions, and [code]1.0[/code] (0 degree angle) when the vectors are "
-"aligned.\n"
-"[b]Note:[/b] [code]a.dot(b)[/code] is equivalent to [code]b.dot(a)[/code]."
-msgstr ""
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns a new vector with all components rounded down (towards negative "
-"infinity)."
-msgstr ""
-"Gibt einen neuen Vektor zurück, bei dem alle Komponenten abgerundet sind "
-"(gegen negativ unendlich)."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns [code]true[/code] if this vector and [code]v[/code] are "
-"approximately equal, by running [method @GDScript.is_equal_approx] on each "
-"component."
-msgstr ""
-"Gibt [code]true[/code] falls dieser Vektor und Vektor [code]v[/code] "
-"ungefähr gleich sind, wobei [method @GDScript.is_equal_approx] mit beiden "
-"Komponenten aufgerufen wird."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the vector is normalized, [code]false[/code] "
-"otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Vektor normalisiert ist, andernfalls "
-"false."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "Returns the length (magnitude) of this vector."
-msgstr "Gibt die Länge (Betrag) dieses Vektors zurück."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns the squared length (squared magnitude) of this vector.\n"
-"This method runs faster than [method length], so prefer it if you need to "
-"compare vectors or need the squared distance for some formula."
-msgstr ""
-"Gibt die quadrierte Länge des Vektors zurück. \n"
-"Diese Funktion ist schneller als [method length] also bevorzuge sie, wenn du "
-"Vektoren vergleichst oder die quadrierte Distanz für eine Formel brauchst."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns the vector with a maximum length by limiting its length to "
-"[code]length[/code]."
-msgstr ""
-"Gibt den Vektor mit maximaler Länge zurück, indem seine Länge auf "
-"[code]length[/code] begrenzt wird."
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"Returns the result of the linear interpolation between this vector and "
-"[code]to[/code] by amount [code]weight[/code]. [code]weight[/code] is on the "
-"range of 0.0 to 1.0, representing the amount of interpolation."
-msgstr ""
-"Gibt das Ergebnis der Linearinterpolation zwischen diesem Vektor und "
-"[code]b[/code] um den Wert [code]t[/code] zurück. [code]t[/code] liegt "
-"zwischen 0.0 und 1.0 und bezeichnet den Grad der Interpolation."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns a new vector moved toward [code]to[/code] by the fixed [code]delta[/"
-"code] amount. Will not go past the final value."
-msgstr ""
-"Bewegt den Vektor Richtung [code]to[/code] für den festen Betrag "
-"[code]delta[/code]."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns the vector scaled to unit length. Equivalent to [code]v / v.length()"
-"[/code]."
-msgstr ""
-"Gibt den Vektor auf Einheitslänge skaliert zurück. Dh gibt den "
-"Einheitsvektor in die gleiche Richtung zurück. Entspricht [code]v / v."
-"length()[/code]."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns a vector composed of the [method @GDScript.fposmod] of this vector's "
-"components and [code]mod[/code]."
-msgstr ""
-"Gibt den Vektor zurück der entsteht, wenn [method @GDScript.fposmod] auf die "
-"Komponenten dieses Vektors und [code]mod[/code] ausgeführt wird."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns a vector composed of the [method @GDScript.fposmod] of this vector's "
-"components and [code]modv[/code]'s components."
-msgstr ""
-"Gibt den Vektor zurück der entsteht, wenn [method @GDScript.fposmod] auf die "
-"Komponenten dieses Vektors und [code]modv[/code] ausgeführt wird."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid "Returns this vector projected onto the vector [code]b[/code]."
-msgstr "Gibt die Projektion dieses Vektors auf [code]b[/code] zurück."
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"Returns the vector reflected (i.e. mirrored, or symmetric) over a line "
-"defined by the given direction vector [code]n[/code]."
-msgstr ""
-"Gibt die Reflexion dieses Vektors auf die Ebene des übergebenen "
-"Normalenvektors zurück."
-
-#: doc/classes/Vector2.xml
-#, fuzzy
-msgid ""
-"Returns the vector rotated by [code]angle[/code] (in radians). See also "
-"[method @GDScript.deg2rad]."
-msgstr ""
-"Gibt den Vektor rotiert um [code]phi[/code] rad zurück. Siehe auch [method "
-"@GDScript.deg2rad]."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns a new vector with all components rounded to the nearest integer, "
-"with halfway cases rounded away from zero."
-msgstr ""
-"Gibt den Vektor zurück der entsteht wenn alle Komponenten zur nächsten "
-"Ganzzahl gerundet werden, wobei 0,5 immer weg von der Null gerundet wird."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns a new vector with each component set to one or negative one, "
-"depending on the signs of the components. If a component is zero, it returns "
-"positive one."
-msgstr ""
-"Gibt den Vektor zurück, bei dem jede Komponente auf eins oder negativ "
-"gesetzt ist, je nach Vorzeichen der Komponenten, oder null, wenn die "
-"Komponente null ist, durch Aufruf der [method @GDScript.sign] für jede "
-"Komponente."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns the result of spherical linear interpolation between this vector and "
-"[code]to[/code], by amount [code]weight[/code]. [code]weight[/code] is on "
-"the range of 0.0 to 1.0, representing the amount of interpolation.\n"
-"[b]Note:[/b] Both vectors must be normalized."
-msgstr ""
-"Gibt das Ergebnis der sphärischen Linearinterpolation zwischen diesem Vektor "
-"und [code]b[/code], in Position [code]t[/code] zurück. [code]t[/code] ist im "
-"Interval von 0.0 bis 1.0 und bezeichnet den Grad der Interpolation.\n"
-"[b]Hinweis:[/b] Beide Vektoren müssen normalisiert sein."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "Returns this vector slid along a plane defined by the given normal."
-msgstr ""
-"Gibt diesen Vektor gleitend entlang einer Ebene zurück, die durch die "
-"angegebene Normale definiert ist."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Returns this vector with each component snapped to the nearest multiple of "
-"[code]step[/code]. This can also be used to round to an arbitrary number of "
-"decimals."
-msgstr ""
-"Gibt diesen Vektor zurück, wobei jede Komponente auf das nächstliegende "
-"Vielfache von [code]step[/code] gerundet ist. Dies kann zum Runden auf eine "
-"beliebige Anzahl von Nachkommastellen verwendet werden."
-
-#: doc/classes/Vector2.xml
-msgid ""
-"Returns a perpendicular vector rotated 90 degrees counter-clockwise compared "
-"to the original, with the same length."
-msgstr ""
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"The vector's X component. Also accessible by using the index position [code]"
-"[0][/code]."
-msgstr ""
-"Die x-Komponente des Vektors. Ebenfalls verfügbar unter der Indexposition "
-"[code][0][/code]."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"The vector's Y component. Also accessible by using the index position [code]"
-"[1][/code]."
-msgstr ""
-"Die y-Komponente des Vektors. Ebenfalls verfügbar unter der Indexposition "
-"[code][1][/code]."
-
-#: doc/classes/Vector2.xml
-msgid "Enumerated value for the X axis."
-msgstr "Numerischer Wert für die x-Achse."
-
-#: doc/classes/Vector2.xml
-msgid "Enumerated value for the Y axis."
-msgstr "Numerischer Wert für die y-Achse."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "Zero vector, a vector with all components set to [code]0[/code]."
-msgstr ""
-"Nullvektor, ein Vektor, bei dem alle Komponenten auf [code]0[/code] "
-"festgelegt sind."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid "One vector, a vector with all components set to [code]1[/code]."
-msgstr ""
-"Einser Vektor, ein Vektor bei dem alle Komponenten auf [code]1[/code] "
-"gesetzt sind."
-
-#: doc/classes/Vector2.xml doc/classes/Vector3.xml
-msgid ""
-"Infinity vector, a vector with all components set to [constant @GDScript."
-"INF]."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid "Left unit vector. Represents the direction of left."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid "Right unit vector. Represents the direction of right."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid "Up unit vector. Y is down in 2D, so this vector points -Y."
-msgstr ""
-
-#: doc/classes/Vector2.xml
-msgid "Down unit vector. Y is down in 2D, so this vector points +Y."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid "Vector used for 3D math."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"3-element structure that can be used to represent positions in 3D space or "
-"any other triplet of numeric values.\n"
-"[b]Note:[/b] In a boolean context, a Vector3 will evaluate to [code]false[/"
-"code] if it's equal to [code]Vector3(0, 0, 0)[/code]. Otherwise, a Vector3 "
-"will always evaluate to [code]true[/code]."
-msgstr ""
-"Ein Struktur aus zwei Elementen die genutzt werden kann um Positionen im 2D-"
-"Raum oder Paare aus zwei Zahlen darzustellen.\n"
-"Es werden Fließkommazahlen als Koordinaten benutzt."
-
-#: doc/classes/Vector3.xml
-#, fuzzy
-msgid "Returns a Vector3 with the given components."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/Vector3.xml
-#, fuzzy
-msgid "Returns the unsigned minimum angle to the given vector, in radians."
-msgstr "Gibt den minimalen Winkel zum angegebenen Vektor in Bogenmaß zurück."
-
-#: doc/classes/Vector3.xml
-msgid "Returns the cross product of this vector and [code]b[/code]."
-msgstr "Gibt das Kreuzprodukt aus diesem Vektor und [code]b[/code] zurück."
-
-#: doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Performs a cubic interpolation between this vector and [code]b[/code] using "
-"[code]pre_a[/code] and [code]post_b[/code] as handles, and returns the "
-"result at position [code]weight[/code]. [code]weight[/code] is on the range "
-"of 0.0 to 1.0, representing the amount of interpolation."
-msgstr ""
-"Interpoliert kubisch zwischen diesem Vektor und [code]b[/code], wobei "
-"[code]pre_a[/code] und [code]post_b[/code] als Griffe benutzt werden, und "
-"gibt das Ergebnis an der Stelle [code]t[/code] zurück. [code]t[/code] liegt "
-"zwischen 0.0 und 1.0 und bezeichnet den Grad der Interpolation."
-
-#: doc/classes/Vector3.xml
-msgid "Returns the distance between this vector and [code]b[/code]."
-msgstr "Gibt den Abstand zwischen diesem Vektor und [code]b[/code] zurück."
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Returns the dot product of this vector and [code]b[/code]. This can be used "
-"to compare the angle between two vectors. For example, this can be used to "
-"determine whether an enemy is facing the player.\n"
-"The dot product will be [code]0[/code] for a straight angle (90 degrees), "
-"greater than 0 for angles narrower than 90 degrees and lower than 0 for "
-"angles wider than 90 degrees.\n"
-"When using unit (normalized) vectors, the result will always be between "
-"[code]-1.0[/code] (180 degree angle) when the vectors are facing opposite "
-"directions, and [code]1.0[/code] (0 degree angle) when the vectors are "
-"aligned.\n"
-"[b]Note:[/b] [code]a.dot(b)[/code] is equivalent to [code]b.dot(a)[/code]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Returns the inverse of the vector. This is the same as [code]Vector3( 1.0 / "
-"v.x, 1.0 / v.y, 1.0 / v.z )[/code]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Returns the result of the linear interpolation between this vector and "
-"[code]to[/code] by amount [code]t[/code]. [code]weight[/code] is on the "
-"range of 0.0 to 1.0, representing the amount of interpolation."
-msgstr ""
-"Gibt das Ergebnis der Linearinterpolation zwischen diesem Vektor und "
-"[code]b[/code] um den Wert [code]t[/code] zurück. [code]t[/code] liegt "
-"zwischen 0.0 und 1.0 und bezeichnet den Grad der Interpolation."
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Returns the axis of the vector's largest value. See [code]AXIS_*[/code] "
-"constants. If all components are equal, this method returns [constant "
-"AXIS_X]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Returns the axis of the vector's smallest value. See [code]AXIS_*[/code] "
-"constants. If all components are equal, this method returns [constant "
-"AXIS_Z]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid "Returns the outer product with [code]b[/code]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid "Returns this vector reflected from a plane defined by the given normal."
-msgstr ""
-"Gibt die Reflexion dieses Vektors auf die Ebene des übergebenen "
-"Normalenvektors zurück."
-
-#: doc/classes/Vector3.xml
-#, fuzzy
-msgid ""
-"Rotates this vector around a given axis by [code]angle[/code] (in radians). "
-"The axis must be a normalized vector."
-msgstr ""
-"Dreht diesen Vektor um eine gegebene Achse um [code]phi[/code] Bogenmaß. Die "
-"Achse muss ein normierter Vektor sein."
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Returns the signed angle to the given vector, in radians. The sign of the "
-"angle is positive in a counter-clockwise direction and negative in a "
-"clockwise direction when viewed from the side specified by the [code]axis[/"
-"code]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Returns a diagonal matrix with the vector as main diagonal.\n"
-"This is equivalent to a Basis with no rotation or shearing and this vector's "
-"components set as the scale."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"The vector's Z component. Also accessible by using the index position [code]"
-"[2][/code]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Enumerated value for the X axis. Returned by [method max_axis] and [method "
-"min_axis]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Enumerated value for the Y axis. Returned by [method max_axis] and [method "
-"min_axis]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Enumerated value for the Z axis. Returned by [method max_axis] and [method "
-"min_axis]."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Left unit vector. Represents the local direction of left, and the global "
-"direction of west."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Right unit vector. Represents the local direction of right, and the global "
-"direction of east."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid "Up unit vector."
-msgstr "Hoch-Einheitsvektor."
-
-#: doc/classes/Vector3.xml
-msgid "Down unit vector."
-msgstr "Runter-Einheitsvektor."
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Forward unit vector. Represents the local direction of forward, and the "
-"global direction of north."
-msgstr ""
-
-#: doc/classes/Vector3.xml
-msgid ""
-"Back unit vector. Represents the local direction of back, and the global "
-"direction of south."
-msgstr ""
-
-#: doc/classes/VehicleBody.xml
-msgid "Physics body that simulates the behavior of a car."
-msgstr ""
-
-#: doc/classes/VehicleBody.xml
-msgid ""
-"This node implements all the physics logic needed to simulate a car. It is "
-"based on the raycast vehicle system commonly found in physics engines. You "
-"will need to add a [CollisionShape] for the main body of your vehicle and "
-"add [VehicleWheel] nodes for the wheels. You should also add a "
-"[MeshInstance] to this node for the 3D model of your car but this model "
-"should not include meshes for the wheels. You should control the vehicle by "
-"using the [member brake], [member engine_force], and [member steering] "
-"properties and not change the position or orientation of this node "
-"directly.\n"
-"[b]Note:[/b] The origin point of your VehicleBody will determine the center "
-"of gravity of your vehicle so it is better to keep this low and move the "
-"[CollisionShape] and [MeshInstance] upwards.\n"
-"[b]Note:[/b] This class has known issues and isn't designed to provide "
-"realistic 3D vehicle physics. If you want advanced vehicle physics, you will "
-"probably have to write your own physics integration using another "
-"[PhysicsBody] class."
-msgstr ""
-
-#: doc/classes/VehicleBody.xml
-msgid ""
-"Slows down the vehicle by applying a braking force. The vehicle is only "
-"slowed down if the wheels are in contact with a surface. The force you need "
-"to apply to adequately slow down your vehicle depends on the [member "
-"RigidBody.mass] of the vehicle. For a vehicle with a mass set to 1000, try a "
-"value in the 25 - 30 range for hard braking."
-msgstr ""
-
-#: doc/classes/VehicleBody.xml
-msgid ""
-"Accelerates the vehicle by applying an engine force. The vehicle is only "
-"sped up if the wheels that have [member VehicleWheel.use_as_traction] set to "
-"[code]true[/code] and are in contact with a surface. The [member RigidBody."
-"mass] of the vehicle has an effect on the acceleration of the vehicle. For a "
-"vehicle with a mass set to 1000, try a value in the 25 - 50 range for "
-"acceleration.\n"
-"[b]Note:[/b] The simulation does not take the effect of gears into account, "
-"you will need to add logic for this if you wish to simulate gears.\n"
-"A negative value will result in the vehicle reversing."
-msgstr ""
-
-#: doc/classes/VehicleBody.xml
-msgid ""
-"The steering angle for the vehicle. Setting this to a non-zero value will "
-"result in the vehicle turning when it's moving. Wheels that have [member "
-"VehicleWheel.use_as_steering] set to [code]true[/code] will automatically be "
-"rotated."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid "Physics object that simulates the behavior of a wheel."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"This node needs to be used as a child node of [VehicleBody] and simulates "
-"the behavior of one of its wheels. This node also acts as a collider to "
-"detect if the wheel is touching a surface.\n"
-"[b]Note:[/b] This class has known issues and isn't designed to provide "
-"realistic 3D vehicle physics. If you want advanced vehicle physics, you will "
-"probably have to write your own physics integration using another "
-"[PhysicsBody] class."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"Returns the contacting body node if valid in the tree, as [Spatial]. At the "
-"moment, [GridMap] is not supported so the node will be always of type "
-"[PhysicsBody].\n"
-"Returns [code]null[/code] if the wheel is not in contact with a surface, or "
-"the contact body is not a [PhysicsBody]."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid "Returns the rotational speed of the wheel in revolutions per minute."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"Returns a value between 0.0 and 1.0 that indicates whether this wheel is "
-"skidding. 0.0 is skidding (the wheel has lost grip, e.g. icy terrain), 1.0 "
-"means not skidding (the wheel has full grip, e.g. dry asphalt road)."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid "Returns [code]true[/code] if this wheel is in contact with a surface."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"Slows down the wheel by applying a braking force. The wheel is only slowed "
-"down if it is in contact with a surface. The force you need to apply to "
-"adequately slow down your vehicle depends on the [member RigidBody.mass] of "
-"the vehicle. For a vehicle with a mass set to 1000, try a value in the 25 - "
-"30 range for hard braking."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"The damping applied to the spring when the spring is being compressed. This "
-"value should be between 0.0 (no damping) and 1.0. A value of 0.0 means the "
-"car will keep bouncing as the spring keeps its energy. A good value for this "
-"is around 0.3 for a normal car, 0.5 for a race car."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"The damping applied to the spring when relaxing. This value should be "
-"between 0.0 (no damping) and 1.0. This value should always be slightly "
-"higher than the [member damping_compression] property. For a [member "
-"damping_compression] value of 0.3, try a relaxation value of 0.5."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"Accelerates the wheel by applying an engine force. The wheel is only sped up "
-"if it is in contact with a surface. The [member RigidBody.mass] of the "
-"vehicle has an effect on the acceleration of the vehicle. For a vehicle with "
-"a mass set to 1000, try a value in the 25 - 50 range for acceleration.\n"
-"[b]Note:[/b] The simulation does not take the effect of gears into account, "
-"you will need to add logic for this if you wish to simulate gears.\n"
-"A negative value will result in the wheel reversing."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"The steering angle for the wheel. Setting this to a non-zero value will "
-"result in the vehicle turning when it's moving."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"The maximum force the spring can resist. This value should be higher than a "
-"quarter of the [member RigidBody.mass] of the [VehicleBody] or the spring "
-"will not carry the weight of the vehicle. Good results are often obtained by "
-"a value that is about 3× to 4× this number."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"This value defines the stiffness of the suspension. Use a value lower than "
-"50 for an off-road car, a value between 50 and 100 for a race car and try "
-"something around 200 for something like a Formula 1 car."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"This is the distance the suspension can travel. As Godot units are "
-"equivalent to meters, keep this setting relatively low. Try a value between "
-"0.1 and 0.3 depending on the type of car."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"If [code]true[/code], this wheel will be turned when the car steers. This "
-"value is used in conjunction with [member VehicleBody.steering] and ignored "
-"if you are using the per-wheel [member steering] value instead."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"If [code]true[/code], this wheel transfers engine force to the ground to "
-"propel the vehicle forward. This value is used in conjunction with [member "
-"VehicleBody.engine_force] and ignored if you are using the per-wheel [member "
-"engine_force] value instead."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"This determines how much grip this wheel has. It is combined with the "
-"friction setting of the surface the wheel is in contact with. 0.0 means no "
-"grip, 1.0 is normal grip. For a drift car setup, try setting the grip of the "
-"rear wheels slightly lower than the front wheels, or use a lower value to "
-"simulate tire wear.\n"
-"It's best to set this to 1.0 when starting out."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid "The radius of the wheel in meters."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"This is the distance in meters the wheel is lowered from its origin point. "
-"Don't set this to 0.0 and move the wheel into position, instead move the "
-"origin point of your wheel (the gizmo in Godot) to the position the wheel "
-"will take when bottoming out, then use the rest length to move the wheel "
-"down to the position it should be in when the car is in rest."
-msgstr ""
-
-#: doc/classes/VehicleWheel.xml
-msgid ""
-"This value affects the roll of your vehicle. If set to 1.0 for all wheels, "
-"your vehicle will be prone to rolling over, while a value of 0.0 will resist "
-"body roll."
-msgstr ""
-
-#: doc/classes/VFlowContainer.xml
-msgid "Vertical flow container."
-msgstr ""
-
-#: doc/classes/VFlowContainer.xml
-msgid "Vertical version of [FlowContainer]."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "Control for playing video streams."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"Control node for playing video streams using [VideoStream] resources.\n"
-"Supported video formats are [url=https://www.webmproject.org/]WebM[/url] "
-"([code].webm[/code], [VideoStreamWebm]), [url=https://www.theora.org/]Ogg "
-"Theora[/url] ([code].ogv[/code], [VideoStreamTheora]), and any format "
-"exposed via a GDNative plugin using [VideoStreamGDNative].\n"
-"[b]Note:[/b] Due to a bug, VideoPlayer does not support localization "
-"remapping yet.\n"
-"[b]Warning:[/b] On HTML5, video playback [i]will[/i] perform poorly due to "
-"missing architecture-specific assembly optimizations, especially for VP8/VP9."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"Returns the video stream's name, or [code]\"<No Stream>\"[/code] if no video "
-"stream is assigned."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-#, fuzzy
-msgid "Returns the current frame as a [Texture]."
-msgstr "Gibt die [Texture2D] des angegebenen Rahmens zurück."
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"Returns [code]true[/code] if the video is playing.\n"
-"[b]Note:[/b] The video is still considered playing if paused during playback."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"Starts the video playback from the beginning. If the video is paused, this "
-"will not unpause the video."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"Stops the video playback and sets the stream position to 0.\n"
-"[b]Note:[/b] Although the stream position will be set to 0, the first frame "
-"of the video stream won't become the current frame."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "The embedded audio track to play."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "If [code]true[/code], playback starts when the scene loads."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "Amount of time in milliseconds to store in buffer while playing."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "Audio bus to use for sound playback."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"If [code]true[/code], the video scales to the control size. Otherwise, the "
-"control minimum size will be automatically adjusted to match the video "
-"stream's dimensions."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "If [code]true[/code], the video is paused."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "The assigned video stream. See description for supported formats."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid ""
-"The current position of the stream, in seconds.\n"
-"[b]Note:[/b] Changing this value won't have any effect as seeking is not "
-"implemented yet, except in video formats implemented by a GDNative add-on."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "Audio volume as a linear value."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "Audio volume in dB."
-msgstr ""
-
-#: doc/classes/VideoPlayer.xml
-msgid "Emitted when playback is finished."
-msgstr ""
-
-#: doc/classes/VideoStream.xml
-msgid "Base resource for video streams."
-msgstr ""
-
-#: doc/classes/VideoStream.xml
-msgid ""
-"Base resource type for all video streams. Classes that derive from "
-"[VideoStream] can all be used as resource types to play back videos in "
-"[VideoPlayer]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/VideoStreamGDNative.xml
-msgid "[VideoStream] resource for video formats implemented via GDNative."
-msgstr ""
-
-#: modules/gdnative/doc_classes/VideoStreamGDNative.xml
-msgid ""
-"[VideoStream] resource for video formats implemented via GDNative.\n"
-"It can be used via [url=https://github.com/KidRigger/godot-"
-"videodecoder]godot-videodecoder[/url] which uses the [url=https://ffmpeg."
-"org]FFmpeg[/url] library."
-msgstr ""
-
-#: modules/gdnative/doc_classes/VideoStreamGDNative.xml
-msgid "Returns the video file handled by this [VideoStreamGDNative]."
-msgstr ""
-
-#: modules/gdnative/doc_classes/VideoStreamGDNative.xml
-msgid ""
-"Sets the video file that this [VideoStreamGDNative] resource handles. The "
-"supported extensions depend on the GDNative plugins used to expose video "
-"formats."
-msgstr ""
-
-#: modules/theora/doc_classes/VideoStreamTheora.xml
-msgid "[VideoStream] resource for Ogg Theora videos."
-msgstr ""
-
-#: modules/theora/doc_classes/VideoStreamTheora.xml
-msgid ""
-"[VideoStream] resource handling the [url=https://www.theora.org/]Ogg Theora[/"
-"url] video format with [code].ogv[/code] extension. The Theora codec is less "
-"efficient than [VideoStreamWebm]'s VP8 and VP9, but it requires less CPU "
-"resources to decode. The Theora codec is decoded on the CPU.\n"
-"[b]Note:[/b] While Ogg Theora videos can also have an [code].ogg[/code] "
-"extension, you will have to rename the extension to [code].ogv[/code] to use "
-"those videos within Godot."
-msgstr ""
-
-#: modules/theora/doc_classes/VideoStreamTheora.xml
-msgid "Returns the Ogg Theora video file handled by this [VideoStreamTheora]."
-msgstr ""
-
-#: modules/theora/doc_classes/VideoStreamTheora.xml
-msgid ""
-"Sets the Ogg Theora video file that this [VideoStreamTheora] resource "
-"handles. The [code]file[/code] name should have the [code].ogv[/code] "
-"extension."
-msgstr ""
-
-#: modules/webm/doc_classes/VideoStreamWebm.xml
-msgid "[VideoStream] resource for WebM videos."
-msgstr ""
-
-#: modules/webm/doc_classes/VideoStreamWebm.xml
-msgid ""
-"[VideoStream] resource handling the [url=https://www.webmproject.org/]WebM[/"
-"url] video format with [code].webm[/code] extension. Both the VP8 and VP9 "
-"codecs are supported. The VP8 and VP9 codecs are more efficient than "
-"[VideoStreamTheora], but they require more CPU resources to decode "
-"(especially VP9). Both the VP8 and VP9 codecs are decoded on the CPU.\n"
-"[b]Note:[/b] Alpha channel (also known as transparency) is not supported. "
-"The video will always appear to have a black background, even if it "
-"originally contains an alpha channel.\n"
-"[b]Note:[/b] There are known bugs and performance issues with WebM video "
-"playback in Godot. If you run into problems, try using the Ogg Theora format "
-"instead: [VideoStreamTheora]"
-msgstr ""
-
-#: modules/webm/doc_classes/VideoStreamWebm.xml
-msgid "Returns the WebM video file handled by this [VideoStreamWebm]."
-msgstr ""
-
-#: modules/webm/doc_classes/VideoStreamWebm.xml
-msgid ""
-"Sets the WebM video file that this [VideoStreamWebm] resource handles. The "
-"[code]file[/code] name should have the [code].webm[/code] extension."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Creates a sub-view into the screen."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"A Viewport creates a different view into the screen, or a sub-view inside "
-"another viewport. Children 2D Nodes will display on it, and children Camera "
-"3D nodes will render on it too.\n"
-"Optionally, a viewport can have its own 2D or 3D world, so they don't share "
-"what they draw with other viewports.\n"
-"If a viewport is a child of a [ViewportContainer], it will automatically "
-"take up its size, otherwise it must be set manually.\n"
-"Viewports can also choose to be audio listeners, so they generate positional "
-"audio depending on a 2D or 3D camera child of it.\n"
-"Also, viewports can be assigned to different screens in case the devices "
-"have multiple screens.\n"
-"Finally, viewports can also behave as render targets, in which case they "
-"will not be visible unless the associated texture is used to draw.\n"
-"[b]Note:[/b] By default, a newly created Viewport in Godot 3.x will appear "
-"to be upside down. Enabling [member render_target_v_flip] will display the "
-"Viewport with the correct orientation."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Viewports tutorial index"
-msgstr ""
-
-#: doc/classes/Viewport.xml doc/classes/ViewportTexture.xml
-msgid "3D in 2D Demo"
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Screen Capture Demo"
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Dynamic Split Screen Demo"
-msgstr ""
-
-#: doc/classes/Viewport.xml doc/classes/ViewportTexture.xml
-msgid "3D Viewport Scaling Demo"
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Returns the first valid [World] for this viewport, searching the [member "
-"world] property of itself and any Viewport ancestor."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Returns the first valid [World2D] for this viewport, searching the [member "
-"world_2d] property of itself and any Viewport ancestor."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Returns the active 3D camera."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Returns the total transform of the viewport."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "Returns the topmost modal in the stack."
-msgstr "Gibt den Aktualisierungsmodus einer Wertespur zurück."
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Returns the mouse's position in this [Viewport] using the coordinate system "
-"of this [Viewport]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Returns information about the viewport from the rendering pipeline."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Returns the [enum ShadowAtlasQuadrantSubdiv] of the specified quadrant."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Returns the size override set with [method set_size_override]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Returns the viewport's texture.\n"
-"[b]Note:[/b] Due to the way OpenGL works, the resulting [ViewportTexture] is "
-"flipped vertically. You can use [method Image.flip_y] on the result of "
-"[method Texture.get_data] to flip it back, for example:\n"
-"[codeblock]\n"
-"var img = get_viewport().get_texture().get_data()\n"
-"img.flip_y()\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "Returns the viewport's RID from the [VisualServer]."
-msgstr "Gibt die Größe des Arrays zurück."
-
-#: doc/classes/Viewport.xml
-msgid "Returns the visible rectangle in global screen coordinates."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Returns the drag data from the GUI, that was previously returned by [method "
-"Control.get_drag_data]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if there are visible modals on-screen."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if the drag operation is successful."
-msgstr "Gibt [code]true[/code] zurück falls das Array leer ist."
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Returns [code]true[/code] if the viewport is currently performing a drag "
-"operation.\n"
-"Alternative to [constant Node.NOTIFICATION_DRAG_BEGIN] and [constant Node."
-"NOTIFICATION_DRAG_END] when you prefer polling the value."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid ""
-"Returns [code]true[/code] if the size override is enabled. See [method "
-"set_size_override]."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn die spezifizerte Flagge aktiviert ist. "
-"Siehe die [enum Flags] Aufzählung für Optionen."
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Attaches this [Viewport] to the root [Viewport] with the specified "
-"rectangle. This bypasses the need for another node to display this "
-"[Viewport] but makes you responsible for updating the position of this "
-"[Viewport] manually."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Stops the input from propagating further down the [SceneTree]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Sets the number of subdivisions to use in the specified quadrant. A higher "
-"number of subdivisions allows you to have more shadows in the scene at once, "
-"but reduces the quality of the shadows. A good practice is to have quadrants "
-"with a varying number of subdivisions and to have as few subdivisions as "
-"possible."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Sets the size override of the viewport. If the [code]enable[/code] parameter "
-"is [code]true[/code] the override is used, otherwise it uses the default "
-"size. If the size parameter is [code](-1, -1)[/code], it won't update the "
-"size."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Forces update of the 2D and 3D worlds."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Moves the mouse pointer to the specified position in this [Viewport] using "
-"the coordinate system of this [Viewport]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "If [code]true[/code], the viewport will be used in AR/VR process."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/Viewport.xml
-msgid "If [code]true[/code], the viewport will process 2D audio streams."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "If [code]true[/code], the viewport will process 3D audio streams."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The canvas transform of the viewport, useful for changing the on-screen "
-"positions of all child [CanvasItem]s. This is relative to the global canvas "
-"transform of the viewport."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], uses a fast post-processing filter to make banding "
-"significantly less visible in 3D. 2D rendering is [i]not[/i] affected by "
-"debanding unless the [member Environment.background_mode] is [constant "
-"Environment.BG_CANVAS]. In this case, [member usage] must also be set to "
-"[constant USAGE_3D]. See also [member ProjectSettings.rendering/quality/"
-"filters/use_debanding].\n"
-"In some cases, debanding may introduce a slightly noticeable dithering "
-"pattern. It's recommended to enable debanding only when actually needed "
-"since the dithering pattern will make lossless-compressed screenshots "
-"larger.\n"
-"[b]Note:[/b] Only available on the GLES3 backend. [member hdr] must also be "
-"[code]true[/code] for debanding to be effective."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The overlay mode for test rendered geometry in debug purposes."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the viewport will disable 3D rendering. To actually "
-"disable allocation of 3D buffers, set [member usage] instead."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Enables fast approximate antialiasing. FXAA is a popular screen-space "
-"antialiasing method, which is fast but will make the image look blurry, "
-"especially at lower resolutions. It can still work relatively well at large "
-"resolutions such as 1440p and 4K. Some of the lost sharpness can be "
-"recovered by enabling contrast-adaptive sharpening (see [member "
-"sharpen_intensity])."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The global canvas transform of the viewport. The canvas transform is "
-"relative to this."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "If [code]true[/code], the viewport will not receive input events."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the GUI controls on the viewport will lay pixel "
-"perfectly."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the viewport rendering will receive benefits from High "
-"Dynamic Range algorithm. High Dynamic Range allows the viewport to receive "
-"values that are outside the 0-1 range. In Godot, HDR uses half floating-"
-"point precision (16-bit) by default. To use full floating-point precision "
-"(32-bit), enable [member use_32_bpc_depth].\n"
-"[b]Note:[/b] Requires [member usage] to be set to [constant USAGE_3D] or "
-"[constant USAGE_3D_NO_EFFECTS], since HDR is not supported for 2D.\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the result after 3D rendering will not have a linear "
-"to sRGB color conversion applied. This is important when the viewport is "
-"used as a render target where the result is used as a texture on a 3D object "
-"rendered in another viewport. It is also important if the viewport is used "
-"to create data that is not color based (noise, heightmaps, pickmaps, etc.). "
-"Do not enable this when the viewport is used as a texture on a 2D object or "
-"if the viewport is your final output. For the GLES2 driver this will convert "
-"the sRGB output to linear, this should only be used for VR plugins that "
-"require input in linear color space!"
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The multisample anti-aliasing mode. A higher number results in smoother "
-"edges at the cost of significantly worse performance. A value of 4 is best "
-"unless targeting very high-end systems."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the viewport will use a unique copy of the [World] "
-"defined in [member world]."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn der Skript Bereich lädt, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the objects rendered by viewport become subjects of "
-"mouse picking process."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], renders the Viewport directly to the screen instead of "
-"to the root viewport. Only available in GLES2. This is a low-level "
-"optimization and should not be used in most cases. If used, reading from the "
-"Viewport or from [code]SCREEN_TEXTURE[/code] becomes unavailable. For more "
-"information see [method VisualServer.viewport_set_render_direct_to_screen]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The clear mode when viewport used as a render target.\n"
-"[b]Note:[/b] This property is intended for 2D usage."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The update mode when viewport used as a render target."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the result of rendering will be flipped vertically. "
-"Since Viewports in Godot 3.x render upside-down, it's recommended to set "
-"this to [code]true[/code] in most situations."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The subdivision amount of the first quadrant on the shadow atlas."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The subdivision amount of the second quadrant on the shadow atlas."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The subdivision amount of the third quadrant on the shadow atlas."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The subdivision amount of the fourth quadrant on the shadow atlas."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The shadow atlas' resolution (used for omni and spot lights). The value will "
-"be rounded up to the nearest power of 2.\n"
-"[b]Note:[/b] If this is set to [code]0[/code], both point [i]and[/i] "
-"directional shadows won't be visible. Since user-created viewports default "
-"to a value of [code]0[/code], this value must be set above [code]0[/code] "
-"manually (typically at least [code]256[/code])."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If set to a value greater than [code]0.0[/code], contrast-adaptive "
-"sharpening will be applied to the 3D viewport. This has a low performance "
-"cost and can be used to recover some of the sharpness lost from using FXAA. "
-"Values around [code]0.5[/code] generally give the best results. See also "
-"[member fxaa]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The width and height of viewport. Must be set to a value greater than or "
-"equal to 2 pixels on both dimensions. Otherwise, nothing will be displayed."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-#, fuzzy
-msgid "If [code]true[/code], the size override affects stretch as well."
-msgstr ""
-"Wenn [code]true[/code], hat der Audiobus des Bereichs Vorrang vor dem "
-"Standard-Audiobus."
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], the viewport should render its background as "
-"transparent."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"The viewport's rendering mode. This controls which buffers are allocated for "
-"the viewport (2D only, or 2D + 3D). 2D-only options can reduce memory usage "
-"and improve performance slightly, especially on low-end devices.\n"
-"[b]Note:[/b] If set to [constant USAGE_2D] or [constant "
-"USAGE_2D_NO_SAMPLING], [member hdr] will have no effect when enabled since "
-"HDR is not supported for 2D."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"If [code]true[/code], allocates the viewport's framebuffer with full "
-"floating-point precision (32-bit) instead of half floating-point precision "
-"(16-bit). Only effective when [member hdr] is also enabled.\n"
-"[b]Note:[/b] Enabling this setting does not improve rendering quality. Using "
-"full floating-point precision is slower, and is generally only needed for "
-"advanced shaders that require a high level of precision. To reduce banding, "
-"enable [member debanding] instead.\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The custom [World] which can be used as 3D environment source."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "The custom [World2D] which can be used as 2D environment source."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Emitted when a Control node grabs keyboard focus."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Emitted when the size of the viewport is changed, whether by [method "
-"set_size_override], resize of window, or some other means."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Do not update the render target."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Update the render target once, then switch to [constant UPDATE_DISABLED]."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Update the render target only when it is visible. This is the default value."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Always update the render target."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "This quadrant will not be used."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "This quadrant will only be used by one shadow map."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "This quadrant will be split in 4 and used by up to 4 shadow maps."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "This quadrant will be split 16 ways and used by up to 16 shadow maps."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "This quadrant will be split 64 ways and used by up to 64 shadow maps."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"This quadrant will be split 256 ways and used by up to 256 shadow maps. "
-"Unless the [member shadow_atlas_size] is very high, the shadows in this "
-"quadrant will be very low resolution."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"This quadrant will be split 1024 ways and used by up to 1024 shadow maps. "
-"Unless the [member shadow_atlas_size] is very high, the shadows in this "
-"quadrant will be very low resolution."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Represents the size of the [enum ShadowAtlasQuadrantSubdiv] enum."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of objects in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of vertices in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of material changes in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of shader changes in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of surface changes in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of draw calls in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Amount of items or joined items in frame."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Represents the size of the [enum RenderInfo] enum."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Objects are displayed normally."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Objects are displayed without light information."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Objected are displayed semi-transparent with additive blending so you can "
-"see where they intersect."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Objects are displayed in wireframe style."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Multisample anti-aliasing mode disabled. This is the default value."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Use 2x Multisample Antialiasing."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Use 4x Multisample Antialiasing."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Use 8x Multisample Antialiasing. Likely unsupported on low-end and older "
-"hardware."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Use 16x Multisample Antialiasing. Likely unsupported on medium and low-end "
-"hardware."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Allocates all buffers needed for drawing 2D scenes. This takes less VRAM "
-"than the 3D usage modes. Note that 3D rendering effects such as glow and HDR "
-"are not available when using this mode."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Allocates buffers needed for 2D scenes without allocating a buffer for "
-"screen copy. Accordingly, you cannot read from the screen. Of the [enum "
-"Usage] types, this requires the least VRAM. Note that 3D rendering effects "
-"such as glow and HDR are not available when using this mode."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Allocates full buffers for drawing 3D scenes and all 3D effects including "
-"buffers needed for 2D scenes and effects."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Allocates buffers needed for drawing 3D scenes. But does not allocate "
-"buffers needed for reading from the screen and post-processing effects. "
-"Saves some VRAM."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Always clear the render target before drawing."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid "Never clear the render target."
-msgstr ""
-
-#: doc/classes/Viewport.xml
-msgid ""
-"Clear the render target next frame, then switch to [constant "
-"CLEAR_MODE_NEVER]."
-msgstr ""
-
-#: doc/classes/ViewportContainer.xml
-msgid "Control for holding [Viewport]s."
-msgstr ""
-
-#: doc/classes/ViewportContainer.xml
-msgid ""
-"A [Container] node that holds a [Viewport], automatically setting its size.\n"
-"[b]Note:[/b] Changing a ViewportContainer's [member Control.rect_scale] will "
-"cause its contents to appear distorted. To change its visual size without "
-"causing distortion, adjust the node's margins instead (if it's not already "
-"in a container)."
-msgstr ""
-
-#: doc/classes/ViewportContainer.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the viewport will be scaled to the control's size."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/ViewportContainer.xml
-msgid ""
-"Divides the viewport's effective resolution by this value while preserving "
-"its scale. This can be used to speed up rendering.\n"
-"For example, a 1280×720 viewport with [member stretch_shrink] set to "
-"[code]2[/code] will be rendered at 640×360 while occupying the same size in "
-"the container.\n"
-"[b]Note:[/b] [member stretch] must be [code]true[/code] for this property to "
-"work."
-msgstr ""
-
-#: doc/classes/ViewportTexture.xml
-msgid "Texture which displays the content of a [Viewport]."
-msgstr ""
-
-#: doc/classes/ViewportTexture.xml
-msgid ""
-"Displays the content of a [Viewport] node as a dynamic [Texture]. This can "
-"be used to mix controls, 2D, and 3D elements in the same scene.\n"
-"To create a ViewportTexture in code, use the [method Viewport.get_texture] "
-"method on the target viewport."
-msgstr ""
-
-#: doc/classes/ViewportTexture.xml
-msgid ""
-"The path to the [Viewport] node to display. This is relative to the scene "
-"root, not to the node which uses the texture."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml doc/classes/VisibilityEnabler2D.xml
-msgid "Enables certain nodes only when approximately visible."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml
-msgid ""
-"The VisibilityEnabler will disable [RigidBody] and [AnimationPlayer] nodes "
-"when they are not visible. It will only affect other nodes within the same "
-"scene as the VisibilityEnabler itself.\n"
-"If you just want to receive notifications, use [VisibilityNotifier] "
-"instead.\n"
-"[b]Note:[/b] VisibilityEnabler uses an approximate heuristic for performance "
-"reasons. It doesn't take walls and other occlusion into account (unless you "
-"are using [Portal]s). The heuristic is an implementation detail and may "
-"change in future versions. If you need precise visibility checking, use "
-"another method such as adding an [Area] node as a child of a [Camera] node "
-"and/or [method Vector3.dot].\n"
-"[b]Note:[/b] VisibilityEnabler will not affect nodes added after scene "
-"initialization."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml doc/classes/VisibilityEnabler2D.xml
-msgid ""
-"Returns whether the enabler identified by given [enum Enabler] constant is "
-"active."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml doc/classes/VisibilityEnabler2D.xml
-msgid ""
-"Sets active state of the enabler identified by given [enum Enabler] constant."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml
-#, fuzzy
-msgid "If [code]true[/code], [RigidBody] nodes will be paused."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/VisibilityEnabler.xml doc/classes/VisibilityEnabler2D.xml
-msgid "If [code]true[/code], [AnimationPlayer] nodes will be paused."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml doc/classes/VisibilityEnabler2D.xml
-msgid "This enabler will pause [AnimationPlayer] nodes."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml
-msgid "This enabler will freeze [RigidBody] nodes."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler.xml doc/classes/VisibilityEnabler2D.xml
-msgid "Represents the size of the [enum Enabler] enum."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid ""
-"The VisibilityEnabler2D will disable [RigidBody2D], [AnimationPlayer], and "
-"other nodes when they are not visible. It will only affect nodes with the "
-"same root node as the VisibilityEnabler2D, and the root node itself.\n"
-"If you just want to receive notifications, use [VisibilityNotifier2D] "
-"instead.\n"
-"[b]Note:[/b] For performance reasons, VisibilityEnabler2D uses an "
-"approximate heuristic with precision determined by [member ProjectSettings."
-"world/2d/cell_size]. If you need precise visibility checking, use another "
-"method such as adding an [Area2D] node as a child of a [Camera2D] node.\n"
-"[b]Note:[/b] VisibilityEnabler2D will not affect nodes added after scene "
-"initialization."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid "If [code]true[/code], [RigidBody2D] nodes will be paused."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-#, fuzzy
-msgid "If [code]true[/code], [AnimatedSprite] nodes will be paused."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/VisibilityEnabler2D.xml
-#, fuzzy
-msgid "If [code]true[/code], [Particles2D] nodes will be paused."
-msgstr "Wenn [code]true[/code], wird die Textur zentriert."
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid ""
-"If [code]true[/code], the parent's [method Node._physics_process] will be "
-"stopped."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid ""
-"If [code]true[/code], the parent's [method Node._process] will be stopped."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid "This enabler will freeze [RigidBody2D] nodes."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid "This enabler will stop [Particles2D] nodes."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid "This enabler will stop the parent's [method Node._process] function."
-msgstr ""
-
-#: doc/classes/VisibilityEnabler2D.xml
-#, fuzzy
-msgid ""
-"This enabler will stop the parent's [method Node._physics_process] function."
-msgstr ""
-"Die Animationen werden während des Physikframes (d. h. [method Node."
-"_physics_process]) fortgesetzt."
-
-#: doc/classes/VisibilityEnabler2D.xml
-msgid "This enabler will stop [AnimatedSprite] nodes animations."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier.xml doc/classes/VisibilityNotifier2D.xml
-msgid "Detects approximately when the node is visible on screen."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier.xml
-msgid ""
-"The VisibilityNotifier detects when it is visible on the screen. It also "
-"notifies when its bounding rectangle enters or exits the screen or a "
-"[Camera]'s view.\n"
-"If you want nodes to be disabled automatically when they exit the screen, "
-"use [VisibilityEnabler] instead.\n"
-"[b]Note:[/b] VisibilityNotifier uses an approximate heuristic for "
-"performance reasons. It doesn't take walls and other occlusion into account "
-"(unless you are using [Portal]s). The heuristic is an implementation detail "
-"and may change in future versions. If you need precise visibility checking, "
-"use another method such as adding an [Area] node as a child of a [Camera] "
-"node and/or [method Vector3.dot]."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier.xml
-msgid ""
-"If [code]true[/code], the bounding box is on the screen.\n"
-"[b]Note:[/b] It takes one frame for the node's visibility to be assessed "
-"once added to the scene tree, so this method will return [code]false[/code] "
-"right after it is instantiated, even if it will be on screen in the draw "
-"pass."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier.xml
-msgid "The VisibilityNotifier's bounding box."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier.xml
-msgid ""
-"In addition to checking whether a node is on screen or within a [Camera]'s "
-"view, VisibilityNotifier can also optionally check whether a node is within "
-"a specified maximum distance when using a [Camera] with perspective "
-"projection. This is useful for throttling the performance requirements of "
-"nodes that are far away.\n"
-"[b]Note:[/b] This feature will be disabled if set to 0.0."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier.xml
-#, fuzzy
-msgid "Emitted when the VisibilityNotifier enters a [Camera]'s view."
-msgstr "Gesendet wenn die Sichtbarkeit (versteckt/sichtbar) sich verändert."
-
-#: doc/classes/VisibilityNotifier.xml
-#, fuzzy
-msgid "Emitted when the VisibilityNotifier exits a [Camera]'s view."
-msgstr "Gesendet wenn die Sichtbarkeit (versteckt/sichtbar) sich verändert."
-
-#: doc/classes/VisibilityNotifier.xml
-#, fuzzy
-msgid "Emitted when the VisibilityNotifier enters the screen."
-msgstr "Gesendet wenn die Sichtbarkeit (versteckt/sichtbar) sich verändert."
-
-#: doc/classes/VisibilityNotifier.xml
-#, fuzzy
-msgid "Emitted when the VisibilityNotifier exits the screen."
-msgstr "Gesendet wenn die Sichtbarkeit (versteckt/sichtbar) sich verändert."
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid ""
-"The VisibilityNotifier2D detects when it is visible on the screen. It also "
-"notifies when its bounding rectangle enters or exits the screen or a "
-"viewport.\n"
-"If you want nodes to be disabled automatically when they exit the screen, "
-"use [VisibilityEnabler2D] instead.\n"
-"[b]Note:[/b] For performance reasons, VisibilityNotifier2D uses an "
-"approximate heuristic with precision determined by [member ProjectSettings."
-"world/2d/cell_size]. If you need precise visibility checking, use another "
-"method such as adding an [Area2D] node as a child of a [Camera2D] node."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid ""
-"If [code]true[/code], the bounding rectangle is on the screen.\n"
-"[b]Note:[/b] It takes one frame for the node's visibility to be assessed "
-"once added to the scene tree, so this method will return [code]false[/code] "
-"right after it is instantiated, even if it will be on screen in the draw "
-"pass."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid "The VisibilityNotifier2D's bounding rectangle."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid "Emitted when the VisibilityNotifier2D enters the screen."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid "Emitted when the VisibilityNotifier2D exits the screen."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid "Emitted when the VisibilityNotifier2D enters a [Viewport]'s view."
-msgstr ""
-
-#: doc/classes/VisibilityNotifier2D.xml
-msgid "Emitted when the VisibilityNotifier2D exits a [Viewport]'s view."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid "Parent of all visual 3D nodes."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"The [VisualInstance] is used to connect a resource to a visual "
-"representation. All visual 3D nodes inherit from the [VisualInstance]. In "
-"general, you should not access the [VisualInstance] properties directly as "
-"they are accessed and managed by the nodes that inherit from "
-"[VisualInstance]. [VisualInstance] is the node representation of the "
-"[VisualServer] instance."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"Returns the [AABB] (also known as the bounding box) for this "
-"[VisualInstance]. See also [method get_transformed_aabb]."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"Returns the RID of the resource associated with this [VisualInstance]. For "
-"example, if the Node is a [MeshInstance], this will return the RID of the "
-"associated [Mesh]."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"Returns the RID of this instance. This RID is the same as the RID returned "
-"by [method VisualServer.instance_create]. This RID is needed if you want to "
-"call [VisualServer] functions directly on this [VisualInstance]."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"Returns [code]true[/code] when the specified layer is enabled in [member "
-"layers] and [code]false[/code] otherwise."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"Returns the transformed [AABB] (also known as the bounding box) for this "
-"[VisualInstance].\n"
-"Transformed in this case means the [AABB] plus the position, rotation, and "
-"scale of the [Spatial]'s [Transform]. See also [method get_aabb]."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"Sets the resource that is instantiated by this [VisualInstance], which "
-"changes how the engine handles the [VisualInstance] under the hood. "
-"Equivalent to [method VisualServer.instance_set_base]."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid "Enables a particular layer in [member layers]."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"The render layer(s) this [VisualInstance] is drawn on.\n"
-"This object will only be visible for [Camera]s whose cull mask includes the "
-"render object this [VisualInstance] is set to."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"The sorting offset used by this [VisualInstance]. Adjusting it to a higher "
-"value will make the [VisualInstance] reliably draw on top of other "
-"[VisualInstance]s that are otherwise positioned at the same spot."
-msgstr ""
-
-#: doc/classes/VisualInstance.xml
-msgid ""
-"If [code]true[/code], the object is sorted based on the [AABB] center. "
-"Sorted based on the global position otherwise.\n"
-"The [AABB] center based sorting is generally more accurate for 3D models. "
-"The position based sorting instead allows to better control the drawing "
-"order when working with [Particles] and [CPUParticles]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "A script implemented in the Visual Script programming environment."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"A script implemented in the Visual Script programming environment. The "
-"script extends the functionality of all objects that instance it.\n"
-"[method Object.set_script] extends an existing object, if that object's "
-"class matches one of the script's base classes.\n"
-"You are most likely to use this class via the Visual Script editor or when "
-"writing plugins for it."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Add a custom signal with the specified name to the VisualScript."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Add a function with the specified name to the VisualScript."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Add a node to a function of the VisualScript."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Add a variable to the VisualScript, optionally giving it a default value or "
-"marking it as exported."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Add an argument to a custom signal added with [method add_custom_signal]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Get the count of a custom signal's arguments."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Get the name of a custom signal's argument."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Get the type of a custom signal's argument."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Remove a specific custom signal's argument."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Rename a custom signal's argument."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Change the type of a custom signal's argument."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Swap two of the arguments of a custom signal."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Connect two data ports. The value of [code]from_node[/code]'s "
-"[code]from_port[/code] would be fed into [code]to_node[/code]'s "
-"[code]to_port[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Disconnect two data ports previously connected with [method data_connect]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns the id of a function's entry point node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns the position of the center of the screen for a given function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns a node given its id and its function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns a node's position in pixels."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns the default (initial) value of a variable."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether a variable is exported."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Returns the information for a given variable as a dictionary. The "
-"information includes its name, type, hint and usage."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether a signal exists with the specified name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether the specified data ports are connected."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether a function exists with the specified name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether a node exists with the given id."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether the specified sequence ports are connected."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Returns whether a variable exists with the specified name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Remove a custom signal with the given name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Remove a specific function and its nodes from the script."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Remove a specific node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Remove a variable with the given name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Change the name of a custom signal."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Change the name of a function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Change the name of a variable."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Connect two sequence ports. The execution will flow from of [code]from_node[/"
-"code]'s [code]from_output[/code] into [code]to_node[/code].\n"
-"Unlike [method data_connect], there isn't a [code]to_port[/code], since the "
-"target node can have only one sequence port."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Disconnect two sequence ports previously connected with [method "
-"sequence_connect]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Position the center of the screen for a function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Set the base type of the script."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Position a node on the screen."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Change the default (initial) value of a variable."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Change whether a variable is exported."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid ""
-"Set a variable's info, using the same format as [method get_variable_info]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScript.xml
-msgid "Emitted when the ports of a node are changed."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBasicTypeConstant.xml
-msgid "A Visual Script node representing a constant from the base types."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBasicTypeConstant.xml
-msgid ""
-"A Visual Script node representing a constant from base types, such as "
-"[constant Vector3.AXIS_X]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBasicTypeConstant.xml
-msgid "The type to get the constant from."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBasicTypeConstant.xml
-msgid "The name of the constant to return."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "A Visual Script node used to call built-in functions."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"A built-in function used inside a [VisualScript]. It is usually a math "
-"function or an utility function.\n"
-"See also [@GDScript], for the same functions in the GDScript language."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "The function to be executed."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the sine of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the cosine of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the tangent of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the hyperbolic sine of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the hyperbolic cosine of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the hyperbolic tangent of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the arc sine of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the arc cosine of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the arc tangent of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the arc tangent of the input, using the signs of both parameters to "
-"determine the exact angle."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the square root of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the remainder of one input divided by the other, using floating-point "
-"numbers."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the positive remainder of one input divided by the other, using "
-"floating-point numbers."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the input rounded down."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the input rounded up."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the input rounded to the nearest integer."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the absolute value of the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the sign of the input, turning it into 1, -1, or 0. Useful to "
-"determine if the input is positive or negative."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the input raised to a given power."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the natural logarithm of the input. Note that this is not the typical "
-"base-10 logarithm function calculators use."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the mathematical constant [b]e[/b] raised to the specified power of "
-"the input. [b]e[/b] has an approximate value of 2.71828."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return whether the input is NaN (Not a Number) or not. NaN is usually "
-"produced by dividing 0 by 0, though other ways exist."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return whether the input is an infinite floating-point number or not. "
-"Infinity is usually produced by dividing a number by 0, though other ways "
-"exist."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Easing function, based on exponent. 0 is constant, 1 is linear, 0 to 1 is "
-"ease-in, 1+ is ease out. Negative values are in-out/out in."
-msgstr ""
-"Erleichternde Funktion, basierend auf dem Exponenten. 0 ist konstant, 1 ist "
-"linear, 0 bis 1 ist ease-in, 1+ ist ease-out. Negative Werte sind in-out/out-"
-"in."
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the number of digit places after the decimal that the first non-zero "
-"digit occurs."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the input snapped to a given step."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return a number linearly interpolated between the first two inputs, based on "
-"the third input. Uses the formula [code]a + (a - b) * t[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Moves the number toward a value, based on the third input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the result of [code]value[/code] decreased by [code]step[/code] * "
-"[code]amount[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Randomize the seed (or the internal state) of the random number generator. "
-"Current implementation reseeds using a number based on time."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return a random 32 bits integer value. To obtain a random value between 0 to "
-"N (where N is smaller than 2^32 - 1), you can use it with the remainder "
-"function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return a random floating-point value between 0 and 1. To obtain a random "
-"value between 0 to N, you can use it with multiplication."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return a random floating-point value between the two inputs."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Set the seed for the random number generator."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return a random value from the given seed, along with the new seed."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Convert the input from degrees to radians."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Convert the input from radians to degrees."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Convert the input from linear volume to decibel volume."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Convert the input from decibel volume to linear volume."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the greater of the two numbers, also known as their maximum."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the lesser of the two numbers, also known as their minimum."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the input clamped inside the given range, ensuring the result is "
-"never outside it. Equivalent to [code]min(max(input, range_low), range_high)"
-"[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return the nearest power of 2 to the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Create a [WeakRef] from the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Create a [FuncRef] from the input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Convert between types."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the type of the input as an integer. Check [enum Variant.Type] for "
-"the integers that might be returned."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Checks if a type is registered in the [ClassDB]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Return a character with the given ascii value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Convert the input to a string."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Print the given string to the output window."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Print the given string to the standard error output."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Print the given string to the standard output, without adding a newline."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Serialize a [Variant] to a string."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Deserialize a [Variant] from a string serialized using [constant VAR_TO_STR]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Serialize a [Variant] to a [PoolByteArray]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Deserialize a [Variant] from a [PoolByteArray] serialized using [constant "
-"VAR_TO_BYTES]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return the [Color] with the given name and alpha ranging from 0 to 1.\n"
-"[b]Note:[/b] Names are defined in [code]color_names.inc[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid ""
-"Return a number smoothly interpolated between the first two inputs, based on "
-"the third input. Similar to [constant MATH_LERP], but interpolates faster at "
-"the beginning and slower at the end. Using Hermite interpolation formula:\n"
-"[codeblock]\n"
-"var t = clamp((weight - from) / (to - from), 0.0, 1.0)\n"
-"return t * t * (3.0 - 2.0 * t)\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptBuiltinFunc.xml
-msgid "Represents the size of the [enum BuiltinFunc] enum."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptClassConstant.xml
-msgid "Gets a constant from a given class."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptClassConstant.xml
-msgid ""
-"This node returns a constant from a given class, such as [constant "
-"TYPE_INT]. See the given class' documentation for available constants.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]value[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptClassConstant.xml
-msgid "The constant's parent class."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptClassConstant.xml
-msgid ""
-"The constant to return. See the given class for its available constants."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComment.xml
-msgid "A Visual Script node used to annotate the script."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComment.xml
-msgid ""
-"A Visual Script node used to display annotations in the script, so that code "
-"may be documented.\n"
-"Comment nodes can be resized so they encompass a group of nodes."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComment.xml
-msgid "The text inside the comment node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComment.xml
-msgid "The comment node's size (in pixels)."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComment.xml
-msgid "The comment node's title."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComposeArray.xml
-msgid "A Visual Script Node used to create array from a list of items."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptComposeArray.xml
-msgid ""
-"A Visual Script Node used to compose array from the list of elements "
-"provided with custom in-graph UI hard coded in the VisualScript Editor."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCondition.xml
-msgid "A Visual Script node which branches the flow."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCondition.xml
-msgid ""
-"A Visual Script node that checks a [bool] input port. If [code]true[/code], "
-"it will exit via the \"true\" sequence port. If [code]false[/code], it will "
-"exit via the \"false\" sequence port. After exiting either, it exits via the "
-"\"done\" port. Sequence ports may be left disconnected.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence: [code]if (cond) is[/code]\n"
-"- Data (boolean): [code]cond[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence: [code]true[/code]\n"
-"- Sequence: [code]false[/code]\n"
-"- Sequence: [code]done[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptConstant.xml
-msgid "Gets a contant's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptConstant.xml
-msgid ""
-"This node returns a constant's value.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]get[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptConstant.xml
-msgid "The constant's type."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptConstant.xml
-msgid "The constant's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptConstructor.xml
-msgid "A Visual Script node which calls a base type constructor."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptConstructor.xml
-msgid ""
-"A Visual Script node which calls a base type constructor. It can be used for "
-"type conversion as well."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "A scripted Visual Script node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "A custom Visual Script node which can be scripted in powerful ways."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the node's title."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the node's category."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the count of input value ports."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Return the specified input port's hint. See the [enum @GlobalScope."
-"PropertyHint] hints."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-#, fuzzy
-msgid "Return the specified input port's hint string."
-msgstr "Der angegebene Eingangsschnittstelle liegt außerhalb des Bereichs."
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the specified input port's name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Return the specified input port's type. See the [enum Variant.Type] values."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the amount of output [b]sequence[/b] ports."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the specified [b]sequence[/b] output's name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return the amount of output value ports."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Return the specified output port's hint. See the [enum @GlobalScope."
-"PropertyHint] hints."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-#, fuzzy
-msgid "Return the specified output port's hint string."
-msgstr "Der angegebene Eingangsschnittstelle liegt außerhalb des Bereichs."
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-#, fuzzy
-msgid "Return the specified output port's name."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-#, fuzzy
-msgid ""
-"Return the specified output port's type. See the [enum Variant.Type] values."
-msgstr "Stellt die Größe dar des [enum Variant.Type] enum."
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Return the custom node's text, which is shown right next to the input "
-"[b]sequence[/b] port (if there is none, on the place that is usually taken "
-"by it)."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Return the size of the custom node's working memory. See [method _step] for "
-"more details."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "Return whether the custom node has an input [b]sequence[/b] port."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Execute the custom node's logic, returning the index of the output sequence "
-"port to use or a [String] when there is an error.\n"
-"The [code]inputs[/code] array contains the values of the input ports.\n"
-"[code]outputs[/code] is an array whose indices should be set to the "
-"respective outputs.\n"
-"The [code]start_mode[/code] is usually [constant START_MODE_BEGIN_SEQUENCE], "
-"unless you have used the [code]STEP_*[/code] constants.\n"
-"[code]working_mem[/code] is an array which can be used to persist "
-"information between runs of the custom node. The size needs to be predefined "
-"using [method _get_working_memory_size].\n"
-"When returning, you can mask the returned value with one of the "
-"[code]STEP_*[/code] constants."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid "The start mode used the first time when [method _step] is called."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"The start mode used when [method _step] is called after coming back from a "
-"[constant STEP_PUSH_STACK_BIT]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"The start mode used when [method _step] is called after resuming from "
-"[constant STEP_YIELD_BIT]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Hint used by [method _step] to tell that control should return to it when "
-"there is no other node left to execute.\n"
-"This is used by [VisualScriptCondition] to redirect the sequence to the "
-"\"Done\" port after the [code]true[/code]/[code]false[/code] branch has "
-"finished execution."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Hint used by [method _step] to tell that control should return back, either "
-"hitting a previous [constant STEP_PUSH_STACK_BIT] or exiting the function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Hint used by [method _step] to tell that control should stop and exit the "
-"function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptCustomNode.xml
-msgid ""
-"Hint used by [method _step] to tell that the function should be yielded.\n"
-"Using this requires you to have at least one working memory slot, which is "
-"used for the [VisualScriptFunctionState]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptDeconstruct.xml
-msgid ""
-"A Visual Script node which deconstructs a base type instance into its parts."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptDeconstruct.xml
-msgid "The type to deconstruct."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEditor.xml
-msgid ""
-"Add a custom Visual Script node to the editor. It'll be placed under "
-"\"Custom Nodes\" with the [code]category[/code] as the parameter."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEditor.xml
-msgid ""
-"Remove a custom Visual Script node from the editor. Custom nodes already "
-"placed on scripts won't be removed."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEditor.xml
-msgid "Emitted when a custom Visual Script node is added or removed."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEmitSignal.xml
-msgid "Emits a specified signal."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEmitSignal.xml
-msgid ""
-"Emits a specified signal when it is executed.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence: [code]emit[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEmitSignal.xml
-msgid "The signal to emit."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEngineSingleton.xml
-msgid "A Visual Script node returning a singleton from [@GlobalScope]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptEngineSingleton.xml
-msgid "The singleton's name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptExpression.xml
-msgid "A Visual Script node that can execute a custom expression."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptExpression.xml
-msgid ""
-"A Visual Script node that can execute a custom expression. Values can be "
-"provided for the input and the expression result can be retrieved from the "
-"output."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunction.xml
-msgid "A Visual Script node representing a function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunction.xml
-msgid ""
-"[VisualScriptFunction] represents a function header. It is the starting "
-"point for the function body and can be used to tweak the function's "
-"properties (e.g. RPC mode)."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-#, fuzzy
-msgid "A Visual Script node for calling a function."
-msgstr "Das [VisualScriptEditor] Singleton."
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"[VisualScriptFunctionCall] is created when you add or drag and drop a "
-"function onto the Visual Script graph. It allows to tweak parameters of the "
-"call, e.g. what object the function is called on."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"The script to be used when [member call_mode] is set to [constant "
-"CALL_MODE_INSTANCE]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid ""
-"The base type to be used when [member call_mode] is set to [constant "
-"CALL_MODE_INSTANCE]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"The type to be used when [member call_mode] is set to [constant "
-"CALL_MODE_BASIC_TYPE]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"[code]call_mode[/code] determines the target object on which the method will "
-"be called. See [enum CallMode] for options."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-#, fuzzy
-msgid "The name of the function to be called."
-msgstr ""
-"Der Name der Animation, die beim Laden der Szene abgespielt werden soll."
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid ""
-"The node path to use when [member call_mode] is set to [constant "
-"CALL_MODE_NODE_PATH]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"The mode for RPC calls. See [method Node.rpc] for more details and [enum "
-"RPCCallMode] for available options."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"The singleton to call the method on. Used when [member call_mode] is set to "
-"[constant CALL_MODE_SINGLETON]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"Number of default arguments that will be used when calling the function. "
-"Can't be higher than the number of available default arguments in the "
-"method's declaration."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"If [code]false[/code], call errors (e.g. wrong number of arguments) will be "
-"ignored."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called on this [Object]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called on the given [Node] in the scene tree."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"The method will be called on an instanced node with the given type and "
-"script."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called on a GDScript basic type (e.g. [Vector2])."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called on a singleton."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called locally."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called remotely."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called remotely using an unreliable protocol."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid "The method will be called remotely for the given peer."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionCall.xml
-msgid ""
-"The method will be called remotely for the given peer, using an unreliable "
-"protocol."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionState.xml
-msgid "A Visual Script node representing a function state."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionState.xml
-msgid ""
-"[VisualScriptFunctionState] is returned from [VisualScriptYield] and can be "
-"used to resume a paused function call."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionState.xml
-msgid ""
-"Connects this [VisualScriptFunctionState] to a signal in the given object to "
-"automatically resume when it's emitted."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionState.xml
-#, fuzzy
-msgid "Returns whether the function state is valid."
-msgstr "Gibt das Anfangsnode des übergebenen Übergangs zurück."
-
-#: modules/visual_script/doc_classes/VisualScriptFunctionState.xml
-msgid "Resumes the function to run from the point it was yielded."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptGlobalConstant.xml
-msgid "A Visual Script node returning a constant from [@GlobalScope]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptGlobalConstant.xml
-msgid "The constant to be used."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptIndexGet.xml
-msgid "A Visual Script node for getting a value from an array or a dictionary."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptIndexGet.xml
-msgid ""
-"[VisualScriptIndexGet] will return the value stored in an array or a "
-"dictionary under the given index."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptIndexSet.xml
-msgid "A Visual Script node for setting a value in an array or a dictionary."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptIndexSet.xml
-msgid ""
-"[VisualScriptIndexSet] will set the value stored in an array or a dictionary "
-"under the given index to the provided new value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-msgid "A Visual Script node returning a state of an action."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-msgid ""
-"[VisualScriptInputAction] can be used to check if an action is pressed or "
-"released."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-#, fuzzy
-msgid "Name of the action."
-msgstr "Die letzte Aktion wiederholen."
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-#, fuzzy
-msgid "State of the action to check. See [enum Mode] for options."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-#, fuzzy
-msgid "[code]True[/code] if action is pressed."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-#, fuzzy
-msgid "[code]True[/code] if action is released (i.e. not pressed)."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn gerade eine Animation abgespielt wird."
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-#, fuzzy
-msgid "[code]True[/code] on the frame the action was pressed."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: modules/visual_script/doc_classes/VisualScriptInputAction.xml
-#, fuzzy
-msgid "[code]True[/code] on the frame the action was released."
-msgstr "Wenn [code]true[/code], wird gerade [member animation]] abgespielt."
-
-#: modules/visual_script/doc_classes/VisualScriptIterator.xml
-msgid "Steps through items in a given input."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptIterator.xml
-msgid ""
-"This node steps through each item in a given input. Input can be any "
-"sequence data type, such as an [Array] or [String]. When each item has been "
-"processed, execution passed out the [code]exit[/code] Sequence port.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence: [code]for (elem) in (input)[/code]\n"
-"- Data (variant): [code]input[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence: [code]each[/code]\n"
-"- Sequence: [code]exit[/code]\n"
-"- Data (variant): [code]elem[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-msgid "A Visual Script virtual class for in-graph editable nodes."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-msgid ""
-"A Visual Script virtual class that defines the shape and the default "
-"behavior of the nodes that have to be in-graph editable nodes."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-msgid "Adds an input port to the Visual Script node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-msgid "Adds an output port to the Visual Script node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-#, fuzzy
-msgid "Removes an input port from the Visual Script node."
-msgstr "Entfernt das Element der Arrays dessen Position übergeben wurde."
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-#, fuzzy
-msgid "Removes an output port from the Visual Script node."
-msgstr "Entfernt das Element der Arrays dessen Position übergeben wurde."
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-#, fuzzy
-msgid "Sets the name of an input port."
-msgstr "Ruft den Namen eines Eingangs nach Index ab."
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-#, fuzzy
-msgid "Sets the type of an input port."
-msgstr "Ruft den Typ einer Spur ab."
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-#, fuzzy
-msgid "Sets the name of an output port."
-msgstr "Ruft den Namen eines Eingangs nach Index ab."
-
-#: modules/visual_script/doc_classes/VisualScriptLists.xml
-#, fuzzy
-msgid "Sets the type of an output port."
-msgstr "Ruft den Typ einer Spur ab."
-
-#: modules/visual_script/doc_classes/VisualScriptLocalVar.xml
-msgid "Gets a local variable's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLocalVar.xml
-msgid ""
-"Returns a local variable's value. \"Var Name\" must be supplied, with an "
-"optional type.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]get[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLocalVar.xml
-#: modules/visual_script/doc_classes/VisualScriptLocalVarSet.xml
-msgid "The local variable's type."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLocalVar.xml
-#: modules/visual_script/doc_classes/VisualScriptLocalVarSet.xml
-msgid "The local variable's name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLocalVarSet.xml
-msgid "Changes a local variable's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptLocalVarSet.xml
-msgid ""
-"Changes a local variable's value to the given input. The new value is also "
-"provided on an output Data port.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence\n"
-"- Data (variant): [code]set[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence\n"
-"- Data (variant): [code]get[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Commonly used mathematical constants."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid ""
-"Provides common math constants, such as Pi, on an output Data port.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]get[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "The math constant."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Unity: [code]1[/code]."
-msgstr "Unity: [code]1[/code]."
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Pi: [code]3.141593[/code]."
-msgstr "Pi: [code]3.141593[/code]."
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Pi divided by two: [code]1.570796[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Tau: [code]6.283185[/code]."
-msgstr "τ: [code]6.283185[/code]."
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid ""
-"Mathematical constant [code]e[/code], the natural log base: [code]2.718282[/"
-"code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Square root of two: [code]1.414214[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Infinity: [code]inf[/code]."
-msgstr "Unendlichkeit: [code]inf[/code]."
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Not a number: [code]nan[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptMathConstant.xml
-msgid "Represents the size of the [enum MathConstant] enum."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid "A node which is part of a [VisualScript]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid ""
-"A node which is part of a [VisualScript]. Not to be confused with [Node], "
-"which is a part of a [SceneTree]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid ""
-"Returns the default value of a given port. The default value is used when "
-"nothing is connected to the port."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid "Returns the [VisualScript] instance the node is bound to."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid ""
-"Notify that the node's ports have changed. Usually used in conjunction with "
-"[VisualScriptCustomNode] ."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid "Change the default value of a given port."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptNode.xml
-msgid "Emitted when the available input/output ports are changed."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptOperator.xml
-msgid "A Visual Script node that performs an operation on two values."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptOperator.xml
-msgid ""
-"[b]Input Ports:[/b]\n"
-"- Data (variant): [code]A[/code]\n"
-"- Data (variant): [code]B[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]result[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptOperator.xml
-#, fuzzy
-msgid ""
-"The operation to be performed. See [enum Variant.Operator] for available "
-"options."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: modules/visual_script/doc_classes/VisualScriptOperator.xml
-#, fuzzy
-msgid ""
-"The type of the values for this operation. See [enum Variant.Type] for "
-"available options."
-msgstr ""
-"Der Prozessmodus dieses [AnimationTree]. Siehe [enum AnimationProcessMode] "
-"für verfügbare Modi."
-
-#: modules/visual_script/doc_classes/VisualScriptPreload.xml
-msgid "Creates a new [Resource] or loads one from the filesystem."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPreload.xml
-msgid ""
-"Creates a new [Resource] or loads one from the filesystem.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (object): [code]res[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPreload.xml
-msgid "The [Resource] to load."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid "A Visual Script node returning a value of a property from an [Object]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid ""
-"[VisualScriptPropertyGet] can return a value of any property from the "
-"current object or other objects."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The script to be used when [member set_mode] is set to [constant "
-"CALL_MODE_INSTANCE]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The base type to be used when [member set_mode] is set to [constant "
-"CALL_MODE_INSTANCE]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The type to be used when [member set_mode] is set to [constant "
-"CALL_MODE_BASIC_TYPE]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid ""
-"The indexed name of the property to retrieve. See [method Object."
-"get_indexed] for details."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The node path to use when [member set_mode] is set to [constant "
-"CALL_MODE_NODE_PATH]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid ""
-"The name of the property to retrieve. Changing this will clear [member "
-"index]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid ""
-"[code]set_mode[/code] determines the target object from which the property "
-"will be retrieved. See [enum CallMode] for options."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid "The property will be retrieved from this [Object]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-#, fuzzy
-msgid "The property will be retrieved from the given [Node] in the scene tree."
-msgstr ""
-"Die Eigenschaft wird serialisiert und in der Szenendatei gespeichert "
-"(Standard)."
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid ""
-"The property will be retrieved from an instanced node with the given type "
-"and script."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertyGet.xml
-msgid ""
-"The property will be retrieved from a GDScript basic type (e.g. [Vector2])."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid "A Visual Script node that sets a property of an [Object]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"[VisualScriptPropertySet] can set the value of any property from the current "
-"object or other objects."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-#, fuzzy
-msgid ""
-"The additional operation to perform when assigning. See [enum AssignOp] for "
-"options."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The indexed name of the property to set. See [method Object.set_indexed] for "
-"details."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The name of the property to set. Changing this will clear [member index]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"[code]set_mode[/code] determines the target object on which the property "
-"will be set. See [enum CallMode] for options."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-#, fuzzy
-msgid "The property will be set on this [Object]."
-msgstr "Die Eigenschaft wird im Editor-Inspektor überprüft."
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-#, fuzzy
-msgid "The property will be set on the given [Node] in the scene tree."
-msgstr ""
-"Die Eigenschaft wird serialisiert und in der Szenendatei gespeichert "
-"(Standard)."
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The property will be set on an instanced node with the given type and script."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid "The property will be set on a GDScript basic type (e.g. [Vector2])."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid "The property will be assigned regularly."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The value will be added to the property. Equivalent of doing [code]+=[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The value will be subtracted from the property. Equivalent of doing [code]-"
-"=[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The property will be multiplied by the value. Equivalent of doing [code]*=[/"
-"code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The property will be divided by the value. Equivalent of doing [code]/=[/"
-"code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"A modulo operation will be performed on the property and the value. "
-"Equivalent of doing [code]%=[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The property will be binarly shifted to the left by the given value. "
-"Equivalent of doing [code]<<[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"The property will be binarly shifted to the right by the given value. "
-"Equivalent of doing [code]>>[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"A binary [code]AND[/code] operation will be performed on the property. "
-"Equivalent of doing [code]&=[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"A binary [code]OR[/code] operation will be performed on the property. "
-"Equivalent of doing [code]|=[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptPropertySet.xml
-msgid ""
-"A binary [code]XOR[/code] operation will be performed on the property. "
-"Equivalent of doing [code]^=[/code]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptReturn.xml
-msgid "Exits a function and returns an optional value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptReturn.xml
-msgid ""
-"Ends the execution of a function and returns control to the calling "
-"function. Optionally, it can return a [Variant] value.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence\n"
-"- Data (variant): [code]result[/code] (optional)\n"
-"[b]Output Ports:[/b]\n"
-"none"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptReturn.xml
-msgid "If [code]true[/code], the [code]return[/code] input port is available."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptReturn.xml
-msgid "The return value's data type."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSceneNode.xml
-msgid "Node reference."
-msgstr "Node-Referenz."
-
-#: modules/visual_script/doc_classes/VisualScriptSceneNode.xml
-msgid ""
-"A direct reference to a node.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data: [code]node[/code] (obj)"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSceneNode.xml
-msgid "The node's path in the scene tree."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSceneTree.xml
-msgid "A Visual Script node for accessing [SceneTree] methods."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSelect.xml
-msgid "Chooses between two input values."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSelect.xml
-msgid ""
-"Chooses between two input values based on a Boolean condition.\n"
-"[b]Input Ports:[/b]\n"
-"- Data (boolean): [code]cond[/code]\n"
-"- Data (variant): [code]a[/code]\n"
-"- Data (variant): [code]b[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]out[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSelect.xml
-msgid "The input variables' type."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSelf.xml
-msgid "Outputs a reference to the current instance."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSelf.xml
-msgid ""
-"Provides a reference to the node running the visual script.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (object): [code]instance[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSequence.xml
-msgid "Executes a series of Sequence ports."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSequence.xml
-msgid ""
-"Steps through a series of one or more output Sequence ports. The "
-"[code]current[/code] data port outputs the currently executing item.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence: [code]in order[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence: [code]1[/code]\n"
-"- Sequence: [code]2 - n[/code] (optional)\n"
-"- Data (int): [code]current[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSequence.xml
-msgid "The number of steps in the sequence."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSubCall.xml
-msgid "Calls a method called [code]_subcall[/code] in this object."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSubCall.xml
-msgid ""
-"[VisualScriptSubCall] will call method named [code]_subcall[/code] in the "
-"current script. It will fail if the method doesn't exist or the provided "
-"arguments are wrong."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSubCall.xml
-msgid "Called by this node."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSwitch.xml
-msgid "Branches program flow based on a given input's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptSwitch.xml
-msgid ""
-"Branches the flow based on an input's value. Use [b]Case Count[/b] in the "
-"Inspector to set the number of branches and each comparison's optional "
-"type.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence: [code]'input' is[/code]\n"
-"- Data (variant): [code]=[/code]\n"
-"- Data (variant): [code]=[/code] (optional)\n"
-"- Data (variant): [code]input[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence\n"
-"- Sequence (optional)\n"
-"- Sequence: [code]done[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptTypeCast.xml
-msgid "A Visual Script node that casts the given value to another type."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptTypeCast.xml
-msgid ""
-"[VisualScriptTypeCast] will perform a type conversion to an [Object]-derived "
-"type."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptTypeCast.xml
-msgid ""
-"The target script class to be converted to. If none, only the [member "
-"base_type] will be used."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptTypeCast.xml
-msgid "The target type to be converted to."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptVariableGet.xml
-msgid "Gets a variable's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptVariableGet.xml
-msgid ""
-"Returns a variable's value. \"Var Name\" must be supplied, with an optional "
-"type.\n"
-"[b]Input Ports:[/b]\n"
-"none\n"
-"[b]Output Ports:[/b]\n"
-"- Data (variant): [code]value[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptVariableGet.xml
-#: modules/visual_script/doc_classes/VisualScriptVariableSet.xml
-msgid "The variable's name."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptVariableSet.xml
-msgid "Changes a variable's value."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptVariableSet.xml
-msgid ""
-"Changes a variable's value to the given input.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence\n"
-"- Data (variant): [code]set[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptWhile.xml
-msgid "Conditional loop."
-msgstr "Bedingte Wiederholung."
-
-#: modules/visual_script/doc_classes/VisualScriptWhile.xml
-msgid ""
-"Loops while a condition is [code]true[/code]. Execution continues out the "
-"[code]exit[/code] Sequence port when the loop terminates.\n"
-"[b]Input Ports:[/b]\n"
-"- Sequence: [code]while(cond)[/code]\n"
-"- Data (bool): [code]cond[/code]\n"
-"[b]Output Ports:[/b]\n"
-"- Sequence: [code]repeat[/code]\n"
-"- Sequence: [code]exit[/code]"
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-msgid "A Visual Script node used to pause a function execution."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-msgid ""
-"[VisualScriptYield] will pause the function call and return "
-"[VisualScriptFunctionState], which can be used to resume the function."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-#, fuzzy
-msgid ""
-"The mode to use for yielding. See [enum YieldMode] for available options."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-msgid "The time to wait when [member mode] is set to [constant YIELD_WAIT]."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-msgid "Yields during an idle frame."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-msgid "Yields during a physics frame."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYield.xml
-#, fuzzy
-msgid "Yields a function and waits the given time."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid "A Visual Script node yielding for a signal."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid ""
-"[VisualScriptYieldSignal] will pause the function execution until the "
-"provided signal is emitted."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid ""
-"[code]call_mode[/code] determines the target object to wait for the signal "
-"emission. See [enum CallMode] for options."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid "The signal name to be waited for."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid "A signal from this [Object] will be used."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid "A signal from the given [Node] in the scene tree will be used."
-msgstr ""
-
-#: modules/visual_script/doc_classes/VisualScriptYieldSignal.xml
-msgid "A signal from an instanced node with the given type will be used."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Server for anything visible."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Server for anything visible. The visual server is the API backend for "
-"everything visible. The whole scene system mounts on it to display.\n"
-"The visual server is completely opaque, the internals are entirely "
-"implementation specific and cannot be accessed.\n"
-"The visual server can be used to bypass the scene system entirely.\n"
-"Resources are created using the [code]*_create[/code] functions.\n"
-"All objects are drawn to a viewport. You can use the [Viewport] attached to "
-"the [SceneTree] or you can create one yourself with [method "
-"viewport_create]. When using a custom scenario or canvas, the scenario or "
-"canvas needs to be attached to the viewport using [method "
-"viewport_set_scenario] or [method viewport_attach_canvas].\n"
-"In 3D, all visual objects must be associated with a scenario. The scenario "
-"is a visual representation of the world. If accessing the visual server from "
-"a running game, the scenario can be accessed from the scene tree from any "
-"[Spatial] node with [method Spatial.get_world]. Otherwise, a scenario can be "
-"created with [method scenario_create].\n"
-"Similarly, in 2D, a canvas is needed to draw all canvas items.\n"
-"In 3D, all visible objects are comprised of a resource and an instance. A "
-"resource can be a mesh, a particle system, a light, or any other 3D object. "
-"In order to be visible resources must be attached to an instance using "
-"[method instance_set_base]. The instance must also be attached to the "
-"scenario using [method instance_set_scenario] in order to be visible.\n"
-"In 2D, all visible objects are some form of canvas item. In order to be "
-"visible, a canvas item needs to be the child of a canvas attached to a "
-"viewport, or it needs to be the child of another canvas item that is "
-"eventually attached to the canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets images to be rendered in the window margin."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets margin size, where black bars (or images, if [method "
-"black_bars_set_images] was used) are rendered."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a camera and adds it to the VisualServer. It can be accessed with "
-"the RID that is returned. This RID will be used in all [code]camera_*[/code] "
-"VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the cull mask associated with this camera. The cull mask describes "
-"which 3D layers are rendered by this camera. Equivalent to [member Camera."
-"cull_mask]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the environment used by this camera. Equivalent to [member Camera."
-"environment]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets camera to use frustum projection. This mode allows adjusting the "
-"[code]offset[/code] argument to create \"tilted frustum\" effects."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets camera to use orthogonal projection, also known as orthographic "
-"projection. Objects remain the same size on the screen no matter how far "
-"away they are."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets camera to use perspective projection. Objects on the screen becomes "
-"smaller when they are far away."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets [Transform] of camera."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], preserves the horizontal aspect ratio which is "
-"equivalent to [constant Camera.KEEP_WIDTH]. If [code]false[/code], preserves "
-"the vertical aspect ratio which is equivalent to [constant Camera."
-"KEEP_HEIGHT]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a canvas and returns the assigned [RID]. It can be accessed with the "
-"RID that is returned. This RID will be used in all [code]canvas_*[/code] "
-"VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a circle command to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid ""
-"If ignore is [code]true[/code], the VisualServer does not perform clipping."
-msgstr "Wenn [code]true[/code], wird der [AnimationTree] verarbeitet."
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a line command to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a mesh command to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds a [MultiMesh] to the [CanvasItem]'s draw commands. Only affects its "
-"aabb at the moment."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds a nine patch image to the [CanvasItem]'s draw commands.\n"
-"See [NinePatchRect] for more explanation."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a particle system to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a polygon to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds a polyline, which is a line from multiple points with a width, to the "
-"[CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a primitive to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a rectangle to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds a [Transform2D] command to the [CanvasItem]'s draw commands.\n"
-"This sets the extra_matrix uniform when executed. This affects the later "
-"commands of the canvas item."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a textured rect to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds a texture rect with region setting to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds a triangle array to the [CanvasItem]'s draw commands."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Clears the [CanvasItem] and removes all commands in it."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a new [CanvasItem] and returns its [RID]. It can be accessed with "
-"the RID that is returned. This RID will be used in all [code]canvas_item_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Sets clipping for the [CanvasItem]."
-msgstr "Ein Material für [CanvasItem]."
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the [CanvasItem] to copy a rect to the backbuffer."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Defines a custom drawing rectangle for the [CanvasItem]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Enables the use of distance fields for GUI elements that are rendering "
-"distance field based fonts."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets [CanvasItem] to be drawn behind its parent."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the index for the [CanvasItem]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"The light mask. See [LightOccluder2D] for more information on light masks."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a new material to the [CanvasItem]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the color that modulates the [CanvasItem] and its children."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the parent for the [CanvasItem]. The parent can be another canvas item, "
-"or it can be the root canvas that is attached to the viewport."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the color that modulates the [CanvasItem] without children."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets if [CanvasItem]'s children should be sorted by y-position."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the [CanvasItem]'s [Transform2D]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets if the [CanvasItem] uses its parent's material."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets if the canvas item (including its children) is visible."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If this is enabled, the Z index of the parent will be added to the "
-"children's Z index."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [CanvasItem]'s Z index, i.e. its draw order (lower indexes are "
-"drawn first)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Attaches the canvas light to the canvas. Removes it from its previous canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a canvas light and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID will be used in all "
-"[code]canvas_light_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Attaches a light occluder to the canvas. Removes it from its previous canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a light occluder and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID will be used in all "
-"[code]canvas_light_ocluder_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Enables or disables light occluder."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a light occluder's polygon."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a light occluder's [Transform2D]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the color for a light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Enables or disables a canvas light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a canvas light's energy."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a canvas light's height."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"The binary mask used to determine which layers this canvas light's shadows "
-"affects. See [LightOccluder2D] for more information on light masks."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The layer range that gets rendered with this light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The mode of the light, see [enum CanvasLightMode] constants."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the texture's scale factor of the light. Equivalent to [member Light2D."
-"texture_scale]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the width of the shadow buffer, size gets scaled to the next power of "
-"two for this."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the color of the canvas light's shadow."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Enables or disables the canvas light's shadow."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the canvas light's shadow's filter, see [enum CanvasLightShadowFilter] "
-"constants."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Sets the length of the shadow's gradient."
-msgstr "Liefert die Länge des Audio Streams in Sekunden zurück."
-
-#: doc/classes/VisualServer.xml
-msgid "Smoothens the shadow. The lower, the smoother."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets texture to be used by light. Equivalent to [member Light2D.texture]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the offset of the light's texture. Equivalent to [member Light2D."
-"offset]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the canvas light's [Transform2D]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the Z range of objects that will be affected by this light. Equivalent "
-"to [member Light2D.range_z_min] and [member Light2D.range_z_max]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a new light occluder polygon and adds it to the VisualServer. It can "
-"be accessed with the RID that is returned. This RID will be used in all "
-"[code]canvas_occluder_polygon_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets an occluder polygons cull mode. See [enum "
-"CanvasOccluderPolygonCullMode] constants."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the shape of the occluder polygon."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the shape of the occluder polygon as lines."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"A copy of the canvas item will be drawn with a local offset of the mirroring "
-"[Vector2]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Modulates all colors in the given canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a directional light and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID can be used in most "
-"[code]light_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this directional light to an instance using "
-"[method instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Draws a frame. [i]This method is deprecated[/i], please use [method "
-"force_draw] instead."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an environment and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID will be used in all "
-"[code]environment_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the values to be used with the \"Adjustment\" post-process effect. See "
-"[Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the ambient light parameters. See [Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [i]BGMode[/i] of the environment. Equivalent to [member Environment."
-"background_mode]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Color displayed for clear areas of the scene (if using Custom color or "
-"Color+Sky background modes)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the intensity of the background color."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the maximum layer to use if using Canvas background mode."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the values to be used with the \"DoF Far Blur\" post-process effect. "
-"See [Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the values to be used with the \"DoF Near Blur\" post-process effect. "
-"See [Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the scene fog. See [Environment] for more "
-"details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the fog depth effect. See [Environment] "
-"for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the fog height effect. See [Environment] "
-"for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the \"glow\" post-process effect. See "
-"[Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [Sky] to be used as the environment's background when using "
-"[i]BGMode[/i] sky. Equivalent to [member Environment.background_sky]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a custom field of view for the background [Sky]. Equivalent to [member "
-"Environment.background_sky_custom_fov]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the rotation of the background [Sky] expressed as a [Basis]. Equivalent "
-"to [member Environment.background_sky_orientation]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the \"Screen Space Ambient Occlusion "
-"(SSAO)\" post-process effect. See [Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the \"screen space reflections\" post-"
-"process effect. See [Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the variables to be used with the \"tonemap\" post-process effect. See "
-"[Environment] for more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Removes buffers and clears testcubes."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Forces a frame to be drawn when the function is called. Drawing a frame "
-"updates all [Viewport]s that are set to update. Use with extreme caution."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Synchronizes threads."
-msgstr "Synchronisiert Threads."
-
-#: doc/classes/VisualServer.xml
-msgid "Tries to free an object in the VisualServer."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a certain information, see [enum RenderInfo] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the id of the test cube. Creates one if none exists."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the id of the test texture. Creates one if none exists."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the name of the video adapter (e.g. \"GeForce GTX 1080/PCIe/"
-"SSE2\").\n"
-"[b]Note:[/b] When running a headless or server binary, this function returns "
-"an empty string."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the vendor of the video adapter (e.g. \"NVIDIA Corporation\").\n"
-"[b]Note:[/b] When running a headless or server binary, this function returns "
-"an empty string."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the id of a white texture. Creates one if none exists."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a GI probe and adds it to the VisualServer. It can be accessed with "
-"the RID that is returned. This RID will be used in all [code]gi_probe_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this GI probe to an instance using [method "
-"instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the bias value for the GI probe. Bias is used to avoid self "
-"occlusion. Equivalent to [member GIProbeData.bias]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the axis-aligned bounding box that covers the full extent of the GI "
-"probe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the cell size set by [method gi_probe_set_cell_size]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the data used by the GI probe."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid ""
-"Returns the dynamic range set for this GI probe. Equivalent to [member "
-"GIProbe.dynamic_range]."
-msgstr ""
-"Gibt die minimale Größe dieses Controls zurück. Siehe [member rect_min_size]."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the energy multiplier for this GI probe. Equivalent to [member "
-"GIProbe.energy]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid ""
-"Returns the normal bias for this GI probe. Equivalent to [member GIProbe."
-"normal_bias]."
-msgstr ""
-"Gibt die minimale Größe dieses Controls zurück. Siehe [member rect_min_size]."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the propagation value for this GI probe. Equivalent to [member "
-"GIProbe.propagation]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the Transform set by [method gi_probe_set_to_cell_xform]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns [code]true[/code] if the GI probe data associated with this GI probe "
-"is compressed. Equivalent to [member GIProbe.compress]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns [code]true[/code] if the GI probe is set to interior, meaning it "
-"does not account for sky light. Equivalent to [member GIProbe.interior]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the bias value to avoid self-occlusion. Equivalent to [member GIProbe."
-"bias]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the axis-aligned bounding box that covers the extent of the GI probe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the size of individual cells within the GI probe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the compression setting for the GI probe data. Compressed data will "
-"take up less space but may look worse. Equivalent to [member GIProbe."
-"compress]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the data to be used in the GI probe for lighting calculations. Normally "
-"this is created and called internally within the [GIProbe] node. You should "
-"not try to set this yourself."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the dynamic range of the GI probe. Dynamic range sets the limit for how "
-"bright lights can be. A smaller range captures greater detail but limits how "
-"bright lights can be. Equivalent to [member GIProbe.dynamic_range]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the energy multiplier for this GI probe. A higher energy makes the "
-"indirect light from the GI probe brighter. Equivalent to [member GIProbe."
-"energy]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the interior value of this GI probe. A GI probe set to interior does "
-"not include the sky when calculating lighting. Equivalent to [member GIProbe."
-"interior]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the normal bias for this GI probe. Normal bias behaves similar to the "
-"other form of bias and may help reduce self-occlusion. Equivalent to [member "
-"GIProbe.normal_bias]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the propagation of light within this GI probe. Equivalent to [member "
-"GIProbe.propagation]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the to cell [Transform] for this GI probe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns [code]true[/code] if changes have been made to the VisualServer's "
-"data. [method draw] is usually called if this happens.\n"
-"As changes are registered as either high or low priority (e.g. dynamic "
-"shaders), this function takes an optional argument to query either low or "
-"high priority changes, or any changes."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Not yet implemented. Always returns [code]false[/code]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns [code]true[/code] if the OS supports a certain feature. Features "
-"might be [code]s3tc[/code], [code]etc[/code], [code]etc2[/code], "
-"[code]pvrtc[/code] and [code]skinning_fallback[/code].\n"
-"When rendering with GLES2, returns [code]true[/code] with "
-"[code]skinning_fallback[/code] in case the hardware doesn't support the "
-"default GPU skinning process."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets up [ImmediateGeometry] internals to prepare for drawing. Equivalent to "
-"[method ImmediateGeometry.begin]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Clears everything that was set up between [method immediate_begin] and "
-"[method immediate_end]. Equivalent to [method ImmediateGeometry.clear]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the color to be used with next vertex. Equivalent to [method "
-"ImmediateGeometry.set_color]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an immediate geometry and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]immediate_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this immediate geometry to an instance using "
-"[method instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Ends drawing the [ImmediateGeometry] and displays it. Equivalent to [method "
-"ImmediateGeometry.end]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the material assigned to the [ImmediateGeometry]."
-msgstr "Gibt den Arkussinus des Parameters zurück."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the normal to be used with next vertex. Equivalent to [method "
-"ImmediateGeometry.set_normal]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the material to be used to draw the [ImmediateGeometry]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the tangent to be used with next vertex. Equivalent to [method "
-"ImmediateGeometry.set_tangent]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the UV to be used with next vertex. Equivalent to [method "
-"ImmediateGeometry.set_uv]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the UV2 to be used with next vertex. Equivalent to [method "
-"ImmediateGeometry.set_uv2]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds the next vertex using the information provided in advance. Equivalent "
-"to [method ImmediateGeometry.add_vertex]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds the next vertex using the information provided in advance. This is a "
-"helper class that calls [method immediate_vertex] under the hood. Equivalent "
-"to [method ImmediateGeometry.add_vertex]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Initializes the visual server. This function is called internally by "
-"platform-dependent code during engine initialization. If called from a "
-"running game, it will not do anything."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Attaches a unique Object ID to instance. Object ID must be attached to "
-"instance for proper culling with [method instances_cull_aabb], [method "
-"instances_cull_convex], and [method instances_cull_ray]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Attaches a skeleton to an instance. Removes the previous skeleton from the "
-"instance."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a visual instance and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]instance_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"An instance is a way of placing a 3D object in the scenario. Objects like "
-"particles, meshes, and reflection probes need to be associated with an "
-"instance to be visible in the scenario using [method instance_set_base]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a visual instance, adds it to the VisualServer, and sets both base "
-"and scenario. It can be accessed with the RID that is returned. This RID "
-"will be used in all [code]instance_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Not implemented in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the shadow casting setting to one of [enum ShadowCastingSetting]. "
-"Equivalent to [member GeometryInstance.cast_shadow]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the flag for a given [enum InstanceFlags]. See [enum InstanceFlags] for "
-"more details."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a material that will be rendered for all surfaces on top of active "
-"materials for the mesh associated with this instance. Equivalent to [member "
-"GeometryInstance.material_overlay]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a material that will override the material for all surfaces on the mesh "
-"associated with this instance. Equivalent to [member GeometryInstance."
-"material_override]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the base of the instance. A base can be any of the 3D objects that are "
-"created in the VisualServer that can be displayed. For example, any of the "
-"light types, mesh, multimesh, immediate geometry, particle system, "
-"reflection probe, lightmap capture, and the GI probe are all types that can "
-"be set as the base of an instance in order to be displayed in the scenario."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the weight for a given blend shape associated with this instance."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a custom AABB to use when culling objects from the view frustum. "
-"Equivalent to [method GeometryInstance.set_custom_aabb]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Function not implemented in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a margin to increase the size of the AABB when culling objects from the "
-"view frustum. This allows you to avoid culling objects that fall outside the "
-"view frustum. Equivalent to [member GeometryInstance.extra_cull_margin]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the render layers that this instance will be drawn to. Equivalent to "
-"[member VisualInstance.layers]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the scenario that the instance is in. The scenario is the 3D world that "
-"the objects will be displayed in."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the material of a specific surface. Equivalent to [method MeshInstance."
-"set_surface_material]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the world space transform of the instance. Equivalent to [member "
-"Spatial.transform]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Sets the lightmap to use with this instance."
-msgstr "Gibt das AnimationNode mit dem gegebenen Namen zurück."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets whether an instance is drawn or not. Equivalent to [member Spatial."
-"visible]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns an array of object IDs intersecting with the provided AABB. Only "
-"visual 3D nodes are considered, such as [MeshInstance] or "
-"[DirectionalLight]. Use [method @GDScript.instance_from_id] to obtain the "
-"actual nodes. A scenario RID must be provided, which is available in the "
-"[World] you want to query. This forces an update for all resources queued to "
-"update.\n"
-"[b]Warning:[/b] This function is primarily intended for editor usage. For in-"
-"game use cases, prefer physics collision."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns an array of object IDs intersecting with the provided convex shape. "
-"Only visual 3D nodes are considered, such as [MeshInstance] or "
-"[DirectionalLight]. Use [method @GDScript.instance_from_id] to obtain the "
-"actual nodes. A scenario RID must be provided, which is available in the "
-"[World] you want to query. This forces an update for all resources queued to "
-"update.\n"
-"[b]Warning:[/b] This function is primarily intended for editor usage. For in-"
-"game use cases, prefer physics collision."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns an array of object IDs intersecting with the provided 3D ray. Only "
-"visual 3D nodes are considered, such as [MeshInstance] or "
-"[DirectionalLight]. Use [method @GDScript.instance_from_id] to obtain the "
-"actual nodes. A scenario RID must be provided, which is available in the "
-"[World] you want to query. This forces an update for all resources queued to "
-"update.\n"
-"[b]Warning:[/b] This function is primarily intended for editor usage. For in-"
-"game use cases, prefer physics collision."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], this directional light will blend between shadow map "
-"splits resulting in a smoother transition between them. Equivalent to "
-"[member DirectionalLight.directional_shadow_blend_splits]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the shadow depth range mode for this directional light. Equivalent to "
-"[member DirectionalLight.directional_shadow_depth_range]. See [enum "
-"LightDirectionalShadowDepthRangeMode] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the shadow mode for this directional light. Equivalent to [member "
-"DirectionalLight.directional_shadow_mode]. See [enum "
-"LightDirectionalShadowMode] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets whether to use vertical or horizontal detail for this omni light. This "
-"can be used to alleviate artifacts in the shadow map. Equivalent to [member "
-"OmniLight.omni_shadow_detail]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets whether to use a dual paraboloid or a cubemap for the shadow map. Dual "
-"paraboloid is faster but may suffer from artifacts. Equivalent to [member "
-"OmniLight.omni_shadow_mode]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the bake mode for this light, see [enum LightBakeMode] for options. The "
-"bake mode affects how the light will be baked in [BakedLightmap]s and "
-"[GIProbe]s."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the color of the light. Equivalent to [member Light.light_color]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the cull mask for this Light. Lights only affect objects in the "
-"selected layers. Equivalent to [member Light.light_cull_mask]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], light will subtract light instead of adding light. "
-"Equivalent to [member Light.light_negative]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the specified light parameter. See [enum LightParam] for options. "
-"Equivalent to [method Light.set_param]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], reverses the backface culling of the mesh. This can be "
-"useful when you have a flat mesh that has a light behind it. If you need to "
-"cast a shadow on both sides of the mesh, set the mesh to use double sided "
-"shadows with [method instance_geometry_set_cast_shadows_setting]. Equivalent "
-"to [member Light.shadow_reverse_cull_face]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], light will cast shadows. Equivalent to [member Light."
-"shadow_enabled]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the color of the shadow cast by the light. Equivalent to [member Light."
-"shadow_color]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets whether GI probes capture light information from this light. "
-"[i]Deprecated method.[/i] Use [method light_set_bake_mode] instead. This "
-"method is only kept for compatibility reasons and calls [method "
-"light_set_bake_mode] internally, setting the bake mode to [constant "
-"LIGHT_BAKE_DISABLED] or [constant LIGHT_BAKE_INDIRECT] depending on the "
-"given parameter."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a lightmap capture and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]lightmap_capture_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this lightmap capture to an instance using "
-"[method instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the size of the lightmap capture area."
-msgstr "Gibt die Größe des Arrays zurück."
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the energy multiplier used by the lightmap capture."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the octree used by the lightmap capture."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the cell subdivision amount used by this lightmap capture's octree."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the cell transform for this lightmap capture's octree."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns [code]true[/code] if capture is in \"interior\" mode."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn der Graph das übergebene Node enthält."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the size of the area covered by the lightmap capture. Equivalent to "
-"[member BakedLightmapData.bounds]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the energy multiplier for this lightmap capture. Equivalent to [member "
-"BakedLightmapData.energy]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the \"interior\" mode for this lightmap capture. Equivalent to [member "
-"BakedLightmapData.interior]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the octree to be used by this lightmap capture. This function is "
-"normally used by the [BakedLightmap] node. Equivalent to [member "
-"BakedLightmapData.octree]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the subdivision level of this lightmap capture's octree. Equivalent to "
-"[member BakedLightmapData.cell_subdiv]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the octree cell transform for this lightmap capture's octree. "
-"Equivalent to [member BakedLightmapData.cell_space_transform]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns a mesh of a sphere with the given amount of horizontal and vertical "
-"subdivisions."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an empty material and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]material_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the value of a certain material's parameter."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid ""
-"Returns the default value for the param if available. Returns [code]null[/"
-"code] otherwise."
-msgstr ""
-"Gibt [code]true[/code] zurück wenn dieser Bereich vollendet ist, ansonsten "
-"[code]false[/code]."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the shader of a certain material's shader. Returns an empty RID if "
-"the material doesn't have a shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a material's line width."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets an object's next material."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a material's parameter."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a material's render priority."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a shader material's shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Adds a surface generated from the Arrays to a mesh. See [enum PrimitiveType] "
-"constants for types."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Removes all surfaces from a mesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a new mesh and adds it to the VisualServer. It can be accessed with "
-"the RID that is returned. This RID will be used in all [code]mesh_*[/code] "
-"VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this mesh to an instance using [method "
-"instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's blend shape count."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's blend shape mode."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's custom aabb."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's number of surfaces."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Removes a mesh's surface."
-msgstr "Entfernt ein Unternode."
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a mesh's blend shape count."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a mesh's blend shape mode."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a mesh's custom aabb."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's aabb."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's vertex buffer."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's amount of indices."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's amount of vertices."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's buffer arrays."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's arrays for blend shapes."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the format of a mesh's surface."
-msgstr "Gibt den Methodennamen einer Methodenspur zurück."
-
-#: doc/classes/VisualServer.xml
-msgid "Function is unused in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's index buffer."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a mesh's surface's material."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the primitive type of a mesh's surface."
-msgstr "Gibt den Methodennamen einer Methodenspur zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the aabb of a mesh's surface's skeleton."
-msgstr "Gibt den Methodennamen einer Methodenspur zurück."
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a mesh's surface's material."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Updates a specific region of a vertex buffer for the specified surface. "
-"Warning: this function alters the vertex buffer directly with no safety "
-"mechanisms, you can easily corrupt your mesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Allocates space for the multimesh data. Format parameters determine how the "
-"data will be stored by OpenGL. See [enum MultimeshTransformFormat], [enum "
-"MultimeshColorFormat], and [enum MultimeshCustomDataFormat] for usage. "
-"Equivalent to [member MultiMesh.instance_count]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a new multimesh on the VisualServer and returns an [RID] handle. "
-"This RID will be used in all [code]multimesh_*[/code] VisualServer "
-"functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this multimesh to an instance using [method "
-"instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Calculates and returns the axis-aligned bounding box that encloses all "
-"instances within the multimesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the number of instances allocated for this multimesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the RID of the mesh that will be used in drawing this multimesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the number of visible instances for this multimesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the color by which the specified instance will be modulated."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the custom data associated with the specified instance."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the [Transform] of the specified instance."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns the [Transform2D] of the specified instance. For use when the "
-"multimesh is set to use 2D transforms."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the color by which this instance will be modulated. Equivalent to "
-"[method MultiMesh.set_instance_color]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the custom data for this instance. Custom data is passed as a [Color], "
-"but is interpreted as a [code]vec4[/code] in the shader. Equivalent to "
-"[method MultiMesh.set_instance_custom_data]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [Transform] for this instance. Equivalent to [method MultiMesh."
-"set_instance_transform]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [Transform2D] for this instance. For use when multimesh is used in "
-"2D. Equivalent to [method MultiMesh.set_instance_transform_2d]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets all data related to the instances in one go. This is especially useful "
-"when loading the data from disk or preparing the data from GDNative.\n"
-"\n"
-"All data is packed in one large float array. An array may look like this: "
-"Transform for instance 1, color data for instance 1, custom data for "
-"instance 1, transform for instance 2, color data for instance 2, etc.\n"
-"\n"
-"[Transform] is stored as 12 floats, [Transform2D] is stored as 8 floats, "
-"[code]COLOR_8BIT[/code] / [code]CUSTOM_DATA_8BIT[/code] is stored as 1 float "
-"(4 bytes as is) and [code]COLOR_FLOAT[/code] / [code]CUSTOM_DATA_FLOAT[/"
-"code] is stored as 4 floats."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the mesh to be drawn by the multimesh. Equivalent to [member MultiMesh."
-"mesh]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the number of instances visible at a given time. If -1, all instances "
-"that have been allocated are drawn. Equivalent to [member MultiMesh."
-"visible_instance_count]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a new omni light and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID can be used in most [code]light_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this omni light to an instance using [method "
-"instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a particle system and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]particles_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach these particles to an instance using [method "
-"instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Calculates and returns the axis-aligned bounding box that contains all the "
-"particles. Equivalent to [method Particles.capture_aabb]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns [code]true[/code] if particles are currently set to emitting."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns [code]true[/code] if particles are not emitting and particles are "
-"set to inactive."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Add particle system to list of particle systems that need to be updated. "
-"Update will take place on the next frame, or on the next call to [method "
-"instances_cull_aabb], [method instances_cull_convex], or [method "
-"instances_cull_ray]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Reset the particles on the next update. Equivalent to [method Particles."
-"restart]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the number of particles to be drawn and allocates the memory for them. "
-"Equivalent to [member Particles.amount]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a custom axis-aligned bounding box for the particle system. Equivalent "
-"to [member Particles.visibility_aabb]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the draw order of the particles to one of the named enums from [enum "
-"ParticlesDrawOrder]. See [enum ParticlesDrawOrder] for options. Equivalent "
-"to [member Particles.draw_order]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the mesh to be used for the specified draw pass. Equivalent to [member "
-"Particles.draw_pass_1], [member Particles.draw_pass_2], [member Particles."
-"draw_pass_3], and [member Particles.draw_pass_4]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the number of draw passes to use. Equivalent to [member Particles."
-"draw_passes]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [Transform] that will be used by the particles when they first emit."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], particles will emit over time. Setting to false does "
-"not reset the particles, but only stops their emission. Equivalent to "
-"[member Particles.emitting]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the explosiveness ratio. Equivalent to [member Particles.explosiveness]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the frame rate that the particle system rendering will be fixed to. "
-"Equivalent to [member Particles.fixed_fps]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], uses fractional delta which smooths the movement of "
-"the particles. Equivalent to [member Particles.fract_delta]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the lifetime of each particle in the system. Equivalent to [member "
-"Particles.lifetime]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], particles will emit once and then stop. Equivalent to "
-"[member Particles.one_shot]."
-msgstr ""
-"Wenn der Wert [code]true[/code] ist, dann ist Tranzparenz für den Körper "
-"aktiviert. Siehe auch [member blend_mode]."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the preprocess time for the particles' animation. This lets you delay "
-"starting an animation until after the particles have begun emitting. "
-"Equivalent to [member Particles.preprocess]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the material for processing the particles.\n"
-"[b]Note:[/b] This is not the material used to draw the materials. Equivalent "
-"to [member Particles.process_material]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the emission randomness ratio. This randomizes the emission of "
-"particles within their phase. Equivalent to [member Particles.randomness]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the speed scale of the particle system. Equivalent to [member Particles."
-"speed_scale]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], particles use local coordinates. If [code]false[/code] "
-"they use global coordinates. Equivalent to [member Particles.local_coords]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a reflection probe and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]reflection_probe_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this reflection probe to an instance using "
-"[method instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], reflections will ignore sky contribution. Equivalent "
-"to [member ReflectionProbe.interior_enable]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the render cull mask for this reflection probe. Only instances with a "
-"matching cull mask will be rendered by this probe. Equivalent to [member "
-"ReflectionProbe.cull_mask]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], uses box projection. This can make reflections look "
-"more correct in certain situations. Equivalent to [member ReflectionProbe."
-"box_projection]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], computes shadows in the reflection probe. This makes "
-"the reflection much slower to compute. Equivalent to [member ReflectionProbe."
-"enable_shadows]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the size of the area that the reflection probe will capture. Equivalent "
-"to [member ReflectionProbe.extents]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the intensity of the reflection probe. Intensity modulates the strength "
-"of the reflection. Equivalent to [member ReflectionProbe.intensity]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the ambient light color for this reflection probe when set to interior "
-"mode. Equivalent to [member ReflectionProbe.interior_ambient_color]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the energy multiplier for this reflection probes ambient light "
-"contribution when set to interior mode. Equivalent to [member "
-"ReflectionProbe.interior_ambient_energy]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the contribution value for how much the reflection affects the ambient "
-"light for this reflection probe when set to interior mode. Useful so that "
-"ambient light matches the color of the room. Equivalent to [member "
-"ReflectionProbe.interior_ambient_contrib]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the max distance away from the probe an object can be before it is "
-"culled. Equivalent to [member ReflectionProbe.max_distance]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the origin offset to be used when this reflection probe is in box "
-"project mode. Equivalent to [member ReflectionProbe.origin_offset]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets how often the reflection probe updates. Can either be once or every "
-"frame. See [enum ReflectionProbeUpdateMode] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Schedules a callback to the corresponding named [code]method[/code] on "
-"[code]where[/code] after a frame has been drawn.\n"
-"The callback method must use only 1 argument which will be called with "
-"[code]userdata[/code]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a scenario and adds it to the VisualServer. It can be accessed with "
-"the RID that is returned. This RID will be used in all [code]scenario_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"The scenario is the 3D world that all the visual instances exist in."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the [enum ScenarioDebugMode] for this scenario. See [enum "
-"ScenarioDebugMode] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the environment that will be used with this scenario."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the fallback environment to be used by this scenario. The fallback "
-"environment is used if no environment is set. Internally, this is used by "
-"the editor to provide a default environment."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the size of the reflection atlas shared by all reflection probes in "
-"this scenario."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a boot image. The color defines the background color. If [code]scale[/"
-"code] is [code]true[/code], the image will be scaled to fit the screen size. "
-"If [code]use_filter[/code] is [code]true[/code], the image will be scaled "
-"with linear interpolation. If [code]use_filter[/code] is [code]false[/code], "
-"the image will be scaled with nearest-neighbor interpolation."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], the engine will generate wireframes for use with the "
-"wireframe debug mode."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the default clear color which is used when a specific clear color has "
-"not been selected."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If asynchronous shader compilation is enabled, this controls whether "
-"[constant SpatialMaterial.ASYNC_MODE_HIDDEN] is obeyed.\n"
-"For instance, you may want to enable this temporarily before taking a "
-"screenshot. This ensures everything is visible even if shaders with async "
-"mode [i]hidden[/i] are not ready yet.\n"
-"Reflection probes use this internally to ensure they capture everything "
-"regardless the shaders are ready or not."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the scale to apply to the passage of time for the shaders' [code]TIME[/"
-"code] builtin.\n"
-"The default value is [code]1.0[/code], which means [code]TIME[/code] will "
-"count the real time as it goes by, without narrowing or stretching it."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Enables or disables occlusion culling."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an empty shader and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID will be used in all [code]shader_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a shader's code."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns a default texture from a shader searched by name."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the parameters of a shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a shader's code."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a shader's default texture. Overwrites the texture given by name."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Allocates the GPU buffers for this skeleton."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the [Transform] set for a specific bone of this skeleton."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the [Transform2D] set for a specific bone of this skeleton."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the [Transform] for a specific bone of this skeleton."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the [Transform2D] for a specific bone of this skeleton."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a skeleton and adds it to the VisualServer. It can be accessed with "
-"the RID that is returned. This RID will be used in all [code]skeleton_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the number of bones allocated for this skeleton."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an empty sky and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID will be used in all [code]sky_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a sky's texture."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a spot light and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID can be used in most [code]light_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method.\n"
-"To place in a scene, attach this spot light to an instance using [method "
-"instance_set_base] using the returned RID."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Allocates the GPU memory for the texture."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Binds the texture to a texture slot."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an empty texture and adds it to the VisualServer. It can be accessed "
-"with the RID that is returned. This RID will be used in all [code]texture_*[/"
-"code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates a texture, allocates the space for an image, and fills in the image."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns a list of all the textures and their information."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns a copy of a texture's image unless it's a CubeMap, in which case it "
-"returns the [RID] of the image at one of the cubes sides."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the depth of the texture."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the flags of a texture."
-msgstr "Gibt die [Texture2D] des angegebenen Rahmens zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the format of the texture's image."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the texture's height."
-msgstr "Gibt den gegebenen Übergang zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the texture's path."
-msgstr "Gibt den Tangens des Parameters zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the opengl id of the texture's image."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the type of the texture, can be any of the [enum TextureType]."
-msgstr "Gibt den Namen der nächsten Animation in der Warteschlange zurück."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Returns the texture's width."
-msgstr "Gibt den gegebenen Übergang zurück."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the texture's image data. If it's a CubeMap, it sets the image data at "
-"a cube side."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a part of the data for a texture. Warning: this function calls the "
-"underlying graphics API directly and may corrupt your texture if used "
-"improperly."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Sets the texture's flags. See [enum TextureFlags] for options."
-msgstr ""
-"Wiederholungs flags für die Textur. Siehe [enum TextureFilter] für Optionen."
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Sets the texture's path."
-msgstr "Der Zeichen-Offset der Textur."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an update link between two textures, similar to how "
-"[ViewportTexture]s operate. When the base texture is the texture of a "
-"[Viewport], every time the viewport renders a new frame, the proxy texture "
-"automatically receives an update.\n"
-"For example, this code links a generic [ImageTexture] to the texture output "
-"of the [Viewport] using the VisualServer API:\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    var viewport_rid = get_viewport().get_viewport_rid()\n"
-"    var viewport_texture_rid = VisualServer."
-"viewport_get_texture(viewport_rid)\n"
-"\n"
-"    var proxy_texture = ImageTexture.new()\n"
-"    var viewport_texture_image_data = VisualServer."
-"texture_get_data(viewport_texture_rid)\n"
-"\n"
-"    proxy_texture.create_from_image(viewport_texture_image_data)\n"
-"    var proxy_texture_rid = proxy_texture.get_rid()\n"
-"    VisualServer.texture_set_proxy(proxy_texture_rid, viewport_texture_rid)\n"
-"\n"
-"    $TextureRect.texture = proxy_texture\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], sets internal processes to shrink all image data to "
-"half the size."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid ""
-"If [code]true[/code], the image will be stored in the texture's images array "
-"if overwritten."
-msgstr ""
-"Wenn [code]true[/code], wird die Sub-Animation nach Beendigung automatisch "
-"neu gestartet."
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a viewport's camera."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets a viewport's canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Copies viewport to a region of the screen specified by [code]rect[/code]. If "
-"[member Viewport.render_direct_to_screen] is [code]true[/code], then "
-"viewport does not use a framebuffer and the contents of the viewport are "
-"rendered directly to screen. However, note that the root viewport is drawn "
-"last, therefore it will draw over the screen. Accordingly, you must set the "
-"root viewport to an area that does not cover the area that you have attached "
-"this viewport to.\n"
-"For example, you can set the root viewport to not render at all with the "
-"following code:\n"
-"[codeblock]\n"
-"func _ready():\n"
-"    get_viewport().set_attach_to_screen_rect(Rect2())\n"
-"    $Viewport.set_attach_to_screen_rect(Rect2(0, 0, 600, 600))\n"
-"[/codeblock]\n"
-"Using this can result in significant optimization, especially on lower-end "
-"devices. However, it comes at the cost of having to manage your viewports "
-"manually. For further optimization, see [method "
-"viewport_set_render_direct_to_screen]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Creates an empty viewport and adds it to the VisualServer. It can be "
-"accessed with the RID that is returned. This RID will be used in all "
-"[code]viewport_*[/code] VisualServer functions.\n"
-"Once finished with your RID, you will want to free the RID using the "
-"VisualServer's [method free_rid] static method."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "Detaches the viewport from the screen."
-msgstr "Löscht das übergebene Node aus dem Graphen."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Returns a viewport's render information. For options, see the [enum "
-"ViewportRenderInfo] constants."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Returns the viewport's last rendered frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Detaches a viewport from a canvas and vice versa."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "If [code]true[/code], sets the viewport active, else sets it inactive."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the stacking order for a viewport's canvas.\n"
-"[code]layer[/code] is the actual canvas layer, while [code]sublayer[/code] "
-"specifies the stacking order of the canvas among those in the same layer."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the transformation of a viewport's canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the clear mode of a viewport. See [enum ViewportClearMode] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the debug draw mode of a viewport. See [enum ViewportDebugDraw] for "
-"options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "If [code]true[/code], a viewport's 3D rendering is disabled."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], rendering of a viewport's environment is disabled."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the viewport's global transformation matrix."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], the viewport renders to high dynamic range (HDR) "
-"instead of standard dynamic range (SDR). See also [method "
-"viewport_set_use_32_bpc_depth].\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "If [code]true[/code], the viewport's canvas is not rendered."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Currently unimplemented in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the anti-aliasing mode. See [enum ViewportMSAA] for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the viewport's parent to another viewport."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], render the contents of the viewport directly to "
-"screen. This allows a low-level optimization where you can skip drawing a "
-"viewport to the root viewport. While this optimization can result in a "
-"significant increase in speed (especially on older devices), it comes at a "
-"cost of usability. When this is enabled, you cannot read from the viewport "
-"or from the [code]SCREEN_TEXTURE[/code]. You also lose the benefit of "
-"certain window settings, such as the various stretch modes. Another "
-"consequence to be aware of is that in 2D the rendering happens in window "
-"coordinates, so if you have a viewport that is double the size of the "
-"window, and you set this, then only the portion that fits within the window "
-"will be drawn, no automatic scaling is possible, even if your game scene is "
-"significantly larger than the window size."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets a viewport's scenario.\n"
-"The scenario contains information about the [enum ScenarioDebugMode], "
-"environment information, reflection atlas etc."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the shadow atlas quadrant's subdivision."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the size of the shadow atlas's images (used for omni and spot lights). "
-"The value will be rounded up to the nearest power of 2."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the sharpening [code]intensity[/code] for the [code]viewport[/code]. If "
-"set to a value greater than [code]0.0[/code], contrast-adaptive sharpening "
-"will be applied to the 3D viewport. This has a low performance cost and can "
-"be used to recover some of the sharpness lost from using FXAA. Values around "
-"[code]0.5[/code] generally give the best results. See also [method "
-"viewport_set_use_fxaa]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sets the viewport's width and height."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], the viewport renders its background as transparent."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets when the viewport should be updated. See [enum ViewportUpdateMode] "
-"constants for options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Sets the viewport's 2D/3D mode. See [enum ViewportUsage] constants for "
-"options."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], allocates the viewport's framebuffer with full "
-"floating-point precision (32-bit) instead of half floating-point precision "
-"(16-bit). Only effective if [method viewport_set_use_32_bpc_depth] is used "
-"on the same [Viewport] to set HDR to [code]true[/code].\n"
-"[b]Note:[/b] Only available on the GLES3 backend."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], the viewport uses augmented or virtual reality "
-"technologies. See [ARVRInterface]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]true[/code], uses a fast post-processing filter to make banding "
-"significantly less visible. In some cases, debanding may introduce a "
-"slightly noticeable dithering pattern. It's recommended to enable debanding "
-"only when actually needed since the dithering pattern will make lossless-"
-"compressed screenshots larger.\n"
-"[b]Note:[/b] Only available on the GLES3 backend. [member Viewport.hdr] must "
-"also be [code]true[/code] for debanding to be effective."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Enables fast approximate antialiasing for this viewport. FXAA is a popular "
-"screen-space antialiasing method, which is fast but will make the image look "
-"blurry, especially at lower resolutions. It can still work relatively well "
-"at large resolutions such as 1440p and 4K. Some of the lost sharpness can be "
-"recovered by enabling contrast-adaptive sharpening (see [method "
-"viewport_set_sharpen_intensity])."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "If [code]true[/code], the viewport's rendering is flipped vertically."
-msgstr "Wenn [code]true[/code], wird die Textur vertikal gespiegelt."
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"If [code]false[/code], disables rendering completely, but the engine logic "
-"is still being processed. You can call [method force_draw] to draw a frame "
-"even with rendering disabled."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Emitted at the end of the frame, after the VisualServer has finished "
-"updating all the Viewports."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Emitted at the beginning of the frame, before the VisualServer updates all "
-"the Viewports."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks an error that shows that the index array is empty."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of weights/bones per vertex."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The minimum Z-layer for canvas items."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The maximum Z-layer for canvas items."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Max number of glow levels that can be used with glow post-process effect."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Unused enum in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The minimum renderpriority of all materials."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The maximum renderpriority of all materials."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks the left side of a cubemap."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks the right side of a cubemap."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks the bottom side of a cubemap."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks the top side of a cubemap."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks the front side of a cubemap."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Marks the back side of a cubemap."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Normal texture with 2 dimensions, width and height."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Texture made up of six faces, can be looked up with a [code]vec3[/code] in "
-"shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "An array of 2-dimensional textures."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "A 3-dimensional texture with width, height, and depth."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Repeats the texture (instead of clamp to edge)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Repeats the texture with alternate sections mirrored."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Default flags. [constant TEXTURE_FLAG_MIPMAPS], [constant "
-"TEXTURE_FLAG_REPEAT] and [constant TEXTURE_FLAG_FILTER] are enabled."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Shader is a 3D shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Shader is a 2D shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Shader is a particle shader."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum ShaderMode] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is a vertex array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is a normal array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is a tangent array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is a color array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is an UV coordinates array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is an UV coordinates array for the second UV coordinates."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array contains bone information."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is weight information."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Array is index array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a vertex array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a normal array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a tangent array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a color array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark an UV coordinates array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Flag used to mark an UV coordinates array for the second UV coordinates."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a bone information array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a weights array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark an index array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Flag used to mark a compressed (half float) color array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Used to set flags [constant ARRAY_COMPRESS_NORMAL], [constant "
-"ARRAY_COMPRESS_TANGENT], [constant ARRAY_COMPRESS_COLOR], [constant "
-"ARRAY_COMPRESS_TEX_UV], [constant ARRAY_COMPRESS_TEX_UV2], [constant "
-"ARRAY_COMPRESS_WEIGHTS], and [constant "
-"ARRAY_FLAG_USE_OCTAHEDRAL_COMPRESSION] quickly."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Primitive to draw consists of points."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Primitive to draw consists of lines."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Primitive to draw consists of a line strip from start to end."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Primitive to draw consists of a line loop (a line strip with a line between "
-"the last and the first vertex)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Primitive to draw consists of triangles."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Primitive to draw consists of a triangle strip (the last 3 vertices are "
-"always combined to make a triangle)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Primitive to draw consists of a triangle strip (the last 2 vertices are "
-"always combined with the first to make a triangle)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum PrimitiveType] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Is a directional (sun) light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Is an omni light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Is a spot light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The light's energy."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Secondary multiplier used with indirect light (light bounces)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"The light's size, currently only used for soft shadows in baked lightmaps."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The light's influence on specularity."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The light's range."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The light's attenuation."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The spotlight's angle."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The spotlight's attenuation."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Scales the shadow color."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Max distance that shadows will be rendered."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Proportion of shadow atlas occupied by the first split."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Proportion of shadow atlas occupied by the second split."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Proportion of shadow atlas occupied by the third split. The fourth split "
-"occupies the rest."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Normal bias used to offset shadow lookup by object normal. Can be used to "
-"fix self-shadowing artifacts."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Bias the shadow lookup to fix self-shadowing artifacts."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Increases bias on further splits to fix self-shadowing that only occurs far "
-"away from the camera."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum LightParam] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use a dual paraboloid shadow map for omni lights."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use a cubemap shadow map for omni lights. Slower but better quality than "
-"dual paraboloid."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use more detail vertically when computing shadow map."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use more detail horizontally when computing shadow map."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use orthogonal shadow projection for directional light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use 2 splits for shadow projection when using directional light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use 4 splits for shadow projection when using directional light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Keeps shadows stable as camera moves but has lower effective resolution."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Optimize use of shadow maps, increasing the effective resolution. But may "
-"result in shadows moving or flickering slightly."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Do not update the viewport."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Update the viewport once then set to disabled."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Update the viewport whenever it is visible."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Always update the viewport."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The viewport is always cleared before drawing."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The viewport is never cleared before drawing."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"The viewport is cleared once, then the clear mode is set to [constant "
-"VIEWPORT_CLEAR_NEVER]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Multisample antialiasing is disabled."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Multisample antialiasing is set to 2×."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Multisample antialiasing is set to 4×."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Multisample antialiasing is set to 8×."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Multisample antialiasing is set to 16×."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Multisample antialiasing is set to 2× on external texture. Special mode for "
-"GLES2 Android VR (Oculus Quest and Go)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Multisample antialiasing is set to 4× on external texture. Special mode for "
-"GLES2 Android VR (Oculus Quest and Go)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The Viewport does not render 3D but samples."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The Viewport does not render 3D and does not sample."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The Viewport renders 3D with effects."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The Viewport renders 3D but without effects."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of objects drawn in a single frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of vertices drawn in a single frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of material changes during this frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of shader changes during this frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of surface changes during this frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of draw calls during this frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of 2d items drawn this frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Number of 2d draw calls during this frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum ViewportRenderInfo] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Debug draw is disabled. Default setting."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Debug draw sets objects to unshaded."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Overwrites clear color to [code](0,0,0,0)[/code]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Debug draw draws objects in wireframe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Do not use a debug mode."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Draw all objects as wireframe models."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Draw all objects in a way that displays how much overdraw is occurring. "
-"Overdraw occurs when a section of pixels is drawn and shaded and then "
-"another object covers it up. To optimize a scene, you should reduce overdraw."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Draw all objects without shading. Equivalent to setting all objects shaders "
-"to [code]unshaded[/code]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance does not have a type."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a mesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a multimesh."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is an immediate geometry."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a particle emitter."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a light."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a reflection probe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a GI probe."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The instance is a lightmap capture."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum InstanceType] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"A combination of the flags of geometry instances (mesh, multimesh, immediate "
-"and particles)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Allows the instance to be used in baked lighting."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "When set, manually requests to draw geometry on next frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum InstanceFlags] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Disable shadows from this instance."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Cast shadows from this instance."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Disable backface culling when rendering the shadow of the object. This is "
-"slightly slower but may result in more correct shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Only render the shadows from the object. The object itself will not be drawn."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The nine patch gets stretched where needed."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The nine patch gets filled with tiles where needed."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"The nine patch gets filled with tiles where needed and stretches them a bit "
-"if needed."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds light color additive to the canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Adds light color subtractive to the canvas."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The light adds color depending on transparency."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The light adds color depending on mask."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Do not apply a filter to canvas light shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use PCF3 filtering to filter canvas light shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use PCF5 filtering to filter canvas light shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use PCF7 filtering to filter canvas light shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use PCF9 filtering to filter canvas light shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use PCF13 filtering to filter canvas light shadows."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Culling of the canvas occluder is disabled."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Culling of the canvas occluder is clockwise."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Culling of the canvas occluder is counterclockwise."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of objects in the frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of vertices in the frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of modified materials in the frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of shader rebinds in the frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"The peak amount of shaders that have been under compilation in the frame.\n"
-"This is useful to know when asynchronous shader compilation has finished for "
-"the current shaders on screen.\n"
-"[b]Note:[/b] For complete certainty, only assume there are no outstanding "
-"compilations when this value is zero for at least two frames in a row.\n"
-"Unimplemented in the GLES2 rendering backend, always returns 0."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of surface changes in the frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of draw calls in frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-#, fuzzy
-msgid "The amount of 2d items in the frame."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/VisualServer.xml
-msgid "The amount of 2d draw calls in frame."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Hardware supports shaders. This enum is currently unused in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Hardware supports multithreading. This enum is currently unused in Godot 3.x."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use [Transform2D] to store MultiMesh transform."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use [Transform] to store MultiMesh transform."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "MultiMesh does not use per-instance color."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"MultiMesh color uses 8 bits per component. This packs the color into a "
-"single float."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "MultiMesh color uses a float per channel."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "MultiMesh does not use custom data."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"MultiMesh custom data uses 8 bits per component. This packs the 4-component "
-"custom data into a single float."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "MultiMesh custom data uses a float per component."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Reflection probe will update reflections once and then stop."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Reflection probe will update each frame. This mode is necessary to capture "
-"moving objects."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Draw particles in the order that they appear in the particles array."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sort particles based on their lifetime."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Sort particles based on their distance to the camera."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use the clear color as background."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use a specified color as the background."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use a sky resource for the background."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use a custom color for background, but use a sky for shading and reflections."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use a specified canvas layer as the background. This can be useful for "
-"instantiating a 2D scene in a 3D world."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Do not clear the background, use whatever was rendered last frame as the "
-"background."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Represents the size of the [enum EnvironmentBG] enum."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use lowest blur quality. Fastest, but may look bad."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Use medium blur quality."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Used highest blur quality. Looks the best, but is the slowest."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Add the effect of the glow on top of the scene."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Blends the glow effect with the screen. Does not get as bright as additive."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Produces a subtle color disturbance around objects."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Shows the glow effect by itself without the underlying scene."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Output color as they came in. This can cause bright lighting to look blown "
-"out, with noticeable clipping in the output colors."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use the Reinhard tonemapper. Performs a variation on rendered pixels' colors "
-"by this formula: [code]color = color / (1 + color)[/code]. This avoids "
-"clipping bright highlights, but the resulting image can look a bit dull."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use the filmic tonemapper. This avoids clipping bright highlights, with a "
-"resulting image that usually looks more vivid than [constant "
-"ENV_TONE_MAPPER_REINHARD]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use the legacy Godot version of the Academy Color Encoding System "
-"tonemapper. Unlike [constant ENV_TONE_MAPPER_ACES_FITTED], this version of "
-"ACES does not handle bright lighting in a physically accurate way. ACES "
-"typically has a more contrasted output compared to [constant "
-"ENV_TONE_MAPPER_REINHARD] and [constant ENV_TONE_MAPPER_FILMIC].\n"
-"[b]Note:[/b] This tonemapping operator will be removed in Godot 4.0 in favor "
-"of the more accurate [constant ENV_TONE_MAPPER_ACES_FITTED]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Use the Academy Color Encoding System tonemapper. ACES is slightly more "
-"expensive than other options, but it handles bright lighting in a more "
-"realistic fashion by desaturating it as it becomes brighter. ACES typically "
-"has a more contrasted output compared to [constant ENV_TONE_MAPPER_REINHARD] "
-"and [constant ENV_TONE_MAPPER_FILMIC]."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Lowest quality of screen space ambient occlusion."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Medium quality screen space ambient occlusion."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Highest quality screen space ambient occlusion."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Disables the blur set for SSAO. Will make SSAO look noisier."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Perform a 1x1 blur on the SSAO output."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Performs a 2x2 blur on the SSAO output."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Performs a 3x3 blur on the SSAO output. Use this for smoothest SSAO."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Used to query for any changes that request a redraw, whatever the priority."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid ""
-"Registered changes which have low priority can be optionally prevented from "
-"causing editor redraws. Examples might include dynamic shaders (typically "
-"using the [code]TIME[/code] built-in)."
-msgstr ""
-
-#: doc/classes/VisualServer.xml
-msgid "Registered changes which can cause a redraw default to high priority."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "A custom shader program with a visual editor."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid ""
-"This class allows you to define a custom shader program that can be used for "
-"various materials to render objects.\n"
-"The visual shader editor creates the shader."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Adds the specified node to the shader."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid ""
-"Returns [code]true[/code] if the specified nodes and ports can be connected "
-"together."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Connects the specified nodes and ports."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid ""
-"Connects the specified nodes and ports, even if they can't be connected. "
-"Such connection is invalid and will not function properly."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid ""
-"Returns the shader node instance with specified [code]type[/code] and "
-"[code]id[/code]."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Returns the list of connected nodes with the specified type."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Returns the list of all nodes in the shader with the specified type."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Returns the position of the specified node within the shader graph."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid ""
-"Returns [code]true[/code] if the specified node and port connection exist."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Removes the specified node from the shader."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Sets the mode of this shader."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Sets the position of the specified node."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "The offset vector of the whole graph."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "A vertex shader, operating on vertices."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "A fragment shader, operating on fragments (pixels)."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "A shader for light calculations."
-msgstr ""
-
-#: doc/classes/VisualShader.xml
-msgid "Represents the size of the [enum Type] enum."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid "Base class for nodes in a visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Visual shader graphs consist of various nodes. Each node in the graph is a "
-"separate object and they are represented as a rectangular boxes with title "
-"and a set of properties. Each node has also connection ports that allow to "
-"connect it to another nodes and control the flow of the shader."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Returns an [Array] containing default values for all of the input ports of "
-"the node in the form [code][index0, value0, index1, value1, ...][/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid "Returns the default value of the input [code]port[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Sets the default input ports values using an [Array] of the form [code]"
-"[index0, value0, index1, value1, ...][/code]. For example: [code][0, "
-"Vector3(0, 0, 0), 1, Vector3(0, 0, 0)][/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid "Sets the default value for the selected input [code]port[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Sets the output port index which will be showed for preview. If set to "
-"[code]-1[/code] no port will be open for preview."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Emitted when the node requests an editor refresh. Currently called only in "
-"setter of [member VisualShaderNodeTexture.source], "
-"[VisualShaderNodeTexture], and [VisualShaderNodeCubeMap] (and their "
-"derivatives)."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Floating-point scalar. Translated to [code]float[/code] type in shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"3D vector of floating-point values. Translated to [code]vec3[/code] type in "
-"shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid "Boolean type. Translated to [code]bool[/code] type in shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid "Transform type. Translated to [code]mat4[/code] type in shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid ""
-"Sampler type. Translated to reference of sampler uniform in shader code. Can "
-"only be used for input ports in non-uniform nodes."
-msgstr ""
-
-#: doc/classes/VisualShaderNode.xml
-msgid "Represents the size of the [enum PortType] enum."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanConstant.xml
-msgid "A boolean constant to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanConstant.xml
-msgid ""
-"Has only one output port and no inputs.\n"
-"Translated to [code]bool[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanConstant.xml
-msgid "A boolean constant which represents a state of this node."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanUniform.xml
-msgid "A boolean uniform to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanUniform.xml
-msgid "Translated to [code]uniform bool[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanUniform.xml
-#: doc/classes/VisualShaderNodeColorUniform.xml
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-#: doc/classes/VisualShaderNodeTransformUniform.xml
-#: doc/classes/VisualShaderNodeVec3Uniform.xml
-msgid "A default value to be assigned within the shader."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeBooleanUniform.xml
-#: doc/classes/VisualShaderNodeColorUniform.xml
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-#: doc/classes/VisualShaderNodeTransformUniform.xml
-#: doc/classes/VisualShaderNodeVec3Uniform.xml
-msgid "Enables usage of the [member default_value]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorConstant.xml
-msgid "A [Color] constant to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorConstant.xml
-msgid ""
-"Has two output ports representing RGB and alpha channels of [Color].\n"
-"Translated to [code]vec3 rgb[/code] and [code]float alpha[/code] in the "
-"shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorConstant.xml
-msgid "A [Color] constant which represents a state of this node."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorFunc.xml
-msgid "A [Color] function to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorFunc.xml
-msgid ""
-"Accept a [Color] to the input port and transform it according to [member "
-"function]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorFunc.xml
-msgid ""
-"A function to be applied to the input color. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorFunc.xml
-msgid ""
-"Converts the color to grayscale using the following formula:\n"
-"[codeblock]\n"
-"vec3 c = input;\n"
-"float max1 = max(c.r, c.g);\n"
-"float max2 = max(max1, c.b);\n"
-"float max3 = max(max1, max2);\n"
-"return vec3(max3, max3, max3);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorFunc.xml
-msgid ""
-"Applies sepia tone effect using the following formula:\n"
-"[codeblock]\n"
-"vec3 c = input;\n"
-"float r = (c.r * 0.393) + (c.g * 0.769) + (c.b * 0.189);\n"
-"float g = (c.r * 0.349) + (c.g * 0.686) + (c.b * 0.168);\n"
-"float b = (c.r * 0.272) + (c.g * 0.534) + (c.b * 0.131);\n"
-"return vec3(r, g, b);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid "A [Color] operator to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid "Applies [member operator] to two color inputs."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"An operator to be applied to the inputs. See [enum Operator] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a screen effect with the following formula:\n"
-"[codeblock]\n"
-"result = vec3(1.0) - (vec3(1.0) - a) * (vec3(1.0) - b);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a difference effect with the following formula:\n"
-"[codeblock]\n"
-"result = abs(a - b);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a darken effect with the following formula:\n"
-"[codeblock]\n"
-"result = min(a, b);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a lighten effect with the following formula:\n"
-"[codeblock]\n"
-"result = max(a, b);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce an overlay effect with the following formula:\n"
-"[codeblock]\n"
-"for (int i = 0; i < 3; i++) {\n"
-"    float base = a[i];\n"
-"    float blend = b[i];\n"
-"    if (base < 0.5) {\n"
-"        result[i] = 2.0 * base * blend;\n"
-"    } else {\n"
-"        result[i] = 1.0 - 2.0 * (1.0 - blend) * (1.0 - base);\n"
-"    }\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a dodge effect with the following formula:\n"
-"[codeblock]\n"
-"result = a / (vec3(1.0) - b);\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a burn effect with the following formula:\n"
-"[codeblock]\n"
-"result = vec3(1.0) - (vec3(1.0) - a) / b;\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a soft light effect with the following formula:\n"
-"[codeblock]\n"
-"for (int i = 0; i < 3; i++) {\n"
-"    float base = a[i];\n"
-"    float blend = b[i];\n"
-"    if (base < 0.5) {\n"
-"        result[i] = base * (blend + 0.5);\n"
-"    } else {\n"
-"        result[i] = 1.0 - (1.0 - base) * (1.0 - (blend - 0.5));\n"
-"    }\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorOp.xml
-msgid ""
-"Produce a hard light effect with the following formula:\n"
-"[codeblock]\n"
-"for (int i = 0; i < 3; i++) {\n"
-"    float base = a[i];\n"
-"    float blend = b[i];\n"
-"    if (base < 0.5) {\n"
-"        result[i] = base * (2.0 * blend);\n"
-"    } else {\n"
-"        result[i] = 1.0 - (1.0 - base) * (1.0 - 2.0 * (blend - 0.5));\n"
-"    }\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorUniform.xml
-msgid "A [Color] uniform to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeColorUniform.xml
-msgid "Translated to [code]uniform vec4[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "A comparison function for common types within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"Compares [code]a[/code] and [code]b[/code] of [member type] by [member "
-"function]. Returns a boolean scalar. Translates to [code]if[/code] "
-"instruction in shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"Extra condition which is applied if [member type] is set to [constant "
-"CTYPE_VECTOR]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "A comparison function. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"The type to be used in the comparison. See [enum ComparisonType] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "A floating-point scalar."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "A 3D vector type."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "A boolean type."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "A transform ([code]mat4[/code]) type."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "Comparison for equality ([code]a == b[/code])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid "Comparison for inequality ([code]a != b[/code])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"Comparison for greater than ([code]a > b[/code]). Cannot be used if [member "
-"type] set to [constant CTYPE_BOOLEAN] or [constant CTYPE_TRANSFORM]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"Comparison for greater than or equal ([code]a >= b[/code]). Cannot be used "
-"if [member type] set to [constant CTYPE_BOOLEAN] or [constant "
-"CTYPE_TRANSFORM]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"Comparison for less than ([code]a < b[/code]). Cannot be used if [member "
-"type] set to [constant CTYPE_BOOLEAN] or [constant CTYPE_TRANSFORM]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"Comparison for less than or equal ([code]a < b[/code]). Cannot be used if "
-"[member type] set to [constant CTYPE_BOOLEAN] or [constant CTYPE_TRANSFORM]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"The result will be true if all of component in vector satisfy the comparison "
-"condition."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCompare.xml
-msgid ""
-"The result will be true if any of component in vector satisfy the comparison "
-"condition."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-msgid "A [CubeMap] sampling node to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-msgid ""
-"Translated to [code]texture(cubemap, vec3)[/code] in the shader language. "
-"Returns a color vector and alpha channel as scalar."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-msgid ""
-"The [CubeMap] texture to sample when using [constant SOURCE_TEXTURE] as "
-"[member source]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-msgid ""
-"Defines which source should be used for the sampling. See [enum Source] for "
-"options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid ""
-"Defines the type of data provided by the source texture. See [enum "
-"TextureType] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-msgid ""
-"Use the [CubeMap] set via [member cube_map]. If this is set to [member "
-"source], the [code]samplerCube[/code] port is ignored."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-msgid ""
-"Use the [CubeMap] sampler reference passed via the [code]samplerCube[/code] "
-"port. If this is set to [member source], the [member cube_map] texture is "
-"ignored."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-#: doc/classes/VisualShaderNodeTexture.xml
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid "No hints are added to the uniform declaration."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-#: doc/classes/VisualShaderNodeTexture.xml
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid ""
-"Adds [code]hint_albedo[/code] as hint to the uniform declaration for proper "
-"sRGB to linear conversion."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMap.xml
-#: doc/classes/VisualShaderNodeTexture.xml
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid ""
-"Adds [code]hint_normal[/code] as hint to the uniform declaration, which "
-"internally converts the texture for proper usage as normal map."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMapUniform.xml
-msgid "A [CubeMap] uniform node to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCubeMapUniform.xml
-msgid ""
-"Translated to [code]uniform samplerCube[/code] in the shader language. The "
-"output value can be used as port for [VisualShaderNodeCubeMap]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Virtual class to define custom [VisualShaderNode]s for use in the Visual "
-"Shader Editor."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"By inheriting this class you can create a custom [VisualShader] script addon "
-"which will be automatically added to the Visual Shader Editor. The "
-"[VisualShaderNode]'s behavior is defined by overriding the provided virtual "
-"methods.\n"
-"In order for the node to be registered as an editor addon, you must use the "
-"[code]tool[/code] keyword and provide a [code]class_name[/code] for your "
-"custom script. For example:\n"
-"[codeblock]\n"
-"tool\n"
-"extends VisualShaderNodeCustom\n"
-"class_name VisualShaderNodeNoise\n"
-"[/codeblock]"
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the category of the associated custom node in "
-"the Visual Shader Editor's members dialog. The path may look like "
-"[code]\"MyGame/MyFunctions/Noise\"[/code].\n"
-"Defining this method is [b]optional[/b]. If not overridden, the node will be "
-"filed under the \"Custom\" category."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the actual shader code of the associated "
-"custom node. The shader code should be returned as a string, which can have "
-"multiple lines (the [code]\"\"\"[/code] multiline string construct can be "
-"used for convenience).\n"
-"The [code]input_vars[/code] and [code]output_vars[/code] arrays contain the "
-"string names of the various input and output variables, as defined by "
-"[code]_get_input_*[/code] and [code]_get_output_*[/code] virtual methods in "
-"this class.\n"
-"The output ports can be assigned values in the shader code. For example, "
-"[code]return output_vars[0] + \" = \" + input_vars[0] + \";\"[/code].\n"
-"You can customize the generated code based on the shader [code]mode[/code] "
-"(see [enum Shader.Mode]) and/or [code]type[/code] (see [enum VisualShader."
-"Type]).\n"
-"Defining this method is [b]required[/b]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the description of the associated custom node "
-"in the Visual Shader Editor's members dialog.\n"
-"Defining this method is [b]optional[/b]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to add shader code on top of the global shader, to "
-"define your own standard library of reusable methods, varyings, constants, "
-"uniforms, etc. The shader code should be returned as a string, which can "
-"have multiple lines (the [code]\"\"\"[/code] multiline string construct can "
-"be used for convenience).\n"
-"Be careful with this functionality as it can cause name conflicts with other "
-"custom nodes, so be sure to give the defined entities unique names.\n"
-"You can customize the generated code based on the shader [code]mode[/code] "
-"(see [enum Shader.Mode]).\n"
-"Defining this method is [b]optional[/b]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the amount of input ports of the associated "
-"custom node.\n"
-"Defining this method is [b]required[/b]. If not overridden, the node has no "
-"input ports."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the names of input ports of the associated "
-"custom node. The names are used both for the input slots in the editor and "
-"as identifiers in the shader code, and are passed in the [code]input_vars[/"
-"code] array in [method _get_code].\n"
-"Defining this method is [b]optional[/b], but recommended. If not overridden, "
-"input ports are named as [code]\"in\" + str(port)[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the returned type of each input port of the "
-"associated custom node (see [enum VisualShaderNode.PortType] for possible "
-"types).\n"
-"Defining this method is [b]optional[/b], but recommended. If not overridden, "
-"input ports will return the [constant VisualShaderNode.PORT_TYPE_SCALAR] "
-"type."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the name of the associated custom node in the "
-"Visual Shader Editor's members dialog and graph.\n"
-"Defining this method is [b]optional[/b], but recommended. If not overridden, "
-"the node will be named as \"Unnamed\"."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the amount of output ports of the associated "
-"custom node.\n"
-"Defining this method is [b]required[/b]. If not overridden, the node has no "
-"output ports."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the names of output ports of the associated "
-"custom node. The names are used both for the output slots in the editor and "
-"as identifiers in the shader code, and are passed in the [code]output_vars[/"
-"code] array in [method _get_code].\n"
-"Defining this method is [b]optional[/b], but recommended. If not overridden, "
-"output ports are named as [code]\"out\" + str(port)[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the returned type of each output port of the "
-"associated custom node (see [enum VisualShaderNode.PortType] for possible "
-"types).\n"
-"Defining this method is [b]optional[/b], but recommended. If not overridden, "
-"output ports will return the [constant VisualShaderNode.PORT_TYPE_SCALAR] "
-"type."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the return icon of the associated custom node "
-"in the Visual Shader Editor's members dialog.\n"
-"Defining this method is [b]optional[/b]. If not overridden, no return icon "
-"is shown."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeCustom.xml
-msgid ""
-"Override this method to define the subcategory of the associated custom node "
-"in the Visual Shader Editor's members dialog.\n"
-"Defining this method is [b]optional[/b]. If not overridden, the node will be "
-"filed under the root of the main category (see [method _get_category])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeDeterminant.xml
-msgid ""
-"Calculates the determinant of a [Transform] within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeDeterminant.xml
-msgid "Translates to [code]determinant(x)[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeDotProduct.xml
-msgid "Calculates a dot product of two vectors within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeDotProduct.xml
-msgid "Translates to [code]dot(a, b)[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeExpression.xml
-msgid ""
-"A custom visual shader graph expression written in Godot Shading Language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeExpression.xml
-msgid ""
-"Custom Godot Shading Language expression, with a custom amount of input and "
-"output ports.\n"
-"The provided code is directly injected into the graph's matching shader "
-"function ([code]vertex[/code], [code]fragment[/code], or [code]light[/"
-"code]), so it cannot be used to declare functions, varyings, uniforms, or "
-"global constants. See [VisualShaderNodeGlobalExpression] for such global "
-"definitions."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeExpression.xml
-msgid ""
-"An expression in Godot Shading Language, which will be injected at the start "
-"of the graph's matching shader function ([code]vertex[/code], "
-"[code]fragment[/code], or [code]light[/code]), and thus cannot be used to "
-"declare functions, varyings, uniforms, or global constants."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeFaceForward.xml
-msgid ""
-"Returns the vector that points in the same direction as a reference vector "
-"within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeFaceForward.xml
-msgid ""
-"Translates to [code]faceforward(N, I, Nref)[/code] in the shader language. "
-"The function has three vector parameters: [code]N[/code], the vector to "
-"orient, [code]I[/code], the incident vector, and [code]Nref[/code], the "
-"reference vector. If the dot product of [code]I[/code] and [code]Nref[/code] "
-"is smaller than zero the return value is [code]N[/code]. Otherwise, [code]-"
-"N[/code] is returned."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeFresnel.xml
-msgid "A Fresnel effect to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeFresnel.xml
-msgid ""
-"Returns falloff based on the dot product of surface normal and view "
-"direction of camera (pass associated inputs to it)."
-msgstr ""
-"Gibt den Abfall abgeleitet aus dem Skalarprodukt zwischen Flächennormale und "
-"Kamerablickrichtung zurück (zugeordnete Eingänge müssen übergeben werden)."
-
-#: doc/classes/VisualShaderNodeGlobalExpression.xml
-msgid ""
-"A custom global visual shader graph expression written in Godot Shading "
-"Language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGlobalExpression.xml
-msgid ""
-"Custom Godot Shader Language expression, which is placed on top of the "
-"generated shader. You can place various function definitions inside to call "
-"later in [VisualShaderNodeExpression]s (which are injected in the main "
-"shader functions). You can also declare varyings, uniforms and global "
-"constants."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Base class for a family of nodes with variable amount of input and output "
-"ports within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Currently, has no direct usage, use the derived classes instead."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Adds an input port with the specified [code]type[/code] (see [enum "
-"VisualShaderNode.PortType]) and [code]name[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Adds an output port with the specified [code]type[/code] (see [enum "
-"VisualShaderNode.PortType]) and [code]name[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Removes all previously specified input ports."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Removes all previously specified output ports."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns a free input port ID which can be used in [method add_input_port]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns a free output port ID which can be used in [method add_output_port]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns the number of input ports in use. Alternative for [method "
-"get_free_input_port_id]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns a [String] description of the input ports as a colon-separated list "
-"using the format [code]id,type,name;[/code] (see [method add_input_port])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns the number of output ports in use. Alternative for [method "
-"get_free_output_port_id]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns a [String] description of the output ports as a colon-separated list "
-"using the format [code]id,type,name;[/code] (see [method add_output_port])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Returns [code]true[/code] if the specified input port exists."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Returns [code]true[/code] if the specified output port exists."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Returns [code]true[/code] if the specified port name does not override an "
-"existed port name and is valid within the shader."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Removes the specified input port."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Removes the specified output port."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Renames the specified input port."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Sets the specified input port's type (see [enum VisualShaderNode.PortType])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Defines all input ports using a [String] formatted as a colon-separated "
-"list: [code]id,type,name;[/code] (see [method add_input_port])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "Renames the specified output port."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Sets the specified output port's type (see [enum VisualShaderNode.PortType])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid ""
-"Defines all output ports using a [String] formatted as a colon-separated "
-"list: [code]id,type,name;[/code] (see [method add_output_port])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeGroupBase.xml
-msgid "The size of the node in the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeInput.xml
-msgid ""
-"Gives access to input variables (built-ins) available for the shader. See "
-"the shading reference for the list of available built-ins for each shader "
-"type (check [code]Tutorials[/code] section for link)."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeInput.xml
-msgid ""
-"One of the several input constants in lower-case style like: "
-"\"vertex\"([code]VERTEX[/code]) or \"point_size\"([code]POINT_SIZE[/code])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeIs.xml
-msgid ""
-"A boolean comparison operator to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeIs.xml
-msgid ""
-"Returns the boolean result of the comparison between [code]INF[/code] or "
-"[code]NaN[/code] and a scalar parameter."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeIs.xml
-msgid "The comparison function. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeIs.xml
-msgid "Comparison with [code]INF[/code] (Infinity)."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeIs.xml
-msgid ""
-"Comparison with [code]NaN[/code] (Not a Number; denotes invalid numeric "
-"results, e.g. division by zero)."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeOuterProduct.xml
-msgid ""
-"Calculates an outer product of two vectors within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeOuterProduct.xml
-msgid ""
-"[code]OuterProduct[/code] treats the first parameter [code]c[/code] as a "
-"column vector (matrix with one column) and the second parameter [code]r[/"
-"code] as a row vector (matrix with one row) and does a linear algebraic "
-"matrix multiply [code]c * r[/code], yielding a matrix whose number of rows "
-"is the number of components in [code]c[/code] and whose number of columns is "
-"the number of components in [code]r[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeOutput.xml
-msgid "Represents the output shader parameters within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeOutput.xml
-msgid ""
-"This visual shader node is present in all shader graphs in form of "
-"\"Output\" block with multiple output value ports."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarClamp.xml
-msgid "Clamps a scalar value within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarClamp.xml
-msgid ""
-"Constrains a value to lie between [code]min[/code] and [code]max[/code] "
-"values."
-msgstr ""
-"Schränkt einen Wert ein, der zwischen den Werten [code]min[/code] und "
-"[code]max[/code] liegen muss."
-
-#: doc/classes/VisualShaderNodeScalarDerivativeFunc.xml
-msgid "Calculates a scalar derivative within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarDerivativeFunc.xml
-#: doc/classes/VisualShaderNodeVectorDerivativeFunc.xml
-msgid ""
-"This node is only available in [code]Fragment[/code] and [code]Light[/code] "
-"visual shaders."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarDerivativeFunc.xml
-msgid "The derivative type. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarDerivativeFunc.xml
-#: doc/classes/VisualShaderNodeVectorDerivativeFunc.xml
-msgid "Sum of absolute derivative in [code]x[/code] and [code]y[/code]."
-msgstr "Summe der absoluten Ableitung in [code]x[/code] und [code]y[/code]."
-
-#: doc/classes/VisualShaderNodeScalarDerivativeFunc.xml
-#: doc/classes/VisualShaderNodeVectorDerivativeFunc.xml
-msgid "Derivative in [code]x[/code] using local differencing."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarDerivativeFunc.xml
-#: doc/classes/VisualShaderNodeVectorDerivativeFunc.xml
-msgid "Derivative in [code]y[/code] using local differencing."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarInterp.xml
-msgid ""
-"Linearly interpolates between two scalars within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarInterp.xml
-msgid "Translates to [code]mix(a, b, weight)[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarSmoothStep.xml
-msgid "Calculates a scalar SmoothStep function within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarSmoothStep.xml
-msgid ""
-"Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader "
-"language.\n"
-"Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/"
-"code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/"
-"code]. Otherwise the return value is interpolated between [code]0.0[/code] "
-"and [code]1.0[/code] using Hermite polynomials."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarSwitch.xml
-msgid "A boolean/scalar function for use within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarSwitch.xml
-msgid ""
-"Returns an associated scalar if the provided boolean value is [code]true[/"
-"code] or [code]false[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid ""
-"A hint applied to the uniform, which controls the values it can take when "
-"set through the inspector."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid ""
-"Minimum value for range hints. Used if [member hint] is set to [constant "
-"HINT_RANGE] or [constant HINT_RANGE_STEP]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid ""
-"Maximum value for range hints. Used if [member hint] is set to [constant "
-"HINT_RANGE] or [constant HINT_RANGE_STEP]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid ""
-"Step (increment) value for the range hint with step. Used if [member hint] "
-"is set to [constant HINT_RANGE_STEP]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid "No hint used."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid ""
-"A range hint for scalar value, which limits possible input values between "
-"[member min] and [member max]. Translated to [code]hint_range(min, max)[/"
-"code] in shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-msgid ""
-"A range hint for scalar value with step, which limits possible input values "
-"between [member min] and [member max], with a step (increment) of [member "
-"step]). Translated to [code]hint_range(min, max, step)[/code] in shader code."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeScalarUniform.xml
-#, fuzzy
-msgid "Represents the size of the [enum Hint] enum."
-msgstr "Stellt die Größe dar des [enum Variant.Type] enum."
-
-#: doc/classes/VisualShaderNodeSwitch.xml
-msgid "A boolean/vector function for use within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeSwitch.xml
-msgid ""
-"Returns an associated vector if the provided boolean value is [code]true[/"
-"code] or [code]false[/code]."
-msgstr ""
-"Gibt einen zugehörigen Vektor zurück, wenn der übergebene boolesche Wert "
-"[code]true[/code] oder [code]false[/code] ist."
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Performs a texture lookup within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid ""
-"Performs a lookup operation on the provided texture, with support for "
-"multiple texture sources to choose from."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Determines the source for the lookup. See [enum Source] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "The source texture, if needed for the selected [member source]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid ""
-"Specifies the type of the texture if [member source] is set to [constant "
-"SOURCE_TEXTURE]. See [enum TextureType] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Use the texture given as an argument for this function."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Use the current viewport's texture as the source."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid ""
-"Use the texture from this shader's texture built-in (e.g. a texture of a "
-"[Sprite])."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Use the texture from this shader's normal map built-in."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Use the depth texture available for this shader."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTexture.xml
-msgid "Use the texture provided in the input port for this function."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid "Performs a uniform texture lookup within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid ""
-"Performs a lookup operation on the texture provided as a uniform for the "
-"shader."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid "Sets the default color if no texture is assigned to the uniform."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid ""
-"Adds [code]hint_aniso[/code] as hint to the uniform declaration to use for a "
-"flowmap."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid "Defaults to white color."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniform.xml
-msgid "Defaults to black color."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniformTriplanar.xml
-msgid ""
-"Performs a uniform texture lookup with triplanar within the visual shader "
-"graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTextureUniformTriplanar.xml
-msgid ""
-"Performs a lookup operation on the texture provided as a uniform for the "
-"shader, with support for triplanar mapping."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformCompose.xml
-msgid ""
-"Composes a [Transform] from four [Vector3]s within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformCompose.xml
-msgid ""
-"Creates a 4x4 transform matrix using four vectors of type [code]vec3[/code]. "
-"Each vector is one row in the matrix and the last column is a [code]vec4(0, "
-"0, 0, 1)[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformConstant.xml
-msgid "A [Transform] constant for use within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformConstant.xml
-msgid "A constant [Transform], which can be used as an input node."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformConstant.xml
-msgid "A [Transform] constant which represents the state of this node."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformDecompose.xml
-msgid ""
-"Decomposes a [Transform] into four [Vector3]s within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformDecompose.xml
-msgid ""
-"Takes a 4x4 transform matrix and decomposes it into four [code]vec3[/code] "
-"values, one from each row of the matrix."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformFunc.xml
-msgid "Computes a [Transform] function within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformFunc.xml
-msgid "Computes an inverse or transpose function on the provided [Transform]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformFunc.xml
-msgid "The function to be computed. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformFunc.xml
-msgid "Perform the inverse operation on the [Transform] matrix."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformFunc.xml
-msgid "Perform the transpose operation on the [Transform] matrix."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid "Multiplies [Transform] by [Transform] within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid ""
-"A multiplication operation on two transforms (4x4 matrices), with support "
-"for different multiplication operators."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid ""
-"The multiplication type to be performed on the transforms. See [enum "
-"Operator] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid "Multiplies transform [code]a[/code] by the transform [code]b[/code]."
-msgstr ""
-"Multipliziert die Transformation [code]a[/code] mit der Transformation "
-"[code]b[/code]."
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid "Multiplies transform [code]b[/code] by the transform [code]a[/code]."
-msgstr ""
-"Multipliziert die Transformation [code]b[/code] mit der Transformation "
-"[code]a[/code]."
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid ""
-"Performs a component-wise multiplication of transform [code]a[/code] by the "
-"transform [code]b[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformMult.xml
-msgid ""
-"Performs a component-wise multiplication of transform [code]b[/code] by the "
-"transform [code]a[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformUniform.xml
-msgid "A [Transform] uniform for use within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformUniform.xml
-msgid "Translated to [code]uniform mat4[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid ""
-"Multiplies a [Transform] and a [Vector3] within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid ""
-"A multiplication operation on a transform (4x4 matrix) and a vector, with "
-"support for different multiplication operators."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid ""
-"The multiplication type to be performed. See [enum Operator] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid "Multiplies transform [code]a[/code] by the vector [code]b[/code]."
-msgstr ""
-"Multipliziert die Transformation [code]a[/code] mit dem Vektor [code]b[/"
-"code]."
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid "Multiplies vector [code]b[/code] by the transform [code]a[/code]."
-msgstr ""
-"Multipliziert den Vektor [code]b[/code] mit der Transformation [code]a[/"
-"code]."
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid ""
-"Multiplies transform [code]a[/code] by the vector [code]b[/code], skipping "
-"the last row and column of the transform."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeTransformVecMult.xml
-msgid ""
-"Multiplies vector [code]b[/code] by the transform [code]a[/code], skipping "
-"the last row and column of the transform."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeUniform.xml
-msgid "A base type for the uniforms within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeUniform.xml
-msgid ""
-"A uniform represents a variable in the shader which is set externally, i.e. "
-"from the [ShaderMaterial]. Uniforms are exposed as properties in the "
-"[ShaderMaterial] and can be assigned from the inspector or from a script."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeUniform.xml
-msgid ""
-"Name of the uniform, by which it can be accessed through the "
-"[ShaderMaterial] properties."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeUniformRef.xml
-msgid "A reference to an existing [VisualShaderNodeUniform]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeUniformRef.xml
-msgid ""
-"Creating a reference to a [VisualShaderNodeUniform] allows you to reuse this "
-"uniform in different shaders or shader stages easily."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeUniformRef.xml
-msgid "The name of the uniform which this reference points to."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVec3Constant.xml
-msgid "A [Vector3] constant to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVec3Constant.xml
-msgid "A constant [Vector3], which can be used as an input node."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVec3Constant.xml
-msgid "A [Vector3] constant which represents the state of this node."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVec3Uniform.xml
-msgid "A [Vector3] uniform to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVec3Uniform.xml
-msgid "Translated to [code]uniform vec3[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorClamp.xml
-msgid "Clamps a vector value within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorClamp.xml
-msgid ""
-"Constrains a value to lie between [code]min[/code] and [code]max[/code] "
-"values. The operation is performed on each component of the vector "
-"individually."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorCompose.xml
-msgid "Composes a [Vector3] from three scalars within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorCompose.xml
-msgid ""
-"Creates a [code]vec3[/code] using three scalar values that can be provided "
-"from separate inputs."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorDecompose.xml
-msgid ""
-"Decomposes a [Vector3] into three scalars within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorDecompose.xml
-msgid ""
-"Takes a [code]vec3[/code] and decomposes it into three scalar values that "
-"can be used as separate inputs."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorDerivativeFunc.xml
-msgid "Calculates a vector derivative within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorDerivativeFunc.xml
-msgid "A derivative type. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorDistance.xml
-msgid ""
-"Returns the distance between two points. To be used within the visual shader "
-"graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorDistance.xml
-msgid ""
-"Calculates distance from point represented by vector [code]p0[/code] to "
-"vector [code]p1[/code].\n"
-"Translated to [code]distance(p0, p1)[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "A vector function to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "A visual shader node able to perform different functions using vectors."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "The function to be performed. See [enum Function] for options."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid ""
-"Normalizes the vector so that it has a length of [code]1[/code] but points "
-"in the same direction."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Clamps the value between [code]0.0[/code] and [code]1.0[/code]."
-msgstr ""
-"Bindet den Wert im Zahlenbereich von [code]0.0[/code] und [code]1.0[/code]."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the opposite value of the parameter."
-msgstr "Gibt den inversen Wert des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns [code]1/vector[/code]."
-msgstr "Gibt [code]1/vector[/code] zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Converts RGB vector to HSV equivalent."
-msgstr "Wandelt RGB-Vektor in HSV-Gegenwert um."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Converts HSV vector to RGB equivalent."
-msgstr "Wandelt HSV-Vektor in RGB-Gegenwert um."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the absolute value of the parameter."
-msgstr "Gibt den absoluten Betrag des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the arc-cosine of the parameter."
-msgstr "Gibt den Arkuskosinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the inverse hyperbolic cosine of the parameter."
-msgstr "Gibt den inversen hyperbolischen Kosinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the arc-sine of the parameter."
-msgstr "Gibt den Arkussinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the inverse hyperbolic sine of the parameter."
-msgstr "Gibt den inversen hyperbolischen Sinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the arc-tangent of the parameter."
-msgstr "Gibt den Arkustangens des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the inverse hyperbolic tangent of the parameter."
-msgstr "Gibt den inversen hyperbolischen Tangens des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid ""
-"Finds the nearest integer that is greater than or equal to the parameter."
-msgstr "Gibt die nächste Ganzzahl größer gleich dem Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the cosine of the parameter."
-msgstr "Gibt den Kosinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the hyperbolic cosine of the parameter."
-msgstr "Gibt den hyperbolischen Kosinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Converts a quantity in radians to degrees."
-msgstr "Wandelt einen Wert von Bogenmaß zu Grad um."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Base-e Exponential."
-msgstr "Basis-e exponentiell."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Base-2 Exponential."
-msgstr "Basis-2 exponentiell."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Finds the nearest integer less than or equal to the parameter."
-msgstr "Gibt die nächste Ganzzahl kleiner gleich dem Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Computes the fractional part of the argument."
-msgstr "Berechnet den Bruchteil des Parameters."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the inverse of the square root of the parameter."
-msgstr "Gibt die inverse Quadratwurzel des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Natural logarithm."
-msgstr "Natürlicher Logarithmus."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Base-2 logarithm."
-msgstr "Basis-2 Logarithmus."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Converts a quantity in degrees to radians."
-msgstr "Wandelt einen Wert von Grad zu Bogenmaß um."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Finds the nearest integer to the parameter."
-msgstr "Gibt die nächste Ganzzahl vom Parameter zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Finds the nearest even integer to the parameter."
-msgstr "Gibt die nächste gerade Ganzzahl vom Parameter zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid ""
-"Extracts the sign of the parameter, i.e. returns [code]-1[/code] if the "
-"parameter is negative, [code]1[/code] if it's positive and [code]0[/code] "
-"otherwise."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the sine of the parameter."
-msgstr "Gibt den Sinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the hyperbolic sine of the parameter."
-msgstr "Gibt den hyperbolischen Sinus des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the square root of the parameter."
-msgstr "Gibt die Quadratwurzel des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the tangent of the parameter."
-msgstr "Gibt den Tangens des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns the hyperbolic tangent of the parameter."
-msgstr "Gibt den hyperbolischen Tangens des Parameters zurück."
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid ""
-"Returns a value equal to the nearest integer to the parameter whose absolute "
-"value is not larger than the absolute value of the parameter."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorFunc.xml
-msgid "Returns [code]1.0 - vector[/code]."
-msgstr "Gibt [code]1.0 - vector[/code] zurück."
-
-#: doc/classes/VisualShaderNodeVectorInterp.xml
-msgid ""
-"Linearly interpolates between two vectors within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorInterp.xml
-msgid ""
-"Translates to [code]mix(a, b, weight)[/code] in the shader language, where "
-"[code]weight[/code] is a [Vector3] with weights for each component."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorLen.xml
-msgid "Returns the length of a [Vector3] within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorLen.xml
-msgid "Translated to [code]length(p0)[/code] in the shader language."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "A vector operator to be used within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid ""
-"A visual shader node for use of vector operators. Operates on vector "
-"[code]a[/code] and vector [code]b[/code]."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "The operator to be used. See [enum Operator] for options."
-msgstr "Der operator, der benutzt wird. Siehe [enum Operator] für Optionen."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Adds two vectors."
-msgstr "Addiert zwei Vektoren."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Subtracts a vector from a vector."
-msgstr "Subtrahiert Vektor von Vektor."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Multiplies two vectors."
-msgstr "Multipliziert zwei Vektoren."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Divides vector by vector."
-msgstr "Teilt Vektor durch Vektor."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Returns the remainder of the two vectors."
-msgstr "Gibt den Rest einer Division zweier Vektoren zurück."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid ""
-"Returns the value of the first parameter raised to the power of the second, "
-"for each component of the vectors."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Returns the greater of two values, for each component of the vectors."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Returns the lesser of two values, for each component of the vectors."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Calculates the cross product of two vectors."
-msgstr "Berechnet das Kreuzprodukt zweier Vektoren."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid "Returns the arc-tangent of the parameters."
-msgstr "Gibt den Arkuskosinus2 der Parameter zurück."
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid ""
-"Returns the vector that points in the direction of reflection. [code]a[/"
-"code] is incident vector and [code]b[/code] is the normal vector."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorOp.xml
-msgid ""
-"Vector step operator. Returns [code]0.0[/code] if [code]a[/code] is smaller "
-"than [code]b[/code] and [code]1.0[/code] otherwise."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorRefract.xml
-msgid ""
-"Returns the [Vector3] that points in the direction of refraction. For use "
-"within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorRefract.xml
-msgid ""
-"Translated to [code]refract(I, N, eta)[/code] in the shader language, where "
-"[code]I[/code] is the incident vector, [code]N[/code] is the normal vector "
-"and [code]eta[/code] is the ratio of the indices of the refraction."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorScalarMix.xml
-msgid ""
-"Linearly interpolates between two vectors using a scalar. For use within the "
-"visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorScalarMix.xml
-msgid ""
-"Translates to [code]mix(a, b, weight)[/code] in the shader language, where "
-"[code]a[/code] and [code]b[/code] are vectors and [code]weight[/code] is a "
-"scalar."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorScalarSmoothStep.xml
-msgid ""
-"Calculates a vector SmoothStep function using scalar within the visual "
-"shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorScalarSmoothStep.xml
-msgid ""
-"Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader "
-"language, where [code]x[/code] is a scalar.\n"
-"Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/"
-"code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/"
-"code]. Otherwise the return value is interpolated between [code]0.0[/code] "
-"and [code]1.0[/code] using Hermite polynomials."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorScalarStep.xml
-msgid "Calculates a vector Step function within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorScalarStep.xml
-msgid ""
-"Translates to [code]step(edge, x)[/code] in the shader language.\n"
-"Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge[/code] "
-"and [code]1.0[/code] otherwise."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorSmoothStep.xml
-msgid "Calculates a vector SmoothStep function within the visual shader graph."
-msgstr ""
-
-#: doc/classes/VisualShaderNodeVectorSmoothStep.xml
-msgid ""
-"Translates to [code]smoothstep(edge0, edge1, x)[/code] in the shader "
-"language, where [code]x[/code] is a vector.\n"
-"Returns [code]0.0[/code] if [code]x[/code] is smaller than [code]edge0[/"
-"code] and [code]1.0[/code] if [code]x[/code] is larger than [code]edge1[/"
-"code]. Otherwise the return value is interpolated between [code]0.0[/code] "
-"and [code]1.0[/code] using Hermite polynomials."
-msgstr ""
-
-#: doc/classes/VScrollBar.xml
-msgid "Vertical scroll bar."
-msgstr ""
-
-#: doc/classes/VScrollBar.xml
-msgid ""
-"Vertical version of [ScrollBar], which goes from top (min) to bottom (max)."
-msgstr ""
-
-#: doc/classes/VScrollBar.xml
-msgid ""
-"Icon used as a button to scroll the [ScrollBar] up. Supports custom step "
-"using the [member ScrollBar.custom_step] property."
-msgstr ""
-
-#: doc/classes/VScrollBar.xml
-msgid ""
-"Icon used as a button to scroll the [ScrollBar] down. Supports custom step "
-"using the [member ScrollBar.custom_step] property."
-msgstr ""
-
-#: doc/classes/VSeparator.xml
-msgid "Vertical version of [Separator]."
-msgstr ""
-
-#: doc/classes/VSeparator.xml
-msgid ""
-"Vertical version of [Separator]. Even though it looks vertical, it is used "
-"to separate objects horizontally."
-msgstr ""
-
-#: doc/classes/VSeparator.xml
-msgid ""
-"The width of the area covered by the separator. Effectively works like a "
-"minimum width."
-msgstr ""
-
-#: doc/classes/VSeparator.xml
-msgid ""
-"The style for the separator line. Works best with [StyleBoxLine] (remember "
-"to enable [member StyleBoxLine.vertical])."
-msgstr ""
-
-#: doc/classes/VSlider.xml
-msgid "Vertical slider."
-msgstr ""
-
-#: doc/classes/VSlider.xml
-msgid ""
-"Vertical slider. See [Slider]. This one goes from bottom (min) to top "
-"(max).\n"
-"[b]Note:[/b] The [signal Range.changed] and [signal Range.value_changed] "
-"signals are part of the [Range] class which this class inherits from."
-msgstr ""
-
-#: doc/classes/VSlider.xml
-msgid "The background of the area below the grabber."
-msgstr ""
-
-#: doc/classes/VSlider.xml
-msgid ""
-"The background for the whole slider. Determines the width of the "
-"[code]grabber_area[/code]."
-msgstr ""
-
-#: doc/classes/VSplitContainer.xml
-msgid "Vertical split container."
-msgstr ""
-
-#: doc/classes/VSplitContainer.xml
-msgid ""
-"Vertical split container. See [SplitContainer]. This goes from top to bottom."
-msgstr ""
-
-#: doc/classes/WeakRef.xml
-msgid ""
-"Holds an [Object], but does not contribute to the reference count if the "
-"object is a reference."
-msgstr ""
-
-#: doc/classes/WeakRef.xml
-msgid ""
-"A weakref can hold a [Reference], without contributing to the reference "
-"counter. A weakref can be created from an [Object] using [method @GDScript."
-"weakref]. If this object is not a reference, weakref still works, however, "
-"it does not have any effect on the object. Weakrefs are useful in cases "
-"where multiple classes have variables that refer to each other. Without "
-"weakrefs, using these classes could lead to memory leaks, since both "
-"references keep each other from being released. Making part of the variables "
-"a weakref can prevent this cyclic dependency, and allows the references to "
-"be released."
-msgstr ""
-
-#: doc/classes/WeakRef.xml
-msgid ""
-"Returns the [Object] this weakref is referring to. Returns [code]null[/code] "
-"if that object no longer exists."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "Closes this data channel, notifying the other peer."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-#, fuzzy
-msgid ""
-"Returns the number of bytes currently queued to be sent over this channel."
-msgstr "Gibt die Anzahl der Dreiecke im Überblendungsbereich zurück."
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns the id assigned to this channel during creation (or auto-assigned "
-"during negotiation).\n"
-"If the channel is not negotiated out-of-band the id will only be available "
-"after the connection is established (will return [code]65535[/code] until "
-"then)."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "Returns the label assigned to this channel during creation."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns the [code]maxPacketLifeTime[/code] value assigned to this channel "
-"during creation.\n"
-"Will be [code]65535[/code] if not specified."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns the [code]maxRetransmits[/code] value assigned to this channel "
-"during creation.\n"
-"Will be [code]65535[/code] if not specified."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns the sub-protocol assigned to this channel during creation. An empty "
-"string if not specified."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "Returns the current state of this channel, see [enum ChannelState]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns [code]true[/code] if this channel was created with out-of-band "
-"configuration."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns [code]true[/code] if this channel was created with ordering enabled "
-"(default)."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "Reserved, but not used for now."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Returns [code]true[/code] if the last received packet was transferred as "
-"text. See [member write_mode]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"The transfer mode to use when sending outgoing packet. Either text or binary."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Tells the channel to send data over this channel as text. An external peer "
-"(non-Godot) would receive this as a string."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"Tells the channel to send data over this channel as binary. An external peer "
-"(non-Godot) would receive this as array buffer or blob."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "The channel was created, but it's still trying to connect."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "The channel is currently open, and data can flow over it."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid ""
-"The channel is being closed, no new messages will be accepted, but those "
-"already in queue will be flushed."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCDataChannel.xml
-msgid "The channel was closed, or connection failed."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"A simple interface to create a peer-to-peer mesh network composed of "
-"[WebRTCPeerConnection] that is compatible with the [MultiplayerAPI]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"This class constructs a full mesh of [WebRTCPeerConnection] (one connection "
-"for each peer) that can be used as a [member MultiplayerAPI.network_peer].\n"
-"You can add each [WebRTCPeerConnection] via [method add_peer] or remove them "
-"via [method remove_peer]. Peers must be added in [constant "
-"WebRTCPeerConnection.STATE_NEW] state to allow it to create the appropriate "
-"channels. This class will not create offers nor set descriptions, it will "
-"only poll them, and notify connections and disconnections.\n"
-"[signal NetworkedMultiplayerPeer.connection_succeeded] and [signal "
-"NetworkedMultiplayerPeer.server_disconnected] will not be emitted unless "
-"[code]server_compatibility[/code] is [code]true[/code] in [method "
-"initialize]. Beside that data transfer works like in a "
-"[NetworkedMultiplayerPeer]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"Add a new peer to the mesh with the given [code]peer_id[/code]. The "
-"[WebRTCPeerConnection] must be in state [constant WebRTCPeerConnection."
-"STATE_NEW].\n"
-"Three channels will be created for reliable, unreliable, and ordered "
-"transport. The value of [code]unreliable_lifetime[/code] will be passed to "
-"the [code]maxPacketLifetime[/code] option when creating unreliable and "
-"ordered channels (see [method WebRTCPeerConnection.create_data_channel])."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid "Close all the add peer connections and channels, freeing all resources."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"Return a dictionary representation of the peer with given [code]peer_id[/"
-"code] with three keys. [code]connection[/code] containing the "
-"[WebRTCPeerConnection] to this peer, [code]channels[/code] an array of three "
-"[WebRTCDataChannel], and [code]connected[/code] a boolean representing if "
-"the peer connection is currently connected (all three channels are open)."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"Returns a dictionary which keys are the peer ids and values the peer "
-"representation as in [method get_peer]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"Returns [code]true[/code] if the given [code]peer_id[/code] is in the peers "
-"map (it might not be connected though)."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"Initialize the multiplayer peer with the given [code]peer_id[/code] (must be "
-"between 1 and 2147483647).\n"
-"If [code]server_compatibilty[/code] is [code]false[/code] (default), the "
-"multiplayer peer will be immediately in state [constant "
-"NetworkedMultiplayerPeer.CONNECTION_CONNECTED] and [signal "
-"NetworkedMultiplayerPeer.connection_succeeded] will not be emitted.\n"
-"If [code]server_compatibilty[/code] is [code]true[/code] the peer will "
-"suppress all [signal NetworkedMultiplayerPeer.peer_connected] signals until "
-"a peer with id [constant NetworkedMultiplayerPeer.TARGET_PEER_SERVER] "
-"connects and then emit [signal NetworkedMultiplayerPeer."
-"connection_succeeded]. After that the signal [signal "
-"NetworkedMultiplayerPeer.peer_connected] will be emitted for every already "
-"connected peer, and any new peer that might connect. If the server peer "
-"disconnects after that, signal [signal NetworkedMultiplayerPeer."
-"server_disconnected] will be emitted and state will become [constant "
-"NetworkedMultiplayerPeer.CONNECTION_CONNECTED]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCMultiplayer.xml
-msgid ""
-"Remove the peer with given [code]peer_id[/code] from the mesh. If the peer "
-"was connected, and [signal NetworkedMultiplayerPeer.peer_connected] was "
-"emitted for it, then [signal NetworkedMultiplayerPeer.peer_disconnected] "
-"will be emitted."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid "Interface to a WebRTC peer connection."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"A WebRTC connection between the local computer and a remote peer. Provides "
-"an interface to connect, maintain and monitor the connection.\n"
-"Setting up a WebRTC connection between two peers from now on) may not seem a "
-"trivial task, but it can be broken down into 3 main steps:\n"
-"- The peer that wants to initiate the connection ([code]A[/code] from now "
-"on) creates an offer and send it to the other peer ([code]B[/code] from now "
-"on).\n"
-"- [code]B[/code] receives the offer, generate and answer, and sends it to "
-"[code]A[/code]).\n"
-"- [code]A[/code] and [code]B[/code] then generates and exchange ICE "
-"candidates with each other.\n"
-"After these steps, the connection should become connected. Keep on reading "
-"or look into the tutorial for more information."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Add an ice candidate generated by a remote peer (and received over the "
-"signaling server). See [signal ice_candidate_created]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Close the peer connection and all data channels associated with it.\n"
-"[b]Note:[/b] You cannot reuse this object for a new connection unless you "
-"call [method initialize]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Returns a new [WebRTCDataChannel] (or [code]null[/code] on failure) with "
-"given [code]label[/code] and optionally configured via the [code]options[/"
-"code] dictionary. This method can only be called when the connection is in "
-"state [constant STATE_NEW].\n"
-"There are two ways to create a working data channel: either call [method "
-"create_data_channel] on only one of the peer and listen to [signal "
-"data_channel_received] on the other, or call [method create_data_channel] on "
-"both peers, with the same values, and the [code]negotiated[/code] option set "
-"to [code]true[/code].\n"
-"Valid [code]options[/code] are:\n"
-"[codeblock]\n"
-"{\n"
-"    \"negotiated\": true, # When set to true (default off), means the "
-"channel is negotiated out of band. \"id\" must be set too. "
-"\"data_channel_received\" will not be called.\n"
-"    \"id\": 1, # When \"negotiated\" is true this value must also be set to "
-"the same value on both peer.\n"
-"\n"
-"    # Only one of maxRetransmits and maxPacketLifeTime can be specified, not "
-"both. They make the channel unreliable (but also better at real time).\n"
-"    \"maxRetransmits\": 1, # Specify the maximum number of attempt the peer "
-"will make to retransmits packets if they are not acknowledged.\n"
-"    \"maxPacketLifeTime\": 100, # Specify the maximum amount of time before "
-"giving up retransmitions of unacknowledged packets (in milliseconds).\n"
-"    \"ordered\": true, # When in unreliable mode (i.e. either "
-"\"maxRetransmits\" or \"maxPacketLifetime\" is set), \"ordered\" (true by "
-"default) specify if packet ordering is to be enforced.\n"
-"\n"
-"    \"protocol\": \"my-custom-protocol\", # A custom sub-protocol string for "
-"this channel.\n"
-"}\n"
-"[/codeblock]\n"
-"[b]Note:[/b] You must keep a reference to channels created this way, or it "
-"will be closed."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Creates a new SDP offer to start a WebRTC connection with a remote peer. At "
-"least one [WebRTCDataChannel] must have been created before calling this "
-"method.\n"
-"If this functions returns [constant OK], [signal "
-"session_description_created] will be called when the session is ready to be "
-"sent."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid "Returns the connection state. See [enum ConnectionState]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Re-initialize this peer connection, closing any previously active "
-"connection, and going back to state [constant STATE_NEW]. A dictionary of "
-"[code]options[/code] can be passed to configure the peer connection.\n"
-"Valid [code]options[/code] are:\n"
-"[codeblock]\n"
-"{\n"
-"    \"iceServers\": [\n"
-"        {\n"
-"            \"urls\": [ \"stun:stun.example.com:3478\" ], # One or more STUN "
-"servers.\n"
-"        },\n"
-"        {\n"
-"            \"urls\": [ \"turn:turn.example.com:3478\" ], # One or more TURN "
-"servers.\n"
-"            \"username\": \"a_username\", # Optional username for the TURN "
-"server.\n"
-"            \"credential\": \"a_password\", # Optional password for the TURN "
-"server.\n"
-"        }\n"
-"    ]\n"
-"}\n"
-"[/codeblock]"
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Call this method frequently (e.g. in [method Node._process] or [method Node."
-"_physics_process]) to properly receive signals."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Sets the SDP description of the local peer. This should be called in "
-"response to [signal session_description_created].\n"
-"After calling this function the peer will start emitting [signal "
-"ice_candidate_created] (unless an [enum Error] different from [constant OK] "
-"is returned)."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Sets the SDP description of the remote peer. This should be called with the "
-"values generated by a remote peer and received over the signaling server.\n"
-"If [code]type[/code] is [code]offer[/code] the peer will emit [signal "
-"session_description_created] with the appropriate answer.\n"
-"If [code]type[/code] is [code]answer[/code] the peer will start emitting "
-"[signal ice_candidate_created]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Emitted when a new in-band channel is received, i.e. when the channel was "
-"created with [code]negotiated: false[/code] (default).\n"
-"The object will be an instance of [WebRTCDataChannel]. You must keep a "
-"reference of it or it will be closed automatically. See [method "
-"create_data_channel]."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Emitted when a new ICE candidate has been created. The three parameters are "
-"meant to be passed to the remote peer over the signaling server."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"Emitted after a successful call to [method create_offer] or [method "
-"set_remote_description] (when it generates an answer). The parameters are "
-"meant to be passed to [method set_local_description] on this object, and "
-"sent to the remote peer over the signaling server."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"The connection is new, data channels and an offer can be created in this "
-"state."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"The peer is connecting, ICE is in progress, none of the transports has "
-"failed."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid "The peer is connected, all ICE transports are connected."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid "At least one ICE transport is disconnected."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid "One or more of the ICE transports failed."
-msgstr ""
-
-#: modules/webrtc/doc_classes/WebRTCPeerConnection.xml
-msgid ""
-"The peer connection is closed (after calling [method close] for example)."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid "A WebSocket client implementation."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"This class implements a WebSocket client compatible with any RFC 6455-"
-"compliant WebSocket server.\n"
-"This client can be optionally used as a network peer for the "
-"[MultiplayerAPI].\n"
-"After starting the client ([method connect_to_url]), you will need to "
-"[method NetworkedMultiplayerPeer.poll] it at regular intervals (e.g. inside "
-"[method Node._process]).\n"
-"You will receive appropriate signals when connecting, disconnecting, or when "
-"new data is available."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"Connects to the given URL requesting one of the given [code]protocols[/code] "
-"as sub-protocol. If the list empty (default), no sub-protocol will be "
-"requested.\n"
-"If [code]true[/code] is passed as [code]gd_mp_api[/code], the client will "
-"behave like a network peer for the [MultiplayerAPI], connections to non-"
-"Godot servers will not work, and [signal data_received] will not be "
-"emitted.\n"
-"If [code]false[/code] is passed instead (default), you must call "
-"[PacketPeer] functions ([code]put_packet[/code], [code]get_packet[/code], "
-"etc.) on the [WebSocketPeer] returned via [code]get_peer(1)[/code] and not "
-"on this object directly (e.g. [code]get_peer(1).put_packet(data)[/code]).\n"
-"You can optionally pass a list of [code]custom_headers[/code] to be added to "
-"the handshake HTTP request.\n"
-"[b]Note:[/b] To avoid mixed content warnings or errors in HTML5, you may "
-"have to use a [code]url[/code] that starts with [code]wss://[/code] (secure) "
-"instead of [code]ws://[/code]. When doing so, make sure to use the fully "
-"qualified domain name that matches the one defined in the server's SSL "
-"certificate. Do not connect directly via the IP address for [code]wss://[/"
-"code] connections, as it won't match with the SSL certificate.\n"
-"[b]Note:[/b] Specifying [code]custom_headers[/code] is not supported in "
-"HTML5 exports due to browsers restrictions."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"Disconnects this client from the connected host. See [method WebSocketPeer."
-"close] for more information."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid "Return the IP address of the currently connected host."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid "Return the IP port of the currently connected host."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"If specified, this [X509Certificate] will be the only one accepted when "
-"connecting to an SSL host. Any other certificate provided by the server will "
-"be regarded as invalid.\n"
-"[b]Note:[/b] Specifying a custom [code]trusted_ssl_certificate[/code] is not "
-"supported in HTML5 exports due to browsers restrictions."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"If [code]true[/code], SSL certificate verification is enabled.\n"
-"[b]Note:[/b] You must specify the certificates to be used in the Project "
-"Settings for it to work when exported."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"Emitted when the connection to the server is closed. [code]was_clean_close[/"
-"code] will be [code]true[/code] if the connection was shutdown cleanly."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid "Emitted when the connection to the server fails."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"Emitted when a connection with the server is established, [code]protocol[/"
-"code] will contain the sub-protocol agreed with the server."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"Emitted when a WebSocket message is received.\n"
-"[b]Note:[/b] This signal is [i]not[/i] emitted when used as high-level "
-"multiplayer peer."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketClient.xml
-msgid ""
-"Emitted when the server requests a clean close. You should keep polling "
-"until you get a [signal connection_closed] signal to achieve the clean "
-"close. See [method WebSocketPeer.close] for more details."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketMultiplayerPeer.xml
-msgid "Base class for WebSocket server and client."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketMultiplayerPeer.xml
-msgid ""
-"Base class for WebSocket server and client, allowing them to be used as "
-"network peer for the [MultiplayerAPI]."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketMultiplayerPeer.xml
-msgid ""
-"Returns the [WebSocketPeer] associated to the given [code]peer_id[/code]."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketMultiplayerPeer.xml
-msgid ""
-"Configures the buffer sizes for this WebSocket peer. Default values can be "
-"specified in the Project Settings under [code]network/limits[/code]. For "
-"server, values are meant per connected peer.\n"
-"The first two parameters define the size and queued packets limits of the "
-"input buffer, the last two of the output buffer.\n"
-"Buffer sizes are expressed in KiB, so [code]4 = 2^12 = 4096 bytes[/code]. "
-"All parameters will be rounded up to the nearest power of two.\n"
-"[b]Note:[/b] HTML5 exports only use the input buffer since the output one is "
-"managed by browsers."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketMultiplayerPeer.xml
-msgid ""
-"Emitted when a packet is received from a peer.\n"
-"[b]Note:[/b] This signal is only emitted when the client or server is "
-"configured to use Godot multiplayer API."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid "A class representing a specific WebSocket connection."
-msgstr "Eine Klasse die eine spezifische WebSocket-Verbindung repräsentiert."
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"This class represents a specific WebSocket connection, allowing you to do "
-"lower level operations with it.\n"
-"You can choose to write to the socket in binary or text mode, and you can "
-"recognize the mode used for writing by the other peer."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Closes this WebSocket connection. [code]code[/code] is the status code for "
-"the closure (see RFC 6455 section 7.4 for a list of valid status codes). "
-"[code]reason[/code] is the human readable reason for closing the connection "
-"(can be any UTF-8 string that's smaller than 123 bytes).\n"
-"[b]Note:[/b] To achieve a clean close, you will need to keep polling until "
-"either [signal WebSocketClient.connection_closed] or [signal WebSocketServer."
-"client_disconnected] is received.\n"
-"[b]Note:[/b] The HTML5 export might not support all status codes. Please "
-"refer to browser-specific documentation for more details."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Returns the IP address of the connected peer.\n"
-"[b]Note:[/b] Not available in the HTML5 export."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Returns the remote port of the connected peer.\n"
-"[b]Note:[/b] Not available in the HTML5 export."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Returns the current amount of data in the outbound websocket buffer. [b]Note:"
-"[/b] HTML5 exports use WebSocket.bufferedAmount, while other platforms use "
-"an internal buffer."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid "Gets the current selected write mode. See [enum WriteMode]."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid "Returns [code]true[/code] if this peer is currently connected."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Disable Nagle's algorithm on the underling TCP socket (default). See [method "
-"StreamPeerTCP.set_no_delay] for more information.\n"
-"[b]Note:[/b] Not available in the HTML5 export."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid "Sets the socket to use the given [enum WriteMode]."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Returns [code]true[/code] if the last received packet was sent as a text "
-"payload. See [enum WriteMode]."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Specifies that WebSockets messages should be transferred as text payload "
-"(only valid UTF-8 is allowed)."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketPeer.xml
-msgid ""
-"Specifies that WebSockets messages should be transferred as binary payload "
-"(any byte combination is allowed)."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid "A WebSocket server implementation."
-msgstr "Eine WebSocket Server Implementierung."
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"This class implements a WebSocket server that can also support the high-"
-"level multiplayer API.\n"
-"After starting the server ([method listen]), you will need to [method "
-"NetworkedMultiplayerPeer.poll] it at regular intervals (e.g. inside [method "
-"Node._process]). When clients connect, disconnect, or send data, you will "
-"receive the appropriate signal.\n"
-"[b]Note:[/b] Not available in HTML5 exports."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Disconnects the peer identified by [code]id[/code] from the server. See "
-"[method WebSocketPeer.close] for more information."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid "Returns [code]true[/code] if a peer with the given ID is connected."
-msgstr ""
-"Gibt [code]true[/code] zurück, wenn ein Peer mir der angegebenen ID "
-"verbunden ist."
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Returns [code]true[/code] if the server is actively listening on a port."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Starts listening on the given port.\n"
-"You can specify the desired subprotocols via the \"protocols\" array. If the "
-"list empty (default), no sub-protocol will be requested.\n"
-"If [code]true[/code] is passed as [code]gd_mp_api[/code], the server will "
-"behave like a network peer for the [MultiplayerAPI], connections from non-"
-"Godot clients will not work, and [signal data_received] will not be "
-"emitted.\n"
-"If [code]false[/code] is passed instead (default), you must call "
-"[PacketPeer] functions ([code]put_packet[/code], [code]get_packet[/code], "
-"etc.), on the [WebSocketPeer] returned via [code]get_peer(id)[/code] to "
-"communicate with the peer with given [code]id[/code] (e.g. "
-"[code]get_peer(id).get_available_packet_count[/code])."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Sets additional headers to be sent to clients during the HTTP handshake."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid "Stops the server and clear its state."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"When not set to [code]*[/code] will restrict incoming connections to the "
-"specified IP address. Setting [code]bind_ip[/code] to [code]127.0.0.1[/code] "
-"will cause the server to listen only to the local host."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"When using SSL (see [member private_key] and [member ssl_certificate]), you "
-"can set this to a valid [X509Certificate] to be provided as additional CA "
-"chain information during the SSL handshake."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"The time in seconds before a pending client (i.e. a client that has not yet "
-"finished the HTTP handshake) is considered stale and forcefully disconnected."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"When set to a valid [CryptoKey] (along with [member ssl_certificate]) will "
-"cause the server to require SSL instead of regular TCP (i.e. the [code]wss://"
-"[/code] protocol)."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"When set to a valid [X509Certificate] (along with [member private_key]) will "
-"cause the server to require SSL instead of regular TCP (i.e. the [code]wss://"
-"[/code] protocol)."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Emitted when a client requests a clean close. You should keep polling until "
-"you get a [signal client_disconnected] signal with the same [code]id[/code] "
-"to achieve the clean close. See [method WebSocketPeer.close] for more "
-"details."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Emitted when a new client connects. \"protocol\" will be the sub-protocol "
-"agreed with the client."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Emitted when a client disconnects. [code]was_clean_close[/code] will be "
-"[code]true[/code] if the connection was shutdown cleanly."
-msgstr ""
-
-#: modules/websocket/doc_classes/WebSocketServer.xml
-msgid ""
-"Emitted when a new message is received.\n"
-"[b]Note:[/b] This signal is [i]not[/i] emitted when used as high-level "
-"multiplayer peer."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid "AR/VR interface using WebXR."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"WebXR is an open standard that allows creating VR and AR applications that "
-"run in the web browser.\n"
-"As such, this interface is only available when running in an HTML5 export.\n"
-"WebXR supports a wide range of devices, from the very capable (like Valve "
-"Index, HTC Vive, Oculus Rift and Quest) down to the much less capable (like "
-"Google Cardboard, Oculus Go, GearVR, or plain smartphones).\n"
-"Since WebXR is based on Javascript, it makes extensive use of callbacks, "
-"which means that [WebXRInterface] is forced to use signals, where other AR/"
-"VR interfaces would instead use functions that return a result immediately. "
-"This makes [WebXRInterface] quite a bit more complicated to initialize than "
-"other AR/VR interfaces.\n"
-"Here's the minimum code required to start an immersive VR session:\n"
-"[codeblock]\n"
-"extends Spatial\n"
-"\n"
-"var webxr_interface\n"
-"var vr_supported = false\n"
-"\n"
-"func _ready():\n"
-"    # We assume this node has a button as a child.\n"
-"    # This button is for the user to consent to entering immersive VR mode.\n"
-"    $Button.connect(\"pressed\", self, \"_on_Button_pressed\")\n"
-"\n"
-"    webxr_interface = ARVRServer.find_interface(\"WebXR\")\n"
-"    if webxr_interface:\n"
-"        # Map to the standard button/axis ids when possible.\n"
-"        webxr_interface.xr_standard_mapping = true\n"
-"\n"
-"        # WebXR uses a lot of asynchronous callbacks, so we connect to "
-"various\n"
-"        # signals in order to receive them.\n"
-"        webxr_interface.connect(\"session_supported\", self, "
-"\"_webxr_session_supported\")\n"
-"        webxr_interface.connect(\"session_started\", self, "
-"\"_webxr_session_started\")\n"
-"        webxr_interface.connect(\"session_ended\", self, "
-"\"_webxr_session_ended\")\n"
-"        webxr_interface.connect(\"session_failed\", self, "
-"\"_webxr_session_failed\")\n"
-"\n"
-"        # This returns immediately - our _webxr_session_supported() method\n"
-"        # (which we connected to the \"session_supported\" signal above) "
-"will\n"
-"        # be called sometime later to let us know if it's supported or not.\n"
-"        webxr_interface.is_session_supported(\"immersive-vr\")\n"
-"\n"
-"func _webxr_session_supported(session_mode, supported):\n"
-"    if session_mode == 'immersive-vr':\n"
-"        vr_supported = supported\n"
-"\n"
-"func _on_Button_pressed():\n"
-"    if not vr_supported:\n"
-"        OS.alert(\"Your browser doesn't support VR\")\n"
-"        return\n"
-"\n"
-"    # We want an immersive VR session, as opposed to AR ('immersive-ar') or "
-"a\n"
-"    # simple 3DoF viewer ('viewer').\n"
-"    webxr_interface.session_mode = 'immersive-vr'\n"
-"    # 'bounded-floor' is room scale, 'local-floor' is a standing or sitting\n"
-"    # experience (it puts you 1.6m above the ground if you have 3DoF "
-"headset),\n"
-"    # whereas as 'local' puts you down at the ARVROrigin.\n"
-"    # This list means it'll first try to request 'bounded-floor', then\n"
-"    # fallback on 'local-floor' and ultimately 'local', if nothing else is\n"
-"    # supported.\n"
-"    webxr_interface.requested_reference_space_types = 'bounded-floor, local-"
-"floor, local'\n"
-"    # In order to use 'local-floor' or 'bounded-floor' we must also\n"
-"    # mark the features as required or optional.\n"
-"    webxr_interface.required_features = 'local-floor'\n"
-"    webxr_interface.optional_features = 'bounded-floor'\n"
-"\n"
-"    # This will return false if we're unable to even request the session,\n"
-"    # however, it can still fail asynchronously later in the process, so we\n"
-"    # only know if it's really succeeded or failed when our\n"
-"    # _webxr_session_started() or _webxr_session_failed() methods are "
-"called.\n"
-"    if not webxr_interface.initialize():\n"
-"        OS.alert(\"Failed to initialize\")\n"
-"        return\n"
-"\n"
-"func _webxr_session_started():\n"
-"    $Button.visible = false\n"
-"    # This tells Godot to start rendering to the headset.\n"
-"    get_viewport().arvr = true\n"
-"    # This will be the reference space type you ultimately got, out of the\n"
-"    # types that you requested above. This is useful if you want the game "
-"to\n"
-"    # work a little differently in 'bounded-floor' versus 'local-floor'.\n"
-"    print (\"Reference space type: \" + webxr_interface."
-"reference_space_type)\n"
-"\n"
-"func _webxr_session_ended():\n"
-"    $Button.visible = true\n"
-"    # If the user exits immersive mode, then we tell Godot to render to the "
-"web\n"
-"    # page again.\n"
-"    get_viewport().arvr = false\n"
-"\n"
-"func _webxr_session_failed(message):\n"
-"    OS.alert(\"Failed to initialize: \" + message)\n"
-"[/codeblock]\n"
-"There are several ways to handle \"controller\" input:\n"
-"- Using [ARVRController] nodes and their [signal ARVRController."
-"button_pressed] and [signal ARVRController.button_release] signals. This is "
-"how controllers are typically handled in AR/VR apps in Godot, however, this "
-"will only work with advanced VR controllers like the Oculus Touch or Index "
-"controllers, for example. The buttons codes are defined by [url=https://"
-"immersive-web.github.io/webxr-gamepads-module/#xr-standard-gamepad-"
-"mapping]Section 3.3 of the WebXR Gamepads Module[/url].\n"
-"- Using [method Node._unhandled_input] and [InputEventJoypadButton] or "
-"[InputEventJoypadMotion]. This works the same as normal joypads, except the "
-"[member InputEvent.device] starts at 100, so the left controller is 100 and "
-"the right controller is 101, and the button codes are also defined by "
-"[url=https://immersive-web.github.io/webxr-gamepads-module/#xr-standard-"
-"gamepad-mapping]Section 3.3 of the WebXR Gamepads Module[/url].\n"
-"- Using the [signal select], [signal squeeze] and related signals. This "
-"method will work for both advanced VR controllers, and non-traditional "
-"\"controllers\" like a tap on the screen, a spoken voice command or a button "
-"press on the device itself. The [code]controller_id[/code] passed to these "
-"signals is the same id as used in [member ARVRController.controller_id].\n"
-"You can use one or all of these methods to allow your game or app to support "
-"a wider or narrower set of devices and input methods, or to allow more "
-"advanced interactions with more advanced devices."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid "How to make a VR game for WebXR with Godot"
-msgstr "Wie man ein VR-Spiel mit WebXR mit Godot erstellt"
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Gets an [ARVRPositionalTracker] for the given [code]controller_id[/code].\n"
-"In the context of WebXR, a \"controller\" can be an advanced VR controller "
-"like the Oculus Touch or Index controllers, or even a tap on the screen, a "
-"spoken voice command or a button press on the device itself. When a non-"
-"traditional controller is used, interpret the position and orientation of "
-"the [ARVRPositionalTracker] as a ray pointing at the object the user wishes "
-"to interact with.\n"
-"Use this method to get information about the controller that triggered one "
-"of these signals:\n"
-"- [signal selectstart]\n"
-"- [signal select]\n"
-"- [signal selectend]\n"
-"- [signal squeezestart]\n"
-"- [signal squeeze]\n"
-"- [signal squeezestart]"
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Returns the target ray mode for the given [code]controller_id[/code].\n"
-"This can help interpret the input coming from that controller. See "
-"[url=https://developer.mozilla.org/en-US/docs/Web/API/XRInputSource/"
-"targetRayMode]XRInputSource.targetRayMode[/url] for more information."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Checks if the given [code]session_mode[/code] is supported by the user's "
-"browser.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRSessionMode]WebXR's XRSessionMode[/url], including: [code]\"immersive-"
-"vr\"[/code], [code]\"immersive-ar\"[/code], and [code]\"inline\"[/code].\n"
-"This method returns nothing, instead it emits the [signal session_supported] "
-"signal with the result."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"The vertices of a polygon which defines the boundaries of the user's play "
-"area.\n"
-"This will only be available if [member reference_space_type] is "
-"[code]\"bounded-floor\"[/code] and only on certain browsers and devices that "
-"support it.\n"
-"The [signal reference_space_reset] signal may indicate when this changes."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"A comma-seperated list of optional features used by [method ARVRInterface."
-"initialize] when setting up the WebXR session.\n"
-"If a user's browser or device doesn't support one of the given features, "
-"initialization will continue, but you won't be able to use the requested "
-"feature.\n"
-"This doesn't have any effect on the interface when already initialized.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRReferenceSpaceType]WebXR's XRReferenceSpaceType[/url]. If you want to "
-"use a particular reference space type, it must be listed in either [member "
-"required_features] or [member optional_features]."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"The reference space type (from the list of requested types set in the "
-"[member requested_reference_space_types] property), that was ultimately used "
-"by [method ARVRInterface.initialize] when setting up the WebXR session.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRReferenceSpaceType]WebXR's XRReferenceSpaceType[/url]. If you want to "
-"use a particular reference space type, it must be listed in either [member "
-"required_features] or [member optional_features]."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"A comma-seperated list of reference space types used by [method "
-"ARVRInterface.initialize] when setting up the WebXR session.\n"
-"The reference space types are requested in order, and the first on supported "
-"by the users device or browser will be used. The [member "
-"reference_space_type] property contains the reference space type that was "
-"ultimately used.\n"
-"This doesn't have any effect on the interface when already initialized.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRReferenceSpaceType]WebXR's XRReferenceSpaceType[/url]. If you want to "
-"use a particular reference space type, it must be listed in either [member "
-"required_features] or [member optional_features]."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"A comma-seperated list of required features used by [method ARVRInterface."
-"initialize] when setting up the WebXR session.\n"
-"If a user's browser or device doesn't support one of the given features, "
-"initialization will fail and [signal session_failed] will be emitted.\n"
-"This doesn't have any effect on the interface when already initialized.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRReferenceSpaceType]WebXR's XRReferenceSpaceType[/url]. If you want to "
-"use a particular reference space type, it must be listed in either [member "
-"required_features] or [member optional_features]."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"The session mode used by [method ARVRInterface.initialize] when setting up "
-"the WebXR session.\n"
-"This doesn't have any effect on the interface when already initialized.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRSessionMode]WebXR's XRSessionMode[/url], including: [code]\"immersive-"
-"vr\"[/code], [code]\"immersive-ar\"[/code], and [code]\"inline\"[/code]."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Indicates if the WebXR session's imagery is visible to the user.\n"
-"Possible values come from [url=https://developer.mozilla.org/en-US/docs/Web/"
-"API/XRVisibilityState]WebXR's XRVisibilityState[/url], including "
-"[code]\"hidden\"[/code], [code]\"visible\"[/code], and [code]\"visible-"
-"blurred\"[/code]."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"If set to true, the button and axes ids will be converted to match the "
-"standard ids used by other AR/VR interfaces, when possible.\n"
-"Otherwise, the ids will be passed through unaltered from WebXR."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted to indicate that the reference space has been reset or "
-"reconfigured.\n"
-"When (or whether) this is emitted depends on the user's browser or device, "
-"but may include when the user has changed the dimensions of their play space "
-"(which you may be able to access via [member bounds_geometry]) or pressed/"
-"held a button to recenter their position.\n"
-"See [url=https://developer.mozilla.org/en-US/docs/Web/API/XRReferenceSpace/"
-"reset_event]WebXR's XRReferenceSpace reset event[/url] for more information."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted after one of the \"controllers\" has finished its \"primary "
-"action\".\n"
-"Use [method get_controller] to get more information about the controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted when one of the \"controllers\" has finished its \"primary "
-"action\".\n"
-"Use [method get_controller] to get more information about the controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted when one of the \"controllers\" has started its \"primary action\".\n"
-"Use [method get_controller] to get more information about the controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted when the user ends the WebXR session (which can be done using UI "
-"from the browser or device).\n"
-"At this point, you should do [code]get_viewport().arvr = false[/code] to "
-"instruct Godot to resume rendering to the screen."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted by [method ARVRInterface.initialize] if the session fails to start.\n"
-"[code]message[/code] may optionally contain an error message from WebXR, or "
-"an empty string if no message is available."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted by [method ARVRInterface.initialize] if the session is successfully "
-"started.\n"
-"At this point, it's safe to do [code]get_viewport().arvr = true[/code] to "
-"instruct Godot to start rendering to the AR/VR device."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted by [method is_session_supported] to indicate if the given "
-"[code]session_mode[/code] is supported or not."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted after one of the \"controllers\" has finished its \"primary squeeze "
-"action\".\n"
-"Use [method get_controller] to get more information about the controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted when one of the \"controllers\" has finished its \"primary squeeze "
-"action\".\n"
-"Use [method get_controller] to get more information about the controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Emitted when one of the \"controllers\" has started its \"primary squeeze "
-"action\".\n"
-"Use [method get_controller] to get more information about the controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-#, fuzzy
-msgid "Emitted when [member visibility_state] has changed."
-msgstr "Wird ausgegeben, wenn [member frame] geändert wurde."
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid "We don't know the target ray mode."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid ""
-"Target ray originates at the viewer's eyes and points in the direction they "
-"are looking."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid "Target ray from a handheld pointer, most likely a VR touch controller."
-msgstr ""
-
-#: modules/webxr/doc_classes/WebXRInterface.xml
-msgid "Target ray from touch screen, mouse or other tactile input device."
-msgstr ""
-"Ziel-Strahl für einen Touch-Screen, eine Computer-Maus oder ein taktisches "
-"Eingabegerät."
-
-#: doc/classes/WindowDialog.xml
-msgid "Base class for window dialogs."
-msgstr "Basis-Klasse für Fenster-Dialoge."
-
-#: doc/classes/WindowDialog.xml
-msgid ""
-"Windowdialog is the base class for all window-based dialogs. It's a by-"
-"default toplevel [Control] that draws a window decoration and allows motion "
-"and resizing."
-msgstr ""
-
-#: doc/classes/WindowDialog.xml
-msgid ""
-"Returns the close [TextureButton].\n"
-"[b]Warning:[/b] This is a required internal node, removing and freeing it "
-"may cause a crash. If you wish to hide it or any of its children, use their "
-"[member CanvasItem.visible] property."
-msgstr ""
-
-#: doc/classes/WindowDialog.xml
-#, fuzzy
-msgid "If [code]true[/code], the user can resize the window."
-msgstr "Wenn [code]true[/code], ist die Filterung aktiviert."
-
-#: doc/classes/WindowDialog.xml
-#, fuzzy
-msgid "The text displayed in the window's title bar."
-msgstr "Der vom Dialog angezeigte Text."
-
-#: doc/classes/WindowDialog.xml
-#, fuzzy
-msgid "The color of the title text."
-msgstr "Die Farbe des spiegelnden Lichteffekts."
-
-#: doc/classes/WindowDialog.xml
-msgid "The horizontal offset of the close button."
-msgstr "Die horizontale Verschiebung des \"Schließen\"-Buttons."
-
-#: doc/classes/WindowDialog.xml
-msgid ""
-"The thickness of the border that can be dragged when scaling the window (if "
-"[member resizable] is enabled)."
-msgstr ""
-"Die Breite der Kante, die zum Anpassen der Fenstergröße genutzt werden kann "
-"(wenn [member resizable] aktiviert ist)."
-
-#: doc/classes/WindowDialog.xml
-msgid "The vertical offset of the title text."
-msgstr "Die vertikale Verschiebung des Titel-Textes."
-
-#: doc/classes/WindowDialog.xml
-msgid "The font used to draw the title."
-msgstr "Die Schriftart die für den Titel verwendet wird."
-
-#: doc/classes/WindowDialog.xml
-#, fuzzy
-msgid "The icon for the close button."
-msgstr "Linke Maustaste."
-
-#: doc/classes/WindowDialog.xml
-msgid ""
-"The icon used for the close button when it's hovered with the mouse cursor."
-msgstr ""
-"Das Bild, das für den \"Schließen\"-Button verwendet wird, wenn mit der Maus "
-"über diesem ist."
-
-#: doc/classes/WindowDialog.xml
-msgid ""
-"The style for both the content background of the [WindowDialog] and the "
-"title bar. The title bar is created with a top border and an expand margin "
-"using the [code]panel[/code] stylebox."
-msgstr ""
-
-#: doc/classes/World.xml
-msgid "Class that has everything pertaining to a world."
-msgstr "Eine Klasse die alles für eine Welt mitbringt."
-
-#: doc/classes/World.xml
-#, fuzzy
-msgid ""
-"Class that has everything pertaining to a world. A physics space, a visual "
-"scenario, a navigation map and a sound space. Spatial nodes register their "
-"resources into the current world."
-msgstr ""
-"Eine Klasse die alles für eine 2D Welt mitbringt. Einen physikalischen Raum, "
-"ein visuelles Szenario und einen Bereich für Sounds. 2D Knotenpunkte "
-"registrieren ihre Resourcen in die aktuelle 2D Welt."
-
-#: doc/classes/World.xml
-msgid ""
-"Direct access to the world's physics 3D space state. Used for querying "
-"current and potential collisions."
-msgstr ""
-"Direkter Zugang zu dem physischen Zustand des 3D Raums der Welt. Wird "
-"genutzt um aktuelle oder zukünftige Kollisionen abzufragen."
-
-#: doc/classes/World.xml
-msgid "The World's [Environment]."
-msgstr "Das [Environment] der Welt."
-
-#: doc/classes/World.xml
-#, fuzzy
-msgid ""
-"The World's fallback environment will be used if [member environment] fails "
-"or is missing."
-msgstr ""
-"Das fallback_environment der Welt wird genutzt, sollte das [Environment] der "
-"Welt nicht existieren oder nicht geladen werden können."
-
-#: doc/classes/World.xml
-#, fuzzy
-msgid ""
-"The [RID] of this world's navigation map. Used by the [NavigationServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/World.xml
-msgid "The World's visual scenario."
-msgstr "Das visuelle Szenario der Welt."
-
-#: doc/classes/World.xml
-msgid "The World's physics space."
-msgstr "The physikalische Raum der Welt."
-
-#: doc/classes/World2D.xml
-msgid "Class that has everything pertaining to a 2D world."
-msgstr "Eine Klasse die alles für eine 2D Welt mitbringt."
-
-#: doc/classes/World2D.xml
-#, fuzzy
-msgid ""
-"Class that has everything pertaining to a 2D world. A physics space, a "
-"visual scenario, a navigation map and a sound space. 2D nodes register their "
-"resources into the current 2D world."
-msgstr ""
-"Eine Klasse die alles für eine 2D Welt mitbringt. Einen physikalischen Raum, "
-"ein visuelles Szenario und einen Bereich für Sounds. 2D Knotenpunkte "
-"registrieren ihre Resourcen in die aktuelle 2D Welt."
-
-#: doc/classes/World2D.xml
-msgid ""
-"The [RID] of this world's canvas resource. Used by the [VisualServer] for 2D "
-"drawing."
-msgstr ""
-"Die [RID] der Canvas Resource dieser Welt. Wird von [VisualServer] für 2D-"
-"Zeichnungen genutzt."
-
-#: doc/classes/World2D.xml
-msgid ""
-"Direct access to the world's physics 2D space state. Used for querying "
-"current and potential collisions. When using multi-threaded physics, access "
-"is limited to [code]_physics_process(delta)[/code] in the main thread."
-msgstr ""
-
-#: doc/classes/World2D.xml
-#, fuzzy
-msgid ""
-"The [RID] of this world's navigation map. Used by the [Navigation2DServer]."
-msgstr "Gibt die Anzahl der Spuren in der Animation zurück."
-
-#: doc/classes/World2D.xml
-msgid ""
-"The [RID] of this world's physics space resource. Used by the "
-"[Physics2DServer] for 2D physics, treating it as both a space and an area."
-msgstr ""
-
-#: doc/classes/WorldEnvironment.xml
-msgid ""
-"Default environment properties for the entire scene (post-processing "
-"effects, lighting and background settings)."
-msgstr ""
-"Standartmäßige Umwelteigenschaften für die gesamte Szene "
-"(Bildnachbearbeitungs-Effekte, Beleuchtung und Hintergrund)."
-
-#: doc/classes/WorldEnvironment.xml
-msgid ""
-"The [WorldEnvironment] node is used to configure the default [Environment] "
-"for the scene.\n"
-"The parameters defined in the [WorldEnvironment] can be overridden by an "
-"[Environment] node set on the current [Camera]. Additionally, only one "
-"[WorldEnvironment] may be instanced in a given scene at a time.\n"
-"The [WorldEnvironment] allows the user to specify default lighting "
-"parameters (e.g. ambient lighting), various post-processing effects (e.g. "
-"SSAO, DOF, Tonemapping), and how to draw the background (e.g. solid color, "
-"skybox). Usually, these are added in order to improve the realism/color "
-"balance of the scene."
-msgstr ""
-
-#: doc/classes/WorldEnvironment.xml
-msgid ""
-"The [Environment] resource used by this [WorldEnvironment], defining the "
-"default properties."
-msgstr ""
-
-#: doc/classes/X509Certificate.xml
-msgid "An X509 certificate (e.g. for SSL)."
-msgstr "Ein X509-Zertifikat (z.B. für SSL)."
-
-#: doc/classes/X509Certificate.xml
-msgid ""
-"The X509Certificate class represents an X509 certificate. Certificates can "
-"be loaded and saved like any other [Resource].\n"
-"They can be used as the server certificate in [method StreamPeerSSL."
-"accept_stream] (along with the proper [CryptoKey]), and to specify the only "
-"certificate that should be accepted when connecting to an SSL server via "
-"[method StreamPeerSSL.connect_to_stream]."
-msgstr ""
-
-#: doc/classes/X509Certificate.xml
-msgid "Loads a certificate from [code]path[/code] (\"*.crt\" file)."
-msgstr "Lädt ein Zertifikat vom Pfad [code]path[/code] (\"*.crt\" Datei)."
-
-#: doc/classes/X509Certificate.xml
-msgid ""
-"Saves a certificate to the given [code]path[/code] (should be a \"*.crt\" "
-"file)."
-msgstr ""
-"Speichert ein Zertifikat am angegebenen [code]path[/code] (sollte eine \"*."
-"crt\" Datei sein)."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Low-level class for creating parsers for [url=https://en.wikipedia.org/wiki/"
-"XML]XML[/url] files."
-msgstr ""
-"Niedrig-levelige Klasse um Parser für [url=https://en.wikipedia.org/wiki/"
-"XML]XML[/url]-Dateien zu erstellen."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"This class can serve as base to make custom XML parsers. Since XML is a very "
-"flexible standard, this interface is low-level so it can be applied to any "
-"possible schema."
-msgstr ""
-"Diese Klasse kann als Grundlage für eigene XML Parser genutzt werden. Da XML "
-"ein sehr flexibler Standard ist, kann dieses niedrig-levelige Interface an "
-"jedes beliebige Schema angepasst werden."
-
-#: doc/classes/XMLParser.xml
-msgid "Gets the amount of attributes in the current element."
-msgstr "Gibt die Anzahl an Attributen des aktuellen Elements zurück."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the name of the attribute specified by the index in [code]idx[/code] "
-"argument."
-msgstr ""
-"Gibt den Namen des Attributes zurück, dass durch den Index in dem [code]idx[/"
-"code] Argument spezifiziert wird."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the value of the attribute specified by the index in [code]idx[/code] "
-"argument."
-msgstr ""
-"Gibt den Wert eines Attributes zurück, das durch den Index in dem [code]idx[/"
-"code] Argument spezifiziert wird."
-
-#: doc/classes/XMLParser.xml
-msgid "Gets the current line in the parsed file (currently not implemented)."
-msgstr ""
-"Gibt die aktuelle Zeile in der geöffneten Datei zurück (aktuell nicht "
-"implementiert)."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the value of a certain attribute of the current element by name. This "
-"will raise an error if the element has no such attribute."
-msgstr ""
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the value of a certain attribute of the current element by name. This "
-"will return an empty [String] if the attribute is not found."
-msgstr ""
-"Gibt den Wert eines bestimmten Attributes innerhalb des aktuellen Elementes "
-"zurück, dass den gesuchten Namen besitzt. Der Rückgabewert ist ein leerer "
-"[String], sollte das Attribut nicht gefunden werden."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the contents of a text node. This will raise an error in any other type "
-"of node."
-msgstr ""
-"Gibt den Inhalt eines Text-Knotenpunkts zurück. Sollte der Knotenpunkt ein "
-"anderer Typ sein, so wird ein Fehler geworfen."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the name of the current element node. This will raise an error if the "
-"current node type is neither [constant NODE_ELEMENT] nor [constant "
-"NODE_ELEMENT_END]."
-msgstr ""
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the byte offset of the current node since the beginning of the file or "
-"buffer."
-msgstr ""
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Gets the type of the current node. Compare with [enum NodeType] constants."
-msgstr ""
-"Gibt den Typ des aktuellen Knotenpunkts zurück. Der Typ kann mit den [enum "
-"NodeType] Konstanten verglichen werden."
-
-#: doc/classes/XMLParser.xml
-msgid "Check whether the current element has a certain attribute."
-msgstr "Überprüft, ob das aktuelle Element einen bestimmtes Attribut enthält."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Check whether the current element is empty (this only works for completely "
-"empty tags, e.g. [code]<element \\>[/code])."
-msgstr ""
-
-#: doc/classes/XMLParser.xml
-msgid "Opens an XML file for parsing. This returns an error code."
-msgstr "Öffnet eine XML-Datei zum Parsen. Der Rückgabewert ist ein Fehlercode."
-
-#: doc/classes/XMLParser.xml
-msgid "Opens an XML raw buffer for parsing. This returns an error code."
-msgstr ""
-"Öffnet einen unbearbeiteten Buffer zum Parsen. Der Rückgabewert ist ein "
-"Fehlercode."
-
-#: doc/classes/XMLParser.xml
-msgid "Reads the next node of the file. This returns an error code."
-msgstr ""
-"Liest den Text-Knotenpunkt der Datei aus. Der Reückgabewert ist ein "
-"Fehlercode."
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Moves the buffer cursor to a certain offset (since the beginning) and read "
-"the next node there. This returns an error code."
-msgstr ""
-
-#: doc/classes/XMLParser.xml
-msgid ""
-"Skips the current section. If the node contains other elements, they will be "
-"ignored and the cursor will go to the closing of the current element."
-msgstr ""
-
-#: doc/classes/XMLParser.xml
-msgid "There's no node (no file or buffer opened)."
-msgstr ""
-"Es ist kein Knotenpunkt verfügbar (da keine Datei oder kein Buffer geöffnet "
-"wurde)."
-
-#: doc/classes/XMLParser.xml
-msgid "Element (tag)."
-msgstr "Element (Tag)."
-
-#: doc/classes/XMLParser.xml
-msgid "End of element."
-msgstr "Ende des Elements."
-
-#: doc/classes/XMLParser.xml
-msgid "Text node."
-msgstr "Text-Knotenpunkt."
-
-#: doc/classes/XMLParser.xml
-msgid "Comment node."
-msgstr "Kommentar-Knotenpunkt."
-
-#: doc/classes/XMLParser.xml
-msgid "CDATA content."
-msgstr "CDATA Inhalt."
-
-#: doc/classes/XMLParser.xml
-msgid "Unknown node."
-msgstr "unbekanntes Node."
-
-#: doc/classes/YSort.xml
-msgid "Sort all child nodes based on their Y positions."
-msgstr "Sotiert alle Kind-Knotenpunkte basierend auf ihrer Y-Position."
-
-#: doc/classes/YSort.xml
-msgid ""
-"Sort all child nodes based on their Y positions. The child node must inherit "
-"from [CanvasItem] for it to be sorted. Nodes that have a higher Y position "
-"will be drawn later, so they will appear on top of nodes that have a lower Y "
-"position.\n"
-"Nesting of YSort nodes is possible. Children YSort nodes will be sorted in "
-"the same space as the parent YSort, allowing to better organize a scene or "
-"divide it in multiple ones, yet keep the unique sorting."
-msgstr ""
-
-#: doc/classes/YSort.xml
-msgid ""
-"If [code]true[/code], child nodes are sorted, otherwise sorting is disabled."
-msgstr ""
-"Wenn [code]true[/code], dann werden untergeordnete Nodes sortiert, "
-"anderenfalls wird die Sortierung deaktiviert."